Merge branch 'master' of /home/stefan/git/u-boot/u-boot into next

14 files changed, 18 insertions, 726 deletions

diff --git a/include/asm-m68k/timer.h b/include/asm-m68k/timer.h
index 030720c..1a5de05 100644
--- a/include/asm-m68k/timer.h
+++ b/include/asm-m68k/timer.h
@@ -33,7 +33,7 @@
 /****************************************************************************/
 /* DMA Timer module registers */
 typedef struct dtimer_ctrl {
-#if defined(CONFIG_M5249) || defined(CONFIG_M5253)
+#if defined(CONFIG_M5249) || defined(CONFIG_M5253) || defined(CONFIG_M5272)
 	u16 tmr;		/* 0x00 Mode register */
 	u16 res1;		/* 0x02 */
 	u16 trr;		/* 0x04 Reference register */
diff --git a/include/asm-microblaze/arch-microblaze/xbasic_types.h b/include/asm-microblaze/arch-microblaze/xbasic_types.h
deleted file mode 100644
index 25012e6..0000000
--- a/include/asm-microblaze/arch-microblaze/xbasic_types.h
+++ /dev/null
@@ -1,301 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2003 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xbasic_types.h
-*
-* This file contains basic types for Xilinx software IP.  These types do not
-* follow the standard naming convention with respect to using the component
-* name in front of each name because they are considered to be primitives.
-*
-* @note
-*
-* This file contains items which are architecture dependent.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver	 Who	Date	Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00a rmm  12/14/01 First release
-*	rmm  05/09/03 Added "xassert always" macros to rid ourselves of diab
-*		      compiler warnings
-* </pre>
-*
-******************************************************************************/
-
-#ifndef XBASIC_TYPES_H		/* prevent circular inclusions */
-#define XBASIC_TYPES_H		/* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-/************************** Constant Definitions *****************************/
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#ifndef NULL
-#define NULL 0
-#endif
-/** Null */
-
-#define XCOMPONENT_IS_READY	0x11111111	/* component has been initialized */
-#define XCOMPONENT_IS_STARTED	0x22222222	/* component has been started */
-
-/* the following constants and declarations are for unit test purposes and are
- * designed to be used in test applications.
- */
-#define XTEST_PASSED	0
-#define XTEST_FAILED	1
-
-#define XASSERT_NONE	 0
-#define XASSERT_OCCURRED 1
-
-extern unsigned int XAssertStatus;
-extern void XAssert(char *, int);
-
-/**************************** Type Definitions *******************************/
-
-/** @name Primitive types
- * These primitive types are created for transportability.
- * They are dependent upon the target architecture.
- * @{
- */
-#include <linux/types.h>
-
-typedef struct {
-	u32 Upper;
-	u32 Lower;
-} Xuint64;
-
-/* Xilinx's unsigned integer types */
-typedef u32 Xuint32;
-typedef u16 Xuint16;
-typedef u8 Xuint8;
-
-/* and signed integer types */
-typedef s32 Xint32;
-typedef s16 Xint16;
-typedef s8 Xint8;
-
-#ifndef NULL
-#define NULL 0
-#endif
-
-typedef unsigned long Xboolean;
-#define XNULL	NULL
-
-#define XTRUE	1
-#define XFALSE	0
-
-/*@}*/
-
-/**
- * This data type defines an interrupt handler for a device.
- * The argument points to the instance of the component
- */
-typedef void (*XInterruptHandler) (void *InstancePtr);
-
-/**
- * This data type defines a callback to be invoked when an
- * assert occurs. The callback is invoked only when asserts are enabled
- */
-typedef void (*XAssertCallback) (char *FilenamePtr, int LineNumber);
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/*****************************************************************************/
-/**
