summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Makefile3
-rw-r--r--board/freescale/common/recovery.c32
-rw-r--r--board/freescale/mx51_3stack/mx51_3stack.c5
-rw-r--r--board/freescale/mx51_bbg/mx51_bbg.c3
-rw-r--r--board/freescale/mx53_evk/mx53_evk.c151
-rw-r--r--drivers/input/mxc_keyb.c2
-rw-r--r--include/asm-arm/arch-mx51/mx51.h2
-rw-r--r--include/asm-arm/arch-mx53/mx53.h3
-rw-r--r--include/asm-arm/mxc_key_defs.h (renamed from include/asm-arm/arch-mx51/keypad.h)0
-rw-r--r--include/configs/mx51_3stack_android.h3
-rw-r--r--include/configs/mx51_bbg_android.h2
-rw-r--r--include/configs/mx53_arm2_android.h295
-rw-r--r--include/configs/mx53_arm2_ddr3_android.h277
-rw-r--r--include/configs/mx53_evk_android.h295
14 files changed, 1049 insertions, 24 deletions
diff --git a/Makefile b/Makefile
index 9e4ce95..42a0e97 100644
--- a/Makefile
+++ b/Makefile
@@ -3270,6 +3270,9 @@ mx51_3stack_config : unconfig
mx53_evk_mfg_config \
mx53_arm2_ddr3_config \
mx53_arm2_config \
+mx53_arm2_android_config \
+mx53_arm2_ddr3_android_config \
+mx53_evk_android_config \
mx53_evk_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 mx53_evk freescale mx53
diff --git a/board/freescale/common/recovery.c b/board/freescale/common/recovery.c
index d133a9d..9f488b8 100644
--- a/board/freescale/common/recovery.c
+++ b/board/freescale/common/recovery.c
@@ -11,19 +11,19 @@
#include <common.h>
#include <malloc.h>
#include "recovery.h"
-
-#ifndef CONFIG_MXC_KPD
-#error "error! keypad must be configured to support recovery"
-#endif
+#ifdef CONFIG_MXC_KPD
#include <mxc_keyb.h>
+#endif
+
+extern int check_recovery_cmd_file(void);
+extern enum boot_device get_boot_device(void);
+
+#ifdef CONFIG_MXC_KPD
#define PRESSED_HOME 0x01
#define PRESSED_POWER 0x02
#define RECOVERY_KEY_MASK (PRESSED_HOME | PRESSED_POWER)
-extern int check_recovery_cmd_file(void);
-extern enum boot_device get_boot_device(void);
-
inline int test_key(int value, struct kpp_key_info *ki)
{
return (ki->val == value) && (ki->evt == KDepress);
@@ -57,6 +57,13 @@ int check_key_pressing(void)
return 0;
}
+#else
+/* If not using mxc keypad, currently we will detect power key on board */
+int check_key_pressing(void)
+{
+ return 0;
+}
+#endif
extern struct reco_envs supported_reco_envs[];
@@ -78,17 +85,16 @@ void setup_recovery_env(void)
env = getenv("bootargs_android_recovery");
/* Set env to recovery mode */
if (!env)
- setenv("bootargs_android", boot_args);
+ setenv("bootargs_android_recovery", boot_args);
else
- setenv("bootargs_android", env);
+ setenv("bootargs_android_recovery", env);
env = getenv("bootcmd_android_recovery");
if (!env)
- setenv("bootcmd_android", boot_cmd);
+ setenv("bootcmd_android_recovery", boot_cmd);
else
- setenv("bootcmd_android", env);
- setenv("bootcmd", "run bootcmd_android");
-
+ setenv("bootcmd_android_recovery", env);
+ setenv("bootcmd", "run bootcmd_android_recovery");
}
/* export to lib_arm/board.c */
diff --git a/board/freescale/mx51_3stack/mx51_3stack.c b/board/freescale/mx51_3stack/mx51_3stack.c
index 77da23c..4c773ad 100644
--- a/board/freescale/mx51_3stack/mx51_3stack.c
+++ b/board/freescale/mx51_3stack/mx51_3stack.c
@@ -29,7 +29,6 @@
#include <asm/arch/mx51_pins.h>
#include <asm/arch/iomux.h>
#include <i2c.h>
-#include <asm/arch/keypad.h>
#include "board-mx51_3stack.h"
#include <netdev.h>
@@ -613,7 +612,7 @@ int board_init(void)
}
#ifdef CONFIG_ANDROID_RECOVERY
-struct reco_envs supported_reco_envs[END_BOOT] = {
+struct reco_envs supported_reco_envs[BOOT_DEV_NUM] = {
{
.cmd = CONFIG_ANDROID_RECOVERY_BOOTCMD_NAND,
.args = CONFIG_ANDROID_RECOVERY_BOOTARGS_NAND,
@@ -759,7 +758,7 @@ static int check_nand_recovery_cmd_file(char *mtd_part_name,
return filelen;
}
-static int check_recovery_cmd_file(void)
