diff options
100 files changed, 3359 insertions, 927 deletions
@@ -1,3 +1,1069 @@ +commit bcab74baa6b1b1c969038ab6f64a186239180405 +Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> +Date: Tue Jul 15 11:23:02 2008 -0400 + + Round the serial port clock divisor value returned by calc_divisor() + + Round the serial port clock divisor value returned by + calc_divisor() + + Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> + Acked-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 0328ef0edfe950f0b7b8b368dae482531506b74a +Author: Robin Getz <rgetz@blackfin.uclinux.org> +Date: Tue Jul 15 21:44:46 2008 +0200 + + Fix DHCP protocol so U-Boot does not respond too early + on the network with it's offered IP number; it should not reply until + after it has received a DHCP ACK message. Also ensures that U-Boot + does it's DHCPREQUEST as broadcast (per RFC 2131). + + Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> + Acked-by: Ben Warren <biggerbadderben@gmail.com> + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 7288f972fcaee14a9741cb08c8688a23874b4a2e +Author: Sebastian Siewior <bigeasy@linutronix.de> +Date: Tue Jul 15 13:35:23 2008 +0200 + + cfi_flash: make the command u32 only + + This got changed by commit 93c56f212c + [cfi_flash: support of long cmd in U-boot.] + + Long is the wrong type because it will behave differently on 64bit + machines in a way that is probably not expected. u32 should be + enough. + + Cc: Alexey Korolev <akorolev@infradead.org> + Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru> + Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> + +commit 31cfe57491b183acae575d486729e158f016c27b +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Mon Jul 14 23:48:41 2008 +0200 + + tools/gitignore: update to all generated files + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 5e0de0e216b8fb27634afb11c60a2fa24c23349e +Author: Andre Schwarz <andre.schwarz@matrix-vision.de> +Date: Wed Jul 9 18:30:44 2008 +0200 + + mpc5xxx: Add MVBC_P board support + + The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet + controller (using e1000) and custom Altera Cyclone-II FPGA on PCI. + + Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit e2d31fb3450653115452144363d5bde4e5e3e693 +Author: Timur Tabi <timur@freescale.com> +Date: Thu Jun 19 17:56:11 2008 -0500 + + Update Freescale sys_eeprom.c to handle CCID formats + + Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats. The + NXID format replaces the older CCID format, but it's important to support both + since most boards out there still use the CCID format. This change is in + preparation for using one file to handle both formats. This will also unify + EEPROM support for all Freescale 85xx and 86xx boards. + + Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR + instead of ID_EEPROM_ADDR. + + Signed-off-by: Timur Tabi <timur@freescale.com> + +commit d85f46a25ccb33ed9b295de3c2cfe1ce270ece9a +Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> +Date: Fri Jul 11 17:22:43 2008 +0900 + + pci: sh: Add pci_skip_dev and pci_print_dev function + + Add function of new PCI, pci_skip_dev and pci_print_dev. + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 1107014e835ec9d46c0333f4211d104f77442db0 +Author: Andy Fleming <afleming@freescale.com> +Date: Mon Jul 14 20:29:07 2008 -0500 + + Clean up INIT_RAM options + + The L2_INIT_RAM option was unused, and recent changes to the TLB code + meant that the INIT_RAM TLBs weren't being cleared out. In order to reduce + the amount of mapped space attached to nothing, we change things so the TLBs + get cleared. + + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 4524561820a9327e89107854b3a7187800ccf719 +Author: Andy Fleming <afleming@freescale.com> +Date: Mon Jul 14 20:26:57 2008 -0500 + + Remove fake flash bank from 8544 DS + + The fake flash bank was generating errors for anyone who didn't have a + PromJET hooked up to the board. As that constitutes the vast majority of + users, we remove it. + + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 630d9bfcb5f6d3a43f251901a6b480994dcb6ea3 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Mon Jul 14 14:07:03 2008 -0500 + + MPC8544DS: Add ATI Video card support + + Add support for using a PCIe ATI Video card on PCIe2. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 7f9f4347cf325c63a39fe30910f3fb211ae2cc15 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Mon Jul 14 14:07:02 2008 -0500 + + 85xx: Add some L1/L2 SPR register definitions + + Add new L1/L2 SPRs related to e500mc cache config and control. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit e5852787f0c3c442a276262f13d91ca450605ac0 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Mon Jul 14 14:07:01 2008 -0500 + + MPC8544DS: Report board id, board version and fpga version. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 73f15a060f67a2462551c334215bd20fac6b81d1 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Mon Jul 14 14:07:00 2008 -0500 + + 85xx: Cleanup L2 cache size detection + + The L2 size detection code was a bit confusing and we kept having to add + code to it to handle new processors. Change the sense of detection so we + look for the older processors that aren't changing. + + Also added support for 1M cache size on 8572. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit c3ca7e5e00a24451f20df3bded9a61ba541921df +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Fri Jul 11 15:33:08 2008 -0400 + + sbc8560: enable CONFIG_OF_LIBFDT by default + + Make the default build for the sbc8560 board be powerpc + capable with libfdt support. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + +commit 6b44a44ec2aab180d7095c1c92e669cee1d3e3bd +Author: Andy Fleming <afleming@freescale.com> +Date: Mon Jul 14 20:04:40 2008 -0500 + + Fix indentation for default boot environment variables + + This was proposed by Paul Gortmaker in response to Wolfgang's comments on + similar #defines in sbc8560.h. + + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 37fef499104e28e0a83b02b85ca0d1fbe80d294a +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Fri Jul 11 15:33:07 2008 -0400 + + sbc8560: add default fdt values + + Add in the default fdt settings and the typical EXTRA_ENV + settings as borrowed from the mpc8560ads. Fix a couple + of stale references to the mpc8560ads dating back to the + original clone/fork. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit d04e76edf92f7f89696989e8702b97e020455af3 +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Fri Jul 11 15:33:06 2008 -0400 + + sbc8560: add in ft_board_setup() + + Add in for the sbc8560, the ft_board_setup() routine, based on what is + in use for the Freescale MPC8560ADS board. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + +commit c158bcaca3b31cbe38c4143812e6170e38a57393 +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Fri Jul 11 15:33:05 2008 -0400 + + sbc8560: define eth0 and eth1 instead of eth1 and eth2 + + The existing config doesn't define CONFIG_HAS_ETH0, and so the + fdt support doesn't update the zeros in the dtb local-mac with + real data from the u-boot env. Since the existing config is + tailored to just two interfaces, get rid of the ETH2 definitions + at the same time. + + Also don't include any end user specific data into the environment + by default -- things like MAC address, network parameters etc. need + to come from the end user. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 0ec436d2f95076d9e46ae594db6e9b1d8732840d +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Fri Jul 11 15:33:04 2008 -0400 + + sbc8560: properly set cs0_bnds for 512MB + + The sbc8560 board ships with 512MB of memory installed, + but the current cs0_bnds is hard coded for 256MB. Set the + value based on CFG_SDRAM_SIZE. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + +commit 6de5bf24004c8d9c9b070bb8f7418d1c45e5eb27 +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Fri Jul 11 15:33:03 2008 -0400 + + sbc8560: proper definitions for TSEC. + + The definitions for the TSEC have become out of date. There is no + longer any such options like "CONFIG_MPC85xx_TSEC1" or similar. + Update to match those of other boards, like the MPC8560ADS. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Acked-by: Ben Warren <biggerbadderben@gmail.com> + +commit 71074abbe0c76429577aff58aeff0a24ad210b23 +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Wed Jul 9 13:23:05 2008 -0400 + + 8xxx-fdt: set ns16550 clock from CFG_NS16550_CLK, not bi_busfreq + + Some boards that have external 16550 UARTs don't have a direct + tie between bi_busfreq and the clock used for the UARTs. Boards + that do have such a tie should set CFG_NS16550_CLK to be + get_bus_freq(0) -- which most of them do already. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Acked-by: Kim Phillips <kim.phillips@freescale.com> + +commit 24ef76f320fbadf074105229826514db140f939f +Author: Andrew Klossner <andrew@cesa.opbu.xerox.com> +Date: Wed Jul 2 07:03:53 2008 -0700 + + Change the temp map to ROM to align addresses to page size. + + With a page size of BOOKE_PAGESZ_16M, both the real and effective + addresses must be multiples of 16MB. The hardware silently truncates + them so the code happens to work. This patch clarifies the situation + by establishing addresses that the hardware doesn't need to truncate. + + Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com> + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 06b4186c10204b6683edb047ac5f506fb0ce0937 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Tue Jun 17 17:45:22 2008 -0500 + + mpc85xx: use IS_E_PROCESSOR macro + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 6b70ffb9d1b2e791161f3cf92937aa45b4a07b78 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Mon Jun 16 15:55:53 2008 -0500 + + fdt: add crypto node handling for MPC8{3, 5}xxE processors + + Delete the crypto node if not on an E-processor. If on 8360 or 834x family, + check rev and up-rev crypto node (to SEC rev. 2.4 property values) + if on an 'EA' processor, e.g. MPC8349EA. + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 85e5808e8ea9f77da5219f23394112f0b424fa5e +Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> +Date: Fri Jul 11 15:10:11 2008 -0400 + + ARM DaVinci: Remove extern phy_t declaration by moving code to proper place + + ARM DaVinci: Remove extern phy_t declaration by moving + code to proper place. + + Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> + +commit 3a9e7ba2ac14018c5dd1e78a7dd735571569c971 +Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> +Date: Fri Jul 11 15:10:10 2008 -0400 + + ARM DaVinci: Remove duplicate definitions of MACH_TYPE and prototype of i2c_init() + + ARM DaVinci: Remove duplicate definitions of MACH_TYPE + and prototype of i2c_init(). + + Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> + +commit 348753d416cd2c9e7ec6520a544c8f33cf02a560 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Mon Jul 14 14:03:02 2008 -0500 + + Fix some more printf() format problems. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 45b16d22c64674ccd8c4637456a987463609141c +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Jul 14 22:38:42 2008 +0200 + + Fix coding style; make code better parsable by external tools + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit b880cbf207b1c109d3a661417a8feddcbd729a9d +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Jul 14 21:19:08 2008 +0200 + + cpu/i386/serial.c: Fix syntax errors + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit e2d45e6f4d9919e1afeac5e09557b2252832fccf +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Jul 14 20:41:35 2008 +0200 + + elppc board: Coding style cleanup. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 82b24a8a505fc81466484b3c55b574ee0b4205bc +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Jul 14 20:40:22 2008 +0200 + + elppc board: fix syntax error. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 0fe340585a6a48bd392d315b0dd84d068b1c3790 +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Jul 14 20:38:26 2008 +0200 + + EB+MCF-EV123 board: fix coding style (alingment) + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 6841785a0bb0f38175456a923edd634fb7dd6947 +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Jul 14 20:36:44 2008 +0200 + + EB+MCF-EV123 board: fix syntx error + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit ab5cda9f88c3eaf9cf599adc3a3375906c4ed904 +Author: Andy Fleming <afleming@freescale.com> +Date: Mon Jul 7 18:02:08 2008 -0500 + + Remove LBC_CACHE_BASE from 8544 DS + + The 8544 DS doesn't have any cacheable Local Bus memories set up. By mapping + space for some anyway, we were allowing speculative loads into unmapped space, + which would cause an exception (annoying, even if ultimately harmless). + Removing LBC_CACHE_BASE, and using LBC_NONCACHE_BASE for the LBC LAW solves the + problem. + + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit d0ff51ba5d0309dbe9e25ea54f8a0285a6d5db90 +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Jul 14 15:19:07 2008 +0200 + + Code cleanup: fix old style assignment ambiguities like "=-" etc. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit d7854223c5c85b5849fbf422cc8ac0efef461c37 +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Jul 14 15:10:53 2008 +0200 + + AmigaOneG3SE: remove dead and incomplete files + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit b64f190b7a34224df09b559ca111eb1b733f00ad +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Jul 14 15:06:35 2008 +0200 + + Fix printf() format issues with sizeof_t types by using %zu + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit f354b73e16a86f9e9085471a830605f74f84ea5d +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Mon Jul 14 14:11:45 2008 +0200 + + vsprintf: add z and t options + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 25dbe98abb686d8210e1731fba85ced7d3ce874c +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Jul 13 23:07:35 2008 +0200 + + Fix some more printf() format issues. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit d5996dd555edf52721b7691a4c59de016251ed39 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Jul 13 19:51:00 2008 +0200 + + Fix some more printf() format problems. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 0f9d5f6d6e814907794995c6a22af752040c35d9 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Jul 13 19:48:26 2008 +0200 + + ADS5121: Fix (delete) incorrect ads5121_diu_init() prototype + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 322716a1d1eb33a71067ba0eb1c5346fb2dd6b34 +Author: Anatolij Gustschin <agust@denx.de> +Date: Sat Jul 12 17:31:36 2008 +0200 + + Fix bug in Lime video driver + + We need to wait while drawing engine clears frame + buffer before any further software accesses to frame + buffer will be initiated. Otherwise software drawn + parts could be partially destroyed by the drawing + engine or even GDC chip freeze could occur (as + observed on socrates board). + + Signed-off-by: Anatolij Gustschin <agust@denx.de> + +commit 0a5676befb0c590212a53f7627fa5d0d8a84bf34 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Sat Jul 12 14:36:34 2008 +0200 + + Fix some more printf() format issues. + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 18c8a28aad49803780bd8d52432ded528e37e701 +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Jul 11 15:11:57 2008 +0200 + + hwmon: rename CONFIG_DS1722 to CONFIG_DTT_DS1722 + + Signed-off-by: Michal Simek <monstr@monstr.eu> + Acked-by: Stefan Roese <sr@denx.de> + +commit 6ecbb45bb027e90c19d63b48e7b0c05acc1a87c0 +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Jul 11 11:50:53 2008 +0200 + + hwmon: Cleaning hwmon devices + + Clean Makefile + Move device specific values to driver for better reading + + Signed-off-by: Michal Simek <monstr@monstr.eu> + Acked-by: Stefan Roese <sr@denx.de> + +commit c78fce699c7ff467ecd841da6a79f065180bf578 +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Jul 11 10:43:13 2008 +0200 + + FIS: repare incorrect return value with ramdisk handling + + Microblaze and PowerPC use boot_get_ramdisk for loading + ramdisk to memory with checking return value. + Return 0 means success. Return 1 means failed. + Here is correspond part of code from bootm.c which check + return code. + + ret = boot_get_ramdisk (argc, argv, images, IH_ARCH_PPC, + &rd_data_start, &rd_data_end); + if (ret) + goto error; + + Signed-off-by: Michal Simek <monstr@monstr.eu> + +commit 84a2c64a26dc5e275e1cf4e76a6e194a18fb5477 +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Jul 11 10:10:32 2008 +0200 + + microblaze: Remove useless ancient headers + + Signed-off-by: Michal Simek <monstr@monstr.eu> + +commit 53ea981c3124b13c137c2d10e975b7c6672266e0 +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Jul 11 10:10:31 2008 +0200 + + microblaze: Clean uartlite driver + + Redesign uartlite driver to in_be32 and out_be32 macros + Fix missing header in io.h + + Signed-off-by: Michal Simek <monstr@monstr.eu> + Acked-by: Grant Likely <grant.likely@secretlab.ca> + +commit dbf3dfb386a2d5d2381814e39985ab2e21894550 +Author: Marcel Ziswiler <marcel@ziswiler.com> +Date: Fri Jul 11 02:39:14 2008 +0200 + + Enable passing of ATAGs required by latest Linux kernel. + +commit ef130d3093bdf88f01cf3e000fe5df249ebf2b1a +Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> +Date: Fri Jul 11 10:24:15 2008 -0400 + + Fix integer overflow warning in calc_divisor() + + which happened when rounding the serial port clock divisor + + Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> + +commit 6b760189d77f001684e3160b355c185ca3804961 +Author: Marcel Ziswiler <marcel@ziswiler.com> +Date: Fri Jul 11 01:09:59 2008 +0200 + + Fix build time warnings in function mmc_decode_csd() + + Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> + +commit c15947d6ce0d59925c97fdfac692476af6e262d0 +Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> +Date: Thu Jul 10 10:46:33 2008 -0400 + + ARM: Fix for broken compilation when defining CONFIG_CMD_ELF + + caused by missing dcache status/enable/disable functions. + + Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> + +commit 068c1b77c8f42a1a31084d2f4b1d5cc807c1a9ce +Author: Stefan Roese <sr@denx.de> +Date: Thu Jul 10 13:53:31 2008 +0200 + + ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards + + This patch removes some ft_board_setup() functions from some 4xx boards. + This can be done since we now have a default weak implementation for this + in cpu/ppc4xx/fdt.c. Only board in need for a different/custom + implementation like canyonlands need their own version. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit d39a089f8bc960ba9ae6a08fda5582b578620cc1 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Jul 13 14:58:16 2008 +0200 + + Add last known maintainer for orphaned boards; reformat. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 5c761d57bb9940e016d561fda8b2ed84c55de5b6 +Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> +Date: Thu Jul 10 13:16:04 2008 +0200 + + Remove kharris@nexus-tech.net from MAINTAINERS + + Mail to kharris@nexus-tech.net bounces because the user doesn't exist + anymore. You can't be a maintainer without a valid e-mail address, so + move all boards that used to be maintained by Kyle Harris to the + "orphaned" list. + + Currently, only PowerPC has a list of orphaned boards, so this patch + creates one for ARM as well. + + Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> + +commit 17bd17071463b0cde391ac4a0863d600474b4ea1 +Author: Anatolij Gustschin <agust@denx.de> +Date: Thu Jul 10 01:15:10 2008 +0200 + + at91: Fix to enable using Teridian MII phy (78Q21x3) with at91sam9260 + + On the at91sam9260ep development board there is an EEPROM + connected to the TWI interface (PA23, PA24 Peripheral A + multiplexing), so we cannot use these pins as ETX2, ETX3. + This patch configures PA10, PA11 pins for ETX2, ETX3 + instead of PA23, PA24 pins. + + Signed-off-by: Anatolij Gustschin <agust@denx.de> + Signed-off-by: Manuel Sahm <Manuel.Sahm@feig.de> + +commit f889265753ddf4465d9d580827bb9289bfac55d6 +Author: Kenneth Johansson <kenneth@southpole.se> +Date: Sat Jul 12 13:18:34 2008 -0600 + + fix DIU for small screens + + The DIU_DIV register is 8 bit not 5 bit. This prevented large DIV values + so it was not possible to set a slow pixel clock and thus prevented + display on small screens. + + Signed-off-by: Kenneth Johansson <kenneth@southpole.se> + Acked-by: John Rigby <jrigby@freescale.com> + +commit b60b8573875e650e4c69be667bfc88d3ed474a7c +Author: John Rigby <jrigby@freescale.com> +Date: Fri Jul 11 14:44:09 2008 -0600 + + ADS5121 cleanup compile warnings + + board/ads5121/iopin.c + Replace bit fields in struct iopin_t with a single + field and intialize it via plain old macros. + This fixes the type pun warnings and makes the code + more readable. + + board/ads5121/ads5121.c + Add include iopin.h to ads5121.c for the iopin_initialize + prototype. + + Add an extern void ads5121_diu_init(void) + + Signed-off-by: John Rigby <jrigby@freescale.com> + +commit bde63587622c4b830a27d1ddf7265843de9e994f +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Jul 11 22:56:11 2008 +0200 + + Fix some more printf() format issues. