diff options
| -rw-r--r-- | board/atmel/at91sam9rlek/at91sam9rlek.c | 63 | ||||
| -rw-r--r-- | include/configs/at91sam9rlek.h | 13 |
2 files changed, 76 insertions, 0 deletions
diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c index 8deecfd..10423d2 100644 --- a/board/atmel/at91sam9rlek/at91sam9rlek.c +++ b/board/atmel/at91sam9rlek/at91sam9rlek.c @@ -30,6 +30,8 @@ #include <asm/arch/at91_rstc.h> #include <asm/arch/gpio.h> #include <asm/arch/io.h> +#include <lcd.h> +#include <atmel_lcdc.h> #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) #include <net.h> #endif @@ -124,6 +126,64 @@ static void at91sam9rlek_spi_hw_init(void) } #endif +#ifdef CONFIG_LCD +vidinfo_t panel_info = { + vl_col: 240, + vl_row: 320, + vl_clk: 4965000, + vl_sync: ATMEL_LCDC_INVLINE_INVERTED | + ATMEL_LCDC_INVFRAME_INVERTED, + vl_bpix: 3, + vl_tft: 1, + vl_hsync_len: 5, + vl_left_margin: 1, + vl_right_margin:33, + vl_vsync_len: 1, + vl_upper_margin:1, + vl_lower_margin:0, + mmio: AT91SAM9RL_LCDC_BASE, +}; + +void lcd_enable(void) +{ + at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */ +} + +void lcd_disable(void) +{ + at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */ +} +static void at91sam9rlek_lcd_hw_init(void) +{ + at91_set_B_periph(AT91_PIN_PC1, 0); /* LCDPWR */ + at91_set_A_periph(AT91_PIN_PC5, 0); /* LCDHSYNC */ + at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDDOTCK */ + at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDDEN */ + at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDCC */ + at91_set_B_periph(AT91_PIN_PC9, 0); /* LCDD3 */ + at91_set_B_periph(AT91_PIN_PC10, 0); /* LCDD4 */ + at91_set_B_periph(AT91_PIN_PC11, 0); /* LCDD5 */ + at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD6 */ + at91_set_B_periph(AT91_PIN_PC13, 0); /* LCDD7 */ + at91_set_B_periph(AT91_PIN_PC15, 0); /* LCDD11 */ + at91_set_B_periph(AT91_PIN_PC16, 0); /* LCDD12 */ + at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD13 */ + at91_set_B_periph(AT91_PIN_PC18, 0); /* LCDD14 */ + at91_set_B_periph(AT91_PIN_PC19, 0); /* LCDD15 */ + at91_set_B_periph(AT91_PIN_PC20, 0); /* LCDD18 */ + at91_set_B_periph(AT91_PIN_PC21, 0); /* LCDD19 */ + at91_set_B_periph(AT91_PIN_PC22, 0); /* LCDD20 */ + at91_set_B_periph(AT91_PIN_PC23, 0); /* LCDD21 */ + at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */ + at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */ + + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_LCDC); + + gd->fb_base = 0; +} +#endif + + int board_init(void) { /* Enable Ctrlc */ @@ -141,6 +201,9 @@ int board_init(void) #ifdef CONFIG_HAS_DATAFLASH at91sam9rlek_spi_hw_init(); #endif +#ifdef CONFIG_LCD + at91sam9rlek_lcd_hw_init(); +#endif return 0; } diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index 773f954..33d934f 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -28,6 +28,7 @@ #define __CONFIG_H /* ARM asynchronous clock */ +#define AT91_CPU_NAME "AT91SAM9RL" #define AT91_MAIN_CLOCK 200000000 /* from 12.000 MHz crystal */ #define AT91_MASTER_CLOCK 100000000 /* peripheral = main / 2 */ #define CFG_HZ 1000000 /* 1us resolution */ @@ -55,6 +56,18 @@ #undef CONFIG_USART2 #define CONFIG_USART3 1 /* USART 3 is DBGU */ +/* LCD */ +#define CONFIG_LCD 1 +#define LCD_BPP LCD_COLOR8 +#define CONFIG_LCD_LOGO 1 +#undef LCD_TEST_PATTERN +#define CONFIG_LCD_INFO 1 +#define CONFIG_LCD_INFO_BELOW_LOGO 1 +#define CFG_WHITE_ON_BLACK 1 +#define CONFIG_ATMEL_LCD 1 +#define CONFIG_ATMEL_LCD_RGB565 1 +#define CFG_CONSOLE_IS_IN_ENV 1 + #define CONFIG_BOOTDELAY 3 /* #define CONFIG_ENV_OVERWRITE 1 */ |