+int check_recovery_cmd_file(void)
{
int if_exist = 0;
char *env = NULL;
diff --git a/board/freescale/mx51_bbg/mx51_bbg.c b/board/freescale/mx51_bbg/mx51_bbg.c
index 83e8ca7..e90337b 100644
--- a/board/freescale/mx51_bbg/mx51_bbg.c
+++ b/board/freescale/mx51_bbg/mx51_bbg.c
@@ -29,7 +29,6 @@
#include <asm/arch/iomux.h>
#include <asm/errno.h>
#include <i2c.h>
-#include <asm/arch/keypad.h>
#include "board-imx51.h"
#ifdef CONFIG_IMX_ECSPI
#include <imx_spi.h>
@@ -874,7 +873,7 @@ int board_init(void)
}
#ifdef CONFIG_ANDROID_RECOVERY
-struct reco_envs supported_reco_envs[END_BOOT] = {
+struct reco_envs supported_reco_envs[BOOT_DEV_NUM] = {
{
.cmd = NULL,
.args = NULL,
diff --git a/board/freescale/mx53_evk/mx53_evk.c b/board/freescale/mx53_evk/mx53_evk.c
index 2f5c4b1..92b6ce9 100644
--- a/board/freescale/mx53_evk/mx53_evk.c
+++ b/board/freescale/mx53_evk/mx53_evk.c
@@ -52,6 +52,16 @@
#include <asm/clock.h>
#endif
+#ifdef CONFIG_ANDROID_RECOVERY
+#include "../common/recovery.h"
+#include <part.h>
+#include <ext2fs.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <ubi_uboot.h>
+#include <jffs2/load_kernel.h>
+#endif
+
DECLARE_GLOBAL_DATA_PTR;
static u32 system_rev;
@@ -647,6 +657,26 @@ static void setup_fec(void)
}
#endif
+#if defined(CONFIG_MXC_KPD)
+int setup_mxc_kpd(void)
+{
+ mxc_request_iomux(MX53_PIN_KEY_COL0, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_KEY_COL1, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_KEY_COL2, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_KEY_COL3, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_KEY_COL4, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_GPIO_19, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_KEY_ROW0, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_KEY_ROW1, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_KEY_ROW2, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_KEY_ROW3, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_KEY_ROW4, IOMUX_CONFIG_ALT0);
+
+ return 0;
+}
+#endif
+
+
#ifdef CONFIG_CMD_MMC
struct fsl_esdhc_cfg esdhc_cfg[2] = {
@@ -776,6 +806,127 @@ int board_init(void)
return 0;
}
+
+#ifdef CONFIG_ANDROID_RECOVERY
+struct reco_envs supported_reco_envs[BOOT_DEV_NUM] = {
+ {
+ .cmd = NULL,
+ .args = NULL,
+ },
+ {
+ .cmd = NULL,
+ .args = NULL,
+ },
+ {
+ .cmd = NULL,
+ .args = NULL,
+ },
+ {
+ .cmd = NULL,
+ .args = NULL,
+ },
+ {
+ .cmd = NULL,
+ .args = NULL,
+ },
+ {
+ .cmd = NULL,
+ .args = NULL,
+ },
+ {
+ .cmd = CONFIG_ANDROID_RECOVERY_BOOTCMD_MMC,
+ .args = CONFIG_ANDROID_RECOVERY_BOOTCMD_MMC,
+ },
+ {
+ .cmd = CONFIG_ANDROID_RECOVERY_BOOTCMD_MMC,
+ .args = CONFIG_ANDROID_RECOVERY_BOOTARGS_MMC,
+ },
+ {
+ .cmd = NULL,
+ .args = NULL,
+ },
+};
+
+int check_recovery_cmd_file(void)
+{
+ disk_partition_t info;
+ ulong part_length;
+ int filelen;
+ char *env;
+
+ /* For test only */
+ /* When detecting android_recovery_switch,
+ * enter recovery mode directly */
+ env = getenv("android_recovery_switch");
+ if (!strcmp(env, "1")) {
+ printf("Env recovery detected!\nEnter recovery mode!\n");
+ return 1;
+ }
+
+ printf("Checking for recovery command file...\n");
+ switch (get_boot_device()) {
+ case MMC_BOOT:
+ case SD_BOOT:
+ {
+ block_dev_desc_t *dev_desc = NULL;
+ struct mmc *mmc = find_mmc_device(0);
+
+ dev_desc = get_dev("mmc", 0);
+
+ if (NULL == dev_desc) {
+ puts("** Block device MMC 0 not supported\n");
+ return 0;
+ }
+
+ mmc_init(mmc);
+
+ if (get_partition_info(dev_desc,
+ CONFIG_ANDROID_CACHE_PARTITION_MMC,
+ &info)) {
+ printf("** Bad partition %d **\n",
+ CONFIG_ANDROID_CACHE_PARTITION_MMC);
+ return 0;
+ }
+
+ part_length = ext2fs_set_blk_dev(dev_desc,
+ CONFIG_ANDROID_CACHE_PARTITION_MMC);
+ if (part_length == 0) {
+ printf("** Bad partition - mmc 0:%d **\n",
