mpc8xx: remove stale "lwmon" files

Commit acc2372d "mpc8xx: remove lwmon board support" removed support
for the MPC823 based "lwmon" board, but left some board specific POST
files.  This patch cleans up and removes the now unused files.

Signed-off-by: Wolfgang Denk <wd@denx.de>

2 files changed, 0 insertions, 305 deletions

diff --git a/post/board/lwmon/Makefile b/post/board/lwmon/Makefile
deleted file mode 100644
index 7f6d5a0..0000000
--- a/post/board/lwmon/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2002-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y += sysmon.o
diff --git a/post/board/lwmon/sysmon.c b/post/board/lwmon/sysmon.c
deleted file mode 100644
index f521b27..0000000
--- a/post/board/lwmon/sysmon.c
+++ /dev/null
@@ -1,297 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <post.h>
-#include <common.h>
-
-/*
- * SYSMON test
- *
- * This test performs the system hardware monitoring.
- * The test passes when all the following voltages and temperatures
- * are within allowed ranges:
- *
- * Board temperature
- * Front temperature
- * +3.3V CPU logic
- * +5V logic
- * +12V PCMCIA
- * +12V CCFL
- * +5V standby
- *
- * CCFL is not enabled if temperature values are not within allowed ranges
- *
- * See the list off all parameters in the sysmon_table below
- */
-
-#include <post.h>
-#include <watchdog.h>
-#include <i2c.h>
-
-#if CONFIG_POST & CONFIG_SYS_POST_SYSMON
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static int sysmon_temp_invalid = 0;
-
-/* #define DEBUG */
-
-typedef struct sysmon_s sysmon_t;
-typedef struct sysmon_table_s sysmon_table_t;
-
-static void sysmon_lm87_init (sysmon_t * this);
-static void sysmon_pic_init (sysmon_t * this);
-static uint sysmon_i2c_read (sysmon_t * this, uint addr);
-static uint sysmon_i2c_read_sgn (sysmon_t * this, uint addr);
-static void sysmon_ccfl_disable (sysmon_table_t * this);
-static void sysmon_ccfl_enable (sysmon_table_t * this);
-
-struct sysmon_s
-{
-	uchar	chip;
-	void	(*init)(sysmon_t *);
-	uint	(*read)(sysmon_t *, uint);
-};
-
-static sysmon_t sysmon_lm87 =
-	{CONFIG_SYS_I2C_SYSMON_ADDR, sysmon_lm87_init, sysmon_i2c_read};
-static sysmon_t sysmon_lm87_sgn =
-	{CONFIG_SYS_I2C_SYSMON_ADDR, sysmon_lm87_init, sysmon_i2c_read_sgn};
-static sysmon_t sysmon_pic =
-	{CONFIG_SYS_I2C_PICIO_ADDR, sysmon_pic_init, sysmon_i2c_read};
-
-static sysmon_t * sysmon_list[] =
-{
-	&sysmon_lm87,
-	&sysmon_lm87_sgn,
-	&sysmon_pic,
-	NULL
-};
-
-struct sysmon_table_s
-{
-	char *		name;
-	char *		unit_name;
-	sysmon_t *	sysmon;
-	void		(*exec_before)(sysmon_table_t *);
-	void		(*exec_after)(sysmon_table_t *);
-
-	int		unit_precision;
-	int		unit_div;
-	int		unit_min;
-	int		unit_max;
-	uint		val_mask;
-	uint		val_min;
-	uint		val_max;
-	int		val_valid;
-	uint		val_min_alt;
-	uint		val_max_alt;
-	int		val_valid_alt;
-	uint		addr;
-};
-
-static sysmon_table_t sysmon_table[] =
-{
-    {"Board temperature", " C", &sysmon_lm87_sgn, NULL, sysmon_ccfl_disable,
-     1, 1, -128, 127, 0xFF, 0x58, 0xD5, 0, 0x6C, 0xC6, 0, 0x27},
-
-    {"Front temperature", " C", &sysmon_lm87, NULL, sysmon_ccfl_disable,
-     1, 100, -27316, 8984, 0xFF, 0xA4, 0xFC, 0, 0xB2, 0xF1, 0, 0x29},
-
-    {"+3.3V CPU logic", "V", &sysmon_lm87, NULL, NULL,
-     100, 1000, 0, 4386, 0xFF, 0xB6, 0xC9, 0, 0xB6, 0xC9, 0, 0x22},
-
-    {"+ 5 V logic", "V", &sysmon_lm87, NULL, NULL,
-     100, 1000, 0, 6630, 0xFF, 0xB6, 0xCA, 0, 0xB6, 0xCA, 0, 0x23},
-
-    {"+12 V PCMCIA", "V", &sysmon_lm87, NULL, NULL,
-     100, 1000, 0, 15460, 0xFF, 0xBC, 0xD0, 0, 0xBC, 0xD0, 0, 0x21},
-
-    {"+12 V CCFL", "V", &sysmon_lm87, NULL, sysmon_ccfl_enable,
-     100, 1000, 0, 15900, 0xFF, 0xB6, 0xCA, 0, 0xB6, 0xCA, 0, 0x24},
-
-    {"+ 5 V standby", "V", &sysmon_pic, NULL, NULL,