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 184f1b404a90eef8b425c0e7b3018d59ef9982c8 +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Jul 11 22:55:31 2008 +0200 + + Fixed some out-of-tree build issues + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 47bf9c71ae838305a3ea3161af8d14e6f3fc2c82 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Wed Jul 9 16:20:23 2008 -0500 + + ColdFire: Fix FB CS not setup properly for Mcf5282 + + Remove all CFG_CSn_RO in cpu/mcf52x2/cpu_init.c. If + CFG_CSn_RO is defined as 0, the chipselect will not + be assigned. + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit bc3ccb139f0836f0a834cfd370a120a00ad7e63a +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Wed Jul 9 15:47:27 2008 -0500 + + ColdFire: Fix incorrect define for mcf5227x and mcf5445x RTC + + Rename CONFIG_MCFTMR to CONFIG_MCFRTC to include real time + clock module in cpu/<cf arch>/cpu_init.c + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit f94945b517f10e01927101679c62361e03d4e837 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Wed Jul 9 15:25:01 2008 -0500 + + ColdFire: Fix incorrect board name in MAKEALL for M5253EVBE + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit 0e0c4357d14a3563c6a2a1e6d5ad6a2cc4f35cab +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Wed Jul 9 15:21:44 2008 -0500 + + Fix compile error caused by missing timer function + + Add #define CONFIG_MCFTMR in EB+MCF-EV123.h configuration file + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit c37ea031175b807c54e6bad9b270e9bede6c0078 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Wed Jul 9 15:14:25 2008 -0500 + + Fix compile error caused by incorrect function return type + + Rename int mii_init(void) to void mii_init(void) + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit ab4860b255239dbaecccdd002c8d11f4ef54dd75 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Wed Jun 18 19:27:23 2008 -0500 + + ColdFire: Fix power up issue for MCF5235 + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit dd08e97361fbc9e79fa5ef1a8acf29273b934b11 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Wed Jun 18 19:19:07 2008 -0500 + + ColdFire: Fix compiling error for MCF5275 + + The compiling error was caused by missing a closed parentheses + in speed.c + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit 94603c2fd4dbe0655878416aa0da9f302d4c30d3 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Wed Jun 18 19:14:01 2008 -0500 + + ColdFire: Fix timer issue for MCF5272 + + The timer was assigned to wrong timer memory mapped which + caused udelay() and timer() not working properly. + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit 3b1e8ac9b43f89cc9291a6a86e6b33ef55801515 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Wed Jun 18 19:12:13 2008 -0500 + + ColdFire: Change invalid JMP to BRA caught by new v4e toolchain + + Signed-off-by: Kurt Mahan <kmahan@freescale.com> + +commit 8371dc2066136be21e10b7b9293e469297d77298 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Wed Jun 18 19:05:23 2008 -0500 + + ColdFire: Add -got=single param for new linux v4e toolchains + + Signed-off-by: Kurt Mahan <kmahan@freescale.com> + +commit 56d52615cd47bc522ee13bb7ec7e59d6ce9426c7 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Wed Jun 18 13:21:19 2008 -0500 + + ColdFire: Fix code flash configuration for M547x/M548x boards + + Signed-off-by: Kurt Mahan <kmahan@freescale.com> + +commit 6e37091afc07fdcc15590093fd066b0cb7399f85 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Tue Jun 24 12:12:16 2008 -0500 + + ColdFire: Fix warning messages by passing correct data type in board.c + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit 81cc32322acb1b3225ee45606ced48e2a14824dc +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Thu May 29 12:21:54 2008 -0500 + + ColdFire: Fix UART baudrate formula + + The formula "counter = (u32) (gd->bus_clk / gd->baudrate) / 32" + can generate the wrong divisor due to integer division truncation. + Round the calculated divisor value by adding 1/2 the baudrate + before dividing by the baudrate. + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + Acked-by: Gerald Van Baren <vanbaren@cideas.com> + +commit b578fb471444cbd7db1285701ba51343baaf73fb +Author: Stefan Roese <sr@denx.de> +Date: Thu Jul 10 11:38:26 2008 +0200 + + ppc4xx: Fix include sequence in 4xx_pcie.c + + This patch now moves common.h to the top of the inlcude list. This + is needed for boards with CONFIG_PHYS_64BIT set (e.g. katmai), so that + the phys_size_t/phys_addr_t are defined to the correct size in this + driver. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 9b55a2536919f4de1bb1044e6eb8262c2f53bc96 +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Jul 11 01:16:00 2008 +0200 + + Fix some more print() format errors. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit fdd70d1921b87287d9a99d1be99bc35226c2b412 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Thu Jul 10 20:57:54 2008 +0200 + + MAKEALL: remove duplicated at91 from ARM9 list and add LIST_at91 to arm + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit c6457e3b8bc79a97381cf7deffa08f7c5a24f86c +Author: Sergey Lapin <slapin@ossfans.org> +Date: Thu Jun 5 11:06:29 2008 +0400 + + DataFlash AT45DB021 support + + Some boards based on AT91SAM926X-EK use smaller DF chips to keep + bootstrap, u-boot and its environment, using NAND or other external + storage for kernel and rootfs. This patch adds support for + small 1024x263 chip. + + Signed-off-by: Sergey Lapin <slapin@ossfans.org> + +commit 4109df6f75fc00ab7da56d286ba50149a0d16a69 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Thu Jul 10 14:00:15 2008 -0500 + + silence misc printf formatting compiler warnings + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 3d71c81a9bb03f866a1e98da96363ef3f46c76b3 +Author: Markus Klotzbücher <mk@denx.de> +Date: Thu Jul 10 14:47:09 2008 +0200 + + USB: shutdown USB before booting + + This patch fixes a potentially serious issue related to USB which was + discouvered by Martin Krause <martin.krause@tqs.de> and fixed for + ARM920T. Martin wrote: + + Turn off USB to prevent the host controller from writing to the + SDRAM while Linux is booting. This could happen, because the HCCA + (Host Controller Communication Area) lies within the SDRAM and the + host controller writes continously to this area (as busmaster!), for + example to increase the HccaFrameNumber variable, which happens + every 1 ms. + + This is a slightly modified version of the patch in order to shutdown + USB when booting on all architectures. + + Signed-off-by: Markus Klotzbuecher <mk@denx.de> + +commit f31c49db2a5e076f415c0785eb37f67f2faa5fc8 +Author: Martha Marx <mmarx@silicontkx.com> +Date: Thu May 29 14:23:25 2008 -0400 + + Configuration changes for ADS5121 Rev 3 + + ADS5121 Rev 3 board is now the default config + + config targets are now + + ads5121_config + Rev 3 board with + PCI + M41T62 on board RTC + 512MB DRAM + + ads5121_rev2_config + Rev 2 board with + No PCI + 256MB DRAM + + Signed-off-by: Martha Marx <mmarx@silicontkx.com> + Acked-by: Grant Likely <grant.likely@secretlab.ca> + Acked-by: John Rigby <jrigby@freescale.com> + +commit 16bee7b0dc294ee01ca2434aa1dd3bd717a69615 +Author: Martha Marx <mmarx@silicontkx.com> +Date: Thu May 29 15:37:21 2008 -0400 + + Consolidate ADS5121 IO Pin configuration + + Consolidate ADS5121 IO Pin configuration to one file + board/ads5121/iopin.c. + + Remove pin config from cpu/mpc512x/fec.c + + Signed-off-by: Martha Marx <mmarx@silicontkx.com> + Acked-by: Grant Likely <grant.likely@secretlab.ca> + Acked-by: John Rigby <jrigby@freescale.com> + +commit d4692b0ba83b7b454bbd92bad1f4befe6e1657b7 +Author: Christian Eggers <christian@p2400.wgnetz.xx> +Date: Fri Jun 27 19:46:51 2008 +0200 + + Fix "usb part" command + + Only print partition for selected device if user supplied the <dev> + arg with the "usb part [dev]" command. + + Signed-off-by: Christian Eggers <ceggers@gmx.de> + Acked-by: Markus Klotzbuecher <mk@denx.de> + +commit cc83b27217f7380041fea386ddb6d6d9b261617d +Author: Harald Welte <laforge@gnumonks.org> +Date: Mon Jul 7 00:58:05 2008 +0800 + + fix USB devices with multiple configurations + + This patch fixes bugs in usbdcore*.c related to the use of devices + with multiple configurations. + + The original code made mistakes about the meaning of configuration value and + configuration index, and the resulting off-by-one errors resulted in: + + * SET_CONFIGURATION always selected the first configuration, no matter what + wValue is being passed. + * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first + configuration (index 0). + + Signed-off-by: Harald Welte <laforge@openmoko.org> + Acked-by: Markus Klotzbuecher <mk@denx.de> + +commit 06c53beae1a726e707971c555613f09b270a2461 +Author: Wolfgang Denk <wd@denx.de> +Date: Thu Jul 10 13:16:09 2008 +0200 + + Fix some more print() format errors. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit d4b5f3fa001228d76e2c3380cedadf804b802c2a +Author: Christian Eggers <christian@p2400.wgnetz.xx> +Date: Fri Jun 27 19:46:51 2008 +0200 + + Fix "usb part" command + + Only print partition for selected device if user supplied the <dev> + arg with the "usb part [dev]" command. + + Signed-off-by: Christian Eggers <ceggers@gmx.de> + Acked-by: Markus Klotzbuecher <mk@denx.de> + +commit e73b5212e0463a3db0af0a5c95c75bfb762ca973 +Author: Harald Welte <laforge@gnumonks.org> +Date: Mon Jul 7 00:58:05 2008 +0800 + + fix USB devices with multiple configurations + + This patch fixes bugs in usbdcore*.c related to the use of devices + with multiple configurations. + + The original code made mistakes about the meaning of configuration value and + configuration index, and the resulting off-by-one errors resulted in: + + * SET_CONFIGURATION always selected the first configuration, no matter what + wValue is being passed. + * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first + configuration (index 0). + + Signed-off-by: Harald Welte <laforge@openmoko.org> + Acked-by: Markus Klotzbuecher <mk@denx.de> + +commit e870690bdca154943ecadd5212d2d59c1b9d391b +Author: Stefan Roese <sr@denx.de> +Date: Thu Jul 10 10:10:54 2008 +0200 + + MTD/NAND: Fix printf format warning in nand code + + This patch fixes NAND related printf format warning. Those warnings are + now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd + [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is + really helpful. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 10943c9afa25694bd9999461f4e9e50ce22fff2b +Author: Stefan Roese <sr@denx.de> +Date: Thu Jul 10 10:00:45 2008 +0200 + + rtc: Fix printf format warning in m41t60.c + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit dc1da42f814cd71e6756c2cf62af1ada1d0581fb +Author: Stefan Roese <sr@denx.de> +Date: Tue Jul 8 12:01:47 2008 +0200 + + pci: Move PCI device configuration check into a separate weak function + + This patch moves the check, if a device should be skipped in PCI PNP + configuration into the function pci_skip_dev(). This function is defined + as weak so that it can be overwritten by a platform specific one if + needed. The check if the device should get printed in the PCI summary upon + bootup (when CONFIG_PCI_SCAN_SHOW is defined) is moved to the function + pci_print_dev() which is also defined as weak too. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit b002144e1dc21374b1ef5281fe6b5d014af96650 +Author: Stefan Roese <sr@denx.de> +Date: Thu Jul 10 09:58:06 2008 +0200 + + ppc4xx: Fix printf format warnings now visible with the updated format check + + This patch fixes ppc4xx related printf format warning. Those warnings are + now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd + [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is + really helpful. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 5d812b8b4ad9667c77a5bf92b4ba81699abc9fc3 +Author: Stefan Roese <sr@denx.de> +Date: Wed Jul 9 17:33:57 2008 +0200 + + ppc4xx: Enable support for > 2GB SDRAM on AMCC Katmai + + Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM. + To support such configurations, we "only" map the first 2GB via the TLB's. We + need some free virtual address space for the remaining peripherals like, SoC + devices, FLASH etc. + + Note that ECC is currently not supported on configurations with more than 2GB + SDRAM. This is because we only map the first 2GB on such systems, and therefore + the ECC parity byte of the remaining area can't be written. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit cf1c2ed91df26903b956948f37f82de9e1158a89 +Author: Larry Johnson <lrj@acm.org> +Date: Sat Jun 14 17:02:49 2008 -0400 + + ppc4xx: Remove implementation of testdram() from Korat board support + + Signed-off-by: Larry Johnson <lrj@acm.org> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 47ce4a28ccfcfb803aa68d3d4505a8de056a8a5e +Author: Larry Johnson <lrj@acm.org> +Date: Sat Jun 14 16:53:02 2008 -0400 + + ppc4xx: Update and add FDT to Korat board support + + Signed-off-by: Larry Johnson <lrj@acm.org> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 4188f0491886b3b486164e819c0a83fdb97efd7d +Author: Wolfgang Denk <wd@denx.de> +Date: Thu Jul 10 01:13:30 2008 +0200 + + Minor coding style cleanup; update CHANGELOG + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit 8915f1189c1d29d8be7f4de325702d90a8988219 Author: Paul Gortmaker <paul.gortmaker@windriver.com> Date: Wed Jul 9 17:50:45 2008 -0400 @@ -285,6 +1351,19 @@ Date: Tue Jul 8 12:03:24 2008 +0900 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +commit 3473ab737282b08ad61841fcbb14c4d264a93a8e +Author: Jason Jin <Jason.jin@freescale.com> +Date: Tue May 13 11:50:36 2008 +0800 + + Feed the watchdog in u-boot for 8610 board. + + The watchdog on 8610 board is enabled by setting sw[6] + to on. Once enabled, the watchdog can not be disabled + by software. So feed the dog in u-boot is necessary for + normal operation. + + Signed-off-by: Jason Jin <Jason.jin@freescale.com> + commit 63676841ca2d603b13765f3f7b72ff1a61c23f90 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> Date: Wed Jun 18 12:10:33 2008 -0400 @@ -748,6 +1827,18 @@ Date: Sun Jun 8 17:59:53 2008 +0200 Signed-off-by: Juergen Kilb <J.Kilb@gmx.de> Acked-by: Felix Radensky <felix@embedded-sol.com> +commit dd1c5523d6f44e842e69f2fcb50788c6060eab86 +Author: Stefan Roese <sr@denx.de> +Date: Tue Jul 1 17:03:19 2008 +0200 + + ppc4xx: Fix 460EX/GT PCIe port initialization + + This patch fixes a bug where the 460EX/GT PCIe UTLSET1 register was + configured incorrectly. Thanks to Olga Buchonina from AMCC for pointing + this out. + + Signed-off-by: Stefan Roese <sr@denx.de> + commit b571afde0295b007a45055ee49f8822c753a5651 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Date: Sat Jun 7 12:29:52 2008 +0200 @@ -1129,6 +2220,22 @@ Date: Thu Jun 12 12:40:11 2008 +0200 Acked-by: Stefan Roese <sr@denx.de> Acked-by: Kumar Gala <galak@kernel.crashing.org> +commit a036b0443657fe0f4773786de9092251869f08ac +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Jun 19 01:45:50 2008 -0500 + + MPC8610HPCD: Report board id, board version and fpga version. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 7de8c21f14df9c20fdcf6027aec8e8545f75f835 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Jun 19 01:45:27 2008 -0500 + + MPC8641HPCN: Report board id, board version and fpga version. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + commit fb8c061ea05fc68d37e2a8b9f8c949d76c8d71a8 Author: Stefan Roese <sr@denx.de> Date: Mon Jun 16 10:40:02 2008 +0200 @@ -426,7 +426,7 @@ D: FADS823 configuration, MPC823 video support, I2C, wireless keyboard, lots mor N: Andre Schwarz E: andre.schwarz@matrix-vision.de -D: Support for Matrix Vision boards (MVBLM7) +D: Support for Matrix Vision boards (MVBLM7/MVBC_P) N: Robert Schwebel E: r.schwebel@pengutronix.de diff --git a/MAINTAINERS b/MAINTAINERS index b667c8e..b170111 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -372,6 +372,7 @@ Peter De Schrijver <p2@mind.be> Andre Schwarz <andre.schwarz@matrix-vision.de> + mvbc_p MPC5200 mvblm7 MPC8343 Timur Tabi <timur@freescale.com> @@ -48,6 +48,7 @@ LIST_5xxx=" \ mecp5200 \ motionpro \ munices \ + MVBC_P \ o2dnt \ pf5200 \ PM520 \ @@ -23,8 +23,8 @@ VERSION = 1 PATCHLEVEL = 3 -SUBLEVEL = 3 -EXTRAVERSION = +SUBLEVEL = 4 +EXTRAVERSION = -rc1 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) VERSION_FILE = $(obj)include/version_autogenerated.h @@ -493,6 +493,9 @@ aev_config: unconfig BC3450_config: unconfig @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450 +cm5200_config: unconfig + @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200 + cpci5200_config: unconfig @$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd @@ -540,9 +543,6 @@ icecube_5100_config: unconfig jupiter_config: unconfig @$(MKCONFIG) jupiter ppc mpc5xxx jupiter -v38b_config: unconfig - @$(MKCONFIG) -a v38b ppc mpc5xxx v38b - inka4x0_config: unconfig @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0 @@ -617,9 +617,20 @@ prs200_highboot_DDR_config: unconfig mecp5200_config: unconfig @$(MKCONFIG) mecp5200 ppc mpc5xxx mecp5200 esd +motionpro_config: unconfig + @$(MKCONFIG) motionpro ppc mpc5xxx motionpro + munices_config: unconfig @$(MKCONFIG) munices ppc mpc5xxx munices +MVBC_P_config: unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)board/mvbc_p + @ >$(obj)include/config.h + @[ -z "$(findstring MVBC_P,$@)" ] || \ + { echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; } + @$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision + o2dnt_config: unconfig @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt @@ -644,9 +655,6 @@ PM520_ROMBOOT_DDR_config: unconfig smmaco4_config: unconfig @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc -cm5200_config: unconfig - @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200 - spieval_config: unconfig @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc @@ -740,15 +748,17 @@ TQM5200_STK100_config: unconfig { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \ } @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc + uc101_config: unconfig @$(MKCONFIG) uc101 ppc mpc5xxx uc101 -motionpro_config: unconfig - @$(MKCONFIG) motionpro ppc mpc5xxx motionpro +v38b_config: unconfig + @$(MKCONFIG) -a v38b ppc mpc5xxx v38b ######################################################################### ## MPC512x Systems ######################################################################### + ads5121_config \ ads5121_rev2_config \ : unconfig @@ -1219,6 +1229,9 @@ CATcenter_33_config: unconfig } @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave +CMS700_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd + CPCI2DP_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd @@ -1403,6 +1416,9 @@ redwood_config: unconfig sbc405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405 +sc3_config:unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3 + sequoia_config \ rainier_config: unconfig @mkdir -p $(obj)include @@ -1421,9 +1437,6 @@ rainier_nand_config: unconfig @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk -sc3_config:unconfig - @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3 - taihu_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc @@ -1436,9 +1449,6 @@ VOH405_config: unconfig VOM405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd -CMS700_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd - W7OLMC_config \ W7OLMG_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o @@ -1863,9 +1873,6 @@ M5275EVB_config : unconfig M5282EVB_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb -TASREG_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd - M5329AFEE_config \ M5329BFEE_config : unconfig @case "$@" in \ @@ -1985,6 +1992,9 @@ M5485HFE_config : unconfig fi @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale +TASREG_config : unconfig + @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd + ######################################################################### ## MPC83xx Systems ######################################################################### @@ -2308,12 +2318,12 @@ PCIPPC2_config \ PCIPPC6_config: unconfig @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2 -ZUMA_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 - ppmc7xx_config: unconfig @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx +ZUMA_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 + #======================================================================== # ARM #======================================================================== @@ -2365,12 +2375,12 @@ csb637_config : unconfig kb9202_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200 -mp2usb_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200 - m501sk_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200 +mp2usb_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200 + ######################################################################### ## Atmel ARM926EJ-S Systems ######################################################################### @@ -2407,6 +2417,18 @@ cp922_XA10_config \ cp1026_config: unconfig @board/integratorcp/split_by_variant.sh $@ +davinci_dvevm_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs dv-evm davinci davinci + +davinci_schmoogie_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci + +davinci_sffsdr_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci + +davinci_sonata_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci + lpd7a400_config \ lpd7a404_config: unconfig @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x @@ -2423,21 +2445,6 @@ netstar_config: unconfig omap1510inn_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn -omap5912osk_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap - -davinci_dvevm_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs dv-evm davinci davinci - -davinci_schmoogie_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci - -davinci_sffsdr_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci - -davinci_sonata_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci - xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1)))) omap1610inn_config \ @@ -2461,6 +2468,9 @@ omap1610h2_cs_autoboot_config: unconfig fi; @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap +omap5912osk_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap + xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1))) omap730p2_config \ @@ -2522,9 +2532,16 @@ trab_old_config: unconfig VCMA9_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0 -#======================================================================== +######################################################################### # ARM supplied Versatile development boards -#======================================================================== +######################################################################### + +cm4008_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695 + +cm41xx_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695 + versatile_config \ versatileab_config \ versatilepb_config : unconfig @@ -2533,12 +2550,6 @@ versatilepb_config : unconfig voiceblue_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue -cm4008_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695 - -cm41xx_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695 - ######################################################################### ## S3C44B0 Systems ######################################################################### @@ -2653,8 +2664,6 @@ zylonite_config : ######################################################################### ## ARM1136 Systems ######################################################################### -omap2420h4_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx apollon_config : unconfig @mkdir -p $(obj)include @@ -2671,6 +2680,9 @@ imx31_phycore_config : unconfig mx31ads_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads NULL mx31 +omap2420h4_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx + #======================================================================== # i386 #======================================================================== @@ -2720,6 +2732,7 @@ tb0229_config: unconfig ######################################################################### ## MIPS32 AU1X00 ######################################################################### + dbau1000_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h @@ -2745,17 +2758,17 @@ dbau1550_el_config : unconfig @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 +gth2_config : unconfig + @mkdir -p $(obj)include + @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h + @$(MKCONFIG) -a gth2 mips mips gth2 + pb1000_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_PB1000 1" >$(obj)include/config.h @$(MKCONFIG) -a pb1x00 mips mips pb1x00 -gth2_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h - @$(MKCONFIG) -a gth2 mips mips gth2 - -qemu_mips_config: unconfig +qemu_mips_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h @$(MKCONFIG) -a qemu-mips mips mips qemu-mips @@ -2774,6 +2787,24 @@ purple_config : unconfig ## Nios32 ######################################################################### +ADNPESC1_DNPEVA2_base_32_config \ +ADNPESC1_base_32_config \ +ADNPESC1_config: unconfig + @mkdir -p $(obj)include + @[ -z "$(findstring _DNPEVA2,$@)" ] || \ + { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \ + $(XECHO) "... DNP/EVA2 configuration" ; \ + } + @[ -z "$(findstring _base_32,$@)" ] || \ + { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ + $(XECHO) "... NIOS 'base_32' configuration" ; \ + } + @[ -z "$(findstring ADNPESC1_config,$@)" ] || \ + { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ + $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \ + } + @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv + DK1C20_safe_32_config \ DK1C20_standard_32_config \ DK1C20_config: unconfig @@ -2815,24 +2846,6 @@ DK1S10_config: unconfig } @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera -ADNPESC1_DNPEVA2_base_32_config \ -ADNPESC1_base_32_config \ -ADNPESC1_config: unconfig - @mkdir -p $(obj)include - @[ -z "$(findstring _DNPEVA2,$@)" ] || \ - { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \ - $(XECHO) "... DNP/EVA2 configuration" ; \ - } - @[ -z "$(findstring _base_32,$@)" ] || \ - { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ - $(XECHO) "... NIOS 'base_32' configuration" ; \ - } - @[ -z "$(findstring ADNPESC1_config,$@)" ] || \ - { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ - $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \ - } - @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv - ######################################################################### ## Nios-II ######################################################################### @@ -2853,21 +2866,19 @@ PCI5441_config : unconfig @$(MKCONFIG) PCI5441 nios2 nios2 pci5441 psyent #======================================================================== -# MicroBlaze -#======================================================================== -######################################################################### ## Microblaze -######################################################################### -suzaku_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno +#======================================================================== ml401_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_ML401 1" > $(obj)include/config.h @$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx +suzaku_config: unconfig + @mkdir -p $(obj)include + @echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h + @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno + xupv2p_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_XUPV2P 1" > $(obj)include/config.h @@ -2890,9 +2901,9 @@ $(BFIN_BOARDS): #======================================================================== # AVR32 #======================================================================== -######################################################################### -## AT32AP70xx -######################################################################### + +atngw100_config : unconfig + @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x atstk1002_config : unconfig @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x @@ -2906,16 +2917,14 @@ atstk1004_config : unconfig atstk1006_config : unconfig @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x -atngw100_config : unconfig - @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x - -######################################################################### -######################################################################### -######################################################################### +#======================================================================== +# SH3 (SuperH) +#======================================================================== ######################################################################### ## sh3 (Renesas SuperH) ######################################################################### + mpr2_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h @@ -2929,6 +2938,12 @@ ms7720se_config: unconfig ######################################################################### ## sh4 (Renesas SuperH) ######################################################################### + +MigoR_config : unconfig + @mkdir -p $(obj)include + @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h + @./mkconfig -a $(@:_config=) sh sh4 MigoR + ms7750se_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h @@ -2939,21 +2954,16 @@ ms7722se_config : unconfig @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se -MigoR_config : unconfig +r2dplus_config : unconfig @mkdir -p $(obj)include - @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h - @./mkconfig -a $(@:_config=) sh sh4 MigoR + @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h + @./mkconfig -a $(@:_config=) sh sh4 r2dplus r7780mp_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h @./mkconfig -a $(@:_config=) sh sh4 r7780mp -r2dplus_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h - @./mkconfig -a $(@:_config=) sh sh4 r2dplus - sh7763rdp_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h @@ -2962,6 +2972,7 @@ sh7763rdp_config : unconfig #======================================================================== # SPARC #======================================================================== + ######################################################################### ## LEON3 ######################################################################### diff --git a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c index fad9c40..39c97b1 100644 --- a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c +++ b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c @@ -41,51 +41,51 @@ int checkboard (void) phys_size_t initdram (int board_type) { - int size,i; + int size, i; size = 0; - MCFSDRAMC_DCR = MCFSDRAMC_DCR_RTIM_6 - | MCFSDRAMC_DCR_RC((15 * CFG_CLK)>>4); - #ifdef CFG_SDRAM_BASE0 - - MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE0) - | MCFSDRAMC_DACR_CASL(1) - | MCFSDRAMC_DACR_CBM(3) - | MCFSDRAMC_DACR_PS_16); - - MCFSDRAMC_DMR0 = MCFSDRAMC_DMR_BAM_16M - | MCFSDRAMC_DMR_V; - - MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP; - - *(unsigned short *)(CFG_SDRAM_BASE0) = 0xA5A5; - MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_RE; - for (i=0; i < 2000; i++) - asm(" nop"); - mbar_writeLong(MCFSDRAMC_DACR0, mbar_readLong(MCFSDRAMC_DACR0) - | MCFSDRAMC_DACR_IMRS); - *(unsigned int *)(CFG_SDRAM_BASE0 + 0x220) = 0xA5A5; - size += CFG_SDRAM_SIZE * 1024 * 1024; - #endif - #ifdef CFG_SDRAM_BASE1 - MCFSDRAMC_DACR1 = MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE1) - | MCFSDRAMC_DACR_CASL(1) - | MCFSDRAMC_DACR_CBM(3) - | MCFSDRAMC_DACR_PS_16; - - MCFSDRAMC_DMR1 = MCFSDRAMC_DMR_BAM_16M - | MCFSDRAMC_DMR_V; - - MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IP; - - *(unsigned short *)(CFG_SDRAM_BASE1) = 0xA5A5; - MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_RE; - for (i=0; i < 2000; i++) - asm(" nop"); - MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IMRS; - *(unsigned int *)(CFG_SDRAM_BASE1 + 0x220) = 0xA5A5; - size += CFG_SDRAM_SIZE1 * 1024 * 1024; - #endif + MCFSDRAMC_DCR = MCFSDRAMC_DCR_RTIM_6 + | MCFSDRAMC_DCR_RC ((15 * CFG_CLK) >> 4); +#ifdef CFG_SDRAM_BASE0 + + MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE (CFG_SDRAM_BASE0) + | MCFSDRAMC_DACR_CASL (1) + | MCFSDRAMC_DACR_CBM (3) + | MCFSDRAMC_DACR_PS_16; + + MCFSDRAMC_DMR0 = MCFSDRAMC_DMR_BAM_16M | MCFSDRAMC_DMR_V; + + MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP; + + *(unsigned short *) (CFG_SDRAM_BASE0) = 0xA5A5; + MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_RE; + for (i = 0; i < 2000; i++) + asm (" nop"); + mbar_writeLong (MCFSDRAMC_DACR0, + mbar_readLong (MCFSDRAMC_DACR0) | MCFSDRAMC_DACR_IMRS); + *(unsigned int *) (CFG_SDRAM_BASE0 + 0x220) = 0xA5A5; + size += CFG_SDRAM_SIZE * 1024 * 1024; +#endif +#ifdef CFG_SDRAM_BASE1 + MCFSDRAMC_DACR1 = MCFSDRAMC_DACR_BASE (CFG_SDRAM_BASE1) + | MCFSDRAMC_DACR_CASL (1) + | MCFSDRAMC_DACR_CBM (3) + | MCFSDRAMC_DACR_PS_16; + + MCFSDRAMC_DMR1 = MCFSDRAMC_DMR_BAM_16M | MCFSDRAMC_DMR_V; + + MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IP; + + *(unsigned short *) (CFG_SDRAM_BASE1) = 0xA5A5; + MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_RE; + + for (i = 0; i < 2000; i++) + asm (" nop"); + + MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IMRS; + *(unsigned int *) (CFG_SDRAM_BASE1 + 0x220) = 0xA5A5; + size += CFG_SDRAM_SIZE1 * 1024 * 1024; +#endif return size; } diff --git a/board/BuS/EB+MCF-EV123/cfm_flash.c b/board/BuS/EB+MCF-EV123/cfm_flash.c index b326384..98e563f 100644 --- a/board/BuS/EB+MCF-EV123/cfm_flash.c +++ b/board/BuS/EB+MCF-EV123/cfm_flash.c @@ -173,7 +173,7 @@ int cfm_flash_write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cn dest = cmf_backdoor_address(addr); while ((cnt>=4) && (rc == ERR_OK)) { - data =*((volatile u32 *) src); + data = *((volatile u32 *) src); *(volatile u32*) dest = data; MCFCFM_CMD = MCFCFM_CMD_PGM; MCFCFM_USTAT = MCFCFM_USTAT_CBEIF; diff --git a/board/BuS/EB+MCF-EV123/flash.c b/board/BuS/EB+MCF-EV123/flash.c index 5e2647d..c2a1b6f 100644 --- a/board/BuS/EB+MCF-EV123/flash.c +++ b/board/BuS/EB+MCF-EV123/flash.c @@ -348,7 +348,7 @@ int amd_flash_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt dest = addr; while ((cnt>=2) && (rc == ERR_OK)) { - data =*((volatile u16 *) src); + data = *((volatile u16 *) src); rc=amd_write_word (info,dest,data); src +=2; dest +=2; diff --git a/board/MAI/AmigaOneG3SE/ps2kbd.c b/board/MAI/AmigaOneG3SE/ps2kbd.c index 39d8149..724a44d 100644 --- a/board/MAI/AmigaOneG3SE/ps2kbd.c +++ b/board/MAI/AmigaOneG3SE/ps2kbd.c @@ -229,7 +229,7 @@ int drv_isa_kbd_init (void) device_t kbddev ; char *stdinname = getenv ("stdin"); - if(isa_kbd_init()==-1) + if(isa_kbd_init() == -1) return -1; memset (&kbddev, 0, sizeof(kbddev)); strcpy(kbddev.name, DEVNAME); @@ -515,7 +515,7 @@ int kbd_read_data(void) int val; unsigned char status; - val=-1; + val = -1; status = kbd_read_status(); if (status & KBD_STAT_OBF) { val = kbd_read_input(); diff --git a/board/MAI/AmigaOneG3SE/usb_uhci.c b/board/MAI/AmigaOneG3SE/usb_uhci.c index 479beed..26cdcdf 100644 --- a/board/MAI/AmigaOneG3SE/usb_uhci.c +++ b/board/MAI/AmigaOneG3SE/usb_uhci.c @@ -518,7 +518,7 @@ void usb_check_int_chain(void) uhci_td_t *td,*prevtd; for(i=0;i<8;i++) { - prevtd=&td_int[i]; /* the first previous td is the skeleton td */ + prevtd = &td_int[i]; /* the first previous td is the skeleton td */ link=swap_32(td_int[i].link) & 0xfffffff0; /* next in chain */ td=(uhci_td_t *)link; /* assign it */ /* all interrupt TDs are finally linked to the td_int[0]. @@ -595,7 +595,7 @@ int usb_lowlevel_init(void) busdevfunc=pci_find_device(USB_UHCI_VEND_ID,USB_UHCI_DEV_ID,0); /* get PCI Device ID */ - if(busdevfunc==-1) { + if(busdevfunc == -1) { printf("Error USB UHCI (%04X,%04X) not found\n",USB_UHCI_VEND_ID,USB_UHCI_DEV_ID); return -1; } @@ -642,12 +642,12 @@ int usb_lowlevel_init(void) */ int usb_lowlevel_stop(void) { - if(irqvec==-1) + if(irqvec == -1) return 1; irq_free_handler(irqvec); irq_free_handler(0); reset_hc(); - irqvec=-1; + irqvec = -1; return 0; } diff --git a/board/MAI/menu/menu.c b/board/MAI/menu/menu.c deleted file mode 100644 index c0c63a8..0000000 --- a/board/MAI/menu/menu.c +++ /dev/null @@ -1,66 +0,0 @@ -#include "menu.h" - -#define SINGLE_BOX 0 -#define DOUBLE_BOX 1 - -void video_draw_box(int style, int attr, char *title, int separate, int x, int y, int w, int h); -void video_draw_text(int x, int y, int attr, char *text); -void video_save_rect(int x, int y, int w, int h, void *save_area, int clearchar, int clearattr); -void video_restore_rect(int x, int y, int w, int h, void *save_area); -int video_rows(void); -int video_cols(void); - -#define MAX_MENU_OPTIONS 200 - -typedef struct -{ - int used; /* flag if this entry is used */ - int entry_x; /* Character column of the menu entry */ - int entry_y; /* Character line of the entry */ - int option_x; /* Character colum of the option (entry is same) */ -} option_data_t; - -option_data_t odata[MAX_MENU_OPTIONS]; - -int normal_attr = 0x0F; -int select_attr = 0x2F; -int disabled_attr = 0x07; - -menu_t *root_menu; - -int menu_init (menu_t *root) -{ - char *s; - int i; - - s = getenv("menu_normal"); - if (s) normal_attr = atoi(s); - - s = getenv("menu_select"); - if (s) select_attr = atoi(s); - - s = getenv("menu_disabled"); - if (s) disabled_attr = atoi(s); - - for (i=0; i<MAX_MENU_OPTIONS; i++) odata[i].used = 0; - - root_menu = root; -} - -option_data_t *menu_alloc_odata(void) -{ - int i; - for (int i=0; i<MAX_MENU_OPTIONS; i++) - { - if (odata[i].used == 0) return &odata[i]; - } - return NULL; -} - -void menu_free_odata(option_data_t *odata) -{ - odata->used = 0; -} - -void menu_layout (menu_t *menu) -{ diff --git a/board/MAI/menu/menu.h b/board/MAI/menu/menu.h deleted file mode 100644 index 23d89a7..0000000 --- a/board/MAI/menu/menu.h +++ /dev/null @@ -1,162 +0,0 @@ -#ifndef MENU_H -#define MENU_H - -/* A single menu */ -typedef void (*menu_finish_callback)(struct menu_s *menu); - -typedef struct menu_s { - char *name; /* Menu name */ - int num_options; /* Number of options in this menu */ - int flags; /* Various flags - see below */ - int option_align; /* Aligns options to a field width of this much characters if != 0 */ - - struct menu_option_s **options; /* Pointer to this menu's options */ - menu_finish_callback callback; /* Called when the menu closes */ -} menu_t; - -/* - * type: Type of the option (see below) - * name: Name to display for this option - * help: Optional help string - * id : optional id number - * sys : pointer for system-specific data, init to NULL and don't touch - */ - -#define OPTION_PREAMBLE \ - int type; \ - char *name; \ - char *help; \ - int id; \ - void *sys; - -/* - * Menu option types. - * There are a number of different layouts for menu options depending - * on their types. Currently there are the following possibilities: - * - * Submenu: - * This entry links to a new menu. - * - * Boolean: - * A simple on/off toggle entry. Booleans can be either yes/no, 0/1 or on/off. - * Optionally, this entry can enable/disable a set of other options. An example would - * be to enable/disable on-board USB, and if enabled give access to further options like - * irq settings, base address etc. - * - * Text: - * A single line/limited number of characters text entry box. Text can be restricted - * to a certain charset (digits/hex digits/all/custom). Result is also available as an - * int if numeric. - * - * Selection: - * One-of-many type of selection entry. User may choose on of a set of strings, which - * maps to a specific value for the variable. - * - * Routine: - * Selecting this calls an entry-specific routine. This can be used for saving contents etc. - * - * Custom: - * Display and behaviour of this entry is defined by a set of callbacks. - */ - -#define MENU_SUBMENU_TYPE 0 -typedef struct menu_submenu_s -{ - OPTION_PREAMBLE - - menu_t * submenu; /* Pointer to the submenu */ -} menu_submenu_t; - -#define MENU_BOOLEAN_TYPE 1 -typedef struct menu_boolean_s -{ - OPTION_PREAMBLE - - char *variable; /* Name of the variable to getenv()/setenv() */ - int subtype; /* Subtype (on/off, 0/1, yes/no, enable/disable), see below */ - int mutex; /* Bit mask of options to enable/disable. Bit 0 is the option - immediately following this one, bit 1 is the next one etc. - bit 7 = 0 means to disable when this option is off, - bit 7 = 1 means to disable when this option is on. - An option is disabled when the type field's upper bit is set */ -} menu_boolean_t; - -/* BOOLEAN Menu flags */ -#define MENU_BOOLEAN_ONOFF 0x01 -#define MENU_BOOLEAN_01 0x02 -#define MENU_BOOLEAN_YESNO 0x03 -#define MENU_BOOLEAN_ENDIS 0x04 -#define MENU_BOOLEAN_TYPE_MASK 0x07 - - -#define MENU_TEXT_TYPE 2 -typedef struct menu_text_s -{ - OPTION_PREAMBLE - - char *variable; /* Name of the variable to getenv()/setenv() */ - int maxchars; /* Max number of characters */ - char *charset; /* Optional charset to use */ - int flags; /* Flags - see below */ -} menu_text_t; - -/* TEXT entry menu flags */ -#define MENU_TEXT_NUMERIC 0x01 -#define MENU_TEXT_HEXADECIMAL 0x02 -#define MENU_TEXT_FREE 0x03 -#define MENU_TEXT_TYPE_MASK 0x07 - - -#define MENU_SELECTION_TYPE 3 -typedef struct menu_select_option_s { - char *map_from; /* Map this variable contents ... */ - char *map_to; /* ... to this menu text and vice versa */ -} menu_select_option_t; - -typedef struct menu_select_s { - OPTION_PREAMBLE int num_options; /* Number of mappings */ - menu_select_option_t **options; - /* Option list array */ -} menu_select_t; - - -#define MENU_ROUTINE_TYPE 4 -typedef void (*menu_routine_callback) (struct menu_routine_s *); - -typedef struct menu_routine_s { - OPTION_PREAMBLE menu_routine_callback callback; - /* routine to be called */ - void *user_data; /* User data, don't care for system */ -} menu_routine_t; - - -#define MENU_CUSTOM_TYPE 5 -typedef void (*menu_custom_draw) (struct menu_custom_s *); -typedef void (*menu_custom_key) (struct menu_custom_s *, int); - -typedef struct menu_custom_s { - OPTION_PREAMBLE menu_custom_draw drawfunc; - menu_custom_key keyfunc; - void *user_data; -} menu_custom_t; - -/* - * The menu option superstructure - */ -typedef struct menu_option_s { - union { - menu_submenu_t m_sub_menu; - menu_boolean_t m_boolean; - menu_text_t m_text; - menu_select_t m_select; - menu_routine_t m_routine; - }; -} menu_option_t; - -/* Init the menu system. Returns <0 on error */ -int menu_init(menu_t *root); - -/* Execute a single menu. Returns <0 on error */ -int menu_do(menu_t *menu); - -#endif diff --git a/board/ads5121/README b/board/ads5121/README index f2d1df3..defcd6b 100644 --- a/board/ads5121/README +++ b/board/ads5121/README @@ -5,5 +5,3 @@ ability and set the correct frequency and memory configuration. To configure for the older Rev 2 ADS5121 type (this will not have PCI) make ads5121_rev2_config - - diff --git a/board/davinci/dv-evm/dv_board.c b/board/davinci/dv-evm/dv_board.c index 88b1e57..834eb68 100644 --- a/board/davinci/dv-evm/dv_board.c +++ b/board/davinci/dv-evm/dv_board.c @@ -29,14 +29,10 @@ #include <asm/arch/hardware.h> #include <asm/arch/emac_defs.h> -#define MACH_TYPE_DAVINCI_EVM 901 - DECLARE_GLOBAL_DATA_PTR; -extern void i2c_init(int speed, int slaveaddr); extern void timer_init(void); extern int eth_hw_init(void); -extern phy_t phy; /* Works on Always On power domain only (no PD argument) */ @@ -187,11 +183,8 @@ int misc_init_r (void) } } - if (!eth_hw_init()) { + if (!eth_hw_init()) printf("ethernet init failed!