Merge branch 'upstream'

65 files changed, 3564 insertions, 754 deletions

diff --git a/include/asm-arm/arch-arm720t/hardware.h b/include/asm-arm/arch-arm720t/hardware.h
index 1e9cd41..3056ca7 100644
--- a/include/asm-arm/arch-arm720t/hardware.h
+++ b/include/asm-arm/arch-arm720t/hardware.h
@@ -36,8 +36,6 @@
 /* include armadillo specific hardware file if there was one */
 #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
 /* include IntegratorCP/CM720T specific hardware file if there was one */
-#elif defined(CONFIG_LPC2292)
-#include <asm-arm/arch-arm720t/lpc2292_registers.h>
 #else
 #error No hardware file defined for this configuration
 #endif
diff --git a/include/asm-arm/arch-lpc2292/hardware.h b/include/asm-arm/arch-lpc2292/hardware.h
new file mode 100644
index 0000000..fd2b464
--- /dev/null
+++ b/include/asm-arm/arch-lpc2292/hardware.h
@@ -0,0 +1,33 @@
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * Copyright (c) 2004	Cucy Systems (http://www.cucy.com)
+ * Curt Brune <curt@cucy.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#if defined(CONFIG_LPC2292)
+#include <asm-arm/arch-lpc2292/lpc2292_registers.h>
+#else
+#error No hardware file defined for this configuration
+#endif
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-arm720t/lpc2292_registers.h b/include/asm-arm/arch-lpc2292/lpc2292_registers.h
index 5715f3e..5715f3e 100644
--- a/include/asm-arm/arch-arm720t/lpc2292_registers.h
+++ b/include/asm-arm/arch-lpc2292/lpc2292_registers.h
diff --git a/include/asm-arm/arch-arm720t/mmc.h b/include/asm-arm/arch-lpc2292/mmc.h
index e664a5f..e664a5f 100644
--- a/include/asm-arm/arch-arm720t/mmc.h
+++ b/include/asm-arm/arch-lpc2292/mmc.h
diff --git a/include/asm-arm/arch-lpc2292/spi.h b/include/asm-arm/arch-lpc2292/spi.h
new file mode 100644
index 0000000..6ae66e8
--- /dev/null
+++ b/include/asm-arm/arch-lpc2292/spi.h
@@ -0,0 +1,82 @@
+/*
+    This file defines the interface to the lpc22xx SPI module.
+    Copyright (C) 2006  Embedded Artists AB (www.embeddedartists.com)
+
+    This file may be included in software not adhering to the GPL.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#ifndef SPI_H
+#define SPI_H
+
+#include <config.h>
+#include <common.h>
+#include <asm/errno.h>
+#include <asm/arch/hardware.h>
+
+#define SPIF 0x80
+
+#define spi_lock() disable_interrupts();
+#define spi_unlock() enable_interrupts();
+
+extern unsigned long spi_flags;
+extern unsigned char spi_idle;
+
+int spi_init(void);
+
+static inline unsigned char spi_read(void)
+{
+	unsigned char b;
+
+	PUT8(S0SPDR, spi_idle);
+	while (!(GET8(S0SPSR) & SPIF));
+	b = GET8(S0SPDR);
+
+	return b;
+}
+
+static inline void spi_write(unsigned char b)
+{
+	PUT8(S0SPDR, b);
+	while (!(GET8(S0SPSR) & SPIF));
+	GET8(S0SPDR);		/* this will clear the SPIF bit */
+}
+
+static inline void spi_set_clock(unsigned char clk_value)
+{
+	PUT8(S0SPCCR, clk_value);
+}
+
+static inline void spi_set_cfg(unsigned char phase,
+			       unsigned char polarity,
+			       unsigned char lsbf)
+{
+	unsigned char v = 0x20;	/* master bit set */
+
+	if (phase)
+		v |= 0x08;			/* set phase bit */
+	if (polarity) {
+		v |= 0x10;			/* set polarity bit */
+		spi_idle = 0xFF;
+	} else {
+		spi_idle = 0x00;
+	}
+	if (lsbf)
+		v |= 0x40;			/* set lsbf bit */
+
+	PUT8(S0SPCR, v);
+}
+#endif /* SPI_H */
diff --git a/include/asm-microblaze/asm.h b/include/asm-microblaze/asm.h
new file mode 100755
index 0000000..f10f89c
--- /dev/null
+++ b/include/asm-microblaze/asm.h
@@ -0,0 +1,98 @@
+/*
+ * (C) Copyright 2007 Michal Simek
+ *
+ * Michal  SIMEK <monstr@monstr.eu>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* FSL macros */
+#define NGET(val, fslnum) \
+	__asm__ __volatile__ ("nget %0, rfsl" #fslnum :"=r" (val));
+
+#define GET(val, fslnum) \
+	__asm__ __volatile__ ("get %0, rfsl" #fslnum :"=r" (val));
+
+#define NCGET(val, fslnum) \
+	__asm__ __volatile__ ("ncget %0, rfsl" #fslnum :"=r" (val));
+
+#define CGET(val, fslnum) \
+	__asm__ __volatile__ ("cget %0, rfsl" #fslnum :"=r" (val));
+
+#define NPUT(val, fslnum) \
+	__asm__ __volatile__ ("nput %0, rfsl" #fslnum ::"r" (val));
+
+#define PUT(val, fslnum) \
+	__asm__ __volatile__ ("put %0, rfsl" #fslnum ::"r" (val));
+
+#define NCPUT(val, fslnum) \
+	__asm__ __volatile__ ("ncput %0, rfsl" #fslnum ::"r" (val));
+
+#define CPUT(val, fslnum) \
+	__asm__ __volatile__ ("cput %0, rfsl" #fslnum ::"r" (val));
+
+/* CPU dependent */
+/* machine status register */
+#define MFS(val, reg) \
+	__asm__ __volatile__ ("mfs %0," #reg :"=r" (val));
+
+#define MTS(val, reg) \
+	__asm__ __volatile__ ("mts " #reg ", %0"::"r" (val));
+
+/* get return address from interrupt */
+#define R14(val) \
+	__asm__ __volatile__ ("addi %0, r14, 0":"=r" (val));
+
+#define NOP	__asm__ __volatile__ ("nop");
+
+/* use machine status registe USE_MSR_REG */
+#ifdef XILINX_USE_MSR_INSTR
+#define MSRSET(val) \
+	__asm__ __volatile__ ("msrset r0," #val );
+
+#define MSRCLR(val) \
+	__asm__ __volatile__ ("msrclr r0," #val );
+
+#else
+#define MSRSET(val)						\
+{								\
+	register unsigned tmp;					\
+	__asm__ __volatile__ ("					\
+			mfs 	%0, rmsr;			\
+			ori	%0, %0, "#val";			\
+			mts	rmsr, %0;			\
+			nop;"					\
+			: "=r" (tmp)				\
+			: "d" (val)				\
+			: "memory");				\
+}
+
+#define MSRCLR(val)						\
+{								\
+	register unsigned tmp;					\
+	__asm__ __volatile__ ("					\
+			mfs 	%0, rmsr;			\
+			andi	%0, %0, ~"#val";		\
+			mts	rmsr, %0;			\
+			nop;"					\
+			: "=r" (tmp)				\
+			: "d" (val)				\
+			: "memory");				\
+}
+#endif
diff --git a/include/asm-microblaze/microblaze_intc.h b/include/asm-microblaze/microblaze_intc.h
index 6635aea..4c385aa 100644
--- a/include/asm-microblaze/microblaze_intc.h
+++ b/include/asm-microblaze/microblaze_intc.h
@@ -38,3 +38,6 @@ struct irq_action {
 	void *arg;
 	int count; /* number of interrupt */
 };
+
+void install_interrupt_handler (int irq, interrupt_handler_t * hdlr,
+				       void *arg);
diff --git a/include/asm-ppc/e300.h b/include/asm-ppc/e300.h
index ff9512f..d1bb159 100644
--- a/include/asm-ppc/e300.h
+++ b/include/asm-ppc/e300.h
@@ -6,19 +6,9 @@
 #ifndef	__E300_H__
 #define __E300_H__
 
