summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--MAINTAINERS1
-rwxr-xr-xMAKEALL2
-rw-r--r--Makefile9
-rw-r--r--board/esd/vme8349/pci.c33
-rw-r--r--board/esd/vme8349/vme8349.c195
-rw-r--r--board/esd/vme8349/vme8349pin.h36
-rw-r--r--board/freescale/mpc8315erdb/config.mk8
-rw-r--r--board/freescale/mpc8315erdb/mpc8315erdb.c42
-rw-r--r--board/freescale/mpc8315erdb/sdram.c9
-rw-r--r--cpu/mpc83xx/cpu_init.c12
-rw-r--r--cpu/mpc83xx/spd_sdram.c9
-rw-r--r--doc/README.mpc8315erdb29
-rw-r--r--include/configs/MPC8315ERDB.h95
-rw-r--r--include/configs/kmeter1.h8
-rw-r--r--include/configs/vme8349.h98
15 files changed, 455 insertions, 131 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 9734b1d..48db504 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -36,6 +36,7 @@ Reinhard Arlt <reinhard.arlt@esd-electronics.com>
mecp5200 MPC5200
pf5200 MPC5200
+ caddy2 MPC8349
vme8349 MPC8349
CPCI750 PPC750FX/GX
diff --git a/MAKEALL b/MAKEALL
index ab1bb6f..a6d0f20 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -358,10 +358,12 @@ LIST_8260=" \
#########################################################################
LIST_83xx=" \
+ caddy2 \
kmeter1 \
MPC8313ERDB_33 \
MPC8313ERDB_NAND_66 \
MPC8315ERDB \
+ MPC8315ERDB_NAND \
MPC8323ERDB \
MPC832XEMDS \
MPC832XEMDS_ATM \
diff --git a/Makefile b/Makefile
index ed6156f..1abe64a 100644
--- a/Makefile
+++ b/Makefile
@@ -2261,8 +2261,12 @@ MPC8313ERDB_NAND_66_config: unconfig
echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
fi ;
+MPC8315ERDB_NAND_config \
MPC8315ERDB_config: unconfig
- @$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
+ @if [ "$(findstring _NAND_,$@)" ] ; then \
+ ln -sf mpc8313erdb nand_spl/board/freescale/mpc8315erdb ; \
+ fi ;
+ @$(MKCONFIG) -t $(@:_config=) MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
MPC8323ERDB_config: unconfig
@$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
@@ -2396,8 +2400,9 @@ SIMPC8313_SP_config: unconfig
TQM834x_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
+caddy2_config \
vme8349_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc83xx vme8349 esd
+ @$(MKCONFIG) -t $(@:_config=) vme8349 ppc mpc83xx vme8349 esd
#########################################################################
## MPC85xx Systems
diff --git a/board/esd/vme8349/pci.c b/board/esd/vme8349/pci.c
index d15203c..94fd32a 100644
--- a/board/esd/vme8349/pci.c
+++ b/board/esd/vme8349/pci.c
@@ -2,6 +2,9 @@
* pci.c -- esd VME8349 PCI board support.
* Copyright (c) 2006 Wind River Systems, Inc.
* Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
+ * Copyright (c) 2009 esd gmbh.
+ *
+ * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
*
* Based on MPC8349 PCI support but w/o PIB related code.