-* Return the most significant half of the 64 bit data type.
-*
-* @param x is the 64 bit word.
-*
-* @return
-*
-* The upper 32 bits of the 64 bit word.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XUINT64_MSW(x) ((x).Upper)
-
-/*****************************************************************************/
-/**
-* Return the least significant half of the 64 bit data type.
-*
-* @param x is the 64 bit word.
-*
-* @return
-*
-* The lower 32 bits of the 64 bit word.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XUINT64_LSW(x) ((x).Lower)
-
-#ifndef NDEBUG
-
-/*****************************************************************************/
-/**
-* This assert macro is to be used for functions that do not return anything
-* (void). This in conjunction with the XWaitInAssert boolean can be used to
-* accomodate tests so that asserts which fail allow execution to continue.
-*
-* @param expression is the expression to evaluate. If it evaluates to false,
-*	 the assert occurs.
-*
-* @return
-*
-* Returns void unless the XWaitInAssert variable is true, in which case
-* no return is made and an infinite loop is entered.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XASSERT_VOID(expression)			\
-{							\
-	if (expression) {				\
-		XAssertStatus = XASSERT_NONE;		\
-	} else {					\
-		XAssert(__FILE__, __LINE__);		\
-		XAssertStatus = XASSERT_OCCURRED;	\
-		return;					\
-	}						\
-}
-
-/*****************************************************************************/
-/**
-* This assert macro is to be used for functions that do return a value. This in
-* conjunction with the XWaitInAssert boolean can be used to accomodate tests so
-* that asserts which fail allow execution to continue.
-*
-* @param expression is the expression to evaluate. If it evaluates to false,
-*	 the assert occurs.
-*
-* @return
-*
-* Returns 0 unless the XWaitInAssert variable is true, in which case
-* no return is made and an infinite loop is entered.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XASSERT_NONVOID(expression)			\
-{							\
-	if (expression) {				\
-		XAssertStatus = XASSERT_NONE;		\
-	} else {					\
-		XAssert(__FILE__, __LINE__);		\
-		XAssertStatus = XASSERT_OCCURRED;	\
-		return 0;				\
-	}						\
-}
-
-/*****************************************************************************/
-/**
-* Always assert. This assert macro is to be used for functions that do not
-* return anything (void). Use for instances where an assert should always
-* occur.
-*
-* @return
-*
-* Returns void unless the XWaitInAssert variable is true, in which case
-* no return is made and an infinite loop is entered.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XASSERT_VOID_ALWAYS()				\
-{							\
-	XAssert(__FILE__, __LINE__);			\
-	XAssertStatus = XASSERT_OCCURRED;		\
-	return;						\
-}
-
-/*****************************************************************************/
-/**
-* Always assert. This assert macro is to be used for functions that do return
-* a value. Use for instances where an assert should always occur.
-*
-* @return
-*
-* Returns void unless the XWaitInAssert variable is true, in which case
-* no return is made and an infinite loop is entered.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XASSERT_NONVOID_ALWAYS()			\
-{							\
-	XAssert(__FILE__, __LINE__);			\
-	XAssertStatus = XASSERT_OCCURRED;		\
-	return 0;					\
-}
-
-#else
-
-#define XASSERT_VOID(expression)
-#define XASSERT_VOID_ALWAYS()
-#define XASSERT_NONVOID(expression)
-#define XASSERT_NONVOID_ALWAYS()
-#endif
-
-/************************** Function Prototypes ******************************/
-
-void XAssertSetCallback(XAssertCallback Routine);
-
-#endif	/* end of protection macro */
