diff options
113 files changed, 12041 insertions, 28 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 88cf1e9..38feac8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -487,6 +487,10 @@ Rowel Atienza <rowel@diwalabs.com> armadillo ARM720T +Dirk Behme <dirk.behme@gmail.com> + + omap3_beagle ARM CORTEX-A8 (OMAP3530 SoC) + Rishi Bhattacharya <rishi@ti.com> omap5912osk ARM926EJS @@ -527,6 +531,10 @@ Sascha Hauer <s.hauer@pengutronix.de> imx31_litekit i.MX31 imx31_phycore i.MX31 +Grazvydas Ignotas <notasas@gmail.com> + + omap3_pandora ARM CORTEX-A8 (OMAP3xx SoC) + Gary Jennejohn <gj@denx.de> smdk2400 ARM920T @@ -554,6 +562,10 @@ Guennadi Liakhovetski <g.liakhovetski@gmx.de> mx31ads i.MX31 SMDK6400 S3C6400 +Nishanth Menon <nm@ti.com> + + omap3_zoom1 ARM CORTEX-A8 (OMAP3xx SoC) + David Müller <d.mueller@elsoft.ch> smdk2410 ARM920T @@ -577,6 +589,10 @@ Dave Peverley <dpeverley@mpc-data.co.uk> omap730p2 ARM926EJS +Manikandan Pillai <mani.pillai@ti.com> + + omap3_evm ARM CORTEX-A8 (OMAP3xx SoC) + Stelian Pop <stelian.pop@leadtechdesign.com> at91cap9adk ARM926EJS (AT91CAP9 SoC) @@ -591,6 +607,15 @@ Stefan Roese <sr@denx.de> pdnb3 xscale scpu xscale +Alessandro Rubini <rubini@unipv.it> +Nomadik Linux Team <STN_WMM_nomadik_linux@list.st.com> + + nmdk8815 ARM926EJS (Nomadik 8815 Soc) + +Steve Sakoman <sakoman@gmail.com> + + omap3_overo ARM CORTEX-A8 (OMAP3xx SoC) + Robert Schwebel <r.schwebel@pengutronix.de> csb226 xscale @@ -502,6 +502,7 @@ LIST_ARM9=" \ mx1ads \ mx1fs2 \ netstar \ + nmdk8815 \ omap1510inn \ omap1610h2 \ omap1610inn \ @@ -545,6 +546,17 @@ LIST_ARM11=" \ " ######################################################################### +## ARM Cortex-A8 Systems +######################################################################### +LIST_ARM_CORTEX_A8=" \ + omap3_beagle \ + omap3_overo \ + omap3_evm \ + omap3_pandora \ + omap3_zoom1 \ +" + +######################################################################### ## AT91 Systems ######################################################################### @@ -598,15 +610,16 @@ LIST_ixp=" \ ## ARM groups ######################################################################### -LIST_arm=" \ - ${LIST_SA} \ - ${LIST_ARM7} \ - ${LIST_ARM9} \ - ${LIST_ARM10} \ - ${LIST_ARM11} \ - ${LIST_at91} \ - ${LIST_pxa} \ - ${LIST_ixp} \ +LIST_arm=" \ + ${LIST_SA} \ + ${LIST_ARM7} \ + ${LIST_ARM9} \ + ${LIST_ARM10} \ + ${LIST_ARM11} \ + ${LIST_ARM_CORTEX_A8} \ + ${LIST_at91} \ + ${LIST_pxa} \ + ${LIST_ixp} \ " ######################################################################### @@ -834,7 +847,7 @@ build_target() { for arg in $@ do case "$arg" in - arm|SA|ARM7|ARM9|ARM10|ARM11|at91|ixp|pxa \ + arm|SA|ARM7|ARM9|ARM10|ARM11|ARM_CORTEX_A8|at91|ixp|pxa \ |avr32 \ |blackfin \ |coldfire \ @@ -2716,7 +2716,7 @@ ap720t_config \ ap920t_config \ ap926ejs_config \ ap946es_config: unconfig - @board/integratorap/split_by_variant.sh $@ + @board/armltd/integratorap/split_by_variant.sh $@ integratorcp_config \ cp_config \ @@ -2728,7 +2728,7 @@ cp966_config \ cp922_config \ cp922_XA10_config \ cp1026_config: unconfig - @board/integratorcp/split_by_variant.sh $@ + @board/armltd/integratorcp/split_by_variant.sh $@ davinci_dvevm_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci @@ -2755,6 +2755,18 @@ mx1fs2_config : unconfig netstar_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm925t netstar +nmdk8815_config \ +nmdk8815_onenand_config: unconfig + @mkdir -p $(obj)include + @ > $(obj)include/config.h + @if [ "$(findstring _onenand, $@)" ] ; then \ + echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \ + $(XECHO) "... configured for OneNand Flash"; \ + else \ + $(XECHO) "... configured for Nand Flash"; \ + fi + @$(MKCONFIG) -a nmdk8815 arm arm926ejs nmdk8815 st nomadik + omap1510inn_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn @@ -2806,13 +2818,22 @@ scb9328_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx smdk2400_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 NULL s3c24x0 + @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0 smdk2410_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0 + @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0 -SX1_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm925t sx1 +SX1_stdout_serial_config \ +SX1_config: unconfig + @mkdir -p $(obj)include + @if [ "$(findstring _stdout_serial_, $@)" ] ; then \ + echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ + $(XECHO) "... configured for stdout serial"; \ + else \ + echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ + $(XECHO) "... configured for stdout usbtty"; \ + fi; + @$(MKCONFIG) SX1 arm arm925t sx1 # TRAB default configuration: 8 MB Flash, 32 MB RAM xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1)))) @@ -2858,7 +2879,7 @@ cm41xx_config : unconfig versatile_config \ versatileab_config \ versatilepb_config : unconfig - @board/versatile/split_by_variant.sh $@ + @board/armltd/versatile/split_by_variant.sh $@ voiceblue_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue @@ -2896,6 +2917,25 @@ SMN42_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292 ######################################################################### +## ARM CORTEX Systems +######################################################################### + +omap3_beagle_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle omap3 omap3 + +omap3_overo_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo omap3 omap3 + +omap3_evm_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm omap3 omap3 + +omap3_pandora_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora omap3 omap3 + +omap3_zoom1_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 omap3 omap3 + +######################################################################### ## XScale Systems ######################################################################### diff --git a/board/armltd/.gitignore b/board/armltd/.gitignore new file mode 100644 index 0000000..a3df156 --- /dev/null +++ b/board/armltd/.gitignore @@ -0,0 +1,2 @@ +/integratorap/u-boot.lds +/integratorcp/u-boot.lds diff --git a/board/integratorap/Makefile b/board/armltd/integratorap/Makefile index 79f501a..79f501a 100644 --- a/board/integratorap/Makefile +++ b/board/armltd/integratorap/Makefile diff --git a/board/integratorap/config.mk b/board/armltd/integratorap/config.mk index e4c5c3b..e4c5c3b 100644 --- a/board/integratorap/config.mk +++ b/board/armltd/integratorap/config.mk diff --git a/board/integratorap/flash.c b/board/armltd/integratorap/flash.c index 0492be7..0492be7 100644 --- a/board/integratorap/flash.c +++ b/board/armltd/integratorap/flash.c diff --git a/board/integratorap/integratorap.c b/board/armltd/integratorap/integratorap.c index ddacabb..ddacabb 100644 --- a/board/integratorap/integratorap.c +++ b/board/armltd/integratorap/integratorap.c diff --git a/board/integratorap/lowlevel_init.S b/board/armltd/integratorap/lowlevel_init.S index ab9589c..ab9589c 100644 --- a/board/integratorap/lowlevel_init.S +++ b/board/armltd/integratorap/lowlevel_init.S diff --git a/board/integratorap/split_by_variant.sh b/board/armltd/integratorap/split_by_variant.sh index 8c54250..51dc53f 100755 --- a/board/integratorap/split_by_variant.sh +++ b/board/armltd/integratorap/split_by_variant.sh @@ -105,15 +105,15 @@ then fi mkdir -p ${obj}include -mkdir -p ${obj}board/integratorap +mkdir -p ${obj}board/armltd/integratorap mv tmp.fil ${obj}include/config.h # --------------------------------------------------------- # Ensure correct core object loaded first in U-Boot image # --------------------------------------------------------- -sed -r 's/CPU_FILE/cpu\/'$cpu'\/start.o/; s/#.*//' ${src}board/integratorap/u-boot.lds.template > ${obj}board/integratorap/u-boot.lds +sed -r 's/CPU_FILE/cpu\/'$cpu'\/start.o/; s/#.*//' ${src}board/armltd/integratorap/u-boot.lds.template > ${obj}board/armltd/integratorap/u-boot.lds # --------------------------------------------------------- # Complete the configuration # --------------------------------------------------------- -$MKCONFIG -a integratorap arm $cpu integratorap; +$MKCONFIG -a integratorap arm $cpu integratorap armltd; echo "Variant:: $variant with core $cpu" diff --git a/board/integratorap/u-boot.lds.template b/board/armltd/integratorap/u-boot.lds.template index 0ec8087..0ec8087 100644 --- a/board/integratorap/u-boot.lds.template +++ b/board/armltd/integratorap/u-boot.lds.template diff --git a/board/integratorcp/Makefile b/board/armltd/integratorcp/Makefile index 92a1a07..92a1a07 100644 --- a/board/integratorcp/Makefile +++ b/board/armltd/integratorcp/Makefile diff --git a/board/integratorcp/config.mk b/board/armltd/integratorcp/config.mk index e4c5c3b..e4c5c3b 100644 --- a/board/integratorcp/config.mk +++ b/board/armltd/integratorcp/config.mk diff --git a/board/integratorcp/flash.c b/board/armltd/integratorcp/flash.c index 5059dae..5059dae 100644 --- a/board/integratorcp/flash.c +++ b/board/armltd/integratorcp/flash.c diff --git a/board/integratorcp/integratorcp.c b/board/armltd/integratorcp/integratorcp.c index 72629ce..72629ce 100644 --- a/board/integratorcp/integratorcp.c +++ b/board/armltd/integratorcp/integratorcp.c diff --git a/board/integratorcp/lowlevel_init.S b/board/armltd/integratorcp/lowlevel_init.S index 18f7d2e..18f7d2e 100644 --- a/board/integratorcp/lowlevel_init.S +++ b/board/armltd/integratorcp/lowlevel_init.S diff --git a/board/integratorcp/split_by_variant.sh b/board/armltd/integratorcp/split_by_variant.sh index 3f0a447..34422fd 100755 --- a/board/integratorcp/split_by_variant.sh +++ b/board/armltd/integratorcp/split_by_variant.sh @@ -100,15 +100,15 @@ then fi mkdir -p ${obj}include -mkdir -p ${obj}board/integratorcp +mkdir -p ${obj}board/armltd/integratorcp mv tmp.fil ${obj}include/config.h # --------------------------------------------------------- # Ensure correct core object loaded first in U-Boot image # --------------------------------------------------------- -sed -r 's/CPU_FILE/cpu\/'$cpu'\/start.o/; s/#.*//' ${src}board/integratorcp/u-boot.lds.template > ${obj}board/integratorcp/u-boot.lds +sed -r 's/CPU_FILE/cpu\/'$cpu'\/start.o/; s/#.*//' ${src}board/armltd/integratorcp/u-boot.lds.template > ${obj}board/armltd/integratorcp/u-boot.lds # --------------------------------------------------------- # Complete the configuration # --------------------------------------------------------- -$MKCONFIG -a integratorcp arm $cpu integratorcp; +$MKCONFIG -a integratorcp arm $cpu integratorcp armltd; echo "Variant:: $variant with core $cpu" diff --git a/board/integratorcp/u-boot.lds.template b/board/armltd/integratorcp/u-boot.lds.template index 0ec8087..0ec8087 100644 --- a/board/integratorcp/u-boot.lds.template +++ b/board/armltd/integratorcp/u-boot.lds.template diff --git a/board/versatile/Makefile b/board/armltd/versatile/Makefile index 044a429..044a429 100644 --- a/board/versatile/Makefile +++ b/board/armltd/versatile/Makefile diff --git a/board/versatile/config.mk b/board/armltd/versatile/config.mk index 25b79b3..25b79b3 100644 --- a/board/versatile/config.mk +++ b/board/armltd/versatile/config.mk diff --git a/board/versatile/flash.c b/board/armltd/versatile/flash.c index 3bdc895..3bdc895 100644 --- a/board/versatile/flash.c +++ b/board/armltd/versatile/flash.c diff --git a/board/versatile/lowlevel_init.S b/board/armltd/versatile/lowlevel_init.S index bdfce2d..bdfce2d 100644 --- a/board/versatile/lowlevel_init.S +++ b/board/armltd/versatile/lowlevel_init.S diff --git a/board/versatile/split_by_variant.sh b/board/armltd/versatile/split_by_variant.sh index ccded7e..475e5a3 100755 --- a/board/versatile/split_by_variant.sh +++ b/board/armltd/versatile/split_by_variant.sh @@ -38,5 +38,5 @@ fi # --------------------------------------------------------- # Complete the configuration # --------------------------------------------------------- -$MKCONFIG -a versatile arm arm926ejs versatile NULL versatile +$MKCONFIG -a versatile arm arm926ejs versatile armltd versatile echo "Variant:: $variant" diff --git a/board/versatile/u-boot.lds b/board/armltd/versatile/u-boot.lds index 6e6e29b..6e6e29b 100644 --- a/board/versatile/u-boot.lds +++ b/board/armltd/versatile/u-boot.lds diff --git a/board/versatile/versatile.c b/board/armltd/versatile/versatile.c index 0f35caa..0f35caa 100644 --- a/board/versatile/versatile.c +++ b/board/armltd/versatile/versatile.c diff --git a/board/omap3/beagle/Makefile b/board/omap3/beagle/Makefile new file mode 100644 index 0000000..f797112 --- /dev/null +++ b/board/omap3/beagle/Makefile @@ -0,0 +1,49 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := beagle.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/omap3/beagle/beagle.c b/board/omap3/beagle/beagle.c new file mode 100644 index 0000000..ecdea09 --- /dev/null +++ b/board/omap3/beagle/beagle.c @@ -0,0 +1,90 @@ +/* + * (C) Copyright 2004-2008 + * Texas Instruments, <www.ti.com> + * + * Author : + * Sunil Kumar <sunilsaini05@gmail.com> + * Shashi Ranjan <shashiranjanmca05@gmail.com> + * + * Derived from Beagle Board and 3430 SDP code by + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-types.h> +#include "beagle.h" + +/****************************************************************************** + * Routine: board_init + * Description: Early hardware init. + *****************************************************************************/ +int board_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ + /* board id for Linux */ + gd->bd->bi_arch_number = MACH_TYPE_OMAP3_BEAGLE; + /* boot param addr */ + gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); + + return 0; +} + +/****************************************************************************** + * Routine: misc_init_r + * Description: Configure board specific parts + *****************************************************************************/ +int misc_init_r(void) +{ + gpio_t *gpio5_base = (gpio_t *)OMAP34XX_GPIO5_BASE; + gpio_t *gpio6_base = (gpio_t *)OMAP34XX_GPIO6_BASE; + + power_init_r(); + + /* Configure GPIOs to output */ + writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe); + writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 | + GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe); + + /* Set GPIOs */ + writel(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1, + &gpio6_base->setdataout); + writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 | + GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout); + + return 0; +} + +/****************************************************************************** + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers specific to the + * hardware. Many pins need to be moved from protect to primary + * mode. + *****************************************************************************/ +void set_muxconf_regs(void) +{ + MUX_BEAGLE(); +} diff --git a/board/omap3/beagle/beagle.h b/board/omap3/beagle/beagle.h new file mode 100644 index 0000000..6511ffa --- /dev/null +++ b/board/omap3/beagle/beagle.h @@ -0,0 +1,376 @@ +/* + * (C) Copyright 2008 + * Dirk Behme <dirk.behme@gmail.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _BEAGLE_H_ +#define _BEAGLE_H_ + +const omap3_sysinfo sysinfo = { + SDP_3430_V1, + SDP_3430_V2, + DDR_STACKED, + "3530", + "OMAP3 Beagle board", +#if defined(CONFIG_ENV_IS_IN_ONENAND) + "OneNAND", +#else + "NAND", +#endif +}; + +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_BEAGLE() \ + /*SDRC*/\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ + /*GPMC*/\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ + MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ + MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ + MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ + MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\ + MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5*/\ + MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M1)) /*SYS_nDMA_REQ2*/\ + MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M1)) /*SYS_nDMA_REQ3*/\ + MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /*GPMC_nBE1*/\ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*GPMC_WAIT2*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPMC_WAIT3*/\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ + MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ + MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ + /*DSS*/\ + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\ + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\ + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\ + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\ + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\ + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\ + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\ + MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\ + MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\ + MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\ + MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\ + MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\ + MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\ + MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\ + MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\ + MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\ + MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\ + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\ + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\ + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\ + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\ + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\ + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\ + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\ + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\ + /*CAMERA*/\ + MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) /*CAM_HS */\ + MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) /*CAM_VS */\ + MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\ + MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) /*CAM_PCLK*/\ + MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\ + MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) /*CAM_D0*/\ + MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) /*CAM_D1*/\ + MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) /*CAM_D2*/\ + MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) /*CAM_D3*/\ + MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) /*CAM_D4*/\ + MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) /*CAM_D5*/\ + MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) /*CAM_D6*/\ + MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) /*CAM_D7*/\ + MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) /*CAM_D8*/\ + MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) /*CAM_D9*/\ + MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) /*CAM_D10*/\ + MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) /*CAM_D11*/\ + MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\ + MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\ + MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\ + MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) /*CSI2_DX1*/\ + MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) /*CSI2_DY1*/\ + /*Audio Interface */\ + MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\ + MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) /*McBSP2_CLKX*/\ + MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) /*McBSP2_DR*/\ + MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\ + /*Expansion card */\ + MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\ + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\ + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\ + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\ + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\ + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\ + MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /*MMC1_DAT4*/\ + MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /*MMC1_DAT5*/\ + MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\ + MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\ + /*Wireless LAN */\ + MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\ + MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M4)) /*GPIO_131*/\ + MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M4)) /*GPIO_132*/\ + MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M4)) /*GPIO_133*/\ + MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M4)) /*GPIO_134*/\ + MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M4)) /*GPIO_135*/\ + MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M4)) /*GPIO_136*/\ + MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137*/\ + MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M4)) /*GPIO_138*/\ + MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\ + /*Bluetooth*/\ + MUX_VAL(CP(MCBSP3_DX), (IDIS | PTD | DIS | M4)) /*GPIO_140*/\ + MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M4)) /*GPIO_142*/\ + MUX_VAL(CP(MCBSP3_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_141*/\ + MUX_VAL(CP(MCBSP3_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_143*/\ + MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) /*UART2_CTS*/\ + MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) /*UART2_RTS*/\ + MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /*UART2_TX*/\ + MUX_VAL(CP(UART2_RX), (IDIS | PTD | DIS | M4)) /*GPIO_147*/\ + /*Modem Interface */\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_149*/ \ + MUX_VAL(CP(UART1_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_150*/ \ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ + MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M1)) /*SSI1_DAT_RX*/\ + MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M1)) /*SSI1_FLAG_RX*/\ + MUX_VAL(CP(MCBSP4_DX), (IEN | PTD | DIS | M1)) /*SSI1_RDY_RX*/\ + MUX_VAL(CP(MCBSP4_FSX), (IEN | PTD | DIS | M1)) /*SSI1_WAKE*/\ + MUX_VAL(CP(MCBSP1_CLKR), (IDIS | PTD | DIS | M4)) /*GPIO_156*/\ + MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M4)) /*GPIO_157*/\ + MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M4)) /*GPIO_158*/\ + MUX_VAL(CP(MCBSP1_DR), (IDIS | PTD | DIS | M4)) /*GPIO_159*/\ + MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*McBSP_CLKS*/\ + MUX_VAL(CP(MCBSP1_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_161*/\ + MUX_VAL(CP(MCBSP1_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_162*/\ + /*Serial Interface*/\ + MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_RCTX*/\ + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*UART3_RTS_SD */\ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ + MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\ + MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\ + MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /*HSUSB0_DIR*/\ + MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /*HSUSB0_NXT*/\ + MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA0*/\ + MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA1*/\ + MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA2*/\ + MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA3*/\ + MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA4*/\ + MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA5*/\ + MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA6*/\ + MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA7*/\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\ + MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M4)) /*GPIO_168*/\ + MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M4)) /*GPIO_183*/\ + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\ + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\ + MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\ + MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\ + MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*GPIO_170*/\ + MUX_VAL(CP(MCSPI1_CLK), (IEN | PTU | EN | M4)) /*GPIO_171*/\ + MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTU | EN | M4)) /*GPIO_172*/\ + MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) /*McSPI1_SOMI*/\ + MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) /*McSPI1_CS0*/\ + MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | EN | M0)) /*McSPI1_CS1*/\ + MUX_VAL(CP(MCSPI1_CS2), (IDIS | PTD | DIS | M4)) /*GPIO_176*/\ + /* USB EHCI (port 2) */\ + MUX_VAL(CP(MCSPI1_CS3), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA2*/\ + MUX_VAL(CP(MCSPI2_CLK), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA7*/\ + MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA4*/\ + MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA5*/\ + MUX_VAL(CP(MCSPI2_CS0), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA6*/\ + MUX_VAL(CP(MCSPI2_CS1), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA3*/\ + MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB2_CLK*/\ + MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB2_STP*/\ + MUX_VAL(CP(ETK_D12_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DIR*/\ + MUX_VAL(CP(ETK_D13_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_NXT*/\ + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA0*/\ + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA1*/\ + /*Control and debug */\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ + MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\ + MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3*/\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 - MMC1_WP*/\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\ + MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/ \ + MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\ + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT1*/\ + MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\ + MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_STP*/\ + MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB1_CLK*/\ + MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA0*/\ + MUX_VAL(CP(ETK_D1_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA1*/\ + MUX_VAL(CP(ETK_D2_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA2*/\ + MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA7*/\ + MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA4*/\ + MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA5*/\ + MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA6*/\ + MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA3*/\ + MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DIR*/\ + MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_NXT*/\ + MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)) /*d2d_mcad1*/\ + MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)) /*d2d_mcad2*/\ + MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)) /*d2d_mcad3*/\ + MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)) /*d2d_mcad4*/\ + MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)) /*d2d_mcad5*/\ + MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)) /*d2d_mcad6*/\ + MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)) /*d2d_mcad7*/\ + MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)) /*d2d_mcad8*/\ + MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)) /*d2d_mcad9*/\ + MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)) /*d2d_mcad10*/\ + MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)) /*d2d_mcad11*/\ + MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)) /*d2d_mcad12*/\ + MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)) /*d2d_mcad13*/\ + MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)) /*d2d_mcad14*/\ + MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)) /*d2d_mcad15*/\ + MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)) /*d2d_mcad16*/\ + MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)) /*d2d_mcad17*/\ + MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)) /*d2d_mcad18*/\ + MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)) /*d2d_mcad19*/\ + MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)) /*d2d_mcad20*/\ + MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)) /*d2d_mcad21*/\ + MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)) /*d2d_mcad22*/\ + MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)) /*d2d_mcad23*/\ + MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)) /*d2d_mcad24*/\ + MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)) /*d2d_mcad25*/\ + MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)) /*d2d_mcad26*/\ + MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)) /*d2d_mcad27*/\ + MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)) /*d2d_mcad28*/\ + MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)) /*d2d_mcad29*/\ + MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)) /*d2d_mcad30*/\ + MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)) /*d2d_mcad31*/\ + MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)) /*d2d_mcad32*/\ + MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)) /*d2d_mcad33*/\ + MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) /*d2d_mcad34*/\ + MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) /*d2d_mcad35*/\ + MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) /*d2d_mcad36*/\ + MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) /*d2d_clk26mi*/\ + MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) /*d2d_nrespwron*/\ + MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) /*d2d_nreswarm */\ + MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) /*d2d_arm9nirq */\ + MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) /*d2d_uma2p6fiq*/\ + MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) /*d2d_spint*/\ + MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) /*d2d_frint*/\ + MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) /*d2d_dmareq0*/\ + MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) /*d2d_dmareq1*/\ + MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) /*d2d_dmareq2*/\ + MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) /*d2d_dmareq3*/\ + MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) /*d2d_n3gtrst*/\ + MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) /*d2d_n3gtdi*/\ + MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) /*d2d_n3gtdo*/\ + MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) /*d2d_n3gtms*/\ + MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) /*d2d_n3gtck*/\ + MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) /*d2d_n3grtck*/\ + MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) /*d2d_mstdby*/\ + MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) /*d2d_swakeup*/\ + MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) /*d2d_idlereq*/\ + MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) /*d2d_idleack*/\ + MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) /*d2d_mwrite*/\ + MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) /*d2d_swrite*/\ + MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) /*d2d_mread*/\ + MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) /*d2d_sread*/\ + MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_mbusflag*/\ + MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_sbusflag*/\ + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1*/ +#endif diff --git a/board/omap3/beagle/config.mk b/board/omap3/beagle/config.mk new file mode 100644 index 0000000..879b2e2 --- /dev/null +++ b/board/omap3/beagle/config.mk @@ -0,0 +1,33 @@ +# +# (C) Copyright 2006 +# Texas Instruments, <www.ti.com> +# +# Beagle Board uses OMAP3 (ARM-CortexA8) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Physical Address: +# 8000'0000 (bank0) +# A000/0000 (bank1) +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +TEXT_BASE = 0x80e80000 diff --git a/board/omap3/beagle/u-boot.lds b/board/omap3/beagle/u-boot.lds new file mode 100644 index 0000000..69d8ac9 --- /dev/null +++ b/board/omap3/beagle/u-boot.lds @@ -0,0 +1,63 @@ +/* + * January 2004 - Changed to support H4 device + * Copyright (c) 2004 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm_cortexa8/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } + __exidx_start = .; + .ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } + __exidx_end = .; + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/board/omap3/common/Makefile b/board/omap3/common/Makefile new file mode 100644 index 0000000..7b892fa --- /dev/null +++ b/board/omap3/common/Makefile @@ -0,0 +1,53 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)board/$(VENDOR)/common) +endif + +LIB = $(obj)lib$(VENDOR).a + +COBJS-$(CONFIG_OMAP3_BEAGLE) += power.o +COBJS-$(CONFIG_OMAP3_OVERO) += power.o +COBJS-$(CONFIG_OMAP3_PANDORA) += power.o +COBJS-$(CONFIG_OMAP3_ZOOM1) += power.o + +COBJS := $(COBJS-y) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/omap3/common/power.c b/board/omap3/common/power.c new file mode 100644 index 0000000..4908e5b --- /dev/null +++ b/board/omap3/common/power.c @@ -0,0 +1,74 @@ +/* + * (C) Copyright 2004-2008 + * Texas Instruments, <www.ti.com> + * + * Author : + * Sunil Kumar <sunilsaini05@gmail.com> + * Shashi Ranjan <shashiranjanmca05@gmail.com> + * + * Derived from Beagle Board and 3430 SDP code by + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <i2c.h> + +/****************************************************************************** + * Routine: power_init_r + * Description: Configure power supply + *****************************************************************************/ +void power_init_r(void) +{ + unsigned char byte; + +#ifdef CONFIG_DRIVER_OMAP34XX_I2C + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +#endif + + /* + * Configure OMAP3 supply voltages in power management + * companion chip. + */ + + /* set VAUX3 to 2.8V */ + byte = DEV_GRP_P1; + i2c_write(PWRMGT_ADDR_ID4, VAUX3_DEV_GRP, 1, &byte, 1); + byte = VAUX3_VSEL_28; + i2c_write(PWRMGT_ADDR_ID4, VAUX3_DEDICATED, 1, &byte, 1); + + /* set VPLL2 to 1.8V */ + byte = DEV_GRP_ALL; + i2c_write(PWRMGT_ADDR_ID4, VPLL2_DEV_GRP, 1, &byte, 1); + byte = VPLL2_VSEL_18; + i2c_write(PWRMGT_ADDR_ID4, VPLL2_DEDICATED, 1, &byte, 1); + + /* set VDAC to 1.8V */ + byte = DEV_GRP_P1; + i2c_write(PWRMGT_ADDR_ID4, VDAC_DEV_GRP, 1, &byte, 1); + byte = VDAC_VSEL_18; + i2c_write(PWRMGT_ADDR_ID4, VDAC_DEDICATED, 1, &byte, 1); + + /* enable LED */ + byte = LEDBPWM | LEDAPWM | LEDBON | LEDAON; + i2c_write(PWRMGT_ADDR_ID3, LEDEN, 1, &byte, 1); +} diff --git a/board/omap3/evm/Makefile b/board/omap3/evm/Makefile new file mode 100644 index 0000000..a83ccdc --- /dev/null +++ b/board/omap3/evm/Makefile @@ -0,0 +1,48 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := evm.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + diff --git a/board/omap3/evm/config.mk b/board/omap3/evm/config.mk new file mode 100644 index 0000000..4d873eb --- /dev/null +++ b/board/omap3/evm/config.mk @@ -0,0 +1,33 @@ +# +# (C) Copyright 2006 - 2008 +# Texas Instruments, <www.ti.com> +# +# EVM uses OMAP3 (ARM-CortexA8) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Physical Address: +# 8000'0000 (bank0) +# A000/0000 (bank1) +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +TEXT_BASE = 0x80e80000 diff --git a/board/omap3/evm/evm.c b/board/omap3/evm/evm.c new file mode 100644 index 0000000..b406312 --- /dev/null +++ b/board/omap3/evm/evm.c @@ -0,0 +1,122 @@ +/* + * (C) Copyright 2004-2008 + * Texas Instruments, <www.ti.com> + * + * Author : + * Manikandan Pillai <mani.pillai@ti.com> + * + * Derived from Beagle Board and 3430 SDP code by + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mem.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <i2c.h> +#include <asm/mach-types.h> +#include "evm.h" + +/****************************************************************************** + * Routine: board_init + * Description: Early hardware init. + *****************************************************************************/ +int board_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ + /* board id for Linux */ + gd->bd->bi_arch_number = MACH_TYPE_OMAP3EVM; + /* boot param addr */ + gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); + + return 0; +} + +/****************************************************************************** + * Routine: misc_init_r + * Description: Init ethernet (done here so udelay works) + *****************************************************************************/ +int misc_init_r(void) +{ + +#ifdef CONFIG_DRIVER_OMAP34XX_I2C + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +#endif + +#if defined(CONFIG_CMD_NET) + setup_net_chip(); +#endif + + return 0; +} + +/****************************************************************************** + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers specific to the + * hardware. Many pins need to be moved from protect to primary + * mode. + *****************************************************************************/ +void set_muxconf_regs(void) +{ + MUX_EVM(); +} + +/****************************************************************************** + * Routine: setup_net_chip + * Description: Setting up the configuration GPMC registers specific to the + * Ethernet hardware. + *****************************************************************************/ +static void setup_net_chip(void) +{ + gpio_t *gpio3_base = (gpio_t *)OMAP34XX_GPIO3_BASE; + gpmc_csx_t *gpmc_cs6_base = (gpmc_csx_t *)GPMC_CONFIG_CS6_BASE; + ctrl_t *ctrl_base = (ctrl_t *)OMAP34XX_CTRL_BASE; + + /* Configure GPMC registers */ + writel(NET_GPMC_CONFIG1, &gpmc_cs6_base->config1); + writel(NET_GPMC_CONFIG2, &gpmc_cs6_base->config2); + writel(NET_GPMC_CONFIG3, &gpmc_cs6_base->config3); + writel(NET_GPMC_CONFIG4, &gpmc_cs6_base->config4); + writel(NET_GPMC_CONFIG5, &gpmc_cs6_base->config5); + writel(NET_GPMC_CONFIG6, &gpmc_cs6_base->config6); + writel(NET_GPMC_CONFIG7, &gpmc_cs6_base->config7); + + /* Enable off mode for NWE in PADCONF_GPMC_NWE register */ + writew(readw(&ctrl_base ->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe); + /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */ + writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe); + /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */ + writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00, + &ctrl_base->gpmc_nadv_ale); + + /* Make GPIO 64 as output pin */ + writel(readl(&gpio3_base->oe) & ~(GPIO0), &gpio3_base->oe); + + /* Now send a pulse on the GPIO pin */ + writel(GPIO0, &gpio3_base->setdataout); + udelay(1); + writel(GPIO0, &gpio3_base->cleardataout); + udelay(1); + writel(GPIO0, &gpio3_base->setdataout); +} diff --git a/board/omap3/evm/evm.h b/board/omap3/evm/evm.h new file mode 100644 index 0000000..4ecea7f --- /dev/null +++ b/board/omap3/evm/evm.h @@ -0,0 +1,396 @@ +/* + * (C) Copyright 2008 + * Nishanth Menon <menon.nishanth@gmail.