*
@@ -32,6 +35,7 @@
#include <pci.h>
#include <i2c.h>
#include <asm/fsl_i2c.h>
+#include "vme8349pin.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -93,17 +97,22 @@ pci_init_board(void)
udelay(2000);
/*
- * Assert/deassert PCI reset
+ * Assert/deassert VME reset
*/
- setbits_be32(&immr->gpio[0].dat, 0x00800000);
- setbits_be32(&immr->gpio[0].dir, 0x00800000);
- setbits_be32(&immr->gpio[1].dir, 0x08800000);
+ clrsetbits_be32(&immr->gpio[1].dat,
+ GPIO2_TSI_POWERUP_RESET_N | GPIO2_TSI_PLL_RESET_N,
+ GPIO2_VME_RESET_N | GPIO2_L_RESET_EN_N);
+ setbits_be32(&immr->gpio[1].dir, GPIO2_TSI_PLL_RESET_N |
+ GPIO2_TSI_POWERUP_RESET_N |
+ GPIO2_VME_RESET_N |
+ GPIO2_L_RESET_EN_N);
+ clrbits_be32(&immr->gpio[1].dir, GPIO2_V_SCON);
udelay(200);
- setbits_be32(&immr->gpio[1].dat, 0x08000000);
+ setbits_be32(&immr->gpio[1].dat, GPIO2_TSI_PLL_RESET_N);
udelay(200);
- setbits_be32(&immr->gpio[1].dat, 0x08800000);
+ setbits_be32(&immr->gpio[1].dat, GPIO2_TSI_POWERUP_RESET_N);
udelay(600000);
- clrbits_be32(&immr->gpio[1].dat, 0x00100000);
+ clrbits_be32(&immr->gpio[1].dat, GPIO2_L_RESET_EN_N);
/* Configure PCI Local Access Windows */
pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
@@ -114,6 +123,14 @@ pci_init_board(void)
udelay(2000);
- if (monarch == 0)
+ if (monarch == 0) {
mpc83xx_pci_init(1, reg, 0);
+ } else {
+ /*
+ * Release PCI RST Output signal
+ */
+ out_be32(&immr->pci_ctrl[0].gcr, 0);
+ udelay(2000);
+ out_be32(&immr->pci_ctrl[0].gcr, 1);
+ }
}
diff --git a/board/esd/vme8349/vme8349.c b/board/esd/vme8349/vme8349.c
index e3bc151..b0ebad7 100644
--- a/board/esd/vme8349/vme8349.c
+++ b/board/esd/vme8349/vme8349.c
@@ -38,63 +38,13 @@
#endif
#include <asm/io.h>
#include <asm/mmu.h>
+#include <spd.h>
+#include <spd_sdram.h>
+#include <i2c.h>
+#include <netdev.h>
void ddr_enable_ecc(unsigned int dram_size);
-int fixed_sdram(void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- u32 msize = 0;
- u32 ddr_size;
- u32 ddr_size_log2;
-
- msize = CONFIG_SYS_DDR_SIZE;
- for (ddr_size = msize << 20, ddr_size_log2 = 0;
- (ddr_size > 1);
- ddr_size = ddr_size>>1, ddr_size_log2++) {
- if (ddr_size & 1)
- return -1;
- }
-
- im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
- im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) &
- LAWAR_SIZE);
-
-#if (CONFIG_SYS_DDR_SIZE == 512)
- im->ddr.csbnds[0].csbnds = 0x0000001f;
-#else
-#warning Currently any DDR size other than 512MiB is not supported
-#endif
- im->ddr.cs_config[0] = CONFIG_SYS_DDR_CONFIG | 0x00330000;
-
- /* currently we use only one CS, so disable the other banks */
- im->ddr.csbnds[1].csbnds = 0x00000000;
- im->ddr.csbnds[2].csbnds = 0x00000000;
- im->ddr.csbnds[3].csbnds = 0x00000000;
- im->ddr.cs_config[1] = 0;
- im->ddr.cs_config[2] = 0;
- im->ddr.cs_config[3] = 0;
-
- im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
- im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
- im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
- im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
-
- im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
- im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
- im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
- im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
-
- im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
- sync();
- udelay(200);
-
- /* enable DDR controller */
- im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
-
- return msize;
-}
-
phys_size_t initdram(int board_type)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
@@ -103,10 +53,10 @@ phys_size_t initdram(int board_type)
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
return -1;
- /* DDR SDRAM - Main SODIMM */
+ /* DDR SDRAM - Main memory */
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
- msize = fixed_sdram();
+ msize = spd_sdram();
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
/*
@@ -124,17 +74,148 @@ phys_size_t initdram(int board_type)
int checkboard(void)
{
- puts("Board: esd VME8349\n");
+#ifdef VME_CADDY2
+ puts("Board: esd VME-CADDY/2\n");
+#else
+ puts("Board: esd VME-CPU/8349\n");
+#endif
return 0;
}
+#ifdef VME_CADDY2
+int board_eth_init(bd_t *bis)
+{
+ return pci_eth_init(bis);
+}
+#endif
+
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
}
#endif
+
+int misc_init_r()
+{
+ immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+
+ clrsetbits_be32(&im->lbus.lcrr, LBCR_LDIS, 0);
+
+ return 0;
+}
+
+/*
+ * Provide SPD values for spd_sdram(). Both boards (VME-CADDY/2
+ * and VME-CADDY/2) have different SDRAM configurations.