+ CONFIG_ANDROID_CACHE_PARTITION_MMC);
+ ext2fs_close();
+ return 0;
+ }
+
+ if (!ext2fs_mount(part_length)) {
+ printf("** Bad ext2 partition or "
+ "disk - mmc 0:%d **\n",
+ CONFIG_ANDROID_CACHE_PARTITION_MMC);
+ ext2fs_close();
+ return 0;
+ }
+
+ filelen = ext2fs_open(CONFIG_ANDROID_RECOVERY_CMD_FILE);
+
+ ext2fs_close();
+ }
+ break;
+ case NAND_BOOT:
+ return 0;
+ break;
+ case SPI_NOR_BOOT:
+ return 0;
+ break;
+ case UNKNOWN_BOOT:
+ default:
+ return 0;
+ break;
+ }
+
+ return (filelen > 0) ? 1 : 0;
+
+}
+#endif
+
int board_late_init(void)
{
return 0;
diff --git a/drivers/input/mxc_keyb.c b/drivers/input/mxc_keyb.c
index fae3b69..263f743 100644
--- a/drivers/input/mxc_keyb.c
+++ b/drivers/input/mxc_keyb.c
@@ -30,8 +30,8 @@
#include <asm/io.h>
#include <common.h>
#include <asm/errno.h>
-#include <asm/arch/keypad.h>
#include <linux/types.h>
+#include <asm/mxc_key_defs.h>
#include <malloc.h>
/*
diff --git a/include/asm-arm/arch-mx51/mx51.h b/include/asm-arm/arch-mx51/mx51.h
index 816e792..d06abac 100644
--- a/include/asm-arm/arch-mx51/mx51.h
+++ b/include/asm-arm/arch-mx51/mx51.h
@@ -445,7 +445,7 @@ enum boot_device {
NAND_BOOT = 0,
SPI_NOR_BOOT,
MMC_BOOT,
- END_BOOT,
+ BOOT_DEV_NUM,
};
enum mxc_clock {
diff --git a/include/asm-arm/arch-mx53/mx53.h b/include/asm-arm/arch-mx53/mx53.h
index ea04877..8c4f877 100644
--- a/include/asm-arm/arch-mx53/mx53.h
+++ b/include/asm-arm/arch-mx53/mx53.h
@@ -393,7 +393,8 @@ enum boot_device {
SD_BOOT,
MMC_BOOT,
NAND_BOOT,
- UNKNOWN_BOOT
+ UNKNOWN_BOOT,
+ BOOT_DEV_NUM = UNKNOWN_BOOT,
};
enum mxc_clock {
diff --git a/include/asm-arm/arch-mx51/keypad.h b/include/asm-arm/mxc_key_defs.h
index 1e67547..1e67547 100644
--- a/include/asm-arm/arch-mx51/keypad.h
+++ b/include/asm-arm/mxc_key_defs.h
diff --git a/include/configs/mx51_3stack_android.h b/include/configs/mx51_3stack_android.h
index 81eb819..7935c76 100644
--- a/include/configs/mx51_3stack_android.h
+++ b/include/configs/mx51_3stack_android.h
@@ -112,7 +112,7 @@
/*
* Android support Configs
*/
-#include <asm/arch/keypad.h>
+#include <asm/mxc_key_defs.h>
#define CONFIG_ANDROID_RECOVERY
#define CONFIG_POWER_KEY KEY_F2
@@ -213,7 +213,6 @@
#define CONFIG_DOS_PARTITION 1
#define CONFIG_CMD_FAT 1
#define CONFIG_CMD_EXT2 1
- #define CONFIG_SYS_FSL_ESDHC_NUM 1
#endif
/*
diff --git a/include/configs/mx51_bbg_android.h b/include/configs/mx51_bbg_android.h
index 4641222..d4db1c9 100644
--- a/include/configs/mx51_bbg_android.h
+++ b/include/configs/mx51_bbg_android.h
@@ -86,7 +86,7 @@
/*
* Android support Configs
*/
-#include <asm/arch/keypad.h>
+#include <asm/mxc_key_defs.h>
#define CONFIG_ANDROID_RECOVERY
#define CONFIG_POWER_KEY KEY_F3
diff --git a/include/configs/mx53_arm2_android.h b/include/configs/mx53_arm2_android.h
new file mode 100644
index 0000000..3e02620
--- /dev/null
+++ b/include/configs/mx53_arm2_android.h
@@ -0,0 +1,295 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the MX53-ARM2 Freescale board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/mx53.h>
+
+ /* High Level Configuration Options */
+#define CONFIG_ARMV7 /* This is armv7 Cortex-A8 CPU core */
+#define CONFIG_MXC
+#define CONFIG_MX53
+#define CONFIG_MX53_ARM2
+#define CONFIG_FLASH_HEADER
+#define CONFIG_FLASH_HEADER_OFFSET 0x400
+
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_ARCH_MMU
+
+#define CONFIG_MX53_HCLK_FREQ 24000000
+#define CONFIG_SYS_PLL2_FREQ 400
+#define CONFIG_SYS_AHB_PODF 2
+#define CONFIG_SYS_AXIA_PODF 0
+#define CONFIG_SYS_AXIB_PODF 1
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_SYS_64BIT_VSPRINTF
+
+#define BOARD_LATE_INIT
+/*
+ * Disabled for now due to build problems under Debian and a significant
+ * increase in the final file size: 144260 vs. 109536 Bytes.