\n"); - } else { - printf("ETH PHY : %s\n", phy.name); - } i2c_read (0x39, 0x00, 1, (u_int8_t *)&i, 1); diff --git a/board/davinci/schmoogie/dv_board.c b/board/davinci/schmoogie/dv_board.c index 13d2195..3017546 100644 --- a/board/davinci/schmoogie/dv_board.c +++ b/board/davinci/schmoogie/dv_board.c @@ -29,14 +29,10 @@ #include <asm/arch/hardware.h> #include <asm/arch/emac_defs.h> -#define MACH_TYPE_SCHMOOGIE 1255 - DECLARE_GLOBAL_DATA_PTR; -extern void i2c_init(int speed, int slaveaddr); extern void timer_init(void); extern int eth_hw_init(void); -extern phy_t phy; /* Works on Always On power domain only (no PD argument) */ @@ -233,11 +229,8 @@ int misc_init_r (void) forceenv("serial#", (char *)&tmp[0]); } - if (!eth_hw_init()) { + if (!eth_hw_init()) printf("ethernet init failed!\n"); - } else { - printf("ETH PHY : %s\n", phy.name); - } return(0); } diff --git a/board/davinci/sffsdr/sffsdr.c b/board/davinci/sffsdr/sffsdr.c index b73484a..f41081f 100644 --- a/board/davinci/sffsdr/sffsdr.c +++ b/board/davinci/sffsdr/sffsdr.c @@ -43,7 +43,6 @@ DECLARE_GLOBAL_DATA_PTR; extern void timer_init(void); extern int eth_hw_init(void); -extern phy_t phy; /* Works on Always On power domain only (no PD argument) */ @@ -288,11 +287,8 @@ int misc_init_r(void) } } - if (!eth_hw_init()) { + if (!eth_hw_init()) printf("Ethernet init failed\n"); - } else { - printf("ETH PHY: %s\n", phy.name); - } /* On this platform, U-Boot is copied in RAM by the UBL, * so we are always in the relocated state. */ diff --git a/board/davinci/sonata/dv_board.c b/board/davinci/sonata/dv_board.c index e8665e5..a6f9bc7 100644 --- a/board/davinci/sonata/dv_board.c +++ b/board/davinci/sonata/dv_board.c @@ -29,14 +29,10 @@ #include <asm/arch/hardware.h> #include <asm/arch/emac_defs.h> -#define MACH_TYPE_SONATA 1254 - DECLARE_GLOBAL_DATA_PTR; -extern void i2c_init(int speed, int slaveaddr); extern void timer_init(void); extern int eth_hw_init(void); -extern phy_t phy; /* Works on Always On power domain only (no PD argument) */ @@ -188,11 +184,8 @@ int misc_init_r (void) } } - if (!eth_hw_init()) { + if (!eth_hw_init()) printf("ethernet init failed!\n"); - } else { - printf("ETH PHY : %s\n", phy.name); - } return(0); } diff --git a/board/eltec/elppc/eepro100_srom.c b/board/eltec/elppc/eepro100_srom.c index f021c50..4a9da54 100644 --- a/board/eltec/elppc/eepro100_srom.c +++ b/board/eltec/elppc/eepro100_srom.c @@ -31,82 +31,83 @@ #include <net.h> #include "srom.h" -extern int eepro100_write_eeprom (struct eth_device* dev, - int location, int addr_len, unsigned short data); +extern int eepro100_write_eeprom (struct eth_device *dev, + int location, int addr_len, + unsigned short data); /*----------------------------------------------------------------------------*/ unsigned short eepro100_srom_checksum (unsigned short *sromdata) { - unsigned short sum = 0; - unsigned int i; - - for (i = 0; i < (EE_SIZE-1); i++) - { - sum += sromdata[i]; - } - return (EE_CHECKSUM - sum); + unsigned short sum = 0; + unsigned int i; + + for (i = 0; i < (EE_SIZE - 1); i++) { + sum += sromdata[i]; + } + return (EE_CHECKSUM - sum); } /*----------------------------------------------------------------------------*/ int eepro100_srom_store (unsigned short *source) { - int count; - struct eth_device onboard_dev; - - /* get onboard network iobase */ - pci_read_config_dword(PCI_BDF(0,0x10,0), PCI_BASE_ADDRESS_0, - (unsigned int *)&onboard_dev.iobase); - onboard_dev.iobase &= ~0xf; - - source[63] = eepro100_srom_checksum (source); - - for (count=0; count < EE_SIZE; count++) - { - if ( eepro100_write_eeprom ((struct eth_device*)&onboard_dev, - count, EE_ADDR_BITS, SROM_SHORT(source)) == -1 ) - return -1; - source++; - } - return 0; + int count; + struct eth_device onboard_dev; + + /* get onboard network iobase */ + pci_read_config_dword (PCI_BDF (0, 0x10, 0), PCI_BASE_ADDRESS_0, + (unsigned int *) &onboard_dev.iobase); + onboard_dev.iobase &= ~0xf; + + source[63] = eepro100_srom_checksum (source); + + for (count = 0; count < EE_SIZE; count++) { + if (eepro100_write_eeprom ((struct eth_device *) &onboard_dev, + count, EE_ADDR_BITS, + SROM_SHORT (source)) == -1) { + return -1; + } + source++; + } + return 0; } /*----------------------------------------------------------------------------*/ #ifdef EEPRO100_SROM_CHECK -extern int read_eeprom (struct eth_device* dev, int location, int addr_len); +extern int read_eeprom (struct eth_device *dev, int location, int addr_len); void eepro100_srom_load (unsigned short *destination) { - int count; - struct eth_device onboard_dev; + int count; + struct eth_device onboard_dev; + #ifdef DEBUG - int lr = 0; - printf ("eepro100_srom_download:\n"); + int lr = 0; + + printf ("eepro100_srom_download:\n"); #endif - /* get onboard network iobase */ - pci_read_config_dword(PCI_BDF(0,0x10,0), PCI_BASE_ADDRESS_0, - &onboard_dev.iobase); - onboard_dev.iobase &= ~0xf; + /* get onboard network iobase */ + pci_read_config_dword (PCI_BDF (0, 0x10, 0), PCI_BASE_ADDRESS_0, + &onboard_dev.iobase); + onboard_dev.iobase &= ~0xf; - memset (destination, 0x65, 128); + memset (destination, 0x65, 128); - for (count=0; count < 0x40; count++) - { - *destination++ = read_eeprom (struct eth_device*)&onboard_dev, - count, EE_ADDR_BITS); + for (count = 0; count < 0x40; count++) { + *destination++ = read_eeprom ((struct eth_device *) &onboard_dev, + count, EE_ADDR_BITS); #ifdef DEBUG - printf ("%04x ", *(destination - 1)); - if (lr++ == 7) - { - printf("\n"); - lr = 0; - } + printf ("%04x ", *(destination - 1)); + if (lr++ == 7) { + printf ("\n"); + lr = 0; + } #endif - } + } } #endif /* EEPRO100_SROM_CHECK */ diff --git a/board/esd/cpci750/sdram_init.c b/board/esd/cpci750/sdram_init.c index a479f0f..0291937 100644 --- a/board/esd/cpci750/sdram_init.c +++ b/board/esd/cpci750/sdram_init.c @@ -1570,8 +1570,8 @@ dram_size(long int *base, long int maxsize) for (cnt = STARTVAL/sizeof(long); cnt < maxsize/sizeof(long); cnt <<= 1) { addr = base + cnt; /* pointer arith! */ - save1=*addr; /* save contents of addr */ - save2=*b; /* save contents of base */ + save1 = *addr; /* save contents of addr */ + save2 = *b; /* save contents of base */ *addr=cnt; /* write cnt to addr */ *b=0; /* put null at base */ diff --git a/board/evb64260/eth.c b/board/evb64260/eth.c index 618af6f..fa5b6d4 100644 --- a/board/evb64260/eth.c +++ b/board/evb64260/eth.c @@ -163,7 +163,7 @@ gt6426x_eth_receive(struct eth_dev_s *p,unsigned int icr) int eth_len=0; char *eth_data; - eth0_rx_desc_single *rx=&p->eth_rx_desc[(p->rdn)]; + eth0_rx_desc_single *rx = &p->eth_rx_desc[(p->rdn)]; INVALIDATE_DCACHE((unsigned int)rx,(unsigned int)(rx+1)); @@ -252,7 +252,7 @@ gt6426x_eth_transmit(void *v, volatile char *p, unsigned int s) #ifdef DEBUG unsigned int old_command_stat,old_psr; #endif - eth0_tx_desc_single *tx=&dev->eth_tx_desc[dev->tdn]; + eth0_tx_desc_single *tx = &dev->eth_tx_desc[dev->tdn]; /* wait for tx to be ready */ INVALIDATE_DCACHE((unsigned int)tx,(unsigned int)(tx+1)); diff --git a/board/evb64260/mpsc.c b/board/evb64260/mpsc.c index 9e8bfe0..3b338c7 100644 --- a/board/evb64260/mpsc.c +++ b/board/evb64260/mpsc.c @@ -259,7 +259,7 @@ char mpsc_getchar (void) int mpsc_test_char(void) { - volatile unsigned int *p=&rx_desc_base[rx_desc_index*8]; + volatile unsigned int *p = &rx_desc_base[rx_desc_index*8]; INVALIDATE_DCACHE(&p[1], &p[2]); diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c index 8b13d06..e53ead0 100644 --- a/board/freescale/common/sys_eeprom.c +++ b/board/freescale/common/sys_eeprom.c @@ -1,7 +1,8 @@ /* - * Copyright 2006 Freescale Semiconductor + * Copyright 2006, 2008 Freescale Semiconductor * York Sun (yorksun@freescale.com) * Haiying Wang (haiying.wang@freescale.com) + * Timur Tabi (timur@freescale.com) * * See file CREDITS for list of people who contributed to this * project. @@ -27,258 +28,441 @@ #include <i2c.h> #include <linux/ctype.h> -typedef struct { - u8 id[4]; /* 0x0000 - 0x0003 EEPROM Tag */ - u8 sn[12]; /* 0x0004 - 0x000F Serial Number */ - u8 errata[5]; /* 0x0010 - 0x0014 Errata Level */ - u8 date[6]; /* 0x0015 - 0x001a Build Date */ - u8 res_0; /* 0x001b Reserved */ - u8 version[4]; /* 0x001c - 0x001f Version */ - u8 tempcal[8]; /* 0x0020 - 0x0027 Temperature Calibration Factors*/ - u8 tempcalsys[2]; /* 0x0028 - 0x0029 System Temperature Calibration Factors*/ - u8 res_1[22]; /* 0x0020 - 0x003f Reserved */ - u8 mac_size; /* 0x0040 Mac table size */ - u8 mac_flag; /* 0x0041 Mac table flags */ - u8 mac[8][6]; /* 0x0042 - 0x0071 Mac addresses */ - u32 crc; /* 0x0072 crc32 checksum */ -} EEPROM_data; - -static EEPROM_data mac_data; - -int mac_show(void) +#include "../common/eeprom.h" + +#if !defined(CFG_I2C_EEPROM_CCID) && !defined(CFG_I2C_EEPROM_NXID) +#error "Please define either CFG_I2C_EEPROM_CCID or CFG_I2C_EEPROM_NXID" +#endif + +/** + * static eeprom: EEPROM layout for CCID or NXID formats + * + * See application note AN3638 for details. + */ +static struct __attribute__ ((__packed__)) eeprom { +#ifdef CFG_I2C_EEPROM_CCID + u8 id[4]; /* 0x00 - 0x03 EEPROM Tag 'CCID' */ + u8 major; /* 0x04 Board revision, major */ + u8 minor; /* 0x05 Board revision, minor */ + u8 sn[10]; /* 0x06 - 0x0F Serial Number*/ + u8 errata[2]; /* 0x10 - 0x11 Errata Level */ + u8 date[6]; /* 0x12 - 0x17 Build Date */ + u8 res_0[40]; /* 0x18 - 0x3f Reserved */ + u8 mac_count; /* 0x40 Number of MAC addresses */ + u8 mac_flag; /* 0x41 MAC table flags */ + u8 mac[8][6]; /* 0x42 - 0x71 MAC addresses */ + u32 crc; /* 0x72 CRC32 checksum */ +#endif +#ifdef CFG_I2C_EEPROM_NXID + u8 id[4]; /* 0x00 - 0x03 EEPROM Tag 'NXID' */ + u8 sn[12]; /* 0x04 - 0x0F Serial Number */ + u8 errata[5]; /* 0x10 - 0x14 Errata Level */ + u8 date[6]; /* 0x15 - 0x1a Build Date */ + u8 res_0; /* 0x1b Reserved */ + u32 version; /* 0x1c - 0x1f NXID Version */ + u8 tempcal[8]; /* 0x20 - 0x27 Temperature Calibration Factors */ + u8 tempcalsys[2]; /* 0x28 - 0x29 System Temperature Calibration Factors */ + u8 tempcalflags; /* 0x2a Temperature Calibration Flags */ + u8 res_1[21]; /* 0x2b - 0x3f Reserved */ + u8 mac_count; /* 0x40 Number of MAC addresses */ + u8 mac_flag; /* 0x41 MAC table flags */ + u8 mac[8][6]; /* 0x42 - 0x71 MAC addresses */ + u32 crc; /* 0x72 CRC32 checksum */ +#endif +} e; + +/* Set to 1 if we've read EEPROM into memory */ +static int has_been_read = 0; + +#ifdef CFG_I2C_EEPROM_NXID +/* Is this a valid NXID EEPROM? */ +#define is_valid (*((u32 *)e.id) == (('N' << 24) | ('X' << 16) | ('I' << 8) | 'D')) +#endif + +#ifdef CFG_I2C_EEPROM_CCID +/* Is this a valid CCID EEPROM? */ +#define is_valid (*((u32 *)e.id) == (('C' << 24) | ('C' << 16) | ('I' << 8) | 'D')) +#endif + +/** + * show_eeprom - display the contents of the EEPROM + */ +static void show_eeprom(void) { int i; - u8 mac_size; - unsigned char ethaddr[8][18]; - unsigned char enetvar[32]; - - /* Show EEPROM tagID, - * always the four characters 'NXID'. - */ - printf("ID "); - for (i = 0; i < 4; i++) - printf("%c", mac_data.id[i]); - printf("\n"); - - /* Show Serial number, - * 0 to 11 charaters of errata information. - */ - printf("SN "); - for (i = 0; i < 12; i++) - printf("%c", mac_data.sn[i]); - printf("\n"); - - /* Show Errata Level, - * 0 to 4 characters of errata information. - */ - printf("Errata "); - for (i = 0; i < 5; i++) - printf("%c", mac_data.errata[i]); - printf("\n"); - - /* Show Build Date, - * BCD date values, as YYMMDDhhmmss. - */ - printf("Date 20%02x/%02x/%02x %02x:%02x:%02x\n", - mac_data.date[0], - mac_data.date[1], - mac_data.date[2], - mac_data.date[3], - mac_data.date[4], - mac_data.date[5]); - - /* Show MAC table size, - * Value from 0 to 7 indicating how many MAC - * addresses are stored in the system EEPROM. - */ - if((mac_data.mac_size > 0) && (mac_data.mac_size <= 8)) - mac_size = mac_data.mac_size; - else - mac_size = 8; /* Set the max size */ - printf("MACSIZE %x\n", mac_size); - - /* Show Mac addresses */ - for (i = 0; i < mac_size; i++) { - sprintf((char *)ethaddr[i], - "%02x:%02x:%02x:%02x:%02x:%02x", - mac_data.mac[i][0], - mac_data.mac[i][1], - mac_data.mac[i][2], - mac_data.mac[i][3], - mac_data.mac[i][4], - mac_data.mac[i][5]); - printf("MAC %d %s\n", i, ethaddr[i]); - - sprintf((char *)enetvar, - i ? "eth%daddr" : "ethaddr", i); - setenv((char *)enetvar, (char *)ethaddr[i]); + unsigned int crc; + + /* EEPROM tag ID, either CCID or NXID */ +#ifdef CFG_I2C_EEPROM_NXID + printf("ID: %c%c%c%c v%u\n", e.id[0], e.id[1], e.id[2], e.id[3], + be32_to_cpu(e.version)); +#else + printf("ID: %c%c%c%c\n", e.id[0], e.id[1], e.id[2], e.id[3]); +#endif + + /* Serial number */ + printf("SN: %s\n", e.sn); + + /* Errata level. */ +#ifdef CFG_I2C_EEPROM_NXID + printf("Errata: %s\n", e.errata); +#else + printf("Errata: %c%c\n", + e.errata[0] ? e.errata[0] : '.', + e.errata[1] ? e.errata[1] : '.'); +#endif + + /* Build date, BCD date values, as YYMMDDhhmmss */ + printf("Build date: 20%02x/%02x/%02x %02x:%02x:%02x %s\n", + e.date[0], e.date[1], e.date[2], + e.date[3] & 0x7F, e.date[4], e.date[5], + e.date[3] & 0x80 ? "PM" : ""); + + /* Show MAC addresses */ + for (i = 0; i < min(e.mac_count, 8); i++) { + u8 *p = e.mac[i]; + printf("Eth%u: %02x:%02x:%02x:%02x:%02x:%02x\n", i, + p[0], p[1], p[2], p[3], p[4], p[5]); } - return 0; + crc = crc32(0, (void *)&e, sizeof(e) - 4); + + if (crc == be32_to_cpu(e.crc)) + printf("CRC: %08x\n", be32_to_cpu(e.crc)); + else + printf("CRC: %08x (should be %08x)\n", + be32_to_cpu(e.crc), crc); + +#ifdef DEBUG + printf("EEPROM dump: (0x%x bytes)\n", sizeof(e)); + for (i = 0; i < sizeof(e); i++) { + if ((i % 16) == 0) + printf("%02X: ", i); + printf("%02X ", ((u8 *)&e)[i]); + if (((i % 16) == 15) || (i == sizeof(e) - 1)) + printf("\n"); + } +#endif } -int mac_read(void) +/** + * read_eeprom - read the EEPROM into memory + */ +static int read_eeprom(void) { - int ret, length; - unsigned int crc = 0; - unsigned char dev = ID_EEPROM_ADDR, *data; + int ret; +#ifdef CFG_EEPROM_BUS_NUM + unsigned int bus; +#endif - length = sizeof(EEPROM_data); - ret = i2c_read(dev, 0, 1, (unsigned char *)(&mac_data), length); - if (ret) { - printf("Read failed.\n"); - return -1; - } + if (has_been_read) + return 0; - data = (unsigned char *)(&mac_data); - printf("Check CRC on reading ..."); - crc = crc32(crc, data, length - 4); - if (crc != mac_data.crc) { - printf("CRC checksum is invalid, in EEPROM CRC is %x, calculated CRC is %x\n", - mac_data.crc, crc); - return -1; - } else { - printf("CRC OK\n"); - mac_show(); - } - return 0; +#ifdef CFG_EEPROM_BUS_NUM + bus = i2c_get_bus_num(); + i2c_set_bus_num(CFG_EEPROM_BUS_NUM); +#endif + + ret = i2c_read(CFG_I2C_EEPROM_ADDR, 0, CFG_I2C_EEPROM_ADDR_LEN, + (void *)&e, sizeof(e)); + +#ifdef CFG_EEPROM_BUS_NUM + i2c_set_bus_num(bus); +#endif + +#ifdef DEBUG + show_eeprom(); +#endif + + has_been_read = (ret == 0) ? 1 : 0; + + return ret; } -int mac_prog(void) +/** + * prog_eeprom - write the EEPROM from memory + */ +static int prog_eeprom(void) { int ret, i, length; - unsigned int crc = 0; - unsigned char dev = ID_EEPROM_ADDR, *ptr; - unsigned char *eeprom_data = (unsigned char *)(&mac_data); - - mac_data.res_0 = 0; - memset((void *)mac_data.res_1, 0, sizeof(mac_data.res_1)); - - length = sizeof(EEPROM_data); - crc = crc32(crc, eeprom_data, length - 4); - mac_data.crc = crc; - for (i = 0, ptr = eeprom_data; i < length; i += 8, ptr += 8) { - ret = i2c_write(dev, i, 1, ptr, min((length - i),8)); - udelay(5000); /* 5ms write cycle timing */ + unsigned int crc; + void *p; +#ifdef CFG_EEPROM_BUS_NUM + unsigned int bus; +#endif + + /* Set the reserved values to 0xFF */ +#ifdef CFG_I2C_EEPROM_NXID + e.res_0 = 0xFF; + memset(e.res_1, 0xFF, sizeof(e.res_1)); +#else + memset(e.res_0, 0xFF, sizeof(e.res_0)); +#endif + + length = sizeof(e); + crc = crc32(0, (void *)&e, length - 4); + e.crc = cpu_to_be32(crc); + +#ifdef CFG_EEPROM_BUS_NUM + bus = i2c_get_bus_num(); + i2c_set_bus_num(CFG_EEPROM_BUS_NUM); +#endif + + for (i = 0, p = &e; i < length; i += 8, p += 8) { + ret = i2c_write(CFG_I2C_EEPROM_ADDR, i, CFG_I2C_EEPROM_ADDR_LEN, + p, min((length - i), 8)); if (ret) break; + udelay(5000); /* 5ms write cycle timing */ } + +#ifdef CFG_EEPROM_BUS_NUM + i2c_set_bus_num(bus); +#endif + if (ret) { printf("Programming failed.\n"); return -1; - } else { - printf("Programming %d bytes. Reading back ...\n", length); - mac_read(); } + + printf("Programming passed.\n"); return 0; } -int do_mac(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +/** + * h2i - converts hex character into a number + * + * This function takes a hexadecimal character (e.g. '7' or 'C') and returns + * the integer equivalent. + */ +static inline u8 h2i(char p) +{ + if ((p >= '0') && (p <= '9')) + return p - '0'; + + if ((p >= 'A') && (p <= 'F')) + return (p - 'A') + 10; + + if ((p >= 'a') && (p <= 'f')) + return (p - 'a') + 10; + + return 0; +} + +/** + * set_date - stores the build date into the EEPROM + * + * This function takes a pointer to a string in the format "YYMMDDhhmmss" + * (2-digit year, 2-digit month, etc), converts it to a 6-byte BCD string, + * and stores it in the build date field of the EEPROM local copy. + */ +static void set_date(const char *string) +{ + unsigned int i; + + if (strlen(string) != 12) { + printf("Usage: mac date YYMMDDhhmmss\n"); + return; + } + + for (i = 0; i < 6; i++) + e.date[i] = h2i(string[2 * i]) << 4 | h2i(string[2 * i + 1]); +} + +/** + * set_mac_address - stores a MAC address into the EEPROM + * + * This function takes a pointer to MAC address string + * (i.e."XX:XX:XX:XX:XX:XX", where "XX" is a two-digit hex number) and + * stores it in one of the MAC address fields of the EEPROM local copy. + */ +static void set_mac_address(unsigned int index, const char *string) +{ + char *p = (char *) string; + unsigned int i; + + if (!string) { + printf("Usage: mac <n> XX:XX:XX:XX:XX:XX\n"); + return; + } + + for (i = 0; *p && (i < 6); i++) { + e.mac[index][i] = simple_strtoul(p, &p, 16); + if (*p == ':') + p++; + } +} + +int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { int i; - char cmd = 's'; - unsigned long long mac_val; + char cmd; - if (i2c_probe(ID_EEPROM_ADDR) != 0) - return -1; + if (argc == 1) { + show_eeprom(); + return 0; + } + + cmd = argv[1][0]; - if (argc > 1) { - cmd = argv[1][0]; + if (cmd == 'r') { + read_eeprom(); + return 0; + } + + if ((cmd == 'i') && (argc > 2)) { + for (i = 0; i < 4; i++) + e.id[i] = argv[2][i]; + return 0; + } + + if (!is_valid) { + printf("Please read the EEPROM ('r') and/or set the ID ('i') first.\n"); + return 0; + } + + if (argc == 2) { switch (cmd) { - case 'r': /* display */ - mac_read(); - break; case 's': /* save */ - mac_prog(); - break; - case 'i': /* id */ - for (i = 0; i < 4; i++) { - mac_data.id[i] = argv[2][i]; - } + prog_eeprom(); break; - case 'n': /* serial number */ - for (i = 0; i < 12; i++) { - mac_data.sn[i] = argv[2][i]; - } - break; - case 'e': /* errata */ - for (i = 0; i < 5; i++) { - mac_data.errata[i] = argv[2][i]; - } - break; - case 'd': /* date */ - mac_val = simple_strtoull(argv[2], NULL, 16); - for (i = 0; i < 6; i++) { - mac_data.date[i] = (mac_val >> (40 - 8 * i)); - } - break; - case 'p': /* mac table size */ - mac_data.mac_size = - (unsigned char)simple_strtoul(argv[2], NULL, 16); - break; - case '0': /* mac 0 */ - case '1': /* mac 1 */ - case '2': /* mac 2 */ - case '3': /* mac 3 */ - case '4': /* mac 4 */ - case '5': /* mac 5 */ - case '6': /* mac 6 */ - case '7': /* mac 7 */ - mac_val = simple_strtoull(argv[2], NULL, 16); - for (i = 0; i < 6; i++) { - mac_data.mac[cmd - '0'][i] = - *((unsigned char *) - (((unsigned int)(&mac_val)) + i + 2)); - } - break; - case 'h': /* help */ default: printf("Usage:\n%s\n", cmdtp->usage); break; } - } else { - mac_show(); + + return 0; } + + /* We know we have at least one parameter */ + + switch (cmd) { + case 'n': /* serial number */ + memset(e.sn, 0, sizeof(e.sn)); + strncpy((char *)e.sn, argv[2], sizeof(e.sn) - 1); + break; + case 'e': /* errata */ +#ifdef CFG_I2C_EEPROM_NXID + memset(e.errata, 0, 5); + strncpy((char *)e.errata, argv[2], 4); +#else + e.errata[0] = argv[2][0]; + e.errata[1] = argv[2][1]; +#endif + break; + case 'd': /* date BCD format YYMMDDhhmmss */ + set_date(argv[2]); + break; + case 'p': /* MAC table size */ + e.mac_count = simple_strtoul(argv[2], NULL, 16); + break; + case '0' ... '7': /* "mac 0" through "mac 7" */ + set_mac_address(cmd - '0', argv[2]); + break; + case 'h': /* help */ + default: + printf("Usage:\n%s\n", cmdtp->usage); + break; + } + return 0; } +/** + * mac_read_from_eeprom - read the MAC addresses from EEPROM + * + * This function reads the MAC addresses from EEPROM and sets the + * appropriate environment variables for each one read. + * + * The environment variables are only set if they haven't been set already. + * This ensures that any user-saved variables are never overwritten. + * + * This function must be called after relocation. + */ int mac_read_from_eeprom(void) { - int length, i; - unsigned char dev = ID_EEPROM_ADDR; - unsigned char *data; - unsigned char ethaddr[4][18]; - unsigned char enetvar[32]; - unsigned int crc = 0; - - length = sizeof(EEPROM_data); - if (i2c_read(dev, 0, 1, (unsigned char *)(&mac_data), length)) { + unsigned int i; + + if (read_eeprom()) { printf("Read failed.