summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--board/amcc/yucca/init.S83
-rw-r--r--board/amcc/yucca/yucca.c316
-rw-r--r--include/configs/yucca.h14
3 files changed, 35 insertions, 378 deletions
diff --git a/board/amcc/yucca/init.S b/board/amcc/yucca/init.S
index c9eca68..c92dcf7 100644
--- a/board/amcc/yucca/init.S
+++ b/board/amcc/yucca/init.S
@@ -1,4 +1,7 @@
/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
* Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
*
* See file CREDITS for list of people who contributed to this
@@ -19,56 +22,10 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
-/* port to AMCC 440SPE evaluatioon board - SG April 12,2005 */
#include <ppc_asm.tmpl>
#include <config.h>
-
-/* General */
-#define TLB_VALID 0x00000200
-
-/* Supported page sizes */
-
-#define SZ_1K 0x00000000
-#define SZ_4K 0x00000010
-#define SZ_16K 0x00000020
-#define SZ_64K 0x00000030
-#define SZ_256K 0x00000040
-#define SZ_1M 0x00000050
-#define SZ_16M 0x00000070
-#define SZ_256M 0x00000090
-
-/* Storage attributes */
-#define SA_W 0x00000800 /* Write-through */
-#define SA_I 0x00000400 /* Caching inhibited */
-#define SA_M 0x00000200 /* Memory coherence */
-#define SA_G 0x00000100 /* Guarded */
-#define SA_E 0x00000080 /* Endian */
-
-/* Access control */
-#define AC_X 0x00000024 /* Execute */
-#define AC_W 0x00000012 /* Write */
-#define AC_R 0x00000009 /* Read */
-
-/* Some handy macros */
-
-#define EPN(e) ((e) & 0xfffffc00)
-#define TLB0(epn,sz) ((EPN((epn)) | (sz) | TLB_VALID ))
-#define TLB1(rpn,erpn) (((rpn) & 0xfffffc00) | (erpn))
-#define TLB2(a) ((a) & 0x00000fbf)
-
-#define tlbtab_start\
- mflr r1 ;\
- bl 0f ;
-
-#define tlbtab_end\
- .long 0, 0, 0 ;\
-0: mflr r0 ;\
- mtlr r1 ;\
- blr ;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
- .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+#include <asm-ppc/mmu.h>
/**************************************************************************
* TLB TABLE
@@ -89,12 +46,18 @@
.globl tlbtabA
tlbtabA:
tlbtab_start
- tlbentry(0xfff00000, SZ_16M, 0xfff00000, 4, AC_R|AC_W|AC_X|SA_G)
- tlbentry(CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry(CFG_SDRAM_BASE + 0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry(CFG_SDRAM_BASE + 0x20000000, SZ_256M, 0x20000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry(CFG_SDRAM_BASE + 0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+ /*
+ * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+ * speed up boot process. It is patched after relocation to enable SA_I
+ */
+ tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G)
+
+ /*
+ * TLB entries for SDRAM are not needed on this platform.
+ * They are dynamically generated in the SPD DDR(2) detection
+ * routine.
+ */
tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
tlbentry(CFG_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_R|AC_W|SA_I)
@@ -126,12 +89,18 @@ tlbtabA:
.globl tlbtabB
tlbtabB:
tlbtab_start
- tlbentry(0xfff00000, SZ_16M, 0xfff00000, 4, AC_R|AC_W|AC_X|SA_G)
- tlbentry(CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry(CFG_SDRAM_BASE + 0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry(CFG_SDRAM_BASE + 0x20000000, SZ_256M, 0x20000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry(CFG_SDRAM_BASE + 0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+ /*
+ * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+ * speed up boot process. It is patched after relocation to enable SA_I
+ */
+ tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G)
+
+ /*
+ * TLB entries for SDRAM are not needed on this platform.
+ * They are dynamically generated in the SPD DDR(2) detection
+ * routine.
