net: Move driver-model code into its own file

Every other uclass is in its own file. Create a new eth-uclass.c file and
move the driver-model code into it, so that networking is consistent.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

1 files changed, 549 insertions, 0 deletions

diff --git a/net/eth-uclass.c b/net/eth-uclass.c
new file mode 100644
index 0000000..a356a08
--- /dev/null
+++ b/net/eth-uclass.c
@@ -0,0 +1,549 @@
+/*
+ * (C) Copyright 2001-2015
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * Joe Hershberger, National Instruments
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <environment.h>
+#include <net.h>
+#include <dm/device-internal.h>
+#include <dm/uclass-internal.h>
+#include "eth_internal.h"
+
+/**
+ * struct eth_device_priv - private structure for each Ethernet device
+ *
+ * @state: The state of the Ethernet MAC driver (defined by enum eth_state_t)
+ */
+struct eth_device_priv {
+	enum eth_state_t state;
+};
+
+/**
+ * struct eth_uclass_priv - The structure attached to the uclass itself
+ *
+ * @current: The Ethernet device that the network functions are using
+ */
+struct eth_uclass_priv {
+	struct udevice *current;
+};
+
+/* eth_errno - This stores the most recent failure code from DM functions */
+static int eth_errno;
+
+static struct eth_uclass_priv *eth_get_uclass_priv(void)
+{
+	struct uclass *uc;
+
+	uclass_get(UCLASS_ETH, &uc);
+	assert(uc);
+	return uc->priv;
+}
+
+void eth_set_current_to_next(void)
+{
+	struct eth_uclass_priv *uc_priv;
+
+	uc_priv = eth_get_uclass_priv();
+	if (uc_priv->current)
+		uclass_next_device(&uc_priv->current);
+	if (!uc_priv->current)
+		uclass_first_device(UCLASS_ETH, &uc_priv->current);
+}
+
+/*
+ * Typically this will simply return the active device.
+ * In the case where the most recent active device was unset, this will attempt
+ * to return the first device. If that device doesn't exist or fails to probe,
+ * this function will return NULL.
+ */
+struct udevice *eth_get_dev(void)
+{
+	struct eth_uclass_priv *uc_priv;
+
+	uc_priv = eth_get_uclass_priv();
+	if (!uc_priv->current)
+		eth_errno = uclass_first_device(UCLASS_ETH,
+				    &uc_priv->current);
+	return uc_priv->current;
+}
+
+/*
+ * Typically this will just store a device pointer.
+ * In case it was not probed, we will attempt to do so.
+ * dev may be NULL to unset the active device.
+ */
+void eth_set_dev(struct udevice *dev)
+{
+	if (dev && !device_active(dev)) {
+		eth_errno = device_probe(dev);
+		if (eth_errno)
+			dev = NULL;
+	}
+
+	eth_get_uclass_priv()->current = dev;
+}
+
+/*
+ * Find the udevice that either has the name passed in as devname or has an
+ * alias named devname.
+ */
+struct udevice *eth_get_dev_by_name(const char *devname)
+{
+	int seq = -1;
+	char *endp = NULL;
+	const char *startp = NULL;
+	struct udevice *it;
+	struct uclass *uc;
+	int len = strlen("eth");
+
+	/* Must be longer than 3 to be an alias */
+	if (!strncmp(devname, "eth", len) && strlen(devname) > len) {
+		startp = devname + len;
+		seq = simple_strtoul(startp, &endp, 10);
+	}
+
+	uclass_get(UCLASS_ETH, &uc);
+	uclass_foreach_dev(it, uc) {
+		/*
+		 * We need the seq to be valid, so try to probe it.
+		 * If the probe fails, the seq will not match since it will be
+		 * -1 instead of what we are looking for.
+		 * We don't care about errors from probe here. Either they won't
+		 * match an alias or it will match a literal name and we'll pick
+		 * up the error when we try to probe again in eth_set_dev().
