diff options
| -rw-r--r-- | MAINTAINERS | 4 | ||||
| -rw-r--r-- | Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-exynos/gpio.h | 17 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-exynos/mmc.h | 6 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-s5pc1xx/mmc.h | 6 | ||||
| -rw-r--r-- | board/samsung/arndale/Makefile | 34 | ||||
| -rw-r--r-- | board/samsung/arndale/arndale.c | 101 | ||||
| -rw-r--r-- | board/samsung/arndale/arndale_spl.c | 50 | ||||
| -rw-r--r-- | board/samsung/dts/exynos5250-arndale.dts | 39 | ||||
| -rw-r--r-- | board/samsung/goni/config.mk | 18 | ||||
| -rw-r--r-- | board/samsung/goni/goni.c | 33 | ||||
| -rw-r--r-- | board/samsung/smdkc100/config.mk | 16 | ||||
| -rw-r--r-- | boards.cfg | 1 | ||||
| -rw-r--r-- | drivers/power/pmic/pmic_max77686.c | 192 | ||||
| -rw-r--r-- | include/configs/arndale.h | 255 | ||||
| -rw-r--r-- | include/configs/exynos5250-dt.h | 2 | ||||
| -rw-r--r-- | include/configs/s5p_goni.h | 3 | ||||
| -rw-r--r-- | include/configs/smdkc100.h | 3 | ||||
| -rw-r--r-- | include/power/max77686_pmic.h | 26 | ||||
| -rw-r--r-- | tools/Makefile | 3 |
20 files changed, 766 insertions, 45 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 0807727..86a5ce4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -464,6 +464,10 @@ Andre Schwarz <andre.schwarz@matrix-vision.de> mvblm7 MPC8343 mvsmr MPC5200 +Inderpal Singh <inderpal.singh@linaro.org> + + Arndale ARM ARMV7 (EXYNOS5250 SoC) + Jon Smirl <jonsmirl@gmail.com> pcm030 MPC5200 @@ -866,7 +866,7 @@ clean: $(obj)tools/gdb/{astest,gdbcont,gdbsend} \ $(obj)tools/gen_eth_addr $(obj)tools/img2srec \ $(obj)tools/mk{env,}image $(obj)tools/mpc86x_clk \ - $(obj)tools/mk{smdk5250,}spl \ + $(obj)tools/mk{$(BOARD),}spl \ $(obj)tools/mxsboot \ $(obj)tools/ncb $(obj)tools/ubsha1 \ $(obj)tools/kernel-doc/docproc \ diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h index e955811..a1a7439 100644 --- a/arch/arm/include/asm/arch-exynos/gpio.h +++ b/arch/arm/include/asm/arch-exynos/gpio.h @@ -290,10 +290,19 @@ static inline unsigned int s5p_gpio_part_max(int nr) return EXYNOS5_GPIO_PART2_MAX; } else if (cpu_is_exynos4()) { - if (nr < EXYNOS4_GPIO_PART1_MAX) - return 0; - else - return EXYNOS4_GPIO_PART1_MAX; + if (proid_is_exynos4412()) { + if (nr < EXYNOS4X12_GPIO_PART1_MAX) + return 0; + else if (nr < EXYNOS4X12_GPIO_PART2_MAX) + return EXYNOS4X12_GPIO_PART1_MAX; + else + return EXYNOS4X12_GPIO_PART2_MAX; + } else { + if (nr < EXYNOS4_GPIO_PART1_MAX) + return 0; + else + return EXYNOS4_GPIO_PART1_MAX; + } } return 0; diff --git a/arch/arm/include/asm/arch-exynos/mmc.h b/arch/arm/include/asm/arch-exynos/mmc.h index 96610b8..98312d1 100644 --- a/arch/arm/include/asm/arch-exynos/mmc.h +++ b/arch/arm/include/asm/arch-exynos/mmc.h @@ -8,6 +8,8 @@ #ifndef __ASM_ARCH_MMC_H_ #define __ASM_ARCH_MMC_H_ +#define S5P_MMC_DEV_OFFSET 0x10000 + #define SDHCI_CONTROL2 0x80 #define SDHCI_CONTROL3 0x84 #define SDHCI_CONTROL4 0x8C @@ -55,7 +57,9 @@ int s5p_sdhci_init(u32 regbase, int index, int bus_width); static inline unsigned int s5p_mmc_init(int index, int bus_width) { - unsigned int base = samsung_get_base_mmc() + (0x10000 * index); + unsigned int base = samsung_get_base_mmc() + + (S5P_MMC_DEV_OFFSET * index); + return s5p_sdhci_init(base, index, bus_width); } #endif diff --git a/arch/arm/include/asm/arch-s5pc1xx/mmc.h b/arch/arm/include/asm/arch-s5pc1xx/mmc.h index 96610b8..55ff10b 100644 --- a/arch/arm/include/asm/arch-s5pc1xx/mmc.h +++ b/arch/arm/include/asm/arch-s5pc1xx/mmc.h @@ -8,6 +8,8 @@ #ifndef __ASM_ARCH_MMC_H_ #define __ASM_ARCH_MMC_H_ +#define S5P_MMC_DEV_OFFSET 0x100000 + #define SDHCI_CONTROL2 0x80 #define SDHCI_CONTROL3 0x84 #define SDHCI_CONTROL4 0x8C @@ -55,7 +57,9 @@ int s5p_sdhci_init(u32 regbase, int index, int bus_width); static inline unsigned int s5p_mmc_init(int index, int bus_width) { - unsigned int base = samsung_get_base_mmc() + (0x10000 * index); + unsigned int base = samsung_get_base_mmc() + + (S5P_MMC_DEV_OFFSET * index); + return s5p_sdhci_init(base, index, bus_width); } #endif diff --git a/board/samsung/arndale/Makefile b/board/samsung/arndale/Makefile new file mode 100644 index 0000000..afd8db3 --- /dev/null +++ b/board/samsung/arndale/Makefile @@ -0,0 +1,34 @@ +# +# Copyright (C) 2013 Samsung Electronics +# +# SPDX-License-Identifier: GPL-2.0+ +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS += arndale_spl.o + +ifndef CONFIG_SPL_BUILD +COBJS += arndale.o +endif + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) + +ALL := $(obj).depend $(LIB) + +all: $(ALL) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/samsung/arndale/arndale.c b/board/samsung/arndale/arndale.c new file mode 100644 index 0000000..052fecd --- /dev/null +++ b/board/samsung/arndale/arndale.c @@ -0,0 +1,101 @@ +/* + * Copyright (C) 2013 Samsung Electronics + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/dwmmc.h> +#include <asm/arch/power.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL); + return 0; +} + +int dram_init(void) +{ + int i; + u32 addr; + + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { + addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE); + gd->ram_size += get_ram_size((long *)addr, SDRAM_BANK_SIZE); + } + return 0; +} + +int power_init_board(void) +{ + set_ps_hold_ctrl(); + return 0; +} + +void dram_init_banksize(void) +{ + int i; + u32 addr, size; + + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { + addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE); + size = get_ram_size((long *)addr, SDRAM_BANK_SIZE); + + gd->bd->bi_dram[i].start = addr; + gd->bd->bi_dram[i].size = size; + } +} + +#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + int ret; + /* dwmmc initializattion for available channels */ + ret = exynos_dwmmc_init(gd->fdt_blob); + if (ret) + debug("dwmmc init failed\n"); + + return ret; +} +#endif + +static int board_uart_init(void) +{ + int err = 0, uart_id; + + for (uart_id = PERIPH_ID_UART0; uart_id <= PERIPH_ID_UART3; uart_id++) { + err = exynos_pinmux_config(uart_id, PINMUX_FLAG_NONE); + if (err) { + debug("UART%d not configured\n", + (uart_id - PERIPH_ID_UART0)); + return err; + } + } + return err; +} + +#ifdef CONFIG_BOARD_EARLY_INIT_F +int board_early_init_f(void) +{ + int err; + + err = board_uart_init(); + if (err) { + debug("UART init failed\n"); + return err; + } + return err; +} +#endif + +#ifdef CONFIG_DISPLAY_BOARDINFO +int checkboard(void) +{ + printf("\nBoard: Arndale\n"); + + return 0; +} +#endif diff --git a/board/samsung/arndale/arndale_spl.c b/board/samsung/arndale/arndale_spl.c new file mode 100644 index 0000000..2949c08 --- /dev/null +++ b/board/samsung/arndale/arndale_spl.c @@ -0,0 +1,50 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/spl.h> + +#define SIGNATURE 0xdeadbeef + +/* Parameters of early board initialization in SPL */ +static struct spl_machine_param machine_param + __attribute__((section(".machine_param"))) = { + .signature = SIGNATURE, + .version = 1, + .params = "vmubfasirM", + .size = sizeof(machine_param), + + .mem_iv_size = 0x1f, + .mem_type = DDR_MODE_DDR3, + + /* + * Set uboot_size to 0x100000 bytes. + * + * This is an overly conservative value chosen to accommodate all + * possible U-Boot image. You are advised to set this value to a + * smaller realistic size via scripts that modifies the .machine_param + * section of output U-Boot image. + */ + .uboot_size = 0x100000, + + .boot_source = BOOT_MODE_OM, + .frequency_mhz = 800, + .arm_freq_mhz = 1000, + .serial_base = 0x12c30000, + .i2c_base = 0x12c60000, + .mem_manuf = MEM_MANUF_SAMSUNG, +}; + +struct spl_machine_param *spl_get_machine_params(void) +{ + if (machine_param.signature != SIGNATURE) { + /* Will hang if SIGNATURE dont match */ + while (1) + ; + } + + return &machine_param; +} diff --git a/board/samsung/dts/exynos5250-arndale.dts b/board/samsung/dts/exynos5250-arndale.dts new file mode 100644 index 0000000..202f2ea --- /dev/null +++ b/board/samsung/dts/exynos5250-arndale.dts @@ -0,0 +1,39 @@ +/* + * SAMSUNG Arndale board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SPDX-License-Identifier: GPL-2.0+ +*/ + +/dts-v1/; +#include "exynos5250.dtsi" + +/ { + model = "SAMSUNG Arndale board based on EXYNOS5250"; + compatible = "samsung,arndale", "samsung,exynos5250"; + + aliases { + serial0 = "/serial@12C20000"; + console = "/serial@12C20000"; + }; + + mmc@12200000 { + samsung,bus-width = <8>; + samsung,timing = <1 3 3>; + }; + + mmc@12210000 { + status = "disabled"; + }; + + mmc@12220000 { + samsung,bus-width = <4>; + samsung,timing = <1 2 3>; + }; + + mmc@12230000 { + status = "disabled"; + }; +}; diff --git a/board/samsung/goni/config.mk b/board/samsung/goni/config.mk deleted file mode 100644 index e1cadbc..0000000 --- a/board/samsung/goni/config.mk +++ /dev/null @@ -1,18 +0,0 @@ -# -# Copyright (C) 2010 Samsung Electronics -# Kyungmin Park <kyungmin.park@samsung.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# On S5PC100 we use the 128 MiB OneDRAM bank at -# -# 0x30000000 to 0x35000000 (80MiB) -# 0x38000000 to 0x40000000 (128MiB) -# -# On S5PC110 we use the 128 MiB OneDRAM bank at -# -# 0x30000000 to 0x35000000 (80MiB) -# 0x40000000 to 0x50000000 (256MiB) -# -CONFIG_SYS_TEXT_BASE = 0x34800000 diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c index 5b3d6ef..366f648 100644 --- a/board/samsung/goni/goni.c +++ b/board/samsung/goni/goni.c @@ -72,7 +72,7 @@ int checkboard(void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) { - int i; + int i, ret, ret_sd = 0; /* MASSMEMORY_EN: XMSMDATA7: GPJ2[7] output high */ s5p_gpio_direction_output(&s5pc110_gpio->j2, 7, 1); @@ -95,7 +95,36 @@ int board_mmc_init(bd_t *bis) s5p_gpio_set_drv(&s5pc110_gpio->g0, i, GPIO_DRV_4X); } - return s5p_mmc_init(0, 4); + ret = s5p_mmc_init(0, 4); + if (ret) + error("MMC: Failed to init MMC:0.