* Patch by Martin Krause, 17 Jul 2003:

  add delay to get I2C working with "imm" command and s3c24x0_i2c.c

* Patch by Richard Woodruff, 17 July 03:
  - Fixed bug in OMAP1510 baud rate divisor settings.

* Patch by Nye Liu, 16 July 2003:
  MPC860FADS fixes:
  - add MPC86xADS support (uses MPC86xADS.h)
  - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
    o PLPRCR changes
    o BRG changes (EXTAL/XTAL restricted to 10MHz)
    o don't trust gclk() software measurement by default, depend on
      CONFIG_8xx_GCLK_FREQ
  - add DRAM SIMM not installed detection
  - use more "correct" SDRAM initialization sequence
  - allow different SDRAM sizes (8xxADS has 8M)
  - default DER is 0
  - remove unused MAMR defines from FADS860T.h (all done in fads.c)
  - rename MAMR/MBMR defines to be more consistent. Should eventually
    be merged into MxMR to better reflect the PowerQUICC datasheet.

* Patch by Yuli Barcohen, 16 Jul 2003:
  support new Motorola PQ2FADS-ZU evaluation board which replaced
  MPC8260ADS and MPC8266ADS

18 files changed, 750 insertions, 244 deletions

diff --git a/include/common.h b/include/common.h
index c8ad856..03db8d7 100644
--- a/include/common.h
+++ b/include/common.h
@@ -43,6 +43,20 @@ typedef volatile unsigned char	vu_char;
 #endif
 #ifdef	CONFIG_8xx
 #include <asm/8xx_immap.h>
+#ifdef CONFIG_MPC860
+#define CONFIG_MPC86x 1
+#endif
+#ifdef CONFIG_MPC860T
+#define CONFIG_MPC86x 1
+#endif
+#if defined(CONFIG_MPC866P) || \
+    defined(CONFIG_MPC866T) || \
+    defined(CONFIG_MPC859T) || \
+    defined(CONFIG_MPC859DSL) || \
+    defined(CONFIG_MPC852T)
+#define CONFIG_MPC866_et_al 1
+#define CONFIG_MPC86x 1
+#endif
 #elif defined(CONFIG_5xx)
 #include <asm/5xx_immap.h>
 #elif defined(CONFIG_8260)
diff --git a/include/commproc.h b/include/commproc.h
index 652d2ab..6845248 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -707,10 +707,10 @@ typedef struct scc_enet {
 
 /***  FADS860T********************************************************/
 
-#if defined(CONFIG_MPC860T) && defined(CONFIG_FADS)
-/* This ENET stuff is for the MPC860TFADS with ethernet on SCC1.
+#if (defined(CONFIG_MPC860T) || defined(CONFIG_MPC866_et_al)) \
+    && defined(CONFIG_FADS)
+/* This ENET stuff is for the MPC860TFADS/MPC8xxADS with ethernet on SCC1.
  */
-
 #ifdef CONFIG_SCC1_ENET
 #define	SCC_ENET	0
 #endif	/* CONFIG_SCC1_ETHERNET */
diff --git a/include/configs/ADS860.h b/include/configs/ADS860.h
index 1b73692..0045303 100644
--- a/include/configs/ADS860.h
+++ b/include/configs/ADS860.h
@@ -19,6 +19,7 @@
 #include <mpc8xx_irq.h>
 
 #define CONFIG_MPC860		1
+#define CONFIG_MPC860T		1
 #define CONFIG_ADS		1
 
 #define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1	    */
@@ -31,10 +32,12 @@
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address defaults */
 #define CFG_I2C_SLAVE		0x7F
 
-#define MPC8XX_XIN		32768	/* 32.768 kHz input frequency	*/
-#define MPC8XX_FACT		0x5F6	/* Multiply by 1526 */
+#define CFG_8XX_XIN		32768	/* 32.768 kHz input frequency	*/
+#define CFG_8XX_FACT		0x5F6	/* Multiply by 1526 */
 					/* MPC8XX_FACT * MPC8XX_XIN = 50 MHz */
 
+#define CONFIG_8xx_GCLK_FREQ   ((CFG_8XX_XIN) * (CFG_8XX_FACT))
+
 #define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
 
 #if 0
@@ -136,7 +139,7 @@
  * FLASH organization
  */
 #define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks	    */
-#define CFG_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
+#define CFG_MAX_FLASH_SECT	16	/* max number of sectors on one chip	*/
 
 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)  */
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)  */
@@ -198,7 +201,7 @@
  *-----------------------------------------------------------------------
  * set the PLL, the low-power modes and the reset control (15-29)
  */
-#define CFG_PLPRCR  (((MPC8XX_FACT-1) << 20) |	\
+#define CFG_PLPRCR  (((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
 		PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/FADS823.h b/include/configs/FADS823.h
index acb2eed..3b201a7 100644
--- a/include/configs/FADS823.h
+++ b/include/configs/FADS823.h
@@ -23,6 +23,7 @@
 #define CFG_PCMCIA_MEM_ADDR	0xe0000000
 #define CFG_PCMCIA_MEM_SIZE	0x10000
 #define CFG_IMMR		0xFF000000
+#define	CFG_SDRAM_SIZE		(4<<20) /* standard FADS has 4M */
 #define	CFG_SDRAM_BASE		0x00000000
 #define CFG_FLASH_BASE		0x02800000
 #define BCSR_ADDR		((uint) 0xff010000)
diff --git a/include/configs/FADS850SAR.h b/include/configs/FADS850SAR.h
index a104176..3d04ef0 100644
--- a/include/configs/FADS850SAR.h
+++ b/include/configs/FADS850SAR.h
@@ -116,6 +116,7 @@
  * Also NOTE that it doesn't mean SDRAM - it means MEMORY.
  */
 #define	CFG_SDRAM_BASE		0x00000000
+#define	CFG_SDRAM_SIZE		(4<<20) /* standard FADS has 4M */
 #define CFG_FLASH_BASE		0x02800000
 #define CFG_FLASH_SIZE		((uint)(8 * 1024 * 1024))	/* max 8Mbyte */
 #if 0
diff --git a/include/configs/FADS860T.h b/include/configs/FADS860T.h
index 2c94389..fd56010 100644
--- a/include/configs/FADS860T.h
+++ b/include/configs/FADS860T.h
@@ -32,25 +32,33 @@
  */
 #include <mpc8xx_irq.h>
 
-#define CONFIG_MPC860		1
-#define CONFIG_MPC860T		1
-#define CONFIG_FADS		1
+/* board type */
+#define CONFIG_FADS		1       /* old/new FADS + new ADS */
+
+/* processor type */
+#define CONFIG_MPC860T		1       /* 860T */
 
 #define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
 #undef	CONFIG_8xx_CONS_SMC2
 #undef	CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE		9600
+#define CONFIG_BAUDRATE		38400
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 
-#if 0
-#define MPC8XX_FACT		10		/* Multiply by 10	*/
-#define MPC8XX_XIN		5000000			/* 5 MHz in	*/
-#else
-#define MPC8XX_FACT		12		/* Multiply by 12	*/
-#define MPC8XX_XIN		4000000			/* 4 MHz in	*/
-#define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT))
+#if 0 /* old FADS */
+# define CFG_8XX_FACT		12		/* Multiply by 12 */
+# define CFG_8XX_XIN		4000000		/* 4 MHz in	*/
+#else /* new FADS */
+# define CFG_8XX_FACT		10		/* Multiply by 10 */
+# define CFG_8XX_XIN		5000000		/* 5 MHz in	*/
 #endif
 
+#define MPC8XX_HZ ((CFG_8XX_XIN) * (CFG_8XX_FACT))
+
+/* should ALWAYS define this, measure_gclk in speed.c is unreliable */
+/* in general, we always know this for FADS+new ADS anyway */
+#define CONFIG_8xx_GCLK_FREQ     MPC8XX_HZ
+
+/* most vanilla kernels do not like this, set to 0 if in doubt */
 #define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
 
 #if 1
@@ -59,8 +67,12 @@
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
 #endif
 
-#define CONFIG_BOOTCOMMAND	"bootm 2800100"	/* autoboot command */
-#define CONFIG_BOOTARGS		""
+#undef	CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND			    \
+    "bootp; "				    \
+    "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) "	    \
+    "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; "   \
+    "bootm"
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -77,10 +89,10 @@
 /* choose SCC1 ethernet (10BASET on motherboard)
  * or FEC ethernet (10/100 on daughterboard)
  */
-#if 1
+#if 0
 #define	CONFIG_SCC1_ENET	1	/* use SCC1 ethernet */
 #undef	CONFIG_FEC_ENET			/* disable FEC ethernet  */
-#else
+#else   /* all 86x cores have FECs, if in doubt, use it */
 #undef	CONFIG_SCC1_ENET		/* disable SCC1 ethernet */
 #define	CONFIG_FEC_ENET		1	/* use FEC ethernet  */
 #define CFG_DISCOVER_PHY
@@ -107,7 +119,11 @@
 #define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
 
