diff options
| -rw-r--r-- | include/asm-arm/arch-pxa/pxa-regs.h | 2674 |
1 files changed, 553 insertions, 2121 deletions
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 3e59f89..41d37d7 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -5,15 +5,16 @@ * Created: Jun 15, 2001 * Copyright: MontaVista Software Inc. * - * Copyright (C) 2004, Intel Corporation. - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. + * + * - 2003/01/20: Robert Schwebel <r.schwebel@pengutronix.de + * Original file taken from linux-2.4.19-rmk4-pxa1. Added some definitions. + * Added include for hardware.h (for __REG definition) */ - -#ifndef __PXA_REGS_H -#define __PXA_REGS_H +#ifndef _PXA_REGS_H_ +#define _PXA_REGS_H_ #include "bitfield.h" #include "hardware.h" @@ -32,69 +33,53 @@ typedef void (*ExcpHndlr) (void) ; /* * PXA Chip selects */ -#ifdef CONFIG_CPU_MONAHANS -#define PXA_CS0_PHYS 0x00000000 /* for both small and large same start */ -#define PXA_CS1_PHYS 0x04000000 /* Small partition start address (64MB) */ -#define PXA_CS1_LPHYS 0x30000000 /* Large partition start address (256MB) */ -#define PXA_CS2_PHYS 0x10000000 /* (64MB) */ -#define PXA_CS3_PHYS 0x14000000 /* (64MB) */ -#define PXA_PCMCIA_PHYS 0x20000000 /* (256MB) */ -#else #define PXA_CS0_PHYS 0x00000000 #define PXA_CS1_PHYS 0x04000000 #define PXA_CS2_PHYS 0x08000000 #define PXA_CS3_PHYS 0x0C000000 #define PXA_CS4_PHYS 0x10000000 #define PXA_CS5_PHYS 0x14000000 -#endif /* CONFIG_CPU_MONAHANS */ /* * Personal Computer Memory Card International Association (PCMCIA) sockets */ - #define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ -#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ -#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ +#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ +#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ #define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ -#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ +#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ -#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ -#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ +#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ +#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ #define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ -#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ +#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ -#ifndef CONFIG_CPU_MONAHANS /* Monahans supports only one slot */ -#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ -#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ +#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ +#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ #define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ -#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ -#endif - -#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ - (0x20000000 + (Nb)*PCMCIASp) -#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ -#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ - (_PCMCIA (Nb) + 2*PCMCIAPrtSp) -#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ - (_PCMCIA (Nb) + 3*PCMCIAPrtSp) - -#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ -#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ -#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ -#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ - -#ifndef CONFIG_CPU_MONAHANS /* Monahans supports only one slot */ -#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ -#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ -#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ -#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ -#endif - +#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ + +#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ + (0x20000000 + (Nb)*PCMCIASp) +#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ +#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ + (_PCMCIA (Nb) + 2*PCMCIAPrtSp) +#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ + (_PCMCIA (Nb) + 3*PCMCIAPrtSp) + +#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ +#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ +#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ +#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ + +#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ +#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ +#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ +#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ /* * DMA Controller */ - #define DCSR0 __REG(0x40000000) /* DMA Control / Status Register for Channel 0 */ #define DCSR1 __REG(0x40000004) /* DMA Control / Status Register for Channel 1 */ #define DCSR2 __REG(0x40000008) /* DMA Control / Status Register for Channel 2 */ @@ -111,22 +96,6 @@ typedef void (*ExcpHndlr) (void) ; #define DCSR13 __REG(0x40000034) /* DMA Control / Status Register for Channel 13 */ #define DCSR14 __REG(0x40000038) /* DMA Control / Status Register for Channel 14 */ #define DCSR15 __REG(0x4000003c) /* DMA Control / Status Register for Channel 15 */ -#define DCSR16 __REG(0x40000040) /* DMA Control / Status Register for Channel 16 */ -#define DCSR17 __REG(0x40000044) /* DMA Control / Status Register for Channel 17 */ -#define DCSR18 __REG(0x40000048) /* DMA Control / Status Register for Channel 18 */ -#define DCSR19 __REG(0x4000004c) /* DMA Control / Status Register for Channel 19 */ -#define DCSR20 __REG(0x40000050) /* DMA Control / Status Register for Channel 20 */ -#define DCSR21 __REG(0x40000054) /* DMA Control / Status Register for Channel 21 */ -#define DCSR22 __REG(0x40000058) /* DMA Control / Status Register for Channel 22 */ -#define DCSR23 __REG(0x4000005c) /* DMA Control / Status Register for Channel 23 */ -#define DCSR24 __REG(0x40000060) /* DMA Control / Status Register for Channel 24 */ -#define DCSR25 __REG(0x40000064) /* DMA Control / Status Register for Channel 25 */ -#define DCSR26 __REG(0x40000068) /* DMA Control / Status Register for Channel 26 */ -#define DCSR27 __REG(0x4000006c) /* DMA Control / Status Register for Channel 27 */ -#define DCSR28 __REG(0x40000070) /* DMA Control / Status Register for Channel 28 */ -#define DCSR29 __REG(0x40000074) /* DMA Control / Status Register for Channel 29 */ -#define DCSR30 __REG(0x40000078) /* DMA Control / Status Register for Channel 30 */ -#define DCSR31 __REG(0x4000007c) /* DMA Control / Status Register for Channel 31 */ #define DCSR(x) __REG2(0x40000000, (x) << 2) @@ -134,14 +103,14 @@ typedef void (*ExcpHndlr) (void) ; #define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ #define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ -#if defined (CONFIG_PXA27X) || defined (CONFIG_CPU_MONAHANS) -#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ -#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ -#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ -#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ -#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ -#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ -#define DCSR_EORINTR (1 << 9) /* The end of Receive */ +#if defined(CONFIG_PXA27X) +#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ +#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ +#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ +#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ +#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ +#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ +#define DCSR_ENRINTR (1 << 9) /* The end of Receive */ #endif #define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ @@ -150,18 +119,8 @@ typedef void (*ExcpHndlr) (void) ; #define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */ #define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */ -#ifdef CONFIG_CPU_MONAHANS -#define DPCSR __REG(0x400000a4) /* DMA Programmed IO control status register */ -#define DRQSR0 __REG(0x400000e0) /* DMA DREQ<0> Status Register */ -#define DRQSR1 __REG(0x400000e4) /* DMA DREQ<1> Status Register */ -#define DRQSR2 __REG(0x400000e8) /* DMA DREQ<2> Status Register */ - -#define DALGN __REG(0x400000a0) /* DMA Alignment Register */ -#endif /* CONFIG_CPU_MONAHANS */ - #define DINT __REG(0x400000f0) /* DMA Interrupt Register */ -#define DRCMR(n) __REG2(0x40000100, (n)<<2) #define DRCMR0 __REG(0x40000100) /* Request to Channel Map Register for DREQ 0 */ #define DRCMR1 __REG(0x40000104) /* Request to Channel Map Register for DREQ 1 */ #define DRCMR2 __REG(0x40000108) /* Request to Channel Map Register for I2S receive Request */ @@ -183,75 +142,29 @@ typedef void (*ExcpHndlr) (void) ; #define DRCMR18 __REG(0x40000148) /* Request to Channel Map Register for ICP transmit Request */ #define DRCMR19 __REG(0x4000014c) /* Request to Channel Map Register for STUART receive Request */ #define DRCMR20 __REG(0x40000150) /* Request to Channel Map Register for STUART transmit Request */ -#define DRCMR21 __REG(0x40000154) /* Request to Channel Map Register for MMC/SDIO 1 receive Request */ -#define DRCMR22 __REG(0x40000158) /* Request to Channel Map Register for MMC/SDIO 2 transmit Request */ +#define DRCMR21 __REG(0x40000154) /* Request to Channel Map Register for MMC receive Request */ +#define DRCMR22 __REG(0x40000158) /* Request to Channel Map Register for MMC transmit Request */ #define DRCMR23 __REG(0x4000015c) /* Reserved */ -#define DRCMR24 __REG(0x40000160) /* Request to Channel Map Register for USB endpoint 0 request */ +#define DRCMR24 __REG(0x40000160) /* Reserved */ #define DRCMR25 __REG(0x40000164) /* Request to Channel Map Register for USB endpoint 1 Request */ #define DRCMR26 __REG(0x40000168) /* Request to Channel Map Register for USB endpoint 2 Request */ #define DRCMR27 __REG(0x4000016C) /* Request to Channel Map Register for USB endpoint 3 Request */ #define DRCMR28 __REG(0x40000170) /* Request to Channel Map Register for USB endpoint 4 Request */ -#define DRCMR29 __REG(0x40000174) /* Request to Channel Map Register for USB endpoint 5 Request */ +#define DRCMR29 __REG(0x40000174) /* Reserved */ #define DRCMR30 __REG(0x40000178) /* Request to Channel Map Register for USB endpoint 6 Request */ #define DRCMR31 __REG(0x4000017C) /* Request to Channel Map Register for USB endpoint 7 Request */ #define DRCMR32 __REG(0x40000180) /* Request to Channel Map Register for USB endpoint 8 Request */ #define DRCMR33 __REG(0x40000184) /* Request to Channel Map Register for USB endpoint 9 Request */ -#define DRCMR34 __REG(0x40000188) /* Request to Channel Map Register for USB endpoint 10 Request */ +#define DRCMR34 __REG(0x40000188) /* Reserved */ #define DRCMR35 __REG(0x4000018C) /* Request to Channel Map Register for USB endpoint 11 Request */ #define DRCMR36 __REG(0x40000190) /* Request to Channel Map Register for USB endpoint 12 Request */ #define DRCMR37 __REG(0x40000194) /* Request to Channel Map Register for USB endpoint 13 Request */ #define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */ -#define DRCMR39 __REG(0x4000019C) /* Request to Channel Map Register for USB endpoint 15 Request */ -#define DRCMR40 __REG(0x400001A0) /* Request to Channel Map Register for USB endpoint 15 Request */ -#define DRCMR41 __REG(0x400001A4) /* Request to Channel Map Register for USB endpoint 15 Request */ -#define DRCMR42 __REG(0x400001A8) /* Request to Channel Map Register for USB endpoint 15 Request */ -#define DRCMR43 __REG(0x400001AC) /* Request to Channel Map Register for USB endpoint 15 Request */ -#define DRCMR44 __REG(0x400001B0) /* Request to Channel Map Register for USB endpoint 15 Request */ -#define DRCMR45 __REG(0x400001B4) /* Request to Channel Map Register for USB endpoint 15 Request */ -#define DRCMR46 __REG(0x400001B8) /* Request to Channel Map Register for USB endpoint 15 Request */ -#define DRCMR47 __REG(0x400001BC) /* Request to Channel Map Register for USB endpoint 15 Request */ -#define DRCMR48 __REG(0x400001C0) /* Request to Channel Map Register for MSL Receive Request 1 */ -#define DRCMR49 __REG(0x400001C4) /* Request to Channel Map Register for MSL Transmit Request 1 */ -#define DRCMR50 __REG(0x400001C8) /* Request to Channel Map Register for MSL Receive Request 2 */ -#define DRCMR51 __REG(0x400001CC) /* Request to Channel Map Register for MSL Transmit Request 2 */ -#define DRCMR52 __REG(0x400001D0) /* Request to Channel Map Register for MSL Receive Request 3 */ -#define DRCMR53 __REG(0x400001D4) /* Request to Channel Map Register for MSL Transmit Request 3 */ -#define DRCMR54 __REG(0x400001D8) /* Request to Channel Map Register for MSL Receive Request 4 */ -#define DRCMR55 __REG(0x400001DC) /* Request to Channel Map Register for MSL Transmit Request 4 */ -#define DRCMR56 __REG(0x400001E0) /* Request to Channel Map Register for MSL Receive Request 5 */ -#define DRCMR57 __REG(0x400001E4) /* Request to Channel Map Register for MSL Transmit Request 5 */ -#define DRCMR58 __REG(0x400001E8) /* Request to Channel Map Register for MSL Receive Request 6 */ -#define DRCMR59 __REG(0x400001EC) /* Request to Channel Map Register for MSL Transmit Request 6 */ -#define DRCMR60 __REG(0x400001F0) /* Request to Channel Map Register for MSL Receive Request 7 */ -#define DRCMR61 __REG(0x400001F4) /* Request to Channel Map Register for MSL Transmit Request 7 */ -#define DRCMR62 __REG(0x400001F8) /* Request to Channel Map Register for USIM 1 Receive Request */ -#define DRCMR63 __REG(0x400001FC) /* Request to Channel Map Register for USIM 1 Transimit Request */ - -#define DRCMR64 __REG(0x40001100) /* Reserved */ -#define DRCMR65 __REG(0x40001104) /* Reserved */ -#define DRCMR66 __REG(0x40001108) /* Request to channel Map Register for SSP3 Receive Request */ -#define DRCMR67 __REG(0x4000110C) /* Request to channel Map Register for SSP3 Receive Request */ - -#define DRCMR68 __REG(0x40001110) /* Reserved */ -#define DRCMR69 __REG(0x40001114) /* Reserved */ -#define DRCMR70 __REG(0x40001118) /* Reserved */ - -#define DRCMR71 __REG(0x4000111C) /* Request to Channel Map Register for TPM Receive Request */ -#define DRCMR72 __REG(0x40001120) /* Request to Channel Map Register for TPM Transmit Request 1 */ -#define DRCMR73 __REG(0x40001124) /* Request to Channel Map Register for TPM Transmit Request 2 */ -#define DRCMR74 __REG(0x40001128) /* Request to Channel Map Register for DREQ<2> */ - -#define DRCMR91 __REG(0x4000116C) /* Request to Channel Map Register for USIM 2 Receive Request */ -#define DRCMR92 __REG(0x40001170) /* Request to Channel Map Register for USIM 2 Transmit Request */ - -#define DRCMR93 __REG(0x40001174) /* Request to Channel Map Register for MMC Controller 1 Request */ -#define DRCMR94 __REG(0x40001178) /* Request to Channel Map Register for MMC Controller 2 Request */ -#define DRCMR95 __REG(0x4000117C) /* Request to Channel Map Register for AC97 Surround Transmit Request */ -#define DRCMR96 __REG(0x40001180) /* Request to Channel Map Register for AC97 centre/LFE Transmit Request */ -#define DRCMR97 __REG(0x40001184) /* Request to Channel Map Register for NAND interface data transmit & receive Request */ -#define DRCMR98 __REG(0x40001188) /* Reserved */ -#define DRCMR99 __REG(0x4000118C) /* Request to Channel Map Register for NAND interface command transmit Request */ +#define DRCMR39 __REG(0x4000019C) /* Reserved */ +#define DRCMR68 __REG(0x40001110) /* Request to Channel Map Register for Camera FIFO 0 Request */ +#define DRCMR69 __REG(0x40001114) /* Request to Channel Map Register for Camera FIFO 1 Request */ +#define DRCMR70 __REG(0x40001118) /* Request to Channel Map Register for Camera FIFO 2 Request */ #define DRCMRRXSADR DRCMR2 #define DRCMRTXSADR DRCMR3 @@ -272,12 +185,9 @@ typedef void (*ExcpHndlr) (void) ; #define DRCMRTXSTTHR DRCMR20 #define DRCMRRXMMC DRCMR21 #define DRCMRTXMMC DRCMR22 -#define DRCMRRXMMC2 DRCMR93 -#define DRCMRTXMMC2 DRCMR94 -#define DRCMRUDC(x) DRCMR((x) + 24) #define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */ -#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */ +#define DRCMR_CHLNUM 0x0f /* mask for Channel Number (read / write) */ #define DDADR0 __REG(0x40000200) /* DMA Descriptor Address Register Channel 0 */ #define DSADR0 __REG(0x40000204) /* DMA Source Address Register Channel 0 */ @@ -352,11 +262,11 @@ typedef void (*ExcpHndlr) (void) ; #define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */ #define DDADR_STOP (1 << 0) /* Stop (read / write) */ -#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ -#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ +#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ +#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ #define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ #define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ -#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ +#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ #define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ #define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ #define DCMD_BURST8 (1 << 16) /* 8 byte burst */ @@ -372,11 +282,9 @@ typedef void (*ExcpHndlr) (void) ; #define DCMD_RXMCDR (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4) #define DCMD_TXPCDR (DCMD_INCSRCADDR|DCMD_FLOWTRG|DCMD_BURST32|DCMD_WIDTH4) - /* * UARTs */ - /* Full Function UART (FFUART) */ #define FFUART FFRBR #define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */ @@ -469,7 +377,7 @@ typedef void (*ExcpHndlr) (void) ; #define LSR_OE (1 << 1) /* Overrun Error */ #define LSR_DR (1 << 0) /* Data Ready */ -#define MCR_LOOP (1 << 4) +#define MCR_LOOP (1 << 4) */ #define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */ #define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */ #define MCR_RTS (1 << 1) /* Request to Send */ @@ -487,13 +395,6 @@ typedef void (*ExcpHndlr) (void) ; /* * IrSR (Infrared Selection Register) */ -#ifdef CONFIG_CPU_MONAHANS -#define STISR_RXPL (1 << 4) /* Receive Data Polarity */ -#define STISR_TXPL (1 << 3) /* Transmit Data Polarity */ -#define STISR_XMODE (1 << 2) /* Transmit Pulse Width Select */ -#define STISR_RCVEIR (1 << 1) /* Receiver SIR Enable */ -#define STISR_XMITIR (1 << 0) /* Transmitter SIR Enable */ -#else #define IrSR_OFFSET 0x20 #define IrSR_RXPL_NEG_IS_ZERO (1<<4) @@ -508,85 +409,85 @@ typedef void (*ExcpHndlr) (void) ; #define IrSR_XMITIR_UART_MODE 0x0 #define IrSR_IR_RECEIVE_ON (\ - IrSR_RXPL_NEG_IS_ZERO | \ - IrSR_TXPL_POS_IS_ZERO | \ - IrSR_XMODE_PULSE_3_16 | \ - IrSR_RCVEIR_IR_MODE | \ - IrSR_XMITIR_UART_MODE) + IrSR_RXPL_NEG_IS_ZERO | \ + IrSR_TXPL_POS_IS_ZERO | \ + IrSR_XMODE_PULSE_3_16 | \ + IrSR_RCVEIR_IR_MODE | \ + IrSR_XMITIR_UART_MODE) #define IrSR_IR_TRANSMIT_ON (\ - IrSR_RXPL_NEG_IS_ZERO | \ - IrSR_TXPL_POS_IS_ZERO | \ - IrSR_XMODE_PULSE_3_16 | \ - IrSR_RCVEIR_UART_MODE | \ - IrSR_XMITIR_IR_MODE) -#endif /* not CONFIG_CPU_MONAHANS */ + IrSR_RXPL_NEG_IS_ZERO | \ + IrSR_TXPL_POS_IS_ZERO | \ + IrSR_XMODE_PULSE_3_16 | \ + IrSR_RCVEIR_UART_MODE | \ + IrSR_XMITIR_IR_MODE) /* * I2C registers */ - #define IBMR __REG(0x40301680) /* I2C Bus Monitor Register - IBMR */ #define IDBR __REG(0x40301688) /* I2C Data Buffer Register - IDBR */ #define ICR __REG(0x40301690) /* I2C Control Register - ICR */ #define ISR __REG(0x40301698) /* I2C Status Register - ISR */ #define ISAR __REG(0x403016A0) /* I2C Slave Address Register - ISAR */ -#define PWRIBMR __REG(0x40f00180) /* Power I2C Bus Monitor Register-IBMR */ -#define