diff options
| -rw-r--r-- | arch/arm/cpu/armv7/mx6/clock.c | 14 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-mx6/clock.h | 1 | ||||
| -rw-r--r-- | doc/README.mxc_ocotp | 50 | ||||
| -rw-r--r-- | drivers/misc/Makefile | 1 | ||||
| -rw-r--r-- | drivers/misc/mxc_ocotp.c | 216 |
5 files changed, 282 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index 8cba4fd..3c0d908 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -37,6 +37,20 @@ enum pll_clocks { struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; +#ifdef CONFIG_MXC_OCOTP +void enable_ocotp_clk(unsigned char enable) +{ + u32 reg; + + reg = __raw_readl(&imx_ccm->CCGR2); + if (enable) + reg |= MXC_CCM_CCGR2_OCOTP_CTRL_MASK; + else + reg &= ~MXC_CCM_CCGR2_OCOTP_CTRL_MASK; + __raw_writel(reg, &imx_ccm->CCGR2); +} +#endif + void enable_usboh3_clk(unsigned char enable) { u32 reg; diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h index db377cc..cfd4edc 100644 --- a/arch/arm/include/asm/arch-mx6/clock.h +++ b/arch/arm/include/asm/arch-mx6/clock.h @@ -61,6 +61,7 @@ enum mxc_clock { u32 imx_get_uartclk(void); u32 imx_get_fecclk(void); unsigned int mxc_get_clock(enum mxc_clock clk); +void enable_ocotp_clk(unsigned char enable); void enable_usboh3_clk(unsigned char enable); int enable_sata_clock(void); int enable_i2c_clk(unsigned char enable, unsigned i2c_num); diff --git a/doc/README.mxc_ocotp b/doc/README.mxc_ocotp new file mode 100644 index 0000000..9a53311 --- /dev/null +++ b/doc/README.mxc_ocotp @@ -0,0 +1,50 @@ +Driver implementing the fuse API for Freescale's On-Chip OTP Controller (OCOTP) +on MXC + +This IP can be found on the following SoCs: + - i.MX6. + +Note that this IP is different from albeit similar to the IPs of the same name +that can be found on the following SoCs: + - i.MX23, + - i.MX28, + - i.MX50. + +The section numbers in this file refer to the i.MX6 Reference Manual. + +A fuse word contains 32 fuse bit slots, as explained in 46.2.1. + +A bank contains 8 fuse word slots, as explained in 46.2.1 and shown by the +memory map in 46.4. + +Some fuse bit or word slots may not have the corresponding fuses actually +implemented in the fusebox. + +See the README files of the SoCs using this driver in order to know the +conventions used by U-Boot to store some specific data in the fuses, e.g. MAC +addresses. + +Fuse operations: + + Read + Read operations are implemented as read accesses to the shadow registers, + using "Bankx Wordy" from the memory map in 46.4. This is explained in + detail by the first two paragraphs in 46.2.1.2. + + Sense + Sense operations are implemented as the direct fusebox read explained by + the steps in 46.2.1.2. + + Program + Program operations are implemented as explained by the steps in 46.2.1.3. + Following this operation, the shadow registers are not reloaded by the + hardware. + + Override + Override operations are implemented as write accesses to the shadow + registers, as explained by the first paragraph in 46.2.1.3. + +Configuration: + + CONFIG_MXC_OCOTP + Define this to enable the mxc_ocotp driver. diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index c6dadd4..5d869b4 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -31,6 +31,7 @@ COBJS-$(CONFIG_CBMEM_CONSOLE) += cbmem_console.o COBJS-$(CONFIG_FSL_IIM) += fsl_iim.o COBJS-$(CONFIG_GPIO_LED) += gpio_led.o COBJS-$(CONFIG_FSL_MC9SDZ60) += mc9sdz60.o +COBJS-$(CONFIG_MXC_OCOTP) += mxc_ocotp.o COBJS-$(CONFIG_NS87308) += ns87308.o COBJS-$(CONFIG_PDSP188x) += pdsp188x.o COBJS-$(CONFIG_STATUS_LED) += status_led.o diff --git a/drivers/misc/mxc_ocotp.c b/drivers/misc/mxc_ocotp.c new file mode 100644 index 0000000..0095b47 --- /dev/null +++ b/drivers/misc/mxc_ocotp.c @@ -0,0 +1,216 @@ +/* + * (C) Copyright 2013 ADVANSEE + * Benoît Thébaudeau <benoit.thebaudeau@advansee.com> + * + * Based on Dirk Behme's + * https://github.com/dirkbehme/u-boot-imx6/blob/28b17e9/drivers/misc/imx_otp.c, + * which is based on Freescale's + * http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/tree/drivers/misc/imx_otp.c?h=imx_v2009.08_1.1.0&id=9aa74e6, + * which is: + * Copyright (C) 2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <fuse.