+ */
+#ifdef VME_CADDY2
+#define SMALL_RAM 0xff
+#define LARGE_RAM 0x00
+#else
+#define SMALL_RAM 0x00
+#define LARGE_RAM 0xff
+#endif
+
+#define SPD_VAL(a, b) (((a) & SMALL_RAM) | ((b) & LARGE_RAM))
+
+static spd_eeprom_t default_spd_eeprom = {
+ SPD_VAL(0x80, 0x80), /* 00 use 128 Bytes */
+ SPD_VAL(0x07, 0x07), /* 01 use 128 Bytes */
+ SPD_MEMTYPE_DDR2, /* 02 type is DDR2 */
+ SPD_VAL(0x0d, 0x0d), /* 03 rows: 13 */
+ SPD_VAL(0x09, 0x0a), /* 04 cols: 9 / 10 */
+ SPD_VAL(0x00, 0x00), /* 05 */
+ SPD_VAL(0x40, 0x40), /* 06 */
+ SPD_VAL(0x00, 0x00), /* 07 */
+ SPD_VAL(0x05, 0x05), /* 08 */
+ SPD_VAL(0x30, 0x30), /* 09 */
+ SPD_VAL(0x45, 0x45), /* 10 */
+ SPD_VAL(0x02, 0x02), /* 11 ecc used */
+ SPD_VAL(0x82, 0x82), /* 12 */
+ SPD_VAL(0x10, 0x10), /* 13 */
+ SPD_VAL(0x08, 0x08), /* 14 */
+ SPD_VAL(0x00, 0x00), /* 15 */
+ SPD_VAL(0x0c, 0x0c), /* 16 */
+ SPD_VAL(0x04, 0x08), /* 17 banks: 4 / 8 */
+ SPD_VAL(0x38, 0x38), /* 18 */
+ SPD_VAL(0x00, 0x00), /* 19 */
+ SPD_VAL(0x02, 0x02), /* 20 */
+ SPD_VAL(0x00, 0x00), /* 21 */
+ SPD_VAL(0x03, 0x03), /* 22 */
+ SPD_VAL(0x3d, 0x3d), /* 23 */
+ SPD_VAL(0x45, 0x45), /* 24 */
+ SPD_VAL(0x50, 0x50), /* 25 */
+ SPD_VAL(0x45, 0x45), /* 26 */
+ SPD_VAL(0x3c, 0x3c), /* 27 */
+ SPD_VAL(0x28, 0x28), /* 28 */
+ SPD_VAL(0x3c, 0x3c), /* 29 */
+ SPD_VAL(0x2d, 0x2d), /* 30 */
+ SPD_VAL(0x20, 0x80), /* 31 */
+ SPD_VAL(0x20, 0x20), /* 32 */
+ SPD_VAL(0x27, 0x27), /* 33 */
+ SPD_VAL(0x10, 0x10), /* 34 */
+ SPD_VAL(0x17, 0x17), /* 35 */
+ SPD_VAL(0x3c, 0x3c), /* 36 */
+ SPD_VAL(0x1e, 0x1e), /* 37 */
+ SPD_VAL(0x1e, 0x1e), /* 38 */
+ SPD_VAL(0x00, 0x00), /* 39 */
+ SPD_VAL(0x00, 0x06), /* 40 */
+ SPD_VAL(0x37, 0x37), /* 41 */
+ SPD_VAL(0x4b, 0x7f), /* 42 */
+ SPD_VAL(0x80, 0x80), /* 43 */
+ SPD_VAL(0x18, 0x18), /* 44 */
+ SPD_VAL(0x22, 0x22), /* 45 */
+ SPD_VAL(0x00, 0x00), /* 46 */
+ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
+ SPD_VAL(0x10, 0x10), /* 62 */
+ SPD_VAL(0x7e, 0x1d), /* 63 */
+ { 'e', 's', 'd', '-', 'g', 'm', 'b', 'h' },
+ SPD_VAL(0x00, 0x00), /* 72 */
+#ifdef VME_CADDY2
+ { "vme-caddy/2 ram " }
+#else
+ { "vme-cpu/2 ram " }
+#endif
+};
+
+int vme8349_read_spd(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+ int old_bus = I2C_GET_BUS();
+ unsigned int l, sum;
+ int valid = 0;
+
+ I2C_SET_BUS(0);
+
+ if (i2c_read(chip, addr, alen, buffer, len) == 0)
+ if (memcmp(&buffer[64], &default_spd_eeprom.mid[0], 8) == 0) {
+ sum = 0;
+ for (l = 0; l < 63; l++)
+ sum = (sum + buffer[l]) & 0xff;
+ if (sum == buffer[63])
+ valid = 1;
+ else
+ printf("Invalid checksum in EEPROM %02x %02x\n",
+ sum, buffer[63]);
+ }
+
+ if (valid == 0) {
+ memcpy(buffer, (void *)&default_spd_eeprom, len);
+ sum = 0;
+ for (l = 0; l < 63; l++)
+ sum = (sum + buffer[l]) & 0xff;
+ if (sum != buffer[63])
+ printf("Invalid checksum in FLASH %02x %02x\n",
+ sum, buffer[63]);
+ buffer[63] = sum;
+ }
+
+ I2C_SET_BUS(old_bus);
+
+ return 0;
+}
diff --git a/board/esd/vme8349/vme8349pin.h b/board/esd/vme8349/vme8349pin.h
new file mode 100644
index 0000000..d1fd1b2
--- /dev/null
+++ b/board/esd/vme8349/vme8349pin.h
@@ -0,0 +1,36 @@
+/*
+ * vme8349pin.h -- esd VME8349 MPC8349 I/O pin definition.
