Add support for PCS440EP board

Patch by Stefan Roese, 02 Jun 2006

2 files changed, 506 insertions, 43 deletions

diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
new file mode 100644
index 0000000..854809d
--- /dev/null
+++ b/include/configs/pcs440ep.h
@@ -0,0 +1,413 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * pcs440ep.h - configuration for PCS440EP board
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_PCS440EP		1	/* Board is PCS440EP            */
+#define CONFIG_440EP		1	/* Specific PPC440EP support    */
+#define CONFIG_4xx		1	/* ... PPC4xx family	        */
+#define CONFIG_SYS_CLK_FREQ	33333333    /* external freq to pll	*/
+
+#define CONFIG_BOARD_EARLY_INIT_F 1     /* Call board_early_init_f	*/
+#define CONFIG_MISC_INIT_R	1	/* call misc_init_r()		*/
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN		(512 * 1024)	/* Reserve 512 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
+#define CFG_MONITOR_BASE	(-CFG_MONITOR_LEN)
+#define CFG_SDRAM_BASE	        0x00000000	    /* _must_ be 0	*/
+#define CFG_FLASH_BASE	        0xfff00000	    /* start of FLASH	*/
+#define CFG_PCI_MEMBASE	        0xa0000000	    /* mapped pci memory*/
+#define CFG_PCI_MEMBASE1        CFG_PCI_MEMBASE  + 0x10000000
+#define CFG_PCI_MEMBASE2        CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3        CFG_PCI_MEMBASE2 + 0x10000000
+
+/*Don't change either of these*/
+#define CFG_PERIPHERAL_BASE     0xef600000	    /* internal peripherals*/
+#define CFG_PCI_BASE	        0xe0000000	    /* internal PCI regs*/
+/*Don't change either of these*/
+
+#define CFG_USB_DEVICE          0x50000000
+#define CFG_BOOT_BASE_ADDR      0xf0000000
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in SDRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_ADDR	0x70000000		/* DCache       */
+#define CFG_INIT_RAM_END	(8 << 10)
+#define CFG_GBL_DATA_SIZE	256			/* num bytes initial data*/
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef CFG_EXT_SERIAL_CLOCK		/* no external clk used		*/
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SERIAL_MULTI     1
+/*define this if you want console on UART1*/
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE  \
+    {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define CFG_FLASH_WORD_SIZE	unsigned char	/* flash word size (width)	*/
+#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	0x10000 	/* size of one complete sector	*/
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for setup             */
+#undef CONFIG_DDR_ECC			/* don't use ECC			*/
+#define SPD_EEPROM_ADDRESS      {0x50, 0x51}
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C		1	    /* I2C with hardware support	*/
+#undef	CONFIG_SOFT_I2C			    /* I2C bit-banged		*/
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"hostname=pcs440ep\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
+	        "bootm\0"						\
+	"rootpath=/opt/eldk/ppc_4xx\0"					\
+	"bootfile=/tftpboot/pcs440ep/uImage\0"				\
+	"kernel_addr=fff00000\0"					\
+	"ramdisk_addr=fff00000\0"					\
+	"load=tftp 100000 /tftpboot/pcs440ep/u-boot.bin\0"		\
+	"update=protect off fff80000 ffffffff;era fff80000 ffffffff;"	\
+		"cp.b 100000 fff80000 80000;"			        \
+		"setenv filesize;saveenv\0"				\
+	"upd=run load;run update\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#if 0
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
+#else
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+#endif
+
+#define CONFIG_BAUDRATE		115200
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+
+#define CONFIG_MII		1	/* MII PHY management		*/
+#define CONFIG_NET_MULTI        1	/* required for netconsole      */
+#define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"	*/
+#define CONFIG_PHY_ADDR		1	/* PHY address, See schematics	*/
+#define CONFIG_PHY1_ADDR        2
+
+#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_NETCONSOLE		/* include NetConsole support	*/