 #define CFG_MEMTEST_START	0x0100000	/* memtest works on	*/
+#if (CFG_SDRAM_SIZE)
+#define CFG_MEMTEST_END		CFG_SDRAM_SIZE	/* 1 ... SDRAM_SIZE	*/
+#else
 #define CFG_MEMTEST_END		0x0400000	/* 1 ... 4 MB in DRAM	*/
+#endif
 
 #define CFG_LOAD_ADDR	 	0x00100000
 
@@ -120,7 +136,7 @@
  * (address mappings, register initial values, etc.)
  * You should know what you are doing if you make changes here.
  */
-/*-----------------------------------------------------------------------
+/*----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
 #define CFG_IMMR			0xFF000000
@@ -141,6 +157,11 @@
  * Please note that CFG_SDRAM_BASE _must_ start at 0
  */
 #define	CFG_SDRAM_BASE		0x00000000
+#ifdef CONFIG_FADS
+# define	CFG_SDRAM_SIZE	0x00400000      /* 4 meg */
+#else   /* !CONFIG_FADS */ /* old ADS */
+# define	CFG_SDRAM_SIZE	0x00000000      /* NO SDRAM */
+#endif
 
 #define CFG_FLASH_BASE		0x02800000
 
@@ -218,7 +239,7 @@
  *-----------------------------------------------------------------------
  * set the PLL, the low-power modes and the reset control (15-29)
  */
-#define CFG_PLPRCR	(((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
+#define CFG_PLPRCR	(((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
 				PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
@@ -235,7 +256,7 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER		0
+#define CFG_DER		 0
 
 /* Because of the way the 860 starts up and assigns CS0 the
 * entire address space, we have to set the memory controller
@@ -280,36 +301,6 @@
 #define CFG_OR1_PRELIM	0xffff8110		/* 64Kbyte address space */
 #define CFG_BR1_PRELIM	((BCSR_ADDR) | BR_V )
 
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CFG_MAMR_PTA		97	/* start with divider for 100 MHz	*/
-
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-/* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-
-#define CFG_MAMR		0x13a01114
 /*
  * Internal Definitions
  *
@@ -425,7 +416,7 @@
 #endif /* CONFIG_MPC850 */
 
 #define CONFIG_DRAM_50MHZ		1
-#define CONFIG_SDRAM_50MHZ
+#define CONFIG_SDRAM_50MHZ              1
 
 #ifdef CONFIG_MPC860T
 
diff --git a/include/configs/IAD210.h b/include/configs/IAD210.h
index 7b76226..6dedbd7 100644
--- a/include/configs/IAD210.h
+++ b/include/configs/IAD210.h
@@ -354,7 +354,7 @@
  */
 
 #define CFG_MAMR	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLB_A11 |	\
+			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_8X)
 
 
diff --git a/include/configs/IVML24.h b/include/configs/IVML24.h
index 77746e8..a0cb1dd 100644
--- a/include/configs/IVML24.h
+++ b/include/configs/IVML24.h
@@ -424,7 +424,7 @@
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTB	204
+#define CFG_MBMR_PTB	204
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
 #define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
@@ -448,19 +448,19 @@
 
 #if defined (CONFIG_IVML24_16M)
  /* 8 column SDRAM */
-# define CFG_MBMR_8COL	((CFG_MAMR_PTB << MAMR_PTB_SHIFT)  | \
- 			 MAMR_AMB_TYPE_0 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A11 |	\
- 			 MAMR_RLFB_1X	 | MAMR_WLFB_1X	   | MAMR_TLFB_4X)
+# define CFG_MBMR_8COL	((CFG_MBMR_PTB << MBMR_PTB_SHIFT)  | \
+ 			 MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 |	\
+ 			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)
 #elif defined (CONFIG_IVML24_32M)
 /* 128 MBit SDRAM */
-# define CFG_MBMR_8COL	((CFG_MAMR_PTB << MAMR_PTB_SHIFT)  | \
-			 MAMR_AMB_TYPE_1 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A10 |	\
-			 MAMR_RLFB_1X	 | MAMR_WLFB_1X	   | MAMR_TLFB_4X)
+# define CFG_MBMR_8COL	((CFG_MBMR_PTB << MBMR_PTB_SHIFT)  | \
+			 MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 |	\
+			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)
 #elif defined (CONFIG_IVML24_64M)
 /* 128 MBit SDRAM */
-# define CFG_MBMR_8COL	((CFG_MAMR_PTB << MAMR_PTB_SHIFT)  | \
-			 MAMR_AMB_TYPE_1 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A10 |	\
-			 MAMR_RLFB_1X	 | MAMR_WLFB_1X	   | MAMR_TLFB_4X)
+# define CFG_MBMR_8COL	((CFG_MBMR_PTB << MBMR_PTB_SHIFT)  | \
+			 MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 |	\
+			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)
 #endif
 
 /*
diff --git a/include/configs/IVMS8.h b/include/configs/IVMS8.h
index 19063fa..46b4d53 100644
--- a/include/configs/IVMS8.h
+++ b/include/configs/IVMS8.h
@@ -408,7 +408,7 @@
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTB	204
+#define CFG_MBMR_PTB	204
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
 #define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
@@ -431,19 +431,19 @@
 
 #if defined (CONFIG_IVMS8_16M)
  /* 8 column SDRAM */
-# define CFG_MBMR_8COL	((CFG_MAMR_PTB << MAMR_PTB_SHIFT)  | \
- 			 MAMR_AMB_TYPE_0 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A11 |	\
- 			 MAMR_RLFB_1X	 | MAMR_WLFB_1X	   | MAMR_TLFB_4X)
+# define CFG_MBMR_8COL	((CFG_MBMR_PTB << MBMR_PTB_SHIFT)  | \
+ 			 MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 |	\
+ 			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)
 #elif defined (CONFIG_IVMS8_32M)
 /* 128 MBit SDRAM */
-#define CFG_MBMR_8COL	((CFG_MAMR_PTB << MAMR_PTB_SHIFT)  | \
-			 MAMR_AMB_TYPE_1 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A10 |	\
-			 MAMR_RLFB_1X	 | MAMR_WLFB_1X	   | MAMR_TLFB_4X)
+#define CFG_MBMR_8COL	((CFG_MBMR_PTB << MBMR_PTB_SHIFT)  | \
+			 MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 |	\
+			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)
 #elif defined (CONFIG_IVMS8_64M)
 /* 128 MBit SDRAM */
-#define CFG_MBMR_8COL	((CFG_MAMR_PTB << MAMR_PTB_SHIFT)  | \
-			 MAMR_AMB_TYPE_1 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A10 |	\
-			 MAMR_RLFB_1X	 | MAMR_WLFB_1X	   | MAMR_TLFB_4X)
+#define CFG_MBMR_8COL	((CFG_MBMR_PTB << MBMR_PTB_SHIFT)  | \
+			 MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 |	\
+			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)
 
 #endif
 
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index 401591d..5960b30 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -9,7 +9,8 @@
  *
  * (C) Copyright 2003 Arabella Software Ltd.
  * Yuli Barcohen <yuli@arabellasw.com>
- * Added support for SDRAM DIMMs SPD EEPROM, MII.
+ * Added support for SDRAM DIMMs SPD EEPROM, MII, JFFS2.
+ * Ported to PQ2FADS-ZU board.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -41,6 +42,15 @@
 #define CONFIG_MPC8260		1	/* This is an MPC8260 CPU   */
 #define CONFIG_MPC8260ADS	1	/* ...on motorola ads board */
 
+/* ADS flavours */
+#define CFG_8260ADS		1	/* MPC8260ADS */
+#define CFG_8266ADS		2	/* MPC8266ADS */
+#define CFG_PQ2FADS		3	/* PQ2FADS-ZU */
+
+#ifndef CONFIG_ADSTYPE
+#define CONFIG_ADSTYPE		CFG_8260ADS
+#endif /* CONFIG_ADSTYPE */
+
 #define CONFIG_BOARD_PRE_INIT	1	/* Call board_pre_init	*/
 
 /* allow serial and ethaddr to be overwritten */
@@ -116,7 +126,9 @@
 
 #endif /* CONFIG_ETHER_ON_FCC */
 
-/* other options */
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
+#undef CONFIG_SPD_EEPROM	/* On PQ2FADS-ZU, SDRAM is soldered  */
+#else
 #define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
 #define CFG_I2C_SLAVE		0x7F
@@ -124,18 +136,23 @@
 #if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_SPD_ADDR)
 #define CONFIG_SPD_ADDR         0x50
 #endif
+#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
 
 #ifndef CONFIG_SDRAM_PBI
 #define CONFIG_SDRAM_PBI        1 /* By default, use page-based interleaving */
 #endif
 
 #ifndef CONFIG_8260_CLKIN
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
+#define CONFIG_8260_CLKIN	100000000	/* in Hz */
+#else
 #define CONFIG_8260_CLKIN	66666666	/* in Hz */
 #endif
+#endif
+
 #define CONFIG_BAUDRATE		115200
 