+ * Copyright (c) 2009 esd gmbh.
+ *
+ * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __VME8349PIN_H__
+#define __VME8349PIN_H__
+
+#define GPIO2_V_SCON 0x80000000 /* In: from tsi148 1: is syscon */
+#define GPIO2_VME_RESET_N 0x20000000 /* Out: to tsi148 */
+#define GPIO2_TSI_PLL_RESET_N 0x08000000 /* Out: to tsi148 */
+#define GPIO2_TSI_POWERUP_RESET_N 0x00800000 /* Out: to tsi148 */
+#define GPIO2_L_RESET_EN_N 0x00100000 /* Out: 0:vme can assert cpu lrst*/
+
+#endif /* of ifndef __VME8349PIN_H__ */
diff --git a/board/freescale/mpc8315erdb/config.mk b/board/freescale/mpc8315erdb/config.mk
index f768264..bf972fb 100644
--- a/board/freescale/mpc8315erdb/config.mk
+++ b/board/freescale/mpc8315erdb/config.mk
@@ -1 +1,9 @@
+ifndef NAND_SPL
+ifeq ($(CONFIG_MK_NAND), y)
+TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
+endif
+endif
+
+ifndef TEXT_BASE
TEXT_BASE = 0xFE000000
+endif
diff --git a/board/freescale/mpc8315erdb/mpc8315erdb.c b/board/freescale/mpc8315erdb/mpc8315erdb.c
index dea4d6f..d5e71dc 100644
--- a/board/freescale/mpc8315erdb/mpc8315erdb.c
+++ b/board/freescale/mpc8315erdb/mpc8315erdb.c
@@ -32,6 +32,8 @@
#include <mpc83xx.h>
#include <netdev.h>
#include <asm/io.h>
+#include <ns16550.h>
+#include <nand.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -45,6 +47,8 @@ int board_early_init_f(void)
return 0;
}
+#ifndef CONFIG_NAND_SPL
+
static u8 read_board_info(void)
{
u8 val8;
@@ -220,3 +224,41 @@ int board_eth_init(bd_t *bis)
cpu_eth_init(bis); /* Initialize TSECs first */
return pci_eth_init(bis);
}
+
+#else /* CONFIG_NAND_SPL */
+
+int checkboard(void)
+{
+ puts("Board: Freescale MPC8315ERDB\n");
+ return 0;
+}
+
+void board_init_f(ulong bootflag)
+{
+ board_early_init_f();
+ NS16550_init((NS16550_t)(CONFIG_SYS_IMMR + 0x4500),
+ CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
+ puts("NAND boot... ");
+ init_timebase();
+ initdram(0);
+ relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000, (gd_t *)gd,
+ CONFIG_SYS_NAND_U_BOOT_RELOC);
+}
+
+void board_init_r(gd_t *gd, ulong dest_addr)
+{
+ nand_boot();
+}
+
+void putc(char c)
+{
+ if (gd->flags & GD_FLG_SILENT)
+ return;
+
+ if (c == '\n')
+ NS16550_putc((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), '\r');
+
+ NS16550_putc((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), c);
+}
+
+#endif /* CONFIG_NAND_SPL */
diff --git a/board/freescale/mpc8315erdb/sdram.c b/board/freescale/mpc8315erdb/sdram.c
index ead7b1e..fe8ec1e 100644
--- a/board/freescale/mpc8315erdb/sdram.c
+++ b/board/freescale/mpc8315erdb/sdram.c
@@ -54,6 +54,7 @@ static void resume_from_sleep(void)
* This is useful for faster booting in configs where the RAM is unlikely
* to be changed, or for things like NAND booting where space is tight.
*/
+#ifndef CONFIG_SYS_RAMBOOT
static long fixed_sdram(void)
{
volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
@@ -68,7 +69,7 @@ static long fixed_sdram(void)
* Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg],
* or the DDR2 controller may fail to initialize correctly.
