summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Makefile1
-rw-r--r--common/Makefile3
-rw-r--r--common/cmd_nvedit.c9
-rw-r--r--common/cmd_onenand.c155
-rw-r--r--common/env_onenand.c134
-rw-r--r--drivers/onenand/Makefile44
-rw-r--r--drivers/onenand/onenand_base.c1294
-rw-r--r--drivers/onenand/onenand_bbt.c265
-rw-r--r--include/config_cmd_all.h1
-rw-r--r--include/linux/mtd/bbm.h127
-rw-r--r--include/linux/mtd/onenand.h143
-rw-r--r--include/linux/mtd/onenand_regs.h181
-rw-r--r--include/onenand_uboot.h39
-rw-r--r--lib_arm/board.c8
14 files changed, 2400 insertions, 4 deletions
diff --git a/Makefile b/Makefile
index 8d500f5..5fe67fc 100644
--- a/Makefile
+++ b/Makefile
@@ -211,6 +211,7 @@ LIBS += drivers/libdrivers.a
LIBS += drivers/bios_emulator/libatibiosemu.a
LIBS += drivers/nand/libnand.a
LIBS += drivers/nand_legacy/libnand_legacy.a
+LIBS += drivers/onenand/libonenand.a
LIBS += drivers/net/libnet.a
ifeq ($(CPU),mpc83xx)
LIBS += drivers/qe/qe.a
diff --git a/common/Makefile b/common/Makefile
index ef7d097..fde5ad9 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -37,13 +37,14 @@ COBJS = main.o ACEX1K.o altera.o bedbug.o circbuf.o cmd_autoscript.o \
cmd_load.o cmd_log.o \
cmd_mem.o cmd_mii.o cmd_misc.o cmd_mmc.o \
cmd_nand.o cmd_net.o cmd_nvedit.o \
+ cmd_onenand.o \
cmd_pci.o cmd_pcmcia.o cmd_portio.o \
cmd_reginfo.o cmd_reiser.o cmd_sata.o cmd_scsi.o cmd_spi.o \
cmd_universe.o cmd_usb.o cmd_vfd.o \
command.o console.o cyclon2.o devices.o dlmalloc.o docecc.o \
environment.o env_common.o \
env_nand.o env_dataflash.o env_flash.o env_eeprom.o \
- env_nvram.o env_nowhere.o \
+ env_onenand.o env_nvram.o env_nowhere.o \
exports.o \
fdt_support.o flash.o fpga.o ft_build.o \
hush.o kgdb.o lcd.o lists.o lynxkdi.o \
diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c
index 1db0fc3..6770408 100644
--- a/common/cmd_nvedit.c
+++ b/common/cmd_nvedit.c
@@ -57,8 +57,9 @@ DECLARE_GLOBAL_DATA_PTR;
!defined(CFG_ENV_IS_IN_FLASH) && \
!defined(CFG_ENV_IS_IN_DATAFLASH) && \
!defined(CFG_ENV_IS_IN_NAND) && \
+ !defined(CFG_ENV_IS_IN_ONENAND) && \
!defined(CFG_ENV_IS_NOWHERE)
-# error Define one of CFG_ENV_IS_IN_{NVRAM|EEPROM|FLASH|DATAFLASH|NOWHERE}
+# error Define one of CFG_ENV_IS_IN_{NVRAM|EEPROM|FLASH|DATAFLASH|ONENAND|NOWHERE}
#endif
#define XMK_STR(x) #x
@@ -553,7 +554,8 @@ int getenv_r (char *name, char *buf, unsigned len)
#if defined(CFG_ENV_IS_IN_NVRAM) || defined(CFG_ENV_IS_IN_EEPROM) \
|| (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_FLASH)) \
- || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_NAND))
+ || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_NAND)) \
+ || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_ONENAND))
int do_saveenv (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
extern char * env_name_spec;
@@ -608,7 +610,8 @@ U_BOOT_CMD(
#if defined(CFG_ENV_IS_IN_NVRAM) || defined(CFG_ENV_IS_IN_EEPROM) \
|| (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_FLASH)) \
- || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_NAND))
+ || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_NAND)) \
+ || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_ONENAND))
U_BOOT_CMD(
saveenv, 1, 0, do_saveenv,
"saveenv - save environment variables to persistent storage\n",
diff --git a/common/cmd_onenand.c b/common/cmd_onenand.c
new file mode 100644
index 0000000..dcda099
--- /dev/null
+++ b/common/cmd_onenand.c
@@ -0,0 +1,155 @@
+/*
+ * U-Boot command for OneNAND support
+ *
+ * Copyright (C) 2005-2007 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <command.h>
+
+#ifdef CONFIG_CMD_ONENAND
+
+#include <linux/mtd/compat.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+
+#include <asm/io.h>
+
+extern struct mtd_info onenand_mtd;
+extern struct onenand_chip onenand_chip;
+
+int do_onenand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ int ret = 0;
+
+ switch (argc) {
+ case 0:
+ case 1:
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+
+ case 2:
+ if (strncmp(argv[1], "open", 4) == 0) {
+ onenand_init();
+ return 0;
+ }
+ onenand_print_device_info(onenand_chip.device_id, 1);
+ return 0;
+
+ default:
+ /* At least 4 args */
+ if (strncmp(argv[1], "erase", 5) == 0) {
+ struct erase_info instr;
+ ulong start, end;
+ ulong block;
+
+ start = simple_strtoul(argv[2], NULL, 10);
+ end = simple_strtoul(argv[3], NULL, 10);
+ start -= (unsigned long)onenand_chip.base;
+ end -= (unsigned long)onenand_chip.base;
+
+ if (!end || end < 0)
+ end = start;
+
+ printf("Erase block from %d to %d\n", start, end);
+
+ for (block = start; block <= end; block++) {
+ instr.addr = block << onenand_chip.erase_shift;
+ instr.len = 1 << onenand_chip.erase_shift;
+ ret = onenand_erase(&onenand_mtd, &instr);
+ if (ret) {
+ printf("erase failed %d\n", block);
+ break;
+ }
+ }
+
+ return 0;
+ }
+
+ if (strncmp(argv[1], "read", 4) == 0) {
+ ulong addr = simple_strtoul(argv[2], NULL, 16);
+ ulong ofs = simple_strtoul(argv[3], NULL, 16);
+ size_t len = simple_strtoul(argv[4], NULL, 16);
+ size_t retlen = 0;
+ int oob = strncmp(argv[1], "read.oob", 8) ? 0 : 1;
+
+ ofs -= (unsigned long)onenand_chip.base;
+
+ if (oob)
+ onenand_read_oob(&onenand_mtd, ofs, len,
+ &retlen, (u_char *) addr);
+ else
+ onenand_read(&onenand_mtd, ofs, len, &retlen,
+ (u_char *) addr);
+ printf("Done\n");
+
+ return 0;
+ }
+
+ if (strncmp(argv[1], "write", 5) == 0) {
+ ulong addr = simple_strtoul(argv[2], NULL, 16);
+ ulong ofs = simple_strtoul(argv[3], NULL, 16);
+ size_t len = simple_strtoul(argv[4], NULL, 16);
+ size_t retlen = 0;
+
+ ofs -= (unsigned long)onenand_chip.base;
+
+ onenand_write(&onenand_mtd, ofs, len, &retlen,
+ (u_char *) addr);
+ printf("Done\n");
+
+ return 0;
+ }
+
+ if (strncmp(argv[1], "block", 5) == 0) {
+ ulong addr = simple_strtoul(argv[2], NULL, 16);
+ ulong block = simple_strtoul(argv[3], NULL, 10);
+ ulong page = simple_strtoul(argv[4], NULL, 10);
+ size_t len = simple_strtol(argv[5], NULL, 10);
+ size_t retlen = 0;
+ ulong ofs;
+ int oob = strncmp(argv[1], "block.oob", 9) ? 0 : 1;
+
+ ofs = block << onenand_chip.erase_shift;
+ if (page)
+ ofs += page << onenand_chip.page_shift;
+
+ if (!len) {
+ if (oob)
+ len = 64;
+ else
+ len = 512;
+ }
+
+ if (oob)
+ onenand_read_oob(&onenand_mtd, ofs, len,
+ &retlen, (u_char *) addr);
+ else
+ onenand_read(&onenand_mtd, ofs, len, &retlen,
+ (u_char *) addr);
+ return 0;
+ }
+
+ break;
+ }
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ onenand, 6, 1, do_onenand,
+ "onenand - OneNAND sub-system\n",
+ "info - show available OneNAND devices\n"
+ "onenand read[.oob] addr ofs len - read data at ofs with len to addr\n"
+ "onenand write addr ofs len - write data at ofs with len from addr\n"
+ "onenand erase saddr eaddr - erase block start addr to end addr\n"
+ "onenand block[.oob] addr block [page] [len] - "
+ "read data with (block [, page]) to addr"
+);
+
+#endif /* CONFIG_CMD_ONENAND */
diff --git a/common/env_onenand.c b/common/env_onenand.c
new file mode 100644
index 0000000..66107f9
--- /dev/null
+++ b/common/env_onenand.c
@@ -0,0 +1,134 @@
+/*
+ * (C) Copyright 2005-2007 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CFG_ENV_IS_IN_ONENAND) /* Environment is in OneNAND */
+
+#include <command.h>
+#include <environment.h>
+#include <linux/stddef.h>
+#include <malloc.h>
+
+#include <linux/mtd/compat.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+
+extern struct mtd_info onenand_mtd;
+extern struct onenand_chip onenand_chip;
+
+/* References to names in env_common.c */
+extern uchar default_environment[];
+
+#define ONENAND_ENV_SIZE(mtd) (mtd.oobblock - ENV_HEADER_SIZE)
+
+char *env_name_spec = "OneNAND";
+
+#ifdef ENV_IS_EMBEDDED
+extern uchar environment[];
+env_t *env_ptr = (env_t *) (&environment[0]);
+#else /* ! ENV_IS_EMBEDDED */
+static unsigned char onenand_env[MAX_ONENAND_PAGESIZE];
+env_t *env_ptr = (env_t *) onenand_env;
+#endif /* ENV_IS_EMBEDDED */
+
+uchar env_get_char_spec(int index)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ return (*((uchar *) (gd->env_addr + index)));
+}
+
+void env_relocate_spec(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ unsigned long env_addr;
+ int use_default = 0;
+ int retlen;
+
+ env_addr = CFG_ENV_ADDR;
+ env_addr -= (unsigned long)onenand_chip.base;
+
+ /* Check OneNAND exist */
+ if (onenand_mtd.oobblock)
+ /* Ignore read fail */
+ onenand_read(&onenand_mtd, env_addr, onenand_mtd.oobblock,
+ &retlen, (u_char *) env_ptr);
+ else
+ onenand_mtd.oobblock = MAX_ONENAND_PAGESIZE;
+
+ if (crc32(0, env_ptr->data, ONENAND_ENV_SIZE(onenand_mtd)) !=
+ env_ptr->crc)
+ use_default = 1;
+
+ if (use_default) {
+ memcpy(env_ptr->data, default_environment,
+ ONENAND_ENV_SIZE(onenand_mtd));
+ env_ptr->crc =
+ crc32(0, env_ptr->data, ONENAND_ENV_SIZE(onenand_mtd));
+ }
+
+ gd->env_addr = (ulong) & env_ptr->data;
+ gd->env_valid = 1;
+}
+
+int saveenv(void)
+{
+ unsigned long env_addr = CFG_ENV_ADDR;
+ struct erase_info instr;
+ int retlen;
+
+ instr.len = CFG_ENV_SIZE;
+ instr.addr = env_addr;
+ instr.addr -= (unsigned long)onenand_chip.base;
+ if (onenand_erase(&onenand_mtd, &instr)) {
+ printf("OneNAND: erase failed at 0x%08x\n", env_addr);
+ return 1;
+ }
+
+ /* update crc */
+ env_ptr->crc =
+ crc32(0, env_ptr->data, onenand_mtd.oobblock - ENV_HEADER_SIZE);
+
+ env_addr -= (unsigned long)onenand_chip.base;
+ if (onenand_write(&onenand_mtd, env_addr, onenand_mtd.oobblock, &retlen,
+ (u_char *) env_ptr)) {
+ printf("OneNAND: write failed at 0x%08x\n", instr.addr);
+ return 2;
+ }
+
+ return 0;
+}
+
+int env_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /* use default */
+ gd->env_addr = (ulong) & default_environment[0];
+ gd->env_valid = 1;
+
+ return 0;
+}
+
+#endif /* CFG_ENV_IS_IN_ONENAND */
diff --git a/drivers/onenand/Makefile b/drivers/onenand/Makefile
new file mode 100644
index 0000000..2049413
--- /dev/null
+++ b/drivers/onenand/Makefile
@@ -0,0 +1,44 @@
+#
+# Copyright (C) 2005-2007 Samsung Electronics.
