Merge with git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx/.git

24 files changed, 821 insertions, 218 deletions

diff --git a/include/405gp_i2c.h b/include/405gp_i2c.h
deleted file mode 100644
index 5a9a497..0000000
--- a/include/405gp_i2c.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#ifndef _405gp_i2c_h_
-#define _405gp_i2c_h_
-
-#define	   I2C_REGISTERS_BASE_ADDRESS 0xEF600500
-#define    IIC_MDBUF	(I2C_REGISTERS_BASE_ADDRESS+IICMDBUF)
-#define    IIC_SDBUF	(I2C_REGISTERS_BASE_ADDRESS+IICSDBUF)
-#define    IIC_LMADR	(I2C_REGISTERS_BASE_ADDRESS+IICLMADR)
-#define    IIC_HMADR	(I2C_REGISTERS_BASE_ADDRESS+IICHMADR)
-#define    IIC_CNTL	(I2C_REGISTERS_BASE_ADDRESS+IICCNTL)
-#define    IIC_MDCNTL	(I2C_REGISTERS_BASE_ADDRESS+IICMDCNTL)
-#define    IIC_STS	(I2C_REGISTERS_BASE_ADDRESS+IICSTS)
-#define    IIC_EXTSTS	(I2C_REGISTERS_BASE_ADDRESS+IICEXTSTS)
-#define    IIC_LSADR	(I2C_REGISTERS_BASE_ADDRESS+IICLSADR)
-#define    IIC_HSADR	(I2C_REGISTERS_BASE_ADDRESS+IICHSADR)
-#define    IIC_CLKDIV	(I2C_REGISTERS_BASE_ADDRESS+IICCLKDIV)
-#define    IIC_INTRMSK	(I2C_REGISTERS_BASE_ADDRESS+IICINTRMSK)
-#define    IIC_XFRCNT	(I2C_REGISTERS_BASE_ADDRESS+IICXFRCNT)
-#define    IIC_XTCNTLSS	(I2C_REGISTERS_BASE_ADDRESS+IICXTCNTLSS)
-#define    IIC_DIRECTCNTL (I2C_REGISTERS_BASE_ADDRESS+IICDIRECTCNTL)
-
-/* MDCNTL Register Bit definition */
-#define    IIC_MDCNTL_HSCL 0x01
-#define    IIC_MDCNTL_EUBS 0x02
-#define    IIC_MDCNTL_EINT 0x04
-#define    IIC_MDCNTL_ESM  0x08
-#define    IIC_MDCNTL_FSM  0x10
-#define    IIC_MDCNTL_EGC  0x20
-#define    IIC_MDCNTL_FMDB 0x40
-#define    IIC_MDCNTL_FSDB 0x80
-
-/* CNTL Register Bit definition */
-#define    IIC_CNTL_PT     0x01
-#define    IIC_CNTL_READ   0x02
-#define    IIC_CNTL_CHT    0x04
-#define    IIC_CNTL_RPST   0x08
-/* bit 2/3 for Transfer count*/
-#define    IIC_CNTL_AMD    0x40
-#define    IIC_CNTL_HMT    0x80
-
-/* STS Register Bit definition */
-#define    IIC_STS_PT	   0X01
-#define    IIC_STS_IRQA    0x02
-#define    IIC_STS_ERR	   0X04
-#define    IIC_STS_SCMP    0x08
-#define    IIC_STS_MDBF    0x10
-#define    IIC_STS_MDBS    0X20
-#define    IIC_STS_SLPR    0x40
-#define    IIC_STS_SSS     0x80
-
-/* EXTSTS Register Bit definition */
-#define    IIC_EXTSTS_XFRA 0X01
-#define    IIC_EXTSTS_ICT  0X02
-#define    IIC_EXTSTS_LA   0X04
-
-/* XTCNTLSS Register Bit definition */
-#define    IIC_XTCNTLSS_SRST  0x01
-#define    IIC_XTCNTLSS_EPI   0x02
-#define    IIC_XTCNTLSS_SDBF  0x04
-#define    IIC_XTCNTLSS_SBDD  0x08
-#define    IIC_XTCNTLSS_SWS   0x10
-#define    IIC_XTCNTLSS_SWC   0x20
-#define    IIC_XTCNTLSS_SRS   0x40
-#define    IIC_XTCNTLSS_SRC   0x80
-#endif
diff --git a/include/440_i2c.h b/include/440_i2c.h
deleted file mode 100644
index 0c2bf36..0000000
--- a/include/440_i2c.h
+++ /dev/null
@@ -1,71 +0,0 @@
-#ifndef _440_i2c_h_
-#define _440_i2c_h_
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
-    defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define    I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000700)
-#else
-#define    I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000400)
-#endif /*CONFIG_440EP CONFIG_440GR*/
-
-#define	   I2C_REGISTERS_BASE_ADDRESS I2C_BASE_ADDR
-#define    IIC_MDBUF	(I2C_REGISTERS_BASE_ADDRESS+IICMDBUF)
-#define    IIC_SDBUF	(I2C_REGISTERS_BASE_ADDRESS+IICSDBUF)
-#define    IIC_LMADR	(I2C_REGISTERS_BASE_ADDRESS+IICLMADR)
-#define    IIC_HMADR	(I2C_REGISTERS_BASE_ADDRESS+IICHMADR)
-#define    IIC_CNTL	(I2C_REGISTERS_BASE_ADDRESS+IICCNTL)
-#define    IIC_MDCNTL	(I2C_REGISTERS_BASE_ADDRESS+IICMDCNTL)
-#define    IIC_STS	(I2C_REGISTERS_BASE_ADDRESS+IICSTS)
-#define    IIC_EXTSTS	(I2C_REGISTERS_BASE_ADDRESS+IICEXTSTS)
-#define    IIC_LSADR	(I2C_REGISTERS_BASE_ADDRESS+IICLSADR)
-#define    IIC_HSADR	(I2C_REGISTERS_BASE_ADDRESS+IICHSADR)
-#define    IIC_CLKDIV	(I2C_REGISTERS_BASE_ADDRESS+IICCLKDIV)
-#define    IIC_INTRMSK	(I2C_REGISTERS_BASE_ADDRESS+IICINTRMSK)
-#define    IIC_XFRCNT	(I2C_REGISTERS_BASE_ADDRESS+IICXFRCNT)
-#define    IIC_XTCNTLSS	(I2C_REGISTERS_BASE_ADDRESS+IICXTCNTLSS)
-#define    IIC_DIRECTCNTL (I2C_REGISTERS_BASE_ADDRESS+IICDIRECTCNTL)
-
-/* MDCNTL Register Bit definition */
-#define    IIC_MDCNTL_HSCL 0x01
-#define    IIC_MDCNTL_EUBS 0x02
-#define    IIC_MDCNTL_EINT 0x04
-#define    IIC_MDCNTL_ESM  0x08
-#define    IIC_MDCNTL_FSM  0x10
-#define    IIC_MDCNTL_EGC  0x20
-#define    IIC_MDCNTL_FMDB 0x40
-#define    IIC_MDCNTL_FSDB 0x80
-
-/* CNTL Register Bit definition */
-#define    IIC_CNTL_PT     0x01
-#define    IIC_CNTL_READ   0x02