diff --git a/include/asm-microblaze/arch-microblaze/xio.h b/include/asm-microblaze/arch-microblaze/xio.h
deleted file mode 100644
index 7eed327..0000000
--- a/include/asm-microblaze/arch-microblaze/xio.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * xio.h
- *
- * Defines XIo functions for Xilinx OCP in terms of Linux primitives
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under the terms
- * of the GNU General Public License version 2.  This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#ifndef XIO_H
-#define XIO_H
-
-#include "xbasic_types.h"
-#include <asm/io.h>
-
-typedef u32 XIo_Address;
-
-extern inline u8
-XIo_In8(XIo_Address InAddress)
-{
-	return (u8) in_8((volatile unsigned char *) InAddress);
-}
-extern inline u16
-XIo_In16(XIo_Address InAddress)
-{
-	return (u16) in_be16((volatile unsigned short *) InAddress);
-}
-extern inline u32
-XIo_In32(XIo_Address InAddress)
-{
-	return (u32) in_be32((volatile unsigned *) InAddress);
-}
-extern inline void
-XIo_Out8(XIo_Address OutAddress, u8 Value)
-{
-	out_8((volatile unsigned char *) OutAddress, Value);
-}
-extern inline void
-XIo_Out16(XIo_Address OutAddress, u16 Value)
-{
-	out_be16((volatile unsigned short *) OutAddress, Value);
-}
-extern inline void
-XIo_Out32(XIo_Address OutAddress, u32 Value)
-{
-	out_be32((volatile unsigned *) OutAddress, Value);
-}
-
-#define XIo_ToLittleEndian16(s,d) (*(u16*)(d) = cpu_to_le16((u16)(s)))
-#define XIo_ToLittleEndian32(s,d) (*(u32*)(d) = cpu_to_le32((u32)(s)))
-#define XIo_ToBigEndian16(s,d) (*(u16*)(d) = cpu_to_be16((u16)(s)))
-#define XIo_ToBigEndian32(s,d) (*(u32*)(d) = cpu_to_be32((u32)(s)))
-
-#define XIo_FromLittleEndian16(s,d) (*(u16*)(d) = le16_to_cpu((u16)(s)))
-#define XIo_FromLittleEndian32(s,d) (*(u32*)(d) = le32_to_cpu((u32)(s)))
-#define XIo_FromBigEndian16(s,d) (*(u16*)(d) = be16_to_cpu((u16)(s)))
-#define XIo_FromBigEndian32(s,d) (*(u32*)(d) = be32_to_cpu((u32)(s)))
-
-#endif				/* XIO_H */
diff --git a/include/asm-microblaze/arch-microblaze/xuartlite_l.h b/include/asm-microblaze/arch-microblaze/xuartlite_l.h
deleted file mode 100644
index b381a0d..0000000
--- a/include/asm-microblaze/arch-microblaze/xuartlite_l.h
+++ /dev/null
@@ -1,256 +0,0 @@
-/*****************************************************************************
-*
-*	XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
-*	AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
-*	SOLUTIONS FOR XILINX DEVICES.  BY PROVIDING THIS DESIGN, CODE,
-*	OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
-*	APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
-*	THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
-*	AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
-*	FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY DISCLAIMS ANY
-*	WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
-*	IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
-*	REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
-*	INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-*	FOR A PARTICULAR PURPOSE.
-*
-*	(c) Copyright 2002 Xilinx Inc.
-*	All rights reserved.
-*
-*****************************************************************************/
-/****************************************************************************/
-/**
-*
-* @file xuartlite_l.h
-*
-* This header file contains identifiers and low-level driver functions (or
-* macros) that can be used to access the device.  High-level driver functions
-* are defined in xuartlite.h.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver	Who  Date     Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00b rpm  04/25/02 First release
-* </pre>
-*
-*****************************************************************************/