+# Kyungmin Park <kyungmin.park@samsung.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB := $(obj)libonenand.a
+
+COBJS := onenand_base.o onenand_bbt.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/onenand/onenand_base.c b/drivers/onenand/onenand_base.c
new file mode 100644
index 0000000..7983a4a
--- /dev/null
+++ b/drivers/onenand/onenand_base.c
@@ -0,0 +1,1294 @@
+/*
+ * linux/drivers/mtd/onenand/onenand_base.c
+ *
+ * Copyright (C) 2005-2007 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_CMD_ONENAND
+
+#include <linux/mtd/compat.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+
+#include <asm/io.h>
+#include <asm/errno.h>
+
+static const unsigned char ffchars[] = {
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 16 */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 32 */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 48 */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 64 */
+};
+
+/**
+ * onenand_readw - [OneNAND Interface] Read OneNAND register
+ * @param addr address to read
+ *
+ * Read OneNAND register
+ */
+static unsigned short onenand_readw(void __iomem * addr)
+{
+ return readw(addr);
+}
+
+/**
+ * onenand_writew - [OneNAND Interface] Write OneNAND register with value
+ * @param value value to write
+ * @param addr address to write
+ *
+ * Write OneNAND register with value
+ */
+static void onenand_writew(unsigned short value, void __iomem * addr)
+{
+ writew(value, addr);
+}
+
+/**
+ * onenand_block_address - [DEFAULT] Get block address
+ * @param device the device id
+ * @param block the block
+ * @return translated block address if DDP, otherwise same
+ *
+ * Setup Start Address 1 Register (F100h)
+ */
+static int onenand_block_address(int device, int block)
+{
+ if (device & ONENAND_DEVICE_IS_DDP) {
+ /* Device Flash Core select, NAND Flash Block Address */
+ int dfs = 0, density, mask;
+
+ density = device >> ONENAND_DEVICE_DENSITY_SHIFT;
+ mask = (1 << (density + 6));
+
+ if (block & mask)
+ dfs = 1;
+
+ return (dfs << ONENAND_DDP_SHIFT) | (block & (mask - 1));
+ }
+
+ return block;
+}
+
+/**
+ * onenand_bufferram_address - [DEFAULT] Get bufferram address
+ * @param device the device id
+ * @param block the block
+ * @return set DBS value if DDP, otherwise 0
+ *
+ * Setup Start Address 2 Register (F101h) for DDP
+ */
+static int onenand_bufferram_address(int device, int block)
+{
+ if (device & ONENAND_DEVICE_IS_DDP) {
+ /* Device BufferRAM Select */
+ int dbs = 0, density, mask;
+
+ density = device >> ONENAND_DEVICE_DENSITY_SHIFT;
+ mask = (1 << (density + 6));
+
+ if (block & mask)
+ dbs = 1;
+
+ return (dbs << ONENAND_DDP_SHIFT);
+ }
+
+ return 0;
+}
+
+/**
+ * onenand_page_address - [DEFAULT] Get page address
+ * @param page the page address
+ * @param sector the sector address
+ * @return combined page and sector address
+ *
+ * Setup Start Address 8 Register (F107h)
+ */
+static int onenand_page_address(int page, int sector)
+{
+ /* Flash Page Address, Flash Sector Address */
+ int fpa, fsa;
+
+ fpa = page & ONENAND_FPA_MASK;
+ fsa = sector & ONENAND_FSA_MASK;
+
+ return ((fpa << ONENAND_FPA_SHIFT) | fsa);
+}
+
+/**
+ * onenand_buffer_address - [DEFAULT] Get buffer address
+ * @param dataram1 DataRAM index
+ * @param sectors the sector address
+ * @param count the number of sectors
+ * @return the start buffer value
+ *
+ * Setup Start Buffer Register (F200h)
+ */
+static int onenand_buffer_address(int dataram1, int sectors, int count)
+{
+ int bsa, bsc;
+
+ /* BufferRAM Sector Address */
+ bsa = sectors & ONENAND_BSA_MASK;
+
+ if (dataram1)
+ bsa |= ONENAND_BSA_DATARAM1; /* DataRAM1 */
+ else
+ bsa |= ONENAND_BSA_DATARAM0; /* DataRAM0 */
+
+ /* BufferRAM Sector Count */
+ bsc = count & ONENAND_BSC_MASK;
+
+ return ((bsa << ONENAND_BSA_SHIFT) | bsc);
+}
+
+/**
+ * onenand_command - [DEFAULT] Send command to OneNAND device
+ * @param mtd MTD device structure
+ * @param cmd the command to be sent
+ * @param addr offset to read from or write to
+ * @param len number of bytes to read or write
+ *
+ * Send command to OneNAND device. This function is used for middle/large page
+ * devices (1KB/2KB Bytes per page)
+ */
+static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr,
+ size_t len)
+{
+ struct onenand_chip *this = mtd->priv;
+ int value, readcmd = 0;
+ int block, page;
+ /* Now we use page size operation */
+ int sectors = 4, count = 4;
+
+ /* Address translation */
+ switch (cmd) {
+ case ONENAND_CMD_UNLOCK:
+ case ONENAND_CMD_LOCK:
+ case ONENAND_CMD_LOCK_TIGHT:
+ block = -1;
+ page = -1;
+ break;
+
+ case ONENAND_CMD_ERASE:
+ case ONENAND_CMD_BUFFERRAM:
+ block = (int)(addr >> this->erase_shift);
+ page = -1;
+ break;
+
+ default:
+ block = (int)(addr >> this->erase_shift);
+ page = (int)(addr >> this->page_shift);
+ page &= this->page_mask;
+ break;
+ }
+
+ /* NOTE: The setting order of the registers is very important! */
+ if (cmd == ONENAND_CMD_BUFFERRAM) {
+ /* Select DataRAM for DDP */
+ value = onenand_bufferram_address(this->device_id, block);
+ this->write_word(value,
+ this->base + ONENAND_REG_START_ADDRESS2);
+
+ /* Switch to the next data buffer */
+ ONENAND_SET_NEXT_BUFFERRAM(this);
+
+ return 0;
+ }
+
+ if (block != -1) {
+ /* Write 'DFS, FBA' of Flash */
+ value = onenand_block_address(this->device_id, block);
+ this->write_word(value,
+ this->base + ONENAND_REG_START_ADDRESS1);
+ }
+
+ if (page != -1) {
+ int dataram;
+
+ switch (cmd) {
+ case ONENAND_CMD_READ:
+ case ONENAND_CMD_READOOB:
+ dataram = ONENAND_SET_NEXT_BUFFERRAM(this);
+ readcmd = 1;
+ break;
+
+ default:
+ dataram = ONENAND_CURRENT_BUFFERRAM(this);
+ break;
+ }
+
+ /* Write 'FPA, FSA' of Flash */
+ value = onenand_page_address(page, sectors);
+ this->write_word(value,
+ this->base + ONENAND_REG_START_ADDRESS8);
+
+ /* Write 'BSA, BSC' of DataRAM */
+ value = onenand_buffer_address(dataram, sectors, count);
+ this->write_word(value, this->base + ONENAND_REG_START_BUFFER);
+
+ if (readcmd) {
+ /* Select DataRAM for DDP */
+ value =
+ onenand_bufferram_address(this->device_id, block);
+ this->write_word(value,
+ this->base +
+ ONENAND_REG_START_ADDRESS2);
+ }
+ }
+
+ /* Interrupt clear */
+ this->write_word(ONENAND_INT_CLEAR, this->base + ONENAND_REG_INTERRUPT);
+ /* Write command */
+ this->write_word(cmd, this->base + ONENAND_REG_COMMAND);
+
+ return 0;
+}
+
+/**
+ * onenand_wait - [DEFAULT] wait until the command is done
+ * @param mtd MTD device structure
+ * @param state state to select the max. timeout value
+ *
+ * Wait for command done. This applies to all OneNAND command
+ * Read can take up to 30us, erase up to 2ms and program up to 350us
+ * according to general OneNAND specs
+ */
+static int onenand_wait(struct mtd_info *mtd, int state)
+{
+ struct onenand_chip *this = mtd->priv;
+ unsigned int flags = ONENAND_INT_MASTER;
+ unsigned int interrupt = 0;
+ unsigned int ctrl, ecc;
+
+ while (1) {
+ interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
+ if (interrupt & flags)
+ break;
+ }
+
+ ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
+
+ if (ctrl & ONENAND_CTRL_ERROR) {
+ DEBUG(MTD_DEBUG_LEVEL0,
+ "onenand_wait: controller error = 0x%04x\n", ctrl);
+ return -EAGAIN;
+ }
+
+ if (ctrl & ONENAND_CTRL_LOCK) {
+ DEBUG(MTD_DEBUG_LEVEL0,
+ "onenand_wait: it's locked error = 0x%04x\n", ctrl);
+ return -EIO;
+ }
+
+ if (interrupt & ONENAND_INT_READ) {
+ ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
+ if (ecc & ONENAND_ECC_2BIT_ALL) {
+ DEBUG(MTD_DEBUG_LEVEL0,
+ "onenand_wait: ECC error = 0x%04x\n", ecc);
+ return -EBADMSG;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * onenand_bufferram_offset - [DEFAULT] BufferRAM offset
+ * @param mtd MTD data structure
+ * @param area BufferRAM area
+ * @return offset given area
+ *
+ * Return BufferRAM offset given area
+ */
+static inline int onenand_bufferram_offset(struct mtd_info *mtd, int area)
+{
+ struct onenand_chip *this = mtd->priv;
+
+ if (ONENAND_CURRENT_BUFFERRAM(this)) {
+ if (area == ONENAND_DATARAM)
+ return mtd->oobblock;
+ if (area == ONENAND_SPARERAM)
+ return mtd->oobsize;
+ }
+
+ return 0;
+}
+
+/**
+ * onenand_read_bufferram - [OneNAND Interface] Read the bufferram area
+ * @param mtd MTD data structure
+ * @param area BufferRAM area
+ * @param buffer the databuffer to put/get data
+ * @param offset offset to read from or write to
+ * @param count number of bytes to read/write
+ *
+ * Read the BufferRAM area
+ */
+static int onenand_read_bufferram(struct mtd_info *mtd, int area,
+ unsigned char *buffer, int offset,
+ size_t count)
+{
+ struct onenand_chip *this = mtd->priv;
+ void __iomem *bufferram;