-/*
- * e300 Processor Version & Revision Numbers
- */
-#define PVR_83xx 0x80830000
-#define PVR_8349_REV10 (PVR_83xx | 0x0010)
-#define PVR_8349_REV11 (PVR_83xx | 0x0011)
-#define PVR_8360_REV10 (PVR_83xx | 0x0020)
-#define PVR_8360_REV11 (PVR_83xx | 0x0020)
-
-#if defined(CONFIG_MPC832X)
-#undef PVR_83xx
-#define PVR_83xx 0x80840000
-#endif
+#define PVR_E300C1	0x80830000
+#define PVR_E300C2	0x80840000
+#define PVR_E300C3	0x80850000
 
 /*
  * Hardware Implementation-Dependent Register 0 (HID0)
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index 26bc875..cd24636 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -55,11 +55,13 @@ typedef	struct	global_data {
 #if defined(CONFIG_MPC83XX)
 	/* There are other clocks in the MPC83XX */
 	u32 csb_clk;
-#if defined (CONFIG_MPC834X)
+#if defined (CONFIG_MPC834X) || defined(CONFIG_MPC831X)
 	u32 tsec1_clk;
 	u32 tsec2_clk;
-	u32 usbmph_clk;
 	u32 usbdr_clk;
+#endif
+#if defined (CONFIG_MPC834X)
+	u32 usbmph_clk;
 #endif /* CONFIG_MPC834X */
 	u32 core_clk;
 	u32 i2c1_clk;
diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h
index 5e088d6..0de9338 100644
--- a/include/asm-ppc/immap_83xx.h
+++ b/include/asm-ppc/immap_83xx.h
@@ -206,7 +206,9 @@ typedef struct pmc83xx {
 	u32 pmccr;		/* PMC Configuration Register */
 	u32 pmcer;		/* PMC Event Register */
 	u32 pmcmr;		/* PMC Mask Register */
-	u8 res0[0xF4];
+	u32 pmccr1;		/* PMC Configuration Register 1 */
+	u32 pmccr2;		/* PMC Configuration Register 2 */
+	u8 res0[0xEC];
 } pmc83xx_t;
 
 /*
@@ -355,7 +357,8 @@ typedef struct lbus83xx {
 	u8 res2[0x8];
 	u32 mrtpr;		/* Memory Refresh Timer Prescaler Register */
 	u32 mdr;		/* UPM Data Register */
-	u8 res3[0x8];
+	u8 res3[0x4];
+	u32 lsor;		/* Special Operation Initiation Register */
 	u32 lsdmr;		/* SDRAM Mode Register */
 	u8 res4[0x8];
 	u32 lurt;		/* UPM Refresh Timer */
@@ -369,8 +372,14 @@ typedef struct lbus83xx {
 	u8 res6[0xC];
 	u32 lbcr;		/* Configuration Register */
 	u32 lcrr;		/* Clock Ratio Register */
-	u8 res7[0x28];
-	u8 res8[0xF00];
+	u8 res7[0x8];
+	u32 fmr;		/* Flash Mode Register */
+	u32 fir;		/* Flash Instruction Register */
+	u32 fcr;		/* Flash Command Register */
+	u32 fbar;		/* Flash Block Addr Register */
+	u32 fpar;		/* Flash Page Addr Register */
+	u32 fbcr;		/* Flash Byte Count Register */
+	u8 res8[0xF08];
 } lbus83xx_t;
 
 /*
@@ -527,7 +536,7 @@ typedef struct pcictrl83xx {
  * USB
  */
 typedef struct usb83xx {
-	u8 fixme[0x2000];
+	u8 fixme[0x1000];
 } usb83xx_t;
 
 /*
@@ -574,7 +583,42 @@ typedef struct immap {
 	ios83xx_t		ios;		/* Sequencer */
 	pcictrl83xx_t		pci_ctrl[2];	/* PCI Controller Control and Status Registers */
 	u8			res5[0x19900];
-	usb83xx_t		usb;
+	usb83xx_t		usb[2];
+	tsec83xx_t		tsec[2];
+	u8			res6[0xA000];
+	security83xx_t		security;
+	u8			res7[0xC0000];
+} immap_t;
+
+#elif defined(CONFIG_MPC831X)
+typedef struct immap {
+	sysconf83xx_t		sysconf;	/* System configuration */
+	wdt83xx_t		wdt;		/* Watch Dog Timer (WDT) Registers */
+	rtclk83xx_t		rtc;		/* Real Time Clock Module Registers */
+	rtclk83xx_t		pit;		/* Periodic Interval Timer */
+	gtm83xx_t		gtm[2];		/* Global Timers Module */
+	ipic83xx_t		ipic;		/* Integrated Programmable Interrupt Controller */
+	arbiter83xx_t		arbiter;	/* System Arbiter Registers */
+	reset83xx_t		reset;		/* Reset Module */
+	clk83xx_t		clk;		/* System Clock Module */
+	pmc83xx_t		pmc;		/* Power Management Control Module */
+	gpio83xx_t		gpio[1];	/* General purpose I/O module */
+	u8			res0[0x1300];
+	ddr83xx_t		ddr;		/* DDR Memory Controller Memory */
+	fsl_i2c_t		i2c[2];		/* I2C Controllers */
+	u8			res1[0x1300];
+	duart83xx_t		duart[2];	/* DUART */
+	u8			res2[0x900];
+	lbus83xx_t		lbus;		/* Local Bus Controller Registers */
+	u8			res3[0x1000];
+	spi83xx_t		spi;		/* Serial Peripheral Interface */
+	dma83xx_t		dma;		/* DMA */
+	pciconf83xx_t		pci_conf[1];	/* PCI Software Configuration Registers */
+	u8			res4[0x80];
+	ios83xx_t		ios;		/* Sequencer */
+	pcictrl83xx_t		pci_ctrl[1];	/* PCI Controller Control and Status Registers */
+	u8			res5[0x1aa00];
+	usb83xx_t		usb[1];
 	tsec83xx_t		tsec[2];
 	u8			res6[0xA000];
 	security83xx_t		security;
diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h
index bbc9ba0..03289bc 100644
--- a/include/asm-ppc/io.h
+++ b/include/asm-ppc/io.h
@@ -105,6 +105,11 @@ static inline void sync(void)
 	__asm__ __volatile__ ("sync" : : : "memory");
 }
 
+static inline void isync(void)
+{
+	__asm__ __volatile__ ("isync" : : : "memory");
+}
+
 /* Enforce in-order execution of data I/O.
  * No distinction between read/write on PPC; use eieio for all three.
  */
@@ -114,74 +119,90 @@ static inline void sync(void)
 
 /*
  * 8, 16 and 32 bit, big and little endian I/O operations, with barrier.
+ *
+ * Read operations have additional twi & isync to make sure the read
+ * is actually performed (i.e. the data has come back) before we start
+ * executing any following instructions.
  */
-extern inline int in_8(volatile u8 *addr)
+#define __iomem
+extern inline int in_8(const volatile unsigned char __iomem *addr)
 {
-    int ret;
+	int ret;
 
-    __asm__ __volatile__("lbz%U1%X1 %0,%1; eieio" : "=r" (ret) : "m" (*addr));
-    return ret;
+	__asm__ __volatile__(
+		"sync; lbz%U1%X1 %0,%1;\n"
+		"twi 0,%0,0;\n"
+		"isync" : "=r" (ret) : "m" (*addr));
+	return ret;
 }
 
-extern inline void out_8(volatile u8 *addr, int val)
+extern inline void out_8(volatile unsigned char __iomem *addr, int val)
 {
-    __asm__ __volatile__("stb%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
+	__asm__ __volatile__("stb%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
 }
 
-extern inline int in_le16(volatile u16 *addr)
+extern inline int in_le16(const volatile unsigned short __iomem *addr)
 {
-    int ret;
+	int ret;
 
-    __asm__ __volatile__("lhbrx %0,0,%1; eieio" : "=r" (ret) :
-		  "r" (addr), "m" (*addr));
-    return ret;
+	__asm__ __volatile__("sync; lhbrx %0,0,%1;\n"
+			     "twi 0,%0,0;\n"
+			     "isync" : "=r" (ret) :
+			      "r" (addr), "m" (*addr));
+	return ret;
 }
 