-#define    IIC_CNTL_CHT    0x04
-#define    IIC_CNTL_RPST   0x08
-/* bit 2/3 for Transfer count*/
-#define    IIC_CNTL_AMD    0x40
-#define    IIC_CNTL_HMT    0x80
-
-/* STS Register Bit definition */
-#define    IIC_STS_PT	   0X01
-#define    IIC_STS_IRQA    0x02
-#define    IIC_STS_ERR	   0X04
-#define    IIC_STS_SCMP    0x08
-#define    IIC_STS_MDBF    0x10
-#define    IIC_STS_MDBS    0X20
-#define    IIC_STS_SLPR    0x40
-#define    IIC_STS_SSS     0x80
-
-/* EXTSTS Register Bit definition */
-#define    IIC_EXTSTS_XFRA 0X01
-#define    IIC_EXTSTS_ICT  0X02
-#define    IIC_EXTSTS_LA   0X04
-
-/* XTCNTLSS Register Bit definition */
-#define    IIC_XTCNTLSS_SRST  0x01
-#define    IIC_XTCNTLSS_EPI   0x02
-#define    IIC_XTCNTLSS_SDBF  0x04
-#define    IIC_XTCNTLSS_SBDD  0x08
-#define    IIC_XTCNTLSS_SWS   0x10
-#define    IIC_XTCNTLSS_SWC   0x20
-#define    IIC_XTCNTLSS_SRS   0x40
-#define    IIC_XTCNTLSS_SRC   0x80
-#endif
diff --git a/include/4xx_i2c.h b/include/4xx_i2c.h
new file mode 100644
index 0000000..66b7997
--- /dev/null
+++ b/include/4xx_i2c.h
@@ -0,0 +1,122 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _4xx_i2c_h_
+#define _4xx_i2c_h_
+
+#define IIC_OK		0
+#define IIC_NOK		1
+#define IIC_NOK_LA	2		/* Lost arbitration */
+#define IIC_NOK_ICT	3		/* Incomplete transfer */
+#define IIC_NOK_XFRA	4		/* Transfer aborted */
+#define IIC_NOK_DATA	5		/* No data in buffer */
+#define IIC_NOK_TOUT	6		/* Transfer timeout */
+
+#define IIC_TIMEOUT	1		/* 1 second */
+
+#if defined(CONFIG_I2C_MULTI_BUS)
+#define I2C_BUS_OFFS	(i2c_bus_num * 0x100)
+#else
+#define I2C_BUS_OFFS	(0x000)
+#endif /* CONFIG_I2C_MULTI_BUS */
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define I2C_BASE_ADDR	(CFG_PERIPHERAL_BASE + 0x00000700 + I2C_BUS_OFFS)
+#elif defined(CONFIG_440)
+/* all remaining 440 variants */
+#define I2C_BASE_ADDR	(CFG_PERIPHERAL_BASE + 0x00000400 + I2C_BUS_OFFS)
+#else
+/* all 405 variants */
+#define I2C_BASE_ADDR	(0xEF600500 + I2C_BUS_OFFS)
+#endif
+
+#define I2C_REGISTERS_BASE_ADDRESS I2C_BASE_ADDR
+#define IIC_MDBUF	(I2C_REGISTERS_BASE_ADDRESS+IICMDBUF)
+#define IIC_SDBUF	(I2C_REGISTERS_BASE_ADDRESS+IICSDBUF)
+#define IIC_LMADR	(I2C_REGISTERS_BASE_ADDRESS+IICLMADR)
+#define IIC_HMADR	(I2C_REGISTERS_BASE_ADDRESS+IICHMADR)
+#define IIC_CNTL	(I2C_REGISTERS_BASE_ADDRESS+IICCNTL)
+#define IIC_MDCNTL	(I2C_REGISTERS_BASE_ADDRESS+IICMDCNTL)
+#define IIC_STS		(I2C_REGISTERS_BASE_ADDRESS+IICSTS)
+#define IIC_EXTSTS	(I2C_REGISTERS_BASE_ADDRESS+IICEXTSTS)
+#define IIC_LSADR	(I2C_REGISTERS_BASE_ADDRESS+IICLSADR)
+#define IIC_HSADR	(I2C_REGISTERS_BASE_ADDRESS+IICHSADR)
+#define IIC_CLKDIV	(I2C_REGISTERS_BASE_ADDRESS+IICCLKDIV)
+#define IIC_INTRMSK	(I2C_REGISTERS_BASE_ADDRESS+IICINTRMSK)
+#define IIC_XFRCNT	(I2C_REGISTERS_BASE_ADDRESS+IICXFRCNT)
+#define IIC_XTCNTLSS	(I2C_REGISTERS_BASE_ADDRESS+IICXTCNTLSS)
+#define IIC_DIRECTCNTL	(I2C_REGISTERS_BASE_ADDRESS+IICDIRECTCNTL)
+
+/* MDCNTL Register Bit definition */
+#define IIC_MDCNTL_HSCL		0x01
+#define IIC_MDCNTL_EUBS		0x02
+#define IIC_MDCNTL_EINT		0x04
+#define IIC_MDCNTL_ESM		0x08
+#define IIC_MDCNTL_FSM		0x10
+#define IIC_MDCNTL_EGC		0x20
+#define IIC_MDCNTL_FMDB		0x40
+#define IIC_MDCNTL_FSDB		0x80
+
+/* CNTL Register Bit definition */
+#define IIC_CNTL_PT		0x01
+#define IIC_CNTL_READ		0x02
+#define IIC_CNTL_CHT		0x04
+#define IIC_CNTL_RPST		0x08
+/* bit 2/3 for Transfer count*/
+#define IIC_CNTL_AMD		0x40
+#define IIC_CNTL_HMT		0x80
+
+/* STS Register Bit definition */
+#define IIC_STS_PT		0x01
+#define IIC_STS_IRQA		0x02
+#define IIC_STS_ERR		0x04
+#define IIC_STS_SCMP		0x08
+#define IIC_STS_MDBF		0x10
+#define IIC_STS_MDBS		0x20
+#define IIC_STS_SLPR		0x40
+#define IIC_STS_SSS		0x80
+
+/* EXTSTS Register Bit definition */
+#define IIC_EXTSTS_XFRA		0x01
+#define IIC_EXTSTS_ICT		0x02
+#define IIC_EXTSTS_LA		0x04
+
+/* XTCNTLSS Register Bit definition */
+#define IIC_XTCNTLSS_SRST	0x01
+#define IIC_XTCNTLSS_EPI	0x02
+#define IIC_XTCNTLSS_SDBF	0x04
+#define IIC_XTCNTLSS_SBDD	0x08
+#define IIC_XTCNTLSS_SWS	0x10
+#define IIC_XTCNTLSS_SWC	0x20
+#define IIC_XTCNTLSS_SRS	0x40
+#define IIC_XTCNTLSS_SRC	0x80
+
+/* IICx_DIRECTCNTL register */
+#define IIC_DIRCNTL_SDAC	0x08
+#define IIC_DIRCNTL_SCC		0x04
+#define IIC_DIRCNTL_MSDA	0x02
+#define IIC_DIRCNTL_MSC		0x01
+
+#define DIRCTNL_FREE(v)		(((v) & 0x0f) == 0x0f)
+#endif
diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h
index 648a10d..47c18e7 100644
--- a/include/asm-arm/io.h
+++ b/include/asm-arm/io.h
@@ -29,6 +29,10 @@
 #include <asm/arch/hardware.h>
 #endif	/* XXX###XXX */
 