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> + +#define BO_CTRL_WR_UNLOCK 16 +#define BM_CTRL_WR_UNLOCK 0xffff0000 +#define BV_CTRL_WR_UNLOCK_KEY 0x3e77 +#define BM_CTRL_ERROR 0x00000200 +#define BM_CTRL_BUSY 0x00000100 +#define BO_CTRL_ADDR 0 +#define BM_CTRL_ADDR 0x0000007f + +#define BO_TIMING_STROBE_READ 16 +#define BM_TIMING_STROBE_READ 0x003f0000 +#define BV_TIMING_STROBE_READ_NS 37 +#define BO_TIMING_RELAX 12 +#define BM_TIMING_RELAX 0x0000f000 +#define BV_TIMING_RELAX_NS 17 +#define BO_TIMING_STROBE_PROG 0 +#define BM_TIMING_STROBE_PROG 0x00000fff +#define BV_TIMING_STROBE_PROG_US 10 + +#define BM_READ_CTRL_READ_FUSE 0x00000001 + +#define BF(value, field) (((value) << BO_##field) & BM_##field) + +#define WRITE_POSTAMBLE_US 2 + +static void wait_busy(struct ocotp_regs *regs, unsigned int delay_us) +{ + while (readl(®s->ctrl) & BM_CTRL_BUSY) + udelay(delay_us); +} + +static void clear_error(struct ocotp_regs *regs) +{ + writel(BM_CTRL_ERROR, ®s->ctrl_clr); +} + +static int prepare_access(struct ocotp_regs **regs, u32 bank, u32 word, + int assert, const char *caller) +{ + *regs = (struct ocotp_regs *)OCOTP_BASE_ADDR; + + if (bank >= ARRAY_SIZE((*regs)->bank) || + word >= ARRAY_SIZE((*regs)->bank[0].fuse_regs) >> 2 || + !assert) { + printf("mxc_ocotp %s(): Invalid argument\n", caller); + return -EINVAL; + } + + enable_ocotp_clk(1); + + wait_busy(*regs, 1); + clear_error(*regs); + + return 0; +} + +static int finish_access(struct ocotp_regs *regs, const char *caller) +{ + u32 err; + + err = !!(readl(®s->ctrl) & BM_CTRL_ERROR); + clear_error(regs); + + enable_ocotp_clk(0); + + if (err) { + printf("mxc_ocotp %s(): Access protect error\n", caller); + return -EIO; + } + + return 0; +} + +static int prepare_read(struct ocotp_regs **regs, u32 bank, u32 word, u32 *val, + const char *caller) +{ + return prepare_access(regs, bank, word, val != NULL, caller); +} + +int fuse_read(u32 bank, u32 word, u32 *val) +{ + struct ocotp_regs *regs; + int ret; + + ret = prepare_read(®s, bank, word, val, __func__); + if (ret) + return ret; + + *val = readl(®s->bank[bank].fuse_regs[word << 2]); + + return finish_access(regs, __func__); +} + +static void set_timing(struct ocotp_regs *regs) +{ + u32 ipg_clk; + u32 relax, strobe_read, strobe_prog; + u32 timing; + + ipg_clk = mxc_get_clock(MXC_IPG_CLK); + + relax = DIV_ROUND_UP(ipg_clk * BV_TIMING_RELAX_NS, 1000000000) - 1; + strobe_read = DIV_ROUND_UP(ipg_clk * BV_TIMING_STROBE_READ_NS, + 1000000000) + 2 * (relax + 1) - 1; + strobe_prog = DIV_ROUND(ipg_clk * BV_TIMING_STROBE_PROG_US, 1000000) + + 2 * (relax + 1) - 1; + + timing = BF(strobe_read, TIMING_STROBE_READ) | + BF(relax, TIMING_RELAX) | + BF(strobe_prog, TIMING_STROBE_PROG); + + clrsetbits_le32(®s->timing, BM_TIMING_STROBE_READ | BM_TIMING_RELAX | + BM_TIMING_STROBE_PROG, timing); +} + +static void setup_direct_access(struct ocotp_regs *regs, u32 bank, u32 word, + int write) +{ + u32 wr_unlock = write ? BV_CTRL_WR_UNLOCK_KEY : 0; + u32 addr = bank << 3 | word; + + set_timing(regs); + clrsetbits_le32(®s->ctrl, BM_CTRL_WR_UNLOCK | BM_CTRL_ADDR, + BF(wr_unlock, CTRL_WR_UNLOCK) | + BF(addr, CTRL_ADDR)); +} + +int fuse_sense(u32 bank, u32 word, u32 *val) +{ + struct ocotp_regs *regs; + int ret; + + ret = prepare_read(®s, bank, word, val, __func__); + if (ret) + return ret; + + setup_direct_access(regs, bank, word, false); + writel(BM_READ_CTRL_READ_FUSE, ®s->read_ctrl); + wait_busy(regs, 1); + *val = readl(®s->read_fuse_data); + + return finish_access(regs, __func__); +} + +static int prepare_write(struct ocotp_regs **regs, u32 bank, u32 word, + const char *caller) +{ + return prepare_access(regs, bank, word, true, caller); +} + +int fuse_prog(u32 bank, u32 word, u32 val) +{ + struct ocotp_regs *regs; + int ret; + + ret = prepare_write(®s, bank, word, __func__); + if (ret) + return ret; + + setup_direct_access(regs, bank, word, true); + writel(val, ®s->data); + wait_busy(regs, BV_TIMING_STROBE_PROG_US); + udelay(WRITE_POSTAMBLE_US); + + return finish_access(regs, __func__); +} + +int fuse_override(u32 bank, u32 word, u32 val) +{ + struct ocotp_regs *regs; + int ret; + + ret = prepare_write(®s, bank, word, __func__); + if (ret) + return ret; + + writel(val, ®s->bank[bank].fuse_regs[word << 2]); + + return finish_access(regs, __func__); +} |