-extern inline int in_be16(volatile u16 *addr)
+extern inline int in_be16(const volatile unsigned short __iomem *addr)
 {
-    int ret;
+	int ret;
 
-    __asm__ __volatile__("lhz%U1%X1 %0,%1; eieio" : "=r" (ret) : "m" (*addr));
-    return ret;
+	__asm__ __volatile__("sync; lhz%U1%X1 %0,%1;\n"
+			     "twi 0,%0,0;\n"
+			     "isync" : "=r" (ret) : "m" (*addr));
+	return ret;
 }
 
-extern inline void out_le16(volatile u16 *addr, int val)
+extern inline void out_le16(volatile unsigned short __iomem *addr, int val)
 {
-    __asm__ __volatile__("sthbrx %1,0,%2; eieio" : "=m" (*addr) :
-		  "r" (val), "r" (addr));
+	__asm__ __volatile__("sync; sthbrx %1,0,%2" : "=m" (*addr) :
+			      "r" (val), "r" (addr));
 }
 
-extern inline void out_be16(volatile u16 *addr, int val)
+extern inline void out_be16(volatile unsigned short __iomem *addr, int val)
 {
-    __asm__ __volatile__("sth%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
+	__asm__ __volatile__("sync; sth%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
 }
 
-extern inline unsigned in_le32(volatile u32 *addr)
+extern inline unsigned in_le32(const volatile unsigned __iomem *addr)
 {
-    unsigned ret;
+	unsigned ret;
 
-    __asm__ __volatile__("lwbrx %0,0,%1; eieio" : "=r" (ret) :
-		 "r" (addr), "m" (*addr));
-    return ret;
+	__asm__ __volatile__("sync; lwbrx %0,0,%1;\n"
+			     "twi 0,%0,0;\n"
+			     "isync" : "=r" (ret) :
+			     "r" (addr), "m" (*addr));
+	return ret;
 }
 
-extern inline unsigned in_be32(volatile u32 *addr)
+extern inline unsigned in_be32(const volatile unsigned __iomem *addr)
 {
-    unsigned ret;
+	unsigned ret;
 
-    __asm__ __volatile__("lwz%U1%X1 %0,%1; eieio" : "=r" (ret) : "m" (*addr));
-    return ret;
+	__asm__ __volatile__("sync; lwz%U1%X1 %0,%1;\n"
+			     "twi 0,%0,0;\n"
+			     "isync" : "=r" (ret) : "m" (*addr));
+	return ret;
 }
 
-extern inline void out_le32(volatile unsigned *addr, int val)
+extern inline void out_le32(volatile unsigned __iomem *addr, int val)
 {
-    __asm__ __volatile__("stwbrx %1,0,%2; eieio" : "=m" (*addr) :
-		 "r" (val), "r" (addr));
+	__asm__ __volatile__("sync; stwbrx %1,0,%2" : "=m" (*addr) :
+			     "r" (val), "r" (addr));
 }
 
-extern inline void out_be32(volatile unsigned *addr, int val)
+extern inline void out_be32(volatile unsigned __iomem *addr, int val)
 {
-    __asm__ __volatile__("stw%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
+	__asm__ __volatile__("sync; stw%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
 }
 
 #endif
diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h
index b226825..48fd982 100644
--- a/include/asm-ppc/mmu.h
+++ b/include/asm-ppc/mmu.h
@@ -396,8 +396,8 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower);
 #define BOOKE_PAGESZ_16M        7
 #define BOOKE_PAGESZ_64M        8
 #define BOOKE_PAGESZ_256M       9
-#define BOOKE_PAGESZ_1GB        10
-#define BOOKE_PAGESZ_4GB        11
+#define BOOKE_PAGESZ_1G		10
+#define BOOKE_PAGESZ_4G		11
 
 #if defined(CONFIG_MPC86xx)
 #define LAWBAR_BASE_ADDR	0x00FFFFFF
@@ -413,6 +413,7 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower);
 #define LAWAR_TRGT_IF_PCI1	0x00000000
 #define LAWAR_TRGT_IF_PCIX	0x00000000
 #define LAWAR_TRGT_IF_PCI2	0x00100000
+#define LAWAR_TRGT_IF_PEX	0x00200000
 #define LAWAR_TRGT_IF_LBC	0x00400000
 #define LAWAR_TRGT_IF_CCSR	0x00800000
 #define LAWAR_TRGT_IF_DDR_INTERLEAVED 0x00B00000
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 0585962..5efc3ee 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -232,6 +232,9 @@
 #define   HID0_BHTE	(1<<2)		/* Branch History Table Enable */
 #define   HID0_BTCD	(1<<1)		/* Branch target cache disable */
 #define SPRN_HID1	0x3F1	/* Hardware Implementation Register 1 */
+#define	  HID1_RFXE	(1<<17)		/* Read Fault Exception Enable */
+#define	  HID1_ASTME	(1<<13)		/* Address bus streaming mode */
+#define	  HID1_ABE	(1<<12)		/* Address broadcast enable */
 #define SPRN_IABR	0x3F2	/* Instruction Address Breakpoint Register */
 #ifndef CONFIG_BOOKE
 #define SPRN_IAC1	0x3F4	/* Instruction Address Compare 1 */
@@ -415,10 +418,12 @@
 #define SPRN_IVOR15	0x19f	/* Interrupt Vector Offset Register 15 */
 
 /* e500 definitions */
-#define SPRN_L1CSR0     0x3f2   /* L1 Cache Control and Status Register 0 */
+#define SPRN_L1CSR0     0x3f2   /* L1 Data Cache Control and Status Register 0 */
+#define   L1CSR0_CPE            0x00010000	/* Data Cache Parity Enable */
 #define   L1CSR0_DCFI           0x00000002      /* Data Cache Flash Invalidate */
 #define   L1CSR0_DCE            0x00000001      /* Data Cache Enable */
-#define SPRN_L1CSR1     0x3f3   /* L1 Cache Control and Status Register 1 */
+#define SPRN_L1CSR1     0x3f3   /* L1 Instruction Cache Control and Status Register 1 */
+#define   L1CSR1_CPE            0x00010000	/* Instruction Cache Parity Enable */
 #define   L1CSR1_ICFI           0x00000002      /* Instruction Cache Flash Invalidate */
 #define   L1CSR1_ICE            0x00000001      /* Instruction Cache Enable */
 
@@ -701,8 +706,6 @@
 #define SVR_MJREV(svr)	(((svr) >>  4) & 0x0F)   /* Major SOC design revision indicator */
 #define SVR_MNREV(svr)	(((svr) >>  0) & 0x0F)   /* Minor SOC design revision indicator */
 
-/* System-On-Chip Version Numbers (version field only) */
-#define SVR_MPC5200	0x8011
 
 /* Processor Version Register */
 
@@ -813,6 +816,12 @@
 #define PVR_8260_HIP7R1 0x80822013
 #define PVR_8260_HIP7RA	0x80822014
 
+/*
+ * MPC 52xx
+ */
+#define PVR_5200	0x80822011
+#define PVR_5200B	0x80822014
+
 
 /*
  * System Version Register
@@ -840,9 +849,12 @@
 #define SVR_8560	0x8070
 #define SVR_8555	0x8079
 #define SVR_8541	0x807A
+#define SVR_8544	0x8034
+#define SVR_8544_E	0x803C
 #define SVR_8548	0x8031
 #define SVR_8548_E	0x8039
 #define SVR_8641	0x8090
+#define SVR_8568_E	0x807D
 
 
 /* I am just adding a single entry for 8260 boards.  I think we may be
diff --git a/include/cmd_confdefs.h b/include/cmd_confdefs.h
index cf36583..b3ccdce 100644
--- a/include/cmd_confdefs.h
+++ b/include/cmd_confdefs.h
@@ -94,6 +94,7 @@
 #define CFG_CMD_EXT2	0x1000000000000000ULL	/* EXT2 Support			*/
 #define CFG_CMD_SNTP	0x2000000000000000ULL	/* SNTP support			*/
 #define CFG_CMD_DISPLAY	0x4000000000000000ULL	/* Display support		*/
+#define CFG_CMD_MFSL	0x8000000000000000ULL	/* FSL support for Microblaze	*/
 