*/
- udelay(50000);
+ __udelay(50000);
im->ddr.csbnds[0].csbnds = (msize - 1) >> 24;
im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
@@ -100,6 +101,12 @@ static long fixed_sdram(void)
return msize;
}
+#else
+static long fixed_sdram(void)
+{
+ return CONFIG_SYS_DDR_SIZE * 1024 * 1024;
+}
+#endif /* CONFIG_SYS_RAMBOOT */
phys_size_t initdram(int board_type)
{
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index 0d6a5fe..75b4522 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -70,6 +70,12 @@ void cpu_init_f (volatile immap_t * im)
#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */
(ACR_RPTCNT << ACR_RPTCNT_SHIFT) |
#endif
+#ifdef CONFIG_SYS_ACR_APARK /* Arbiter address parking mode */
+ (ACR_APARK << ACR_APARK_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_ACR_PARKM /* Arbiter parking master */
+ (ACR_PARKM << ACR_PARKM_SHIFT) |
+#endif
0;
__be32 acr_val =
#ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */
@@ -78,6 +84,12 @@ void cpu_init_f (volatile immap_t * im)
#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */
(CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT) |
#endif
+#ifdef CONFIG_SYS_ACR_APARK /* Arbiter address parking mode */
+ (CONFIG_SYS_ACR_APARK << ACR_APARK_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_ACR_PARKM /* Arbiter parking master */
+ (CONFIG_SYS_ACR_PARKM << ACR_PARKM_SHIFT) |
+#endif
0;
__be32 spcr_mask =
#ifdef CONFIG_SYS_SPCR_OPT /* Optimize transactions between CSB and other dev */
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index 0f61180..44aaa9a 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -29,6 +29,7 @@
#include <common.h>
#include <asm/processor.h>
+#include <asm/io.h>
#include <i2c.h>
#include <spd.h>
#include <asm/mmu.h>
@@ -150,6 +151,14 @@ long int spd_sdram()
unsigned int ddrc_ecc_enable;
unsigned int pvr = get_pvr();
+ /*
+ * First disable the memory controller (could be enabled
+ * by the debugger)
+ */
+ clrsetbits_be32(&ddr->sdram_cfg, SDRAM_CFG_MEM_EN, 0);
+ sync();
+ isync();
+
/* Read SPD parameters with I2C */
CONFIG_SYS_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
#ifdef SPD_DEBUG
diff --git a/doc/README.mpc8315erdb b/doc/README.mpc8315erdb
index 7d476d0..b32132d 100644
--- a/doc/README.mpc8315erdb
+++ b/doc/README.mpc8315erdb
@@ -15,6 +15,18 @@ Freescale MPC8315ERDB Board
4321 4321
(where the '*' indicates the position of the tab of the switch.)
+ To boot the image at the beginning of NAND flash, use these
+ DIP switch settings for S3 S4:
+
+ +------+ +------+
+ | * | | *** |
+ | *** | | * |
+ +------+ ON +------+ ON
+ 4321 4321
+ (where the '*' indicates the position of the tab of the switch.)
+
+ When booting from NAND, use u-boot-nand.bin, not u-boot.bin.
+
2. Memory Map
The memory map looks like this:
@@ -26,6 +38,9 @@ Freescale MPC8315ERDB Board
0xe060_0000 0xe060_7fff NAND FLASH (CS1) 32K
0xfe00_0000 0xfe7f_ffff NOR FLASH (CS0) 8M
+ When booting from NAND, NAND flash is CS0 and NOR flash
+ is CS1.
+
3. Definitions
3.1 Explanation of NEW definitions in:
@@ -43,13 +58,15 @@ Freescale MPC8315ERDB Board
export CROSS_COMPILE=your-cross-compiler-prefix-
make distclean
- make MPC8315ERDB_config
+ make MPC8315ERDB_config (or MPC8315ERDB_NAND_config for u-boot-nand.bin)
make all
5. Downloading and Flashing Images
5.1 Reflash U-boot Image using U-boot
+ NOR flash:
+
tftp 40000 u-boot.bin
protect off all
erase fe000000 fe1fffff
@@ -60,6 +77,15 @@ Freescale MPC8315ERDB Board
You have to supply the correct byte count with 'xxxx'
from the TFTP result log.
+ NAND flash:
+
+ =>tftpboot $loadaddr <filename>
+ =>nand erase 0 0x80000
+ =>nand write $loadaddr 0 0x80000
+
+ ...where 0x80000 is the filesize rounded up to
+ the next 0x20000 increment.
+
5.2 Downloading and Booting Linux Kernel
Ensure that all networking-related environment variables are set
@@ -76,5 +102,4 @@ Freescale MPC8315ERDB Board
6 Notes
- Booting from NAND flash is not yet supported.