PWRIDBR __REG(0x40f00188) /* Power I2C Data Buffer Register-IDBR */ -#define PWRICR __REG(0x40f00190) /* Power I2C Control Register - ICR */ -#define PWRISR __REG(0x40f00198) /* Power I2C Status Register - ISR */ -#define PWRISAR __REG(0x40f001A0) /*Power I2C Slave Address Register-ISAR */ - -#define ICR_START (1 << 0) /* start bit */ -#define ICR_STOP (1 << 1) /* stop bit */ -#define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */ -#define ICR_TB (1 << 3) /* transfer byte bit */ -#define ICR_MA (1 << 4) /* master abort */ -#define ICR_SCLE (1 << 5) /* master clock enable */ -#define ICR_IUE (1 << 6) /* unit enable */ -#define ICR_GCD (1 << 7) /* general call disable */ -#define ICR_ITEIE (1 << 8) /* enable tx interrupts */ -#define ICR_IRFIE (1 << 9) /* enable rx interrupts */ -#define ICR_BEIE (1 << 10) /* enable bus error ints */ -#define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */ -#define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */ -#define ICR_SADIE (1 << 13) /* slave address detected int enable */ -#define ICR_UR (1 << 14) /* unit reset */ - -#define ISR_RWM (1 << 0) /* read/write mode */ -#define ISR_ACKNAK (1 << 1) /* ack/nak status */ -#define ISR_UB (1 << 2) /* unit busy */ -#define ISR_IBB (1 << 3) /* bus busy */ -#define ISR_SSD (1 << 4) /* slave stop detected */ -#define ISR_ALD (1 << 5) /* arbitration loss detected */ -#define ISR_ITE (1 << 6) /* tx buffer empty */ -#define ISR_IRF (1 << 7) /* rx buffer full */ -#define ISR_GCAD (1 << 8) /* general call address detected */ -#define ISR_SAD (1 << 9) /* slave address detected */ -#define ISR_BED (1 << 10) /* bus error no ACK/NAK */ - +#define PWRIBMR __REG(0x40f00180) /* Power I2C Bus Monitor Register-IBMR */ +#define PWRIDBR __REG(0x40f00188) /* Power I2C Data Buffer Register-IDBR */ +#define PWRICR __REG(0x40f00190) /* Power I2C Control Register - ICR */ +#define PWRISR __REG(0x40f00198) /* Power I2C Status Register - ISR */ +#define PWRISAR __REG(0x40f001A0) /* Power I2C Slave Address Register-ISAR */ + +/* ----- Control register bits ---------------------------------------- */ + +#define ICR_START 0x1 /* start bit */ +#define ICR_STOP 0x2 /* stop bit */ +#define ICR_ACKNAK 0x4 /* send ACK(0) or NAK(1) */ +#define ICR_TB 0x8 /* transfer byte bit */ +#define ICR_MA 0x10 /* master abort */ +#define ICR_SCLE 0x20 /* master clock enable */ +#define ICR_IUE 0x40 /* unit enable */ +#define ICR_GCD 0x80 /* general call disable */ +#define ICR_ITEIE 0x100 /* enable tx interrupts */ +#define ICR_IRFIE 0x200 /* enable rx interrupts */ +#define ICR_BEIE 0x400 /* enable bus error ints */ +#define ICR_SSDIE 0x800 /* slave STOP detected int enable */ +#define ICR_ALDIE 0x1000 /* enable arbitration interrupt */ +#define ICR_SADIE 0x2000 /* slave address detected int enable */ +#define ICR_UR 0x4000 /* unit reset */ +#define ICR_FM 0x8000 /* Fast Mode */ + +/* ----- Status register bits ----------------------------------------- */ + +#define ISR_RWM 0x1 /* read/write mode */ +#define ISR_ACKNAK 0x2 /* ack/nak status */ +#define ISR_UB 0x4 /* unit busy */ +#define ISR_IBB 0x8 /* bus busy */ +#define ISR_SSD 0x10 /* slave stop detected */ +#define ISR_ALD 0x20 /* arbitration loss detected */ +#define ISR_ITE 0x40 /* tx buffer empty */ +#define ISR_IRF 0x80 /* rx buffer full */ +#define ISR_GCAD 0x100 /* general call address detected */ +#define ISR_SAD 0x200 /* slave address detected */ +#define ISR_BED 0x400 /* bus error no ACK/NAK */ /* * Serial Audio Controller */ - -/* FIXME: This clash with SA1111 defines */ -#ifndef CONFIG_SA1111 -#define SACR0 __REG(0x40400000) /* Global Control Register */ -#define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */ -#define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */ -#define SAIMR __REG(0x40400014) /* Serial Audio Interrupt Mask Register */ -#define SAICR __REG(0x40400018) /* Serial Audio Interrupt Clear Register */ -#define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */ -#define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */ -#endif +/* FIXME the audio defines collide w/ the SA1111 defines. I don't like these + * short defines because there is too much chance of namespace collision + */ +/*#define SACR0 __REG(0x40400000) / Global Control Register */ +/*#define SACR1 __REG(0x40400004) / Serial Audio I 2 S/MSB-Justified Control Register */ +/*#define SASR0 __REG(0x4040000C) / Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */ +/*#define SAIMR __REG(0x40400014) / Serial Audio Interrupt Mask Register */ +/*#define SAICR __REG(0x40400018) / Serial Audio Interrupt Clear Register */ +/*#define SADIV __REG(0x40400060) / Audio Clock Divider Register. */ +/*#define SADR __REG(0x40400080) / Serial Audio Data Register (TX and RX FIFO access Register). */ /* * AC97 Controller registers */ - #define POCR __REG(0x40500000) /* PCM Out Control Register */ #define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ @@ -660,13 +561,9 @@ typedef void (*ExcpHndlr) (void) ; #define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */ #define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */ - /* * USB Device Controller - * PXA25x and PXA27x USB device controller registers are different. */ -#if defined(CONFIG_PXA25x) - #define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */ #define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */ #define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */ @@ -822,250 +719,63 @@ typedef void (*ExcpHndlr) (void) ; #define USIR1_IR14 (1 << 6) /* Interrup request ep 14 */ #define USIR1_IR15 (1 << 7) /* Interrup request ep 15 */ -#elif defined(CONFIG_PXA27X)||( CONFIG_CPU_MONAHANS) - -#define UDCCR __REG(0x40600000) /* UDC Control Register */ -#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */ -#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation - Protocol Port Support */ -#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol - Support */ -#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol - Enable */ -#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */ -#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */ -#define UDCCR_ACN_S 11 -#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */ -#define UDCCR_AIN_S 8 -#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface - Setting Number */ -#define UDCCR_AAISN_S 5 -#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active - Configuration */ -#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration - Error */ -#define UDCCR_UDR (1 << 2) /* UDC Resume */ -#define UDCCR_UDA (1 << 1) /* UDC Active */ -#define UDCCR_UDE (1 << 0) /* UDC Enable */ - -#define UDCICR0 __REG(0x40600004) /* UDC Interrupt Control Register0 */ -#define UDCICR1 __REG(0x40600008) /* UDC Interrupt Control Register1 */ -#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */ -#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */ - -#define UDC_INT_FIFOERROR (0x2) -#define UDC_INT_PACKETCMP (0x1) - -#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) -#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */ -#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */ -#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */ -#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */ -#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */ - -#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */ -#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */ -#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) -#define UDCISR1_IRCC (1 << 31) /* IntEn - Configuration Change */ -#define UDCISR1_IRSOF (1 << 30) /* IntEn - Start of Frame */ -#define UDCISR1_IRRU (1 << 29) /* IntEn - Resume */ -#define UDCISR1_IRSU (1 << 28) /* IntEn - Suspend */ -#define UDCISR1_IRRS (1 << 27) /* IntEn - Reset */ - -#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */ -#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */ -#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */ -#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt - Rising Edge Interrupt Enable */ -#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt - Falling Edge Interrupt Enable */ -#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge - Interrupt Enable */ -#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge - Interrupt Enable */ -#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge - Interrupt Enable */ -#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge - Interrupt Enable */ -#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge - Interrupt Enable */ -#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge - Interrupt Enable */ -#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising - Edge Interrupt Enable */ -#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling - Edge Interrupt Enable */ -#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge - Interrupt Enable */ -#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge - Interrupt Enable */ -#define UDCOTGISR __REG(0x4060001C) /* UDC OTG Interrupt Status Register*/ -#define UP2OCR __REG(0x40600020) /* Port 2 control register */ -#define UP3OCR __REG(0x40600024) /* Port 3 control register */ - -#define UDCCSN(x) __REG2(0x40600100, (x) << 2) -#define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */ -#define UDCCSR0_ACM (1 << 9) /* ACK control mode */ -#define UDCCSR0_AREN (1 << 8) /* ACK response enable */ -#define UDCCSR0_SA (1 << 7) /* Setup Active */ -#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */ -#define UDCCSR0_FST (1 << 5) /* Force Stall */ -#define UDCCSR0_SST (1 << 4) /* Sent Stall */ -#define UDCCSR0_DME (1 << 3) /* DMA Enable */ -#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */ -#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */ -#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */ - -#define UDCCSRA __REG(0x40600104) /* UDC Control/Status register - Endpoint A */ -#define UDCCSRB __REG(0x40600108) /* UDC Control/Status register - Endpoint B */ -#define UDCCSRC __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */ -#define UDCCSRD __REG(0x40600110) /* UDC Control/Status register - Endpoint D */ -#define UDCCSRE __REG(0x40600114) /* UDC Control/Status register - Endpoint E */ -#define UDCCSRF __REG(0x40600118) /* UDC Control/Status register - Endpoint F */ -#define UDCCSRG __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */ -#define UDCCSRH __REG(0x40600120) /* UDC Control/Status register - Endpoint H */ -#define UDCCSRI __REG(0x40600124) /* UDC Control/Status register - Endpoint I */ -#define UDCCSRJ __REG(0x40600128) /* UDC Control/Status register - Endpoint J */ -#define UDCCSRK __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */ -#define UDCCSRL __REG(0x40600130) /* UDC Control/Status register - Endpoint L */ -#define UDCCSRM __REG(0x40600134) /* UDC Control/Status register - Endpoint M */ -#define UDCCSRN __REG(0x40600138) /* UDC Control/Status register - Endpoint N */ -#define UDCCSRP __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */ -#define UDCCSRQ __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */ -#define UDCCSRR __REG(0x40600144) /* UDC Control/Status register - Endpoint R */ -#define UDCCSRS __REG(0x40600148) /* UDC Control/Status register - Endpoint S */ -#define UDCCSRT __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */ -#define UDCCSRU __REG(0x40600150) /* UDC Control/Status register - Endpoint U */ -#define UDCCSRV __REG(0x40600154) /* UDC Control/Status register - Endpoint V */ -#define UDCCSRW __REG(0x40600158) /* UDC Control/Status register - Endpoint W */ -#define UDCCSRX __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */ - -#define UDCCSR_DPE (1 << 9) /* Data Packet Error */ -#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */ -#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */ -#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */ -#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */ -#define UDCCSR_FST (1 << 5) /* Force STALL */ -#define UDCCSR_SST (1 << 4) /* Sent STALL */ -#define UDCCSR_DME (1 << 3) /* DMA Enable */ -#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */ -#define UDCCSR_PC (1 << 1) /* Packet Complete */ -#define UDCCSR_FS (1 << 0) /* FIFO needs service */ - -#define UDCBCN(x) __REG2(0x40600200, (x)<<2) -#define UDCBCR0 __REG(0x40600200) /* Byte Count Register - EP0 */ -#define UDCBCRA __REG(0x40600204) /* Byte Count Register - EPA */ -#define UDCBCRB __REG(0x40600208) /* Byte Count Register - EPB */ -#define UDCBCRC __REG(0x4060020C) /* Byte Count Register - EPC */ -#define UDCBCRD __REG(0x40600210) /* Byte Count Register - EPD */ -#define UDCBCRE __REG(0x40600214) /* Byte Count Register - EPE */ -#define UDCBCRF __REG(0x40600218) /* Byte Count Register - EPF */ -#define UDCBCRG __REG(0x4060021C) /* Byte Count Register - EPG */ -#define UDCBCRH __REG(0x40600220) /* Byte Count Register - EPH */ -#define UDCBCRI __REG(0x40600224) /* Byte Count Register - EPI */ -#define UDCBCRJ __REG(0x40600228) /* Byte Count Register - EPJ */ -#define UDCBCRK __REG(0x4060022C) /* Byte Count Register - EPK */ -#define UDCBCRL __REG(0x40600230) /* Byte Count Register - EPL */ -#define UDCBCRM __REG(0x40600234) /* Byte Count Register - EPM */ -#define UDCBCRN __REG(0x40600238) /* Byte Count Register - EPN */ -#define UDCBCRP __REG(0x4060023C) /* Byte Count Register - EPP */ -#define UDCBCRQ __REG(0x40600240) /* Byte Count Register - EPQ */ -#define UDCBCRR __REG(0x40600244) /* Byte Count Register - EPR */ -#define UDCBCRS __REG(0x40600248) /* Byte Count Register - EPS */ -#define UDCBCRT __REG(0x4060024C) /* Byte Count Register - EPT */ -#define UDCBCRU __REG(0x40600250) /* Byte Count Register - EPU */ -#define UDCBCRV __REG(0x40600254) /* Byte Count Register - EPV */ -#define UDCBCRW __REG(0x40600258) /* Byte Count Register - EPW */ -#define UDCBCRX __REG(0x4060025C) /* Byte Count Register - EPX */ - -#define UDCDN(x) __REG2(0x40600300, (x)<<2) -#define PHYS_UDCDN(x) (0x40600300 + ((x)<<2)) -#define PUDCDN(x) (volatile u32 *)(io_p2v(PHYS_UDCDN((x)))) -#define UDCDR0 __REG(0x40600300) /* Data Register - EP0 */ -#define UDCDRA __REG(0x40600304) /* Data Register - EPA */ -#define UDCDRB __REG(0x40600308) /* Data Register - EPB */ -#define UDCDRC __REG(0x4060030C) /* Data Register - EPC */ -#define UDCDRD __REG(0x40600310) /* Data Register - EPD */ -#define UDCDRE __REG(0x40600314) /* Data Register - EPE */ -#define UDCDRF __REG(0x40600318) /* Data Register - EPF */ -#define UDCDRG __REG(0x4060031C) /* Data Register - EPG */ -#define UDCDRH __REG(0x40600320) /* Data Register - EPH */ -#define UDCDRI __REG(0x40600324) /* Data Register - EPI */ -#define UDCDRJ __REG(0x40600328) /* Data Register - EPJ */ -#define UDCDRK __REG(0x4060032C) /* Data Register - EPK */ -#define UDCDRL __REG(0x40600330) /* Data Register - EPL */ -#define UDCDRM __REG(0x40600334) /* Data Register - EPM */ -#define UDCDRN __REG(0x40600338) /* Data Register - EPN */ -#define UDCDRP __REG(0x4060033C) /* Data Register - EPP */ -#define UDCDRQ __REG(0x40600340) /* Data Register - EPQ */ -#define UDCDRR __REG(0x40600344) /* Data Register - EPR */ -#define UDCDRS __REG(0x40600348) /* Data Register - EPS */ -#define UDCDRT __REG(0x4060034C) /* Data Register - EPT */ -#define UDCDRU __REG(0x40600350) /* Data Register - EPU */ -#define UDCDRV __REG(0x40600354) /* Data Register - EPV */ -#define UDCDRW __REG(0x40600358) /* Data Register - EPW */ -#define UDCDRX __REG(0x4060035C) /* Data Register - EPX */ - -#define UDCCN(x) __REG2(0x40600400, (x)<<2) -#define UDCCRA __REG(0x40600404) /* Configuration register EPA */ -#define UDCCRB __REG(0x40600408) /* Configuration register EPB */ -#define UDCCRC __REG(0x4060040C) /* Configuration register EPC */ -#define UDCCRD __REG(0x40600410) /* Configuration register EPD */ -#define UDCCRE __REG(0x40600414) /* Configuration register EPE */ -#define UDCCRF __REG(0x40600418) /* Configuration register EPF */ -#define UDCCRG __REG(0x4060041C) /* Configuration register EPG */ -#define UDCCRH __REG(0x40600420) /* Configuration register EPH */ -#define UDCCRI __REG(0x40600424) /* Configuration register EPI */ -#define UDCCRJ __REG(0x40600428) /* Configuration register EPJ */ -#define UDCCRK __REG(0x4060042C) /* Configuration register EPK */ -#define UDCCRL __REG(0x40600430) /* Configuration register EPL */ -#define UDCCRM __REG(0x40600434) /* Configuration register EPM */ -#define UDCCRN __REG(0x40600438) /* Configuration register EPN */ -#define UDCCRP __REG(0x4060043C) /* Configuration register EPP */ -#define UDCCRQ __REG(0x40600440) /* Configuration register EPQ */ -#define UDCCRR __REG(0x40600444) /* Configuration register EPR */ -#define UDCCRS __REG(0x40600448) /* Configuration register EPS */ -#define UDCCRT __REG(0x4060044C) /* Configuration register EPT */ -#define UDCCRU __REG(0x40600450) /* Configuration register EPU */ -#define UDCCRV __REG(0x40600454) /* Configuration register EPV */ -#define UDCCRW __REG(0x40600458) /* Configuration register EPW */ -#define UDCCRX __REG(0x4060045C) /* Configuration register EPX */ - -#define UDCCONR_CN (0x03 << 25) /* Configuration Number */ -#define UDCCONR_CN_S (25) -#define UDCCONR_IN (0x07 << 22) /* Interface Number */ -#define UDCCONR_IN_S (22) -#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */ -#define UDCCONR_AISN_S (19) -#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */ -#define UDCCONR_EN_S (15) -#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */ -#define UDCCONR_ET_S (13) -#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */ -#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */ -#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */ -#define UDCCONR_ET_NU (0x00 << 13) /* Not used */ -#define UDCCONR_ED (1 << 12) /* Endpoint Direction */ -#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */ -#define UDCCONR_MPS_S (2) -#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */ -#define UDCCONR_EE (1 << 0) /* Endpoint Enable */ - - -#define UDC_INT_FIFOERROR (0x2) -#define UDC_INT_PACKETCMP (0x1) - -#define UDC_FNR_MASK (0x7ff) - -#define UDCCSR_WR_MASK (UDCCSR_DME|UDCCSR_FST) -#define UDC_BCR_MASK (0x3ff) +#if defined(CONFIG_PXA27X) +/* + * USB Host Controller + */ +#define UHCREV __REG(0x4C000000) +#define UHCHCON __REG(0x4C000004) +#define UHCCOMS __REG(0x4C000008) +#define UHCINTS __REG(0x4C00000C) +#define UHCINTE __REG(0x4C000010) +#define UHCINTD __REG(0x4C000014) +#define UHCHCCA __REG(0x4C000018) +#define UHCPCED __REG(0x4C00001C) +#define UHCCHED __REG(0x4C000020) +#define UHCCCED __REG(0x4C000024) +#define UHCBHED __REG(0x4C000028) +#define UHCBCED __REG(0x4C00002C) +#define UHCDHEAD __REG(0x4C000030) +#define UHCFMI __REG(0x4C000034) +#define UHCFMR __REG(0x4C000038) +#define UHCFMN __REG(0x4C00003C) +#define UHCPERS __REG(0x4C000040) +#define UHCLST __REG(0x4C000044) +#define UHCRHDA __REG(0x4C000048) +#define UHCRHDB __REG(0x4C00004C) +#define UHCRHS __REG(0x4C000050) +#define UHCRHPS1 __REG(0x4C000054) +#define UHCRHPS2 __REG(0x4C000058) +#define UHCRHPS3 __REG(0x4C00005C) +#define UHCSTAT __REG(0x4C000060) +#define UHCHR __REG(0x4C000064) +#define UHCHIE __REG(0x4C000068) +#define UHCHIT __REG(0x4C00006C) + +#define UHCHR_FSBIR (1<<0) +#define UHCHR_FHR (1<<1) +#define UHCHR_CGR (1<<2) +#define UHCHR_SSDC (1<<3) +#define UHCHR_UIT (1<<4) +#define UHCHR_SSE (1<<5) +#define UHCHR_PSPL (1<<6) +#define UHCHR_PCPL (1<<7) +#define UHCHR_SSEP0 (1<<9) +#define UHCHR_SSEP1 (1<<10) +#define UHCHR_SSEP2 (1<<11) + +#define UHCHIE_UPRIE (1<<13) +#define UHCHIE_UPS2IE (1<<12) +#define UHCHIE_UPS1IE (1<<11) +#define UHCHIE_TAIE (1<<10) +#define UHCHIE_HBAIE (1<<8) +#define UHCHIE_RWIE (1<<7) + #endif /* * Fast Infrared Communication Port */ - -#define FICP __REG(0x40800000) /* Start of FICP area */ #define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */ #define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */ #define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */ @@ -1073,78 +783,45 @@ typedef void (*ExcpHndlr) (void) ; #define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */ #define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */ -#define ICCR0_AME (1 << 7) /* Adress match enable */ -#define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */ -#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */ -#define ICCR0_RXE (1 << 4) /* Receive enable */ -#define ICCR0_TXE (1 << 3) /* Transmit enable */ -#define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */ -#define ICCR0_LBM (1 << 1) /* Loopback mode */ -#define ICCR0_ITR (1 << 0) /* IrDA transmission */ - -#ifdef CONFIG_PXA27X -#define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */ -#define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */ -#define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */ -#define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */ -#define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */ -#define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */ -#endif - -#ifdef CONFIG_PXA27X -#define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */ -#endif -#define ICSR0_FRE (1 << 5) /* Framing error */ -#define ICSR0_RFS (1 << 4) /* Receive FIFO service request */ -#define ICSR0_TFS (1 << 3) /* Transnit FIFO service request */ -#define ICSR0_RAB (1 << 2) /* Receiver abort */ -#define ICSR0_TUR (1 << 1) /* Trunsmit FIFO underun */ -#define ICSR0_EIF (1 << 0) /* End/Error in FIFO */ - -#define ICSR1_ROR (1 << 6) /* Receiver FIFO underrun */ -#define ICSR1_CRE (1 << 5) /* CRC error */ -#define ICSR1_EOF (1 << 4) /* End of frame */ -#define ICSR1_TNF (1 << 3) /* Transmit FIFO not full */ -#define ICSR1_RNE (1 << 2) /* Receive FIFO not empty */ -#define ICSR1_TBY (1 << 1) /* Tramsmiter busy flag */ -#define ICSR1_RSY (1 << 0) /* Recevier synchronized flag */ - - /* * Real Time Clock */ - #define RCNR __REG(0x40900000) /* RTC Count Register */ #define RTAR __REG(0x40900004) /* RTC Alarm Register */ #define RTSR __REG(0x40900008) /* RTC Status Register */ #define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */ -#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ - -#define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */ -#define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */ +#define RDAR1 __REG(0x40900018) /* Wristwatch Day Alarm Reg 1 */ +#define RDAR2 __REG(0x40900020) /* Wristwatch Day Alarm Reg 2 */ +#define RYAR1 __REG(0x4090001C) /* Wristwatch Year Alarm Reg 1 */ +#define RYAR2 __REG(0x40900024) /* Wristwatch Year Alarm Reg 2 */ +#define SWAR1 __REG(0x4090002C) /* Stopwatch Alarm Register 1 */ +#define SWAR2 __REG(0x40900030) /* Stopwatch Alarm Register 2 */ +#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ +#define RDCR __REG(0x40900010) /* RTC Day Count Register. */ +#define RYCR __REG(0x40900014) /* RTC Year Count Register. */ +#define SWCR __REG(0x40900028) /* Stopwatch Count Register */ +#define RTCPICR __REG(0x40900034) /* Periodic Interrupt Counter Register */ + +#define RTSR_PICE (1 << 15) /* Peridoc interrupt count enable */ +#define RTSR_PIALE (1 << 14) /* Peridoc interrupt Alarm enable */ +#define RTSR_PIAL (1 << 13) /* Peridoc interrupt Alarm status */ #define RTSR_HZE (1 << 3) /* HZ interrupt enable */ #define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ #define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ #define RTSR_AL (1 << 0) /* RTC alarm detected */ - /* * OS Timer & Match Registers */ - #define OSMR0 __REG(0x40A00000) /* */ #define OSMR1 __REG(0x40A00004) /* */ #define OSMR2 __REG(0x40A00008) /* */ #define OSMR3 __REG(0x40A0000C) /* */ -#define OSMR4 __REG(0x40A00080) /* */ #define OSCR __REG(0x40A00010) /* OS Timer Counter Register */ -#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ -#define OMCR4 __REG(0x40A000C0) /* */ #define OSSR __REG(0x40A00014) /* OS Timer Status Register */ #define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */ #define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */ -#define OSSR_M4 (1 << 4) /* Match status channel 4 */ #define OSSR_M3 (1 << 3) /* Match status channel 3 */ #define OSSR_M2 (1 << 2) /* Match status channel 2 */ #define OSSR_M1 (1 << 1) /* Match status channel 1 */ @@ -1152,17 +829,14 @@ typedef void (*ExcpHndlr) (void) ; #define OWER_WME (1 << 0) /* Watchdog Match Enable */ -#define OIER_E4 (1 << 4) /* Interrupt enable channel 4 */ #define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */ #define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */ #define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */ #define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */ - /* * Pulse Width Modulator */ - #define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */ #define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */ #define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */ @@ -1171,25 +845,19 @@ typedef void (*ExcpHndlr) (void) ; #define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */ #define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */ - /* * Interrupt Controller */ -/* ICIP to ICPR can only be accessed by coprocessor */ -/* #ifndef CONFIG_CPU_MONAHANS*/ #define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */ #define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */ #define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */ #define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */ #define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ -/* #endif // CONFIG_CPU_MONAHANS */ #define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ - /* * General Purpose I/O */ - #define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */ #define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */ #define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */ @@ -1218,39 +886,26 @@ typedef void (*ExcpHndlr) (void) ; #define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */ #define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */ -#ifndef CONFIG_CPU_MONAHANS #define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */ #define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */ #define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */ #define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */ #define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */ -#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO<95-80> */ -#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */ -#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */ -#endif - -#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */ -#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */ -#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */ -#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO<127:96> */ -#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */ -#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<127:96> */ -#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */ +#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO 80 */ /* More handy macros. The argument is a literal GPIO number. */ #define GPIO_bit(x) (1 << ((x) & 0x1f)) -#if defined (CONFIG_PXA27X) || (CONFIG_CPU_MONAHANS) +#ifdef CONFIG_PXA27X /* Interrupt Controller */ -/* #ifndef CONFIG_CPU_MONAHANS */ + #define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ #define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ #define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ #define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ #define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ -/* #endif //CONFIG_CPU_MONAHANS */ #define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) #define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) @@ -1261,51 +916,15 @@ typedef void (*ExcpHndlr) (void) ; #define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) #define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) -#define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3)) -#define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3)) -#define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3)) -#define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3)) -#define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3)) -#define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3)) -#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3)) -#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \ - ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U))) - -#ifdef CONFIG_CPU_MONAHANS -#define GSDR0 __REG(0x40E00400) /* Bit-wise Set of GPDR[31:0] */ -#define GSDR1 __REG(0x40E00404) /* Bit-wise Set of GPDR[63:32] */ -#define GSDR2 __REG(0x40E00408) /* Bit-wise Set of GPDR[95:64] */ -#define GSDR3 __REG(0x40E0040C) /* Bit-wise Set of GPDR[127:96] */ - -#define GCDR0 __REG(0x40E00420) /* Bit-wise Clear of GPDR[31:0] */ -#define GCDR1 __REG(0x40E00424) /* Bit-wise Clear of GPDR[63:32] */ -#define GCDR2 __REG(0x40E00428) /* Bit-wise Clear of GPDR[95:64] */ -#define GCDR3 __REG(0x40E0042C) /* Bit-wise Clear of GPDR[127:96] */ - -#define GSRER0 __REG(0x40E00440) /* Set Rising Edge Det. Enable [31:0] */ -#define GSRER1 __REG(0x40E00444) /* Set Rising Edge Det. Enable [63:32] */ -#define GSRER2 __REG(0x40E00448) /* Set Rising Edge Det. Enable [95:64] */ -#define GSRER3 __REG(0x40E0044C) /* Set Rising Edge Det. Enable [127:96] */ - -#define GCRER0 __REG(0x40E00460) /* Clear Rising Edge Det. Enable [31:0] */ -#define GCRER1 __REG(0x40E00464) /* Clear Rising Edge Det. Enable [63:32] */ -#define GCRER2 __REG(0x40E00468) /* Clear Rising Edge Det. Enable [95:64] */ -#define GCRER3 __REG(0x40E0046C) /* Clear Rising Edge Det. Enable[127:96] */ - -#define GSFER0 __REG(0x40E00480) /* Set Falling Edge Det. Enable [31:0] */ -#define GSFER1 __REG(0x40E00484) /* Set Falling Edge Det. Enable [63:32] */ -#define GSFER2 __REG(0x40E00488) /* Set Falling Edge Det. Enable [95:64] */ -#define GSFER3 __REG(0x40E0048C) /* Set Falling Edge Det. Enable[127:96] */ - -#define GCFER0 __REG(0x40E004A0) /* Clr Falling Edge Det. Enable [31:0] */ -#define GCFER1 __REG(0x40E004A4) /* Clr Falling Edge Det. Enable [63:32] */ -#define GCFER2 __REG(0x40E004A8) /* Clr Falling Edge Det. Enable [95:64] */ -#define GCFER3 __REG(0x40E004AC) /* Clr Falling Edge Det. Enable[127:96] */ - -#define GSDR(x) __REG2(0x40E00400, ((x) & 0x60) >> 3) -#define GCDR(x) __REG2(0x40300420, ((x) & 0x60) >> 3) -#endif - +#define GPLR(x) ((((x) & 0x7f) < 96) ? _GPLR(x) : GPLR3) +#define GPDR(x) ((((x) & 0x7f) < 96) ? _GPDR(x) : GPDR3) +#define GPSR(x) ((((x) & 0x7f) < 96) ? _GPSR(x) : GPSR3) +#define GPCR(x) ((((x) & 0x7f) < 96) ? _GPCR(x) : GPCR3) +#define GRER(x) ((((x) & 0x7f) < 96) ? _GRER(x) : GRER3) +#define GFER(x) ((((x) & 0x7f) < 96) ? _GFER(x) : GFER3) +#define GEDR(x) ((((x) & 0x7f) < 96) ? _GEDR(x) : GEDR3) +#define GAFR(x) ((((x) & 0x7f) < 96) ? _GAFR(x) : \ + ((((x) & 0x7f) < 112) ? GAFR3_L : GAFR3_U)) #else #define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) @@ -1319,13 +938,11 @@ typedef void (*ExcpHndlr) (void) ; #endif - /* GPIO alternate function assignments */ -#ifndef CONFIG_CPU_MONAHANS /* Monahans has its different definition */ #define GPIO1_RST 1 /* reset */ #define GPIO6_MMCCLK 6 /* MMC Clock */ -#define GPIO7_48MHz 7 /* 48 MHz clock output */ +#define GPIO8_48MHz 7 /* 48 MHz clock output */ #define GPIO8_MMCCS0 8 /* MMC Chip Select 0 */ #define GPIO9_MMCCS1 9 /* MMC Chip Select 1 */ #define GPIO10_RTCCLK 10 /* real time clock (1 Hz) */ @@ -1349,7 +966,6 @@ typedef void (*ExcpHndlr) (void) ; #define GPIO30_SDATA_OUT 30 /* AC97/I2S Sdata_out */ #define GPIO31_SYNC 31 /* AC97/I2S sync */ #define GPIO32_SDATA_IN1 32 /* AC97 Sdata_in1 */ -#define GPIO32_MMCCLK 32 /* MMC Clock (PXA270) */ #define GPIO33_nCS_5 33 /* chip select 5 */ #define GPIO34_FFRXD 34 /* FFUART receive */ #define GPIO34_MMCCS0 34 /* MMC Chip Select 0 */ @@ -1378,7 +994,6 @@ typedef void (*ExcpHndlr) (void) ; #define GPIO53_MMCCLK 53 /* MMC Clock */ #define GPIO54_MMCCLK 54 /* MMC Clock */ #define GPIO54_pSKTSEL 54 /* Socket Select for Card Space */ -#define GPIO54_nPCE_2 54 /* Card Enable for Card Space (PXA27X) */ #define GPIO55_nPREG 55 /* Card Address bit 26 */ #define GPIO56_nPWAIT 56 /* Wait signal for Card Space */ #define GPIO57_nIOIS16 57 /* Bus Width select for I/O Card Space */ @@ -1413,15 +1028,6 @@ typedef void (*ExcpHndlr) (void) ; #define GPIO78_nCS_2 78 /* chip select 2 */ #define GPIO79_nCS_3 79 /* chip select 3 */ #define GPIO80_nCS_4 80 /* chip select 4 */ -#define GPIO85_nPCE_1 85 /* Card Enable for Card Space (PXA27x) */ -#define GPIO92_MMCDAT0 92 /* MMC DAT0 (PXA27x) */ -#define GPIO109_MMCDAT1 109 /* MMC DAT1 (PXA27x) */ -#define GPIO110_MMCDAT2 110 /* MMC DAT2 (PXA27x) */ -#define GPIO110_MMCCS0 110 /* MMC Chip Select 0 (PXA27x) */ -#define GPIO111_MMCDAT3 111 /* MMC DAT3 (PXA27x) */ -#define GPIO111_MMCCS1 111 /* MMC Chip Select 1 (PXA27x) */ -#define GPIO112_MMCCMD 112 /* MMC CMD (PXA27x) */ -#define GPIO113_AC97_RESET_N 113 /* AC97 NRESET on (PXA27x) */ /* GPIO alternate function mode & direction */ @@ -1439,7 +1045,7 @@ typedef void (*ExcpHndlr) (void) ; #define GPIO1_RTS_MD ( 1 | GPIO_ALT_FN_1_IN) #define GPIO6_MMCCLK_MD ( 6 | GPIO_ALT_FN_1_OUT) -#define GPIO7_48MHz_MD ( 7 | GPIO_ALT_FN_1_OUT) +#define GPIO8_48MHz_MD ( 8 | GPIO_ALT_FN_1_OUT) #define GPIO8_MMCCS0_MD ( 8 | GPIO_ALT_FN_1_OUT) #define GPIO9_MMCCS1_MD ( 9 | GPIO_ALT_FN_1_OUT) #define GPIO10_RTCCLK_MD (10 | GPIO_ALT_FN_1_OUT) @@ -1460,14 +1066,13 @@ typedef void (*ExcpHndlr) (void) ; #define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN) #define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN) #define GPIO28_BITCLK_I2S_MD (28 | GPIO_ALT_FN_2_IN) -#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) +#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) #define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN) #define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT) -#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) +#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) #define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT) #define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT) #define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN) -#define GPIO32_MMCCLK_MD ( 32 | GPIO_ALT_FN_2_OUT) #define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT) #define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN) #define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT) @@ -1483,7 +1088,6 @@ typedef void (*ExcpHndlr) (void) ; #define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT) #define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN) #define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT) -#define GPIO45_SYSCLK_AC97_MD (45 | GPIO_ALT_FN_1_OUT) #define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN) #define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN) #define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT) @@ -1496,7 +1100,6 @@ typedef void (*ExcpHndlr) (void) ; #define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT) #define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT) #define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT) -#define GPIO54_nPCE_2_MD (54 | GPIO_ALT_FN_2_OUT) #define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT) #define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT) #define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN) @@ -1531,99 +1134,14 @@ typedef void (*ExcpHndlr) (void) ; #define GPIO77_LCD_ACBIAS_MD (77 | GPIO_ALT_FN_2_OUT) #define GPIO78_nCS_2_MD (78 | GPIO_ALT_FN_2_OUT) #define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT) -#define GPIO79_pSKTSEL_MD (79 | GPIO_ALT_FN_1_OUT) #define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) -#define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT) -#define GPIO88_USBH1_PWR_MD (88 | GPIO_ALT_FN_1_IN) -#define GPIO89_USBH1_PEN_MD (89 | GPIO_ALT_FN_2_OUT) -#define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT) -#define GPIO109_MMCDAT1_MD (109 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCDAT2_MD (110 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCCS0_MD (110 | GPIO_ALT_FN_1_OUT) -#define GPIO111_MMCDAT3_MD (111 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCCS1_MD (111 | GPIO_ALT_FN_1_OUT) -#define GPIO112_MMCCMD_MD (112 | GPIO_ALT_FN_1_OUT) -#define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT) -#define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_OUT) -#define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN) -#endif +#define GPIO117_SCL (117 | GPIO_ALT_FN_1_OUT) +#define GPIO118_SDA (118 | GPIO_ALT_FN_1_OUT) + /* * Power Manager */ -#ifdef CONFIG_CPU_MONAHANS - -#define ASCR __REG(0x40F40000) /* Application Subsystem Power Status/Control Register */ -#define ARSR __REG(0x40F40004) /* Application Subsystem Reset Status Register */ -#define AD3ER __REG(0x40F40008) /* Application Subsystem D3 state Wakeup Enable Register */ -#define AD3SR __REG(0x40F4000C) /* Application Subsystem D3 state Wakeup Status Register */ -#define AD2D0ER __REG(0x40F40010) /* Application Subsystem D2 to D0 state Wakeup Enable Register */ -#define AD2D0SR __REG(0x40F40014) /* Application Subsystem D2 to D0 state Wakeup Status Register */ -#define AD2D1ER __REG(0x40F40018) /* Application Subsystem D2 to D1 state Wakeup Enable Register */ -#define AD2D1SR __REG(0x40F4001C) /* Application Subsystem D2 to D1 state Wakeup Status Register */ -#define AD1D0ER __REG(0x40F40020) /* Application Subsystem D1 to D0 state Wakeup Enable Register */ -#define AD1D0SR __REG(0x40F40024) /* Application Subsystem D1 to D0 state Wakeup Status Register */ -#define ASDCNT __REG(0x40F40028) /* Application Subsystem SRAM Drowsy Count Register */ -#define AD3R __REG(0x40F40030) /* Application Subsystem D3 State Configuration Register */ -#define AD2R __REG(0x40F40034) /* Application Subsystem D2 State Configuration Register */ -#define AD1R __REG(0x40F40038) /* Application Subsystem D1 State Configuration Register */ - -#define PMCR __REG(0x40F50000) /* Power Manager Control Register */ -#define PSR __REG(0x40F50004) /* Power Manager S2 Status Register */ -#define PSPR __REG(0x40F50008) /* Power Manager Scratch Pad Register */ -#define PCFR __REG(0x40F5000C) /* Power Manager General Configuration Register */ -#define PWER __REG(0x40F50010) /* Power Manager Wake-up Enable Register */ -#define PWSR __REG(0x40F50014) /* Power Manager Wake-up Status Register */ -#define PECR __REG(0x40F50018) /* Power Manager EXT_WAKEUP[1:0] Control Register */ -#define DCDCSR __REG(0x40F50080) /* DC-DC Controller Status Register */ -#define PVCR __REG(0x40F50100) /* Power Manager Voltage Change Control Register */ -#define PCMD(x) __REG(0x40F50110 + x*4) -#define PCMD0 __REG(0x40F50110 + 0 * 4) -#define PCMD1 __REG(0x40F50110 + 1 * 4) -#define PCMD2 __REG(0x40F50110 + 2 * 4) -#define PCMD3 __REG(0x40F50110 + 3 * 4) -#define PCMD4 __REG(0x40F50110 + 4 * 4) -#define PCMD5 __REG(0x40F50110 + 5 * 4) -#define PCMD6 __REG(0x40F50110 + 6 * 4) -#define PCMD7 __REG(0x40F50110 + 7 * 4) -#define PCMD8 __REG(0x40F50110 + 8 * 4) -#define PCMD9 __REG(0x40F50110 + 9 * 4) -#define PCMD10 __REG(0x40F50110 + 10 * 4) -#define PCMD11 __REG(0x40F50110 + 11 * 4) -#define PCMD12 __REG(0x40F50110 + 12 * 4) -#define PCMD13 __REG(0x40F50110 + 13 * 4) -#define PCMD14 __REG(0x40F50110 + 14 * 4) -#define PCMD15 __REG(0x40F50110 + 15 * 4) -#define PCMD16 __REG(0x40F50110 + 16 * 4) -#define PCMD17 __REG(0x40F50110 + 17 * 4) -#define PCMD18 __REG(0x40F50110 + 18 * 4) -#define PCMD19 __REG(0x40F50110 + 19 * 4) -#define PCMD20 __REG(0x40F50110 + 20 * 4) -#define PCMD21 __REG(0x40F50110 + 21 * 4) -#define PCMD22 __REG(0x40F50110 + 22 * 4) -#define PCMD23 __REG(0x40F50110 + 23 * 4) -#define PCMD24 __REG(0x40F50110 + 24 * 4) -#define PCMD25 __REG(0x40F50110 + 25 * 4) -#define PCMD26 __REG(0x40F50110 + 26 * 4) -#define PCMD27 __REG(0x40F50110 + 27 * 4) -#define PCMD28 __REG(0x40F50110 + 28 * 4) -#define PCMD29 __REG(0x40F50110 + 29 * 4) -#define PCMD30 __REG(0x40F50110 + 30 * 4) -#define PCMD31 __REG(0x40F50110 + 31 * 4) - -#define PCMD_MBC (1<<12) -#define PCMD_DCE (1<<11) -#define PCMD_LC (1<<10) -#define PCMD_SQC (3<<8) /* only 00 and 01 are valid */ - -#define PVCR_FVC (0x1 << 28) -#define PVCR_VCSA (0x1<<14) -#define PVCR_CommandDelay (0xf80) -#define PVCR_ReadPointer (0x01f00000) -#define PVCR_SlaveAddress (0x7f) - -#else - #define PMCR __REG(0x40F00000) /* Power Manager Control Register */ #define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */ #define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */ @@ -1638,55 +1156,57 @@ typedef void (*ExcpHndlr) (void) ; #define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */ #define RCSR __REG(0x40F00030) /* Reset Controller Status Register */ -#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */ -#define PSTR __REG(0x40F00038) /*Power Manager Standby Config Register */ -#define PSNR __REG(0x40F0003C) /*Power Manager Sense Config Register */ -#define PVCR __REG(0x40F00040) /*Power Manager VoltageControl Register */ -#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */ -#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */ -#define PCMD(x) __REG2(0x40F00080, (x)<<2) -#define PCMD0 __REG(0x40F00080 + 0 * 4) -#define PCMD1 __REG(0x40F00080 + 1 * 4) -#define PCMD2 __REG(0x40F00080 + 2 * 4) -#define PCMD3 __REG(0x40F00080 + 3 * 4) -#define PCMD4 __REG(0x40F00080 + 4 * 4) -#define PCMD5 __REG(0x40F00080 + 5 * 4) -#define PCMD6 __REG(0x40F00080 + 6 * 4) -#define PCMD7 __REG(0x40F00080 + 7 * 4) -#define PCMD8 __REG(0x40F00080 + 8 * 4) -#define PCMD9 __REG(0x40F00080 + 9 * 4) -#define PCMD10 __REG(0x40F00080 + 10 * 4) -#define PCMD11 __REG(0x40F00080 + 11 * 4) -#define PCMD12 __REG(0x40F00080 + 12 * 4) -#define PCMD13 __REG(0x40F00080 + 13 * 4) -#define PCMD14 __REG(0x40F00080 + 14 * 4) -#define PCMD15 __REG(0x40F00080 + 15 * 4) -#define PCMD16 __REG(0x40F00080 + 16 * 4) -#define PCMD17 __REG(0x40F00080 + 17 * 4) -#define PCMD18 __REG(0x40F00080 + 18 * 4) -#define PCMD19 __REG(0x40F00080 + 19 * 4) -#define PCMD20 __REG(0x40F00080 + 20 * 4) -#define PCMD21 __REG(0x40F00080 + 21 * 4) -#define PCMD22 __REG(0x40F00080 + 22 * 4) -#define PCMD23 __REG(0x40F00080 + 23 * 4) -#define PCMD24 __REG(0x40F00080 + 24 * 4) -#define PCMD25 __REG(0x40F00080 + 25 * 4) -#define PCMD26 __REG(0x40F00080 + 26 * 4) -#define PCMD27 __REG(0x40F00080 + 27 * 4) -#define PCMD28 __REG(0x40F00080 + 28 * 4) -#define PCMD29 __REG(0x40F00080 + 29 * 4) -#define PCMD30 __REG(0x40F00080 + 30 * 4) -#define PCMD31 __REG(0x40F00080 + 31 * 4) - -#define PCMD_MBC (1<<12) -#define PCMD_DCE (1<<11) -#define PCMD_LC (1<<10) +#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */ +#define PSTR __REG(0x40F00038) /* Power Manager Standby Config Register */ +#define PSNR __REG(0x40F0003C) /* Power Manager Sense Config Register */ +#define PVCR __REG(0x40F00040) /* Power Manager VoltageControl Register */ +#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */ +#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */ +#define PCMD(x) __REG(0x40F00080 + x*4) +#define PCMD0 __REG(0x40F00080 + 0 * 4) +#define PCMD1 __REG(0x40F00080 + 1 * 4) +#define PCMD2 __REG(0x40F00080 + 2 * 4) +#define PCMD3 __REG(0x40F00080 + 3 * 4) +#define PCMD4 __REG(0x40F00080 + 4 * 4) +#define PCMD5 __REG(0x40F00080 + 5 * 4) +#define PCMD6 __REG(0x40F00080 + 6 * 4) +#define PCMD7 __REG(0x40F00080 + 7 * 4) +#define PCMD8 __REG(0x40F00080 + 8 * 4) +#define PCMD9 __REG(0x40F00080 + 9 * 4) +#define PCMD10 __REG(0x40F00080 + 10 * 4) +#define PCMD11 __REG(0x40F00080 + 11 * 4) +#define PCMD12 __REG(0x40F00080 + 12 * 4) +#define PCMD13 __REG(0x40F00080 + 13 * 4) +#define PCMD14 __REG(0x40F00080 + 14 * 4) +#define PCMD15 __REG(0x40F00080 + 15 * 4) +#define PCMD16 __REG(0x40F00080 + 16 * 4) +#define PCMD17 __REG(0x40F00080 + 17 * 4) +#define PCMD18 __REG(0x40F00080 + 18 * 4) +#define PCMD19 __REG(0x40F00080 + 19 * 4) +#define PCMD20 __REG(0x40F00080 + 20 * 4) +#define PCMD21 __REG(0x40F00080 + 21 * 4) +#define PCMD22 __REG(0x40F00080 + 22 * 4) +#define PCMD23 __REG(0x40F00080 + 23 * 4) +#define PCMD24 __REG(0x40F00080 + 24 * 4) +#define PCMD25 __REG(0x40F00080 + 25 * 4) +#define PCMD26 __REG(0x40F00080 + 26 * 4) +#define PCMD27 __REG(0x40F00080 + 27 * 4) +#define PCMD28 __REG(0x40F00080 + 28 * 4) +#define PCMD29 __REG(0x40F00080 + 29 * 4) +#define PCMD30 __REG(0x40F00080 + 30 * 4) +#define PCMD31 __REG(0x40F00080 + 31 * 4) + +#define PCMD_MBC (1<<12) +#define PCMD_DCE (1<<11) +#define PCMD_LC (1<<10) /* FIXME: PCMD_SQC need be checked. */ -#define PCMD_SQC (3<<8) /* currently only bit 8 is changeable, - bit 9 should be 0 all day. */ -#define PVCR_VCSA (0x1<<14) -#define PVCR_CommandDelay (0xf80) -#define PCFR_PI2C_EN (0x1 << 6) +#define PCMD_SQC (3<<8) /* currently only bit 8 is changerable, */ + /* bit 9 should be 0 all day. */ +#define PVCR_VCSA (0x1<<14) +#define PVCR_CommandDelay (0xf80) +/* define MACRO for Power Manager General Configuration Register (PCFR) */ +#define PCFR_FVC (0x1 << 10) +#define PCFR_PI2C_EN (0x1 << 6) #define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */ #define PSSR_RDH (1 << 5) /* Read Disable Hold */ @@ -1695,13 +1215,6 @@ typedef void (*ExcpHndlr) (void) ; #define PSSR_BFS (1 << 1) /* Battery Fault Status */ #define PSSR_SSS (1 << 0) /* Software Sleep Status */ -#define PCFR_RO (1 << 15) /* RDH Override */ -#define PCFR_PO (1 << 14) /* PH Override */ -#define PCFR_GPROD (1 << 12) /* GPIO nRESET_OUT Disable */ -#define PCFR_L1_EN (1 << 11) /* Sleep Mode L1 converter Enable */ -#define PCFR_FVC (1 << 10) /* Frequency/Voltage Change */ -#define PCFR_DC_EN (1 << 7) /* Sleep/deep-sleep DC-DC Converter Enable */ -#define PCFR_PI2CEN (1 << 6) /* Enable PI2C controller */ #define PCFR_DS (1 << 3) /* Deep Sleep Mode */ #define PCFR_FS (1 << 2) /* Float Static Chip Selects */ #define PCFR_FP (1 << 1) /* Float PCMCIA controls */ @@ -1711,52 +1224,19 @@ typedef void (*ExcpHndlr) (void) ; #define RCSR_SMR (1 << 2) /* Sleep Mode */ #define RCSR_WDR (1 << 1) /* Watchdog Reset */ #define RCSR_HWR (1 << 0) /* Hardware Reset */ -#endif /* CONFIG_CPU_MONAHANS */ /* * SSP Serial Port Registers */ - #define SSCR0 __REG(0x41000000) /* SSP Control Register 0 */ #define SSCR1 __REG(0x41000004) /* SSP Control Register 1 */ #define SSSR __REG(0x41000008) /* SSP Status Register */ #define SSITR __REG(0x4100000C) /* SSP Interrupt Test Register */ #define SSDR __REG(0x41000010) /* (Write / Read) SSP Data Write Register/SSP Data Read Register */ -#define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */ -#define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */ -#define SSCR0_FRF (0x00000030) /* FRame Format (mask) */ -#define SSCR0_Motorola (0x0 << 4) /* Motorola's Serial Peripheral Interface (SPI) */ -#define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial Protocol (SSP) */ -#define SSCR0_National (0x2 << 4) /* National Microwire */ -#define SSCR0_ECS (1 << 6) /* External clock select */ -#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */ -#define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */ -#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */ - -#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */ -#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */ -#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */ -#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */ -#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */ -#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */ -#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */ -#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */ -#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */ -#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */ - -#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */ -#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */ -#define SSSR_BSY (1 << 4) /* SSP Busy */ -#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */ -#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */ -#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */ - - /* * MultiMediaCard (MMC) controller */ - #define MMC_STRPCL __REG(0x41100000) /* Control to start and stop MMC clock */ #define MMC_STAT __REG(0x41100004) /* MMC Status Register (read only) */ #define MMC_CLKRT __REG(0x41100008) /* MMC clock rate */ @@ -1777,101 +1257,18 @@ typedef void (*ExcpHndlr) (void) ; #define MMC_TXFIFO __REG(0x41100044) /* Transmit FIFO (write only) */ /* - * MultiMediaCard (MMC2) controller - */ - -#define MMC2_STRPCL __REG_2(0x42000000) /* Control to start and stop MMC clock */ -#define MMC2_STAT __REG_2(0x42000004) /* MMC Status Register (read only) */ -#define MMC2_CLKRT __REG_2(0x42000008) /* MMC clock rate */ -#define MMC2_SPI __REG_2(0x4200000c) /* SPI mode control bits */ -#define MMC2_CMDAT __REG_2(0x42000010) /* Command/response/data sequence control */ -#define MMC2_RESTO __REG_2(0x42000014) /* Expected response time out */ -#define MMC2_RDTO __REG_2(0x42000018) /* Expected data read time out */ -#define MMC2_BLKLEN __REG_2(0x4200001c) /* Block length of data transaction */ -#define MMC2_NOB __REG_2(0x42000020) /* Number of blocks, for block mode */ -#define MMC2_PRTBUF __REG_2(0x42000024) /* Partial MMC_TXFIFO FIFO written */ -#define MMC2_I_MASK __REG_2(0x42000028) /* Interrupt Mask */ -#define MMC2_I_REG __REG_2(0x4200002c) /* Interrupt Register (read only) */ -#define MMC2_CMD __REG_2(0x42000030) /* Index of current command */ -#define MMC2_ARGH __REG_2(0x42000034) /* MSW part of the current command argument */ -#define MMC2_ARGL __REG_2(0x42000038) /* LSW part of the current command argument */ -#define MMC2_RES __REG_2(0x4200003c) /* Response FIFO (read only) */ -#define MMC2_RXFIFO __REG_2(0x42000040) /* Receive FIFO (read only) */ -#define MMC2_TXFIFO __REG_2(0x42000044) /* Transmit FIFO (write only) */ - -/* * Core Clock */ -#if defined(CONFIG_CPU_MONAHANS) -#define ACCR __REG(0x41340000) /* Application Subsystem Clock Configuration Register */ -#define ACSR __REG(0x41340004) /* Application Subsystem Clock Status Register */ -#define AICSR __REG(0x41340008) /* Application Subsystem Interrupt Control/Status Register */ -#define CKENA __REG(0x4134000C) /* A Clock Enable Register */ -#define CKENB __REG(0x41340010) /* B Clock Enable Register */ -#define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */ - -#define ACCR_SMC_MASK 0x03800000 /* Static Memory Controller Frequency Select */ -#define ACCR_SRAM_MASK 0x000c0000 /* SRAM Controller Frequency Select */ -#define ACCR_FC_MASK 0x00030000 /* Frequency Change Frequency Select */ -#define ACCR_HSIO_MASK 0x0000c000 /* High Speed IO Frequency Select */ -#define ACCR_DDR_MASK 0x00003000 /* DDR Memory Controller Frequency Select */ -#define ACCR_XN_MASK 0x00000700 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ -#define ACCR_XL_MASK 0x0000001f /* Crystal Frequency to Memory Frequency Multiplier */ -#define ACCR_XPDIS (1 << 31) -#define ACCR_SPDIS (1 << 30) -#define ACCR_13MEND1 (1 << 27) -#define ACCR_D0CS (1 << 26) -#define ACCR_13MEND2 (1 << 21) -#define ACCR_PCCE (1 << 11) - -#define CKENA_30_MSL0 (1 << 30) /* MSL0 Interface Unit Clock Enable */ -#define CKENA_29_SSP4 (1 << 29) /* SSP3 Unit Clock Enable */ -#define CKENA_28_SSP3 (1 << 28) /* SSP2 Unit Clock Enable */ -#define CKENA_27_SSP2 (1 << 27) /* SSP1 Unit Clock Enable */ -#define CKENA_26_SSP1 (1 << 26) /* SSP0 Unit Clock Enable */ -#define CKENA_25_TSI (1 << 25) /* TSI Clock Enable */ -#define CKENA_24_AC97 (1 << 24) /* AC97 Unit Clock Enable */ -#define CKENA_23_STUART (1 << 23) /* STUART Unit Clock Enable */ -#define CKENA_22_FFUART (1 << 22) /* FFUART Unit Clock Enable */ -#define CKENA_21_BTUART (1 << 21) /* BTUART Unit Clock Enable */ -#define CKENA_20_UDC (1 << 20) /* UDC Clock Enable */ -#define CKENA_19_TPM (1 << 19) /* TPM Unit Clock Enable */ -#define CKENA_18_USIM1 (1 << 18) /* USIM1 Unit Clock Enable */ -#define CKENA_17_USIM0 (1 << 17) /* USIM0 Unit Clock Enable */ -#define CKENA_15_CIR (1 << 15) /* Consumer IR Clock Enable */ -#define CKENA_14_KEY (1 << 14) /* Keypad Controller Clock Enable */ -#define CKENA_13_MMC1 (1 << 13) /* MMC1 Clock Enable */ -#define CKENA_12_MMC0 (1 << 12) /* MMC0 Clock Enable */ -#define CKENA_11_FLASH (1 << 11) /* Boot ROM Clock Enable */ -#define CKENA_10_SRAM (1 << 10) /* SRAM Controller Clock Enable */ -#define CKENA_9_SMC (1 << 9) /* Static Memory Controller */ -#define CKENA_8_DMC (1 << 8) /* Dynamic Memory Controller */ -#define CKENA_7_GRAPHICS (1 << 7) /* 2D Graphics Clock Enable */ -#define CKENA_6_USBCLI (1 << 6) /* USB Client Unit Clock Enable */ -#define CKENA_4_NAND (1 << 4) /* NAND Flash Controller Clock Enable */ -#define CKENA_3_CAMERA (1 << 3) /* Camera Interface Clock Enable */ -#define CKENA_2_USBHOST (1 << 2) /* USB Host Unit Clock Enable */ -#define CKENA_1_LCD (1 << 1) /* LCD Unit Clock Enable */ - -#define CKENB_8_1WIRE ((1 << 8) + 32) /* One Wire Interface Unit Clock Enable */ -#define CKENB_7_GPIO ((1 << 7) + 32) /* GPIO Clock Enable */ -#define CKENB_6_IRQ ((1 << 6) + 32) /* Interrupt Controller Clock Enable */ -#define CKENB_4_I2C ((1 << 4) + 32) /* I2C Unit Clock Enable */ -#define CKENB_1_PWM1 ((1 << 1) + 32) /* PWM2 & PWM3 Clock Enable */ -#define CKENB_0_PWM0 ((1 << 0) + 32) /* PWM0 & PWM1 Clock Enable */ - -#else /* if defined CONFIG_CPU_MONAHANS */ - #define CCCR __REG(0x41300000) /* Core Clock Configuration Register */ #define CKEN __REG(0x41300004) /* Clock Enable Register */ #define OSCC __REG(0x41300008) /* Oscillator Configuration Register */ -#define CCSR __REG(0x4130000C) /* Core Clock Status Register */ #define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ +#if !defined(CONFIG_PXA27X) #define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ +#endif #define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ -#define CKEN31_AC97 (1 << 31) #define CKEN24_CAMERA (1 << 24) /* Camera Interface Clock Enable */ #define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */ #define CKEN22_MEMC (1 << 22) /* Memory Controller Clock Enable */ @@ -1886,15 +1283,15 @@ typedef void (*ExcpHndlr) (void) ; #define CKEN13_FICP (1 << 13) /* FICP Unit Clock Enable */ #define CKEN12_MMC (1 << 12) /* MMC Unit Clock Enable */ #define CKEN11_USB (1 << 11) /* USB Unit Clock Enable */ +#if defined(CONFIG_PXA27X) #define CKEN10_USBHOST (1 << 10) /* USB Host Unit Clock Enable */ -#define CKEN9_OSTIMER (1 << 9) /* OS Timer Unit Clock Enable */ +#define CKEN24_CAMERA (1 << 24) /* Camera Unit Clock Enable */ +#endif #define CKEN8_I2S (1 << 8) /* I2S Unit Clock Enable */ #define CKEN7_BTUART (1 << 7) /* BTUART Unit Clock Enable */ #define CKEN6_FFUART (1 << 6) /* FFUART Unit Clock Enable */ #define CKEN5_STUART (1 << 5) /* STUART Unit Clock Enable */ -#define CKEN4_SSP3 (1 << 4) /* SSP3 Unit Clock Enable */ #define CKEN3_SSP (1 << 3) /* SSP Unit Clock Enable */ -#define CKEN3_SSP2 (1 << 3) /* SSP2 Unit Clock Enable */ #define CKEN2_AC97 (1 << 2) /* AC97 Unit Clock Enable */ #define CKEN1_PWM1 (1 << 1) /* PWM1 Clock Enable */ #define CKEN0_PWM0 (1 << 0) /* PWM0 Clock Enable */ @@ -1903,54 +1300,39 @@ typedef void (*ExcpHndlr) (void) ; #define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */ #if !defined(CONFIG_PXA27X) -#define CCCR_L09 (0x1F) -#define CCCR_L27 (0x1) -#define CCCR_L32 (0x2) -#define CCCR_L36 (0x3) -#define CCCR_L40 (0x4) -#define CCCR_L45 (0x5) - -#define CCCR_M1 (0x1 << 5) -#define CCCR_M2 (0x2 << 5) -#define CCCR_M4 (0x3 << 5) - -#define CCCR_N10 (0x2 << 7) -#define CCCR_N15 (0x3 << 7) -#define CCCR_N20 (0x4 << 7) -#define CCCR_N25 (0x5 << 7) -#define CCCR_N30 (0x6 << 7) +#define CCCR_L09 (0x1F) +#define CCCR_L27 (0x1) +#define CCCR_L32 (0x2) +#define CCCR_L36 (0x3) +#define CCCR_L40 (0x4) +#define CCCR_L45 (0x5) + +#define CCCR_M1 (0x1 << 5) +#define CCCR_M2 (0x2 << 5) +#define CCCR_M4 (0x3 << 5) + +#define CCCR_N10 (0x2 << 7) +#define CCCR_N15 (0x3 << 7) +#define CCCR_N20 (0x4 << 7) +#define CCCR_N25 (0x5 << 7) +#define CCCR_N30 (0x6 << 7) #endif -#endif /* CONFIG_CPU_MONAHANS */ - /* * LCD */ -#ifndef CONFIG_CPU_MONAHANS - #define LCCR0 __REG(0x44000000) /* LCD Controller Control Register 0 */ #define LCCR1 __REG(0x44000004) /* LCD Controller Control Register 1 */ #define LCCR2 __REG(0x44000008) /* LCD Controller Control Register 2 */ #define LCCR3 __REG(0x4400000C) /* LCD Controller Control Register 3 */ #define DFBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */ #define DFBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */ -#define LCSR __REG(0x44000038) /* LCD Controller Status Register */ #define LCSR0 __REG(0x44000038) /* LCD Controller Status Register */ #define LCSR1 __REG(0x44000034) /* LCD Controller Status Register */ #define LIIDR __REG(0x4400003C) /* LCD Controller Interrupt ID Register */ #define TMEDRGBR __REG(0x44000040) /* TMED RGB Seed Register */ #define TMEDCR __REG(0x44000044) /* TMED Control Register */ -#define LCCR3_1BPP (0 << 24) -#define LCCR3_2BPP (1 << 24) -#define LCCR3_4BPP (2 << 24) -#define LCCR3_8BPP (3 << 24) -#define LCCR3_16BPP (4 << 24) -#define LCCR3_18BPP (6 << 24) /* packed pixel format */ -#define LCCR3_19BPP (8 << 24) /* packed pixel format */ -#define LCCR3_24BPP (9 << 24) -#define LCCR3_25BPP (10<< 24) - #define FDADR0 __REG(0x44000200) /* DMA Channel 0 Frame Descriptor Address Register */ #define FSADR0 __REG(0x44000204) /* DMA Channel 0 Frame Source Address Register */ #define FIDR0 __REG(0x44000208) /* DMA Channel 0 Frame ID Register */ @@ -1960,116 +1342,71 @@ typedef void (*ExcpHndlr) (void) ; #define FIDR1 __REG(0x44000218) /* DMA Channel 1 Frame ID Register */ #define LDCMD1 __REG(0x4400021C) /* DMA Channel 1 Command Register */ -#else - -#define LCCR0 __REG_2(0x44000000) /* LCD Controller Control Register 0 */ -#define LCCR1 __REG_2(0x44000004) /* LCD Controller Control Register 1 */ -#define LCCR2 __REG_2(0x44000008) /* LCD Controller Control Register 2 */ -#define LCCR3 __REG_2(0x4400000C) /* LCD Controller Control Register 3 */ -#define DFBR0 __REG_2(0x44000020) /* DMA Channel 0 Frame Branch Register */ -#define DFBR1 __REG_2(0x44000024) /* DMA Channel 1 