 #define CFG_CMD_ALL	0xFFFFFFFFFFFFFFFFULL	/* ALL commands			*/
 
@@ -125,6 +126,7 @@
 			CFG_CMD_IRQ	| \
 			CFG_CMD_JFFS2	| \
 			CFG_CMD_KGDB	| \
+			CFG_CMD_MFSL	| \
 			CFG_CMD_MII	| \
 			CFG_CMD_MMC	| \
 			CFG_CMD_NAND	| \
diff --git a/include/common.h b/include/common.h
index b162dbd..3c4b37b 100644
--- a/include/common.h
+++ b/include/common.h
@@ -402,6 +402,10 @@ void		ppcDcbi(unsigned long value);
 void		ppcSync(void);
 void		ppcDcbz(unsigned long value);
 #endif
+#if defined (CONFIG_MICROBLAZE)
+unsigned short	in16(unsigned int);
+void		out16(unsigned int, unsigned short value);
+#endif
 
 #if defined (CONFIG_MPC83XX)
 void		ppcDWload(unsigned int *addr, unsigned int *ret);
@@ -440,8 +444,6 @@ int	sdram_adjust_866 (void);
 int	adjust_sdram_tbs_8xx (void);
 #if defined(CONFIG_8260)
 int	prt_8260_clks (void);
-#elif defined(CONFIG_MPC83XX)
-int print_clock_conf(void);
 #elif defined(CONFIG_MPC5xxx)
 int	prt_mpc5xxx_clks (void);
 #endif
diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h
index 5b54f30..bc30977 100644
--- a/include/configs/BC3450.h
+++ b/include/configs/BC3450.h
@@ -282,17 +282,17 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133		/* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
 /*
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet
- * hasn't been tested with a IPB Bus Clock of 66 MHz.
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ *  of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
-#if defined(CFG_IPBSPEED_133)
-# define CFG_PCISPEED_66			/* define for 66MHz speed */
+#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
+# define CFG_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
 #endif
 
 /*
@@ -488,7 +488,7 @@
 
 #define CFG_BOOTCS_START	CFG_FLASH_BASE
 #define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#ifdef CFG_PCISPEED_66
+#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
 # define CFG_BOOTCS_CFG		0x0008DF30	/* for pci_clk	= 66 MHz */
 #else
 # define CFG_BOOTCS_CFG		0x0004DF30	/* for pci_clk = 33 MHz	 */
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index 0d38254..73be069 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -167,9 +167,9 @@
  * IPB Bus clocking configuration.
  */
 #if defined(CONFIG_LITE5200B)
-#define CFG_IPBSPEED_133 	/* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK 	/* define for 133MHz speed */
 #else
-#undef CFG_IPBSPEED_133   	/* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK   	/* define for 133MHz speed */
 #endif
 #endif /* CONFIG_MPC5200 */
 
@@ -182,7 +182,7 @@
 
 #define OF_CPU			"PowerPC,5200@0"
 #define OF_SOC			"soc5200@f0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 8)
+#define OF_TBCLK		(bd->bi_busfreq / 4)
 #define OF_STDOUT_PATH		"/soc5200@f0000000/serial@2000"
 