+static inline void sync(void)
+{
+}
+
 /*
  * Generic virtual read/write.  Note that we don't support half-word
  * read/writes.  We define __arch_*[bl] here, and leave __arch_*w
diff --git a/include/asm-avr32/io.h b/include/asm-avr32/io.h
index e86c456..3c0d569 100644
--- a/include/asm-avr32/io.h
+++ b/include/asm-avr32/io.h
@@ -89,4 +89,8 @@ static __inline__ void * phys_to_virt(unsigned long address)
 
 #endif /* __KERNEL__ */
 
+static inline void sync(void)
+{
+}
+
 #endif /* __ASM_AVR32_IO_H */
diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h
index e5b388e..fc27194 100644
--- a/include/asm-blackfin/io.h
+++ b/include/asm-blackfin/io.h
@@ -25,6 +25,11 @@
 #ifndef _BLACKFIN_IO_H
 #define _BLACKFIN_IO_H
 
+static inline void sync(void)
+{
+	__asm__ __volatile__ asm("ssync" : : : "memory");
+}
+
 #ifdef __KERNEL__
 
 #include <linux/config.h>
diff --git a/include/asm-i386/io.h b/include/asm-i386/io.h
index 85d44aa..e64d788 100644
--- a/include/asm-i386/io.h
+++ b/include/asm-i386/io.h
@@ -201,4 +201,8 @@ __OUTS(b)
 __OUTS(w)
 __OUTS(l)
 
+static inline void sync(void)
+{
+}
+
 #endif
diff --git a/include/asm-m68k/io.h b/include/asm-m68k/io.h
index 79a9626..7bbdefb 100644
--- a/include/asm-m68k/io.h
+++ b/include/asm-m68k/io.h
@@ -1 +1,8 @@
-/* */
+#ifndef __ASM_M68K_IO_H_
+#define __ASM_M68K_IO_H_
+
+static inline void sync(void)
+{
+}
+
+#endif /* __ASM_M68K_IO_H_ */
diff --git a/include/asm-microblaze/io.h b/include/asm-microblaze/io.h
index 3359045..1c77ade 100644
--- a/include/asm-microblaze/io.h
+++ b/include/asm-microblaze/io.h
@@ -125,4 +125,8 @@ io_outsl (unsigned long port, const void *src, unsigned long count)
 #define ioremap_writethrough(physaddr, size)	(physaddr)
 #define ioremap_fullcache(physaddr, size)	(physaddr)
 
+static inline void sync(void)
+{
+}
+
 #endif /* __MICROBLAZE_IO_H__ */
diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h
index 857fb03..cd4d5dc 100644
--- a/include/asm-mips/io.h
+++ b/include/asm-mips/io.h
@@ -447,4 +447,8 @@ extern void (*_dma_cache_inv)(unsigned long start, unsigned long size);
 #define dma_cache_wback(start,size)	_dma_cache_wback(start,size)
 #define dma_cache_inv(start,size)	_dma_cache_inv(start,size)
 
+static inline void sync(void)
+{
+}
+
 #endif /* _ASM_IO_H */
diff --git a/include/asm-nios/io.h b/include/asm-nios/io.h
index 07499d9..d77695a 100644
--- a/include/asm-nios/io.h
+++ b/include/asm-nios/io.h
@@ -97,4 +97,8 @@ static inline void outsl (unsigned long port, const void *src, unsigned long cou
 	while (count--) outl (*p++, port);
 }
 
+static inline void sync(void)
+{
+}
+
 #endif /* __ASM_NIOS_IO_H_ */
diff --git a/include/asm-nios2/io.h b/include/asm-nios2/io.h
index 0fab53b..5bb5322 100644
--- a/include/asm-nios2/io.h
+++ b/include/asm-nios2/io.h
@@ -24,7 +24,10 @@
 #ifndef __ASM_NIOS2_IO_H_
 #define __ASM_NIOS2_IO_H_
 
-#define sync() asm volatile ("sync" : : : "memory");
+static inline void sync(void)
+{
+	__asm__ __volatile__ ("sync" : : : "memory");
+}
 
 extern unsigned char inb (unsigned char *port);
 extern unsigned short inw (unsigned short *port);
diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h
index 8e5fe11..bbc9ba0 100644
--- a/include/asm-ppc/io.h
+++ b/include/asm-ppc/io.h
@@ -95,8 +95,15 @@ extern void _outsl_ns(volatile u32 *port, const void *buf, int nl);
  * Acts as a barrier to ensure all previous I/O accesses have
  * completed before any further ones are issued.
  */
-#define eieio() __asm__ __volatile__ ("eieio" : : : "memory");
-#define sync()  __asm__ __volatile__ ("sync" : : : "memory");
+static inline void eieio(void)
+{
+	__asm__ __volatile__ ("eieio" : : : "memory");
+}
+
+static inline void sync(void)
+{
+	__asm__ __volatile__ ("sync" : : : "memory");
+}
 
 /* Enforce in-order execution of data I/O.
  * No distinction between read/write on PPC; use eieio for all three.
diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h
index 914f28b..b226825 100644
--- a/include/asm-ppc/mmu.h
+++ b/include/asm-ppc/mmu.h
@@ -335,41 +335,6 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower);
  * instructions.
  */
 
-#define	TLB_LO          1
-#define	TLB_HI          0
-
-#define	TLB_DATA        TLB_LO
-#define	TLB_TAG         TLB_HI
-
-/* Tag portion */
-
-#define TLB_EPN_MASK    0xFFFFFC00      /* Effective Page Number */
-#define TLB_PAGESZ_MASK 0x00000380
-#define TLB_PAGESZ(x)   (((x) & 0x7) << 7)
-#define   PAGESZ_1K		0
-#define   PAGESZ_4K             1
-#define   PAGESZ_16K            2
-#define   PAGESZ_64K            3
-#define   PAGESZ_256K           4
-#define   PAGESZ_1M             5
-#define   PAGESZ_4M             6
-#define   PAGESZ_16M            7
-#define TLB_VALID       0x00000040      /* Entry is valid */
-
-/* Data portion */
-
-#define TLB_RPN_MASK    0xFFFFFC00      /* Real Page Number */
-#define TLB_PERM_MASK   0x00000300
-#define TLB_EX          0x00000200      /* Instruction execution allowed */
-#define TLB_WR          0x00000100      /* Writes permitted */
-#define TLB_ZSEL_MASK   0x000000F0
-#define TLB_ZSEL(x)     (((x) & 0xF) << 4)
-#define TLB_ATTR_MASK   0x0000000F
-#define TLB_W           0x00000008      /* Caching is write-through */
-#define TLB_I           0x00000004      /* Caching is inhibited */
-#define TLB_M           0x00000002      /* Memory is coherent */
-#define TLB_G           0x00000001      /* Memory is guarded from prefetch */
-
 /*
  * e500 support
  */
@@ -482,7 +447,162 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower);
 #define LAWAR_SIZE_16G		(LAWAR_SIZE_BASE+23)
 #define LAWAR_SIZE_32G		(LAWAR_SIZE_BASE+24)
 