+ */
tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
tlbentry(CFG_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_R|AC_W|SA_I)
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
index e9b34dd..90eaab1 100644
--- a/board/amcc/yucca/yucca.c
+++ b/board/amcc/yucca/yucca.c
@@ -44,8 +44,6 @@ int compare_to_true(char *str );
char *remove_l_w_space(char *in_str );
char *remove_t_w_space(char *in_str );
int get_console_port(void);
-unsigned long ppcMfcpr(unsigned long cpr_reg);
-unsigned long ppcMfsdr(unsigned long sdr_reg);
int ppc440spe_init_pcie_rootport(int port);
void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
@@ -221,7 +219,7 @@ int board_early_init_f (void)
|
+-------------------------------------------------------------------*/
/* Read Pin Strap Register in PPC440SP */
- sdr0_pinstp = ppcMfsdr(SDR0_PINSTP);
+ mfsdr(SDR0_PINSTP, sdr0_pinstp);
bootstrap_settings = sdr0_pinstp & SDR0_PINSTP_BOOTSTRAP_MASK;
switch (bootstrap_settings) {
@@ -246,7 +244,7 @@ int board_early_init_f (void)
* Boot Settings in IIC EEprom address 0x50 or 0x54
* Read Serial Device Strap Register1 in PPC440SPe
*/
- sdr0_sdstp1 = ppcMfsdr(SDR0_SDSTP1);
+ mfsdr(SDR0_SDSTP1, sdr0_sdstp1);
boot_selection = sdr0_sdstp1 & SDR0_SDSTP1_ERPN_MASK;
ebc_data_width = sdr0_sdstp1 & SDR0_SDSTP1_EBCW_MASK;
@@ -564,277 +562,6 @@ int checkboard (void)
return 0;
}
-static long int yucca_probe_for_dimms(void)
-{
- int dimm_installed[MAXDIMMS];
- int dimm_num, result;
- int dimms_found = 0;
- uchar dimm_addr = IIC0_DIMM0_ADDR;
- uchar dimm_spd_data[MAX_SPD_BYTES];
-
- for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
- /* check if there is a chip at the dimm address */
- switch (dimm_num) {
- case 0:
- dimm_addr = IIC0_DIMM0_ADDR;
- break;
- case 1:
- dimm_addr = IIC0_DIMM1_ADDR;
- break;
- }
-
- result = i2c_probe(dimm_addr);
-
- memset(dimm_spd_data, 0, MAX_SPD_BYTES * sizeof(char));
- if (result == 0) {
- /* read first byte of SPD data, if there is any data */
- result = i2c_read(dimm_addr, 0, 1, dimm_spd_data, 1);
-
- if (result == 0) {
- result = dimm_spd_data[0];
- result = result > MAX_SPD_BYTES ?
- MAX_SPD_BYTES : result;
- result = i2c_read(dimm_addr, 0, 1,
- dimm_spd_data, result);
- }
- }
-
- if ((result == 0) &&
- (dimm_spd_data[64] == MICRON_SPD_JEDEC_ID)) {
- dimm_installed[dimm_num] = TRUE;
- dimms_found++;
- debug("DIMM slot %d: DDR2 SDRAM detected\n", dimm_num);
- } else {
- dimm_installed[dimm_num] = FALSE;
- debug("DIMM slot %d: Not populated or cannot sucessfully probe the DIMM\n", dimm_num);
- }
- }
-
- if (dimms_found == 0) {
- printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
- hang();
- }
-
- if (dimm_installed[0] != TRUE) {
- printf("\nERROR - DIMM slot 0 must be populated before DIMM slot 1.\n");
- printf(" Unsupported configuration. Move DIMM module from DIMM slot 1 to slot 0.\n\n");
- hang();
- }
-
- return dimms_found;
-}
-
-/*************************************************************************
- * init SDRAM controller with fixed value
- * the initialization values are for 2x MICRON DDR2
- * PN: MT18HTF6472DY-53EB2
- * 512MB, DDR2, 533, CL4, ECC, REG
- ************************************************************************/
-static long int fixed_sdram(void)
-{
- long int yucca_dimms = 0;
-
- yucca_dimms = yucca_probe_for_dimms();
-
- /* SDRAM0_MCOPT2 (0X21) Clear DCEN BIT */
- mtdcr( 0x10, 0x00000021 );
- mtdcr( 0x11, 0x84000000 );
-
- /* SDRAM0_MCOPT1 (0X20) ECC OFF / 64 bits / 4 banks / DDR2 */
- mtdcr( 0x10, 0x00000020 );
- mtdcr( 0x11, 0x2D122000 );
-
