summaryrefslogtreecommitdiff
path: root/nand_spl
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2008-04-08 10:31:00 +0200
committerStefan Roese <sr@denx.de>2008-04-18 16:12:46 +0200
commit46f373838e384a4c23d13581b1dfa5acb66b5810 (patch)
tree904a905dfbe62dbb9ad6a4bf1ad9589265c75268 /nand_spl
parent5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04 (diff)
downloadu-boot-imx-46f373838e384a4c23d13581b1dfa5acb66b5810.zip
u-boot-imx-46f373838e384a4c23d13581b1dfa5acb66b5810.tar.gz
u-boot-imx-46f373838e384a4c23d13581b1dfa5acb66b5810.tar.bz2
nand_spl: Update nand_spl to support 2k page size NAND devices
This patch adds support for booting from 2k page sized NAND device (e.g. Micron 29F2G08AAC). Tested on AMCC Canyonlands. Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'nand_spl')
-rw-r--r--nand_spl/nand_boot.c64
1 files changed, 63 insertions, 1 deletions
diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c
index e2147cb..bc57725 100644
--- a/nand_spl/nand_boot.c
+++ b/nand_spl/nand_boot.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2006-2007
+ * (C) Copyright 2006-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* This program is free software; you can redistribute it and/or
@@ -28,6 +28,10 @@ static int nand_ecc_pos[] = CFG_NAND_ECCPOS;
extern void board_nand_init(struct nand_chip *nand);
+#if (CFG_NAND_PAGE_SIZE <= 512)
+/*
+ * NAND command for small page NAND devices (512)
+ */
static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8 cmd)
{
struct nand_chip *this = mtd->priv;
@@ -65,6 +69,64 @@ static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8
return 0;
}
+#else
+/*
+ * NAND command for large page NAND devices (2k)
+ */
+static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8 cmd)
+{
+ struct nand_chip *this = mtd->priv;
+ int page_offs = offs;
+ int page_addr = page + block * CFG_NAND_PAGE_COUNT;
+
+ if (this->dev_ready)
+ this->dev_ready(mtd);
+ else
+ CFG_NAND_READ_DELAY;
+
+ /* Emulate NAND_CMD_READOOB */
+ if (cmd == NAND_CMD_READOOB) {
+ page_offs += CFG_NAND_PAGE_SIZE;
+ cmd = NAND_CMD_READ0;
+ }
+
+ /* Begin command latch cycle */
+ this->hwcontrol(mtd, NAND_CTL_SETCLE);
+ this->write_byte(mtd, cmd);
+ /* Set ALE and clear CLE to start address cycle */
+ this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+ this->hwcontrol(mtd, NAND_CTL_SETALE);
+ /* Column address */
+ this->write_byte(mtd, page_offs & 0xff); /* A[7:0] */
+ this->write_byte(mtd, (uchar)((page_offs >> 8) & 0xff)); /* A[11:9] */
+ /* Row address */
+ this->write_byte(mtd, (uchar)(page_addr & 0xff)); /* A[19:12] */
+ this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff)); /* A[27:20] */
+#ifdef CFG_NAND_5_ADDR_CYCLE
+ /* One more address cycle for devices > 128MiB */
+ this->write_byte(mtd, (uchar)((page_addr >> 16) & 0x0f)); /* A[xx:28] */
+#endif
+ /* Latch in address */
+ this->hwcontrol(mtd, NAND_CTL_CLRALE);
+
+ /* Begin command latch cycle */
+ this->hwcontrol(mtd, NAND_CTL_SETCLE);
+ /* Write out the start read command */
+ this->write_byte(mtd, NAND_CMD_READSTART);
+ /* End command latch cycle */
+ this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+
+ /*
+ * Wait a while for the data to be ready
+ */
+ if (this->dev_ready)
+ this->dev_ready(mtd);
+ else
+ CFG_NAND_READ_DELAY;
+
+ return 0;
+}
+#endif
static int nand_is_bad_block(struct mtd_info *mtd, int block)
{