\n"); + + /* + * SD card (T_FLASH) detect and init + * T_FLASH_DETECT: EINT28: GPH3[4] input mode + */ + s5p_gpio_cfg_pin(&s5pc110_gpio->h3, 4, GPIO_INPUT); + s5p_gpio_set_pull(&s5pc110_gpio->h3, 4, GPIO_PULL_UP); + + if (!s5p_gpio_get_value(&s5pc110_gpio->h3, 4)) { + for (i = 0; i < 7; i++) { + if (i == 2) + continue; + + /* GPG2[0:6] special function 2 */ + s5p_gpio_cfg_pin(&s5pc110_gpio->g2, i, 0x2); + /* GPG2[0:6] pull disable */ + s5p_gpio_set_pull(&s5pc110_gpio->g2, i, GPIO_PULL_NONE); + /* GPG2[0:6] drv 4x */ + s5p_gpio_set_drv(&s5pc110_gpio->g2, i, GPIO_DRV_4X); + } + + ret_sd = s5p_mmc_init(2, 4); + if (ret_sd) + error("MMC: Failed to init SD card (MMC:2).\n"); + } + + return ret & ret_sd; } #endif diff --git a/board/samsung/smdkc100/config.mk b/board/samsung/smdkc100/config.mk deleted file mode 100644 index 3a08bb1..0000000 --- a/board/samsung/smdkc100/config.mk +++ /dev/null @@ -1,16 +0,0 @@ -# -# Copyright (C) 2008 # Samsung Elecgtronics -# Kyungmin Park <kyungmin.park@samsung.com> -# - -# On S5PC100 we use the 128 MiB OneDRAM bank at -# -# 0x30000000 to 0x35000000 (80MiB) -# 0x38000000 to 0x40000000 (128MiB) -# -# On S5PC110 we use the 128 MiB OneDRAM bank at -# -# 0x30000000 to 0x35000000 (80MiB) -# 0x40000000 to 0x48000000 (128MiB) -# -CONFIG_SYS_TEXT_BASE = 0x34800000 @@ -327,6 +327,7 @@ omap5_uevm arm armv7 omap5_uevm ti oma dra7xx_evm arm armv7 dra7xx ti omap5 s5p_goni arm armv7 goni samsung s5pc1xx smdkc100 arm armv7 smdkc100 samsung s5pc1xx +arndale arm armv7 arndale samsung exynos origen arm armv7 origen samsung exynos s5pc210_universal arm armv7 universal_c210 samsung exynos snow arm armv7 smdk5250 samsung exynos diff --git a/drivers/power/pmic/pmic_max77686.c b/drivers/power/pmic/pmic_max77686.c index 7208e5b..d4c430e 100644 --- a/drivers/power/pmic/pmic_max77686.c +++ b/drivers/power/pmic/pmic_max77686.c @@ -14,6 +14,198 @@ DECLARE_GLOBAL_DATA_PTR; +static const char max77686_buck_addr[] = { + 0xff, 0x10, 0x12, 0x1c, 0x26, 0x30, 0x32, 0x34, 0x36, 0x38 +}; + +static unsigned int max77686_ldo_volt2hex(int ldo, ulong uV) +{ + unsigned int hex = 0; + + switch (ldo) { + case 1: + case 2: + case 6: + case 7: + case 8: + case 15: + hex = (uV - 800000) / 25000; + break; + default: + hex = (uV - 800000) / 50000; + } + + if (hex >= 0 && hex <= MAX77686_LDO_VOLT_MAX_HEX) + return hex; + + debug("%s: %ld is wrong voltage value for LDO%d\n", __func__, uV, ldo); + return 0; +} + +int max77686_set_ldo_voltage(struct pmic *p, int ldo, ulong uV) +{ + unsigned int val, ret, hex, adr; + + if (ldo < 1 && ldo > 26) { + printf("%s: %d is wrong ldo number\n", __func__, ldo); + return -1; + } + + adr = MAX77686_REG_PMIC_LDO1CTRL1 + ldo - 1; + hex = max77686_ldo_volt2hex(ldo, uV); + + if (!hex) + return -1; + + ret = pmic_reg_read(p, adr, &val); + if (ret) + return ret; + + val &= ~MAX77686_LDO_VOLT_MASK; + val |= hex; + ret |= pmic_reg_write(p, adr, val); + + return ret; +} + +int max77686_set_ldo_mode(struct pmic *p, int ldo, char opmode) +{ + unsigned int val, ret, adr, mode; + + if (ldo < 1 && 26 < ldo) { + printf("%s: %d is wrong ldo number\n", __func__, ldo); + return -1; + } + + adr = MAX77686_REG_PMIC_LDO1CTRL1 + ldo - 1; + + /* mode */ + switch (opmode) { + case OPMODE_OFF: + mode = MAX77686_LDO_MODE_OFF; + break; + case OPMODE_STANDBY: + switch (ldo) { + case 2: + case 6: + case 7: + case 8: + case 10: + case 11: + case 12: + case 14: + case 15: + case 16: + mode = MAX77686_LDO_MODE_STANDBY; + break; + default: + mode = 0xff; + } + break; + case OPMODE_LPM: + mode = MAX77686_LDO_MODE_LPM; + break; + case OPMODE_ON: + mode = MAX77686_LDO_MODE_ON; + break; + default: + mode = 0xff; + } + + if (mode == 0xff) { + printf("%s: %d is not supported on LDO%d\n", + __func__, opmode, ldo); + return -1; + } + + ret = pmic_reg_read(p, adr, &val); + if (ret) + return ret; + + val &= ~MAX77686_LDO_MODE_MASK; + val |= mode; + ret |= pmic_reg_write(p, adr, val); + + return ret; +} + +int max77686_set_buck_mode(struct pmic *p, int buck, char opmode) +{ + unsigned int val, ret, mask, adr, size, mode, mode_shift; + + size = ARRAY_SIZE(max77686_buck_addr); + if (buck >= size) { + printf("%s: %d is wrong buck number\n", __func__, buck); + return -1; + } + + adr = max77686_buck_addr[buck]; + + /* mask */ + switch (buck) { + case 2: + case 3: + case 4: + mode_shift = MAX77686_BUCK_MODE_SHIFT_2; + break; + default: + mode_shift = MAX77686_BUCK_MODE_SHIFT_1; + } + + mask = MAX77686_BUCK_MODE_MASK << mode_shift; + + /* mode */ + switch (opmode) { + case OPMODE_OFF: + mode = MAX77686_BUCK_MODE_OFF; + break; + case OPMODE_STANDBY: + switch (buck) { + case 1: + case 2: + case 3: + case 4: + mode = MAX77686_BUCK_MODE_STANDBY << mode_shift; + break; + default: + mode = 0xff; + } + break; + case OPMODE_LPM: + switch (buck) { + case 2: + case 3: + case 4: + mode = MAX77686_BUCK_MODE_LPM << mode_shift; + break; + default: + mode = 0xff; + } + break; + case OPMODE_ON: + mode = MAX77686_BUCK_MODE_ON << mode_shift; + break; + default: + mode = 0xff; + } + + if (mode == 0xff) { + printf("%s: %d is not supported on BUCK%d\n", + __func__, opmode, buck); + return -1; + } + + ret = pmic_reg_read(p, adr, &val); + if (ret) + return ret; + + val &= ~mask; + val |= mode; + ret |= pmic_reg_write(p, adr, val); + + return ret; +} + int pmic_init(unsigned char bus) { static const char name[] = "MAX77686_PMIC"; diff --git a/include/configs/arndale.h b/include/configs/arndale.h new file mode 100644 index 0000000..ed44a04 --- /dev/null +++ b/include/configs/arndale.h @@ -0,0 +1,255 @@ +/* + * Copyright (C) 2013 Samsung Electronics + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Configuration settings for the SAMSUNG Arndale board. + */ + +#ifndef __CONFIG_ARNDALE_H +#define __CONFIG_ARNDALE_H + +/* High Level Configuration Options */ +#define CONFIG_SAMSUNG /* in a SAMSUNG core */ +#define CONFIG_S5P /* S5P