 /*
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
new file mode 100644
index 0000000..6976313
--- /dev/null
+++ b/include/configs/MPC8313ERDB.h
@@ -0,0 +1,561 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * mpc8313epb board configuration file
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300		1
+#define CONFIG_MPC83XX		1
+#define CONFIG_MPC831X		1
+#define CONFIG_MPC8313		1
+#define CONFIG_MPC8313ERDB	1
+
+#define CONFIG_PCI
+#define CONFIG_83XX_GENERIC_PCI
+
+#ifdef CFG_66MHZ
+#define CONFIG_83XX_CLKIN	66666667	/* in Hz */
+#elif defined(CFG_33MHZ)
+#define CONFIG_83XX_CLKIN	33333333	/* in Hz */
+#else
+#error Unknown oscillator frequency.
+#endif
+
+#define CONFIG_SYS_CLK_FREQ	CONFIG_83XX_CLKIN
+
+#define CONFIG_BOARD_EARLY_INIT_F		/* call board_pre_init */
+
+#define CFG_IMMR		0xE0000000
+
+#define CFG_MEMTEST_START	0x00001000
+#define CFG_MEMTEST_END		0x07f00000
+
+/* Early revs of this board will lock up hard when attempting
+ * to access the PMC registers, unless a JTAG debugger is
+ * connected, or some resistor modifications are made.
+ */
+#define CFG_8313ERDB_BROKEN_PMC 1
+
+#define CFG_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
+#define CFG_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_BASE		0x00000000	/* DDR is system memory*/
+#define CFG_SDRAM_BASE		CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
+
+/*
+ * Manually set up DDR parameters, as this board does not
+ * seem to have the SPD connected to I2C.
+ */
+#define CFG_DDR_SIZE		128		/* MB */
+#define CFG_DDR_CONFIG		( CSCONFIG_EN | CSCONFIG_AP \
+				| 0x00040000 /* TODO */ \
+				| CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10 )
+				/* 0x80840102 */
+
+#define CFG_DDR_TIMING_3	0x00000000
+#define CFG_DDR_TIMING_0	( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
+				| ( 0 << TIMING_CFG0_WRT_SHIFT ) \
+				| ( 0 << TIMING_CFG0_RRT_SHIFT ) \
+				| ( 0 << TIMING_CFG0_WWT_SHIFT ) \
+				| ( 2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \
+				| ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \
+				| ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \
+				| ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) )
+				/* 0x00220802 */
+#define CFG_DDR_TIMING_1	( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \
+				| ( 9 << TIMING_CFG1_ACTTOPRE_SHIFT ) \
+				| ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \
+				| ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \
+				| (13 << TIMING_CFG1_REFREC_SHIFT ) \
+				| ( 3 << TIMING_CFG1_WRREC_SHIFT ) \
+				| ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \
+				| ( 2 << TIMING_CFG1_WRTORD_SHIFT ) )
+				/* 0x3935d322 */
+#define CFG_DDR_TIMING_2	( ( 0 << TIMING_CFG2_ADD_LAT_SHIFT ) \
+				| (31 << TIMING_CFG2_CPO_SHIFT ) \
+				| ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \
+				| ( 2 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \
+				| ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \
+				| ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \
+				| (10 << TIMING_CFG2_FOUR_ACT_SHIFT) )
+				/* 0x0f9048ca */ /* P9-45,may need tuning */
+#define CFG_DDR_INTERVAL	( ( 800 << SDRAM_INTERVAL_REFINT_SHIFT ) \
+				| ( 100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) )
+				/* 0x03200064 */
+#if defined(CONFIG_DDR_2T_TIMING)
+#define CFG_SDRAM_CFG		( SDRAM_CFG_SREN \
+				| 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \
+				| SDRAM_CFG_2T_EN \
+				| SDRAM_CFG_DBW_32 )
+#else
+#define CFG_SDRAM_CFG		( SDRAM_CFG_SREN \
+				| 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \
+				| SDRAM_CFG_32_BE )
+				/* 0x43080000 */
+#endif
+#define CFG_SDRAM_CFG2		0x00401000;
+/* set burst length to 8 for 32-bit data path */
+#define CFG_DDR_MODE		( ( 0x4440 << SDRAM_MODE_ESD_SHIFT ) \
+				| ( 0x0232 << SDRAM_MODE_SD_SHIFT ) )
+				/* 0x44400232 */
+#define CFG_DDR_MODE_2		0x8000C000;
+
+#define CFG_DDR_CLK_CNTL	DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
+				/*0x02000000*/
+#define CFG_DDRCDR_VALUE	( DDRCDR_EN \
+				| DDRCDR_PZ_NOMZ \
+				| DDRCDR_NZ_NOMZ \
+				| DDRCDR_M_ODR )
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CFG_FLASH_CFI				/* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER			/* use the CFI driver */
+#define CFG_FLASH_BASE		0xFE000000	/* start of FLASH   */
+#define CFG_FLASH_SIZE		8		/* flash size in MB */
+#define CFG_FLASH_EMPTY_INFO			/* display empty sectors */
+#define CFG_FLASH_USE_BUFFER_WRITE		/* buffer up multiple bytes */
+
+#define CFG_BR0_PRELIM		(CFG_FLASH_BASE |	/* flash Base address */ \
+				(2 << BR_PS_SHIFT) |	/* 16 bit port size */ \
+				BR_V)			/* valid */
+#define CFG_OR0_PRELIM		( 0xFF000000		/* 16 MByte */ \
+				| OR_GPCM_XACS \
+				| OR_GPCM_SCY_9 \
+				| OR_GPCM_EHTR \
+				| OR_GPCM_EAD )
+				/* 0xFF006FF7	TODO SLOW 16 MB flash size */
+#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE	/* window base at flash base */
+#define CFG_LBLAWAR0_PRELIM	0x80000017	/* 16 MB window size */
+
+#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
+#define CFG_MAX_FLASH_SECT	135		/* sectors per device */
+
+#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+
+#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#endif
+
+#define CFG_INIT_RAM_LOCK	1
+#define CFG_INIT_RAM_ADDR	0xFD000000	/* Initial RAM address */
+#define CFG_INIT_RAM_END	0x1000		/* End of used area in RAM*/
+
+#define CFG_GBL_DATA_SIZE	0x100		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN		(512 * 1024)	/* Reserved for malloc */
+
+/*
+ * Local Bus LCRR and LBCR regs
+ */
+#define CFG_LCRR	LCRR_EADC_1 | LCRR_CLKDIV_2	/* 0x00010002 */
+#define CFG_LBC_LBCR	( 0x00040000 /* TODO */ \
+			| (0xFF << LBCR_BMT_SHIFT) \
+			| 0xF )	/* 0x0004ff0f */
+
+#define CFG_LBC_MRTPR	0x20000000  /*TODO */ 	/* LB refresh timer prescal, 266MHz/32 */
+
+/* drivers/nand/nand.c */
+#define CFG_NAND_BASE		0xE2800000	/* 0xF0000000 */
+#define CFG_MAX_NAND_DEVICE	1
+#define NAND_MAX_CHIPS		1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+
+#define CFG_BR1_PRELIM		( CFG_NAND_BASE \
+				| (2<<BR_DECC_SHIFT)	/* Use HW ECC */ \
+				| BR_PS_8		/* Port Size = 8 bit */ \
+				| BR_MS_FCM		/* MSEL = FCM */ \
+				| BR_V )		/* valid */
+#define CFG_OR1_PRELIM		( 0xFFFF8000		/* length 32K */ \
+				| OR_FCM_CSCT \
+				| OR_FCM_CST \
+				| OR_FCM_CHT \
+				| OR_FCM_SCY_1 \
+				| OR_FCM_TRLX \
+				| OR_FCM_EHTR )
+				/* 0xFFFF8396 */
+#define CFG_LBLAWBAR1_PRELIM	CFG_NAND_BASE
+#define CFG_LBLAWAR1_PRELIM	0x8000000E	/* 32KB  */
+
+#define CFG_VSC7385_BASE	0xF0000000
+
+#define CONFIG_VSC7385_ENET			/* VSC7385 ethernet support */
+#define CFG_BR2_PRELIM		0xf0000801	/* VSC7385 Base address */
+#define CFG_OR2_PRELIM		0xfffe09ff	/* VSC7385, 128K bytes*/
+#define CFG_LBLAWBAR2_PRELIM	CFG_VSC7385_BASE/* Access window base at VSC7385 base */
+#define CFG_LBLAWAR2_PRELIM	0x80000010	/* Access window size 128K */
+
+/* local bus read write buffer mapping */
+#define CFG_BR3_PRELIM		0xFA000801	/* map at 0xFA000000 */
+#define CFG_OR3_PRELIM		0xFFFF8FF7	/* 32kB */
+#define CFG_LBLAWBAR3_PRELIM	0xFA000000
+#define CFG_LBLAWAR3_PRELIM	0x8000000E	/* 32KB  */
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU			"PowerPC,8313@0"
+#define OF_SOC			"soc8313@e0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH		"/soc8313@e0000000/serial@4500"
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX	1
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE	\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
+
+#define CFG_NS16550_COM1	(CFG_IMMR+0x4500)
+#define CFG_NS16550_COM2	(CFG_IMMR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+
+/* I2C */
+#define CONFIG_HARD_I2C			/* I2C with hardware support*/
+#define CONFIG_FSL_I2C
