summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--common/cmd_mii.c8
-rw-r--r--common/miiphyutil.c151
-rw-r--r--include/miiphy.h22
3 files changed, 121 insertions, 60 deletions
diff --git a/common/cmd_mii.c b/common/cmd_mii.c
index 72e11d5..3b4dc8a 100644
--- a/common/cmd_mii.c
+++ b/common/cmd_mii.c
@@ -112,9 +112,11 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
"OUI = 0x%04X, "
"Model = 0x%02X, "
"Rev = 0x%02X, "
- "%3dbaseT, %s\n",
+ "%3dbase%s, %s\n",
j, oui, model, rev,
miiphy_speed (devname, j),
+ miiphy_is_1000base_x (devname, j)
+ ? "X" : "T",
(miiphy_duplex (devname, j) == FULL)
? "FDX" : "HDX");
}
@@ -496,9 +498,11 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
"OUI = 0x%04X, "
"Model = 0x%02X, "
"Rev = 0x%02X, "
- "%3dbaseT, %s\n",
+ "%3dbase%s, %s\n",
j, oui, model, rev,
miiphy_speed (devname, j),
+ miiphy_is_1000base_x (devname, j)
+ ? "X" : "T",
(miiphy_duplex (devname, j) == FULL)
? "FDX" : "HDX");
}
diff --git a/common/miiphyutil.c b/common/miiphyutil.c
index 58ebc5e..281f0b2 100644
--- a/common/miiphyutil.c
+++ b/common/miiphyutil.c
@@ -344,101 +344,136 @@ int miiphy_reset (char *devname, unsigned char addr)
/*****************************************************************************
*
- * Determine the ethernet speed (10/100).
+ * Determine the ethernet speed (10/100/1000). Return 10 on error.
*/
int miiphy_speed (char *devname, unsigned char addr)
{
- unsigned short reg;
+ u16 bmcr, anlpar;
#if defined(CONFIG_PHY_GIGE)
- if (miiphy_read (devname, addr, PHY_1000BTSR, &reg)) {
- printf ("PHY 1000BT Status read failed\n");
- } else {
- if (reg != 0xFFFF) {
- if ((reg & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD))
- != 0) {
- return (_1000BASET);
- }
- }
+ u16 btsr;
+
+ /*
+ * Check for 1000BASE-X. If it is supported, then assume that the speed
+ * is 1000.
+ */
+ if (miiphy_is_1000base_x (devname, addr)) {
+ return _1000BASET;
+ }
+ /*
+ * No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
+ */
+ /* Check for 1000BASE-T. */
+ if (miiphy_read (devname, addr, PHY_1000BTSR, &btsr)) {
+ printf ("PHY 1000BT status");
+ goto miiphy_read_failed;
+ }
+ if (btsr != 0xFFFF &&
+ (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD))) {
+ return _1000BASET;
}
#endif /* CONFIG_PHY_GIGE */
/* Check Basic Management Control Register first. */
- if (miiphy_read (devname, addr, PHY_BMCR, &reg)) {
- puts ("PHY speed read failed, assuming 10bT\n");
- return (_10BASET);
+ if (miiphy_read (devname, addr, PHY_BMCR, &bmcr)) {
+ printf ("PHY speed");
+ goto miiphy_read_failed;
}
/* Check if auto-negotiation is on. */
- if ((reg & PHY_BMCR_AUTON) != 0) {
+ if (bmcr & PHY_BMCR_AUTON) {
/* Get auto-negotiation results. */
- if (miiphy_read (devname, addr, PHY_ANLPAR, &reg)) {
- puts ("PHY AN speed read failed, assuming 10bT\n");
- return (_10BASET);
- }
- if ((reg & PHY_ANLPAR_100) != 0) {
- return (_100BASET);
- } else {
- return (_10BASET);
+ if (miiphy_read (devname, addr, PHY_ANLPAR, &anlpar)) {
+ printf ("PHY AN speed");
+ goto miiphy_read_failed;
}
+ return (anlpar & PHY_ANLPAR_100) ? _100BASET : _10BASET;
}
/* Get speed from basic control settings. */
- else if (reg & PHY_BMCR_100MB) {
- return (_100BASET);
- } else {
- return (_10BASET);
- }
+ return (bmcr & PHY_BMCR_100MB) ? _100BASET : _10BASET;
+ miiphy_read_failed:
+ printf (" read failed, assuming 10BASE-T\n");
+ return _10BASET;
}
/*****************************************************************************
*
- * Determine full/half duplex.