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#ifdef CONFIG_440EP
+/* USB */
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+/*Comment this out to enable USB 1.1 device*/
+#define USB_2_0_DEVICE
+#endif /*CONFIG_440EP*/
+
+#ifdef DEBUG
+#define CONFIG_PANIC_HANG
+#else
+#define CONFIG_HW_WATCHDOG			/* watchdog */
+#endif
+
+#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
+				CFG_CMD_ASKENV	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_DIAG	| \
+				CFG_CMD_ELF	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_IRQ	| \
+				CFG_CMD_MII	| \
+				CFG_CMD_NET	| \
+				CFG_CMD_NFS	| \
+				CFG_CMD_PCI	| \
+				CFG_CMD_PING	| \
+				CFG_CMD_REGINFO	| \
+				CFG_CMD_SDRAM	| \
+				CFG_CMD_EXT2	| \
+				CFG_CMD_FAT	| \
+				CFG_CMD_USB	)
+
+
+#define CONFIG_SUPPORT_VFAT
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	        16	/* max number of command args	*/
+#define CFG_BARGSIZE	        CFG_CBSIZE /* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0400000 /* memtest works on	        */
+#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+#define CONFIG_LYNXKDI          1       /* support kdi files            */
+
+#define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+/* General PCI */
+#define CONFIG_PCI			/* include pci support	        */
+#undef  CONFIG_PCI_PNP			/* do (not) pci plug-and-play   */
+#define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
+#define CFG_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT                /* enable board pci_pre_init()  */
+#define CFG_PCI_TARGET_INIT
+#define CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
+#define CFG_PCI_SUBSYS_ID       0xcafe	/* Whatever */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+#define FLASH_BASE0_PRELIM	0xFFF00000	/* FLASH bank #0	*/
+#define FLASH_BASE1_PRELIM	0xFFF80000	/* FLASH bank #1	*/
+
+#define CFG_FLASH		FLASH_BASE0_PRELIM
+#define CFG_SRAM		0xF1000000
+#define CFG_FPGA		0xF2000000
+#define CFG_CF1			0xF0000000
+#define CFG_CF2			0xF0100000
+
+/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization			*/
+#define CFG_EBC_PB0AP		0x02010000	/* TWT=4,OEN=1			*/
+#define CFG_EBC_PB0CR		(CFG_FLASH | 0x18000) /* BS=1MB,BU=R/W,BW=8bit	*/
+
+/* Memory Bank 1 (SRAM) initialization						*/
+#define CFG_EBC_PB1AP		0x01810040	/* TWT=3,OEN=1,BEM=1		*/
+#define CFG_EBC_PB1CR		(CFG_SRAM | 0x5A000) /* BS=4MB,BU=R/W,BW=16bit	*/
+
+/* Memory Bank 2 (FPGA) initialization						*/
+#define CFG_EBC_PB2AP		0x01010440	/* TWT=2,OEN=1,TH=2,BEM=1	*/
+#define CFG_EBC_PB2CR		(CFG_FPGA | 0x5A000) /* BS=4MB,BU=R/W,BW=16bit	*/
+
+/* Memory Bank 3 (CompactFlash) initialization					*/
+#define CFG_EBC_PB3AP		0x080BD400
+#define CFG_EBC_PB3CR		(CFG_CF1 | 0x1A000) /* BS=1MB,BU=R/W,BW=16bit	*/
+
+/* Memory Bank 4 (CompactFlash) initialization					*/
+#define CFG_EBC_PB4AP		0x080BD400
+#define CFG_EBC_PB4CR		(CFG_CF2 | 0x1A000) /* BS=1MB,BU=R/W,BW=16bit	*/
+
+/*-----------------------------------------------------------------------
+ * PPC440 GPIO Configuration
+ */
+#define CFG_440_GPIO_TABLE { /*		GPIO	Alternate1	Alternate2	Alternate3 */ \
+{											\
+/* GPIO Core 0 */									\
+{ GPIO0_BASE, GPIO_OUT, GPIO_SEL },  /* GPIO0	EBC_ADDR(7)	DMA_REQ(2)	*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_SEL },  /* GPIO1	EBC_ADDR(6)	DMA_ACK(2)	*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_SEL },  /* GPIO2	EBC_ADDR(5)	DMA_EOT/TC(2)	*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_SEL },  /* GPIO3	EBC_ADDR(4)	DMA_REQ(3)	*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_SEL },  /* GPIO4	EBC_ADDR(3)	DMA_ACK(3)	*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_SEL },  /* GPIO5	EBC_ADDR(2)	DMA_EOT/TC(3)	*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO6	EBC_CS_N(1)			*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO7	EBC_CS_N(2)			