+ */
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_REVISION_TAG 1
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE 128
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_MX53_UART 1
+#define CONFIG_MX53_UART1 1
+
+/*
+ * Android support Configs
+ */
+#include <asm/mxc_key_defs.h>
+
+#define CONFIG_ANDROID_RECOVERY
+
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+
+#define CONFIG_ANDROID_RECOVERY_BOOTARGS_MMC \
+ "setenv bootargs ${bootargs} init=/init root=/dev/mmcblk0p7 rootfs=ext3"
+#define CONFIG_ANDROID_RECOVERY_BOOTCMD_MMC \
+ "run bootargs_base bootargs_android_recovery;mmc read 0 ${loadaddr} 0x800 0x1800;bootm"
+#define CONFIG_ANDROID_RECOVERY_CMD_FILE "/recovery/command"
+#define CONFIG_ANDROID_CACHE_PARTITION_MMC 6
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_NET_RETRY_COUNT 100
+#define CONFIG_NET_MULTI 1
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_DNS
+
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_ENV
+
+#define CONFIG_CMD_IIM
+
+#define CONFIG_CMD_CLOCK
+#define CONFIG_REF_CLK_FREQ CONFIG_MX53_HCLK_FREQ
+
+#define CONFIG_CMD_SATA
+
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_PRIME "FEC0"
+
+#define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */
+#define CONFIG_RD_LOADADDR (CONFIG_LOADADDR + 0x300000)
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "ethprime=FEC0\0" \
+ "uboot=u-boot.bin\0" \
+ "kernel=uImage\0" \
+ "loadaddr=0x70800000\0" \
+ "rd_loadaddr=0x70B00000\0" \
+ "nfsroot=/opt/eldk/arm\0" \
+ "bootargs_base=setenv bootargs console=ttymxc0,115200\0"\
+ "bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs "\
+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0"\
+ "bootargs_android=setenv bootargs ${bootargs} ip=dhcp mem=480M init=/init wvga calibration\0" \
+ "bootcmd=run bootcmd_android\0" \
+ "bootcmd_net=run bootargs_base bootargs_nfs; " \
+ "tftpboot ${loadaddr} ${kernel}; bootm\0" \
+ "bootcmd_android=run bootargs_base bootargs_android; " \
+ "mmcinit;cp.b 0x100000 ${loadaddr} 0x250000; " \
+ "cp.b 0x400000 ${rd_loadaddr} 0x4B000; " \
+ "bootm ${loadaddr} ${rd_loadaddr}\0" \
+
+
+#define CONFIG_ARP_TIMEOUT 200UL
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "MX53 ARM2 U-Boot > "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+
+#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x10000
+
+#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_CMDLINE_EDITING 1
+
+#define CONFIG_FEC0_IOBASE FEC_BASE_ADDR
+#define CONFIG_FEC0_PINMUX -1
+#define CONFIG_FEC0_PHY_ADDR -1
+#define CONFIG_FEC0_MIIBASE -1
+
+#define CONFIG_GET_FEC_MAC_ADDR_FROM_IIM
+#define CONFIG_IIM_MAC_ADDR_OFFSET 0x24
+
+#define CONFIG_MXC_FEC
+#define CONFIG_MII
+#define CONFIG_MII_GASKET
+#define CONFIG_DISCOVER_PHY
+
+/*
+ * FUSE Configs
+ * */
+#ifdef CONFIG_CMD_MMC
+ #define CONFIG_IMX_IIM
+ #define IMX_IIM_BASE IIM_BASE_ADDR
+ #define CONFIG_IIM_MAC_BANK 1
+ #define CONFIG_IIM_MAC_ROW 9
+#endif
+
+/*
+ * I2C Configs
+ */
+#define CONFIG_CMD_I2C 1
+#define CONFIG_HARD_I2C 1
+#define CONFIG_I2C_MXC 1