+ * Determine full/half duplex. Return half on error.
*/
int miiphy_duplex (char *devname, unsigned char addr)
{
- unsigned short reg;
+ u16 bmcr, anlpar;
#if defined(CONFIG_PHY_GIGE)
- if (miiphy_read (devname, addr, PHY_1000BTSR, &reg)) {
- printf ("PHY 1000BT Status read failed\n");
- } else {
- if ((reg != 0xFFFF) &&
- (reg & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD))) {
- if ((reg & PHY_1000BTSR_1000FD) != 0) {
- return (FULL);
- } else {
- return (HALF);
- }
+ u16 btsr;
+
+ /* Check for 1000BASE-X. */
+ if (miiphy_is_1000base_x (devname, addr)) {
+ /* 1000BASE-X */
+ if (miiphy_read (devname, addr, PHY_ANLPAR, &anlpar)) {
+ printf ("1000BASE-X PHY AN duplex");
+ goto miiphy_read_failed;
+ }
+ }
+ /*
+ * No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
+ */
+ /* Check for 1000BASE-T. */
+ if (miiphy_read (devname, addr, PHY_1000BTSR, &btsr)) {
+ printf ("PHY 1000BT status");
+ goto miiphy_read_failed;
+ }
+ if (btsr != 0xFFFF) {
+ if (btsr & PHY_1000BTSR_1000FD) {
+ return FULL;
+ } else if (btsr & PHY_1000BTSR_1000HD) {
+ return HALF;
}
}
#endif /* CONFIG_PHY_GIGE */
/* Check Basic Management Control Register first. */
- if (miiphy_read (devname, addr, PHY_BMCR, &reg)) {
- puts ("PHY duplex read failed, assuming half duplex\n");
- return (HALF);
+ if (miiphy_read (devname, addr, PHY_BMCR, &bmcr)) {
+ puts ("PHY duplex");
+ goto miiphy_read_failed;
}
/* Check if auto-negotiation is on. */
- if ((reg & PHY_BMCR_AUTON) != 0) {
+ if (bmcr & PHY_BMCR_AUTON) {
/* Get auto-negotiation results. */
- if (miiphy_read (devname, addr, PHY_ANLPAR, &reg)) {
- puts ("PHY AN duplex read failed, assuming half duplex\n");
- return (HALF);
- }
-
- if ((reg & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD)) != 0) {
- return (FULL);
- } else {
- return (HALF);
+ if (miiphy_read (devname, addr, PHY_ANLPAR, &anlpar)) {
+ puts ("PHY AN duplex");
+ goto miiphy_read_failed;
}
+ return (anlpar & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD)) ?
+ FULL : HALF;
}
/* Get speed from basic control settings. */
- else if (reg & PHY_BMCR_DPLX) {
- return (FULL);
- } else {
- return (HALF);
- }
+ return (bmcr & PHY_BMCR_DPLX) ? FULL : HALF;
+
+ miiphy_read_failed:
+ printf (" read failed, assuming half duplex\n");
+ return HALF;
+}
+/*****************************************************************************
+ *
+ * Return 1 if PHY supports 1000BASE-X, 0 if PHY supports 10BASE-T/100BASE-TX/
+ * 1000BASE-T, or on error.