-#define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
-				 CFG_CMD_BEDBUG | \
+#define CFG_EXCLUDE		 CFG_CMD_BEDBUG | \
 				 CFG_CMD_BMP	| \
 				 CFG_CMD_BSP	| \
 				 CFG_CMD_DATE	| \
@@ -143,11 +160,11 @@
 				 CFG_CMD_DTT	| \
 				 CFG_CMD_EEPROM | \
 				 CFG_CMD_ELF    | \
+				 CFG_CMD_FAT    | \
 				 CFG_CMD_FDC	| \
 				 CFG_CMD_FDOS	| \
 				 CFG_CMD_HWFLOW	| \
 				 CFG_CMD_IDE	| \
-				 CFG_CMD_JFFS2	| \
 				 CFG_CMD_KGDB	| \
 				 CFG_CMD_MMC	| \
 				 CFG_CMD_NAND	| \
@@ -155,8 +172,18 @@
 				 CFG_CMD_PCMCIA | \
 				 CFG_CMD_SCSI	| \
 				 CFG_CMD_SPI	| \
-				 CFG_CMD_VFD	| \
-				 CFG_CMD_USB	) )
+				 CFG_CMD_USB	| \
+				 CFG_CMD_VFD
+
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
+#define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
+				 CFG_CMD_SDRAM	| \
+				 CFG_CMD_I2C	| \
+				 CFG_EXCLUDE	) )
+#else
+#define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
+				 CFG_EXCLUDE	) )
+#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
@@ -200,7 +227,6 @@
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CFG_FLASH_BASE		0xff800000
-#define FLASH_BASE		0xff800000
 #define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks	*/
 #define CFG_MAX_FLASH_SECT	32	/* max num of sects on one chip */
 #define CFG_FLASH_SIZE		8
@@ -219,14 +245,16 @@
 #define CFG_DEFAULT_IMMR	0x0F010000
 
 #define CFG_IMMR		0xF0000000
-#define CFG_BCSR		0x04500000
+#define CFG_BCSR		0xF4500000
 #define CFG_SDRAM_BASE		0x00000000
-#define CFG_LSDRAM_BASE		0x04000000
+#define CFG_LSDRAM_BASE		0xD0000000
 
 #define RS232EN_1		0x02000002
 #define RS232EN_2		0x01000001
-#define FETHIEN			0x08000008
-#define FETH_RST		0x04000004
+#define FETHIEN1		0x08000008
+#define FETH1_RST		0x04000004
+#define FETHIEN2		0x01000000
+#define FETH2_RST		0x08000000
 
 #define CFG_INIT_RAM_ADDR	CFG_IMMR
 #define CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
@@ -288,19 +316,30 @@
 #define CFG_SYPCR		0xFFFFFFC3
 #define CFG_BCR			0x100C0000
 #define CFG_SIUMCR		0x0A200000
-#define CFG_SCCR		0x00000000
-#define CFG_BR0_PRELIM		0xFF801801
-#define CFG_OR0_PRELIM		0xFF800836
-#define CFG_BR1_PRELIM		0x04501801
+#define CFG_SCCR		SCCR_DFBRG01
+#define CFG_BR0_PRELIM		CFG_FLASH_BASE | 0x00001801
+#define CFG_OR0_PRELIM		0xFF800876
+#define CFG_BR1_PRELIM		CFG_BCSR | 0x00001801
 #define CFG_OR1_PRELIM		0xFFFF8010
 
-#define CFG_RMR			0
+#define CFG_RMR			RMR_CSRE
 #define CFG_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
 #define CFG_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
 #define CFG_RCCR		0
+
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
+#define CFG_PSDMR		0x824B36A3
+#define CFG_PSRT		0x13
+#define CFG_LSDMR		0x828737A3
+#define CFG_LSRT		0x13
+#define CFG_MPTPR		0x2800
+#else
 #define CFG_PSDMR		0x016EB452
-#define CFG_MPTPR		0x00001900
-#define CFG_PSRT		0x00000021
+#define CFG_PSRT		0x21
+#define CFG_LSDMR		0x0086A522
+#define CFG_LSRT		0x21
+#define CFG_MPTPR		0x1900
+#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
 