Frame Branch Register */ -#define LCSR __REG_2(0x44000038) /* LCD Controller Status Register */ -#define LCSR1 __REG_2(0x44000034) /* LCD Controller Status Register */ -#define LIIDR __REG_2(0x4400003C) /* LCD Controller Interrupt ID Register */ -#define TMEDRGBR __REG_2(0x44000040) /* TMED RGB Seed Register */ -#define TMEDCR __REG_2(0x44000044) /* TMED Control Register */ - -#define LCCR3_1BPP (0 << 24) -#define LCCR3_2BPP (1 << 24) -#define LCCR3_4BPP (2 << 24) -#define LCCR3_8BPP (3 << 24) -#define LCCR3_16BPP (4 << 24) -#define LCCR3_18BPP (6 << 24) /* packed pixel format */ -#define LCCR3_19BPP (8 << 24) /* packed pixel format */ -#define LCCR3_24BPP (9 << 24) -#define LCCR3_25BPP (10<< 24) - -#define FDADR0 __REG_2(0x44000200) /* DMA Channel 0 Frame Descriptor Address Register */ -#define FSADR0 __REG_2(0x44000204) /* DMA Channel 0 Frame Source Address Register */ -#define FIDR0 __REG_2(0x44000208) /* DMA Channel 0 Frame ID Register */ -#define LDCMD0 __REG_2(0x4400020C) /* DMA Channel 0 Command Register */ -#define FDADR1 __REG_2(0x44000210) /* DMA Channel 1 Frame Descriptor Address Register */ -#define FSADR1 __REG_2(0x44000214) /* DMA Channel 1 Frame Source Address Register */ -#define FIDR1 __REG_2(0x44000218) /* DMA Channel 1 Frame ID Register */ -#define LDCMD1 __REG_2(0x4400021C) /* DMA Channel 1 Command Register */ - -#endif - #define LCCR0_ENB (1 << 0) /* LCD Controller enable */ -#define LCCR0_CMS (1 << 1) /* Color/Monochrome Display Select */ -#define LCCR0_Color (LCCR0_CMS*0) /* Color display */ -#define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */ -#define LCCR0_SDS (1 << 2) /* Single/Dual Panel Display */ - /* Select */ -#define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */ -#define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */ - +#define LCCR0_CMS (1 << 1) /* Color = 0, Monochrome = 1 */ +#define LCCR0_SDS (1 << 2) /* Single Panel = 0, Dual Panel = 1 */ #define LCCR0_LDM (1 << 3) /* LCD Disable Done Mask */ #define LCCR0_SFM (1 << 4) /* Start of frame mask */ #define LCCR0_IUM (1 << 5) /* Input FIFO underrun mask */ #define LCCR0_EFM (1 << 6) /* End of Frame mask */ -#define LCCR0_PAS (1 << 7) /* Passive/Active display Select */ -#define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */ -#define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */ -#define LCCR0_DPD (1 << 9) /* Double Pixel Data (monochrome */ - /* display mode) */ -#define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome */ - /* display */ -#define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome */ - /* display */ +#define LCCR0_PAS (1 << 7) /* Passive = 0, Active = 1 */ +#define LCCR0_BLE (1 << 8) /* Little Endian = 0, Big Endian = 1 */ +#define LCCR0_DPD (1 << 9) /* Double Pixel mode, 4 pixel value = 0, 8 pixle values = 1 */ #define LCCR0_DIS (1 << 10) /* LCD Disable */ #define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */ #define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */ #define LCCR0_PDD_S 12 -#define LCCR0_BM (1 << 20) /* Branch mask */ +#define LCCR0_BM (1 << 20) /* Branch mask */ #define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */ -#define LCCR0_LCDT (1 << 22) /* LCD Panel Type */ -#define LCCR0_RDSTM (1 << 23) /* Read Status Interrupt Mask */ -#define LCCR0_CMDIM (1 << 24) /* Command Interrupt Mask */ - -#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */ -#define LCCR1_DisWdth(Pixel) /* Display Width [1..800 pix.] */ \ - (((Pixel) - 1) << FShft (LCCR1_PPL)) - -#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */ -#define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \ - /* pulse Width [1..64 Tpix] */ \ - (((Tpix) - 1) << FShft (LCCR1_HSW)) - -#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */ - /* count - 1 [Tpix] */ -#define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \ - /* [1..256 Tpix] */ \ - (((Tpix) - 1) << FShft (LCCR1_ELW)) - -#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */ - /* Wait count - 1 [Tpix] */ -#define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \ - /* [1..256 Tpix] */ \ - (((Tpix) - 1) << FShft (LCCR1_BLW)) - - -#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */ -#define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \ - (((Line) - 1) << FShft (LCCR2_LPP)) - -#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */ - /* Width - 1 [Tln] (L_FCLK) */ -#define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \ - /* Width [1..64 Tln] */ \ - (((Tln) - 1) << FShft (LCCR2_VSW)) - -#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */ - /* count [Tln] */ -#define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \ - /* [0..255 Tln] */ \ - ((Tln) << FShft (LCCR2_EFW)) - -#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */ - /* Wait count [Tln] */ -#define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \ - /* [0..255 Tln] */ \ - ((Tln) << FShft (LCCR2_BFW)) +#if defined(CONFIG_PXA27X) +#define LCCR0_LCDT (1 << 22) /* LCD Panel Type */ +#define LCCR0_RDSTM (1 << 23) /* Read Status Interrupt Mask */ +#define LCCR0_CMDIM (1 << 24) /* Command Interrupt Mask */ +#endif + +#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */ +#define LCCR1_DisWdth(Pixel) /* Display Width [1..800 pix.] */ \ + (((Pixel) - 1) << FShft (LCCR1_PPL)) + +#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */ +#define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \ + /* pulse Width [1..64 Tpix] */ \ + (((Tpix) - 1) << FShft (LCCR1_HSW)) + +#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */ + /* count - 1 [Tpix] */ +#define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \ + /* [1..256 Tpix] */ \ + (((Tpix) - 1) << FShft (LCCR1_ELW)) + +#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */ + /* Wait count - 1 [Tpix] */ +#define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \ + /* [1..256 Tpix] */ \ + (((Tpix) - 1) << FShft (LCCR1_BLW)) + + +#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */ +#define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \ + (((Line) - 1) << FShft (LCCR2_LPP)) + +#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */ + /* Width - 1 [Tln] (L_FCLK) */ +#define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \ + /* Width [1..64 Tln] */ \ + (((Tln) - 1) << FShft (LCCR2_VSW)) + +#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */ + /* count [Tln] */ +#define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \ + /* [0..255 Tln] */ \ + ((Tln) << FShft (LCCR2_EFW)) + +#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */ + /* Wait count [Tln] */ +#define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \ + /* [0..255 Tln] */ \ + ((Tln) << FShft (LCCR2_BFW)) #if 0 #define LCCR3_PCD (0xff) /* Pixel clock divisor */ @@ -2081,73 +1418,54 @@ typedef void (*ExcpHndlr) (void) ; #define LCCR3_API_S 16 #define LCCR3_VSP (1 << 20) /* vertical sync polarity */ #define LCCR3_HSP (1 << 21) /* horizontal sync polarity */ -#define LCCR3_PCP (1 << 22) /* Pixel Clock Polarity (L_PCLK) */ -#define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */ -#define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */ - -#define LCCR3_OEP (1 << 23) /* Output Enable Polarity (L_BIAS, */ - /* active display mode) */ -#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */ -#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */ - +#define LCCR3_PCP (1 << 22) /* pixel clock polarity */ +#define LCCR3_OEP (1 << 23) /* output enable polarity */ #if 0 #define LCCR3_BPP (7 << 24) /* bits per pixel */ #define LCCR3_BPP_S 24 #endif #define LCCR3_DPC (1 << 27) /* double pixel clock mode */ +#define LCCR3_PDFOR_0 (0 << 30) +#define LCCR3_PDFOR_1 (1 << 30) +#define LCCR3_PDFOR_2 (2 << 30) +#define LCCR3_PDFOR_3 (3 << 30) -#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */ -#define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor */ \ - (((Div) << FShft (LCCR3_PCD))) - - -#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */ -#define LCCR3_Bpp(Bpp) /* Bit Per Pixel */ \ - (((Bpp) << FShft (LCCR3_BPP))) -#define LCCR3_ACB Fld (8, 8) /* AC Bias */ -#define LCCR3_Acb(Acb) /* BAC Bias */ \ - (((Acb) << FShft (LCCR3_ACB))) +#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */ +#define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor */ \ + (((Div) << FShft (LCCR3_PCD))) -#define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */ - /* pulse active High */ -#define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */ -#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */ - /* active High */ -#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */ - /* active Low */ +#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */ +#define LCCR3_Bpp(Bpp) /* Bit Per Pixel */ \ + ((((Bpp&0x7) << FShft (LCCR3_BPP)))|(((Bpp&0x8)<<26))) -#define LCSR_LDD (1 << 0) /* LCD Disable Done */ -#define LCSR_SOF (1 << 1) /* Start of frame */ -#define LCSR_BER (1 << 2) /* Bus error */ -#define LCSR_ABC (1 << 3) /* AC Bias count */ -#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */ -#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */ -#define LCSR_OU (1 << 6) /* output FIFO underrun */ -#define LCSR_QD (1 << 7) /* quick disable */ -#define LCSR_EOF (1 << 8) /* end of frame */ -#define LCSR_BS (1 << 9) /* branch status */ -#define LCSR_SINT (1 << 10) /* subsequent interrupt */ +#define LCCR3_ACB Fld (8, 8) /* AC Bias */ +#define LCCR3_Acb(Acb) /* BAC Bias */ \ + (((Acb) << FShft (LCCR3_ACB))) -#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ +#define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */ + /* pulse active High */ +#define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */ -#define LCSR_LDD (1 << 0) /* LCD Disable Done */ -#define LCSR_SOF (1 << 1) /* Start of frame */ -#define LCSR_BER (1 << 2) /* Bus error */ -#define LCSR_ABC (1 << 3) /* AC Bias count */ -#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */ -#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */ -#define LCSR_OU (1 << 6) /* output FIFO underrun */ -#define LCSR_QD (1 << 7) /* quick disable */ -#define LCSR_EOF (1 << 8) /* end of frame */ -#define LCSR_BS (1 << 9) /* branch status */ -#define LCSR_SINT (1 << 10) /* subsequent interrupt */ +#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */ + /* active High */ +#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */ + /* active Low */ -#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ +#define LCSR0_LDD (1 << 0) /* LCD Disable Done */ +#define LCSR0_SOF (1 << 1) /* Start of frame */ +#define LCSR0_BER (1 << 2) /* Bus error */ +#define LCSR0_ABC (1 << 3) /* AC Bias count */ +#define LCSR0_IUL (1 << 4) /* input FIFO underrun Lower panel */ +#define LCSR0_IUU (1 << 5) /* input FIFO underrun Upper panel */ +#define LCSR0_OU (1 << 6) /* output FIFO underrun */ +#define LCSR0_QD (1 << 7) /* quick disable */ +#define LCSR0_EOF0 (1 << 8) /* end of frame */ +#define LCSR0_BS (1 << 9) /* branch status */ +#define LCSR0_SINT (1 << 10) /* subsequent interrupt */ -/* Overlay1 & Overlay2 & Hardware Cursor */ #define LCSR1_SOF1 (1 << 0) #define LCSR1_SOF2 (1 << 1) #define LCSR1_SOF3 (1 << 2) @@ -2175,219 +1493,41 @@ typedef void (*ExcpHndlr) (void) ; #define LCSR1_IU5 (1 << 28) #define LCSR1_IU6 (1 << 29) +#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ +#if defined(CONFIG_PXA27X) #define LDCMD_SOFINT (1 << 22) #define LDCMD_EOFINT (1 << 21) - -#define LCCR0_LDDALT (1<<26) /* LDD Alternate mapping bit when base pixel is RGBT16 */ -#define LCCR0_OUC (1<<25) /* Overlay Underlay Control Bit */ - -#define LCCR5_SOFM1 (1<<0) /* Start Of Frame Mask for Overlay 1 (channel 1) */ -#define LCCR5_SOFM2 (1<<1) /* Start Of Frame Mask for Overlay 2 (channel 2) */ -#define LCCR5_SOFM3 (1<<2) /* Start Of Frame Mask for Overlay 2 (channel 3) */ -#define LCCR5_SOFM4 (1<<3) /* Start Of Frame Mask for Overlay 2 (channel 4) */ -#define LCCR5_SOFM5 (1<<4) /* Start Of Frame Mask for cursor (channel 5) */ -#define LCCR5_SOFM6 (1<<5) /* Start Of Frame Mask for command data (channel 6) */ - -#define LCCR5_EOFM1 (1<<8) /* End Of Frame Mask for Overlay 1 (channel 1) */ -#define LCCR5_EOFM2 (1<<9) /* End Of Frame Mask for Overlay 2 (channel 2) */ -#define LCCR5_EOFM3 (1<<10) /* End Of Frame Mask for Overlay 2 (channel 3) */ -#define LCCR5_EOFM4 (1<<11) /* End Of Frame Mask for Overlay 2 (channel 4) */ -#define LCCR5_EOFM5 (1<<12) /* End Of Frame Mask for cursor (channel 5) */ -#define LCCR5_EOFM6 (1<<13) /* End Of Frame Mask for command data (channel 6) */ - -#define LCCR5_BSM1 (1<<16) /* Branch mask for Overlay 1 (channel 1) */ -#define LCCR5_BSM2 (1<<17) /* Branch mask for Overlay 2 (channel 2) */ -#define LCCR5_BSM3 (1<<18) /* Branch mask for Overlay 2 (channel 3) */ -#define LCCR5_BSM4 (1<<19) /* Branch mask for Overlay 2 (channel 4) */ -#define LCCR5_BSM5 (1<<20) /* Branch mask for cursor (channel 5) */ -#define LCCR5_BSM6 (1<<21) /* Branch mask for data command (channel 6) */ - -#define LCCR5_IUM1 (1<<24) /* Input FIFO Underrun Mask for Overlay 1 */ -#define LCCR5_IUM2 (1<<25) /* Input FIFO Underrun Mask for Overlay 2 */ -#define LCCR5_IUM3 (1<<26) /* Input FIFO Underrun Mask for Overlay 2 */ -#define LCCR5_IUM4 (1<<27) /* Input FIFO Underrun Mask for Overlay 2 */ -#define LCCR5_IUM5 (1<<28) /* Input FIFO Underrun Mask for cursor */ -#define LCCR5_IUM6 (1<<29) /* Input FIFO Underrun Mask for data command */ - -#define OVL1C1_O1EN (1<<31) /* Enable bit for Overlay 1 */ -#define OVL2C1_O2EN (1<<31) /* Enable bit for Overlay 2 */ -#define CCR_CEN (1<<31) /* Enable bit for Cursor */ - -/* LCD registers */ -#define LCCR4 __REG(0x44000010) /* LCD Controller Control Register 4 */ -#define LCCR5 __REG(0x44000014) /* LCD Controller Control Register 5 */ -#define FBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */ -#define FBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */ -#define FBR2 __REG(0x44000028) /* DMA Channel 2 Frame Branch Register */ -#define FBR3 __REG(0x4400002C) /* DMA Channel 3 Frame Branch Register */ -#define FBR4 __REG(0x44000030) /* DMA Channel 4 Frame Branch Register */ -#define FDADR2 __REG(0x44000220) /* DMA Channel 2 Frame Descriptor Address Register */ -#define FSADR2 __REG(0x44000224) /* DMA Channel 2 Frame Source Address Register */ -#define FIDR2 __REG(0x44000228) /* DMA Channel 2 Frame ID Register */ -#define LDCMD2 __REG(0x4400022C) /* DMA Channel 2 Command Register */ -#define FDADR3 __REG(0x44000230) /* DMA Channel 3 Frame Descriptor Address Register */ -#define FSADR3 __REG(0x44000234) /* DMA Channel 3 Frame Source Address Register */ -#define FIDR3 __REG(0x44000238) /* DMA Channel 3 Frame ID Register */ -#define LDCMD3 __REG(0x4400023C) /* DMA Channel 3 Command Register */ -#define FDADR4 __REG(0x44000240) /* DMA Channel 4 Frame Descriptor Address Register */ -#define FSADR4 __REG(0x44000244) /* DMA Channel 4 Frame Source Address Register */ -#define FIDR4 __REG(0x44000248) /* DMA Channel 4 Frame ID Register */ -#define LDCMD4 __REG(0x4400024C) /* DMA Channel 4 Command Register */ -#define FDADR5 __REG(0x44000250) /* DMA Channel 5 Frame Descriptor Address Register */ -#define FSADR5 __REG(0x44000254) /* DMA Channel 5 Frame Source Address Register */ -#define FIDR5 __REG(0x44000258) /* DMA Channel 5 Frame ID Register */ -#define LDCMD5 __REG(0x4400025C) /* DMA Channel 5 Command Register */ - -#define OVL1C1 __REG(0x44000050) /* Overlay 1 Control Register 1 */ -#define OVL1C2 __REG(0x44000060) /* Overlay 1 Control Register 2 */ -#define OVL2C1 __REG(0x44000070) /* Overlay 2 Control Register 1 */ -#define OVL2C2 __REG(0x44000080) /* Overlay 2 Control Register 2 */ -#define CCR __REG(0x44000090) /* Cursor Control Register */ - -#define FBR5 __REG(0x44000110) /* DMA Channel 5 Frame Branch Register */ -#define FBR6 __REG(0x44000114) /* DMA Channel 6 Frame Branch Register */ - -/* -* Touch screen interface -*/ -#ifdef CONFIG_CPU_MONAHANS -#define ADCD __REG(0x41c00000) /*Analog-to-Digital Converter Data register*/ -#define ADCS __REG(0x41c00004) /*Analog-to-Digital Converter Setup register*/ -#define ADCE __REG(0x41c00008) /*Analog-to-Digital Converter Enable register*/ #endif - /* * Memory controller */ -#ifndef CONFIG_CPU_MONAHANS -#define MEMC_BASE __REG(0x48000000) /* Base of Memory Controller */ -#define MDCNFG_OFFSET 0x0 -#define MDREFR_OFFSET 0x4 -#define MSC0_OFFSET 0x8 -#define MSC1_OFFSET 0xC -#define MSC2_OFFSET 0x10 -#define MECR_OFFSET 0x14 -#define SXLCR_OFFSET 0x18 -#define SXCNFG_OFFSET 0x1C -#define FLYCNFG_OFFSET 0x20 -#define SXMRS_OFFSET 0x24 -#define MCMEM0_OFFSET 0x28 -#define MCMEM1_OFFSET 0x2C -#define MCATT0_OFFSET 0x30 -#define MCATT1_OFFSET 0x34 -#define MCIO0_OFFSET 0x38 -#define MCIO1_OFFSET 0x3C -#define MDMRS_OFFSET 0x40 - -#define MDCNFG __REG((0x48000000) /* SDRAM Configuration Register 0 */ -#define MDCNFG_DE0 0x00000001 -#define MDCNFG_DE1 0x00000002 -#define MDCNFG_DE2 0x00010000 -#define MDCNFG_DE3 0x00020000 -#define MDCNFG_DWID0 0x00000004 -#endif +#define MEMC_BASE __REG(0x48000000) /* Base of Memory Controller */ +#define MDCNFG_OFFSET 0x0 +#define MDREFR_OFFSET 0x4 +#define MSC0_OFFSET 0x8 +#define MSC1_OFFSET 0xC +#define MSC2_OFFSET 0x10 +#define MECR_OFFSET 0x14 +#define SXLCR_OFFSET 0x18 +#define SXCNFG_OFFSET 0x1C +#define FLYCNFG_OFFSET 0x20 +#define SXMRS_OFFSET 0x24 +#define MCMEM0_OFFSET 0x28 +#define MCMEM1_OFFSET 0x2C +#define MCATT0_OFFSET 0x30 +#define MCATT1_OFFSET 0x34 +#define MCIO0_OFFSET 0x38 +#define MCIO1_OFFSET 0x3C +#define MDMRS_OFFSET 0x40 + +#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */ +#define MDCNFG_DE0 0x00000001 +#define MDCNFG_DE1 0x00000002 +#define MDCNFG_DE2 0x00010000 +#define MDCNFG_DE3 0x00020000 +#define MDCNFG_DWID0 0x00000004 -#ifdef CONFIG_CPU_MONAHANS -/* Static Memory Controller Registers */ -#define MSC0 __REG_2(0x4A000008) /* Static Memory Control Register 0 */ -#define MSC1 __REG_2(0x4A00000C) /* Static Memory Control Register 1 */ -#define MECR __REG_2(0x4A000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */ -#define SXCNFG __REG_2(0x4A00001C) /* Synchronous Static Memory Control Register */ -#define MCMEM0 __REG_2(0x4A000028) /* Card interface Common Memory Space Socket 0 Timing */ -#define MCATT0 __REG_2(0x4A000030) /* Card interface Attribute Space Socket 0 Timing Configuration */ -#define MCIO0 __REG_2(0x4A000038) /* Card interface I/O Space Socket 0 Timing Configuration */ -#define MEMCLKCFG __REG_2(0x4A000068) /* SCLK speed configuration */ -#define CSADRCFG0 __REG_2(0x4A000080) /* Address Configuration for chip select 0 */ -#define CSADRCFG1 __REG_2(0x4A000084) /* Address Configuration for chip select 1 */ -#define CSADRCFG2 __REG_2(0x4A000088) /* Address Configuration for chip select 2 */ -#define CSADRCFG3 __REG_2(0x4A00008C) /* Address Configuration for chip select 3 */ -#define CSADRCFG_P __REG_2(0x4A000090) /* Address Configuration for pcmcia card interface */ -#define CSMSADRCFG __REG_2(0x4A0000A0) /* Master Address Configuration Register */ - -/* Dynamic Memory Controller Registers */ -#define MDCNFG __REG_2(0x48100000) /* SDRAM Configuration Register 0 */ -#define MDREFR __REG_2(0x48100004) /* SDRAM Refresh Control Register */ -#define FLYCNFG __REG_2(0x48100020) /* Fly-by DMA DVAL[1:0] polarities */ -#define MDMRS __REG_2(0x48100040) /* MRS value to be written to SDRAM */ -#define DDR_SCAL __REG_2(0x48100050) /* Software Delay Line Calibration/Configuration for