+#define CONFIG_SYS_I2C_PORT I2C2_BASE_ADDR
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SLAVE 0xfe
+
+
+/*
+ * SPI Configs
+ */
+#define CONFIG_FSL_SF 1
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH_IMX_ATMEL 1
+#define CONFIG_SPI_FLASH_CS 1
+#define CONFIG_IMX_ECSPI
+#define IMX_CSPI_VER_2_3 1
+#define MAX_SPI_BYTES (64 * 4)
+
+/*
+ * MMC Configs
+ */
+#ifdef CONFIG_CMD_MMC
+ #define CONFIG_MMC 1
+ #define CONFIG_GENERIC_MMC
+ #define CONFIG_IMX_MMC
+ #define CONFIG_SYS_FSL_ESDHC_NUM 2
+ #define CONFIG_SYS_FSL_ESDHC_ADDR 0
+ #define CONFIG_SYS_MMC_ENV_DEV 1
+ #define CONFIG_DOS_PARTITION 1
+ #define CONFIG_CMD_FAT 1
+ #define CONFIG_CMD_EXT2 1
+
+ #define CONFIG_BOOT_PARTITION_ACCESS
+#endif
+
+/*
+ * SATA Configs
+ */
+#ifdef CONFIG_CMD_SATA
+ #define CONFIG_DWC_AHSATA
+ #define CONFIG_SYS_SATA_MAX_DEVICE 1
+ #define CONFIG_DWC_AHSATA_PORT_ID 0
+ #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR
+ #define CONFIG_LBA48
+ #define CONFIG_LIBATA
+#endif
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 CSD0_BASE_ADDR
+#define PHYS_SDRAM_1_SIZE (1024 * 1024 * 1024)
+#define iomem_valid_addr(addr, size) \
+ (addr >= PHYS_SDRAM_1 && addr <= \
+ (unsigned long)(PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE))
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_NO_FLASH
+
+/* Monitor at beginning of flash */
+#define CONFIG_FSL_ENV_IN_MMC
+
+#define CONFIG_ENV_SECT_SIZE (128 * 1024)
+#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
+
+#if defined(CONFIG_FSL_ENV_IN_NAND)
+ #define CONFIG_ENV_IS_IN_NAND 1
+ #define CONFIG_ENV_OFFSET 0x100000
+#elif defined(CONFIG_FSL_ENV_IN_MMC)
+ #define CONFIG_ENV_IS_IN_MMC 1
+ #define CONFIG_ENV_OFFSET (768 * 1024)
+#elif defined(CONFIG_FSL_ENV_IN_SF)
+ #define CONFIG_ENV_IS_IN_SPI_FLASH 1
+ #define CONFIG_ENV_SPI_CS 1
+ #define CONFIG_ENV_OFFSET (768 * 1024)
+#else
+ #define CONFIG_ENV_IS_NOWHERE 1
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/mx53_arm2_ddr3_android.h b/include/configs/mx53_arm2_ddr3_android.h
new file mode 100644
index 0000000..dc97ba2
--- /dev/null
+++ b/include/configs/mx53_arm2_ddr3_android.h
@@ -0,0 +1,277 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the MX53-ARM2-DDR3 Freescale board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/mx53.h>
+
+ /* High Level Configuration Options */
+#define CONFIG_ARMV7 /* This is armv7 Cortex-A8 CPU core */
+#define CONFIG_MXC
+#define CONFIG_MX53
+#define CONFIG_MX53_ARM2_DDR3
+#define CONFIG_FLASH_HEADER
+#define CONFIG_FLASH_HEADER_OFFSET 0x400
+
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_ARCH_MMU
+
+#define CONFIG_MX53_HCLK_FREQ 24000000
+#define CONFIG_SYS_PLL2_FREQ 400
+#define CONFIG_SYS_AHB_PODF 2
+#define CONFIG_SYS_AXIA_PODF 0
+#define CONFIG_SYS_AXIB_PODF 1
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_SYS_64BIT_VSPRINTF
+
+#define BOARD_LATE_INIT
+/*
+ * Disabled for now due to build problems under Debian and a significant
+ * increase in the final file size: 144260 vs. 109536 Bytes.
