Move lib_$ARCH directories to arch/$ARCH/lib

Also move lib_$ARCH/config.mk to arch/$ARCH/config.mk

This change is intended to clean up the top-level directory structure
and more closely mimic Linux's directory organization.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

22 files changed, 0 insertions, 3472 deletions

diff --git a/lib_blackfin/.gitignore b/lib_blackfin/.gitignore
deleted file mode 100644
index 09f1be0..0000000
--- a/lib_blackfin/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-u-boot.lds
diff --git a/lib_blackfin/Makefile b/lib_blackfin/Makefile
deleted file mode 100644
index 3bdba75..0000000
--- a/lib_blackfin/Makefile
+++ /dev/null
@@ -1,65 +0,0 @@
-#
-# U-boot Makefile
-#
-# Copyright (c) 2005-2008 Analog Devices Inc.
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
-# MA 02110-1301 USA
-#
-
-include $(TOPDIR)/config.mk
-
-CFLAGS += -DBFIN_BOARD_NAME='"$(BOARD)"'
-
-LIB	= $(obj)lib$(ARCH).a
-
-SOBJS-y	+= ins.o
-SOBJS-y	+= memcmp.o
-SOBJS-y	+= memcpy.o
-SOBJS-y	+= memmove.o
-SOBJS-y	+= memset.o
-SOBJS-y	+= outs.o
-SOBJS-$(CONFIG_CMD_KGDB) += __kgdb.o
-
-COBJS-y	+= board.o
-COBJS-y	+= boot.o
-COBJS-y	+= cache.o
-COBJS-y	+= clocks.o
-COBJS-$(CONFIG_CMD_CACHE_DUMP) += cmd_cache_dump.o
-COBJS-$(CONFIG_CMD_KGDB) += kgdb.o
-COBJS-y	+= muldi3.o
-COBJS-$(CONFIG_POST) += post.o tests.o
-COBJS-y	+= string.o
-
-SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/lib_blackfin/__kgdb.S b/lib_blackfin/__kgdb.S
deleted file mode 100644
index cba4179..0000000
--- a/lib_blackfin/__kgdb.S
+++ /dev/null
@@ -1,155 +0,0 @@
-
-#include <asm/linkage.h>
-
-/* save stack context for non-local goto
- * int kgdb_setjmp(long *buf)
- */
-
-ENTRY(_kgdb_setjmp)
-	[--SP] = p0; 	/* Save P0 */
-	p0 = r0;
-	r0 = [SP++];	/* Load P0 into R0 */
-
-	[p0 + 0x00] = r0;       /* GP address registers */
-	[p0 + 0x04] = p1;
-	[p0 + 0x08] = p2;
-	[p0 + 0x0C] = p3;
-	[p0 + 0x10] = p4;
-	[p0 + 0x14] = p5;
-	[p0 + 0x18] = FP;       /* frame pointer */
-	[p0 + 0x1C] = SP;       /* stack pointer */
-
-	[p0 + 0x20] = p0;       /* data regs */
-	[p0 + 0x24] = r1;
-	[p0 + 0x28] = r2;
-	[p0 + 0x2C] = r3;
-	[p0 + 0x30] = r4;
-	[p0 + 0x34] = r5;
-	[p0 + 0x38] = r6;
-	[p0 + 0x3C] = r7;
-
-	r0 = ASTAT;	[p0 + 0x40] = r0;
-
-	/* loop counters */
-	r0 = LC0;	[p0 + 0x44] = r0;
-	r0 = LC1;	[p0 + 0x48] = r0;
-
-	/* Accumulator */
-	r0 = A0.w;	[p0 + 0x4C] = r0;
-	r0.l = A0.x;	[p0 + 0x50] = r0;
-	r0 = A1.w;	[p0 + 0x54] = r0;
-	r0.l = A1.x;	[p0 + 0x58] = r0;
-
-	/* index registers */
-	r0 = i0;	[p0 + 0x5C] = r0;
-	r0 = i1;	[p0 + 0x60] = r0;
-	r0 = i2;	[p0 + 0x64] = r0;
-	r0 = i3;	[p0 + 0x68] = r0;
-
-	/* modifier registers */
-	r0 = m0;	[p0 + 0x6C] = r0;
-	r0 = m1;	[p0 + 0x70] = r0;
-	r0 = m2;	[p0 + 0x74] = r0;
-	r0 = m3;	[p0 + 0x78] = r0;
-
-	/* length registers */
-	r0 = l0;	[p0 + 0x7C] = r0;
-	r0 = l1;	[p0 + 0x80] = r0;
-	r0 = l2;	[p0 + 0x84] = r0;
-	r0 = l3;	[p0 + 0x88] = r0;
-
-	/* base registers */
-	r0 = b0;	[p0 + 0x8C] = r0;
-	r0 = b1;	[p0 + 0x90] = r0;
-	r0 = b2;	[p0 + 0x94] = r0;
-	r0 = b3;	[p0 + 0x98] = r0;
-
-	/* store return address */
-	r0 = RETS;	[p0 + 0x9C] = r0;
-
-	R0 = 0;
-	RTS;
-ENDPROC(_kgdb_setjmp)
-
-/*
- * non-local jump to a saved stack context
- * longjmp(long *buf, int val)
- */
-
-ENTRY(_kgdb_longjmp)
-	p0 = r0;
-	r0 = [p0 + 0x00];
-	[--sp] = r0;
-
-	/* GP address registers - skip p0 for now*/
-	p1 = [p0 + 0x04];
-	p2 = [p0 + 0x08];
-	p3 = [p0 + 0x0C];
-	p4 = [p0 + 0x10];
-	p5 = [p0 + 0x14];
-	/* frame pointer */
-	fp = [p0 + 0x18];
-	/* stack pointer */
-	r0 = [sp++];
-	sp = [p0 + 0x1C];
-	[--sp] = r0;
-	[--sp] = r1;
-
-	/* data regs */
-	r0 = [p0 + 0x20];
-	r1 = [p0 + 0x24];
-	r2 = [p0 + 0x28];
-	r3 = [p0 + 0x2C];
-	r4 = [p0 + 0x30];
-	r5 = [p0 + 0x34];
-	r6 = [p0 + 0x38];
-	r7 = [p0 + 0x3C];
-
-	r0 = [p0 + 0x40];	ASTAT = r0;
-
-	/* loop counters */
-	r0 = [p0 + 0x44];	LC0 = r0;
-	r0 = [p0 + 0x48];	LC1 = r0;
-
-	/* Accumulator */
-	r0 = [p0 + 0x4C];	A0.w = r0;
-	r0 = [p0 + 0x50];	A0.x = r0;
-	r0 = [p0 + 0x54];	A1.w = r0;
-	r0 = [p0 + 0x58];	A1.x = r0;
-
-	/* index registers */
-	r0 = [p0 + 0x5C];	i0 = r0;
-	r0 = [p0 + 0x60];	i1 = r0;
-	r0 = [p0 + 0x64];	i2 = r0;
-	r0 = [p0 + 0x68];	i3 = r0;
-
-	/* modifier registers */
-	r0 = [p0 + 0x6C];	m0 = r0;
-	r0 = [p0 + 0x70];	m1 = r0;
-	r0 = [p0 + 0x74];	m2 = r0;
-	r0 = [p0 + 0x78];	m3 = r0;
-
-	/* length registers */
-	r0 = [p0 + 0x7C];	l0 = r0;
-	r0 = [p0 + 0x80];	l1 = r0;
-	r0 = [p0 + 0x84];	l2 = r0;
-	r0 = [p0 + 0x88];	l3 = r0;
-
-	/* base registers */
-	r0 = [p0 + 0x8C];	b0 = r0;
-	r0 = [p0 + 0x90];	b1 = r0;
-	r0 = [p0 + 0x94];	b2 = r0;
-	r0 = [p0 + 0x98];	b3 = r0;
-
-	/* store return address */
-	r0 = [p0 + 0x9C];	RETS = r0;
-
-	/* fixup R0 & P0 */
-	r0 = [sp++];
-	p0 = [sp++];
-	CC = R0 == 0;
-	IF !CC JUMP .Lfinished;
-	R0 = 1;
-.Lfinished:
-	RTS;
-ENDPROC(_kgdb_longjmp)
diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c
deleted file mode 100644
index 4e9bb19..0000000
--- a/lib_blackfin/board.c
+++ /dev/null
@@ -1,419 +0,0 @@
-/*
- * U-boot - board.c First C file to be called contains init routines
- *
- * Copyright (c) 2005-2008 Analog Devices Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <command.h>
-#include <stdio_dev.h>
-#include <environment.h>
-#include <malloc.h>
-#include <mmc.h>
-#include <net.h>
-#include <timestamp.h>
-#include <status_led.h>
-#include <version.h>
-
-#include <asm/cplb.h>
-#include <asm/mach-common/bits/mpu.h>
-#include <kgdb.h>
-
-#ifdef CONFIG_CMD_NAND
-#include <nand.h>	/* cannot even include nand.h if it isnt configured */
-#endif
-
-#ifdef CONFIG_BITBANGMII
-#include <miiphy.h>
-#endif
-
-#if defined(CONFIG_POST)
-#include <post.h>
-int post_flag;
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-const char version_string[] = U_BOOT_VERSION " ("U_BOOT_DATE" - "U_BOOT_TIME")";
-
-__attribute__((always_inline))
-static inline void serial_early_puts(const char *s)
-{
-#ifdef CONFIG_DEBUG_EARLY_SERIAL
-	serial_puts("Early: ");
-	serial_puts(s);
-#endif
-}
-
-static int display_banner(void)
-{
-	printf("\n\n%s\n\n", version_string);
-	printf("CPU:   ADSP " MK_STR(CONFIG_BFIN_CPU) " "
-		"(Detected Rev: 0.%d) "
-		"(%s boot)\n",
-		bfin_revid(),
-		get_bfin_boot_mode(CONFIG_BFIN_BOOT_MODE));
-	return 0;
-}
-
-static int init_baudrate(void)
-{
-	char baudrate[15];
-	int i = getenv_r("baudrate", baudrate, sizeof(baudrate));
-	gd->bd->bi_baudrate = gd->baudrate = (i > 0)
-	    ? simple_strtoul(baudrate, NULL, 10)
-	    : CONFIG_BAUDRATE;
-	return 0;
-}
-
-static void display_global_data(void)
-{
-	bd_t *bd;
-
-#ifndef CONFIG_DEBUG_EARLY_SERIAL
-	return;
-#endif
-
-	bd = gd->bd;
-	printf(" gd: %p\n", gd);
-	printf(" |-flags: %lx\n", gd->flags);
-	printf(" |-board_type: %lx\n", gd->board_type);
-	printf(" |-baudrate: %lu\n", gd->baudrate);
-	printf(" |-have_console: %lx\n", gd->have_console);
-	printf(" |-ram_size: %lx\n", gd->ram_size);
-	printf(" |-env_addr: %lx\n", gd->env_addr);
-	printf(" |-env_valid: %lx\n", gd->env_valid);
-	printf(" |-jt(%p): %p\n", gd->jt, *(gd->jt));
-	printf(" \\-bd: %p\n", gd->bd);
-	printf("   |-bi_baudrate: %x\n", bd->bi_baudrate);
-	printf("   |-bi_ip_addr: %lx\n", bd->bi_ip_addr);
-	printf("   |-bi_boot_params: %lx\n", bd->bi_boot_params);
-	printf("   |-bi_memstart: %lx\n", bd->bi_memstart);
-	printf("   |-bi_memsize: %lx\n", bd->bi_memsize);
-	printf("   |-bi_flashstart: %lx\n", bd->bi_flashstart);
-	printf("   |-bi_flashsize: %lx\n", bd->bi_flashsize);
-	printf("   \\-bi_flashoffset: %lx\n", bd->bi_flashoffset);
-}
-
-#define CPLB_PAGE_SIZE (4 * 1024 * 1024)
-#define CPLB_PAGE_MASK (~(CPLB_PAGE_SIZE - 1))
-void init_cplbtables(void)
-{
-	volatile uint32_t *ICPLB_ADDR, *ICPLB_DATA;
-	volatile uint32_t *DCPLB_ADDR, *DCPLB_DATA;
-	uint32_t extern_memory;
-	size_t i;
-
-	void icplb_add(uint32_t addr, uint32_t data)
-	{
-		*(ICPLB_ADDR + i) = addr;
-		*(ICPLB_DATA + i) = data;
-	}
-	void dcplb_add(uint32_t addr, uint32_t data)
-	{
-		*(DCPLB_ADDR + i) = addr;
-		*(DCPLB_DATA + i) = data;
-	}
-
-	/* populate a few common entries ... we'll let
-	 * the memory map and cplb exception handler do
-	 * the rest of the work.
-	 */
-	i = 0;
-	ICPLB_ADDR = (uint32_t *)ICPLB_ADDR0;
-	ICPLB_DATA = (uint32_t *)ICPLB_DATA0;
-	DCPLB_ADDR = (uint32_t *)DCPLB_ADDR0;
-	DCPLB_DATA = (uint32_t *)DCPLB_DATA0;
-
-	icplb_add(0xFFA00000, L1_IMEMORY);
-	dcplb_add(0xFF800000, L1_DMEMORY);
-	++i;
-
-	if (CONFIG_MEM_SIZE) {
-		uint32_t mbase = CONFIG_SYS_MONITOR_BASE;
-		uint32_t mend  = mbase + CONFIG_SYS_MONITOR_LEN;
-		mbase &= CPLB_PAGE_MASK;
-		mend &= CPLB_PAGE_MASK;
-
-		icplb_add(mbase, SDRAM_IKERNEL);
-		dcplb_add(mbase, SDRAM_DKERNEL);
-		++i;
-
-		/*
-		 * If the monitor crosses a 4 meg boundary, we'll need
-		 * to lock two entries for it.  We assume it doesn't
-		 * cross two 4 meg boundaries ...