-#ifdef CONFIG_440SPE
+#ifdef CONFIG_440
+/* General */
+#define TLB_VALID   0x00000200
+
+/* Supported page sizes */
+
+#define SZ_1K	0x00000000
+#define SZ_4K	0x00000010
+#define SZ_16K	0x00000020
+#define SZ_64K	0x00000030
+#define SZ_256K	0x00000040
+#define SZ_1M	0x00000050
+#define SZ_16M	0x00000070
+#define SZ_256M	0x00000090
+
+/* Storage attributes */
+#define SA_W	0x00000800	/* Write-through */
+#define SA_I	0x00000400	/* Caching inhibited */
+#define SA_M	0x00000200	/* Memory coherence */
+#define SA_G	0x00000100	/* Guarded */
+#define SA_E	0x00000080	/* Endian */
+
+/* Access control */
+#define AC_X	0x00000024	/* Execute */
+#define AC_W	0x00000012	/* Write */
+#define AC_R	0x00000009	/* Read */
+
+/* Some handy macros */
+
+#define EPN(e)		((e) & 0xfffffc00)
+#define TLB0(epn,sz)	((EPN((epn)) | (sz) | TLB_VALID ))
+#define TLB1(rpn,erpn)	(((rpn) & 0xfffffc00) | (erpn))
+#define TLB2(a)		((a) & 0x00000fbf)
+
+#define tlbtab_start\
+	mflr	r1	;\
+	bl	0f	;
+
+#define tlbtab_end\
+	.long 0, 0, 0	;\
+0:	mflr	r0	;\
+	mtlr	r1	;\
+	blr		;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+/*----------------------------------------------------------------------------+
+| TLB specific defines.
++----------------------------------------------------------------------------*/
+#define TLB_256MB_ALIGN_MASK 0xF0000000
+#define TLB_16MB_ALIGN_MASK  0xFF000000
+#define TLB_1MB_ALIGN_MASK   0xFFF00000
+#define TLB_256KB_ALIGN_MASK 0xFFFC0000
+#define TLB_64KB_ALIGN_MASK  0xFFFF0000
+#define TLB_16KB_ALIGN_MASK  0xFFFFC000
+#define TLB_4KB_ALIGN_MASK   0xFFFFF000
+#define TLB_1KB_ALIGN_MASK   0xFFFFFC00
+#define TLB_256MB_SIZE       0x10000000
+#define TLB_16MB_SIZE        0x01000000
+#define TLB_1MB_SIZE         0x00100000
+#define TLB_256KB_SIZE       0x00040000
+#define TLB_64KB_SIZE        0x00010000
+#define TLB_16KB_SIZE        0x00004000
+#define TLB_4KB_SIZE         0x00001000
+#define TLB_1KB_SIZE         0x00000400
+
+#define TLB_WORD0_EPN_MASK   0xFFFFFC00
+#define TLB_WORD0_EPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00)
+#define TLB_WORD0_EPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00)
+#define TLB_WORD0_V_MASK     0x00000200
+#define TLB_WORD0_V_ENABLE   0x00000200
+#define TLB_WORD0_V_DISABLE  0x00000000
+#define TLB_WORD0_TS_MASK    0x00000100
+#define TLB_WORD0_TS_1       0x00000100
+#define TLB_WORD0_TS_0       0x00000000
+#define TLB_WORD0_SIZE_MASK  0x000000F0
+#define TLB_WORD0_SIZE_1KB   0x00000000
+#define TLB_WORD0_SIZE_4KB   0x00000010
+#define TLB_WORD0_SIZE_16KB  0x00000020
+#define TLB_WORD0_SIZE_64KB  0x00000030
+#define TLB_WORD0_SIZE_256KB 0x00000040
+#define TLB_WORD0_SIZE_1MB   0x00000050
+#define TLB_WORD0_SIZE_16MB  0x00000070
+#define TLB_WORD0_SIZE_256MB 0x00000090
+#define TLB_WORD0_TPAR_MASK  0x0000000F
+#define TLB_WORD0_TPAR_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0)
+#define TLB_WORD0_TPAR_DECODE(n) ((((unsigned long)(n))>>0)&0x0F)
+
+#define TLB_WORD1_RPN_MASK   0xFFFFFC00
+#define TLB_WORD1_RPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00)
+#define TLB_WORD1_RPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00)
+#define TLB_WORD1_PAR1_MASK  0x00000300
+#define TLB_WORD1_PAR1_ENCODE(n) ((((unsigned long)(n))&0x03)<<8)
+#define TLB_WORD1_PAR1_DECODE(n) ((((unsigned long)(n))>>8)&0x03)
+#define TLB_WORD1_PAR1_0     0x00000000
+#define TLB_WORD1_PAR1_1     0x00000100
+#define TLB_WORD1_PAR1_2     0x00000200
+#define TLB_WORD1_PAR1_3     0x00000300
+#define TLB_WORD1_ERPN_MASK  0x0000000F
+#define TLB_WORD1_ERPN_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0)
+#define TLB_WORD1_ERPN_DECODE(n) ((((unsigned long)(n))>>0)&0x0F)
+
+#define TLB_WORD2_PAR2_MASK  0xC0000000
+#define TLB_WORD2_PAR2_ENCODE(n) ((((unsigned long)(n))&0x03)<<30)
+#define TLB_WORD2_PAR2_DECODE(n) ((((unsigned long)(n))>>30)&0x03)
+#define TLB_WORD2_PAR2_0     0x00000000
+#define TLB_WORD2_PAR2_1     0x40000000
+#define TLB_WORD2_PAR2_2     0x80000000
+#define TLB_WORD2_PAR2_3     0xC0000000
+#define TLB_WORD2_U0_MASK    0x00008000
+#define TLB_WORD2_U0_ENABLE  0x00008000
+#define TLB_WORD2_U0_DISABLE 0x00000000
+#define TLB_WORD2_U1_MASK    0x00004000
+#define TLB_WORD2_U1_ENABLE  0x00004000
+#define TLB_WORD2_U1_DISABLE 0x00000000
+#define TLB_WORD2_U2_MASK    0x00002000
+#define TLB_WORD2_U2_ENABLE  0x00002000
+#define TLB_WORD2_U2_DISABLE 0x00000000
+#define TLB_WORD2_U3_MASK    0x00001000
+#define TLB_WORD2_U3_ENABLE  0x00001000
+#define TLB_WORD2_U3_DISABLE 0x00000000
+#define TLB_WORD2_W_MASK     0x00000800
+#define TLB_WORD2_W_ENABLE   0x00000800
+#define TLB_WORD2_W_DISABLE  0x00000000
+#define TLB_WORD2_I_MASK     0x00000400
+#define TLB_WORD2_I_ENABLE   0x00000400
+#define TLB_WORD2_I_DISABLE  0x00000000
+#define TLB_WORD2_M_MASK     0x00000200
+#define TLB_WORD2_M_ENABLE   0x00000200
+#define TLB_WORD2_M_DISABLE  0x00000000
+#define TLB_WORD2_G_MASK     0x00000100
+#define TLB_WORD2_G_ENABLE   0x00000100
+#define TLB_WORD2_G_DISABLE  0x00000000
+#define TLB_WORD2_E_MASK     0x00000080
+#define TLB_WORD2_E_ENABLE   0x00000080
+#define TLB_WORD2_E_DISABLE  0x00000000
+#define TLB_WORD2_UX_MASK    0x00000020
+#define TLB_WORD2_UX_ENABLE  0x00000020
+#define TLB_WORD2_UX_DISABLE 0x00000000
+#define TLB_WORD2_UW_MASK    0x00000010
+#define TLB_WORD2_UW_ENABLE  0x00000010
+#define TLB_WORD2_UW_DISABLE 0x00000000
+#define TLB_WORD2_UR_MASK    0x00000008
+#define TLB_WORD2_UR_ENABLE  0x00000008
+#define TLB_WORD2_UR_DISABLE 0x00000000
+#define TLB_WORD2_SX_MASK    0x00000004
+#define TLB_WORD2_SX_ENABLE  0x00000004
+#define TLB_WORD2_SX_DISABLE 0x00000000
+#define TLB_WORD2_SW_MASK    0x00000002
+#define TLB_WORD2_SW_ENABLE  0x00000002
+#define TLB_WORD2_SW_DISABLE 0x00000000
+#define TLB_WORD2_SR_MASK    0x00000001
+#define TLB_WORD2_SR_ENABLE  0x00000001
+#define TLB_WORD2_SR_DISABLE 0x00000000
+
 /*----------------------------------------------------------------------------+
 | Following instructions are not available in Book E mode of the GNU assembler.
 +----------------------------------------------------------------------------*/
@@ -516,11 +636,15 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower);
 #define MBAR_INST 				.long 0x7c000000|\
 					(854<<1)
 