 #define CFG_RESET_ADDRESS	0x04400000
 
diff --git a/include/configs/MPC86xADS.h b/include/configs/MPC86xADS.h
new file mode 100644
index 0000000..fc79c52
--- /dev/null
+++ b/include/configs/MPC86xADS.h
@@ -0,0 +1,438 @@
+/*
+  * A collection of structures, addresses, and values associated with
+  * the Motorola MPC8xxADS board.  Copied from the FADS config.
+  *
+  * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
+  */
+
+/*
+ * 1999-nov-26: The FADS is using the following physical memorymap:
+ *
+ * ff020000 -> ff02ffff : pcmcia
+ * ff010000 -> ff01ffff : BCSR       connected to CS1, setup by 8xxrom
+ * ff000000 -> ff00ffff : IMAP       internal in the cpu
+ * fe000000 -> ffnnnnnn : flash      connected to CS0, setup by 8xxrom
+ * 00000000 -> nnnnnnnn : sdram/dram setup by 8xxrom
+ */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#include <mpc8xx_irq.h>
+
+/* board type */
+#define CONFIG_MPC86xADS        1       /* new ADS */
+#define CONFIG_FADS		1       /* We are FADS compatible (more or less) */
+
+/* new 86xADS only - pick one of these */
+#define CONFIG_MPC866T 		1
+#undef CONFIG_MPC866P
+#undef CONFIG_MPC859T
+#undef CONFIG_MPC859DSL
+#undef CONFIG_MPC852T
+
+#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
+#undef	CONFIG_8xx_CONS_SMC2
+#undef	CONFIG_8xx_CONS_NONE
+#define CONFIG_BAUDRATE		38400
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+
+#ifdef CONFIG_MPC86xADS
+# define CFG_8XX_FACT		5		/* Multiply by 5	*/
+# define CFG_8XX_XIN		10000000	/* 10 MHz in	*/
+#else /* ! CONFIG_MPC86xADS */
+# if 0 /* old FADS */
+#  define CFG_8XX_FACT		12		/* Multiply by 12 */
+#  define CFG_8XX_XIN		4000000		/* 4 MHz in	*/
+# else /* new FADS */
+#  define CFG_8XX_FACT		10		/* Multiply by 10 */
+#  define CFG_8XX_XIN		5000000		/* 5 MHz in	*/
+# endif
+#endif /* ! CONFIG_MPC86xADS */
+
+#define MPC8XX_HZ ((CFG_8XX_XIN) * (CFG_8XX_FACT))
+
+/* should ALWAYS define this, measure_gclk in speed.c is unreliable */
+/* in general, we always know this for FADS+new ADS anyway */
+#define CONFIG_8xx_GCLK_FREQ     MPC8XX_HZ
+
+/* most vanilla kernels do not like this, set to 0 if in doubt */
+#define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
+
+#if 1
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
+#else
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+#endif
+
+#undef	CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND			    \
+    "bootp; "				    \
+    "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) "	    \
+    "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; "   \
+    "bootm"
+
+/* #include "local.h" */
+
+#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+/* ATA / IDE and partition support */
+#define CONFIG_MAC_PARTITION    1
+#define CONFIG_DOS_PARTITION    1
+#define CONFIG_ISO_PARTITION	1
+#undef	CONFIG_ATAPI
+#define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
+#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
+#undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
+#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
+
+/* choose SCC1 ethernet (10BASET on motherboard)
+ * or FEC ethernet (10/100 on daughterboard)
+ */
+#if 0
+#define	CONFIG_SCC1_ENET	1	/* use SCC1 ethernet */
+#undef	CONFIG_FEC_ENET			/* disable FEC ethernet  */
+#else   /* all 86x cores have FECs, if in doubt, use it */
+#undef	CONFIG_SCC1_ENET		/* disable SCC1 ethernet */
+#define	CONFIG_FEC_ENET		1	/* use FEC ethernet  */
+#define CFG_DISCOVER_PHY
+#endif
+#if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET)
+#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured
+#endif
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#undef	CFG_LONGHELP			/* undef to save memory		*/
+#define	CFG_PROMPT		"=>"	/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0100000	/* memtest works on	*/
+#if (CFG_SDRAM_SIZE)
+#define CFG_MEMTEST_END		CFG_SDRAM_SIZE	/* 1 ... SDRAM_SIZE	*/
+#else
+#define CFG_MEMTEST_END		0x0400000     	/* 1 ... 4 MB in DRAM	*/
+#endif
+
+#define CFG_LOAD_ADDR	 	0x00100000
+
+#define	CFG_HZ		        1000		/* decr freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR		0xFF000000
+#define CFG_IMMR_SIZE		((uint)(64 * 1024))
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define	CFG_SDRAM_BASE		0x00000000
+#ifdef CONFIG_FADS
+# ifdef CONFIG_MPC86xADS /* new ADS */
+#  define	CFG_SDRAM_SIZE	0x00800000      /* 8 meg */
+# else                   /* old/new FADS */
+#  define	CFG_SDRAM_SIZE	0x00400000      /* 4 meg */
+# endif
+#else   /* !CONFIG_FADS */ /* old ADS */
+# define	CFG_SDRAM_SIZE	0x00000000      /* NO SDRAM */
+#endif
+
+#define CFG_FLASH_BASE		0x02800000
+
+#define CFG_FLASH_SIZE		((uint)(8 * 1024 * 1024))	/* max 8Mbyte */
+
+#define	CFG_MONITOR_LEN		(272 << 10)	/* Reserve 272 kB for Monitor	*/
+#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+#define	CFG_MALLOC_LEN		(384 << 10)	/* Reserve 384 kB for malloc()	*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	16      /* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define	CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_OFFSET		0x00040000
+#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+
+#define CFG_ENV_SECT_SIZE	0x40000	/* see README - env sector total size	*/
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control					11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration					11-6
+ *-----------------------------------------------------------------------
+ * PCMCIA config., multi-function pin tri-state
+ */
+#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control					11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register	15-30
+ *-----------------------------------------------------------------------
+ * set the PLL, the low-power modes and the reset control (15-29)
+ */
+#define CFG_PLPRCR	((CFG_8XX_FACT << PLPRCR_MFI_SHIFT) |	\
+				PLPRCR_SPLSS | PLPRCR_TEXPS)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register		15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+#define SCCR_MASK	SCCR_EBDF11
+#define CFG_SCCR	(SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00)
+
+ /*-----------------------------------------------------------------------
+ *
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_DER		 0
+
+/* Because of the way the 860 starts up and assigns CS0 the
+* entire address space, we have to set the memory controller
+* differently.  Normally, you write the option register
+* first, and then enable the chip select by writing the
+* base register.  For CS0, you must write the base register
+* first, followed by the option register.
+*/
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+/* the other CS:s are determined by looking at parameters in BCSRx */
+
+#define BCSR_ADDR		((uint) 0xFF010000)
+#define BCSR_SIZE		((uint)(64 * 1024))
+
+#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CFG_PRELIM_OR_AM	0xFF800000	/* OR addr mask */
+
+/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0	*/
+#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
+
+#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
+
+#ifdef USE_REAL_FLASH_VALUES
+/*
+ * The "default" behaviour with 1Mbyte initial doesn't work for us!
+ */
+#define CFG_OR0_PRELIM	0x0FFC00D34 /* Real values for the board */
+#define CFG_BR0_PRELIM	0x02800001  /* Real values for the board */
+#else
+#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)   /* 8 Mbyte until detected */
+#define CFG_BR0_PRELIM	((CFG_FLASH_BASE & BR_BA_MSK) | BR_V )
+#endif
+
+/* BCSRx - Board Control and Status Registers */
+#define CFG_OR1_REMAP	CFG_OR0_REMAP
+#define CFG_OR1_PRELIM	0xffff8110		/* 64Kbyte address space */
+#define CFG_BR1_PRELIM	((BCSR_ADDR) | BR_V )
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+/* values according to the manual */
+
+#define PCMCIA_MEM_ADDR		((uint)0xff020000)
+#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
+
+#define	BCSR0			((uint) (BCSR_ADDR + 00))
+#define	BCSR1			((uint) (BCSR_ADDR + 0x04))
+#define	BCSR2			((uint) (BCSR_ADDR + 0x08))
+#define	BCSR3			((uint) (BCSR_ADDR + 0x0c))
+#define	BCSR4			((uint) (BCSR_ADDR + 0x10))
+
+/* FADS bitvalues by Helmut Buchsbaum
+ * see MPC8xxADS User's Manual for a proper description
+ * of the following structures
+ */
+
+#define BCSR0_ERB       ((uint)0x80000000)
+#define BCSR0_IP        ((uint)0x40000000)
+#define BCSR0_BDIS      ((uint)0x10000000)
+#define BCSR0_BPS_MASK  ((uint)0x0C000000)
+#define BCSR0_ISB_MASK  ((uint)0x01800000)
+#define BCSR0_DBGC_MASK ((uint)0x00600000)
+#define BCSR0_DBPC_MASK ((uint)0x00180000)
+#define BCSR0_EBDF_MASK ((uint)0x00060000)
+
+#define BCSR1_FLASH_EN           ((uint)0x80000000)
+#define BCSR1_DRAM_EN            ((uint)0x40000000)
+#define BCSR1_ETHEN              ((uint)0x20000000)
+#define BCSR1_IRDEN              ((uint)0x10000000)
+#define BCSR1_FLASH_CFG_EN       ((uint)0x08000000)
+#define BCSR1_CNT_REG_EN_PROTECT ((uint)0x04000000)
+#define BCSR1_BCSR_EN            ((uint)0x02000000)
+#define BCSR1_RS232EN_1          ((uint)0x01000000)
+#define BCSR1_PCCEN              ((uint)0x00800000)
+#define BCSR1_PCCVCC0            ((uint)0x00400000)
+#define BCSR1_PCCVPP_MASK        ((uint)0x00300000)
+#define BCSR1_DRAM_HALF_WORD     ((uint)0x00080000)
+#define BCSR1_RS232EN_2          ((uint)0x00040000)
+#define BCSR1_SDRAM_EN           ((uint)0x00020000)
+#define BCSR1_PCCVCC1            ((uint)0x00010000)
+
+#define BCSR2_FLASH_PD_MASK      ((uint)0xF0000000)
+#define BCSR2_DRAM_PD_MASK       ((uint)0x07800000)
+#define BCSR2_DRAM_PD_SHIFT      (23)
+#define BCSR2_EXTTOLI_MASK       ((uint)0x00780000)
+#define BCSR2_DBREVNR_MASK       ((uint)0x00030000)
+
+#define BCSR3_DBID_MASK          ((ushort)0x3800)
+#define BCSR3_CNT_REG_EN_PROTECT ((ushort)0x0400)
+#define BCSR3_BREVNR0            ((ushort)0x0080)
+#define BCSR3_FLASH_PD_MASK      ((ushort)0x0070)
+#define BCSR3_BREVN1             ((ushort)0x0008)
+#define BCSR3_BREVN2_MASK        ((ushort)0x0003)
+
+#define BCSR4_ETHLOOP            ((uint)0x80000000)
+#define BCSR4_TFPLDL             ((uint)0x40000000)
+#define BCSR4_TPSQEL             ((uint)0x20000000)
+#define BCSR4_SIGNAL_LAMP        ((uint)0x10000000)
+#define BCSR4_FETH_EN            ((uint)0x08000000)
+#define BCSR4_FETHCFG0           ((uint)0x04000000)
+#define BCSR4_FETHFDE            ((uint)0x02000000)
+#define BCSR4_FETHCFG1           ((uint)0x00400000)
+#define BCSR4_FETHRST            ((uint)0x00200000)
+
+#define CONFIG_DRAM_50MHZ		1
+#define CONFIG_SDRAM_50MHZ              1
+
+/* Interrupt level assignments.
+*/
+#define FEC_INTERRUPT	SIU_LEVEL1	/* FEC interrupt */
+
+/* We don't use the 8259.
+*/
+#define NR_8259_INTS	0
+
+/* Machine type
+*/
+#define _MACH_8xx (_MACH_fads)
+
+#define CONFIG_DISK_SPINUP_TIME 1000000
+
+
+/* PCMCIA configuration */
+
+#define PCMCIA_MAX_SLOTS    2
+
+#ifdef CONFIG_MPC860
+#define PCMCIA_SLOT_A 1
+#endif
+/*#define CFG_PCMCIA_MEM_SIZE     ( 64 << 20) */
+#define CFG_PCMCIA_MEM_ADDR	(0x50000000)
+#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_DMA_ADDR	(0x54000000)
+#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_ATTRB_ADDR	(0x58000000)
+#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_IO_ADDR	(0x5C000000)
+#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+/* we have 8 windows, we take everything up to 60000000 */
+
+#define CFG_ATA_IDE0_OFFSET	0x0000
+
+#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+
+/* Offset for data I/O			*/
+#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+/* Offset for normal register accesses	*/
+#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+/* Offset for alternate registers	*/
+#define CFG_ATA_ALT_OFFSET	0x0000
+/*#define CFG_ATA_ALT_OFFSET	0x0100 */
+
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h
index 959ee1a..9746b64 100644
--- a/include/configs/RPXClassic.h
+++ b/include/configs/RPXClassic.h
@@ -331,8 +331,7 @@
  *
  */
 /* #define	CFG_DER	0x2002000F */
-/* #define CFG_DER	0 */
-#define	CFG_DER	0x0082000F
+#define CFG_DER	0
 
 /*
  * Init Memory Controller:
diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h
index 51f2c25..ae4dcc2 100644
--- a/include/configs/SPD823TS.h
+++ b/include/configs/SPD823TS.h
@@ -381,7 +381,7 @@
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTB	204
+#define CFG_MBMR_PTB	204
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
 #define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
@@ -396,9 +396,9 @@
  */
 
 /* 8 column SDRAM */
-#define CFG_MBMR_8COL	((CFG_MAMR_PTB << MAMR_PTB_SHIFT)  | \
-			 MAMR_AMB_TYPE_0 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A11 |	\
-			 MAMR_RLFB_1X	 | MAMR_WLFB_1X	   | MAMR_TLFB_4X)
+#define CFG_MBMR_8COL	((CFG_MBMR_PTB << MBMR_PTB_SHIFT)  | \
+			 MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 |	\
+			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)
 