*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO8	EBC_CS_N(3)			*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO9	EBC_CS_N(4)			*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_SEL },  /* GPIO10	EBC_CS_N(5)			*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_SEL },  /* GPIO11	EBC_BUS_ERR			*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO12	ZII_p0Rxd(0)			*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO13	ZII_p0Rxd(1)			*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO14	ZII_p0Rxd(2)			*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO15	ZII_p0Rxd(3)			*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO16	ZII_p0Txd(0)			*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO17	ZII_p0Txd(1)			*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO18	ZII_p0Txd(2)			*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO19	ZII_p0Txd(3)			*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO20	ZII_p0Rx_er			*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO21	ZII_p0Rx_dv			*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO22	ZII_p0RxCrs			*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO23	ZII_p0Tx_er			*/	\
+{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO24	ZII_p0Tx_en			*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO25	ZII_p0Col			*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO26			USB2D_RXVALID	*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO27	EXT_EBC_REQ	USB2D_RXERROR	*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO28			USB2D_TXVALID	*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO29	EBC_EXT_HDLA	USB2D_PAD_SUSPNDM */	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO30	EBC_EXT_ACK	USB2D_XCVRSELECT*/	\
+{ GPIO0_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO31	EBC_EXR_BUSREQ	USB2D_TERMSELECT*/	\
+},											\
+{											\
+/* GPIO Core 1 */									\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO32	USB2D_OPMODE0			*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO33	USB2D_OPMODE1			*/	\
+{ GPIO1_BASE, GPIO_OUT, GPIO_ALT3 }, /* GPIO34	UART0_DCD_N	UART1_DSR_CTS_N	UART2_SOUT*/ \
+{ GPIO1_BASE, GPIO_IN,  GPIO_ALT3 }, /* GPIO35	UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
+{ GPIO1_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO36	UART0_8PIN_CTS_N		UART3_SIN*/ \
+{ GPIO1_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO37	UART0_RTS_N			*/	\
+{ GPIO1_BASE, GPIO_OUT, GPIO_ALT2 }, /* GPIO38	UART0_DTR_N	UART1_SOUT	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_ALT2 }, /* GPIO39	UART0_RI_N	UART1_SIN	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO40	UIC_IRQ(0)			*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO41	UIC_IRQ(1)			*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO42	UIC_IRQ(2)			*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO43	UIC_IRQ(3)			*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_ALT1 }, /* GPIO44	UIC_IRQ(4)	DMA_ACK(1)	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO45	UIC_IRQ(6)	DMA_EOT/TC(1)	*/	\
+{ GPIO1_BASE, GPIO_BI,  GPIO_SEL },  /* GPIO46	UIC_IRQ(7)	DMA_REQ(0)	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO47	UIC_IRQ(8)	DMA_ACK(0)	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO48	UIC_IRQ(9)	DMA_EOT/TC(0)	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO49  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO50  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO51  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO52  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO53  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO54  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO55  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO56  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO57  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO58  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO59  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO60  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO61  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO62  Unselect via TraceSelect Bit	*/	\