- /* SET MCIF0_CODT Die Termination On */
- mtdcr( 0x10, 0x00000026 );
- if (yucca_dimms == 2)
- mtdcr( 0x11, 0x2A800021 );
- else if (yucca_dimms == 1)
- mtdcr( 0x11, 0x02800021 );
-
- /* On-Die Termination for Bank 0 */
- mtdcr( 0x10, 0x00000022 );
- if (yucca_dimms == 2)
- mtdcr( 0x11, 0x18000000 );
- else if (yucca_dimms == 1)
- mtdcr( 0x11, 0x06000000 );
-
- /* On-Die Termination for Bank 1 */
- mtdcr( 0x10, 0x00000023 );
- if (yucca_dimms == 2)
- mtdcr( 0x11, 0x18000000 );
- else if (yucca_dimms == 1)
- mtdcr( 0x11, 0x01800000 );
-
- /* On-Die Termination for Bank 2 */
- mtdcr( 0x10, 0x00000024 );
- if (yucca_dimms == 2)
- mtdcr( 0x11, 0x01800000 );
- else if (yucca_dimms == 1)
- mtdcr( 0x11, 0x00000000 );
-
- /* On-Die Termination for Bank 3 */
- mtdcr( 0x10, 0x00000025 );
- if (yucca_dimms == 2)
- mtdcr( 0x11, 0x01800000 );
- else if (yucca_dimms == 1)
- mtdcr( 0x11, 0x00000000 );
-
- /* Refresh Time register (0x30) Refresh every 7.8125uS */
- mtdcr( 0x10, 0x00000030 );
- mtdcr( 0x11, 0x08200000 );
-
- /* SET MCIF0_MMODE CL 4 */
- mtdcr( 0x10, 0x00000088 );
- mtdcr( 0x11, 0x00000642 );
-
- /* MCIF0_MEMODE */
- mtdcr( 0x10, 0x00000089 );
- mtdcr( 0x11, 0x00000004 );
-
- /*SET MCIF0_MB0CF */
- mtdcr( 0x10, 0x00000040 );
- mtdcr( 0x11, 0x00000201 );
-
- /* SET MCIF0_MB1CF */
- mtdcr( 0x10, 0x00000044 );
- mtdcr( 0x11, 0x00000201 );
-
- /* SET MCIF0_MB2CF */
- mtdcr( 0x10, 0x00000048 );
- if (yucca_dimms == 2)
- mtdcr( 0x11, 0x00000201 );
- else if (yucca_dimms == 1)
- mtdcr( 0x11, 0x00000000 );
-
- /* SET MCIF0_MB3CF */
- mtdcr( 0x10, 0x0000004c );
- if (yucca_dimms == 2)
- mtdcr( 0x11, 0x00000201 );
- else if (yucca_dimms == 1)
- mtdcr( 0x11, 0x00000000 );
-
- /* SET MCIF0_INITPLR0 # NOP */
- mtdcr( 0x10, 0x00000050 );
- mtdcr( 0x11, 0xB5380000 );
-
- /* SET MCIF0_INITPLR1 # PRE */
- mtdcr( 0x10, 0x00000051 );
- mtdcr( 0x11, 0x82100400 );
-
- /* SET MCIF0_INITPLR2 # EMR2 */
- mtdcr( 0x10, 0x00000052 );
- mtdcr( 0x11, 0x80820000 );
-
- /* SET MCIF0_INITPLR3 # EMR3 */
- mtdcr( 0x10, 0x00000053 );
- mtdcr( 0x11, 0x80830000 );
-
- /* SET MCIF0_INITPLR4 # EMR DLL ENABLE */
- mtdcr( 0x10, 0x00000054 );
- mtdcr( 0x11, 0x80810000 );
-
- /* SET MCIF0_INITPLR5 # MR DLL RESET */
- mtdcr( 0x10, 0x00000055 );
- mtdcr( 0x11, 0x80800542 );
-
- /* SET MCIF0_INITPLR6 # PRE */
- mtdcr( 0x10, 0x00000056 );
- mtdcr( 0x11, 0x82100400 );
-
- /* SET MCIF0_INITPLR7 # Refresh */
- mtdcr( 0x10, 0x00000057 );
- mtdcr( 0x11, 0x8A080000 );
-
- /* SET MCIF0_INITPLR8 # Refresh */
- mtdcr( 0x10, 0x00000058 );
- mtdcr( 0x11, 0x8A080000 );
-
- /* SET MCIF0_INITPLR9 # Refresh */
- mtdcr( 0x10, 0x00000059 );
- mtdcr( 0x11, 0x8A080000 );
-
- /* SET MCIF0_INITPLR10 # Refresh */
- mtdcr( 0x10, 0x0000005A );
- mtdcr( 0x11, 0x8A080000 );
-
- /* SET MCIF0_INITPLR11 # MR */
- mtdcr( 0x10, 0x0000005B );
- mtdcr( 0x11, 0x80800442 );
-
- /* SET MCIF0_INITPLR12 # EMR OCD Default*/
- mtdcr( 0x10, 0x0000005C );
- mtdcr( 0x11, 0x80810380 );
-
- /* SET MCIF0_INITPLR13 # EMR OCD Exit */
- mtdcr( 0x10, 0x0000005D );
- mtdcr( 0x11, 0x80810000 );
-
- /* 0x80: Adv Addr clock by 180 deg */
- mtdcr( 0x10, 0x00000080 );
- mtdcr( 0x11, 0x80000000 );
-
- /* 0x21: Exit self refresh, set DC_EN */
- mtdcr( 0x10, 0x00000021 );
- mtdcr( 0x11, 0x28000000 );
-
- /* 0x81: Write DQS Adv 90 + Fractional DQS Delay */
- mtdcr( 0x10, 0x00000081 );
- mtdcr( 0x11, 0x80000800 );
-
- /* MCIF0_SDTR1 */
- mtdcr( 0x10, 0x00000085 );
- mtdcr( 0x11, 0x80201000 );
-
- /* MCIF0_SDTR2 */
- mtdcr( 0x10, 0x00000086 );
- mtdcr( 0x11, 0x42103242 );
-
- /* MCIF0_SDTR3 */