-/*----------------------------------------------------------------------------+
-| Following instruction is not available in PPC405 mode of the GNU assembler.
-+----------------------------------------------------------------------------*/
-#define TLBRE(rt,ra,ws)			.long 0x7c000000|\
-					(rt<<21)|(ra<<16)|(ws<<11)|(946<<1)
+#ifndef __ASSEMBLY__
+/* Prototypes */
+void mttlb1(unsigned long index, unsigned long value);
+void mttlb2(unsigned long index, unsigned long value);
+void mttlb3(unsigned long index, unsigned long value);
+unsigned long mftlb1(unsigned long index);
+unsigned long mftlb2(unsigned long index);
+unsigned long mftlb3(unsigned long index);
+#endif /* __ASSEMBLY__ */
 
-#endif
+#endif /* CONFIG_440 */
 #endif /* _PPC_MMU_H_ */
diff --git a/include/common.h b/include/common.h
index 982d6a8..b162dbd 100644
--- a/include/common.h
+++ b/include/common.h
@@ -187,6 +187,7 @@ void	hang		(void) __attribute__ ((noreturn));
 long int initdram (int);
 int	display_options (void);
 void	print_size (ulong, const char *);
+int	print_buffer (ulong addr, void* data, uint width, uint count, uint linelen);
 