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3000
+#define CFG_I2C2_OFFSET		0x3100
+
+/* TSEC */
+#define CFG_TSEC1_OFFSET	0x24000
+#define CFG_TSEC1		(CFG_IMMR+CFG_TSEC1_OFFSET)
+#define CFG_TSEC2_OFFSET	0x25000
+#define CFG_TSEC2		(CFG_IMMR+CFG_TSEC2_OFFSET)
+#define CONFIG_NET_MULTI
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE	0x80000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCI1_MMIO_BASE	0x90000000
+#define CFG_PCI1_MMIO_PHYS	CFG_PCI1_MMIO_BASE
+#define CFG_PCI1_MMIO_SIZE	0x10000000	/* 256M */
+#define CFG_PCI1_IO_BASE	0x00000000
+#define CFG_PCI1_IO_PHYS	0xE2000000
+#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */
+
+#define CONFIG_PCI_PNP		/* do pci plug-and-play */
+#define CFG_PCI_SUBSYS_VENDORID 0x1057	/* Motorola */
+
+/*
+ * TSEC configuration
+ */
+#define CONFIG_TSEC_ENET		/* TSEC ethernet support */
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI		1
+#endif
+
+#define CONFIG_GMII			1	/* MII PHY management */
+#define CONFIG_MPC83XX_TSEC1		1
+
+#define CONFIG_MPC83XX_TSEC1_NAME	"TSEC0"
+#define CONFIG_MPC83XX_TSEC2		1
+#define CONFIG_MPC83XX_TSEC2_NAME	"TSEC1"
+#define TSEC1_PHY_ADDR			0x1c
+#define TSEC2_PHY_ADDR			4
+#define TSEC1_PHYIDX			0
+#define TSEC2_PHYIDX			0
+
+/* Options are: TSEC[0-1] */
+#define CONFIG_ETHPRIME			"TSEC1"
+
+/*
+ * Configure on-board RTC
+ */
+#define CONFIG_RTC_DS1337
+#define CFG_I2C_RTC_ADDR		0x68
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+	#define CFG_ENV_IS_IN_FLASH	1
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+	#define CFG_ENV_SECT_SIZE	0x10000	/* 64K(one sector) for env */
+	#define CFG_ENV_SIZE		0x2000
+
+/* Address and size of Redundant Environment Sector */
+#else
+	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+	#define CFG_ENV_SIZE		0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+#define CFG_BASE_COMMANDS	( CONFIG_CMD_DFL	\
+				| CFG_CMD_PING		\
+				| CFG_CMD_DHCP		\
+				| CFG_CMD_I2C		\
+				| CFG_CMD_MII		\
+				| CFG_CMD_DATE		\
+				| CFG_CMD_PCI)
+
+#define CONFIG_CMDLINE_EDITING 1
+
+#define CFG_RAMBOOT_COMMANDS	(CFG_BASE_COMMANDS & \
+				 ~(CFG_CMD_ENV | CFG_CMD_LOADS))
+
+#if defined(CFG_RAMBOOT)
+#define CONFIG_COMMANDS CFG_RAMBOOT_COMMANDS
+#else
+#define CONFIG_COMMANDS CFG_BASE_COMMANDS
+#endif
+
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory */
+#define CFG_LOAD_ADDR	0x2000000	/* default load address */
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE		16384
+#define CFG_CACHELINE_SIZE	32
+#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
+
+#define CFG_RCWH_PCIHOST 0x80000000	/* PCIHOST  */
+
+#ifdef CFG_66MHZ
+
+/* 66MHz IN, 133MHz CSB, 266 DDR, 266 CORE */
+/* 0x62040000 */
+#define CFG_HRCW_LOW (\
+	0x20000000 /* reserved, must be set */ |\
+	HRCWL_DDRCM |\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_2X1 |\
+	HRCWL_CSB_TO_CLKIN_2X1 |\
+	HRCWL_CORE_TO_CSB_2X1)
+
+#elif defined(CFG_33MHZ)
+
+/* 33MHz IN, 165MHz CSB, 330 DDR, 330 CORE */
+/* 0x65040000 */
+#define CFG_HRCW_LOW (\
+	0x20000000 /* reserved, must be set */ |\
+	HRCWL_DDRCM |\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_2X1 |\
+	HRCWL_CSB_TO_CLKIN_5X1 |\
+	HRCWL_CORE_TO_CSB_2X1)
+
+#endif
+
+/* 0xa0606c00 */
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_HOST |\
+	HRCWH_PCI1_ARBITER_ENABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0X00000100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_RL_EXT_LEGACY |\
+	HRCWH_TSEC1M_IN_RGMII |\
+	HRCWH_TSEC2M_IN_RGMII |\
+	HRCWH_BIG_ENDIAN |\
+	HRCWH_LALE_NORMAL)
+
+/* System IO Config */
+#define CFG_SICRH	(SICRH_TSOBI1 | SICRH_TSOBI2)	/* RGMII */
+#define CFG_SICRL	SICRL_USBDR			/* Enable Internal USB Phy  */
+
+#define CFG_HID0_INIT	0x000000000
+#define CFG_HID0_FINAL	(HID0_ENABLE_MACHINE_CHECK | \
+			 HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
+
+#define CFG_HID2 HID2_HBE
+
+/* DDR @ 0x00000000 */
+#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10)
+#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* PCI @ 0x80000000 */
+#define CFG_IBAT1L	(CFG_PCI1_MEM_BASE | BATL_PP_10)
+#define CFG_IBAT1U	(CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT2L	(CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT2U	(CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* PCI2 not supported on 8313 */
+#define CFG_IBAT3L	(0)
+#define CFG_IBAT3U	(0)
+#define CFG_IBAT4L	(0)
+#define CFG_IBAT4U	(0)
+
+/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
+#define CFG_IBAT5L	(CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT5U	(CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
+#define CFG_IBAT6L	(0xF0000000 | BATL_PP_10)
+#define CFG_IBAT6U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT7L	(0)
+#define CFG_IBAT7U	(0)
+
+#define CFG_DBAT0L	CFG_IBAT0L
+#define CFG_DBAT0U	CFG_IBAT0U
+#define CFG_DBAT1L	CFG_IBAT1L
+#define CFG_DBAT1U	CFG_IBAT1U
+#define CFG_DBAT2L	CFG_IBAT2L
+#define CFG_DBAT2U	CFG_IBAT2U
+#define CFG_DBAT3L	CFG_IBAT3L
+#define CFG_DBAT3U	CFG_IBAT3U
+#define CFG_DBAT4L	CFG_IBAT4L
+#define CFG_DBAT4U	CFG_IBAT4U
+#define CFG_DBAT5L	CFG_IBAT5L
+#define CFG_DBAT5U	CFG_IBAT5U
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+#define CFG_DBAT7L	CFG_IBAT7L
+#define CFG_DBAT7U	CFG_IBAT7U
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02	/* Software reboot */
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_ETHADDR		00:E0:0C:00:95:01
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR		00:E0:0C:00:95:02
+
+#define CONFIG_IPADDR		10.0.0.2
+#define CONFIG_SERVERIP		10.0.0.1
+#define CONFIG_GATEWAYIP	10.0.0.1
+#define CONFIG_NETMASK		255.0.0.0
+#define CONFIG_NETDEV		eth1
+
+#define CONFIG_HOSTNAME		mpc8313erdb
+#define CONFIG_ROOTPATH		/nfs/root/path
+#define CONFIG_BOOTFILE		uImage
+#define CONFIG_UBOOTPATH	u-boot.bin	/* U-Boot image on TFTP server */
+#define CONFIG_FDTFILE		mpc8313erdb.dtb
+
+#define CONFIG_LOADADDR		200000	/* default location for tftp and bootm */
+#define CONFIG_BOOTDELAY	-1	/* -1 disables auto-boot */
+#define CONFIG_BAUDRATE		115200
+
+#define XMK_STR(x)	#x
+#define MK_STR(x)	XMK_STR(x)
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"netdev=" MK_STR(CONFIG_NETDEV) "\0" 				\
+	"ethprime=TSEC1\0"						\
+	"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" 				\
+	"tftpflash=tftpboot $loadaddr $uboot; " 			\
+		"protect off " MK_STR(TEXT_BASE) " +$filesize; " 	\
+		"erase " MK_STR(TEXT_BASE) " +$filesize; " 		\
+		"cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " 	\
+		"protect on " MK_STR(TEXT_BASE) " +$filesize; " 	\
+		"cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" 	\
+	"fdtaddr=400000\0"						\
+	"fdtfile=" MK_STR(CONFIG_FDTFILE) "\0"				\
+	"console=ttyS0\0"						\
+	"setbootargs=setenv bootargs "					\
+		"root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
+	"setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \
+		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+		"root=$rootdev rw console=$console,$baudrate $othbootargs\0"
+
+#define CONFIG_NFSBOOTCOMMAND						\
+	"setenv rootdev /dev/nfs;"					\
+	"run setbootargs;"							\
+	"run setipargs;"							\
+	"tftp $loadaddr $bootfile;"					\
+	"tftp $fdtaddr $fdtfile;"					\
+	"bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND						\
+	"setenv rootdev /dev/ram;"					\
+	"run setbootargs;"						\
+	"tftp $ramdiskaddr $ramdiskfile;"				\
+	"tftp $loadaddr $bootfile;"					\
+	"tftp $fdtaddr $fdtfile;"					\
+	"bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#undef MK_STR
+#undef XMK_STR
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 37bbfb3..906339e 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -154,6 +154,9 @@
 #define CFG_MEMTEST_START	0x1000		/* memtest region */
 #define CFG_MEMTEST_END		0x2000
 
