diff options
| author | Jon Loeliger <jdl@freescale.com> | 2006-05-09 08:23:49 -0500 |
|---|---|---|
| committer | Jon Loeliger <jdl@freescale.com> | 2006-05-09 08:23:49 -0500 |
| commit | 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8 (patch) | |
| tree | c58a863cb0c11ffc1195c32ec1cca598531c20e3 /include | |
| parent | 5c9efb36a6b5431423f52888a0e3b4b515fe7eca (diff) | |
| download | u-boot-imx-18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8.zip u-boot-imx-18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8.tar.gz u-boot-imx-18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8.tar.bz2 | |
Get MPC8641HPCN flash images working.
Enable the CFI driver.
Remove bogus LAWBAR7 cruft.
Use correct TEXT_BASE, Fixup load script.
Enable SPD EEPROM during DDR setup.
Use generic RFC 1918 IP addresses by default.
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/MPC8641HPCN.h | 30 |
1 files changed, 14 insertions, 16 deletions
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 76efd7c..d4a28ed 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -51,6 +51,7 @@ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #undef CONFIG_DDR_DLL /* possible DLL fix needed */ #define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */ #define CONFIG_DDR_ECC /* only for ECC DDR module */ @@ -102,11 +103,9 @@ #else /* - * Manually set up DDR parameters + * Manually set up DDR1 parameters */ -/* DDR I */ -#if 1 #define CFG_SDRAM_SIZE 256 /* DDR is 256MB */ #define CFG_DDR_CS0_BNDS 0x0000000F @@ -125,15 +124,14 @@ #define CFG_DDR_CONTROL 0xe3008000 /* Type = DDR2 */ #define CFG_DDR_CONTROL2 0x04400000 - //Not used in fixed_sdram function + /* Not used in fixed_sdram function */ #define CFG_DDR_MODE 0x00000022 #define CFG_DDR_CS1_BNDS 0x00000000 - #define CFG_DDR_CS2_BNDS 0x00000FFF //Not done - #define CFG_DDR_CS3_BNDS 0x00000FFF //Not done - #define CFG_DDR_CS4_BNDS 0x00000FFF //Not done - #define CFG_DDR_CS5_BNDS 0x00000FFF //Not done -#endif + #define CFG_DDR_CS2_BNDS 0x00000FFF /* Not done */ + #define CFG_DDR_CS3_BNDS 0x00000FFF /* Not done */ + #define CFG_DDR_CS4_BNDS 0x00000FFF /* Not done */ + #define CFG_DDR_CS5_BNDS 0x00000FFF /* Not done */ #endif @@ -190,6 +188,7 @@ #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ #define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ +#define CFG_FLASH_CFI_DRIVER #define CFG_FLASH_CFI #define CFG_FLASH_EMPTY_INFO @@ -199,14 +198,14 @@ #undef CFG_RAMBOOT #endif -#if !defined(CFG_RAMBOOT) -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ +#if !defined(CONFIG_SPD_EEPROM) && !defined(CFG_RAMBOOT) +#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #endif #undef CONFIG_CLOCKS_IN_MHZ #define CONFIG_L1_INIT_RAM -#undef CFG_INIT_RAM_LOCK +#define CFG_INIT_RAM_LOCK 1 #ifndef CFG_INIT_RAM_LOCK #define CFG_INIT_RAM_ADDR 0x0fd00000 /* Initial RAM address */ #else @@ -540,22 +539,21 @@ #define CONFIG_HAS_ETH2 1 #define CONFIG_HAS_ETH3 1 -#define CONFIG_IPADDR 10.82.193.138 +#define CONFIG_IPADDR 192.168.1.100 #define CONFIG_HOSTNAME unknown #define CONFIG_ROOTPATH /opt/nfsroot #define CONFIG_BOOTFILE uImage #define CONFIG_SERVERIP 192.168.1.1 -#define CONFIG_GATEWAYIP 10.82.193.104 +#define CONFIG_GATEWAYIP 192.168.1.1 #define CONFIG_NETMASK 255.255.255.0 /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ -//#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ -#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200" +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_BAUDRATE 115200 |