+
+ bufferram = this->base + area;
+ bufferram += onenand_bufferram_offset(mtd, area);
+
+ memcpy(buffer, bufferram + offset, count);
+
+ return 0;
+}
+
+/**
+ * onenand_sync_read_bufferram - [OneNAND Interface] Read the bufferram area with Sync. Burst mode
+ * @param mtd MTD data structure
+ * @param area BufferRAM area
+ * @param buffer the databuffer to put/get data
+ * @param offset offset to read from or write to
+ * @param count number of bytes to read/write
+ *
+ * Read the BufferRAM area with Sync. Burst Mode
+ */
+static int onenand_sync_read_bufferram(struct mtd_info *mtd, int area,
+ unsigned char *buffer, int offset,
+ size_t count)
+{
+ struct onenand_chip *this = mtd->priv;
+ void __iomem *bufferram;
+
+ bufferram = this->base + area;
+ bufferram += onenand_bufferram_offset(mtd, area);
+
+ this->mmcontrol(mtd, ONENAND_SYS_CFG1_SYNC_READ);
+
+ memcpy(buffer, bufferram + offset, count);
+
+ this->mmcontrol(mtd, 0);
+
+ return 0;
+}
+
+/**
+ * onenand_write_bufferram - [OneNAND Interface] Write the bufferram area
+ * @param mtd MTD data structure
+ * @param area BufferRAM area
+ * @param buffer the databuffer to put/get data
+ * @param offset offset to read from or write to
+ * @param count number of bytes to read/write
+ *
+ * Write the BufferRAM area
+ */
+static int onenand_write_bufferram(struct mtd_info *mtd, int area,
+ const unsigned char *buffer, int offset,
+ size_t count)
+{
+ struct onenand_chip *this = mtd->priv;
+ void __iomem *bufferram;
+
+ bufferram = this->base + area;
+ bufferram += onenand_bufferram_offset(mtd, area);
+
+ memcpy(bufferram + offset, buffer, count);
+
+ return 0;
+}
+
+/**
+ * onenand_check_bufferram - [GENERIC] Check BufferRAM information
+ * @param mtd MTD data structure
+ * @param addr address to check
+ * @return 1 if there are valid data, otherwise 0
+ *
+ * Check bufferram if there is data we required
+ */
+static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr)
+{
+ struct onenand_chip *this = mtd->priv;
+ int block, page;
+ int i;
+
+ block = (int)(addr >> this->erase_shift);
+ page = (int)(addr >> this->page_shift);
+ page &= this->page_mask;
+
+ i = ONENAND_CURRENT_BUFFERRAM(this);
+
+ /* Is there valid data? */
+ if (this->bufferram[i].block == block &&
+ this->bufferram[i].page == page && this->bufferram[i].valid)
+ return 1;
+
+ return 0;
+}
+
+/**
+ * onenand_update_bufferram - [GENERIC] Update BufferRAM information
+ * @param mtd MTD data structure
+ * @param addr address to update
+ * @param valid valid flag
+ *
+ * Update BufferRAM information
+ */
+static int onenand_update_bufferram(struct mtd_info *mtd, loff_t addr,
+ int valid)
+{
+ struct onenand_chip *this = mtd->priv;
+ int block, page;
+ int i;
+
+ block = (int)(addr >> this->erase_shift);
+ page = (int)(addr >> this->page_shift);
+ page &= this->page_mask;
+
+ /* Invalidate BufferRAM */
+ for (i = 0; i < MAX_BUFFERRAM; i++) {
+ if (this->bufferram[i].block == block &&
+ this->bufferram[i].page == page)
+ this->bufferram[i].valid = 0;
+ }
+
+ /* Update BufferRAM */
+ i = ONENAND_CURRENT_BUFFERRAM(this);
+ this->bufferram[i].block = block;
+ this->bufferram[i].page = page;
+ this->bufferram[i].valid = valid;
+
+ return 0;
+}
+
+/**
+ * onenand_get_device - [GENERIC] Get chip for selected access
+ * @param mtd MTD device structure
+ * @param new_state the state which is requested
+ *
+ * Get the device and lock it for exclusive access
+ */
+static void onenand_get_device(struct mtd_info *mtd, int new_state)
+{
+ /* Do nothing */
+}
+
+/**
+ * onenand_release_device - [GENERIC] release chip
+ * @param mtd MTD device structure
+ *
+ * Deselect, release chip lock and wake up anyone waiting on the device
+ */
+static void onenand_release_device(struct mtd_info *mtd)
+{
+ /* Do nothing */
+}
+
+/**
+ * onenand_read_ecc - [MTD Interface] Read data with ECC
+ * @param mtd MTD device structure
+ * @param from offset to read from
+ * @param len number of bytes to read
+ * @param retlen pointer to variable to store the number of read bytes
+ * @param buf the databuffer to put data
+ * @param oob_buf filesystem supplied oob data buffer
+ * @param oobsel oob selection structure
+ *
+ * OneNAND read with ECC
+ */
+static int onenand_read_ecc(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t * retlen, u_char * buf,
+ u_char * oob_buf, struct nand_oobinfo *oobsel)
+{
+ struct onenand_chip *this = mtd->priv;
+ int read = 0, column;
+ int thislen;
+ int ret = 0;
+
+ DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_ecc: from = 0x%08x, len = %i\n",
+ (unsigned int)from, (int)len);
+
+ /* Do not allow reads past end of device */
+ if ((from + len) > mtd->size) {
+ DEBUG(MTD_DEBUG_LEVEL0,
+ "onenand_read_ecc: Attempt read beyond end of device\n");
+ *retlen = 0;
+ return -EINVAL;
+ }
+
+ /* Grab the lock and see if the device is available */
+ onenand_get_device(mtd, FL_READING);
+
+ while (read < len) {
+ thislen = min_t(int, mtd->oobblock, len - read);
+
+ column = from & (mtd->oobblock - 1);
+ if (column + thislen > mtd->oobblock)
+ thislen = mtd->oobblock - column;
+
+ if (!onenand_check_bufferram(mtd, from)) {
+ this->command(mtd, ONENAND_CMD_READ, from,
+ mtd->oobblock);
+ ret = this->wait(mtd, FL_READING);
+ /* First copy data and check return value for ECC handling */
+ onenand_update_bufferram(mtd, from, 1);
+ }
+
+ this->read_bufferram(mtd, ONENAND_DATARAM, buf, column,
+ thislen);
+
+ read += thislen;
+ if (read == len)
+ break;
+
+ if (ret) {
+ DEBUG(MTD_DEBUG_LEVEL0,
+ "onenand_read_ecc: read failed = %d\n", ret);
+ break;
+ }
+
+ from += thislen;
+ buf += thislen;
+ }
+
+ /* Deselect and wake up anyone waiting on the device */
+ onenand_release_device(mtd);
+
+ /*
+ * Return success, if no ECC failures, else -EBADMSG
+ * fs driver will take care of that, because
+ * retlen == desired len and result == -EBADMSG
+ */
+ *retlen = read;
+ return ret;
+}
+
+/**
+ * onenand_read - [MTD Interface] MTD compability function for onenand_read_ecc
+ * @param mtd MTD device structure
+ * @param from offset to read from
+ * @param len number of bytes to read
+ * @param retlen pointer to variable to store the number of read bytes
+ * @param buf the databuffer to put data
+ *
+ * This function simply calls onenand_read_ecc with oob buffer and oobsel = NULL
+*/
+int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t * retlen, u_char * buf)
+{
+ return onenand_read_ecc(mtd, from, len, retlen, buf, NULL, NULL);
+}
+
+/**
+ * onenand_read_oob - [MTD Interface] OneNAND read out-of-band
+ * @param mtd MTD device structure
+ * @param from offset to read from
+ * @param len number of bytes to read
+ * @param retlen pointer to variable to store the number of read bytes
+ * @param buf the databuffer to put data
+ *
+ * OneNAND read out-of-band data from the spare area
+ */
+int onenand_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t * retlen, u_char * buf)
+{
+ struct onenand_chip *this = mtd->priv;
+ int read = 0, thislen, column;
+ int ret = 0;
+
+ DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_oob: from = 0x%08x, len = %i\n",
+ (unsigned int)from, (int)len);
+
+ /* Initialize return length value */
+ *retlen = 0;
+
+ /* Do not allow reads past end of device */
+ if (unlikely((from + len) > mtd->size)) {
+ DEBUG(MTD_DEBUG_LEVEL0,
+ "onenand_read_oob: Attempt read beyond end of device\n");
+ return -EINVAL;
+ }
+
+ /* Grab the lock and see if the device is available */
+ onenand_get_device(mtd, FL_READING);
+
+ column = from & (mtd->oobsize - 1);
+
+ while (read < len) {
+ thislen = mtd->oobsize - column;
+ thislen = min_t(int, thislen, len);
+
+ this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize);
+
+ onenand_update_bufferram(mtd, from, 0);
+
+ ret = this->wait(mtd, FL_READING);
+ /* First copy data and check return value for ECC handling */
+
+ this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column,
+ thislen);
+
+ read += thislen;
+ if (read == len)
+ break;
+
+ if (ret) {
+ DEBUG(MTD_DEBUG_LEVEL0,
+ "onenand_read_oob: read failed = %d\n", ret);
+ break;
+ }
+
+ buf += thislen;
+ /* Read more? */
+ if (read < len) {
+ /* Page size */
+ from += mtd->oobblock;
+ column = 0;
+ }
+ }
+
+ /* Deselect and wake up anyone waiting on the device */
+ onenand_release_device(mtd);
+
+ *retlen = read;
+ return ret;
+}
+
+#ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
+/**
+ * onenand_verify_page - [GENERIC] verify the chip contents after a write
+ * @param mtd MTD device structure
+ * @param buf the databuffer to verify
+ * @param block block address
+ * @param page page address
+ *
+ * Check DataRAM area directly