\n"); return -1; } - data = (unsigned char *)(&mac_data); - crc = crc32(crc, data, length - 4); - if (crc != mac_data.crc) { + if (!is_valid) { + printf("Invalid ID (%02x %02x %02x %02x)\n", e.id[0], e.id[1], e.id[2], e.id[3]); return -1; - } else { - for (i = 0; i < 4; i++) { - if (memcmp(&mac_data.mac[i], "\0\0\0\0\0\0", 6)) { - sprintf((char *)ethaddr[i], - "%02x:%02x:%02x:%02x:%02x:%02x", - mac_data.mac[i][0], - mac_data.mac[i][1], - mac_data.mac[i][2], - mac_data.mac[i][3], - mac_data.mac[i][4], - mac_data.mac[i][5]); - sprintf((char *)enetvar, - i ? "eth%daddr" : "ethaddr", - i); - setenv((char *)enetvar, (char *)ethaddr[i]); - } + } + + if (be32_to_cpu(e.crc) != 0xFFFFFFFF) { + u32 crc = crc32(0, (void *)&e, sizeof(e) - 4); + + if (crc != be32_to_cpu(e.crc)) { + printf("CRC mismatch (%08x != %08x).\n", crc, + be32_to_cpu(e.crc)); + return -1; + } + } + + for (i = 0; i < min(4, e.mac_count); i++) { + if (memcmp(&e.mac[i], "\0\0\0\0\0\0", 6) && + memcmp(&e.mac[i], "\xFF\xFF\xFF\xFF\xFF\xFF", 6)) { + char ethaddr[18]; + char enetvar[9]; + + sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X", + e.mac[i][0], + e.mac[i][1], + e.mac[i][2], + e.mac[i][3], + e.mac[i][4], + e.mac[i][5]); + sprintf(enetvar, i ? "eth%daddr" : "ethaddr", i); + /* Only initialize environment variables that are blank + * (i.e. have not yet been set) + */ + if (!getenv(enetvar)) + setenv(enetvar, ethaddr); } } + return 0; } + +#ifdef CFG_I2C_EEPROM_CCID + +/** + * get_cpu_board_revision - get the CPU board revision on 85xx boards + * + * Read the EEPROM to determine the board revision. + * + * This function is called before relocation, so we need to read a private + * copy of the EEPROM into a local variable on the stack. + * + * Also, we assume that CFG_EEPROM_BUS_NUM == CFG_SPD_BUS_NUM. The global + * variable i2c_bus_num must be compile-time initialized to CFG_SPD_BUS_NUM, + * so that the SPD code will work. This means that all pre-relocation I2C + * operations can only occur on the CFG_SPD_BUS_NUM bus. So if + * CFG_EEPROM_BUS_NUM != CFG_SPD_BUS_NUM, then we can't read the EEPROM when + * this function is called. Oh well. + */ +unsigned int get_cpu_board_revision(void) +{ + struct board_eeprom { + u32 id; /* 0x00 - 0x03 EEPROM Tag 'CCID' */ + u8 major; /* 0x04 Board revision, major */ + u8 minor; /* 0x05 Board revision, minor */ + } be; + + i2c_read(CFG_I2C_EEPROM_ADDR, 0, CFG_I2C_EEPROM_ADDR_LEN, + (void *)&be, sizeof(be)); + + if (be.id != (('C' << 24) | ('C' << 16) | ('I' << 8) | 'D')) + return MPC85XX_CPU_BOARD_REV(0, 0); + + if ((be.major == 0xff) && (be.minor == 0xff)) + return MPC85XX_CPU_BOARD_REV(0, 0); + + return MPC85XX_CPU_BOARD_REV(e.major, e.minor); +} +#endif diff --git a/board/freescale/mpc8544ds/law.c b/board/freescale/mpc8544ds/law.c index a82dede..54cf36b 100644 --- a/board/freescale/mpc8544ds/law.c +++ b/board/freescale/mpc8544ds/law.c @@ -30,7 +30,7 @@ struct law_entry law_table[] = { SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI), - SET_LAW(CFG_LBC_CACHE_BASE, LAWAR_SIZE_256M, LAW_TRGT_IF_LBC), + SET_LAW(CFG_LBC_NONCACHE_BASE, LAWAR_SIZE_128M, LAW_TRGT_IF_LBC), SET_LAW(CFG_PCIE1_MEM_PHYS, LAWAR_SIZE_256M, LAW_TRGT_IF_PCIE_1), SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1), SET_LAW(CFG_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2), diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 8c4b040..c39ce11 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -49,7 +49,10 @@ int checkboard (void) if ((uint)&gur->porpllsr != 0xe00e0000) { printf("immap size error %lx\n",(ulong)&gur->porpllsr); } - printf ("Board: MPC8544DS\n"); + printf ("Board: MPC8544DS, System ID: 0x%02x, " + "System Version: 0x%02x, FPGA Version: 0x%02x\n", + in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER), + in8(PIXIS_BASE + PIXIS_PVER)); lbc->ltesr = 0xffffffff; /* Clear LBC error interrupts */ lbc->lteir = 0xffffffff; /* Enable LBC error interrupts */ diff --git a/board/freescale/mpc8544ds/tlb.c b/board/freescale/mpc8544ds/tlb.c index 61fc609..40e0499 100644 --- a/board/freescale/mpc8544ds/tlb.c +++ b/board/freescale/mpc8544ds/tlb.c @@ -79,21 +79,13 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 4, BOOKE_PAGESZ_64M, 1), -#ifdef CFG_LBC_CACHE_BASE /* - * TLB 5: 64M Cacheable, non-guarded - */ - SET_TLB_ENTRY(1, CFG_LBC_CACHE_BASE, CFG_LBC_CACHE_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 5, BOOKE_PAGESZ_64M, 1), -#endif - /* - * TLB 6: 64M Non-cacheable, guarded + * TLB 5: 64M Non-cacheable, guarded * 0xf8000000 64M PIXIS 0xF8000000 - 0xFBFFFFFF */ SET_TLB_ENTRY(1, CFG_LBC_NONCACHE_BASE, CFG_LBC_NONCACHE_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 6, BOOKE_PAGESZ_64M, 1), + 0, 5, BOOKE_PAGESZ_64M, 1), }; int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/mpc8544ds/u-boot.lds b/board/freescale/mpc8544ds/u-boot.lds index 785a006..c66c69f 100644 --- a/board/freescale/mpc8544ds/u-boot.lds +++ b/board/freescale/mpc8544ds/u-boot.lds @@ -71,6 +71,7 @@ SECTIONS lib_generic/crc32.o (.text) lib_ppc/extable.o (.text) lib_generic/zlib.o (.text) + drivers/bios_emulator/atibios.o (.text) *(.text) *(.fixup) *(.got1) diff --git a/board/matrix_vision/mvbc_p/Makefile b/board/matrix_vision/mvbc_p/Makefile new file mode 100644 index 0000000..ea72f77 --- /dev/null +++ b/board/matrix_vision/mvbc_p/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2004-2008 +# Matrix-Vision GmbH, info@matrix-vision.de +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o fpga.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend diff --git a/board/matrix_vision/mvbc_p/config.mk b/board/matrix_vision/mvbc_p/config.mk new file mode 100644 index 0000000..c2c09f4 --- /dev/null +++ b/board/matrix_vision/mvbc_p/config.mk @@ -0,0 +1,30 @@ +# +# (C) Copyright 2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +ifndef TEXT_BASE +TEXT_BASE = 0xFF800000 +endif + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board diff --git a/board/matrix_vision/mvbc_p/fpga.c b/board/matrix_vision/mvbc_p/fpga.c new file mode 100644 index 0000000..356af1a --- /dev/null +++ b/board/matrix_vision/mvbc_p/fpga.c @@ -0,0 +1,177 @@ +/* + * (C) Copyright 2002 + * Rich Ireland, Enterasys Networks, rireland@enterasys.com. + * Keith Outwater, keith_outwater@mvis.com. + * + * (C) Copyright 2008 + * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <ACEX1K.h> +#include <command.h> +#include "fpga.h" +#include "mvbc_p.h" + +#ifdef FPGA_DEBUG +#define fpga_debug(fmt, args...) printf("%s: "fmt, __func__, ##args) +#else +#define fpga_debug(fmt, args...) +#endif + +Altera_CYC2_Passive_Serial_fns altera_fns = { + fpga_null_fn, + fpga_config_fn, + fpga_status_fn, + fpga_done_fn, + fpga_wr_fn, + fpga_null_fn, + fpga_null_fn, + 0 +}; + +Altera_desc cyclone2 = { + Altera_CYC2, + passive_serial, + Altera_EP2C8_SIZE, + (void *) &altera_fns, + NULL, + 0 +}; + +DECLARE_GLOBAL_DATA_PTR; + +int mvbc_p_init_fpga(void) +{ + fpga_debug("Initialize FPGA interface (reloc 0x%.8lx)\n", + gd->reloc_off); + fpga_init(gd->reloc_off); + fpga_add(fpga_altera, &cyclone2); + fpga_config_fn(0, 1, 0); + udelay(60); + + return 1; +} + +int fpga_null_fn(int cookie) +{ + return 0; +} + +int fpga_config_fn(int assert, int flush, int cookie) +{ + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO; + u32 dvo = gpio->simple_dvo; + + fpga_debug("SET config : %s\n", assert ? "low" : "high"); + if (assert) + dvo |= FPGA_CONFIG; + else + dvo &= ~FPGA_CONFIG; + + if (flush) + gpio->simple_dvo = dvo; + + return assert; +} + +int fpga_done_fn(int cookie) +{ + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO; + int result = 0; + + udelay(10); + fpga_debug("CONF_DONE check ... "); + if (gpio->simple_ival & FPGA_CONF_DONE) { + fpga_debug("high\n"); + result = 1; + } else + fpga_debug("low\n"); + + return result; +} + +int fpga_status_fn(int cookie) +{ + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO; + int result = 0; + + fpga_debug("STATUS check ... "); + if (gpio->sint_ival & FPGA_STATUS) { + fpga_debug("high\n"); + result = 1; + } else + fpga_debug("low\n"); + + return result; +} + +int fpga_clk_fn(int assert_clk, int flush, int cookie) +{ + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO; + u32 dvo = gpio->simple_dvo; + + fpga_debug("CLOCK %s\n", assert_clk ? "high" : "low"); + if (assert_clk) + dvo |= FPGA_CCLK; + else + dvo &= ~FPGA_CCLK; + + if (flush) + gpio->simple_dvo = dvo; + + return assert_clk; +} + +static inline int _write_fpga(u8 val) +{ + int i; + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO; + u32 dvo = gpio->simple_dvo; + + for (i=0; i<8; i++) { + dvo &= ~FPGA_CCLK; + gpio->simple_dvo = dvo; + dvo &= ~FPGA_DIN; + if (val & 1) + dvo |= FPGA_DIN; + gpio->simple_dvo = dvo; + dvo |= FPGA_CCLK; + gpio->simple_dvo = dvo; + val >>= 1; + } + + return 0; +} + +int fpga_wr_fn(void *buf, size_t len, int flush, int cookie) +{ + unsigned char *data = (unsigned char *) buf; + int i; + + fpga_debug("fpga_wr: buf %p / size %d\n", buf, len); + for (i = 0; i < len; i++) + _write_fpga(data[i]); + fpga_debug("\n"); + + return FPGA_SUCCESS; +} diff --git a/board/matrix_vision/mvbc_p/fpga.h b/board/matrix_vision/mvbc_p/fpga.h new file mode 100644 index 0000000..3723073 --- /dev/null +++ b/board/matrix_vision/mvbc_p/fpga.h @@ -0,0 +1,34 @@ +/* + * (C) Copyright 2002 + * Rich Ireland, Enterasys Networks, rireland@enterasys.com. + * Keith Outwater, keith_outwater@mvis.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +extern int mvbc_p_init_fpga(void); + +extern int fpga_pgm_fn(int assert_pgm, int flush, int cookie); +extern int fpga_status_fn(int cookie); +extern int fpga_config_fn(int assert, int flush, int cookie); +extern int fpga_done_fn(int cookie); +extern int fpga_clk_fn(int assert_clk, int flush, int cookie); +extern int fpga_wr_fn(void *buf, size_t len, int flush, int cookie); +extern int fpga_null_fn(int cookie); diff --git a/board/matrix_vision/mvbc_p/mvbc_p.c b/board/matrix_vision/mvbc_p/mvbc_p.c new file mode 100644 index 0000000..b61e84e --- /dev/null +++ b/board/matrix_vision/mvbc_p/mvbc_p.c @@ -0,0 +1,325 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * (C) Copyright 2005-2007 + * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mpc5xxx.h> +#include <malloc.h> +#include <pci.h> +#include <i2c.h> +#include <environment.h> +#include <fdt_support.h> +#include <asm/io.h> +#include "fpga.h" +#include "mvbc_p.h" + +#define SDRAM_MODE 0x00CD0000 +#define SDRAM_CONTROL 0x504F0000 +#define SDRAM_CONFIG1 0xD2322800 +#define SDRAM_CONFIG2 0x8AD70000 + +DECLARE_GLOBAL_DATA_PTR; + +static void sdram_start (int hi_addr) +{ + long hi_bit = hi_addr ? 0x01000000 : 0; + + /* unlock mode register */ + out_be32((u32*)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000000 | hi_bit); + + /* precharge all banks */ + out_be32((u32*)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000002 | hi_bit); + + /* precharge all banks */ + out_be32((u32*)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000002 | hi_bit); + + /* auto refresh */ + out_be32((u32*)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000004 | hi_bit); + + /* set mode register */ + out_be32((u32*)MPC5XXX_SDRAM_MODE, SDRAM_MODE); + + /* normal operation */ + out_be32((u32*)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | hi_bit); +} + +phys_addr_t initdram (int board_type) +{ + ulong dramsize = 0; + ulong test1, + test2; + + /* setup SDRAM chip selects */ + out_be32((u32*)MPC5XXX_SDRAM_CS0CFG, 0x0000001e); + + /* setup config registers */ + out_be32((u32*)MPC5XXX_SDRAM_CONFIG1, SDRAM_CONFIG1); + out_be32((u32*)MPC5XXX_SDRAM_CONFIG2, SDRAM_CONFIG2); + + /* find RAM size using SDRAM CS0 only */ + sdram_start(0); + test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000); + sdram_start(1); + test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000); + if (test1 > test2) { + sdram_start(0); + dramsize = test1; + } else + dramsize = test2; + + if (dramsize < (1 << 20)) + dramsize = 0; + + if (dramsize > 0) + out_be32((u32*)MPC5XXX_SDRAM_CS0CFG, 0x13 + + __builtin_ffs(dramsize >> 20) - 1); + else + out_be32((u32*)MPC5XXX_SDRAM_CS0CFG, 0); + + return dramsize; +} + +void mvbc_init_gpio(void) +{ + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO; + + printf("Ports : 0x%08x\n", gpio->port_config); + printf("PORCFG: 0x%08x\n", *(vu_long*)MPC5XXX_CDM_PORCFG); + + out_be32(&gpio->simple_ddr, SIMPLE_DDR); + out_be32(&gpio->simple_dvo, SIMPLE_DVO); + out_be32(&gpio->simple_ode, SIMPLE_ODE); + out_be32(&gpio->simple_gpioe, SIMPLE_GPIOEN); + + out_be32((u32*)&gpio->sint_ode, SINT_ODE); + out_be32((u32*)&gpio->sint_ddr, SINT_DDR); + out_be32((u32*)&gpio->sint_dvo, SINT_DVO); + out_be32((u32*)&gpio->sint_inten, SINT_INTEN); + out_be32((u32*)&gpio->sint_itype, SINT_ITYPE); + out_be32((u32*)&gpio->sint_gpioe, SINT_GPIOEN); + + out_8((u8*)MPC5XXX_WU_GPIO_ODE, WKUP_ODE); + out_8((u8*)MPC5XXX_WU_GPIO_DIR, WKUP_DIR); + out_8((u8*)MPC5XXX_WU_GPIO_DATA_O, WKUP_DO); + out_8((u8*)MPC5XXX_WU_GPIO_ENABLE, WKUP_EN); + + printf("simple_gpioe: 0x%08x\n", gpio->simple_gpioe); + printf("sint_gpioe : 0x%08x\n", gpio->sint_gpioe); +} + +void reset_environment(void) +{ + char *s, sernr[64]; + + printf("\n*** RESET ENVIRONMENT ***\n"); + memset(sernr, 0, sizeof(sernr)); + s = getenv("serial#"); + if (s) { + printf("found serial# : %s\n", s); + strncpy(sernr, s, 64); + } + gd->env_valid = 0; + env_relocate(); + if (s) + setenv("serial#", sernr); +} + +int misc_init_r(void) +{ + char *s = getenv("reset_env"); + + if (!s) { + if (in_8((u8*)MPC5XXX_WU_GPIO_DATA_I) & MPC5XXX_GPIO_WKUP_6) + return 0; + udelay(50000); + if (in_8((u8*)MPC5XXX_WU_GPIO_DATA_I) & MPC5XXX_GPIO_WKUP_6) + return 0; + udelay(50000); + if (in_8((u8*)MPC5XXX_WU_GPIO_DATA_I) & MPC5XXX_GPIO_WKUP_6) + return 0; + } + printf(" === FACTORY RESET ===\n"); + reset_environment(); + saveenv(); + + return -1; +} + +int checkboard(void) +{ + mvbc_init_gpio(); + printf("Board: Matrix Vision mvBlueCOUGAR-P\n"); + + return 0; +} + +void flash_preinit(void) +{ + /* + * Now, when we are in RAM, enable flash write + * access for detection process. + * Note that CS_BOOT cannot be cleared when + * executing in flash. + */ + clrbits_be32((u32*)MPC5XXX_BOOTCS_CFG, 0x1); +} + +void flash_afterinit(ulong size) +{ + out_be32((u32*)MPC5XXX_BOOTCS_START, START_REG(CFG_BOOTCS_START | + size)); + out_be32((u32*)MPC5XXX_CS0_START, START_REG(CFG_BOOTCS_START | + size)); + out_be32((u32*)MPC5XXX_BOOTCS_STOP, STOP_REG(CFG_BOOTCS_START | size, + size)); + out_be32((u32*)MPC5XXX_CS0_STOP, STOP_REG(CFG_BOOTCS_START | size, + size)); +} + +void pci_mvbc_fixup_irq(struct pci_controller *hose, pci_dev_t dev) +{ + unsigned char line = 0xff; + u32 base; + + if (PCI_BUS(dev) == 0) { + switch (PCI_DEV (dev)) { + case 0xa: /* FPGA */ + line = 3; + pci_hose_read_config_dword(hose, dev, PCI_BASE_ADDRESS_0, &base); + printf("found FPA - enable arbitration\n"); + writel(0x03, (u32*)(base + 0x80c0)); + writel(0xf0, (u32*)(base + 0x8080)); + break; + case 0xb: /* LAN */ + line = 2; + break; + case 0x1a: + break; + default: + printf ("***pci_scan: illegal dev = 0x%08x\n", PCI_DEV (dev)); + break; + } + pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, line); + } +} + +struct pci_controller hose = { + fixup_irq:pci_mvbc_fixup_irq +}; + +int mvbc_p_load_fpga(void) +{ + size_t data_size = 0; + void *fpga_data = NULL; + char *datastr = getenv("fpgadata"); + char *sizestr = getenv("fpgadatasize"); + + if (datastr) + fpga_data = (void *)simple_strtoul(datastr, NULL, 16); + if (sizestr) + data_size = (size_t)simple_strtoul(sizestr, NULL, 16); + + return fpga_load(0, fpga_data, data_size); +} + +extern void pci_mpc5xxx_init(struct pci_controller *); + +void pci_init_board(void) +{ + char *s; + int load_fpga = 1; + + mvbc_p_init_fpga(); + s = getenv("skip_fpga"); + if (s) { + printf("found 'skip_fpga' -> FPGA _not_ loaded !\n"); + load_fpga = 0; + } + if (load_fpga) { + printf("loading FPGA ... "); + mvbc_p_load_fpga(); + printf("done\n"); + } + pci_mpc5xxx_init(&hose); +} + +u8 *dhcp_vendorex_prep(u8 *e) +{ + char *ptr; + + /* DHCP vendor-class-identifier = 60 */ + if ((ptr = getenv("dhcp_vendor-class-identifier"))) { + *e++ = 60; + *e++ = strlen(ptr); + while (*ptr) + *e++ = *ptr++; + } + /* DHCP_CLIENT_IDENTIFIER = 61 */ + if ((ptr = getenv("dhcp_client_id"))) { + *e++ = 61; + *e++ = strlen(ptr); + while (*ptr) + *e++ = *ptr++; + } + + return e; +} + +u8 *dhcp_vendorex_proc (u8 *popt) +{ + return NULL; +} + +void show_boot_progress(int val) +{ + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO; + + switch(val) { + case 0: /* FPGA ok */ + setbits_be32(&gpio->simple_dvo, 0x80); + break; + case 1: + setbits_be32(&gpio->simple_dvo, 0x40); + break; + case 12: + setbits_be32(&gpio->simple_dvo, 0x20); + break; + case 15: + setbits_be32(&gpio->simple_dvo, 0x10); + break; + default: + break; + } + +} + +void ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup(blob, bd); + fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); +} diff --git a/board/matrix_vision/mvbc_p/mvbc_p.h b/board/matrix_vision/mvbc_p/mvbc_p.h new file mode 100644 index 0000000..3330798 --- /dev/null +++ b/board/matrix_vision/mvbc_p/mvbc_p.h @@ -0,0 +1,43 @@ +#ifndef __MVBC_H__ +#define __MVBC_H__ + +#define LED_G0 MPC5XXX_GPIO_SIMPLE_PSC2_0 +#define LED_G1 MPC5XXX_GPIO_SIMPLE_PSC2_1 +#define LED_Y MPC5XXX_GPIO_SIMPLE_PSC2_2 +#define LED_R MPC5XXX_GPIO_SIMPLE_PSC2_3 +#define ARB_X_EN MPC5XXX_GPIO_WKUP_PSC2_4 + +#define FPGA_DIN MPC5XXX_GPIO_SIMPLE_PSC3_0 +#define FPGA_CCLK MPC5XXX_GPIO_SIMPLE_PSC3_1 +#define FPGA_CONF_DONE MPC5XXX_GPIO_SIMPLE_PSC3_2 +#define FPGA_CONFIG MPC5XXX_GPIO_SIMPLE_PSC3_3 +#define FPGA_STATUS MPC5XXX_GPIO_SINT_PSC3_4 + +#define MAN_RST MPC5XXX_GPIO_WKUP_PSC6_0 +#define WD_TS MPC5XXX_GPIO_WKUP_PSC6_1 +#define WD_WDI MPC5XXX_GPIO_SIMPLE_PSC6_2 +#define COP_PRESENT MPC5XXX_GPIO_SIMPLE_PSC6_3 +#define FACT_RST MPC5XXX_GPIO_WKUP_6 +#define FLASH_RBY MPC5XXX_GPIO_WKUP_7 + +#define SIMPLE_DDR (LED_G0 | LED_G1 | LED_Y | LED_R | \ + FPGA_DIN | FPGA_CCLK | FPGA_CONFIG | WD_WDI) +#define SIMPLE_DVO (FPGA_CONFIG) +#define SIMPLE_ODE (FPGA_CONFIG) +#define SIMPLE_GPIOEN (LED_G0 | LED_G1 | LED_Y | LED_R | \ + FPGA_DIN | FPGA_CCLK | FPGA_CONF_DONE | FPGA_CONFIG |\ + WD_WDI | COP_PRESENT) + +#define SINT_ODE 0 +#define SINT_DDR 0 +#define SINT_DVO 0 +#define SINT_INTEN 0 +#define SINT_ITYPE 0 +#define SINT_GPIOEN (FPGA_STATUS) + +#define WKUP_ODE (MAN_RST) +#define WKUP_DIR (ARB_X_EN|MAN_RST|WD_TS) +#define WKUP_DO (ARB_X_EN|MAN_RST|WD_TS) +#define WKUP_EN (ARB_X_EN|MAN_RST|WD_TS|FACT_RST|FLASH_RBY) + +#endif diff --git a/board/matrix_vision/mvbc_p/mvbc_p_autoscript b/board/matrix_vision/mvbc_p/mvbc_p_autoscript new file mode 100644 index 0000000..5cee6c5 --- /dev/null +++ b/board/matrix_vision/mvbc_p/mvbc_p_autoscript @@ -0,0 +1,44 @@ +echo +echo "==== running autoscript ====" +echo +setenv bootdtb bootm \${kernel_boot} \${mv_initrd_addr_ram} \${mv_dtb_addr_ram} +setenv ramkernel setenv kernel_boot \${loadaddr} +setenv flashkernel setenv kernel_boot \${mv_kernel_addr} +setenv cpird cp \${mv_initrd_addr} \${mv_initrd_addr_ram} \${mv_initrd_length} +setenv bootfromflash run flashkernel cpird ramparam addcons e1000para bootdtb +setenv getdtb tftp \${mv_dtb_addr_ram} \${dtb_name} +setenv cpdtb cp \${mv_dtb_addr} \${mv_dtb_addr_ram} 0x2000 +setenv rundtb fdt addr \${mv_dtb_addr_ram}\;fdt boardsetup +setenv bootfromnet tftp \${mv_initrd_addr_ram} \${initrd_name}\;run ramkernel +if test ${console} = yes; +then +setenv addcons setenv bootargs \${bootargs} console=ttyPSC\${console_nr},\${baudrate}N8 +else +setenv addcons setenv bootargs \${bootargs} console=tty0 +fi +setenv e1000para setenv bootargs \${bootargs} e1000.TxDescriptors=1500 e1000.SmartPowerDownEnable=1 +setenv set_static_ip setenv ipaddr \${static_ipaddr} +setenv set_static_nm setenv netmask \${static_netmask} +setenv set_static_gw setenv gatewayip \${static_gateway} +setenv set_ip setenv ip \${ipaddr}::\${gatewayip}:\${netmask} +setenv ramparam setenv bootargs root=/dev/ram0 ro rootfstype=squashfs +if test ${autoscr_boot} != no; +then + if test ${netboot} = yes; + then + bootp + if test $? = 0; + then + echo "=== bootp succeeded -> netboot ===" + run set_ip + run getdtb rundtb bootfromnet ramparam addcons e1000para bootdtb + else + echo "=== netboot failed ===" + fi + fi + run set_static_ip set_static_nm set_static_gw set_ip + echo "=== bootfromflash ===" + run cpdtb rundtb bootfromflash +else + echo "=== boot stopped with autoscr_boot no ===" +fi diff --git a/board/ml2/flash.c b/board/ml2/flash.c index 87cb1ff..ad0f075 100644 --- a/board/ml2/flash.c +++ b/board/ml2/flash.c @@ -222,7 +222,7 @@ static int write_word (flash_info_t *info, ulong dest, unsigned long long data) unsigned long long result; int rc = ERR_OK; - result=*addr; + result = *addr; if ((result & data) != data) return ERR_NOT_ERASED; @@ -234,7 +234,7 @@ static int write_word (flash_info_t *info, ulong dest, unsigned long long data) eieio(); do { - result=*addr; + result = *addr; } while(~result & BIT_BUSY); *addr=CMD_READ_ARRAY; @@ -275,7 +275,7 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) { } while(cnt>=8) { - data=*((unsigned long long *)src); + data = *((unsigned long long *)src); if ((rc = write_word(info, wp, data)) != 0) return rc; src+=8; diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c index 11d4345..24ce807 100644 --- a/board/mpl/common/common_util.c +++ b/board/mpl/common/common_util.c @@ -357,8 +357,8 @@ void copy_old_env(ulong size) unsigned off; uchar *name, *value; - name=&name_buf[0]; - value=&value_buf[0]; + name = &name_buf[0]; + value = &value_buf[0]; len=size; off = sizeof(long); while (len > off) { @@ -377,8 +377,8 @@ void copy_old_env(ulong size) if(c == '\0') break; } while(len > off); - name=&name_buf[0]; - value=&value_buf[0]; + name = &name_buf[0]; + value = &value_buf[0]; if(strncmp((char *)name,"baudrate",8)!