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _EVM_H_ +#define _EVM_H_ + +const omap3_sysinfo sysinfo = { + OMAP3EVM_V1, + OMAP3EVM_V2, + DDR_DISCRETE, + "35X-Family", + "OMAP3 EVM board", +#if defined(CONFIG_ENV_IS_IN_ONENAND) + "OneNAND", +#else + "NAND", +#endif +}; + +static void setup_net_chip(void); + +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_EVM() \ + /*SDRC*/\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ + /*GPMC*/\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) /*GPMC_A8*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) /*GPMC_A9*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) /*GPMC_A10*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ + MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ + MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ + MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ + MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)) /*GPMC_nCS4*/\ + MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M0)) /*GPMC_nCS5*/\ + MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M0)) /*GPMC_nCS6*/\ + MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M0)) /*GPMC_nCS7*/\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTU | EN | M0)) /*GPMC_CLK*/\ + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ + MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) /*GPMC_nBE0_CLE*/\ + MUX_VAL(CP(GPMC_NBE1), (IEN | PTU | EN | M0)) /*GPMC_nBE1*/\ + MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) /*GPIO_64*/\ + /* - ETH_nRESET*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPMC_WAIT3*/\ + /*DSS*/\ + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\ + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\ + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\ + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\ + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\ + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\ + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\ + MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\ + MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\ + MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\ + MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\ + MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\ + MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\ + MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\ + MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\ + MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\ + MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\ + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\ + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\ + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\ + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\ + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\ + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\ + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\ + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\ + /*CAMERA*/\ + MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) /*CAM_HS */\ + MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) /*CAM_VS */\ + MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\ + MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) /*CAM_PCLK*/\ + MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\ + /* - CAM_RESET*/\ + MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) /*CAM_D0*/\ + MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) /*CAM_D1*/\ + MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) /*CAM_D2*/\ + MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) /*CAM_D3*/\ + MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) /*CAM_D4*/\ + MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) /*CAM_D5*/\ + MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) /*CAM_D6*/\ + MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) /*CAM_D7*/\ + MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) /*CAM_D8*/\ + MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) /*CAM_D9*/\ + MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) /*CAM_D10*/\ + MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) /*CAM_D11*/\ + MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\ + MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\ + MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\ + MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) /*CSI2_DX1*/\ + MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) /*CSI2_DY1*/\ + /*Audio Interface */\ + MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\ + MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) /*McBSP2_CLKX*/\ + MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) /*McBSP2_DR*/\ + MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\ + /*Expansion card */\ + MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\ + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\ + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\ + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\ + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\ + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\ + MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /*MMC1_DAT4*/\ + MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /*MMC1_DAT5*/\ + MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\ + MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\ + /*Wireless LAN */\ + MUX_VAL(CP(MMC2_CLK), (IEN | PTD | DIS | M0)) /*MMC2_CLK*/\ + MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\ + MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\ + MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\ + MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)) /*MMC2_DAT2*/\ + MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)) /*MMC2_DAT3*/\ + MUX_VAL(CP(MMC2_DAT4), (IDIS | PTD | DIS | M0)) /*MMC2_DAT4*/\ + MUX_VAL(CP(MMC2_DAT5), (IDIS | PTD | DIS | M0)) /*MMC2_DAT5*/\ + MUX_VAL(CP(MMC2_DAT6), (IDIS | PTD | DIS | M0)) /*MMC2_DAT6 */\ + MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M0)) /*MMC2_DAT7*/\ + /*Bluetooth*/\ + MUX_VAL(CP(MCBSP3_DX), (IDIS | PTD | DIS | M0)) /*McBSP3_DX*/\ + MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M0)) /*McBSP3_DR*/\ + MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M0)) /*McBSP3_CLKX */\ + MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M0)) /*McBSP3_FSX*/\ + MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) /*UART2_CTS*/\ + MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) /*UART2_RTS*/\ + MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /*UART2_TX*/\ + MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M0)) /*UART2_RX*/\ + /*Modem Interface */\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) /*UART1_RTS*/\ + MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) /*UART1_CTS*/\ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ + MUX_VAL(CP(MCBSP4_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_152*/\ + /* - LCD_INI*/\ + MUX_VAL(CP(MCBSP4_DR), (IDIS | PTD | DIS | M4)) /*GPIO_153*/\ + /* - LCD_ENVDD */\ + MUX_VAL(CP(MCBSP4_DX), (IDIS | PTD | DIS | M4)) /*GPIO_154*/\ + /* - LCD_QVGA/nVGA */\ + MUX_VAL(CP(MCBSP4_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_155*/\ + /* - LCD_RESB */\ + MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0)) /*MCBSP1_CLKR */\ + MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M0)) /*MCBSP1_FSR*/\ + MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M0)) /*MCBSP1_DX*/\ + MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M0)) /*MCBSP1_DR*/\ + MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*MCBSP_CLKS */\ + MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0)) /*MCBSP1_FSX*/\ + MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0)) /*MCBSP1_CLKX */\ + /*Serial Interface*/\ + MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_*/\ + /* RCTX*/\ + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*UART3_RTS_SD */\ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ + MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\ + MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\ + MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /*HSUSB0_DIR*/\ + MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /*HSUSB0_NXT*/\ + MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA0*/\ + MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA1*/\ + MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA2*/\ + MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA3*/\ + MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA4*/\ + MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA5*/\ + MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA6*/\ + MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA7*/\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\ + MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) /*I2C2_SCL*/\ + MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) /*I2C2_SDA*/\ + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\ + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\ + MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\ + MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\ + MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M0)) /*HDQ_SIO*/\ + MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) /*McSPI1_CLK*/\ + MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) /*McSPI1_SIMO */\ + MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) /*McSPI1_SOMI */\ + MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) /*McSPI1_CS0*/\ + MUX_VAL(CP(MCSPI1_CS1), (IEN | PTD | EN | M4)) /*GPIO_175*/\ + /* TS_PEN_IRQ */\ + MUX_VAL(CP(MCSPI1_CS2), (IEN | PTU | DIS | M4)) /*GPIO_176*/\ + /* - LAN_INTR*/\ + MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M0)) /*McSPI1_CS3*/\ + MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)) /*McSPI2_CLK*/\ + MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)) /*McSPI2_SIMO*/\ + MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)) /*McSPI2_SOMI*/\ + MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M0)) /*McSPI2_CS0*/\ + MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M0)) /*McSPI2_CS1*/\ + /*Control and debug */\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ + MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\ + MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\ + /* - PEN_IRQ */\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4*/\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\ + MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/\ + /* - VIO_1V8*/\ + MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\ + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT1*/\ + MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)) /*SYS_CLKOUT2*/\ + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\ + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\ + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\ + MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) /*JTAG_EMU0*/\ + MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) /*JTAG_EMU1*/\ + MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M0)) /*ETK_CLK*/\ + MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M0)) /*ETK_CTL*/\ + MUX_VAL(CP(ETK_D0_ES2 ), (IEN | PTD | DIS | M0)) /*ETK_D0*/\ + MUX_VAL(CP(ETK_D1_ES2 ), (IEN | PTD | DIS | M0)) /*ETK_D1*/\ + MUX_VAL(CP(ETK_D2_ES2 ), (IEN | PTD | EN | M0)) /*ETK_D2*/\ + MUX_VAL(CP(ETK_D3_ES2 ), (IEN | PTD | DIS | M0)) /*ETK_D3*/\ + MUX_VAL(CP(ETK_D4_ES2 ), (IEN | PTD | DIS | M0)) /*ETK_D4*/\ + MUX_VAL(CP(ETK_D5_ES2 ), (IEN | PTD | DIS | M0)) /*ETK_D5*/\ + MUX_VAL(CP(ETK_D6_ES2 ), (IEN | PTD | DIS | M0)) /*ETK_D6*/\ + MUX_VAL(CP(ETK_D7_ES2 ), (IEN | PTD | DIS | M0)) /*ETK_D7*/\ + MUX_VAL(CP(ETK_D8_ES2 ), (IEN | PTD | DIS | M0)) /*ETK_D8*/\ + MUX_VAL(CP(ETK_D9_ES2 ), (IEN | PTD | DIS | M0)) /*ETK_D9*/\ + MUX_VAL(CP(ETK_D10_ES2), (IEN | PTD | DIS | M0)) /*ETK_D10*/\ + MUX_VAL(CP(ETK_D11_ES2), (IEN | PTD | DIS | M0)) /*ETK_D11*/\ + MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M0)) /*ETK_D12*/\ + MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M0)) /*ETK_D13*/\ + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M0)) /*ETK_D14*/\ + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M0)) /*ETK_D15*/\ + /*Die to Die */\ + MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)) /*d2d_mcad1*/\ + MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)) /*d2d_mcad2*/\ + MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)) /*d2d_mcad3*/\ + MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)) /*d2d_mcad4*/\ + MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)) /*d2d_mcad5*/\ + MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)) /*d2d_mcad6*/\ + MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)) /*d2d_mcad7*/\ + MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)) /*d2d_mcad8*/\ + MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)) /*d2d_mcad9*/\ + MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)) /*d2d_mcad10*/\ + MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)) /*d2d_mcad11*/\ + MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)) /*d2d_mcad12*/\ + MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)) /*d2d_mcad13*/\ + MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)) /*d2d_mcad14*/\ + MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)) /*d2d_mcad15*/\ + MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)) /*d2d_mcad16*/\ + MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)) /*d2d_mcad17*/\ + MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)) /*d2d_mcad18*/\ + MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)) /*d2d_mcad19*/\ + MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)) /*d2d_mcad20*/\ + MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)) /*d2d_mcad21*/\ + MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)) /*d2d_mcad22*/\ + MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)) /*d2d_mcad23*/\ + MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)) /*d2d_mcad24*/\ + MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)) /*d2d_mcad25*/\ + MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)) /*d2d_mcad26*/\ + MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)) /*d2d_mcad27*/\ + MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)) /*d2d_mcad28*/\ + MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)) /*d2d_mcad29*/\ + MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)) /*d2d_mcad30*/\ + MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)) /*d2d_mcad31*/\ + MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)) /*d2d_mcad32*/\ + MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)) /*d2d_mcad33*/\ + MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) /*d2d_mcad34*/\ + MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) /*d2d_mcad35*/\ + MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) /*d2d_mcad36*/\ + MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) /*d2d_clk26mi*/\ + MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) /*d2d_nrespwron*/\ + MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) /*d2d_nreswarm */\ + MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) /*d2d_arm9nirq */\ + MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) /*d2d_uma2p6fiq*/\ + MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) /*d2d_spint*/\ + MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) /*d2d_frint*/\ + MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) /*d2d_dmareq0*/\ + MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) /*d2d_dmareq1*/\ + MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) /*d2d_dmareq2*/\ + MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) /*d2d_dmareq3*/\ + MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) /*d2d_n3gtrst*/\ + MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) /*d2d_n3gtdi*/\ + MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) /*d2d_n3gtdo*/\ + MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) /*d2d_n3gtms*/\ + MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) /*d2d_n3gtck*/\ + MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) /*d2d_n3grtck*/\ + MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) /*d2d_mstdby*/\ + MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) /*d2d_swakeup*/\ + MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) /*d2d_idlereq*/\ + MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) /*d2d_idleack*/\ + MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) /*d2d_mwrite*/\ + MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) /*d2d_swrite*/\ + MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) /*d2d_mread*/\ + MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) /*d2d_sread*/\ + MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_mbusflag*/\ + MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_sbusflag*/\ + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1*/\ + +#endif diff --git a/board/omap3/evm/u-boot.lds b/board/omap3/evm/u-boot.lds new file mode 100644 index 0000000..69d8ac9 --- /dev/null +++ b/board/omap3/evm/u-boot.lds @@ -0,0 +1,63 @@ +/* + * January 2004 - Changed to support H4 device + * Copyright (c) 2004 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm_cortexa8/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } + __exidx_start = .; + .ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } + __exidx_end = .; + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/board/omap3/overo/Makefile b/board/omap3/overo/Makefile new file mode 100644 index 0000000..ed5f451 --- /dev/null +++ b/board/omap3/overo/Makefile @@ -0,0 +1,48 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := overo.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + diff --git a/board/omap3/overo/config.mk b/board/omap3/overo/config.mk new file mode 100644 index 0000000..d372fd9 --- /dev/null +++ b/board/omap3/overo/config.mk @@ -0,0 +1,29 @@ +# +# Overo uses OMAP3 (ARM-CortexA8) cpu +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Physical Address: +# 8000'0000 (bank0) +# A000/0000 (bank1) +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +TEXT_BASE = 0x80e80000 diff --git a/board/omap3/overo/overo.c b/board/omap3/overo/overo.c new file mode 100644 index 0000000..7964123 --- /dev/null +++ b/board/omap3/overo/overo.c @@ -0,0 +1,88 @@ +/* + * Maintainer : Steve Sakoman <steve@sakoman.com> + * + * Derived from Beagle Board, 3430 SDP, and OMAP3EVM code by + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * Sunil Kumar <sunilsaini05@gmail.com> + * Shashi Ranjan <shashiranjanmca05@gmail.com> + * + * (C) Copyright 2004-2008 + * Texas Instruments, <www.ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-types.h> +#include "overo.h" + +/****************************************************************************** + * Routine: board_init + * Description: Early hardware init. + *****************************************************************************/ +int board_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ + /* board id for Linux */ + gd->bd->bi_arch_number = MACH_TYPE_OVERO; + /* boot param addr */ + gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); + + return 0; +} + +/****************************************************************************** + * Routine: misc_init_r + * Description: Configure board specific parts + *****************************************************************************/ +int misc_init_r(void) +{ + gpio_t *gpio5_base = (gpio_t *)OMAP34XX_GPIO5_BASE; + gpio_t *gpio6_base = (gpio_t *)OMAP34XX_GPIO6_BASE; + + power_init_r(); + + /* Configure GPIOs to output */ + writel(~((GPIO10) | GPIO9 | GPIO3 | GPIO2), &gpio6_base->oe); + writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 | + GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe); + + /* Set GPIOs */ + writel(GPIO10 | GPIO9 | GPIO3 | GPIO2, &gpio6_base->setdataout); + writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 | + GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout); + + return 0; +} + +/****************************************************************************** + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers specific to the + * hardware. Many pins need to be moved from protect to primary + * mode. + *****************************************************************************/ +void set_muxconf_regs(void) +{ + MUX_OVERO(); +} diff --git a/board/omap3/overo/overo.h b/board/omap3/overo/overo.h new file mode 100644 index 0000000..3c1b6bc --- /dev/null +++ b/board/omap3/overo/overo.h @@ -0,0 +1,381 @@ +/* + * (C) Copyright 2008 + * Steve Sakoman <steve@sakoman.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _OVERO_H_ +#define _OVERO_H_ + +const omap3_sysinfo sysinfo = { + SDP_3430_V1, + SDP_3430_V2, + DDR_STACKED, + "3503", + "Gumstix Overo board", +#if defined(CONFIG_ENV_IS_IN_ONENAND) + "OneNAND", +#else + "NAND", +#endif +}; + +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_OVERO() \ + /*SDRC*/\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ + /*GPMC*/\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ + MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ + MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ + MUX_VAL(CP(GPMC_NCS3), (IEN | PTU | EN | M4)) /*GPIO_54*/\ + /* - MMC1_WP*/\ + MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\ + MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5*/\ + MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M0)) /*GPMC_nCS6*/\ + MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M0)) /*GPMC_nCS7*/\ + MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /*GPMC_nCS3*/\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ + MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ + MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*GPMC_nCS3*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPMC_nCS3*/\ + /*DSS*/\ + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\ + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\ + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\ + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\ + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\ + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\ + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\ + MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\ + MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\ + MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\ + MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\ + MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\ + MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\ + MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\ + MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\ + MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\ + MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\ + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\ + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\ + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\ + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\ + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\ + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\ + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\ + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\ + /*CAMERA*/\ + MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) /*CAM_HS */\ + MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) /*CAM_VS */\ + MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\ + MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) /*CAM_PCLK*/\ + MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*CAM_FLD*/\ + MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) /*CAM_D0*/\ + MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) /*CAM_D1*/\ + MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) /*CAM_D2*/\ + MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) /*CAM_D3*/\ + MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) /*CAM_D4*/\ + MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) /*CAM_D5*/\ + MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) /*CAM_D6*/\ + MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) /*CAM_D7*/\ + MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) /*CAM_D8*/\ + MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) /*CAM_D9*/\ + MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) /*CAM_D10*/\ + MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) /*CAM_D11*/\ + MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M0)) /*CAM_WEN*/\ + MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\ + MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\ + MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\ + MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) /*CSI2_DX1*/\ + MUX_VAL(CP(CSI2_DY1), (IEN | PTU | EN | M4)) /*GPIO_115*/\ + /*Audio Interface */\ + MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\ + MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) /*McBSP2_CLKX*/\ + MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) /*McBSP2_DR*/\ + MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\ + /*Expansion card */\ + MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\ + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\ + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\ + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\ + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\ + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\ + MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /*MMC1_DAT4*/\ + MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /*MMC1_DAT5*/\ + MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\ + MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\ + /*Wireless LAN */\ + MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\ + MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\ + MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\ + MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\ + MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)) /*MMC2_DAT2*/\ + MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)) /*MMC2_DAT3*/\ + MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT0*/\ + MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT1*/\ + MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M1)) /*MMC2_DIR_CMD*/\ + MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M1)) /*MMC2_CLKIN*/\ + /*Bluetooth*/\ + MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M1)) /*UART2_CTS*/\ + MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M1)) /*UART2_RTS*/\ + MUX_VAL(CP(MCBSP3_CLKX), (IDIS | PTD | DIS | M1)) /*UART2_TX*/\ + MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M1)) /*UART2_RX*/\ + MUX_VAL(CP(UART2_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_144 - LCD_EN*/\ + MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_145*/\ + MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M4)) /*GPIO_146*/\ + MUX_VAL(CP(UART2_RX), (IDIS | PTD | DIS | M4)) /*GPIO_147*/\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ + MUX_VAL(CP(UART1_RTS), (IEN | PTU | DIS | M4)) /*GPIO_149*/ \ + MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M4)) /*GPIO_150-MMC3_WP*/\ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ + MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M0)) /*McBSP4_CLKX*/\ + MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M0)) /*McBSP4_DR*/\ + MUX_VAL(CP(MCBSP4_DX), (IEN | PTD | DIS | M0)) /*McBSP4_DX*/\ + MUX_VAL(CP(MCBSP4_FSX), (IEN | PTD | DIS | M0)) /*McBSP4_FSX*/\ + MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0)) /*McBSP1_CLKR*/\ + MUX_VAL(CP(MCBSP1_FSR), (IEN | PTD | DIS | M0)) /*McBSP1_FSR*/\ + MUX_VAL(CP(MCBSP1_DX), (IEN | PTD | DIS | M0)) /*McBSP1_DX*/\ + MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M0)) /*McBSP1_DR*/\ + MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*McBSP_CLKS*/\ + MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0)) /*McBSP1_FSX*/\ + MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0)) /*McBSP1_CLKX*/\ + /*Serial Interface*/\ + MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_RCTX*/\ + MUX_VAL(CP(UART3_RTS_SD), (IEN | PTU | EN | M4)) /*GPIO_164 W2W_*/\ + /* BT_NRESET*/\ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTU | EN | M0)) /*UART3_RX_IRRX*/\ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ + MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\ + MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\ + MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /*HSUSB0_DIR*/\ + MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /*HSUSB0_NXT*/\ + MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA0*/\ + MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA1*/\ + MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA2*/\ + MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA3*/\ + MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA4*/\ + MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA5*/\ + MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA6*/\ + MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA7*/\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\ + MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M4)) /*GPIO_168*/\ + /* - USBH_CPEN*/\ + MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M4)) /*GPIO_183*/\ + /* - USBH_RESET*/\ + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\ + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\ + MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\ + MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\ + MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*HDQ_SIO*/\ + MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) /*McSPI1_CLK*/\ + MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) /*McSPI1_SIMO */\ + MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) /*McSPI1_SOMI */\ + MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) /*McSPI1_CS0*/\ + MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | EN | M0)) /*McSPI1_CS1*/\ + MUX_VAL(CP(MCSPI1_CS2), (IDIS | PTD | DIS | M4)) /*GPIO_176*/\ + MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA2*/\ + MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA7*/\ + MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA4*/\ + MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA5*/\ + MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA6*/\ + MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA3*/\ + /*Control and debug */\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ + MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\ + MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 - MMC1_WP*/\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\ + MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/\ + MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\ + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT1*/\ + MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\ + MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M2)) /*MMC3_CLK*/\ + MUX_VAL(CP(ETK_CTL_ES2), (IEN | PTU | EN | M2)) /*MMC3_CMD*/\ + MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT4*/\ + MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | EN | M4)) /*GPIO_15 - X_GATE*/\ + MUX_VAL(CP(ETK_D2_ES2), (IEN | PTU | EN | M4)) /*GPIO_16*/\ + /* - W2W_NRESET*/\ + MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT3*/\ + MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT0*/\ + MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT1*/\ + MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT2*/\ + MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT7*/\ + MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT6*/\ + MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT5*/\ + MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB2_CLK*/\ + MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | EN | M3)) /*HSUSB2_STP*/\ + MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M3)) /*HSUSB2_DIR*/\ + MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M3)) /*HSUSB2_NXT*/\ + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA0*/\ + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA1*/\ + /* die to die */\ + MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)) /*d2d_mcad1*/\ + MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)) /*d2d_mcad2*/\ + MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)) /*d2d_mcad3*/\ + MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)) /*d2d_mcad4*/\ + MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)) /*d2d_mcad5*/\ + MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)) /*d2d_mcad6*/\ + MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)) /*d2d_mcad7*/\ + MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)) /*d2d_mcad8*/\ + MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)) /*d2d_mcad9*/\ + MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)) /*d2d_mcad10*/\ + MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)) /*d2d_mcad11*/\ + MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)) /*d2d_mcad12*/\ + MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)) /*d2d_mcad13*/\ + MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)) /*d2d_mcad14*/\ + MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)) /*d2d_mcad15*/\ + MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)) /*d2d_mcad16*/\ + MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)) /*d2d_mcad17*/\ + MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)) /*d2d_mcad18*/\ + MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)) /*d2d_mcad19*/\ + MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)) /*d2d_mcad20*/\ + MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)) /*d2d_mcad21*/\ + MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)) /*d2d_mcad22*/\ + MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)) /*d2d_mcad23*/\ + MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)) /*d2d_mcad24*/\ + MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)) /*d2d_mcad25*/\ + MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)) /*d2d_mcad26*/\ + MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)) /*d2d_mcad27*/\ + MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)) /*d2d_mcad28*/\ + MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)) /*d2d_mcad29*/\ + MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)) /*d2d_mcad30*/\ + MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)) /*d2d_mcad31*/\ + MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)) /*d2d_mcad32*/\ + MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)) /*d2d_mcad33*/\ + MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) /*d2d_mcad34*/\ + MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) /*d2d_mcad35*/\ + MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) /*d2d_mcad36*/\ + MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) /*d2d_clk26mi*/\ + MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) /*d2d_nrespwron*/\ + MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) /*d2d_nreswarm */\ + MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) /*d2d_arm9nirq */\ + MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) /*d2d_uma2p6fiq*/\ + MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) /*d2d_spint*/\ + MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) /*d2d_frint*/\ + MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) /*d2d_dmareq0*/\ + MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) /*d2d_dmareq1*/\ + MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) /*d2d_dmareq2*/\ + MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) /*d2d_dmareq3*/\ + MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) /*d2d_n3gtrst*/\ + MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) /*d2d_n3gtdi*/\ + MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) /*d2d_n3gtdo*/\ + MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) /*d2d_n3gtms*/\ + MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) /*d2d_n3gtck*/\ + MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) /*d2d_n3grtck*/\ + MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) /*d2d_mstdby*/\ + MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) /*d2d_swakeup*/\ + MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) /*d2d_idlereq*/\ + MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) /*d2d_idleack*/\ + MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) /*d2d_mwrite*/\ + MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) /*d2d_swrite*/\ + MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) /*d2d_mread*/\ + MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) /*d2d_sread*/\ + MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_mbusflag*/\ + MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_sbusflag*/\ + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1*/ + +#endif diff --git a/board/omap3/overo/u-boot.lds b/board/omap3/overo/u-boot.lds new file mode 100644 index 0000000..69d8ac9 --- /dev/null +++ b/board/omap3/overo/u-boot.lds @@ -0,0 +1,63 @@ +/* + * January 2004 - Changed to support H4 device + * Copyright (c) 2004 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm_cortexa8/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } + __exidx_start = .; + .ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } + __exidx_end = .; + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/board/omap3/pandora/Makefile b/board/omap3/pandora/Makefile new file mode 100644 index 0000000..b41e8a0 --- /dev/null +++ b/board/omap3/pandora/Makefile @@ -0,0 +1,49 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := pandora.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/omap3/pandora/config.mk b/board/omap3/pandora/config.mk new file mode 100644 index 0000000..6b1f69a --- /dev/null +++ b/board/omap3/pandora/config.mk @@ -0,0 +1,33 @@ +# +# (C) Copyright 2006 +# Texas Instruments, <www.ti.com> +# +# Pandora uses OMAP3 (ARM-CortexA8) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Physical Address: +# 8000'0000 (bank0) +# A000/0000 (bank1) +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +TEXT_BASE = 0x80e80000 diff --git a/board/omap3/pandora/pandora.c b/board/omap3/pandora/pandora.c new file mode 100644 index 0000000..3f9de99 --- /dev/null +++ b/board/omap3/pandora/pandora.c @@ -0,0 +1,92 @@ +/* + * (C) Copyright 2008 + * Grazvydas Ignotas <notasas@gmail.com> + * + * Derived from Beagle Board, 3430 SDP, and OMAP3EVM code by + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * Sunil Kumar <sunilsaini05@gmail.com> + * Shashi Ranjan <shashiranjanmca05@gmail.com> + * + * (C) Copyright 2004-2008 + * Texas Instruments, <www.ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-types.h> +#include "pandora.h" + +/****************************************************************************** + * Routine: board_init + * Description: Early hardware init. + *****************************************************************************/ +int board_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ + /* board id for Linux */ + gd->bd->bi_arch_number = MACH_TYPE_OMAP3_PANDORA; + /* boot param addr */ + gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); + + return 0; +} + +/****************************************************************************** + * Routine: misc_init_r + * Description: Configure board specific parts + *****************************************************************************/ +int misc_init_r(void) +{ + gpio_t *gpio1_base = (gpio_t *)OMAP34XX_GPIO1_BASE; + gpio_t *gpio4_base = (gpio_t *)OMAP34XX_GPIO4_BASE; + gpio_t *gpio5_base = (gpio_t *)OMAP34XX_GPIO5_BASE; + gpio_t *gpio6_base = (gpio_t *)OMAP34XX_GPIO6_BASE; + + power_init_r(); + + /* Configure GPIOs to output */ + writel(~(GPIO14 | GPIO15 | GPIO16 | GPIO23), &gpio1_base->oe); + writel(~GPIO22, &gpio4_base->oe); /* 118 */ + writel(~(GPIO0 | GPIO1 | GPIO28 | GPIO29 | GPIO30 | GPIO31), + &gpio5_base->oe); /* 128, 129, 156-159 */ + writel(~GPIO4, &gpio6_base->oe); /* 164 */ + + /* Set GPIOs */ + writel(GPIO28, &gpio5_base->setdataout); + writel(GPIO4, &gpio6_base->setdataout); + + return 0; +} + +/****************************************************************************** + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers specific to the + * hardware. Many pins need to be moved from protect to primary + * mode. + *****************************************************************************/ +void set_muxconf_regs(void) +{ + MUX_PANDORA(); +} diff --git a/board/omap3/pandora/pandora.h b/board/omap3/pandora/pandora.h new file mode 100644 index 0000000..8525a03 --- /dev/null +++ b/board/omap3/pandora/pandora.h @@ -0,0 +1,420 @@ +/* + * (C) Copyright 2008 + * Grazvydas Ignotas <notasas@gmail.