+ */
+static int onenand_verify_page(struct mtd_info *mtd, u_char * buf,
+ loff_t addr, int block, int page)
+{
+ struct onenand_chip *this = mtd->priv;
+ void __iomem *dataram0, *dataram1;
+ int ret = 0;
+
+ this->command(mtd, ONENAND_CMD_READ, addr, mtd->oobblock);
+
+ ret = this->wait(mtd, FL_READING);
+ if (ret)
+ return ret;
+
+ onenand_update_bufferram(mtd, addr, 1);
+
+ /* Check, if the two dataram areas are same */
+ dataram0 = this->base + ONENAND_DATARAM;
+ dataram1 = dataram0 + mtd->oobblock;
+
+ if (memcmp(dataram0, dataram1, mtd->oobblock))
+ return -EBADMSG;
+
+ return 0;
+}
+#else
+#define onenand_verify_page(...) (0)
+#endif
+
+#define NOTALIGNED(x) ((x & (mtd->oobblock - 1)) != 0)
+
+/**
+ * onenand_write_ecc - [MTD Interface] OneNAND write with ECC
+ * @param mtd MTD device structure
+ * @param to offset to write to
+ * @param len number of bytes to write
+ * @param retlen pointer to variable to store the number of written bytes
+ * @param buf the data to write
+ * @param eccbuf filesystem supplied oob data buffer
+ * @param oobsel oob selection structure
+ *
+ * OneNAND write with ECC
+ */
+static int onenand_write_ecc(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t * retlen, const u_char * buf,
+ u_char * eccbuf, struct nand_oobinfo *oobsel)
+{
+ struct onenand_chip *this = mtd->priv;
+ int written = 0;
+ int ret = 0;
+
+ DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_ecc: to = 0x%08x, len = %i\n",
+ (unsigned int)to, (int)len);
+
+ /* Initialize retlen, in case of early exit */
+ *retlen = 0;
+
+ /* Do not allow writes past end of device */
+ if (unlikely((to + len) > mtd->size)) {
+ DEBUG(MTD_DEBUG_LEVEL0,
+ "onenand_write_ecc: Attempt write to past end of device\n");
+ return -EINVAL;
+ }
+
+ /* Reject writes, which are not page aligned */
+ if (unlikely(NOTALIGNED(to)) || unlikely(NOTALIGNED(len))) {
+ DEBUG(MTD_DEBUG_LEVEL0,
+ "onenand_write_ecc: Attempt to write not page aligned data\n");
+ return -EINVAL;
+ }
+
+ /* Grab the lock and see if the device is available */
+ onenand_get_device(mtd, FL_WRITING);
+
+ /* Loop until all data write */
+ while (written < len) {
+ int thislen = min_t(int, mtd->oobblock, len - written);
+
+ this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobblock);
+
+ this->write_bufferram(mtd, ONENAND_DATARAM, buf, 0, thislen);
+ this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0,
+ mtd->oobsize);
+
+ this->command(mtd, ONENAND_CMD_PROG, to, mtd->oobblock);
+
+ onenand_update_bufferram(mtd, to, 1);
+
+ ret = this->wait(mtd, FL_WRITING);
+ if (ret) {
+ DEBUG(MTD_DEBUG_LEVEL0,
+ "onenand_write_ecc: write filaed %d\n", ret);
+ break;
+ }
+
+ written += thislen;
+
+ /* Only check verify write turn on */
+ ret = onenand_verify_page(mtd, (u_char *) buf, to, block, page);
+ if (ret) {
+ DEBUG(MTD_DEBUG_LEVEL0,
+ "onenand_write_ecc: verify failed %d\n", ret);
+ break;
+ }
+
+ if (written == len)
+ break;
+
+ to += thislen;
+ buf += thislen;
+ }
+
+ /* Deselect and wake up anyone waiting on the device */
+ onenand_release_device(mtd);
+
+ *retlen = written;
+
+ return ret;
+}
+
+/**
+ * onenand_write - [MTD Interface] compability function for onenand_write_ecc
+ * @param mtd MTD device structure
+ * @param to offset to write to
+ * @param len number of bytes to write
+ * @param retlen pointer to variable to store the number of written bytes
+ * @param buf the data to write
+ *
+ * This function simply calls onenand_write_ecc
+ * with oob buffer and oobsel = NULL
+ */
+int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t * retlen, const u_char * buf)
+{
+ return onenand_write_ecc(mtd, to, len, retlen, buf, NULL, NULL);
+}
+
+/**
+ * onenand_write_oob - [MTD Interface] OneNAND write out-of-band
+ * @param mtd MTD device structure
+ * @param to offset to write to
+ * @param len number of bytes to write
+ * @param retlen pointer to variable to store the number of written bytes
+ * @param buf the data to write
+ *
+ * OneNAND write out-of-band
+ */
+int onenand_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t * retlen, const u_char * buf)
+{
+ struct onenand_chip *this = mtd->priv;
+ int column, status;
+ int written = 0;
+
+ DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_oob: to = 0x%08x, len = %i\n",
+ (unsigned int)to, (int)len);
+
+ /* Initialize retlen, in case of early exit */
+ *retlen = 0;
+
+ /* Do not allow writes past end of device */
+ if (unlikely((to + len) > mtd->size)) {
+ DEBUG(MTD_DEBUG_LEVEL0,
+ "onenand_write_oob: Attempt write to past end of device\n");
+ return -EINVAL;
+ }
+
+ /* Grab the lock and see if the device is available */
+ onenand_get_device(mtd, FL_WRITING);
+
+ /* Loop until all data write */
+ while (written < len) {
+ int thislen = min_t(int, mtd->oobsize, len - written);
+
+ column = to & (mtd->oobsize - 1);
+
+ this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobsize);
+
+ this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0,
+ mtd->oobsize);
+ this->write_bufferram(mtd, ONENAND_SPARERAM, buf, column,
+ thislen);
+
+ this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
+
+ onenand_update_bufferram(mtd, to, 0);
+
+ status = this->wait(mtd, FL_WRITING);
+ if (status)
+ break;
+
+ written += thislen;
+ if (written == len)
+ break;
+
+ to += thislen;
+ buf += thislen;
+ }
+
+ /* Deselect and wake up anyone waiting on the device */
+ onenand_release_device(mtd);
+
+ *retlen = written;
+
+ return 0;
+}
+
+/**
+ * onenand_erase - [MTD Interface] erase block(s)
+ * @param mtd MTD device structure
+ * @param instr erase instruction
+ *
+ * Erase one ore more blocks
+ */
+int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+ struct onenand_chip *this = mtd->priv;
+ unsigned int block_size;
+ loff_t addr;
+ int len;
+ int ret = 0;
+
+ DEBUG(MTD_DEBUG_LEVEL3, "onenand_erase: start = 0x%08x, len = %i\n",
+ (unsigned int)instr->addr, (unsigned int)instr->len);
+
+ block_size = (1 << this->erase_shift);
+
+ /* Start address must align on block boundary */
+ if (unlikely(instr->addr & (block_size - 1))) {
+ DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Unaligned address\n");
+ return -EINVAL;
+ }
+
+ /* Length must align on block boundary */
+ if (unlikely(instr->len & (block_size - 1))) {
+ DEBUG(MTD_DEBUG_LEVEL0,
+ "onenand_erase: Length not block aligned\n");
+ return -EINVAL;
+ }
+
+ /* Do not allow erase past end of device */
+ if (unlikely((instr->len + instr->addr) > mtd->size)) {
+ DEBUG(MTD_DEBUG_LEVEL0,
+ "onenand_erase: Erase past end of device\n");
+ return -EINVAL;
+ }
+
+ instr->fail_addr = 0xffffffff;
+
+ /* Grab the lock and see if the device is available */
+ onenand_get_device(mtd, FL_ERASING);
+
+ /* Loop throught the pages */
+ len = instr->len;
+ addr = instr->addr;
+
+ instr->state = MTD_ERASING;
+
+ while (len) {
+
+ /* TODO Check badblock */
+
+ this->command(mtd, ONENAND_CMD_ERASE, addr, block_size);
+
+ ret = this->wait(mtd, FL_ERASING);
+ /* Check, if it is write protected */
+ if (ret) {
+ if (ret == -EPERM)
+ DEBUG(MTD_DEBUG_LEVEL0,
+ "onenand_erase: Device is write protected!!!\n");
+ else
+ DEBUG(MTD_DEBUG_LEVEL0,
+ "onenand_erase: Failed erase, block %d\n",
+ (unsigned)(addr >> this->erase_shift));
+ instr->state = MTD_ERASE_FAILED;
+ instr->fail_addr = addr;
+ goto erase_exit;
+ }
+
+ len -= block_size;
+ addr += block_size;
+ }
+
+ instr->state = MTD_ERASE_DONE;
+
+ erase_exit:
+
+ ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;
+ /* Do call back function */
+ if (!ret)
+ mtd_erase_callback(instr);
+
+ /* Deselect and wake up anyone waiting on the device */
+ onenand_release_device(mtd);
+
+ return ret;
+}
+
+/**
+ * onenand_sync - [MTD Interface] sync
+ * @param mtd MTD device structure
+ *
+ * Sync is actually a wait for chip ready function
+ */
+void onenand_sync(struct mtd_info *mtd)
+{
+ DEBUG(MTD_DEBUG_LEVEL3, "onenand_sync: called\n");
+
+ /* Grab the lock and see if the device is available */
+ onenand_get_device(mtd, FL_SYNCING);
+
+ /* Release it and go back */
+ onenand_release_device(mtd);
+}
+
+/**
+ * onenand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
+ * @param mtd MTD device structure
+ * @param ofs offset relative to mtd start
+ */
+int onenand_block_isbad(struct mtd_info *mtd, loff_t ofs)
+{
+ /*
+ * TODO
+ * 1. Bad block table (BBT)
+ * -> using NAND BBT to support JFFS2
+ * 2. Bad block management (BBM)
+ * -> bad block replace scheme
+ *
+ * Currently we do nothing
+ */
+ return 0;
+}
+
+/**
+ * onenand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
+ * @param mtd MTD device structure
+ * @param ofs offset relative to mtd start
