diff options
| -rw-r--r-- | CHANGELOG | 496 | ||||
| -rw-r--r-- | onenand_ipl/board/apollon/low_levelinit.S | 10 |
2 files changed, 501 insertions, 5 deletions
@@ -1,3 +1,499 @@ +commit e7670f6c1e52ae6d2a43ff75a8bcfa7a5c86e47b +Author: Wolfgang Denk <wd@denx.de> +Date: Thu Feb 14 22:43:22 2008 +0100 + + PPC: Use r2 instead of r29 as global data pointer + + R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc + will refuse to use load/store multiple insns; instead, it issues a + list of simple load/store instructions upon function entry and exit, + resulting in bigger code size, which in turn makes the build for a + few boards fail. + + Use r2 instead. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 3c234efa693bc59906c2be55c7918ecbb55392ea +Author: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> +Date: Wed Jan 30 09:08:49 2008 +0100 + + ARM: make the machid configurable via the environment + + If the variable "machid" exists, let do_bootm_linux use that instead + of bd->bi_arch_number. + + Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> + +commit dd24058407c5add45cc60aec6c757ddc1a17e1b0 +Author: Vlad Lungu <vlad@comsys.ro> +Date: Wed Jan 23 16:34:46 2008 +0200 + + Use #ifdef CONFIG_FSLDMAFEC + + MCD_tasks.c lacks [subject] so compilation of mips targets (and more, probably) + fails + + Signed-off-by: Vlad Lungu <vlad@comsys.ro> + +commit 26c7bab81e08dc7bd696c48f753428a829629bd8 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Sat Jan 19 10:25:59 2008 +0900 + + common/miiphyutil.c: Cleanup MII_DEBUG and debug() + + Current MII_DEBUG is confusing in two ways. One is useless define-then- + undef at the top of the file. The other is there is only one debug() in + this file, and that doesn't seem worthwhile to bother having MII_DEBUG. + While there are many useful printf()/puts() debug codes, but they are for + DEBUG, not for MII_DEBUG. + + This patch tries to put them all together into MII_DEBUG and debug(). + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit 751b9b5189f3274b03c809172631316d6b002c82 +Author: Kyungmin Park <kmpark@infradead.org> +Date: Thu Jan 17 16:43:25 2008 +0900 + + OneNAND Initial Program Loader (IPL) support + + This patch enables the OneNAND boot within U-Boot. + Before this work, we used another OneNAND IPL called X-Loader based + on open source. With this work, we can build the oneboot.bin image + without other program. + + The build sequence is simple. + First, it compiles the u-boot.bin + Second, it compiles OneNAND IPL + Finally, it becomes the oneboot.bin from OneNAND IPL and u-boot.bin + The mechanism is similar with NAND boot except it boots from itself. + + Another thing is that you can only use the OneNAND IPL only to work + other bootloader such as RedBoot and so on. + + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + +commit 21f6f9636f0e978397548751347425fbf8d42bb3 +Author: Andy Fleming <afleming@freescale.com> +Date: Wed Jan 16 13:06:59 2008 -0600 + + Fix CONFIG_MMC usage in fat code + + A #if statement in fat.c depended on CONFIG_MMC, instead of + defined(CONFIG_MMC). This meant CONFIG_MMC needed to be defined + as "1" rather than just defined. Now it's better. + + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit f57d7d364ce189e39b0a64338d2f8012c074a2bd +Author: Rafal Jaworowski <raj@semihalf.com> +Date: Tue Jan 15 12:52:31 2008 +0100 + + ppc: Refactor cache routines, so there is only one common set. + + Signed-off-by: Rafal Jaworowski <raj@semihalf.com> + +commit fe891ecf4d187e9d11dde869ed4623af52b54451 +Author: Hiroshi Ito <ito@mlb.co.jp> +Date: Thu Jan 31 18:35:04 2008 +0900 + + NFS Timeout with large files. + + Retry to send NFS packet before reaching timeout. + + Signed-off-by: Hiroshi Ito <ito@mlb.co.jp> + +commit 88f72527f5b89c0905ad5c36cc2ef8d29dd6bbf0 +Author: Johannes Stezenbach <js@sig21.net> +Date: Tue Jan 29 00:11:25 2008 +0100 + + Add dependencies to avoid race conditions with parallel make. + + Signed-off-by: Johannes Stezenbach <js@sig21.net> + +commit 6d1b6f9f89c815eaca44acff8e73ece7181f61b6 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Jan 28 05:46:01 2008 -0500 + + Mark board_init_[fr] as noreturn + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 