-
-#ifndef XUARTLITE_L_H /* prevent circular inclusions */
-#define XUARTLITE_L_H /* by using protection macros */
-
-/***************************** Include Files ********************************/
-
-#include "xbasic_types.h"
-#include "xio.h"
-
-/************************** Constant Definitions ****************************/
-
-/* UART Lite register offsets */
-
-#define XUL_RX_FIFO_OFFSET		0   /* receive FIFO, read only */
-#define XUL_TX_FIFO_OFFSET		4   /* transmit FIFO, write only */
-#define XUL_STATUS_REG_OFFSET		8   /* status register, read only */
-#define XUL_CONTROL_REG_OFFSET		12  /* control register, write only */
-
-/* control register bit positions */
-
-#define XUL_CR_ENABLE_INTR		0x10	/* enable interrupt */
-#define XUL_CR_FIFO_RX_RESET		0x02	/* reset receive FIFO */
-#define XUL_CR_FIFO_TX_RESET		0x01	/* reset transmit FIFO */
-
-/* status register bit positions */
-
-#define XUL_SR_PARITY_ERROR		0x80
-#define XUL_SR_FRAMING_ERROR		0x40
-#define XUL_SR_OVERRUN_ERROR		0x20
-#define XUL_SR_INTR_ENABLED		0x10	/* interrupt enabled */
-#define XUL_SR_TX_FIFO_FULL		0x08	/* transmit FIFO full */
-#define XUL_SR_TX_FIFO_EMPTY		0x04	/* transmit FIFO empty */
-#define XUL_SR_RX_FIFO_FULL		0x02	/* receive FIFO full */
-#define XUL_SR_RX_FIFO_VALID_DATA	0x01	/* data in receive FIFO */
-
-/* the following constant specifies the size of the FIFOs, the size of the
- * FIFOs includes the transmitter and receiver such that it is the total number
- * of bytes that the UART can buffer
- */
-#define XUL_FIFO_SIZE		    16
-
-/* Stop bits are fixed at 1. Baud, parity, and data bits are fixed on a
- * per instance basis
- */
-#define XUL_STOP_BITS		    1
-
-/* Parity definitions
- */
-#define XUL_PARITY_NONE		    0
-#define XUL_PARITY_ODD		    1
-#define XUL_PARITY_EVEN		    2
-
-/**************************** Type Definitions ******************************/
-
-/***************** Macros (Inline Functions) Definitions ********************/
-
-/*****************************************************************************
-*
-* Low-level driver macros and functions. The list below provides signatures
-* to help the user use the macros.
-*
-* void XUartLite_mSetControlReg(u32 BaseAddress, u32 Mask)
-* u32 XUartLite_mGetControlReg(u32 BaseAddress)
-* u32 XUartLite_mGetStatusReg(u32 BaseAddress)
-*
-* Xboolean XUartLite_mIsReceiveEmpty(u32 BaseAddress)
-* Xboolean XUartLite_mIsTransmitFull(u32 BaseAddress)
-* Xboolean XUartLite_mIsIntrEnabled(u32 BaseAddress)
-*
-* void XUartLite_mEnableIntr(u32 BaseAddress)
-* void XUartLite_mDisableIntr(u32 BaseAddress)
-*
-* void XUartLite_SendByte(u32 BaseAddress, u8 Data);
-* u8 XUartLite_RecvByte(u32 BaseAddress);
-*
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*
-* Set the contents of the control register. Use the XUL_CR_* constants defined
-* above to create the bit-mask to be written to the register.
-*
-* @param    BaseAddress is the base address of the device
-* @param    Mask is the 32-bit value to write to the control register
-*
-* @return   None.
-*
-* @note	    None.
-*
-*****************************************************************************/
-#define XUartLite_mSetControlReg(BaseAddress, Mask) \
-		    XIo_Out32((BaseAddress) + XUL_CONTROL_REG_OFFSET, (Mask))
-
-
-/****************************************************************************/
-/**
-*
-* Get the contents of the control register. Use the XUL_CR_* constants defined
-* above to interpret the bit-mask returned.
-*
-* @param    BaseAddress is the	base address of the device
-*
-* @return   A 32-bit value representing the contents of the control register.
-*
-* @note	    None.
-*
-*****************************************************************************/