 /*
  * Internal Definitions
diff --git a/include/configs/pcu_e.h b/include/configs/pcu_e.h
index 42877a7..31f1e56 100644
--- a/include/configs/pcu_e.h
+++ b/include/configs/pcu_e.h
@@ -518,11 +518,11 @@
 #define CFG_MAMR_PTA	0x30	/* = 48 */
 
 #define CFG_MAMR	( (CFG_MAMR_PTA << MAMR_PTA_SHIFT) | \
-			  MAMR_AMB_TYPE_1	| \
-			  MAMR_G0CLB_A10	| \
-			  MAMR_RLFB_1X		| \
-			  MAMR_WLFB_1X		| \
-			  MAMR_TLFB_8X		)
+			  MAMR_AMA_TYPE_1	| \
+			  MAMR_G0CLA_A10	| \
+			  MAMR_RLFA_1X		| \
+			  MAMR_WLFA_1X		| \
+			  MAMR_TLFA_8X		)
 
 /*
  * Internal Definitions
diff --git a/include/configs/v37.h b/include/configs/v37.h
index 6696985..45bc353 100644
--- a/include/configs/v37.h
+++ b/include/configs/v37.h
@@ -296,8 +296,7 @@
  *-----------------------------------------------------------------------
  *
  */
-#define	CFG_DER	0x0082000F
-/*#define CFG_DER	0*/
+#define CFG_DER	0
 
