diff options
| -rw-r--r-- | cpu/mpc83xx/cpu.c | 20 | ||||
| -rw-r--r-- | cpu/mpc85xx/cpu.c | 33 | ||||
| -rw-r--r-- | cpu/mpc86xx/cpu.c | 26 | ||||
| -rw-r--r-- | drivers/net/tsec.c | 113 | ||||
| -rw-r--r-- | include/tsec.h | 32 |
5 files changed, 102 insertions, 122 deletions
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index 52e4476..5862acd 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -32,6 +32,7 @@ #include <mpc83xx.h> #include <asm/processor.h> #include <libfdt.h> +#include <tsec.h> DECLARE_GLOBAL_DATA_PTR; @@ -358,22 +359,15 @@ int dma_xfer(void *dest, u32 count, void *src) } #endif /*CONFIG_DDR_ECC*/ -#ifdef CONFIG_TSEC_ENET -/* Default initializations for TSEC controllers. To override, - * create a board-specific function called: - * int board_eth_init(bd_t *bis) +/* + * Initializes on-chip ethernet controllers. + * to override, implement board_eth_init() */ - -extern int tsec_initialize(bd_t * bis, int index, char *devname); - int cpu_eth_init(bd_t *bis) { -#if defined(CONFIG_TSEC1) - tsec_initialize(bis, 0, CONFIG_TSEC1_NAME); -#endif -#if defined(CONFIG_TSEC2) - tsec_initialize(bis, 1, CONFIG_TSEC2_NAME); +#if defined(CONFIG_TSEC_ENET) + tsec_standard_init(bis); #endif + return 0; } -#endif diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c index 2fe3cea..7976cac 100644 --- a/cpu/mpc85xx/cpu.c +++ b/cpu/mpc85xx/cpu.c @@ -25,9 +25,11 @@ * MA 02111-1307 USA */ +#include <config.h> #include <common.h> #include <watchdog.h> #include <command.h> +#include <tsec.h> #include <asm/cache.h> #include <asm/io.h> @@ -294,6 +296,7 @@ int dma_xfer(void *dest, uint count, void *src) { return dma_check(); } #endif + /* * Configures a UPM. Currently, the loop fields in MxMR (RLF, WLF and TLF) * are hardcoded as "1"."size" is the number or entries, not a sizeof. @@ -360,32 +363,16 @@ void upmconfig (uint upm, uint * table, uint size) out_be32(mxmr, loopval); /* OP_NORMAL */ } -#if defined(CONFIG_TSEC_ENET) || defined(CONFIGMPC85XX_FEC) -/* Default initializations for TSEC controllers. To override, - * create a board-specific function called: - * int board_eth_init(bd_t *bis) - */ - -extern int tsec_initialize(bd_t * bis, int index, char *devname); +/* + * Initializes on-chip ethernet controllers. + * to override, implement board_eth_init() + */ int cpu_eth_init(bd_t *bis) { -#if defined(CONFIG_TSEC1) - tsec_initialize(bis, 0, CONFIG_TSEC1_NAME); -#endif -#if defined(CONFIG_TSEC2) - tsec_initialize(bis, 1, CONFIG_TSEC2_NAME); -#endif -#if defined(CONFIG_MPC85XX_FEC) - tsec_initialize(bis, 2, CONFIG_MPC85XX_FEC_NAME); -#else -#if defined(CONFIG_TSEC3) - tsec_initialize(bis, 2, CONFIG_TSEC3_NAME); -#endif -#if defined(CONFIG_TSEC4) - tsec_initialize(bis, 3, CONFIG_TSEC4_NAME); -#endif +#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_MPC85xx_FEC) + tsec_standard_init(bis); #endif + return 0; } -#endif diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c index ecea5b0..3a75af7 100644 --- a/cpu/mpc86xx/cpu.c +++ b/cpu/mpc86xx/cpu.c @@ -28,6 +28,7 @@ #include <asm/cache.h> #include <asm/mmu.h> #include <mpc86xx.h> +#include <tsec.h> #include <asm/fsl_law.h> @@ -305,28 +306,15 @@ void