+#define CFG_DDR_SDRAM_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_SS_EN | \
+				DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
+
 #ifdef CONFIG_HARD_I2C
 #define CONFIG_SPD_EEPROM		/* use SPD EEPROM for DDR setup*/
 #endif
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 74a84f4..5aeea58 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -330,13 +330,12 @@
 
 /*
  * General PCI
- * Addresses are mapped 1-1.
+ * Memory space is mapped 1-1, but I/O space must start from 0.
  */
 #define CFG_PCI1_MEM_BASE	0x80000000
 #define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
 #define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
-
-#define CFG_PCI1_IO_BASE	0x0
+#define CFG_PCI1_IO_BASE	0x00000000
 #define CFG_PCI1_IO_PHYS	0xe2000000
 #define CFG_PCI1_IO_SIZE	0x100000	/* 1M */
 
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index db389cf..fb360d2 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -334,7 +334,7 @@ extern unsigned long get_clock_freq(void);
 
 /*
  * General PCI
- * Addresses are mapped 1-1.
+ * Memory space is mapped 1-1, but I/O space must start from 0.
  */
 #define CFG_PCI1_MEM_BASE	0x80000000
 #define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
new file mode 100644
index 0000000..4c34308
--- /dev/null
+++ b/include/configs/MPC8544DS.h
@@ -0,0 +1,591 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * mpc8544ds board configuration file
+ *
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE		1	/* BOOKE */
+#define CONFIG_E500		1	/* BOOKE e500 family */
+#define CONFIG_MPC85xx		1	/* MPC8540/60/55/41/48 */
+#define CONFIG_MPC8544		1
+#define CONFIG_MPC8544DS	1
+
+#undef CONFIG_PCI			/* Enable PCI/PCIE */
+#undef CONFIG_PCI1			/* PCI controller 1 */
+#undef CONFIG_PCIE1			/* PCIE controler 1 (slot 1) */
+#undef CONFIG_PCIE2			/* PCIE controler 2 (slot 2) */
+#undef CONFIG_PCIE3			/* PCIE controler 3 (ULI bridge) */
+#undef CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
+
+#define CONFIG_TSEC_ENET 		/* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup */
+#undef CONFIG_DDR_DLL
+#define CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
+
+#define CONFIG_DDR_ECC			/* only for ECC DDR module */
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
+#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
+
+#define CONFIG_DDR_ECC_CMD
+
+/*
+ * When initializing flash, if we cannot find the manufacturer ID,
+ * assume this is the AMD flash associated with the CDS board.
+ * This allows booting from a promjet.
+ */
+#define CONFIG_ASSUME_AMD_FLASH
+
+#define MPC85xx_DDR_SDRAM_CLK_CNTL	/* 85xx has clock control reg */
+
+#ifndef __ASSEMBLY__
+extern unsigned long get_board_sys_clk(unsigned long dummy);
+#endif
+#define CONFIG_SYS_CLK_FREQ	get_board_sys_clk(0) /* sysclk for MPC85xx */
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE			/* toggle L2 cache 	*/
+#define CONFIG_BTB			/* toggle branch predition */
+#define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
+#define CONFIG_CLEAR_LAW0		/* Clear LAW0 in cpu_init_r */
+
+/*
+ * Only possible on E500 Version 2 or newer cores.
+ */
+#define CONFIG_ENABLE_36BIT_PHYS	1
+
+#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
+
+#undef	CFG_DRAM_TEST			/* memory test, takes time */
+#define CFG_MEMTEST_START	0x00200000	/* memtest works on */
+#define CFG_MEMTEST_END		0x00400000
+#define CFG_ALT_MEMTEST
+#define CONFIG_PANIC_HANG 	/* do not reset board on panic */
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_CCSRBAR_DEFAULT 	0xff700000	/* CCSRBAR Default */
+#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
+#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+
+#define CFG_PCI1_ADDR		(CFG_CCSRBAR+0x8000)
+#define CFG_PCIE1_ADDR		(CFG_CCSRBAR+0xa000)
+#define CFG_PCIE2_ADDR		(CFG_CCSRBAR+0x9000)
+#define CFG_PCIE3_ADDR		(CFG_CCSRBAR+0xb000)
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
+#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+
+#define SPD_EEPROM_ADDRESS	0x51		/* DDR DIMM */
+
+/*
+ * Make sure required options are set
+ */
+#ifndef CONFIG_SPD_EEPROM
+#error ("CONFIG_SPD_EEPROM is required")
+#endif
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+/*
+ * Memory map
+ *
+ * 0x0000_0000	0x7fff_ffff	DDR			2G Cacheable
+ *
+ * 0x8000_0000	0xbfff_ffff	PCI Express Mem		1G non-cacheable
+ *
+ * 0xc000_0000	0xdfff_ffff	PCI			512M non-cacheable
+ *
+ * 0xe000_0000	0xe00f_ffff	CCSR			1M non-cacheable
+ * 0xe100_0000	0xe3ff_ffff	PCI IO range		4M non-cacheable
+ *
+ * Localbus cacheable
+ *
+ * 0xf000_0000	0xf3ff_ffff	SDRAM			64M Cacheable
+ * 0xf401_0000	0xf401_3fff	L1 for stack		4K Cacheable TLB0
+ *
+ * Localbus non-cacheable
+ *
+ * 0xf800_0000	0xf80f_ffff	NVRAM/CADMUS (*)	1M non-cacheable
+ * 0xff00_0000	0xff7f_ffff	FLASH (2nd bank)	8M non-cacheable
+ * 0xff80_0000	0xffff_ffff	FLASH (boot bank)	8M non-cacheable
+ *
+ */
+
+/*
+ * Local Bus Definitions
+ */
+#define CFG_BOOT_BLOCK		0xfc000000	/* boot TLB */
+
+#define CFG_LBC_CACHE_BASE	0xf0000000	/* Localbus cacheable */
+
+#define CFG_FLASH_BASE		0xff800000	/* start of FLASH 8M */
+
+#define CFG_BR0_PRELIM		0xff801001
+#define CFG_BR1_PRELIM		0xfe801001
+
+#define CFG_OR0_PRELIM		0xff806e65
+#define CFG_OR1_PRELIM		0xff806e65
+
+#define CFG_FLASH_BANKS_LIST	{0xfe800000,CFG_FLASH_BASE}
+
+#define CFG_MAX_FLASH_BANKS	2		/* number of banks */
+#define CFG_MAX_FLASH_SECT	128		/* sectors per device */
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	60000		/* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT	500		/* Flash Write Timeout (ms) */
+
+#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_FLASH_EMPTY_INFO
+
+#define CFG_LBC_NONCACHE_BASE	0xf8000000
+
+#define CFG_BR2_PRELIM		0xf8201001	/* port size 16bit */
+#define CFG_OR2_PRELIM		0xfff06ff7	/* 1MB Compact Flash area*/
+
+#define CFG_BR3_PRELIM		0xf8100801	/* port size 8bit */
+#define CFG_OR3_PRELIM		0xfff06ff7	/* 1MB PIXIS area*/
+
+#define PIXIS_BASE	0xf8100000	/* PIXIS registers */
+#define PIXIS_ID		0x0	/* Board ID at offset 0 */
+#define PIXIS_VER		0x1	/* Board version at offset 1 */
+#define PIXIS_PVER		0x2	/* PIXIS FPGA version at offset 2 */
+#define PIXIS_RST		0x4	/* PIXIS Reset Control register */
+#define PIXIS_AUX		0x6	/* PIXIS Auxiliary register; Scratch
+					 * register */
+#define PIXIS_SPD		0x7	/* Register for SYSCLK speed */
+#define PIXIS_VCTL		0x10	/* VELA Control Register */
+#define PIXIS_VCFGEN0		0x12	/* VELA Config Enable 0 */
+#define PIXIS_VCFGEN1		0x13	/* VELA Config Enable 1 */
+#define PIXIS_VBOOT		0x16	/* VELA VBOOT Register */
+#define PIXIS_VSPEED0		0x17	/* VELA VSpeed 0 */
+#define PIXIS_VSPEED1		0x18	/* VELA VSpeed 1 */
+#define PIXIS_VCLKH		0x19	/* VELA VCLKH register */
+#define PIXIS_VCLKL		0x1A	/* VELA VCLKL register */
+
+
+/* define to use L1 as initial stack */
+#define CONFIG_L1_INIT_RAM	1
+#define CFG_INIT_L1_LOCK	1
+#define CFG_INIT_L1_ADDR	0xf4010000	/* Initial L1 address */
+#define CFG_INIT_L1_END		0x00004000	/* End of used area in RAM */
+
+/* define to use L2SRAM as initial stack */
+#undef CONFIG_L2_INIT_RAM
+#define CFG_INIT_L2_ADDR	0xf8fc0000
+#define CFG_INIT_L2_END		0x00040000	/* End of used area in RAM */
+
+#ifdef CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_ADDR	CFG_INIT_L1_ADDR
+#define CFG_INIT_RAM_END	CFG_INIT_L1_END
+#else
+#define CFG_INIT_RAM_ADDR	CFG_INIT_L2_ADDR
+#define CFG_INIT_RAM_END	CFG_INIT_L2_END