+ */
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_REVISION_TAG 1
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE 128
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_MX53_UART 1
+#define CONFIG_MX53_UART1 1
+
+/*
+ * Android support Configs
+ */
+#include <asm/mxc_key_defs.h>
+
+#define CONFIG_ANDROID_RECOVERY
+
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+
+#define CONFIG_ANDROID_RECOVERY_BOOTARGS_MMC \
+ "setenv bootargs ${bootargs} init=/init root=/dev/mmcblk0p7 rootfs=ext3"
+#define CONFIG_ANDROID_RECOVERY_BOOTCMD_MMC \
+ "run bootargs_base bootargs_android_recovery;mmc read 0 ${loadaddr} 0x800 0x1800;bootm"
+#define CONFIG_ANDROID_RECOVERY_CMD_FILE "/recovery/command"
+#define CONFIG_ANDROID_CACHE_PARTITION_MMC 6
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_NET_RETRY_COUNT 100
+#define CONFIG_NET_MULTI 1
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_DNS
+
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_ENV
+
+#define CONFIG_CMD_IIM
+
+#define CONFIG_CMD_CLOCK
+#define CONFIG_REF_CLK_FREQ CONFIG_MX53_HCLK_FREQ
+
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_PRIME "FEC0"
+
+#define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */
+#define CONFIG_RD_LOADADDR (CONFIG_LOADADDR + 0x300000)
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "ethprime=FEC0\0" \
+ "uboot=u-boot.bin\0" \
+ "kernel=uImage\0" \
+ "loadaddr=0x70800000\0" \
+ "rd_loadaddr=0x70B00000\0" \
+ "nfsroot=/opt/eldk/arm\0" \
+ "bootargs_base=setenv bootargs console=ttymxc0,115200\0"\
+ "bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs "\
+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0"\
+ "bootargs_android=setenv bootargs ${bootargs} ip=dhcp mem=480M init=/init wvga calibration\0" \
+ "bootcmd=run bootcmd_android\0" \
+ "bootcmd_net=run bootargs_base bootargs_nfs; " \
+ "tftpboot ${loadaddr} ${kernel}; bootm\0" \
+ "bootcmd_android=run bootargs_base bootargs_android; " \
+ "mmcinit;cp.b 0x100000 ${loadaddr} 0x250000; " \
+ "cp.b 0x400000 ${rd_loadaddr} 0x4B000; " \
+ "bootm ${loadaddr} ${rd_loadaddr}\0" \
+
+
+#define CONFIG_ARP_TIMEOUT 200UL
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "MX53 ARM2-DDR3 U-Boot > "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+
+#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x10000
+
+#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_CMDLINE_EDITING 1
+
+#define CONFIG_FEC0_IOBASE FEC_BASE_ADDR
+#define CONFIG_FEC0_PINMUX -1
+#define CONFIG_FEC0_PHY_ADDR -1
+#define CONFIG_FEC0_MIIBASE -1
+
+#define CONFIG_GET_FEC_MAC_ADDR_FROM_IIM
+#define CONFIG_IIM_MAC_ADDR_OFFSET 0x24
+
+#define CONFIG_MXC_FEC
+#define CONFIG_MII
+#define CONFIG_MII_GASKET
+#define CONFIG_DISCOVER_PHY
+
+/*
+ * FUSE Configs
+ * */
+#ifdef CONFIG_CMD_MMC
+ #define CONFIG_IMX_IIM
+ #define IMX_IIM_BASE IIM_BASE_ADDR
+ #define CONFIG_IIM_MAC_BANK 1
+ #define CONFIG_IIM_MAC_ROW 9
+#endif
+
+/*
+ * I2C Configs
+ */
+#define CONFIG_CMD_I2C 1
+#define CONFIG_HARD_I2C 1
+#define CONFIG_I2C_MXC 1
+#define CONFIG_SYS_I2C_PORT I2C2_BASE_ADDR
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SLAVE 0xfe
+
+
+/*
+ * SPI Configs
+ */
+#define CONFIG_FSL_SF 1
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH_IMX_ATMEL 1
+#define CONFIG_SPI_FLASH_CS 1
+#define CONFIG_IMX_ECSPI
+#define IMX_CSPI_VER_2_3 1
+#define MAX_SPI_BYTES (64 * 4)
+
+/*
+ * MMC Configs
+ */
+#ifdef CONFIG_CMD_MMC
+ #define CONFIG_MMC 1
+ #define CONFIG_GENERIC_MMC
+ #define CONFIG_IMX_MMC
+ #define CONFIG_SYS_FSL_ESDHC_NUM 2
+ #define CONFIG_SYS_FSL_ESDHC_ADDR 0
+ #define CONFIG_SYS_MMC_ENV_DEV 1