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _PANDORA_H_ +#define _PANDORA_H_ + +const omap3_sysinfo sysinfo = { + SDP_3430_V1, + SDP_3430_V2, + DDR_STACKED, + "3530", + "OMAP3 Pandora", + "NAND", +}; + +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_PANDORA() \ + /*SDRC*/\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ + /*GPMC*/\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ + MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ + MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ + MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ + MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M1))\ + MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M1))\ + MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ + MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ + MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ + /*DSS*/\ + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\ + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\ + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\ + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\ + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\ + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\ + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\ + MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\ + MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\ + MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\ + MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\ + MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\ + MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\ + MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\ + MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\ + MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\ + MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\ + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\ + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\ + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\ + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\ + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\ + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\ + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\ + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\ + /*GPIO based game buttons*/\ + MUX_VAL(CP(CAM_XCLKA), (IEN | PTU | DIS | M4)) /*GPIO_96 - LEFT*/\ + MUX_VAL(CP(CAM_PCLK), (IEN | PTU | DIS | M4)) /*GPIO_97 - L2*/\ + MUX_VAL(CP(CAM_FLD), (IEN | PTU | DIS | M4)) /*GPIO_98 - RIGHT*/\ + MUX_VAL(CP(CAM_D0), (IEN | PTU | DIS | M4)) /*GPIO_99 - MENU*/\ + MUX_VAL(CP(CAM_D1), (IEN | PTU | DIS | M4)) /*GPIO_100 - START*/\ + MUX_VAL(CP(CAM_D2), (IEN | PTU | DIS | M4)) /*GPIO_101 - Y*/\ + MUX_VAL(CP(CAM_D3), (IEN | PTU | DIS | M4)) /*GPIO_102 - L1*/\ + MUX_VAL(CP(CAM_D4), (IEN | PTU | DIS | M4)) /*GPIO_103 - DOWN*/\ + MUX_VAL(CP(CAM_D5), (IEN | PTU | DIS | M4)) /*GPIO_104 - SELECT*/\ + MUX_VAL(CP(CAM_D6), (IEN | PTU | DIS | M4)) /*GPIO_105 - R1*/\ + MUX_VAL(CP(CAM_D7), (IEN | PTU | DIS | M4)) /*GPIO_106 - B*/\ + MUX_VAL(CP(CAM_D8), (IEN | PTU | DIS | M4)) /*GPIO_107 - R2*/\ + MUX_VAL(CP(CAM_D10), (IEN | PTU | DIS | M4)) /*GPIO_109 - X*/\ + MUX_VAL(CP(CAM_D11), (IEN | PTU | DIS | M4)) /*GPIO_110 - UP*/\ + MUX_VAL(CP(CAM_XCLKB), (IEN | PTU | DIS | M4)) /*GPIO_111 - A*/\ + /*Audio Interface To External DAC (Headphone, Speakers)*/\ + MUX_VAL(CP(MCBSP2_FSX), (IDIS | PTD | DIS | M0)) /*McBSP2_FSX*/\ + MUX_VAL(CP(MCBSP2_CLKX), (IDIS | PTD | DIS | M0)) /*McBSP2_CLKX*/\ + MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\ + MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*McBSP_CLKS*/\ + MUX_VAL(CP(MCBSP2_DR), (IDIS | PTD | DIS | M4)) /*GPIO_118*/\ + /* - nPOWERDOWN_DAC*/\ + /*Expansion card 1*/\ + MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\ + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\ + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\ + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\ + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\ + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\ + MUX_VAL(CP(MMC1_DAT4), (IEN | PTD | DIS | M4)) /*GPIO_126 - MMC1_WP*/\ + /*Expansion card 2*/\ + MUX_VAL(CP(MMC2_CLK), (IDIS | PTD | DIS | M0)) /*MMC2_CLK*/\ + MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\ + MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\ + MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\ + MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)) /*MMC2_DAT2*/\ + MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)) /*MMC2_DAT3*/\ + MUX_VAL(CP(MMC2_DAT4), (IDIS | PTD | DIS | M1)) /*MMC2_DIR_DAT0*/\ + MUX_VAL(CP(MMC2_DAT5), (IDIS | PTD | DIS | M1)) /*MMC2_DIR_DAT1*/\ + MUX_VAL(CP(MMC2_DAT6), (IDIS | PTD | DIS | M1)) /*MMC2_DIR_CMD */\ + MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M1)) /*MMC2_CLKIN*/\ + MUX_VAL(CP(MMC1_DAT5), (IEN | PTD | DIS | M4)) /*GPIO_127 - MMC2_WP*/\ + /*SDIO Interface to WIFI Module*/\ + MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M2)) /*MMC3_CLK*/\ + MUX_VAL(CP(ETK_CTL_ES2), (IEN | PTD | DIS | M2)) /*MMC3_CMD*/\ + MUX_VAL(CP(ETK_D4_ES2), (IEN | PTD | DIS | M2)) /*MMC3_DAT0*/\ + MUX_VAL(CP(ETK_D5_ES2), (IEN | PTD | DIS | M2)) /*MMC3_DAT1*/\ + MUX_VAL(CP(ETK_D6_ES2), (IEN | PTD | DIS | M2)) /*MMC3_DAT2*/\ + MUX_VAL(CP(ETK_D3_ES2), (IEN | PTD | DIS | M2)) /*MMC3_DAT3*/\ + /*Audio Interface To Bluetooth chip*/\ + MUX_VAL(CP(MCBSP3_DX), (IDIS | PTD | DIS | M0)) /*McBSP3_DX*/\ + MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M0)) /*McBSP3_DR*/\ + MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M0)) /*McBSP3_CLKX*/\ + MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M0)) /*McBSP3_FSX*/\ + /*Digital Interface to Bluetooth (UART)*/\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) /*UART1_RTS*/\ + MUX_VAL(CP(UART1_CTS), (IEN | PTU | EN | M0)) /*UART1_CTS*/\ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ + /*Audio Interface to Triton2 chip (TPS65950)*/\ + MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M0)) /*McBSP4_CLKX*/\ + MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M0)) /*McBSP4_DR*/\ + MUX_VAL(CP(MCBSP4_DX), (IDIS | PTD | DIS | M0)) /*McBSP4_DX*/\ + MUX_VAL(CP(MCBSP4_FSX), (IEN | PTD | DIS | M0)) /*McBSP4_FSX*/\ + /*GPIO definitions for muxed pins on AV connector*/\ + MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M4)) /*GPIO_144,*/\ + /*UART2_CTS*/\ + MUX_VAL(CP(UART2_RTS), (IEN | PTU | DIS | M4)) /*GPIO_145,*/\ + /*UART2_RTS*/\ + MUX_VAL(CP(UART2_TX), (IEN | PTU | EN | M4)) /*GPIO_146,*/\ + /*UART2_TX*/\ + MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M4)) /*GPIO_147,*/\ + /*UART2_RX*/\ + /*Serial Interface (Peripheral boot, Linux console, on AV connector)*/\ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX*/\ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX*/\ + /*LEDs (Controlled by OMAP)*/\ + MUX_VAL(CP(MMC1_DAT6), (IDIS | PTD | DIS | M4)) /*GPIO_128*/\ + /* - LED_MMC1*/\ + MUX_VAL(CP(MMC1_DAT7), (IDIS | PTD | DIS | M4)) /*GPIO_129*/\ + /* - LED_MMC2*/\ + MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M4)) /*GPIO_158*/\ + /* - LED_BT*/\ + MUX_VAL(CP(MCBSP1_DR), (IDIS | PTD | DIS | M4)) /*GPIO_159*/\ + /* - LED_WIFI*/\ + /*Switches*/\ + MUX_VAL(CP(MCSPI1_CS2), (IEN | PTU | DIS | M4)) /*GPIO_176*/\ + /* - nHOLD_SWITCH*/\ + MUX_VAL(CP(CAM_D9), (IEN | PTU | DIS | M4)) /*GPIO_108*/\ + /* - nLID_SWITCH*/\ + /*External IRQs*/\ + MUX_VAL(CP(CAM_HS), (IEN | PTU | DIS | M4)) /*GPIO_94*/\ + /* - nTOUCH_IRQ*/\ + MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | DIS | M4)) /*GPIO_21*/\ + /* - WIFI_IRQ*/\ + MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M4)) /*GPIO_161*/\ + /* - nIRQ_NUB1*/\ + MUX_VAL(CP(CAM_WEN), (IEN | PTU | DIS | M4)) /*GPIO_167*/\ + /* - nIRQ_NUB2*/\ + /*Various other stuff*/\ + MUX_VAL(CP(CAM_VS), (IEN | PTU | DIS | M4)) /*GPIO_95*/\ + /* - nTOUCH_BUSY*/\ + MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | DIS | M4)) /*GPIO_163*/\ + /* - nOC_USB5*/\ + MUX_VAL(CP(MCBSP1_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_162*/\ + /* - START_ADC*/\ + MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | DIS | M4)) /*GPIO_22*/\ + /* - MSECURE*/\ + MUX_VAL(CP(CAM_STROBE), (IEN | PTU | DIS | M4)) /*GPIO_126*/\ + /* - HP_DETECT*/\ + /*External Resets and Enables*/\ + MUX_VAL(CP(ETK_D0_ES2), (IDIS | PTD | DIS | M4)) /*GPIO_14*/\ + /* - nHDPHN_SHUTDOWN*/\ + MUX_VAL(CP(ETK_D1_ES2), (IDIS | PTD | DIS | M4)) /*GPIO_15*/\ + /* - nBT_SHUTDOWN*/\ + MUX_VAL(CP(ETK_D9_ES2), (IDIS | PTD | DIS | M4)) /*GPIO_23*/\ + /* - nWIFI_RESET*/\ + MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | DIS | M4)) /*GPIO_157*/\ + /* - nLCD_RESET*/\ + MUX_VAL(CP(MCBSP1_CLKR), (IDIS | PTD | DIS | M4)) /*GPIO_156*/\ + /* - RESET_NUBS*/\ + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTU | EN | M4)) /*GPIO_164*/\ + /* - EN_USB_5V*/\ + /*Unused*/\ + MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M0)) /*HDQ_SIO - NC*/\ + MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0 - NC*/\ + MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0 - NC*/\ + MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) /*CSI2_DX1 - NC*/\ + MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) /*CSI2_DY1 - NC*/\ + MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) /*I2C2_SCL - NC*/\ + MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) /*I2C2_SDA - NC*/\ + /*HS USB OTG Port (connects to HSUSB0)*/\ + MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\ + MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\ + MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /*HSUSB0_DIR*/\ + MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /*HSUSB0_NXT*/\ + MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA0*/\ + MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA1*/\ + MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA2*/\ + MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA3*/\ + MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA4*/\ + MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA5*/\ + MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA6*/\ + MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA7*/\ + /*I2C Ports*/\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL - T2_CTRL*/\ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA - T2_CTRL*/\ + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL - NUBS*/\ + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA - NUBS*/\ + MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL - T2_SR*/\ + MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA - T2_SR*/\ + /*Serial Interface (Touch, LCD control)*/\ + MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) /*McSPI1_CLK*/\ + MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) /*McSPI1_SIMO*/\ + MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) /*McSPI1_SOMI*/\ + MUX_VAL(CP(MCSPI1_CS0), (IDIS | PTU | EN | M0)) /*McSPI1_CS0 - TOUCH*/\ + MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTU | EN | M0)) /*McSPI1_CS1 - LCD*/\ + /*HS USB HOST Port (connects to HSUSB2)*/\ + MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | DIS | M3)) /*USB_HOST_CLK*/\ + MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | EN | M3)) /*USB_HOST_STP*/\ + MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M3)) /*USB_HOST_DIR*/\ + MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M3)) /*USB_HOST_NXT*/\ + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M3)) /*USB_HOST_D0*/\ + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M3)) /*USB_HOST_D1*/\ + MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | DIS | M3)) /*USB_HOST_D2*/\ + MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | DIS | M3)) /*USB_HOST_D3*/\ + MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M3)) /*USB_HOST_D4*/\ + MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M3)) /*USB_HOST_D5*/\ + MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | DIS | M3)) /*USB_HOST_D6*/\ + MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M3)) /*USB_HOST_D7*/\ + MUX_VAL(CP(ETK_D2_ES2), (IDIS | PTD | DIS | M4)) /*GPIO_16*/\ + /* - nRESET_USB_HOST*/\ + /*Control and debug */\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ + MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\ + MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3*/\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4*/\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\ + MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /*GPIO_8*/\ + MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\ + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M4)) /*SYS_CLKOUT1 - NC*/\ + MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTD | DIS | M4)) /*SYS_CLKOUT2 - NC*/\ + /*JTAG*/\ + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\ + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\ + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\ + MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) /*JTAG_EMU0*/\ + MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) /*JTAG_EMU1*/\ + /*Die to Die stuff*/\ + MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)) /*d2d_mcad1*/\ + MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)) /*d2d_mcad2*/\ + MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)) /*d2d_mcad3*/\ + MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)) /*d2d_mcad4*/\ + MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)) /*d2d_mcad5*/\ + MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)) /*d2d_mcad6*/\ + MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)) /*d2d_mcad7*/\ + MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)) /*d2d_mcad8*/\ + MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)) /*d2d_mcad9*/\ + MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)) /*d2d_mcad10*/\ + MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)) /*d2d_mcad11*/\ + MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)) /*d2d_mcad12*/\ + MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)) /*d2d_mcad13*/\ + MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)) /*d2d_mcad14*/\ + MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)) /*d2d_mcad15*/\ + MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)) /*d2d_mcad16*/\ + MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)) /*d2d_mcad17*/\ + MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)) /*d2d_mcad18*/\ + MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)) /*d2d_mcad19*/\ + MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)) /*d2d_mcad20*/\ + MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)) /*d2d_mcad21*/\ + MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)) /*d2d_mcad22*/\ + MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)) /*d2d_mcad23*/\ + MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)) /*d2d_mcad24*/\ + MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)) /*d2d_mcad25*/\ + MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)) /*d2d_mcad26*/\ + MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)) /*d2d_mcad27*/\ + MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)) /*d2d_mcad28*/\ + MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)) /*d2d_mcad29*/\ + MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)) /*d2d_mcad30*/\ + MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)) /*d2d_mcad31*/\ + MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)) /*d2d_mcad32*/\ + MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)) /*d2d_mcad33*/\ + MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) /*d2d_mcad34*/\ + MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) /*d2d_mcad35*/\ + MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) /*d2d_mcad36*/\ + MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) /*d2d_clk26mi*/\ + MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) /*d2d_nrespwron*/\ + MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) /*d2d_nreswarm*/\ + MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) /*d2d_arm9nirq*/\ + MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) /*d2d_uma2p6fiq*/\ + MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) /*d2d_spint*/\ + MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) /*d2d_frint*/\ + MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) /*d2d_dmareq0*/\ + MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) /*d2d_dmareq1*/\ + MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) /*d2d_dmareq2*/\ + MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) /*d2d_dmareq3*/\ + MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) /*d2d_n3gtrst*/\ + MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) /*d2d_n3gtdi*/\ + MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) /*d2d_n3gtdo*/\ + MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) /*d2d_n3gtms*/\ + MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) /*d2d_n3gtck*/\ + MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) /*d2d_n3grtck*/\ + MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) /*d2d_mstdby*/\ + MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) /*d2d_swakeup*/\ + MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) /*d2d_idlereq*/\ + MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) /*d2d_idleack*/\ + MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) /*d2d_mwrite*/\ + MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) /*d2d_swrite*/\ + MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) /*d2d_mread*/\ + MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) /*d2d_sread*/\ + MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_mbusflag*/\ + MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_sbusflag*/\ + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1*/ + +#endif diff --git a/board/omap3/pandora/u-boot.lds b/board/omap3/pandora/u-boot.lds new file mode 100644 index 0000000..69d8ac9 --- /dev/null +++ b/board/omap3/pandora/u-boot.lds @@ -0,0 +1,63 @@ +/* + * January 2004 - Changed to support H4 device + * Copyright (c) 2004 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm_cortexa8/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } + __exidx_start = .; + .ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } + __exidx_end = .; + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/board/omap3/zoom1/Makefile b/board/omap3/zoom1/Makefile new file mode 100644 index 0000000..9e87f17 --- /dev/null +++ b/board/omap3/zoom1/Makefile @@ -0,0 +1,49 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := zoom1.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/omap3/zoom1/config.mk b/board/omap3/zoom1/config.mk new file mode 100644 index 0000000..7347497 --- /dev/null +++ b/board/omap3/zoom1/config.mk @@ -0,0 +1,33 @@ +# +# (C) Copyright 2006-2008 +# Texas Instruments, <www.ti.com> +# +# Zoom MDK uses OMAP3 (ARM-CortexA8) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Physical Address: +# 8000'0000 (bank0) +# A000/0000 (bank1) +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +TEXT_BASE = 0x80e80000 diff --git a/board/omap3/zoom1/u-boot.lds b/board/omap3/zoom1/u-boot.lds new file mode 100644 index 0000000..01047c3 --- /dev/null +++ b/board/omap3/zoom1/u-boot.lds @@ -0,0 +1,63 @@ +/* + * January 2004 - Changed to support H4 device + * Copyright (c) 2004-2008 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm_cortexa8/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } + __exidx_start = .; + .ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } + __exidx_end = .; + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/board/omap3/zoom1/zoom1.c b/board/omap3/zoom1/zoom1.c new file mode 100644 index 0000000..d67abf7 --- /dev/null +++ b/board/omap3/zoom1/zoom1.c @@ -0,0 +1,77 @@ +/* + * (C) Copyright 2004-2008 + * Texas Instruments, <www.ti.com> + * + * Author : + * Nishanth Menon <nm@ti.com> + * + * Derived from Beagle Board and 3430 SDP code by + * Sunil Kumar <sunilsaini05@gmail.com> + * Shashi Ranjan <shashiranjanmca05@gmail.com> + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-types.h> +#include "zoom1.h" + +/****************************************************************************** + * Routine: board_init + * Description: Early hardware init. + *****************************************************************************/ +int board_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ + /* board id for Linux */ + gd->bd->bi_arch_number = MACH_TYPE_OMAP_LDP; + /* boot param addr */ + gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); + + return 0; +} + +/****************************************************************************** + * Routine: misc_init_r + * Description: Configure zoom board specific configurations + *****************************************************************************/ +int misc_init_r(void) +{ + power_init_r(); + return 0; +} + +/****************************************************************************** + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers specific to the + * hardware. Many pins need to be moved from protect to primary + * mode. + *****************************************************************************/ +void set_muxconf_regs(void) +{ + /* platform specific muxes */ + MUX_ZOOM1_MDK(); +} diff --git a/board/omap3/zoom1/zoom1.h b/board/omap3/zoom1/zoom1.h new file mode 100644 index 0000000..d389492 --- /dev/null +++ b/board/omap3/zoom1/zoom1.h @@ -0,0 +1,135 @@ +/* + * (C) Copyright 2008 + * Texas Instruments + * Nishanth Menon <nm@ti.com> + * + * Derived from: board/omap3/beagle/beagle.h + * Dirk Behme <dirk.behme@gmail.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _BOARD_ZOOM1_H_ +#define _BOARD_ZOOM1_H_ + +const omap3_sysinfo sysinfo = { + SDP_3430_V1, + SDP_3430_V2, + DDR_STACKED, + "3430", + "OMAP3 Zoom MDK Rev 1", + "NAND", +}; + +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_ZOOM1_MDK() \ + /*SDRC*/\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ + /*GPMC*/\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ + MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M7)) /*GPMC_nCS1*/\ + MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M7)) /*GPMC_nCS2*/\ + MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M7)) /*GPMC_nCS3*/\ + MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M7)) /*GPMC_nCS4*/\ + MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | DIS | M7)) /*GPMC_nCS5*/\ + MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M7)) /*GPMC_nCS6*/\ + MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M7)) /*GPMC_nCS7*/\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ + MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_NWP), (IDIS | PTU | DIS | M0)) /*GPMC_nWP*/\ + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ + MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /*GPMC_nBE1*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTD | EN | M0)) /*GPMC_WAIT0*/\ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*GPMC_WAIT2*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPMC_WAIT3*/ + +#endif /* _BOARD_ZOOM_H_ */ diff --git a/board/smdk2400/Makefile b/board/samsung/smdk2400/Makefile index 90cb2b8..90cb2b8 100644 --- a/board/smdk2400/Makefile +++ b/board/samsung/smdk2400/Makefile diff --git a/board/smdk2400/config.mk b/board/samsung/smdk2400/config.mk index 82400bf..82400bf 100644 --- a/board/smdk2400/config.mk +++ b/board/samsung/smdk2400/config.mk diff --git a/board/smdk2400/flash.c b/board/samsung/smdk2400/flash.c index 9eee60d..9eee60d 100644 --- a/board/smdk2400/flash.c +++ b/board/samsung/smdk2400/flash.c diff --git a/board/smdk2400/lowlevel_init.S b/board/samsung/smdk2400/lowlevel_init.S index a7959f3..a7959f3 100644 --- a/board/smdk2400/lowlevel_init.S +++ b/board/samsung/smdk2400/lowlevel_init.S diff --git a/board/smdk2400/smdk2400.c b/board/samsung/smdk2400/smdk2400.c index 4d1f1a6..4d1f1a6 100644 --- a/board/smdk2400/smdk2400.c +++ b/board/samsung/smdk2400/smdk2400.c diff --git a/board/smdk2400/u-boot.lds b/board/samsung/smdk2400/u-boot.lds index 987b07d..987b07d 100644 --- a/board/smdk2400/u-boot.lds +++ b/board/samsung/smdk2400/u-boot.lds diff --git a/board/smdk2410/Makefile b/board/samsung/smdk2410/Makefile index 5d0cd72..5d0cd72 100644 --- a/board/smdk2410/Makefile +++ b/board/samsung/smdk2410/Makefile diff --git a/board/smdk2410/config.mk b/board/samsung/smdk2410/config.mk index 1af85da..1af85da 100644 --- a/board/smdk2410/config.mk +++ b/board/samsung/smdk2410/config.mk diff --git a/board/smdk2410/flash.c b/board/samsung/smdk2410/flash.c index 132d752..132d752 100644 --- a/board/smdk2410/flash.c +++ b/board/samsung/smdk2410/flash.c diff --git a/board/smdk2410/lowlevel_init.S b/board/samsung/smdk2410/lowlevel_init.S index ab6afdd..ab6afdd 100644 --- a/board/smdk2410/lowlevel_init.S +++ b/board/samsung/smdk2410/lowlevel_init.S diff --git a/board/smdk2410/smdk2410.c b/board/samsung/smdk2410/smdk2410.c index 802348d..802348d 100644 --- a/board/smdk2410/smdk2410.c +++ b/board/samsung/smdk2410/smdk2410.c diff --git a/board/smdk2410/u-boot.lds b/board/samsung/smdk2410/u-boot.lds index 987b07d..987b07d 100644 --- a/board/smdk2410/u-boot.lds +++ b/board/samsung/smdk2410/u-boot.lds diff --git a/board/st/nmdk8815/Makefile b/board/st/nmdk8815/Makefile new file mode 100644 index 0000000..be9a424 --- /dev/null +++ b/board/st/nmdk8815/Makefile @@ -0,0 +1,55 @@ +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2004 +# ARM Ltd. +# Philippe Robin, <philippe.robin@arm.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := nmdk8815.o +SOBJS := platform.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/st/nmdk8815/config.mk b/board/st/nmdk8815/config.mk new file mode 100644 index 0000000..590393b --- /dev/null +++ b/board/st/nmdk8815/config.mk @@ -0,0 +1,26 @@ +# (C) Copyright 2007 +# STMicroelectronics, <www.st.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# +# image should be loaded at 0x01000000 +# + +TEXT_BASE = 0x03F80000 diff --git a/board/st/nmdk8815/nmdk8815.c b/board/st/nmdk8815/nmdk8815.c new file mode 100644 index 0000000..c54eac1 --- /dev/null +++ b/board/st/nmdk8815/nmdk8815.c @@ -0,0 +1,72 @@ +/* + * (C) Copyright 2005 + * STMicrolelctronics, <www.st.com> + * + * (C) Copyright 2004 + * ARM Ltd. + * Philippe Robin, <philippe.robin@arm.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_SHOW_BOOT_PROGRESS +void show_boot_progress(int progress) +{ + printf("%i\n", progress); +} +#endif + +/* + * Miscellaneous platform dependent initialisations + */ +int board_init(void) +{ + gd->bd->bi_arch_number = MACH_TYPE_NOMADIK; + gd->bd->bi_boot_params = 0x00000100; + writel(0xC37800F0, NOMADIK_GPIO1_BASE + 0x20); + writel(0x00000000, NOMADIK_GPIO1_BASE + 0x24); + writel(0x00000000, NOMADIK_GPIO1_BASE + 0x28); + writel(readl(NOMADIK_SRC_BASE) | 0x8000, NOMADIK_SRC_BASE); + + icache_enable(); + + return 0; +} + +int misc_init_r(void) +{ + setenv("verify", "n"); + return 0; +} + +int dram_init(void) +{ + /* set dram bank start addr and size */ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; + return 0; +} diff --git a/board/st/nmdk8815/platform.S b/board/st/nmdk8815/platform.S new file mode 100644 index 0000000..2a67110 --- /dev/null +++ b/board/st/nmdk8815/platform.S @@ -0,0 +1,340 @@ +/* + * Board specific setup info + * + * (C) Copyright 2005 + * STMicrolelctronics, <www.st.com> + * + * (C) Copyright 2004, ARM Ltd. + * Philippe Robin, <philippe.robin@arm.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> + +.globl lowlevel_init +lowlevel_init: + /* Jump to the flash address */ + ldr r0, =CFG_ONENAND_BASE + + /* + * Make it independent whether we boot from 0x0 or 0x30000000. + * Non-portable: it relies on the knowledge that ip has to be updated + */ + orr ip, ip, r0 /* adjust return address of cpu_init_crit */ + orr lr, lr, r0 /* adjust return address */ + orr pc, pc, r0 /* jump to the normal address */ + nop + + /* Initialize PLL, Remap clear, FSMC, MPMC here! */ + /* What about GPIO, CLCD and UART */ + + /* PLL Initialization */ + /* Prog the PLL1 @ 266 MHz ==> SDRAM Clock = 100.8 MHz */ + ldr r0, =NOMADIK_SRC_BASE + + ldr r1, =0x2B013502 + + str r1, [r0, #0x14] + + /* Used to set all the timers clock to 2.4MHZ */ + ldr r1, =0x2AAAA004 + str r1, [r0] + + ldr r1, =0x10000000 + str r1, [r0, #0x10] + + /* FSMC setup ---- */ + ldr r0, =NOMADIK_FSMC_BASE + + ldr r1, =0x10DB /* For 16-bit NOR flash */ + str r1, [r0, #0x08] + + ldr r1, =0x03333333 /* For 16-bit NOR flash */ + str r1, [r0, #0xc] + + /* oneNAND setting */ + ldr r1, =0x0000105B /* BCR0 Prog control register */ + str r1, [r0] + + ldr r1, =0x0A200551 /* BTR0 Prog timing register */ + str r1, [r0, #0x04] + + /* preload the instructions into icache */ + add r0, pc, #0x1F + bic r0, r0, #0x1F + mcr p15, 0, r0, c7, c13, 1 + add r0, r0, #0x20 + mcr p15, 0, r0, c7, c13, 1 + + /* Now Clear Remap */ + ldr r0, =NOMADIK_SRC_BASE + + ldr r1, =0x2004 + str r1, [r0] + + ldr r1, =0x10000000 + str r1, [r0, #0x10] + + ldr r0, =0x101E9000 + ldr r1, =0x2004 + str r1, [r0] + + ldr r0, =NOMADIK_SRC_BASE + ldr r1, =0x2104 + str r1, [r0] + + /* FSMC setup -- */ + mov r0, #(NOMADIK_FSMC_BASE & 0x10000000) + orr r0, r0, #(NOMADIK_FSMC_BASE & 0x0FFFFFFF) + + ldr r1, =0x10DB /* For 16-bit NOR flash */ + str r1, [r0, #0x8] + + ldr r1, =0x03333333 /* For 16-bit NOR flash */ + str r1, [r0, #0xc] + + /* MPMC Setup */ + ldr r0, =NOMADIK_MPMC_BASE + + ldr r1, =0xF00003 + str r1, [r0] /* Enable the MPMC and the DLL */ + + ldr r1, =0x183 + str r1, [r0, #0x20] + + ldr r2, =NOMADIK_PMU_BASE + + ldr r1, =0x1111 + str r1, [r2] + + ldr r1, =0x1111 /* Prog the, mand delay strategy */ + str r1, [r0, #0x28] + + ldr r1, =0x103 /* NOP ,mand */ + str r1, [r0, #0x20] + + /* FIXME -- Wait required here */ + + ldr r1, =0x103 /* PALL ,mand*/ + str r1, [r0, #0x20] + + ldr r1, =0x1 + str r1, [r0, #0x24] /* To do at least two auto-refresh */ + + /* FIXME -- Wait required here */ + + /* Auto-refresh period = 7.8us @ SDRAM Clock = 100.8 MHz */ + ldr r1, =0x31 + str r1, [r0, #0x24] + + /* Prog Little Endian, Not defined in 8800 board */ + ldr r1, =0x0 + str r1, [r0, #0x8] + + + ldr r1, =0x2 + str r1, [r0, #0x30] /* Prog tRP timing */ + + ldr r1, =0x4 /* Change for 8815 */ + str r1, [r0, #0x34] /* Prog tRAS timing */ + + ldr r1, =0xB + str r1, [r0, #0x38] /* Prog tSREX timing */ + + + ldr r1, =0x1 + str r1, [r0, #0x44] /* Prog tWR timing */ + + ldr r1, =0x8 + str r1, [r0, #0x48] /* Prog tRC timing */ + + ldr r1, =0xA + str r1, [r0, #0x4C] /* Prog tRFC timing */ + + ldr r1, =0xB + str r1, [r0, #0x50] /* Prog tXSR timing */ + + ldr r1, =0x1 + str r1, [r0, #0x54] /* Prog tRRD timing */ + + ldr r1, =0x1 + str r1, [r0, #0x58] /* Prog tMRD timing */ + + ldr r1, =0x1 + str r1, [r0, #0x5C] /* Prog tCDLR timing */ + + /* DDR-SDRAM MEMORY IS ON BANK0 8815 */ + ldr r1, =0x304 /* Prog RAS and CAS for CS 0 */ + str r1, [r0, #0x104] + + /* SDR-SDRAM MEMORY IS ON BANK1 8815 */ + ldr r1, =0x304 /* Prog RAS and CAS for CS 1 */ + str r1, [r0, #0x124] + /* THE DATA BUS WIDE IS PROGRAM FOR 16-BITS */ + /* DDR-SDRAM MEMORY IS ON BANK0*/ + + ldr r1, =0x884 /* 8815 : config reg in BRC for CS0 */ + str r1, [r0, #0x100] + + /*SDR-SDRAM MEMORY IS ON BANK1*/ + + ldr r1, =0x884 /* 8815 : config reg in BRC for CS1 */ + str r1, [r0, #0x120] + + ldr r1, =0x83 /*MODE Mand*/ + str r1, [r0, #0x20] + + /* LOAD MODE REGISTER FOR 2 bursts of 16b, with DDR mem ON BANK0 */ + + ldr r1, =0x62000 /*Data in*/ + ldr r1, [r1] + + /* LOAD MODE REGISTER FOR 2 bursts of 16b, with DDR mem ON BANK1 */ + + ldr r1, =0x8062000 + ldr r1, [r1] + + ldr r1, =0x003 + str r1, [r0, #0x20] + + /* ENABLE ALL THE BUFFER FOR EACH AHB PORT*/ + + ldr r1, =0x01 /* Enable buffer 0 */ + str r1, [r0, #0x400] + + ldr r1, =0x01 /* Enable buffer 1 */ + str r1, [r0, #0x420] + + ldr r1, =0x01 /* Enable buffer 2 */ + str r1, [r0, #0x440] + + ldr r1, =0x01 /* Enable buffer 3 */ + str r1, [r0, #0x460] + + ldr r1, =0x01 /* Enable buffer 4 */ + str r1, [r0, #0x480] + + ldr r1, =0x01 /* Enable buffer 5 */ + str r1, [r0, #0x4A0] + + /* GPIO settings */ + + ldr r0, =NOMADIK_GPIO1_BASE + + ldr r1, =0xC0600000 + str r1, [r0, #0x20] + + ldr r1, =0x3F9FFFFF /* ABHI change this for uart1 */ + str r1, [r0, #0x24] + + ldr r1, =0x3F9FFFFF /* ABHI change this for uart1 */ + str r1, [r0, #0x28] + + ldr r0, =NOMADIK_GPIO0_BASE + + ldr r1, =0xFFFFFFFF + str r1, [r0, #0x20] + + ldr r1, =0x00 + str r1, [r0, #0x24] + + ldr r1, =0x00 + str r1, [r0, #0x28] + + /* Configure CPLD_CTRL register for enabling MUX logic for UART0/UART2 */ + + ldr r0, =NOMADIK_FSMC_BASE + + ldr r1, =0x10DB /* INIT FSMC bank 0 */ + str r1, [r0, #0x00] + + ldr r1, =0x0FFFFFFF + str r1, [r0, #0x04] + + ldr r1, =0x010DB /* INIT FSMC bank 1 */ + str r1, [r0, #0x08] + + ldr r1, =0x00FFFFFFF + str r1, [r0, #0x0C] + + ldr r0, =NOMADIK_UART0_BASE + + ldr r1, =0x00000000 + str r1, [r0, #0x30] + + ldr r1, =0x0000004e + str r1, [r0, #0x24] + + ldr r1, =0x00000008 + str r1, [r0, #0x28] + + ldr r1, =0x00000060 + str r1, [r0, #0x2C] + + ldr r1, =0x00000301 + str r1, [r0, #0x30] + + ldr r1, =0x00000066 + str r1, [r0] + + ldr r0, =NOMADIK_UART1_BASE + + ldr r1, =0x00000000 + str r1, [r0, #0x30] + + ldr r1, =0x0000004e + str r1, [r0, #0x24] + + ldr r1, =0x00000008 + str r1, [r0, #0x28] + + ldr r1, =0x00000060 + str r1, [r0, #0x2C] + + ldr r1, =0x00000301 + str r1, [r0, #0x30] + + ldr r1, =0x00000066 + str r1, [r0] + + ldr r0, =NOMADIK_UART2_BASE + + ldr r1, =0x00000000 + str r1, [r0, #0x30] + + ldr r1, =0x0000004e + str r1, [r0, #0x24] + + ldr r1, =0x00000008 + str r1, [r0, #0x28] + + ldr r1, =0x00000060 + str r1, [r0, #0x2C] + + ldr r1, =0x00000301 + str r1, [r0, #0x30] + + ldr r1, =0x00000066 + str r1, [r0] + + /* Configure CPLD to enable UART0 */ + + mov pc, lr diff --git a/board/st/nmdk8815/u-boot.lds b/board/st/nmdk8815/u-boot.lds new file mode 100644 index 0000000..6d6481b --- /dev/null +++ b/board/st/nmdk8815/u-boot.lds @@ -0,0 +1,51 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + . = ALIGN(4); + .text : + { + cpu/arm926ejs/start.o (.text) + *(.text) + } + . = ALIGN(4); + .rodata : { *(.rodata) } + . = ALIGN(4); + .data : { *(.data) } + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss (NOLOAD) : { *(.bss) . = ALIGN(4); } + _end = .; +} diff --git a/cpu/arm926ejs/nomadik/Makefile b/cpu/arm926ejs/nomadik/Makefile new file mode 100644 index 0000000..e3bd2ee --- /dev/null +++ b/cpu/arm926ejs/nomadik/Makefile @@ -0,0 +1,46 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).a + +COBJS = timer.o +SOBJS = reset.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) $(addprefix $(obj),$(SOBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/arm926ejs/nomadik/reset.S b/cpu/arm926ejs/nomadik/reset.S new file mode 100644 index 0000000..948996b --- /dev/null +++ b/cpu/arm926ejs/nomadik/reset.S @@ -0,0 +1,25 @@ +#include <config.h> +/* + * Processor reset for Nomadik + */ + + .align 5 +.globl reset_cpu +reset_cpu: +#if defined CONFIG_NOMADIK_8815 + ldr r0, =NOMADIK_SRC_BASE + ldr r1, =0x1 + str r1, [r0, #0x18] +#else + ldr r1, rstctl1 /* get clkm1 reset ctl */ + mov r3, #0x0 + strh r3, [r1] /* clear it */ + mov r3, #0x8 + strh r3, [r1] /* force dsp+arm reset */ +#endif + +_loop_forever: + b _loop_forever + +rstctl1: + .word 0xfffece10 diff --git a/cpu/arm926ejs/nomadik/timer.c b/cpu/arm926ejs/nomadik/timer.c new file mode 100644 index 0000000..2b2208c --- /dev/null +++ b/cpu/arm926ejs/nomadik/timer.c @@ -0,0 +1,183 @@ +/* + * (C) Copyright 2003 + * Texas Instruments <www.ti.com> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Alex Zuepke <azu@sysgo.de> + * + * (C) Copyright 2002-2004 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * (C) Copyright 2004 + * Philippe Robin, ARM Ltd. <philippe.robin@arm.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <arm926ejs.h> + +#define TIMER_LOAD_VAL 0xffffffff + +/* macro to read the 32 bit timer */ +#define READ_TIMER readl(CONFIG_SYS_TIMERBASE + 20) + +static ulong timestamp; +static ulong lastdec; + +/* nothing really to do with interrupts, just starts up a counter. */ +int timer_init(void) +{ + /* Load timer with initial value */ + writel(TIMER_LOAD_VAL, CONFIG_SYS_TIMERBASE + 16); + + /* + * Set timer to be enabled, free-running, no interrupts, 256 divider, + * 32-bit, wrap-mode + */ + writel(0x8a, CONFIG_SYS_TIMERBASE + 24); + + /* init the timestamp and lastdec value */ + reset_timer_masked(); + + return 0; +} + +/* + * timer without interrupts + */ +void reset_timer(void) +{ + reset_timer_masked(); +} + +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +void set_timer(ulong t) +{ + timestamp = t; +} + +/* delay x useconds AND perserve advance timstamp value */ +void udelay(unsigned long usec) +{ + ulong tmo, tmp; + + if (usec >= 1000) { + /* if "big" number, spread normalization to seconds */ + tmo = usec / 1000; /* start to normalize */ + tmo *= CONFIG_SYS_HZ; /* find number of "ticks" */ + tmo /= 1000; /* finish normalize. */ + } else { + /* small number, don't kill it prior to HZ multiply */ + tmo = usec * CONFIG_SYS_HZ; + tmo /= (1000 * 1000); + } + + tmp = get_timer(0); /* get current timestamp */ + if ((tmo + tmp + 1) < tmp) /* will roll time stamp? */ + reset_timer_masked(); /* reset to 0, set lastdec value */ + else + tmo += tmp; + + while (get_timer_masked() < tmo) + /* nothing */ ; +} + +void reset_timer_masked(void) +{ + /* reset time */ + lastdec = READ_TIMER; /* capure current decrementer value time */ + timestamp = 0; /* start "advancing" time stamp from 0 */ +} + +ulong get_timer_masked(void) +{ + ulong now = READ_TIMER; /* current tick value */ + + if (lastdec >= now) { /* normal mode (non roll) */ + /* move stamp fordward */ + timestamp += lastdec - now; + } else { + /* + * An overflow is expected. + * nts = ts + ld + (TLV - now) + * ts=old stamp, ld=time that passed before passing through -1 + * (TLV-now) amount of time after passing though -1 + * nts = new "advancing time stamp"...it could also roll + */ + timestamp += lastdec + TIMER_LOAD_VAL - now; + } + lastdec = now; + + return timestamp; +} + +/* waits specified delay value and resets timestamp */ +void udelay_masked(unsigned long usec) +{ + ulong tmo; + + if (usec >= 1000) { + /* if "big" number, spread normalization to seconds */ + tmo = usec / 1000; /* start to normalize */ + tmo *= CONFIG_SYS_HZ; /* find number of "ticks" */ + tmo /= 1000; /* finish normalize. */ + } else { + /* else small number, don't kill it prior to HZ multiply */ + tmo = usec * CONFIG_SYS_HZ; + tmo /= (1000*1000); + } + + reset_timer_masked(); + /* set "advancing" timestamp to 0, set lastdec vaule */ + + while (get_timer_masked() < tmo) + /* nothing */ ; +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + ulong tbclk; + + tbclk = CONFIG_SYS_HZ; + return tbclk; +} diff --git a/cpu/arm_cortexa8/Makefile b/cpu/arm_cortexa8/Makefile new file mode 100644 index 0000000..ae20299 --- /dev/null +++ b/cpu/arm_cortexa8/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(CPU).a + +START := start.o +COBJS := cpu.o + +SRCS := $(START:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +#########################################################################
\ No newline at end of file diff --git a/cpu/arm_cortexa8/config.mk b/cpu/arm_cortexa8/config.mk new file mode 100644 index 0000000..b021762 --- /dev/null +++ b/cpu/arm_cortexa8/config.mk @@ -0,0 +1,36 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <gj@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \ + -msoft-float + +# Make ARMv5 to allow more compilers to work, even though its v7a. +PLATFORM_CPPFLAGS += -march=armv5 +# ========================================================================= +# +# Supply options according to compiler version +# +# ========================================================================= +PLATFORM_CPPFLAGS +=$(call cc-option) +PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) +PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,\ + $(call cc-option,-malignment-traps,))