+		 */
+		if (device_probe(it))
+			continue;
+		/* Check for the name or the sequence number to match */
+		if (strcmp(it->name, devname) == 0 ||
+		    (endp > startp && it->seq == seq))
+			return it;
+	}
+
+	return NULL;
+}
+
+unsigned char *eth_get_ethaddr(void)
+{
+	struct eth_pdata *pdata;
+
+	if (eth_get_dev()) {
+		pdata = eth_get_dev()->platdata;
+		return pdata->enetaddr;
+	}
+
+	return NULL;
+}
+
+/* Set active state without calling start on the driver */
+int eth_init_state_only(void)
+{
+	struct udevice *current;
+	struct eth_device_priv *priv;
+
+	current = eth_get_dev();
+	if (!current || !device_active(current))
+		return -EINVAL;
+
+	priv = current->uclass_priv;
+	priv->state = ETH_STATE_ACTIVE;
+
+	return 0;
+}
+
+/* Set passive state without calling stop on the driver */
+void eth_halt_state_only(void)
+{
+	struct udevice *current;
+	struct eth_device_priv *priv;
+
+	current = eth_get_dev();
+	if (!current || !device_active(current))
+		return;
+
+	priv = current->uclass_priv;
+	priv->state = ETH_STATE_PASSIVE;
+}
+
+int eth_get_dev_index(void)
+{
+	if (eth_get_dev())
+		return eth_get_dev()->seq;
+	return -1;
+}
+
+static int eth_write_hwaddr(struct udevice *dev)
+{
+	struct eth_pdata *pdata = dev->platdata;
+	int ret = 0;
+
+	if (!dev || !device_active(dev))
+		return -EINVAL;
+
+	/* seq is valid since the device is active */
+	if (eth_get_ops(dev)->write_hwaddr && !eth_mac_skip(dev->seq)) {
+		if (!is_valid_ethaddr(pdata->enetaddr)) {
+			printf("\nError: %s address %pM illegal value\n",
+			       dev->name, pdata->enetaddr);
+			return -EINVAL;
+		}
+
+		/*
+		 * Drivers are allowed to decide not to implement this at
+		 * run-time. E.g. Some devices may use it and some may not.
+		 */
+		ret = eth_get_ops(dev)->write_hwaddr(dev);
+		if (ret == -ENOSYS)
+			ret = 0;
+		if (ret)
+			printf("\nWarning: %s failed to set MAC address\n",
+			       dev->name);
+	}
+
+	return ret;
+}
+
+static int on_ethaddr(const char *name, const char *value, enum env_op op,
+	int flags)
+{
+	int index;
+	int retval;
+	struct udevice *dev;
+
+	/* look for an index after "eth" */
+	index = simple_strtoul(name + 3, NULL, 10);
+
+	retval = uclass_find_device_by_seq(UCLASS_ETH, index, false, &dev);
+	if (!retval) {
+		struct eth_pdata *pdata = dev->platdata;
+		switch (op) {
+		case env_op_create:
+		case env_op_overwrite:
+			eth_parse_enetaddr(value, pdata->enetaddr);
+			break;
+		case env_op_delete:
+			memset(pdata->enetaddr, 0, 6);
+		}
+	}
+
+	return 0;
+}
+U_BOOT_ENV_CALLBACK(ethaddr, on_ethaddr);
+
+int eth_init(void)
+{
+	char *ethact = getenv("ethact");
+	char *ethrotate = getenv("ethrotate");
+	struct udevice *current = NULL;
+	struct udevice *old_current;
+	int ret = -ENODEV;
+
+	/*
+	 * When 'ethrotate' variable is set to 'no' and 'ethact' variable
+	 * is already set to an ethernet device, we should stick to 'ethact'.