-		 */
-		if (mbase != mend) {
-			icplb_add(mend, SDRAM_IKERNEL);
-			dcplb_add(mend, SDRAM_DKERNEL);
-			++i;
-		}
-	}
-
-	icplb_add(0x20000000, SDRAM_INON_CHBL);
-	dcplb_add(0x20000000, SDRAM_EBIU);
-	++i;
-
-	/* Add entries for the rest of external RAM up to the bootrom */
-	extern_memory = 0;
-
-#ifdef CONFIG_DEBUG_NULL_PTR
-	icplb_add(extern_memory, (SDRAM_IKERNEL & ~PAGE_SIZE_MASK) | PAGE_SIZE_1KB);
-	dcplb_add(extern_memory, (SDRAM_DKERNEL & ~PAGE_SIZE_MASK) | PAGE_SIZE_1KB);
-	++i;
-	icplb_add(extern_memory, SDRAM_IKERNEL);
-	dcplb_add(extern_memory, SDRAM_DKERNEL);
-	extern_memory += CPLB_PAGE_SIZE;
-	++i;
-#endif
-
-	while (i < 16 && extern_memory < (CONFIG_SYS_MONITOR_BASE & CPLB_PAGE_MASK)) {
-		icplb_add(extern_memory, SDRAM_IGENERIC);
-		dcplb_add(extern_memory, SDRAM_DGENERIC);
-		extern_memory += CPLB_PAGE_SIZE;
-		++i;
-	}
-	while (i < 16) {
-		icplb_add(0, 0);
-		dcplb_add(0, 0);
-		++i;
-	}
-}
-
-/*
- * All attempts to come up with a "common" initialization sequence
- * that works for all boards and architectures failed: some of the
- * requirements are just _too_ different. To get rid of the resulting
- * mess of board dependend #ifdef'ed code we now make the whole
- * initialization sequence configurable to the user.
- *
- * The requirements for any new initalization function is simple: it
- * receives a pointer to the "global data" structure as it's only
- * argument, and returns an integer return code, where 0 means
- * "continue" and != 0 means "fatal error, hang the system".
- */
-
-extern int watchdog_init(void);
-extern int exception_init(void);
-extern int irq_init(void);
-extern int timer_init(void);
-
-void board_init_f(ulong bootflag)
-{
-	ulong addr;
-	bd_t *bd;
-	char buf[32];
-
-#ifdef CONFIG_BOARD_EARLY_INIT_F
-	serial_early_puts("Board early init flash\n");
-	board_early_init_f();
-#endif
-
-	serial_early_puts("Init CPLB tables\n");
-	init_cplbtables();
-
-	serial_early_puts("Exceptions setup\n");
-	exception_init();
-
-#ifndef CONFIG_ICACHE_OFF
-	serial_early_puts("Turn on ICACHE\n");
-	icache_enable();
-#endif
-#ifndef CONFIG_DCACHE_OFF
-	serial_early_puts("Turn on DCACHE\n");
-	dcache_enable();
-#endif
-
-#ifdef CONFIG_WATCHDOG
-	serial_early_puts("Setting up external watchdog\n");
-	watchdog_init();
-#endif
-
-#ifdef DEBUG
-	if (CONFIG_SYS_GBL_DATA_SIZE < sizeof(*gd))
-		hang();
-#endif
-	serial_early_puts("Init global data\n");
-	gd = (gd_t *) (CONFIG_SYS_GBL_DATA_ADDR);
-	memset((void *)gd, 0, CONFIG_SYS_GBL_DATA_SIZE);
-
-	/* Board data initialization */
-	addr = (CONFIG_SYS_GBL_DATA_ADDR + sizeof(gd_t));
-
-	/* Align to 4 byte boundary */
-	addr &= ~(4 - 1);
-	bd = (bd_t *) addr;
-	gd->bd = bd;
-	memset((void *)bd, 0, sizeof(bd_t));
-
-	bd->bi_r_version = version_string;
-	bd->bi_cpu = MK_STR(CONFIG_BFIN_CPU);
-	bd->bi_board_name = BFIN_BOARD_NAME;
-	bd->bi_vco = get_vco();
-	bd->bi_cclk = get_cclk();
-	bd->bi_sclk = get_sclk();
-	bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
-	bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE;
-
-	/* Initialize */
-	serial_early_puts("IRQ init\n");
-	irq_init();
-	serial_early_puts("Environment init\n");
-	env_init();
-	serial_early_puts("Baudrate init\n");
-	init_baudrate();
-	serial_early_puts("Serial init\n");
-	serial_init();
-	serial_early_puts("Console init flash\n");
-	console_init_f();
-	serial_early_puts("End of early debugging\n");
-	display_banner();
-
-	checkboard();
-	timer_init();
-
-	printf("Clock: VCO: %s MHz, ", strmhz(buf, get_vco()));
-	printf("Core: %s MHz, ", strmhz(buf, get_cclk()));
-	printf("System: %s MHz\n", strmhz(buf, get_sclk()));
-
-	printf("RAM:   ");
-	print_size(bd->bi_memsize, "\n");
-#if defined(CONFIG_POST)
-	post_init_f();
-	post_bootmode_init();
-	post_run(NULL, POST_ROM | post_bootmode_get(0));
-#endif
-
-	board_init_r((gd_t *) gd, 0x20000010);
-}
-
-static void board_net_init_r(bd_t *bd)
-{
-#ifdef CONFIG_BITBANGMII
-	bb_miiphy_init();
-#endif
-#ifdef CONFIG_CMD_NET
-	char *s;
-
-	if ((s = getenv("bootfile")) != NULL)
-		copy_filename(BootFile, s, sizeof(BootFile));
-
-	bd->bi_ip_addr = getenv_IPaddr("ipaddr");
-
-	printf("Net:   ");
-	eth_initialize(gd->bd);
-#endif
-}
-
-void board_init_r(gd_t * id, ulong dest_addr)
-{
-	char *s;
-	bd_t *bd;
-	gd = id;
-	gd->flags |= GD_FLG_RELOC;	/* tell others: relocation done */
-	bd = gd->bd;
-
-#if defined(CONFIG_POST)
-	post_output_backlog();
-	post_reloc();
-#endif
-
-	/* initialize malloc() area */
-	mem_malloc_init(CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN);
-
-#if	!defined(CONFIG_SYS_NO_FLASH)
-	/* Initialize the flash and protect u-boot by default */
-	extern flash_info_t flash_info[];
-	puts("Flash: ");
-	ulong size = flash_init();
-	print_size(size, "\n");
-	flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_FLASH_BASE,
-		CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN - 1,
-		&flash_info[0]);
-	bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
-	bd->bi_flashsize = size;
-	bd->bi_flashoffset = 0;
-#else
-	bd->bi_flashstart = 0;
-	bd->bi_flashsize = 0;
-	bd->bi_flashoffset = 0;
-#endif
-
-#ifdef CONFIG_CMD_NAND
-	puts("NAND:  ");
-	nand_init();		/* go init the NAND */
-#endif
-
-#ifdef CONFIG_GENERIC_MMC
-	puts("MMC:  ");
-	mmc_initialize(bd);
-#endif
-
-	/* relocate environment function pointers etc. */
-	env_relocate();
-
-	/* Initialize stdio devices */
-	stdio_init();
-	jumptable_init();
-
-	/* Initialize the console (after the relocation and devices init) */
-	console_init_r();
-
-#ifdef CONFIG_CMD_KGDB
-	puts("KGDB:  ");
-	kgdb_init();
-#endif
-
-#ifdef CONFIG_STATUS_LED
-	status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
-	status_led_set(STATUS_LED_CRASH, STATUS_LED_OFF);
-#endif
-
-	/* Initialize from environment */
-	if ((s = getenv("loadaddr")) != NULL)
-		load_addr = simple_strtoul(s, NULL, 16);
-
-#if defined(CONFIG_MISC_INIT_R)
-	/* miscellaneous platform dependent initialisations */
-	misc_init_r();
-#endif
-
-	board_net_init_r(bd);
-
-	display_global_data();
-
-#if defined(CONFIG_POST)
-	if (post_flag)
-		post_run(NULL, POST_RAM | post_bootmode_get(0));
-#endif
-
-	if (bfin_os_log_check()) {
-		puts("\nLog buffer from operating system:\n");
-		bfin_os_log_dump();
-		puts("\n");
-	}
-
-	/* main_loop() can return to retry autoboot, if so just run it again. */
-	for (;;)
-		main_loop();
-}
-
-void hang(void)
-{
-#ifdef CONFIG_STATUS_LED
-	status_led_set(STATUS_LED_BOOT, STATUS_LED_OFF);
-	status_led_set(STATUS_LED_CRASH, STATUS_LED_BLINKING);
-#endif
-	puts("### ERROR ### Please RESET the board ###\n");
-	while (1)
-		/* If a JTAG emulator is hooked up, we'll automatically trigger
-		 * a breakpoint in it.  If one isn't, this is just a NOP.
-		 */
-		asm("emuexcpt;");
-}
diff --git a/lib_blackfin/boot.c b/lib_blackfin/boot.c
deleted file mode 100644
index 951d5b0..0000000
--- a/lib_blackfin/boot.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * U-boot - boot.c - misc boot helper functions
- *
- * Copyright (c) 2005-2008 Analog Devices Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <command.h>
-#include <image.h>
-#include <asm/blackfin.h>
-
-#ifdef SHARED_RESOURCES
-extern void swap_to(int device_id);
-#endif
-
-static char *make_command_line(void)
-{
-	char *dest = (char *)CONFIG_LINUX_CMDLINE_ADDR;
-	char *bootargs = getenv("bootargs");
-
-	if (bootargs == NULL)
-		return NULL;
-
-	strncpy(dest, bootargs, CONFIG_LINUX_CMDLINE_SIZE);
-	dest[CONFIG_LINUX_CMDLINE_SIZE - 1] = 0;
-	return dest;
-}
-
-extern ulong bfin_poweron_retx;
-
-int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
-{
-	int	(*appl) (char *cmdline);
-	char	*cmdline;
-
-	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
-		return 1;
-
-#ifdef SHARED_RESOURCES
-	swap_to(FLASH);
-#endif
-
-	appl = (int (*)(char *))images->ep;
-
-	printf("Starting Kernel at = %p\n", appl);
-	cmdline = make_command_line();
-	icache_disable();
-	dcache_disable();
-	asm __volatile__(
-		"RETX = %[retx];"
-		"CALL (%0);"
-		:
-		: "p"(appl), "q0"(cmdline), [retx] "d"(bfin_poweron_retx)
-	);
-	/* does not return */
-
-	return 1;
-}
diff --git a/lib_blackfin/cache.c b/lib_blackfin/cache.c
deleted file mode 100644
index 0a321a4..0000000
--- a/lib_blackfin/cache.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * U-boot - cache.c
- *
- * Copyright (c) 2005-2008 Analog Devices Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <asm/blackfin.h>
-#include <asm/mach-common/bits/mpu.h>
-
-void flush_cache(unsigned long addr, unsigned long size)
-{
-	void *start_addr, *end_addr;
-	int istatus, dstatus;
-
-	/* no need to flush stuff in on chip memory (L1/L2/etc...) */
-	if (addr >= 0xE0000000)
-		return;
-
-	start_addr = (void *)addr;
-	end_addr = (void *)(addr + size);
-	istatus = icache_status();
-	dstatus = dcache_status();
-
-	if (istatus) {
-		if (dstatus)
-			blackfin_icache_dcache_flush_range(start_addr, end_addr);
-		else
-			blackfin_icache_flush_range(start_addr, end_addr);
-	} else if (dstatus)
-		blackfin_dcache_flush_range(start_addr, end_addr);
-}
-
-#ifdef CONFIG_DCACHE_WB
-static void flushinv_all_dcache(void)
-{
-	u32 way, bank, subbank, set;
-	u32 status, addr;
-	u32 dmem_ctl = bfin_read_DMEM_CONTROL();
-
-	for (bank = 0; bank < 2; ++bank) {
-		if (!(dmem_ctl & (1 << (DMC1_P - bank))))
-			continue;
-
-		for (way = 0; way < 2; ++way)
-			for (subbank = 0; subbank < 4; ++subbank)
-				for (set = 0; set < 64; ++set) {
-
-					bfin_write_DTEST_COMMAND(
-						way << 26 |
-						bank << 23 |
-						subbank << 16 |
-						set << 5
-					);
-					CSYNC();
-					status = bfin_read_DTEST_DATA0();
-
-					/* only worry about valid/dirty entries */
-					if ((status & 0x3) != 0x3)
-						continue;
-
-					/* construct the address using the tag */
-					addr = (status & 0xFFFFC800) | (subbank << 12) | (set << 5);
-
-					/* flush it */
-					__asm__ __volatile__("FLUSHINV[%0];" : : "a"(addr));
-				}
-	}
-}
-#endif
-
-void icache_enable(void)
-{
-	bfin_write_IMEM_CONTROL(IMC | ENICPLB);
-	SSYNC();
-}
-
-void icache_disable(void)
-{
-	bfin_write_IMEM_CONTROL(0);
-	SSYNC();
-}
-
-int icache_status(void)