Family */ +#define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */ +#define CONFIG_EXYNOS5250 + +#include <asm/arch/cpu.h> /* get chip and board defs */ + +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Enable fdt support for Exynos5250 */ +#define CONFIG_ARCH_DEVICE_TREE exynos5250 +#define CONFIG_OF_CONTROL +#define CONFIG_OF_SEPARATE + +/* Allow tracing to be enabled */ +#define CONFIG_TRACE +#define CONFIG_CMD_TRACE +#define CONFIG_TRACE_BUFFER_SIZE (16 << 20) +#define CONFIG_TRACE_EARLY_SIZE (8 << 20) +#define CONFIG_TRACE_EARLY +#define CONFIG_TRACE_EARLY_ADDR 0x50000000 + +/* Keep L2 Cache Disabled */ +#define CONFIG_SYS_DCACHE_OFF + +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define CONFIG_SYS_TEXT_BASE 0x43E00000 + +/* input clock of PLL: SMDK5250 has 24MHz input clock */ +#define CONFIG_SYS_CLK_FREQ 24000000 + +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG +#define CONFIG_CMDLINE_EDITING + +/* Power Down Modes */ +#define S5P_CHECK_SLEEP 0x00000BAD +#define S5P_CHECK_DIDLE 0xBAD00000 +#define S5P_CHECK_LPA 0xABAD0000 + +/* Offset for inform registers */ +#define INFORM0_OFFSET 0x800 +#define INFORM1_OFFSET 0x804 + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20)) + +/* select serial console configuration */ +#define CONFIG_BAUDRATE 115200 +#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000 +#define CONFIG_SILENT_CONSOLE + +/* Console configuration */ +#define CONFIG_CONSOLE_MUX +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define EXYNOS_DEVICE_SETTINGS \ + "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + EXYNOS_DEVICE_SETTINGS + +/* SD/MMC configuration */ +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC +#define CONFIG_SDHCI +#define CONFIG_S5P_SDHCI +#define CONFIG_DWMMC +#define CONFIG_EXYNOS_DWMMC +#define CONFIG_SUPPORT_EMMC_BOOT + + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_SKIP_LOWLEVEL_INIT + +/* PWM */ +#define CONFIG_PWM + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +/* Command definition*/ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_ELF +#define CONFIG_CMD_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_NET +#define CONFIG_CMD_HASH + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_ZERO_BOOTDELAY_CHECK + +/* USB */ +#define CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_EXYNOS +#define CONFIG_USB_STORAGE + +/* MMC SPL */ +#define CONFIG_SPL +#define COPY_BL2_FNPTR_ADDR 0x02020030 + +#define CONFIG_SPL_LIBCOMMON_SUPPORT + +/* specific .lds file */ +#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" +#define CONFIG_SPL_TEXT_BASE 0x02023400 +#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024) + +#define CONFIG_BOOTCOMMAND "mmc read 40007000 451 2000; bootm 40007000" + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT "ARNDALE # " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) + +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_RD_LVL + +#define CONFIG_NR_DRAM_BANKS 8 +#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE +#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE) +#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE)) +#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE)) +#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_5 (CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE)) +#define PHYS_SDRAM_5_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_6 (CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE)) +#define PHYS_SDRAM_6_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_7 (CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE)) +#define PHYS_SDRAM_7_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE)) +#define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE + +#define CONFIG_SYS_MONITOR_BASE 0x00000000 + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH +#undef CONFIG_CMD_IMLS +#define CONFIG_IDENT_STRING " for ARNDALE" + +#define CONFIG_SYS_MMC_ENV_DEV 0 + +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SECURE_BL1_ONLY + +/* Secure FW size configuration */ +#ifdef CONFIG_SECURE_BL1_ONLY +#define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */ +#else +#define CONFIG_SEC_FW_SIZE 0 +#endif + +/* Configuration of BL1, BL2, ENV Blocks on mmc */ +#define CONFIG_RES_BLOCK_SIZE (512) +#define CONFIG_BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ +#define CONFIG_BL2_SIZE (512UL << 10UL) /* 512 KB */ +#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */ + +#define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE) +#define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE) +#define CONFIG_ENV_OFFSET (CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE) + +/* U-boot copy size from boot Media to DRAM.*/ +#define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512) +#define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512) + +#define CONFIG_SPI_BOOTING +#define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058 +#define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE) + +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION +#define CONFIG_CMD_PART +#define CONFIG_PARTITION_UUIDS + + +#define CONFIG_IRAM_STACK 0x02050000 + +#define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK + +/* I2C */ +#define CONFIG_SYS_I2C_INIT_BOARD +#define CONFIG_HARD_I2C +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C_SPEED 100000 /* 100 Kbps */ +#define CONFIG_DRIVER_S3C24X0_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_MAX_I2C_NUM 8 +#define CONFIG_SYS_I2C_SLAVE 0x0 +#define CONFIG_I2C_EDID + +/* PMIC */ +#define CONFIG_PMIC +#define CONFIG_PMIC_I2C +#define CONFIG_PMIC_MAX77686 + +#define CONFIG_DEFAULT_DEVICE_TREE exynos5250-arndale + +/* Ethernet Controllor Driver */ +#ifdef CONFIG_CMD_NET +#define CONFIG_SMC911X +#define CONFIG_SMC911X_BASE 0x5000000 +#define CONFIG_SMC911X_16_BIT +#define CONFIG_ENV_SROM_BANK 1 +#endif /*CONFIG_CMD_NET*/ + +/* Enable PXE Support */ +#ifdef CONFIG_CMD_NET +#define CONFIG_CMD_PXE +#define CONFIG_MENU +#endif + +/* Enable devicetree support */ +#define CONFIG_OF_LIBFDT + +/* Enable Time Command */ +#define CONFIG_CMD_TIME + +#endif /* __CONFIG_H */ diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h index 8f8f85f..8c21909 100644 --- a/include/configs/exynos5250-dt.h +++ b/include/configs/exynos5250-dt.h @@ -13,7 +13,7 @@ #define CONFIG_SAMSUNG /* in a SAMSUNG core */ #define CONFIG_S5P /* S5P Family */ #define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */ -#define CONFIG_SMDK5250 /* which is in a SMDK5250 */ +#define CONFIG_EXYNOS5250 #include <asm/arch/cpu.h> /* get chip and board defs */ diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index d0fafd7..c303244 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -29,6 +29,9 @@ /* DRAM Base */ #define CONFIG_SYS_SDRAM_BASE 0x30000000 +/* Text Base */ +#define CONFIG_SYS_TEXT_BASE 0x34800000 + #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_CMDLINE_TAG #define CONFIG_INITRD_TAG diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index a572e62..507a5d3 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -34,6 +34,9 @@ /* DRAM Base */ #define CONFIG_SYS_SDRAM_BASE 0x30000000 +/* Text Base */ +#define CONFIG_SYS_TEXT_BASE 0x34800000 + #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_CMDLINE_TAG #define CONFIG_INITRD_TAG diff --git a/include/power/max77686_pmic.h b/include/power/max77686_pmic.h index 91b7ba7..c98db1b 100644 --- a/include/power/max77686_pmic.h +++ b/include/power/max77686_pmic.h @@ -139,6 +139,32 @@ enum { EN_LDO = (0x3 << 6), }; +enum { + OPMODE_OFF = 0, + OPMODE_STANDBY, + OPMODE_LPM, + OPMODE_ON, +}; + +int max77686_set_ldo_voltage(struct pmic *p, int ldo, ulong uV); +int max77686_set_ldo_mode(struct pmic *p, int ldo, char opmode); +int max77686_set_buck_mode(struct pmic *p, int buck, char opmode); + +#define MAX77686_LDO_VOLT_MAX_HEX 0x3f +#define MAX77686_LDO_VOLT_MASK 0x3f +#define MAX77686_LDO_MODE_MASK 0xc0 +#define MAX77686_LDO_MODE_OFF (0x00 << 0x06) +#define MAX77686_LDO_MODE_STANDBY (0x01 << 0x06) +#define MAX77686_LDO_MODE_LPM (0x02 << 0x06) +#define MAX77686_LDO_MODE_ON (0x03 << 0x06) +#define MAX77686_BUCK_MODE_MASK 0x03 +#define MAX77686_BUCK_MODE_SHIFT_1 0x00 +#define MAX77686_BUCK_MODE_SHIFT_2 0x04 +#define MAX77686_BUCK_MODE_OFF 0x00 +#define MAX77686_BUCK_MODE_STANDBY 0x01 +#define MAX77686_BUCK_MODE_LPM 0x02 +#define MAX77686_BUCK_MODE_ON 0x03 + /* Buck1 1 volt value */ #define MAX77686_BUCK1OUT_1V 0x5 /* Buck1 1.05 volt value */ diff --git a/tools/Makefile b/tools/Makefile index 0a29147..c36cde2 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -52,7 +52,7 @@ BIN_FILES-$(CONFIG_CMD_LOADS) += img2srec$(SFX) BIN_FILES-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes$(SFX) BIN_FILES-y += mkenvimage$(SFX) BIN_FILES-y += mkimage$(SFX) -BIN_FILES-$(CONFIG_SMDK5250) += mksmdk5250spl$(SFX) +BIN_FILES-$(CONFIG_EXYNOS5250) += mk$(BOARD)spl$(SFX) BIN_FILES-$(CONFIG_MX23) += mxsboot$(SFX) BIN_FILES-$(CONFIG_MX28) += mxsboot$(SFX) BIN_FILES-$(CONFIG_NETCONSOLE) += ncb$(SFX) @@ -87,6 +87,7 @@ NOPED_OBJ_FILES-y += ublimage.o OBJ_FILES-$(CONFIG_BUILD_ENVCRC) += envcrc.o OBJ_FILES-$(CONFIG_CMD_LOADS) += img2srec.o OBJ_FILES-$(CONFIG_CMD_NET) += gen_eth_addr.o +OBJ_FILES-$(CONFIG_EXYNOS5250) += mkexynosspl.o OBJ_FILES-$(CONFIG_KIRKWOOD) += kwboot.o OBJ_FILES-$(CONFIG_LCD_LOGO) += bmp_logo.o OBJ_FILES-$(CONFIG_MX23) += mxsboot.o |