The console baudrate for MPC8315ERDB is 115200bps.
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index 79376b3..cfed4ca 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -25,6 +25,11 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#ifdef CONFIG_MK_NAND
+#define CONFIG_NAND_U_BOOT 1
+#define CONFIG_RAMBOOT_TEXT_BASE 0x00100000
+#endif
+
/*
* High Level Configuration Options
*/
@@ -51,20 +56,29 @@
HRCWL_SVCOD_DIV_2 |\
HRCWL_CSB_TO_CLKIN_2X1 |\
HRCWL_CORE_TO_CSB_3X1)
-#define CONFIG_SYS_HRCW_HIGH (\
+#define CONFIG_SYS_HRCW_HIGH_BASE (\
HRCWH_PCI_HOST |\
HRCWH_PCI1_ARBITER_ENABLE |\
HRCWH_CORE_ENABLE |\
- HRCWH_FROM_0X00000100 |\
HRCWH_BOOTSEQ_DISABLE |\
HRCWH_SW_WATCHDOG_DISABLE |\
- HRCWH_ROM_LOC_LOCAL_16BIT |\
- HRCWH_RL_EXT_LEGACY |\
HRCWH_TSEC1M_IN_RGMII |\
HRCWH_TSEC2M_IN_RGMII |\
HRCWH_BIG_ENDIAN |\
HRCWH_LALE_NORMAL)
+#ifdef CONFIG_NAND_SPL
+#define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\
+ HRCWH_FROM_0XFFF00100 |\
+ HRCWH_ROM_LOC_NAND_SP_8BIT |\
+ HRCWH_RL_EXT_NAND)
+#else
+#define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\
+ HRCWH_FROM_0X00000100 |\
+ HRCWH_ROM_LOC_LOCAL_16BIT |\
+ HRCWH_RL_EXT_LEGACY)
+#endif
+
/*
* System IO Config
*/
@@ -79,6 +93,10 @@
*/
#define CONFIG_SYS_IMMR 0xE0000000
+#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CONFIG_DEFAULT_IMMR CONFIG_SYS_IMMR
+#endif
+
/*
* Arbiter Setup
*/
@@ -161,12 +179,6 @@
*/
#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#else
-#undef CONFIG_SYS_RAMBOOT
-#endif
-
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
@@ -200,10 +212,10 @@
#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE /* Window base at flash base */
#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000016 /* 8MB window size */
-#define CONFIG_SYS_BR0_PRELIM ( CONFIG_SYS_FLASH_BASE /* Flash Base address */ \
+#define CONFIG_SYS_NOR_BR_PRELIM (CONFIG_SYS_FLASH_BASE \
| (2 << BR_PS_SHIFT) /* 16 bit port size */ \
| BR_V ) /* valid */
-#define CONFIG_SYS_OR0_PRELIM ( (~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \
+#define CONFIG_SYS_NOR_OR_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \
| OR_UPM_XAM \
| OR_GPCM_CSNT \
| OR_GPCM_ACS_DIV2 \
@@ -223,18 +235,31 @@
/*
* NAND Flash on the Local Bus
*/
-#define CONFIG_SYS_NAND_BASE 0xE0600000 /* 0xE0600000 */
+
+#ifdef CONFIG_NAND_SPL
+#define CONFIG_SYS_NAND_BASE 0xFFF00000
+#else
+#define CONFIG_SYS_NAND_BASE 0xE0600000
+#endif
+
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_MTD_NAND_VERIFY_WRITE 1
#define CONFIG_CMD_NAND 1
#define CONFIG_NAND_FSL_ELBC 1
+#define CONFIG_SYS_NAND_BLOCK_SIZE 16384
+
+#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10)
+#define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000
+#define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 16384
+#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
-#define CONFIG_SYS_BR1_PRELIM ( CONFIG_SYS_NAND_BASE \
+#define CONFIG_SYS_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE \
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
| BR_PS_8 /* Port Size = 8 bit */ \
| BR_MS_FCM /* MSEL = FCM */ \
| BR_V ) /* valid */
-#define CONFIG_SYS_OR1_PRELIM ( 0xFFFF8000 /* length 32K */ \
+#define CONFIG_SYS_NAND_OR_PRELIM (0xFFFF8000 /* length 32K */ \
| OR_FCM_CSCT \
| OR_FCM_CST \
| OR_FCM_CHT \
@@ -243,9 +268,31 @@
| OR_FCM_EHTR )
/* 0xFFFF8396 */
+#ifdef CONFIG_NAND_U_BOOT
+#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM
+#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM
+#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NOR_BR_PRELIM
+#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NOR_OR_PRELIM
+#else
+#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM
+#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM
+#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM
+#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM
+#endif
+
#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE
#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E /* 32KB */
+#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM
+#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM
+
+#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE && \
+ !defined(CONFIG_NAND_SPL)
+#define CONFIG_SYS_RAMBOOT
+#else
+#undef CONFIG_SYS_RAMBOOT
+#endif
+
/*
* Serial Port
*/
@@ -254,7 +301,7 @@
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
+#define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 2)
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
@@ -408,7 +455,16 @@
/*
* Environment
*/
-#ifndef CONFIG_SYS_RAMBOOT
+#if defined(CONFIG_NAND_U_BOOT)
+ #define CONFIG_ENV_IS_IN_NAND 1
+ #define CONFIG_ENV_OFFSET (512 * 1024)
+ #define CONFIG_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
+ #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
+ #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
+ #define CONFIG_ENV_RANGE (CONFIG_ENV_SECT_SIZE * 4)
+ #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
+ CONFIG_ENV_RANGE)
+#elif !defined(CONFIG_SYS_RAMBOOT)
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */
@@ -442,7 +498,7 @@
#define CONFIG_CMD_DATE
#define CONFIG_CMD_PCI
-#if defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT)
#undef CONFIG_CMD_SAVEENV
#undef CONFIG_CMD_LOADS
#endif
@@ -504,7 +560,8 @@
/* FLASH: icache cacheable, but dcache-inhibit and guarded */
#define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE | BATU_BL_8M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE | BATU_BL_32M | \
+ BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h
index bec08da..b023326 100644
--- a/include/configs/kmeter1.h
+++ b/include/configs/kmeter1.h
@@ -72,6 +72,14 @@
#define CONFIG_SYS_IMMR 0xE0000000
/*
+ * Bus Arbitration Configuration Register (ACR)
+ */
+#define CONFIG_SYS_ACR_PIPE_DEP 3 /* pipeline depth 4 transactions */
+#define CONFIG_SYS_ACR_RPTCNT 3 /* 4 consecutive transactions */
+#define CONFIG_SYS_ACR_APARK 0 /* park bus to master (below) */
+#define CONFIG_SYS_ACR_PARKM 3 /* parking master = QuiccEngine */
+
+/*
* DDR Setup
*/
#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */
diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h
index f9db73b..dbc15b2 100644
--- a/include/configs/vme8349.h
+++ b/include/configs/vme8349.h
@@ -35,6 +35,13 @@
#define __CONFIG_H
/*
+ * Top level Makefile configuration choices
+ */
+#ifdef CONFIG_MK_caddy2
+#define VME_CADDY2
+#endif
+
+/*
* High Level Configuration Options
*/
#define CONFIG_E300 1 /* E300 Family */
@@ -43,6 +50,8 @@
#define CONFIG_MPC8349 1 /* MPC8349 specific */
#define CONFIG_VME8349 1 /* ESD VME8349 board specific */
+#define CONFIG_MISC_INIT_R
+
#define CONFIG_PCI
/* Don't enable PCI2 on vme834x - it doesn't exist physically. */
#undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */
@@ -75,7 +84,9 @@
*/
#define CONFIG_DDR_ECC /* only for ECC DDR module */
#define CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */
-#undef CONFIG_SPD_EEPROM /* dont use SPD EEPROM for DDR setup*/
+#define CONFIG_SPD_EEPROM
+#define SPD_EEPROM_ADDRESS 0x54
+#define CONFIG_SYS_READ_SPD vme8349_read_spd
#define CONFIG_SYS_83XX_DDR_USES_CS0 /* esd; Fsl board uses CS2/CS3 */
/*
@@ -96,54 +107,40 @@
#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \
DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075)
#define CONFIG_DDR_2T_TIMING
-
-/*
- * Manually set up DDR parameters
- */
-#define CONFIG_SYS_DDR_SIZE 512 /* MB */
-
-#if (CONFIG_SYS_DDR_SIZE == 512)
-#define CONFIG_SYS_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | \
- CSCONFIG_COL_BIT_10 | \
- CSCONFIG_BANK_BIT_3)
-#endif
-
-/*
- * Manually set up DDR parameters
- */
-#define CONFIG_SYS_DDR_TIMING_0 0x00220802
-#define CONFIG_SYS_DDR_TIMING_1 0x39377322
-#define CONFIG_SYS_DDR_TIMING_2 0x2f9848ca /* P9-45, tuning? */
-#define CONFIG_SYS_DDR_TIMING_3 0x00000000
-#define CONFIG_SYS_DDR_CONTROL 0xc2000000 /* unbuf,no DYN_PWR */