-{
-	return bfin_read_IMEM_CONTROL() & IMC;
-}
-
-void dcache_enable(void)
-{
-	bfin_write_DMEM_CONTROL(ACACHE_BCACHE | ENDCPLB | PORT_PREF0);
-	SSYNC();
-}
-
-void dcache_disable(void)
-{
-#ifdef CONFIG_DCACHE_WB
-	bfin_write_DMEM_CONTROL(bfin_read_DMEM_CONTROL() & ~(ENDCPLB));
-	flushinv_all_dcache();
-#endif
-	bfin_write_DMEM_CONTROL(0);
-	SSYNC();
-}
-
-int dcache_status(void)
-{
-	return bfin_read_DMEM_CONTROL() & ACACHE_BCACHE;
-}
diff --git a/lib_blackfin/clocks.c b/lib_blackfin/clocks.c
deleted file mode 100644
index 0be395b..0000000
--- a/lib_blackfin/clocks.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * clocks.c - figure out sclk/cclk/vco and such
- *
- * Copyright (c) 2005-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <asm/blackfin.h>
-
-/* Get the voltage input multiplier */
-static u_long cached_vco_pll_ctl, cached_vco;
-u_long get_vco(void)
-{
-	u_long msel;
-
-	u_long pll_ctl = bfin_read_PLL_CTL();
-	if (pll_ctl == cached_vco_pll_ctl)
-		return cached_vco;
-	else
-		cached_vco_pll_ctl = pll_ctl;
-
-	msel = (pll_ctl >> 9) & 0x3F;
-	if (0 == msel)
-		msel = 64;
-
-	cached_vco = CONFIG_CLKIN_HZ;
-	cached_vco >>= (1 & pll_ctl);	/* DF bit */
-	cached_vco *= msel;
-	return cached_vco;
-}
-
-/* Get the Core clock */
-static u_long cached_cclk_pll_div, cached_cclk;
-u_long get_cclk(void)
-{
-	u_long csel, ssel;
-
-	if (bfin_read_PLL_STAT() & 0x1)
-		return CONFIG_CLKIN_HZ;
-
-	ssel = bfin_read_PLL_DIV();
-	if (ssel == cached_cclk_pll_div)
-		return cached_cclk;
-	else
-		cached_cclk_pll_div = ssel;
-
-	csel = ((ssel >> 4) & 0x03);
-	ssel &= 0xf;
-	if (ssel && ssel < (1 << csel))	/* SCLK > CCLK */
-		cached_cclk = get_vco() / ssel;
-	else
-		cached_cclk = get_vco() >> csel;
-	return cached_cclk;
-}
-
-/* Get the System clock */
-static u_long cached_sclk_pll_div, cached_sclk;
-u_long get_sclk(void)
-{
-	u_long ssel;
-
-	if (bfin_read_PLL_STAT() & 0x1)
-		return CONFIG_CLKIN_HZ;
-
-	ssel = bfin_read_PLL_DIV();
-	if (ssel == cached_sclk_pll_div)
-		return cached_sclk;
-	else
-		cached_sclk_pll_div = ssel;
-
-	ssel &= 0xf;
-
-	cached_sclk = get_vco() / ssel;
-	return cached_sclk;
-}
diff --git a/lib_blackfin/cmd_cache_dump.c b/lib_blackfin/cmd_cache_dump.c
deleted file mode 100644
index de5840e..0000000
--- a/lib_blackfin/cmd_cache_dump.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * U-boot - cmd_cache_dump.c
- *
- * Copyright (c) 2007-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <config.h>
-#include <common.h>
-#include <command.h>
-
-#include <asm/blackfin.h>
-#include <asm/mach-common/bits/mpu.h>
-
-static int check_limit(const char *type, size_t start_limit, size_t end_limit, size_t start, size_t end)
-{
-	if (start >= start_limit && start <= end_limit && \
-	    end <= end_limit && end >= start_limit && \
-	    start <= end)
-		return 0;
-
-	printf("%s limit violation: %zu <= (user:%zu) <= (user:%zu) <= %zu\n",
-		type, start_limit, start, end, end_limit);
-	return 1;
-}
-
-int do_icache_dump(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	int cache_status = icache_status();
-
-	if (cache_status)
-		icache_disable();
-
-	uint32_t cmd_base, tag, cache_upper, cache_lower;
-
-	size_t way, way_start = 0, way_end = 3;
-	size_t sbnk, sbnk_start = 0, sbnk_end = 3;
-	size_t set, set_start = 0, set_end = 31;
-	size_t dw;
-
-	if (argc > 1) {
-		way_start = way_end = simple_strtoul(argv[1], NULL, 10);
-		if (argc > 2) {
-			sbnk_start = sbnk_end = simple_strtoul(argv[2], NULL, 10);
-			if (argc > 3)
-				set_start = set_end = simple_strtoul(argv[3], NULL, 10);
-		}
-	}
-
-	if (check_limit("way", 0, 3, way_start, way_end) || \
-	    check_limit("subbank", 0, 3, sbnk_start, sbnk_end) || \
-	    check_limit("set", 0, 31, set_start, set_end))
-		return 1;
-
-	puts("Way:Subbank:Set: [valid-tag lower upper] {invalid-tag lower upper}...\n");
-
-	for (way = way_start; way <= way_end; ++way) {
-		for (sbnk = sbnk_start; sbnk <= sbnk_end; ++sbnk) {
-			for (set = set_start; set <= set_end; ++set) {
-				printf("%zu:%zu:%2zu: ", way, sbnk, set);
-				for (dw = 0; dw < 4; ++dw) {
-					if (ctrlc())
-						return 1;
-
-					cmd_base = \
-						(way  << 26) | \
-						(sbnk << 16) | \
-						(set  <<  5) | \
-						(dw   <<  3);
-
-					/* first read the tag */
-					bfin_write_ITEST_COMMAND(cmd_base | 0x0);
-					SSYNC();
-					tag = bfin_read_ITEST_DATA0();
-					printf("%c%08x ", (tag & 0x1 ? ' ' : '{'), tag);
-
-					/* grab the data at this loc */
-					bfin_write_ITEST_COMMAND(cmd_base | 0x4);
-					SSYNC();
-					cache_lower = bfin_read_ITEST_DATA0();
-					cache_upper = bfin_read_ITEST_DATA1();
-					printf("%08x %08x%c ", cache_lower, cache_upper, (tag & 0x1 ? ' ' : '}'));
-				}
-				puts("\n");
-			}
-		}
-	}
-
-	if (cache_status)
-		icache_enable();
-
-	return 0;
-}
-
-U_BOOT_CMD(icache_dump, 4, 0, do_icache_dump,
-	"icache_dump - dump current instruction cache\n",
-	"[way] [subbank] [set]");
-
-int do_dcache_dump(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	u32 way, bank, subbank, set;
-	u32 status, addr;
-	u32 dmem_ctl = bfin_read_DMEM_CONTROL();
-
-	for (bank = 0; bank < 2; ++bank) {
-		if (!(dmem_ctl & (1 << (DMC1_P - bank))))
-			continue;
-
-		for (way = 0; way < 2; ++way)
-			for (subbank = 0; subbank < 4; ++subbank) {
-				printf("%i:%i:%i:\t", bank, way, subbank);
-				for (set = 0; set < 64; ++set) {
-
-					if (ctrlc())
-						return 1;
-
-					/* retrieve a cache tag */
-					bfin_write_DTEST_COMMAND(
-						way << 26 |
-						bank << 23 |
-						subbank << 16 |
-						set << 5
-					);
-					CSYNC();
-					status = bfin_read_DTEST_DATA0();
-
-					/* construct the address using the tag */
-					addr = (status & 0xFFFFC800) | (subbank << 12) | (set << 5);
-
-					/* show it */
-					if (set && !(set % 4))
-						puts("\n\t");
-					printf("%c%08x%c%08x%c ", (status & 0x1 ? '[' : '{'), status, (status & 0x2 ? 'd' : ' '), addr, (status & 0x1 ? ']' : '}'));
-				}
-				puts("\n");
-			}
-	}
-
-	return 0;
-}
-
-U_BOOT_CMD(dcache_dump, 4, 0, do_dcache_dump,
-	"dcache_dump - dump current data cache\n",
-	"[bank] [way] [subbank] [set]");
diff --git a/lib_blackfin/config.mk b/lib_blackfin/config.mk
deleted file mode 100644
index 3ecade9..0000000
--- a/lib_blackfin/config.mk
+++ /dev/null
@@ -1,72 +0,0 @@
-#
-# (C) Copyright 2000-2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CROSS_COMPILE ?= bfin-uclinux-
-
-STANDALONE_LOAD_ADDR = 0x1000 -m elf32bfin
-
-CONFIG_BFIN_CPU := $(strip $(subst ",,$(CONFIG_BFIN_CPU)))
-CONFIG_BFIN_BOOT_MODE := $(strip $(subst ",,$(CONFIG_BFIN_BOOT_MODE)))
-CONFIG_ENV_OFFSET := $(strip $(subst ",,$(CONFIG_ENV_OFFSET)))
-CONFIG_ENV_SIZE := $(strip $(subst ",,$(CONFIG_ENV_SIZE)))
-
-PLATFORM_RELFLAGS += -ffixed-P3 -fomit-frame-pointer -mno-fdpic
-PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN
-
-LDFLAGS += --gc-sections -m elf32bfin
-PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
-
-ifneq (,$(CONFIG_BFIN_CPU))
-PLATFORM_RELFLAGS += -mcpu=$(CONFIG_BFIN_CPU)
-endif
-
-ifneq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS)
-ALL += $(obj)u-boot.ldr
-endif
-ifeq ($(CONFIG_ENV_IS_EMBEDDED_IN_LDR),y)
-CREATE_LDR_ENV = $(obj)tools/envcrc --binary > $(obj)env-ldr.o
-else
-CREATE_LDR_ENV =
-endif
-
-SYM_PREFIX = _
-
-LDR_FLAGS-y :=
-LDR_FLAGS-$(CONFIG_BFIN_BOOTROM_USES_EVT1) += -J
-
-LDR_FLAGS += --bmode $(subst BFIN_BOOT_,,$(CONFIG_BFIN_BOOT_MODE))
-LDR_FLAGS += --use-vmas
-LDR_FLAGS += --initcode $(obj)$(CPUDIR)/initcode.o
-ifneq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_UART)
-LDR_FLAGS-$(CONFIG_ENV_IS_EMBEDDED_IN_LDR) += \
-	--punchit $$(($(CONFIG_ENV_OFFSET))):$$(($(CONFIG_ENV_SIZE))):$(obj)env-ldr.o
-endif
-ifneq (,$(findstring s,$(MAKEFLAGS)))
-LDR_FLAGS += --quiet
-endif
-
-LDR_FLAGS += $(LDR_FLAGS-y)
-
-ifeq ($(wildcard $(TOPDIR)/board/$(BOARD)/u-boot.lds*),)
-LDSCRIPT = $(obj)lib_$(ARCH)/u-boot.lds.S
-endif
diff --git a/lib_blackfin/ins.S b/lib_blackfin/ins.S
deleted file mode 100644
index 4519596..0000000
--- a/lib_blackfin/ins.S
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * arch/blackfin/lib/ins.S - ins{bwl} using hardware loops
- *
- * Copyright 2004-2008 Analog Devices Inc.
- * Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl>
- * Licensed under the GPL-2 or later.
- */
-
-#include <asm/blackfin.h>
-
-.align 2
-
-#ifdef CONFIG_IPIPE
-# define DO_CLI \
-	[--sp] = rets; \
-	[--sp] = (P5:0); \
-	sp += -12; \
-	call ___ipipe_disable_root_irqs_hw; \
-	sp += 12; \
-	(P5:0) = [sp++];
-# define CLI_INNER_NOP
-#else
-# define DO_CLI cli R3;
-# define CLI_INNER_NOP nop; nop; nop;
-#endif
-
-#ifdef CONFIG_IPIPE
-# define DO_STI \
-	sp += -12; \
-	call ___ipipe_enable_root_irqs_hw; \
-	sp += 12; \
-2:	rets = [sp++];
-#else
-# define DO_STI 2: sti R3;
-#endif
-
-#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
-# define CLI_OUTER DO_CLI;
-# define STI_OUTER DO_STI;
-# define CLI_INNER 1:
-# if ANOMALY_05000416
-#  define STI_INNER nop; 2: nop;
-# else
-#  define STI_INNER 2:
-# endif
-#else
-# define CLI_OUTER
-# define STI_OUTER
-# define CLI_INNER 1: DO_CLI; CLI_INNER_NOP;
-# define STI_INNER DO_STI;
-#endif
-
-/*
- * Reads on the Blackfin are speculative. In Blackfin terms, this means they
- * can be interrupted at any time (even after they have been issued on to the
- * external bus), and re-issued after the interrupt occurs.
- *
- * If a FIFO is sitting on the end of the read, it will see two reads,
- * when the core only sees one. The FIFO receives the read which is cancelled,
- * and not delivered to the core.
- *
- * To solve this, interrupts are turned off before reads occur to I/O space.
- * There are 3 versions of all these functions
- *  - turns interrupts off every read (higher overhead, but lower latency)
- *  - turns interrupts off every loop (low overhead, but longer latency)
- *  - DMA version, which do not suffer from this issue. DMA versions have
- *      different name (prefixed by dma_ ), and are located in
- *      ../kernel/bfin_dma_5xx.c
- * Using the dma related functions are recommended for transfering large
- * buffers in/out of FIFOs.
