diff options
| author | Haiying Wang <haiying.wang@freescale.com> | 2006-07-12 10:48:05 -0400 |
|---|---|---|
| committer | Jon Loeliger <jdl@freescale.com> | 2006-07-13 10:57:37 -0500 |
| commit | bea3f28d285942bf3f7ab339ce85178ded544225 (patch) | |
| tree | eb3ef76fa25a4dcd89d09dbbaa7f7772fa4e662f /lib_ppc | |
| parent | fcb28e763415e0e4e66b0f45842d1557ae198e5e (diff) | |
| download | u-boot-imx-bea3f28d285942bf3f7ab339ce85178ded544225.zip u-boot-imx-bea3f28d285942bf3f7ab339ce85178ded544225.tar.gz u-boot-imx-bea3f28d285942bf3f7ab339ce85178ded544225.tar.bz2 | |
Add support for reading and writing mac addresses to or from ID EEPROM.
Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
With attached patch, we can use command "mac/mac read/mac save/"
to read and write EEPROM under u-boot prompt.
U-boot will calculate the checksum of EEPROM while bootup,
if it is right, then u-boot will check whether the mac address
of eTSEC0/1/2/3 is availalbe (non-zero).
If there is mac address availabe in EEPROM, u-boot will use it,
otherewise, u-boot will use the mac address defined in
MPC8641HPCN.h. This matches the requirement to set unique mac address
for each TSEC port.
Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
Diffstat (limited to 'lib_ppc')
| -rw-r--r-- | lib_ppc/board.c | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/lib_ppc/board.c b/lib_ppc/board.c index c367b3e..2c29f46 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -862,6 +862,10 @@ void board_init_r (gd_t *id, ulong dest_addr) } #endif +#ifdef CFG_ID_EEPROM + mac_read_from_eeprom(); +#endif + #if defined(CONFIG_TQM8xxL) || defined(CONFIG_TQM8260) || \ defined(CONFIG_CCM) || defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X) load_sernum_ethaddr (); |