+{ GPIO1_BASE, GPIO_IN,  GPIO_SEL },  /* GPIO63  Unselect via TraceSelect Bit	*/	\
+}											\
+}
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE		(32<<10) /* For AMCC 440 CPUs			*/
+#define CFG_CACHELINE_SIZE	32	/* ...			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+#endif	/* __CONFIG_H */
diff --git a/include/ppc440.h b/include/ppc440.h
index 018f7be..53f14b5 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -1357,56 +1357,106 @@
 /******************************************************************************
  * GPIO macro register defines
  ******************************************************************************/
+#define GPIO0			0
+#define GPIO1			1
+
 #if defined(CONFIG_440GP)
-#define GPIO_BASE0             (CFG_PERIPHERAL_BASE+0x00000700)
+#define GPIO0_BASE             (CFG_PERIPHERAL_BASE+0x00000700)
 
-#define GPIO0_OR               (GPIO_BASE0+0x0)
-#define GPIO0_TCR              (GPIO_BASE0+0x4)
-#define GPIO0_ODR              (GPIO_BASE0+0x18)
-#define GPIO0_IR               (GPIO_BASE0+0x1C)
+#define GPIO0_OR               (GPIO0_BASE+0x0)
+#define GPIO0_TCR              (GPIO0_BASE+0x4)
+#define GPIO0_ODR              (GPIO0_BASE+0x18)
+#define GPIO0_IR               (GPIO0_BASE+0x1C)
 #endif /* CONFIG_440GP */
 
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR)
-#define GPIO_BASE0             (CFG_PERIPHERAL_BASE+0x00000B00)
-#define GPIO_BASE1             (CFG_PERIPHERAL_BASE+0x00000C00)
-
-#define GPIO0_OR               (GPIO_BASE0+0x0)
-#define GPIO0_TCR              (GPIO_BASE0+0x4)
-#define GPIO0_OSRL             (GPIO_BASE0+0x8)
-#define GPIO0_OSRH             (GPIO_BASE0+0xC)
-#define GPIO0_TSRL             (GPIO_BASE0+0x10)
-#define GPIO0_TSRH             (GPIO_BASE0+0x14)
-#define GPIO0_ODR              (GPIO_BASE0+0x18)
-#define GPIO0_IR               (GPIO_BASE0+0x1C)
-#define GPIO0_RR1              (GPIO_BASE0+0x20)
-#define GPIO0_RR2              (GPIO_BASE0+0x24)
-#define GPIO0_RR3	       (GPIO_BASE0+0x28)
-#define GPIO0_ISR1L            (GPIO_BASE0+0x30)
-#define GPIO0_ISR1H            (GPIO_BASE0+0x34)
-#define GPIO0_ISR2L            (GPIO_BASE0+0x38)
-#define GPIO0_ISR2H            (GPIO_BASE0+0x3C)
-#define GPIO0_ISR3L            (GPIO_BASE0+0x40)
-#define GPIO0_ISR3H            (GPIO_BASE0+0x44)
-
-#define GPIO1_OR               (GPIO_BASE1+0x0)
-#define GPIO1_TCR              (GPIO_BASE1+0x4)
-#define GPIO1_OSRL             (GPIO_BASE1+0x8)
-#define GPIO1_OSRH             (GPIO_BASE1+0xC)
-#define GPIO1_TSRL             (GPIO_BASE1+0x10)
-#define GPIO1_TSRH             (GPIO_BASE1+0x14)
-#define GPIO1_ODR              (GPIO_BASE1+0x18)
-#define GPIO1_IR               (GPIO_BASE1+0x1C)
-#define GPIO1_RR1              (GPIO_BASE1+0x20)
-#define GPIO1_RR2              (GPIO_BASE1+0x24)
-#define GPIO1_RR3              (GPIO_BASE1+0x28)
-#define GPIO1_ISR1L            (GPIO_BASE1+0x30)
-#define GPIO1_ISR1H            (GPIO_BASE1+0x34)
-#define GPIO1_ISR2L            (GPIO_BASE1+0x38)
-#define GPIO1_ISR2H            (GPIO_BASE1+0x3C)
-#define GPIO1_ISR3L            (GPIO_BASE1+0x40)
-#define GPIO1_ISR3H            (GPIO_BASE1+0x44)
+#define GPIO0_BASE             (CFG_PERIPHERAL_BASE+0x00000B00)
+#define GPIO1_BASE             (CFG_PERIPHERAL_BASE+0x00000C00)
+
+/* Offsets */
+#define GPIOx_OR    0x00	/* GPIO Output Register */
+#define GPIOx_TCR   0x04	/* GPIO Three-State Control Register */
+#define GPIOx_OSL   0x08	/* GPIO Output Select Register (Bits 0-31) */
+#define GPIOx_OSH   0x0C	/* GPIO Ouput Select Register (Bits 32-63) */
+#define GPIOx_TSL   0x10	/* GPIO Three-State Select Register (Bits 0-31) */