\ No newline at end of file diff --git a/cpu/arm_cortexa8/cpu.c b/cpu/arm_cortexa8/cpu.c new file mode 100644 index 0000000..ebc5ea2 --- /dev/null +++ b/cpu/arm_cortexa8/cpu.c @@ -0,0 +1,241 @@ +/* + * (C) Copyright 2008 Texas Insturments + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * CPU specific code + */ + +#include <common.h> +#include <command.h> +#include <asm/arch/sys_proto.h> + +#ifdef CONFIG_USE_IRQ +DECLARE_GLOBAL_DATA_PTR; +#endif + +#ifndef CONFIG_L2_OFF +void l2cache_disable(void); +#endif + +static void cache_flush(void); + +/* read co-processor 15, register #1 (control register) */ +static unsigned long read_p15_c1(void) +{ + unsigned long value; + + __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 0\ + @ read control reg\n":"=r"(value) + ::"memory"); + return value; +} + +/* write to co-processor 15, register #1 (control register) */ +static void write_p15_c1(unsigned long value) +{ + __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 0\ + @ write it back\n"::"r"(value) + : "memory"); + + read_p15_c1(); +} + +static void cp_delay(void) +{ + /* Many OMAP regs need at least 2 nops */ + asm("nop"); + asm("nop"); +} + +/* See also ARM Ref. Man. */ +#define C1_MMU (1<<0) /* mmu off/on */ +#define C1_ALIGN (1<<1) /* alignment faults off/on */ +#define C1_DC (1<<2) /* dcache off/on */ +#define C1_WB (1<<3) /* merging write buffer on/off */ +#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */ +#define C1_SYS_PROT (1<<8) /* system protection */ +#define C1_ROM_PROT (1<<9) /* ROM protection */ +#define C1_IC (1<<12) /* icache off/on */ +#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */ +#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */ + +int cpu_init(void) +{ + /* + * setup up stacks if necessary + */ +#ifdef CONFIG_USE_IRQ + IRQ_STACK_START = + _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4; + FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ; +#endif + return 0; +} + +int cleanup_before_linux(void) +{ + unsigned int i; + + /* + * this function is called just before we call linux + * it prepares the processor for linux + * + * we turn off caches etc ... + */ + disable_interrupts(); + + /* turn off I/D-cache */ + icache_disable(); + dcache_disable(); + + /* invalidate I-cache */ + cache_flush(); + +#ifndef CONFIG_L2_OFF + /* turn off L2 cache */ + l2cache_disable(); + /* invalidate L2 cache also */ + v7_flush_dcache_all(get_device_type()); +#endif + i = 0; + /* mem barrier to sync up things */ + asm("mcr p15, 0, %0, c7, c10, 4": :"r"(i)); + +#ifndef CONFIG_L2_OFF + l2cache_enable(); +#endif + + return 0; +} + +int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + disable_interrupts(); + reset_cpu(0); + + /* NOTREACHED */ + return 0; +} + +void icache_enable(void) +{ + ulong reg; + + reg = read_p15_c1(); /* get control reg. */ + cp_delay(); + write_p15_c1(reg | C1_IC); +} + +void icache_disable(void) +{ + ulong reg; + + reg = read_p15_c1(); + cp_delay(); + write_p15_c1(reg & ~C1_IC); +} + +void dcache_disable (void) +{ + ulong reg; + + reg = read_p15_c1 (); + cp_delay (); + write_p15_c1 (reg & ~C1_DC); +} + +void l2cache_enable() +{ + unsigned long i; + volatile unsigned int j; + + /* ES2 onwards we can disable/enable L2 ourselves */ + if (get_cpu_rev() == CPU_3430_ES2) { + __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(i)); + __asm__ __volatile__("orr %0, %0, #0x2":"=r"(i)); + __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1":"=r"(i)); + } else { + /* Save r0, r12 and restore them after usage */ + __asm__ __volatile__("mov %0, r12":"=r"(j)); + __asm__ __volatile__("mov %0, r0":"=r"(i)); + + /* + * GP Device ROM code API usage here + * r12 = AUXCR Write function and r0 value + */ + __asm__ __volatile__("mov r12, #0x3"); + __asm__ __volatile__("mrc p15, 0, r0, c1, c0, 1"); + __asm__ __volatile__("orr r0, r0, #0x2"); + /* SMI instruction to call ROM Code API */ + __asm__ __volatile__(".word 0xE1600070"); + __asm__ __volatile__("mov r0, %0":"=r"(i)); + __asm__ __volatile__("mov r12, %0":"=r"(j)); + } + +} + +void l2cache_disable() +{ + unsigned long i; + volatile unsigned int j; + + /* ES2 onwards we can disable/enable L2 ourselves */ + if (get_cpu_rev() == CPU_3430_ES2) { + __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(i)); + __asm__ __volatile__("bic %0, %0, #0x2":"=r"(i)); + __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1":"=r"(i)); + } else { + /* Save r0, r12 and restore them after usage */ + __asm__ __volatile__("mov %0, r12":"=r"(j)); + __asm__ __volatile__("mov %0, r0":"=r"(i)); + + /* + * GP Device ROM code API usage here + * r12 = AUXCR Write function and r0 value + */ + __asm__ __volatile__("mov r12, #0x3"); + __asm__ __volatile__("mrc p15, 0, r0, c1, c0, 1"); + __asm__ __volatile__("bic r0, r0, #0x2"); + /* SMI instruction to call ROM Code API */ + __asm__ __volatile__(".word 0xE1600070"); + __asm__ __volatile__("mov r0, %0":"=r"(i)); + __asm__ __volatile__("mov r12, %0":"=r"(j)); + } +} + +int icache_status(void) +{ + return (read_p15_c1() & C1_IC) != 0; +} + +static void cache_flush(void) +{ + asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (0)); +} + diff --git a/cpu/arm_cortexa8/omap3/Makefile b/cpu/arm_cortexa8/omap3/Makefile new file mode 100644 index 0000000..b96b3dd --- /dev/null +++ b/cpu/arm_cortexa8/omap3/Makefile @@ -0,0 +1,46 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).a + +SOBJS := lowlevel_init.o +COBJS := sys_info.o board.o clock.o interrupts.o mem.o syslib.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/arm_cortexa8/omap3/board.c b/cpu/arm_cortexa8/omap3/board.c new file mode 100644 index 0000000..7bb3e28 --- /dev/null +++ b/cpu/arm_cortexa8/omap3/board.c @@ -0,0 +1,344 @@ +/* + * + * Common board functions for OMAP3 based boards. + * + * (C) Copyright 2004-2008 + * Texas Instruments, <www.ti.com> + * + * Author : + * Sunil Kumar <sunilsaini05@gmail.com> + * Shashi Ranjan <shashiranjanmca05@gmail.com> + * + * Derived from Beagle Board and 3430 SDP code by + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mem.h> + +extern omap3_sysinfo sysinfo; + +/****************************************************************************** + * Routine: delay + * Description: spinning delay to use before udelay works + *****************************************************************************/ +static inline void delay(unsigned long loops) +{ + __asm__ volatile ("1:\n" "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0"(loops)); +} + +/****************************************************************************** + * Routine: secure_unlock + * Description: Setup security registers for access + * (GP Device only) + *****************************************************************************/ +void secure_unlock_mem(void) +{ + pm_t *pm_rt_ape_base = (pm_t *)PM_RT_APE_BASE_ADDR_ARM; + pm_t *pm_gpmc_base = (pm_t *)PM_GPMC_BASE_ADDR_ARM; + pm_t *pm_ocm_ram_base = (pm_t *)PM_OCM_RAM_BASE_ADDR_ARM; + pm_t *pm_iva2_base = (pm_t *)PM_IVA2_BASE_ADDR_ARM; + sms_t *sms_base = (sms_t *)OMAP34XX_SMS_BASE; + + /* Protection Module Register Target APE (PM_RT) */ + writel(UNLOCK_1, &pm_rt_ape_base->req_info_permission_1); + writel(UNLOCK_1, &pm_rt_ape_base->read_permission_0); + writel(UNLOCK_1, &pm_rt_ape_base->wirte_permission_0); + writel(UNLOCK_2, &pm_rt_ape_base->addr_match_1); + + writel(UNLOCK_3, &pm_gpmc_base->req_info_permission_0); + writel(UNLOCK_3, &pm_gpmc_base->read_permission_0); + writel(UNLOCK_3, &pm_gpmc_base->wirte_permission_0); + + writel(UNLOCK_3, &pm_ocm_ram_base->req_info_permission_0); + writel(UNLOCK_3, &pm_ocm_ram_base->read_permission_0); + writel(UNLOCK_3, &pm_ocm_ram_base->wirte_permission_0); + writel(UNLOCK_2, &pm_ocm_ram_base->addr_match_2); + + /* IVA Changes */ + writel(UNLOCK_3, &pm_iva2_base->req_info_permission_0); + writel(UNLOCK_3, &pm_iva2_base->read_permission_0); + writel(UNLOCK_3, &pm_iva2_base->wirte_permission_0); + + /* SDRC region 0 public */ + writel(UNLOCK_1, &sms_base->rg_att0); +} + +/****************************************************************************** + * Routine: secureworld_exit() + * Description: If chip is EMU and boot type is external + * configure secure registers and exit secure world + * general use. + *****************************************************************************/ +void secureworld_exit() +{ + unsigned long i; + + /* configrue non-secure access control register */ + __asm__ __volatile__("mrc p15, 0, %0, c1, c1, 2":"=r"(i)); + /* enabling co-processor CP10 and CP11 accesses in NS world */ + __asm__ __volatile__("orr %0, %0, #0xC00":"=r"(i)); + /* + * allow allocation of locked TLBs and L2 lines in NS world + * allow use of PLE registers in NS world also + */ + __asm__ __volatile__("orr %0, %0, #0x70000":"=r"(i)); + __asm__ __volatile__("mcr p15, 0, %0, c1, c1, 2":"=r"(i)); + + /* Enable ASA in ACR register */ + __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(i)); + __asm__ __volatile__("orr %0, %0, #0x10":"=r"(i)); + __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1":"=r"(i)); + + /* Exiting secure world */ + __asm__ __volatile__("mrc p15, 0, %0, c1, c1, 0":"=r"(i)); + __asm__ __volatile__("orr %0, %0, #0x31":"=r"(i)); + __asm__ __volatile__("mcr p15, 0, %0, c1, c1, 0":"=r"(i)); +} + +/****************************************************************************** + * Routine: setup_auxcr() + * Description: Write to AuxCR desired value using SMI. + * general use. + *****************************************************************************/ +void setup_auxcr() +{ + unsigned long i; + volatile unsigned int j; + /* Save r0, r12 and restore them after usage */ + __asm__ __volatile__("mov %0, r12":"=r"(j)); + __asm__ __volatile__("mov %0, r0":"=r"(i)); + + /* + * GP Device ROM code API usage here + * r12 = AUXCR Write function and r0 value + */ + __asm__ __volatile__("mov r12, #0x3"); + __asm__ __volatile__("mrc p15, 0, r0, c1, c0, 1"); + /* Enabling ASA */ + __asm__ __volatile__("orr r0, r0, #0x10"); + /* Enable L1NEON */ + __asm__ __volatile__("orr r0, r0, #1 << 5"); + /* SMI instruction to call ROM Code API */ + __asm__ __volatile__(".word 0xE1600070"); + __asm__ __volatile__("mov r0, %0":"=r"(i)); + __asm__ __volatile__("mov r12, %0":"=r"(j)); +} + +/****************************************************************************** + * Routine: try_unlock_sram() + * Description: If chip is GP/EMU(special) type, unlock the SRAM for + * general use. + *****************************************************************************/ +void try_unlock_memory() +{ + int mode; + int in_sdram = is_running_in_sdram(); + + /* + * if GP device unlock device SRAM for general use + * secure code breaks for Secure/Emulation device - HS/E/T + */ + mode = get_device_type(); + if (mode == GP_DEVICE) + secure_unlock_mem(); + + /* + * If device is EMU and boot is XIP external booting + * Unlock firewalls and disable L2 and put chip + * out of secure world + * + * Assuming memories are unlocked by the demon who put us in SDRAM + */ + if ((mode <= EMU_DEVICE) && (get_boot_type() == 0x1F) + && (!in_sdram)) { + secure_unlock_mem(); + secureworld_exit(); + } + + return; +} + +/****************************************************************************** + * Routine: s_init + * Description: Does early system init of muxing and clocks. + * - Called path is with SRAM stack. + *****************************************************************************/ +void s_init(void) +{ + int in_sdram = is_running_in_sdram(); + + watchdog_init(); + + try_unlock_memory(); + + /* + * Right now flushing at low MPU speed. + * Need to move after clock init + */ + v7_flush_dcache_all(get_device_type()); +#ifndef CONFIG_ICACHE_OFF + icache_enable(); +#endif + +#ifdef CONFIG_L2_OFF + l2cache_disable(); +#else + l2cache_enable(); +#endif + /* + * Writing to AuxCR in U-boot using SMI for GP DEV + * Currently SMI in Kernel on ES2 devices seems to have an issue + * Once that is resolved, we can postpone this config to kernel + */ + if (get_device_type() == GP_DEVICE) + setup_auxcr(); + + set_muxconf_regs(); + delay(100); + + prcm_init(); + + per_clocks_enable(); + + if (!in_sdram) + sdrc_init(); +} + +/****************************************************************************** + * Routine: wait_for_command_complete + * Description: Wait for posting to finish on watchdog + *****************************************************************************/ +void wait_for_command_complete(watchdog_t *wd_base) +{ + int pending = 1; + do { + pending = readl(&wd_base->wwps); + } while (pending); +} + +/****************************************************************************** + * Routine: watchdog_init + * Description: Shut down watch dogs + *****************************************************************************/ +void watchdog_init(void) +{ + watchdog_t *wd2_base = (watchdog_t *)WD2_BASE; + prcm_t *prcm_base = (prcm_t *)PRCM_BASE; + + /* + * There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is + * either taken care of by ROM (HS/EMU) or not accessible (GP). + * We need to take care of WD2-MPU or take a PRCM reset. WD3 + * should not be running and does not generate a PRCM reset. + */ + + sr32(&prcm_base->fclken_wkup, 5, 1, 1); + sr32(&prcm_base->iclken_wkup, 5, 1, 1); + wait_on_value(ST_WDT2, 0x20, &prcm_base->idlest_wkup, 5); + + writel(WD_UNLOCK1, &wd2_base->wspr); + wait_for_command_complete(wd2_base); + writel(WD_UNLOCK2, &wd2_base->wspr); +} + +/****************************************************************************** + * Routine: dram_init + * Description: sets uboots idea of sdram size + *****************************************************************************/ +int dram_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + unsigned int size0 = 0, size1 = 0; + u32 btype; + + btype = get_board_type(); + + display_board_info(btype); + + /* + * If a second bank of DDR is attached to CS1 this is + * where it can be started. Early init code will init + * memory on CS0. + */ + if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) { + do_sdrc_init(CS1, NOT_EARLY); + make_cs1_contiguous(); + } + + size0 = get_sdr_cs_size(CS0); + size1 = get_sdr_cs_size(CS1); + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = size0; + gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); + gd->bd->bi_dram[1].size = size1; + + return 0; +} + +/****************************************************************************** + * Dummy function to handle errors for EABI incompatibility + *****************************************************************************/ +void raise(void) +{ +} + +/****************************************************************************** + * Dummy function to handle errors for EABI incompatibility + *****************************************************************************/ +void abort(void) +{ +} + +#ifdef CONFIG_NAND_OMAP_GPMC +/****************************************************************************** + * OMAP3 specific command to switch between NAND HW and SW ecc + *****************************************************************************/ +static int do_switch_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + if (argc != 2) + goto usage; + if (strncmp(argv[1], "hw", 2) == 0) + omap_nand_switch_ecc(1); + else if (strncmp(argv[1], "sw", 2) == 0) + omap_nand_switch_ecc(0); + else + goto usage; + + return 0; + +usage: + printf ("Usage: nandecc %s\n", cmdtp->help); + return 1; +} + +U_BOOT_CMD( + nandecc, 2, 1, do_switch_ecc, + "nandecc - switch OMAP3 NAND ECC calculation algorithm\n", + "[hw/sw] - Switch between NAND hardware (hw) or software (sw) ecc algorithm\n" + ); + +#endif /* CONFIG_NAND_OMAP_GPMC */ diff --git a/cpu/arm_cortexa8/omap3/clock.c b/cpu/arm_cortexa8/omap3/clock.c new file mode 100644 index 0000000..8ac31be --- /dev/null +++ b/cpu/arm_cortexa8/omap3/clock.c @@ -0,0 +1,381 @@ +/* + * (C) Copyright 2008 + * Texas Instruments, <www.ti.com> + * + * Author : + * Manikandan Pillai <mani.pillai@ti.com> + * + * Derived from Beagle Board and OMAP3 SDP code by + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clocks.h> +#include <asm/arch/clocks_omap3.h> +#include <asm/arch/mem.h> +#include <asm/arch/sys_proto.h> +#include <environment.h> +#include <command.h> + +/****************************************************************************** + * get_sys_clk_speed() - determine reference oscillator speed + * based on known 32kHz clock and gptimer. + *****************************************************************************/ +u32 get_osc_clk_speed(void) +{ + u32 start, cstart, cend, cdiff, val; + prcm_t *prcm_base = (prcm_t *)PRCM_BASE; + prm_t *prm_base = (prm_t *)PRM_BASE; + gptimer_t *gpt1_base = (gptimer_t *)OMAP34XX_GPT1; + s32ktimer_t *s32k_base = (s32ktimer_t *)SYNC_32KTIMER_BASE; + + val = readl(&prm_base->clksrc_ctrl); + + /* If SYS_CLK is being divided by 2, remove for now */ + val = (val & (~SYSCLKDIV_2)) | SYSCLKDIV_1; + writel(val, &prm_base->clksrc_ctrl); + + /* enable timer2 */ + val = readl(&prcm_base->clksel_wkup) | CLKSEL_GPT1; + + /* select sys_clk for GPT1 */ + writel(val, &prcm_base->clksel_wkup); + + /* Enable I and F Clocks for GPT1 */ + val = readl(&prcm_base->iclken_wkup) | EN_GPT1 | EN_32KSYNC; + writel(val, &prcm_base->iclken_wkup); + val = readl(&prcm_base->fclken_wkup) | EN_GPT1; + writel(val, &prcm_base->fclken_wkup); + + writel(0, &gpt1_base->tldr); /* start counting at 0 */ + writel(GPT_EN, &gpt1_base->tclr); /* enable clock */ + + /* enable 32kHz source, determine sys_clk via gauging */ + + /* start time in 20 cycles */ + start = 20 + readl(&s32k_base->s32k_cr); + + /* dead loop till start time */ + while (readl(&s32k_base->s32k_cr) < start); + + /* get start sys_clk count */ + cstart = readl(&gpt1_base->tcrr); + + /* wait for 40 cycles */ + while (readl(&s32k_base->s32k_cr) < (start + 20)) ; + cend = readl(&gpt1_base->tcrr); /* get end sys_clk count */ + cdiff = cend - cstart; /* get elapsed ticks */ + + /* based on number of ticks assign speed */ + if (cdiff > 19000) + return S38_4M; + else if (cdiff > 15200) + return S26M; + else if (cdiff > 13000) + return S24M; + else if (cdiff > 9000) + return S19_2M; + else if (cdiff > 7600) + return S13M; + else + return S12M; +} + +/****************************************************************************** + * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on + * input oscillator clock frequency. + *****************************************************************************/ +void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel) +{ + switch(osc_clk) { + case S38_4M: + *sys_clkin_sel = 4; + break; + case S26M: + *sys_clkin_sel = 3; + break; + case S19_2M: + *sys_clkin_sel = 2; + break; + case S13M: + *sys_clkin_sel = 1; + break; + case S12M: + default: + *sys_clkin_sel = 0; + } +} + +/****************************************************************************** + * prcm_init() - inits clocks for PRCM as defined in clocks.h + * called from SRAM, or Flash (using temp SRAM stack). + *****************************************************************************/ +void prcm_init(void) +{ + void (*f_lock_pll) (u32, u32, u32, u32); + int xip_safe, p0, p1, p2, p3; + u32 osc_clk = 0, sys_clkin_sel; + u32 clk_index, sil_index; + prm_t *prm_base = (prm_t *)PRM_BASE; + prcm_t *prcm_base = (prcm_t *)PRCM_BASE; + dpll_param *dpll_param_p; + + f_lock_pll = (void *) ((u32) &_end_vect - (u32) &_start + + SRAM_VECT_CODE); + + xip_safe = is_running_in_sram(); + + /* + * Gauge the input clock speed and find out the sys_clkin_sel + * value corresponding to the input clock. + */ + osc_clk = get_osc_clk_speed(); + get_sys_clkin_sel(osc_clk, &sys_clkin_sel); + + /* set input crystal speed */ + sr32(&prm_base->clksel, 0, 3, sys_clkin_sel); + + /* If the input clock is greater than 19.2M always divide/2 */ + if (sys_clkin_sel > 2) { + /* input clock divider */ + sr32(&prm_base->clksrc_ctrl, 6, 2, 2); + clk_index = sys_clkin_sel / 2; + } else { + /* input clock divider */ + sr32(&prm_base->clksrc_ctrl, 6, 2, 1); + clk_index = sys_clkin_sel; + } + + /* + * The DPLL tables are defined according to sysclk value and + * silicon revision. The clk_index value will be used to get + * the values for that input sysclk from the DPLL param table + * and sil_index will get the values for that SysClk for the + * appropriate silicon rev. + */ + sil_index = get_cpu_rev() - 1; + + /* Unlock MPU DPLL (slows things down, and needed later) */ + sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOW_POWER_BYPASS); + wait_on_value(ST_MPU_CLK, 0, &prcm_base->idlest_pll_mpu, LDELAY); + + /* Getting the base address of Core DPLL param table */ + dpll_param_p = (dpll_param *) get_core_dpll_param(); + + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; + if (xip_safe) { + /* + * CORE DPLL + * sr32(CM_CLKSEL2_EMU) set override to work when asleep + */ + sr32(&prcm_base->clken_pll, 0, 3, PLL_FAST_RELOCK_BYPASS); + wait_on_value(ST_CORE_CLK, 0, &prcm_base->idlest_ckgen, + LDELAY); + + /* + * For OMAP3 ES1.0 Errata 1.50, default value directly doesn't + * work. write another value and then default value. + */ + + /* m3x2 */ + sr32(&prcm_base->clksel1_emu, 16, 5, CORE_M3X2 + 1); + /* m3x2 */ + sr32(&prcm_base->clksel1_emu, 16, 5, CORE_M3X2); + /* Set M2 */ + sr32(&prcm_base->clksel1_pll, 27, 2, dpll_param_p->m2); + /* Set M */ + sr32(&prcm_base->clksel1_pll, 16, 11, dpll_param_p->m); + /* Set N */ + sr32(&prcm_base->clksel1_pll, 8, 7, dpll_param_p->n); + /* 96M Src */ + sr32(&prcm_base->clksel1_pll, 6, 1, 0); + /* ssi */ + sr32(&prcm_base->clksel_core, 8, 4, CORE_SSI_DIV); + /* fsusb */ + sr32(&prcm_base->clksel_core, 4, 2, CORE_FUSB_DIV); + /* l4 */ + sr32(&prcm_base->clksel_core, 2, 2, CORE_L4_DIV); + /* l3 */ + sr32(&prcm_base->clksel_core, 0, 2, CORE_L3_DIV); + /* gfx */ + sr32(&prcm_base->clksel_gfx, 0, 3, GFX_DIV); + /* reset mgr */ + sr32(&prcm_base->clksel_wkup, 1, 2, WKUP_RSM); + /* FREQSEL */ + sr32(&prcm_base->clken_pll, 4, 4, dpll_param_p->fsel); + /* lock mode */ + sr32(&prcm_base->clken_pll, 0, 3, PLL_LOCK); + + wait_on_value(ST_CORE_CLK, 1, &prcm_base->idlest_ckgen, + LDELAY); + } else if (is_running_in_flash()) { + /* + * if running from flash, jump to small relocated code + * area in SRAM. + */ + p0 = readl(&prcm_base->clken_pll); + sr32(&p0, 0, 3, PLL_FAST_RELOCK_BYPASS); + sr32(&p0, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + + p1 = readl(&prcm_base->clksel1_pll); + sr32(&p1, 27, 2, dpll_param_p->m2); /* Set M2 */ + sr32(&p1, 16, 11, dpll_param_p->m); /* Set M */ + sr32(&p1, 8, 7, dpll_param_p->n); /* Set N */ + sr32(&p1, 6, 1, 0); /* set source for 96M */ + + p2 = readl(&prcm_base->clksel_core); + sr32(&p2, 8, 4, CORE_SSI_DIV); /* ssi */ + sr32(&p2, 4, 2, CORE_FUSB_DIV); /* fsusb */ + sr32(&p2, 2, 2, CORE_L4_DIV); /* l4 */ + sr32(&p2, 0, 2, CORE_L3_DIV); /* l3 */ + + p3 = (u32)&prcm_base->idlest_ckgen; + + (*f_lock_pll) (p0, p1, p2, p3); + } + + /* PER DPLL */ + sr32(&prcm_base->clken_pll, 16, 3, PLL_STOP); + wait_on_value(ST_PERIPH_CLK, 0, &prcm_base->idlest_ckgen, LDELAY); + + /* Getting the base address to PER DPLL param table */ + + /* Set N */ + dpll_param_p = (dpll_param *) get_per_dpll_param(); + + /* Moving it to the right sysclk base */ + dpll_param_p = dpll_param_p + clk_index; + + /* + * Errata 1.50 Workaround for OMAP3 ES1.0 only + * If using default divisors, write default divisor + 1 + * and then the actual divisor value + */ + sr32(&prcm_base->clksel1_emu, 24, 5, PER_M6X2 + 1); /* set M6 */ + sr32(&prcm_base->clksel1_emu, 24, 5, PER_M6X2); /* set M6 */ + sr32(&prcm_base->clksel_cam, 0, 5, PER_M5X2 + 1); /* set M5 */ + sr32(&prcm_base->clksel_cam, 0, 5, PER_M5X2); /* set M5 */ + sr32(&prcm_base->clksel_dss, 0, 5, PER_M4X2 + 1); /* set M4 */ + sr32(&prcm_base->clksel_dss, 0, 5, PER_M4X2); /* set M4 */ + sr32(&prcm_base->clksel_dss, 8, 5, PER_M3X2 + 1); /* set M3 */ + sr32(&prcm_base->clksel_dss, 8, 5, PER_M3X2); /* set M3 */ + sr32(&prcm_base->clksel3_pll, 0, 5, dpll_param_p->m2 + 1); /* set M2 */ + sr32(&prcm_base->clksel3_pll, 0, 5, dpll_param_p->m2); /* set M2 */ + /* Workaround end */ + + sr32(&prcm_base->clksel2_pll, 8, 11, dpll_param_p->m); /* set m */ + sr32(&prcm_base->clksel2_pll, 0, 7, dpll_param_p->n); /* set n */ + sr32(&prcm_base->clken_pll, 20, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(&prcm_base->clken_pll, 16, 3, PLL_LOCK); /* lock mode */ + wait_on_value(ST_PERIPH_CLK, 2, &prcm_base->idlest_ckgen, LDELAY); + + /* Getting the base address to MPU DPLL param table */ + dpll_param_p = (dpll_param *) get_mpu_dpll_param(); + + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; + + /* MPU DPLL (unlocked already) */ + + /* Set M2 */ + sr32(&prcm_base->clksel2_pll_mpu, 0, 5, dpll_param_p->m2); + /* Set M */ + sr32(&prcm_base->clksel1_pll_mpu, 8, 11, dpll_param_p->m); + /* Set N */ + sr32(&prcm_base->clksel1_pll_mpu, 0, 7, dpll_param_p->n); + /* FREQSEL */ + sr32(&prcm_base->clken_pll_mpu, 4, 4, dpll_param_p->fsel); + /* lock mode */ + sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOCK); + wait_on_value(ST_MPU_CLK, 1, &prcm_base->idlest_pll_mpu, LDELAY); + + /* Getting the base address to IVA DPLL param table */ + dpll_param_p = (dpll_param *) get_iva_dpll_param(); + + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; + + /* IVA DPLL (set to 12*20=240MHz) */ + sr32(&prcm_base->clken_pll_iva2, 0, 3, PLL_STOP); + wait_on_value(ST_IVA2_CLK, 0, &prcm_base->idlest_pll_iva2, LDELAY); + /* set M2 */ + sr32(&prcm_base->clksel2_pll_iva2, 0, 5, dpll_param_p->m2); + /* set M */ + sr32(&prcm_base->clksel1_pll_iva2, 8, 11, dpll_param_p->m); + /* set N */ + sr32(&prcm_base->clksel1_pll_iva2, 0, 7, dpll_param_p->n); + /* FREQSEL */ + sr32(&prcm_base->clken_pll_iva2, 4, 4, dpll_param_p->fsel); + /* lock mode */ + sr32(&prcm_base->clken_pll_iva2, 0, 3, PLL_LOCK); + wait_on_value(ST_IVA2_CLK, 1, &prcm_base->idlest_pll_iva2, LDELAY); + + /* Set up GPTimers to sys_clk source only */ + sr32(&prcm_base->clksel_per, 0, 8, 0xff); + sr32(&prcm_base->clksel_wkup, 0, 1, 1); + + sdelay(5000); +} + +/****************************************************************************** + * peripheral_enable() - Enable the clks & power for perifs (GPT2, UART1,...) + *****************************************************************************/ +void per_clocks_enable(void) +{ + prcm_t *prcm_base = (prcm_t *)PRCM_BASE; + + /* Enable GP2 timer. */ + sr32(&prcm_base->clksel_per, 0, 1, 0x1); /* GPT2 = sys clk */ + sr32(&prcm_base->iclken_per, 3, 1, 0x1); /* ICKen GPT2 */ + sr32(&prcm_base->fclken_per, 3, 1, 0x1); /* FCKen GPT2 */ + +#ifdef CONFIG_SYS_NS16550 + /* Enable UART1 clocks */ + sr32(&prcm_base->fclken1_core, 13, 1, 0x1); + sr32(&prcm_base->iclken1_core, 13, 1, 0x1); + + /* UART 3 Clocks */ + sr32(&prcm_base->fclken_per, 11, 1, 0x1); + sr32(&prcm_base->iclken_per, 11, 1, 0x1); +#endif +#ifdef CONFIG_DRIVER_OMAP34XX_I2C + /* Turn on all 3 I2C clocks */ + sr32(&prcm_base->fclken1_core, 15, 3, 0x7); + sr32(&prcm_base->iclken1_core, 15, 3, 0x7); /* I2C1,2,3 = on */ +#endif + /* Enable the ICLK for 32K Sync Timer as its used in udelay */ + sr32(&prcm_base->iclken_wkup, 2, 1, 0x1); + + sr32(&prcm_base->fclken_iva2, 0, 32, FCK_IVA2_ON); + sr32(&prcm_base->fclken1_core, 0, 32, FCK_CORE1_ON); + sr32(&prcm_base->iclken1_core, 0, 32, ICK_CORE1_ON); + sr32(&prcm_base->iclken2_core, 0, 32, ICK_CORE2_ON); + sr32(&prcm_base->fclken_wkup, 0, 32, FCK_WKUP_ON); + sr32(&prcm_base->iclken_wkup, 0, 32, ICK_WKUP_ON); + sr32(&prcm_base->fclken_dss, 0, 32, FCK_DSS_ON); + sr32(&prcm_base->iclken_dss, 0, 32, ICK_DSS_ON); + sr32(&prcm_base->fclken_cam, 0, 32, FCK_CAM_ON); + sr32(&prcm_base->iclken_cam, 0, 32, ICK_CAM_ON); + sr32(&prcm_base->fclken_per, 0, 32, FCK_PER_ON); + sr32(&prcm_base->iclken_per, 0, 32, ICK_PER_ON); + + sdelay(1000); +} diff --git a/cpu/arm_cortexa8/omap3/config.mk b/cpu/arm_cortexa8/omap3/config.mk new file mode 100644 index 0000000..fbb753e --- /dev/null +++ b/cpu/arm_cortexa8/omap3/config.mk @@ -0,0 +1,36 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <gj@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \ + -msoft-float + +# Make ARMv5 to allow more compilers to work, even though its v7a. +PLATFORM_CPPFLAGS += -march=armv5 +# ========================================================================= +# +# Supply options according to compiler version +# +# ========================================================================= +PLATFORM_CPPFLAGS +=$(call cc-option) +PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) +PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,\ + $(call cc-option,-malignment-traps,)) diff --git a/cpu/arm_cortexa8/omap3/interrupts.c b/cpu/arm_cortexa8/omap3/interrupts.c new file mode 100644 index 0000000..9e9817d --- /dev/null +++ b/cpu/arm_cortexa8/omap3/interrupts.c @@ -0,0 +1,297 @@ +/* + * (C) Copyright 2008 + * Texas Instruments + * + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Moahmmed Khasim <khasim@ti.com> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * Alex Zuepke <azu@sysgo.de> + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/proc-armv/ptrace.h> + +#define TIMER_LOAD_VAL 0 + +#ifdef CONFIG_USE_IRQ +/* enable IRQ interrupts */ +void enable_interrupts(void) +{ + unsigned long temp; + __asm__ __volatile__("mrs %0, cpsr\n" + "bic %0, %0, #0x80\n" "msr cpsr_c, %0":"=r"(temp) + ::"memory"); +} + +/* + * disable IRQ/FIQ interrupts + * returns true if interrupts had been enabled before we disabled them + */ +int disable_interrupts(void) +{ + unsigned long old, temp; + __asm__ __volatile__("mrs %0, cpsr\n" + "orr %1, %0, #0xc0\n" + "msr cpsr_c, %1":"=r"(old), "=r"(temp) + ::"memory"); + return (old & 0x80) == 0; +} +#else +void enable_interrupts(void) +{ + return; +} +int disable_interrupts(void) +{ + return 0; +} +#endif + +void bad_mode(void) +{ + panic("Resetting CPU ...\n"); + reset_cpu(0); +} + +void show_regs(struct pt_regs *regs) +{ + unsigned long flags; + const char *processor_modes[] = { + "USER_26", "FIQ_26", "IRQ_26", "SVC_26", + "UK4_26", "UK5_26", "UK6_26", "UK7_26", + "UK8_26", "UK9_26", "UK10_26", "UK11_26", + "UK12_26", "UK13_26", "UK14_26", "UK15_26", + "USER_32", "FIQ_32", "IRQ_32", "SVC_32", + "UK4_32", "UK5_32", "UK6_32", "ABT_32", + "UK8_32", "UK9_32", "UK10_32", "UND_32", + "UK12_32", "UK13_32", "UK14_32", "SYS_32", + }; + + flags = condition_codes(regs); + + printf("pc : [<%08lx>] lr : [<%08lx>]\n" + "sp : %08lx ip : %08lx fp : %08lx\n", + instruction_pointer(regs), + regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp); + printf("r10: %08lx r9 : %08lx r8 : %08lx\n", + regs->ARM_r10, regs->ARM_r9, regs->ARM_r8); + printf("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n", + regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4); + printf("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n", + regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0); + printf("Flags: %c%c%c%c", + flags & CC_N_BIT ? 'N' : 'n', + flags & CC_Z_BIT ? 'Z' : 'z', + flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v'); + printf(" IRQs %s FIQs %s Mode %s%s\n", + interrupts_enabled(regs) ? "on" : "off", + fast_interrupts_enabled(regs) ? "on" : "off", + processor_modes[processor_mode(regs)], + thumb_mode(regs) ? " (T)" : ""); +} + +void do_undefined_instruction(struct pt_regs *pt_regs) +{ + printf("undefined instruction\n"); + show_regs(pt_regs); + bad_mode(); +} + +void do_software_interrupt(struct pt_regs *pt_regs) +{ + printf("software interrupt\n"); + show_regs(pt_regs); + bad_mode(); +} + +void do_prefetch_abort(struct pt_regs *pt_regs) +{ + printf("prefetch abort\n"); + show_regs(pt_regs); + bad_mode(); +} + +void do_data_abort(struct pt_regs *pt_regs) +{ + printf("data abort\n"); + show_regs(pt_regs); + bad_mode(); +} + +void do_not_used(struct pt_regs *pt_regs) +{ + printf("not used\n"); + show_regs(pt_regs); + bad_mode(); +} + +void do_fiq(struct pt_regs *pt_regs) +{ + printf("fast interrupt request\n"); + show_regs(pt_regs); + bad_mode(); +} + +void do_irq(struct pt_regs *pt_regs) +{ + printf("interrupt request\n"); + show_regs(pt_regs); + bad_mode(); +} + + +static ulong timestamp; +static ulong lastinc; +static gptimer_t *timer_base = (gptimer_t *)CONFIG_SYS_TIMERBASE; + +/* nothing really to do with interrupts, just starts up a counter. */ +int interrupt_init(void) +{ + /* start the counter ticking up, reload value on overflow */ + writel(TIMER_LOAD_VAL, &timer_base->tldr); + /* enable timer */ + writel((CONFIG_SYS_PVT << 2) | TCLR_PRE | TCLR_AR | TCLR_ST, + &timer_base->tclr); + + reset_timer_masked(); /* init the timestamp and lastinc value */ + + return 0; +} + +/* + * timer without interrupts + */ +void reset_timer(void) +{ + reset_timer_masked(); +} + +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +void set_timer(ulong t) +{ + timestamp = t; +} + +/* delay x useconds AND perserve advance timstamp value */ +void udelay(unsigned long usec) +{ + ulong tmo, tmp; + + /* if "big" number, spread normalization to seconds */ + if (usec >= 1000) { + /* if "big" number, spread normalization to seconds */ + tmo = usec / 1000; + /* find number of "ticks" to wait to achieve target */ + tmo *= CONFIG_SYS_HZ; + tmo /= 1000; /* finish normalize. */ + } else {/* else small number, don't kill it prior to HZ multiply */ + tmo = usec * CONFIG_SYS_HZ; + tmo /= (1000 * 1000); + } + + tmp = get_timer(0); /* get current timestamp */ + /* if setting this forward will roll time stamp */ + if ((tmo + tmp + 1) < tmp) + /* reset "advancing" timestamp to 0, set lastinc value */ + reset_timer_masked(); + else + tmo += tmp; /* else, set advancing stamp wake up time */ + while (get_timer_masked() < tmo) /* loop till event */ + /*NOP*/; +} + +void reset_timer_masked(void) +{ + /* reset time, capture current incrementer value time */ + lastinc = readl(&timer_base->tcrr); + timestamp = 0; /* start "advancing" time stamp from 0 */ +} + +ulong get_timer_masked(void) +{ + ulong now = readl(&timer_base->tcrr); /* current tick value */ + + if (now >= lastinc) /* normal mode (non roll) */ + /* move stamp fordward with absoulte diff ticks */ + timestamp += (now - lastinc); + else /* we have rollover of incrementer */ + timestamp += (0xFFFFFFFF - lastinc) + now; + lastinc = now; + return timestamp; +} + +/* waits specified delay value and resets timestamp */ +void udelay_masked(unsigned long usec) +{ + ulong tmo; + ulong endtime; + signed long diff; + + /* if "big" number, spread normalization to seconds */ + if (usec >= 1000) { + /* start to normalize for usec to ticks per sec */ + tmo = usec / 1000; + /* find number of "ticks" to wait to achieve target */ + tmo *= CONFIG_SYS_HZ; + tmo /= 1000; /* finish normalize. */ + } else { /* else small number, */ + /* don't kill it prior to HZ multiply */ + tmo = usec * CONFIG_SYS_HZ; + tmo /= (1000 * 1000); + } + endtime = get_timer_masked() + tmo; + + do { + ulong now = get_timer_masked(); + diff = endtime - now; + } while (diff >= 0); +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + ulong tbclk; + tbclk = CONFIG_SYS_HZ; + return tbclk; +} diff --git a/cpu/arm_cortexa8/omap3/lowlevel_init.S b/cpu/arm_cortexa8/omap3/lowlevel_init.S new file mode 100644 index 0000000..cf1f927 --- /dev/null +++ b/cpu/arm_cortexa8/omap3/lowlevel_init.S @@ -0,0 +1,361 @@ +/* + * Board specific setup info + * + * (C) Copyright 2008 + * Texas Instruments, <www.ti.com> + * + * Initial Code by: + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/arch/mem.h> +#include <asm/arch/clocks_omap3.h> + +_TEXT_BASE: + .word TEXT_BASE /* sdram load addr from config.mk */ + +#if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_NAND_BOOT) +/************************************************************************** + * cpy_clk_code: relocates clock code into SRAM where its safer to execute + * R1 = SRAM destination address. + *************************************************************************/ +.global cpy_clk_code + cpy_clk_code: + /* Copy DPLL code into SRAM */ + adr r0, go_to_speed /* get addr of clock setting code */ + mov r2, #384 /* r2 size to copy (div by 32 bytes) */ + mov r1, r1 /* r1 <- dest address (passed in) */ + add r2, r2, r0 /* r2 <- source end address */ +next2: + ldmia r0!, {r3 - r10} /* copy from source address [r0] */ + stmia r1!, {r3 - r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ + bne next2 + mov pc, lr /* back to caller */ + +/* *************************************************************************** + * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed + * -executed from SRAM. + * R0 = CM_CLKEN_PLL-bypass value + * R1 = CM_CLKSEL1_PLL-m, n, and divider values + * R2 = CM_CLKSEL_CORE-divider values + * R3 = CM_IDLEST_CKGEN - addr dpll lock wait + * + * Note: If core unlocks/relocks and SDRAM is running fast already it gets + * confused. A reset of the controller gets it back. Taking away its + * L3 when its not in self refresh seems bad for it. Normally, this + * code runs from flash before SDR is init so that should be ok. + ****************************************************************************/ +.global go_to_speed + go_to_speed: + stmfd sp!, {r4 - r6} + + /* move into fast relock bypass */ + ldr r4, pll_ctl_add + str r0, [r4] +wait1: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + beq wait1 /* if lock, loop */ + + /* set new dpll dividers _after_ in bypass */ + ldr r5, pll_div_add1 + str r1, [r5] /* set m, n, m2 */ + ldr r5, pll_div_add2 + str r2, [r5] /* set l3/l4/.. dividers*/ + ldr r5, pll_div_add3 /* wkup */ + ldr r2, pll_div_val3 /* rsm val */ + str r2, [r5] + ldr r5, pll_div_add4 /* gfx */ + ldr r2, pll_div_val4 + str r2, [r5] + ldr r5, pll_div_add5 /* emu */ + ldr r2, pll_div_val5 + str r2, [r5] + + /* now prepare GPMC (flash) for new dpll speed */ + /* flash needs to be stable when we jump back to it */ + ldr r5, flash_cfg3_addr + ldr r2, flash_cfg3_val + str r2, [r5] + ldr r5, flash_cfg4_addr + ldr r2, flash_cfg4_val + str r2, [r5] + ldr r5, flash_cfg5_addr + ldr r2, flash_cfg5_val + str r2, [r5] + ldr r5, flash_cfg1_addr + ldr r2, [r5] + orr r2, r2, #0x3 /* up gpmc divider */ + str r2, [r5] + + /* lock DPLL3 and wait a bit */ + orr r0, r0, #0x7 /* set up for lock mode */ + str r0, [r4] /* lock */ + nop /* ARM slow at this point working at sys_clk */ + nop + nop + nop +wait2: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + bne wait2 /* if lock, loop */ + nop + nop + nop + nop + ldmfd sp!, {r4 - r6} + mov pc, lr /* back to caller, locked */ + +_go_to_speed: .word go_to_speed + +/* these constants need to be close for PIC code */ +/* The Nor has to be in the Flash Base CS0 for this condition to happen */ +flash_cfg1_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG1) +flash_cfg3_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG3) +flash_cfg3_val: + .word STNOR_GPMC_CONFIG3 +flash_cfg4_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG4) +flash_cfg4_val: + .word STNOR_GPMC_CONFIG4 +flash_cfg5_val: + .word STNOR_GPMC_CONFIG5 +flash_cfg5_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG5) +pll_ctl_add: + .word CM_CLKEN_PLL +pll_div_add1: + .word CM_CLKSEL1_PLL +pll_div_add2: + .word CM_CLKSEL_CORE +pll_div_add3: + .word CM_CLKSEL_WKUP +pll_div_val3: + .word (WKUP_RSM << 1) +pll_div_add4: + .word CM_CLKSEL_GFX +pll_div_val4: + .word (GFX_DIV << 0) +pll_div_add5: + .word CM_CLKSEL1_EMU +pll_div_val5: + .word CLSEL1_EMU_VAL + +#endif + +.globl lowlevel_init +lowlevel_init: + ldr sp, SRAM_STACK + str ip, [sp] /* stash old link register */ + mov ip, lr /* save link reg across call */ + bl s_init /* go setup pll, mux, memory */ + ldr ip, [sp] /* restore save ip */ + mov lr, ip /* restore link reg */ + + /* back to arch calling code */ + mov pc, lr + + /* the literal pools origin */ + .ltorg + +REG_CONTROL_STATUS: + .word CONTROL_STATUS +SRAM_STACK: + .word LOW_LEVEL_SRAM_STACK + +/* DPLL(1-4) PARAM TABLES */ + +/* + * Each of the tables has M, N, FREQSEL, M2 values defined for nominal + * OPP (1.2V). The fields are defined according to dpll_param struct (clock.c). + * The values are defined for all possible sysclk and for ES1 and ES2. + */ + +mpu_dpll_param: +/* 12MHz */ +/* ES1 */ +.word MPU_M_12_ES1, MPU_N_12_ES1, MPU_FSEL_12_ES1, MPU_M2_12_ES1 +/* ES2 */ +.word MPU_M_12_ES2, MPU_N_12_ES2, MPU_FSEL_12_ES2, MPU_M2_ES2 +/* 3410 */ +.word MPU_M_12, MPU_N_12, MPU_FSEL_12, MPU_M2_12 + +/* 13MHz */ +/* ES1 */ +.word MPU_M_13_ES1, MPU_N_13_ES1, MPU_FSEL_13_ES1, MPU_M2_13_ES1 +/* ES2 */ +.word MPU_M_13_ES2, MPU_N_13_ES2, MPU_FSEL_13_ES2, MPU_M2_13_ES2 +/* 3410 */ +.word MPU_M_13, MPU_N_13, MPU_FSEL_13, MPU_M2_13 + +/* 19.2MHz */ +/* ES1 */ +.word MPU_M_19P2_ES1, MPU_N_19P2_ES1, MPU_FSEL_19P2_ES1, MPU_M2_19P2_ES1 +/* ES2 */ +.word MPU_M_19P2_ES2, MPU_N_19P2_ES2, MPU_FSEL_19P2_ES2, MPU_M2_19P2_ES2 +/* 3410 */ +.word MPU_M_19P2, MPU_N_19P2, MPU_FSEL_19P2, MPU_M2_19P2 + +/* 26MHz */ +/* ES1 */ +.word MPU_M_26_ES1, MPU_N_26_ES1, MPU_FSEL_26_ES1, MPU_M2_26_ES1 +/* ES2 */ +.word MPU_M_26_ES2, MPU_N_26_ES2, MPU_FSEL_26_ES2, MPU_M2_26_ES2 +/* 3410 */ +.word MPU_M_26, MPU_N_26, MPU_FSEL_26, MPU_M2_26 + +/* 38.4MHz */ +/* ES1 */ +.word MPU_M_38P4_ES1, MPU_N_38P4_ES1, MPU_FSEL_38P4_ES1, MPU_M2_38P4_ES1 +/* ES2 */ +.word MPU_M_38P4_ES2, MPU_N_38P4_ES2, MPU_FSEL_38P4_ES2, MPU_M2_38P4_ES2 +/* 3410 */ +.word MPU_M_38P4, MPU_N_38P4, MPU_FSEL_38P4, MPU_M2_38P4 + + +.globl get_mpu_dpll_param +get_mpu_dpll_param: + adr r0, mpu_dpll_param + mov pc, lr + +iva_dpll_param: +/* 12MHz */ +/* ES1 */ +.word IVA_M_12_ES1, IVA_N_12_ES1, IVA_FSEL_12_ES1, IVA_M2_12_ES1 +/* ES2 */ +.word IVA_M_12_ES2, IVA_N_12_ES2, IVA_FSEL_12_ES2, IVA_M2_12_ES2 +/* 3410 */ +.word IVA_M_12, IVA_N_12, IVA_FSEL_12, IVA_M2_12 + +/* 13MHz */ +/* ES1 */ +.word IVA_M_13_ES1, IVA_N_13_ES1, IVA_FSEL_13_ES1, IVA_M2_13_ES1 +/* ES2 */ +.word IVA_M_13_ES2, IVA_N_13_ES2, IVA_FSEL_13_ES2, IVA_M2_13_ES2 +/* 3410 */ +.word IVA_M_13, IVA_N_13, IVA_FSEL_13, IVA_M2_13 + +/* 19.2MHz */ +/* ES1 */ +.word IVA_M_19P2_ES1, IVA_N_19P2_ES1, IVA_FSEL_19P2_ES1, IVA_M2_19P2_ES1 +/* ES2 */ +.word IVA_M_19P2_ES2, IVA_N_19P2_ES2, IVA_FSEL_19P2_ES2, IVA_M2_19P2_ES2 +/* 3410 */ +.word IVA_M_19P2, IVA_N_19P2, IVA_FSEL_19P2, IVA_M2_19P2 + +/* 26MHz */ +/* ES1 */ +.word IVA_M_26_ES1, IVA_N_26_ES1, IVA_FSEL_26_ES1, IVA_M2_26_ES1 +/* ES2 */ +.word IVA_M_26_ES2, IVA_N_26_ES2, IVA_FSEL_26_ES2, IVA_M2_26_ES2 +/* 3410 */ +.word IVA_M_26, IVA_N_26, IVA_FSEL_26, IVA_M2_26 + +/* 38.4MHz */ +/* ES1 */ +.word IVA_M_38P4_ES1, IVA_N_38P4_ES1, IVA_FSEL_38P4_ES1, IVA_M2_38P4_ES1 +/* ES2 */ +.word IVA_M_38P4_ES2, IVA_N_38P4_ES2, IVA_FSEL_38P4_ES2, IVA_M2_38P4_ES2 +/* 3410 */ +.word IVA_M_38P4, IVA_N_38P4, IVA_FSEL_38P4, IVA_M2_38P4 + + +.globl get_iva_dpll_param +get_iva_dpll_param: + adr r0, iva_dpll_param + mov pc, lr + +/* Core DPLL targets for L3 at 166 & L133 */ +core_dpll_param: +/* 12MHz */ +/* ES1 */ +.word CORE_M_12_ES1, CORE_N_12_ES1, CORE_FSL_12_ES1, CORE_M2_12_ES1 +/* ES2 */ +.word CORE_M_12, CORE_N_12, CORE_FSEL_12, CORE_M2_12 +/* 3410 */ +.word CORE_M_12, CORE_N_12, CORE_FSEL_12, CORE_M2_12 + +/* 13MHz */ +/* ES1 */ +.word CORE_M_13_ES1, CORE_N_13_ES1, CORE_FSL_13_ES1, CORE_M2_13_ES1 +/* ES2 */ +.word CORE_M_13, CORE_N_13, CORE_FSEL_13, CORE_M2_13 +/* 3410 */ +.word CORE_M_13, CORE_N_13, CORE_FSEL_13, CORE_M2_13 + +/* 19.2MHz */ +/* ES1 */ +.word CORE_M_19P2_ES1, CORE_N_19P2_ES1, CORE_FSL_19P2_ES1, CORE_M2_19P2_ES1 +/* ES2 */ +.word CORE_M_19P2, CORE_N_19P2, CORE_FSEL_19P2, CORE_M2_19P2 +/* 3410 */ +.word CORE_M_19P2, CORE_N_19P2, CORE_FSEL_19P2, CORE_M2_19P2 + +/* 26MHz */ +/* ES1 */ +.word CORE_M_26_ES1, CORE_N_26_ES1, CORE_FSL_26_ES1, CORE_M2_26_ES1 +/* ES2 */ +.word CORE_M_26, CORE_N_26, CORE_FSEL_26, CORE_M2_26 +/* 3410 */ +.word CORE_M_26, CORE_N_26, CORE_FSEL_26, CORE_M2_26 + +/* 38.4MHz */ +/* ES1 */ +.word CORE_M_38P4_ES1, CORE_N_38P4_ES1, CORE_FSL_38P4_ES1, CORE_M2_38P4_ES1 +/* ES2 */ +.word CORE_M_38P4, CORE_N_38P4, CORE_FSEL_38P4, CORE_M2_38P4 +/* 3410 */ +.word CORE_M_38P4, CORE_N_38P4, CORE_FSEL_38P4, CORE_M2_38P4 + +.globl get_core_dpll_param +get_core_dpll_param: + adr r0, core_dpll_param + mov pc, lr + +/* PER DPLL values are same for both ES1 and ES2 */ +per_dpll_param: +/* 12MHz */ +.word PER_M_12, PER_N_12, PER_FSEL_12, PER_M2_12 + +/* 13MHz */ +.word PER_M_13, PER_N_13, PER_FSEL_13, PER_M2_13 + +/* 19.2MHz */ +.word PER_M_19P2, PER_N_19P2, PER_FSEL_19P2, PER_M2_19P2 + +/* 26MHz */ +.word PER_M_26, PER_N_26, PER_FSEL_26, PER_M2_26 + +/* 38.4MHz */ +.word PER_M_38P4, PER_N_38P4, PER_FSEL_38P4, PER_M2_38P4 + +.globl get_per_dpll_param +get_per_dpll_param: + adr r0, per_dpll_param + mov pc, lr diff --git a/cpu/arm_cortexa8/omap3/mem.c b/cpu/arm_cortexa8/omap3/mem.c new file mode 100644 index 0000000..3cc22c4 --- /dev/null +++ b/cpu/arm_cortexa8/omap3/mem.c @@ -0,0 +1,284 @@ +/* + * (C) Copyright 2008 + * Texas Instruments, <www.ti.com> + * + * Author : + * Manikandan Pillai <mani.pillai@ti.com> + * + * Initial Code from: + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mem.h> +#include <asm/arch/sys_proto.h> +#include <command.h> + +/* + * Only One NAND allowed on board at a time. + * The GPMC CS Base for the same + */ +unsigned int boot_flash_base; +unsigned int boot_flash_off; +unsigned int boot_flash_sec; +unsigned int boot_flash_type; +volatile unsigned int boot_flash_env_addr; + +#if defined(CONFIG_CMD_NAND) +static u32 gpmc_m_nand[GPMC_MAX_REG] = { + M_NAND_GPMC_CONFIG1, + M_NAND_GPMC_CONFIG2, + M_NAND_GPMC_CONFIG3, + M_NAND_GPMC_CONFIG4, + M_NAND_GPMC_CONFIG5, + M_NAND_GPMC_CONFIG6, 0 +}; + +gpmc_csx_t *nand_cs_base; +gpmc_t *gpmc_cfg_base; + +#if defined(CONFIG_ENV_IS_IN_NAND) +#define GPMC_CS 0 +#else +#define GPMC_CS 1 +#endif + +#endif + +#if defined(CONFIG_CMD_ONENAND) +static u32 gpmc_onenand[GPMC_MAX_REG] = { + ONENAND_GPMC_CONFIG1, + ONENAND_GPMC_CONFIG2, + ONENAND_GPMC_CONFIG3, + ONENAND_GPMC_CONFIG4, + ONENAND_GPMC_CONFIG5, + ONENAND_GPMC_CONFIG6, 0 +}; + +gpmc_csx_t *onenand_cs_base; + +#if defined(CONFIG_ENV_IS_IN_ONENAND) +#define GPMC_CS 0 +#else +#define GPMC_CS 1 +#endif + +#endif + +static sdrc_t *sdrc_base = (sdrc_t *)OMAP34XX_SDRC_BASE; + +/************************************************************************** + * make_cs1_contiguous() - for es2 and above remap cs1 behind cs0 to allow + * command line mem=xyz use all memory with out discontinuous support + * compiled in. Could do it at the ATAG, but there really is two banks... + * Called as part of 2nd phase DDR init. + **************************************************************************/ +void make_cs1_contiguous(void) +{ + u32 size, a_add_low, a_add_high; + + size = get_sdr_cs_size(CS0); + size /= SZ_32M; /* find size to offset CS1 */ + a_add_high = (size & 3) << 8; /* set up low field */ + a_add_low = (size & 0x3C) >> 2; /* set up high field */ + writel((a_add_high | a_add_low), &sdrc_base->cs_cfg); + +} + +/******************************************************** + * mem_ok() - test used to see if timings are correct + * for a part. Helps in guessing which part + * we are currently using. + *******************************************************/ +u32 mem_ok(u32 cs) +{ + u32 val1, val2, addr; + u32 pattern = 0x12345678; + + addr = OMAP34XX_SDRC_CS0 + get_sdr_cs_offset(cs); + + writel(0x0, addr + 0x400); /* clear pos A */ + writel(pattern, addr); /* pattern to pos B */ + writel(0x0, addr + 4); /* remove pattern off the bus */ + val1 = readl(addr + 0x400); /* get pos A value */ + val2 = readl(addr); /* get val2 */ + + if ((val1 != 0) || (val2 != pattern)) /* see if pos A val changed */ + return 0; + else + return 1; +} + +/******************************************************** + * sdrc_init() - init the sdrc chip selects CS0 and CS1 + * - early init routines, called from flash or + * SRAM. + *******************************************************/ +void sdrc_init(void) +{ + /* only init up first bank here */ + do_sdrc_init(CS0, EARLY_INIT); +} + +/************************************************************************* + * do_sdrc_init(): initialize the SDRAM for use. + * -code sets up SDRAM basic SDRC timings for CS0 + * -optimal settings can be placed here, or redone after i2c + * inspection of board info + * + * - code called once in C-Stack only context for CS0 and a possible 2nd + * time depending on memory configuration from stack+global context + **************************************************************************/ + +void do_sdrc_init(u32 cs, u32 early) +{ + sdrc_actim_t *sdrc_actim_base; + + if(cs) + sdrc_actim_base = (sdrc_actim_t *)SDRC_ACTIM_CTRL1_BASE; + else + sdrc_actim_base = (sdrc_actim_t *)SDRC_ACTIM_CTRL0_BASE; + + if (early) { + /* reset sdrc controller */ + writel(SOFTRESET, &sdrc_base->sysconfig); + wait_on_value(RESETDONE, RESETDONE, &sdrc_base->status, + 12000000); + writel(0, &sdrc_base->sysconfig); + + /* setup sdrc to ball mux */ + writel(SDP_SDRC_SHARING, &sdrc_base->sharing); + + /* Disable Power Down of CKE cuz of 1 CKE on combo part */ + writel(SRFRONRESET | PAGEPOLICY_HIGH, &sdrc_base->power); + + writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl); + sdelay(0x20000); + } + + writel(RASWIDTH_13BITS | CASWIDTH_10BITS | ADDRMUXLEGACY | + RAMSIZE_128 | BANKALLOCATION | B32NOT16 | B32NOT16 | + DEEPPD | DDR_SDRAM, &sdrc_base->cs[cs].mcfg); + writel(ARCV | ARE_ARCV_1, &sdrc_base->cs[cs].rfr_ctrl); + writel(V_ACTIMA_165, &sdrc_actim_base->ctrla); + writel(V_ACTIMB_165, &sdrc_actim_base->ctrlb); + + writel(CMD_NOP, &sdrc_base ->cs[cs].manual); + writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual); + writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); + writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); + + /* + * CAS latency 3, Write Burst = Read Burst, Serial Mode, + * Burst length = 4 + */ + writel(CASL3 | BURSTLENGTH4, &sdrc_base->cs[cs].mr); + + if (!mem_ok(cs)) + writel(0, &sdrc_base->cs[cs].mcfg); +} + +void enable_gpmc_config(u32 *gpmc_config, gpmc_csx_t *gpmc_cs_base, u32 base, + u32 size) +{ + writel(0, &gpmc_cs_base->config7); + sdelay(1000); + /* Delay for settling */ + writel(gpmc_config[0], &gpmc_cs_base->config1); + writel(gpmc_config[1], &gpmc_cs_base->config2); + writel(gpmc_config[2], &gpmc_cs_base->config3); + writel(gpmc_config[3], &gpmc_cs_base->config4); + writel(gpmc_config[4], &gpmc_cs_base->config5); + writel(gpmc_config[5], &gpmc_cs_base->config6); + /* Enable the config */ + writel((((size & 0xF) << 8) | ((base >> 24) & 0x3F) | + (1 << 6)), &gpmc_cs_base->config7); + sdelay(2000); +} + +/***************************************************** + * gpmc_init(): init gpmc bus + * Init GPMC for x16, MuxMode (SDRAM in x32). + * This code can only be executed from SRAM or SDRAM. + *****************************************************/ +void gpmc_init(void) +{ + /* putting a blanket check on GPMC based on ZeBu for now */ + u32 *gpmc_config = NULL; + gpmc_t *gpmc_base = (gpmc_t *)GPMC_BASE; + gpmc_csx_t *gpmc_cs_base = (gpmc_csx_t *)GPMC_CONFIG_CS0_BASE; + u32 base = 0; + u32 size = 0; + u32 f_off = CONFIG_SYS_MONITOR_LEN; + u32 f_sec = 0; + u32 config = 0; + + /* global settings */ + writel(0, &gpmc_base->irqenable); /* isr's sources masked */ + writel(0, &gpmc_base->timeout_control);/* timeout disable */ + + config = readl(&gpmc_base->config); + config &= (~0xf00); + writel(config, &gpmc_base->config); + + /* + * Disable the GPMC0 config set by ROM code + * It conflicts with our MPDB (both at 0x08000000) + */ + writel(0, &gpmc_cs_base->config7); + sdelay(1000); + +#if defined(CONFIG_CMD_NAND) /* CS 0 */ + gpmc_config = gpmc_m_nand; + gpmc_cfg_base = gpmc_base; + nand_cs_base = (gpmc_csx_t *)(GPMC_CONFIG_CS0_BASE + + (GPMC_CS * GPMC_CONFIG_WIDTH)); + base = PISMO1_NAND_BASE; + size = PISMO1_NAND_SIZE; + enable_gpmc_config(gpmc_config, nand_cs_base, base, size); +#if defined(CONFIG_ENV_IS_IN_NAND) + f_off = SMNAND_ENV_OFFSET; + f_sec = SZ_128K; + /* env setup */ + boot_flash_base = base; + boot_flash_off = f_off; + boot_flash_sec = f_sec; + boot_flash_env_addr = f_off; +#endif +#endif + +#if defined(CONFIG_CMD_ONENAND) + gpmc_config = gpmc_onenand; + onenand_cs_base = (gpmc_csx_t *)(GPMC_CONFIG_CS0_BASE + + (GPMC_CS * GPMC_CONFIG_WIDTH)); + base = PISMO1_ONEN_BASE; + size = PISMO1_ONEN_SIZE; + enable_gpmc_config(gpmc_config, onenand_cs_base, base, size); +#if defined(CONFIG_ENV_IS_IN_ONENAND) + f_off = ONENAND_ENV_OFFSET; + f_sec = SZ_128K; + /* env setup */ + boot_flash_base = base; + boot_flash_off = f_off; + boot_flash_sec = f_sec; + boot_flash_env_addr = f_off; +#endif +#endif +} diff --git a/cpu/arm_cortexa8/omap3/sys_info.c b/cpu/arm_cortexa8/omap3/sys_info.c new file mode 100644 index 0000000..ab012b6 --- /dev/null +++ b/cpu/arm_cortexa8/omap3/sys_info.c @@ -0,0 +1,254 @@ +/* + * (C) Copyright 2008 + * Texas Instruments, <www.ti.com> + * + * Author : + * Manikandan Pillai <mani.pillai@ti.com> + * + * Derived from Beagle Board and 3430 SDP code by + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mem.h> /* get mem tables */ +#include <asm/arch/sys_proto.h> +#include <i2c.h> + +extern omap3_sysinfo sysinfo; +static gpmc_csx_t *gpmc_cs_base = (gpmc_csx_t *)GPMC_CONFIG_CS0_BASE; +static sdrc_t *sdrc_base = (sdrc_t *)OMAP34XX_SDRC_BASE; +static ctrl_t *ctrl_base = (ctrl_t *)OMAP34XX_CTRL_BASE; + +/****************************************** + * get_cpu_rev(void) - extract version info + ******************************************/ +u32 get_cpu_rev(void) +{ + u32 cpuid = 0; + + /* + * On ES1.0 the IDCODE register is not exposed on L4 + * so using CPU ID to differentiate + * between ES2.0 and ES1.0. + */ + __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r"(cpuid)); + if ((cpuid & 0xf) == 0x0) + return CPU_3430_ES1; + else + return CPU_3430_ES2; + +} + +/**************************************************** + * is_mem_sdr() - return 1 if mem type in use is SDR + ****************************************************/ +u32 is_mem_sdr(void) +{ + if (readl(&sdrc_base->cs[CS0].mr) == SDP_SDRC_MR_0_SDR) + return 1; + return 0; +} + +/*********************************************************************** + * get_cs0_size() - get size of chip select 0/1 + ************************************************************************/ +u32 get_sdr_cs_size(u32 cs) +{ + u32 size; + + /* get ram size field */ + size = readl(&sdrc_base->cs[cs].mcfg) >> 8; + size &= 0x3FF; /* remove unwanted bits */ + size *= SZ_2M; /* find size in MB */ + return size; +} + +/*********************************************************************** + * get_sdr_cs_offset() - get offset of cs from cs0 start + ************************************************************************/ +u32 get_sdr_cs_offset(u32 cs) +{ + u32 offset; + + if (!cs) + return 0; + + offset = readl(&sdrc_base->cs_cfg); + offset = (offset & 15) << 27 | (offset & 0x30) >> 17; + + return offset; +} + +/*********************************************************************** + * get_board_type() - get board type based on current production stats. + * - NOTE-1-: 2 I2C EEPROMs will someday be populated with proper info. + * when they are available we can get info from there. This should + * be correct of all known boards up until today. + * - NOTE-2- EEPROMs are populated but they are updated very slowly. To + * avoid waiting on them we will use ES version of the chip to get info. + * A later version of the FPGA migth solve their speed issue. + ************************************************************************/ +u32 get_board_type(void) +{ + if (get_cpu_rev() == CPU_3430_ES2) + return sysinfo.board_type_v2; + else + return sysinfo.board_type_v1; +} + +/*************************************************************************** + * get_gpmc0_base() - Return current address hardware will be + * fetching from. The below effectively gives what is correct, its a bit + * mis-leading compared to the TRM. For the most general case the mask + * needs to be also taken into account this does work in practice. + * - for u-boot we currently map: + * -- 0 to nothing, + * -- 4 to flash + * -- 8 to enent + * -- c to wifi + ****************************************************************************/ +u32 get_gpmc0_base(void) +{ + u32 b; + + b = readl(&gpmc_cs_base->config7); + b &= 0x1F; /* keep base [5:0] */ + b = b << 24; /* ret 0x0b000000 */ + return b; +} + +/******************************************************************* + * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand) + *******************************************************************/ +u32 get_gpmc0_width(void) +{ + return WIDTH_16BIT; +} + +/************************************************************************* + * get_board_rev() - setup to pass kernel board revision information + * returns:(bit[0-3] sub version, higher bit[7-4] is higher version) + *************************************************************************/ +u32 get_board_rev(void) +{ + return 0x20; +} + +/********************************************************************* + * display_board_info() - print banner with board info. + *********************************************************************/ +void display_board_info(u32 btype) +{ + char *mem_s, *sec_s; + + if (is_mem_sdr()) + mem_s = "mSDR"; + else + mem_s = "LPDDR"; + + switch (get_device_type()) { + case TST_DEVICE: + sec_s = "TST"; + break; + case EMU_DEVICE: + sec_s = "EMU"; + break; + case HS_DEVICE: + sec_s = "HS"; + break; + case GP_DEVICE: + sec_s = "GP"; + break; + default: + sec_s = "?"; + } + + printf("OMAP%s-%s rev %d, CPU-OPP2 L3-165MHz\n", sysinfo.cpu_string, + sec_s, get_cpu_rev()); + printf("%s + %s/%s\n", sysinfo.board_string, + mem_s, sysinfo.nand_string); + +} + +/******************************************************** + * get_base(); get upper addr of current execution + *******************************************************/ +u32 get_base(void) +{ + u32 val; + + __asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory"); + val &= 0xF0000000; + val >>= 28; + return val; +} + +/******************************************************** + * is_running_in_flash() - tell if currently running in + * FLASH. + *******************************************************/ +u32 is_running_in_flash(void) +{ + if (get_base() < 4) + return 1; /* in FLASH */ + + return 0; /* running in SRAM or SDRAM */ +} + +/******************************************************** + * is_running_in_sram() - tell if currently running in + * SRAM. + *******************************************************/ +u32 is_running_in_sram(void) +{ + if (get_base() == 4) + return 1; /* in SRAM */ + + return 0; /* running in FLASH or SDRAM */ +} + +/******************************************************** + * is_running_in_sdram() - tell if currently running in + * SDRAM. + *******************************************************/ +u32 is_running_in_sdram(void) +{ + if (get_base() > 4) + return 1; /* in SDRAM */ + + return 0; /* running in SRAM or FLASH */ +} + +/*************************************************************** + * get_boot_type() - Is this an XIP type device or a stream one + * bits 4-0 specify type. Bit 5 says mem/perif + ***************************************************************/ +u32 get_boot_type(void) +{ + return (readl(&ctrl_base->status) & SYSBOOT_MASK); +} + +/************************************************************* + * get_device_type(): tell if GP/HS/EMU/TST + *************************************************************/ +u32 get_device_type(void) +{ + return ((readl(&ctrl_base->status) & (DEVICE_MASK)) >> 8); +} diff --git a/cpu/arm_cortexa8/omap3/syslib.c b/cpu/arm_cortexa8/omap3/syslib.c new file mode 100644 index 0000000..9ced495 --- /dev/null +++ b/cpu/arm_cortexa8/omap3/syslib.c @@ -0,0 +1,72 @@ +/* + * (C) Copyright 2008 + * Texas Instruments, <www.ti.com> + * + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mem.h> +#include <asm/arch/clocks.h> +#include <asm/arch/sys_proto.h> + +/************************************************************ + * sdelay() - simple spin loop. Will be constant time as + * its generally used in bypass conditions only. This + * is necessary until timers are accessible. + * + * not inline to increase chances its in cache when called + *************************************************************/ +void sdelay(unsigned long loops) +{ + __asm__ volatile ("1:\n" "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0"(loops)); +} + +/***************************************************************** + * sr32 - clear & set a value in a bit range for a 32 bit address + *****************************************************************/ +void sr32(void *addr, u32 start_bit, u32 num_bits, u32 value) +{ + u32 tmp, msk = 0; + msk = 1 << num_bits; + --msk; + tmp = readl((u32)addr) & ~(msk << start_bit); + tmp |= value << start_bit; + writel(tmp, (u32)addr); +} + +/********************************************************************* + * wait_on_value() - common routine to allow waiting for changes in + * volatile regs. + *********************************************************************/ +u32 wait_on_value(u32 read_bit_mask, u32 match_value, void *read_addr, + u32 bound) +{ + u32 i = 0, val; + do { + ++i; + val = readl((u32)read_addr) & read_bit_mask; + if (val == match_value) + return 1; + if (i == bound) + return 0; + } while (1); +} diff --git a/cpu/arm_cortexa8/start.S b/cpu/arm_cortexa8/start.S new file mode 100644 index 0000000..07acdbd --- /dev/null +++ b/cpu/arm_cortexa8/start.S @@ -0,0 +1,516 @@ +/* + * armboot - Startup Code for OMAP3530/ARM Cortex CPU-core + * + * Copyright (c) 2004 Texas Instruments <r-woodruff2@ti.com> + * + * Copyright (c) 2001 Marius Gröger <mag@sysgo.de> + * Copyright (c) 2002 Alex Züpke <azu@sysgo.de> + * Copyright (c) 2002 Gary Jennejohn <gj@denx.de> + * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com> + * Copyright (c) 2003 Kshitij <kshitij@ti.com> + * Copyright (c) 2006-2008 Syed Mohammed Khasim <x0khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> + +.globl _start +_start: b reset + ldr pc, _undefined_instruction + ldr pc, _software_interrupt + ldr pc, _prefetch_abort + ldr pc, _data_abort + ldr pc, _not_used + ldr pc, _irq + ldr pc, _fiq + +_undefined_instruction: .word undefined_instruction +_software_interrupt: .word software_interrupt +_prefetch_abort: .word prefetch_abort +_data_abort: .word data_abort +_not_used: .word not_used +_irq: .word irq +_fiq: .word fiq +_pad: .word 0x12345678 /* now 16*4=64 */ +.global _end_vect +_end_vect: + + .balignl 16,0xdeadbeef +/************************************************************************* + * + * Startup Code (reset vector) + * + * do important init only if we don't start from memory! + * setup Memory and board specific bits prior to relocation. + * relocate armboot to ram + * setup stack + * + *************************************************************************/ + +_TEXT_BASE: + .word TEXT_BASE + +.globl _armboot_start +_armboot_start: + .word _start + +/* + * These are defined in the board-specific linker script. + */ +.globl _bss_start +_bss_start: + .word __bss_start + +.globl _bss_end +_bss_end: + .word _end + +#ifdef CONFIG_USE_IRQ +/* IRQ stack memory (calculated at run-time) */ +.globl IRQ_STACK_START +IRQ_STACK_START: + .word 0x0badc0de + +/* IRQ stack memory (calculated at run-time) */ +.globl FIQ_STACK_START +FIQ_STACK_START: + .word 0x0badc0de +#endif + +/* + * the actual reset code + */ + +reset: + /* + * set the cpu to SVC32 mode + */ + mrs r0, cpsr + bic r0, r0, #0x1f + orr r0, r0, #0xd3 + msr cpsr,r0 + +#if (CONFIG_OMAP34XX) + /* Copy vectors to mask ROM indirect addr */ + adr r0, _start @ r0 <- current position of code + add r0, r0, #4 @ skip reset vector + mov r2, #64 @ r2 <- size to copy + add r2, r0, r2 @ r2 <- source end address + mov r1, #SRAM_OFFSET0 @ build vect addr + mov r3, #SRAM_OFFSET1 + add r1, r1, r3 + mov r3, #SRAM_OFFSET2 + add r1, r1, r3 +next: + ldmia r0!, {r3 - r10} @ copy from source address [r0] + stmia r1!, {r3 - r10} @ copy to target address [r1] + cmp r0, r2 @ until source end address [r2] + bne next @ loop until equal */ +#if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_ONENAND_BOOT) + /* No need to copy/exec the clock code - DPLL adjust already done + * in NAND/oneNAND Boot. + */ + bl cpy_clk_code @ put dpll adjust code behind vectors +#endif /* NAND Boot */ +#endif + /* the mask ROM code should have PLL and others stable */ +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + bl cpu_init_crit +#endif + +#ifndef CONFIG_SKIP_RELOCATE_UBOOT +relocate: @ relocate U-Boot to RAM + adr r0, _start @ r0 <- current position of code + ldr r1, _TEXT_BASE @ test if we run from flash or RAM + cmp r0, r1 @ don't reloc during debug + beq stack_setup + + ldr r2, _armboot_start + ldr r3, _bss_start + sub r2, r3, r2 @ r2 <- size of armboot + add r2, r0, r2 @ r2 <- source end address + +copy_loop: @ copy 32 bytes at a time + ldmia r0!, {r3 - r10} @ copy from source address [r0] + stmia r1!, {r3 - r10} @ copy to target address [r1] + cmp r0, r2 @ until source end addreee [r2] + ble copy_loop +#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ + + /* Set up the stack */ +stack_setup: + ldr r0, _TEXT_BASE @ upper 128 KiB: relocated uboot + sub r0, r0, #CONFIG_SYS_MALLOC_LEN @ malloc area + sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE @ bdinfo +#ifdef CONFIG_USE_IRQ + sub r0, r0, #(CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ) +#endif + sub sp, r0, #12 @ leave 3 words for abort-stack + and sp, sp, #~7 @ 8 byte alinged for (ldr/str)d + + /* Clear BSS (if any). Is below tx (watch load addr - need space) */ +clear_bss: + ldr r0, _bss_start @ find start of bss segment + ldr r1, _bss_end @ stop here + mov r2, #0x00000000 @ clear value +clbss_l: + str r2, [r0] @ clear BSS location + cmp r0, r1 @ are we at the end yet + add r0, r0, #4 @ increment clear index pointer + bne clbss_l @ keep clearing till at end + + ldr pc, _start_armboot @ jump to C code + +_start_armboot: .word start_armboot + + +/************************************************************************* + * + * CPU_init_critical registers + * + * setup important registers + * setup memory timing + * + *************************************************************************/ +cpu_init_crit: + /* + * Invalidate L1 I/D + */ + mov r0, #0 @ set up for MCR + mcr p15, 0, r0, c8, c7, 0 @ invalidate TLBs + mcr p15, 0, r0, c7, c5, 0 @ invalidate icache + + /* + * disable MMU stuff and caches + */ + mrc p15, 0, r0, c1, c0, 0 + bic r0, r0, #0x00002000 @ clear bits 13 (--V-) + bic r0, r0, #0x00000007 @ clear bits 2:0 (-CAM) + orr r0, r0, #0x00000002 @ set bit 1 (--A-) Align + orr r0, r0, #0x00000800 @ set bit 12 (Z---) BTB + mcr p15, 0, r0, c1, c0, 0 + + /* + * Jump to board specific initialization... + * The Mask ROM will have already initialized + * basic memory. Go here to bump up clock rate and handle + * wake up conditions. + */ + mov ip, lr @ persevere link reg across call + bl lowlevel_init @ go setup pll,mux,memory + mov lr, ip @ restore link + mov pc, lr @ back to my caller +/* + ************************************************************************* + * + * Interrupt handling + * + ************************************************************************* + */ +@ +@ IRQ stack frame. +@ +#define S_FRAME_SIZE 72 + +#define S_OLD_R0 68 +#define S_PSR 64 +#define S_PC 60 +#define S_LR 56 +#define S_SP 52 + +#define S_IP 48 +#define S_FP 44 +#define S_R10 40 +#define S_R9 36 +#define S_R8 32 +#define S_R7 28 +#define S_R6 24 +#define S_R5 20 +#define S_R4 16 +#define S_R3 12 +#define S_R2 8 +#define S_R1 4 +#define S_R0 0 + +#define MODE_SVC 0x13 +#define I_BIT 0x80 + +/* + * use bad_save_user_regs for abort/prefetch/undef/swi ... + * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling + */ + + .macro bad_save_user_regs + sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current + @ user stack + stmia sp, {r0 - r12} @ Save user registers (now in + @ svc mode) r0-r12 + + ldr r2, _armboot_start + sub r2, r2, #(CONFIG_SYS_MALLOC_LEN) + sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE + 8) @ set base 2 words into abort + @ stack + ldmia r2, {r2 - r3} @ get values for "aborted" pc + @ and cpsr (into parm regs) + add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack + + add r5, sp, #S_SP + mov r1, lr + stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr + mov r0, sp @ save current stack into r0 + @ (param register) + .endm + + .macro irq_save_user_regs + sub sp, sp, #S_FRAME_SIZE + stmia sp, {r0 - r12} @ Calling r0-r12 + add r8, sp, #S_PC @ !! R8 NEEDS to be saved !! + @ a reserved stack spot would + @ be good. + stmdb r8, {sp, lr}^ @ Calling SP, LR + str lr, [r8, #0] @ Save calling PC + mrs r6, spsr + str r6, [r8, #4] @ Save CPSR + str r0, [r8, #8] @ Save OLD_R0 + mov r0, sp + .endm + + .macro irq_restore_user_regs + ldmia sp, {r0 - lr}^ @ Calling r0 - lr + mov r0, r0 + ldr lr, [sp, #S_PC] @ Get PC + add sp, sp, #S_FRAME_SIZE + subs pc, lr, #4 @ return & move spsr_svc into + @ cpsr + .endm + + .macro get_bad_stack + ldr r13, _armboot_start @ setup our mode stack (enter + @ in banked mode) + sub r13, r13, #(CONFIG_SYS_MALLOC_LEN) @ move past malloc pool + sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE + 8) @ move to reserved a couple + @ spots for abort stack + + str lr, [r13] @ save caller lr in position 0 + @ of saved stack + mrs lr, spsr @ get the spsr + str lr, [r13, #4] @ save spsr in position 1 of + @ saved stack + + mov r13, #MODE_SVC @ prepare SVC-Mode + @ msr spsr_c, r13 + msr spsr, r13 @ switch modes, make sure + @ moves will execute + mov lr, pc @ capture return pc + movs pc, lr @ jump to next instruction & + @ switch modes. + .endm + + .macro get_bad_stack_swi + sub r13, r13, #4 @ space on current stack for + @ scratch reg. + str r0, [r13] @ save R0's value. + ldr r0, _armboot_start @ get data regions start + sub r0, r0, #(CONFIG_SYS_MALLOC_LEN) @ move past malloc pool + sub r0, r0, #(CONFIG_SYS_GBL_DATA_SIZE + 8) @ move past gbl and a couple + @ spots for abort stack + str lr, [r0] @ save caller lr in position 0 + @ of saved stack + mrs r0, spsr @ get the spsr + str lr, [r0, #4] @ save spsr in position 1 of + @ saved stack + ldr r0, [r13] @ restore r0 + add r13, r13, #4 @ pop stack entry + .endm + + .macro get_irq_stack @ setup IRQ stack + ldr sp, IRQ_STACK_START + .endm + + .macro get_fiq_stack @ setup FIQ stack + ldr sp, FIQ_STACK_START + .endm + +/* + * exception handlers + */ + .align 5 +undefined_instruction: + get_bad_stack + bad_save_user_regs + bl do_undefined_instruction + + .align 5 +software_interrupt: + get_bad_stack_swi + bad_save_user_regs + bl do_software_interrupt + + .align 5 +prefetch_abort: + get_bad_stack + bad_save_user_regs + bl do_prefetch_abort + + .align 5 +data_abort: + get_bad_stack + bad_save_user_regs + bl do_data_abort + + .align 5 +not_used: + get_bad_stack + bad_save_user_regs + bl do_not_used + +#ifdef CONFIG_USE_IRQ + + .align 5 +irq: + get_irq_stack + irq_save_user_regs + bl do_irq + irq_restore_user_regs + + .align 5 +fiq: + get_fiq_stack + /* someone ought to write a more effective fiq_save_user_regs */ + irq_save_user_regs + bl do_fiq + irq_restore_user_regs + +#else + + .align 5 +irq: + get_bad_stack + bad_save_user_regs + bl do_irq + + .align 5 +fiq: + get_bad_stack + bad_save_user_regs + bl do_fiq + +#endif + +/* + * v7_flush_dcache_all() + * + * Flush the whole D-cache. + * + * Corrupted registers: r0-r5, r7, r9-r11 + * + * - mm - mm_struct describing address space + */ + .align 5 +.global v7_flush_dcache_all +v7_flush_dcache_all: + stmfd r13!, {r0 - r5, r7, r9 - r12, r14} + + mov r7, r0 @ take a backup of device type + cmp r0, #0x3 @ check if the device type is + @ GP + moveq r12, #0x1 @ set up to invalide L2 +smi: .word 0x01600070 @ Call SMI monitor (smieq) + cmp r7, #0x3 @ compare again in case its + @ lost + beq finished_inval @ if GP device, inval done + @ above + + mrc p15, 1, r0, c0, c0, 1 @ read clidr + ands r3, r0, #0x7000000 @ extract loc from clidr + mov r3, r3, lsr #23 @ left align loc bit field + beq finished_inval @ if loc is 0, then no need to + @ clean + mov r10, #0 @ start clean at cache level 0 +inval_loop1: + add r2, r10, r10, lsr #1 @ work out 3x current cache + @ level + mov r1, r0, lsr r2 @ extract cache type bits from + @ clidr + and r1, r1, #7 @ mask of the bits for current + @ cache only + cmp r1, #2 @ see what cache we have at + @ this level + blt skip_inval @ skip if no cache, or just + @ i-cache + mcr p15, 2, r10, c0, c0, 0 @ select current cache level + @ in cssr + mov r2, #0 @ operand for mcr SBZ + mcr p15, 0, r2, c7, c5, 4 @ flush prefetch buffer to + @ sych the new cssr&csidr, + @ with armv7 this is 'isb', + @ but we compile with armv5 + mrc p15, 1, r1, c0, c0, 0 @ read the new csidr + and r2, r1, #7 @ extract the length of the + @ cache lines + add r2, r2, #4 @ add 4 (line length offset) + ldr r4, =0x3ff + ands r4, r4, r1, lsr #3 @ find maximum number on the + @ way size + clz r5, r4 @ find bit position of way + @ size increment + ldr r7, =0x7fff + ands r7, r7, r1, lsr #13 @ extract max number of the + @ index size +inval_loop2: + mov r9, r4 @ create working copy of max + @ way size +inval_loop3: + orr r11, r10, r9, lsl r5 @ factor way and cache number + @ into r11 + orr r11, r11, r7, lsl r2 @ factor index number into r11 + mcr p15, 0, r11, c7, c6, 2 @ invalidate by set/way + subs r9, r9, #1 @ decrement the way + bge inval_loop3 + subs r7, r7, #1 @ decrement the index + bge inval_loop2 +skip_inval: + add r10, r10, #2 @ increment cache number + cmp r3, r10 + bgt inval_loop1 +finished_inval: + mov r10, #0 @ swith back to cache level 0 + mcr p15, 2, r10, c0, c0, 0 @ select current cache level + @ in cssr + mcr p15, 0, r10, c7, c5, 4 @ flush prefetch buffer, + @ with armv7 this is 'isb', + @ but we compile with armv5 + + ldmfd r13!, {r0 - r5, r7, r9 - r12, pc} + + + .align 5 +.global reset_cpu +reset_cpu: + ldr r1, rstctl @ get addr for global reset + @ reg + mov r3, #0x2 @ full reset pll + mpu + str r3, [r1] @ force reset + mov r0, r0 +_loop_forever: + b _loop_forever +rstctl: + .word PRM_RSTCTRL diff --git a/doc/README.nmdk8815 b/doc/README.nmdk8815 new file mode 100644 index 0000000..453cfae --- /dev/null +++ b/doc/README.nmdk8815 @@ -0,0 +1,22 @@ + +The Nomadik 8815 CPU has a "secure" boot mode where no external access +(not even JTAG) is allowed. The "remap" bits in the evaluation board +are configured in order to boot from the internal ROM memory (in +secure mode). + +The boot process as defined by the manufacturer executes external code +(loaded from NAND or OneNAND) that that disables such "security" in +order to run u-boot and later the kernel without constraints. Such +code is a proprietary initial boot loader, called "X-Loader" (in case +anyone wonders, it has no relations with other loaders with the same +name and there is no GPL code inside the ST X-Loader). + +SDRAM configuration, PLL setup and initial loading from NAND is +implemented in the X-Loader, so U-Boot is already running in SDRAM +when control is handed over to it. + + +On www.st.com/nomadik and on www.stnwireless.com there are documents, +summary data and white papers on Nomadik. The full datasheet for +STn8815 is not currently available on line but under specific request +to the local ST sales offices. diff --git a/doc/README.omap3 b/doc/README.omap3 new file mode 100644 index 0000000..1ba307f --- /dev/null +++ b/doc/README.omap3 @@ -0,0 +1,116 @@ + +Summary +======= + +This README is about U-Boot support for TI's ARM Cortex-A8 based OMAP3 [1] +family of SoCs. TI's OMAP3 SoC family contains an ARM Cortex-A8. Additionally, +some family members contain a TMS320C64x+ DSP and/or an Imagination SGX 2D/3D +graphics processor and various other standard peripherals. + +Currently the following boards are supported: + +* OMAP3530 BeagleBoard [2] + +* Gumstix Overo [3] + +* TI EVM [4] + +* OpenPandora Ltd. Pandora [5] + +* TI/Logic PD Zoom MDK [6] + +Toolchain +========= + +While ARM Cortex-A8 support ARM v7 instruction set (-march=armv7a) we compile +with -march=armv5 to allow more compilers to work. For U-Boot code this has +no performance impact. + +Build +===== + +* BeagleBoard: + +make omap3_beagle_config +make + +* Gumstix Overo: + +make omap3_overo_config +make + +* TI EVM: + +make omap3_evm_config +make + +* Pandora: + +make omap3_pandora_config +make + +* Zoom MDK: + +make omap3_zoom1_config +make + +Custom commands +=============== + +To make U-Boot for OMAP3 support NAND device SW or HW ECC calculation, U-Boot +for OMAP3 supports custom user command + +nandecc hw/sw + +To be compatible with NAND drivers using SW ECC (e.g. kernel code) + +nandecc sw + +enables SW ECC calculation. HW ECC enabled with + +nandecc hw + +is typically used to write 2nd stage bootloader (known as 'x-loader') which is +executed by OMAP3's boot rom and therefore has to be written with HW ECC. + +For all other commands see + +help + +Acknowledgements +================ + +OMAP3 U-Boot is based on U-Boot tar ball [7] for BeagleBoard and EVM done by +several TI employees. + +Links +===== + +[1] OMAP3: + +http://www.ti.com/omap3 (high volume) and +http://www.ti.com/omap35x (broad market) + +[2] OMAP3530 BeagleBoard: + +http://beagleboard.org/ + +[3] Gumstix Overo: + +http://www.gumstix.net/Overo/ + +[4] TI EVM: + +http://focus.ti.com/docs/toolsw/folders/print/tmdxevm3503.html + +[5] OpenPandora Ltd. Pandora: + +http://openpandora.org/ + +[6] TI/Logic PD Zoom MDK: + +http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit + +[7] TI OMAP3 U-Boot: + +http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 08cb91d..9c74657 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -30,6 +30,7 @@ COBJS-$(CONFIG_FSL_I2C) += fsl_i2c.o COBJS-$(CONFIG_I2C_MXC) += mxc_i2c.o COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o +COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o COBJS-$(CONFIG_SOFT_I2C) += soft_i2c.o COBJS-$(CONFIG_TSI108_I2C) += tsi108_i2c.o diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c index 4427938..6784603 100644 --- a/drivers/i2c/omap24xx_i2c.c +++ b/drivers/i2c/omap24xx_i2c.c @@ -109,7 +109,11 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value) status = wait_for_pin (); if (status & I2C_STAT_RRDY) { +#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) + *value = readb (I2C_DATA); +#else *value = readw (I2C_DATA); +#endif udelay (20000); } else { i2c_error = 1; @@ -150,8 +154,23 @@ static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value) status = wait_for_pin (); if (status & I2C_STAT_XRDY) { +#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) + /* send out 1 byte */ + writeb (regoffset, I2C_DATA); + writew (I2C_STAT_XRDY, I2C_STAT); + + status = wait_for_pin (); + if ((status & I2C_STAT_XRDY)) { + /* send out next 1 byte */ + writeb (value, I2C_DATA); + writew (I2C_STAT_XRDY, I2C_STAT); + } else { + i2c_error = 1; + } +#else /* send out two bytes */ writew ((value << 8) + regoffset, I2C_DATA); +#endif /* must have enough delay to allow BB bit to go low */ udelay (50000); if (readw (I2C_STAT) & I2C_STAT_NACK) { @@ -188,7 +207,11 @@ static void flush_fifo(void) while(1){ stat = readw(I2C_STAT); if(stat == I2C_STAT_RRDY){ +#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) + readb(I2C_DATA); +#else readw(I2C_DATA); +#endif writew(I2C_STAT_RRDY,I2C_STAT); udelay(1000); }else diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 3dc031b..bb0d52e 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk LIB := $(obj)libmmc.a COBJS-$(CONFIG_ATMEL_MCI) += atmel_mci.o +COBJS-$(CONFIG_OMAP3_MMC) += omap3_mmc.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/mmc/omap3_mmc.c b/drivers/mmc/omap3_mmc.c new file mode 100644 index 0000000..0148702 --- /dev/null +++ b/drivers/mmc/omap3_mmc.c @@ -0,0 +1,558 @@ +/* + * (C) Copyright 2008 + * Texas Instruments, <www.ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation's version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <fat.h> +#include <mmc.h> +#include <part.h> +#include <i2c.h> + +const unsigned short mmc_transspeed_val[15][4] = { + {CLKD(10, 1), CLKD(10, 10), CLKD(10, 100), CLKD(10, 1000)}, + {CLKD(12, 1), CLKD(12, 10), CLKD(12, 100), CLKD(12, 1000)}, + {CLKD(13, 1), CLKD(13, 10), CLKD(13, 100), CLKD(13, 1000)}, + {CLKD(15, 1), CLKD(15, 10), CLKD(15, 100), CLKD(15, 1000)}, + {CLKD(20, 1), CLKD(20, 10), CLKD(20, 100), CLKD(20, 1000)}, + {CLKD(26, 1), CLKD(26, 10), CLKD(26, 100), CLKD(26, 1000)}, + {CLKD(30, 1), CLKD(30, 10), CLKD(30, 100), CLKD(30, 1000)}, + {CLKD(35, 1), CLKD(35, 10), CLKD(35, 100), CLKD(35, 1000)}, + {CLKD(40, 1), CLKD(40, 10), CLKD(40, 100), CLKD(40, 1000)}, + {CLKD(45, 1), CLKD(45, 10), CLKD(45, 100), CLKD(45, 1000)}, + {CLKD(52, 1), CLKD(52, 10), CLKD(52, 100), CLKD(52, 1000)}, + {CLKD(55, 1), CLKD(55, 10), CLKD(55, 100), CLKD(55, 1000)}, + {CLKD(60, 1), CLKD(60, 10), CLKD(60, 100), CLKD(60, 1000)}, + {CLKD(70, 1), CLKD(70, 10), CLKD(70, 100), CLKD(70, 1000)}, + {CLKD(80, 1), CLKD(80, 10), CLKD(80, 100), CLKD(80, 1000)} +}; + +mmc_card_data cur_card_data; +static block_dev_desc_t mmc_blk_dev; + +block_dev_desc_t *mmc_get_dev(int dev) +{ + return (block_dev_desc_t *) &mmc_blk_dev; +} + +void twl4030_mmc_config(void) +{ + unsigned char data; + + data = 0x20; + i2c_write(0x4B, 0x82, 1, &data, 1); + data = 0x2; + i2c_write(0x4B, 0x85, 1, &data, 1); +} + +unsigned char mmc_board_init(void) +{ + unsigned int value = 0; + + twl4030_mmc_config(); + + value = CONTROL_PBIAS_LITE; + CONTROL_PBIAS_LITE = value | (1 << 2) | (1 << 1) | (1 << 9); + + value = CONTROL_DEV_CONF0; + CONTROL_DEV_CONF0 = value | (1 << 24); + + return 1; +} + +void mmc_init_stream(void) +{ + volatile unsigned int mmc_stat; + + OMAP_HSMMC_CON |= INIT_INITSTREAM; + + OMAP_HSMMC_CMD = MMC_CMD0; + do { + mmc_stat = OMAP_HSMMC_STAT; + } while (!(mmc_stat & CC_MASK)); + + OMAP_HSMMC_STAT = CC_MASK; + + OMAP_HSMMC_CMD = MMC_CMD0; + do { + mmc_stat = OMAP_HSMMC_STAT; + } while (!(mmc_stat & CC_MASK)); + + OMAP_HSMMC_STAT = OMAP_HSMMC_STAT; + OMAP_HSMMC_CON &= ~INIT_INITSTREAM; +} + +unsigned char mmc_clock_config(unsigned int iclk, unsigned short clk_div) +{ + unsigned int val; + + mmc_reg_out(OMAP_HSMMC_SYSCTL, (ICE_MASK | DTO_MASK | CEN_MASK), + (ICE_STOP | DTO_15THDTO | CEN_DISABLE)); + + switch (iclk) { + case CLK_INITSEQ: + val = MMC_INIT_SEQ_CLK / 2; + break; + case CLK_400KHZ: + val = MMC_400kHz_CLK; + break; + case CLK_MISC: + val = clk_div; + break; + default: + return 0; + } + mmc_reg_out(OMAP_HSMMC_SYSCTL, + ICE_MASK | CLKD_MASK, (val << CLKD_OFFSET) | ICE_OSCILLATE); + + while ((OMAP_HSMMC_SYSCTL & ICS_MASK) == ICS_NOTREADY) ; + + OMAP_HSMMC_SYSCTL |= CEN_ENABLE; + return 1; +} + +unsigned char mmc_init_setup(void) +{ + unsigned int reg_val; + + mmc_board_init(); + + OMAP_HSMMC_SYSCONFIG |= MMC_SOFTRESET; + while ((OMAP_HSMMC_SYSSTATUS & RESETDONE) == 0) ; + + OMAP_HSMMC_SYSCTL |= SOFTRESETALL; + while ((OMAP_HSMMC_SYSCTL & SOFTRESETALL) != 0x0) ; + + OMAP_HSMMC_HCTL = DTW_1_BITMODE | SDBP_PWROFF | SDVS_3V0; + OMAP_HSMMC_CAPA |= VS30_3V0SUP | VS18_1V8SUP; + + reg_val = OMAP_HSMMC_CON & RESERVED_MASK; + + OMAP_HSMMC_CON = CTPL_MMC_SD | reg_val | WPP_ACTIVEHIGH | + CDP_ACTIVEHIGH | MIT_CTO | DW8_1_4BITMODE | MODE_FUNC | + STR_BLOCK | HR_NOHOSTRESP | INIT_NOINIT | NOOPENDRAIN; + + mmc_clock_config(CLK_INITSEQ, 0); + OMAP_HSMMC_HCTL |= SDBP_PWRON; + + OMAP_HSMMC_IE = 0x307f0033; + + mmc_init_stream(); + return 1; +} + +unsigned char mmc_send_cmd(unsigned int cmd, unsigned int arg, + unsigned int *response) +{ + volatile unsigned int mmc_stat; + + while ((OMAP_HSMMC_PSTATE & DATI_MASK) == DATI_CMDDIS) ; + + OMAP_HSMMC_BLK = BLEN_512BYTESLEN | NBLK_STPCNT; + OMAP_HSMMC_STAT = 0xFFFFFFFF; + OMAP_HSMMC_ARG = arg; + OMAP_HSMMC_CMD = cmd | CMD_TYPE_NORMAL | CICE_NOCHECK | + CCCE_NOCHECK | MSBS_SGLEBLK | ACEN_DISABLE | BCE_DISABLE | + DE_DISABLE; + + while (1) { + do { + mmc_stat = OMAP_HSMMC_STAT; + } while (mmc_stat == 0); + + if ((mmc_stat & ERRI_MASK) != 0) + return (unsigned char) mmc_stat; + + if (mmc_stat & CC_MASK) { + OMAP_HSMMC_STAT = CC_MASK; + response[0] = OMAP_HSMMC_RSP10; + if ((cmd & RSP_TYPE_MASK) == RSP_TYPE_LGHT136) { + response[1] = OMAP_HSMMC_RSP32; + response[2] = OMAP_HSMMC_RSP54; + response[3] = OMAP_HSMMC_RSP76; + } + break; + } + } + return 1; +} + +unsigned char mmc_read_data(unsigned int *output_buf) +{ + volatile unsigned int mmc_stat; + unsigned int read_count = 0; + + /* + * Start Polled Read + */ + while (1) { + do { + mmc_stat = OMAP_HSMMC_STAT; + } while (mmc_stat == 0); + + if ((mmc_stat & ERRI_MASK) != 0) + return (unsigned char) mmc_stat; + + if (mmc_stat & BRR_MASK) { + unsigned int k; + + OMAP_HSMMC_STAT |= BRR_MASK; + for (k = 0; k < MMCSD_SECTOR_SIZE / 4; k++) { + *output_buf = OMAP_HSMMC_DATA; + output_buf++; + read_count += 4; + } + } + + if (mmc_stat & BWR_MASK) + OMAP_HSMMC_STAT |= BWR_MASK; + + if (mmc_stat & TC_MASK) { + OMAP_HSMMC_STAT |= TC_MASK; + break; + } + } + return 1; +} + +unsigned char mmc_detect_card(mmc_card_data *mmc_card_cur) +{ + unsigned char err; + unsigned int argument = 0; + unsigned int ocr_value, ocr_recvd, ret_cmd41, hcs_val; + unsigned int resp[4]; + unsigned short retry_cnt = 2000; + + /* Set to Initialization Clock */ + err = mmc_clock_config(CLK_400KHZ, 0); + if (err != 1) + return err; + + mmc_card_cur->RCA = MMC_RELATIVE_CARD_ADDRESS; + argument = 0x00000000; + + ocr_value = (0x1FF << 15); + err = mmc_send_cmd(MMC_CMD0, argument, resp); + if (err != 1) + return err; + + argument = SD_CMD8_CHECK_PATTERN | SD_CMD8_2_7_3_6_V_RANGE; + err = mmc_send_cmd(MMC_SDCMD8, argument, resp); + hcs_val = (err == 1) ? + MMC_OCR_REG_HOST_CAPACITY_SUPPORT_SECTOR : + MMC_OCR_REG_HOST_CAPACITY_SUPPORT_BYTE; + + argument = 0x0000 << 16; + err = mmc_send_cmd(MMC_CMD55, argument, resp); + if (err == 1) { + mmc_card_cur->card_type = SD_CARD; + ocr_value |= hcs_val; + ret_cmd41 = MMC_ACMD41; + } else { + mmc_card_cur->card_type = MMC_CARD; + ocr_value |= MMC_OCR_REG_ACCESS_MODE_SECTOR; + ret_cmd41 = MMC_CMD1; + OMAP_HSMMC_CON &= ~OD; + OMAP_HSMMC_CON |= OPENDRAIN; + } + + argument = ocr_value; + err = mmc_send_cmd(ret_cmd41, argument, resp); + if (err != 1) + return err; + + ocr_recvd = ((mmc_resp_r3 *) resp)->ocr; + + while (!(ocr_recvd & (0x1 << 31)) && (retry_cnt > 0)) { + retry_cnt--; + if (mmc_card_cur->card_type == SD_CARD) { + argument = 0x0000 << 16; + err = mmc_send_cmd(MMC_CMD55, argument, resp); + } + + argument = ocr_value; + err = mmc_send_cmd(ret_cmd41, argument, resp); + if (err != 1) + return err; + ocr_recvd = ((mmc_resp_r3 *) resp)->ocr; + } + + if (!(ocr_recvd & (0x1 << 31))) + return 0; + + if (mmc_card_cur->card_type == MMC_CARD) { + if ((ocr_recvd & MMC_OCR_REG_ACCESS_MODE_MASK) == + MMC_OCR_REG_ACCESS_MODE_SECTOR) { + mmc_card_cur->mode = SECTOR_MODE; + } else { + mmc_card_cur->mode = BYTE_MODE; + } + + ocr_recvd &= ~MMC_OCR_REG_ACCESS_MODE_MASK; + } else { + if ((ocr_recvd & MMC_OCR_REG_HOST_CAPACITY_SUPPORT_MASK) + == MMC_OCR_REG_HOST_CAPACITY_SUPPORT_SECTOR) { + mmc_card_cur->mode = SECTOR_MODE; + } else { + mmc_card_cur->mode = BYTE_MODE; + } + ocr_recvd &= ~MMC_OCR_REG_HOST_CAPACITY_SUPPORT_MASK; + } + + ocr_recvd &= ~(0x1 << 31); + if (!