+ */
+int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ /* see above */
+ return 0;
+}
+
+/**
+ * onenand_unlock - [MTD Interface] Unlock block(s)
+ * @param mtd MTD device structure
+ * @param ofs offset relative to mtd start
+ * @param len number of bytes to unlock
+ *
+ * Unlock one or more blocks
+ */
+int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+ struct onenand_chip *this = mtd->priv;
+ int start, end, block, value, status;
+
+ start = ofs >> this->erase_shift;
+ end = len >> this->erase_shift;
+
+ /* Continuous lock scheme */
+ if (this->options & ONENAND_CONT_LOCK) {
+ /* Set start block address */
+ this->write_word(start,
+ this->base + ONENAND_REG_START_BLOCK_ADDRESS);
+ /* Set end block address */
+ this->write_word(end - 1,
+ this->base + ONENAND_REG_END_BLOCK_ADDRESS);
+ /* Write unlock command */
+ this->command(mtd, ONENAND_CMD_UNLOCK, 0, 0);
+
+ /* There's no return value */
+ this->wait(mtd, FL_UNLOCKING);
+
+ /* Sanity check */
+ while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
+ & ONENAND_CTRL_ONGO)
+ continue;
+
+ /* Check lock status */
+ status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
+ if (!(status & ONENAND_WP_US))
+ printk(KERN_ERR "wp status = 0x%x\n", status);
+
+ return 0;
+ }
+
+ /* Block lock scheme */
+ for (block = start; block < end; block++) {
+ /* Set start block address */
+ this->write_word(block,
+ this->base + ONENAND_REG_START_BLOCK_ADDRESS);
+ /* Write unlock command */
+ this->command(mtd, ONENAND_CMD_UNLOCK, 0, 0);
+
+ /* There's no return value */
+ this->wait(mtd, FL_UNLOCKING);
+
+ /* Sanity check */
+ while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
+ & ONENAND_CTRL_ONGO)
+ continue;
+
+ /* Set block address for read block status */
+ value = onenand_block_address(this->device_id, block);
+ this->write_word(value,
+ this->base + ONENAND_REG_START_ADDRESS1);
+
+ /* Check lock status */
+ status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
+ if (!(status & ONENAND_WP_US))
+ printk(KERN_ERR "block = %d, wp status = 0x%x\n",
+ block, status);
+ }
+
+ return 0;
+}
+
+/**
+ * onenand_print_device_info - Print device ID
+ * @param device device ID
+ *
+ * Print device ID
+ */
+void onenand_print_device_info(int device, int verbose)
+{
+ int vcc, demuxed, ddp, density;
+
+ if (!verbose)
+ return;
+
+ vcc = device & ONENAND_DEVICE_VCC_MASK;
+ demuxed = device & ONENAND_DEVICE_IS_DEMUX;
+ ddp = device & ONENAND_DEVICE_IS_DDP;
+ density = device >> ONENAND_DEVICE_DENSITY_SHIFT;
+ printk(KERN_INFO "%sOneNAND%s %dMB %sV 16-bit (0x%02x)\n",
+ demuxed ? "" : "Muxed ",
+ ddp ? "(DDP)" : "",
+ (16 << density), vcc ? "2.65/3.3" : "1.8", device);
+}
+
+static const struct onenand_manufacturers onenand_manuf_ids[] = {
+ {ONENAND_MFR_SAMSUNG, "Samsung"},
+ {ONENAND_MFR_UNKNOWN, "Unknown"}
+};
+
+/**
+ * onenand_check_maf - Check manufacturer ID
+ * @param manuf manufacturer ID
+ *
+ * Check manufacturer ID
+ */
+static int onenand_check_maf(int manuf)
+{
+ int i;
+
+ for (i = 0; onenand_manuf_ids[i].id; i++) {
+ if (manuf == onenand_manuf_ids[i].id)
+ break;
+ }
+
+#ifdef ONENAND_DEBUG
+ printk(KERN_DEBUG "OneNAND Manufacturer: %s (0x%0x)\n",
+ onenand_manuf_ids[i].name, manuf);
+#endif
+
+ return (i != ONENAND_MFR_UNKNOWN);
+}
+
+/**
+ * onenand_probe - [OneNAND Interface] Probe the OneNAND device
+ * @param mtd MTD device structure
+ *
+ * OneNAND detection method:
+ * Compare the the values from command with ones from register
+ */
+static int onenand_probe(struct mtd_info *mtd)
+{
+ struct onenand_chip *this = mtd->priv;
+ int bram_maf_id, bram_dev_id, maf_id, dev_id;
+ int version_id;
+ int density;
+
+ /* Send the command for reading device ID from BootRAM */
+ this->write_word(ONENAND_CMD_READID, this->base + ONENAND_BOOTRAM);
+
+ /* Read manufacturer and device IDs from BootRAM */
+ bram_maf_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x0);
+ bram_dev_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x2);
+
+ /* Check manufacturer ID */
+ if (onenand_check_maf(bram_maf_id))
+ return -ENXIO;
+
+ /* Reset OneNAND to read default register values */
+ this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_BOOTRAM);
+
+ {
+ int i;
+ for (i = 0; i < 10000; i++) ;
+ }
+
+ /* Read manufacturer and device IDs from Register */
+ maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
+ dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
+
+ /* Check OneNAND device */
+ if (maf_id != bram_maf_id || dev_id != bram_dev_id)
+ return -ENXIO;
+
+ /* Flash device information */
+ onenand_print_device_info(dev_id, 0);
+ this->device_id = dev_id;
+
+ density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT;
+ this->chipsize = (16 << density) << 20;
+
+ /* OneNAND page size & block size */
+ /* The data buffer size is equal to page size */
+ mtd->oobblock =
+ this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE);
+ mtd->oobsize = mtd->oobblock >> 5;
+ /* Pagers per block is always 64 in OneNAND */
+ mtd->erasesize = mtd->oobblock << 6;
+
+ this->erase_shift = ffs(mtd->erasesize) - 1;
+ this->page_shift = ffs(mtd->oobblock) - 1;
+ this->ppb_shift = (this->erase_shift - this->page_shift);
+ this->page_mask = (mtd->erasesize / mtd->oobblock) - 1;
+
+ /* REVIST: Multichip handling */
+
+ mtd->size = this->chipsize;
+
+ /* Version ID */
+ version_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
+#ifdef ONENAND_DEBUG
+ printk(KERN_DEBUG "OneNAND version = 0x%04x\n", version_id);
+#endif
+
+ /* Lock scheme */
+ if (density <= ONENAND_DEVICE_DENSITY_512Mb &&
+ !(version_id >> ONENAND_VERSION_PROCESS_SHIFT)) {
+ printk(KERN_INFO "Lock scheme is Continues Lock\n");
+ this->options |= ONENAND_CONT_LOCK;
+ }
+
+ return 0;
+}
+
+/**
+ * onenand_scan - [OneNAND Interface] Scan for the OneNAND device
+ * @param mtd MTD device structure
+ * @param maxchips Number of chips to scan for
+ *
+ * This fills out all the not initialized function pointers
+ * with the defaults.
+ * The flash ID is read and the mtd/chip structures are
+ * filled with the appropriate values.
+ */
+int onenand_scan(struct mtd_info *mtd, int maxchips)
+{
+ struct onenand_chip *this = mtd->priv;
+
+ if (!this->read_word)
+ this->read_word = onenand_readw;
+ if (!this->write_word)
+ this->write_word = onenand_writew;
+
+ if (!this->command)
+ this->command = onenand_command;
+ if (!this->wait)
+ this->wait = onenand_wait;
+
+ if (!this->read_bufferram)
+ this->read_bufferram = onenand_read_bufferram;
+ if (!this->write_bufferram)
+ this->write_bufferram = onenand_write_bufferram;
+
+ if (onenand_probe(mtd))
+ return -ENXIO;
+
+ /* Set Sync. Burst Read after probing */
+ if (this->mmcontrol) {
+ printk(KERN_INFO "OneNAND Sync. Burst Read support\n");
+ this->read_bufferram = onenand_sync_read_bufferram;
+ }
+
+ onenand_unlock(mtd, 0, mtd->size);
+
+ return onenand_default_bbt(mtd);
+}
+
+/**
+ * onenand_release - [OneNAND Interface] Free resources held by the OneNAND device
+ * @param mtd MTD device structure
+ */
+void onenand_release(struct mtd_info *mtd)
+{
+}
+
+/*
+ * OneNAND initialization at U-Boot
+ */
+struct mtd_info onenand_mtd;
+struct onenand_chip onenand_chip;
+
+void onenand_init(void)
+{
+ memset(&onenand_mtd, 0, sizeof(struct mtd_info));
+ memset(&onenand_chip, 0, sizeof(struct onenand_chip));
+
+ onenand_chip.base = (void *)CFG_ONENAND_BASE;
+ onenand_mtd.priv = &onenand_chip;
+
+ onenand_scan(&onenand_mtd, 1);
+
+ puts("OneNAND: ");
+ print_size(onenand_mtd.size, "\n");
+}
+
+#endif /* CONFIG_CMD_ONENAND */
diff --git a/drivers/onenand/onenand_bbt.c b/drivers/onenand/onenand_bbt.c
new file mode 100644
index 0000000..5a610ee
--- /dev/null
+++ b/drivers/onenand/onenand_bbt.c
@@ -0,0 +1,265 @@
+/*
+ * linux/drivers/mtd/onenand/onenand_bbt.c
+ *
+ * Bad Block Table support for the OneNAND driver
+ *
+ * Copyright(c) 2005-2007 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * TODO:
+ * Split BBT core and chip specific BBT.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_CMD_ONENAND
+
+#include <linux/mtd/compat.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+#include <malloc.h>
+
+#include <asm/errno.h>
+
+/**
+ * check_short_pattern - [GENERIC] check if a pattern is in the buffer
+ * @param buf the buffer to search
+ * @param len the length of buffer to search
+ * @param paglen the pagelength
+ * @param td search pattern descriptor
+ *
+ * Check for a pattern at the given place. Used to search bad block
+ * tables and good / bad block identifiers. Same as check_pattern, but
+ * no optional empty check and the pattern is expected to start
+ * at offset 0.