- mtdcr( 0x10, 0x00000087 );
- mtdcr( 0x11, 0x0C100D14 );
-
- /* SET MQ0_B0BAS base addr 00000000 / 256MB */
- mtdcr( 0x40, 0x0000F800 );
-
- /* SET MQ0_B1BAS base addr 10000000 / 256MB */
- mtdcr( 0x41, 0x0400F800 );
-
- /* SET MQ0_B2BAS base addr 20000000 / 256MB */
- if (yucca_dimms == 2)
- mtdcr( 0x42, 0x0800F800 );
- else if (yucca_dimms == 1)
- mtdcr( 0x42, 0x00000000 );
-
- /* SET MQ0_B3BAS base addr 30000000 / 256MB */
- if (yucca_dimms == 2)
- mtdcr( 0x43, 0x0C00F800 );
- else if (yucca_dimms == 1)
- mtdcr( 0x43, 0x00000000 );
-
- /* SDRAM_RQDC */
- mtdcr( 0x10, 0x00000070 );
- mtdcr( 0x11, 0x8000003F );
-
- /* SDRAM_RDCC */
- mtdcr( 0x10, 0x00000078 );
- mtdcr( 0x11, 0x80000000 );
-
- /* SDRAM_RFDC */
- mtdcr( 0x10, 0x00000074 );
- mtdcr( 0x11, 0x00000220 );
-
- return (yucca_dimms * 512) << 20;
-}
-
-long int initdram (int board_type)
-{
- long dram_size = 0;
-
- dram_size = fixed_sdram();
-
- return dram_size;
-}
-
#if defined(CFG_DRAM_TEST)
int testdram (void)
{
@@ -1267,42 +994,3 @@ int onboard_pci_arbiter_selected(int core_pci)
#endif
return (BOARD_OPTION_NOT_SELECTED);
}
-
-/*---------------------------------------------------------------------------+
- | ppcMfcpr.
- +---------------------------------------------------------------------------*/
-unsigned long ppcMfcpr(unsigned long cpr_reg)
-{
- unsigned long msr;
- unsigned long cpr_cfgaddr_temp;
- unsigned long cpr_value;
-
- msr = (mfmsr () & ~(MSR_EE));
- cpr_cfgaddr_temp = mfdcr(CPR0_CFGADDR);
- mtdcr(CPR0_CFGADDR, cpr_reg);
- cpr_value = mfdcr(CPR0_CFGDATA);
- mtdcr(CPR0_CFGADDR, cpr_cfgaddr_temp);
- mtmsr(msr);
-
- return (cpr_value);
-}
-
-/*----------------------------------------------------------------------------+
-| Indirect Access of the System DCR's (SDR)
-| ppcMfsdr
-+----------------------------------------------------------------------------*/
-unsigned long ppcMfsdr(unsigned long sdr_reg)
-{
- unsigned long msr;
- unsigned long sdr_cfgaddr_temp;
- unsigned long sdr_value;
-
- msr = (mfmsr () & ~(MSR_EE));
- sdr_cfgaddr_temp = mfdcr(SDR0_CFGADDR);
- mtdcr(SDR0_CFGADDR, sdr_reg);
- sdr_value = mfdcr(SDR0_CFGDATA);
- mtdcr(SDR0_CFGADDR, sdr_cfgaddr_temp);
- mtmsr(msr);
-
- return (sdr_value);
-}
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index 6417ed8..eb4859c 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -45,11 +45,11 @@
#define EXTCLK_50 50000000
#define EXTCLK_83 83333333
-#define CONFIG_IBM_EMAC4_V4 1
-#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
+#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
+#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */
#undef CONFIG_SHOW_BOOT_PROGRESS
#undef CONFIG_STRESS
-#undef ENABLE_ECC
+
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
@@ -118,10 +118,9 @@
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
-#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */
-#define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses */
-#define IIC0_DIMM0_ADDR 0x53
-#define IIC0_DIMM1_ADDR 0x52
+#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
+#define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses*/
+#undef CONFIG_DDR_ECC /* no ECC support for now */
/*-----------------------------------------------------------------------
* I2C
@@ -211,6 +210,7 @@
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
+#define CONFIG_IBM_EMAC4_V4 1
#define CONFIG_MII 1 /* MII PHY management */
#undef CONFIG_NET_MULTI
#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
generated by cgit v1.1 at 2024-11-16 11:12:14 +0000