=0) { setenv((char *)name,(char *)value); } @@ -636,12 +636,12 @@ void video_get_info_str (int line_number, char *info) ++s; break; } - buf[i++]=*s; + buf[i++] = *s; } sprintf(&buf[i]," SN "); i+=4; for (; s < e; ++s) { - buf[i++]=*s; + buf[i++] = *s; } buf[i++]=0; } diff --git a/board/mpl/common/flash.c b/board/mpl/common/flash.c index a437dab..eb2702b 100644 --- a/board/mpl/common/flash.c +++ b/board/mpl/common/flash.c @@ -160,7 +160,7 @@ unsigned long flash_init (void) unsigned long size_b1,flashcr,size_reg; int mode; extern char version_string; - char *p=&version_string; + char *p = &version_string; /* Since we are relocated, we can set-up the CS finally */ setup_cs_reloc(); diff --git a/board/mpl/common/kbd.c b/board/mpl/common/kbd.c index 931ed43..b20b953 100644 --- a/board/mpl/common/kbd.c +++ b/board/mpl/common/kbd.c @@ -475,7 +475,7 @@ int kbd_read_data(void) int val; unsigned char status; - val=-1; + val = -1; status = kbd_read_status(); if (status & KBD_STAT_OBF) { val = kbd_read_input(); diff --git a/board/mpl/common/usb_uhci.c b/board/mpl/common/usb_uhci.c index 6778e40..666b999 100644 --- a/board/mpl/common/usb_uhci.c +++ b/board/mpl/common/usb_uhci.c @@ -536,7 +536,7 @@ void usb_check_int_chain(void) uhci_td_t *td,*prevtd; for(i=0;i<8;i++) { - prevtd=&td_int[i]; /* the first previous td is the skeleton td */ + prevtd = &td_int[i]; /* the first previous td is the skeleton td */ link=swap_32(td_int[i].link) & 0xfffffff0; /* next in chain */ td=(uhci_td_t *)link; /* assign it */ /* all interrupt TDs are finally linked to the td_int[0]. @@ -638,7 +638,7 @@ int usb_lowlevel_stop(void) return 1; irq_free_handler(irqvec); reset_hc(); - irqvec=-1; + irqvec = -1; return 0; } diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c index 2946ca1..d9e598c 100644 --- a/board/sbc8560/sbc8560.c +++ b/board/sbc8560/sbc8560.c @@ -33,6 +33,8 @@ #include <ioports.h> #include <spd_sdram.h> #include <miiphy.h> +#include <libfdt.h> +#include <fdt_support.h> long int fixed_sdram (void); @@ -421,7 +423,11 @@ long int fixed_sdram (void) #ifndef CFG_RAMBOOT volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR); +#if (CFG_SDRAM_SIZE == 512) + ddr->cs0_bnds = 0x0000000f; +#else ddr->cs0_bnds = 0x00000007; +#endif ddr->cs1_bnds = 0x0010001f; ddr->cs2_bnds = 0x00000000; ddr->cs3_bnds = 0x00000000; @@ -452,3 +458,29 @@ long int fixed_sdram (void) return CFG_SDRAM_SIZE * 1024 * 1024; } #endif /* !defined(CONFIG_SPD_EEPROM) */ + + +#if defined(CONFIG_OF_BOARD_SETUP) +void +ft_board_setup(void *blob, bd_t *bd) +{ + int node, tmp[2]; +#ifdef CONFIG_PCI + const char *path; +#endif + + ft_cpu_setup(blob, bd); + + node = fdt_path_offset(blob, "/aliases"); + tmp[0] = 0; + if (node >= 0) { +#ifdef CONFIG_PCI + path = fdt_getprop(blob, node, "pci0", NULL); + if (path) { + tmp[1] = hose.last_busno - hose.first_busno; + do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); + } +#endif + } +} +#endif diff --git a/board/snmc/qs850/qs850.c b/board/snmc/qs850/qs850.c index ba5a8fb..2fbe8ae 100644 --- a/board/snmc/qs850/qs850.c +++ b/board/snmc/qs850/qs850.c @@ -86,6 +86,13 @@ const uint sdram_table[] = * * Always return 1 */ +#if defined(CONFIG_QS850) +#define BOARD_IDENTITY "QS850" +#elif defined(CONFIG_QS823) +#define BOARD_IDENTITY "QS823" +#else +#define BOARD_IDENTITY "QS???" +#endif int checkboard (void) { @@ -96,14 +103,8 @@ int checkboard (void) i = getenv_r("serial#", buf, sizeof(buf)); s = (i>0) ? buf : NULL; -#ifdef CONFIG_QS850 - if (!s || strncmp(s, "QS850", 5)) { - puts ("### No HW ID - assuming QS850"); -#endif -#ifdef CONFIG_QS823 - if (!s || strncmp(s, "QS823", 5)) { - puts ("### No HW ID - assuming QS823"); -#endif + if (!s || strncmp(s, BOARD_IDENTITY, 5)) { + puts ("### No HW ID - assuming " BOARD_IDENTITY); } else { for (e=s; *e; ++e) { if (*e == ' ') diff --git a/board/tqc/tqm5200/cmd_stk52xx.c b/board/tqc/tqm5200/cmd_stk52xx.c index 58039d4..fd1e68b 100644 --- a/board/tqc/tqm5200/cmd_stk52xx.c +++ b/board/tqc/tqm5200/cmd_stk52xx.c @@ -192,10 +192,10 @@ static int i2s_play_wave(unsigned long addr, unsigned long len) psc->command = (PSC_RX_ENABLE | PSC_TX_ENABLE); for(i = 0;i < (len / 4); i++) { - swapped[3]=*wave_file++; - swapped[2]=*wave_file++; - swapped[1]=*wave_file++; - swapped[0]=*wave_file++; + swapped[3] = *wave_file++; + swapped[2] = *wave_file++; + swapped[1] = *wave_file++; + swapped[0] = *wave_file++; psc->psc_buffer_32 = *((unsigned long*)swapped); while (psc->tfnum > 400) { if(ctrlc()) diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index da38c32..1c0a416 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -218,15 +218,15 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) iflag = disable_interrupts(); #if (CONFIG_COMMANDS & CFG_CMD_USB) - /* - * turn off USB to prevent the host controller from writing to the - * SDRAM while Linux is booting. This could happen (at least for OHCI - * controller), because the HCCA (Host Controller Communication Area) - * lies within the SDRAM and the host controller writes continously to - * this area (as busmaster!). The HccaFrameNumber is for example - * updated every 1 ms within the HCCA structure in SDRAM! For more - * details see the OpenHCI specification. - */ + /* + * turn off USB to prevent the host controller from writing to the + * SDRAM while Linux is booting. This could happen (at least for OHCI + * controller), because the HCCA (Host Controller Communication Area) + * lies within the SDRAM and the host controller writes continously to + * this area (as busmaster!). The HccaFrameNumber is for example + * updated every 1 ms within the HCCA structure in SDRAM! For more + * details see the OpenHCI specification. + */ usb_stop(); #endif diff --git a/common/cmd_fdc.c b/common/cmd_fdc.c index e4fbf29..8493def 100644 --- a/common/cmd_fdc.c +++ b/common/cmd_fdc.c @@ -512,7 +512,7 @@ int fdc_read_data(unsigned char *buffer, unsigned long blocks,FDC_COMMAND_STRUCT if(readblk>blocks) /* is end within 1st track */ readblk=blocks; /* yes, correct it */ PRINTF("we read %ld blocks start %ld\n",readblk,pCMD->blnr); - bufferw=&buffer[0]; /* setup working buffer */ + bufferw = &buffer[0]; /* setup working buffer */ do { retryrw: len=sect_size * readblk; @@ -566,7 +566,7 @@ retryrw: * we need to get the results */ fdc_terminate(pCMD); offset+=(sect_size*readblk); /* set up buffer pointer */ - bufferw=&buffer[offset]; + bufferw = &buffer[offset]; pCMD->blnr+=readblk; /* update current block nr */ blocks-=readblk; /* update blocks */ if(blocks==0) diff --git a/common/cmd_flash.c b/common/cmd_flash.c index 9bd8074..a7f66dd 100644 --- a/common/cmd_flash.c +++ b/common/cmd_flash.c @@ -210,7 +210,7 @@ flash_fill_sect_ranges (ulong addr_first, ulong addr_last, s_last [bank] = -1; /* last sector to erase */ } - for (bank=0,info=&flash_info[0]; + for (bank=0,info = &flash_info[0]; (bank < CFG_MAX_FLASH_BANKS) && (addr_first <= addr_last); ++bank, ++info) { ulong b_end; @@ -427,7 +427,7 @@ int flash_sect_erase (ulong addr_first, ulong addr_last) s_first, s_last, &planned ); if (planned && (rcode == 0)) { - for (bank=0,info=&flash_info[0]; + for (bank=0,info = &flash_info[0]; (bank < CFG_MAX_FLASH_BANKS) && (rcode == 0); ++bank, ++info) { if (s_first[bank]>=0) { @@ -651,7 +651,7 @@ int flash_sect_protect (int p, ulong addr_first, ulong addr_last) protected = 0; if (planned && (rcode == 0)) { - for (bank=0,info=&flash_info[0]; bank < CFG_MAX_FLASH_BANKS; ++bank, ++info) { + for (bank=0,info = &flash_info[0]; bank < CFG_MAX_FLASH_BANKS; ++bank, ++info) { if (info->flash_id == FLASH_UNKNOWN) { continue; } diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c index 9141dcc..dcbbc99 100644 --- a/common/cmd_fpga.c +++ b/common/cmd_fpga.c @@ -85,7 +85,7 @@ int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size) length = (*dataptr << 8) + *(dataptr+1); dataptr+=2; for(i=0;i<length;i++) - buffer[i]=*dataptr++; + buffer[i] = *dataptr++; printf(" design filename = \"%s\"\n", buffer); @@ -99,7 +99,7 @@ int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size) length = (*dataptr << 8) + *(dataptr+1); dataptr+=2; for(i=0;i<length;i++) - buffer[i]=*dataptr++; + buffer[i] = *dataptr++; printf(" part number = \"%s\"\n", buffer); /* get date (identifier, length, string) */ @@ -112,7 +112,7 @@ int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size) length = (*dataptr << 8) + *(dataptr+1); dataptr+=2; for(i=0;i<length;i++) - buffer[i]=*dataptr++; + buffer[i] = *dataptr++; printf(" date = \"%s\"\n", buffer); /* get time (identifier, length, string) */ @@ -124,7 +124,7 @@ int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size) length = (*dataptr << 8) + *(dataptr+1); dataptr+=2; for(i=0;i<length;i++) - buffer[i]=*dataptr++; + buffer[i] = *dataptr++; printf(" time = \"%s\"\n", buffer); /* get fpga data length (identifier, length) */ diff --git a/common/cmd_mp.c b/common/cmd_mp.c index 26a57c5..b2a397c 100644 --- a/common/cmd_mp.c +++ b/common/cmd_mp.c @@ -35,7 +35,7 @@ cpu_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) cpuid = simple_strtoul(argv[1], NULL, 10); if (cpuid >= CONFIG_NR_CPUS) { - printf ("Core num: %d is out of range[0..%d]\n", + printf ("Core num: %lu is out of range[0..%d]\n", cpuid, CONFIG_NR_CPUS - 1); return 1; } diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c index e648f7d..f357465 100644 --- a/common/cmd_scsi.c +++ b/common/cmd_scsi.c @@ -171,7 +171,7 @@ removable: if(scsi_max_devs>0) scsi_curr_dev=0; else - scsi_curr_dev=-1; + scsi_curr_dev = -1; } diff --git a/common/cmd_usb.c b/common/cmd_usb.c index 30caa98..c62ca97 100644 --- a/common/cmd_usb.c +++ b/common/cmd_usb.c @@ -32,7 +32,7 @@ #include <usb.h> #ifdef CONFIG_USB_STORAGE -static int usb_stor_curr_dev=-1; /* current device */ +static int usb_stor_curr_dev = -1; /* current device */ #endif /* some display routines (info command) */ diff --git a/common/devices.c b/common/devices.c index ddf8f8e..9cc963a 100644 --- a/common/devices.c +++ b/common/devices.c @@ -125,7 +125,7 @@ int device_deregister(char *devname) device_t *dev = NULL; char temp_names[3][8]; - dev_index=-1; + dev_index = -1; for (i=1; i<=ListNumItems(devlist); i++) { dev = ListGetPtrToItem (devlist, i); if(strcmp(dev->name,devname)==0) { diff --git a/common/fdt_support.c b/common/fdt_support.c index 3828228..93b144e 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -442,3 +442,90 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) prop, compat, fdt_strerror(err)); } #endif /* CONFIG_HAS_FSL_DR_USB */ + +#if defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx) +/* + * update crypto node properties to a specified revision of the SEC + * called with sec_rev == 0 if not on an mpc8xxxE processor + */ +void fdt_fixup_crypto_node(void *blob, int sec_rev) +{ + const struct sec_rev_prop { + u32 sec_rev; + u32 num_channels; + u32 channel_fifo_len; + u32 exec_units_mask; + u32 descriptor_types_mask; + } sec_rev_prop_list [] = { + { 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */ + { 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */ + { 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */ + { 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */ + { 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */ + { 0x0303, 4, 24, 0x97c, 0x03ab0abf }, /* SEC 3.3 */ + }; + char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) * + sizeof("fsl,secX.Y")]; + int crypto_node, sec_idx, err; + char *p; + u32 val; + + /* locate crypto node based on lowest common compatible */ + crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0"); + if (crypto_node == -FDT_ERR_NOTFOUND) + return; + + /* delete it if not on an E-processor */ + if (crypto_node > 0 && !sec_rev) { + fdt_del_node(blob, crypto_node); + return; + } + + /* else we got called for possible uprev */ + for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++) + if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev) + break; + + if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) { + puts("warning: unknown SEC revision number\n"); + return; + } + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].num_channels); + err = fdt_setprop(blob, crypto_node, "fsl,num-channels", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].descriptor_types_mask); + err = fdt_setprop(blob, crypto_node, "fsl,descriptor-types-mask", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].exec_units_mask); + err = fdt_setprop(blob, crypto_node, "fsl,exec-units-mask", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].channel_fifo_len); + err = fdt_setprop(blob, crypto_node, "fsl,channel-fifo-len", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = 0; + while (sec_idx >= 0) { + p = compat_strlist + val; + val += sprintf(p, "fsl,sec%d.%d", + (sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8, + sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1; + sec_idx--; + } + err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, val); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); +} +#endif /* defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx) */ diff --git a/common/flash.c b/common/flash.c index 888ff9c..fe39d55 100644 --- a/common/flash.c +++ b/common/flash.c @@ -104,7 +104,7 @@ addr2info (ulong addr) flash_info_t *info; int i; - for (i=0, info=&flash_info[0]; i<CFG_MAX_FLASH_BANKS; ++i, ++info) { + for (i=0, info = &flash_info[0]; i<CFG_MAX_FLASH_BANKS; ++i, ++info) { if (info->flash_id != FLASH_UNKNOWN && addr >= info->start[0] && /* WARNING - The '- 1' is needed if the flash diff --git a/common/hush.c b/common/hush.c index b43f618..75c18ce 100644 --- a/common/hush.c +++ b/common/hush.c @@ -953,7 +953,7 @@ static int b_adduint(o_string *o, unsigned int i) static int static_get(struct in_str *i) { - int ch=*i->p++; + int ch = *i->p++; if (ch=='\0') return EOF; return ch; } @@ -1104,7 +1104,7 @@ static int file_get(struct in_str *i) ch = 0; /* If there is data waiting, eat it up */ if (i->p && *i->p) { - ch=*i->p++; + ch = *i->p++; } else { /* need to double check i->file because we might be doing something * more complicated by now, like sourcing or substituting. */ @@ -1121,7 +1121,7 @@ static int file_get(struct in_str *i) i->__promptme = 0; #endif if (i->p && *i->p) { - ch=*i->p++; + ch = *i->p++; } #ifndef __U_BOOT__ } else { diff --git a/common/lcd.c b/common/lcd.c index ebf377a..eec1f53 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -539,7 +539,7 @@ void bitmap_plot (int x, int y) debug ("Logo: width %d height %d colors %d cmap %d\n", BMP_LOGO_WIDTH, BMP_LOGO_HEIGHT, BMP_LOGO_COLORS, - sizeof(bmp_logo_palette)/(sizeof(ushort))); + (int)(sizeof(bmp_logo_palette)/(sizeof(ushort)))); bmap = &bmp_logo_bitmap[0]; fb = (uchar *)(lcd_base + y * lcd_line_length + x); @@ -728,7 +728,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) WATCHDOG_RESET(); for (j = 0; j < width ; j++) #if defined(CONFIG_PXA250) - *(fb++)=*(bmap++); + *(fb++) = *(bmap++); #elif defined(CONFIG_MPC823) || defined(CONFIG_MCC200) *(fb++)=255-*(bmap++); #endif diff --git a/common/usb.c b/common/usb.c index a0107dc..a45d113 100644 --- a/common/usb.c +++ b/common/usb.c @@ -252,7 +252,7 @@ int usb_set_maxpacket(struct usb_device *dev) for(i=0; i<dev->config.bNumInterfaces;i++) { for(ii=0; ii<dev->config.if_desc[i].bNumEndpoints; ii++) { - ep=&dev->config.if_desc[i].ep_desc[ii]; + ep = &dev->config.if_desc[i].ep_desc[ii]; b=ep->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; if((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)==USB_ENDPOINT_XFER_CONTROL) { /* Control => bidirectional */ @@ -627,7 +627,7 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size) if (size <= 0 || !buf || !index) return -1; buf[0] = 0; - tbuf=&mybuf[0]; + tbuf = &mybuf[0]; /* get langid for strings if it's not yet known */ if (!dev->have_langid) { @@ -857,7 +857,7 @@ void usb_scan_devices(void) /* first make all devices unknown */ for(i=0;i<USB_MAX_DEVICE;i++) { memset(&usb_dev[i],0,sizeof(struct usb_device)); - usb_dev[i].devnum=-1; + usb_dev[i].devnum = -1; } dev_index=0; /* device 0 is always present (root hub, so let it analyze) */ diff --git a/common/usb_kbd.c b/common/usb_kbd.c index 1e79208..c876495 100644 --- a/common/usb_kbd.c +++ b/common/usb_kbd.c @@ -730,8 +730,8 @@ static int usb_kbd_get_hid_desc(struct usb_device *dev) return -1; } printf(" report descriptor (size %u, read %d)\n", len, index); - start=&buffer[0]; - end=&buffer[len]; + start = &buffer[0]; + end = &buffer[len]; i=0; do { index=fetch_item(start,end,&item); diff --git a/common/usb_storage.c b/common/usb_storage.c index 3e113b4..d8fbb69 100644 --- a/common/usb_storage.c +++ b/common/usb_storage.c @@ -731,7 +731,7 @@ int usb_stor_CB_transport(ccb *srb, struct us_data *us) ccb reqsrb; int retry,notready; - psrb=&reqsrb; + psrb = &reqsrb; status=USB_STOR_TRANSPORT_GOOD; retry=0; notready=0; @@ -776,7 +776,7 @@ do_retry: psrb->cmd[1]=srb->lun<<5; psrb->cmd[4]=18; psrb->datalen=18; - psrb->pdata=&srb->sense_buf[0]; + psrb->pdata = &srb->sense_buf[0]; psrb->cmdlen=12; /* issue the command */ result=usb_stor_CB_comdat(psrb,us); @@ -858,7 +858,7 @@ static int usb_request_sense(ccb *srb,struct us_data *ss) srb->cmd[1]=srb->lun<<5; srb->cmd[4]=18; srb->datalen=18; - srb->pdata=&srb->sense_buf[0]; + srb->pdata = &srb->sense_buf[0]; srb->cmdlen=12; ss->transport(srb,ss); USB_STOR_PRINTF("Request Sense returned %02X %02X %02X\n",srb->sense_buf[2],srb->sense_buf[12],srb->sense_buf[13]); diff --git a/cpu/arm926ejs/davinci/ether.c b/cpu/arm926ejs/davinci/ether.c index d286ec0..5ae035b 100644 --- a/cpu/arm926ejs/davinci/ether.c +++ b/cpu/arm926ejs/davinci/ether.c @@ -357,6 +357,8 @@ static int dm644x_eth_hw_init(void) phy.auto_negotiate = gen_auto_negotiate; } + printf("Ethernet PHY: %s\n", phy.name); + return(1); } diff --git a/cpu/i386/serial.c b/cpu/i386/serial.c index baf35e5..8b5f8fa 100644 --- a/cpu/i386/serial.c +++ b/cpu/i386/serial.c @@ -413,8 +413,8 @@ void kgdb_serial_init(void) * Init onboard 16550 UART */ outb(0x80, UART1_BASE + UART_LCR); /* set DLAB bit */ - outb(bdiv & 0xff), UART1_BASE + UART_DLL); /* set divisor for 9600 baud */ - outb(bdiv >> 8), UART1_BASE + UART_DLM); /* set divisor for 9600 baud */ + outb((bdiv & 0xff), UART1_BASE + UART_DLL); /* set divisor for 9600 baud */ + outb((bdiv >> 8 ), UART1_BASE + UART_DLM); /* set divisor for 9600 baud */ outb(0x03, UART1_BASE + UART_LCR); /* line control 8 bits no parity */ outb(0x00, UART1_BASE + UART_FCR); /* disable FIFO */ outb(0x00, UART1_BASE + UART_MCR); /* no modem control DTR RTS */ diff --git a/cpu/ixp/npe/npe.c b/cpu/ixp/npe/npe.c index a33b956..892096b 100644 --- a/cpu/ixp/npe/npe.c +++ b/cpu/ixp/npe/npe.c @@ -67,7 +67,7 @@ static void *npe_alloc(int size) p = npe_alloc_free; npe_alloc_free += size; } else { - printf("%s: failed (count=%d, size=%d)!\n", count, size); + printf("npe_alloc: failed (count=%d, size=%d)!