 /*
  * Init Memory Controller:
diff --git a/include/mpc8xx.h b/include/mpc8xx.h
index 1a65f10..e74d146 100644
--- a/include/mpc8xx.h
+++ b/include/mpc8xx.h
@@ -12,7 +12,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -121,8 +121,8 @@
  * RSR - Reset Status Register						 5-4
  */
 #define RSR_JTRS	0x01000000	/* JTAG Reset Status		*/
-#define RSR_DBSRS	0x02000000	/* Debug Port Soft Reset Status	*/
-#define RSR_DBHRS	0x04000000	/* Debug Port Hard Reset Status	*/
+#define RSR_DBSRS	0x02000000	/* Debug Port Soft Reset Status */
+#define RSR_DBHRS	0x04000000	/* Debug Port Hard Reset Status */
 #define RSR_CSRS	0x08000000	/* Check Stop Reset Status	*/
 #define RSR_SWRS	0x10000000	/* Software Watchdog Reset Status*/
 #define RSR_LLRS	0x20000000	/* Loss-of-Lock Reset Status	*/
@@ -134,21 +134,42 @@
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register			15-30
  */
-#define PLPRCR_MF_MSK	0xFFF00000	/* Multiplication factor bits		*/
+#ifdef CONFIG_MPC866_et_al
+#define PLPRCR_MF_MSK	0xffff0000	/* Multiplication factor bits		*/
+#define PLPRCR_MFN_MSK	0xf8000000	/* Multiplication factor numerator bits */
+#define PLPRCR_MFN_SHIFT 0x0000001b	/* Multiplication factor numerator shift*/
+#define PLPRCR_MFD_MSK	0x03c00000	/* Multiplication factor denominator bits */
+#define PLPRCR_MFD_SHIFT 0x00000017	/* Multiplication factor denominator shift*/
+#define PLPRCR_S_MSK	0x00300000	/* Multiplication factor integer bits */
+#define PLPRCR_S_SHIFT	0x00000014	/* Multiplication factor integer shift*/
+#define PLPRCR_MFI_MSK	0x000f0000	/* Multiplication factor integer bits */
+#define PLPRCR_MFI_SHIFT 0x00000010	/* Multiplication factor integer shift*/
+#else
+#define PLPRCR_MF_MSK	0xfff00000	/* Multiplication factor bits		*/
 #define PLPRCR_MF_SHIFT 0x00000014	/* Multiplication factor shift value	*/
+#endif
 #define PLPRCR_SPLSS	0x00008000	/* SPLL Lock Status Sticky bit		*/
 #define PLPRCR_TEXPS	0x00004000	/* TEXP Status				*/
+#ifndef CONFIG_MPC866_et_al
 #define PLPRCR_TMIST	0x00001000	/* Timers Interrupt Status		*/
+#endif
 #define PLPRCR_CSRC	0x00000400	/* Clock Source				*/
+#ifndef CONFIG_MPC866_et_al
 #define PLPRCR_LPM_MSK	0x00000300	/* Low Power Mode mask			*/
 #define PLPRCR_LPM_NORMAL 0x00000000	/* normal power management mode		*/
 #define PLPRCR_LPM_DOZE	  0x00000100	/* doze power management mode		*/
 #define PLPRCR_LPM_SLEEP  0x00000200	/* sleep power management mode		*/
 #define PLPRCR_LPM_DEEP_SLEEP 0x00000300 /* deep sleep power mgt mode		*/
 #define PLPRCR_LPM_DOWN	  0x00000300	/* down power management mode		*/
+#endif
 #define PLPRCR_CSR	0x00000080	/* CheskStop Reset value		*/
 #define PLPRCR_LOLRE	0x00000040	/* Loss Of Lock Reset Enable		*/
 #define PLPRCR_FIOPD	0x00000020	/* Force I/O Pull Down			*/
+#ifdef CONFIG_MPC866_et_al
+#define PLPRCR_PDF_MSK	0x0000001e	/* Predivision Factor bits		*/
+#define PLPRCR_PDF_SHIFT 0x00000001	/* Predivision Factor shift value	*/
+#define PLPRCR_DBRMO	0x00000001	/* DPLL BRM Order bit			*/
+#endif
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register			15-27
@@ -261,8 +282,8 @@
  * MCR - Memory Command Register
  */
 #define MCR_OP_WRITE	0x00000000	/* WRITE command			*/
-#define MCR_OP_READ	0x40000000	/* READ  command			*/
-#define MCR_OP_RUN	0x80000000	/* RUN   command			*/
+#define MCR_OP_READ	0x40000000	/* READ	 command			*/
+#define MCR_OP_RUN	0x80000000	/* RUN	 command			*/
 #define MCR_UPM_A	0x00000000	/* Select UPM A				*/
 #define MCR_UPM_B	0x00800000	/* Select UPM B				*/
 #define MCR_MB_CS0	0x00000000	/* Use Chip Select /CS0			*/
@@ -359,138 +380,138 @@
 /*-----------------------------------------------------------------------
  * Machine B Mode Register						16-13
  */
-#define MAMR_PTB_MSK	0xFF000000	/* Periodic Timer B period mask		*/
-#define MAMR_PTB_SHIFT	0x00000018	/* Periodic Timer B period shift	*/
-#define MAMR_PTBE	0x00800000	/* Periodic Timer B Enable		*/
-#define MAMR_AMB_MSK	0x00700000	/* Addess Multiplex size B		*/
-#define MAMR_AMB_TYPE_0 0x00000000	/* Addess Multiplexing Type 0		*/
-#define MAMR_AMB_TYPE_1 0x00100000	/* Addess Multiplexing Type 1		*/
-#define MAMR_AMB_TYPE_2 0x00200000	/* Addess Multiplexing Type 2		*/
-#define MAMR_AMB_TYPE_3 0x00300000	/* Addess Multiplexing Type 3		*/
-#define MAMR_AMB_TYPE_4 0x00400000	/* Addess Multiplexing Type 4		*/
-#define MAMR_AMB_TYPE_5 0x00500000	/* Addess Multiplexing Type 5		*/
-#define MAMR_DSB_MSK	0x00060000	/* Disable Timer period mask		*/
-#define MAMR_DSB_1_CYCL 0x00000000	/* 1 cycle Disable Period		*/
-#define MAMR_DSB_2_CYCL 0x00020000	/* 2 cycle Disable Period		*/
-#define MAMR_DSB_3_CYCL 0x00040000	/* 3 cycle Disable Period		*/
-#define MAMR_DSB_4_CYCL 0x00060000	/* 4 cycle Disable Period		*/
-#define MAMR_G0CLB_MSK	0x0000E000	/* General Line 0 Control B		*/
-#define MAMR_G0CLB_A12	0x00000000	/* General Line 0 : A12			*/
-#define MAMR_G0CLB_A11	0x00002000	/* General Line 0 : A11			*/
-#define MAMR_G0CLB_A10	0x00004000	/* General Line 0 : A10			*/
-#define MAMR_G0CLB_A9	0x00006000	/* General Line 0 : A9			*/
-#define MAMR_G0CLB_A8	0x00008000	/* General Line 0 : A8			*/
-#define MAMR_G0CLB_A7	0x0000A000	/* General Line 0 : A7			*/
-#define MAMR_G0CLB_A6	0x0000C000	/* General Line 0 : A6			*/
-#define MAMR_G0CLB_A5	0x0000E000	/* General Line 0 : A5			*/
-#define MAMR_GPL_B4DIS	0x00001000	/* GPL_B4 ouput line Disable		*/
-#define MAMR_RLFB_MSK	0x00000F00	/* Read Loop Field B mask		*/
-#define MAMR_RLFB_1X	0x00000100	/* The Read Loop is executed 1 time	*/
-#define MAMR_RLFB_2X	0x00000200	/* The Read Loop is executed 2 times	*/
-#define MAMR_RLFB_3X	0x00000300	/* The Read Loop is executed 3 times	*/
-#define MAMR_RLFB_4X	0x00000400	/* The Read Loop is executed 4 times	*/
-#define MAMR_RLFB_5X	0x00000500	/* The Read Loop is executed 5 times	*/
-#define MAMR_RLFB_6X	0x00000600	/* The Read Loop is executed 6 times	*/
-#define MAMR_RLFB_7X	0x00000700	/* The Read Loop is executed 7 times	*/
-#define MAMR_RLFB_8X	0x00000800	/* The Read Loop is executed 8 times	*/
-#define MAMR_RLFB_9X	0x00000900	/* The Read Loop is executed 9 times	*/
-#define MAMR_RLFB_10X	0x00000A00	/* The Read Loop is executed 10 times	*/
-#define MAMR_RLFB_11X	0x00000B00	/* The Read Loop is executed 11 times	*/
-#define MAMR_RLFB_12X	0x00000C00	/* The Read Loop is executed 12 times	*/
-#define MAMR_RLFB_13X	0x00000D00	/* The Read Loop is executed 13 times	*/
-#define MAMR_RLFB_14X	0x00000E00	/* The Read Loop is executed 14 times	*/
-#define MAMR_RLFB_15X	0x00000f00	/* The Read Loop is executed 15 times	*/
-#define MAMR_RLFB_16X	0x00000000	/* The Read Loop is executed 16 times	*/
-#define MAMR_WLFB_MSK	0x000000F0	/* Write Loop Field B mask		*/
-#define MAMR_WLFB_1X	0x00000010	/* The Write Loop is executed 1 time	*/
-#define MAMR_WLFB_2X	0x00000020	/* The Write Loop is executed 2 times	*/
-#define MAMR_WLFB_3X	0x00000030	/* The Write Loop is executed 3 times	*/
-#define MAMR_WLFB_4X	0x00000040	/* The Write Loop is executed 4 times	*/
-#define MAMR_WLFB_5X	0x00000050	/* The Write Loop is executed 5 times	*/
-#define MAMR_WLFB_6X	0x00000060	/* The Write Loop is executed 6 times	*/
-#define MAMR_WLFB_7X	0x00000070	/* The Write Loop is executed 7 times	*/
-#define MAMR_WLFB_8X	0x00000080	/* The Write Loop is executed 8 times	*/
-#define MAMR_WLFB_9X	0x00000090	/* The Write Loop is executed 9 times	*/
-#define MAMR_WLFB_10X	0x000000A0	/* The Write Loop is executed 10 times	*/
-#define MAMR_WLFB_11X	0x000000B0	/* The Write Loop is executed 11 times	*/
-#define MAMR_WLFB_12X	0x000000C0	/* The Write Loop is executed 12 times	*/
-#define MAMR_WLFB_13X	0x000000D0	/* The Write Loop is executed 13 times	*/
-#define MAMR_WLFB_14X	0x000000E0	/* The Write Loop is executed 14 times	*/
-#define MAMR_WLFB_15X	0x000000F0	/* The Write Loop is executed 15 times	*/
-#define MAMR_WLFB_16X	0x00000000	/* The Write Loop is executed 16 times	*/
-#define MAMR_TLFB_MSK	0x0000000F	/* Timer Loop Field B mask		*/
-#define MAMR_TLFB_1X	0x00000001	/* The Timer Loop is executed 1 time	*/
-#define MAMR_TLFB_2X	0x00000002	/* The Timer Loop is executed 2 times	*/
-#define MAMR_TLFB_3X	0x00000003	/* The Timer Loop is executed 3 times	*/
-#define MAMR_TLFB_4X	0x00000004	/* The Timer Loop is executed 4 times	*/
-#define MAMR_TLFB_5X	0x00000005	/* The Timer Loop is executed 5 times	*/
-#define MAMR_TLFB_6X	0x00000006	/* The Timer Loop is executed 6 times	*/
-#define MAMR_TLFB_7X	0x00000007	/* The Timer Loop is executed 7 times	*/
-#define MAMR_TLFB_8X	0x00000008	/* The Timer Loop is executed 8 times	*/
-#define MAMR_TLFB_9X	0x00000009	/* The Timer Loop is executed 9 times	*/
-#define MAMR_TLFB_10X	0x0000000A	/* The Timer Loop is executed 10 times	*/
-#define MAMR_TLFB_11X	0x0000000B	/* The Timer Loop is executed 11 times	*/
-#define MAMR_TLFB_12X	0x0000000C	/* The Timer Loop is executed 12 times	*/
-#define MAMR_TLFB_13X	0x0000000D	/* The Timer Loop is executed 13 times	*/
-#define MAMR_TLFB_14X	0x0000000E	/* The Timer Loop is executed 14 times	*/
-#define MAMR_TLFB_15X	0x0000000F	/* The Timer Loop is executed 15 times	*/
-#define MAMR_TLFB_16X	0x00000000	/* The Timer Loop is executed 16 times	*/
+#define MBMR_PTB_MSK	0xFF000000	/* Periodic Timer B period mask		*/
+#define MBMR_PTB_SHIFT	0x00000018	/* Periodic Timer B period shift	*/
+#define MBMR_PTBE	0x00800000	/* Periodic Timer B Enable		*/
+#define MBMR_AMB_MSK	0x00700000	/* Addess Multiplex size B		*/
+#define MBMR_AMB_TYPE_0 0x00000000	/* Addess Multiplexing Type 0		*/
+#define MBMR_AMB_TYPE_1 0x00100000	/* Addess Multiplexing Type 1		*/
+#define MBMR_AMB_TYPE_2 0x00200000	/* Addess Multiplexing Type 2		*/
+#define MBMR_AMB_TYPE_3 0x00300000	/* Addess Multiplexing Type 3		*/
+#define MBMR_AMB_TYPE_4 0x00400000	/* Addess Multiplexing Type 4		*/
+#define MBMR_AMB_TYPE_5 0x00500000	/* Addess Multiplexing Type 5		*/
+#define MBMR_DSB_MSK	0x00060000	/* Disable Timer period mask		*/
+#define MBMR_DSB_1_CYCL 0x00000000	/* 1 cycle Disable Period		*/
+#define MBMR_DSB_2_CYCL 0x00020000	/* 2 cycle Disable Period		*/
+#define MBMR_DSB_3_CYCL 0x00040000	/* 3 cycle Disable Period		*/
+#define MBMR_DSB_4_CYCL 0x00060000	/* 4 cycle Disable Period		*/
+#define MBMR_G0CLB_MSK	0x0000E000	/* General Line 0 Control B		*/
+#define MBMR_G0CLB_A12	0x00000000	/* General Line 0 : A12			*/
+#define MBMR_G0CLB_A11	0x00002000	/* General Line 0 : A11			*/
+#define MBMR_G0CLB_A10	0x00004000	/* General Line 0 : A10			*/
+#define MBMR_G0CLB_A9	0x00006000	/* General Line 0 : A9			*/
+#define MBMR_G0CLB_A8	0x00008000	/* General Line 0 : A8			*/
+#define MBMR_G0CLB_A7	0x0000A000	/* General Line 0 : A7			*/
+#define MBMR_G0CLB_A6	0x0000C000	/* General Line 0 : A6			*/
+#define MBMR_G0CLB_A5	0x0000E000	/* General Line 0 : A5			*/
+#define MBMR_GPL_B4DIS	0x00001000	/* GPL_B4 ouput line Disable		*/
+#define MBMR_RLFB_MSK	0x00000F00	/* Read Loop Field B mask		*/
+#define MBMR_RLFB_1X	0x00000100	/* The Read Loop is executed 1 time	*/
+#define MBMR_RLFB_2X	0x00000200	/* The Read Loop is executed 2 times	*/
+#define MBMR_RLFB_3X	0x00000300	/* The Read Loop is executed 3 times	*/
+#define MBMR_RLFB_4X	0x00000400	/* The Read Loop is executed 4 times	*/
+#define MBMR_RLFB_5X	0x00000500	/* The Read Loop is executed 5 times	*/
+#define MBMR_RLFB_6X	0x00000600	/* The Read Loop is executed 6 times	*/
+#define MBMR_RLFB_7X	0x00000700	/* The Read Loop is executed 7 times	*/
+#define MBMR_RLFB_8X	0x00000800	/* The Read Loop is executed 8 times	*/
+#define MBMR_RLFB_9X	0x00000900	/* The Read Loop is executed 9 times	*/
+#define MBMR_RLFB_10X	0x00000A00	/* The Read Loop is executed 10 times	*/
+#define MBMR_RLFB_11X	0x00000B00	/* The Read Loop is executed 11 times	*/
+#define MBMR_RLFB_12X	0x00000C00	/* The Read Loop is executed 12 times	*/
+#define MBMR_RLFB_13X	0x00000D00	/* The Read Loop is executed 13 times	*/
+#define MBMR_RLFB_14X	0x00000E00	/* The Read Loop is executed 14 times	*/
+#define MBMR_RLFB_15X	0x00000f00	/* The Read Loop is executed 15 times	*/
+#define MBMR_RLFB_16X	0x00000000	/* The Read Loop is executed 16 times	*/
+#define MBMR_WLFB_MSK	0x000000F0	/* Write Loop Field B mask		*/
+#define MBMR_WLFB_1X	0x00000010	/* The Write Loop is executed 1 time	*/
+#define MBMR_WLFB_2X	0x00000020	/* The Write Loop is executed 2 times	*/
+#define MBMR_WLFB_3X	0x00000030	/* The Write Loop is executed 3 times	*/
+#define MBMR_WLFB_4X	0x00000040	/* The Write Loop is executed 4 times	*/
+#define MBMR_WLFB_5X	0x00000050	/* The Write Loop is executed 5 times	*/
+#define MBMR_WLFB_6X	0x00000060	/* The Write Loop is executed 6 times	*/
+#define MBMR_WLFB_7X	0x00000070	/* The Write Loop is executed 7 times	*/
+#define MBMR_WLFB_8X	0x00000080	/* The Write Loop is executed 8 times	*/
+#define MBMR_WLFB_9X	0x00000090	/* The Write Loop is executed 9 times	*/
+#define MBMR_WLFB_10X	0x000000A0	/* The Write Loop is executed 10 times	*/
+#define MBMR_WLFB_11X	0x000000B0	/* The Write Loop is executed 11 times	*/
+#define MBMR_WLFB_12X	0x000000C0	/* The Write Loop is executed 12 times	*/
+#define MBMR_WLFB_13X	0x000000D0	/* The Write Loop is executed 13 times	*/
+#define MBMR_WLFB_14X	0x000000E0	/* The Write Loop is executed 14 times	*/
+#define MBMR_WLFB_15X	0x000000F0	/* The Write Loop is executed 15 times	*/
+#define MBMR_WLFB_16X	0x00000000	/* The Write Loop is executed 16 times	*/
+#define MBMR_TLFB_MSK	0x0000000F	/* Timer Loop Field B mask		*/
+#define MBMR_TLFB_1X	0x00000001	/* The Timer Loop is executed 1 time	*/
+#define MBMR_TLFB_2X	0x00000002	/* The Timer Loop is executed 2 times	*/
+#define MBMR_TLFB_3X	0x00000003	/* The Timer Loop is executed 3 times	*/
+#define MBMR_TLFB_4X	0x00000004	/* The Timer Loop is executed 4 times	*/
+#define MBMR_TLFB_5X	0x00000005	/* The Timer Loop is executed 5 times	*/
+#define MBMR_TLFB_6X	0x00000006	/* The Timer Loop is executed 6 times	*/
+#define MBMR_TLFB_7X	0x00000007	/* The Timer Loop is executed 7 times	*/
+#define MBMR_TLFB_8X	0x00000008	/* The Timer Loop is executed 8 times	*/
+#define MBMR_TLFB_9X	0x00000009	/* The Timer Loop is executed 9 times	*/
+#define MBMR_TLFB_10X	0x0000000A	/* The Timer Loop is executed 10 times	*/
+#define MBMR_TLFB_11X	0x0000000B	/* The Timer Loop is executed 11 times	*/
+#define MBMR_TLFB_12X	0x0000000C	/* The Timer Loop is executed 12 times	*/
+#define MBMR_TLFB_13X	0x0000000D	/* The Timer Loop is executed 13 times	*/
+#define MBMR_TLFB_14X	0x0000000E	/* The Timer Loop is executed 14 times	*/
+#define MBMR_TLFB_15X	0x0000000F	/* The Timer Loop is executed 15 times	*/
+#define MBMR_TLFB_16X	0x00000000	/* The Timer Loop is executed 16 times	*/
 