- */
-
-#define COMMON_INS(func, ops) \
-ENTRY(_ins##func) \
-	P0 = R0;	/* P0 = port */ \
-	CLI_OUTER;	/* 3 instructions before first read access */ \
-	P1 = R1;	/* P1 = address */ \
-	P2 = R2;	/* P2 = count */ \
-	SSYNC; \
- \
-	LSETUP(1f, 2f) LC0 = P2; \
-	CLI_INNER; \
-	ops; \
-	STI_INNER; \
- \
-	STI_OUTER; \
-	RTS; \
-ENDPROC(_ins##func)
-
-COMMON_INS(l, \
-	R0 = [P0]; \
-	[P1++] = R0; \
-)
-
-COMMON_INS(w, \
-	R0 = W[P0]; \
-	W[P1++] = R0; \
-)
-
-COMMON_INS(w_8, \
-	R0 = W[P0]; \
-	B[P1++] = R0; \
-	R0 = R0 >> 8; \
-	B[P1++] = R0; \
-)
-
-COMMON_INS(b, \
-	R0 = B[P0]; \
-	B[P1++] = R0; \
-)
-
-COMMON_INS(l_16, \
-	R0 = [P0]; \
-	W[P1++] = R0; \
-	R0 = R0 >> 16; \
-	W[P1++] = R0; \
-)
diff --git a/lib_blackfin/kgdb.c b/lib_blackfin/kgdb.c
deleted file mode 100644
index bd62d71..0000000
--- a/lib_blackfin/kgdb.c
+++ /dev/null
@@ -1,423 +0,0 @@
-/*
- * U-boot - architecture specific kgdb code
- *
- * Copyright 2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <command.h>
-
-#include <kgdb.h>
-#include <asm/processor.h>
-#include <asm/mach-common/bits/core.h>
-#include "kgdb.h"
-#include <asm/deferred.h>
-#include <asm/traps.h>
-#include <asm/signal.h>
-
-void kgdb_enter(struct pt_regs *regs, kgdb_data *kdp)
-{
-	/* disable interrupts */
-	disable_interrupts();
-
-	/* reply to host that an exception has occurred */
-	kdp->sigval = kgdb_trap(regs);
-
-	/* send the PC and the Stack Pointer */
-	kdp->nregs = 2;
-	kdp->regs[0].num = BFIN_PC;
-	kdp->regs[0].val = regs->pc;
-
-	kdp->regs[1].num = BFIN_SP;
-	kdp->regs[1].val = (unsigned long)regs;
-
-}
-
-void kgdb_exit(struct pt_regs *regs, kgdb_data *kdp)
-{
-	if (kdp->extype & KGDBEXIT_WITHADDR)
-		printf("KGDBEXIT_WITHADDR\n");
-
-	switch (kdp->extype & KGDBEXIT_TYPEMASK) {
-	case KGDBEXIT_KILL:
-		printf("KGDBEXIT_KILL:\n");
-		break;
-	case KGDBEXIT_CONTINUE:
-		/* Make sure the supervisor single step bit is clear */
-		regs->syscfg &= ~1;
-		break;
-	case KGDBEXIT_SINGLE:
-		/* set the supervisor single step bit */
-		regs->syscfg |= 1;
-		break;
-	default:
-		printf("KGDBEXIT : %d\n", kdp->extype);
-	}
-
-	/* enable interrupts */
-	enable_interrupts();
-}
-
-int kgdb_trap(struct pt_regs *regs)
-{
-	/* ipend doesn't get filled in properly */
-	switch (regs->seqstat & EXCAUSE) {
-	case VEC_EXCPT01:
-		return SIGTRAP;
-	case VEC_EXCPT03:
-		return SIGSEGV;
-	case VEC_EXCPT02:
-		return SIGTRAP;
-	case VEC_EXCPT04 ... VEC_EXCPT15:
-		return SIGILL;
-	case VEC_STEP:
-		return SIGTRAP;
-	case VEC_OVFLOW:
-		return SIGTRAP;
-	case VEC_UNDEF_I:
-		return SIGILL;
-	case VEC_ILGAL_I:
-		return SIGILL;
-	case VEC_CPLB_VL:
-		return SIGSEGV;
-	case VEC_MISALI_D:
-		return SIGBUS;
-	case VEC_UNCOV:
-		return SIGILL;
-	case VEC_CPLB_MHIT:
-		return SIGSEGV;
-	case VEC_MISALI_I:
-		return SIGBUS;
-	case VEC_CPLB_I_VL:
-		return SIGBUS;
-	case VEC_CPLB_I_MHIT:
-		return SIGSEGV;
-	default:
-		return SIGBUS;
-	}
-}
-
-/*
- * getregs - gets the pt_regs, and gives them to kgdb's buffer
- */
-int kgdb_getregs(struct pt_regs *regs, char *buf, int max)
-{
-	unsigned long *gdb_regs = (unsigned long *)buf;
-
-	if (max < NUMREGBYTES)
-		kgdb_error(KGDBERR_NOSPACE);
-
-	if ((unsigned long)gdb_regs & 3)
-		kgdb_error(KGDBERR_ALIGNFAULT);
-
-	gdb_regs[BFIN_R0] = regs->r0;
-	gdb_regs[BFIN_R1] = regs->r1;
-	gdb_regs[BFIN_R2] = regs->r2;
-	gdb_regs[BFIN_R3] = regs->r3;
-	gdb_regs[BFIN_R4] = regs->r4;
-	gdb_regs[BFIN_R5] = regs->r5;
-	gdb_regs[BFIN_R6] = regs->r6;
-	gdb_regs[BFIN_R7] = regs->r7;
-	gdb_regs[BFIN_P0] = regs->p0;
-	gdb_regs[BFIN_P1] = regs->p1;
-	gdb_regs[BFIN_P2] = regs->p2;
-	gdb_regs[BFIN_P3] = regs->p3;
-	gdb_regs[BFIN_P4] = regs->p4;
-	gdb_regs[BFIN_P5] = regs->p5;
-	gdb_regs[BFIN_SP] = (unsigned long)regs;
-	gdb_regs[BFIN_FP] = regs->fp;
-	gdb_regs[BFIN_I0] = regs->i0;
-	gdb_regs[BFIN_I1] = regs->i1;
-	gdb_regs[BFIN_I2] = regs->i2;
-	gdb_regs[BFIN_I3] = regs->i3;
-	gdb_regs[BFIN_M0] = regs->m0;
-	gdb_regs[BFIN_M1] = regs->m1;
-	gdb_regs[BFIN_M2] = regs->m2;
-	gdb_regs[BFIN_M3] = regs->m3;
-	gdb_regs[BFIN_B0] = regs->b0;
-	gdb_regs[BFIN_B1] = regs->b1;
-	gdb_regs[BFIN_B2] = regs->b2;
-	gdb_regs[BFIN_B3] = regs->b3;
-	gdb_regs[BFIN_L0] = regs->l0;
-	gdb_regs[BFIN_L1] = regs->l1;
-	gdb_regs[BFIN_L2] = regs->l2;
-	gdb_regs[BFIN_L3] = regs->l3;
-	gdb_regs[BFIN_A0_DOT_X] = regs->a0x;
-	gdb_regs[BFIN_A0_DOT_W] = regs->a0w;
-	gdb_regs[BFIN_A1_DOT_X] = regs->a1x;
-	gdb_regs[BFIN_A1_DOT_W] = regs->a1w;
-	gdb_regs[BFIN_ASTAT] = regs->astat;
-	gdb_regs[BFIN_RETS] = regs->rets;
-	gdb_regs[BFIN_LC0] = regs->lc0;
-	gdb_regs[BFIN_LT0] = regs->lt0;
-	gdb_regs[BFIN_LB0] = regs->lb0;
-	gdb_regs[BFIN_LC1] = regs->lc1;
-	gdb_regs[BFIN_LT1] = regs->lt1;
-	gdb_regs[BFIN_LB1] = regs->lb1;
-	gdb_regs[BFIN_CYCLES] = 0;
-	gdb_regs[BFIN_CYCLES2] = 0;
-	gdb_regs[BFIN_USP] = regs->usp;
-	gdb_regs[BFIN_SEQSTAT] = regs->seqstat;
-	gdb_regs[BFIN_SYSCFG] = regs->syscfg;
-	gdb_regs[BFIN_RETI] = regs->pc;
-	gdb_regs[BFIN_RETX] = regs->retx;
-	gdb_regs[BFIN_RETN] = regs->retn;
-	gdb_regs[BFIN_RETE] = regs->rete;
-	gdb_regs[BFIN_PC] = regs->pc;
-	gdb_regs[BFIN_CC] = 0;
-	gdb_regs[BFIN_EXTRA1] = 0;
-	gdb_regs[BFIN_EXTRA2] = 0;
-	gdb_regs[BFIN_EXTRA3] = 0;
-	gdb_regs[BFIN_IPEND] = regs->ipend;
-
-	return NUMREGBYTES;
-}
-
-/*
- * putreg - put kgdb's reg (regno) into the pt_regs
- */
-void kgdb_putreg(struct pt_regs *regs, int regno, char *buf, int length)
-{
-	unsigned long *ptr = (unsigned long *)buf;
-
-	if (regno < 0 || regno > BFIN_NUM_REGS)
-		kgdb_error(KGDBERR_BADPARAMS);
-
-	if (length < 4)
-		kgdb_error(KGDBERR_NOSPACE);
-
-	if ((unsigned long)ptr & 3)
-		kgdb_error(KGDBERR_ALIGNFAULT);
-
-	switch (regno) {
-	case BFIN_R0:
-		regs->r0 = *ptr;
-		break;
-	case BFIN_R1:
-		regs->r1 = *ptr;
-		break;
-	case BFIN_R2:
-		regs->r2 = *ptr;
-		break;
-	case BFIN_R3:
-		regs->r3 = *ptr;
-		break;
-	case BFIN_R4:
-		regs->r4 = *ptr;
-		break;
-	case BFIN_R5:
-		regs->r5 = *ptr;
-		break;
-	case BFIN_R6:
-		regs->r6 = *ptr;
-		break;
-	case BFIN_R7:
-		regs->r7 = *ptr;
-		break;
-	case BFIN_P0:
-		regs->p0 = *ptr;
-		break;
-	case BFIN_P1:
-		regs->p1 = *ptr;
-		break;
-	case BFIN_P2:
-		regs->p2 = *ptr;
-		break;
-	case BFIN_P3:
-		regs->p3 = *ptr;
-		break;
-	case BFIN_P4:
-		regs->p4 = *ptr;
-		break;
-	case BFIN_P5:
-		regs->p5 = *ptr;
-		break;
-	case BFIN_SP:
-		regs->reserved = *ptr;
-		break;
-	case BFIN_FP:
-		regs->fp = *ptr;
-		break;
-	case BFIN_I0:
-		regs->i0 = *ptr;
-		break;
-	case BFIN_I1:
-		regs->i1 = *ptr;
-		break;
-	case BFIN_I2:
-		regs->i2 = *ptr;
-		break;
-	case BFIN_I3:
-		regs->i3 = *ptr;
-		break;
-	case BFIN_M0:
-		regs->m0 = *ptr;
-		break;
-	case BFIN_M1:
-		regs->m1 = *ptr;
-		break;
-	case BFIN_M2:
-		regs->m2 = *ptr;
-		break;
-	case BFIN_M3:
-		regs->m3 = *ptr;
-		break;
-	case BFIN_B0:
-		regs->b0 = *ptr;
-		break;
-	case BFIN_B1:
-		regs->b1 = *ptr;
-		break;
-	case BFIN_B2:
-		regs->b2 = *ptr;
-		break;
-	case BFIN_B3:
-		regs->b3 = *ptr;
-		break;
-	case BFIN_L0:
-		regs->l0 = *ptr;
-		break;
-	case BFIN_L1:
-		regs->l1 = *ptr;
-		break;
-	case BFIN_L2:
-		regs->l2 = *ptr;
-		break;
-	case BFIN_L3:
-		regs->l3 = *ptr;
-		break;
-	case BFIN_A0_DOT_X:
-		regs->a0x = *ptr;
-		break;
-	case BFIN_A0_DOT_W:
-		regs->a0w = *ptr;
-		break;
-	case BFIN_A1_DOT_X:
-		regs->a1x = *ptr;
-		break;
-	case BFIN_A1_DOT_W:
-		regs->a1w = *ptr;
-		break;
-	case BFIN_ASTAT:
-		regs->astat = *ptr;
-		break;
-	case BFIN_RETS:
-		regs->rets = *ptr;
-		break;
-	case BFIN_LC0:
-		regs->lc0 = *ptr;
-		break;
-	case BFIN_LT0:
-		regs->lt0 = *ptr;
-		break;
-	case BFIN_LB0:
-		regs->lb0 = *ptr;
-		break;
-	case BFIN_LC1:
-		regs->lc1 = *ptr;
-		break;
-	case BFIN_LT1:
-		regs->lt1 = *ptr;
-		break;
-	case BFIN_LB1:
-		regs->lb1 = *ptr;
-		break;
-/*
-  BFIN_CYCLES,
-  BFIN_CYCLES2,
-  BFIN_USP,
-  BFIN_SEQSTAT,
-  BFIN_SYSCFG,
-*/
-	case BFIN_RETX:
-		regs->retx = *ptr;
-		break;
-	case BFIN_RETN:
-		regs->retn = *ptr;
-		break;
-	case BFIN_RETE:
-		regs->rete = *ptr;
-		break;
-	case BFIN_PC:
-		regs->pc = *ptr;
-		break;
-
-	default:
-		kgdb_error(KGDBERR_BADPARAMS);
-	}
-}
-
-void kgdb_putregs(struct pt_regs *regs, char *buf, int length)
-{
-	unsigned long *gdb_regs = (unsigned long *)buf;
-
-	if (length != BFIN_NUM_REGS)
-		kgdb_error(KGDBERR_NOSPACE);
-
-	if ((unsigned long)gdb_regs & 3)
-		kgdb_error(KGDBERR_ALIGNFAULT);
-
-	regs->r0 = gdb_regs[BFIN_R0];
-	regs->r1 = gdb_regs[BFIN_R1];
-	regs->r2 = gdb_regs[BFIN_R2];
-	regs->r3 = gdb_regs[BFIN_R3];
-	regs->r4 = gdb_regs[BFIN_R4];
-	regs->r5 = gdb_regs[BFIN_R5];
-	regs->r6 = gdb_regs[BFIN_R6];
-	regs->r7 = gdb_regs[BFIN_R7];
-	regs->p0 = gdb_regs[BFIN_P0];
-	regs->p1 = gdb_regs[BFIN_P1];
-	regs->p2 = gdb_regs[BFIN_P2];
-	regs->p3 = gdb_regs[BFIN_P3];
-	regs->p4 = gdb_regs[BFIN_P4];
-	regs->p5 = gdb_regs[BFIN_P5];
-	regs->fp = gdb_regs[BFIN_FP];
-/*	regs->sp = gdb_regs[BFIN_ ]; */
-	regs->i0 = gdb_regs[BFIN_I0];
-	regs->i1 = gdb_regs[BFIN_I1];
-	regs->i2 = gdb_regs[BFIN_I2];
-	regs->i3 = gdb_regs[BFIN_I3];
-	regs->m0 = gdb_regs[BFIN_M0];
-	regs->m1 = gdb_regs[BFIN_M1];
-	regs->m2 = gdb_regs[BFIN_M2];
-	regs->m3 = gdb_regs[BFIN_M3];
-	regs->b0 = gdb_regs[BFIN_B0];
-	regs->b1 = gdb_regs[BFIN_B1];
-	regs->b2 = gdb_regs[BFIN_B2];
-	regs->b3 = gdb_regs[BFIN_B3];
-	regs->l0 = gdb_regs[BFIN_L0];
-	regs->l1 = gdb_regs[BFIN_L1];
-	regs->l2 = gdb_regs[BFIN_L2];
-	regs->l3 = gdb_regs[BFIN_L3];
-	regs->a0x = gdb_regs[BFIN_A0_DOT_X];
-	regs->a0w = gdb_regs[BFIN_A0_DOT_W];
-	regs->a1x = gdb_regs[BFIN_A1_DOT_X];
-	regs->a1w = gdb_regs[BFIN_A1_DOT_W];
-	regs->rets = gdb_regs[BFIN_RETS];
-	regs->lc0 = gdb_regs[BFIN_LC0];
-	regs->lt0 = gdb_regs[BFIN_LT0];
-	regs->lb0 = gdb_regs[BFIN_LB0];
-	regs->lc1 = gdb_regs[BFIN_LC1];
-	regs->lt1 = gdb_regs[BFIN_LT1];
-	regs->lb1 = gdb_regs[BFIN_LB1];
-	regs->usp = gdb_regs[BFIN_USP];
-	regs->syscfg = gdb_regs[BFIN_SYSCFG];
-	regs->retx = gdb_regs[BFIN_PC];
-	regs->retn = gdb_regs[BFIN_RETN];
-	regs->rete = gdb_regs[BFIN_RETE];
-	regs->pc = gdb_regs[BFIN_PC];
-
-#if 0	/* can't change these */
-	regs->astat = gdb_regs[BFIN_ASTAT];
-	regs->seqstat = gdb_regs[BFIN_SEQSTAT];
-	regs->ipend = gdb_regs[BFIN_IPEND];
-#endif
-
-}
-
-void kgdb_breakpoint(int argc, char *argv[])
-{
-	asm volatile ("excpt 0x1\n");
-}
diff --git a/lib_blackfin/kgdb.h b/lib_blackfin/kgdb.h
deleted file mode 100644
index 18f1f49..0000000
--- a/lib_blackfin/kgdb.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/* Blackfin KGDB header
- *
- * Copyright 2005-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef __ASM_BLACKFIN_KGDB_H__
-#define __ASM_BLACKFIN_KGDB_H__
-
-/* gdb locks */
-#define KGDB_MAX_NO_CPUS 8
-
-/*
- * BUFMAX defines the maximum number of characters in inbound/outbound buffers.