\n", count, size); } return p; } diff --git a/cpu/mpc83xx/fdt.c b/cpu/mpc83xx/fdt.c index 02c4d05..fda85c1 100644 --- a/cpu/mpc83xx/fdt.c +++ b/cpu/mpc83xx/fdt.c @@ -26,6 +26,7 @@ #include <common.h> #include <libfdt.h> #include <fdt_support.h> +#include <asm/processor.h> extern void ft_qe_setup(void *blob); @@ -33,6 +34,23 @@ DECLARE_GLOBAL_DATA_PTR; void ft_cpu_setup(void *blob, bd_t *bd) { + immap_t *immr = (immap_t *)CFG_IMMR; + int spridr = immr->sysconf.spridr; + + /* + * delete crypto node if not on an E-processor + * initial revisions of the MPC834xE/6xE have the original SEC 2.0. + * EA revisions got the SEC uprevved to 2.4 but since the default device + * tree contains SEC 2.0 properties we uprev them here. + */ + if (!IS_E_PROCESSOR(spridr)) + fdt_fixup_crypto_node(blob, 0); + else if (IS_E_PROCESSOR(spridr) && + (SPR_FAMILY(spridr) == SPR_834X_FAMILY || + SPR_FAMILY(spridr) == SPR_836X_FAMILY) && + REVID_MAJOR(spridr) >= 2) + fdt_fixup_crypto_node(blob, 0x0204); + #if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\ defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) fdt_fixup_ethernet(blob, bd); @@ -60,7 +78,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) #ifdef CFG_NS16550 do_fixup_by_compat_u32(blob, "ns16550", - "clock-frequency", bd->bi_busfreq, 1); + "clock-frequency", CFG_NS16550_CLK, 1); #endif fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c index 0d50549..bde8e56 100644 --- a/cpu/mpc85xx/cpu.c +++ b/cpu/mpc85xx/cpu.c @@ -97,7 +97,7 @@ int checkcpu (void) if (cpu) { puts(cpu->name); - if (svr & 0x80000) + if (IS_E_PROCESSOR(svr)) puts("E"); } else { puts("Unknown"); diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c index 736aef1..4feb751 100644 --- a/cpu/mpc85xx/cpu_init.c +++ b/cpu/mpc85xx/cpu_init.c @@ -261,37 +261,50 @@ int cpu_init_r(void) volatile uint cache_ctl; uint svr, ver; uint l2srbar; + u32 l2siz_field; svr = get_svr(); ver = SVR_SOC_VER(svr); asm("msync;isync"); cache_ctl = l2cache->l2ctl; + l2siz_field = (cache_ctl >> 28) & 0x3; - switch (cache_ctl & 0x30000000) { - case 0x20000000: - if (ver == SVR_8548 || ver == SVR_8548_E || - ver == SVR_8544 || ver == SVR_8568_E) { - puts ("512 KB "); - /* set L2E=1, L2I=1, & L2SRAM=0 */ - cache_ctl = 0xc0000000; + switch (l2siz_field) { + case 0x0: + printf(" unknown size (0x%08x)\n", cache_ctl); + return -1; + break; + case 0x1: + if (ver == SVR_8540 || ver == SVR_8560 || + ver == SVR_8541 || ver == SVR_8541_E || + ver == SVR_8555 || ver == SVR_8555_E) { + puts("128 KB "); + /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */ + cache_ctl = 0xc4000000; } else { puts("256 KB "); + cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */ + } + break; + case 0x2: + if (ver == SVR_8540 || ver == SVR_8560 || + ver == SVR_8541 || ver == SVR_8541_E || + ver == SVR_8555 || ver == SVR_8555_E) { + puts("256 KB "); /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */ cache_ctl = 0xc8000000; + } else { + puts ("512 KB "); + /* set L2E=1, L2I=1, & L2SRAM=0 */ + cache_ctl = 0xc0000000; } break; - case 0x10000000: - puts("256 KB "); - if (ver == SVR_8544 || ver == SVR_8544_E) { - cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */ - } + case 0x3: + puts("1024 KB "); + /* set L2E=1, L2I=1, & L2SRAM=0 */ + cache_ctl = 0xc0000000; break; - case 0x30000000: - case 0x00000000: - default: - printf(" unknown size (0x%08x)\n", cache_ctl); - return -1; } if (l2cache->l2ctl & 0x80000000) { diff --git a/cpu/mpc85xx/fdt.c b/cpu/mpc85xx/fdt.c index 92952e6..c159934 100644 --- a/cpu/mpc85xx/fdt.c +++ b/cpu/mpc85xx/fdt.c @@ -29,6 +29,7 @@ #include <asm/processor.h> extern void ft_qe_setup(void *blob); + #ifdef CONFIG_MP #include "mp.h" DECLARE_GLOBAL_DATA_PTR; @@ -205,6 +206,10 @@ static inline void ft_fixup_cache(void *blob) void ft_cpu_setup(void *blob, bd_t *bd) { + /* delete crypto node if not on an E-processor */ + if (!IS_E_PROCESSOR(get_svr())) + fdt_fixup_crypto_node(blob, 0); + #if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\ defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) fdt_fixup_ethernet(blob, bd); @@ -224,7 +229,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) #ifdef CFG_NS16550 do_fixup_by_compat_u32(blob, "ns16550", - "clock-frequency", bd->bi_busfreq, 1); + "clock-frequency", CFG_NS16550_CLK, 1); #endif #ifdef CONFIG_CPM2 diff --git a/cpu/mpc85xx/mp.c b/cpu/mpc85xx/mp.c index a527cf3..554830f 100644 --- a/cpu/mpc85xx/mp.c +++ b/cpu/mpc85xx/mp.c @@ -50,12 +50,12 @@ int cpu_status(int nr) if (nr == id) { table = (u32 *)get_spin_addr(); - printf("table base @ 0x%08x\n", table); + printf("table base @ 0x%p\n", table); } else { table = (u32 *)get_spin_addr() + nr * NUM_BOOT_ENTRY; printf("Running on cpu %d\n", id); printf("\n"); - printf("table @ 0x%08x:\n", table); + printf("table @ 0x%p\n", table); printf(" addr - 0x%08x\n", table[BOOT_ENTRY_ADDR_LOWER]); printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]); printf(" r3 - 0x%08x\n", table[BOOT_ENTRY_R3_LOWER]); diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S index 2b5d90e..10fe936 100644 --- a/cpu/mpc85xx/start.S +++ b/cpu/mpc85xx/start.S @@ -188,11 +188,12 @@ _start_e500: lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@h ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@l - lis r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@l + /* Align the mapping to 16MB */ + lis r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xff000000, (MAS2_I|MAS2_G))@h + ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xff000000, (MAS2_I|MAS2_G))@l - lis r9,FSL_BOOKE_MAS3(0xff800000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(0xff800000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l + lis r9,FSL_BOOKE_MAS3(0xff000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h + ori r9,r9,FSL_BOOKE_MAS3(0xff000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l mtspr MAS0,r6 mtspr MAS1,r7 diff --git a/cpu/mpc86xx/fdt.c b/cpu/mpc86xx/fdt.c index 379306e..80a5c78 100644 --- a/cpu/mpc86xx/fdt.c +++ b/cpu/mpc86xx/fdt.c @@ -30,6 +30,6 @@ void ft_cpu_setup(void *blob, bd_t *bd) #ifdef CFG_NS16550 do_fixup_by_compat_u32(blob, "ns16550", - "clock-frequency", bd->bi_busfreq, 1); + "clock-frequency", CFG_NS16550_CLK, 1); #endif } diff --git a/cpu/mpc8xx/video.c b/cpu/mpc8xx/video.c index 8bf8e46..ef91165 100644 --- a/cpu/mpc8xx/video.c +++ b/cpu/mpc8xx/video.c @@ -833,10 +833,10 @@ static void video_encoder_init (void) puts ("[VIDEO ENCODER] Configuring the encoder...\n"); - printf ("Sending %d bytes (@ %08lX) to I2C 0x%X:\n ", + printf ("Sending %zu bytes (@ %08lX) to I2C 0x%lX:\n ", sizeof(video_encoder_data), (ulong)video_encoder_data, - VIDEO_I2C_ADDR); + (ulong)VIDEO_I2C_ADDR); for (i=0; i<sizeof(video_encoder_data); ++i) { printf(" %02X", video_encoder_data[i]); } diff --git a/cpu/ppc4xx/40x_spd_sdram.c b/cpu/ppc4xx/40x_spd_sdram.c index 42fd7fb..b21b13e 100644 --- a/cpu/ppc4xx/40x_spd_sdram.c +++ b/cpu/ppc4xx/40x_spd_sdram.c @@ -126,9 +126,9 @@ long int spd_sdram(int(read_spd)(uint addr)) int sdram0_pmit=0x07c00000; #ifndef CONFIG_405EP /* not on PPC405EP */ - int sdram0_besr0=-1; - int sdram0_besr1=-1; - int sdram0_eccesr=-1; + int sdram0_besr0 = -1; + int sdram0_besr1 = -1; + int sdram0_eccesr = -1; #endif int sdram0_ecccfg; diff --git a/doc/README.mvbc_p b/doc/README.mvbc_p new file mode 100644 index 0000000..e3fcb4e --- /dev/null +++ b/doc/README.mvbc_p @@ -0,0 +1,73 @@ +Matrix Vision mvBlueCOUGAR-P (mvBC-P) +------------------------------------- + +1. Board Description + + The mvBC-P is a 70x40x40mm multi board gigabit ethernet network camera + with main focus on GigEVision protocol in combination with local image + preprocessing. + + Power Supply is either VDC 48V or Pover over Ethernet (PoE). + +2 System Components + +2.1 CPU + Freescale MPC5200B CPU running at 400MHz core and 133MHz XLB/IPB. + 64MB SDRAM @ 133MHz. + 8 MByte Nor Flash on local bus. + 1 serial ports. Console running on ttyS0 @ 115200 8N1. + +2.2 PCI + PCI clock fixed at 66MHz. Arbitration inside FPGA. + Intel GD82541ER network MAC/PHY and FPGA connected. + +2.3 FPGA + Altera Cyclone-II EP2C8 with PCI DMA engine. + Connects to Matrix Vision specific CCD/CMOS sensor interface. + Utilizes 64MB Nand Flash. + +2.3.1 I/O @ FPGA + 2 Outputs : photo coupler + 2 Inputs : photo coupler + +2.4 I2C + LM75 @ 0x90 for temperature monitoring. + EEPROM @ 0xA0 for vendor specifics. + image sensor interface (slave adresses depend on sensor) + +3 Flash layout. + + reset vector is 0x00000100, i.e. "LOWBOOT". + + FF800000 u-boot + FF840000 u-boot script image + FF850000 redundant u-boot script image + FF860000 FPGA raw bit file + FF8A0000 tbd. + FF900000 root FS + FFC00000 kernel + FFFC0000 device tree blob + FFFD0000 redundant device tree blob + FFFE0000 environment + FFFF0000 redundant environment + + mtd partitions are propagated to linux kernel via device tree blob. + +4 Booting + + On startup the bootscript @ FF840000 is executed. This script can be + exchanged easily. Default boot mode is "boot from flash", i.e. system + works stand-alone. + + This behaviour depends on some environment variables : + + "netboot" : yes ->try dhcp/bootp and boot from network. + A "dhcp_client_id" and "dhcp_vendor-class-identifier" can be used for + DHCP server configuration, e.g. to provide different images to + different devices. + + During netboot the system tries to get 3 image files: + 1. Kernel - name + data is given during BOOTP. + 2. Initrd - name is stored in "initrd_name" + 3. device tree blob - name is stored in "dtb_name" + Fallback files are the flash versions. diff --git a/drivers/block/sym53c8xx.c b/drivers/block/sym53c8xx.c index 87b63b7..b880435 100644 --- a/drivers/block/sym53c8xx.c +++ b/drivers/block/sym53c8xx.c @@ -784,7 +784,7 @@ retry: pccb->msgout[0]=SCSI_IDENTIFY; transbytes=pccb->trans_bytes; tmpptr=pccb->pdata; - pccb->pdata=&pccb->sense_buf[0]; + pccb->pdata = &pccb->sense_buf[0]; datalen=pccb->datalen; pccb->datalen=14; tmpstat=pccb->status; diff --git a/drivers/input/pc_keyb.c b/drivers/input/pc_keyb.c index 81d3e98..33e7c5f 100644 --- a/drivers/input/pc_keyb.c +++ b/drivers/input/pc_keyb.c @@ -64,7 +64,7 @@ static int kbd_read_data(void) int val; unsigned char status; - val=-1; + val = -1; status = kbd_read_status(); if (status & KBD_STAT_OBF) { val = kbd_read_input(); diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index c0ea97b..4340b1b 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -301,7 +301,7 @@ static inline void flash_unmap(flash_info_t *info, flash_sect_t sect, /*----------------------------------------------------------------------- * make a proper sized command based on the port and chip widths */ -static void flash_make_cmd (flash_info_t * info, ulong cmd, void *cmdbuf) +static void flash_make_cmd(flash_info_t *info, u32 cmd, void *cmdbuf) { int i; int cword_offset; @@ -316,9 +316,9 @@ static void flash_make_cmd (flash_info_t * info, ulong cmd, void *cmdbuf) val = *((uchar*)&cmd + cword_offset); #else cp_offset = i - 1; - val = *((uchar*)&cmd + sizeof(ulong) - cword_offset - 1); + val = *((uchar*)&cmd + sizeof(u32) - cword_offset - 1); #endif - cp[cp_offset] = (cword_offset >= sizeof(ulong)) ? 0x00 : val; + cp[cp_offset] = (cword_offset >= sizeof(u32)) ? 0x00 : val; } } @@ -433,7 +433,7 @@ static ulong flash_read_long (flash_info_t * info, flash_sect_t sect, * Write a proper sized command to the correct address */ static void flash_write_cmd (flash_info_t * info, flash_sect_t sect, - uint offset, ulong cmd) + uint offset, u32 cmd) { void *addr; diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 7dc33be..a7afa90 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -59,8 +59,8 @@ fsl_pci_init(struct pci_controller *hose) pci_dev_t dev = PCI_BDF(busno,0,0); /* Initialize ATMU registers based on hose regions and flags */ - volatile pot_t *po=&pci->pot[1]; /* skip 0 */ - volatile pit_t *pi=&pci->pit[0]; /* ranges from: 3 to 1 */ + volatile pot_t *po = &pci->pot[1]; /* skip 0 */ + volatile pit_t *pi = &pci->pit[0]; /* ranges from: 3 to 1 */ #ifdef DEBUG int neg_link_w; diff --git a/drivers/pci/pci_sh4.c b/drivers/pci/pci_sh4.c index 1290c0a..057b6dd 100644 --- a/drivers/pci/pci_sh4.c +++ b/drivers/pci/pci_sh4.c @@ -74,3 +74,15 @@ int pci_sh4_init(struct pci_controller *hose) hose->last_busno = pci_hose_scan(hose); return 0; } + +int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev) +{ + return 0; +} + +#ifdef CONFIG_PCI_SCAN_SHOW +int pci_print_dev(struct pci_controller *hose, pci_dev_t dev) +{ + return 1; +} +#endif /* CONFIG_PCI_SCAN_SHOW */ diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index 4ccaee2..8bbfcf9 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -124,8 +124,6 @@ static NS16550_t serial_ports[4] = { static int calc_divisor (NS16550_t port) { - uint32_t clk_divisor; - #ifdef CONFIG_OMAP1510 /* If can't cleanly clock 115200 set div to 1 */ if ((CFG_NS16550_CLK == 12000000) && (gd->baudrate == 115200)) { @@ -149,15 +147,11 @@ static int calc_divisor (NS16550_t port) /* Compute divisor value. Normally, we should simply return: * CFG_NS16550_CLK) / MODE_X_DIV / gd->baudrate - * but we need to round that value by adding 0.5 (2/4). + * but we need to round that value by adding 0.5. * Rounding is especially important at high baud rates. */ - clk_divisor = (((4 * CFG_NS16550_CLK) / - (MODE_X_DIV * gd->baudrate)) + 2) / 4; - - debug("NS16550 clock divisor = %d\n", clk_divisor); - - return clk_divisor; + return (CFG_NS16550_CLK + (gd->baudrate * (MODE_X_DIV / 2))) / + (MODE_X_DIV * gd->baudrate); } #if !defined(CONFIG_SERIAL_MULTI) diff --git a/drivers/serial/usbtty.c b/drivers/serial/usbtty.c index cc2bdac..2bc5c3c 100644 --- a/drivers/serial/usbtty.c +++ b/drivers/serial/usbtty.c @@ -529,8 +529,8 @@ int drv_usbtty_init (void) } snlen = strlen(sn); if (snlen > sizeof(serial_number) - 1) { - printf ("Warning: serial number %s is too long (%d > %d)\n", - sn, snlen, sizeof(serial_number) - 1); + printf ("Warning: serial number %s is too long (%d > %lu)\n", + sn, snlen, (ulong)(sizeof(serial_number) - 1)); snlen = sizeof(serial_number) - 1; } memcpy (serial_number, sn, snlen); diff --git a/fs/jffs2/jffs2_1pass.c b/fs/jffs2/jffs2_1pass.c index 5c1d265..8a06777 100644 --- a/fs/jffs2/jffs2_1pass.c +++ b/fs/jffs2/jffs2_1pass.c @@ -1213,16 +1213,18 @@ jffs2_1pass_build_lists(struct part_info * part) } else if (node->nodetype == JFFS2_NODETYPE_CLEANMARKER) { if (node->totlen != sizeof(struct jffs2_unknown_node)) printf("OOPS Cleanmarker has bad size " - "%d != %u\n", node->totlen, + "%d != %zu\n", + node->totlen, sizeof(struct jffs2_unknown_node)); } else if (node->nodetype == JFFS2_NODETYPE_PADDING) { if (node->totlen < sizeof(struct jffs2_unknown_node)) printf("OOPS Padding has bad size " - "%d < %u\n", node->totlen, + "%d < %zu\n", + node->totlen, sizeof(struct jffs2_unknown_node)); } else { - printf("Unknown node type: %x len %d " - "offset 0x%x\n", node->nodetype, + printf("Unknown node type: %x len %d offset 0x%x\n", + node->nodetype, node->totlen, offset); } offset += ((node->totlen + 3) & ~3); diff --git a/fs/jffs2/jffs2_nand_1pass.c b/fs/jffs2/jffs2_nand_1pass.c index d95f551..3ce9c98 100644 --- a/fs/jffs2/jffs2_nand_1pass.c +++ b/fs/jffs2/jffs2_nand_1pass.c @@ -864,16 +864,18 @@ jffs2_1pass_build_lists(struct part_info * part) } else if (node->nodetype == JFFS2_NODETYPE_CLEANMARKER) { if (node->totlen != sizeof(struct jffs2_unknown_node)) printf("OOPS Cleanmarker has bad size " - "%d != %d\n", node->totlen, + "%d != %zu\n", + node->totlen, sizeof(struct jffs2_unknown_node)); } else if (node->nodetype == JFFS2_NODETYPE_PADDING) { if (node->totlen < sizeof(struct jffs2_unknown_node)) printf("OOPS Padding has bad size " - "%d < %d\n", node->totlen, + "%d < %zu\n", + node->totlen, sizeof(struct jffs2_unknown_node)); } else { - printf("Unknown node type: %x len %d " - "offset 0x%x\n", node->nodetype, + printf("Unknown node type: %x len %d offset 0x%x\n", + node->nodetype, node->totlen, offset); } offset += ((node->totlen + 3) & ~3); diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h index 6e134c3..b214844 100644 --- a/include/asm-ppc/processor.h +++ b/include/asm-ppc/processor.h @@ -426,6 +426,7 @@ /* e500 definitions */ #define SPRN_L1CFG0 0x203 /* L1 Cache Configuration Register 0 */ #define SPRN_L1CFG1 0x204 /* L1 Cache Configuration Register 1 */ +#define SPRN_L2CFG0 0x207 /* L2 Cache Configuration Register 0 */ #define SPRN_L1CSR0 0x3f2 /* L1 Data Cache Control and Status Register 0 */ #define L1CSR0_CPE 0x00010000 /* Data Cache Parity Enable */ #define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */ @@ -434,6 +435,21 @@ #define L1CSR1_CPE 0x00010000 /* Instruction Cache Parity Enable */ #define L1CSR1_ICFI 0x00000002 /* Instruction Cache Flash Invalidate */ #define L1CSR1_ICE 0x00000001 /* Instruction Cache Enable */ +#define SPRN_L1CSR2 0x25e /* L1 Data Cache Control and Status Register 2 */ +#define SPRN_L2CSR0 0x3f9 /* L2 Data Cache Control and Status Register 0 */ +#define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */ +#define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */ +#define L2CSR0_L2WP 0x1c000000 /* L2 I/D Way Partioning */ +#define L2CSR0_L2CM 0x03000000 /* L2 Cache Coherency Mode */ +#define L2CSR0_L2FI 0x00200000 /* L2 Cache Flash Invalidate */ +#define L2CSR0_L2IO 0x00100000 /* L2 Cache Instruction Only */ +#define L2CSR0_L2DO 0x00010000 /* L2 Cache Data Only */ +#define L2CSR0_L2REP 0x00003000 /* L2 Line Replacement Algo */ +#define L2CSR0_L2FL 0x00000800 /* L2 Cache Flush */ +#define L2CSR0_L2LFC 0x00000400 /* L2 Cache Lock Flash Clear */ +#define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */ +#define L2CSR0_L2LO 0x00000020 /* L2 Cache Lock Overflow */ +#define SPRN_L2CSR1 0x3fa /* L2 Data Cache Control and Status Register 1 */ #define SPRN_MMUCSR0 0x3f4 /* MMU control and status register 0 */ #define SPRN_MAS0 0x270 /* MMU Assist Register 0 */ @@ -624,8 +640,12 @@ #define MCSRR1 SPRN_MCSRR1 #define L1CSR0 SPRN_L1CSR0 #define L1CSR1 SPRN_L1CSR1 +#define L1CSR2 SPRN_L1CSR2 #define L1CFG0 SPRN_L1CFG0 #define L1CFG1 SPRN_L1CFG1 +#define L2CFG0 SPRN_L2CFG0 +#define L2CSR0 SPRN_L2CSR0 +#define L2CSR1 SPRN_L2CSR1 #define MCSR SPRN_MCSR #define MMUCSR0 SPRN_MMUCSR0 #define BUCSR SPRN_BUCSR @@ -889,6 +909,15 @@ /* Some parts define SVR[0:23] as the SOC version */ #define SVR_SOC_VER(svr) (((svr) >> 8) & 0xFFFFFF) /* SOC Version fields */ +/* whether MPC8xxxE (i.e. has SEC) */ +#if defined(CONFIG_MPC85xx) +#define IS_E_PROCESSOR(svr) (svr & 0x80000) +#else +#if defined(CONFIG_MPC83XX) +#define IS_E_PROCESSOR(spridr) (!(spridr & 0x00010000)) +#endif +#endif + /* * SVR_SOC_VER() Version Values */ diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 669f4d7c..091fd2e 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -148,8 +148,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); */ #define CFG_BOOT_BLOCK 0xfc000000 /* boot TLB */ -#define CFG_LBC_CACHE_BASE 0xf0000000 /* Localbus cacheable */ - #define CFG_FLASH_BASE 0xff800000 /* start of FLASH 8M */ #define CFG_BR0_PRELIM 0xff801001 @@ -158,10 +156,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_OR0_PRELIM 0xff806e65 #define CFG_OR1_PRELIM 0xff806e65 -#define CFG_FLASH_BANKS_LIST {0xfe800000,CFG_FLASH_BASE} +#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE} #define CFG_FLASH_QUIET_TEST -#define CFG_MAX_FLASH_BANKS 2 /* number of banks */ +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ #define CFG_MAX_FLASH_SECT 128 /* sectors per device */ #undef CFG_FLASH_CHECKSUM #define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ @@ -203,30 +201,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM 1 -#define CFG_INIT_L1_LOCK 1 -#define CFG_INIT_L1_ADDR 0xf4010000 /* Initial L1 address */ -#define CFG_INIT_L1_END 0x00004000 /* End of used area in RAM */ - -/* define to use L2SRAM as initial stack */ -#undef CONFIG_L2_INIT_RAM -#define CFG_INIT_L2_ADDR 0xf8fc0000 -#define CFG_INIT_L2_END 0x00040000 /* End of used area in RAM */ - -#ifdef CONFIG_L1_INIT_RAM -#define CFG_INIT_RAM_ADDR CFG_INIT_L1_ADDR -#define CFG_INIT_RAM_END CFG_INIT_L1_END -#else -#define CFG_INIT_RAM_ADDR CFG_INIT_L2_ADDR -#define CFG_INIT_RAM_END CFG_INIT_L2_END -#endif +#define CONFIG_L1_INIT_RAM +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0xf4010000 /* Initial L1 address */ +#define CFG_INIT_RAM_END 0x00004000 /* End of used area in RAM */ + #define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ +#define CFG_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ /* Serial Port - controlled on board with jumper J8 * open - index 2 @@ -314,6 +300,26 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #if defined(CONFIG_PCI) +/*PCIE video card used*/ +#define VIDEO_IO_OFFSET CFG_PCIE2_IO_PHYS + +/*PCI video card used*/ +/*#define VIDEO_IO_OFFSET CFG_PCI1_IO_PHYS*/ + +/* video */ +#define CONFIG_VIDEO + +#if defined(CONFIG_VIDEO) +#define CONFIG_BIOSEMU +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_ATI_RADEON_FB +#define CONFIG_VIDEO_LOGO +/*#define CONFIG_CONSOLE_CURSOR*/ +#define CFG_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET +#endif + #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ @@ -382,7 +388,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #if CFG_MONITOR_BASE > 0xfff80000 #define CFG_ENV_ADDR 0xfff80000 #else -#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x70000) #endif #define CFG_ENV_SIZE 0x2000 #define CFG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) */ diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index edf8525..27212162 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -538,29 +538,29 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "consoledev=ttyCPM\0" \ - "ramdiskaddr=1000000\0" \ - "ramdiskfile=your.ramdisk.u-boot\0" \ - "fdtaddr=400000\0" \ - "fdtfile=mpc8560ads.dtb\0" + "netdev=eth0\0" \ + "consoledev=ttyCPM\0" \ + "ramdiskaddr=1000000\0" \ + "ramdiskfile=your.ramdisk.u-boot\0" \ + "fdtaddr=400000\0" \ + "fdtfile=mpc8560ads.dtb\0" #define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" #define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 98ae34c..06899b1 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -140,11 +140,11 @@ #endif #endif -#define CFG_ID_EEPROM -#ifdef CFG_ID_EEPROM #define CONFIG_ID_EEPROM -#endif -#define ID_EEPROM_ADDR 0x57 +#define CFG_I2C_EEPROM_NXID +#define CFG_ID_EEPROM +#define CFG_I2C_EEPROM_ADDR 0x57 +#define CFG_I2C_EEPROM_ADDR_LEN 1 #define CFG_FLASH_BASE 0xf0000000 /* start of FLASH 128M */ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 455e154..cd35494 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -152,11 +152,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_DDR_CS5_BNDS 0x00000FFF /* Not done */ #endif -#define CFG_ID_EEPROM 1 -#ifdef CFG_ID_EEPROM #define CONFIG_ID_EEPROM -#endif -#define ID_EEPROM_ADDR 0x57 +#define CFG_I2C_EEPROM_NXID +#define CFG_ID_EEPROM +#define CFG_I2C_EEPROM_ADDR 0x57 +#define CFG_I2C_EEPROM_ADDR_LEN 1 /* * In MPC8641HPCN, allocate 16MB flash spaces at fe000000 and ff000000. diff --git a/include/configs/MVBC_P.h b/include/configs/MVBC_P.h new file mode 100644 index 0000000..04580b7 --- /dev/null +++ b/include/configs/MVBC_P.h @@ -0,0 +1,316 @@ +/* + * (C) Copyright 2003-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004-2008 + * Matrix-Vision GmbH, andre.schwarz@matrix-vision.