external DDR memory. */ -#define DDR_HCAL __REG_2(0x48100060) /* Hardware Delay Line Calibration/Configuration for external DDR memory. */ -#define DMCIER __REG_2(0x48100070) /* Dynamic MC Interrupt Enable Register. */ -#define DMCISR __REG_2(0x48100078) /* Dynamic MC Interrupt Status Register. */ -#define DDR_DLS __REG_2(0x48100080) /* DDR Delay Line Value Status register for external DDR memory. */ -#define EMPI __REG_2(0x48100090) /* EMPI Control Register */ -#define RCOMP __REG_2(0x48100100) -#define PAD_MA __REG_2(0x48100110) -#define PAD_MDMSB __REG_2(0x48100114) -#define PAD_MDLSB __REG_2(0x48100118) -#define PAD_DMEM __REG_2(0x4810011c) -#define PAD_SDCLK __REG_2(0x48100120) -#define PAD_SDCS __REG_2(0x48100124) -#define PAD_SMEM __REG_2(0x48100128) -#define PAD_SCLK __REG_2(0x4810012C) - - -/* Data Flash Controller Registers */ - -#define NDCR __REG_2(0x43100000) /* Data Flash Control register */ -#define NDTR0CS0 __REG_2(0x43100004) /* Data Controller Timing Parameter 0 Register for ND_nCS0 */ -#define NDTR0CS1 __REG_2(0x43100008) /* Data Controller Timing Parameter 0 Register for ND_nCS1 */ -#define NDTR1CS0 __REG_2(0x4310000C) /* Data Controller Timing Parameter 1 Register for ND_nCS0 */ -#define NDTR1CS1 __REG_2(0x43100010) /* Data Controller Timing Parameter 1 Register for ND_nCS1 */ -#define NDSR __REG_2(0x43100014) /* Data Controller Status Register */ -#define NDPCR __REG_2(0x43100018) /* Data Controller Page Count Register */ -#define NDBDR0 __REG_2(0x4310001C) /* Data Controller Bad Block Register 0 */ -#define NDBDR1 __REG_2(0x43100020) /* Data Controller Bad Block Register 1 */ -#define NDDB __REG_2(0x43100040) /* Data Controller Data Buffer */ -#define NDCB0 __REG_2(0x43100048) /* Data Controller Command Buffer0 */ -#define NDCB1 __REG_2(0x4310004C) /* Data Controller Command Buffer1 */ -#define NDCB2 __REG_2(0x43100050) /* Data Controller Command Buffer2 */ - -#define NDCR_SPARE_EN (0x1<<31) -#define NDCR_ECC_EN (0x1<<30) -#define NDCR_DMA_EN (0x1<<29) -#define NDCR_ND_RUN (0x1<<28) -#define NDCR_DWIDTH_C (0x1<<27) -#define NDCR_DWIDTH_M (0x1<<26) -#define NDCR_PAGE_SZ (0x3<<24) -#define NDCR_NCSX (0x1<<23) -#define NDCR_ND_MODE (0x3<<21) -#define NDCR_NAND_MODE 0x0 -#define NDCR_CLR_PG_CNT (0x1<<20) -#define NDCR_CLR_ECC (0x1<<19) -#define NDCR_RD_ID_CNT (0x7<<16) -#define NDCR_RA_START (0x1<<15) -#define NDCR_PG_PER_BLK (0x1<<14) -#define NDCR_ND_ARB_EN (0x1<<12) - -#define NDSR_RDY (0x1<<11) -#define NDSR_CS0_PAGED (0x1<<10) -#define NDSR_CS1_PAGED (0x1<<9) -#define NDSR_CS0_CMDD (0x1<<8) -#define NDSR_CS1_CMDD (0x1<<7) -#define NDSR_CS0_BBD (0x1<<6) -#define NDSR_CS1_BBD (0x1<<5) -#define NDSR_BDERR (0x1<<4) -#define NDSR_SBERR (0x1<<3) -#define NDSR_WRDREQ (0x1<<2) -#define NDSR_RDDREQ (0x1<<1) -#define NDSR_WRCMDREQ (0x1) - -#define NDCB0_AUTO_RS (0x1<<25) -#define NDCB0_CSEL (0x1<<24) -#define NDCB0_CMD_TYPE (0x7<<21) -#define NDCB0_NC (0x1<<20) -#define NDCB0_DBC (0x1<<19) -#define NDCB0_ADDR_CYC (0x7<<16) -#define NDCB0_CMD2 (0xff<<8) -#define NDCB0_CMD1 (0xff) -#define MCMEM(s) MCMEM0 -#define MCATT(s) MCATT0 -#define MCIO(s) MCIO0 -#define MECR_CIT (1 << 1)/* Card Is There: 0 -> no card, 1 -> card inserted */ -#else /* CONFIG_CPU_MONAHANS */ - -/* mk: defined @2253 #define MDCNFG __REG(0x48000000) /\* SDRAM Configuration Register 0 *\/ */ #define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */ #define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */ #define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */ @@ -2405,19 +1545,6 @@ typedef void (*ExcpHndlr) (void) ; #define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */ #define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */ -/* - * More handy macros for PCMCIA - * - * Arg is socket number - */ -#define MCMEM(s) __REG2(0x48000028, (s)<<2 ) /* Card interface Common Memory Space Socket s Timing */ -#define MCATT(s) __REG2(0x48000030, (s)<<2 ) /* Card interface Attribute Space Socket s Timing Configuration */ -#define MCIO(s) __REG2(0x48000038, (s)<<2 ) /* Card interface I/O Space Socket s Timing Configuration */ - -/* MECR register defines */ -#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */ -#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */ - #define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */ #define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */ #define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */ @@ -2431,15 +1558,14 @@ typedef void (*ExcpHndlr) (void) ; #define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */ #define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */ #define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */ -#endif -#ifdef CONFIG_PXA27X +#if defined(CONFIG_PXA27X) #define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ #define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */ #define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */ -#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */ +#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */ #define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */ #define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */ #define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */ @@ -2447,871 +1573,177 @@ typedef void (*ExcpHndlr) (void) ; #define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ #define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ -/* - * Keypad - */ -#define KPC __REG(0x41500000) /* Keypad Interface Control register */ -#define KPDK __REG(0x41500008) /* Keypad Interface Direct Key register */ -#define KPREC __REG(0x41500010) /* Keypad Interface Rotary Encoder register */ -#define KPMK __REG(0x41500018) /* Keypad Interface Matrix Key register */ -#define KPAS __REG(0x41500020) /* Keypad Interface Automatic Scan register */ -#define KPASMKP0 __REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */ -#define KPASMKP1 __REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */ -#define KPASMKP2 __REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */ -#define KPASMKP3 __REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */ -#define KPKDI __REG(0x41500048) /* Keypad Interface Key Debounce Interval register */ - -#define KPC_AS (0x1 << 30) /* Automatic Scan bit */ -#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */ -#define KPC_MI (0x1 << 22) /* Matrix interrupt bit */ -#define KPC_IMKP (0x1 << 21) /* Ignore Multiple Key Press */ -#define KPC_MS7 (0x1 << 20) /* Matrix scan line 7 */ -#define KPC_MS6 (0x1 << 19) /* Matrix scan line 6 */ -#define KPC_MS5 (0x1 << 18) /* Matrix scan line 5 */ -#define KPC_MS4 (0x1 << 17) /* Matrix scan line 4 */ -#define KPC_MS3 (0x1 << 16) /* Matrix scan line 3 */ -#define KPC_MS2 (0x1 << 15) /* Matrix scan line 2 */ -#define KPC_MS1 (0x1 << 14) /* Matrix scan line 1 */ -#define KPC_MS0 (0x1 << 13) /* Matrix scan line 0 */ -#define KPC_MS_ALL (KPC_MS0 | KPC_MS1 | KPC_MS2 | KPC_MS3 | KPC_MS4 | KPC_MS5 | KPC_MS6 | KPC_MS7) -#define KPC_ME (0x1 << 12) /* Matrix Keypad Enable */ -#define KPC_MIE (0x1 << 11) /* Matrix Interrupt Enable */ -#define KPC_DK_DEB_SEL (0x1 << 9) /* Direct Keypad Debounce Select */ -#define KPC_DI (0x1 << 5) /* Direct key interrupt bit */ -#define KPC_RE_ZERO_DEB (0x1 << 4) /* Rotary Encoder Zero Debounce */ -#define KPC_REE1 (0x1 << 3) /* Rotary Encoder1 Enable */ -#define KPC_REE0 (0x1 << 2) /* Rotary Encoder0 Enable */ -#define KPC_DE (0x1 << 1) /* Direct Keypad Enable */ -#define KPC_DIE (0x1 << 0) /* Direct Keypad interrupt Enable */ - -#define KPDK_DKP (0x1 << 31) -#define KPDK_DK7 (0x1 << 7) -#define KPDK_DK6 (0x1 << 6) -#define KPDK_DK5 (0x1 << 5) -#define KPDK_DK4 (0x1 << 4) -#define KPDK_DK3 (0x1 << 3) -#define KPDK_DK2 (0x1 << 2) -#define KPDK_DK1 (0x1 << 1) -#define KPDK_DK0 (0x1 << 0) - -#define KPREC_OF1 (0x1 << 31) -#define kPREC_UF1 (0x1 << 30) -#define KPREC_OF0 (0x1 << 15) -#define KPREC_UF0 (0x1 << 14) - -#define KPMK_MKP (0x1 << 31) -#define KPAS_SO (0x1 << 31) -#define KPASMKPx_SO (0x1 << 31) +/* Interrupt Controller */ -/* - * UHC: USB Host Controller (OHCI-like) register definitions - */ -#define UHC_BASE_PHYS (0x4C000000) -#define UHCREV __REG(0x4C000000) /* UHC HCI Spec Revision */ -#define UHCHCON __REG(0x4C000004) /* UHC Host Control Register */ -#define UHCCOMS __REG(0x4C000008) /* UHC Command Status Register */ -#define UHCINTS __REG(0x4C00000C) /* UHC Interrupt Status Register */ -#define UHCINTE __REG(0x4C000010) /* UHC Interrupt Enable */ -#define UHCINTD __REG(0x4C000014) /* UHC Interrupt Disable */ -#define UHCHCCA __REG(0x4C000018) /* UHC Host Controller Comm. Area */ -#define UHCPCED __REG(0x4C00001C) /* UHC Period Current Endpt Descr */ -#define UHCCHED __REG(0x4C000020) /* UHC Control Head Endpt Descr */ -#define UHCCCED __REG(0x4C000024) /* UHC Control Current Endpt Descr */ -#define UHCBHED __REG(0x4C000028) /* UHC Bulk Head Endpt Descr */ -#define UHCBCED __REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */ -#define UHCDHEAD __REG(0x4C000030) /* UHC Done Head */ -#define UHCFMI __REG(0x4C000034) /* UHC Frame Interval */ -#define UHCFMR __REG(0x4C000038) /* UHC Frame Remaining */ -#define UHCFMN __REG(0x4C00003C) /* UHC Frame Number */ -#define UHCPERS __REG(0x4C000040) /* UHC Periodic Start */ -#define UHCLS __REG(0x4C000044) /* UHC Low Speed Threshold */ -#define UHCRHDA __REG(0x4C000048) /* UHC Root Hub Descriptor A */ -#define UHCRHDB __REG(0x4C00004C) /* UHC Root Hub Descriptor B */ -#define UHCRHS __REG(0x4C000050) /* UHC Root Hub Status */ -#define UHCRHPS1 __REG(0x4C000054) /* UHC Root Hub Port 1 Status */ -#define UHCRHPS2 __REG(0x4C000058) /* UHC Root Hub Port 2 Status */ -#define UHCRHPS3 __REG(0x4C00005C) /* UHC Root Hub Port 3 Status */ -#define UHCRHPS(x) __REG2(0x4C000050, (x)<<2) - -#define UHCSTAT __REG(0x4C000060) /* UHC Status Register */ -#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */ -#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/ -#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/ -#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */ -#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */ -#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */ -#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */ -#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */ -#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */ - -#define UHCHR __REG(0x4C000064) /* UHC Reset Register */ -#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */ -#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */ -#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */ -#define UHCHR_PCPL (1 << 7) /* Power control polarity low */ -#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */ -#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */ -#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */ -#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */ -#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */ -#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */ -#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */ - -#define UHCHIE __REG(0x4C000068) /* UHC Interrupt Enable Register*/ -#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */ -#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */ -#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */ -#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */ -#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort - Interrupt Enable*/ -#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */ -#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */ - -#define UHCHIT __REG(0x4C00006C) /* UHC Interrupt Test register */ - -/* Camera Interface */ -#define CICR0 __REG(0x50000000) -#define CICR1 __REG(0x50000004) -#define CICR2 __REG(0x50000008) -#define CICR3 __REG(0x5000000C) -#define CICR4 __REG(0x50000010) -#define CISR __REG(0x50000014) -#define CIFR __REG(0x50000018) -#define CITOR __REG(0x5000001C) -#define CIBR0 __REG(0x50000028) -#define CIBR1 __REG(0x50000030) -#define CIBR2 __REG(0x50000038) - -#define CICR0_DMAEN (1 << 31) /* DMA request enable */ -#define CICR0_PAR_EN (1 << 30) /* Parity enable */ -#define CICR0_SL_CAP_EN (1 << 29) /* Capture enable for slave mode */ -#define CICR0_ENB (1 << 28) /* Camera interface enable */ -#define CICR0_DIS (1 << 27) /* Camera interface disable */ -#define CICR0_SIM (0x7 << 24) /* Sensor interface mode mask */ -#define CICR0_TOM (1 << 9) /* Time-out mask */ -#define CICR0_RDAVM (1 << 8) /* Receive-data-available mask */ -#define CICR0_FEM (1 << 7) /* FIFO-empty mask */ -#define CICR0_EOLM (1 << 6) /* End-of-line mask */ -#define CICR0_PERRM (1 << 5) /* Parity-error mask */ -#define CICR0_QDM (1 << 4) /* Quick-disable mask */ -#define CICR0_CDM (1 << 3) /* Disable-done mask */ -#define CICR0_SOFM (1 << 2) /* Start-of-frame mask */ -#define CICR0_EOFM (1 << 1) /* End-of-frame mask */ -#define CICR0_FOM (1 << 0) /* FIFO-overrun mask */ - -#define CICR1_TBIT (1 << 31) /* Transparency bit */ -#define CICR1_RGBT_CONV (0x3 << 30) /* RGBT conversion mask */ -#define CICR1_PPL (0x3f << 15) /* Pixels per line mask */ -#define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */ -#define CICR1_RGB_F (1 << 11) /* RGB format */ -#define CICR1_YCBCR_F (1 << 10) /* YCbCr format */ -#define CICR1_RGB_BPP (0x7 << 7) /* RGB bis per pixel mask */ -#define CICR1_RAW_BPP (0x3 << 5) /* Raw bis per pixel mask */ -#define CICR1_COLOR_SP (0x3 << 3) /* Color space mask */ -#define CICR1_DW (0x7 << 0) /* Data width mask */ - -#define CICR2_BLW (0xff << 24) /* Beginning-of-line pixel clock - wait count mask */ -#define CICR2_ELW (0xff << 16) /* End-of-line pixel clock - wait count mask */ -#define CICR2_HSW (0x3f << 10) /* Horizontal sync pulse width mask */ -#define CICR2_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock - wait count mask */ -#define CICR2_FSW (0x7 << 0) /* Frame stabilization - wait count mask */ - -#define CICR3_BFW (0xff << 24) /* Beginning-of-frame line clock - wait count mask */ -#define CICR3_EFW (0xff << 16) /* End-of-frame line clock - wait count mask */ -#define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */ -#define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock - wait count mask */ -#define CICR3_LPF (0x3ff << 0) /* Lines per frame mask */ - -#define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */ -#define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */ -#define CICR4_PCP (1 << 22) /* Pixel clock polarity */ -#define CICR4_HSP (1 << 21) /* Horizontal sync polarity */ -#define CICR4_VSP (1 << 20) /* Vertical sync polarity */ -#define CICR4_MCLK_EN (1 << 19) /* MCLK enable */ -#define CICR4_FR_RATE (0x7 << 8) /* Frame rate mask */ -#define CICR4_DIV (0xff << 0) /* Clock divisor mask */ - -#define CISR_FTO (1 << 15) /* FIFO time-out */ -#define CISR_RDAV_2 (1 << 14) /* Channel 2 receive data available */ -#define CISR_RDAV_1 (1 << 13) /* Channel 1 receive data available */ -#define CISR_RDAV_0 (1 << 12) /* Channel 0 receive data available */ -#define CISR_FEMPTY_2 (1 << 11) /* Channel 2 FIFO empty */ -#define CISR_FEMPTY_1 (1 << 10) /* Channel 1 FIFO empty */ -#define CISR_FEMPTY_0 (1 << 9) /* Channel 0 FIFO empty */ -#define CISR_EOL (1 << 8) /* End of line */ -#define CISR_PAR_ERR (1 << 7) /* Parity error */ -#define CISR_CQD (1 << 6) /* Camera interface quick disable */ -#define CISR_SOF (1 << 5) /* Start of frame */ -#define CISR_CDD (1 << 4) /* Camera interface disable done */ -#define CISR_EOF (1 << 3) /* End of frame */ -#define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */ -#define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */ -#define CISR_IFO_0 (1 << 0) /* FIFO overrun for Channel 0 */ - -#define CIFR_FLVL2 (0x7f << 23) /* FIFO 2 level mask */ -#define CIFR_FLVL1 (0x7f << 16) /* FIFO 1 level mask */ -#define CIFR_FLVL0 (0xff << 8) /* FIFO 0 level mask */ -#define CIFR_THL_0 (0x3 << 4) /* Threshold Level for Channel 0 FIFO */ -#define CIFR_RESET_F (1 << 3) /* Reset input FIFOs */ -#define CIFR_FEN2 (1 << 2) /* FIFO enable for channel 2 */ -#define CIFR_FEN1 (1 << 1) /* FIFO enable for channel 1 */ -#define CIFR_FEN0 (1 << 0) /* FIFO enable for channel 0 */ - -#define SRAM_SIZE 0x40000 /* 4x64K */ - -#define SRAM_MEM_PHYS 0x5C000000 - -#define IMPMCR __REG(0x58000000) /* IM Power Management Control Reg */ -#define IMPMSR __REG(0x58000008) /* IM Power Management Status Reg */ - -#define IMPMCR_PC3 (0x3 << 22) /* Bank 3 Power Control */ -#define IMPMCR_PC3_RUN_MODE (0x0 << 22) /* Run mode */ -#define IMPMCR_PC3_STANDBY_MODE (0x1 << 22) /* Standby mode */ -#define IMPMCR_PC3_AUTO_MODE (0x3 << 22) /* Automatically controlled */ - -#define IMPMCR_PC2 (0x3 << 20) /* Bank 2 Power Control */ -#define IMPMCR_PC2_RUN_MODE (0x0 << 20) /* Run mode */ -#define IMPMCR_PC2_STANDBY_MODE (0x1 << 20) /* Standby mode */ -#define IMPMCR_PC2_AUTO_MODE (0x3 << 20) /* Automatically controlled */ - -#define IMPMCR_PC1 (0x3 << 18) /* Bank 1 Power Control */ -#define IMPMCR_PC1_RUN_MODE (0x0 << 18) /* Run mode */ -#define IMPMCR_PC1_STANDBY_MODE (0x1 << 18) /* Standby mode */ -#define IMPMCR_PC1_AUTO_MODE (0x3 << 18) /* Automatically controlled */ - -#define IMPMCR_PC0 (0x3 << 16) /* Bank 0 Power Control */ -#define IMPMCR_PC0_RUN_MODE (0x0 << 16) /* Run mode */ -#define IMPMCR_PC0_STANDBY_MODE (0x1 << 16) /* Standby mode */ -#define IMPMCR_PC0_AUTO_MODE (0x3 << 16) /* Automatically controlled */ - -#define IMPMCR_AW3 (1 << 11) /* Bank 3 Automatic Wake-up enable */ -#define IMPMCR_AW2 (1 << 10) /* Bank 2 Automatic Wake-up enable */ -#define IMPMCR_AW1 (1 << 9) /* Bank 1 Automatic Wake-up enable */ -#define IMPMCR_AW0 (1 << 8) /* Bank 0 Automatic Wake-up enable */ - -#define IMPMCR_DST (0xFF << 0) /* Delay Standby Time, ms */ - -#define IMPMSR_PS3 (0x3 << 6) /* Bank 3 Power Status: */ -#define IMPMSR_PS3_RUN_MODE (0x0 << 6) /* Run mode */ -#define IMPMSR_PS3_STANDBY_MODE (0x1 << 6) /* Standby mode */ - -#define IMPMSR_PS2 (0x3 << 4) /* Bank 2 Power Status: */ -#define IMPMSR_PS2_RUN_MODE (0x0 << 4) /* Run mode */ -#define IMPMSR_PS2_STANDBY_MODE (0x1 << 4) /* Standby mode */ - -#define IMPMSR_PS1 (0x3 << 2) /* Bank 1 Power Status: */ -#define IMPMSR_PS1_RUN_MODE (0x0 << 2) /* Run mode */ -#define IMPMSR_PS1_STANDBY_MODE (0x1 << 2) /* Standby mode */ - -#define IMPMSR_PS0 (0x3 << 0) /* Bank 0 Power Status: */ -#define IMPMSR_PS0_RUN_MODE (0x0 << 0) /* Run mode */ -#define IMPMSR_PS0_STANDBY_MODE (0x1 << 0) /* Standby mode */ +#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ +#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ +#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ +#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ +#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ -#endif +/* General Purpose I/O */ -/* MFPR */ -#ifdef CONFIG_CPU_MONAHANS +#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */ +#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */ +#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */ +#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */ +#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */ +#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO <127:96> */ +#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */ +#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */ +#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */ -#define SRAM_SIZE 0xC0000 /* 4x64K */ -#define SRAM_MEM_PHYS 0x5C000000 +/* Core Clock */ -/* GPIO alternate function assignments */ -#define APPS_PAD_BASE 0x40E10000 - -/* MFPR regsiter locations for each pin */ -#define GPIO0_MFPR (APPS_PAD_BASE + 0x0124) -#define GPIO1_MFPR (APPS_PAD_BASE + 0x0128) -#define GPIO2_MFPR (APPS_PAD_BASE + 0x012C) -#define GPIO3_MFPR (APPS_PAD_BASE + 0x0130) -#define GPIO4_MFPR (APPS_PAD_BASE + 0x0134) -#define GPIO5_MFPR (APPS_PAD_BASE + 0x028C) -#define GPIO6_MFPR (APPS_PAD_BASE + 0x0290) -#define GPIO7_MFPR (APPS_PAD_BASE + 0x0294) -#define GPIO8_MFPR (APPS_PAD_BASE + 0x0298) -#define GPIO9_MFPR (APPS_PAD_BASE + 0x029C) -#define GPIO10_MFPR (APPS_PAD_BASE + 0x0458) -#define GPIO11_MFPR (APPS_PAD_BASE + 0x02A0) -#define GPIO12_MFPR (APPS_PAD_BASE + 0x02A4) -#define GPIO13_MFPR (APPS_PAD_BASE + 0x02A8) -#define GPIO14_MFPR (APPS_PAD_BASE + 0x02AC) -#define GPIO15_MFPR (APPS_PAD_BASE + 0x02B0) -#define GPIO16_MFPR (APPS_PAD_BASE + 0x02B4) -#define GPIO17_MFPR (APPS_PAD_BASE + 0x02B8) -#define GPIO18_MFPR (APPS_PAD_BASE + 0x02BC) -#define GPIO19_MFPR (APPS_PAD_BASE + 0x02C0) -#define GPIO20_MFPR (APPS_PAD_BASE + 0x02C4) -#define GPIO21_MFPR (APPS_PAD_BASE + 0x02C8) -#define GPIO22_MFPR (APPS_PAD_BASE + 0x02CC) -#define GPIO23_MFPR (APPS_PAD_BASE + 0x02D0) -#define GPIO24_MFPR (APPS_PAD_BASE + 0x02D4) -#define GPIO25_MFPR (APPS_PAD_BASE + 0x02D8) -#define GPIO26_MFPR (APPS_PAD_BASE + 0x02DC) -#define GPIO27_MFPR (APPS_PAD_BASE + 0x0400) -#define GPIO28_MFPR (APPS_PAD_BASE + 0x0404) -#define GPIO29_MFPR (APPS_PAD_BASE + 0x0408) -#define GPIO30_MFPR (APPS_PAD_BASE + 0x040C) -#define GPIO31_MFPR (APPS_PAD_BASE + 0x0410) -#define GPIO32_MFPR (APPS_PAD_BASE + 0x0414) -#define GPIO33_MFPR (APPS_PAD_BASE + 0x0418) -#define GPIO34_MFPR (APPS_PAD_BASE + 0x041C) -#define GPIO35_MFPR (APPS_PAD_BASE + 0x0420) -#define GPIO36_MFPR (APPS_PAD_BASE + 0x0424) -#define GPIO37_MFPR (APPS_PAD_BASE + 0x0428) -#define GPIO38_MFPR (APPS_PAD_BASE + 0x042C) -#define GPIO39_MFPR (APPS_PAD_BASE + 0x0430) -#define GPIO40_MFPR (APPS_PAD_BASE + 0x0434) -#define GPIO41_MFPR (APPS_PAD_BASE + 0x0438) -#define GPIO42_MFPR (APPS_PAD_BASE + 0x043C) -#define GPIO43_MFPR (APPS_PAD_BASE + 0x0440) -#define GPIO44_MFPR (APPS_PAD_BASE + 0x0444) -#define GPIO45_MFPR (APPS_PAD_BASE + 0x0448) -#define GPIO46_MFPR (APPS_PAD_BASE + 0x044C) -#define GPIO47_MFPR (APPS_PAD_BASE + 0x0450) -#define GPIO48_MFPR (APPS_PAD_BASE + 0x0454) -#define GPIO49_MFPR (APPS_PAD_BASE + 0x045C) -#define GPIO50_MFPR (APPS_PAD_BASE + 0x0460) -#define GPIO51_MFPR (APPS_PAD_BASE + 0x0464) -#define GPIO52_MFPR (APPS_PAD_BASE + 0x0468) -#define GPIO53_MFPR (APPS_PAD_BASE + 0x046C) -#define GPIO54_MFPR (APPS_PAD_BASE + 0x0470) -#define GPIO55_MFPR (APPS_PAD_BASE + 0x0474) -#define GPIO56_MFPR (APPS_PAD_BASE + 0x0478) -#define GPIO57_MFPR (APPS_PAD_BASE + 0x047C) -#define GPIO58_MFPR (APPS_PAD_BASE + 0x0480) -#define GPIO59_MFPR (APPS_PAD_BASE + 0x0484) -#define GPIO60_MFPR (APPS_PAD_BASE + 0x0488) -#define GPIO61_MFPR (APPS_PAD_BASE + 0x048C) -#define GPIO62_MFPR (APPS_PAD_BASE + 0x0490) -#define GPIO63_MFPR (APPS_PAD_BASE + 0x04B4) -#define GPIO64_MFPR (APPS_PAD_BASE + 0x04B8) -#define GPIO65_MFPR (APPS_PAD_BASE + 0x04BC) -#define GPIO66_MFPR (APPS_PAD_BASE + 0x04C0) -#define GPIO67_MFPR (APPS_PAD_BASE + 0x04C4) -#define GPIO68_MFPR (APPS_PAD_BASE + 0x04C8) -#define GPIO69_MFPR (APPS_PAD_BASE + 0x04CC) -#define GPIO70_MFPR (APPS_PAD_BASE + 0x04D0) -#define GPIO71_MFPR (APPS_PAD_BASE + 0x04D4) -#define GPIO72_MFPR (APPS_PAD_BASE + 0x04D8) -#define GPIO73_MFPR (APPS_PAD_BASE + 0x04DC) -#define GPIO74_MFPR (APPS_PAD_BASE + 0x04F0) -#define GPIO75_MFPR (APPS_PAD_BASE + 0x04F4) -#define GPIO76_MFPR (APPS_PAD_BASE + 0x04F8) -#define GPIO77_MFPR (APPS_PAD_BASE + 0x04FC) -#define GPIO78_MFPR (APPS_PAD_BASE + 0x0500) -#define GPIO79_MFPR (APPS_PAD_BASE + 0x0504) -#define GPIO80_MFPR (APPS_PAD_BASE + 0x0508) -#define GPIO81_MFPR (APPS_PAD_BASE + 0x050C) -#define GPIO82_MFPR (APPS_PAD_BASE + 0x0510) -#define GPIO83_MFPR (APPS_PAD_BASE + 0x0514) -#define GPIO84_MFPR (APPS_PAD_BASE + 0x0518) -#define GPIO85_MFPR (APPS_PAD_BASE + 0x051C) -#define GPIO86_MFPR (APPS_PAD_BASE + 0x0520) -#define GPIO87_MFPR (APPS_PAD_BASE + 0x0524) -#define GPIO88_MFPR (APPS_PAD_BASE + 0x0528) -#define GPIO89_MFPR (APPS_PAD_BASE + 0x052C) -#define GPIO90_MFPR (APPS_PAD_BASE + 0x0530) -#define GPIO91_MFPR (APPS_PAD_BASE + 0x0534) -#define GPIO92_MFPR (APPS_PAD_BASE + 0x0538) -#define GPIO93_MFPR (APPS_PAD_BASE + 0x053C) -#define GPIO94_MFPR (APPS_PAD_BASE + 0x0540) -#define GPIO95_MFPR (APPS_PAD_BASE + 0x0544) -#define GPIO96_MFPR (APPS_PAD_BASE + 0x0548) -#define GPIO97_MFPR (APPS_PAD_BASE + 0x054C) -#define GPIO98_MFPR (APPS_PAD_BASE + 0x0550) -#define GPIO99_MFPR (APPS_PAD_BASE + 0x0600) -#define GPIO100_MFPR (APPS_PAD_BASE + 0x0604) -#define GPIO101_MFPR (APPS_PAD_BASE + 0x0608) -#define GPIO102_MFPR (APPS_PAD_BASE + 0x060C) -#define GPIO103_MFPR (APPS_PAD_BASE + 0x0610) -#define GPIO104_MFPR (APPS_PAD_BASE + 0x0614) -#define GPIO105_MFPR (APPS_PAD_BASE + 0x0618) -#define GPIO106_MFPR (APPS_PAD_BASE + 0x061C) -#define GPIO107_MFPR (APPS_PAD_BASE + 0x0620) -#define GPIO108_MFPR (APPS_PAD_BASE + 0x0624) -#define GPIO109_MFPR (APPS_PAD_BASE + 0x0628) -#define GPIO110_MFPR (APPS_PAD_BASE + 0x062C) -#define GPIO111_MFPR (APPS_PAD_BASE + 0x0630) -#define GPIO112_MFPR (APPS_PAD_BASE + 0x0634) -#define GPIO113_MFPR (APPS_PAD_BASE + 0x0638) -#define GPIO114_MFPR (APPS_PAD_BASE + 0x063C) -#define GPIO115_MFPR (APPS_PAD_BASE + 0x0640) -#define GPIO116_MFPR (APPS_PAD_BASE + 0x0644) -#define GPIO117_MFPR (APPS_PAD_BASE + 0x0648) -#define GPIO118_MFPR (APPS_PAD_BASE + 0x064C) -#define GPIO119_MFPR (APPS_PAD_BASE + 0x0650) -#define GPIO120_MFPR (APPS_PAD_BASE + 0x0654) -#define GPIO121_MFPR (APPS_PAD_BASE + 0x0658) -#define GPIO122_MFPR (APPS_PAD_BASE + 0x065C) -#define GPIO123_MFPR (APPS_PAD_BASE + 0x0660) -#define GPIO124_MFPR (APPS_PAD_BASE + 0x0664) -#define GPIO125_MFPR (APPS_PAD_BASE + 0x0668) -#define GPIO126_MFPR (APPS_PAD_BASE + 0x066C) -#define GPIO127_MFPR (APPS_PAD_BASE + 0x0670) -#define GPIO0_2_MFPR (APPS_PAD_BASE + 0x0674) /* MFPR for GPIO0_2 */ -#define GPIO1_2_MFPR (APPS_PAD_BASE + 0x0678) /* MFPR for GPIO1_2 */ -#define GPIO2_2_MFPR (APPS_PAD_BASE + 0x067C) /* MFPR for GPIO2_2 */ -#define GPIO3_2_MFPR (APPS_PAD_BASE + 0x0680) /* MFPR for GPIO3_2 */ -#define GPIO4_2_MFPR (APPS_PAD_BASE + 0x0684) /* MFPR for GPIO4_2 */ -#define GPIO5_2_MFPR (APPS_PAD_BASE + 0x0688) /* MFPR for GPIO5_2 */ -#define GPIO6_2_MFPR (APPS_PAD_BASE + 0x0494) /* MFPR for GPIO6_2 */ -#define GPIO7_2_MFPR (APPS_PAD_BASE + 0x0498) /* MFPR for GPIO7_2 */ -#define GPIO8_2_MFPR (APPS_PAD_BASE + 0x049C) /* MFPR for GPIO8_2 */ -#define GPIO9_2_MFPR (APPS_PAD_BASE + 0x04A0) /* MFPR for GPIO9_2 */ -#define GPIO10_2_MFPR (APPS_PAD_BASE + 0x04A4) /* MFPR for GPIO10_2 */ -#define GPIO11_2_MFPR (APPS_PAD_BASE + 0x04A8) /* MFPR for GPIO11_2 */ -#define GPIO12_2_MFPR (APPS_PAD_BASE + 0x04AC) /* MFPR for GPIO12_2 */ -#define GPIO13_2_MFPR (APPS_PAD_BASE + 0x04B0) /* MFPR for GPIO13_2 */ -#define GPIO14_2_MFPR (APPS_PAD_BASE + 0x04E0) /* MFPR for GPIO14_2 */ -#define GPIO15_2_MFPR (APPS_PAD_BASE + 0x04E4) /* MFPR for GPIO15_2 */ -#define GPIO16_2_MFPR (APPS_PAD_BASE + 0x04E8) /* MFPR for GPIO16_2 */ -#define GPIO17_2_MFPR (APPS_PAD_BASE + 0x04EC) /* MFPR for GPIO17_2 */ - -#define PIN_nXCVREN_MFPR (APPS_PAD_BASE + 0x0138) -#define PIN_ND_CLE_MFPR (APPS_PAD_BASE + 0x0204) -#define PIN_DF_nADV1_ALE_MFPR (APPS_PAD_BASE + 0x0208) -#define PIN_DF_SCLK_S_MFPR (APPS_PAD_BASE + 0x020C) -#define PIN_DF_SCLK_E_MFPR (APPS_PAD_BASE + 0x0210) -#define PIN_nBE0_MFPR (APPS_PAD_BASE + 0x0214) -#define PIN_nBE1_MFPR (APPS_PAD_BASE + 0x0218) -#define PIN_DF_nADV2_ALE_MFPR (APPS_PAD_BASE + 0x021C) -#define PIN_DF_INT_RnB_MFPR (APPS_PAD_BASE + 0x0220) -#define PIN_DF_nCS0_MFPR (APPS_PAD_BASE + 0x0224) -#define PIN_DF_nCS1_MFPR (APPS_PAD_BASE + 0x0228) -#define PIN_DF_nWE_MFPR (APPS_PAD_BASE + 0x022C) -#define PIN_DF_nRE_nOE_MFPR (APPS_PAD_BASE + 0x0230) -#define PIN_nLUA_MFPR (APPS_PAD_BASE + 0x0234) -#define PIN_nLLA_MFPR (APPS_PAD_BASE + 0x0238) -#define PIN_DF_ADDR0_MFPR (APPS_PAD_BASE + 0x023C) -#define PIN_DF_ADDR1_MFPR (APPS_PAD_BASE + 0x0240) -#define PIN_DF_ADDR2_MFPR (APPS_PAD_BASE + 0x0244) -#define PIN_DF_ADDR3_MFPR (APPS_PAD_BASE + 0x0248) -#define PIN_DF_IO0_MFPR (APPS_PAD_BASE + 0x024C) -#define PIN_DF_IO1_MFPR (APPS_PAD_BASE + 0x0254) -#define PIN_DF_IO2_MFPR (APPS_PAD_BASE + 0x025C) -#define PIN_DF_IO3_MFPR (APPS_PAD_BASE + 0x0264) -#define PIN_DF_IO4_MFPR (APPS_PAD_BASE + 0x026C) -#define PIN_DF_IO5_MFPR (APPS_PAD_BASE + 0x0274) -#define PIN_DF_IO6_MFPR (APPS_PAD_BASE + 0x027C) -#define PIN_DF_IO7_MFPR (APPS_PAD_BASE + 0x0294) -#define PIN_DF_IO8_MFPR (APPS_PAD_BASE + 0x0298) -#define PIN_DF_IO9_MFPR (APPS_PAD_BASE + 0x029C) -#define PIN_DF_IO10_MFPR (APPS_PAD_BASE + 0x0260) -#define PIN_DF_IO11_MFPR (APPS_PAD_BASE + 0x0268) -#define PIN_DF_IO12_MFPR (APPS_PAD_BASE + 0x0270) -#define PIN_DF_IO13_MFPR (APPS_PAD_BASE + 0x0278) -#define PIN_DF_IO14_MFPR (APPS_PAD_BASE + 0x0280) -#define PIN_DF_IO15_MFPR (APPS_PAD_BASE + 0x0288) - -/* GPIO mode encodings: Direction, Number, MFPR value */ - -#define MFPR_PS 0x80000000 /* MFPR bit 15: pull_sel */ -#define MFPR_PUE 0x40000000 /* MFPR bit 14: pullup_en */ -#define MFPR_PDE 0x20000000 /* MFPR bit 13: pulldown_en */ -#define MFPR_DF1 0x00000000 /* MFPR bit 12-10: drive, fast 1ma */ -#define MFPR_DF2 0x04000000 /* MFPR bit 12-10: drive, fast 2ma */ -#define MFPR_DF3 0x08000000 /* MFPR bit 12-10: drive, fast 3ma */ -#define MFPR_DF4 0x0c000000 /* MFPR bit 12-10: drive, fast 4ma */ -#define MFPR_DS6 0x10000000 /* MFPR bit 12-10: drive, slow 6ma */ -#define MFPR_DF6 0x14000000 /* MFPR bit 12-10: drive, fast 6ma */ -#define MFPR_DS10 0x18000000 /* MFPR bit 12-10: drive, slow 10ma */ -#define MFPR_DF10 0x1c000000 /* MFPR bit 12-10: drive, fast 10ma */ -#define MFPR_SS 0x02000000 /* MFPR bit 9: sleep_sel */ -#define MFPR_SD 0x01000000 /* MFPR bit 8: sleep_data */ -#define MFPR_SE 0x00800000 /* MFPR bit 7: sleep_oe */ -#define MFPR_EC 0x00400000 /* MFPR bit 6: edge_clear */ -#define MFPR_EF 0x00200000 /* MFPR bit 5: edge_fall_en */ -#define MFPR_ER 0x00100000 /* MFPR bit 4: edge_rise_en */ -#define MFPR_ALT0 0x00000000 /* MFPR bit 2-0: alternate function 0 */ -#define MFPR_ALT1 0x00010000 /* MFPR bit 2-0: alternate function 1 */ -#define MFPR_ALT2 0x00020000 /* MFPR bit 2-0: alternate function 2 */ -#define MFPR_ALT3 0x00030000 /* MFPR bit 2-0: alternate function 3 */ -#define MFPR_ALT4 0x00040000 /* MFPR bit 2-0: alternate function 4 */ -#define MFPR_ALT5 0x00050000 /* MFPR bit 2-0: alternate function 5 */ -#define MFPR_ALT6 0x00060000 /* MFPR bit 2-0: alternate function 6 */ -#define MFPR_ALT7 0x00070000 /* MFPR bit 2-0: alternate function 7 */ -#define GPIO_MD_MASK_NR 0x0000ffff -#define GPIO_MD_MASK_MFPR 0xffff0000 -#define GPIO_MD_SHIFT_MFPR 16 - -#define GPIO3_NCS_2 (3|MFPR_DS6|MFPR_ALT1) -#define GPIO11_PWM0 (11|MFPR_DS6|MFPR_ALT1) -#define GPIO12_PWM1 (12|MFPR_DS6|MFPR_ALT1) -#define GPIO14_LCD_BACKLIGHT_PWM3 (14|MFPR_DS6|MFPR_ALT1) - -#define GPIO18_MMC_DAT_0 (18|MFPR_DS6|MFPR_ALT4) -#define GPIO19_MMC_DAT_1 (19|MFPR_DS6|MFPR_ALT4) -#define GPIO20_MMC_DAT_2 (20|MFPR_DS6|MFPR_ALT4) -#define GPIO21_MMC_DAT_3 (21|MFPR_DS6|MFPR_ALT4) -#define GPIO22_CLK_MMC (22|MFPR_DS6|MFPR_ALT4) -#define GPIO23_MMC_CMD (23|MFPR_DS6|MFPR_ALT4) -#define GPIO24_MMC2_DAT_0 (24|MFPR_DS6|MFPR_ALT4) -#define GPIO25_MMC2_DAT_1 (25|MFPR_DS6|MFPR_ALT4) -#define GPIO26_MMC2_DAT_2 (26|MFPR_DS6|MFPR_ALT4) -#define GPIO27_MMC2_DAT_3 (27|MFPR_DS6|MFPR_ALT4) -#define GPIO28_CLK_MMC2 (28|MFPR_DS6|MFPR_ALT4) -#define GPIO29_MMC2_CMD (29|MFPR_DS6|MFPR_ALT4) -#define GPIO30_CLK_MMC (30|MFPR_DS6|MFPR_ALT4) -#define GPIO31_MMC_CMD (31|MFPR_DS6|MFPR_ALT4) -#define GPIO34_AC97_SYSCLK (34|MFPR_DF6|MFPR_ALT1) -#define GPIO35_AC97_SDATA_IN0 (35|MFPR_DF6|MFPR_ALT1) -#define GPIO36_AC97_SDATA_IN1 (36|MFPR_DF6|MFPR_ALT1) -#define GPIO37_AC97_SDATA_OUT (37|MFPR_DF6|MFPR_ALT1) -#define GPIO38_AC97_SYNC (38|MFPR_DF6|MFPR_ALT1) -#define GPIO39_AC97_BITCLK (39|MFPR_DF6|MFPR_ALT1) -#define GPIO40_AC97_RESET_N (40|MFPR_DF6|MFPR_ALT1) -#define GPIO41_FF_UART1_RXD (41|MFPR_DS6|MFPR_ALT2) -#define GPIO42_FF_UART1_TXD (42|MFPR_DS6|MFPR_ALT2) -#define GPIO43_FF_UART1_CTS (43|MFPR_DS6|MFPR_ALT2) -#define GPIO44_FF_UART1_DCD (44|MFPR_DF10|MFPR_SD|MFPR_ALT2) -#define GPIO45_FF_UART1_DSR (45|MFPR_DS6|MFPR_ALT2) -#define GPIO46_FF_UART1_RI (46|MFPR_DS6|MFPR_ALT2) -#define GPIO47_FF_UART1_DTR (47|MFPR_DS6|MFPR_ALT2) -#define GPIO48_FF_UART1_RTS (48|MFPR_DS6|MFPR_ALT2) -#define GPIO49_CIF_DD0 (49|MFPR_DF6|MFPR_ALT1) -#define GPIO50_CIF_DD1 (50|MFPR_DF6|MFPR_ALT1) -#define GPIO51_CIF_DD2 (51|MFPR_DF6|MFPR_ALT1) -#define GPIO52_CIF_DD3 (52|MFPR_DF6|MFPR_ALT1) -#define GPIO53_CIF_DD4 (53|MFPR_DF6|MFPR_ALT1) -#define GPIO54_CIF_DD5 (54|MFPR_DF6|MFPR_ALT1) -#define GPIO55_CIF_DD6 (55|MFPR_DF6|MFPR_ALT1) -#define GPIO56_CIF_DD7 (56|MFPR_DF6|MFPR_ALT1) -#define GPIO57_CIF_DD8 (57|MFPR_DF6|MFPR_ALT1) -#define GPIO58_CIF_DD9 (58|MFPR_DF6|MFPR_ALT1) -#define GPIO59_CIF_MCLK (59|MFPR_DF6|MFPR_ALT1) -#define GPIO60_CIF_PCLK (60|MFPR_DF6|MFPR_ALT1) -#define GPIO61_CIF_LV (61|MFPR_DF6|MFPR_ALT1) -#define GPIO62_CIF_FV (62|MFPR_DF6|MFPR_ALT1) -#define GPIO63_LCD_LDD_8 (63|MFPR_DF6|MFPR_ALT1) -#define GPIO64_LCD_LDD_9 (64|MFPR_DF6|MFPR_ALT1) -#define GPIO65_LCD_LDD_10 (65|MFPR_DF6|MFPR_ALT1) -#define GPIO66_LCD_LDD_11 (66|MFPR_DF6|MFPR_ALT1) -#define GPIO67_LCD_LDD_12 (67|MFPR_DF6|MFPR_ALT1) -#define GPIO68_LCD_LDD_13 (68|MFPR_DF6|MFPR_ALT1) -#define GPIO69_LCD_LDD_14 (69|MFPR_DF6|MFPR_ALT1) -#define GPIO70_LCD_LDD_15 (70|MFPR_DF6|MFPR_ALT1) -#define GPIO71_LCD_LDD_16 (71|MFPR_DF6|MFPR_ALT1) -#define GPIO72_LCD_LDD_17 (72|MFPR_DF6|MFPR_ALT1) -#define GPIO73_LCD_CS (73|MFPR_DF6|MFPR_ALT2) -#define GPIO74_LCD_VSYNC (74|MFPR_DF6|MFPR_ALT2) -#define GPIO89_SSP3_SCLK (89|MFPR_DS6|MFPR_ALT1) -#define GPIO90_SSP3_SFRM (90|MFPR_DS6|MFPR_ALT1) -#define GPIO91_SSP3_TXD (91|MFPR_DS6|MFPR_ALT1) -#define GPIO92_SSP3_RXD (92|MFPR_DS6|MFPR_ALT1) -#define GPIO93_SSP4_SCLK (93|MFPR_DS6|MFPR_ALT1) -#define GPIO94_SSP4_SFRM (94|MFPR_DS6|MFPR_ALT1) -#define GPIO95_SSP4_TXD (95|MFPR_DS6|MFPR_ALT1) -#define GPIO96_SSP4_RXD (96|MFPR_DS6|MFPR_ALT1) -#define GPIO100_USB_P2_4 (100|MFPR_DS6|MFPR_ALT2) -#define GPIO101_USB_P2_8 (101|MFPR_DS6|MFPR_ALT2) -#define GPIO102_USB_P2_3 (102|MFPR_DS6|MFPR_ALT2) -#define GPIO103_USB_P2_5 (103|MFPR_DS6|MFPR_ALT2) -#define GPIO104_USB_P2_7 (104|MFPR_DS6|MFPR_ALT2) -#define GPIO105_KP_DKIN_0 (105|MFPR_DS6|MFPR_ALT2) -#define GPIO106_KP_DKIN_1 (106|MFPR_DS6|MFPR_ALT2) -#define GPIO107_STD_UART3_TXD (107|MFPR_DS6|MFPR_ALT1) -#define GPIO108_STD_UART3_RXD (108|MFPR_DS6|MFPR_ALT1) -#define GPIO109_BT_UART2_RTS (109|MFPR_DS6|MFPR_ALT1) -#define GPIO110_BT_UART2_RXD (110|MFPR_DS6|MFPR_ALT1) -#define GPIO111_BT_UART2_TXD (111|MFPR_DS6|MFPR_ALT1) -#define GPIO112_BT_UART2_CTS (112|MFPR_DS6|MFPR_ALT1) -#define GPIO113_KP_MKIN_0 (113|MFPR_DS6|MFPR_ALT1) -#define GPIO114_KP_MKIN_1 (114|MFPR_DS6|MFPR_ALT1) -#define GPIO115_KP_MKIN_2 (115|MFPR_DS6|MFPR_ALT1) -#define GPIO116_KP_MKIN_3 (116|MFPR_DS6|MFPR_ALT1) -#define GPIO117_KP_MKIN_4 (117|MFPR_DS6|MFPR_ALT1) -#define GPIO118_KP_MKIN_5 (118|MFPR_DS6|MFPR_ALT1) -#define GPIO119_KP_MKIN_6 (119|MFPR_DS6|MFPR_ALT1) -#define GPIO120_KP_MKIN_7 (120|MFPR_DS6|MFPR_ALT1) -#define GPIO121_KP_MKOUT_0 (121|MFPR_DS6|MFPR_ALT1) -#define GPIO122_KP_MKOUT_1 (122|MFPR_DS6|MFPR_ALT1) -#define GPIO123_KP_MKOUT_2 (123|MFPR_DS6|MFPR_ALT1) -#define GPIO124_KP_MKOUT_3 (124|MFPR_DS6|MFPR_ALT1) -#define GPIO125_KP_MKOUT_4 (125|MFPR_DS6|MFPR_ALT1) -#define GPIO126_KP_MKOUT_5 (126|MFPR_DS6|MFPR_ALT1) -#define GPIO127_KP_MKOUT_6 (127|MFPR_DS6|MFPR_ALT1) -#define GPIO5_2_KP_MKOUT_7 (133|MFPR_DS6|MFPR_ALT1) -#define GPIO6_2_LCD_LDD_0 (134|MFPR_DS6|MFPR_ALT1) -#define GPIO7_2_LCD_LDD_1 (135|MFPR_DS6|MFPR_ALT1) -#define GPIO8_2_LCD_LDD_2 (136|MFPR_DS6|MFPR_ALT1) -#define GPIO9_2_LCD_LDD_3 (137|MFPR_DS6|MFPR_ALT1) -#define GPIO10_2_LCD_LDD_4 (138|MFPR_DS6|MFPR_ALT1) -#define GPIO11_2_LCD_LDD_5 (139|MFPR_DS6|MFPR_ALT1) -#define GPIO12_2_LCD_LDD_6 (140|MFPR_DS6|MFPR_ALT1) -#define GPIO13_2_LCD_LDD_7 (141|MFPR_DS6|MFPR_ALT1) -#define GPIO14_2_LCD_FCLK (142|MFPR_DS6|MFPR_ALT1) -#define GPIO15_2_LCD_LCLK (143|MFPR_DS6|MFPR_ALT1) -#define GPIO16_2_LCD_PCLK (144|MFPR_DS6|MFPR_ALT1) -#define GPIO17_2_LCD_BIAS (145|MFPR_DS6|MFPR_ALT1) - -/* Internal System Bus Arbiter */ -#define ARB_CNTRL1 __REG_2(0x4600FE00) /* PX1 Bus Arbiter Control Register */ -#define ARB_CNTRL2 __REG_2(0x4600FE80) /* PX2 Bus Arbiter Control Register */ +#define CCSR __REG(0x4130000C) /* Core Clock Status Register */ -/* - * Keypad - */ -#define KPC __REG(0x41500000) /* Keypad Interface Control register */ -#define KPDK __REG(0x41500008) /* Keypad Interface Direct Key register */ -#define KPREC __REG(0x41500010) /* Keypad Interface Rotary Encoder register */ -#define KPMK __REG(0x41500018) /* Keypad Interface Matrix Key register */ -#define KPAS __REG(0x41500020) /* Keypad Interface Automatic Scan register */ -#define KPASMKP0 __REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */ -#define KPASMKP1 __REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */ -#define KPASMKP2 __REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */ -#define KPASMKP3 __REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */ -#define KPKDI __REG(0x41500048) /* Keypad Interface Key Debounce Interval register */ - -#define KPC_AS (0x1 << 30) /* Automatic Scan bit */ -#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */ -#define KPC_MI (0x1 << 22) /* Matrix interrupt bit */ -#define KPC_IMKP (0x1 << 21) /* Ignore Multiple Key Press */ -#define KPC_MS7 (0x1 << 20) /* Matrix scan line 7 */ -#define KPC_MS6 (0x1 << 19) /* Matrix scan line 6 */ -#define KPC_MS5 (0x1 << 18) /* Matrix scan line 5 */ -#define KPC_MS4 (0x1 << 17) /* Matrix scan line 4 */ -#define KPC_MS3 (0x1 << 16) /* Matrix scan line 3 */ -#define KPC_MS2 (0x1 << 15) /* Matrix scan line 2 */ -#define KPC_MS1 (0x1 << 14) /* Matrix scan line 1 */ -#define KPC_MS0 (0x1 << 13) /* Matrix scan line 0 */ -#define KPC_MS_ALL (KPC_MS0 | KPC_MS1 | KPC_MS2 | KPC_MS3 | KPC_MS4 | KPC_MS5 | KPC_MS6 | KPC_MS7) -#define KPC_ME (0x1 << 12) /* Matrix Keypad Enable */ -#define KPC_MIE (0x1 << 11) /* Matrix Interrupt Enable */ -#define KPC_DK_DEB_SEL (0x1 << 9) /* Direct Keypad Debounce Select */ -#define KPC_DI (0x1 << 5) /* Direct key interrupt bit */ -#define KPC_RE_ZERO_DEB (0x1 << 4) /* Rotary Encoder Zero Debounce */ -#define KPC_REE1 (0x1 << 3) /* Rotary Encoder1 Enable */ -#define KPC_REE0 (0x1 << 2) /* Rotary Encoder0 Enable */ -#define KPC_DE (0x1 << 1) /* Direct Keypad Enable */ -#define KPC_DIE (0x1 << 0) /* Direct Keypad interrupt Enable */ - -#define KPDK_DKP (0x1 << 31) -#define KPDK_DK7 (0x1 << 7) -#define KPDK_DK6 (0x1 << 6) -#define KPDK_DK5 (0x1 << 5) -#define KPDK_DK4 (0x1 << 4) -#define KPDK_DK3 (0x1 << 3) -#define KPDK_DK2 (0x1 << 2) -#define KPDK_DK1 (0x1 << 1) -#define KPDK_DK0 (0x1 << 0) - -#define KPREC_OF1 (0x1 << 31) -#define kPREC_UF1 (0x1 << 30) -#define KPREC_OF0 (0x1 << 15) -#define KPREC_UF0 (0x1 << 14) - -#define KPMK_MKP (0x1 << 31) -#define KPAS_SO (0x1 << 31) -#define KPASMKPx_SO (0x1 << 31) +#define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */ +#define CKEN22_MEMC (1 << 22) /* Memory Controler */ +#define