+ */
+static int check_short_pattern(uint8_t * buf, int len, int paglen,
+ struct nand_bbt_descr *td)
+{
+ int i;
+ uint8_t *p = buf;
+
+ /* Compare the pattern */
+ for (i = 0; i < td->len; i++) {
+ if (p[i] != td->pattern[i])
+ return -1;
+ }
+ return 0;
+}
+
+/**
+ * create_bbt - [GENERIC] Create a bad block table by scanning the device
+ * @param mtd MTD device structure
+ * @param buf temporary buffer
+ * @param bd descriptor for the good/bad block search pattern
+ * @param chip create the table for a specific chip, -1 read all chips.
+ * Applies only if NAND_BBT_PERCHIP option is set
+ *
+ * Create a bad block table by scanning the device
+ * for the given good/bad block identify pattern
+ */
+static int create_bbt(struct mtd_info *mtd, uint8_t * buf,
+ struct nand_bbt_descr *bd, int chip)
+{
+ struct onenand_chip *this = mtd->priv;
+ struct bbm_info *bbm = this->bbm;
+ int i, j, numblocks, len, scanlen;
+ int startblock;
+ loff_t from;
+ size_t readlen, ooblen;
+
+ printk(KERN_INFO "Scanning device for bad blocks\n");
+
+ len = 1;
+
+ /* We need only read few bytes from the OOB area */
+ scanlen = ooblen = 0;
+ readlen = bd->len;
+
+ /* chip == -1 case only */
+ /* Note that numblocks is 2 * (real numblocks) here;
+ * see i += 2 below as it makses shifting and masking less painful
+ */
+ numblocks = mtd->size >> (bbm->bbt_erase_shift - 1);
+ startblock = 0;
+ from = 0;
+
+ for (i = startblock; i < numblocks;) {
+ int ret;
+
+ for (j = 0; j < len; j++) {
+ size_t retlen;
+
+ /* No need to read pages fully,
+ * just read required OOB bytes */
+ ret = onenand_read_oob(mtd,
+ from + j * mtd->oobblock +
+ bd->offs, readlen, &retlen,
+ &buf[0]);
+
+ if (ret && ret != -EAGAIN) {
+ printk("ret = %d\n", ret);
+ return ret;
+ }
+
+ if (check_short_pattern
+ (&buf[j * scanlen], scanlen, mtd->oobblock, bd)) {
+ bbm->bbt[i >> 3] |= 0x03 << (i & 0x6);
+ printk(KERN_WARNING
+ "Bad eraseblock %d at 0x%08x\n", i >> 1,
+ (unsigned int)from);
+ break;
+ }
+ }
+ i += 2;
+ from += (1 << bbm->bbt_erase_shift);
+ }
+
+ return 0;
+}
+
+/**
+ * onenand_memory_bbt - [GENERIC] create a memory based bad block table
+ * @param mtd MTD device structure
+ * @param bd descriptor for the good/bad block search pattern
+ *
+ * The function creates a memory based bbt by scanning the device
+ * for manufacturer / software marked good / bad blocks
+ */
+static inline int onenand_memory_bbt(struct mtd_info *mtd,
+ struct nand_bbt_descr *bd)
+{
+ unsigned char data_buf[MAX_ONENAND_PAGESIZE];
+
+ bd->options &= ~NAND_BBT_SCANEMPTY;
+ return create_bbt(mtd, data_buf, bd, -1);
+}
+
+/**
+ * onenand_isbad_bbt - [OneNAND Interface] Check if a block is bad
+ * @param mtd MTD device structure
+ * @param offs offset in the device
+ * @param allowbbt allow access to bad block table region
+ */
+static int onenand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
+{
+ struct onenand_chip *this = mtd->priv;
+ struct bbm_info *bbm = this->bbm;
+ int block;
+ uint8_t res;
+
+ /* Get block number * 2 */
+ block = (int)(offs >> (bbm->bbt_erase_shift - 1));
+ res = (bbm->bbt[block >> 3] >> (block & 0x06)) & 0x03;
+
+ DEBUG(MTD_DEBUG_LEVEL2,
+ "onenand_isbad_bbt: bbt info for offs 0x%08x: (block %d) 0x%02x\n",
+ (unsigned int)offs, block >> 1, res);
+
+ switch ((int)res) {
+ case 0x00:
+ return 0;
+ case 0x01:
+ return 1;
+ case 0x02:
+ return allowbbt ? 0 : 1;
+ }
+
+ return 1;
+}
+
+/**
+ * onenand_scan_bbt - [OneNAND Interface] scan, find, read and maybe create bad block table(s)
+ * @param mtd MTD device structure
+ * @param bd descriptor for the good/bad block search pattern
+ *
+ * The function checks, if a bad block table(s) is/are already
+ * available. If not it scans the device for manufacturer
+ * marked good / bad blocks and writes the bad block table(s) to
+ * the selected place.
+ *
+ * The bad block table memory is allocated here. It must be freed
+ * by calling the onenand_free_bbt function.
+ *
+ */
+int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
+{
+ struct onenand_chip *this = mtd->priv;
+ struct bbm_info *bbm = this->bbm;
+ int len, ret = 0;
+
+ len = mtd->size >> (this->erase_shift + 2);
+ /* Allocate memory (2bit per block) */
+ bbm->bbt = malloc(len);
+ if (!bbm->bbt) {
+ printk(KERN_ERR "onenand_scan_bbt: Out of memory\n");
+ return -ENOMEM;
+ }
+ /* Clear the memory bad block table */
+ memset(bbm->bbt, 0x00, len);
+
+ /* Set the bad block position */
+ bbm->badblockpos = ONENAND_BADBLOCK_POS;
+
+ /* Set erase shift */
+ bbm->bbt_erase_shift = this->erase_shift;
+
+ if (!bbm->isbad_bbt)
+ bbm->isbad_bbt = onenand_isbad_bbt;
+
+ /* Scan the device to build a memory based bad block table */
+ if ((ret = onenand_memory_bbt(mtd, bd))) {
+ printk(KERN_ERR
+ "onenand_scan_bbt: Can't scan flash and build the RAM-based BBT\n");
+ free(bbm->bbt);
+ bbm->bbt = NULL;
+ }
+
+ return ret;
+}
+
+/*
+ * Define some generic bad / good block scan pattern which are used
+ * while scanning a device for factory marked good / bad blocks.
+ */
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr largepage_memorybased = {
+ .options = 0,
+ .offs = 0,
+ .len = 2,
+ .pattern = scan_ff_pattern,
+};
+
+/**
+ * onenand_default_bbt - [OneNAND Interface] Select a default bad block table for the device
+ * @param mtd MTD device structure
+ *
+ * This function selects the default bad block table
+ * support for the device and calls the onenand_scan_bbt function
+ */
+int onenand_default_bbt(struct mtd_info *mtd)
+{
+ struct onenand_chip *this = mtd->priv;
+ struct bbm_info *bbm;
+
+ this->bbm = malloc(sizeof(struct bbm_info));
+ if (!this->bbm)
+ return -ENOMEM;
+
+ bbm = this->bbm;
+
+ memset(bbm, 0, sizeof(struct bbm_info));
+
+ /* 1KB page has same configuration as 2KB page */
+ if (!bbm->badblock_pattern)
+ bbm->badblock_pattern = &largepage_memorybased;
+
+ return onenand_scan_bbt(mtd, bbm->badblock_pattern);
+}
+
+#endif /* CFG_CMD_ONENAND */
diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h
index 77ea025..d7ef65d 100644
--- a/include/config_cmd_all.h
+++ b/include/config_cmd_all.h
@@ -59,6 +59,7 @@
#define CONFIG_CMD_NAND /* NAND support */
#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
#define CONFIG_CMD_NFS /* NFS support */
+#define CONFIG_CMD_ONENAND /* OneNAND support */
#define CONFIG_CMD_PCI /* pciinfo */
#define CONFIG_CMD_PCMCIA /* PCMCIA support */
#define CONFIG_CMD_PING /* ping support */
diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
new file mode 100644
index 0000000..f194cf1
--- /dev/null
+++ b/include/linux/mtd/bbm.h
@@ -0,0 +1,127 @@
+/*
+ * linux/include/linux/mtd/bbm.h
+ *
+ * NAND family Bad Block Management (BBM) header file
+ * - Bad Block Table (BBT) implementation
+ *
+ * Copyright (c) 2005-2007 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * Copyright (c) 2000-2005
+ * Thomas Gleixner <tglx@linuxtronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __LINUX_MTD_BBM_H
+#define __LINUX_MTD_BBM_H
+
+/* The maximum number of NAND chips in an array */
+#ifndef NAND_MAX_CHIPS
+#define NAND_MAX_CHIPS 8
+#endif
+
+/**
+ * struct nand_bbt_descr - bad block table descriptor
+ * @param options options for this descriptor
+ * @param pages the page(s) where we find the bbt, used with
+ * option BBT_ABSPAGE when bbt is searched,
+ * then we store the found bbts pages here.
+ * Its an array and supports up to 8 chips now
+ * @param offs offset of the pattern in the oob area of the page
+ * @param veroffs offset of the bbt version counter in the oob are of the page
+ * @param version version read from the bbt page during scan
+ * @param len length of the pattern, if 0 no pattern check is performed
+ * @param maxblocks maximum number of blocks to search for a bbt. This number of
+ * blocks is reserved at the end of the device
+ * where the tables are written.
+ * @param reserved_block_code if non-0, this pattern denotes a reserved
+ * (rather than bad) block in the stored bbt
+ * @param pattern pattern to identify bad block table or factory marked
+ * good / bad blocks, can be NULL, if len = 0
+ *
+ * Descriptor for the bad block table marker and the descriptor for the
+ * pattern which identifies good and bad blocks. The assumption is made
+ * that the pattern and the version count are always located in the oob area
+ * of the first block.
+ */
+struct nand_bbt_descr {
+ int options;
+ int pages[NAND_MAX_CHIPS];
+ int offs;
+ int veroffs;
+ uint8_t version[NAND_MAX_CHIPS];
+ int len;
+ int maxblocks;
+ int reserved_block_code;
+ uint8_t *pattern;
+};
+
+/* Options for the bad block table descriptors */
+
+/* The number of bits used per block in the bbt on the device */
+#define NAND_BBT_NRBITS_MSK 0x0000000F
+#define NAND_BBT_1BIT 0x00000001
+#define NAND_BBT_2BIT 0x00000002
+#define NAND_BBT_4BIT 0x00000004
+#define NAND_BBT_8BIT 0x00000008
+/* The bad block table is in the last good block of the device */
+#define NAND_BBT_LASTBLOCK 0x00000010
+/* The bbt is at the given page, else we must scan for the bbt */
+#define NAND_BBT_ABSPAGE 0x00000020
+/* The bbt is at the given page, else we must scan for the bbt */
+#define NAND_BBT_SEARCH 0x00000040
+/* bbt is stored per chip on multichip devices */
+#define NAND_BBT_PERCHIP 0x00000080
+/* bbt has a version counter at offset veroffs */
+#define NAND_BBT_VERSION 0x00000100
+/* Create a bbt if none axists */
+#define NAND_BBT_CREATE 0x00000200
+/* Search good / bad pattern through all pages of a block */
+#define NAND_BBT_SCANALLPAGES 0x00000400
+/* Scan block empty during good / bad block scan */
+#define NAND_BBT_SCANEMPTY 0x00000800
+/* Write bbt if neccecary */
+#define NAND_BBT_WRITE 0x00001000
+/* Read and write back block contents when writing bbt */
+#define NAND_BBT_SAVECONTENT 0x00002000
+/* Search good / bad pattern on the first and the second page */
+#define NAND_BBT_SCAN2NDPAGE 0x00004000
+
+/* The maximum number of blocks to scan for a bbt */
+#define NAND_BBT_SCAN_MAXBLOCKS 4
+
+/*
+ * Constants for oob configuration
+ */
+#define ONENAND_BADBLOCK_POS 0
+
+/**
+ * struct bbt_info - [GENERIC] Bad Block Table data structure
+ * @param bbt_erase_shift [INTERN] number of address bits in a bbt entry
+ * @param badblockpos [INTERN] position of the bad block marker in the oob area
+ * @param bbt [INTERN] bad block table pointer
+ * @param badblock_pattern [REPLACEABLE] bad block scan pattern used for initial bad block scan
+ * @param priv [OPTIONAL] pointer to private bbm date
+ */
+struct bbm_info {
+ int bbt_erase_shift;
+ int badblockpos;
+ int options;
+
+ uint8_t *bbt;
+
+ int (*isbad_bbt) (struct mtd_info * mtd, loff_t ofs, int allowbbt);
+
+ /* TODO Add more NAND specific fileds */
+ struct nand_bbt_descr *badblock_pattern;
+
+ void *priv;
+};
+
+/* OneNAND BBT interface */
+extern int onenand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd);
+extern int onenand_default_bbt (struct mtd_info *mtd);
+
+#endif /* __LINUX_MTD_BBM_H */
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
new file mode 100644
index 0000000..4b0c2df
--- /dev/null
+++ b/include/linux/mtd/onenand.h
@@ -0,0 +1,143 @@
+/*
+ * linux/include/linux/mtd/onenand.h
+ *
+ * Copyright (C) 2005-2007 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_MTD_ONENAND_H
+#define __LINUX_MTD_ONENAND_H
+
+#include <linux/mtd/onenand_regs.h>
+
+/* Note: The header order is impoertant */
+#include <onenand_uboot.h>
+
+#include <linux/mtd/bbm.h>
+
+#define MAX_BUFFERRAM 2
+#define MAX_ONENAND_PAGESIZE (2048 + 64)
+
+/* Scan and identify a OneNAND device */
+extern int onenand_scan (struct mtd_info *mtd, int max_chips);
+/* Free resources held by the OneNAND device */
+extern void onenand_release (struct mtd_info *mtd);
+
+/**
+ * onenand_state_t - chip states
+ * Enumeration for OneNAND flash chip state
+ */
+typedef enum {
+ FL_READY,
+ FL_READING,
+ FL_WRITING,
+ FL_ERASING,
+ FL_SYNCING,
+ FL_UNLOCKING,
+ FL_LOCKING,
+} onenand_state_t;
+
+/**
+ * struct onenand_bufferram - OneNAND BufferRAM Data
+ * @param block block address in BufferRAM
+ * @param page page address in BufferRAM
+ * @param valid valid flag
+ */
+struct onenand_bufferram {
+ int block;
+ int page;
+ int valid;
+};
+
+/**
+ * struct onenand_chip - OneNAND Private Flash Chip Data
+ * @param base [BOARDSPECIFIC] address to access OneNAND
+ * @param chipsize [INTERN] the size of one chip for multichip arrays
+ * @param device_id [INTERN] device ID
+ * @param verstion_id [INTERN] version ID
+ * @param options [BOARDSPECIFIC] various chip options. They can partly be set to inform onenand_scan about
+ * @param erase_shift [INTERN] number of address bits in a block
+ * @param page_shift [INTERN] number of address bits in a page
+ * @param ppb_shift [INTERN] number of address bits in a pages per block
+ * @param page_mask [INTERN] a page per block mask
+ * @param bufferam_index [INTERN] BufferRAM index
+ * @param bufferam [INTERN] BufferRAM info
+ * @param readw [REPLACEABLE] hardware specific function for read short
+ * @param writew [REPLACEABLE] hardware specific function for write short
+ * @param command [REPLACEABLE] hardware specific function for writing commands to the chip
+ * @param wait [REPLACEABLE] hardware specific function for wait on ready
+ * @param read_bufferram [REPLACEABLE] hardware specific function for BufferRAM Area
+ * @param write_bufferram [REPLACEABLE] hardware specific function for BufferRAM Area
+ * @param chip_lock [INTERN] spinlock used to protect access to this structure and the chip
+ * @param wq [INTERN] wait queue to sleep on if a OneNAND operation is in progress
+ * @param state [INTERN] the current state of the OneNAND device
+ * @param autooob [REPLACEABLE] the default (auto)placement scheme
+ * @param priv [OPTIONAL] pointer to private chip date
+ */
+struct onenand_chip {
+ void __iomem *base;
+ unsigned int chipsize;
+ unsigned int device_id;
+ unsigned int options;
+
+ unsigned int erase_shift;
+ unsigned int page_shift;
+ unsigned int ppb_shift; /* Pages per block shift */
+ unsigned int page_mask;
+
+ unsigned int bufferram_index;
+ struct onenand_bufferram bufferram[MAX_BUFFERRAM];
+
+ int (*command) (struct mtd_info * mtd, int cmd, loff_t address,
+ size_t len);
+ int (*wait) (struct mtd_info * mtd, int state);
+ int (*read_bufferram) (struct mtd_info * mtd, int area,
+ unsigned char *buffer, int offset, size_t count);
+ int (*write_bufferram) (struct mtd_info * mtd, int area,
+ const unsigned char *buffer, int offset,
+ size_t count);
+ unsigned short (*read_word) (void __iomem * addr);
+ void (*write_word) (unsigned short value, void __iomem * addr);
+ void (*mmcontrol) (struct mtd_info * mtd, int sync_read);
+
+ spinlock_t chip_lock;
+ wait_queue_head_t wq;
+ onenand_state_t state;
+
+ struct nand_oobinfo *autooob;
+
+ void *bbm;
+
+ void *priv;
+};
+
+#define ONENAND_CURRENT_BUFFERRAM(this) (this->bufferram_index)
+#define ONENAND_NEXT_BUFFERRAM(this) (this->bufferram_index ^ 1)
+#define ONENAND_SET_NEXT_BUFFERRAM(this) (this->bufferram_index ^= 1)
+
+/*
+ * Options bits
+ */
+#define ONENAND_CONT_LOCK (0x0001)
+
+/*
+ * OneNAND Flash Manufacturer ID Codes
+ */
+#define ONENAND_MFR_SAMSUNG 0xec
+#define ONENAND_MFR_UNKNOWN 0x00
+
+/**
+ * struct nand_manufacturers - NAND Flash Manufacturer ID Structure
+ * @param name: Manufacturer name
+ * @param id: manufacturer ID code of device.