-#define XUartLite_mGetControlReg(BaseAddress) \
-		    XIo_In32((BaseAddress) + XUL_CONTROL_REG_OFFSET)
-
-
-/****************************************************************************/
-/**
-*
-* Get the contents of the status register. Use the XUL_SR_* constants defined
-* above to interpret the bit-mask returned.
-*
-* @param    BaseAddress is the	base address of the device
-*
-* @return   A 32-bit value representing the contents of the status register.
-*
-* @note	    None.
-*
-*****************************************************************************/
-#define XUartLite_mGetStatusReg(BaseAddress) \
-		    XIo_In32((BaseAddress) + XUL_STATUS_REG_OFFSET)
-
-
-/****************************************************************************/
-/**
-*
-* Check to see if the receiver has data.
-*
-* @param    BaseAddress is the	base address of the device
-*
-* @return   XTRUE if the receiver is empty, XFALSE if there is data present.
-*
-* @note	    None.
-*
-*****************************************************************************/
-#define XUartLite_mIsReceiveEmpty(BaseAddress) \
-	  (!(XUartLite_mGetStatusReg((BaseAddress)) & XUL_SR_RX_FIFO_VALID_DATA))
-
-
-/****************************************************************************/
-/**
-*
-* Check to see if the transmitter is full.
-*
-* @param    BaseAddress is the	base address of the device
-*
-* @return   XTRUE if the transmitter is full, XFALSE otherwise.
-*
-* @note	    None.
-*
-*****************************************************************************/
-#define XUartLite_mIsTransmitFull(BaseAddress) \
-		(XUartLite_mGetStatusReg((BaseAddress)) & XUL_SR_TX_FIFO_FULL)
-
-
-/****************************************************************************/
-/**
-*
-* Check to see if the interrupt is enabled.
-*
-* @param    BaseAddress is the	base address of the device
-*
-* @return   XTRUE if the interrupt is enabled, XFALSE otherwise.
-*
-* @note	    None.
-*
-*****************************************************************************/
-#define XUartLite_mIsIntrEnabled(BaseAddress) \
-		(XUartLite_mGetStatusReg((BaseAddress)) & XUL_SR_INTR_ENABLED)
-
-
-/****************************************************************************/
-/**
-*
-* Enable the device interrupt. Preserve the contents of the control register.
-*
-* @param    BaseAddress is the	base address of the device
-*
-* @return   None.
-*
-* @note	    None.
-*
-*****************************************************************************/
-#define XUartLite_mEnableIntr(BaseAddress) \
-	       XUartLite_mSetControlReg((BaseAddress), \
-		   XUartLite_mGetControlReg((BaseAddress)) | XUL_CR_ENABLE_INTR)
-
-
-/****************************************************************************/
-/**
-*
-* Disable the device interrupt. Preserve the contents of the control register.
-*
-* @param    BaseAddress is the	base address of the device
-*
-* @return   None.
-*
-* @note	    None.
-*
-*****************************************************************************/
-#define XUartLite_mDisableIntr(BaseAddress) \
-	      XUartLite_mSetControlReg((BaseAddress), \
-		  XUartLite_mGetControlReg((BaseAddress)) & ~XUL_CR_ENABLE_INTR)
-
-
-/************************** Function Prototypes *****************************/
-
-void XUartLite_SendByte(u32 BaseAddress, u8 Data);
-u8 XUartLite_RecvByte(u32 BaseAddress);
-
-
-#endif		  /* end of protection macro */
diff --git a/include/asm-microblaze/io.h b/include/asm-microblaze/io.h
index aa37a60..8804724 100644
--- a/include/asm-microblaze/io.h
+++ b/include/asm-microblaze/io.h
@@ -16,6 +16,8 @@
 #ifndef __MICROBLAZE_IO_H__
 #define __MICROBLAZE_IO_H__
 