 /* common/main.c */
 void	main_loop	(void);
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
new file mode 100644
index 0000000..c750e14
--- /dev/null
+++ b/include/configs/katmai.h
@@ -0,0 +1,415 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2004 Paul Reynolds <PaulReynolds@lhsolutions.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * katmai.h - configuration for AMCC Katmai (440SPe)
+ ***********************************************************************/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_KATMAI			1	/* Board is Katmai	*/
+#define CONFIG_4xx			1	/* ... PPC4xx family	*/
+#define CONFIG_440			1	/* ... PPC440 family	*/
+#define CONFIG_440SPE			1	/* Specifc SPe support	*/
+#undef	CFG_DRAM_TEST				/* Disable-takes long time */
+#define CONFIG_SYS_CLK_FREQ	33333333	/* external freq to pll	*/
+
+#define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_pre_init		*/
+#define	CONFIG_MISC_INIT_F	1	/* Use misc_init_f()		*/
+#define CONFIG_ADD_RAM_INFO	1	/* Print additional info	*/
+#undef  CONFIG_SHOW_BOOT_PROGRESS
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN		(512 * 1024)	/* Reserve 512 kB for malloc */
+
+#define CFG_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
+#define CFG_FLASH_BASE		0xff000000	/* start of FLASH	*/
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_PERIPHERAL_BASE	0xa0000000	/* internal peripherals	*/
+#define CFG_ISRAM_BASE		0x90000000	/* internal SRAM	*/
+
+#define CFG_PCI_MEMBASE		0x80000000	/* mapped PCI memory	*/
+#define CFG_PCI_BASE		0xd0000000	/* internal PCI regs	*/
+#define CFG_PCI_TARGBASE	CFG_PCI_MEMBASE
+
+#define CFG_PCIE_MEMBASE	0xb0000000	/* mapped PCIe memory	*/
+#define CFG_PCIE_MEMSIZE	0x01000000
+#define CFG_PCIE_BASE		0xe0000000	/* PCIe UTL regs */
+
+#define CFG_PCIE0_CFGBASE	0xc0000000
+#define CFG_PCIE0_XCFGBASE	0xc0000400
+#define CFG_PCIE1_CFGBASE	0xc0001000
+#define CFG_PCIE1_XCFGBASE	0xc0001400
+#define CFG_PCIE2_CFGBASE	0xc0002000
+#define CFG_PCIE2_XCFGBASE	0xc0002400
+
+/* System RAM mapped to PCI space */
+#define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_SIZE	(1024 * 1024 * 1024)
+
+#define CFG_ACE_BASE		0xe0000000	/* Xilinx ACE controller - Compact Flash */
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in internal SRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_TEMP_STACK_OCM	1
+#define CFG_OCM_DATA_ADDR	CFG_ISRAM_BASE
+#define CFG_INIT_RAM_ADDR	CFG_ISRAM_BASE	/* Initial RAM address	*/
+#define CFG_INIT_RAM_END	0x2000		/* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
+
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
+#define CFG_INIT_SP_OFFSET	CFG_POST_WORD_ADDR
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#define CONFIG_SERIAL_MULTI	1
+#undef CONFIG_UART1_CONSOLE
+#undef CFG_EXT_SERIAL_CLOCK
+#define CONFIG_BAUDRATE		115200
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CONFIG_SPD_EEPROM	1	/* Use SPD EEPROM for setup	*/
+#define SPD_EEPROM_ADDRESS {0x51, 0x52}	/* SPD i2c spd addresses	*/
+#define IIC0_DIMM0_ADDR		0x51
+#define IIC0_DIMM1_ADDR		0x52
+#undef  CONFIG_STRESS
+#undef  ENABLE_ECC
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
+#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
+#define CFG_I2C_SPEED		100000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+#define CFG_SPD_BUS_NUM		0	/* The I2C bus for SPD		*/
+
+#define IIC0_BOOTPROM_ADDR	0x50
+#define IIC0_ALT_BOOTPROM_ADDR	0x54
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR	(0x50)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/* I2C RTC */
+#define CONFIG_RTC_M41T11	1
+#define CFG_RTC_BUS_NUM		1	/* The I2C bus for RTC		*/
+#define CFG_I2C_RTC_ADDR	0x68
+#define CFG_M41T11_BASE_YEAR	1900	/* play along with linux	*/
+
+/* I2C DTT */
+#define CONFIG_DTT_ADM1021	1	/* ADM1021 temp sensor support	*/
+#define CFG_DTT_BUS_NUM		1	/* The I2C bus for DTT		*/
+/*
+ * standard dtt sensor configuration - bottom bit will determine local or
+ * remote sensor of the ADM1021, the rest determines index into
+ * CFG_DTT_ADM1021 array below.
+ */
+#define CONFIG_DTT_SENSORS	{ 0, 1 }
+
+/*
+ * ADM1021 temp sensor configuration (see dtt/adm1021.c for details).
+ * there will be one entry in this array for each two (dummy) sensors in
+ * CONFIG_DTT_SENSORS.
+ *
+ * For Katmai board:
+ * - only one ADM1021
+ * - i2c addr 0x18
+ * - conversion rate 0x02 = 0.25 conversions/second
+ * - ALERT ouput disabled
+ * - local temp sensor enabled, min set to 0 deg, max set to 85 deg
+ * - remote temp sensor enabled, min set to 0 deg, max set to 85 deg
+ */
+#define CFG_DTT_ADM1021		{ { 0x18, 0x02, 0, 1, 0, 85, 1, 0, 58} }
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#define	CFG_ENV_IS_IN_FLASH	1	/* Environment uses flash	*/
+
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"hostname=katmai\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
+		"bootm\0"						\
+	"rootpath=/opt/eldk/ppc_4xx\0"				\
+	"bootfile=katmai/uImage\0"					\
+	"kernel_addr=fff10000\0"					\
+	"ramdisk_addr=fff20000\0"					\
+	"initrd_high=30000000\0"					\
+	"load=tftp 200000 katmai/u-boot.bin\0"				\
+	"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;"	\
+		"cp.b ${fileaddr} fffc0000 ${filesize};"		\
+		"setenv filesize;saveenv\0"				\
+	"upd=run load;run update\0"					\
+	"kozio=bootm ffc60000\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+
+#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
+				CFG_CMD_ASKENV	| \
+				CFG_CMD_EEPROM	| \
+				CFG_CMD_DATE	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_DIAG	| \
+				CFG_CMD_DTT	| \
+				CFG_CMD_ELF	| \
+				CFG_CMD_EXT2	| \
+				CFG_CMD_FAT	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_IRQ	| \
+				CFG_CMD_MII	| \
+				CFG_CMD_NET	| \
+				CFG_CMD_NFS	| \
+				CFG_CMD_PCI	| \
+				CFG_CMD_PING	| \
+				CFG_CMD_REGINFO	| \
+				CFG_CMD_SDRAM)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define	CONFIG_IBM_EMAC4_V4	1	/* 440SPe has this EMAC version	*/
+#define CONFIG_MII		1	/* MII PHY management		*/
+#define CONFIG_PHY_ADDR		1	/* PHY address, See schematics	*/
+#define CONFIG_HAS_ETH0
+#define CONFIG_PHY_RESET        1	/* reset phy upon startup	*/
+#define CONFIG_PHY_RESET_DELAY	1000
+#define CONFIG_CIS8201_PHY	1	/* Enable 'special' RGMII mode for Cicada phy */
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_NETCONSOLE		/* include NetConsole support	*/
+#define CONFIG_NET_MULTI		/* needed for NetConsole	*/
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP				/* undef to save memory		*/
+#define CFG_PROMPT		"=> "		/* Monitor Command Prompt	*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0400000	/* memtest works on		*/
+#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM		*/
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address		*/
+#define CFG_EXTBDINFO		1		/* To use extended board_into (bd_t) */
+
+#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
+#define CFG_4xx_RESET_TYPE	0x2	/* use chip reset on this board	*/
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+
+#define CFG_FLASH_BANKS_LIST    {CFG_FLASH_BASE}
+#define CFG_MAX_FLASH_BANKS     1		    /* number of banks	    */
+#define CFG_MAX_FLASH_SECT	1024		    /* sectors per device   */
+
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define CFG_ENV_SECT_SIZE	0x20000 /* size of one complete sector	*/
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+/* General PCI */
+#define CONFIG_PCI			/* include pci support		*/
+#define CONFIG_PCI_PNP		1	/* do pci plug-and-play		*/
+#define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup	*/
+#undef CONFIG_PCI_CONFIG_HOST_BRIDGE
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT	1	/* enable board pci_pre_init()	*/
+#define CFG_PCI_TARGET_INIT		/* let board init pci target    */
+#undef	CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x1014	/* IBM				*/
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever			*/
+/* #define CFG_PCI_SUBSYS_ID	CFG_PCI_SUBSYS_DEVICEID */
+
+/*
+ *  NETWORK Support (PCI):
+ */
+/* Support for Intel 82557/82559/82559ER chips. */
+#define CONFIG_EEPRO100
+
+/*-----------------------------------------------------------------------
+ * Xilinx System ACE support
+ *----------------------------------------------------------------------*/
+#define CONFIG_SYSTEMACE	1	/* Enable SystemACE support	*/
+#define CFG_SYSTEMACE_WIDTH	16	/* Data bus width is 16		*/
+#define CFG_SYSTEMACE_BASE	CFG_ACE_BASE
+#define CONFIG_DOS_PARTITION	1
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+
+/* Memory Bank 0 (Flash) initialization					*/
+#define CFG_EBC_PB0AP		(EBC_BXAP_BME_DISABLED      |		\
+				 EBC_BXAP_TWT_ENCODE(7)     |		\
+				 EBC_BXAP_BCE_DISABLE       |		\
+				 EBC_BXAP_BCT_2TRANS        |		\
+				 EBC_BXAP_CSN_ENCODE(0)     |		\
+				 EBC_BXAP_OEN_ENCODE(0)     |		\
+				 EBC_BXAP_WBN_ENCODE(0)     |		\
+				 EBC_BXAP_WBF_ENCODE(0)     |		\
+				 EBC_BXAP_TH_ENCODE(0)      |		\
+				 EBC_BXAP_RE_DISABLED       |		\
+				 EBC_BXAP_SOR_DELAYED       |		\
+				 EBC_BXAP_BEM_WRITEONLY     |		\
+				 EBC_BXAP_PEN_DISABLED)
+#define CFG_EBC_PB0CR		(EBC_BXCR_BAS_ENCODE(CFG_FLASH_BASE) |	\
+				 EBC_BXCR_BS_16MB                    |	\
+				 EBC_BXCR_BU_RW                      |	\
+				 EBC_BXCR_BW_16BIT)
+
+/* Memory Bank 1 (Xilinx System ACE controller) initialization		*/
+#define CFG_EBC_PB1AP		0x7F8FFE80
+#define CFG_EBC_PB1CR		(EBC_BXCR_BAS_ENCODE(CFG_ACE_BASE)  |	\
+				 EBC_BXCR_BS_1MB                    |	\
+				 EBC_BXCR_BU_RW                     |	\
+				 EBC_BXCR_BW_16BIT)
+
+/*-------------------------------------------------------------------------
+ * Initialize EBC CONFIG -
+ * Keep the Default value, but the bit PDT which has to be set to 1 ?TBC
+ * default value : 0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000
+ *-------------------------------------------------------------------------*/
+#define CFG_EBC_CFG		(EBC_CFG_LE_UNLOCK    |	\
+				 EBC_CFG_PTD_ENABLE   |	\
+				 EBC_CFG_RTC_16PERCLK | \
+				 EBC_CFG_ATC_PREVIOUS | \
+				 EBC_CFG_DTC_PREVIOUS | \
+				 EBC_CFG_CTC_PREVIOUS | \
+				 EBC_CFG_OEO_PREVIOUS | \
+				 EBC_CFG_EMC_DEFAULT  |	\
+				 EBC_CFG_PME_DISABLE  |	\
+				 EBC_CFG_PR_16)
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/*Initial Memory map for Linux*/
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs		*/
+#define CFG_CACHELINE_SIZE	32	/* ...				*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index f60973b..621a81c 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -265,6 +265,7 @@
  */
 #if !defined(CONFIG_PRS200)
 #define CONFIG_LCD		1
+#define CONFIG_PROGRESSBAR 1
 #endif
 