- * At least NUMREGBYTES*2 are needed for register packets.
- * Longer buffer is needed to list all threads.
- */
-#define BUFMAX 2048
-
-enum regnames {
-  /* Core Registers */
-  BFIN_R0 = 0,
-  BFIN_R1,
-  BFIN_R2,
-  BFIN_R3,
-  BFIN_R4,
-  BFIN_R5,
-  BFIN_R6,
-  BFIN_R7,
-  BFIN_P0,
-  BFIN_P1,
-  BFIN_P2,
-  BFIN_P3,
-  BFIN_P4,
-  BFIN_P5,
-  BFIN_SP,
-  BFIN_FP,
-  BFIN_I0,
-  BFIN_I1,
-  BFIN_I2,
-  BFIN_I3,
-  BFIN_M0,
-  BFIN_M1,
-  BFIN_M2,
-  BFIN_M3,
-  BFIN_B0,
-  BFIN_B1,
-  BFIN_B2,
-  BFIN_B3,
-  BFIN_L0,
-  BFIN_L1,
-  BFIN_L2,
-  BFIN_L3,
-  BFIN_A0_DOT_X,
-  BFIN_A0_DOT_W,
-  BFIN_A1_DOT_X,
-  BFIN_A1_DOT_W,
-  BFIN_ASTAT,
-  BFIN_RETS,
-  BFIN_LC0,
-  BFIN_LT0,
-  BFIN_LB0,
-  BFIN_LC1,
-  BFIN_LT1,
-  BFIN_LB1,
-  BFIN_CYCLES,
-  BFIN_CYCLES2,
-  BFIN_USP,
-  BFIN_SEQSTAT,
-  BFIN_SYSCFG,
-  BFIN_RETI,
-  BFIN_RETX,
-  BFIN_RETN,
-  BFIN_RETE,
-
-  /* Pseudo Registers */
-  BFIN_PC,
-  BFIN_CC,
-  BFIN_EXTRA1,		/* Address of .text section.  */
-  BFIN_EXTRA2,		/* Address of .data section.  */
-  BFIN_EXTRA3,		/* Address of .bss section.  */
-  BFIN_FDPIC_EXEC,
-  BFIN_FDPIC_INTERP,
-
-  /* MMRs */
-  BFIN_IPEND,
-
-  /* LAST ENTRY SHOULD NOT BE CHANGED.  */
-  BFIN_NUM_REGS		/* The number of all registers.  */
-};
-
-/* Number of bytes of registers.  */
-#define NUMREGBYTES (BFIN_NUM_REGS * 4)
-
-static inline void arch_kgdb_breakpoint(void)
-{
-	asm volatile ("EXCPT 2;");
-}
-#define BREAK_INSTR_SIZE	2
-#define CACHE_FLUSH_IS_SAFE	1
-#define GDB_ADJUSTS_BREAK_OFFSET
-#define GDB_SKIP_HW_WATCH_TEST
-#define HW_INST_WATCHPOINT_NUM	6
-#define HW_WATCHPOINT_NUM	8
-#define TYPE_INST_WATCHPOINT	0
-#define TYPE_DATA_WATCHPOINT	1
-
-/* Instruction watchpoint address control register bits mask */
-#define WPPWR		0x1
-#define WPIREN01	0x2
-#define WPIRINV01	0x4
-#define WPIAEN0		0x8
-#define WPIAEN1		0x10
-#define WPICNTEN0	0x20
-#define WPICNTEN1	0x40
-#define EMUSW0		0x80
-#define EMUSW1		0x100
-#define WPIREN23	0x200
-#define WPIRINV23	0x400
-#define WPIAEN2		0x800
-#define WPIAEN3		0x1000
-#define WPICNTEN2	0x2000
-#define WPICNTEN3	0x4000
-#define EMUSW2		0x8000
-#define EMUSW3		0x10000
-#define WPIREN45	0x20000
-#define WPIRINV45	0x40000
-#define WPIAEN4		0x80000
-#define WPIAEN5		0x100000
-#define WPICNTEN4	0x200000
-#define WPICNTEN5	0x400000
-#define EMUSW4		0x800000
-#define EMUSW5		0x1000000
-#define WPAND		0x2000000
-
-/* Data watchpoint address control register bits mask */
-#define WPDREN01	0x1
-#define WPDRINV01	0x2
-#define WPDAEN0		0x4
-#define WPDAEN1		0x8
-#define WPDCNTEN0	0x10
-#define WPDCNTEN1	0x20
-
-#define WPDSRC0		0xc0
-#define WPDACC0_OFFSET	8
-#define WPDSRC1		0xc00
-#define WPDACC1_OFFSET	12
-
-/* Watchpoint status register bits mask */
-#define STATIA0		0x1
-#define STATIA1		0x2
-#define STATIA2		0x4
-#define STATIA3		0x8
-#define STATIA4		0x10
-#define STATIA5		0x20
-#define STATDA0		0x40
-#define STATDA1		0x80
-
-#endif
diff --git a/lib_blackfin/memcmp.S b/lib_blackfin/memcmp.S
deleted file mode 100644
index 6c834a7..0000000
--- a/lib_blackfin/memcmp.S
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * File: memcmp.S
- *
- * Copyright 2004-2007 Analog Devices Inc.
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-.align 2
-
-/*
- * C Library function MEMCMP
- * R0 = First Address
- * R1 = Second Address
- * R2 = count
- * Favours word aligned data.
- */
-
-.globl _memcmp;
-.type _memcmp, STT_FUNC;
-_memcmp:
-	I1 = P3;
-	P0 = R0;			/* P0 = s1 address */
-	P3 = R1;			/* P3 = s2 Address  */
-	P2 = R2 ;			/* P2 = count */
-	CC = R2 <= 7(IU);
-	IF CC JUMP  .Ltoo_small;
-	I0 = R1;			/* s2 */
-	R1 = R1 | R0;		/* OR addresses together */
-	R1 <<= 30;		/* check bottom two bits */
-	CC =  AZ;			/* AZ set if zero. */
-	IF !CC JUMP  .Lbytes ;	/* Jump if addrs not aligned. */
-
-	P1 = P2 >> 2;		/* count = n/4 */
-	R3 =  3;
-	R2 = R2 & R3;		/* remainder */
-	P2 = R2;			/* set remainder */
-
-	LSETUP (.Lquad_loop_s , .Lquad_loop_e) LC0=P1;
-.Lquad_loop_s:
-	NOP;
-	R0 = [P0++];
-	R1 = [I0++];
-	CC = R0 == R1;
-	IF !CC JUMP .Lquad_different;
-.Lquad_loop_e:
-	NOP;
-
-	P3 = I0;			/* s2 */
-.Ltoo_small:
-	CC = P2 == 0;		/* Check zero count*/
-	IF CC JUMP .Lfinished;	/* very unlikely*/
-
-.Lbytes:
-	LSETUP (.Lbyte_loop_s , .Lbyte_loop_e) LC0=P2;
-.Lbyte_loop_s:
-	R1 = B[P3++](Z);	/* *s2 */
-	R0 = B[P0++](Z);	/* *s1 */
-	CC = R0 == R1;
-	IF !CC JUMP .Ldifferent;
-.Lbyte_loop_e:
-	NOP;
-
-.Ldifferent:
-	R0 = R0 - R1;
-	P3 = I1;
-	RTS;
-
-.Lquad_different:
-/* We've read two quads which don't match.
- * Can't just compare them, because we're
- * a little-endian machine, so the MSBs of
- * the regs occur at later addresses in the
- * string.
- * Arrange to re-read those two quads again,
- * byte-by-byte.
- */
-	P0 += -4;		/* back up to the start of the */
-	P3 = I0;		/* quads, and increase the*/
-	P2 += 4;		/* remainder count*/
-	P3 += -4;
-	JUMP .Lbytes;
-
-.Lfinished:
-	R0 = 0;
-	P3 = I1;
-	RTS;
-
-.size _memcmp, .-_memcmp
diff --git a/lib_blackfin/memcpy.S b/lib_blackfin/memcpy.S
deleted file mode 100644
index e6b359a..0000000
--- a/lib_blackfin/memcpy.S
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * File: memcpy.S
- *
- * Copyright 2004-2007 Analog Devices Inc.
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-.align 2
-
-.globl _memcpy_ASM;
-.type _memcpy_ASM, STT_FUNC;
-_memcpy_ASM:
-	CC = R2 <=  0;	/* length not positive?*/
-	IF CC JUMP  .L_P1L2147483647;	/* Nothing to do */
-
-	P0 = R0 ;	/* dst*/
-	P1 = R1 ;	/* src*/
-	P2 = R2 ;	/* length */
-
-	/* check for overlapping data */
-	CC = R1 < R0;	/* src < dst */
-	IF !CC JUMP .Lno_overlap;
-	R3 = R1 + R2;
-	CC = R0 < R3;	/* and dst < src+len */
-	IF CC JUMP .Lhas_overlap;
-
-.Lno_overlap:
-	/* Check for aligned data.*/
-
-	R3 = R1 | R0;
-	R0 = 0x3;
-	R3 = R3 & R0;
-	CC = R3;	/* low bits set on either address? */
-	IF CC JUMP .Lnot_aligned;
-
-	/* Both addresses are word-aligned, so we can copy
-	at least part of the data using word copies.*/
-	P2 = P2 >> 2;
-	CC = P2 <= 2;
-	IF !CC JUMP .Lmore_than_seven;
-	/* less than eight bytes... */
-	P2 = R2;
-	LSETUP(.Lthree_start, .Lthree_end) LC0=P2;
-	R0 = R1;	/* setup src address for return */
-.Lthree_start:
-	R3 = B[P1++] (X);
-.Lthree_end:
-	B[P0++] = R3;
-
-	RTS;
-
-.Lmore_than_seven:
-	/* There's at least eight bytes to copy. */
-	P2 += -1;	/* because we unroll one iteration */
-	LSETUP(.Lword_loop, .Lword_loop) LC0=P2;
-	R0 = R1;
-	I1 = P1;
-	R3 = [I1++];
-.Lword_loop:
-	MNOP || [P0++] = R3 || R3 = [I1++];
-
-	[P0++] = R3;
-	/* Any remaining bytes to copy? */
-	R3 = 0x3;
-	R3 = R2 & R3;
-	CC = R3 == 0;
-	P1 = I1;	/* in case there's something left, */
-	IF !CC JUMP .Lbytes_left;
-	RTS;
-.Lbytes_left:	P2 = R3;
-.Lnot_aligned:
-	/* From here, we're copying byte-by-byte. */
-	LSETUP (.Lbyte_start , .Lbyte_end) LC0=P2;
-	R0 = R1;	/* Save src address for return */
-.Lbyte_start:
-	R1 = B[P1++] (X);
-.Lbyte_end:
-	B[P0++] = R1;
-
-.L_P1L2147483647:
-	RTS;
-
-.Lhas_overlap:
-/* Need to reverse the copying, because the
- * dst would clobber the src.
- * Don't bother to work out alignment for
- * the reverse case.
- */
-	R0 = R1;	/* save src for later. */
-	P0 = P0 + P2;
-	P0 += -1;
-	P1 = P1 + P2;
-	P1 += -1;
-	LSETUP(.Lover_start, .Lover_end) LC0=P2;
-.Lover_start:
-	R1 = B[P1--] (X);
-.Lover_end:
-	B[P0--] = R1;
-
-	RTS;
-
-.size _memcpy_ASM, .-_memcpy_ASM
diff --git a/lib_blackfin/memmove.S b/lib_blackfin/memmove.S
deleted file mode 100644
index e385c4f..0000000
--- a/lib_blackfin/memmove.S
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * File: memmove.S
- *
- * Copyright 2004-2007 Analog Devices Inc.