+ */
+int miiphy_is_1000base_x (char *devname, unsigned char addr)
+{
+#if defined(CONFIG_PHY_GIGE)
+ u16 exsr;
+
+ if (miiphy_read (devname, addr, PHY_EXSR, &exsr)) {
+ printf ("PHY extended status read failed, assuming no "
+ "1000BASE-X\n");
+ return 0;
+ }
+ return 0 != (exsr & (PHY_EXSR_1000XF | PHY_EXSR_1000XH));
+#else
+ return 0;
+#endif
}
#ifdef CFG_FAULT_ECHO_LINK_DOWN
diff --git a/include/miiphy.h b/include/miiphy.h
index 42f2ad0..5518a0a 100644
--- a/include/miiphy.h
+++ b/include/miiphy.h
@@ -41,6 +41,7 @@ int miiphy_info (char *devname, unsigned char addr, unsigned int *oui,
int miiphy_reset (char *devname, unsigned char addr);
int miiphy_speed (char *devname, unsigned char addr);
int miiphy_duplex (char *devname, unsigned char addr);
+int miiphy_is_1000base_x (char *devname, unsigned char addr);
#ifdef CFG_FAULT_ECHO_LINK_DOWN
int miiphy_link (char *devname, unsigned char addr);
#endif
@@ -85,6 +86,7 @@ int bb_miiphy_write (char *devname, unsigned char addr,
#define PHY_ANLPNP 0x08
#define PHY_1000BTCR 0x09
#define PHY_1000BTSR 0x0A
+#define PHY_EXSR 0x0F
#define PHY_PHYSTS 0x10
#define PHY_MIPSCR 0x11
#define PHY_MIPGSR 0x12
@@ -118,6 +120,7 @@ int bb_miiphy_write (char *devname, unsigned char addr,
#define PHY_BMSR_100TXH 0x2000
#define PHY_BMSR_10TF 0x1000
#define PHY_BMSR_10TH 0x0800
+#define PHY_BMSR_EXT_STAT 0x0100
#define PHY_BMSR_PRE_SUP 0x0040
#define PHY_BMSR_AUTN_COMP 0x0020
#define PHY_BMSR_RF 0x0010
@@ -130,17 +133,30 @@ int bb_miiphy_write (char *devname, unsigned char addr,
#define PHY_ANLPAR_NP 0x8000
#define PHY_ANLPAR_ACK 0x4000
#define PHY_ANLPAR_RF 0x2000
+#define PHY_ANLPAR_ASYMP 0x0800
+#define PHY_ANLPAR_PAUSE 0x0400
#define PHY_ANLPAR_T4 0x0200
#define PHY_ANLPAR_TXFD 0x0100
#define PHY_ANLPAR_TX 0x0080
#define PHY_ANLPAR_10FD 0x0040
#define PHY_ANLPAR_10 0x0020
#define PHY_ANLPAR_100 0x0380 /* we can run at 100 */
+/* phy ANLPAR 1000BASE-X */
+#define PHY_X_ANLPAR_NP 0x8000
+#define PHY_X_ANLPAR_ACK 0x4000
+#define PHY_X_ANLPAR_RF_MASK 0x3000
+#define PHY_X_ANLPAR_PAUSE_MASK 0x0180
+#define PHY_X_ANLPAR_HD 0x0040
+#define PHY_X_ANLPAR_FD 0x0020
#define PHY_ANLPAR_PSB_MASK 0x001f
#define PHY_ANLPAR_PSB_802_3 0x0001
#define PHY_ANLPAR_PSB_802_9 0x0002
+/* phy 1000BTCR */
+#define PHY_1000BTCR_1000FD 0x0200
+#define PHY_1000BTCR_1000HD 0x0100
+
/* phy 1000BTSR */
#define PHY_1000BTSR_MSCF 0x8000
#define PHY_1000BTSR_MSCR 0x4000
@@ -149,4 +165,10 @@ int bb_miiphy_write (char *devname, unsigned char addr,
#define PHY_1000BTSR_1000FD 0x0800
#define PHY_1000BTSR_1000HD 0x0400
+/* phy EXSR */
+#define PHY_EXSR_1000XF 0x8000
+#define PHY_EXSR_1000XH 0x4000
+#define PHY_EXSR_1000TF 0x2000
+#define PHY_EXSR_1000TH 0x1000
+
#endif
generated by cgit v1.1 at 2024-11-16 00:40:45 +0000