+#define GPIOx_TSH   0x14	/* GPIO Three-State Select Register  (Bits 32-63) */
+#define GPIOx_ODR   0x18	/* GPIO Open drain Register */
+#define GPIOx_IR    0x1C	/* GPIO Input Register */
+#define GPIOx_RR1   0x20	/* GPIO Receive Register 1 */
+#define GPIOx_RR2   0x24	/* GPIO Receive Register 2 */
+#define GPIOx_RR3   0x28	/* GPIO Receive Register 3 */
+#define GPIOx_IS1L  0x30	/* GPIO Input Select Register 1 (Bits 0-31) */
+#define GPIOx_IS1H  0x34	/* GPIO Input Select Register 1 (Bits 32-63) */
+#define GPIOx_IS2L  0x38	/* GPIO Input Select Register 2 (Bits 0-31) */
+#define GPIOx_IS2H  0x3C	/* GPIO Input Select Register 2 (Bits 32-63) */
+#define GPIOx_IS3L  0x40	/* GPIO Input Select Register 3 (Bits 0-31) */
+#define GPIOx_IS3H  0x44	/* GPIO Input Select Register 3 (Bits 32-63) */
+
+#define GPIO_OS(x)	(x+GPIOx_OSL)	/* GPIO Output Register High or Low */
+#define GPIO_TS(x)	(x+GPIOx_TSL)	/* GPIO Three-state Control Reg High or Low */
+#define GPIO_IS1(x)	(x+GPIOx_IS1L)	/* GPIO Input register1 High or Low */
+#define GPIO_IS2(x)	(x+GPIOx_IS2L)	/* GPIO Input register2 High or Low */
+#define GPIO_IS3(x)	(x+GPIOx_IS3L)	/* GPIO Input register3 High or Low */
+
+#define GPIO0_OR               (GPIO0_BASE+0x0)
+#define GPIO0_TCR              (GPIO0_BASE+0x4)
+#define GPIO0_OSRL             (GPIO0_BASE+0x8)
+#define GPIO0_OSRH             (GPIO0_BASE+0xC)
+#define GPIO0_TSRL             (GPIO0_BASE+0x10)
+#define GPIO0_TSRH             (GPIO0_BASE+0x14)
+#define GPIO0_ODR              (GPIO0_BASE+0x18)
+#define GPIO0_IR               (GPIO0_BASE+0x1C)
+#define GPIO0_RR1              (GPIO0_BASE+0x20)
+#define GPIO0_RR2              (GPIO0_BASE+0x24)
+#define GPIO0_RR3	       (GPIO0_BASE+0x28)
+#define GPIO0_ISR1L            (GPIO0_BASE+0x30)
+#define GPIO0_ISR1H            (GPIO0_BASE+0x34)
+#define GPIO0_ISR2L            (GPIO0_BASE+0x38)
+#define GPIO0_ISR2H            (GPIO0_BASE+0x3C)
+#define GPIO0_ISR3L            (GPIO0_BASE+0x40)
+#define GPIO0_ISR3H            (GPIO0_BASE+0x44)
+
+#define GPIO1_OR               (GPIO1_BASE+0x0)
+#define GPIO1_TCR              (GPIO1_BASE+0x4)
+#define GPIO1_OSRL             (GPIO1_BASE+0x8)
+#define GPIO1_OSRH             (GPIO1_BASE+0xC)
+#define GPIO1_TSRL             (GPIO1_BASE+0x10)
+#define GPIO1_TSRH             (GPIO1_BASE+0x14)
+#define GPIO1_ODR              (GPIO1_BASE+0x18)
+#define GPIO1_IR               (GPIO1_BASE+0x1C)
+#define GPIO1_RR1              (GPIO1_BASE+0x20)
+#define GPIO1_RR2              (GPIO1_BASE+0x24)
+#define GPIO1_RR3              (GPIO1_BASE+0x28)
+#define GPIO1_ISR1L            (GPIO1_BASE+0x30)
+#define GPIO1_ISR1H            (GPIO1_BASE+0x34)
+#define GPIO1_ISR2L            (GPIO1_BASE+0x38)
+#define GPIO1_ISR2H            (GPIO1_BASE+0x3C)
+#define GPIO1_ISR3L            (GPIO1_BASE+0x40)
+#define GPIO1_ISR3H            (GPIO1_BASE+0x44)
 #endif
 
+#define GPIO_GROUP_MAX	    2
+#define GPIO_MAX	    32
+#define GPIO_ALT1_SEL	    0x40000000	    /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 0 */
+#define GPIO_ALT2_SEL	    0x80000000	    /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 1 */
+#define GPIO_ALT3_SEL	    0xC0000000	    /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 2 */
+#define GPIO_MASK	    0xC0000000	    /* GPIO_MASK */
+#define GPIO_IN_SEL	    0x40000000	    /* GPIO_IN value put in GPIO_ISx for the GPIO nb 0 */
+					    /* For the other GPIO number, you must shift */
+
+#ifndef __ASSEMBLY__
+
+typedef enum gpio_select { GPIO_SEL, GPIO_ALT1, GPIO_ALT2, GPIO_ALT3 } gpio_select_t;
+typedef enum gpio_driver { GPIO_DIS, GPIO_IN, GPIO_OUT, GPIO_BI } gpio_driver_t;
+
+typedef struct { unsigned long	add;	/* gpio core base address */
+	gpio_driver_t  in_out; /* Driver Setting */
+	gpio_select_t  alt_nb; /* Selected Alternate */
+} gpio_param_s;
+
+
+#endif /* __ASSEMBLY__ */
+
 /*
  * Macros for accessing the indirect EBC registers
  */