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <version.h> + +#define CONFIG_MPC5xxx 1 +#define CONFIG_MPC5200 1 + +#define CFG_MPC5XXX_CLKIN 33000000 + +#define BOOTFLAG_COLD 0x01 +#define BOOTFLAG_WARM 0x02 + +#define CONFIG_MISC_INIT_R 1 + +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 +#endif + +#define CONFIG_PSC_CONSOLE 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200, 230400} + +#define CONFIG_PCI 1 +#define CONFIG_PCI_PNP 1 +#undef CONFIG_PCI_SCAN_SHOW +#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 + +#define CONFIG_PCI_MEM_BUS 0x40000000 +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x10000000 + +#define CONFIG_PCI_IO_BUS 0x50000000 +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0x01000000 + +#define CFG_XLB_PIPELINING 1 +#define CONFIG_HIGH_BATS 1 + +#define MV_CI mvBlueCOUGAR-P +#define MV_VCI mvBlueCOUGAR-P +#define MV_FPGA_DATA 0xff860000 +#define MV_FPGA_SIZE 0x0003c886 +#define MV_KERNEL_ADDR 0xffc00000 +#define MV_INITRD_ADDR 0xff900000 +#define MV_INITRD_LENGTH 0x00300000 +#define MV_SCRATCH_ADDR 0x00000000 +#define MV_SCRATCH_LENGTH MV_INITRD_LENGTH +#define MV_AUTOSCR_ADDR 0xff840000 +#define MV_AUTOSCR_ADDR2 0xff850000 +#define MV_DTB_ADDR 0xfffc0000 + +#define CONFIG_SHOW_BOOT_PROGRESS 1 + +#define MV_KERNEL_ADDR_RAM 0x00100000 +#define MV_DTB_ADDR_RAM 0x00600000 +#define MV_INITRD_ADDR_RAM 0x01000000 + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + +#define OF_CPU "PowerPC,5200@0" +#define OF_SOC "soc5200@f0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define MV_DTB_NAME mvbc-p.dtb +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 + +/* + * Supported commands + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_PCI +#define CONFIG_CMD_FPGA + +#undef CONFIG_WATCHDOG + +#define CONFIG_BOOTP_VENDOREX +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_NTPSERVER +#define CONFIG_BOOTP_RANDOM_DELAY +#define CONFIG_BOOTP_SEND_HOSTNAME + +/* + * Autoboot + */ +#define CONFIG_BOOTDELAY 2 +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_STOP_STR "s" +#define CONFIG_ZERO_BOOTDELAY_CHECK +#define CONFIG_RESET_TO_RETRY 1000 + +#define CONFIG_BOOTCOMMAND "if imi ${autoscr_addr}; \ + then autoscr ${autoscr_addr}; \ + else autoscr ${autoscr_addr2}; \ + fi;" + +#define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs" +#define CONFIG_ENV_OVERWRITE + +#define XMK_STR(x) #x +#define MK_STR(x) XMK_STR(x) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console_nr=0\0" \ + "console=yes\0" \ + "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" \ + "fpga=0\0" \ + "fpgadata=" MK_STR(MV_FPGA_DATA) "\0" \ + "fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0" \ + "autoscr_addr=" MK_STR(MV_AUTOSCR_ADDR) "\0" \ + "autoscr_addr2=" MK_STR(MV_AUTOSCR_ADDR2) "\0" \ + "mv_kernel_addr=" MK_STR(MV_KERNEL_ADDR) "\0" \ + "mv_kernel_addr_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0" \ + "mv_initrd_addr=" MK_STR(MV_INITRD_ADDR) "\0" \ + "mv_initrd_addr_ram=" MK_STR(MV_INITRD_ADDR_RAM) "\0" \ + "mv_initrd_length=" MK_STR(MV_INITRD_LENGTH) "\0" \ + "mv_dtb_addr=" MK_STR(MV_DTB_ADDR) "\0" \ + "mv_dtb_addr_ram=" MK_STR(MV_DTB_ADDR_RAM) "\0" \ + "dtb_name=" MK_STR(MV_DTB_NAME) "\0" \ + "mv_scratch_addr=" MK_STR(MV_SCRATCH_ADDR) "\0" \ + "mv_scratch_length=" MK_STR(MV_SCRATCH_LENGTH) "\0" \ + "mv_version=" U_BOOT_VERSION "\0" \ + "dhcp_client_id=" MK_STR(MV_CI) "\0" \ + "dhcp_vendor-class-identifier=" MK_STR(MV_VCI) "\0" \ + "netretry=no\0" \ + "use_static_ipaddr=no\0" \ + "static_ipaddr=192.168.90.10\0" \ + "static_netmask=255.255.255.0\0" \ + "static_gateway=0.0.0.0\0" \ + "initrd_name=uInitrd.mvbc-p-rfs\0" \ + "zcip=no\0" \ + "netboot=yes\0" \ + "mvtest=Ff\0" \ + "tried_bootfromflash=no\0" \ + "tried_bootfromnet=no\0" \ + "use_dhcp=yes\0" \ + "gev_start=yes\0" \ + "mvbcdma_debug=0\0" \ + "mvbcia_debug=0\0" \ + "propdev_debug=0\0" \ + "gevss_debug=0\0" \ + "watchdog=1\0" \ + "" + +#undef XMK_STR +#undef MK_STR + +/* + * IPB Bus clocking configuration. + */ +#define CFG_IPBCLK_EQUALS_XLBCLK +#define CFG_PCICLK_EQUALS_IPBCLK_DIV2 + +/* + * Flash configuration + */ +#undef CONFIG_FLASH_16BIT +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI_AMD_RESET 1 +#define CFG_FLASH_EMPTY_INFO + +#define CFG_FLASH_ERASE_TOUT 50000 +#define CFG_FLASH_WRITE_TOUT 1000 + +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 256 + +#define CFG_LOWBOOT +#define CFG_FLASH_BASE TEXT_BASE +#define CFG_FLASH_SIZE 0x00800000 + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH +#undef CFG_FLASH_PROTECTION + +#define CFG_ENV_ADDR 0xFFFE0000 +#define CFG_ENV_SIZE 0x10000 +#define CFG_ENV_SECT_SIZE 0x10000 +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR+CFG_ENV_SIZE) +#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE + +/* + * Memory map + */ +#define CFG_MBAR 0xF0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 + +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE + +#define CFG_GBL_DATA_SIZE 128 +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT 1 +#endif + +/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */ +#define CFG_MONITOR_LEN (512 << 10) +#define CFG_MALLOC_LEN (512 << 10) +#define CFG_BOOTMAPSZ (8 << 20) + +/* + * Ethernet configuration + */ +#define CONFIG_NET_MULTI +#define CONFIG_NET_RETRY_COUNT 5 + +#define CONFIG_E1000 +#define CONFIG_E1000_FALLBACK_MAC 0xb6b445ebfbc0 +#undef CONFIG_MPC5xxx_FEC +#undef CONFIG_PHY_ADDR +#define CONFIG_NETDEV eth0 + +/* + * Miscellaneous configurable options + */ +#define CFG_HUSH_PARSER +#define CONFIG_CMDLINE_EDITING +#define CFG_PROMPT_HUSH_PS2 "> " +#undef CFG_LONGHELP +#define CFG_PROMPT "=> " +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 +#else +#define CFG_CBSIZE 256 +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CFG_MAXARGS 16 +#define CFG_BARGSIZE CFG_CBSIZE + +#define CFG_MEMTEST_START 0x00800000 +#define CFG_MEMTEST_END 0x02f00000 + +#define CFG_HZ 1000 + +/* default load address */ +#define CFG_LOAD_ADDR 0x02000000 +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 0x00200000 + +/* + * Various low-level settings + */ +#define CFG_GPS_PORT_CONFIG 0x20000004 + +#define CFG_HID0_INIT (HID0_ICE | HID0_ICFI) +#define CFG_HID0_FINAL HID0_ICE + +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#define CFG_BOOTCS_CFG 0x00047800 +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE + +#define CFG_CS_BURST 0x000000f0 +#define CFG_CS_DEADCYCLE 0x33333303 + +#define CFG_RESET_ADDRESS 0x00000100 + +#undef FPGA_DEBUG +#undef CFG_FPGA_PROG_FEEDBACK +#define CONFIG_FPGA CFG_ALTERA_CYCLON2 +#define CONFIG_FPGA_ALTERA 1 +#define CONFIG_FPGA_CYCLON2 1 +#define CONFIG_FPGA_COUNT 1 + +#endif diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index b7ea1a9..a2f3650 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -126,7 +126,10 @@ #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTCOMMAND "bootm 40000" #define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200" -#define CONFIG_CMDLINE_TAG + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +/* #define CONFIG_INITRD_TAG 1 */ /* * Current memory map for Vibren supplied Linux images: @@ -208,10 +211,6 @@ /* "protect off" */ -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -/* #define CONFIG_INITRD_TAG 1 */ - #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h index 146eafe..6345cce 100644 --- a/include/configs/sbc8560.h +++ b/include/configs/sbc8560.h @@ -24,8 +24,8 @@ * MA 02111-1307 USA */ -/* mpc8560ads board configuration file */ -/* please refer to doc/README.mpc85xx for more info */ +/* sbc8560 board configuration file */ +/* please refer to doc/README.sbc8560 for more info */ /* make sure you change the MAC address and other network params first, * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file */ @@ -102,11 +102,11 @@ #define CFG_SDRAM_SIZE 512 /* DDR is 512MB */ #define SPD_EEPROM_ADDRESS 0x55 /* DDR DIMM */ -#undef CONFIG_DDR_ECC /* only for ECC DDR module */ -#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #if defined(CONFIG_MPC85xx_REV1) - #define CONFIG_DDR_DLL /* possible DLL fix needed */ + #define CONFIG_DDR_DLL /* possible DLL fix needed */ #endif #undef CONFIG_CLOCKS_IN_MHZ @@ -177,8 +177,8 @@ #define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ /* Serial Port */ -#undef CONFIG_CONS_ON_SCC /* define if console on SCC */ -#undef CONFIG_CONS_NONE /* define if console on something else */ +#undef CONFIG_CONS_ON_SCC /* define if console on SCC */ +#undef CONFIG_CONS_NONE /* define if console on something else */ #define CONFIG_CONS_INDEX 1 #undef CONFIG_SERIAL_SOFTWARE_FIFO @@ -200,6 +200,11 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 + /* * I2C */ @@ -215,16 +220,28 @@ #define CFG_PCI_MEM_PHYS 0xC0000000 #define CFG_PCI_MEM_SIZE 0x10000000 -#if defined(CONFIG_TSEC_ENET) /* TSEC Ethernet port */ +#ifdef CONFIG_TSEC_ENET + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif -# define CONFIG_NET_MULTI 1 -# define CONFIG_MII 1 /* MII PHY management */ -# define CONFIG_MPC85xx_TSEC1 -# define CONFIG_MPC85xx_TSEC1_NAME "TSEC0" -# define TSEC1_PHY_ADDR 25 -# define TSEC1_PHYIDX 0 -/* Options are: TSEC0 */ -# define CONFIG_ETHPRIME "TSEC0" +#ifndef CONFIG_MII +#define CONFIG_MII 1 /* MII PHY management */ +#endif +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" +#define TSEC1_PHY_ADDR 0x19 +#define TSEC2_PHY_ADDR 0x1a +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT + +/* Options are: TSEC[0-1] */ +#define CONFIG_ETHPRIME "TSEC0" #elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */ @@ -272,20 +289,20 @@ * FLASH and environment organization */ -#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ #if 0 -#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CFG_FLASH_PROTECTION /* use hardware protection */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION /* use hardware protection */ #endif -#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ #undef CFG_FLASH_CHECKSUM -#define CFG_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */ +#define CFG_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */ -#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ #if 0 /* XXX This doesn't work and I don't want to fix it */ @@ -315,9 +332,8 @@ #define CFG_ENV_SIZE 0x2000 #endif -#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=192.168.0.251:/tftpboot ip=192.168.0.105:192.168.0.251::255.255.255.0:sbc8560:eth0:off console=ttyS0,9600" +#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=dhcp console=ttyS0,9600" /*#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"*/ -#define CONFIG_BOOTCOMMAND "bootm 0xff800000 0xffa00000" #define CONFIG_BOOTDELAY 5 /* -1 disable autoboot */ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ @@ -389,25 +405,57 @@ #define BOOTFLAG_WARM 0x02 /* Software reboot */ #if defined(CONFIG_CMD_KGDB) - #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ - #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif -/*Note: change below for your network setting!!! */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) -# define CONFIG_ETHADDR 00:01:af:07:9b:8a -# define CONFIG_HAS_ETH1 -# define CONFIG_ETH1ADDR 00:01:af:07:9b:8b -# define CONFIG_HAS_ETH2 -# define CONFIG_ETH2ADDR 00:01:af:07:9b:8c +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 #endif -#define CONFIG_SERVERIP 192.168.0.131 -#define CONFIG_IPADDR 192.168.0.105 -#define CONFIG_GATEWAYIP 0.0.0.0 -#define CONFIG_NETMASK 255.255.255.0 +/* You can compile in a MAC address and your custom net settings by using + * the following syntax. Your board should be marked with the assigned + * MAC addresses directly on it. + * + * #define CONFIG_ETHADDR de:ad:be:ef:00:00 + * #define CONFIG_ETH1ADDR fa:ke:ad:dr:es:s! + * #define CONFIG_SERVERIP <server ip> + * #define CONFIG_IPADDR <board ip> + * #define CONFIG_GATEWAYIP <gateway ip> + * #define CONFIG_NETMASK <your netmask> + */ + #define CONFIG_HOSTNAME SBC8560 #define CONFIG_ROOTPATH /home/ppc -#define CONFIG_BOOTFILE pImage +#define CONFIG_BOOTFILE uImage + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=ramdisk.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=sbc8560.dtb\0" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND #endif /* __CONFIG_H */ diff --git a/include/fdt_support.h b/include/fdt_support.h index 890993f..a7c6326 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -56,6 +56,12 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd); static inline void fdt_fixup_dr_usb(void *blob, bd_t *bd) {} #endif /* CONFIG_HAS_FSL_DR_USB */ +#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC83XX) +void fdt_fixup_crypto_node(void *blob, int sec_rev); +#else +static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {} +#endif + #ifdef CONFIG_OF_BOARD_SETUP void ft_board_setup(void *blob, bd_t *bd); void ft_cpu_setup(void *blob, bd_t *bd); diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h index a4581a3..5d11ef0 100644 --- a/include/mpc5xxx.h +++ b/include/mpc5xxx.h @@ -198,6 +198,35 @@ #define GPIO_PSC3_9 0x04000000UL #define GPIO_PSC1_4 0x01000000UL +#define MPC5XXX_GPIO_SIMPLE_PSC6_3 0x20000000UL +#define MPC5XXX_GPIO_SIMPLE_PSC6_2 0x10000000UL +#define MPC5XXX_GPIO_SIMPLE_PSC3_7 0x00002000UL +#define MPC5XXX_GPIO_SIMPLE_PSC3_6 0x00001000UL +#define MPC5XXX_GPIO_SIMPLE_PSC3_3 0x00000800UL +#define MPC5XXX_GPIO_SIMPLE_PSC3_2 0x00000400UL +#define MPC5XXX_GPIO_SIMPLE_PSC3_1 0x00000200UL +#define MPC5XXX_GPIO_SIMPLE_PSC3_0 0x00000100UL +#define MPC5XXX_GPIO_SIMPLE_PSC2_3 0x00000080UL +#define MPC5XXX_GPIO_SIMPLE_PSC2_2 0x00000040UL +#define MPC5XXX_GPIO_SIMPLE_PSC2_1 0x00000020UL +#define MPC5XXX_GPIO_SIMPLE_PSC2_0 0x00000010UL +#define MPC5XXX_GPIO_SIMPLE_PSC1_3 0x00000008UL +#define MPC5XXX_GPIO_SIMPLE_PSC1_2 0x00000004UL +#define MPC5XXX_GPIO_SIMPLE_PSC1_1 0x00000002UL +#define MPC5XXX_GPIO_SIMPLE_PSC1_0 0x00000001UL + +#define MPC5XXX_GPIO_SINT_PSC3_5 0x02 +#define MPC5XXX_GPIO_SINT_PSC3_4 0x01 + +#define MPC5XXX_GPIO_WKUP_7 0x80 +#define MPC5XXX_GPIO_WKUP_6 0x40 +#define MPC5XXX_GPIO_WKUP_PSC6_1 0x20 +#define MPC5XXX_GPIO_WKUP_PSC6_0 0x10 +#define MPC5XXX_GPIO_WKUP_ETH17 0x08 +#define MPC5XXX_GPIO_WKUP_PSC3_9 0x04 +#define MPC5XXX_GPIO_WKUP_PSC2_4 0x02 +#define MPC5XXX_GPIO_WKUP_PSC1_4 0x01 + /* PCI registers */ #define MPC5XXX_PCI_CMD (MPC5XXX_PCI + 0x04) #define MPC5XXX_PCI_CFG (MPC5XXX_PCI + 0x0c) diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 939b825..897ecd6 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -61,21 +61,26 @@ #endif #define PARTID_NO_E(spridr) ((spridr & 0xFFFE0000) >> 16) -#define IS_E_PROCESSOR(spridr) (!(spridr & 0x00010000)) /* has SEC */ +#define SPR_FAMILY(spridr) ((spridr & 0xFFF00000) >> 20) +#define SPR_831X_FAMILY 0x80B #define SPR_8311 0x80B2 #define SPR_8313 0x80B0 #define SPR_8314 0x80B6 #define SPR_8315 0x80B4 +#define SPR_832X_FAMILY 0x806 #define SPR_8321 0x8066 #define SPR_8323 0x8062 +#define SPR_834X_FAMILY 0x803 #define SPR_8343 0x8036 #define SPR_8347_TBGA_ 0x8032 #define SPR_8347_PBGA_ 0x8034 #define SPR_8349 0x8030 +#define SPR_836X_FAMILY 0x804 #define SPR_8358_TBGA_ 0x804A #define SPR_8358_PBGA_ 0x804E #define SPR_8360 0x8048 +#define SPR_837X_FAMILY 0x80C #define SPR_8377 0x80C6 #define SPR_8378 0x80C4 #define SPR_8379 0x80C2 diff --git a/lib_generic/vsprintf.c b/lib_generic/vsprintf.c index 3db6c3f..7c9cfe1 100644 --- a/lib_generic/vsprintf.c +++ b/lib_generic/vsprintf.c @@ -262,7 +262,9 @@ int vsprintf(char *buf, const char *fmt, va_list args) /* get the conversion qualifier */ qualifier = -1; - if (*fmt == 'h' || *fmt == 'l' || *fmt == 'q') { + if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L' || + *fmt == 'Z' || *fmt == 'z' || *fmt == 't' || + *fmt == 'q' ) { qualifier = *fmt; if (qualifier == 'l' && *(fmt+1) == 'l') { qualifier = 'q'; @@ -355,9 +357,13 @@ int vsprintf(char *buf, const char *fmt, va_list args) num = va_arg(args, unsigned long long); else #endif - if (qualifier == 'l') + if (qualifier == 'l') { num = va_arg(args, unsigned long); - else if (qualifier == 'h') { + } else if (qualifier == 'Z' || qualifier == 'z') { + num = va_arg(args, size_t); + } else if (qualifier == 't') { + num = va_arg(args, ptrdiff_t); + } else if (qualifier == 'h') { num = (unsigned short) va_arg(args, int); if (flags & SIGN) num = (short) num; diff --git a/lib_m68k/board.c b/lib_m68k/board.c index d27c89c..a13ea26 100644 --- a/lib_m68k/board.c +++ b/lib_m68k/board.c @@ -347,11 +347,11 @@ board_init_f (ulong bootflag) addr_sp -= sizeof (bd_t); bd = (bd_t *) addr_sp; gd->bd = bd; - debug ("Reserving %d Bytes for Board Info at: %08lx\n", + debug ("Reserving %zu Bytes for Board Info at: %08lx\n", sizeof (bd_t), addr_sp); addr_sp -= sizeof (gd_t); id = (gd_t *) addr_sp; - debug ("Reserving %d Bytes for Global Data at: %08lx\n", + debug ("Reserving %zu Bytes for Global Data at: %08lx\n", sizeof (gd_t), addr_sp); /* Reserve memory for boot params. */ diff --git a/lib_mips/board.c b/lib_mips/board.c index 532550b..09b8b3b 100644 --- a/lib_mips/board.c +++ b/lib_mips/board.c @@ -242,12 +242,12 @@ void board_init_f(ulong bootflag) addr_sp -= sizeof(bd_t); bd = (bd_t *)addr_sp; gd->bd = bd; - debug ("Reserving %d Bytes for Board Info at: %08lx\n", + debug ("Reserving %zu Bytes for Board Info at: %08lx\n", sizeof(bd_t), addr_sp); addr_sp -= sizeof(gd_t); id = (gd_t *)addr_sp; - debug ("Reserving %d Bytes for Global Data at: %08lx\n", + debug ("Reserving %zu Bytes for Global Data at: %08lx\n", sizeof (gd_t), addr_sp); /* Reserve memory for boot params. diff --git a/lib_mips/bootm.c b/lib_mips/bootm.c index 8fe3782..5c46a5a 100644 --- a/lib_mips/bootm.c +++ b/lib_mips/bootm.c @@ -54,7 +54,7 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], char *commandline = getenv ("bootargs"); char env_buf[12]; int ret; - const char *cp; + char *cp; /* find kernel entry point */ if (images->legacy_hdr_valid) { @@ -89,15 +89,11 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], linux_params_init (UNCACHED_SDRAM (gd->bd->bi_boot_params), commandline); #ifdef CONFIG_MEMSIZE_IN_BYTES - sprintf (env_buf, "%lu", gd->ram_size); -#ifdef DEBUG - printf ("## Giving linux memsize in bytes, %lu\n", gd->ram_size); -#endif + sprintf (env_buf, "%lu", (ulong)gd->ram_size); + debug ("## Giving linux memsize in bytes, %lu\n", (ulong)gd->ram_size); #else - sprintf (env_buf, "%lu", gd->ram_size >> 20); -#ifdef DEBUG - printf ("## Giving linux memsize in MB, %lu\n", gd->ram_size >> 20); -#endif + sprintf (env_buf, "%lu", (ulong)(gd->ram_size >> 20)); + debug ("## Giving linux memsize in MB, %lu\n", (ulong)(gd->ram_size >> 20)); #endif /* CONFIG_MEMSIZE_IN_BYTES */ linux_env_set ("memsize", env_buf); diff --git a/lib_ppc/board.c b/lib_ppc/board.c index 1bc2f46..71a70db 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -524,11 +524,11 @@ void board_init_f (ulong bootflag) addr_sp -= sizeof (bd_t); bd = (bd_t *) addr_sp; gd->bd = bd; - debug ("Reserving %d Bytes for Board Info at: %08lx\n", + debug ("Reserving %zu Bytes for Board Info at: %08lx\n", sizeof (bd_t), addr_sp); addr_sp -= sizeof (gd_t); id = (gd_t *) addr_sp; - debug ("Reserving %d Bytes for Global Data at: %08lx\n", + debug ("Reserving %zu Bytes for Global Data at: %08lx\n", sizeof (gd_t), addr_sp); /* diff --git a/net/bootp.c b/net/bootp.c index 3c0614c..5121caa 100644 --- a/net/bootp.c +++ b/net/bootp.c @@ -313,7 +313,7 @@ BootpHandler(uchar * pkt, unsigned dest, unsigned src, unsigned len) Bootp_t *bp; char *s; - debug ("got BOOTP packet (src=%d, dst=%d, len=%d want_len=%d)\n", + debug ("got BOOTP packet (src=%d, dst=%d, len=%d want_len=%zu)\n", src, dest, len, sizeof (Bootp_t)); bp = (Bootp_t *)pkt; @@ -924,8 +924,6 @@ DhcpHandler(uchar * pkt, unsigned dest, unsigned src, unsigned len) if (NetReadLong((ulong*)&bp->bp_vend[0]) == htonl(BOOTP_VENDOR_MAGIC)) DhcpOptionsProcess((u8 *)&bp->bp_vend[4], bp); - BootpCopyNetParams(bp); /* Store net params from reply */ - NetSetTimeout(TIMEOUT * CFG_HZ, BootpTimeout); DhcpSendRequestPkt(bp); #ifdef CFG_BOOTFILE_PREFIX @@ -627,7 +627,7 @@ int eth_initialize(bd_t *bis) #if defined(CONFIG_MCF52x2) mcf52x2_miiphy_initialize(bis); #endif -#if defined(CONFIG_NETARM) +#if defined(CONFIG_DRIVER_NS7520_ETHERNET) ns7520_miiphy_initialize(bis); #endif #if defined(CONFIG_DRIVER_TI_EMAC) @@ -1390,7 +1390,7 @@ NetReceive(volatile uchar * inpkt, int len) puts ("Got IP\n"); #endif if (len < IP_HDR_SIZE) { - debug ("len bad %d < %ld\n", len, IP_HDR_SIZE); + debug ("len bad %d < %lu\n", len, (ulong)IP_HDR_SIZE); return; } if (len < ntohs(ip->ip_len)) { diff --git a/tools/.gitignore b/tools/.gitignore index df3500d..157b679 100644 --- a/tools/.gitignore +++ b/tools/.gitignore @@ -6,8 +6,11 @@ /img2srec /md5.c /mkimage +/mpc86x_clk +/ncp /sha1.c /ubsha1 +/inca-swap-bytes /image.c /fdt.c /fdt_ro.c diff --git a/tools/updater/cmd_flash.c b/tools/updater/cmd_flash.c index a976e0d..0f6f62b 100644 --- a/tools/updater/cmd_flash.c +++ b/tools/updater/cmd_flash.c @@ -187,7 +187,7 @@ int flash_sect_erase (ulong addr_first, ulong addr_last) erased = 0; - for (bank=0,info=&flash_info[0]; bank < CFG_MAX_FLASH_BANKS; ++bank, ++info) { + for (bank=0,info = &flash_info[0]; bank < CFG_MAX_FLASH_BANKS; ++bank, ++info) { ulong b_end; int sect; @@ -366,7 +366,7 @@ int flash_sect_protect (int p, ulong addr_first, ulong addr_last) protected = 0; - for (bank=0,info=&flash_info[0]; bank < CFG_MAX_FLASH_BANKS; ++bank, ++info) { + for (bank=0,info = &flash_info[0]; bank < CFG_MAX_FLASH_BANKS; ++bank, ++info) { ulong b_end; int sect; diff --git a/tools/updater/flash.c b/tools/updater/flash.c index 1ed77b1..a73159f 100644 --- a/tools/updater/flash.c +++ b/tools/updater/flash.c @@ -93,7 +93,7 @@ addr2info (ulong addr) flash_info_t *info; int i; - for (i=0, info=&flash_info[0]; i<CFG_MAX_FLASH_BANKS; ++i, ++info) { + for (i=0, info = &flash_info[0]; i<CFG_MAX_FLASH_BANKS; ++i, ++info) { if (info->flash_id != FLASH_UNKNOWN && addr >= info->start[0] && /* WARNING - The '- 1' is needed if the flash |