 #if defined(CONFIG_LCD)
diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h
index ccb0293..0c10294 100644
--- a/include/configs/mecp5200.h
+++ b/include/configs/mecp5200.h
@@ -88,10 +88,10 @@
 /* USB */
 #if 0
 #define CONFIG_USB_OHCI
-#define ADD_USB_CMD             CFG_CMD_USB | CFG_CMD_FAT
+#define ADD_USB_CMD		CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
 #else
-#define ADD_USB_CMD             0
+#define ADD_USB_CMD		0
 #endif
 
 /*
@@ -100,7 +100,7 @@
 #define CONFIG_COMMANDS		(CONFIG_CMD_DFL	| \
 				 CFG_CMD_EEPROM	| \
 				 CFG_CMD_FAT	| \
-                                 CFG_CMD_EXT2   | \
+				 CFG_CMD_EXT2	| \
 				 CFG_CMD_I2C	| \
 				 CFG_CMD_IDE	| \
 				 CFG_CMD_BSP	| \
@@ -110,11 +110,11 @@
 #include <cmd_confdefs.h>
 
 #if (TEXT_BASE == 0xFF000000)		/* Boot low with 16 MB Flash */
-#   define CFG_LOWBOOT	        1
+#   define CFG_LOWBOOT		1
 #   define CFG_LOWBOOT16	1
 #endif
 #if (TEXT_BASE == 0xFF800000)		/* Boot low with  8 MB Flash */
-#   define CFG_LOWBOOT	        1
+#   define CFG_LOWBOOT		1
 #   define CFG_LOWBOOT08	1
 #endif
 
@@ -131,20 +131,20 @@
 
 #define	CONFIG_EXTRA_ENV_SETTINGS \
 	"netdev=eth0\0" \
-        "flash_vxworks0=run ata_vxworks_args;setenv loadaddr ff000000;bootvx\0" \
-        "flash_vxworks1=run ata_vxworks_args;setenv loadaddr ff200000:bootvx\0" \
-        "net_vxworks=tftp $(loadaddr) $(image);run vxworks_args;bootvx\0" \
-        "vxworks_args=setenv bootargs fec(0,0)$(host):$(image) h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script)\0" \
-        "ata_vxworks_args=setenv bootargs /ata0/vxWorks h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script) o=fec0 \0" \
-        "loadaddr=01000000\0" \
-        "serverip=192.168.2.99\0" \
-        "gatewayip=10.0.0.79\0" \
-        "user=mu\0" \
-        "target=mecp5200.esd\0" \
-        "script=mecp5200.bat\0" \
-        "image=/tftpboot/vxWorks_mecp5200\0" \
-        "ipaddr=10.0.13.196\0" \
-        "netmask=255.255.0.0\0" \
+	"flash_vxworks0=run ata_vxworks_args;setenv loadaddr ff000000;bootvx\0" \
+	"flash_vxworks1=run ata_vxworks_args;setenv loadaddr ff200000:bootvx\0" \
+	"net_vxworks=tftp $(loadaddr) $(image);run vxworks_args;bootvx\0" \
+	"vxworks_args=setenv bootargs fec(0,0)$(host):$(image) h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script)\0" \
+	"ata_vxworks_args=setenv bootargs /ata0/vxWorks h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script) o=fec0 \0" \
+	"loadaddr=01000000\0" \
+	"serverip=192.168.2.99\0" \
+	"gatewayip=10.0.0.79\0" \
+	"user=mu\0" \
+	"target=mecp5200.esd\0" \
+	"script=mecp5200.bat\0" \
+	"image=/tftpboot/vxWorks_mecp5200\0" \
+	"ipaddr=10.0.13.196\0" \
+	"netmask=255.255.0.0\0" \
 	""
 
 #define CONFIG_BOOTCOMMAND	"run flash_vxworks0"
@@ -171,12 +171,12 @@
 #define CFG_I2C_EEPROM_ADDR_LEN		2
 #define CFG_EEPROM_PAGE_WRITE_BITS	5
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	20
-#define CFG_I2C_MULTI_EEPROMS           1
+#define CFG_I2C_MULTI_EEPROMS		1
 /*
  * Flash configuration
  */
 #define CFG_FLASH_BASE		0xFFC00000
-#define CFG_FLASH_SIZE	        0x00400000
+#define CFG_FLASH_SIZE		0x00400000
 #define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x003E0000)
 #define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks      */
 #define CFG_MAX_FLASH_SECT	512
@@ -200,15 +200,15 @@
 #define CONFIG_ENV_OVERWRITE	1
 #endif
 
-#define CFG_FLASH_CFI_DRIVER    1          /* Flash is CFI conformant           */
-#define CFG_FLASH_CFI           1          /* Flash is CFI conformant           */
-#define CFG_FLASH_PROTECTION    1          /* use hardware protection           */
+#define CFG_FLASH_CFI_DRIVER	1	   /* Flash is CFI conformant		*/
+#define CFG_FLASH_CFI		1	   /* Flash is CFI conformant		*/
+#define CFG_FLASH_PROTECTION	1	   /* use hardware protection		*/
 #if 0
 #define CFG_FLASH_USE_BUFFER_WRITE 1       /* use buffered writes (20x faster)  */
 #endif
-#define CFG_FLASH_INCREMENT     0x00400000 /* size of  flash bank               */
+#define CFG_FLASH_INCREMENT	0x00400000 /* size of  flash bank		*/
 #define CFG_FLASH_BANKS_LIST  { CFG_FLASH_BASE }
-#define CFG_FLASH_EMPTY_INFO    1          /* show if bank is empty             */
+#define CFG_FLASH_EMPTY_INFO	1	   /* show if bank is empty		*/
 
 
 /*
@@ -272,7 +272,7 @@
 
 #define CFG_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	        /* decrementer freq: 1 ms ticks */
+#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
 