+	 */
+	if ((ethrotate != NULL) && (strcmp(ethrotate, "no") == 0)) {
+		if (ethact) {
+			current = eth_get_dev_by_name(ethact);
+			if (!current)
+				return -EINVAL;
+		}
+	}
+
+	if (!current) {
+		current = eth_get_dev();
+		if (!current) {
+			printf("No ethernet found.\n");
+			return -ENODEV;
+		}
+	}
+
+	old_current = current;
+	do {
+		if (current) {
+			debug("Trying %s\n", current->name);
+
+			if (device_active(current)) {
+				ret = eth_get_ops(current)->start(current);
+				if (ret >= 0) {
+					struct eth_device_priv *priv =
+						current->uclass_priv;
+
+					priv->state = ETH_STATE_ACTIVE;
+					return 0;
+				}
+			} else {
+				ret = eth_errno;
+			}
+
+			debug("FAIL\n");
+		} else {
+			debug("PROBE FAIL\n");
+		}
+
+		/*
+		 * If ethrotate is enabled, this will change "current",
+		 * otherwise we will drop out of this while loop immediately
+		 */
+		eth_try_another(0);
+		/* This will ensure the new "current" attempted to probe */
+		current = eth_get_dev();
+	} while (old_current != current);
+
+	return ret;
+}
+
+void eth_halt(void)
+{
+	struct udevice *current;
+	struct eth_device_priv *priv;
+
+	current = eth_get_dev();
+	if (!current || !device_active(current))
+		return;
+
+	eth_get_ops(current)->stop(current);
+	priv = current->uclass_priv;
+	priv->state = ETH_STATE_PASSIVE;
+}
+
+int eth_is_active(struct udevice *dev)
+{
+	struct eth_device_priv *priv;
+
+	if (!dev || !device_active(dev))
+		return 0;
+
+	priv = dev_get_uclass_priv(dev);
+	return priv->state == ETH_STATE_ACTIVE;
+}
+
+int eth_send(void *packet, int length)
+{
+	struct udevice *current;
+	int ret;
+
+	current = eth_get_dev();
+	if (!current)
+		return -ENODEV;
+
+	if (!device_active(current))
+		return -EINVAL;
+
+	ret = eth_get_ops(current)->send(current, packet, length);
+	if (ret < 0) {
+		/* We cannot completely return the error at present */
+		debug("%s: send() returned error %d\n", __func__, ret);
+	}
+	return ret;
+}
+
+int eth_rx(void)
+{
+	struct udevice *current;
+	uchar *packet;
+	int flags;
+	int ret;
+	int i;
+
+	current = eth_get_dev();
+	if (!current)
+		return -ENODEV;
+
+	if (!device_active(current))
+		return -EINVAL;
+
+	/* Process up to 32 packets at one time */
+	flags = ETH_RECV_CHECK_DEVICE;
+	for (i = 0; i < 32; i++) {
+		ret = eth_get_ops(current)->recv(current, flags, &packet);
+		flags = 0;
+		if (ret > 0)
+			net_process_received_packet(packet, ret);
+		if (ret >= 0 && eth_get_ops(current)->free_pkt)
+			eth_get_ops(current)->free_pkt(current, packet, ret);
+		if (ret <= 0)
+			break;
+	}
+	if (ret == -EAGAIN)
+		ret = 0;
+	if (ret < 0) {
+		/* We cannot completely return the error at present */
+		debug("%s: recv() returned error %d\n", __func__, ret);
+	}
+	return ret;
+}
+
+int eth_initialize(void)
+{
+	int num_devices = 0;
+	struct udevice *dev;
+
+	eth_common_init();
+
+	/*
+	 * Devices need to write the hwaddr even if not started so that Linux
+	 * will have access to the hwaddr that u-boot stored for the device.
+	 * This is accomplished by attempting to probe each device and calling
+	 * their write_hwaddr() operation.