(ocr_recvd & ocr_value)) + return 0; + + err = mmc_send_cmd(MMC_CMD2, argument, resp); + if (err != 1) + return err; + + if (mmc_card_cur->card_type == MMC_CARD) { + argument = mmc_card_cur->RCA << 16; + err = mmc_send_cmd(MMC_CMD3, argument, resp); + if (err != 1) + return err; + } else { + argument = 0x00000000; + err = mmc_send_cmd(MMC_SDCMD3, argument, resp); + if (err != 1) + return err; + + mmc_card_cur->RCA = ((mmc_resp_r6 *) resp)->newpublishedrca; + } + + OMAP_HSMMC_CON &= ~OD; + OMAP_HSMMC_CON |= NOOPENDRAIN; + return 1; +} + +unsigned char mmc_read_cardsize(mmc_card_data *mmc_dev_data, + mmc_csd_reg_t *cur_csd) +{ + mmc_extended_csd_reg_t ext_csd; + unsigned int size, count, blk_len, blk_no, card_size, argument; + unsigned char err; + unsigned int resp[4]; + + if (mmc_dev_data->mode == SECTOR_MODE) { + if (mmc_dev_data->card_type == SD_CARD) { + card_size = + (((mmc_sd2_csd_reg_t *) cur_csd)-> + c_size_lsb & MMC_SD2_CSD_C_SIZE_LSB_MASK) | + ((((mmc_sd2_csd_reg_t *) cur_csd)-> + c_size_msb & MMC_SD2_CSD_C_SIZE_MSB_MASK) + << MMC_SD2_CSD_C_SIZE_MSB_OFFSET); + mmc_dev_data->size = card_size * 1024; + if (mmc_dev_data->size == 0) + return 0; + } else { + argument = 0x00000000; + err = mmc_send_cmd(MMC_CMD8, argument, resp); + if (err != 1) + return err; + err = mmc_read_data((unsigned int *) &ext_csd); + if (err != 1) + return err; + mmc_dev_data->size = ext_csd.sectorcount; + + if (mmc_dev_data->size == 0) + mmc_dev_data->size = 8388608; + } + } else { + if (cur_csd->c_size_mult >= 8) + return 0; + + if (cur_csd->read_bl_len >= 12) + return 0; + + /* Compute size */ + count = 1 << (cur_csd->c_size_mult + 2); + card_size = (cur_csd->c_size_lsb & MMC_CSD_C_SIZE_LSB_MASK) | + ((cur_csd->c_size_msb & MMC_CSD_C_SIZE_MSB_MASK) + << MMC_CSD_C_SIZE_MSB_OFFSET); + blk_no = (card_size + 1) * count; + blk_len = 1 << cur_csd->read_bl_len; + size = blk_no * blk_len; + mmc_dev_data->size = size / MMCSD_SECTOR_SIZE; + if (mmc_dev_data->size == 0) + return 0; + } + return 1; +} + +unsigned char omap_mmc_read_sect(unsigned int start_sec, unsigned int num_bytes, + mmc_card_data *mmc_c, + unsigned long *output_buf) +{ + unsigned char err; + unsigned int argument; + unsigned int resp[4]; + unsigned int num_sec_val = + (num_bytes + (MMCSD_SECTOR_SIZE - 1)) / MMCSD_SECTOR_SIZE; + unsigned int sec_inc_val; + + if (num_sec_val == 0) + return 1; + + if (mmc_c->mode == SECTOR_MODE) { + argument = start_sec; + sec_inc_val = 1; + } else { + argument = start_sec * MMCSD_SECTOR_SIZE; + sec_inc_val = MMCSD_SECTOR_SIZE; + } + + while (num_sec_val) { + err = mmc_send_cmd(MMC_CMD17, argument, resp); + if (err != 1) + return err; + + err = mmc_read_data((unsigned int *) output_buf); + if (err != 1) + return err; + + output_buf += (MMCSD_SECTOR_SIZE / 4); + argument += sec_inc_val; + num_sec_val--; + } + return 1; +} + +unsigned char configure_mmc(mmc_card_data *mmc_card_cur) +{ + unsigned char ret_val; + unsigned int argument; + unsigned int resp[4]; + unsigned int trans_clk, trans_fact, trans_unit, retries = 2; + mmc_csd_reg_t Card_CSD; + unsigned char trans_speed; + + ret_val = mmc_init_setup(); + + if (ret_val != 1) + return ret_val; + + do { + ret_val = mmc_detect_card(mmc_card_cur); + retries--; + } while ((retries > 0) && (ret_val != 1)); + + argument = mmc_card_cur->RCA << 16; + ret_val = mmc_send_cmd(MMC_CMD9, argument, resp); + if (ret_val != 1) + return ret_val; + + ((unsigned int *) &Card_CSD)[3] = resp[3]; + ((unsigned int *) &Card_CSD)[2] = resp[2]; + ((unsigned int *) &Card_CSD)[1] = resp[1]; + ((unsigned int *) &Card_CSD)[0] = resp[0]; + + if (mmc_card_cur->card_type == MMC_CARD) + mmc_card_cur->version = Card_CSD.spec_vers; + + trans_speed = Card_CSD.tran_speed; + + ret_val = mmc_send_cmd(MMC_CMD4, MMC_DSR_DEFAULT << 16, resp); + if (ret_val != 1) + return ret_val; + + trans_unit = trans_speed & MMC_CSD_TRAN_SPEED_UNIT_MASK; + trans_fact = trans_speed & MMC_CSD_TRAN_SPEED_FACTOR_MASK; + + if (trans_unit > MMC_CSD_TRAN_SPEED_UNIT_100MHZ) + return 0; + + if ((trans_fact < MMC_CSD_TRAN_SPEED_FACTOR_1_0) || + (trans_fact > MMC_CSD_TRAN_SPEED_FACTOR_8_0)) + return 0; + + trans_unit >>= 0; + trans_fact >>= 3; + + trans_clk = mmc_transspeed_val[trans_fact - 1][trans_unit] * 2; + ret_val = mmc_clock_config(CLK_MISC, trans_clk); + + if (ret_val != 1) + return ret_val; + + argument = mmc_card_cur->RCA << 16; + ret_val = mmc_send_cmd(MMC_CMD7_SELECT, argument, resp); + if (ret_val != 1) + return ret_val; + + /* Configure the block length to 512 bytes */ + argument = MMCSD_SECTOR_SIZE; + ret_val = mmc_send_cmd(MMC_CMD16, argument, resp); + if (ret_val != 1) + return ret_val; + + /* get the card size in sectors */ + ret_val = mmc_read_cardsize(mmc_card_cur, &Card_CSD); + if (ret_val != 1) + return ret_val; + + return 1; +} +unsigned long mmc_bread(int dev_num, unsigned long blknr, lbaint_t blkcnt, + void *dst) +{ + omap_mmc_read_sect(blknr, (blkcnt * MMCSD_SECTOR_SIZE), &cur_card_data, + (unsigned long *) dst); + return 1; +} + +int mmc_init(int verbose) +{ + if (configure_mmc(&cur_card_data) != 1) + return 1; + + mmc_blk_dev.if_type = IF_TYPE_MMC; + mmc_blk_dev.part_type = PART_TYPE_DOS; + mmc_blk_dev.dev = 0; + mmc_blk_dev.lun = 0; + mmc_blk_dev.type = 0; + + /* FIXME fill in the correct size (is set to 32MByte) */ + mmc_blk_dev.blksz = MMCSD_SECTOR_SIZE; + mmc_blk_dev.lba = 0x10000; + mmc_blk_dev.removable = 0; + mmc_blk_dev.block_read = mmc_bread; + + fat_register_device(&mmc_blk_dev, 1); + return 0; +} + +int mmc_read(ulong src, uchar *dst, int size) +{ + return 0; +} + +int mmc_write(uchar *src, ulong dst, int size) +{ + return 0; +} + +int mmc2info(ulong addr) +{ + return 0; +} diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index b0abe6e..f7b2b22 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -38,6 +38,7 @@ endif COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o COBJS-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o COBJS-$(CONFIG_NAND_S3C64XX) += s3c64xx.o +COBJS-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o endif COBJS := $(COBJS-y) diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c new file mode 100644 index 0000000..5f8ed39 --- /dev/null +++ b/drivers/mtd/nand/omap_gpmc.c @@ -0,0 +1,353 @@ +/* + * (C) Copyright 2004-2008 Texas Instruments, <www.ti.com> + * Rohit Choraria <rohitkc@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/mem.h> +#include <asm/arch/omap_gpmc.h> +#include <linux/mtd/nand_ecc.h> +#include <nand.h> + +static uint8_t cs; +static gpmc_t *gpmc_base = (gpmc_t *)GPMC_BASE; +static gpmc_csx_t *gpmc_cs_base; +static struct nand_ecclayout hw_nand_oob = GPMC_NAND_HW_ECC_LAYOUT; + +/* + * omap_nand_hwcontrol - Set the address pointers corretly for the + * following address/data/command operation + */ +static void omap_nand_hwcontrol(struct mtd_info *mtd, int32_t cmd, + uint32_t ctrl) +{ + register struct nand_chip *this = mtd->priv; + + /* + * Point the IO_ADDR to DATA and ADDRESS registers instead + * of chip address + */ + switch (ctrl) { + case NAND_CTRL_CHANGE | NAND_CTRL_CLE: + this->IO_ADDR_W = (void __iomem *)&gpmc_cs_base->nand_cmd; + break; + case NAND_CTRL_CHANGE | NAND_CTRL_ALE: + this->IO_ADDR_W = (void __iomem *)&gpmc_cs_base->nand_adr; + break; + case NAND_CTRL_CHANGE | NAND_NCE: + this->IO_ADDR_W = (void __iomem *)&gpmc_cs_base->nand_dat; + break; + } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W); +} + +/* + * omap_hwecc_init - Initialize the Hardware ECC for NAND flash in + * GPMC controller + * @mtd: MTD device structure + * + */ +static void omap_hwecc_init(struct nand_chip *chip) +{ + /* + * Init ECC Control Register + * Clear all ECC | Enable Reg1 + */ + writel(ECCCLEAR | ECCRESULTREG1, &gpmc_base->ecc_control); + writel(ECCSIZE1 | ECCSIZE0 | ECCSIZE0SEL, &gpmc_base->ecc_size_config); +} + +/* + * gen_true_ecc - This function will generate true ECC value, which + * can be used when correcting data read from NAND flash memory core + * + * @ecc_buf: buffer to store ecc code + * + * @return: re-formatted ECC value + */ +static uint32_t gen_true_ecc(uint8_t *ecc_buf) +{ + return ecc_buf[0] | (ecc_buf[1] << 16) | ((ecc_buf[2] & 0xF0) << 20) | + ((ecc_buf[2] & 0x0F) << 8); +} + +/* + * omap_correct_data - Compares the ecc read from nand spare area with ECC + * registers values and corrects one bit error if it has occured + * Further details can be had from OMAP TRM and the following selected links: + * http://en.wikipedia.org/wiki/Hamming_code + * http://www.cs.utexas.edu/users/plaxton/c/337/05f/slides/ErrorCorrection-4.pdf + * + * @mtd: MTD device structure + * @dat: page data + * @read_ecc: ecc read from nand flash + * @calc_ecc: ecc read from ECC registers + * + * @return 0 if data is OK or corrected, else returns -1 + */ +static int omap_correct_data(struct mtd_info *mtd, uint8_t *dat, + uint8_t *read_ecc, uint8_t *calc_ecc) +{ + uint32_t orig_ecc, new_ecc, res, hm; + uint16_t parity_bits, byte; + uint8_t bit; + + /* Regenerate the orginal ECC */ + orig_ecc = gen_true_ecc(read_ecc); + new_ecc = gen_true_ecc(calc_ecc); + /* Get the XOR of real ecc */ + res = orig_ecc ^ new_ecc; + if (res) { + /* Get the hamming width */ + hm = hweight32(res); + /* Single bit errors can be corrected! */ + if (hm == 12) { + /* Correctable data! */ + parity_bits = res >> 16; + bit = (parity_bits & 0x7); + byte = (parity_bits >> 3) & 0x1FF; + /* Flip the bit to correct */ + dat[byte] ^= (0x1 << bit); + } else if (hm == 1) { + printf("Error: Ecc is wrong\n"); + /* ECC itself is corrupted */ + return 2; + } else { + /* + * hm distance != parity pairs OR one, could mean 2 bit + * error OR potentially be on a blank page.. + * orig_ecc: contains spare area data from nand flash. + * new_ecc: generated ecc while reading data area. + * Note: if the ecc = 0, all data bits from which it was + * generated are 0xFF. + * The 3 byte(24 bits) ecc is generated per 512byte + * chunk of a page. If orig_ecc(from spare area) + * is 0xFF && new_ecc(computed now from data area)=0x0, + * this means that data area is 0xFF and spare area is + * 0xFF. A sure sign of a erased page! + */ + if ((orig_ecc == 0x0FFF0FFF) && (new_ecc == 0x00000000)) + return 0; + printf("Error: Bad compare! failed\n"); + /* detected 2 bit error */ + return -1; + } + } + return 0; +} + +/* + * omap_calculate_ecc - Generate non-inverted ECC bytes. + * + * Using noninverted ECC can be considered ugly since writing a blank + * page ie. padding will clear the ECC bytes. This is no problem as + * long nobody is trying to write data on the seemingly unused page. + * Reading an erased page will produce an ECC mismatch between + * generated and read ECC bytes that has to be dealt with separately. + * E.g. if page is 0xFF (fresh erased), and if HW ECC engine within GPMC + * is used, the result of read will be 0x0 while the ECC offsets of the + * spare area will be 0xFF which will result in an ECC mismatch. + * @mtd: MTD structure + * @dat: unused + * @ecc_code: ecc_code buffer + */ +static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat, + uint8_t *ecc_code) +{ + u_int32_t val; + + /* Start Reading from HW ECC1_Result = 0x200 */ + val = readl(&gpmc_base->ecc1_result); + + ecc_code[0] = val & 0xFF; + ecc_code[1] = (val >> 16) & 0xFF; + ecc_code[2] = ((val >> 8) & 0x0F) | ((val >> 20) & 0xF0); + + /* + * Stop reading anymore ECC vals and clear old results + * enable will be called if more reads are required + */ + writel(0x000, &gpmc_base->ecc_config); + + return 0; +} + +/* + * omap_enable_ecc - This function enables the hardware ecc functionality + * @mtd: MTD device structure + * @mode: Read/Write mode + */ +static void omap_enable_hwecc(struct mtd_info *mtd, int32_t mode) +{ + struct nand_chip *chip = mtd->priv; + uint32_t val, dev_width = (chip->options & NAND_BUSWIDTH_16) >> 1; + + switch (mode) { + case NAND_ECC_READ: + case NAND_ECC_WRITE: + /* Clear the ecc result registers, select ecc reg as 1 */ + writel(ECCCLEAR | ECCRESULTREG1, &gpmc_base->ecc_control); + + /* + * Size 0 = 0xFF, Size1 is 0xFF - both are 512 bytes + * tell all regs to generate size0 sized regs + * we just have a single ECC engine for all CS + */ + writel(ECCSIZE1 | ECCSIZE0 | ECCSIZE0SEL, + &gpmc_base->ecc_size_config); + val = (dev_width << 7) | (cs << 1) | (0x1); + writel(val, &gpmc_base->ecc_config); + break; + default: + printf("Error: Unrecognized Mode[%d]!\n", mode); + break; + } +} + +/* + * omap_nand_switch_ecc - switch the ECC operation b/w h/w ecc and s/w ecc. + * The default is to come up on s/w ecc + * + * @hardware - 1 -switch to h/w ecc, 0 - s/w ecc + * + */ +void omap_nand_switch_ecc(int32_t hardware) +{ + struct nand_chip *nand; + struct mtd_info *mtd; + + if (nand_curr_device < 0 || + nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE || + !nand_info[nand_curr_device].name) { + printf("Error: Can't switch ecc, no devices available\n"); + return; + } + + mtd = &nand_info[nand_curr_device]; + nand = mtd->priv; + + nand->options |= NAND_OWN_BUFFERS; + + /* Reset ecc interface */ + nand->ecc.read_page = NULL; + nand->ecc.write_page = NULL; + nand->ecc.read_oob = NULL; + nand->ecc.write_oob = NULL; + nand->ecc.hwctl = NULL; + nand->ecc.correct = NULL; + nand->ecc.calculate = NULL; + + /* Setup the ecc configurations again */ + if (hardware) { + nand->ecc.mode = NAND_ECC_HW; + nand->ecc.layout = &hw_nand_oob; + nand->ecc.size = 512; + nand->ecc.bytes = 3; + nand->ecc.hwctl = omap_enable_hwecc; + nand->ecc.correct = omap_correct_data; + nand->ecc.calculate = omap_calculate_ecc; + omap_hwecc_init(nand); + printf("HW ECC selected\n"); + } else { + nand->ecc.mode = NAND_ECC_SOFT; + /* Use mtd default settings */ + nand->ecc.layout = NULL; + printf("SW ECC selected\n"); + } + + /* Update NAND handling after ECC mode switch */ + nand_scan_tail(mtd); + + nand->options &= ~NAND_OWN_BUFFERS; +} + +/* + * Board-specific NAND initialization. The following members of the + * argument are board-specific: + * - IO_ADDR_R: address to read the 8 I/O lines of the flash device + * - IO_ADDR_W: address to write the 8 I/O lines of the flash device + * - cmd_ctrl: hardwarespecific function for accesing control-lines + * - waitfunc: hardwarespecific function for accesing device ready/busy line + * - ecc.hwctl: function to enable (reset) hardware ecc generator + * - ecc.mode: mode of ecc, see defines + * - chip_delay: chip dependent delay for transfering data from array to + * read regs (tR) + * - options: various chip options. They can partly be set to inform + * nand_scan about special functionality. See the defines for further + * explanation + */ +int board_nand_init(struct nand_chip *nand) +{ + int32_t gpmc_config = 0; + cs = 0; + + /* + * xloader/Uboot's gpmc configuration would have configured GPMC for + * nand type of memory. The following logic scans and latches on to the + * first CS with NAND type memory. + * TBD: need to make this logic generic to handle multiple CS NAND + * devices. + */ + while (cs < GPMC_MAX_CS) { + /* + * Each GPMC set for a single CS is at offset 0x30 + * - already remapped for us + */ + gpmc_cs_base = (gpmc_csx_t *)(GPMC_CONFIG_CS0_BASE + + (cs * GPMC_CONFIG_WIDTH)); + /* Check if NAND type is set */ + if ((readl(&gpmc_cs_base->config1) & 0xC00) == + 0x800) { + /* Found it!! */ + break; + } + cs++; + } + if (cs >= GPMC_MAX_CS) { + printf("NAND: Unable to find NAND settings in " + "GPMC Configuration - quitting\n"); + return -ENODEV; + } + + gpmc_config = readl(&gpmc_base->config); + /* Disable Write protect */ + gpmc_config |= 0x10; + writel(gpmc_config, &gpmc_base->config); + + nand->IO_ADDR_R = (void __iomem *)&gpmc_cs_base->nand_dat; + nand->IO_ADDR_W = (void __iomem *)&gpmc_cs_base->nand_cmd; + + nand->cmd_ctrl = omap_nand_hwcontrol; + nand->options = NAND_NO_PADDING | NAND_CACHEPRG | NAND_NO_AUTOINCR; + /* If we are 16 bit dev, our gpmc config tells us that */ + if ((readl(gpmc_cs_base) & 0x3000) == 0x1000) + nand->options |= NAND_BUSWIDTH_16; + + nand->chip_delay = 100; + /* Default ECC mode */ + nand->ecc.mode = NAND_ECC_SOFT; + + return 0; +} diff --git a/examples/Makefile b/examples/Makefile index b0a8853..927010d 100644 --- a/examples/Makefile +++ b/examples/Makefile @@ -33,9 +33,13 @@ ifeq ($(ARCH),arm) ifeq ($(BOARD),omap2420h4) LOAD_ADDR = 0x80300000 else +ifeq ($(CPU),omap3) +LOAD_ADDR = 0x80300000 +else LOAD_ADDR = 0xc100000 endif endif +endif ifeq ($(ARCH),mips) LOAD_ADDR = 0x80200000 -T mips.lds diff --git a/include/asm-arm/arch-mx31/mx31-regs.h b/include/asm-arm/arch-mx31/mx31-regs.h index b04a718..e736052 100644 --- a/include/asm-arm/arch-mx31/mx31-regs.h +++ b/include/asm-arm/arch-mx31/mx31-regs.h @@ -34,7 +34,7 @@ #define CCM_PDR1 (CCM_BASE + 0x08) #define CCM_RCSR (CCM_BASE + 0x0c) #define CCM_MPCTL (CCM_BASE + 0x10) -#define CCM_UPCTL (CCM_BASE + 0x10) +#define CCM_UPCTL (CCM_BASE + 0x14) #define CCM_SPCTL (CCM_BASE + 0x18) #define CCM_COSR (CCM_BASE + 0x1C) #define CCM_CGR0 (CCM_BASE + 0x20) diff --git a/include/asm-arm/arch-omap3/clocks.h b/include/asm-arm/arch-omap3/clocks.h new file mode 100644 index 0000000..71a0cb6 --- /dev/null +++ b/include/asm-arm/arch-omap3/clocks.h @@ -0,0 +1,62 @@ +/* + * (C) Copyright 2006-2008 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _CLOCKS_H_ +#define _CLOCKS_H_ + +#define LDELAY 12000000 + +#define S12M 12000000 +#define S13M 13000000 +#define S19_2M 19200000 +#define S24M 24000000 +#define S26M 26000000 +#define S38_4M 38400000 + +#define FCK_IVA2_ON 0x00000001 +#define FCK_CORE1_ON 0x03fffe29 +#define ICK_CORE1_ON 0x3ffffffb +#define ICK_CORE2_ON 0x0000001f +#define FCK_WKUP_ON 0x000000e9 +#define ICK_WKUP_ON 0x0000003f +#define FCK_DSS_ON 0x00000005 +#define ICK_DSS_ON 0x00000001 +#define FCK_CAM_ON 0x00000001 +#define ICK_CAM_ON 0x00000001 +#define FCK_PER_ON 0x0003ffff +#define ICK_PER_ON 0x0003ffff + +/* Used to index into DPLL parameter tables */ +typedef struct { + unsigned int m; + unsigned int n; + unsigned int fsel; + unsigned int m2; +} dpll_param; + +/* Following functions are exported from lowlevel_init.S */ +extern dpll_param *get_mpu_dpll_param(void); +extern dpll_param *get_iva_dpll_param(void); +extern dpll_param *get_core_dpll_param(void); +extern dpll_param *get_per_dpll_param(void); + +extern void *_end_vect, *_start; + +#endif diff --git a/include/asm-arm/arch-omap3/clocks_omap3.h b/include/asm-arm/arch-omap3/clocks_omap3.h new file mode 100644 index 0000000..661407b --- /dev/null +++ b/include/asm-arm/arch-omap3/clocks_omap3.h @@ -0,0 +1,285 @@ +/* + * (C) Copyright 2006-2008 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _CLOCKS_OMAP3_H_ +#define _CLOCKS_OMAP3_H_ + +#define PLL_STOP 1 /* PER & IVA */ +#define PLL_LOW_POWER_BYPASS 5 /* MPU, IVA & CORE */ +#define PLL_FAST_RELOCK_BYPASS 6 /* CORE */ +#define PLL_LOCK 7 /* MPU, IVA, CORE & PER */ + +/* + * The following configurations are OPP and SysClk value independant + * and hence are defined here. All the other DPLL related values are + * tabulated in lowlevel_init.S. + */ + +/* CORE DPLL */ +#define CORE_M3X2 2 /* 332MHz : CM_CLKSEL1_EMU */ +#define CORE_SSI_DIV 3 /* 221MHz : CM_CLKSEL_CORE */ +#define CORE_FUSB_DIV 2 /* 41.5MHz: */ +#define CORE_L4_DIV 2 /* 83MHz : L4 */ +#define CORE_L3_DIV 2 /* 166MHz : L3 {DDR} */ +#define GFX_DIV 2 /* 83MHz : CM_CLKSEL_GFX */ +#define WKUP_RSM 2 /* 41.5MHz: CM_CLKSEL_WKUP */ + +/* PER DPLL */ +#define PER_M6X2 3 /* 288MHz: CM_CLKSEL1_EMU */ +#define PER_M5X2 4 /* 216MHz: CM_CLKSEL_CAM */ +#define PER_M4X2 2 /* 432MHz: CM_CLKSEL_DSS-dss1 */ +#define PER_M3X2 16 /* 54MHz : CM_CLKSEL_DSS-tv */ + +#define CLSEL1_EMU_VAL ((CORE_M3X2 << 16) | (PER_M6X2 << 24) | (0x0A50)) + +/* MPU DPLL */ + +#define MPU_M_12_ES1 0x0FE +#define MPU_N_12_ES1 0x07 +#define MPU_FSEL_12_ES1 0x05 +#define MPU_M2_12_ES1 0x01 + +#define MPU_M_12_ES2 0x0FA +#define MPU_N_12_ES2 0x05 +#define MPU_FSEL_12_ES2 0x07 +#define MPU_M2_ES2 0x01 + +#define MPU_M_12 0x085 +#define MPU_N_12 0x05 +#define MPU_FSEL_12 0x07 +#define MPU_M2_12 0x01 + +#define MPU_M_13_ES1 0x17D +#define MPU_N_13_ES1 0x0C +#define MPU_FSEL_13_ES1 0x03 +#define MPU_M2_13_ES1 0x01 + +#define MPU_M_13_ES2 0x1F4 +#define MPU_N_13_ES2 0x0C +#define MPU_FSEL_13_ES2 0x03 +#define MPU_M2_13_ES2 0x01 + +#define MPU_M_13 0x10A +#define MPU_N_13 0x0C +#define MPU_FSEL_13 0x03 +#define MPU_M2_13 0x01 + +#define MPU_M_19P2_ES1 0x179 +#define MPU_N_19P2_ES1 0x12 +#define MPU_FSEL_19P2_ES1 0x04 +#define MPU_M2_19P2_ES1 0x01 + +#define MPU_M_19P2_ES2 0x271 +#define MPU_N_19P2_ES2 0x17 +#define MPU_FSEL_19P2_ES2 0x03 +#define MPU_M2_19P2_ES2 0x01 + +#define MPU_M_19P2 0x14C +#define MPU_N_19P2 0x17 +#define MPU_FSEL_19P2 0x03 +#define MPU_M2_19P2 0x01 + +#define MPU_M_26_ES1 0x17D +#define MPU_N_26_ES1 0x19 +#define MPU_FSEL_26_ES1 0x03 +#define MPU_M2_26_ES1 0x01 + +#define MPU_M_26_ES2 0x0FA +#define MPU_N_26_ES2 0x0C +#define MPU_FSEL_26_ES2 0x07 +#define MPU_M2_26_ES2 0x01 + +#define MPU_M_26 0x085 +#define MPU_N_26 0x0C +#define MPU_FSEL_26 0x07 +#define MPU_M2_26 0x01 + +#define MPU_M_38P4_ES1 0x1FA +#define MPU_N_38P4_ES1 0x32 +#define MPU_FSEL_38P4_ES1 0x03 +#define MPU_M2_38P4_ES1 0x01 + +#define MPU_M_38P4_ES2 0x271 +#define MPU_N_38P4_ES2 0x2F +#define MPU_FSEL_38P4_ES2 0x03 +#define MPU_M2_38P4_ES2 0x01 + +#define MPU_M_38P4 0x14C +#define MPU_N_38P4 0x2F +#define MPU_FSEL_38P4 0x03 +#define MPU_M2_38P4 0x01 + +/* IVA DPLL */ + +#define IVA_M_12_ES1 0x07D +#define IVA_N_12_ES1 0x05 +#define IVA_FSEL_12_ES1 0x07 +#define IVA_M2_12_ES1 0x01 + +#define IVA_M_12_ES2 0x0B4 +#define IVA_N_12_ES2 0x05 +#define IVA_FSEL_12_ES2 0x07 +#define IVA_M2_12_ES2 0x01 + +#define IVA_M_12 0x085 +#define IVA_N_12 0x05 +#define IVA_FSEL_12 0x07 +#define IVA_M2_12 0x01 + +#define IVA_M_13_ES1 0x0FA +#define IVA_N_13_ES1 0x0C +#define IVA_FSEL_13_ES1 0x03 +#define IVA_M2_13_ES1 0x01 + +#define IVA_M_13_ES2 0x168 +#define IVA_N_13_ES2 0x0C +#define IVA_FSEL_13_ES2 0x03 +#define IVA_M2_13_ES2 0x01 + +#define IVA_M_13 0x10A +#define IVA_N_13 0x0C +#define IVA_FSEL_13 0x03 +#define IVA_M2_13 0x01 + +#define IVA_M_19P2_ES1 0x082 +#define IVA_N_19P2_ES1 0x09 +#define IVA_FSEL_19P2_ES1 0x07 +#define IVA_M2_19P2_ES1 0x01 + +#define IVA_M_19P2_ES2 0x0E1 +#define IVA_N_19P2_ES2 0x0B +#define IVA_FSEL_19P2_ES2 0x06 +#define IVA_M2_19P2_ES2 0x01 + +#define IVA_M_19P2 0x14C +#define IVA_N_19P2 0x17 +#define IVA_FSEL_19P2 0x03 +#define IVA_M2_19P2 0x01 + +#define IVA_M_26_ES1 0x07D +#define IVA_N_26_ES1 0x0C +#define IVA_FSEL_26_ES1 0x07 +#define IVA_M2_26_ES1 0x01 + +#define IVA_M_26_ES2 0x0B4 +#define IVA_N_26_ES2 0x0C +#define IVA_FSEL_26_ES2 0x07 +#define IVA_M2_26_ES2 0x01 + +#define IVA_M_26 0x085 +#define IVA_N_26 0x0C +#define IVA_FSEL_26 0x07 +#define IVA_M2_26 0x01 + +#define IVA_M_38P4_ES1 0x13F +#define IVA_N_38P4_ES1 0x30 +#define IVA_FSEL_38P4_ES1 0x03 +#define IVA_M2_38P4_ES1 0x01 + +#define IVA_M_38P4_ES2 0x0E1 +#define IVA_N_38P4_ES2 0x17 +#define IVA_FSEL_38P4_ES2 0x06 +#define IVA_M2_38P4_ES2 0x01 + +#define IVA_M_38P4 0x14C +#define IVA_N_38P4 0x2F +#define IVA_FSEL_38P4 0x03 +#define IVA_M2_38P4 0x01 + +/* CORE DPLL */ + +#define CORE_M_12 0xA6 +#define CORE_N_12 0x05 +#define CORE_FSEL_12 0x07 +#define CORE_M2_12 0x01 /* M3 of 2 */ + +#define CORE_M_12_ES1 0x19F +#define CORE_N_12_ES1 0x0E +#define CORE_FSL_12_ES1 0x03 +#define CORE_M2_12_ES1 0x1 /* M3 of 2 */ + +#define CORE_M_13 0x14C +#define CORE_N_13 0x0C +#define CORE_FSEL_13 0x03 +#define CORE_M2_13 0x01 /* M3 of 2 */ + +#define CORE_M_13_ES1 0x1B2 +#define CORE_N_13_ES1 0x10 +#define CORE_FSL_13_ES1 0x03 +#define CORE_M2_13_ES1 0x01 /* M3 of 2 */ + +#define CORE_M_19P2 0x19F +#define CORE_N_19P2 0x17 +#define CORE_FSEL_19P2 0x03 +#define CORE_M2_19P2 0x01 /* M3 of 2 */ + +#define CORE_M_19P2_ES1 0x19F +#define CORE_N_19P2_ES1 0x17 +#define CORE_FSL_19P2_ES1 0x03 +#define CORE_M2_19P2_ES1 0x01 /* M3 of 2 */ + +#define CORE_M_26 0xA6 +#define CORE_N_26 0x0C +#define CORE_FSEL_26 0x07 +#define CORE_M2_26 0x01 /* M3 of 2 */ + +#define CORE_M_26_ES1 0x1B2 +#define CORE_N_26_ES1 0x21 +#define CORE_FSL_26_ES1 0x03 +#define CORE_M2_26_ES1 0x01 /* M3 of 2 */ + +#define CORE_M_38P4 0x19F +#define CORE_N_38P4 0x2F +#define CORE_FSEL_38P4 0x03 +#define CORE_M2_38P4 0x01 /* M3 of 2 */ + +#define CORE_M_38P4_ES1 0x19F +#define CORE_N_38P4_ES1 0x2F +#define CORE_FSL_38P4_ES1 0x03 +#define CORE_M2_38P4_ES1 0x01 /* M3 of 2 */ + +/* PER DPLL */ + +#define PER_M_12 0xD8 +#define PER_N_12 0x05 +#define PER_FSEL_12 0x07 +#define PER_M2_12 0x09 + +#define PER_M_13 0x1B0 +#define PER_N_13 0x0C +#define PER_FSEL_13 0x03 +#define PER_M2_13 0x09 + +#define PER_M_19P2 0xE1 +#define PER_N_19P2 0x09 +#define PER_FSEL_19P2 0x07 +#define PER_M2_19P2 0x09 + +#define PER_M_26 0xD8 +#define PER_N_26 0x0C +#define PER_FSEL_26 0x07 +#define PER_M2_26 0x09 + +#define PER_M_38P4 0xE1 +#define PER_N_38P4 0x13 +#define PER_FSEL_38P4 0x07 +#define PER_M2_38P4 0x09 + +#endif /* endif _CLOCKS_OMAP3_H_ */ diff --git a/include/asm-arm/arch-omap3/cpu.h b/include/asm-arm/arch-omap3/cpu.h new file mode 100644 index 0000000..69c0b36 --- /dev/null +++ b/include/asm-arm/arch-omap3/cpu.h @@ -0,0 +1,402 @@ +/* + * (C) Copyright 2006-2008 + * Texas Instruments, <www.ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef _CPU_H +#define _CPU_H + +/* Register offsets of common modules */ +/* Control */ +#ifndef __ASSEMBLY__ +typedef struct ctrl { + unsigned char res1[0xC0]; + unsigned short gpmc_nadv_ale; /* 0xC0 */ + unsigned short gpmc_noe; /* 0xC2 */ + unsigned short gpmc_nwe; /* 0xC4 */ + unsigned char res2[0x22A]; + unsigned int status; /* 0x2F0 */ +} ctrl_t; +#else /* __ASSEMBLY__ */ +#define CONTROL_STATUS 0x2F0 +#endif /* __ASSEMBLY__ */ + +/* device type */ +#define DEVICE_MASK (0x7 << 8) +#define SYSBOOT_MASK 0x1F +#define TST_DEVICE 0x0 +#define EMU_DEVICE 0x1 +#define HS_DEVICE 0x2 +#define GP_DEVICE 0x3 + +/* GPMC CS3/cs4/cs6 not avaliable */ +#define GPMC_BASE (OMAP34XX_GPMC_BASE) +#define GPMC_CONFIG_CS0 0x60 +#define GPMC_CONFIG_CS6 0x150 +#define GPMC_CONFIG_CS0_BASE (GPMC_BASE + GPMC_CONFIG_CS0) +#define GPMC_CONFIG_CS6_BASE (GPMC_BASE + GPMC_CONFIG_CS6) +#define GPMC_CONFIG_WP 0x10 + +#define GPMC_CONFIG_WIDTH 0x30 + +#ifndef __ASSEMBLY__ +typedef struct gpmc { + unsigned char res1[0x10]; + unsigned int sysconfig; /* 0x10 */ + unsigned char res2[0x4]; + unsigned int irqstatus; /* 0x18 */ + unsigned int irqenable; /* 0x1C */ + unsigned char res3[0x20]; + unsigned int timeout_control; /* 0x40 */ + unsigned char res4[0xC]; + unsigned int config; /* 0x50 */ + unsigned int status; /* 0x54 */ + unsigned char res5[0x19C]; + unsigned int ecc_config; /* 0x1F4 */ + unsigned int ecc_control; /* 0x1F8 */ + unsigned int ecc_size_config; /* 0x1FC */ + unsigned int ecc1_result; /* 0x200 */ + unsigned int ecc2_result; /* 0x204 */ + unsigned int ecc3_result; /* 0x208 */ + unsigned int ecc4_result; /* 0x20C */ + unsigned int ecc5_result; /* 0x210 */ + unsigned int ecc6_result; /* 0x214 */ + unsigned int ecc7_result; /* 0x218 */ + unsigned int ecc8_result; /* 0x21C */ + unsigned int ecc9_result; /* 0x220 */ +} gpmc_t; + +typedef struct gpmc_csx { + unsigned int config1; /* 0x00 */ + unsigned int config2; /* 0x04 */ + unsigned int config3; /* 0x08 */ + unsigned int config4; /* 0x0C */ + unsigned int config5; /* 0x10 */ + unsigned int config6; /* 0x14 */ + unsigned int config7; /* 0x18 */ + unsigned int nand_cmd; /* 0x1C */ + unsigned int nand_adr; /* 0x20 */ + unsigned int nand_dat; /* 0x24 */ +} gpmc_csx_t; +#else /* __ASSEMBLY__ */ +#define GPMC_CONFIG1 0x00 +#define GPMC_CONFIG2 0x04 +#define GPMC_CONFIG3 0x08 +#define GPMC_CONFIG4 0x0C +#define GPMC_CONFIG5 0x10 +#define GPMC_CONFIG6 0x14 +#define GPMC_CONFIG7 0x18 +#endif /* __ASSEMBLY__ */ + +/* GPMC Mapping */ +#define FLASH_BASE 0x10000000 /* NOR flash, */ + /* aligned to 256 Meg */ +#define FLASH_BASE_SDPV1 0x04000000 /* NOR flash, */ + /* aligned to 64 Meg */ +#define FLASH_BASE_SDPV2 0x10000000 /* NOR flash, */ + /* aligned to 256 Meg */ +#define DEBUG_BASE 0x08000000 /* debug board */ +#define NAND_BASE 0x30000000 /* NAND addr */ + /* (actual size small port) */ +#define PISMO2_BASE 0x18000000 /* PISMO2 CS1/2 */ +#define ONENAND_MAP 0x20000000 /* OneNand addr */ + /* (actual size small port) */ +/* SMS */ +#ifndef __ASSEMBLY__ +typedef struct sms { + unsigned char res1[0x10]; + unsigned int sysconfig; /* 0x10 */ + unsigned char res2[0x34]; + unsigned int rg_att0; /* 0x48 */ + unsigned char res3[0x84]; + unsigned int class_arb0; /* 0xD0 */ +} sms_t; +#endif /* __ASSEMBLY__ */ + +#define BURSTCOMPLETE_GROUP7 (0x1 << 31) + +/* SDRC */ +#ifndef __ASSEMBLY__ +typedef struct sdrc_cs { + unsigned int mcfg; /* 0x80 || 0xB0 */ + unsigned int mr; /* 0x84 || 0xB4 */ + unsigned char res1[0x4]; + unsigned int emr2; /* 0x8C || 0xBC */ + unsigned char res2[0x14]; + unsigned int rfr_ctrl; /* 0x84 || 0xD4 */ + unsigned int manual; /* 0xA8 || 0xD8 */ + unsigned char res3[0x4]; +} sdrc_cs_t; + +typedef struct sdrc_actim { + unsigned int ctrla; /* 0x9C || 0xC4 */ + unsigned int ctrlb; /* 0xA0 || 0xC8 */ +} sdrc_actim_t; + +typedef struct sdrc { + unsigned char res1[0x10]; + unsigned int sysconfig; /* 0x10 */ + unsigned int status; /* 0x14 */ + unsigned char res2[0x28]; + unsigned int cs_cfg; /* 0x40 */ + unsigned int sharing; /* 0x44 */ + unsigned char res3[0x18]; + unsigned int dlla_ctrl; /* 0x60 */ + unsigned int dlla_status; /* 0x64 */ + unsigned int dllb_ctrl; /* 0x68 */ + unsigned int dllb_status; /* 0x6C */ + unsigned int power; /* 0x70 */ + unsigned char res4[0xC]; + sdrc_cs_t cs[2]; /* 0x80 || 0xB0 */ +} sdrc_t; +#endif /* __ASSEMBLY__ */ + +#define DLLPHASE_90 (0x1 << 1) +#define LOADDLL (0x1 << 2) +#define ENADLL (0x1 << 3) +#define DLL_DELAY_MASK 0xFF00 +#define DLL_NO_FILTER_MASK ((0x1 << 9) | (0x1 << 8)) + +#define PAGEPOLICY_HIGH (0x1 << 0) +#define SRFRONRESET (0x1 << 7) +#define WAKEUPPROC (0x1 << 26) + +#define DDR_SDRAM (0x1 << 0) +#define DEEPPD (0x1 << 3) +#define B32NOT16 (0x1 << 4) +#define BANKALLOCATION (0x2 << 6) +#define RAMSIZE_128 (0x40 << 8) /* RAM size in 2MB chunks */ +#define ADDRMUXLEGACY (0x1 << 19) +#define CASWIDTH_10BITS (0x5 << 20) +#define RASWIDTH_13BITS (0x2 << 24) +#define BURSTLENGTH4 (0x2 << 0) +#define CASL3 (0x3 << 4) +#define SDRC_ACTIM_CTRL0_BASE (OMAP34XX_SDRC_BASE + 0x9C) +#define SDRC_ACTIM_CTRL1_BASE (OMAP34XX_SDRC_BASE + 0xC4) +#define ARE_ARCV_1 (0x1 << 0) +#define ARCV (0x4e2 << 8) /* Autorefresh count */ +#define OMAP34XX_SDRC_CS0 0x80000000 +#define OMAP34XX_SDRC_CS1 0xA0000000 +#define CMD_NOP 0x0 +#define CMD_PRECHARGE 0x1 +#define CMD_AUTOREFRESH 0x2 +#define CMD_ENTR_PWRDOWN 0x3 +#define CMD_EXIT_PWRDOWN 0x4 +#define CMD_ENTR_SRFRSH 0x5 +#define CMD_CKE_HIGH 0x6 +#define CMD_CKE_LOW 0x7 +#define SOFTRESET (0x1 << 1) +#define SMART_IDLE (0x2 << 3) +#define REF_ON_IDLE (0x1 << 6) + +/* timer regs offsets (32 bit regs) */ + +#ifndef __ASSEMBLY__ +typedef struct gptimer { + unsigned int tidr; /* 0x00 r */ + unsigned char res[0xc]; + unsigned int tiocp_cfg; /* 0x10 rw */ + unsigned int tistat; /* 0x14 r */ + unsigned int tisr; /* 0x18 rw */ + unsigned int tier; /* 0x1c rw */ + unsigned int twer; /* 0x20 rw */ + unsigned int tclr; /* 0x24 rw */ + unsigned int tcrr; /* 0x28 rw */ + unsigned int tldr; /* 0x2c rw */ + unsigned int ttgr; /* 0x30 rw */ + unsigned int twpc; /* 0x34 r*/ + unsigned int tmar; /* 0x38 rw*/ + unsigned int tcar1; /* 0x3c r */ + unsigned int tcicr; /* 0x40 rw */ + unsigned int tcar2; /* 0x44 r */ +} gptimer_t; +#endif /* __ASSEMBLY__ */ + +/* enable sys_clk NO-prescale /1 */ +#define GPT_EN ((0x0 << 2) | (0x1 << 1) | (0x1 << 0)) + +/* Watchdog */ +#ifndef __ASSEMBLY__ +typedef struct watchdog { + unsigned char res1[0x34]; + unsigned int wwps; /* 0x34 r */ + unsigned char res2[0x10]; + unsigned int wspr; /* 0x48 rw */ +} watchdog_t; +#endif /* __ASSEMBLY__ */ + +#define WD_UNLOCK1 0xAAAA +#define WD_UNLOCK2 0x5555 + +/* PRCM */ +#define PRCM_BASE 0x48004000 + +#ifndef __ASSEMBLY__ +typedef struct prcm { + unsigned int fclken_iva2; /* 0x00 */ + unsigned int clken_pll_iva2; /* 0x04 */ + unsigned char res1[0x1c]; + unsigned int idlest_pll_iva2; /* 0x24 */ + unsigned char res2[0x18]; + unsigned int clksel1_pll_iva2 ; /* 0x40 */ + unsigned int clksel2_pll_iva2; /* 0x44 */ + unsigned char res3[0x8bc]; + unsigned int clken_pll_mpu; /* 0x904 */ + unsigned char res4[0x1c]; + unsigned int idlest_pll_mpu; /* 0x924 */ + unsigned char res5[0x18]; + unsigned int clksel1_pll_mpu; /* 0x940 */ + unsigned int clksel2_pll_mpu; /* 0x944 */ + unsigned char res6[0xb8]; + unsigned int fclken1_core; /* 0xa00 */ + unsigned char res7[0xc]; + unsigned int iclken1_core; /* 0xa10 */ + unsigned int iclken2_core; /* 0xa14 */ + unsigned char res8[0x28]; + unsigned int clksel_core; /* 0xa40 */ + unsigned char res9[0xbc]; + unsigned int fclken_gfx; /* 0xb00 */ + unsigned char res10[0xc]; + unsigned int iclken_gfx; /* 0xb10 */ + unsigned char res11[0x2c]; + unsigned int clksel_gfx; /* 0xb40 */ + unsigned char res12[0xbc]; + unsigned int fclken_wkup; /* 0xc00 */ + unsigned char res13[0xc]; + unsigned int iclken_wkup; /* 0xc10 */ + unsigned char res14[0xc]; + unsigned int idlest_wkup; /* 0xc20 */ + unsigned char res15[0x1c]; + unsigned int clksel_wkup; /* 0xc40 */ + unsigned char res16[0xbc]; + unsigned int clken_pll; /* 0xd00 */ + unsigned char res17[0x1c]; + unsigned int idlest_ckgen; /* 0xd20 */ + unsigned char res18[0x1c]; + unsigned int clksel1_pll; /* 0xd40 */ + unsigned int clksel2_pll; /* 0xd44 */ + unsigned int clksel3_pll; /* 0xd48 */ + unsigned char res19[0xb4]; + unsigned int fclken_dss; /* 0xe00 */ + unsigned char res20[0xc]; + unsigned int iclken_dss; /* 0xe10 */ + unsigned char res21[0x2c]; + unsigned int clksel_dss; /* 0xe40 */ + unsigned char res22[0xbc]; + unsigned int fclken_cam; /* 0xf00 */ + unsigned char res23[0xc]; + unsigned int iclken_cam; /* 0xf10 */ + unsigned char res24[0x2c]; + unsigned int clksel_cam; /* 0xf40 */ + unsigned char res25[0xbc]; + unsigned int fclken_per; /* 0x1000 */ + unsigned char res26[0xc]; + unsigned int iclken_per; /* 0x1010 */ + unsigned char res27[0x2c]; + unsigned int clksel_per; /* 0x1040 */ + unsigned char res28[0xfc]; + unsigned int clksel1_emu; /* 0x1140 */ +} prcm_t; +#else /* __ASSEMBLY__ */ +#define CM_CLKSEL_CORE 0x48004a40 +#define CM_CLKSEL_GFX 0x48004b40 +#define CM_CLKSEL_WKUP 0x48004c40 +#define CM_CLKEN_PLL 0x48004d00 +#define CM_CLKSEL1_PLL 0x48004d40 +#define CM_CLKSEL1_EMU 0x48005140 +#endif /* __ASSEMBLY__ */ + +#define PRM_BASE 0x48306000 + +#ifndef __ASSEMBLY__ +typedef struct prm { + unsigned char res1[0xd40]; + unsigned int clksel; /* 0xd40 */ + unsigned char res2[0x50c]; + unsigned int rstctrl; /* 0x1250 */ + unsigned char res3[0x1c]; + unsigned int clksrc_ctrl; /* 0x1270 */ +} prm_t; +#else /* __ASSEMBLY__ */ +#define PRM_RSTCTRL 0x48307250 +#endif /* __ASSEMBLY__ */ + +#define SYSCLKDIV_1 (0x1 << 6) +#define SYSCLKDIV_2 (0x1 << 7) + +#define CLKSEL_GPT1 (0x1 << 0) + +#define EN_GPT1 (0x1 << 0) +#define EN_32KSYNC (0x1 << 2) + +#define ST_WDT2 (0x1 << 5) + +#define ST_MPU_CLK (0x1 << 0) + +#define ST_CORE_CLK (0x1 << 0) + +#define ST_PERIPH_CLK (0x1 << 1) + +#define ST_IVA2_CLK (0x1 << 0) + +#define RESETDONE (0x1 << 0) + +#define TCLR_ST (0x1 << 0) +#define TCLR_AR (0x1 << 1) +#define TCLR_PRE (0x1 << 5) + +/* SMX-APE */ +#define PM_RT_APE_BASE_ADDR_ARM (SMX_APE_BASE + 0x10000) +#define PM_GPMC_BASE_ADDR_ARM (SMX_APE_BASE + 0x12400) +#define PM_OCM_RAM_BASE_ADDR_ARM (SMX_APE_BASE + 0x12800) +#define PM_IVA2_BASE_ADDR_ARM (SMX_APE_BASE + 0x14000) + +#ifndef __ASSEMBLY__ +typedef struct pm { + unsigned char res1[0x48]; + unsigned int req_info_permission_0; /* 0x48 */ + unsigned char res2[0x4]; + unsigned int read_permission_0; /* 0x50 */ + unsigned char res3[0x4]; + unsigned int wirte_permission_0; /* 0x58 */ + unsigned char res4[0x4]; + unsigned int addr_match_1; /* 0x58 */ + unsigned char res5[0x4]; + unsigned int req_info_permission_1; /* 0x68 */ + unsigned char res6[0x14]; + unsigned int addr_match_2; /* 0x80 */ +} pm_t; +#endif /*__ASSEMBLY__ */ + +/* Permission values for registers -Full fledged permissions to all */ +#define UNLOCK_1 0xFFFFFFFF +#define UNLOCK_2 0x00000000 +#define UNLOCK_3 0x0000FFFF + +#define NOT_EARLY 0 + +/* I2C base */ +#define I2C_BASE1 (OMAP34XX_CORE_L4_IO_BASE + 0x70000) +#define I2C_BASE2 (OMAP34XX_CORE_L4_IO_BASE + 0x72000) +#define I2C_BASE3 (OMAP34XX_CORE_L4_IO_BASE + 0x60000) + +#endif /* _CPU_H */ diff --git a/include/asm-arm/arch-omap3/i2c.h b/include/asm-arm/arch-omap3/i2c.h new file mode 100644 index 0000000..3937f35 --- /dev/null +++ b/include/asm-arm/arch-omap3/i2c.h @@ -0,0 +1,128 @@ +/* + * (C) Copyright 2004-2008 + * Texas Instruments, <www.ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _I2C_H_ +#define _I2C_H_ + +#define I2C_DEFAULT_BASE I2C_BASE1 + +#define I2C_REV (I2C_DEFAULT_BASE + 0x00) +#define I2C_IE (I2C_DEFAULT_BASE + 0x04) +#define I2C_STAT (I2C_DEFAULT_BASE + 0x08) +#define I2C_IV (I2C_DEFAULT_BASE + 0x0c) +#define I2C_BUF (I2C_DEFAULT_BASE + 0x14) +#define I2C_CNT (I2C_DEFAULT_BASE + 0x18) +#define I2C_DATA (I2C_DEFAULT_BASE + 0x1c) +#define I2C_SYSC (I2C_DEFAULT_BASE + 0x20) +#define I2C_CON (I2C_DEFAULT_BASE + 0x24) +#define I2C_OA (I2C_DEFAULT_BASE + 0x28) +#define I2C_SA (I2C_DEFAULT_BASE + 0x2c) +#define I2C_PSC (I2C_DEFAULT_BASE + 0x30) +#define I2C_SCLL (I2C_DEFAULT_BASE + 0x34) +#define I2C_SCLH (I2C_DEFAULT_BASE + 0x38) +#define I2C_SYSTEST (I2C_DEFAULT_BASE + 0x3c) + +/* I2C masks */ + +/* I2C Interrupt Enable Register (I2C_IE): */ +#define I2C_IE_GC_IE (1 << 5) +#define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */ +#define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */ +#define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */ +#define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */ +#define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */ + +/* I2C Status Register (I2C_STAT): */ + +#define I2C_STAT_SBD (1 << 15) /* Single byte data */ +#define I2C_STAT_BB (1 << 12) /* Bus busy */ +#define I2C_STAT_ROVR (1 << 11) /* Receive overrun */ +#define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */ +#define I2C_STAT_AAS (1 << 9) /* Address as slave */ +#define I2C_STAT_GC (1 << 5) +#define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */ +#define I2C_STAT_RRDY (1 << 3) /* Receive data ready */ +#define I2C_STAT_ARDY (1 << 2) /* Register access ready */ +#define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */ +#define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */ + +/* I2C Interrupt Code Register (I2C_INTCODE): */ + +#define I2C_INTCODE_MASK 7 +#define I2C_INTCODE_NONE 0 +#define I2C_INTCODE_AL 1 /* Arbitration lost */ +#define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */ +#define I2C_INTCODE_ARDY 3 /* Register access ready */ +#define I2C_INTCODE_RRDY 4 /* Rcv data ready */ +#define I2C_INTCODE_XRDY 5 /* Xmit data ready */ + +/* I2C Buffer Configuration Register (I2C_BUF): */ + +#define I2C_BUF_RDMA_EN (1 << 15) /* Receive DMA channel enable */ +#define I2C_BUF_XDMA_EN (1 << 7) /* Transmit DMA channel enable */ + +/* I2C Configuration Register (I2C_CON): */ + +#define I2C_CON_EN (1 << 15) /* I2C module enable */ +#define I2C_CON_BE (1 << 14) /* Big endian mode */ +#define I2C_CON_STB (1 << 11) /* Start byte mode (master mode only) */ +#define I2C_CON_MST (1 << 10) /* Master/slave mode */ +#define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode */ + /* (master mode only) */ +#define I2C_CON_XA (1 << 8) /* Expand address */ +#define I2C_CON_STP (1 << 1) /* Stop condition (master mode only) */ +#define I2C_CON_STT (1 << 0) /* Start condition (master mode only) */ + +/* I2C System Test Register (I2C_SYSTEST): */ + +#define I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */ +#define I2C_SYSTEST_FREE (1 << 14) /* Free running mode, on brkpoint) */ +#define I2C_SYSTEST_TMODE_MASK (3 << 12) /* Test mode select */ +#define I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */ +#define I2C_SYSTEST_SCL_I (1 << 3) /* SCL line sense input value */ +#define I2C_SYSTEST_SCL_O (1 << 2) /* SCL line drive output value */ +#define I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense input value */ +#define I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive output value */ + +#define I2C_SCLL_SCLL 0 +#define I2C_SCLL_SCLL_M 0xFF +#define I2C_SCLL_HSSCLL 8 +#define I2C_SCLH_HSSCLL_M 0xFF +#define I2C_SCLH_SCLH 0 +#define I2C_SCLH_SCLH_M 0xFF +#define I2C_SCLH_HSSCLH 8 +#define I2C_SCLH_HSSCLH_M 0xFF + +#define OMAP_I2C_STANDARD 100 +#define OMAP_I2C_FAST_MODE 400 +#define OMAP_I2C_HIGH_SPEED 3400 + +#define SYSTEM_CLOCK_12 12000 +#define SYSTEM_CLOCK_13 13000 +#define SYSTEM_CLOCK_192 19200 +#define SYSTEM_CLOCK_96 96000 + +#define I2C_IP_CLK SYSTEM_CLOCK_96 +#define I2C_PSC_MAX 0x0f +#define I2C_PSC_MIN 0x00 + +#endif /* _I2C_H_ */ diff --git a/include/asm-arm/arch-omap3/mem.h b/include/asm-arm/arch-omap3/mem.h new file mode 100644 index 0000000..6f0f90b --- /dev/null +++ b/include/asm-arm/arch-omap3/mem.h @@ -0,0 +1,227 @@ +/* + * (C) Copyright 2006-2008 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _MEM_H_ +#define _MEM_H_ + +#define CS0 0x0 +#define CS1 0x1 /* mirror CS1 regs appear offset 0x30 from CS0 */ + +#ifndef __ASSEMBLY__ +typedef enum { + STACKED = 0, + IP_DDR = 1, + COMBO_DDR = 2, + IP_SDR = 3, +} mem_t; +#endif /* __ASSEMBLY__ */ + +#define EARLY_INIT 1 + +/* Slower full frequency range default timings for x32 operation*/ +#define SDP_SDRC_SHARING 0x00000100 +#define SDP_SDRC_MR_0_SDR 0x00000031 + +/* optimized timings good for current shipping parts */ +#define SDP_3430_SDRC_RFR_CTRL_165MHz 0x0004e201 /* 7.8us/6ns - 50=0x4e2 */ + +#define DLL_OFFSET 0 +#define DLL_WRITEDDRCLKX2DIS 1 +#define DLL_ENADLL 1 +#define DLL_LOCKDLL 0 +#define DLL_DLLPHASE_72 0 +#define DLL_DLLPHASE_90 1 + +/* rkw - need to find of 90/72 degree recommendation for speed like before */ +#define SDP_SDRC_DLLAB_CTRL ((DLL_ENADLL << 3) | \ + (DLL_LOCKDLL << 2) | (DLL_DLLPHASE_90 << 1)) + +/* Infineon part of 3430SDP (165MHz optimized) 6.06ns + * ACTIMA + * TDAL = Twr/Tck + Trp/tck = 15/6 + 18/6 = 2.5 + 3 = 5.5 -> 6 + * TDPL (Twr) = 15/6 = 2.5 -> 3 + * TRRD = 12/6 = 2 + * TRCD = 18/6 = 3 + * TRP = 18/6 = 3 + * TRAS = 42/6 = 7 + * TRC = 60/6 = 10 + * TRFC = 72/6 = 12 + * ACTIMB + * TCKE = 2 + * XSR = 120/6 = 20 + */ +#define TDAL_165 6 +#define TDPL_165 3 +#define TRRD_165 2 +#define TRCD_165 3 +#define TRP_165 3 +#define TRAS_165 7 +#define TRC_165 10 +#define TRFC_165 21 +#define V_ACTIMA_165 ((TRFC_165 << 27) | (TRC_165 << 22) | \ + (TRAS_165 << 18) | (TRP_165 << 15) | \ + (TRCD_165 << 12) | (TRRD_165 << 9) | \ + (TDPL_165 << 6) | (TDAL_165)) + +#define TWTR_165 1 +#define TCKE_165 1 +#define TXP_165 5 +#define XSR_165 23 +#define V_ACTIMB_165 (((TCKE_165 << 12) | (XSR_165 << 0)) | \ + (TXP_165 << 8) | (TWTR_165 << 16)) + +#define SDP_SDRC_ACTIM_CTRLA_0 V_ACTIMA_165 +#define SDP_SDRC_ACTIM_CTRLB_0 V_ACTIMB_165 +#define SDP_SDRC_RFR_CTRL SDP_3430_SDRC_RFR_CTRL_165MHz + +/* + * GPMC settings - + * Definitions is as per the following format + * #define <PART>_GPMC_CONFIG<x> <value> + * Where: + * PART is the part name e.g. STNOR - Intel Strata Flash + * x is GPMC config registers from 1 to 6 (there will be 6 macros) + * Value is corresponding value + * + * For every valid PRCM configuration there should be only one definition of + * the same. if values are independent of the board, this definition will be + * present in this file if values are dependent on the board, then this should + * go into corresponding mem-boardName.h file + * + * Currently valid part Names are (PART): + * STNOR - Intel Strata Flash + * SMNAND - Samsung NAND + * MPDB - H4 MPDB board + * SBNOR - Sibley NOR + * MNAND - Micron Large page x16 NAND + * ONNAND - Samsung One NAND + * + * include/configs/file.h contains the defn - for all CS we are interested + * #define OMAP34XX_GPMC_CSx PART + * #define OMAP34XX_GPMC_CSx_SIZE Size + * #define OMAP34XX_GPMC_CSx_MAP Map + * Where: + * x - CS number + * PART - Part Name as defined above + * SIZE - how big is the mapping to be + * GPMC_SIZE_128M - 0x8 + * GPMC_SIZE_64M - 0xC + * GPMC_SIZE_32M - 0xE + * GPMC_SIZE_16M - 0xF + * MAP - Map this CS to which address(GPMC address space)- Absolute address + * >>24 before being used. + */ +#define GPMC_SIZE_128M 0x8 +#define GPMC_SIZE_64M 0xC +#define GPMC_SIZE_32M 0xE +#define GPMC_SIZE_16M 0xF + +#define SMNAND_GPMC_CONFIG1 0x00000800 +#define SMNAND_GPMC_CONFIG2 0x00141400 +#define SMNAND_GPMC_CONFIG3 0x00141400 +#define SMNAND_GPMC_CONFIG4 0x0F010F01 +#define SMNAND_GPMC_CONFIG5 0x010C1414 +#define SMNAND_GPMC_CONFIG6 0x1F0F0A80 +#define SMNAND_GPMC_CONFIG7 0x00000C44 + +#define M_NAND_GPMC_CONFIG1 0x00001800 +#define M_NAND_GPMC_CONFIG2 0x00141400 +#define M_NAND_GPMC_CONFIG3 0x00141400 +#define M_NAND_GPMC_CONFIG4 0x0F010F01 +#define M_NAND_GPMC_CONFIG5 0x010C1414 +#define M_NAND_GPMC_CONFIG6 0x1f0f0A80 +#define M_NAND_GPMC_CONFIG7 0x00000C44 + +#define STNOR_GPMC_CONFIG1 0x3 +#define STNOR_GPMC_CONFIG2 0x00151501 +#define STNOR_GPMC_CONFIG3 0x00060602 +#define STNOR_GPMC_CONFIG4 0x11091109 +#define STNOR_GPMC_CONFIG5 0x01141F1F +#define STNOR_GPMC_CONFIG6 0x000004c4 + +#define SIBNOR_GPMC_CONFIG1 0x1200 +#define SIBNOR_GPMC_CONFIG2 0x001f1f00 +#define SIBNOR_GPMC_CONFIG3 0x00080802 +#define SIBNOR_GPMC_CONFIG4 0x1C091C09 +#define SIBNOR_GPMC_CONFIG5 0x01131F1F +#define SIBNOR_GPMC_CONFIG6 0x1F0F03C2 + +#define SDPV2_MPDB_GPMC_CONFIG1 0x00611200 +#define SDPV2_MPDB_GPMC_CONFIG2 0x001F1F01 +#define SDPV2_MPDB_GPMC_CONFIG3 0x00080803 +#define SDPV2_MPDB_GPMC_CONFIG4 0x1D091D09 +#define SDPV2_MPDB_GPMC_CONFIG5 0x041D1F1F +#define SDPV2_MPDB_GPMC_CONFIG6 0x1D0904C4 + +#define MPDB_GPMC_CONFIG1 0x00011000 +#define MPDB_GPMC_CONFIG2 0x001f1f01 +#define MPDB_GPMC_CONFIG3 0x00080803 +#define MPDB_GPMC_CONFIG4 0x1c0b1c0a +#define MPDB_GPMC_CONFIG5 0x041f1F1F +#define MPDB_GPMC_CONFIG6 0x1F0F04C4 + +#define P2_GPMC_CONFIG1 0x0 +#define P2_GPMC_CONFIG2 0x0 +#define P2_GPMC_CONFIG3 0x0 +#define P2_GPMC_CONFIG4 0x0 +#define P2_GPMC_CONFIG5 0x0 +#define P2_GPMC_CONFIG6 0x0 + +#define ONENAND_GPMC_CONFIG1 0x00001200 +#define ONENAND_GPMC_CONFIG2 0x000F0F01 +#define ONENAND_GPMC_CONFIG3 0x00030301 +#define ONENAND_GPMC_CONFIG4 0x0F040F04 +#define ONENAND_GPMC_CONFIG5 0x010F1010 +#define ONENAND_GPMC_CONFIG6 0x1F060000 + +#define NET_GPMC_CONFIG1 0x00001000 +#define NET_GPMC_CONFIG2 0x001e1e01 +#define NET_GPMC_CONFIG3 0x00080300 +#define NET_GPMC_CONFIG4 0x1c091c09 +#define NET_GPMC_CONFIG5 0x04181f1f +#define NET_GPMC_CONFIG6 0x00000FCF +#define NET_GPMC_CONFIG7 0x00000f6c + +/* max number of GPMC Chip Selects */ +#define GPMC_MAX_CS 8 +/* max number of GPMC regs */ +#define GPMC_MAX_REG 7 + +#define PISMO1_NOR 1 +#define PISMO1_NAND 2 +#define PISMO2_CS0 3 +#define PISMO2_CS1 4 +#define PISMO1_ONENAND 5 +#define DBG_MPDB 6 +#define PISMO2_NAND_CS0 7 +#define PISMO2_NAND_CS1 8 + +/* make it readable for the gpmc_init */ +#define PISMO1_NOR_BASE FLASH_BASE +#define PISMO1_NAND_BASE NAND_BASE +#define PISMO2_CS0_BASE PISMO2_MAP1 +#define PISMO1_ONEN_BASE ONENAND_MAP +#define DBG_MPDB_BASE DEBUG_BASE + +#endif /* endif _MEM_H_ */ diff --git a/include/asm-arm/arch-omap3/mmc.h b/include/asm-arm/arch-omap3/mmc.h new file mode 100644 index 0000000..55584d9 --- /dev/null +++ b/include/asm-arm/arch-omap3/mmc.h @@ -0,0 +1,235 @@ +/* + * (C) Copyright 2008 + * Texas Instruments, <www.ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation's version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef MMC_H +#define MMC_H + +#include "mmc_host_def.h" + +/* Responses */ +#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK) +#define RSP_TYPE_R1 (RSP_TYPE_LGHT48 | CCCE_CHECK | CICE_CHECK) +#define RSP_TYPE_R1B (RSP_TYPE_LGHT48B | CCCE_CHECK | CICE_CHECK) +#define RSP_TYPE_R2 (RSP_TYPE_LGHT136 | CCCE_CHECK | CICE_NOCHECK) +#define RSP_TYPE_R3 (RSP_TYPE_LGHT48 | CCCE_NOCHECK | CICE_NOCHECK) +#define RSP_TYPE_R4 (RSP_TYPE_LGHT48 | CCCE_NOCHECK | CICE_NOCHECK) +#define RSP_TYPE_R5 (RSP_TYPE_LGHT48 | CCCE_CHECK | CICE_CHECK) +#define RSP_TYPE_R6 (RSP_TYPE_LGHT48 | CCCE_CHECK | CICE_CHECK) +#define RSP_TYPE_R7 (RSP_TYPE_LGHT48 | CCCE_CHECK | CICE_CHECK) + +/* All supported commands */ +#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) +#define MMC_CMD1 (INDEX(1) | RSP_TYPE_R3 | DP_NO_DATA | DDIR_WRITE) +#define MMC_CMD2 (INDEX(2) | RSP_TYPE_R2 | DP_NO_DATA | DDIR_WRITE) +#define MMC_CMD3 (INDEX(3) | RSP_TYPE_R1 | DP_NO_DATA | DDIR_WRITE) +#define MMC_SDCMD3 (INDEX(3) | RSP_TYPE_R6 | DP_NO_DATA | DDIR_WRITE) +#define MMC_CMD4 (INDEX(4) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) +#define MMC_CMD6 (INDEX(6) | RSP_TYPE_R1B | DP_NO_DATA | DDIR_WRITE) +#define MMC_CMD7_SELECT (INDEX(7) | RSP_TYPE_R1B | DP_NO_DATA | DDIR_WRITE) +#define MMC_CMD7_DESELECT (INDEX(7)| RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) +#define MMC_CMD8 (INDEX(8) | RSP_TYPE_R1 | DP_DATA | DDIR_READ) +#define MMC_SDCMD8 (INDEX(8) | RSP_TYPE_R7 | DP_NO_DATA | DDIR_WRITE) +#define MMC_CMD9 (INDEX(9) | RSP_TYPE_R2 | DP_NO_DATA | DDIR_WRITE) +#define MMC_CMD12 (INDEX(12) | RSP_TYPE_R1B | DP_NO_DATA | DDIR_WRITE) +#define MMC_CMD13 (INDEX(13) | RSP_TYPE_R1 | DP_NO_DATA | DDIR_WRITE) +#define MMC_CMD15 (INDEX(15) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) +#define MMC_CMD16 (INDEX(16) | RSP_TYPE_R1 | DP_NO_DATA | DDIR_WRITE) +#define MMC_CMD17 (INDEX(17) | RSP_TYPE_R1 | DP_DATA | DDIR_READ) +#define MMC_CMD24 (INDEX(24) | RSP_TYPE_R1 | DP_DATA | DDIR_WRITE) +#define MMC_ACMD6 (INDEX(6) | RSP_TYPE_R1 | DP_NO_DATA | DDIR_WRITE) +#define MMC_ACMD41 (INDEX(41) | RSP_TYPE_R3 | DP_NO_DATA | DDIR_WRITE) +#define MMC_ACMD51 (INDEX(51) | RSP_TYPE_R1 | DP_DATA | DDIR_READ) +#define MMC_CMD55 (INDEX(55) | RSP_TYPE_R1 | DP_NO_DATA | DDIR_WRITE) + +#define MMC_AC_CMD_RCA_MASK (unsigned int)(0xFFFF << 16) +#define MMC_BC_CMD_DSR_MASK (unsigned int)(0xFFFF << 16) +#define MMC_DSR_DEFAULT 0x0404 +#define SD_CMD8_CHECK_PATTERN 0xAA +#define SD_CMD8_2_7_3_6_V_RANGE (0x01 << 8) + +/* Clock Configurations and Macros */ + +#define MMC_CLOCK_REFERENCE 96 +#define MMC_RELATIVE_CARD_ADDRESS 0x1234 +#define MMC_INIT_SEQ_CLK (MMC_CLOCK_REFERENCE * 1000 / 80) +#define MMC_400kHz_CLK (MMC_CLOCK_REFERENCE * 1000 / 400) +#define CLKDR(r, f, u) ((((r)*100) / ((f)*(u))) + 1) +#define CLKD(f, u) (CLKDR(MMC_CLOCK_REFERENCE, f, u)) + +#define MMC_OCR_REG_ACCESS_MODE_MASK (0x3 << 29) +#define MMC_OCR_REG_ACCESS_MODE_BYTE (0x0 << 29) +#define MMC_OCR_REG_ACCESS_MODE_SECTOR (0x2 << 29) + +#define MMC_OCR_REG_HOST_CAPACITY_SUPPORT_MASK (0x1 << 30) +#define MMC_OCR_REG_HOST_CAPACITY_SUPPORT_BYTE (0x0 << 30) +#define MMC_OCR_REG_HOST_CAPACITY_SUPPORT_SECTOR (0x1 << 30) + +#define MMC_SD2_CSD_C_SIZE_LSB_MASK 0xFFFF +#define MMC_SD2_CSD_C_SIZE_MSB_MASK 0x003F +#define MMC_SD2_CSD_C_SIZE_MSB_OFFSET 16 +#define MMC_CSD_C_SIZE_LSB_MASK 0x0003 +#define MMC_CSD_C_SIZE_MSB_MASK 0x03FF +#define MMC_CSD_C_SIZE_MSB_OFFSET 2 + +#define MMC_CSD_TRAN_SPEED_UNIT_MASK (0x07 << 0) +#define MMC_CSD_TRAN_SPEED_FACTOR_MASK (0x0F << 3) +#define MMC_CSD_TRAN_SPEED_UNIT_100MHZ (0x3 << 0) +#define MMC_CSD_TRAN_SPEED_FACTOR_1_0 (0x01 << 3) +#define MMC_CSD_TRAN_SPEED_FACTOR_8_0 (0x0F << 3) + +typedef struct { + unsigned not_used:1; + unsigned crc:7; + unsigned ecc:2; + unsigned file_format:2; + unsigned tmp_write_protect:1; + unsigned perm_write_protect:1; + unsigned copy:1; + unsigned file_format_grp:1; + unsigned content_prot_app:1; + unsigned reserved_1:4; + unsigned write_bl_partial:1; + unsigned write_bl_len:4; + unsigned r2w_factor:3; + unsigned default_ecc:2; + unsigned wp_grp_enable:1; + unsigned wp_grp_size:5; + unsigned erase_grp_mult:5; + unsigned erase_grp_size:5; + unsigned c_size_mult:3; + unsigned vdd_w_curr_max:3; + unsigned vdd_w_curr_min:3; + unsigned vdd_r_curr_max:3; + unsigned vdd_r_curr_min:3; + unsigned c_size_lsb:2; + unsigned c_size_msb:10; + unsigned reserved_2:2; + unsigned dsr_imp:1; + unsigned read_blk_misalign:1; + unsigned write_blk_misalign:1; + unsigned read_bl_partial:1; + unsigned read_bl_len:4; + unsigned ccc:12; + unsigned tran_speed:8; + unsigned nsac:8; + unsigned taac:8; + unsigned reserved_3:2; + unsigned spec_vers:4; + unsigned csd_structure:2; +} mmc_csd_reg_t; + +/* csd for sd2.0 */ +typedef struct { + unsigned not_used:1; + unsigned crc:7; + unsigned reserved_1:2; + unsigned file_format:2; + unsigned tmp_write_protect:1; + unsigned perm_write_protect:1; + unsigned copy:1; + unsigned file_format_grp:1; + unsigned reserved_2:5; + unsigned write_bl_partial:1; + unsigned write_bl_len:4; + unsigned r2w_factor:3; + unsigned reserved_3:2; + unsigned wp_grp_enable:1; + unsigned wp_grp_size:7; + unsigned sector_size:7; + unsigned erase_blk_len:1; + unsigned reserved_4:1; + unsigned c_size_lsb:16; + unsigned c_size_msb:6; + unsigned reserved_5:6; + unsigned dsr_imp:1; + unsigned read_blk_misalign:1; + unsigned write_blk_misalign:1; + unsigned read_bl_partial:1; + unsigned read_bl_len:4; + unsigned ccc:12; + unsigned tran_speed:8; + unsigned nsac:8; + unsigned taac:8; + unsigned reserved_6:6; + unsigned csd_structure:2; +} mmc_sd2_csd_reg_t; + +/* extended csd - 512 bytes long */ +typedef struct { + unsigned char reserved_1[181]; + unsigned char erasedmemorycontent; + unsigned char reserved_2; + unsigned char buswidthmode; + unsigned char reserved_3; + unsigned char highspeedinterfacetiming; + unsigned char reserved_4; + unsigned char powerclass; + unsigned char reserved_5; + unsigned char commandsetrevision; + unsigned char reserved_6; + unsigned char commandset; + unsigned char extendedcsdrevision; + unsigned char reserved_7; + unsigned char csdstructureversion; + unsigned char reserved_8; + unsigned char cardtype; + unsigned char reserved_9[3]; + unsigned char powerclass_52mhz_1_95v; + unsigned char powerclass_26mhz_1_95v; + unsigned char powerclass_52mhz_3_6v; + unsigned char powerclass_26mhz_3_6v; + unsigned char reserved_10; + unsigned char minreadperf_4b_26mhz; + unsigned char minwriteperf_4b_26mhz; + unsigned char minreadperf_8b_26mhz_4b_52mhz; + unsigned char minwriteperf_8b_26mhz_4b_52mhz; + unsigned char minreadperf_8b_52mhz; + unsigned char minwriteperf_8b_52mhz; + unsigned char reserved_11; + unsigned int sectorcount; + unsigned char reserved_12[288]; + unsigned char supportedcommandsets; + unsigned char reserved_13[7]; +} mmc_extended_csd_reg_t; + +/* mmc sd responce */ +typedef struct { + unsigned int ocr; +} mmc_resp_r3; + +typedef struct { + unsigned short cardstatus; + unsigned short newpublishedrca; +} mmc_resp_r6; + +extern mmc_card_data mmc_dev; + +unsigned char mmc_lowlevel_init(void); +unsigned char mmc_send_command(unsigned int cmd, unsigned int arg, + unsigned int *response); +unsigned char mmc_setup_clock(unsigned int iclk, unsigned short clkd); +unsigned char mmc_set_opendrain(unsigned char state); +unsigned char mmc_read_data(unsigned int *output_buf); + +#endif /* MMC_H */ diff --git a/include/asm-arm/arch-omap3/mmc_host_def.h b/include/asm-arm/arch-omap3/mmc_host_def.h new file mode 100644 index 0000000..dfb376a --- /dev/null +++ b/include/asm-arm/arch-omap3/mmc_host_def.h @@ -0,0 +1,166 @@ +/* + * (C) Copyright 2008 + * Texas Instruments, <www.ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation's version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef MMC_HOST_DEF_H +#define MMC_HOST_DEF_H + +/* + * OMAP HSMMC register definitions + */ +#define OMAP_HSMMC_SYSCONFIG (*(unsigned int *) 0x4809C010) +#define OMAP_HSMMC_SYSSTATUS (*(unsigned int *) 0x4809C014) +#define OMAP_HSMMC_CON (*(unsigned int *) 0x4809C02C) +#define OMAP_HSMMC_BLK (*(unsigned int *) 0x4809C104) +#define OMAP_HSMMC_ARG (*(unsigned int *) 0x4809C108) +#define OMAP_HSMMC_CMD (*(unsigned int *) 0x4809C10C) +#define OMAP_HSMMC_RSP10 (*(unsigned int *) 0x4809C110) +#define OMAP_HSMMC_RSP32 (*(unsigned int *) 0x4809C114) +#define OMAP_HSMMC_RSP54 (*(unsigned int *) 0x4809C118) +#define OMAP_HSMMC_RSP76 (*(unsigned int *) 0x4809C11C) +#define OMAP_HSMMC_DATA (*(unsigned int *) 0x4809C120) +#define OMAP_HSMMC_PSTATE (*(unsigned int *) 0x4809C124) +#define OMAP_HSMMC_HCTL (*(unsigned int *) 0x4809C128) +#define OMAP_HSMMC_SYSCTL (*(unsigned int *) 0x4809C12C) +#define OMAP_HSMMC_STAT (*(unsigned int *) 0x4809C130) +#define OMAP_HSMMC_IE (*(unsigned int *) 0x4809C134) +#define OMAP_HSMMC_CAPA (*(unsigned int *) 0x4809C140) + +/* T2 Register definitions */ +#define CONTROL_DEV_CONF0 (*(unsigned int *) 0x48002274) +#define CONTROL_PBIAS_LITE (*(unsigned int *) 0x48002520) + +/* + * OMAP HS MMC Bit definitions + */ +#define MMC_SOFTRESET (0x1 << 1) +#define RESETDONE (0x1 << 0) +#define NOOPENDRAIN (0x0 << 0) +#define OPENDRAIN (0x1 << 0) +#define OD (0x1 << 0) +#define INIT_NOINIT (0x0 << 1) +#define INIT_INITSTREAM (0x1 << 1) +#define HR_NOHOSTRESP (0x0 << 2) +#define STR_BLOCK (0x0 << 3) +#define MODE_FUNC (0x0 << 4) +#define DW8_1_4BITMODE (0x0 << 5) +#define MIT_CTO (0x0 << 6) +#define CDP_ACTIVEHIGH (0x0 << 7) +#define WPP_ACTIVEHIGH (0x0 << 8) +#define RESERVED_MASK (0x3 << 9) +#define CTPL_MMC_SD (0x0 << 11) +#define BLEN_512BYTESLEN (0x200 << 0) +#define NBLK_STPCNT (0x0 << 16) +#define DE_DISABLE (0x0 << 0) +#define BCE_DISABLE (0x0 << 1) +#define ACEN_DISABLE (0x0 << 2) +#define DDIR_OFFSET (4) +#define DDIR_MASK (0x1 << 4) +#define DDIR_WRITE (0x0 << 4) +#define DDIR_READ (0x1 << 4) +#define MSBS_SGLEBLK (0x0 << 5) +#define RSP_TYPE_OFFSET (16) +#define RSP_TYPE_MASK (0x3 << 16) +#define RSP_TYPE_NORSP (0x0 << 16) +#define RSP_TYPE_LGHT136 (0x1 << 16) +#define RSP_TYPE_LGHT48 (0x2 << 16) +#define RSP_TYPE_LGHT48B (0x3 << 16) +#define CCCE_NOCHECK (0x0 << 19) +#define CCCE_CHECK (0x1 << 19) +#define CICE_NOCHECK (0x0 << 20) +#define CICE_CHECK (0x1 << 20) +#define DP_OFFSET (21) +#define DP_MASK (0x1 << 21) +#define DP_NO_DATA (0x0 << 21) +#define DP_DATA (0x1 << 21) +#define CMD_TYPE_NORMAL (0x0 << 22) +#define INDEX_OFFSET (24) +#define INDEX_MASK (0x3f << 24) +#define INDEX(i) (i << 24) +#define DATI_MASK (0x1 << 1) +#define DATI_CMDDIS (0x1 << 1) +#define DTW_1_BITMODE (0x0 << 1) +#define DTW_4_BITMODE (0x1 << 1) +#define SDBP_PWROFF (0x0 << 8) +#define SDBP_PWRON (0x1 << 8) +#define SDVS_1V8 (0x5 << 9) +#define SDVS_3V0 (0x6 << 9) +#define ICE_MASK (0x1 << 0) +#define ICE_STOP (0x0 << 0) +#define ICS_MASK (0x1 << 1) +#define ICS_NOTREADY (0x0 << 1) +#define ICE_OSCILLATE (0x1 << 0) +#define CEN_MASK (0x1 << 2) +#define CEN_DISABLE (0x0 << 2) +#define CEN_ENABLE (0x1 << 2) +#define CLKD_OFFSET (6) +#define CLKD_MASK (0x3FF << 6) +#define DTO_MASK (0xF << 16) +#define DTO_15THDTO (0xE << 16) +#define SOFTRESETALL (0x1 << 24) +#define CC_MASK (0x1 << 0) +#define TC_MASK (0x1 << 1) +#define BWR_MASK (0x1 << 4) +#define BRR_MASK (0x1 << 5) +#define ERRI_MASK (0x1 << 15) +#define IE_CC (0x01 << 0) +#define IE_TC (0x01 << 1) +#define IE_BWR (0x01 << 4) +#define IE_BRR (0x01 << 5) +#define IE_CTO (0x01 << 16) +#define IE_CCRC (0x01 << 17) +#define IE_CEB (0x01 << 18) +#define IE_CIE (0x01 << 19) +#define IE_DTO (0x01 << 20) +#define IE_DCRC (0x01 << 21) +#define IE_DEB (0x01 << 22) +#define IE_CERR (0x01 << 28) +#define IE_BADA (0x01 << 29) + +#define VS30_3V0SUP (1 << 25) +#define VS18_1V8SUP (1 << 26) + +/* Driver definitions */ +#define MMCSD_SECTOR_SIZE 512 +#define MMC_CARD 0 +#define SD_CARD 1 +#define BYTE_MODE 0 +#define SECTOR_MODE 1 +#define CLK_INITSEQ 0 +#define CLK_400KHZ 1 +#define CLK_MISC 2 + +typedef struct { + unsigned int card_type; + unsigned int version; + unsigned int mode; + unsigned int size; + unsigned int RCA; +} mmc_card_data; + +#define mmc_reg_out(addr, mask, val)\ + (addr) = (((addr)) & (~(mask))) | ((val) & (mask)); +#define mmc_reg_out(addr, mask, val)\ + (addr) = (((addr)) & (~(mask))) | ((val) & (mask)); + +#endif /* MMC_HOST_DEF_H */ diff --git a/include/asm-arm/arch-omap3/mux.h b/include/asm-arm/arch-omap3/mux.h new file mode 100644 index 0000000..0c01c73 --- /dev/null +++ b/include/asm-arm/arch-omap3/mux.h @@ -0,0 +1,412 @@ +/* + * (C) Copyright 2006-2008 + * Texas Instruments, <www.ti.com> + * Syed Mohammed Khasim <x0khasim@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _MUX_H_ +#define _MUX_H_ + +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + */ + +#define IEN (1 << 8) + +#define IDIS (0 << 8) +#define PTU (1 << 4) +#define PTD (0 << 4) +#define EN (1 << 3) +#define DIS (0 << 3) + +#define M0 0 +#define M1 1 +#define M2 2 +#define M3 3 +#define M4 4 +#define M5 5 +#define M6 6 +#define M7 7 + +/* + * To get the actual address the offset has to added + * with OMAP34XX_CTRL_BASE to get the actual address + */ + +/*SDRC*/ +#define CONTROL_PADCONF_SDRC_D0 0x0030 +#define CONTROL_PADCONF_SDRC_D1 0x0032 +#define CONTROL_PADCONF_SDRC_D2 0x0034 +#define CONTROL_PADCONF_SDRC_D3 0x0036 +#define CONTROL_PADCONF_SDRC_D4 0x0038 +#define CONTROL_PADCONF_SDRC_D5 0x003A +#define CONTROL_PADCONF_SDRC_D6 0x003C +#define CONTROL_PADCONF_SDRC_D7 0x003E +#define CONTROL_PADCONF_SDRC_D8 0x0040 +#define CONTROL_PADCONF_SDRC_D9 0x0042 +#define CONTROL_PADCONF_SDRC_D10 0x0044 +#define CONTROL_PADCONF_SDRC_D11 0x0046 +#define CONTROL_PADCONF_SDRC_D12 0x0048 +#define CONTROL_PADCONF_SDRC_D13 0x004A +#define CONTROL_PADCONF_SDRC_D14 0x004C +#define CONTROL_PADCONF_SDRC_D15 0x004E +#define CONTROL_PADCONF_SDRC_D16 0x0050 +#define CONTROL_PADCONF_SDRC_D17 0x0052 +#define CONTROL_PADCONF_SDRC_D18 0x0054 +#define CONTROL_PADCONF_SDRC_D19 0x0056 +#define CONTROL_PADCONF_SDRC_D20 0x0058 +#define CONTROL_PADCONF_SDRC_D21 0x005A +#define CONTROL_PADCONF_SDRC_D22 0x005C +#define CONTROL_PADCONF_SDRC_D23 0x005E +#define CONTROL_PADCONF_SDRC_D24 0x0060 +#define CONTROL_PADCONF_SDRC_D25 0x0062 +#define CONTROL_PADCONF_SDRC_D26 0x0064 +#define CONTROL_PADCONF_SDRC_D27 0x0066 +#define CONTROL_PADCONF_SDRC_D28 0x0068 +#define CONTROL_PADCONF_SDRC_D29 0x006A +#define CONTROL_PADCONF_SDRC_D30 0x006C +#define CONTROL_PADCONF_SDRC_D31 0x006E +#define CONTROL_PADCONF_SDRC_CLK 0x0070 +#define CONTROL_PADCONF_SDRC_DQS0 0x0072 +#define CONTROL_PADCONF_SDRC_DQS1 0x0074 +#define CONTROL_PADCONF_SDRC_DQS2 0x0076 +#define CONTROL_PADCONF_SDRC_DQS3 0x0078 +/*GPMC*/ +#define CONTROL_PADCONF_GPMC_A1 0x007A +#define CONTROL_PADCONF_GPMC_A2 0x007C +#define CONTROL_PADCONF_GPMC_A3 0x007E +#define CONTROL_PADCONF_GPMC_A4 0x0080 +#define CONTROL_PADCONF_GPMC_A5 0x0082 +#define CONTROL_PADCONF_GPMC_A6 0x0084 +#define CONTROL_PADCONF_GPMC_A7 0x0086 +#define CONTROL_PADCONF_GPMC_A8 0x0088 +#define CONTROL_PADCONF_GPMC_A9 0x008A +#define CONTROL_PADCONF_GPMC_A10 0x008C +#define CONTROL_PADCONF_GPMC_D0 0x008E +#define CONTROL_PADCONF_GPMC_D1 0x0090 +#define CONTROL_PADCONF_GPMC_D2 0x0092 +#define CONTROL_PADCONF_GPMC_D3 0x0094 +#define CONTROL_PADCONF_GPMC_D4 0x0096 +#define CONTROL_PADCONF_GPMC_D5 0x0098 +#define CONTROL_PADCONF_GPMC_D6 0x009A +#define CONTROL_PADCONF_GPMC_D7 0x009C +#define CONTROL_PADCONF_GPMC_D8 0x009E +#define CONTROL_PADCONF_GPMC_D9 0x00A0 +#define CONTROL_PADCONF_GPMC_D10 0x00A2 +#define CONTROL_PADCONF_GPMC_D11 0x00A4 +#define CONTROL_PADCONF_GPMC_D12 0x00A6 +#define CONTROL_PADCONF_GPMC_D13 0x00A8 +#define CONTROL_PADCONF_GPMC_D14 0x00AA +#define CONTROL_PADCONF_GPMC_D15 0x00AC +#define CONTROL_PADCONF_GPMC_NCS0 0x00AE +#define CONTROL_PADCONF_GPMC_NCS1 0x00B0 +#define CONTROL_PADCONF_GPMC_NCS2 0x00B2 +#define CONTROL_PADCONF_GPMC_NCS3 0x00B4 +#define CONTROL_PADCONF_GPMC_NCS4 0x00B6 +#define CONTROL_PADCONF_GPMC_NCS5 0x00B8 +#define CONTROL_PADCONF_GPMC_NCS6 0x00BA +#define CONTROL_PADCONF_GPMC_NCS7 0x00BC +#define CONTROL_PADCONF_GPMC_CLK 0x00BE +#define CONTROL_PADCONF_GPMC_NADV_ALE 0x00C0 +#define CONTROL_PADCONF_GPMC_NOE 0x00C2 +#define CONTROL_PADCONF_GPMC_NWE 0x00C4 +#define CONTROL_PADCONF_GPMC_NBE0_CLE 0x00C6 +#define CONTROL_PADCONF_GPMC_NBE1 0x00C8 +#define CONTROL_PADCONF_GPMC_NWP 0x00CA +#define CONTROL_PADCONF_GPMC_WAIT0 0x00CC +#define CONTROL_PADCONF_GPMC_WAIT1 0x00CE +#define CONTROL_PADCONF_GPMC_WAIT2 0x00D0 +#define CONTROL_PADCONF_GPMC_WAIT3 0x00D2 +/*DSS*/ +#define CONTROL_PADCONF_DSS_PCLK 0x00D4 +#define CONTROL_PADCONF_DSS_HSYNC 0x00D6 +#define CONTROL_PADCONF_DSS_VSYNC 0x00D8 +#define CONTROL_PADCONF_DSS_ACBIAS 0x00DA +#define CONTROL_PADCONF_DSS_DATA0 0x00DC +#define CONTROL_PADCONF_DSS_DATA1 0x00DE +#define CONTROL_PADCONF_DSS_DATA2 0x00E0 +#define CONTROL_PADCONF_DSS_DATA3 0x00E2 +#define CONTROL_PADCONF_DSS_DATA4 0x00E4 +#define CONTROL_PADCONF_DSS_DATA5 0x00E6 +#define CONTROL_PADCONF_DSS_DATA6 0x00E8 +#define CONTROL_PADCONF_DSS_DATA7 0x00EA +#define CONTROL_PADCONF_DSS_DATA8 0x00EC +#define CONTROL_PADCONF_DSS_DATA9 0x00EE +#define CONTROL_PADCONF_DSS_DATA10 0x00F0 +#define CONTROL_PADCONF_DSS_DATA11 0x00F2 +#define CONTROL_PADCONF_DSS_DATA12 0x00F4 +#define CONTROL_PADCONF_DSS_DATA13 0x00F6 +#define CONTROL_PADCONF_DSS_DATA14 0x00F8 +#define CONTROL_PADCONF_DSS_DATA15 0x00FA +#define CONTROL_PADCONF_DSS_DATA16 0x00FC +#define CONTROL_PADCONF_DSS_DATA17 0x00FE +#define CONTROL_PADCONF_DSS_DATA18 0x0100 +#define CONTROL_PADCONF_DSS_DATA19 0x0102 +#define CONTROL_PADCONF_DSS_DATA20 0x0104 +#define CONTROL_PADCONF_DSS_DATA21 0x0106 +#define CONTROL_PADCONF_DSS_DATA22 0x0108 +#define CONTROL_PADCONF_DSS_DATA23 0x010A +/*CAMERA*/ +#define CONTROL_PADCONF_CAM_HS 0x010C +#define CONTROL_PADCONF_CAM_VS 0x010E +#define CONTROL_PADCONF_CAM_XCLKA 0x0110 +#define CONTROL_PADCONF_CAM_PCLK 0x0112 +#define CONTROL_PADCONF_CAM_FLD 0x0114 +#define CONTROL_PADCONF_CAM_D0 0x0116 +#define CONTROL_PADCONF_CAM_D1 0x0118 +#define CONTROL_PADCONF_CAM_D2 0x011A +#define CONTROL_PADCONF_CAM_D3 0x011C +#define CONTROL_PADCONF_CAM_D4 0x011E +#define CONTROL_PADCONF_CAM_D5 0x0120 +#define CONTROL_PADCONF_CAM_D6 0x0122 +#define CONTROL_PADCONF_CAM_D7 0x0124 +#define CONTROL_PADCONF_CAM_D8 0x0126 +#define CONTROL_PADCONF_CAM_D9 0x0128 +#define CONTROL_PADCONF_CAM_D10 0x012A +#define CONTROL_PADCONF_CAM_D11 0x012C +#define CONTROL_PADCONF_CAM_XCLKB 0x012E +#define CONTROL_PADCONF_CAM_WEN 0x0130 +#define CONTROL_PADCONF_CAM_STROBE 0x0132 +#define CONTROL_PADCONF_CSI2_DX0 0x0134 +#define CONTROL_PADCONF_CSI2_DY0 0x0136 +#define CONTROL_PADCONF_CSI2_DX1 0x0138 +#define CONTROL_PADCONF_CSI2_DY1 0x013A +/*Audio Interface */ +#define CONTROL_PADCONF_MCBSP2_FSX 0x013C +#define CONTROL_PADCONF_MCBSP2_CLKX 0x013E +#define CONTROL_PADCONF_MCBSP2_DR 0x0140 +#define CONTROL_PADCONF_MCBSP2_DX 0x0142 +#define CONTROL_PADCONF_MMC1_CLK 0x0144 +#define CONTROL_PADCONF_MMC1_CMD 0x0146 +#define CONTROL_PADCONF_MMC1_DAT0 0x0148 +#define CONTROL_PADCONF_MMC1_DAT1 0x014A +#define CONTROL_PADCONF_MMC1_DAT2 0x014C +#define CONTROL_PADCONF_MMC1_DAT3 0x014E +#define CONTROL_PADCONF_MMC1_DAT4 0x0150 +#define CONTROL_PADCONF_MMC1_DAT5 0x0152 +#define CONTROL_PADCONF_MMC1_DAT6 0x0154 +#define CONTROL_PADCONF_MMC1_DAT7 0x0156 +/*Wireless LAN */ +#define CONTROL_PADCONF_MMC2_CLK 0x0158 +#define CONTROL_PADCONF_MMC2_CMD 0x015A +#define CONTROL_PADCONF_MMC2_DAT0 0x015C +#define CONTROL_PADCONF_MMC2_DAT1 0x015E +#define CONTROL_PADCONF_MMC2_DAT2 0x0160 +#define CONTROL_PADCONF_MMC2_DAT3 0x0162 +#define CONTROL_PADCONF_MMC2_DAT4 0x0164 +#define CONTROL_PADCONF_MMC2_DAT5 0x0166 +#define CONTROL_PADCONF_MMC2_DAT6 0x0168 +#define CONTROL_PADCONF_MMC2_DAT7 0x016A +/*Bluetooth*/ +#define CONTROL_PADCONF_MCBSP3_DX 0x016C +#define CONTROL_PADCONF_MCBSP3_DR 0x016E +#define CONTROL_PADCONF_MCBSP3_CLKX 0x0170 +#define CONTROL_PADCONF_MCBSP3_FSX 0x0172 +#define CONTROL_PADCONF_UART2_CTS 0x0174 +#define CONTROL_PADCONF_UART2_RTS 0x0176 +#define CONTROL_PADCONF_UART2_TX 0x0178 +#define CONTROL_PADCONF_UART2_RX 0x017A +/*Modem Interface */ +#define CONTROL_PADCONF_UART1_TX 0x017C +#define CONTROL_PADCONF_UART1_RTS 0x017E +#define CONTROL_PADCONF_UART1_CTS 0x0180 +#define CONTROL_PADCONF_UART1_RX 0x0182 +#define CONTROL_PADCONF_MCBSP4_CLKX 0x0184 +#define CONTROL_PADCONF_MCBSP4_DR 0x0186 +#define CONTROL_PADCONF_MCBSP4_DX 0x0188 +#define CONTROL_PADCONF_MCBSP4_FSX 0x018A +#define CONTROL_PADCONF_MCBSP1_CLKR 0x018C +#define CONTROL_PADCONF_MCBSP1_FSR 0x018E +#define CONTROL_PADCONF_MCBSP1_DX 0x0190 +#define CONTROL_PADCONF_MCBSP1_DR 0x0192 +#define CONTROL_PADCONF_MCBSP_CLKS 0x0194 +#define CONTROL_PADCONF_MCBSP1_FSX 0x0196 +#define CONTROL_PADCONF_MCBSP1_CLKX 0x0198 +/*Serial Interface*/ +#define CONTROL_PADCONF_UART3_CTS_RCTX 0x019A +#define CONTROL_PADCONF_UART3_RTS_SD 0x019C +#define CONTROL_PADCONF_UART3_RX_IRRX 0x019E +#define CONTROL_PADCONF_UART3_TX_IRTX 0x01A0 +#define CONTROL_PADCONF_HSUSB0_CLK 0x01A2 +#define CONTROL_PADCONF_HSUSB0_STP 0x01A4 +#define CONTROL_PADCONF_HSUSB0_DIR 0x01A6 +#define CONTROL_PADCONF_HSUSB0_NXT 0x01A8 +#define CONTROL_PADCONF_HSUSB0_DATA0 0x01AA +#define CONTROL_PADCONF_HSUSB0_DATA1 0x01AC +#define CONTROL_PADCONF_HSUSB0_DATA2 0x01AE +#define CONTROL_PADCONF_HSUSB0_DATA3 0x01B0 +#define CONTROL_PADCONF_HSUSB0_DATA4 0x01B2 +#define CONTROL_PADCONF_HSUSB0_DATA5 0x01B4 +#define CONTROL_PADCONF_HSUSB0_DATA6 0x01B6 +#define CONTROL_PADCONF_HSUSB0_DATA7 0x01B8 +#define CONTROL_PADCONF_I2C1_SCL 0x01BA +#define CONTROL_PADCONF_I2C1_SDA 0x01BC +#define CONTROL_PADCONF_I2C2_SCL 0x01BE +#define CONTROL_PADCONF_I2C2_SDA 0x01C0 +#define CONTROL_PADCONF_I2C3_SCL 0x01C2 +#define CONTROL_PADCONF_I2C3_SDA 0x01C4 +#define CONTROL_PADCONF_I2C4_SCL 0x0A00 +#define CONTROL_PADCONF_I2C4_SDA 0x0A02 +#define CONTROL_PADCONF_HDQ_SIO 0x01C6 +#define CONTROL_PADCONF_MCSPI1_CLK 0x01C8 +#define CONTROL_PADCONF_MCSPI1_SIMO 0x01CA +#define CONTROL_PADCONF_MCSPI1_SOMI 0x01CC +#define CONTROL_PADCONF_MCSPI1_CS0 0x01CE +#define CONTROL_PADCONF_MCSPI1_CS1 0x01D0 +#define CONTROL_PADCONF_MCSPI1_CS2 0x01D2 +#define CONTROL_PADCONF_MCSPI1_CS3 0x01D4 +#define CONTROL_PADCONF_MCSPI2_CLK 0x01D6 +#define CONTROL_PADCONF_MCSPI2_SIMO 0x01D8 +#define CONTROL_PADCONF_MCSPI2_SOMI 0x01DA +#define CONTROL_PADCONF_MCSPI2_CS0 0x01DC +#define CONTROL_PADCONF_MCSPI2_CS1 0x01DE +/*Control and debug */ +#define CONTROL_PADCONF_SYS_32K 0x0A04 +#define CONTROL_PADCONF_SYS_CLKREQ 0x0A06 +#define CONTROL_PADCONF_SYS_NIRQ 0x01E0 +#define CONTROL_PADCONF_SYS_BOOT0 0x0A0A +#define CONTROL_PADCONF_SYS_BOOT1 0x0A0C +#define CONTROL_PADCONF_SYS_BOOT2 0x0A0E +#define CONTROL_PADCONF_SYS_BOOT3 0x0A10 +#define CONTROL_PADCONF_SYS_BOOT4 0x0A12 +#define CONTROL_PADCONF_SYS_BOOT5 0x0A14 +#define CONTROL_PADCONF_SYS_BOOT6 0x0A16 +#define CONTROL_PADCONF_SYS_OFF_MODE 0x0A18 +#define CONTROL_PADCONF_SYS_CLKOUT1 0x0A1A +#define CONTROL_PADCONF_SYS_CLKOUT2 0x01E2 +#define CONTROL_PADCONF_JTAG_nTRST 0x0A1C +#define CONTROL_PADCONF_JTAG_TCK 0x0A1E +#define CONTROL_PADCONF_JTAG_TMS 0x0A20 +#define CONTROL_PADCONF_JTAG_TDI 0x0A22 +#define CONTROL_PADCONF_JTAG_EMU0 0x0A24 +#define CONTROL_PADCONF_JTAG_EMU1 0x0A26 +#define CONTROL_PADCONF_ETK_CLK 0x0A28 +#define CONTROL_PADCONF_ETK_CTL 0x0A2A +#define CONTROL_PADCONF_ETK_D0 0x0A2C +#define CONTROL_PADCONF_ETK_D1 0x0A2E +#define CONTROL_PADCONF_ETK_D2 0x0A30 +#define CONTROL_PADCONF_ETK_D3 0x0A32 +#define CONTROL_PADCONF_ETK_D4 0x0A34 +#define CONTROL_PADCONF_ETK_D5 0x0A36 +#define CONTROL_PADCONF_ETK_D6 0x0A38 +#define CONTROL_PADCONF_ETK_D7 0x0A3A +#define CONTROL_PADCONF_ETK_D8 0x0A3C +#define CONTROL_PADCONF_ETK_D9 0x0A3E +#define CONTROL_PADCONF_ETK_D10 0x0A40 +#define CONTROL_PADCONF_ETK_D11 0x0A42 +#define CONTROL_PADCONF_ETK_D12 0x0A44 +#define CONTROL_PADCONF_ETK_D13 0x0A46 +#define CONTROL_PADCONF_ETK_D14 0x0A48 +#define CONTROL_PADCONF_ETK_D15 0x0A4A +#define CONTROL_PADCONF_ETK_CLK_ES2 0x05D8 +#define CONTROL_PADCONF_ETK_CTL_ES2 0x05DA +#define CONTROL_PADCONF_ETK_D0_ES2 0x05DC +#define CONTROL_PADCONF_ETK_D1_ES2 0x05DE +#define CONTROL_PADCONF_ETK_D2_ES2 0x05E0 +#define CONTROL_PADCONF_ETK_D3_ES2 0x05E2 +#define CONTROL_PADCONF_ETK_D4_ES2 0x05E4 +#define CONTROL_PADCONF_ETK_D5_ES2 0x05E6 +#define CONTROL_PADCONF_ETK_D6_ES2 0x05E8 +#define CONTROL_PADCONF_ETK_D7_ES2 0x05EA +#define CONTROL_PADCONF_ETK_D8_ES2 0x05EC +#define CONTROL_PADCONF_ETK_D9_ES2 0x05EE +#define CONTROL_PADCONF_ETK_D10_ES2 0x05F0 +#define CONTROL_PADCONF_ETK_D11_ES2 0x05F2 +#define CONTROL_PADCONF_ETK_D12_ES2 0x05F4 +#define CONTROL_PADCONF_ETK_D13_ES2 0x05F6 +#define CONTROL_PADCONF_ETK_D14_ES2 0x05F8 +#define CONTROL_PADCONF_ETK_D15_ES2 0x05FA +/*Die to Die */ +#define CONTROL_PADCONF_D2D_MCAD0 0x01E4 +#define CONTROL_PADCONF_D2D_MCAD1 0x01E6 +#define CONTROL_PADCONF_D2D_MCAD2 0x01E8 +#define CONTROL_PADCONF_D2D_MCAD3 0x01EA +#define CONTROL_PADCONF_D2D_MCAD4 0x01EC +#define CONTROL_PADCONF_D2D_MCAD5 0x01EE +#define CONTROL_PADCONF_D2D_MCAD6 0x01F0 +#define CONTROL_PADCONF_D2D_MCAD7 0x01F2 +#define CONTROL_PADCONF_D2D_MCAD8 0x01F4 +#define CONTROL_PADCONF_D2D_MCAD9 0x01F6 +#define CONTROL_PADCONF_D2D_MCAD10 0x01F8 +#define CONTROL_PADCONF_D2D_MCAD11 0x01FA +#define CONTROL_PADCONF_D2D_MCAD12 0x01FC +#define CONTROL_PADCONF_D2D_MCAD13 0x01FE +#define CONTROL_PADCONF_D2D_MCAD14 0x0200 +#define CONTROL_PADCONF_D2D_MCAD15 0x0202 +#define CONTROL_PADCONF_D2D_MCAD16 0x0204 +#define CONTROL_PADCONF_D2D_MCAD17 0x0206 +#define CONTROL_PADCONF_D2D_MCAD18 0x0208 +#define CONTROL_PADCONF_D2D_MCAD19 0x020A +#define CONTROL_PADCONF_D2D_MCAD20 0x020C +#define CONTROL_PADCONF_D2D_MCAD21 0x020E +#define CONTROL_PADCONF_D2D_MCAD22 0x0210 +#define CONTROL_PADCONF_D2D_MCAD23 0x0212 +#define CONTROL_PADCONF_D2D_MCAD24 0x0214 +#define CONTROL_PADCONF_D2D_MCAD25 0x0216 +#define CONTROL_PADCONF_D2D_MCAD26 0x0218 +#define CONTROL_PADCONF_D2D_MCAD27 0x021A +#define CONTROL_PADCONF_D2D_MCAD28 0x021C +#define CONTROL_PADCONF_D2D_MCAD29 0x021E +#define CONTROL_PADCONF_D2D_MCAD30 0x0220 +#define CONTROL_PADCONF_D2D_MCAD31 0x0222 +#define CONTROL_PADCONF_D2D_MCAD32 0x0224 +#define CONTROL_PADCONF_D2D_MCAD33 0x0226 +#define CONTROL_PADCONF_D2D_MCAD34 0x0228 +#define CONTROL_PADCONF_D2D_MCAD35 0x022A +#define CONTROL_PADCONF_D2D_MCAD36 0x022C +#define CONTROL_PADCONF_D2D_CLK26MI 0x022E +#define CONTROL_PADCONF_D2D_NRESPWRON 0x0230 +#define CONTROL_PADCONF_D2D_NRESWARM 0x0232 +#define CONTROL_PADCONF_D2D_ARM9NIRQ 0x0234 +#define CONTROL_PADCONF_D2D_UMA2P6FIQ 0x0236 +#define CONTROL_PADCONF_D2D_SPINT 0x0238 +#define CONTROL_PADCONF_D2D_FRINT 0x023A +#define CONTROL_PADCONF_D2D_DMAREQ0 0x023C +#define CONTROL_PADCONF_D2D_DMAREQ1 0x023E +#define CONTROL_PADCONF_D2D_DMAREQ2 0x0240 +#define CONTROL_PADCONF_D2D_DMAREQ3 0x0242 +#define CONTROL_PADCONF_D2D_N3GTRST 0x0244 +#define CONTROL_PADCONF_D2D_N3GTDI 0x0246 +#define CONTROL_PADCONF_D2D_N3GTDO 0x0248 +#define CONTROL_PADCONF_D2D_N3GTMS 0x024A +#define CONTROL_PADCONF_D2D_N3GTCK 0x024C +#define CONTROL_PADCONF_D2D_N3GRTCK 0x024E +#define CONTROL_PADCONF_D2D_MSTDBY 0x0250 +#define CONTROL_PADCONF_D2D_SWAKEUP 0x0A4C +#define CONTROL_PADCONF_D2D_IDLEREQ 0x0252 +#define CONTROL_PADCONF_D2D_IDLEACK 0x0254 +#define CONTROL_PADCONF_D2D_MWRITE 0x0256 +#define CONTROL_PADCONF_D2D_SWRITE 0x0258 +#define CONTROL_PADCONF_D2D_MREAD 0x025A +#define CONTROL_PADCONF_D2D_SREAD 0x025C +#define CONTROL_PADCONF_D2D_MBUSFLAG 0x025E +#define CONTROL_PADCONF_D2D_SBUSFLAG 0x0260 +#define CONTROL_PADCONF_SDRC_CKE0 0x0262 +#define CONTROL_PADCONF_SDRC_CKE1 0x0264 + +#define MUX_VAL(OFFSET,VALUE)\ + writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET)); + +#define CP(x) (CONTROL_PADCONF_##x) + +#endif diff --git a/include/asm-arm/arch-omap3/omap3.h b/include/asm-arm/arch-omap3/omap3.h new file mode 100644 index 0000000..7473656 --- /dev/null +++ b/include/asm-arm/arch-omap3/omap3.h @@ -0,0 +1,218 @@ +/* + * (C) Copyright 2006-2008 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <x0khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _OMAP3_H_ +#define _OMAP3_H_ + +/* Stuff on L3 Interconnect */ +#define SMX_APE_BASE 0x68000000 + +/* GPMC */ +#define OMAP34XX_GPMC_BASE 0x6E000000 + +/* SMS */ +#define OMAP34XX_SMS_BASE 0x6C000000 + +/* SDRC */ +#define OMAP34XX_SDRC_BASE 0x6D000000 + +/* + * L4 Peripherals - L4 Wakeup and L4 Core now + */ +#define OMAP34XX_CORE_L4_IO_BASE 0x48000000 +#define OMAP34XX_WAKEUP_L4_IO_BASE 0x48300000 +#define OMAP34XX_L4_PER 0x49000000 +#define OMAP34XX_L4_IO_BASE OMAP34XX_CORE_L4_IO_BASE + +/* CONTROL */ +#define OMAP34XX_CTRL_BASE (OMAP34XX_L4_IO_BASE + 0x2000) + +/* UART */ +#define OMAP34XX_UART1 (OMAP34XX_L4_IO_BASE + 0x6a000) +#define OMAP34XX_UART2 (OMAP34XX_L4_IO_BASE + 0x6c000) +#define OMAP34XX_UART3 (OMAP34XX_L4_PER + 0x20000) + +/* General Purpose Timers */ +#define OMAP34XX_GPT1 0x48318000 +#define OMAP34XX_GPT2 0x49032000 +#define OMAP34XX_GPT3 0x49034000 +#define OMAP34XX_GPT4 0x49036000 +#define OMAP34XX_GPT5 0x49038000 +#define OMAP34XX_GPT6 0x4903A000 +#define OMAP34XX_GPT7 0x4903C000 +#define OMAP34XX_GPT8 0x4903E000 +#define OMAP34XX_GPT9 0x49040000 +#define OMAP34XX_GPT10 0x48086000 +#define OMAP34XX_GPT11 0x48088000 +#define OMAP34XX_GPT12 0x48304000 + +/* WatchDog Timers (1 secure, 3 GP) */ +#define WD1_BASE 0x4830C000 +#define WD2_BASE 0x48314000 +#define WD3_BASE 0x49030000 + +/* 32KTIMER */ +#define SYNC_32KTIMER_BASE 0x48320000 + +#ifndef __ASSEMBLY__ + +typedef struct s32ktimer { + unsigned char res[0x10]; + unsigned int s32k_cr; /* 0x10 */ +} s32ktimer_t; + +#endif /* __ASSEMBLY__ */ + +/* OMAP3 GPIO registers */ +#define OMAP34XX_GPIO1_BASE 0x48310000 +#define OMAP34XX_GPIO2_BASE 0x49050000 +#define OMAP34XX_GPIO3_BASE 0x49052000 +#define OMAP34XX_GPIO4_BASE 0x49054000 +#define OMAP34XX_GPIO5_BASE 0x49056000 +#define OMAP34XX_GPIO6_BASE 0x49058000 + +#ifndef __ASSEMBLY__ +typedef struct gpio { + unsigned char res1[0x34]; + unsigned int oe; /* 0x34 */ + unsigned char res2[0x58]; + unsigned int cleardataout; /* 0x90 */ + unsigned int setdataout; /* 0x94 */ +} gpio_t; +#endif /* __ASSEMBLY__ */ + +#define GPIO0 (0x1 << 0) +#define GPIO1 (0x1 << 1) +#define GPIO2 (0x1 << 2) +#define GPIO3 (0x1 << 3) +#define GPIO4 (0x1 << 4) +#define GPIO5 (0x1 << 5) +#define GPIO6 (0x1 << 6) +#define GPIO7 (0x1 << 7) +#define GPIO8 (0x1 << 8) +#define GPIO9 (0x1 << 9) +#define GPIO10 (0x1 << 10) +#define GPIO11 (0x1 << 11) +#define GPIO12 (0x1 << 12) +#define GPIO13 (0x1 << 13) +#define GPIO14 (0x1 << 14) +#define GPIO15 (0x1 << 15) +#define GPIO16 (0x1 << 16) +#define GPIO17 (0x1 << 17) +#define GPIO18 (0x1 << 18) +#define GPIO19 (0x1 << 19) +#define GPIO20 (0x1 << 20) +#define GPIO21 (0x1 << 21) +#define GPIO22 (0x1 << 22) +#define GPIO23 (0x1 << 23) +#define GPIO24 (0x1 << 24) +#define GPIO25 (0x1 << 25) +#define GPIO26 (0x1 << 26) +#define GPIO27 (0x1 << 27) +#define GPIO28 (0x1 << 28) +#define GPIO29 (0x1 << 29) +#define GPIO30 (0x1 << 30) +#define GPIO31 (0x1 << 31) + +/* base address for indirect vectors (internal boot mode) */ +#define SRAM_OFFSET0 0x40000000 +#define SRAM_OFFSET1 0x00200000 +#define SRAM_OFFSET2 0x0000F800 +#define SRAM_VECT_CODE (SRAM_OFFSET0 | SRAM_OFFSET1 | \ + SRAM_OFFSET2) + +#define LOW_LEVEL_SRAM_STACK 0x4020FFFC + +#define DEBUG_LED1 149 /* gpio */ +#define DEBUG_LED2 150 /* gpio */ + +#define XDR_POP 5 /* package on package part */ +#define SDR_DISCRETE 4 /* 128M memory SDR module */ +#define DDR_STACKED 3 /* stacked part on 2422 */ +#define DDR_COMBO 2 /* combo part on cpu daughter card */ +#define DDR_DISCRETE 1 /* 2x16 parts on daughter card */ + +#define DDR_100 100 /* type found on most mem d-boards */ +#define DDR_111 111 /* some combo parts */ +#define DDR_133 133 /* most combo, some mem d-boards */ +#define DDR_165 165 /* future parts */ + +#define CPU_3430 0x3430 + +/* + * 343x real hardware: + * ES1 = rev 0 + * + * 343x code defines: + * ES1 = 0+1 = 1 + * ES1 = 1+1 = 1 + */ +#define CPU_3430_ES1 1 +#define CPU_3430_ES2 2 + +#define WIDTH_8BIT 0x0000 +#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */ + +/* SDP definitions according to FPGA Rev. Is this OK?? */ +#define SDP_3430_V1 0x1 +#define SDP_3430_V2 0x2 + +/* EVM definitions */ +#define OMAP3EVM_V1 0x1 +#define OMAP3EVM_V2 0x2 + +/* I2C power management companion definitions */ +#define PWRMGT_ADDR_ID1 0x48 +#define PWRMGT_ADDR_ID2 0x49 +#define PWRMGT_ADDR_ID3 0x4A +#define PWRMGT_ADDR_ID4 0x4B + +/* I2C ID3 (slave3) register */ +#define LEDEN 0xEE + +#define LEDAON (0x1 << 0) +#define LEDBON (0x1 << 1) +#define LEDAPWM (0x1 << 4) +#define LEDBPWM (0x1 << 5) + +/* I2C ID4 (slave4) register */ +#define VAUX2_DEV_GRP 0x76 +#define VAUX2_DEDICATED 0x79 +#define VAUX3_DEV_GRP 0x7A +#define VAUX3_DEDICATED 0x7D +#define VPLL2_DEV_GRP 0x8E +#define VPLL2_DEDICATED 0x91 +#define VDAC_DEV_GRP 0x96 +#define VDAC_DEDICATED 0x99 + +#define DEV_GRP_P1 0x20 +#define DEV_GRP_ALL 0xE0 + +#define VAUX2_VSEL_28 0x09 +#define VAUX3_VSEL_28 0x03 +#define VPLL2_VSEL_18 0x05 +#define VDAC_VSEL_18 0x03 + +#endif diff --git a/include/asm-arm/arch-omap3/omap_gpmc.h b/include/asm-arm/arch-omap3/omap_gpmc.h new file mode 100644 index 0000000..4edf611 --- /dev/null +++ b/include/asm-arm/arch-omap3/omap_gpmc.h @@ -0,0 +1,84 @@ +/* + * (C) Copyright 2004-2008 Texas Instruments, <www.ti.com> + * Rohit Choraria <rohitkc@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_OMAP_GPMC_H +#define __ASM_ARCH_OMAP_GPMC_H + +#define GPMC_BUF_EMPTY 0 +#define GPMC_BUF_FULL 1 + +#define ECCCLEAR (0x1 << 8) +#define ECCRESULTREG1 (0x1 << 0) +#define ECCSIZE512BYTE 0xFF +#define ECCSIZE1 (ECCSIZE512BYTE << 22) +#define ECCSIZE0 (ECCSIZE512BYTE << 12) +#define ECCSIZE0SEL (0x000 << 0) + +/* Generic ECC Layouts */ +/* Large Page x8 NAND device Layout */ +#ifdef GPMC_NAND_ECC_LP_x8_LAYOUT +#define GPMC_NAND_HW_ECC_LAYOUT {\ + .eccbytes = 12,\ + .eccpos = {1, 2, 3, 4, 5, 6, 7, 8,\ + 9, 10, 11, 12},\ + .oobfree = {\ + {.offset = 13,\ + .length = 51 } } \ +} +#endif + +/* Large Page x16 NAND device Layout */ +#ifdef GPMC_NAND_ECC_LP_x16_LAYOUT +#define GPMC_NAND_HW_ECC_LAYOUT {\ + .eccbytes = 12,\ + .eccpos = {2, 3, 4, 5, 6, 7, 8, 9,\ + 10, 11, 12, 13},\ + .oobfree = {\ + {.offset = 14,\ + .length = 50 } } \ +} +#endif + +/* Small Page x8 NAND device Layout */ +#ifdef GPMC_NAND_ECC_SP_x8_LAYOUT +#define GPMC_NAND_HW_ECC_LAYOUT {\ + .eccbytes = 3,\ + .eccpos = {1, 2, 3},\ + .oobfree = {\ + {.offset = 4,\ + .length = 12 } } \ +} +#endif + +/* Small Page x16 NAND device Layout */ +#ifdef GPMC_NAND_ECC_SP_x16_LAYOUT +#define GPMC_NAND_HW_ECC_LAYOUT {\ + .eccbytes = 3,\ + .eccpos = {2, 3, 4},\ + .oobfree = {\ + {.offset = 5,\ + .length = 11 } } \ +} +#endif + +#endif /* __ASM_ARCH_OMAP_GPMC_H */ + diff --git a/include/asm-arm/arch-omap3/sys_proto.h b/include/asm-arm/arch-omap3/sys_proto.h new file mode 100644 index 0000000..4c624e8 --- /dev/null +++ b/include/asm-arm/arch-omap3/sys_proto.h @@ -0,0 +1,71 @@ +/* + * (C) Copyright 2004-2008 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _SYS_PROTO_H_ +#define _SYS_PROTO_H_ + +typedef struct { + u32 board_type_v1; + u32 board_type_v2; + u32 mtype; + char *cpu_string; + char *board_string; + char *nand_string; +} omap3_sysinfo; + +void prcm_init(void); +void per_clocks_enable(void); + +void memif_init(void); +void sdrc_init(void); +void do_sdrc_init(u32, u32); +void gpmc_init(void); + +void watchdog_init(void); +void set_muxconf_regs(void); + +u32 get_cpu_rev(void); +u32 get_mem_type(void); +u32 get_sysboot_value(void); +u32 is_gpmc_muxed(void); +u32 get_gpmc0_type(void); +u32 get_gpmc0_width(void); +u32 get_board_type(void); +void display_board_info(u32); +u32 get_sdr_cs_size(u32); +u32 get_sdr_cs_offset(u32); +u32 is_running_in_sdram(void); +u32 is_running_in_sram(void); +u32 is_running_in_flash(void); +u32 get_device_type(void); +void l2cache_enable(void); +void secureworld_exit(void); +void setup_auxcr(void); +void try_unlock_memory(void); +u32 get_boot_type(void); +void v7_flush_dcache_all(u32); +void sr32(void *, u32, u32, u32); +u32 wait_on_value(u32, u32, void *, u32); +void sdelay(unsigned long); +void make_cs1_contiguous(void); +void omap_nand_switch_ecc(int); +void power_init_r(void); + +#endif diff --git a/include/configs/SX1.h b/include/configs/SX1.h index fd1a3bd..78c5152 100644 --- a/include/configs/SX1.h +++ b/include/configs/SX1.h @@ -116,7 +116,9 @@ #include <configs/omap1510.h> #define CONFIG_BOOTARGS "mem=16M console=ttyS0,115200n8 root=/dev/mtdblock3 rw" +#ifdef CONFIG_STDOUT_USBTTY #define CONFIG_PREBOOT "setenv stdout usbtty;setenv stdin usbtty" +#endif /* * Miscellaneous configurable options @@ -167,15 +169,19 @@ /*----------------------------------------------------------------------- * FLASH and environment organization + * V1 + * PHYS_FLASH_SIZE_1 (16 << 10) 16 MB + * PHYS_FLASH_SIZE_2 (8 << 10) 8 MB + * V2 only 1 flash + * PHYS_FLASH_SIZE_1 (32 << 10) 32 MB */ #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define PHYS_FLASH_SIZE (16 << 10) /* 16 MB */ #define PHYS_FLASH_SECT_SIZE (128*1024) /* Size of a sector (128kB) */ -#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_SECT (256) /* max number of sectors on one chip */ #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SECT_SIZE) /* addr of environment */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */ #define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE /* Reserve 1 sector */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE } +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, PHYS_FLASH_2 } /*----------------------------------------------------------------------- * FLASH driver setup diff --git a/include/configs/nmdk8815.h b/include/configs/nmdk8815.h new file mode 100644 index 0000000..01de08f --- /dev/null +++ b/include/configs/nmdk8815.h @@ -0,0 +1,188 @@ +/* + * (C) Copyright 2005 + * STMicroelectronics. + * Configuration settings for the STn8815 nomadik board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_ARM926EJS +#define CONFIG_NOMADIK +#define CONFIG_NOMADIK_8815 +#define CONFIG_NOMADIK_NDK15 +#define CONFIG_NOMADIK_NHK15 + +#define CONFIG_SKIP_LOWLEVEL_INIT /* we have already been loaded to RAM */ + +/* commands */ +#include <config_cmd_default.h> +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +/* At this point there is no flash driver, so remove some commands */ +#undef CONFIG_CMD_ENV +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS + +/* user interface */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT "Nomadik> " +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_LOAD_ADDR 0x800000 /* default load address */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE + +/* boot config */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_CMDLINE_TAG +#define CONFIG_BOOTDELAY 1 +#define CONFIG_BOOTARGS "root=/dev/ram0 console=ttyAMA1,115200n8 init=linuxrc" +#define CONFIG_BOOTCOMMAND "fsload 0x100000 kernel.uimg;" \ + " fsload 0x800000 initrd.gz.uimg;" \ + " bootm 0x100000 0x800000" + +/* memory-related information */ +#define CONFIG_NR_DRAM_BANKS 2 +#define PHYS_SDRAM_1 0x00000000 /* DDR-SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ +#define PHYS_SDRAM_2 0x08000000 /* SDR-SDRAM BANK #2*/ +#define PHYS_SDRAM_2_SIZE 0x04000000 /* 64 MB */ + +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +# define CONFIG_STACKSIZE_IRQ (4 * 1024) /* IRQ stack */ +# define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */ +#endif + +#define CONFIG_SYS_MEMTEST_START 0x00000000 +#define CONFIG_SYS_MEMTEST_END 0x0FFFFFFF +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256 * 1024) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* for initial data */ + +#define CONFIG_MISC_INIT_R /* call misc_init_r during start up */ + +/* timing informazion */ +#define CONFIG_SYS_HZ (2400000 / 256) /* Timer0: 2.4Mhz + divider */ +#define CONFIG_SYS_TIMERBASE 0x101E2000 +#undef CONFIG_SYS_CLKS_IN_HZ + +/* serial port (PL011) configuration */ +#define CONFIG_PL011_SERIAL +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CFG_SERIAL0 0x101FD000 +#define CFG_SERIAL1 0x101FB000 + +#define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1 } +#define CONFIG_PL011_CLOCK 48000000 + +/* Ethernet */ +#define PCI_MEMORY_VADDR 0xe8000000 +#define PCI_IO_VADDR 0xee000000 +#define __io(a) ((void __iomem *)(PCI_IO_VADDR + (a))) +#define __mem_isa(a) ((a) + PCI_MEMORY_VADDR) + +#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111*/ +#define CONFIG_SMC91111_BASE 0x34000300 +#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ +#define CONFIG_SMC_USE_32_BIT +#define CONFIG_BOOTFILE "uImage" + +/* flash memory and filesystem information */ +#define CONFIG_DOS_PARTITION +#define CONFIG_MTD_ONENAND_VERIFY_WRITE +#define CONFIG_SYS_ONENAND_BASE 0x30000000 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 + +#define CONFIG_SYS_NO_FLASH + +#ifdef CONFIG_BOOT_ONENAND + +# undef CONFIG_CMD_NAND /* Temporary: nand and onenand can't coexist */ + /* Partition Size Start + * XloaderTOC + X-Loader 256KB 0x00000000 + * Memory init function 256KB 0x00040000 + * U-Boot 2MB 0x00080000 + * Sysimage (kernel + ramdisk) 4MB 0x00280000 + * JFFS2 Root filesystem 22MB 0x00680000 + * JFFS2 User Data 227.5MB 0x01C80000 + */ +# define CONFIG_JFFS2_PART_SIZE 0x400000 +# define CONFIG_JFFS2_PART_OFFSET 0x280000 + +# define CONFIG_ENV_IS_IN_ONENAND +# define CONFIG_ENV_SIZE (256 * 1024) +# define CONFIG_ENV_ADDR 0x30300000 + +#else /* ! CONFIG_BOOT_ONENAND */ + +# undef CONFIG_CMD_ONENAND /* Temporary: nand and onenand can't coexist */ + +# define CONFIG_JFFS2_DEV "nand0" +# define CONFIG_JFFS2_NAND 1 /* For the jffs2 support*/ +# define CONFIG_JFFS2_PART_SIZE 0x00300000 +# define CONFIG_JFFS2_PART_OFFSET 0x00280000 + +# define CONFIG_ENV_IS_IN_NAND +# define CONFIG_ENV_SIZE 0x20000 /*128 Kb*/ +# define CONFIG_ENV_OFFSET (0x8000000 - CONFIG_ENV_SIZE) + +#endif /* CONFIG_BOOT_ONENAND */ + +/* Temporarily, until we have no driver, env is not in nand */ +#undef CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_IS_NOWHERE + +/* this is needed to make hello_world.c and other stuff happy */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 + +/* base addresses of our peripherals */ +#define NOMADIK_SRC_BASE 0x101E0000 /* System and Reset Cnt */ +#define NOMADIK_PMU_BASE 0x101E9000 /* Power Management Unit */ +#define NOMADIK_MPMC_BASE 0x10110000 /* SDRAM Controller */ +#define NOMADIK_FSMC_BASE 0x10100000 /* FSMC Controller */ +#define NOMADIK_1NAND_BASE 0x30000000 +#define NOMADIK_GPIO0_BASE 0x101E4000 +#define NOMADIK_GPIO1_BASE 0x101E5000 +#define NOMADIK_GPIO2_BASE 0x101E6000 +#define NOMADIK_GPIO3_BASE 0x101E7000 +#define NOMADIK_CPLD_BASE 0x36000000 +#define NOMADIK_UART0_BASE 0x101FD000 +#define NOMADIK_UART1_BASE 0x101FB000 +#define NOMADIK_UART2_BASE 0x101F2000 + +#define NOMADIK_I2C1_BASE 0x101F7000 /* I2C1 interface */ +#define NOMADIK_I2C0_BASE 0x101F8000 /* I2C0 interface */ + +#define NOMADIK_RTC_BASE 0x101E8000 +#define NOMADIK_ETH0_BASE 0x36800300 +#define NOMADIK_CPLD_UART_BASE 0x36480000 + +#endif /* __CONFIG_H */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h new file mode 100644 index 0000000..9057606 --- /dev/null +++ b/include/configs/omap3_beagle.h @@ -0,0 +1,325 @@ +/* + * (C) Copyright 2006-2008 + * Texas Instruments. + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <x0khasim@ti.com> + * + * Configuration settings for the TI OMAP3530 Beagle board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H +#include <asm/sizes.h> + +/* + * High Level Configuration Options + */ +#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP34XX 1 /* which is a 34XX */ +#define CONFIG_OMAP3430 1 /* which is in a 3430 */ +#define CONFIG_OMAP3_BEAGLE 1 /* working with BEAGLE */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/omap3.h> + +/* Clock Defines */ +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* + * Size of malloc() pool + */ +#define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ + /* Sector */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ + /* initial data */ + +/* + * Hardware drivers + */ + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK + +/* + * select serial console configuration + */ +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 3 /* UART3 on Beagle Rev 2 */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} +#define CONFIG_MMC 1 +#define CONFIG_OMAP3_MMC 1 +#define CONFIG_DOS_PARTITION 1 + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ + +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_NAND /* NAND support */ + +#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMI /* iminfo */ +#undef CONFIG_CMD_IMLS /* List all found images */ +#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#undef CONFIG_CMD_NFS /* NFS support */ + +#define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_BUS 0 +#define CONFIG_SYS_I2C_BUS_SELECT 1 +#define CONFIG_DRIVER_OMAP34XX_I2C 1 + +/* + * Board NAND Info. + */ +#define CONFIG_NAND_OMAP_GPMC +#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ + /* to access nand */ +#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ + /* to access nand at */ + /* CS0 */ +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ + /* devices */ +#define SECTORSIZE 512 + +#define NAND_ALLOW_ERASE_ALL +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 +#define NAND_NO_RB 1 +#define CONFIG_SYS_NAND_WP + +#define CONFIG_JFFS2_NAND +/* nand device jffs2 lives on */ +#define CONFIG_JFFS2_DEV "nand0" +/* start of jffs2 partition */ +#define CONFIG_JFFS2_PART_OFFSET 0x680000 +#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ + /* partition */ + +/* Environment information */ +#define CONFIG_BOOTDELAY 10 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "console=ttyS2,115200n8\0" \ + "videomode=1024x768@60,vxres=1024,vyres=768\0" \ + "videospec=omapfb:vram:2M,vram:4M\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "video=${videospec},mode:${videomode} " \ + "root=/dev/mmcblk0p2 rw " \ + "rootfstype=ext3 rootwait\0" \ + "nandargs=setenv bootargs console=${console} " \ + "video=${videospec},mode:${videomode} " \ + "root=/dev/mtdblock4 rw " \ + "rootfstype=jffs2\0" \ + "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "autoscr ${loadaddr}\0" \ + "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${loadaddr} 280000 400000; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "if mmcinit; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run nandboot; " \ + "fi; " \ + "fi; " \ + "else run nandboot; fi" + +#define CONFIG_AUTO_COMPLETE 1 +/* + * Miscellaneous configurable options + */ +#define V_PROMPT "OMAP3 beagleboard.org # " + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT V_PROMPT +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */ + /* works on */ +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ + 0x01F00000) /* 31MB */ + +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */ + /* load address */ + +/* + * 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by + * 32KHz clk, or from external sig. This rate is divided by a local divisor. + */ +#define V_PVT 7 + +#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) +#define CONFIG_SYS_PVT V_PVT /* 2^(pvt+1) */ +#define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PVT)) + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE SZ_128K /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ +#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 + +/* SDRAM Bank Allocation method */ +#define SDRC_R_B_C 1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* **** PISMO SUPPORT *** */ + +/* Configure the PISMO */ +#define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M + +#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */ + /* one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ +#define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ + +#define CONFIG_SYS_FLASH_BASE boot_flash_base + +/* Monitor at start of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP + +#define CONFIG_ENV_IS_IN_NAND 1 +#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ +#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ + +#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec +#define CONFIG_ENV_OFFSET boot_flash_off +#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET + +/*----------------------------------------------------------------------- + * CFI FLASH driver setup + */ +/* timeout values are in ticks */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) + +/* Flash banks JFFS2 should use */ +#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ + CONFIG_SYS_MAX_NAND_DEVICE) +#define CONFIG_SYS_JFFS2_MEM_NAND +/* use flash_info[2] */ +#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS +#define CONFIG_SYS_JFFS2_NUM_BANKS 1 + +#ifndef __ASSEMBLY__ +extern gpmc_csx_t *nand_cs_base; +extern gpmc_t *gpmc_cfg_base; +extern unsigned int boot_flash_base; +extern volatile unsigned int boot_flash_env_addr; +extern unsigned int boot_flash_off; +extern unsigned int boot_flash_sec; +extern unsigned int boot_flash_type; +#endif + + +#define WRITE_NAND_COMMAND(d, adr)\ + writel(d, &nand_cs_base->nand_cmd) +#define WRITE_NAND_ADDRESS(d, adr)\ + writel(d, &nand_cs_base->nand_adr) +#define WRITE_NAND(d, adr) writew(d, &nand_cs_base->nand_dat) +#define READ_NAND(adr) readl(&nand_cs_base->nand_dat) + +/* Other NAND Access APIs */ +#define NAND_WP_OFF() do {readl(&gpmc_cfg_base->config) |= GPMC_CONFIG_WP; } \ + while (0) +#define NAND_WP_ON() do {readl(&gpmc_cfg_base->config) &= ~GPMC_CONFIG_WP; } \ + while (0) +#define NAND_DISABLE_CE(nand) +#define NAND_ENABLE_CE(nand) +#define NAND_WAIT_READY(nand) udelay(10) + +#endif /* __CONFIG_H */ diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h new file mode 100644 index 0000000..f4498a9 --- /dev/null +++ b/include/configs/omap3_evm.h @@ -0,0 +1,345 @@ +/* + * (C) Copyright 2006-2008 + * Texas Instruments. + * Author : + * Manikandan Pillai <mani.pillai@ti.com> + * Derived from Beagle Board and 3430 SDP code by + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * Manikandan Pillai <mani.pillai@ti.com> + * + * Configuration settings for the TI OMAP3 EVM board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H +#include <asm/sizes.h> + +/* + * High Level Configuration Options + */ +#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP34XX 1 /* which is a 34XX */ +#define CONFIG_OMAP3430 1 /* which is in a 3430 */ +#define CONFIG_OMAP3_EVM 1 /* working with EVM */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/omap3.h> + +/* Clock Defines */ +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* + * Size of malloc() pool + */ +#define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ + /* Sector */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ + /* initial data */ + +/* + * Hardware drivers + */ + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK + +/* + * select serial console configuration + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 +#define CONFIG_SERIAL1 1 /* UART1 on OMAP3 EVM */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} +#define CONFIG_MMC 1 +#define CONFIG_OMAP3_MMC 1 +#define CONFIG_DOS_PARTITION 1 + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ + +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_ONENAND /* ONENAND support */ +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING + +#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMI /* iminfo */ +#undef CONFIG_CMD_IMLS /* List all found images */ + +#define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_BUS 0 +#define CONFIG_SYS_I2C_BUS_SELECT 1 +#define CONFIG_DRIVER_OMAP34XX_I2C 1 + +/* + * Board NAND Info. + */ +#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ + /* to access nand */ +#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ + /* to access */ + /* nand at CS0 */ + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ + /* NAND devices */ +#define SECTORSIZE 512 + +#define NAND_ALLOW_ERASE_ALL +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 +#define NAND_NO_RB 1 +#define CONFIG_SYS_NAND_WP + +#define CONFIG_JFFS2_NAND +/* nand device jffs2 lives on */ +#define CONFIG_JFFS2_DEV "nand0" +/* start of jffs2 partition */ +#define CONFIG_JFFS2_PART_OFFSET 0x680000 +#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */ + +/* Environment information */ +#define CONFIG_BOOTDELAY 10 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "console=ttyS2,115200n8\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "root=/dev/mmcblk0p2 rw " \ + "rootfstype=ext3 rootwait\0" \ + "nandargs=setenv bootargs console=${console} " \ + "root=/dev/mtdblock4 rw " \ + "rootfstype=jffs2\0" \ + "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "autoscr ${loadaddr}\0" \ + "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "onenand read ${loadaddr} 280000 400000; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "if mmcinit; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run nandboot; " \ + "fi; " \ + "fi; " \ + "else run nandboot; fi" + +#define CONFIG_AUTO_COMPLETE 1 +/* + * Miscellaneous configurable options + */ +#define V_PROMPT "OMAP3_EVM # " + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT V_PROMPT +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command */ + /* args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ + 0x01F00000) /* 31MB */ + +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, */ + /* in Hz */ + +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ + /* address */ + +/* + * 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by + * 32KHz clk, or from external sig. This rate is divided by a local divisor. + */ +#define V_PVT 7 + +#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 +#define CONFIG_SYS_PVT V_PVT /* 2^(pvt+1) */ +#define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PVT)) + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE SZ_128K /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ +#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 + +/* SDRAM Bank Allocation method */ +#define SDRC_R_B_C 1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* **** PISMO SUPPORT *** */ + +/* Configure the PISMO */ +#define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M + +#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ + /* on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ +#define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ + +#define CONFIG_SYS_FLASH_BASE boot_flash_base + +/* Monitor at start of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP + +#define CONFIG_ENV_IS_IN_ONENAND 1 +#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ +#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ + +#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec +#define CONFIG_ENV_OFFSET boot_flash_off +#define CONFIG_ENV_ADDR boot_flash_env_addr + +/*----------------------------------------------------------------------- + * CFI FLASH driver setup + */ +/* timeout values are in ticks */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) + +/* Flash banks JFFS2 should use */ +#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ + CONFIG_SYS_MAX_NAND_DEVICE) +#define CONFIG_SYS_JFFS2_MEM_NAND +/* use flash_info[2] */ +#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS +#define CONFIG_SYS_JFFS2_NUM_BANKS 1 + +#ifndef __ASSEMBLY__ +extern gpmc_csx_t *nand_cs_base; +extern gpmc_t *gpmc_cfg_base; +extern unsigned int boot_flash_base; +extern volatile unsigned int boot_flash_env_addr; +extern unsigned int boot_flash_off; +extern unsigned int boot_flash_sec; +extern unsigned int boot_flash_type; +#endif + + +#define WRITE_NAND_COMMAND(d, adr)\ + writel(d, &nand_cs_base->nand_cmd) +#define WRITE_NAND_ADDRESS(d, adr)\ + writel(d, &nand_cs_base->nand_adr) +#define WRITE_NAND(d, adr) writew(d, &nand_cs_base->nand_dat) +#define READ_NAND(adr) readl(&nand_cs_base->nand_dat) + +/* Other NAND Access APIs */ +#define NAND_WP_OFF() do {readl(&gpmc_cfg_base->config) |= GPMC_CONFIG_WP; } \ + while (0) +#define NAND_WP_ON() do {readl(&gpmc_cfg_base->config) &= ~GPMC_CONFIG_WP; } \ + while (0) +#define NAND_DISABLE_CE(nand) +#define NAND_ENABLE_CE(nand) +#define NAND_WAIT_READY(nand) udelay(10) + +/*---------------------------------------------------------------------------- + * SMSC9115 Ethernet from SMSC9118 family + *---------------------------------------------------------------------------- + */ +#if defined(CONFIG_CMD_NET) + +#define CONFIG_DRIVER_SMC911X +#define CONFIG_DRIVER_SMC911X_32_BIT +#define CONFIG_DRIVER_SMC911X_BASE 0x2C000000 + +#endif /* (CONFIG_CMD_NET) */ + +/* + * BOOTP fields + */ + +#define CONFIG_BOOTP_SUBNETMASK 0x00000001 +#define CONFIG_BOOTP_GATEWAY 0x00000002 +#define CONFIG_BOOTP_HOSTNAME 0x00000004 +#define CONFIG_BOOTP_BOOTPATH 0x00000010 + +#endif /* __CONFIG_H */ diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h new file mode 100644 index 0000000..dee0417 --- /dev/null +++ b/include/configs/omap3_overo.h @@ -0,0 +1,318 @@ +/* + * Configuration settings for the Gumstix Overo board. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H +#include <asm/sizes.h> + +/* + * High Level Configuration Options + */ +#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP34XX 1 /* which is a 34XX */ +#define CONFIG_OMAP3430 1 /* which is in a 3430 */ +#define CONFIG_OMAP3_OVERO 1 /* working with overo */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/omap3.h> + +/* Clock Defines */ +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* + * Size of malloc() pool + */ +#define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ + /* Sector */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ + /* initial data */ + +/* + * Hardware drivers + */ + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK + +/* + * select serial console configuration + */ +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 3 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \ + 115200} +#define CONFIG_MMC 1 +#define CONFIG_OMAP3_MMC 1 +#define CONFIG_DOS_PARTITION 1 + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ + +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_NAND /* NAND support */ + +#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMI /* iminfo */ +#undef CONFIG_CMD_IMLS /* List all found images */ +#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#undef CONFIG_CMD_NFS /* NFS support */ + +#define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_BUS 0 +#define CONFIG_SYS_I2C_BUS_SELECT 1 +#define CONFIG_DRIVER_OMAP34XX_I2C 1 + +/* + * Board NAND Info. + */ +#define CONFIG_NAND_OMAP_GPMC +#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ + /* to access nand */ +#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ + /* to access nand */ + /* at CS0 */ +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ + /* devices */ +#define SECTORSIZE 512 + +#define NAND_ALLOW_ERASE_ALL +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 +#define NAND_NO_RB 1 +#define CONFIG_SYS_NAND_WP + +#define CONFIG_JFFS2_NAND +/* nand device jffs2 lives on */ +#define CONFIG_JFFS2_DEV "nand0" +/* start of jffs2 partition */ +#define CONFIG_JFFS2_PART_OFFSET 0x680000 +#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ + /* partition */ + +/* Environment information */ +#define CONFIG_BOOTDELAY 5 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "console=ttyS2,115200n8\0" \ + "videomode=1024x768@60,vxres=1024,vyres=768\0" \ + "videospec=omapfb:vram:2M,vram:4M\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "video=${videospec},mode:${videomode} " \ + "root=/dev/mmcblk0p2 rw " \ + "rootfstype=ext3 rootwait\0" \ + "nandargs=setenv bootargs console=${console} " \ + "video=${videospec},mode:${videomode} " \ + "root=/dev/mtdblock4 rw " \ + "rootfstype=jffs2\0" \ + "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "autoscr ${loadaddr}\0" \ + "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${loadaddr} 280000 400000; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "if mmcinit; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run nandboot; " \ + "fi; " \ + "fi; " \ + "else run nandboot; fi" + +#define CONFIG_AUTO_COMPLETE 1 +/* + * Miscellaneous configurable options + */ +#define V_PROMPT "Overo # " + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT V_PROMPT +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command */ + /* args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ + 0x01F00000) /* 31MB */ + +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, */ + /* in Hz */ + +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ + /* address */ + +/* + * 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by + * 32KHz clk, or from external sig. This rate is divided by a local divisor. + */ +#define V_PVT 7 + +#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) +#define CONFIG_SYS_PVT V_PVT /* 2^(pvt+1) */ +#define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PVT)) + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE SZ_128K /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ +#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 + +/* SDRAM Bank Allocation method */ +#define SDRC_R_B_C 1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* **** PISMO SUPPORT *** */ + +/* Configure the PISMO */ +#define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M + +#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */ + /* one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ +#define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ + +#define CONFIG_SYS_FLASH_BASE boot_flash_base + +/* Monitor at start of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP + +#define CONFIG_ENV_IS_IN_NAND 1 +#define ONENAND_ENV_OFFSET 0x240000 /* environment starts here */ +#define SMNAND_ENV_OFFSET 0x240000 /* environment starts here */ + +#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec +#define CONFIG_ENV_OFFSET boot_flash_off +#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET + +/*----------------------------------------------------------------------- + * CFI FLASH driver setup + */ +/* timeout values are in ticks */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) + +/* Flash banks JFFS2 should use */ +#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ + CONFIG_SYS_MAX_NAND_DEVICE) +#define CONFIG_SYS_JFFS2_MEM_NAND +/* use flash_info[2] */ +#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS +#define CONFIG_SYS_JFFS2_NUM_BANKS 1 + +#ifndef __ASSEMBLY__ +extern gpmc_csx_t *nand_cs_base; +extern gpmc_t *gpmc_cfg_base; +extern unsigned int boot_flash_base; +extern volatile unsigned int boot_flash_env_addr; +extern unsigned int boot_flash_off; +extern unsigned int boot_flash_sec; +extern unsigned int boot_flash_type; +#endif + + +#define WRITE_NAND_COMMAND(d, adr)\ + writel(d, &nand_cs_base->nand_cmd) +#define WRITE_NAND_ADDRESS(d, adr)\ + writel(d, &nand_cs_base->nand_adr) +#define WRITE_NAND(d, adr) writew(d, &nand_cs_base->nand_dat) +#define READ_NAND(adr) readl(&nand_cs_base->nand_dat) + +/* Other NAND Access APIs */ +#define NAND_WP_OFF() do {readl(&gpmc_cfg_base->config) |= GPMC_CONFIG_WP; } \ + while (0) +#define NAND_WP_ON() do {readl(&gpmc_cfg_base->config) &= ~GPMC_CONFIG_WP; } \ + while (0) +#define NAND_DISABLE_CE(nand) +#define NAND_ENABLE_CE(nand) +#define NAND_WAIT_READY(nand) udelay(10) + +#endif /* __CONFIG_H */ diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h new file mode 100644 index 0000000..00c0374 --- /dev/null +++ b/include/configs/omap3_pandora.h @@ -0,0 +1,320 @@ +/* + * (C) Copyright 2008 + * Grazvydas Ignotas <notasas@gmail.com> + * + * Configuration settings for the OMAP3 Pandora. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H +#include <asm/sizes.h> + +/* + * High Level Configuration Options + */ +#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP34XX 1 /* which is a 34XX */ +#define CONFIG_OMAP3430 1 /* which is in a 3430 */ +#define CONFIG_OMAP3_PANDORA 1 /* working with pandora */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/omap3.h> + +/* Clock Defines */ +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* + * Size of malloc() pool + */ +#define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ + /* Sector */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ + /* initial data */ + +/* + * Hardware drivers + */ + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK + +/* + * select serial console configuration + */ +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 3 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \ + 115200} +#define CONFIG_MMC 1 +#define CONFIG_OMAP3_MMC 1 +#define CONFIG_DOS_PARTITION 1 + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ + +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_NAND /* NAND support */ + +#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMI /* iminfo */ +#undef CONFIG_CMD_IMLS /* List all found images */ +#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#undef CONFIG_CMD_NFS /* NFS support */ + +#define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_BUS 0 +#define CONFIG_SYS_I2C_BUS_SELECT 1 +#define CONFIG_DRIVER_OMAP34XX_I2C 1 + +/* + * Board NAND Info. + */ +#define CONFIG_NAND_OMAP_GPMC +#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ + /* to access nand */ +#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ + /* to access nand */ + /* at CS0 */ +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ + /* devices */ +#define SECTORSIZE 512 + +#define NAND_ALLOW_ERASE_ALL +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 +#define NAND_NO_RB 1 +#define CONFIG_SYS_NAND_WP + +#define CONFIG_JFFS2_NAND +/* nand device jffs2 lives on */ +#define CONFIG_JFFS2_DEV "nand0" +/* start of jffs2 partition */ +#define CONFIG_JFFS2_PART_OFFSET 0x680000 +#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ + /* partition */ + +/* Environment information */ +#define CONFIG_BOOTDELAY 1 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "console=ttyS0,115200n8\0" \ + "videospec=omapfb:vram:2M,vram:4M\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "video=${videospec} " \ + "root=/dev/mmcblk0p2 rw " \ + "rootfstype=ext3 rootwait\0" \ + "nandargs=setenv bootargs console=${console} " \ + "video=${videospec} " \ + "root=/dev/mtdblock4 rw " \ + "rootfstype=jffs2\0" \ + "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "autoscr ${loadaddr}\0" \ + "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${loadaddr} 280000 400000; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "if mmcinit; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run nandboot; " \ + "fi; " \ + "fi; " \ + "else run nandboot; fi" + +#define CONFIG_AUTO_COMPLETE 1 +/* + * Miscellaneous configurable options + */ +#define V_PROMPT "Pandora # " + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT V_PROMPT +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command */ + /* args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ + 0x01F00000) /* 31MB */ + +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, */ + /* in Hz */ + +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ + /* address */ + +/* + * 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by + * 32KHz clk, or from external sig. This rate is divided by a local divisor. + */ +#define V_PVT 7 + +#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) +#define CONFIG_SYS_PVT V_PVT /* 2^(pvt+1) */ +#define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PVT)) + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE SZ_128K /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ +#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 + +/* SDRAM Bank Allocation method */ +#define SDRC_R_B_C 1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* **** PISMO SUPPORT *** */ + +/* Configure the PISMO */ +#define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M + +#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */ + /* one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ +#define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ + +#define CONFIG_SYS_FLASH_BASE boot_flash_base + +/* Monitor at start of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP + +#define CONFIG_ENV_IS_IN_NAND 1 +#define ONENAND_ENV_OFFSET 0x240000 /* environment starts here */ +#define SMNAND_ENV_OFFSET 0x240000 /* environment starts here */ + +#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec +#define CONFIG_ENV_OFFSET boot_flash_off +#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET + +/*----------------------------------------------------------------------- + * CFI FLASH driver setup + */ +/* timeout values are in ticks */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) + +/* Flash banks JFFS2 should use */ +#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ + CONFIG_SYS_MAX_NAND_DEVICE) +#define CONFIG_SYS_JFFS2_MEM_NAND +/* use flash_info[2] */ +#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS +#define CONFIG_SYS_JFFS2_NUM_BANKS 1 + +#ifndef __ASSEMBLY__ +extern gpmc_csx_t *nand_cs_base; +extern gpmc_t *gpmc_cfg_base; +extern unsigned int boot_flash_base; +extern volatile unsigned int boot_flash_env_addr; +extern unsigned int boot_flash_off; +extern unsigned int boot_flash_sec; +extern unsigned int boot_flash_type; +#endif + + +#define WRITE_NAND_COMMAND(d, adr)\ + writel(d, &nand_cs_base->nand_cmd) +#define WRITE_NAND_ADDRESS(d, adr)\ + writel(d, &nand_cs_base->nand_adr) +#define WRITE_NAND(d, adr) writew(d, &nand_cs_base->nand_dat) +#define READ_NAND(adr) readl(&nand_cs_base->nand_dat) + +/* Other NAND Access APIs */ +#define NAND_WP_OFF() do {readl(&gpmc_cfg_base->config) |= GPMC_CONFIG_WP; } \ + while (0) +#define NAND_WP_ON() do {readl(&gpmc_cfg_base->config) &= ~GPMC_CONFIG_WP; } \ + while (0) +#define NAND_DISABLE_CE(nand) +#define NAND_ENABLE_CE(nand) +#define NAND_WAIT_READY(nand) udelay(10) + +#endif /* __CONFIG_H */ diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h new file mode 100644 index 0000000..54d2416 --- /dev/null +++ b/include/configs/omap3_zoom1.h @@ -0,0 +1,326 @@ +/* + * (C) Copyright 2006-2008 + * Texas Instruments. + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <x0khasim@ti.com> + * Nishanth Menon <nm@ti.com> + * + * Configuration settings for the TI OMAP3430 Zoom MDK board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H +#include <asm/sizes.h> + +/* + * High Level Configuration Options + */ +#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP34XX 1 /* which is a 34XX */ +#define CONFIG_OMAP3430 1 /* which is in a 3430 */ +#define CONFIG_OMAP3_ZOOM1 1 /* working with Zoom MDK Rev1 */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/omap3.h> + +/* Clock Defines */ +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* + * Size of malloc() pool + */ +#define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ + /* Sector */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ + /* initial data */ + +/* + * Hardware drivers + */ + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK + +/* + * select serial console configuration + */ +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 3 /* UART3 */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} +#define CONFIG_MMC 1 +#define CONFIG_OMAP3_MMC 1 +#define CONFIG_DOS_PARTITION 1 + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ + +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_NAND /* NAND support */ + +#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMI /* iminfo */ +#undef CONFIG_CMD_IMLS /* List all found images */ +#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#undef CONFIG_CMD_NFS /* NFS support */ + +#define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_BUS 0 +#define CONFIG_SYS_I2C_BUS_SELECT 1 +#define CONFIG_DRIVER_OMAP34XX_I2C 1 + +/* + * Board NAND Info. + */ +#define CONFIG_NAND_OMAP_GPMC +#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ + /* to access nand */ +#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ + /* to access nand at */ + /* CS0 */ +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ + /* devices */ +#define SECTORSIZE 512 + +#define NAND_ALLOW_ERASE_ALL +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 +#define NAND_NO_RB 1 +#define CONFIG_SYS_NAND_WP + +#define CONFIG_JFFS2_NAND +/* nand device jffs2 lives on */ +#define CONFIG_JFFS2_DEV "nand0" +/* start of jffs2 partition */ +#define CONFIG_JFFS2_PART_OFFSET 0x680000 +#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ + /* partition */ + +/* Environment information */ +#define CONFIG_BOOTDELAY 10 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "console=ttyS2,115200n8\0" \ + "videomode=1024x768@60,vxres=1024,vyres=768\0" \ + "videospec=omapfb:vram:2M,vram:4M\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "video=${videospec},mode:${videomode} " \ + "root=/dev/mmcblk0p2 rw " \ + "rootfstype=ext3 rootwait\0" \ + "nandargs=setenv bootargs console=${console} " \ + "video=${videospec},mode:${videomode} " \ + "root=/dev/mtdblock4 rw " \ + "rootfstype=jffs2\0" \ + "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "autoscr ${loadaddr}\0" \ + "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${loadaddr} 280000 400000; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "if mmcinit; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run nandboot; " \ + "fi; " \ + "fi; " \ + "else run nandboot; fi" + +#define CONFIG_AUTO_COMPLETE 1 +/* + * Miscellaneous configurable options + */ +#define V_PROMPT "OMAP3 Zoom1# " + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT V_PROMPT +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */ + /* works on */ +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ + 0x01F00000) /* 31MB */ + +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */ + /* load address */ + +/* + * 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by + * 32KHz clk, or from external sig. This rate is divided by a local divisor. + */ +#define V_PVT 7 + +#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) +#define CONFIG_SYS_PVT V_PVT /* 2^(pvt+1) */ +#define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PVT)) + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE SZ_128K /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ +#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 + +/* SDRAM Bank Allocation method */ +#define SDRC_R_B_C 1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* **** PISMO SUPPORT *** */ + +/* Configure the PISMO */ +#define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M + +#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */ + /* one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ +#define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ + +#define CONFIG_SYS_FLASH_BASE boot_flash_base + +/* Monitor at start of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP + +#define CONFIG_ENV_IS_IN_NAND 1 +#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ +#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ + +#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec +#define CONFIG_ENV_OFFSET boot_flash_off +#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET + +/*----------------------------------------------------------------------- + * CFI FLASH driver setup + */ +/* timeout values are in ticks */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) + +/* Flash banks JFFS2 should use */ +#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ + CONFIG_SYS_MAX_NAND_DEVICE) +#define CONFIG_SYS_JFFS2_MEM_NAND +/* use flash_info[2] */ +#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS +#define CONFIG_SYS_JFFS2_NUM_BANKS 1 + +#ifndef __ASSEMBLY__ +extern gpmc_csx_t *nand_cs_base; +extern gpmc_t *gpmc_cfg_base; +extern unsigned int boot_flash_base; +extern volatile unsigned int boot_flash_env_addr; +extern unsigned int boot_flash_off; +extern unsigned int boot_flash_sec; +extern unsigned int boot_flash_type; +#endif + + +#define WRITE_NAND_COMMAND(d, adr)\ + writel(d, &nand_cs_base->nand_cmd) +#define WRITE_NAND_ADDRESS(d, adr)\ + writel(d, &nand_cs_base->nand_adr) +#define WRITE_NAND(d, adr) writew(d, &nand_cs_base->nand_dat) +#define READ_NAND(adr) readl(&nand_cs_base->nand_dat) + +/* Other NAND Access APIs */ +#define NAND_WP_OFF() do {readl(&gpmc_cfg_base->config) |= GPMC_CONFIG_WP; } \ + while (0) +#define NAND_WP_ON() do {readl(&gpmc_cfg_base->config) &= ~GPMC_CONFIG_WP; } \ + while (0) +#define NAND_DISABLE_CE(nand) +#define NAND_ENABLE_CE(nand) +#define NAND_WAIT_READY(nand) udelay(10) + +#endif /* __CONFIG_H */ |