mpc86xx_reginfo(void) } -#ifdef CONFIG_TSEC_ENET -/* Default initializations for TSEC controllers. To override, - * create a board-specific function called: - * int board_eth_init(bd_t *bis) +/* + * Initializes on-chip ethernet controllers. + * to override, implement board_eth_init() */ - -extern int tsec_initialize(bd_t * bis, int index, char *devname); - int cpu_eth_init(bd_t *bis) { -#if defined(CONFIG_TSEC1) - tsec_initialize(bis, 0, CONFIG_TSEC1_NAME); -#endif -#if defined(CONFIG_TSEC2) - tsec_initialize(bis, 1, CONFIG_TSEC2_NAME); -#endif -#if defined(CONFIG_TSEC3) - tsec_initialize(bis, 2, CONFIG_TSEC3_NAME); -#endif -#if defined(CONFIG_TSEC4) - tsec_initialize(bis, 3, CONFIG_TSEC4_NAME); +#if defined(CONFIG_TSEC_ENET) + tsec_standard_init(bis); #endif + return 0; } -#endif /* CONFIG_TSEC_ENET */ diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index 59d41e9..fbbdd3d 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -32,63 +32,12 @@ typedef volatile struct rtxbd { rxbd8_t rxbd[PKTBUFSRX]; } RTXBD; -/* The tsec_info structure contains 3 values which the - * driver uses to determine how to operate a given ethernet - * device. The information needed is: - * phyaddr - The address of the PHY which is attached to - * the given device. - * - * flags - This variable indicates whether the device - * supports gigabit speed ethernet, and whether it should be - * in reduced mode. - * - * phyregidx - This variable specifies which ethernet device - * controls the MII Management registers which are connected - * to the PHY. For now, only TSEC1 (index 0) has - * access to the PHYs, so all of the entries have "0". - * - * The values specified in the table are taken from the board's - * config file in include/configs/. When implementing a new - * board with ethernet capability, it is necessary to define: - * TSECn_PHY_ADDR - * TSECn_PHYIDX - * - * for n = 1,2,3, etc. And for FEC: - * FEC_PHY_ADDR - * FEC_PHYIDX - */ -static struct tsec_info_struct tsec_info[] = { -#ifdef CONFIG_TSEC1 - {TSEC1_PHY_ADDR, TSEC1_FLAGS, TSEC1_PHYIDX}, -#else - {0, 0, 0}, -#endif -#ifdef CONFIG_TSEC2 - {TSEC2_PHY_ADDR, TSEC2_FLAGS, TSEC2_PHYIDX}, -#else - {0, 0, 0}, -#endif -#ifdef CONFIG_MPC85XX_FEC - {FEC_PHY_ADDR, FEC_FLAGS, FEC_PHYIDX}, -#else -#ifdef CONFIG_TSEC3 - {TSEC3_PHY_ADDR, TSEC3_FLAGS, TSEC3_PHYIDX}, -#else - {0, 0, 0}, -#endif -#ifdef CONFIG_TSEC4 - {TSEC4_PHY_ADDR, TSEC4_FLAGS, TSEC4_PHYIDX}, -#else - {0, 0, 0}, -#endif /* CONFIG_TSEC4 */ -#endif /* CONFIG_MPC85XX_FEC */ -}; - -#define MAXCONTROLLERS (4) +#define MAXCONTROLLERS (8) static int relocated = 0; static struct tsec_private *privlist[MAXCONTROLLERS]; +static int num_tsecs = 0; #ifdef __GNUC__ static RTXBD rtx __attribute__ ((aligned(8))); @@ -121,10 +70,51 @@ static int tsec_miiphy_read(char *devname, unsigned char addr, static int tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set); #endif +/* Default initializations for TSEC controllers. */ + +static struct tsec_info_struct tsec_info[] = { +#ifdef CONFIG_TSEC1 + STD_TSEC_INFO(1), /* TSEC1 */ +#endif +#ifdef CONFIG_TSEC2 + STD_TSEC_INFO(2), /* TSEC2 */ +#endif +#ifdef CONFIG_MPC85XX_FEC + { + .regs = (tsec_t *)(TSEC_BASE_ADDR + 0x2000), + .miiregs = (tsec_t *)(TSEC_BASE_ADDR), + .devname = CONFIG_MPC85XX_FEC_NAME, + .phyaddr = FEC_PHY_ADDR, + .flags = FEC_FLAGS + }, /* FEC */ +#endif +#ifdef CONFIG_TSEC3 + STD_TSEC_INFO(3), /* TSEC3 */ +#endif +#ifdef CONFIG_TSEC4 + STD_TSEC_INFO(4), /* TSEC4 */ +#endif +}; + +int tsec_eth_init(bd_t *bis, struct tsec_info_struct *tsecs, int num) +{ + int i; + + for (i = 0; i < num; i++) + tsec_initialize(bis, &tsecs[i]); + + return 0; +} + +int tsec_standard_init(bd_t *bis) +{ + return tsec_eth_init(bis, tsec_info, ARRAY_SIZE(tsec_info)); +} + /* Initialize device structure. Returns success if PHY * initialization succeeded (i.e. if it recognizes the PHY) */ -int tsec_initialize(bd_t * bis, int index, char *devname) +int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info) { struct eth_device *dev; int i; @@ -142,16 +132,14 @@ int tsec_initialize(bd_t * bis, int index, char *devname) if (NULL == priv) return 0; - privlist[index] = priv; - priv->regs = (volatile tsec_t *)(TSEC_BASE_ADDR + index * TSEC_SIZE); - priv->phyregs = (volatile tsec_t *)(TSEC_BASE_ADDR + - tsec_info[index].phyregidx * - TSEC_SIZE); + privlist[num_tsecs++] = priv; + priv->regs = tsec_info->regs; + priv->phyregs = tsec_info->miiregs; - priv->phyaddr = tsec_info[index].phyaddr; - priv->flags = tsec_info[index].flags; + priv->phyaddr = tsec_info->phyaddr; + priv->flags = tsec_info->flags; - sprintf(dev->name, devname); + sprintf(dev->name, tsec_info->devname); dev->iobase = 0; dev->priv = priv; dev->init = tsec_init; @@ -226,7 +214,6 @@ int tsec_init(struct eth_device *dev, bd_t * bd) /* If there's no link, fail */ return (priv->link ? 0 : -1); - } /* Write value to the device's PHY through the registers diff --git a/include/tsec.h b/include/tsec.h index 83863ae..c05b5f0 100644 --- a/include/tsec.h +++ b/include/tsec.h @@ -27,12 +27,30 @@ #define TSEC_SIZE 0x01000 /* FIXME: Should these be pushed back to 83xx and 85xx config files? */ -#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) - #define TSEC_BASE_ADDR (CFG_IMMR + CFG_TSEC1_OFFSET) -#elif defined(CONFIG_MPC83XX) +#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) \ + || defined(CONFIG_MPC83XX) #define TSEC_BASE_ADDR (CFG_IMMR + CFG_TSEC1_OFFSET) #endif +#define STD_TSEC_INFO(num) \ +{ \ + .regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)), \ + .miiregs = (tsec_t *)TSEC_BASE_ADDR, \ + .devname = CONFIG_TSEC##num##_NAME, \ + .phyaddr = TSEC##num##_PHY_ADDR, \ + .flags = TSEC##num##_FLAGS \ +} + +#define SET_STD_TSEC_INFO(x, num) \ +{ \ + x.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)); \ + x.miiregs = (tsec_t *)TSEC_BASE_ADDR; \ + x.devname = CONFIG_TSEC##num##_NAME; \ + x.phyaddr = TSEC##num##_PHY_ADDR; \ + x.flags = TSEC##num##_FLAGS;\ +} + + #define MAC_ADDR_LEN 6 @@ -584,9 +602,15 @@ struct phy_info { }; struct tsec_info_struct { + tsec_t *regs; + tsec_t *miiregs; + char *devname; unsigned int phyaddr; u32 flags; - unsigned int phyregidx; }; +int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info); +int tsec_standard_init(bd_t *bis); +int tsec_eth_init(bd_t *bis, struct tsec_info_struct *tsec_info, int num); + #endif /* __TSEC_H */ |