161b2af4d7b48fd602ce333c355a4df0337892bb +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Jan 28 05:28:50 2008 -0500 + + Only use TEXT_BASE if defined by the board + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 1b769881750030f10743808b9d6013e11f559350 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Fri Jan 25 07:54:47 2008 +0100 + + Fix remaining CONFIG_COMMANDS + + update comments + Fix coding style + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 0c9d42e6b0b83d507335a291e3ea99240038f4b9 +Author: Niklaus Giger <niklaus.giger@netstal.com> +Date: Mon Jan 21 16:46:00 2008 +0100 + + Add *~ to .gitignore + + One should never add a backup file ending in with ~ to the git repository. + + Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> + +commit 3cfb0c51b2bb5ede54eca85ace5b1ba12be314b0 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Jan 17 00:02:10 2008 -0600 + + Remove duplicate defines for ARRAY_SIZE + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit c77ce474b1c57b13e9d36d9830f147966c143694 +Author: Stelian Pop <stelian@popies.net> +Date: Mon Jan 14 22:08:14 2008 +0100 + + Fix incorrect address test in AT91F_DataflashSelect(). + + Signed-off-by: Stelian Pop <stelian@popies.net> + +commit d9ad115bbf7bb0842de7dbd2502b7e430f83cc3d +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Feb 13 15:09:58 2008 -0600 + + Fix building of fdt_support.c if DEBUG set + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit c62776be8dca4097ca03d4f9415f08d4887b45d0 +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Feb 12 00:45:06 2008 +0100 + + Get rid of "#undef DEBUG" from board config files. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 73bf1e2de7862bcdbd5a9f993b3e84b67c8ea9c8 +Author: Timur Tabi <timur@freescale.com> +Date: Tue Jan 15 17:09:41 2008 -0600 + + Remove #undef DEBUG from MPC83xx board header files + + Remove the "#undef DEBUG" line from all Freescale 83xx board header files. + The inclusion of this line makes it impossible to enable debug code in + other source files, because "#define DEBUG" typically needs to be defined + before any header files are included. + + Signed-off-by: Timur Tabi <timur@freescale.com> + +commit 69018ce2e086e9caf35b914d675b82bc4888f077 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Jan 17 08:25:45 2008 -0600 + + QE: Move FDT support into a common file + + Move the flat device tree setup for QE related devices into + a common file shared between 83xx & 85xx platforms that have QE's. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 37e3c62fa07a823e7569c872e3a9395d227ed8e3 +Author: Grzegorz Bernacki <gjb@semihalf.com> +Date: Mon Jan 28 10:15:02 2008 +0100 + + ADS5121e: DDR2 init/timing update. + + Signed-off-by: John Rigby <jrigby@freescale.com> + Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> + +commit ac9152830d7fdebace8a260b7737ef2870c21ca0 +Author: John Rigby <jrigby@freescale.com> +Date: Wed Jan 30 13:36:57 2008 -0700 + + Device tree updates + + Changes to match 5121 device tree going mainline in 2.6.25. + + Change OF_SOC from "soc5121" to plain "soc". + Remove unneeded "ref-frequency" fixups. + Remove "address" enetaddr fixup. + + Add bus-frequency fixup for old OF_SOC so old + kernels with old device trees will work with new + u-boot with 66MHz IPS clock + + Signed-off-by: John Rigby <jrigby@freescale.com> + +commit de55d18df3ff2ea614624e74793de7c43520e0e7 +Author: John Rigby <jrigby@freescale.com> +Date: Wed Jan 30 13:36:56 2008 -0700 + + Change IPS freq to 66MHz + + Recommended frequency is 66MHz + Change divider from 4 to 3. + + Signed-off-by: John Rigby <jrigby@freescale.com> + +commit cd9cb62f9d8b78d6c3af5d1e9b5a3d68a3d73974 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Mon Jan 14 22:38:55 2008 +0100 + + xsengine: rename board_post_init to board_late_init + + missing migration from "Cleanup of some init functions" + in c837dcb1a316745092567bfe4fb266d0941884ff + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 8dafa87476b0d7170e219c2f5e3842c833a91807 +Author: Larry Johnson <lrj@acm.org> +Date: Sat Jan 12 23:35:33 2008 -0500 + + Add attribute POST_PREREL to ECC memory POST + + Signed-off-by: Larry Johnson <lrj@acm.org> + +commit