+*/
+struct onenand_manufacturers {
+ int id;
+ char *name;
+};
+
+#endif /* __LINUX_MTD_ONENAND_H */
diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h
new file mode 100644
index 0000000..c8a9f3e
--- /dev/null
+++ b/include/linux/mtd/onenand_regs.h
@@ -0,0 +1,181 @@
+/*
+ * linux/include/linux/mtd/onenand_regs.h
+ *
+ * OneNAND Register header file
+ *
+ * Copyright (C) 2005-2007 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ONENAND_REG_H
+#define __ONENAND_REG_H
+
+/* Memory Address Map Translation (Word order) */
+#define ONENAND_MEMORY_MAP(x) ((x) << 1)
+
+/*
+ * External BufferRAM area
+ */
+#define ONENAND_BOOTRAM ONENAND_MEMORY_MAP(0x0000)
+#define ONENAND_DATARAM ONENAND_MEMORY_MAP(0x0200)
+#define ONENAND_SPARERAM ONENAND_MEMORY_MAP(0x8010)
+
+/*
+ * OneNAND Registers
+ */
+#define ONENAND_REG_MANUFACTURER_ID ONENAND_MEMORY_MAP(0xF000)
+#define ONENAND_REG_DEVICE_ID ONENAND_MEMORY_MAP(0xF001)
+#define ONENAND_REG_VERSION_ID ONENAND_MEMORY_MAP(0xF002)
+#define ONENAND_REG_DATA_BUFFER_SIZE ONENAND_MEMORY_MAP(0xF003)
+#define ONENAND_REG_BOOT_BUFFER_SIZE ONENAND_MEMORY_MAP(0xF004)
+#define ONENAND_REG_NUM_BUFFERS ONENAND_MEMORY_MAP(0xF005)
+#define ONENAND_REG_TECHNOLOGY ONENAND_MEMORY_MAP(0xF006)
+
+#define ONENAND_REG_START_ADDRESS1 ONENAND_MEMORY_MAP(0xF100)
+#define ONENAND_REG_START_ADDRESS2 ONENAND_MEMORY_MAP(0xF101)
+#define ONENAND_REG_START_ADDRESS3 ONENAND_MEMORY_MAP(0xF102)
+#define ONENAND_REG_START_ADDRESS4 ONENAND_MEMORY_MAP(0xF103)
+#define ONENAND_REG_START_ADDRESS5 ONENAND_MEMORY_MAP(0xF104)
+#define ONENAND_REG_START_ADDRESS6 ONENAND_MEMORY_MAP(0xF105)
+#define ONENAND_REG_START_ADDRESS7 ONENAND_MEMORY_MAP(0xF106)
+#define ONENAND_REG_START_ADDRESS8 ONENAND_MEMORY_MAP(0xF107)
+
+#define ONENAND_REG_START_BUFFER ONENAND_MEMORY_MAP(0xF200)
+#define ONENAND_REG_COMMAND ONENAND_MEMORY_MAP(0xF220)
+#define ONENAND_REG_SYS_CFG1 ONENAND_MEMORY_MAP(0xF221)
+#define ONENAND_REG_SYS_CFG2 ONENAND_MEMORY_MAP(0xF222)
+#define ONENAND_REG_CTRL_STATUS ONENAND_MEMORY_MAP(0xF240)
+#define ONENAND_REG_INTERRUPT ONENAND_MEMORY_MAP(0xF241)
+#define ONENAND_REG_START_BLOCK_ADDRESS ONENAND_MEMORY_MAP(0xF24C)
+#define ONENAND_REG_END_BLOCK_ADDRESS ONENAND_MEMORY_MAP(0xF24D)
+#define ONENAND_REG_WP_STATUS ONENAND_MEMORY_MAP(0xF24E)
+
+#define ONENAND_REG_ECC_STATUS ONENAND_MEMORY_MAP(0xFF00)
+#define ONENAND_REG_ECC_M0 ONENAND_MEMORY_MAP(0xFF01)
+#define ONENAND_REG_ECC_S0 ONENAND_MEMORY_MAP(0xFF02)
+#define ONENAND_REG_ECC_M1 ONENAND_MEMORY_MAP(0xFF03)
+#define ONENAND_REG_ECC_S1 ONENAND_MEMORY_MAP(0xFF04)
+#define ONENAND_REG_ECC_M2 ONENAND_MEMORY_MAP(0xFF05)
+#define ONENAND_REG_ECC_S2 ONENAND_MEMORY_MAP(0xFF06)
+#define ONENAND_REG_ECC_M3 ONENAND_MEMORY_MAP(0xFF07)
+#define ONENAND_REG_ECC_S3 ONENAND_MEMORY_MAP(0xFF08)
+
+/*
+ * Device ID Register F001h (R)
+ */
+#define ONENAND_DEVICE_DENSITY_SHIFT (4)
+#define ONENAND_DEVICE_IS_DDP (1 << 3)
+#define ONENAND_DEVICE_IS_DEMUX (1 << 2)
+#define ONENAND_DEVICE_VCC_MASK (0x3)
+
+#define ONENAND_DEVICE_DENSITY_512Mb (0x002)
+
+/*
+ * Version ID Register F002h (R)
+ */
+#define ONENAND_VERSION_PROCESS_SHIFT (8)
+
+/*
+ * Start Address 1 F100h (R/W)
+ */
+#define ONENAND_DDP_SHIFT (15)
+
+/*
+ * Start Address 8 F107h (R/W)
+ */
+#define ONENAND_FPA_MASK (0x3f)
+#define ONENAND_FPA_SHIFT (2)
+#define ONENAND_FSA_MASK (0x03)
+
+/*
+ * Start Buffer Register F200h (R/W)
+ */
+#define ONENAND_BSA_MASK (0x03)
+#define ONENAND_BSA_SHIFT (8)
+#define ONENAND_BSA_BOOTRAM (0 << 2)
+#define ONENAND_BSA_DATARAM0 (2 << 2)
+#define ONENAND_BSA_DATARAM1 (3 << 2)
+#define ONENAND_BSC_MASK (0x03)
+
+/*
+ * Command Register F220h (R/W)
+ */
+#define ONENAND_CMD_READ (0x00)
+#define ONENAND_CMD_READOOB (0x13)
+#define ONENAND_CMD_PROG (0x80)
+#define ONENAND_CMD_PROGOOB (0x1A)
+#define ONENAND_CMD_UNLOCK (0x23)
+#define ONENAND_CMD_LOCK (0x2A)
+#define ONENAND_CMD_LOCK_TIGHT (0x2C)
+#define ONENAND_CMD_ERASE (0x94)
+#define ONENAND_CMD_RESET (0xF0)
+#define ONENAND_CMD_READID (0x90)
+
+/* NOTE: Those are not *REAL* commands */
+#define ONENAND_CMD_BUFFERRAM (0x1978)
+
+/*
+ * System Configuration 1 Register F221h (R, R/W)
+ */
+#define ONENAND_SYS_CFG1_SYNC_READ (1 << 15)
+#define ONENAND_SYS_CFG1_BRL_7 (7 << 12)
+#define ONENAND_SYS_CFG1_BRL_6 (6 << 12)
+#define ONENAND_SYS_CFG1_BRL_5 (5 << 12)
+#define ONENAND_SYS_CFG1_BRL_4 (4 << 12)
+#define ONENAND_SYS_CFG1_BRL_3 (3 << 12)
+#define ONENAND_SYS_CFG1_BRL_10 (2 << 12)
+#define ONENAND_SYS_CFG1_BRL_9 (1 << 12)
+#define ONENAND_SYS_CFG1_BRL_8 (0 << 12)
+#define ONENAND_SYS_CFG1_BRL_SHIFT (12)
+#define ONENAND_SYS_CFG1_BL_32 (4 << 9)
+#define ONENAND_SYS_CFG1_BL_16 (3 << 9)
+#define ONENAND_SYS_CFG1_BL_8 (2 << 9)
+#define ONENAND_SYS_CFG1_BL_4 (1 << 9)
+#define ONENAND_SYS_CFG1_BL_CONT (0 << 9)
+#define ONENAND_SYS_CFG1_BL_SHIFT (9)
+#define ONENAND_SYS_CFG1_NO_ECC (1 << 8)
+#define ONENAND_SYS_CFG1_RDY (1 << 7)
+#define ONENAND_SYS_CFG1_INT (1 << 6)
+#define ONENAND_SYS_CFG1_IOBE (1 << 5)
+#define ONENAND_SYS_CFG1_RDY_CONF (1 << 4)
+
+/*
+ * Controller Status Register F240h (R)
+ */
+#define ONENAND_CTRL_ONGO (1 << 15)
+#define ONENAND_CTRL_LOCK (1 << 14)
+#define ONENAND_CTRL_LOAD (1 << 13)
+#define ONENAND_CTRL_PROGRAM (1 << 12)
+#define ONENAND_CTRL_ERASE (1 << 11)
+#define ONENAND_CTRL_ERROR (1 << 10)
+#define ONENAND_CTRL_RSTB (1 << 7)
+
+/*
+ * Interrupt Status Register F241h (R)
+ */
+#define ONENAND_INT_MASTER (1 << 15)
+#define ONENAND_INT_READ (1 << 7)
+#define ONENAND_INT_WRITE (1 << 6)
+#define ONENAND_INT_ERASE (1 << 5)
+#define ONENAND_INT_RESET (1 << 4)
+#define ONENAND_INT_CLEAR (0 << 0)
+
+/*
+ * NAND Flash Write Protection Status Register F24Eh (R)
+ */
+#define ONENAND_WP_US (1 << 2)
+#define ONENAND_WP_LS (1 << 1)
+#define ONENAND_WP_LTS (1 << 0)
+
+/*
+ * ECC Status Reigser FF00h (R)
+ */
+#define ONENAND_ECC_1BIT (1 << 0)
+#define ONENAND_ECC_2BIT (1 << 1)
+#define ONENAND_ECC_2BIT_ALL (0xAAAA)
+
+#endif /* __ONENAND_REG_H */
diff --git a/include/onenand_uboot.h b/include/onenand_uboot.h
new file mode 100644
index 0000000..bd1831e
--- /dev/null
+++ b/include/onenand_uboot.h
@@ -0,0 +1,39 @@
+/*
+ * Header file for OneNAND support for U-Boot
+ *
+ * Adaptation from kernel to U-Boot
+ *
+ * Copyright (C) 2005-2007 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UBOOT_ONENAND_H
+#define __UBOOT_ONENAND_H
+
+struct kvec {
+ void *iov_base;
+ size_t iov_len;
+};
+
+typedef int spinlock_t;
+typedef int wait_queue_head_t;
+
+/* Functions */
+extern void onenand_init(void);
+extern int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t * retlen, u_char * buf);
+extern int onenand_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t * retlen, u_char * buf);
+extern int onenand_write(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t * retlen, const u_char * buf);
+extern int onenand_erase(struct mtd_info *mtd, struct erase_info *instr);
+
+extern int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len);
+
+extern void onenand_print_device_info(int device, int verbose);
+
+#endif /* __UBOOT_ONENAND_H */
diff --git a/lib_arm/board.c b/lib_arm/board.c
index af0233a..7e97f13 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -58,6 +58,10 @@ DECLARE_GLOBAL_DATA_PTR;
void nand_init (void);
#endif
+#if defined(CONFIG_CMD_ONENAND)
+void onenand_init(void);
+#endif
+
ulong monitor_flash_len;
#ifdef CONFIG_HAS_DATAFLASH
@@ -320,6 +324,10 @@ void start_armboot (void)
nand_init(); /* go init the NAND */
#endif
+#if defined(CONFIG_CMD_ONENAND)
+ onenand_init();
+#endif
+
#ifdef CONFIG_HAS_DATAFLASH
AT91F_DataflashInit();
dataflash_print_info();
generated by cgit v1.1 at 2024-11-15 23:20:30 +0000