+ #define CONFIG_DOS_PARTITION 1
+ #define CONFIG_CMD_FAT 1
+ #define CONFIG_CMD_EXT2 1
+#endif
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 CSD0_BASE_ADDR
+#define PHYS_SDRAM_1_SIZE (1024 * 1024 * 1024)
+#define iomem_valid_addr(addr, size) \
+ (addr >= PHYS_SDRAM_1 && addr <= (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE))
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_NO_FLASH
+
+/* Monitor at beginning of flash */
+#define CONFIG_FSL_ENV_IN_MMC
+
+#define CONFIG_ENV_SECT_SIZE (128 * 1024)
+#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
+
+#if defined(CONFIG_FSL_ENV_IN_NAND)
+ #define CONFIG_ENV_IS_IN_NAND 1
+ #define CONFIG_ENV_OFFSET 0x100000
+#elif defined(CONFIG_FSL_ENV_IN_MMC)
+ #define CONFIG_ENV_IS_IN_MMC 1
+ #define CONFIG_ENV_OFFSET (768 * 1024)
+#elif defined(CONFIG_FSL_ENV_IN_SF)
+ #define CONFIG_ENV_IS_IN_SPI_FLASH 1
+ #define CONFIG_ENV_SPI_CS 1
+ #define CONFIG_ENV_OFFSET (768 * 1024)
+#else
+ #define CONFIG_ENV_IS_NOWHERE 1
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/mx53_evk_android.h b/include/configs/mx53_evk_android.h
new file mode 100644
index 0000000..d892d33
--- /dev/null
+++ b/include/configs/mx53_evk_android.h
@@ -0,0 +1,295 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the MX53-EVK Freescale board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/mx53.h>
+
+ /* High Level Configuration Options */
+#define CONFIG_ARMV7 /* This is armv7 Cortex-A8 CPU core */
+#define CONFIG_MXC
+#define CONFIG_MX53
+#define CONFIG_MX53_EVK
+#define CONFIG_FLASH_HEADER
+#define CONFIG_FLASH_HEADER_OFFSET 0x400
+
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_ARCH_MMU
+
+#define CONFIG_MX53_HCLK_FREQ 24000000
+#define CONFIG_SYS_PLL2_FREQ 600
+#define CONFIG_SYS_AHB_PODF 4
+#define CONFIG_SYS_AXIA_PODF 1
+#define CONFIG_SYS_AXIB_PODF 2
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_SYS_64BIT_VSPRINTF
+
+#define BOARD_LATE_INIT
+/*
+ * Disabled for now due to build problems under Debian and a significant
+ * increase in the final file size: 144260 vs. 109536 Bytes.
+ */
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_REVISION_TAG 1
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE 128
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_MX53_UART 1
+#define CONFIG_MX53_UART1 1
+
+/*
+ * Android support Configs
+ */
+
+#define CONFIG_ANDROID_RECOVERY
+
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+
+
+#define CONFIG_ANDROID_RECOVERY_BOOTARGS_MMC \
+ "setenv bootargs ${bootargs} init=/init root=/dev/mmcblk0p7 rootfs=ext3"
+#define CONFIG_ANDROID_RECOVERY_BOOTCMD_MMC \
+ "run bootargs_base bootargs_android_recovery;mmc read 0 ${loadaddr} 0x800 0x1800;bootm"
+#define CONFIG_ANDROID_RECOVERY_CMD_FILE "/recovery/command"
+#define CONFIG_ANDROID_CACHE_PARTITION_MMC 6
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_NET_RETRY_COUNT 100
+#define CONFIG_NET_MULTI 1
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_DNS
+#define CONFIG_CMD_IIM
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_ENV
+
+#define CONFIG_CMD_CLOCK
+#define CONFIG_REF_CLK_FREQ CONFIG_MX53_HCLK_FREQ
+
+#define CONFIG_CMD_SATA
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_PRIME "FEC0"
+
+#define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */
+#define CONFIG_RD_LOADADDR (CONFIG_LOADADDR + 0x300000)
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "ethprime=FEC0\0" \
+ "uboot=u-boot.bin\0" \
+ "kernel=uImage\0" \
+ "loadaddr=0x70800000\0" \
+ "rd_loadaddr=0x70B00000\0" \
+ "nfsroot=/opt/eldk/arm\0" \