 /*-----------------------------------------------------------------------
  * Timer Global Configuration Register					18-8
  */
 #define TGCR_CAS4	0x8000		/* Cascade Timer 3 and 4	*/
 #define TGCR_FRZ4	0x4000		/* Freeze timer 4		*/
-#define TGCR_STP4	0x2000		/* Stop timer   4		*/
-#define TGCR_RST4	0x1000		/* Reset timer  4		*/
+#define TGCR_STP4	0x2000		/* Stop timer	4		*/
+#define TGCR_RST4	0x1000		/* Reset timer	4		*/
 #define TGCR_GM2	0x0800		/* Gate Mode for Pin 2		*/
 #define TGCR_FRZ3	0x0400		/* Freeze timer 3		*/
-#define TGCR_STP3	0x0200		/* Stop timer   3		*/
-#define TGCR_RST3	0x0100		/* Reset timer  3		*/
+#define TGCR_STP3	0x0200		/* Stop timer	3		*/
+#define TGCR_RST3	0x0100		/* Reset timer	3		*/
 #define TGCR_CAS2	0x0080		/* Cascade Timer 1 and 2	*/
 #define TGCR_FRZ2	0x0040		/* Freeze timer 2		*/
-#define TGCR_STP2	0x0020		/* Stop timer   2		*/
-#define TGCR_RST2	0x0010		/* Reset timer  2		*/
+#define TGCR_STP2	0x0020		/* Stop timer	2		*/
+#define TGCR_RST2	0x0010		/* Reset timer	2		*/
 #define TGCR_GM1	0x0008		/* Gate Mode for Pin 1		*/
 #define TGCR_FRZ1	0x0004		/* Freeze timer 1		*/
-#define TGCR_STP1	0x0002		/* Stop timer   1		*/
-#define TGCR_RST1	0x0001		/* Reset timer  1		*/
+#define TGCR_STP1	0x0002		/* Stop timer	1		*/
+#define TGCR_RST1	0x0001		/* Reset timer	1		*/
 
 
 /*-----------------------------------------------------------------------
  * Timer Mode Register							18-9
  */
-#define TMR_PS_MSK              0xFF00  /* Prescaler Value 			*/
-#define TMR_PS_SHIFT                 8  /* Prescaler position			*/
-#define TMR_CE_MSK              0x00C0  /* Capture Edge and Enable Interrupt	*/
-#define TMR_CE_INTR_DIS         0x0000  /* Disable Interrupt on capture event 	*/
-#define TMR_CE_RISING           0x0040  /* Capture on Rising TINx edge only 	*/
-#define TMR_CE_FALLING          0x0080  /* Capture on Falling TINx edge only 	*/
-#define TMR_CE_ANY              0x00C0  /* Capture on any TINx edge 		*/
-#define TMR_OM                  0x0020  /* Output Mode 				*/
-#define TMR_ORI                 0x0010  /* Output Reference Interrupt Enable	*/
-#define TMR_FRR                 0x0008  /* Free Run/Restart 			*/
-#define TMR_ICLK_MSK            0x0006  /* Timer Input Clock Source mask 	*/
-#define TMR_ICLK_IN_CAS         0x0000  /* Internally cascaded input 		*/
-#define TMR_ICLK_IN_GEN         0x0002  /* Internal General system clock	*/
-#define TMR_ICLK_IN_GEN_DIV16   0x0004  /* Internal General system clk div 16  	*/
-#define TMR_ICLK_TIN_PIN        0x0006  /* TINx pin 				*/
-#define TMR_GE                  0x0001  /* Gate Enable  			*/
+#define TMR_PS_MSK		0xFF00	/* Prescaler Value			*/
+#define TMR_PS_SHIFT		     8	/* Prescaler position			*/
+#define TMR_CE_MSK		0x00C0	/* Capture Edge and Enable Interrupt	*/
+#define TMR_CE_INTR_DIS		0x0000	/* Disable Interrupt on capture event	*/
+#define TMR_CE_RISING		0x0040	/* Capture on Rising TINx edge only	*/
+#define TMR_CE_FALLING		0x0080	/* Capture on Falling TINx edge only	*/
+#define TMR_CE_ANY		0x00C0	/* Capture on any TINx edge		*/
+#define TMR_OM			0x0020	/* Output Mode				*/
+#define TMR_ORI			0x0010	/* Output Reference Interrupt Enable	*/
+#define TMR_FRR			0x0008	/* Free Run/Restart			*/
+#define TMR_ICLK_MSK		0x0006	/* Timer Input Clock Source mask	*/
+#define TMR_ICLK_IN_CAS		0x0000	/* Internally cascaded input		*/
+#define TMR_ICLK_IN_GEN		0x0002	/* Internal General system clock	*/
+#define TMR_ICLK_IN_GEN_DIV16	0x0004	/* Internal General system clk div 16	*/
+#define TMR_ICLK_TIN_PIN	0x0006	/* TINx pin				*/
+#define TMR_GE			0x0001	/* Gate Enable				*/
 