a93907c43f847f076dd0e34ee3b69b5e8e6d0d29 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Fri Jan 18 01:14:03 2008 +0100 + + TFTP: add host ip addr support + + allow to use a different server as set in serverip + add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length + if not defined the max length will be at 128 + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 7ec8bb15ee368ea54d48d64867767a704d9ab4c2 +Author: Wolfgang Denk <wd@denx.de> +Date: Thu Dec 27 10:56:54 2007 +0100 + + OMAP5912: fix FIFO handling in UART driver + + According to the OMAP5912 Serial Interfaces Reference Guide (see + http://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the + FIFO_EN enable bit in the FIFO Control Register (FCR) can only be + changed when the baud clock is not running, i. e. when both DLL and + DLH are set to 0. + + Thus make sure that DLL and DLH are 0 when writing the FCR. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 16158778b5f52f201e95ded2d2d9084b0ed5670d +Author: Harald Welte <laforge@openmoko.org> +Date: Wed Dec 19 15:10:52 2007 +0100 + + ARM: S3C24x0 SoC NAND controller support + + This patch adds NAND support to the S3C24x0 SoC code in u-boot + + Signed-off-by: Harald Welte <laforge@openmoko.org> + +commit a7c185ed3d9f8ebd85cfc286e1ffee72e4803163 +Author: Harald Welte <laforge@openmoko.org> +Date: Wed Dec 19 14:24:40 2007 +0100 + + ARM: s3c24xx: Multiple serial port support + + This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's + + Signed-off-by: Harald Welte <laforge@openmoko.org> + +commit a25f72f1f73a11de68251fb88c89991e202e68fa +Author: Harald Welte <laforge@openmoko.org> +Date: Wed Dec 19 14:16:57 2007 +0100 + + ARM: arm920t: Allow use of 'gd' pointer from IRQ + + This patch allows us to use the 'gd' pointer (and thus environment + and everything else associated with it) from interrupt context on + arm920t. + + Signed-off-by: Harald Welte <laforge@openmoko.org> + +commit be19bd5cd0f454b63298844a0b5377e029b2caad +Author: Harald Welte <laforge@openmoko.org> +Date: Wed Dec 19 14:19:38 2007 +0100 + + ARM: arm920/s3c24xx: IRQ demulitplexer callback + + This patch adds a IRQ demultiplexer callback to the arm920 cpu core code, + plus a stub implementation of it for the S3C2410. + + The purpose is to allow arm920t implementations such as the s3c24x0 to + implement interrupt handlers in u-boot without having to touch core + arm920t code. + + Signed-off-by: Harald Welte <laforge@openmoko.org> + +commit a41dbbd98d201d8aea31b5d21df4742c20cd7eda +Author: Hebbar <gururajakr@sanyo.co.in> +Date: Tue Dec 18 16:03:07 2007 -0800 + + ARM: Display Ethernet info in do_bdinfo only if CONFIG_CMD_NET is defined + + Add ifdef to bdinfo command to display ethernet information + only if CONFIG_CMD_NET is defined for arm modules. + + Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in> + +commit f7ad79b6f9f0f45437b62e19b45356cc2aaf4884 +Author: Hebbar <gururajakr@sanyo.co.in> +Date: Tue Dec 18 16:00:54 2007 -0800 + + ARM: add I2C init function call in lib_arm/board.c + + Adds I2C init func call to init sequence for ARM boards. This is + present in ppc,blackfin and other processor init sequence. + + Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in> + +commit 4fedfddf97461b88668b9aec774dfb7a0c6dc368 +Author: Ladislav Michl <ladis@linux-mips.org> +Date: Fri Dec 7 00:42:32 2007 +0100 + + ARM: Board voiceblue update + + Signed-off-by: Ladislav Michl <ladis@linux-mips.org> + +commit 2c5260f711168d5ee91c70ddbb7d897013eefc46 +Author: Ladislav Michl <ladis@linux-mips.org> +Date: Thu Dec 6 23:24:57 2007 +0100 + + ARM: AT91RM9200 based boards config cleanup + + Signed-off-by: Ladislav Michl <ladis@linux-mips.org> + + Remove nowhere used struct bd_info_ext, remove trailing whitespaces, fix + indentation. + +commit 481f28b1db5cd21deb55f69399ba240e107af4c7 +Author: Ladislav Michl <ladis@linux-mips.org> +Date: Thu Dec 6 22:59:16 2007 +0100 + + ARM: Fix at91rm9200dk base address + + Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was + renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced + with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT. + However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to + CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact. + I'm sending this patch 4th (!) time in hope it produces at least some + reaction. + + Signed-off-by: Ladislav Michl <ladis@linux-mips.org> + + Fix at91rm9200dk base and environment address. + +commit c95219fae2a7add7daa2f91aedca65b1698465c7 +Author: stefano babic <sbabic@denx.de> +Date: Tue Nov 20 10:40:24 2007 +0100 + + MMC for PXA 27X (resubmit) + + MMC support for X_Scale PXA is broken and does not work. + Mainly, the mmc_init() function cannot recognize current SD/MMC cards. + There were already some patches around the world but none of them was + merged into the official u-boot tree. + + This patch makes order fixing this issue. Resubmit after code cleanup. + + Applied and tested on PXA 270 (TrizepsIV module). + + Signed-off-by: Stefano Babic <sbabic@denx.de> + +commit 96bbfa1e6625ce23a150936863b3ecf4c853eb33 +Author: stefano babic <sbabic@denx.de> +Date: Tue Nov 20 10:37:04 2007 +0100 + + Fix gcc issues in pxa-regs.h + + Fix gcc4 issue. With some toolchain, a previous patch that fixes gcc4 + issues generates wrong code. + (Problem was reported with gcc-4.0.2-glibc-2.3.6/arm-softfloat-linux-gnu). + This patch fixes the problem and solves the gcc-4 issues as the linux + kernel does. + + Signed-off-by: Stefano Babic <sbabic@denx.de> + Signed-off-by: Dmitry Ivanov <ivadmitry@gmail.com> + +commit 7047b388876e7b905b2ec4edb8010543e3641b85 +Author: Jens Gehrlein <sew_s@tqs.de> +Date: Tue Jan 29 08:45:03 2008 +0100 + + TQM834x: enable DHCP + + Signed-off-by: Jens Gehrlein <sew_s@tqs.de> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit a877004d44ca7dbc1e618add3eeb1da7c84e4bec +Author: Jens Gehrlein <sew_s@tqs.de> +Date: Tue Jan 29 08:45:02 2008 +0100 + + TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 Bit). + + Signed-off-by: Jens Gehrlein <sew_s@tqs.de> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 8931ab176025b03cfc320b3fd1eca432a88ed560 +Author: Ben Warren <biggerbadderben@gmail.com> +Date: Sat Jan 26 23:41:19 2008 -0500 + + Fix conditional compilation of mpx8xxx_spi driver + + This driver should only compile if CONFIG_MPC8XXX_SPI is set + + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 63f732d3d3880feb531f48af247c025bf01462b0 +Author: Rafal Jaworowski <raj@semihalf.com> +Date: Tue Jan 29 17:00:34 2008 +0100 + + API: Provide dummy halt() in the glue layer. + + This fixes a demo app link failure on platforms configured with CONFIG_PANIC_HANG. + + Signed-off-by: Rafal Jaworowski <raj@semihalf.com> + +commit 0dc1fc22af86d16993388d9ed9630dbaa2d51826 +Author: Rafal Jaworowski <raj@semihalf.com> +Date: Tue Jan 29 16:57:38 2008 +0100 + + API: Convert conditional building to the new scheme. + + This fixes a build breakage with CONFIG_API enabled, which appeared after + the recent changes in the U-Boot build system. + + Signed-off-by: Rafal Jaworowski <raj@semihalf.com> + +commit 98b742489c09780be6a832eeaa4e5eff824792bb +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Jan 25 09:56:17 2008 +0100 + + inka4x0: remove dead code + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 33dac03b1b5d61e4fed7bad445ba40b4c97feba0 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Jan 23 14:41:37 2008 +0100 + + Coding Style Cleanup; update CHANGELOG + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit 865f0f9754b95183cad395de7e8cb85df0c6ea1f Author: Wolfgang Denk <wd@denx.de> Date: Wed Jan 23 14:31:17 2008 +0100 diff --git a/onenand_ipl/board/apollon/low_levelinit.S b/onenand_ipl/board/apollon/low_levelinit.S index 417a5a7..205170f 100644 --- a/onenand_ipl/board/apollon/low_levelinit.S +++ b/onenand_ipl/board/apollon/low_levelinit.S @@ -183,16 +183,16 @@ lowlevel_init: mov r2, #0x1800 1: subs r2, r2, #0x1 - bne 1b + bne 1b ldr sp, SRAM_STACK - str ip, [sp] /* stash old link register */ + str ip, [sp] /* stash old link register */ mov ip, lr /* save link reg across call */ - mov r0, r3 /* pass skip info to s_init */ + mov r0, r3 /* pass skip info to s_init */ - bl s_init /* go setup pll,mux,memory */ + bl s_init /* go setup pll,mux,memory */ - ldr ip, [sp] /* restore save ip */ + ldr ip, [sp] /* restore save ip */ mov lr, ip /* restore link reg */ /* back to arch calling code */ |