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-.align 2
-
-/*
- * C Library function MEMMOVE
- * R0 = To Address (leave unchanged to form result)
- * R1 = From Address
- * R2 = count
- * Data may overlap
- */
-
-.globl _memmove;
-.type _memmove, STT_FUNC;
-_memmove:
-	I1 = P3;
-	P0 = R0;                  /* P0 = To address */
-	P3 = R1;                  /* P3 = From Address */
-	P2 = R2 ;                 /* P2 = count */
-	CC = P2 == 0;             /* Check zero count*/
-	IF CC JUMP .Lfinished;    /* very unlikely */
-
-	CC = R1 < R0 (IU);        /* From < To */
-	IF !CC JUMP .Lno_overlap;
-	R3 = R1 + R2;
-	CC = R0 <= R3 (IU);       /* (From+len) >= To */
-	IF CC JUMP .Loverlap;
-.Lno_overlap:
-	R3 = 11;
-	CC = R2 <= R3;
-	IF CC JUMP  .Lbytes;
-	R3 = R1 | R0;             /* OR addresses together */
-	R3 <<= 30;                /* check bottom two bits */
-	CC =  AZ;                 /* AZ set if zero.*/
-	IF !CC JUMP  .Lbytes ;    /* Jump if addrs not aligned.*/
-
-	I0 = P3;
-	P1 = P2 >> 2;             /* count = n/4 */
-	P1 += -1;
-	R3 =  3;
-	R2 = R2 & R3;             /* remainder */
-	P2 = R2;                  /* set remainder */
-	R1 = [I0++];
-
-	LSETUP (.Lquad_loop , .Lquad_loop) LC0=P1;
-.Lquad_loop: MNOP || [P0++] = R1 || R1 = [I0++];
-	[P0++] = R1;
-
-	CC = P2 == 0;             /* any remaining bytes? */
-	P3 = I0;                  /* Ammend P3 to updated ptr. */
-	IF !CC JUMP .Lbytes;
-	P3 = I1;
-	RTS;
-
-.Lbytes:     LSETUP (.Lbyte2_s , .Lbyte2_e) LC0=P2;
-.Lbyte2_s:   R1 = B[P3++](Z);
-.Lbyte2_e:   B[P0++] = R1;
-
-.Lfinished:  P3 = I1;
-	RTS;
-
-.Loverlap:
-	P2 += -1;
-	P0 = P0 + P2;
-	P3 = P3 + P2;
-	R1 = B[P3--] (Z);
-	CC = P2 == 0;
-	IF CC JUMP .Lno_loop;
-	LSETUP (.Lol_s, .Lol_e) LC0 = P2;
-.Lol_s:    B[P0--] = R1;
-.Lol_e:    R1 = B[P3--] (Z);
-.Lno_loop: B[P0] = R1;
-	P3 = I1;
-	RTS;
-
-.size _memmove, .-_memmove
diff --git a/lib_blackfin/memset.S b/lib_blackfin/memset.S
deleted file mode 100644
index 26f63cd..0000000
--- a/lib_blackfin/memset.S
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * File: memset.S
- *
- * Copyright 2004-2007 Analog Devices Inc.
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-.align 2
-
-/*
- * C Library function MEMSET
- * R0 = address (leave unchanged to form result)
- * R1 = filler byte
- * R2 = count
- * Favours word aligned data.
- */
-
-.globl _memset;
-.type _memset, STT_FUNC;
-_memset:
-	P0 = R0 ;              /* P0 = address */
-	P2 = R2 ;              /* P2 = count   */
-	R3 = R0 + R2;          /* end          */
-	CC = R2 <= 7(IU);
-	IF CC JUMP  .Ltoo_small;
-	R1 = R1.B (Z);         /* R1 = fill char */
-	R2 =  3;
-	R2 = R0 & R2;          /* addr bottom two bits */
-	CC =  R2 == 0;             /* AZ set if zero.	*/
-	IF !CC JUMP  .Lforce_align ;  /* Jump if addr not aligned. */
-
-.Laligned:
-	P1 = P2 >> 2;          /* count = n/4        */
-	R2 = R1 <<  8;         /* create quad filler */
-	R2.L = R2.L + R1.L(NS);
-	R2.H = R2.L + R1.H(NS);
-	P2 = R3;
-
-	LSETUP (.Lquad_loop , .Lquad_loop) LC0=P1;
-.Lquad_loop:
-	[P0++] = R2;
-
-	CC = P0 == P2;
-	IF !CC JUMP .Lbytes_left;
-	RTS;
-
-.Lbytes_left:
-	R2 = R3;                /* end point */
-	R3 = P0;                /* current position */
-	R2 = R2 - R3;           /* bytes left */
-	P2 = R2;
-
-.Ltoo_small:
-	CC = P2 == 0;           /* Check zero count */
-	IF CC JUMP .Lfinished;    /* Unusual */
-
-.Lbytes:
-	LSETUP (.Lbyte_loop , .Lbyte_loop) LC0=P2;
-.Lbyte_loop:
-	B[P0++] = R1;
-
-.Lfinished:
-	RTS;
-
-.Lforce_align:
-	CC = BITTST (R0, 0);  /* odd byte */
-	R0 = 4;
-	R0 = R0 - R2;
-	P1 = R0;
-	R0 = P0;		    /* Recover return address */
-	IF !CC JUMP .Lskip1;
-	B[P0++] = R1;
-.Lskip1:
-	CC = R2 <= 2;          /* 2 bytes */
-	P2 -= P1;              /* reduce count */
-	IF !CC JUMP .Laligned;
-	B[P0++] = R1;
-	B[P0++] = R1;
-	JUMP .Laligned;
-
-.size _memset, .-_memset
diff --git a/lib_blackfin/muldi3.c b/lib_blackfin/muldi3.c
deleted file mode 100644
index bf1ca53..0000000
--- a/lib_blackfin/muldi3.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * U-boot - muldi3.c contains routines for mult and div
- *
- * Copyright (c) 2005-2007 Analog Devices Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-/* Generic function got from GNU gcc package, libgcc2.c */
-#ifndef SI_TYPE_SIZE
-#define SI_TYPE_SIZE 32
-#endif
-#define __ll_B (1L << (SI_TYPE_SIZE / 2))
-#define __ll_lowpart(t) ((USItype) (t) % __ll_B)
-#define __ll_highpart(t) ((USItype) (t) / __ll_B)
-#define BITS_PER_UNIT 8
-
-#if !defined (umul_ppmm)
-#define umul_ppmm(w1, w0, u, v)						\
-do {									\
-	USItype __x0, __x1, __x2, __x3;					\
-	USItype __ul, __vl, __uh, __vh;					\
-									\
-	__ul = __ll_lowpart (u);					\
-	__uh = __ll_highpart (u);					\
-	__vl = __ll_lowpart (v);					\
-	__vh = __ll_highpart (v);					\
-									\
-	__x0 = (USItype) __ul * __vl;					\
-	__x1 = (USItype) __ul * __vh;					\
-	__x2 = (USItype) __uh * __vl;					\
-	__x3 = (USItype) __uh * __vh;					\
-									\
-	__x1 += __ll_highpart (__x0);/* this can't give carry */	\
-	__x1 += __x2;	/* but this indeed can */			\
-	if (__x1 < __x2)	/* did we get it? */			\
-		__x3 += __ll_B;	/* yes, add it in the proper pos. */	\
-									\
-	(w1) = __x3 + __ll_highpart (__x1);				\
-	(w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0);	\
-} while (0)
-#endif
-
-#if !defined (__umulsidi3)
-#define __umulsidi3(u, v)						\
-	({DIunion __w;							\
-	umul_ppmm (__w.s.high, __w.s.low, u, v);			\
-	__w.ll; })
-#endif
-
-typedef unsigned int USItype __attribute__ ((mode(SI)));
-typedef int SItype __attribute__ ((mode(SI)));
-typedef int DItype __attribute__ ((mode(DI)));
-typedef int word_type __attribute__ ((mode(__word__)));
-
-struct DIstruct {
-	SItype low, high;
-};
-typedef union {
-	struct DIstruct s;
-	DItype ll;
-} DIunion;
-
-DItype __muldi3(DItype u, DItype v)
-{
-	DIunion w;
-	DIunion uu, vv;
-
-	uu.ll = u, vv.ll = v;
-	/*  panic("kernel panic for __muldi3"); */
-	w.ll = __umulsidi3(uu.s.low, vv.s.low);
-	w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high
-		     + (USItype) uu.s.high * (USItype) vv.s.low);
-
-	return w.ll;
-}
diff --git a/lib_blackfin/outs.S b/lib_blackfin/outs.S
deleted file mode 100644
index 90c6033..0000000
--- a/lib_blackfin/outs.S
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Implementation of outs{bwl} for BlackFin processors using zero overhead loops.
- *
- * Copyright 2005-2009 Analog Devices Inc.
- *                2005 BuyWays BV
- *                      Bas Vermeulen <bas@buyways.nl>
- *
- * Licensed under the GPL-2.
- */
-
-#include <asm/linkage.h>
-
-.align 2
-
-ENTRY(_outsl)
-	P0 = R0;	/* P0 = port */
-	P1 = R1;	/* P1 = address */
-	P2 = R2;	/* P2 = count */
-
-	LSETUP( .Llong_loop_s, .Llong_loop_e) LC0 = P2;
-.Llong_loop_s: R0 = [P1++];
-.Llong_loop_e: [P0] = R0;
-	RTS;
-ENDPROC(_outsl)
-
-ENTRY(_outsw)
-	P0 = R0;	/* P0 = port */
-	P1 = R1;	/* P1 = address */
-	P2 = R2;	/* P2 = count */
-
-	LSETUP( .Lword_loop_s, .Lword_loop_e) LC0 = P2;
-.Lword_loop_s: R0 = W[P1++];
-.Lword_loop_e: W[P0] = R0;
-	RTS;
-ENDPROC(_outsw)
-
-ENTRY(_outsb)
-	P0 = R0;	/* P0 = port */
-	P1 = R1;	/* P1 = address */
-	P2 = R2;	/* P2 = count */
-
-	LSETUP( .Lbyte_loop_s, .Lbyte_loop_e) LC0 = P2;
-.Lbyte_loop_s: R0 = B[P1++];
-.Lbyte_loop_e: B[P0] = R0;
-	RTS;
-ENDPROC(_outsb)
-
-ENTRY(_outsw_8)
-	P0 = R0;	/* P0 = port */
-	P1 = R1;	/* P1 = address */
-	P2 = R2;	/* P2 = count */
-
-	LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2;
-.Lword8_loop_s: R1 = B[P1++];
-		R0 = B[P1++];
-		R0 = R0 << 8;
-		R0 = R0 + R1;
-.Lword8_loop_e: W[P0] = R0;
-	RTS;
-ENDPROC(_outsw_8)
diff --git a/lib_blackfin/post.c b/lib_blackfin/post.c
deleted file mode 100644
index faf6b96..0000000
--- a/lib_blackfin/post.c
+++ /dev/null
@@ -1,421 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <stdio_dev.h>
-#include <watchdog.h>
-#include <post.h>
-
-#ifdef CONFIG_LOGBUFFER
-#include <logbuff.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define POST_MAX_NUMBER		32
-
-#define BOOTMODE_MAGIC	0xDEAD0000
-
-int post_init_f(void)
-{
-	int res = 0;
-	unsigned int i;
-
-	for (i = 0; i < post_list_size; i++) {
-		struct post_test *test = post_list + i;
-
-		if (test->init_f && test->init_f()) {
-			res = -1;
-		}
-	}
-
-	gd->post_init_f_time = post_time_ms(0);
-	if (!gd->post_init_f_time) {
-		printf
-		    ("post/post.c: post_time_ms seems not to be implemented\n");
-	}
-
-	return res;
-}
-
-void post_bootmode_init(void)
-{
-	int bootmode = post_bootmode_get(0);
-	int newword;
-
-	if (post_hotkeys_pressed() && !(bootmode & POST_POWERTEST)) {
-		newword = BOOTMODE_MAGIC | POST_SLOWTEST;
-	} else if (bootmode == 0) {
-		newword = BOOTMODE_MAGIC | POST_POWERON;
-	} else if (bootmode == POST_POWERON || bootmode == POST_SLOWTEST) {
-		newword = BOOTMODE_MAGIC | POST_NORMAL;
-	} else {
-		/* Use old value */
-		newword = post_word_load() & ~POST_COLDBOOT;
-	}
-
-	if (bootmode == 0) {
-		/* We are booting after power-on */
-		newword |= POST_COLDBOOT;
-	}
-
-	post_word_store(newword);
-
-	/* Reset activity record */
-	gd->post_log_word = 0;
-}
-
-int post_bootmode_get(unsigned int *last_test)
-{
-	unsigned long word = post_word_load();
-	int bootmode;
-
-	if ((word & 0xFFFF0000) != BOOTMODE_MAGIC) {
-		return 0;
-	}
-
-	bootmode = word & 0x7F;
-
-	if (last_test && (bootmode & POST_POWERTEST)) {
-		*last_test = (word >> 8) & 0xFF;
-	}
-
-	return bootmode;
-}
-
-/* POST tests run before relocation only mark status bits .... */
-static void post_log_mark_start(unsigned long testid)
-{
-	gd->post_log_word |= (testid) << 16;
-}
-
-static void post_log_mark_succ(unsigned long testid)
-{
-	gd->post_log_word |= testid;
-}
-
-/* ... and the messages are output once we are relocated */
-void post_output_backlog(void)
-{
-	int j;
-
-	for (j = 0; j < post_list_size; j++) {
-		if (gd->post_log_word & (post_list[j].testid << 16)) {
-			post_log("POST %s ", post_list[j].cmd);
-			if (gd->post_log_word & post_list[j].testid)
-				post_log("PASSED\n");
-			else {
-				post_log("FAILED\n");
-				show_boot_progress (-31);
-			}
-		}
-	}
-}
-
-static void post_bootmode_test_on(unsigned int last_test)
-{
-	unsigned long word = post_word_load();
-
-	word |= POST_POWERTEST;
-
-	word |= (last_test & 0xFF) << 8;
-
-	post_word_store(word);
-}
-
-static void post_bootmode_test_off(void)
-{
-	unsigned long word = post_word_load();
-
-	word &= ~POST_POWERTEST;
-
-	post_word_store(word);
-}
-
-static void post_get_flags(int *test_flags)
-{
-	int flag[] = { POST_POWERON, POST_NORMAL, POST_SLOWTEST };
-	char *var[] = { "post_poweron", "post_normal", "post_slowtest" };
-	int varnum = sizeof(var) / sizeof(var[0]);
-	char list[128];		/* long enough for POST list */
-	char *name;
-	char *s;
-	int last;
-	int i, j;
-
-	for (j = 0; j < post_list_size; j++) {