-#define CONFIG_SYS_DDR_MODE 0x07940242
-#define CONFIG_SYS_DDR_MODE2 0x00000000
-/* autocharge,no open page */
-#define CONFIG_SYS_DDR_INTERVAL 0x04060100
-#define CONFIG_SYS_DDR_SDRAM_CFG 0x63000000
-#define CONFIG_SYS_DDR_SDRAM_CFG2 0x04061000
+#define CONFIG_SYS_DDRCDR 0x80080001
/*
* FLASH on the Local Bus
*/
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
-#define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH */
-#define CONFIG_SYS_FLASH_SIZE 128 /* flash size in MB */
-/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
+#ifdef VME_CADDY2
+#define CONFIG_SYS_FLASH_BASE 0xffc00000 /* start of FLASH */
+#define CONFIG_SYS_FLASH_SIZE 4 /* flash size in MB */
+#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \
+ (2 << BR_PS_SHIFT) | /* 32bit */ \
+ BR_V) /* valid */
+#define CONFIG_SYS_OR0_PRELIM 0xffc06ff7 /* 4 MB flash size */
+#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000015 /* 4 MB window size */
+#else
+#define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH */
+#define CONFIG_SYS_FLASH_SIZE 128 /* flash size in MB */
#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \
(2 << BR_PS_SHIFT) | /* 32bit */ \
BR_V) /* valid */
-#define CONFIG_SYS_OR0_PRELIM 0xF8006FF7 /* 128 MB flash size */
+#define CONFIG_SYS_OR0_PRELIM 0xf8006ff7 /* 128 MB flash size */
#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000001A /* 128 MB window size */
+#define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000001a /* 128 MB window size */
+#endif
+/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
#define CONFIG_SYS_BR1_PRELIM (0xf0000000 | 0x00001801)
-#define CONFIG_SYS_OR1_PRELIM (0xffff8000 | 0x00000200)
+#define CONFIG_SYS_OR1_PRELIM (0xfffc0008 | 0x00000200)
#define CONFIG_SYS_LBLAWBAR1_PRELIM 0xf0000000
-#define CONFIG_SYS_LBLAWAR1_PRELIM (0x80000000 | 0x0000000e)
+#define CONFIG_SYS_LBLAWAR1_PRELIM (0x80000000 | 0x00000011)
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device*/
@@ -157,7 +154,7 @@
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
#else
-#undef CONFIG_SYS_RAMBOOT
+#undef CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_SYS_INIT_RAM_LOCK 1
@@ -174,11 +171,10 @@
/*
* Local Bus LCRR and LBCR regs
- * LCRR: DLL bypass, Clock divider is 4
+ * LCRR: no DLL bypass, Clock divider is 4
* External Local Bus rate is
* CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
*/
-#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
#define CONFIG_SYS_LBC_LBCR 0x00000000
@@ -268,10 +264,10 @@
#undef PCI_ONE_PCI1
#endif
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-
+#ifndef VME_CADDY2
#define CONFIG_NET_MULTI
+#endif
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
@@ -282,19 +278,26 @@
#define PCI_IDSEL_NUMBER 0xFIXME
#endif
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
+
#endif /* CONFIG_PCI */
/*
* TSEC configuration
*/
+#ifdef VME_CADDY2
+#define CONFIG_E1000
+#else
#define CONFIG_TSEC_ENET /* TSEC ethernet support */
+#endif
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI
#endif
-#define CONFIG_GMII /* MII PHY management */
+#define CONFIG_GMII /* MII PHY management */
#define CONFIG_TSEC1
#define CONFIG_TSEC1_NAME "TSEC0"
#define CONFIG_TSEC2
@@ -312,6 +315,12 @@
#endif /* CONFIG_TSEC_ENET */
+#if defined(CONFIG_E1000)
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI
+#endif
+#endif
+
/*
* Environment
*/
@@ -560,7 +569,7 @@
#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
#undef CONFIG_BOOTARGS /* boot command will set bootargs */
-#define CONFIG_BAUDRATE 115200
+#define CONFIG_BAUDRATE 9600
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
@@ -605,4 +614,9 @@
#define CONFIG_BOOTCOMMAND "run flash_self"
+#ifndef __ASSEMBLY__
+int vme8349_read_spd(unsigned char chip, unsigned int addr, int alen,
+ unsigned char *buffer, int len);
+#endif
+
#endif /* __CONFIG_H */
generated by cgit v1.1 at 2024-11-11 05:51:37 +0000