CKEN21_MSHC (1 << 21) /* Memery Stick Host Controller */ +#define CKEN20_IM (1 << 20) /* Internal Memory Clock Enable */ +#define CKEN19_KEYPAD (1 << 19) /* Keypad Interface Clock Enable */ +#define CKEN18_USIM (1 << 18) /* USIM Unit Clock Enable */ +#define CKEN17_MSL (1 << 17) /* MSL Interface Unit Clock Enable */ +#define CKEN15_PWR_I2C (1 << 15) /* PWR_I2C Unit Clock Enable */ +#define CKEN9_OST (1 << 9) /* OS Timer Unit Clock Enable */ +#define CKEN4_SSP3 (1 << 4) /* SSP3 Unit Clock Enable */ -/* - * UHC: USB Host Controller (OHCI-like) register definitions - */ -#define UHC_BASE_PHYS (0x4C000000) -#define UHCREV __REG_2(0x4C000000) /* UHC HCI Spec Revision */ -#define UHCHCON __REG_2(0x4C000004) /* UHC Host Control Register */ -#define UHCCOMS __REG_2(0x4C000008) /* UHC Command Status Register */ -#define UHCINTS __REG_2(0x4C00000C) /* UHC Interrupt Status Register */ -#define UHCINTE __REG_2(0x4C000010) /* UHC Interrupt Enable */ -#define UHCINTD __REG_2(0x4C000014) /* UHC Interrupt Disable */ -#define UHCHCCA __REG_2(0x4C000018) /* UHC Host Controller Comm. Area */ -#define UHCPCED __REG_2(0x4C00001C) /* UHC Period Current Endpt Descr */ -#define UHCCHED __REG_2(0x4C000020) /* UHC Control Head Endpt Descr */ -#define UHCCCED __REG_2(0x4C000024) /* UHC Control Current Endpt Descr */ -#define UHCBHED __REG_2(0x4C000028) /* UHC Bulk Head Endpt Descr */ -#define UHCBCED __REG_2(0x4C00002C) /* UHC Bulk Current Endpt Descr */ -#define UHCDHEAD __REG_2(0x4C000030) /* UHC Done Head */ -#define UHCFMI __REG_2(0x4C000034) /* UHC Frame Interval */ -#define UHCFMR __REG_2(0x4C000038) /* UHC Frame Remaining */ -#define UHCFMN __REG_2(0x4C00003C) /* UHC Frame Number */ -#define UHCPERS __REG_2(0x4C000040) /* UHC Periodic Start */ -#define UHCLS __REG_2(0x4C000044) /* UHC Low Speed Threshold */ -#define UHCRHDA __REG_2(0x4C000048) /* UHC Root Hub Descriptor A */ -#define UHCRHDB __REG_2(0x4C00004C) /* UHC Root Hub Descriptor B */ -#define UHCRHS __REG_2(0x4C000050) /* UHC Root Hub Status */ -#define UHCRHPS1 __REG_2(0x4C000054) /* UHC Root Hub Port 1 Status */ -#define UHCRHPS2 __REG_2(0x4C000058) /* UHC Root Hub Port 2 Status */ -#define UHCRHPS3 __REG_2(0x4C00005C) /* UHC Root Hub Port 3 Status */ -#define UHCRHPS(x) __REG2_2(0x4C000050, (x)<<2) - -#define UHCSTAT __REG_2(0x4C000060) /* UHC Status Register */ -#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */ -#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/ -#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/ -#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */ -#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */ -#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */ -#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */ -#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */ -#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */ - -#define UHCHR __REG_2(0x4C000064) /* UHC Reset Register */ -#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */ -#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */ -#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */ -#define UHCHR_PCPL (1 << 7) /* Power control polarity low */ -#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */ -#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */ -#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */ -#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */ -#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */ -#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */ -#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */ - -#define UHCHIE __REG_2(0x4C000068) /* UHC Interrupt Enable Register*/ -#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */ -#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */ -#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */ -#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */ -#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort - Interrupt Enable*/ -#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */ -#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */ - -#define UHCHIT __REG_2(0x4C00006C) /* UHC Interrupt Test register */ - -/* Camera Interface / Quick Capture Interface */ -#define CICR0 __REG_3(0x50000000) /* Control register 0 */ -#define CICR1 __REG_3(0x50000004) /* Control register 1 */ -#define CICR2 __REG_3(0x50000008) /* Control register 2 */ -#define CICR3 __REG_3(0x5000000C) /* Control register 3 */ -#define CICR4 __REG_3(0x50000010) /* Control register 4 */ -#define CISR __REG_3(0x50000014) /* Status register */ -#define CITOR __REG_3(0x5000001C) /* Time-Out register */ -#define CIBR0 __REG_3(0x50000028) /* Channel 0 Receive Buffer */ -#define CIBR1 __REG_3(0x50000030) /* Channel 1 Receive Buffer */ -#define CIBR2 __REG_3(0x50000038) /* Channel 2 Receive Buffer */ -#define CIBR3 __REG_3(0x50000040) /* Channel 3 Receive Buffer */ - -#define CIPSS __REG_3(0x50000064) /* Pixel Substitution Status register */ -#define CIPBUF __REG_3(0x50000068) /* Pixel Substitution Buffer */ -#define CIHST __REG_3(0x5000006C) /* Histogram Configuration */ -#define CISUM __REG_3(0x50000070) /* Histogram Summation register */ -#define CICCR __REG_3(0x50000074) /* Compander Configuration */ -#define CISSC __REG_3(0x5000007C) /* Spatial Scaling Configuration */ - -#define CICMR __REG_3(0x50000090) /* Color Management register */ -#define CICMC0 __REG_3(0x50000094) /* Color Management Coefficients 0 */ -#define CICMC1 __REG_3(0x50000098) /* Color Management Coefficients 1 */ -#define CICMC2 __REG_3(0x5000009C) /* Color Management Coefficients 2 */ - -#define CIFR0 __REG_3(0x500000B0) /* FIFO Control register 0 */ -#define CIFR1 __REG_3(0x500000B4) /* FIFO Control register 1 */ -#define CIFSR __REG_3(0x500000C0) /* FIFO Status register */ - -#define CIDADR0 __REG_3(0x50000240) /* DMA Descriptor Address Channel 0 register */ -#define CIDADR1 __REG_3(0x50000250) /* DMA Descriptor Address Channel 1 register */ -#define CIDADR2 __REG_3(0x50000260) /* DMA Descriptor Address Channel 2 register */ -#define CIDADR3 __REG_3(0x50000270) /* DMA Descriptor Address Channel 3 register */ -#define CITADR0 __REG_3(0x50000244) /* DMA Target Address Channel 0 register */ -#define CITADR1 __REG_3(0x50000254) /* DMA Target Address Channel 1 register */ -#define CITADR2 __REG_3(0x50000264) /* DMA Target Address Channel 2 register */ -#define CITADR3 __REG_3(0x50000274) /* DMA Target Address Channel 3 register */ -#define CISADR0 __REG_3(0x50000248) /* DMA Source Address Channel 0 register */ -#define CISADR1 __REG_3(0x50000258) /* DMA Source Address Channel 1 register */ -#define CISADR2 __REG_3(0x50000268) /* DMA Source Address Channel 2 register */ -#define CISADR3 __REG_3(0x50000278) /* DMA Source Address Channel 3 register */ -#define CICMD0 __REG_3(0x5000024C) /* DMA Command Channel 0 register*/ -#define CICMD1 __REG_3(0x5000025C) /* DMA Command Channel 1 register*/ -#define CICMD2 __REG_3(0x5000026C) /* DMA Command Channel 2 register*/ -#define CICMD3 __REG_3(0x5000027C) /* DMA Command Channel 3 register*/ -#define CIDBR0 __REG_3(0x50000220) /* DMA Branch Channel 0 register*/ -#define CIDBR1 __REG_3(0x50000224) /* DMA Branch Channel 1 register*/ -#define CIDBR2 __REG_3(0x50000228) /* DMA Branch Channel 2 register*/ -#define CIDBR3 __REG_3(0x5000022C) /* DMA Branch Channel 3 register*/ -#define CIDCSR0 __REG_3(0x50000200) /* DMA Ctrl/Status Channel 0 register*/ -#define CIDCSR1 __REG_3(0x50000204) /* DMA Ctrl/Status Channel 1 register*/ -#define CIDCSR2 __REG_3(0x50000208) /* DMA Ctrl/Status Channel 2 register*/ -#define CIDCSR3 __REG_3(0x5000020C) /* DMA Ctrl/Status Channel 3 register*/ - -#define CICR0_DMAEN (1 << 31) /* DMA request enable */ -#define CICR0_PAR_EN (1 << 30) /* Parity enable */ -#define CICR0_SL_CAP_EN (1 << 29) /* Capture enable for slave mode */ -#define CICR0_ENB (1 << 28) /* Camera interface enable */ -#define CICR0_DIS (1 << 27) /* Camera interface disable */ -#define CICR0_SIM (0x7 << 24) /* Sensor interface mode mask */ -#define CICR0_TOM (1 << 9) /* Time-out mask */ -#define CICR0_RDAVM (1 << 8) /* Receive-data-available mask */ -#define CICR0_FEM (1 << 7) /* FIFO-empty mask */ -#define CICR0_EOLM (1 << 6) /* End-of-line mask */ -#define CICR0_PERRM (1 << 5) /* Parity-error mask */ -#define CICR0_QDM (1 << 4) /* Quick-disable mask */ -#define CICR0_CDM (1 << 3) /* Disable-done mask */ -#define CICR0_SOFM (1 << 2) /* Start-of-frame mask */ -#define CICR0_EOFM (1 << 1) /* End-of-frame mask */ -#define CICR0_FOM (1 << 0) /* FIFO-overrun mask */ - -#define CICR1_TBIT (1 << 31) /* Transparency bit */ -#define CICR1_RGBT_CONV (0x3 << 30) /* RGBT conversion mask */ -#define CICR1_PPL (0x3f << 15) /* Pixels per line mask */ -#define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */ -#define CICR1_RGB_F (1 << 11) /* RGB format */ -#define CICR1_YCBCR_F (1 << 10) /* YCbCr format */ -#define CICR1_RGB_BPP (0x7 << 7) /* RGB bis per pixel mask */ -#define CICR1_RAW_BPP (0x3 << 5) /* Raw bis per pixel mask */ -#define CICR1_COLOR_SP (0x3 << 3) /* Color space mask */ -#define CICR1_DW (0x7 << 0) /* Data width mask */ - -#define CICR2_BLW (0xff << 24) /* Beginning-of-line pixel clock - wait count mask */ -#define CICR2_ELW (0xff << 16) /* End-of-line pixel clock - wait count mask */ -#define CICR2_HSW (0x3f << 10) /* Horizontal sync pulse width mask */ -#define CICR2_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock - wait count mask */ -#define CICR2_FSW (0x7 << 0) /* Frame stabilization - wait count mask */ - -#define CICR3_BFW (0xff << 24) /* Beginning-of-frame line clock - wait count mask */ -#define CICR3_EFW (0xff << 16) /* End-of-frame line clock - wait count mask */ -#define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */ -#define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock - wait count mask */ -#define CICR3_LPF (0x3ff << 0) /* Lines per frame mask */ - -#define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */ -#define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */ -#define CICR4_PCP (1 << 22) /* Pixel clock polarity */ -#define CICR4_HSP (1 << 21) /* Horizontal sync polarity */ -#define CICR4_VSP (1 << 20) /* Vertical sync polarity */ -#define CICR4_MCLK_EN (1 << 19) /* MCLK enable */ -#define CICR4_FR_RATE (0x7 << 8) /* Frame rate mask */ -#define CICR4_DIV (0xff << 0) /* Clock divisor mask */ - -#define CISR_FTO (1 << 15) /* FIFO time-out */ -#define CISR_RDAV_2 (1 << 14) /* Channel 2 receive data available */ -#define CISR_RDAV_1 (1 << 13) /* Channel 1 receive data available */ -#define CISR_RDAV_0 (1 << 12) /* Channel 0 receive data available */ -#define CISR_FEMPTY_2 (1 << 11) /* Channel 2 FIFO empty */ -#define CISR_FEMPTY_1 (1 << 10) /* Channel 1 FIFO empty */ -#define CISR_FEMPTY_0 (1 << 9) /* Channel 0 FIFO empty */ -#define CISR_EOL (1 << 8) /* End of line */ -#define CISR_PAR_ERR (1 << 7) /* Parity error */ -#define CISR_CQD (1 << 6) /* Camera interface quick disable */ -#define CISR_SOF (1 << 5) /* Start of frame */ -#define CISR_CDD (1 << 4) /* Camera interface disable done */ -#define CISR_EOF (1 << 3) /* End of frame */ -#define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */ -#define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */ -#define CISR_IFO_0 (1 << 0) /* FIFO overrun for Channel 0 */ - -#define CIFR_FLVL2 (0x7f << 23) /* FIFO 2 level mask */ -#define CIFR_FLVL1 (0x7f << 16) /* FIFO 1 level mask */ -#define CIFR_FLVL0 (0xff << 8) /* FIFO 0 level mask */ -#define CIFR_THL_0 (0x3 << 4) /* Threshold Level for Channel 0 FIFO */ -#define CIFR_RESET_F (1 << 3) /* Reset input FIFOs */ -#define CIFR_FEN2 (1 << 2) /* FIFO enable for channel 2 */ -#define CIFR_FEN1 (1 << 1) /* FIFO enable for channel 1 */ -#define CIFR_FEN0 (1 << 0) /* FIFO enable for channel 0 */ - -#endif /* CONFIG_CPU_MONAHANS */ +/* Memory controller */ -#endif +#define MDREFR_K0DB4 (1 << 29) /* SDCLK[0] divide by 4 */ + +/* LCD registers */ +#define LCCR4 __REG(0x44000010) /* LCD Controller Control Register 4 */ +#define LCCR5 __REG(0x44000014) /* LCD Controller Control Register 5 */ +#define FBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */ +#define FBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */ +#define FBR2 __REG(0x44000028) /* DMA Channel 2 Frame Branch Register */ +#define FBR3 __REG(0x4400002C) /* DMA Channel 3 Frame Branch Register */ +#define FBR4 __REG(0x44000030) /* DMA Channel 4 Frame Branch Register */ +#define FDADR2 __REG(0x44000220) /* DMA Channel 2 Frame Descriptor Address Register */ +#define FSADR2 __REG(0x44000224) /* DMA Channel 2 Frame Source Address Register */ +#define FIDR2 __REG(0x44000228) /* DMA Channel 2 Frame ID Register */ +#define LDCMD2 __REG(0x4400022C) /* DMA Channel 2 Command Register */ +#define FDADR3 __REG(0x44000230) /* DMA Channel 3 Frame Descriptor Address Register */ +#define FSADR3 __REG(0x44000234) /* DMA Channel 3 Frame Source Address Register */ +#define FIDR3 __REG(0x44000238) /* DMA Channel 3 Frame ID Register */ +#define LDCMD3 __REG(0x4400023C) /* DMA Channel 3 Command Register */ +#define FDADR4 __REG(0x44000240) /* DMA Channel 4 Frame Descriptor Address Register */ +#define FSADR4 __REG(0x44000244) /* DMA Channel 4 Frame Source Address Register */ +#define FIDR4 __REG(0x44000248) /* DMA Channel 4 Frame ID Register */ +#define LDCMD4 __REG(0x4400024C) /* DMA Channel 4 Command Register */ +#define FDADR5 __REG(0x44000250) /* DMA Channel 5 Frame Descriptor Address Register */ +#define FSADR5 __REG(0x44000254) /* DMA Channel 5 Frame Source Address Register */ +#define FIDR5 __REG(0x44000258) /* DMA Channel 5 Frame ID Register */ +#define LDCMD5 __REG(0x4400025C) /* DMA Channel 5 Command Register */ + +#define OVL1C1 __REG(0x44000050) /* Overlay 1 Control Register 1 */ +#define OVL1C2 __REG(0x44000060) /* Overlay 1 Control Register 2 */ +#define OVL2C1 __REG(0x44000070) /* Overlay 2 Control Register 1 */ +#define OVL2C2 __REG(0x44000080) /* Overlay 2 Control Register 2 */ +#define CCR __REG(0x44000090) /* Cursor Control Register */ + +#define FBR5 __REG(0x44000110) /* DMA Channel 5 Frame Branch Register */ +#define FBR6 __REG(0x44000114) /* DMA Channel 6 Frame Branch Register */ + +#define LCCR0_LDDALT (1<<26) /* LDD Alternate mapping bit when base pixel is RGBT16 */ +#define LCCR0_OUC (1<<25) /* Overlay Underlay Control Bit */ + +#define LCCR5_SOFM1 (1<<0) /* Start Of Frame Mask for Overlay 1 (channel 1) */ +#define LCCR5_SOFM2 (1<<1) /* Start Of Frame Mask for Overlay 2 (channel 2) */ +#define LCCR5_SOFM3 (1<<2) /* Start Of Frame Mask for Overlay 2 (channel 3) */ +#define LCCR5_SOFM4 (1<<3) /* Start Of Frame Mask for Overlay 2 (channel 4) */ +#define LCCR5_SOFM5 (1<<4) /* Start Of Frame Mask for cursor (channel 5) */ +#define LCCR5_SOFM6 (1<<5) /* Start Of Frame Mask for command data (channel 6) */ + +#define LCCR5_EOFM1 (1<<8) /* End Of Frame Mask for Overlay 1 (channel 1) */ +#define LCCR5_EOFM2 (1<<9) /* End Of Frame Mask for Overlay 2 (channel 2) */ +#define LCCR5_EOFM3 (1<<10) /* End Of Frame Mask for Overlay 2 (channel 3) */ +#define LCCR5_EOFM4 (1<<11) /* End Of Frame Mask for Overlay 2 (channel 4) */ +#define LCCR5_EOFM5 (1<<12) /* End Of Frame Mask for cursor (channel 5) */ +#define LCCR5_EOFM6 (1<<13) /* End Of Frame Mask for command data (channel 6) */ + +#define LCCR5_BSM1 (1<<16) /* Branch mask for Overlay 1 (channel 1) */ +#define LCCR5_BSM2 (1<<17) /* Branch mask for Overlay 2 (channel 2) */ +#define LCCR5_BSM3 (1<<18) /* Branch mask for Overlay 2 (channel 3) */ +#define LCCR5_BSM4 (1<<19) /* Branch mask for Overlay 2 (channel 4) */ +#define LCCR5_BSM5 (1<<20) /* Branch mask for cursor (channel 5) */ +#define LCCR5_BSM6 (1<<21) /* Branch mask for data command (channel 6) */ + +#define LCCR5_IUM1 (1<<24) /* Input FIFO Underrun Mask for Overlay 1 */ +#define LCCR5_IUM2 (1<<25) /* Input FIFO Underrun Mask for Overlay 2 */ +#define LCCR5_IUM3 (1<<26) /* Input FIFO Underrun Mask for Overlay 2 */ +#define LCCR5_IUM4 (1<<27) /* Input FIFO Underrun Mask for Overlay 2 */ +#define LCCR5_IUM5 (1<<28) /* Input FIFO Underrun Mask for cursor */ +#define LCCR5_IUM6 (1<<29) /* Input FIFO Underrun Mask for data command */ + +#define OVL1C1_O1EN (1<<31) /* Enable bit for Overlay 1 */ +#define OVL2C1_O2EN (1<<31) /* Enable bit for Overlay 2 */ +#define CCR_CEN (1<<31) /* Enable bit for Cursor */ + +/* Keypad controller */ + +#define KPC __REG(0x41500000) /* Keypad Interface Control register */ +#define KPDK __REG(0x41500008) /* Keypad Interface Direct Key register */ +#define KPREC __REG(0x41500010) /* Keypad Intefcace Rotary Encoder register */ +#define KPMK __REG(0x41500018) /* Keypad Intefcace Matrix Key register */ +#define KPAS __REG(0x41500020) /* Keypad Interface Automatic Scan register */ +#define KPASMKP0 __REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */ +#define KPASMKP1 __REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */ +#define KPASMKP2 __REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */ +#define KPASMKP3 __REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */ +#define KPKDI __REG(0x41500048) /* Keypad Interface Key Debounce Interval register */ + +#define KPC_AS (0x1 << 30) /* Automatic Scan bit */ +#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */ +#define KPC_MI (0x1 << 22) /* Matrix interrupt bit */ +#define KPC_IMKP (0x1 << 21) /* Ignore Multiple Key Press */ +#define KPC_MS7 (0x1 << 20) /* Matrix scan line 7 */ +#define KPC_MS6 (0x1 << 19) /* Matrix scan line 6 */ +#define KPC_MS5 (0x1 << 18) /* Matrix scan line 5 */ +#define KPC_MS4 (0x1 << 17) /* Matrix scan line 4 */ +#define KPC_MS3 (0x1 << 16) /* Matrix scan line 3 */ +#define KPC_MS2 (0x1 << 15) /* Matrix scan line 2 */ +#define KPC_MS1 (0x1 << 14) /* Matrix scan line 1 */ +#define KPC_MS0 (0x1 << 13) /* Matrix scan line 0 */ +#define KPC_ME (0x1 << 12) /* Matrix Keypad Enable */ +#define KPC_MIE (0x1 << 11) /* Matrix Interrupt Enable */ +#define KPC_DK_DEB_SEL (0x1 << 9) /* Direct Key Debounce select */ +#define KPC_DI (0x1 << 5) /* Direct key interrupt bit */ +#define KPC_DEE0 (0x1 << 2) /* Rotary Encoder 0 Enable */ +#define KPC_DE (0x1 << 1) /* Direct Keypad Enable */ +#define KPC_DIE (0x1 << 0) /* Direct Keypad interrupt Enable */ + +#define KPDK_DKP (0x1 << 31) +#define KPDK_DK7 (0x1 << 7) +#define KPDK_DK6 (0x1 << 6) +#define KPDK_DK5 (0x1 << 5) +#define KPDK_DK4 (0x1 << 4) +#define KPDK_DK3 (0x1 << 3) +#define KPDK_DK2 (0x1 << 2) +#define KPDK_DK1 (0x1 << 1) +#define KPDK_DK0 (0x1 << 0) + +#define KPREC_OF1 (0x1 << 31) +#define kPREC_UF1 (0x1 << 30) +#define KPREC_OF0 (0x1 << 15) +#define KPREC_UF0 (0x1 << 14) + +#define KPMK_MKP (0x1 << 31) +#define KPAS_SO (0x1 << 31) +#define KPASMKPx_SO (0x1 << 31) + +#define GPIO113_BIT (1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */ +#define PSLR __REG(0x40F00034) +#define PSTR __REG(0x40F00038) /* Power Manager Standby Configuration Reg */ +#define PSNR __REG(0x40F0003C) /* Power Manager Sense Configuration Reg */ +#define PVCR __REG(0x40F00040) /* Power Manager Voltage Change Control Reg */ +#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-Up Enable Reg */ +#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Status Reg */ +#define OSMR4 __REG(0x40A00080) /* */ +#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ +#define OMCR4 __REG(0x40A000C0) /* */ + +#endif /* CONFIG_PXA27X */ + +#endif /* _PXA_REGS_H_ */ |