-		test_flags[j] = post_list[j].flags;
-	}
-
-	for (i = 0; i < varnum; i++) {
-		if (getenv_r(var[i], list, sizeof(list)) <= 0)
-			continue;
-
-		for (j = 0; j < post_list_size; j++) {
-			test_flags[j] &= ~flag[i];
-		}
-
-		last = 0;
-		name = list;
-		while (!last) {
-			while (*name && *name == ' ')
-				name++;
-			if (*name == 0)
-				break;
-			s = name + 1;
-			while (*s && *s != ' ')
-				s++;
-			if (*s == 0)
-				last = 1;
-			else
-				*s = 0;
-
-			for (j = 0; j < post_list_size; j++) {
-				if (strcmp(post_list[j].cmd, name) == 0) {
-					test_flags[j] |= flag[i];
-					break;
-				}
-			}
-
-			if (j == post_list_size) {
-				printf("No such test: %s\n", name);
-			}
-
-			name = s + 1;
-		}
-	}
-
-	for (j = 0; j < post_list_size; j++) {
-		if (test_flags[j] & POST_POWERON) {
-			test_flags[j] |= POST_SLOWTEST;
-		}
-	}
-}
-
-static int post_run_single(struct post_test *test,
-			   int test_flags, int flags, unsigned int i)
-{
-	if ((flags & test_flags & POST_ALWAYS) &&
-	    (flags & test_flags & POST_MEM)) {
-		WATCHDOG_RESET();
-
-		if (!(flags & POST_REBOOT)) {
-			if ((test_flags & POST_REBOOT)
-			    && !(flags & POST_MANUAL)) {
-				post_bootmode_test_on(i);
-			}
-
-			if (test_flags & POST_PREREL)
-				post_log_mark_start(test->testid);
-			else
-				post_log("POST %s ", test->cmd);
-		}
-
-		if (test_flags & POST_PREREL) {
-			if ((*test->test) (flags) == 0)
-				post_log_mark_succ(test->testid);
-		} else {
-			if ((*test->test) (flags) != 0) {
-				post_log("FAILED\n");
-				show_boot_progress (-32);
-			} else
-				post_log("PASSED\n");
-		}
-
-		if ((test_flags & POST_REBOOT) && !(flags & POST_MANUAL)) {
-			post_bootmode_test_off();
-		}
-
-		return 0;
-	} else {
-		return -1;
-	}
-}
-
-int post_run(char *name, int flags)
-{
-	unsigned int i;
-	int test_flags[POST_MAX_NUMBER];
-
-	post_get_flags(test_flags);
-
-	if (name == NULL) {
-		unsigned int last;
-
-		if (post_bootmode_get(&last) & POST_POWERTEST) {
-			if (last < post_list_size &&
-			    (flags & test_flags[last] & POST_ALWAYS) &&
-			    (flags & test_flags[last] & POST_MEM)) {
-
-				post_run_single(post_list + last,
-						test_flags[last],
-						flags | POST_REBOOT, last);
-
-				for (i = last + 1; i < post_list_size; i++) {
-					post_run_single(post_list + i,
-							test_flags[i],
-							flags, i);
-				}
-			}
-		} else {
-			for (i = 0; i < post_list_size; i++) {
-				post_run_single(post_list + i,
-						test_flags[i], flags, i);
-			}
-		}
-
-		return 0;
-	} else {
-		for (i = 0; i < post_list_size; i++) {
-			if (strcmp(post_list[i].cmd, name) == 0)
-				break;
-		}
-
-		if (i < post_list_size) {
-			return post_run_single(post_list + i,
-					       test_flags[i], flags, i);
-		} else {
-			return -1;
-		}
-	}
-}
-
-static int post_info_single(struct post_test *test, int full)
-{
-	if (test->flags & POST_MANUAL) {
-		if (full)
-			printf("%s - %s\n"
-			       "  %s\n", test->cmd, test->name, test->desc);
-		else
-			printf("  %-15s - %s\n", test->cmd, test->name);
-
-		return 0;
-	} else {
-		return -1;
-	}
-}
-
-int post_info(char *name)
-{
-	unsigned int i;
-
-	if (name == NULL) {
-		for (i = 0; i < post_list_size; i++) {
-			post_info_single(post_list + i, 0);
-		}
-
-		return 0;
-	} else {
-		for (i = 0; i < post_list_size; i++) {
-			if (strcmp(post_list[i].cmd, name) == 0)
-				break;
-		}
-
-		if (i < post_list_size) {
-			return post_info_single(post_list + i, 1);
-		} else {
-			return -1;
-		}
-	}
-}
-
-int post_log(char *format, ...)
-{
-	va_list args;
-	uint i;
-	char printbuffer[CONFIG_SYS_PBSIZE];
-
-	va_start(args, format);
-
-	/* For this to work, printbuffer must be larger than
-	 * anything we ever want to print.
-	 */
-	i = vsprintf(printbuffer, format, args);
-	va_end(args);
-
-#ifdef CONFIG_LOGBUFFER
-	/* Send to the logbuffer */
-	logbuff_log(printbuffer);
-#else
-	/* Send to the stdout file */
-	puts(printbuffer);
-#endif
-
-	return 0;
-}
-
-void post_reloc(void)
-{
-	unsigned int i;
-
-	/*
-	 * We have to relocate the test table manually
-	 */
-	for (i = 0; i < post_list_size; i++) {
-		ulong addr;
-		struct post_test *test = post_list + i;
-
-		if (test->name) {
-			addr = (ulong) (test->name) + gd->reloc_off;
-			test->name = (char *)addr;
-		}
-
-		if (test->cmd) {
-			addr = (ulong) (test->cmd) + gd->reloc_off;
-			test->cmd = (char *)addr;
-		}
-
-		if (test->desc) {
-			addr = (ulong) (test->desc) + gd->reloc_off;
-			test->desc = (char *)addr;
-		}
-
-		if (test->test) {
-			addr = (ulong) (test->test) + gd->reloc_off;
-			test->test = (int (*)(int flags))addr;
-		}
-
-		if (test->init_f) {
-			addr = (ulong) (test->init_f) + gd->reloc_off;
-			test->init_f = (int (*)(void))addr;
-		}
-
-		if (test->reloc) {
-			addr = (ulong) (test->reloc) + gd->reloc_off;
-			test->reloc = (void (*)(void))addr;
-
-			test->reloc();
-		}
-	}
-}
-
-/*
- * Some tests (e.g. SYSMON) need the time when post_init_f started,
- * but we cannot use get_timer() at this point.
- *
- * On PowerPC we implement it using the timebase register.
- */
-unsigned long post_time_ms(unsigned long base)
-{
-	return (unsigned long)get_ticks() / (get_tbclk() / CONFIG_SYS_HZ) - base;
-}
diff --git a/lib_blackfin/string.c b/lib_blackfin/string.c
deleted file mode 100644
index e344d3b..0000000
--- a/lib_blackfin/string.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- * U-boot - string.c Contains library routines.
- *
- * Copyright (c) 2005-2008 Analog Devices Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-#include <common.h>
-#include <config.h>
-#include <asm/blackfin.h>
-#include <asm/io.h>
-#include <asm/mach-common/bits/dma.h>
-
-char *strcpy(char *dest, const char *src)
-{
-	char *xdest = dest;
-	char temp = 0;
-
-	__asm__ __volatile__ (
-		"1:\t%2 = B [%1++] (Z);\n\t"
-		"B [%0++] = %2;\n\t"
-		"CC = %2;\n\t"
-		"if cc jump 1b (bp);\n"
-		: "=a"(dest), "=a"(src), "=d"(temp)
-		: "0"(dest), "1"(src), "2"(temp)
-		: "memory");
-
-	return xdest;
-}
-
-char *strncpy(char *dest, const char *src, size_t n)
-{
-	char *xdest = dest;
-	char temp = 0;
-
-	if (n == 0)
-		return xdest;
-
-	__asm__ __volatile__ (
-		"1:\t%3 = B [%1++] (Z);\n\t"
-		"B [%0++] = %3;\n\t"
-		"CC = %3;\n\t"
-		"if ! cc jump 2f;\n\t"
-		"%2 += -1;\n\t"
-		"CC = %2 == 0;\n\t"
-		"if ! cc jump 1b (bp);\n"
-		"2:\n"
-		: "=a"(dest), "=a"(src), "=da"(n), "=d"(temp)
-		: "0"(dest), "1"(src), "2"(n), "3"(temp)
-		: "memory");
-
-	return xdest;
-}
-
-int strcmp(const char *cs, const char *ct)
-{
-	char __res1, __res2;
-
-	__asm__ (
-		"1:\t%2 = B[%0++] (Z);\n\t"	/* get *cs */
-		"%3 = B[%1++] (Z);\n\t"	/* get *ct */
-		"CC = %2 == %3;\n\t"	/* compare a byte */
-		"if ! cc jump 2f;\n\t"	/* not equal, break out */
-		"CC = %2;\n\t"	/* at end of cs? */
-		"if cc jump 1b (bp);\n\t"	/* no, keep going */
-		"jump.s 3f;\n"	/* strings are equal */
-		"2:\t%2 = %2 - %3;\n"	/* *cs - *ct */
-		"3:\n"
-		: "=a"(cs), "=a"(ct), "=d"(__res1), "=d"(__res2)
-		: "0"(cs), "1"(ct));
-
-	return __res1;
-}
-
-int strncmp(const char *cs, const char *ct, size_t count)
-{
-	char __res1, __res2;
-
-	if (!count)
-		return 0;
-
-	__asm__(
-		"1:\t%3 = B[%0++] (Z);\n\t"	/* get *cs */
-		"%4 = B[%1++] (Z);\n\t"	/* get *ct */
-		"CC = %3 == %4;\n\t"	/* compare a byte */
-		"if ! cc jump 3f;\n\t"	/* not equal, break out */
-		"CC = %3;\n\t"	/* at end of cs? */
-		"if ! cc jump 4f;\n\t"	/* yes, all done */
-		"%2 += -1;\n\t"	/* no, adjust count */
-		"CC = %2 == 0;\n\t" "if ! cc jump 1b;\n"	/* more to do, keep going */
-		"2:\t%3 = 0;\n\t"	/* strings are equal */
-		"jump.s    4f;\n" "3:\t%3 = %3 - %4;\n"	/* *cs - *ct */
-		"4:"
-		: "=a"(cs), "=a"(ct), "=da"(count), "=d"(__res1), "=d"(__res2)
-		: "0"(cs), "1"(ct), "2"(count));
-
-	return __res1;
-}
-
-#ifdef bfin_write_MDMA1_D0_IRQ_STATUS
-# define bfin_write_MDMA_D0_IRQ_STATUS bfin_write_MDMA1_D0_IRQ_STATUS
-# define bfin_write_MDMA_D0_START_ADDR bfin_write_MDMA1_D0_START_ADDR
-# define bfin_write_MDMA_D0_X_COUNT    bfin_write_MDMA1_D0_X_COUNT
-# define bfin_write_MDMA_D0_X_MODIFY   bfin_write_MDMA1_D0_X_MODIFY
-# define bfin_write_MDMA_D0_CONFIG     bfin_write_MDMA1_D0_CONFIG
-# define bfin_write_MDMA_S0_START_ADDR bfin_write_MDMA1_S0_START_ADDR
-# define bfin_write_MDMA_S0_X_COUNT    bfin_write_MDMA1_S0_X_COUNT
-# define bfin_write_MDMA_S0_X_MODIFY   bfin_write_MDMA1_S0_X_MODIFY
-# define bfin_write_MDMA_S0_CONFIG     bfin_write_MDMA1_S0_CONFIG
-# define bfin_write_MDMA_D0_IRQ_STATUS bfin_write_MDMA1_D0_IRQ_STATUS
-# define bfin_read_MDMA_D0_IRQ_STATUS  bfin_read_MDMA1_D0_IRQ_STATUS
-#endif
-/* This version misbehaves for count values of 0 and 2^16+.
- * Perhaps we should detect that ?  Nowhere do we actually
- * use dma memcpy for those types of lengths though ...
- */
-void dma_memcpy_nocache(void *dst, const void *src, size_t count)
-{
-	uint16_t wdsize, mod;
-
-	/* Disable DMA in case it's still running (older u-boot's did not
-	 * always turn them off).  Do it before the if statement below so
-	 * we can be cheap and not do a SSYNC() due to the forced abort.
-	 */
-	bfin_write_MDMA_D0_CONFIG(0);
-	bfin_write_MDMA_S0_CONFIG(0);
-	bfin_write_MDMA_D0_IRQ_STATUS(DMA_RUN | DMA_DONE | DMA_ERR);
-
-	/* Scratchpad cannot be a DMA source or destination */
-	if (((unsigned long)src >= L1_SRAM_SCRATCH &&
-	     (unsigned long)src < L1_SRAM_SCRATCH_END) ||
-	    ((unsigned long)dst >= L1_SRAM_SCRATCH &&
-	     (unsigned long)dst < L1_SRAM_SCRATCH_END))
-		hang();
-
-	if (((unsigned long)dst | (unsigned long)src | count) & 0x1) {
-		wdsize = WDSIZE_8;
-		mod = 1;
-	} else if (((unsigned long)dst | (unsigned long)src | count) & 0x2) {
-		wdsize = WDSIZE_16;
-		count >>= 1;
-		mod = 2;
-	} else {
-		wdsize = WDSIZE_32;
-		count >>= 2;
-		mod = 4;
-	}
-
-	/* Copy sram functions from sdram to sram */
-	/* Setup destination start address */
-	bfin_write_MDMA_D0_START_ADDR(dst);
-	/* Setup destination xcount */
-	bfin_write_MDMA_D0_X_COUNT(count);
-	/* Setup destination xmodify */
-	bfin_write_MDMA_D0_X_MODIFY(mod);
-
-	/* Setup Source start address */
-	bfin_write_MDMA_S0_START_ADDR(src);
-	/* Setup Source xcount */
-	bfin_write_MDMA_S0_X_COUNT(count);
-	/* Setup Source xmodify */
-	bfin_write_MDMA_S0_X_MODIFY(mod);
-
-	/* Enable source DMA */
-	bfin_write_MDMA_S0_CONFIG(wdsize | DMAEN);
-	bfin_write_MDMA_D0_CONFIG(wdsize | DMAEN | WNR | DI_EN);
-	SSYNC();
-
-	while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE))
-		continue;
-
-	bfin_write_MDMA_D0_IRQ_STATUS(DMA_RUN | DMA_DONE | DMA_ERR);
-	bfin_write_MDMA_D0_CONFIG(0);
-	bfin_write_MDMA_S0_CONFIG(0);
-}
-/* We should do a dcache invalidate on the destination after the dma, but since
- * we lack such hardware capability, we'll flush/invalidate the destination
- * before the dma and bank on the idea that u-boot is single threaded.