+#include <asm/types.h>
+
 #define IO_SPACE_LIMIT 0xFFFFFFFF
 
 #define readb(addr) \
diff --git a/include/asm-microblaze/serial_xuartlite.h b/include/asm-microblaze/serial_xuartlite.h
deleted file mode 100644
index 6cd1e83..0000000
--- a/include/asm-microblaze/serial_xuartlite.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * (C) Copyright 2004 Atmark Techno, Inc.
- *
- * Yasushi SHOJI <yashi@atmark-techno.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm/arch/xuartlite_l.h>
diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h
index 417099e..324eb6c 100644
--- a/include/configs/EB+MCF-EV123.h
+++ b/include/configs/EB+MCF-EV123.h
@@ -84,6 +84,8 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NET
 
+#define CONFIG_MCFTMR
+
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
 #	define CONFIG_NET_MULTI		1
diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h
index a19c342..e8804b5 100644
--- a/include/configs/M5475EVB.h
+++ b/include/configs/M5475EVB.h
@@ -303,9 +303,9 @@
 #define CFG_CS0_CTRL		0x00101980
 
 #ifdef CFG_NOR1SZ
-#define CFG_CS1_BASE		0xF8000000
+#define CFG_CS1_BASE		0xE0000000
 #define CFG_CS1_MASK		(((CFG_NOR1SZ << 20) - 1) & 0xFFFF0001)
-#define CFG_CS1_CTRL		0x00000D80
+#define CFG_CS1_CTRL		0x00101D80
 #endif
 
 #endif				/* _M5475EVB_H */
diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h
index b73e2e0..0f957ff 100644
--- a/include/configs/M5485EVB.h
+++ b/include/configs/M5485EVB.h
@@ -289,9 +289,9 @@
 #define CFG_CS0_CTRL		0x00101980
 
 #ifdef CFG_NOR1SZ
-#define CFG_CS1_BASE		0xF8000000
+#define CFG_CS1_BASE		0xE0000000
 #define CFG_CS1_MASK		(((CFG_NOR1SZ << 20) - 1) & 0xFFFF0001)
-#define CFG_CS1_CTRL		0x00000D80
+#define CFG_CS1_CTRL		0x00101D80
 #endif
 
 #endif				/* _M5485EVB_H */
diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h
index 0e49e6c..7c860e5 100644
--- a/include/configs/davinci_sffsdr.h
+++ b/include/configs/davinci_sffsdr.h
@@ -137,6 +137,7 @@
 #define CONFIG_CMD_SAVES
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF	/* Needed to load Integrity kernel. */
 #undef CONFIG_CMD_BDI
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_SETGETDCR
diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h
index 4a9cadb..b7ea1a9 100644
--- a/include/configs/pxa255_idp.h
+++ b/include/configs/pxa255_idp.h
@@ -208,6 +208,10 @@
 /*			"protect off"	*/
 
 
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS	1
+/* #define CONFIG_INITRD_TAG		1 */
+
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h
index 051b2e0..072675b 100644
--- a/include/configs/sc520_spunk.h
+++ b/include/configs/sc520_spunk.h
@@ -144,7 +144,7 @@
 
 #define CONFIG_SPI_EEPROM       /* SPI EEPROMs such as AT25010 or AT25640 */
 #define CONFIG_MW_EEPROM        /* MicroWire EEPROMS such as AT93LC46 */
-#define CONFIG_DS1722           /* Dallas DS1722 SPI Temperature probe */
+#define CONFIG_DTT_DS1722       /* Dallas DS1722 SPI Temperature probe */
 
 
 /* allow to overwrite serial and ethaddr */
diff --git a/include/dataflash.h b/include/dataflash.h
index f20c738..80f0633 100644
--- a/include/dataflash.h
+++ b/include/dataflash.h
@@ -137,6 +137,7 @@ struct dataflash_addr {
 /*-------------------------------------------------------------------------------------------------*/
 
 #define AT45DB161	0x2c
+#define AT45DB021	0x14
 #define AT45DB321	0x34
 #define AT45DB642	0x3c
 #define AT45DB128	0x10
diff --git a/include/dtt.h b/include/dtt.h
index 4e8aaad..34053d1 100644
--- a/include/dtt.h
+++ b/include/dtt.h
@@ -40,9 +40,11 @@
 #define DTT_COMMERCIAL_MAX_TEMP	70		/* 0 - +70 C */
 #define DTT_INDUSTRIAL_MAX_TEMP	85		/* -40 - +85 C */
 #define DTT_AUTOMOTIVE_MAX_TEMP	105		/* -40 - +105 C */
+
 #ifndef CFG_DTT_MAX_TEMP
 #define CFG_DTT_MAX_TEMP DTT_COMMERCIAL_MAX_TEMP
 #endif
+
 #ifndef CFG_DTT_HYSTERESIS
 #define CFG_DTT_HYSTERESIS	5		/* 5 C */
 #endif
@@ -54,79 +56,4 @@ extern int dtt_write(int sensor, int reg, int val);
 extern int dtt_get_temp(int sensor);
 #endif
 
-#if defined(CONFIG_DTT_LM75)
-#define DTT_READ_TEMP		0x0
-#define DTT_CONFIG		0x1
-#define DTT_TEMP_HYST		0x2
-#define DTT_TEMP_SET		0x3
-#endif
-
-#if defined(CONFIG_DTT_LM81)
-#define DTT_READ_TEMP		0x27
-#define DTT_CONFIG_TEMP		0x4b
-#define DTT_TEMP_MAX		0x39
-#define DTT_TEMP_HYST		0x3a
-#define DTT_CONFIG		0x40
-#endif
-
-#if defined(CONFIG_DTT_DS1621)
-#define DTT_READ_TEMP		0xAA
-#define DTT_READ_COUNTER	0xA8
-#define DTT_READ_SLOPE		0xA9
-#define DTT_WRITE_START_CONV	0xEE
-#define DTT_WRITE_STOP_CONV	0x22
-#define DTT_TEMP_HIGH		0xA1
-#define DTT_TEMP_LOW		0xA2
-#define DTT_CONFIG		0xAC
-#endif
-
-#if defined(CONFIG_DTT_DS1775)
-#define DTT_READ_TEMP		0x0
-#define DTT_CONFIG		0x1
-#define DTT_TEMP_HYST		0x2
-#define DTT_TEMP_OS		0x3
-#endif
-
-#if defined(CONFIG_DTT_ADM1021)
-#define DTT_READ_LOC_VALUE	0x00
-#define DTT_READ_REM_VALUE	0x01
-#define DTT_READ_STATUS		0x02
-#define DTT_READ_CONFIG		0x03
-#define DTT_READ_CONVRATE	0x04
-#define DTT_READ_LOC_HIGHLIM	0x05
-#define DTT_READ_LOC_LOWLIM	0x06
-#define DTT_READ_REM_HIGHLIM	0x07
-#define DTT_READ_REM_LOWLIM	0x08
-#define DTT_READ_DEVID		0xfe
-
-#define DTT_WRITE_CONFIG	0x09
-#define DTT_WRITE_CONVRATE	0x0a
-#define DTT_WRITE_LOC_HIGHLIM	0x0b
-#define DTT_WRITE_LOC_LOWLIM	0x0c
-#define DTT_WRITE_REM_HIGHLIM	0x0d
-#define DTT_WRITE_REM_LOWLIM	0x0e
-#define DTT_WRITE_ONESHOT	0x0f
-
-#define DTT_STATUS_BUSY		0x80	/* 1=ADC Converting */
-#define DTT_STATUS_LHIGH	0x40	/* 1=Local High Temp Limit Tripped */
-#define DTT_STATUS_LLOW		0x20	/* 1=Local Low Temp Limit Tripped */
-#define DTT_STATUS_RHIGH	0x10	/* 1=Remote High Temp Limit Tripped */
-#define DTT_STATUS_RLOW		0x08	/* 1=Remote Low Temp Limit Tripped */
-#define DTT_STATUS_OPEN		0x04	/* 1=Remote Sensor Open-Circuit */
-
-#define DTT_CONFIG_ALERT_MASKED	0x80	/* 0=ALERT Enabled, 1=ALERT Masked */
-#define DTT_CONFIG_STANDBY	0x40	/* 0=Run, 1=Standby */
-
-#define DTT_ADM1021_DEVID	0x41
-#endif
-
-#if defined(CONFIG_DTT_LM73)
-#define DTT_READ_TEMP		0x0
-#define DTT_CONFIG		0x1
-#define DTT_TEMP_HIGH		0x2
-#define DTT_TEMP_LOW		0x3
-#define DTT_CONTROL		0x4
-#define DTT_ID			0x7
-#endif
-
 #endif /* _DTT_H_ */