-     100, 1000, 0, 6040, 0xFF, 0xC8, 0xDE, 0, 0xC8, 0xDE, 0, 0x7C},
-};
-static int sysmon_table_size = ARRAY_SIZE(sysmon_table);
-
-static int conversion_done = 0;
-
-
-int sysmon_init_f (void)
-{
-	sysmon_t ** l;
-	ulong reg;
-
-	/* Power on CCFL, PCMCIA */
-	reg = pic_read  (0x60);
-	reg |= 0x09;
-	pic_write (0x60, reg);
-
-	for (l = sysmon_list; *l; l++) {
-		(*l)->init(*l);
-	}
-
-	return 0;
-}
-
-void sysmon_reloc (void)
-{
-	/* Do nothing for now, sysmon_reloc() is required by the sysmon post */
-}
-
-static char *sysmon_unit_value (sysmon_table_t *s, uint val)
-{
-	static char buf[32];
-	int unit_val =
-	    s->unit_min + (s->unit_max - s->unit_min) * val / s->val_mask;
-	char *p, sign;
-	int dec, frac;
-
-	if (val == -1) {
-		return "I/O ERROR";
-	}
-
-	if (unit_val < 0) {
-		sign = '-';
-		unit_val = -unit_val;
-	} else {
-		sign = '+';
-	}
-
-	p = buf + sprintf(buf, "%c%2d", sign, unit_val / s->unit_div);
-
-
-	frac = unit_val % s->unit_div;
-
-	frac /= (s->unit_div / s->unit_precision);
-
-	dec = s->unit_precision;
-
-	if (dec != 1) {
-		*p++ = '.';
-	}
-	for (dec /= 10; dec != 0; dec /= 10) {
-		*p++ = '0' + (frac / dec) % 10;
-	}
-	strcpy(p, s->unit_name);
-
-	return buf;
-}
-
-static void sysmon_lm87_init (sysmon_t * this)
-{
-	uchar val;
-
-	/* Detect LM87 chip */
-	if (i2c_read(this->chip, 0x40, 1, &val, 1) || (val & 0x80) != 0 ||
-	    i2c_read(this->chip, 0x3E, 1, &val, 1) || val != 0x02) {
-		printf("Error: LM87 not found at 0x%02X\n", this->chip);
-		return;
-	}
-
-	/* Configure pins 5,6 as AIN */
-	val = 0x03;
-	if (i2c_write(this->chip, 0x16, 1, &val, 1)) {
-		printf("Error: can't write LM87 config register\n");
-		return;
-	}
-
-	/* Start monitoring */
-	val = 0x01;
-	if (i2c_write(this->chip, 0x40, 1, &val, 1)) {
-		printf("Error: can't write LM87 config register\n");
-		return;
-	}
-}
-
-static void sysmon_pic_init (sysmon_t * this)
-{
-}
-
-static uint sysmon_i2c_read (sysmon_t * this, uint addr)
-{
-	uchar val;
-	uint res = i2c_read(this->chip, addr, 1, &val, 1);
-
-	return res == 0 ? val : -1;
-}
-
-static uint sysmon_i2c_read_sgn (sysmon_t * this, uint addr)
-{
-	uchar val;
-	return i2c_read(this->chip, addr, 1, &val, 1) == 0 ?
-		128 + (signed char)val : -1;
-}
-
-static void sysmon_ccfl_disable (sysmon_table_t * this)
-{
-	if (!this->val_valid_alt) {
-		sysmon_temp_invalid = 1;
-	}
-}
-
-static void sysmon_ccfl_enable (sysmon_table_t * this)
-{
-	ulong reg;
-
-	if (!sysmon_temp_invalid) {
-		reg = pic_read  (0x60);
-		reg |= 0x06;
-		pic_write (0x60, reg);
-	}
-}
-
-int sysmon_post_test (int flags)
-{
-	int res = 0;
-	sysmon_table_t * t;
-	uint val;
-
-	/*
-	 * The A/D conversion on the LM87 sensor takes 300 ms.
-	 */
-	if (! conversion_done) {
-		while (post_time_ms(gd->post_init_f_time) < 300) WATCHDOG_RESET ();
-		conversion_done = 1;
-	}
-
-	for (t = sysmon_table; t < sysmon_table + sysmon_table_size; t ++) {
-		if (t->exec_before) {
-			t->exec_before(t);
-		}
-
-		val = t->sysmon->read(t->sysmon, t->addr);
-		if (val != -1) {
-			t->val_valid = val >= t->val_min && val <= t->val_max;
-			t->val_valid_alt = val >= t->val_min_alt && val <= t->val_max_alt;
-		} else {
-			t->val_valid = 0;
-			t->val_valid_alt = 0;
-		}
-
-		if (t->exec_after) {
-			t->exec_after(t);
-		}
-
-		if ((!t->val_valid) || (flags & POST_MANUAL)) {
-			printf("%-17s = %-10s ", t->name, sysmon_unit_value(t, val));
-			printf("allowed range");
-			printf(" %-8s ..", sysmon_unit_value(t, t->val_min));
-			printf(" %-8s", sysmon_unit_value(t, t->val_max));
-			printf("     %s\n", t->val_valid ? "OK" : "FAIL");
-		}
-
-		if (!t->val_valid) {
-			res = -1;
-		}
-	}
-
-	return res;
-}
-
-#endif /* CONFIG_POST & CONFIG_SYS_POST_SYSMON */