- */
-void *dma_memcpy(void *dst, const void *src, size_t count)
-{
-	if (dcache_status()) {
-		blackfin_dcache_flush_range(src, src + count);
-		blackfin_dcache_flush_invalidate_range(dst, dst + count);
-	}
-
-	dma_memcpy_nocache(dst, src, count);
-
-	if (icache_status())
-		blackfin_icache_flush_range(dst, dst + count);
-
-	return dst;
-}
-
-/*
- * memcpy - Copy one area of memory to another
- * @dest: Where to copy to
- * @src: Where to copy from
- * @count: The size of the area.
- *
- * We need to have this wrapper in memcpy() as common code may call memcpy()
- * to load up L1 regions.  Consider loading an ELF which has sections with
- * LMA's pointing to L1.  The common code ELF loader will simply use memcpy()
- * to move the ELF's sections into the right place.  We need to catch that
- * here and redirect to dma_memcpy().
- */
-extern void *memcpy_ASM(void *dst, const void *src, size_t count);
-void *memcpy(void *dst, const void *src, size_t count)
-{
-	if (!count)
-		return dst;
-
-#ifdef CONFIG_CMD_KGDB
-	if (src >= (void *)SYSMMR_BASE) {
-		if (count == 2 && (unsigned long)src % 2 == 0) {
-			u16 mmr = bfin_read16(src);
-			memcpy(dst, &mmr, sizeof(mmr));
-			return dst;
-		}
-		if (count == 4 && (unsigned long)src % 4 == 0) {
-			u32 mmr = bfin_read32(src);
-			memcpy(dst, &mmr, sizeof(mmr));
-			return dst;
-		}
-		/* Failed for some reason */
-		memset(dst, 0xad, count);
-		return dst;
-	}
-	if (dst >= (void *)SYSMMR_BASE) {
-		if (count == 2 && (unsigned long)dst % 2 == 0) {
-			u16 mmr;
-			memcpy(&mmr, src, sizeof(mmr));
-			bfin_write16(dst, mmr);
-			return dst;
-		}
-		if (count == 4 && (unsigned long)dst % 4 == 0) {
-			u32 mmr;
-			memcpy(&mmr, src, sizeof(mmr));
-			bfin_write32(dst, mmr);
-			return dst;
-		}
-		/* Failed for some reason */
-		memset(dst, 0xad, count);
-		return dst;
-	}
-#endif
-
-	/* if L1 is the source or dst, use DMA */
-	if (addr_bfin_on_chip_mem(dst) || addr_bfin_on_chip_mem(src))
-		return dma_memcpy(dst, src, count);
-	else
-		/* No L1 is involved, so just call regular memcpy */
-		return memcpy_ASM(dst, src, count);
-}
diff --git a/lib_blackfin/tests.c b/lib_blackfin/tests.c
deleted file mode 100644
index bf7fba0..0000000
--- a/lib_blackfin/tests.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Be sure to mark tests to be run before relocation as such with the
- * CONFIG_SYS_POST_PREREL flag so that logging is done correctly if the
- * logbuffer support is enabled.
- */
-
-#include <common.h>
-#include <config.h>
-
-#include <post.h>
-#define CONFIG_SYS_POST_FLASH  0x00004000
-#define CONFIG_SYS_POST_LED    0x00008000
-#define CONFIG_SYS_POST_BUTTON 0x00010000
-
-extern int cache_post_test(int flags);
-extern int watchdog_post_test(int flags);
-extern int i2c_post_test(int flags);
-extern int rtc_post_test(int flags);
-extern int memory_post_test(int flags);
-extern int cpu_post_test(int flags);
-extern int uart_post_test(int flags);
-extern int ether_post_test(int flags);
-extern int spi_post_test(int flags);
-extern int usb_post_test(int flags);
-extern int spr_post_test(int flags);
-extern int sysmon_post_test(int flags);
-extern int dsp_post_test(int flags);
-extern int codec_post_test(int flags);
-
-extern int sysmon_init_f(void);
-
-extern void sysmon_reloc(void);
-
-extern int flash_post_test(int flags);
-extern int led_post_test(int flags);
-extern int button_post_test(int flags);
-
-struct post_test post_list[] = {
-#if CONFIG_POST & CONFIG_SYS_POST_CACHE
-	{
-	 "Cache test",
-	 "cache",
-	 "This test verifies the CPU cache operation.",
-	 POST_RAM | POST_ALWAYS,
-	 &cache_post_test,
-	 NULL,
-	 NULL,
-	 CONFIG_SYS_POST_CACHE},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_WATCHDOG
-	{
-	 "Watchdog timer test",
-	 "watchdog",
-	 "This test checks the watchdog timer.",
-	 POST_RAM | POST_POWERON | POST_SLOWTEST | POST_MANUAL | POST_REBOOT,
-	 &watchdog_post_test,
-	 NULL,
-	 NULL,
-	 CONFIG_SYS_POST_WATCHDOG},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_I2C
-	{
-	 "I2C test",
-	 "i2c",
-	 "This test verifies the I2C operation.",
-	 POST_RAM | POST_ALWAYS,
-	 &i2c_post_test,
-	 NULL,
-	 NULL,
-	 CONFIG_SYS_POST_I2C},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_RTC
-	{
-	 "RTC test",
-	 "rtc",
-	 "This test verifies the RTC operation.",
-	 POST_RAM | POST_SLOWTEST | POST_MANUAL,
-	 &rtc_post_test,
-	 NULL,
-	 NULL,
-	 CONFIG_SYS_POST_RTC},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_MEMORY
-	{
-	 "Memory test",
-	 "memory",
-	 "This test checks RAM.",
-	 POST_ROM | POST_POWERON | POST_SLOWTEST | POST_PREREL,
-	 &memory_post_test,
-	 NULL,
-	 NULL,
-	 CONFIG_SYS_POST_MEMORY},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_CPU
-	{
-	 "CPU test",
-	 "cpu",
-	 "This test verifies the arithmetic logic unit of" " CPU.",
-	 POST_RAM | POST_ALWAYS,
-	 &cpu_post_test,
-	 NULL,
-	 NULL,
-	 CONFIG_SYS_POST_CPU},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_UART
-	{
-	 "UART test",
-	 "uart",
-	 "This test verifies the UART operation.",
-	 POST_RAM | POST_SLOWTEST | POST_MANUAL,
-	 &uart_post_test,
-	 NULL,
-	 NULL,
-	 CONFIG_SYS_POST_UART},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_ETHER
-	{
-	 "ETHERNET test",
-	 "ethernet",
-	 "This test verifies the ETHERNET operation.",
-	 POST_RAM | POST_ALWAYS | POST_MANUAL,
-	 &ether_post_test,
-	 NULL,
-	 NULL,
-	 CONFIG_SYS_POST_ETHER},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_SPI
-	{
-	 "SPI test",
-	 "spi",
-	 "This test verifies the SPI operation.",
-	 POST_RAM | POST_ALWAYS | POST_MANUAL,
-	 &spi_post_test,
-	 NULL,
-	 NULL,
-	 CONFIG_SYS_POST_SPI},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_USB
-	{
-	 "USB test",
-	 "usb",
-	 "This test verifies the USB operation.",
-	 POST_RAM | POST_ALWAYS | POST_MANUAL,
-	 &usb_post_test,
-	 NULL,
-	 NULL,
-	 CONFIG_SYS_POST_USB},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_SPR
-	{
-	 "SPR test",
-	 "spr",
-	 "This test checks SPR contents.",
-	 POST_ROM | POST_ALWAYS | POST_PREREL,
-	 &spr_post_test,
-	 NULL,
-	 NULL,
-	 CONFIG_SYS_POST_SPR},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_SYSMON
-	{
-	 "SYSMON test",
-	 "sysmon",
-	 "This test monitors system hardware.",
-	 POST_RAM | POST_ALWAYS,
-	 &sysmon_post_test,
-	 &sysmon_init_f,
-	 &sysmon_reloc,
-	 CONFIG_SYS_POST_SYSMON},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_DSP
-	{
-	 "DSP test",
-	 "dsp",
-	 "This test checks any connected DSP(s).",
-	 POST_RAM | POST_MANUAL,
-	 &dsp_post_test,
-	 NULL,
-	 NULL,
-	 CONFIG_SYS_POST_DSP},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_CODEC
-	{
-	 "CODEC test",
-	 "codec",
-	 "This test checks any connected codec(s).",
-	 POST_RAM | POST_MANUAL,
-	 &codec_post_test,
-	 NULL,
-	 NULL,
-	 CONFIG_SYS_POST_CODEC},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_FLASH
-	{
-	 "FLASH test",
-	 "flash",
-	 "This test checks flash.",
-	 POST_RAM | POST_ALWAYS | POST_MANUAL,
-	 &flash_post_test,
-	 NULL,
-	 NULL,
-	 CONFIG_SYS_POST_FLASH},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_LED
-	{
-	 "LED test",
-	 "LED",
-	 "This test checks LED ",
-	 POST_RAM | POST_ALWAYS | POST_MANUAL,
-	 &led_post_test,
-	 NULL,
-	 NULL,
-	 CONFIG_SYS_POST_LED},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_BUTTON
-	{
-	 "Button test",
-	 "button",
-	 "This test checks Button ",
-	 POST_RAM | POST_ALWAYS | POST_MANUAL,
-	 &button_post_test,
-	 NULL,
-	 NULL,
-	 CONFIG_SYS_POST_BUTTON},
-#endif
-
-};
-
-unsigned int post_list_size = sizeof(post_list) / sizeof(struct post_test);
diff --git a/lib_blackfin/u-boot.lds.S b/lib_blackfin/u-boot.lds.S
deleted file mode 100644
index 2b23d8b..0000000
--- a/lib_blackfin/u-boot.lds.S
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2010 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-
-#ifndef LDS_BOARD_TEXT
-# define LDS_BOARD_TEXT
-#endif
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error.  If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM      CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-/* The 0xC offset is so we don't clobber the tiny LDR jump block. */
-#ifdef CONFIG_BFIN_BOOTROM_USES_EVT1
-# define L1_CODE_ORIGIN L1_INST_SRAM
-#else
-# define L1_CODE_ORIGIN L1_INST_SRAM + 0xC
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
-#if CONFIG_MEM_SIZE
-	ram     : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
-# define ram_code ram
-# define ram_data ram
-#else
-# define ram_code l1_code
-# define ram_data l1_data
-#endif
-	l1_code : ORIGIN = L1_CODE_ORIGIN,          LENGTH = L1_INST_SRAM_SIZE
-	l1_data : ORIGIN = L1_DATA_B_SRAM,          LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
-	.text.pre :
-	{
-		cpu/blackfin/start.o (.text .text.*)
-
-		LDS_BOARD_TEXT
-	} >ram_code
-
-	.text.init :
-	{
-		cpu/blackfin/initcode.o (.text .text.*)
-	} >ram_code
-	__initcode_lma = LOADADDR(.text.init);
-	__initcode_len = SIZEOF(.text.init);
-
-	.text :
-	{
-		*(.text .text.*)
-	} >ram_code
-
-	.rodata :
-	{
-		. = ALIGN(4);
-		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-		. = ALIGN(4);
-	} >ram_data
-
-	.data :
-	{
-		. = ALIGN(4);
-		*(.data .data.*)
-		*(.data1)
-		*(.sdata)
-		*(.sdata2)
-		*(.dynamic)
-		CONSTRUCTORS
-	} >ram_data
-
-	.u_boot_cmd :
-	{
-		___u_boot_cmd_start = .;
-		*(.u_boot_cmd)
-		___u_boot_cmd_end = .;
-	} >ram_data
-
-	.text_l1 :
-	{
-		. = ALIGN(4);
-		__stext_l1 = .;
-		*(.l1.text)
-		. = ALIGN(4);
-		__etext_l1 = .;
-	} >l1_code AT>ram_code
-	__text_l1_lma = LOADADDR(.text_l1);
-	__text_l1_len = SIZEOF(.text_l1);
-	ASSERT (__text_l1_len <= L1_INST_SRAM_SIZE, "L1 text overflow!")
-
-	.data_l1 :
-	{
-		. = ALIGN(4);
-		__sdata_l1 = .;
-		*(.l1.data)
-		*(.l1.bss)
-		. = ALIGN(4);
-		__edata_l1 = .;
-	} >l1_data AT>ram_data
-	__data_l1_lma = LOADADDR(.data_l1);
-	__data_l1_len = SIZEOF(.data_l1);
-	ASSERT (__data_l1_len <= L1_DATA_B_SRAM_SIZE, "L1 data B overflow!")
-
-	.bss :
-	{
-		. = ALIGN(4);
-		*(.sbss) *(.scommon)
-		*(.dynbss)
-		*(.bss .bss.*)
-		*(COMMON)
-	} >ram_data
-	__bss_vma = ADDR(.bss);
-	__bss_len = SIZEOF(.bss);
-}