+	 */
+	uclass_first_device(UCLASS_ETH, &dev);
+	if (!dev) {
+		printf("No ethernet found.\n");
+		bootstage_error(BOOTSTAGE_ID_NET_ETH_START);
+	} else {
+		char *ethprime = getenv("ethprime");
+		struct udevice *prime_dev = NULL;
+
+		if (ethprime)
+			prime_dev = eth_get_dev_by_name(ethprime);
+		if (prime_dev) {
+			eth_set_dev(prime_dev);
+			eth_current_changed();
+		} else {
+			eth_set_dev(NULL);
+		}
+
+		bootstage_mark(BOOTSTAGE_ID_NET_ETH_INIT);
+		do {
+			if (num_devices)
+				printf(", ");
+
+			printf("eth%d: %s", dev->seq, dev->name);
+
+			if (ethprime && dev == prime_dev)
+				printf(" [PRIME]");
+
+			eth_write_hwaddr(dev);
+
+			uclass_next_device(&dev);
+			num_devices++;
+		} while (dev);
+
+		putc('\n');
+	}
+
+	return num_devices;
+}
+
+static int eth_post_bind(struct udevice *dev)
+{
+	if (strchr(dev->name, ' ')) {
+		printf("\nError: eth device name \"%s\" has a space!\n",
+		       dev->name);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int eth_pre_unbind(struct udevice *dev)
+{
+	/* Don't hang onto a pointer that is going away */
+	if (dev == eth_get_uclass_priv()->current)
+		eth_set_dev(NULL);
+
+	return 0;
+}
+
+static int eth_post_probe(struct udevice *dev)
+{
+	struct eth_device_priv *priv = dev->uclass_priv;
+	struct eth_pdata *pdata = dev->platdata;
+	unsigned char env_enetaddr[6];
+
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
+	struct eth_ops *ops = eth_get_ops(dev);
+	static int reloc_done;
+
+	if (!reloc_done) {
+		if (ops->start)
+			ops->start += gd->reloc_off;
+		if (ops->send)
+			ops->send += gd->reloc_off;
+		if (ops->recv)
+			ops->recv += gd->reloc_off;
+		if (ops->free_pkt)
+			ops->free_pkt += gd->reloc_off;
+		if (ops->stop)
+			ops->stop += gd->reloc_off;
+#ifdef CONFIG_MCAST_TFTP
+		if (ops->mcast)
+			ops->mcast += gd->reloc_off;
+#endif
+		if (ops->write_hwaddr)
+			ops->write_hwaddr += gd->reloc_off;
+		if (ops->read_rom_hwaddr)
+			ops->read_rom_hwaddr += gd->reloc_off;
+
+		reloc_done++;
+	}
+#endif
+
+	priv->state = ETH_STATE_INIT;
+
+	/* Check if the device has a MAC address in ROM */
+	if (eth_get_ops(dev)->read_rom_hwaddr)
+		eth_get_ops(dev)->read_rom_hwaddr(dev);
+
+	eth_getenv_enetaddr_by_index("eth", dev->seq, env_enetaddr);
+	if (!is_zero_ethaddr(env_enetaddr)) {
+		if (!is_zero_ethaddr(pdata->enetaddr) &&
+		    memcmp(pdata->enetaddr, env_enetaddr, 6)) {
+			printf("\nWarning: %s MAC addresses don't match:\n",
+			       dev->name);
+			printf("Address in SROM is         %pM\n",
+			       pdata->enetaddr);
+			printf("Address in environment is  %pM\n",
+			       env_enetaddr);
+		}
+
+		/* Override the ROM MAC address */
+		memcpy(pdata->enetaddr, env_enetaddr, 6);
+	} else if (is_valid_ethaddr(pdata->enetaddr)) {
+		eth_setenv_enetaddr_by_index("eth", dev->seq, pdata->enetaddr);
+		printf("\nWarning: %s using MAC address from ROM\n",
+		       dev->name);
+	} else if (is_zero_ethaddr(pdata->enetaddr)) {
+#ifdef CONFIG_NET_RANDOM_ETHADDR
+		net_random_ethaddr(pdata->enetaddr);
+		printf("\nWarning: %s (eth%d) using random MAC address - %pM\n",
+		       dev->name, dev->seq, pdata->enetaddr);
+#else
+		printf("\nError: %s address not set.\n",
+		       dev->name);
+		return -EINVAL;
+#endif
+	}
+
+	return 0;
+}
+
+static int eth_pre_remove(struct udevice *dev)
+{
+	struct eth_pdata *pdata = dev->platdata;
+
+	eth_get_ops(dev)->stop(dev);
+
+	/* clear the MAC address */
+	memset(pdata->enetaddr, 0, 6);
+
+	return 0;
+}
+
+UCLASS_DRIVER(eth) = {
+	.name		= "eth",
+	.id		= UCLASS_ETH,
+	.post_bind	= eth_post_bind,
+	.pre_unbind	= eth_pre_unbind,
+	.post_probe	= eth_post_probe,
+	.pre_remove	= eth_pre_remove,
+	.priv_auto_alloc_size = sizeof(struct eth_uclass_priv),
+	.per_device_auto_alloc_size = sizeof(struct eth_device_priv),
+	.flags		= DM_UC_FLAG_SEQ_ALIAS,
+};