Patches by Murray Jensen, 17 Jun 2003:

- Hymod board database mods: add "who" field and new xilinx chip types
- provide new "init_cmd_timeout()" function so code external to
  "common/main.c" can use the "reset_cmd_timeout()" function before
  entering the main loop
- add DTT support for adm1021 (new file dtt/adm1021.c; config
  slightly different. see include/configs/hymod.h for an example
  (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
  CFG_DTT_ADM1021 defined)
- add new "eeprom_probe()" function which has similar args and
  behaves in a similar way to "eeprom_read()" etc.
- add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
  function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
- gdbtools copyright update
- ensure that set_msr() executes the "sync" and "isync" instructions
  after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
- 8260 I/O ports fix: Open Drain should be set last when configuring
- add SIU IRQ defines for 8260
- allow LDSCRIPT override and OBJCFLAGS initialization: change to
  config.mk to allow board configurations to override the GNU
  linker script, selected via the LDSCRIPT, make variable, and to
  give an initial value to the OBJCFLAGS make variable
- 8260 i2c enhancement:
  o correctly extends the timeout depending on the size of all
    queued messages for both transmit and receive
  o will not continue with receive if transmit times out
  o ensures that the error callback is done for all queued tx
    and rx messages
  o correctly detects both tx and rx timeouts, only delivers one to
    the callback, and does not overwrite an earlier error
  o logic in i2c_probe now correct
- add "vprintf()" function so that "panic()" function can be
  technically correct
- many Hymod board changes

1 files changed, 9 insertions, 3 deletions

diff --git a/tools/bddb/defs.php b/tools/bddb/defs.php
index 0393dbd..9361419 100644
--- a/tools/bddb/defs.php
+++ b/tools/bddb/defs.php
@@ -58,8 +58,8 @@
 	$zbt_nbits = array(0,19,20,21,22);
 
 	// Xilinx attributes
-	$xlxtyp_vals = array('','XCV300E','XCV400E','XCV600E');
-	$xlxspd_vals = array('','6','7','8');
+	$xlxtyp_vals = array('','XCV300E','XCV400E','XCV600E','XC2V2000','XC2V3000','XC2V4000','XC2V6000');
+	$xlxspd_vals = array('','6','7','8','4','5');
 	$xlxtmp_vals = array('','COM','IND');
 	$xlxgrd_vals = array('','NORMAL','ENGSAMP');
 
@@ -449,7 +449,13 @@
 	// generate a (possibly not unique) random vendor ethernet address
 	// (setting bit 6 in the ethernet address - motorola wise i.e. bit 0
 	// is the most significant bit - means it is not an assigned ethernet
-	// address). Also, make sure it is NOT a multicast ethernet address.
+	// address - it is a "locally administered" address). Also, make sure
+	// it is NOT a multicast ethernet address (by setting bit 7 to 0).
+	// e.g. the first byte of all ethernet addresses generated here will
+	// have 2 in the bottom two bits (incidentally, these are the first
+	// two bits transmitted on the wire, since the octets in ethernet
+	// addresses are transmitted LSB first).
+
 	function gen_eth_addr($serno) {
 
 		$ethaddr_high = (mt_rand(0, 65535) & 0xfeff) | 0x0200;