+ "bootargs_base=setenv bootargs console=ttymxc0,115200\0"\
+ "bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs "\
+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0"\
+ "bootargs_android=setenv bootargs ${bootargs} ip=dhcp mem=480M init=/init wvga calibration\0" \
+ "bootcmd=run bootcmd_android\0" \
+ "bootcmd_net=run bootargs_base bootargs_nfs; " \
+ "tftpboot ${loadaddr} ${kernel}; bootm\0" \
+ "bootcmd_android=run bootargs_base bootargs_android; " \
+ "mmcinit;cp.b 0x100000 ${loadaddr} 0x250000; " \
+ "cp.b 0x400000 ${rd_loadaddr} 0x4B000; " \
+ "bootm ${loadaddr} ${rd_loadaddr}\0" \
+
+
+#define CONFIG_ARP_TIMEOUT 200UL
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "MX53 EVK U-Boot > "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+
+#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x10000
+
+#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_CMDLINE_EDITING 1
+
+#define CONFIG_FEC0_IOBASE FEC_BASE_ADDR
+#define CONFIG_FEC0_PINMUX -1
+#define CONFIG_FEC0_PHY_ADDR -1
+#define CONFIG_FEC0_MIIBASE -1
+
+#define CONFIG_GET_FEC_MAC_ADDR_FROM_IIM
+#define CONFIG_IIM_MAC_ADDR_OFFSET 0x24
+
+#define CONFIG_MXC_FEC
+#define CONFIG_MII
+#define CONFIG_MII_GASKET
+#define CONFIG_DISCOVER_PHY
+
+/*
+ * FUSE Configs
+ * */
+#ifdef CONFIG_CMD_MMC
+ #define CONFIG_IMX_IIM
+ #define IMX_IIM_BASE IIM_BASE_ADDR
+ #define CONFIG_IIM_MAC_BANK 1
+ #define CONFIG_IIM_MAC_ROW 9
+#endif
+
+/*
+ * I2C Configs
+ */
+#define CONFIG_CMD_I2C 1
+#define CONFIG_HARD_I2C 1
+#define CONFIG_I2C_MXC 1
+#define CONFIG_SYS_I2C_PORT I2C2_BASE_ADDR
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SLAVE 0xfe
+
+
+/*
+ * SPI Configs
+ */
+#define CONFIG_FSL_SF 1
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH_IMX_ATMEL 1
+#define CONFIG_SPI_FLASH_CS 1
+#define CONFIG_IMX_ECSPI
+#define IMX_CSPI_VER_2_3 1
+#define MAX_SPI_BYTES (64 * 4)
+
+/*
+ * MMC Configs
+ */
+#ifdef CONFIG_CMD_MMC
+ #define CONFIG_MMC 1
+ #define CONFIG_GENERIC_MMC
+ #define CONFIG_IMX_MMC
+ #define CONFIG_SYS_FSL_ESDHC_NUM 2
+ #define CONFIG_SYS_FSL_ESDHC_ADDR 0
+ #define CONFIG_SYS_MMC_ENV_DEV 0
+ #define CONFIG_DOS_PARTITION 1
+ #define CONFIG_CMD_FAT 1
+ #define CONFIG_CMD_EXT2 1
+
+ /* detect whether ESDHC1 or ESDHC3 is boot device */
+ #define CONFIG_DYNAMIC_MMC_DEVNO
+
+ #define CONFIG_BOOT_PARTITION_ACCESS
+#endif
+
+/*
+ * SATA Configs
+ */
+#ifdef CONFIG_CMD_SATA
+ #define CONFIG_DWC_AHSATA
+ #define CONFIG_SYS_SATA_MAX_DEVICE 1
+ #define CONFIG_DWC_AHSATA_PORT_ID 0
+ #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR
+ #define CONFIG_LBA48
+ #define CONFIG_LIBATA
+#endif
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 CSD0_BASE_ADDR
+#define PHYS_SDRAM_1_SIZE (1024 * 1024 * 1024)
+#define iomem_valid_addr(addr, size) \
+ (addr >= PHYS_SDRAM_1 && addr <= \
+ (unsigned long)(PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE))
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_NO_FLASH
+
+/* Monitor at beginning of flash */
+#define CONFIG_FSL_ENV_IN_MMC
+
+#define CONFIG_ENV_SECT_SIZE (128 * 1024)
+#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
+
+#if defined(CONFIG_FSL_ENV_IN_NAND)
+ #define CONFIG_ENV_IS_IN_NAND 1
+ #define CONFIG_ENV_OFFSET 0x100000
+#elif defined(CONFIG_FSL_ENV_IN_MMC)
+ #define CONFIG_ENV_IS_IN_MMC 1
+ #define CONFIG_ENV_OFFSET (768 * 1024)
+#elif defined(CONFIG_FSL_ENV_IN_SF)
+ #define CONFIG_ENV_IS_IN_SPI_FLASH 1
+ #define CONFIG_ENV_SPI_CS 1
+ #define CONFIG_ENV_OFFSET (768 * 1024)
+#else
+ #define CONFIG_ENV_IS_NOWHERE 1
+#endif
+#endif /* __CONFIG_H */
generated by cgit v1.1 at 2024-11-15 23:42:45 +0000