 #define CFG_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
 
@@ -339,7 +339,7 @@
 /* Offset for alternate registers	*/
 #define CFG_ATA_ALT_OFFSET	(0x005C)
 
-/* Interval between registers                                                */
-#define CFG_ATA_STRIDE          4
+/* Interval between registers		*/
+#define CFG_ATA_STRIDE		4
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 098aa3f..29f3b40 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -391,7 +391,7 @@
 #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
 #define CFG_NAND_CS		3		/* NAND chip connected to CSx	*/
 /* Memory Bank 0 (NOR-FLASH) initialization					*/
-#define CFG_EBC_PB0AP		0x03017300
+#define CFG_EBC_PB0AP		0x03017200
 #define CFG_EBC_PB0CR		(CFG_FLASH | 0xda000)
 
 /* Memory Bank 3 (NAND-FLASH) initialization					*/
@@ -400,7 +400,7 @@
 #else
 #define CFG_NAND_CS		0		/* NAND chip connected to CSx	*/
 /* Memory Bank 3 (NOR-FLASH) initialization					*/
-#define CFG_EBC_PB3AP		0x03017300
+#define CFG_EBC_PB3AP		0x03017200
 #define CFG_EBC_PB3CR		(CFG_FLASH | 0xda000)
 
 /* Memory Bank 0 (NAND-FLASH) initialization					*/
diff --git a/include/i2c.h b/include/i2c.h
index a8f729a..54c6f9f 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -46,6 +46,16 @@
  */
 #define I2C_RXTX_LEN	128	/* maximum tx/rx buffer length */
 
+#if defined(CONFIG_I2C_MULTI_BUS)
+#define CFG_MAX_I2C_BUS		2
+#define I2C_GET_BUS()		i2c_get_bus_num()
+#define I2C_SET_BUS(a)		i2c_set_bus_num(a)
+#else
+#define CFG_MAX_I2C_BUS		1
+#define I2C_GET_BUS()		0
+#define I2C_SET_BUS(a)
+#endif
+
 /*
  * Initialization, must be called once on start up, may be called
  * repeatedly to change the speed and slave addresses.
diff --git a/include/ide.h b/include/ide.h
index dfef32f..6976a6c 100644
--- a/include/ide.h
+++ b/include/ide.h
@@ -48,8 +48,8 @@ typedef ulong lbaint_t;
  * Function Prototypes
  */
 
-void  ide_init  (void);
-ulong ide_read	(int device, lbaint_t blknr, ulong blkcnt, ulong *buffer);
-ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer);
+void ide_init(void);
+ulong ide_read(int device, lbaint_t blknr, ulong blkcnt, void *buffer);
+ulong ide_write(int device, lbaint_t blknr, ulong blkcnt, void *buffer);
 
 #endif /* _IDE_H */
diff --git a/include/part.h b/include/part.h
index 318aa3c..29c0320 100644
--- a/include/part.h
+++ b/include/part.h
@@ -22,6 +22,7 @@
  */
 #ifndef _PART_H
 #define _PART_H
+
 #include <ide.h>
 
 typedef struct block_dev_desc {
@@ -43,7 +44,11 @@ typedef struct block_dev_desc {
 	unsigned long	(*block_read)(int dev,
 				      unsigned long start,
 				      lbaint_t blkcnt,
-				      unsigned long *buffer);
+				      void *buffer);
+	unsigned long	(*block_write)(int dev,
+				       unsigned long start,
+				       lbaint_t blkcnt,
+				       const void *buffer);
 }block_dev_desc_t;
 
 /* Interface types: */
@@ -83,6 +88,14 @@ typedef struct disk_partition {
 	uchar	type[32];	/* string type description		*/
 } disk_partition_t;
 
+/* Misc _get_dev functions */
+block_dev_desc_t* get_dev(char* ifname, int dev);
+block_dev_desc_t* ide_get_dev(int dev);
+block_dev_desc_t* scsi_get_dev(int dev);
+block_dev_desc_t* usb_stor_get_dev(int dev);
+block_dev_desc_t* mmc_get_dev(int dev);
+block_dev_desc_t* systemace_get_dev(int dev);
+
 /* disk/part.c */
 int get_partition_info (block_dev_desc_t * dev_desc, int part, disk_partition_t *info);
 void print_part (block_dev_desc_t *dev_desc);
diff --git a/include/ppc405.h b/include/ppc405.h
index e475fa5..a49912c 100644
--- a/include/ppc405.h
+++ b/include/ppc405.h
@@ -240,6 +240,7 @@
   #define pbesr0      0x21    /* periph bus error status reg 0       */
   #define pbesr1      0x22    /* periph bus error status reg 1       */
   #define epcr        0x23    /* external periph control reg         */
+#define EBC0_CFG	0x23	/* external bus configuration reg	*/
 
 #ifdef CONFIG_405EP
 /******************************************************************************
diff --git a/include/ppc440.h b/include/ppc440.h
index 91cff41..c24f5b7 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -533,9 +533,12 @@
 #define SDRAM_MCSTAT_MIC_MASK		0x80000000	/* Memory init status mask	*/
 #define SDRAM_MCSTAT_MIC_NOTCOMP	0x00000000	/* Mem init not complete	*/
 #define SDRAM_MCSTAT_MIC_COMP		0x80000000	/* Mem init complete		*/
-#define SDRAM_MCSTAT_SRMS_MASK		0x80000000	/* Mem self refresh stat mask	*/
+#define SDRAM_MCSTAT_SRMS_MASK		0x40000000	/* Mem self refresh stat mask	*/
 #define SDRAM_MCSTAT_SRMS_NOT_SF	0x00000000	/* Mem not in self refresh	*/
-#define SDRAM_MCSTAT_SRMS_SF		0x80000000	/* Mem in self refresh		*/
+#define SDRAM_MCSTAT_SRMS_SF		0x40000000	/* Mem in self refresh		*/
+#define SDRAM_MCSTAT_IDLE_MASK		0x20000000	/* Mem self refresh stat mask	*/
+#define SDRAM_MCSTAT_IDLE_NOT		0x00000000	/* Mem contr not idle		*/
+#define SDRAM_MCSTAT_IDLE		0x20000000	/* Mem contr idle		*/
 
 /*-----------------------------------------------------------------------------+
 |  Memory Controller Options 1
@@ -730,6 +733,7 @@
 #define SDRAM_WRDTR_LLWP_1_CYC		0x00000000
 #define SDRAM_WRDTR_WTR_MASK		0x0E000000
 #define SDRAM_WRDTR_WTR_0_DEG		0x06000000
+#define SDRAM_WRDTR_WTR_90_DEG_ADV	0x04000000
 #define SDRAM_WRDTR_WTR_180_DEG_ADV	0x02000000
 #define SDRAM_WRDTR_WTR_270_DEG_ADV	0x00000000
 
@@ -847,6 +851,7 @@
 #define pbear		0x20	/* periph bus error addr reg		*/
 #define pbesr		0x21	/* periph bus error status reg		*/
 #define xbcfg		0x23	/* external bus configuration reg	*/
+#define EBC0_CFG	0x23	/* external bus configuration reg	*/
 #define xbcid		0x24	/* external bus core id reg		*/
 
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \