diff options
| author | Stefan Roese <sr@denx.de> | 2010-09-10 16:29:37 +0200 |
|---|---|---|
| committer | Stefan Roese <sr@denx.de> | 2010-09-23 08:32:02 +0200 |
| commit | 6aa9195daecf18f682a825213a08d28224644b93 (patch) | |
| tree | 04a95127bdfbe89d026ff57ff166eb784c617b0f /include | |
| parent | e6e1fb3050351ae96153b1ba6a5bd0a2d745794b (diff) | |
| download | u-boot-imx-6aa9195daecf18f682a825213a08d28224644b93.zip u-boot-imx-6aa9195daecf18f682a825213a08d28224644b93.tar.gz u-boot-imx-6aa9195daecf18f682a825213a08d28224644b93.tar.bz2 | |
ppc4xx: Fix CATcenter build
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/CATcenter.h | 23 |
1 files changed, 2 insertions, 21 deletions
diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h index 229a513..002435e 100644 --- a/include/configs/CATcenter.h +++ b/include/configs/CATcenter.h @@ -105,6 +105,7 @@ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_PPC4xx_EMAC #undef CONFIG_EXT_PHY #define CONFIG_NET_MULTI 1 @@ -398,6 +399,7 @@ * I2C EEPROM (CAT24WC16) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F @@ -410,16 +412,6 @@ /* last 4 bits of the address */ #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ - /* have only 8kB, 16kB is save here */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* ... */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Init Memory Controller: * @@ -570,17 +562,6 @@ #define DIMM_READ_ADDR 0xAB #define DIMM_WRITE_ADDR 0xAA -#define CPC0_PLLMR0 (CNTRL_DCR_BASE+0x0) /* PLL mode 0 register */ -#define CPC0_BOOT (CNTRL_DCR_BASE+0x1) /* Chip Clock Status register */ -#define CPC0_CR1 (CNTRL_DCR_BASE+0x2) /* Chip Control 1 register */ -#define CPC0_EPRCSR (CNTRL_DCR_BASE+0x3) /* EMAC PHY Rcv Clk Src register */ -#define CPC0_PLLMR1 (CNTRL_DCR_BASE+0x4) /* PLL mode 1 register */ -#define CPC0_UCR (CNTRL_DCR_BASE+0x5) /* UART Control register */ -#define CPC0_SRR (CNTRL_DCR_BASE+0x6) /* Soft Reset register */ -#define CPC0_JTAGID (CNTRL_DCR_BASE+0x7) /* JTAG ID register */ -#define CPC0_SPARE (CNTRL_DCR_BASE+0x8) /* Spare DCR */ -#define CPC0_PCI (CNTRL_DCR_BASE+0x9) /* PCI Control register */ - /* Defines for CPC0_PLLMR1 Register fields */ #define PLL_ACTIVE 0x80000000 #define CPC0_PLLMR1_SSCS 0x80000000 |