 
 /*-----------------------------------------------------------------------
  * I2C Controller Registers
  */
-#define	I2MOD_REVD		0x20	/* Reverese Data			*/
+#define I2MOD_REVD		0x20	/* Reverese Data			*/
 #define I2MOD_GCD		0x10	/* General Call Disable			*/
 #define I2MOD_FLT		0x08	/* Clock Filter				*/
 #define I2MOD_PDIV32		0x00	/* Pre-Divider 32			*/
 #define I2MOD_PDIV16		0x02	/* Pre-Divider 16			*/
-#define I2MOD_PDIV8		0x04	/* Pre-Divider  8			*/
-#define I2MOD_PDIV4		0x06	/* Pre-Divider  4			*/
+#define I2MOD_PDIV8		0x04	/* Pre-Divider	8			*/
+#define I2MOD_PDIV4		0x06	/* Pre-Divider	4			*/
 #define I2MOD_EN		0x01	/* Enable				*/
 
-#define	I2CER_TXE		0x10	/* Tx Error				*/
+#define I2CER_TXE		0x10	/* Tx Error				*/
 #define I2CER_BSY		0x04	/* Busy Condition			*/
 #define I2CER_TXB		0x02	/* Tx Buffer Transmitted		*/
 #define I2CER_RXB		0x01	/* Rx Buffer Received			*/
@@ -514,7 +535,7 @@
 /*-----------------------------------------------------------------------
  * PCMCIA Interface General Control Register				17-12
  */
-#define	PCMCIA_GCRX_CXRESET	0x00000040
+#define PCMCIA_GCRX_CXRESET	0x00000040
 #define PCMCIA_GCRX_CXOE	0x00000080
 
 #define PCMCIA_VS1(slot)	(0x80000000 >> (slot << 4))
@@ -539,36 +560,36 @@
  *
  * Bank Sizes:
  */
-#define PCMCIA_BSIZE_1		0x00000000	/* Bank size:   1 Bytes	*/
-#define PCMCIA_BSIZE_2		0x08000000	/* Bank size:   2 Bytes	*/
-#define PCMCIA_BSIZE_4		0x18000000	/* Bank size:   4 Bytes	*/
-#define PCMCIA_BSIZE_8		0x10000000	/* Bank size:   8 Bytes	*/
-#define PCMCIA_BSIZE_16		0x30000000	/* Bank size:  16 Bytes	*/
-#define PCMCIA_BSIZE_32		0x38000000	/* Bank size:  32 Bytes	*/
-#define PCMCIA_BSIZE_64		0x28000000	/* Bank size:  64 Bytes	*/
-#define PCMCIA_BSIZE_128	0x20000000	/* Bank size: 128 Bytes	*/
-#define PCMCIA_BSIZE_256	0x60000000	/* Bank size: 256 Bytes	*/
-#define PCMCIA_BSIZE_512	0x68000000	/* Bank size: 512 Bytes	*/
-#define PCMCIA_BSIZE_1K		0x78000000	/* Bank size:   1 kB	*/
-#define PCMCIA_BSIZE_2K		0x70000000	/* Bank size:   2 kB	*/
-#define PCMCIA_BSIZE_4K		0x50000000	/* Bank size:   4 kB	*/
-#define PCMCIA_BSIZE_8K		0x58000000	/* Bank size:   8 kB	*/
+#define PCMCIA_BSIZE_1		0x00000000	/* Bank size:	1 Bytes */
+#define PCMCIA_BSIZE_2		0x08000000	/* Bank size:	2 Bytes */
+#define PCMCIA_BSIZE_4		0x18000000	/* Bank size:	4 Bytes */
+#define PCMCIA_BSIZE_8		0x10000000	/* Bank size:	8 Bytes */
+#define PCMCIA_BSIZE_16		0x30000000	/* Bank size:  16 Bytes */
+#define PCMCIA_BSIZE_32		0x38000000	/* Bank size:  32 Bytes */
+#define PCMCIA_BSIZE_64		0x28000000	/* Bank size:  64 Bytes */
+#define PCMCIA_BSIZE_128	0x20000000	/* Bank size: 128 Bytes */
+#define PCMCIA_BSIZE_256	0x60000000	/* Bank size: 256 Bytes */
+#define PCMCIA_BSIZE_512	0x68000000	/* Bank size: 512 Bytes */
+#define PCMCIA_BSIZE_1K		0x78000000	/* Bank size:	1 kB	*/
+#define PCMCIA_BSIZE_2K		0x70000000	/* Bank size:	2 kB	*/
+#define PCMCIA_BSIZE_4K		0x50000000	/* Bank size:	4 kB	*/
+#define PCMCIA_BSIZE_8K		0x58000000	/* Bank size:	8 kB	*/
 #define PCMCIA_BSIZE_16K	0x48000000	/* Bank size:  16 kB	*/
 #define PCMCIA_BSIZE_32K	0x40000000	/* Bank size:  32 kB	*/
 #define PCMCIA_BSIZE_64K	0xC0000000	/* Bank size:  64 kB	*/
 #define PCMCIA_BSIZE_128K	0xC8000000	/* Bank size: 128 kB	*/
 #define PCMCIA_BSIZE_256K	0xD8000000	/* Bank size: 256 kB	*/
 #define PCMCIA_BSIZE_512K	0xD0000000	/* Bank size: 512 kB	*/
-#define PCMCIA_BSIZE_1M		0xF0000000	/* Bank size:   1 MB	*/
-#define PCMCIA_BSIZE_2M		0xF8000000	/* Bank size:   2 MB	*/
-#define PCMCIA_BSIZE_4M		0xE8000000	/* Bank size:   4 MB	*/
-#define PCMCIA_BSIZE_8M		0xE0000000	/* Bank size:   8 MB	*/
+#define PCMCIA_BSIZE_1M		0xF0000000	/* Bank size:	1 MB	*/
+#define PCMCIA_BSIZE_2M		0xF8000000	/* Bank size:	2 MB	*/
+#define PCMCIA_BSIZE_4M		0xE8000000	/* Bank size:	4 MB	*/
+#define PCMCIA_BSIZE_8M		0xE0000000	/* Bank size:	8 MB	*/
 #define PCMCIA_BSIZE_16M	0xA0000000	/* Bank size:  16 MB	*/
 #define PCMCIA_BSIZE_32M	0xA8000000	/* Bank size:  32 MB	*/
 #define PCMCIA_BSIZE_64M	0xB8000000	/* Bank size:  64 MB	*/
 
 /* PCMCIA Timing */
-#define PCMCIA_SHT(t)	((t & 0x0F)<<16)	/* Strobe Hold  Time 	*/
+#define PCMCIA_SHT(t)	((t & 0x0F)<<16)	/* Strobe Hold	Time	*/
 #define PCMCIA_SST(t)	((t & 0x0F)<<12)	/* Strobe Setup Time	*/
 #define PCMCIA_SL(t) ((t==32) ? 0 : ((t & 0x1F)<<7)) /* Strobe Length	*/
 
@@ -579,10 +600,10 @@
 /* PCMCIA Region Select */
 #define PCMCIA_PRS_MEM		0x00000000	/* Common Memory Space	*/
 #define PCMCIA_PRS_ATTR		0x00000010	/*     Attribute Space	*/
-#define PCMCIA_PRS_IO		0x00000018	/*           I/O Space	*/
-#define PCMCIA_PRS_DMA		0x00000020	/* DMA, normal transfer	*/
+#define PCMCIA_PRS_IO		0x00000018	/*	     I/O Space	*/
+#define PCMCIA_PRS_DMA		0x00000020	/* DMA, normal transfer */
 #define PCMCIA_PRS_DMA_LAST	0x00000028	/* DMA, last transactn	*/
-#define PCMCIA_PRS_CEx		0x00000030	/* A[22:23] ==> CE1,CE2	*/
+#define PCMCIA_PRS_CEx		0x00000030	/* A[22:23] ==> CE1,CE2 */
 
 #define PCMCIA_PSLOT_A		0x00000000	/* Slot A		*/
 #define PCMCIA_PSLOT_B		0x00000004	/* Slot B		*/
diff --git a/include/pcmcia.h b/include/pcmcia.h
index 1609632..388b149 100644
--- a/include/pcmcia.h
+++ b/include/pcmcia.h
@@ -43,7 +43,7 @@
 #elif defined(CONFIG_ADS)		/* The ADS  board use SLOT_A	*/
 # define CONFIG_PCMCIA_SLOT_A
 #elif defined(CONFIG_FADS)		/* The FADS series are a mess	*/
-# if defined(CONFIG_MPC860T) || defined(CONFIG_MPC860) || defined(CONFIG_MPC821)
+# if defined(CONFIG_MPC86x || defined(CONFIG_MPC821)
 #  define CONFIG_PCMCIA_SLOT_A
 # else
 #  define CONFIG_PCMCIA_SLOT_B
diff --git a/include/version.h b/include/version.h
index fb7411e..e3ce8be 100644
--- a/include/version.h
+++ b/include/version.h
@@ -24,6 +24,6 @@
 #ifndef	__VERSION_H__
 #define	__VERSION_H__
 
-#define	U_BOOT_VERSION	"U-Boot 0.4.4"
+#define	U_BOOT_VERSION	"U-Boot 0.4.5"
 
 #endif	/* __VERSION_H__ */