Merge branch 'fixes' into cleanups

Conflicts:

	board/atmel/atngw100/atngw100.c
	board/atmel/atstk1000/atstk1000.c
	cpu/at32ap/at32ap700x/gpio.c
	include/asm-avr32/arch-at32ap700x/clk.h
	include/configs/atngw100.h
	include/configs/atstk1002.h
	include/configs/atstk1003.h
	include/configs/atstk1004.h
	include/configs/atstk1006.h
	include/configs/favr-32-ezkit.h
	include/configs/hammerhead.h
	include/configs/mimc200.h

2 files changed, 19 insertions, 31 deletions

diff --git a/lib_arm/board.c b/lib_arm/board.c
index 5ade882..2358beb 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -42,6 +42,7 @@
 #include <command.h>
 #include <malloc.h>
 #include <devices.h>
+#include <timestamp.h>
 #include <version.h>
 #include <net.h>
 #include <serial.h>
@@ -69,7 +70,7 @@ extern void dataflash_print_info(void);
 #endif
 
 const char version_string[] =
-	U_BOOT_VERSION" (" __DATE__ " - " __TIME__ ")"CONFIG_IDENT_STRING;
+	U_BOOT_VERSION" (" U_BOOT_DATE " - " U_BOOT_TIME ")"CONFIG_IDENT_STRING;
 
 #ifdef CONFIG_DRIVER_CS8900
 extern void cs8900_get_enetaddr (uchar * addr);
@@ -95,7 +96,7 @@ static
 void mem_malloc_init (ulong dest_addr)
 {
 	mem_malloc_start = dest_addr;
-	mem_malloc_end = dest_addr + CFG_MALLOC_LEN;
+	mem_malloc_end = dest_addr + CONFIG_SYS_MALLOC_LEN;
 	mem_malloc_brk = mem_malloc_start;
 
 	memset ((void *) mem_malloc_start, 0,
@@ -202,36 +203,24 @@ static int display_dram_config (void)
 	return (0);
 }
 
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
 static void display_flash_config (ulong size)
 {
 	puts ("Flash: ");
 	print_size (size, "\n");
 }
-#endif /* CFG_NO_FLASH */
+#endif /* CONFIG_SYS_NO_FLASH */
 
 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
 static int init_func_i2c (void)
 {
 	puts ("I2C:   ");
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 	puts ("ready\n");
 	return (0);
 }
 #endif
 
-#ifdef CONFIG_SKIP_RELOCATE_UBOOT
-/*
- * This routine sets the relocation done flag, because even if
- * relocation is skipped, the flag is used by other generic code.
- */
-static int reloc_init(void)
-{
-	gd->flags |= GD_FLG_RELOC;
-	return 0;
-}
-#endif
-
 /*
  * Breathe some life into the board...
  *
@@ -261,11 +250,6 @@ int print_cpuinfo (void); /* test-only */
 
 init_fnc_t *init_sequence[] = {
 	cpu_init,		/* basic cpu dependent setup */
-#if defined(CONFIG_SKIP_RELOCATE_UBOOT)
-	reloc_init,		/* Set the relocation done flag, must
-				   do this AFTER cpu_init(), but as soon
-				   as possible */
-#endif
 	board_init,		/* basic board dependent setup */
 	interrupt_init,		/* set up exceptions */
 	env_init,		/* initialize environment */
@@ -291,7 +275,7 @@ void start_armboot (void)
 {
 	init_fnc_t **init_fnc_ptr;
 	char *s;
-#if !defined(CFG_NO_FLASH) || defined (CONFIG_VFD) || defined(CONFIG_LCD)
+#if !defined(CONFIG_SYS_NO_FLASH) || defined (CONFIG_VFD) || defined(CONFIG_LCD)
 	ulong size;
 #endif
 #if defined(CONFIG_VFD) || defined(CONFIG_LCD)
@@ -299,7 +283,7 @@ void start_armboot (void)
 #endif
 
 	/* Pointer is writable since we allocated a register for it */
-	gd = (gd_t*)(_armboot_start - CFG_MALLOC_LEN - sizeof(gd_t));
+	gd = (gd_t*)(_armboot_start - CONFIG_SYS_MALLOC_LEN - sizeof(gd_t));
 	/* compiler optimization barrier needed for GCC >= 3.4 */
 	__asm__ __volatile__("": : :"memory");
 
@@ -307,6 +291,8 @@ void start_armboot (void)
 	gd->bd = (bd_t*)((char*)gd - sizeof(bd_t));
 	memset (gd->bd, 0, sizeof (bd_t));
 
+	gd->flags |= GD_FLG_RELOC;
+
 	monitor_flash_len = _bss_start - _armboot_start;
 
 	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
@@ -315,11 +301,11 @@ void start_armboot (void)
 		}
 	}
 
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
 	/* configure available FLASH banks */
 	size = flash_init ();
 	display_flash_config (size);
-#endif /* CFG_NO_FLASH */
+#endif /* CONFIG_SYS_NO_FLASH */
 
 #ifdef CONFIG_VFD
 #	ifndef PAGE_SIZE
@@ -351,7 +337,7 @@ void start_armboot (void)
 #endif /* CONFIG_LCD */
 
 	/* armboot_start is defined in the board-specific linker script */
-	mem_malloc_init (_armboot_start - CFG_MALLOC_LEN);
+	mem_malloc_init (_armboot_start - CONFIG_SYS_MALLOC_LEN);
 
 #if defined(CONFIG_CMD_NAND)
 	puts ("NAND:  ");
@@ -513,7 +499,7 @@ int mdm_init (void)
 			serial_puts(init_str);
 			serial_puts("\n");
 			for(;;) {
-				mdm_readline(console_buffer, CFG_CBSIZE);
+				mdm_readline(console_buffer, CONFIG_SYS_CBSIZE);
 				dbg("ini%d: [%s]", i, console_buffer);
 
 				if ((strcmp(console_buffer, "OK") == 0) ||
@@ -537,7 +523,7 @@ int mdm_init (void)
 	/* final stage - wait for connect */
 	for(;i > 1;) { /* if 'i' > 1 - wait for connection
 				  message from modem */
-		mdm_readline(console_buffer, CFG_CBSIZE);
+		mdm_readline(console_buffer, CONFIG_SYS_CBSIZE);
 		dbg("ini_f: [%s]", console_buffer);
 		if (strncmp(console_buffer, "CONNECT", 7) == 0) {
 			dbg("ini_f: connected");
diff --git a/lib_arm/bootm.c b/lib_arm/bootm.c
index 6c2f37e..7dbde7d 100644
--- a/lib_arm/bootm.c
+++ b/lib_arm/bootm.c
@@ -62,12 +62,14 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 	char	*s;
 	int	machid = bd->bi_arch_number;
 	void	(*theKernel)(int zero, int arch, uint params);
-	int	ret;
 
 #ifdef CONFIG_CMDLINE_TAG
 	char *commandline = getenv ("bootargs");
 #endif
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 	theKernel = (void (*)(int, int, uint))images->ep;
 
 	s = getenv ("machid");
@@ -125,7 +127,7 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 
 	theKernel (0, machid, bd->bi_boot_params);
 	/* does not return */
-error:
+
 	return 1;
 }