+#endif
+
+#define CFG_GBL_DATA_SIZE	128	/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
+
+/* Serial Port - controlled on board with jumper J8
+ * open - index 2
+ * shorted - index 1
+ */
+#define CONFIG_CONS_INDEX	1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE	\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef	CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU			"PowerPC,8544@0"
+#define OF_SOC			"soc8544@e0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH		"/soc8544@e0000000/serial@4500"
+
+/* I2C */
+#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C		/* I2C with hardware support */
+#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_EEPROM_ADDR	0x57
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3100
+
+/*
+ * General PCI
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+#define CFG_PCIE_PHYS		0x80000000	/* 1G PCIE TLB */
+#define CFG_PCI_PHYS		0xc0000000	/* 512M PCI TLB */
+
+#define CFG_PCI1_MEM_BASE	0xc0000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI1_IO_BASE	0x00000000
+#define CFG_PCI1_IO_PHYS	0xe1000000
+#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */
+
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS	0x00000000
+#define CFG_PCI_MEMORY_PHYS	0x00000000
+#define CFG_PCI_MEMORY_SIZE	0x80000000
+
+/* controller 2, Slot 1, tgtid 1, Base address 9000 */
+#define CFG_PCIE2_MEM_BASE	0x80000000
+#define CFG_PCIE2_MEM_PHYS	CFG_PCIE2_MEM_BASE
+#define CFG_PCIE2_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCIE2_IO_BASE	0x00000000
+#define CFG_PCIE2_IO_PHYS	0xe2000000
+#define CFG_PCIE2_IO_SIZE	0x00100000	/* 1M */
+
+/* controller 1, Slot 2,tgtid 2, Base address a000 */
+#define CFG_PCIE1_MEM_BASE	0xa0000000
+#define CFG_PCIE1_MEM_PHYS	CFG_PCIE1_MEM_BASE
+#define CFG_PCIE1_MEM_SIZE	0x08000000	/* 128M */
+#define CFG_PCIE1_MEM_BASE2	0xa8000000
+#define CFG_PCIE1_MEM_PHYS2	CFG_PCIE1_MEM_BASE2
+#define CFG_PCIE1_MEM_SIZE2	0x04000000	/* 64M */
+#define CFG_PCIE1_IO_BASE	0x00000000	/* reuse mem LAW */
+#define CFG_PCIE1_IO_PHYS	0xaf000000
+#define CFG_PCIE1_IO_SIZE	0x00100000	/* 1M */
+
+/* controller 3, direct to uli, tgtid 3, Base address b000 */
+#define CFG_PCIE3_MEM_BASE	0xb0000000
+#define CFG_PCIE3_MEM_PHYS	CFG_PCIE3_MEM_BASE
+#define CFG_PCIE3_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCIE3_IO_BASE	0x00000000
+#define CFG_PCIE3_IO_PHYS	0xe3000000
+#define CFG_PCIE3_IO_SIZE	0x00100000	/* 1M */
+
+#if defined(CONFIG_PCI)
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP			/* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_TULIP
+#define CONFIG_RTL8139
+
+#ifdef CONFIG_RTL8139
+/* This macro is used by RTL8139 but not defined in PPC architecture */
+#define KSEG1ADDR(x)		(x)
+#define _IO_BASE	0x00000000
+#endif
+
+#ifndef CONFIG_PCI_PNP
+	#define PCI_ENET0_IOADDR	CFG_PCI1_IO_BASE
+	#define PCI_ENET0_MEMADDR	CFG_PCI1_IO_BASE
+	#define PCI_IDSEL_NUMBER	0x11	/* IDSEL = AD11 */
+#endif
+
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SCSI_AHCI
+
+#ifdef CONFIG_SCSI_AHCI
+#define CONFIG_SATA_ULI5288
+#define CFG_SCSI_MAX_SCSI_ID	4
+#define CFG_SCSI_MAX_LUN	1
+#define CFG_SCSI_MAX_DEVICE 	(CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
+#define CFG_SCSI_MAXDEVICE	CFG_SCSI_MAX_DEVICE
+#endif /* SCSCI */
+
+#endif	/* CONFIG_PCI */
+
+
+#if defined(CONFIG_TSEC_ENET)
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 	1
+#endif
+
+#define CONFIG_MII		1	/* MII PHY management */
+#define CONFIG_MII_DEFAULT_TSEC	1	/* Allow unregistered phys */
+#define CONFIG_MPC85XX_TSEC1	1
+#define CONFIG_MPC85XX_TSEC1_NAME	"eTSEC1"
+#define CONFIG_MPC85XX_TSEC3	1
+#define CONFIG_MPC85XX_TSEC3_NAME	"eTSEC3"
+#undef CONFIG_MPC85XX_FEC
+
+#define TSEC1_PHY_ADDR		0
+#define TSEC3_PHY_ADDR		1
+
+#define TSEC1_PHYIDX		0
+#define TSEC3_PHYIDX		0
+
+#define CONFIG_ETHPRIME		"eTSEC1"
+
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+
+#endif	/* CONFIG_TSEC_ENET */
+
+/*
+ * Environment
+ */
+#define CFG_ENV_IS_IN_FLASH	1
+#if CFG_MONITOR_BASE > 0xfff80000
+#define CFG_ENV_ADDR		0xfff80000
+#else
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+#endif
+#define CFG_ENV_SIZE		0x2000
+#define CFG_ENV_SECT_SIZE	0x10000 /* 64K (one sector) */
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+#if defined(CONFIG_PCI)
+#define	CONFIG_COMMANDS	(CONFIG_CMD_DFL \
+				| CFG_CMD_PCI \
+				| CFG_CMD_PING \
+				| CFG_CMD_I2C \
+				| CFG_CMD_MII \
+				| CFG_CMD_BEDBUG \
+				| CFG_CMD_NET)
+#else
+#define	CONFIG_COMMANDS	(CONFIG_CMD_DFL \
+				| CFG_CMD_PING \
+				| CFG_CMD_I2C \
+				| CFG_CMD_MII)
+#endif
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	*/
+#define CFG_LOAD_ADDR	0x2000000	/* default load address */
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	(8 << 20) 	/* Initial Memory map for Linux*/
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE	32768
+#define CFG_CACHELINE_SIZE	32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+/* The mac addresses for all ethernet interface */
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_ETHADDR	00:E0:0C:02:00:FD
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR	00:E0:0C:02:01:FD
+#define CONFIG_HAS_ETH2
+#define CONFIG_ETH2ADDR	00:E0:0C:02:02:FD
+#define CONFIG_HAS_ETH3
+#define CONFIG_ETH3ADDR	00:E0:0C:02:03:FD
+#endif
+
+#define CONFIG_IPADDR	192.168.1.251
+
+#define CONFIG_HOSTNAME	8544ds_unknown
+#define CONFIG_ROOTPATH	/nfs/mpc85xx
+#define CONFIG_BOOTFILE	8544ds_tmt/uImage.uboot
+
+#define CONFIG_SERVERIP	192.168.0.1
+#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_NETMASK	255.255.0.0
+
+#define CONFIG_LOADADDR	1000000	/*default location for tftp and bootm*/
+
+#define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
+#undef	CONFIG_BOOTARGS	/* the boot command will set bootargs*/
+
+#define CONFIG_BAUDRATE	115200
+
+#if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || defined(CONFIG_PCIE3)
+#define PCIE_ENV \
+ "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \
+	"echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \
+ "pcie1regs=setenv a e000a; run pciereg\0"	\
+ "pcie2regs=setenv a e0009; run pciereg\0"	\
+ "pcie3regs=setenv a e000b; run pciereg\0"	\
+ "pcieerr=md ${a}020 1; md ${a}e00;"		\
+	"pci d.b $b.0 7 1; pci d.w $b.0 1e 1;"	\
+	"pci d.w $b.0 56 1;"			\
+	"pci d $b.0 104 1;pci d $b.0 110 1;pci d $b.0 130 1\0" \
+ "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff;"	\
+	"pci w.b $b.0 7 ff; pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff;" \
+	"pci w $b.0 104 ffffffff; pci w $b.0 110 ffffffff;" \
+	"pci w $b.0 130 ffffffff\0" \
+ "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0"	\
+ "pcie1err=setenv a e000a; run pcieerr\0"	\
+ "pcie2err=setenv a e0009; run pcieerr\0"	\
+ "pcie3err=setenv a e000b; run pcieerr\0"	\
+ "pcie1errc=setenv a e000a; run pcieerrc\0"	\
+ "pcie2errc=setenv a e0009; run pcieerrc\0"	\
+ "pcie3errc=setenv a e000b; run pcieerrc\0"
+#else
+#define	PCIE_ENV ""
+#endif
+
+#if defined(CONFIG_PCI1)
+#define PCI_ENV \
+ "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \
+	"echo e;md ${a}e00 9\0" 		\
+ "pci1regs=setenv a e0008; run pcireg\0"	\
+ "pcierr=md ${a}e00 8; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
+	"pci d.w $b.0 56 1\0"			\
+ "pcierrc=mw ${a}e00 ffffffff; pci w.b $b.0 7 ff; pci w.w $b.0 1e ffff;" \
+	"pci w.w $b.0 56 ffff\0"		\
+ "pci1err=setenv a e0008; run pcierr\0"		\
+ "pci1errc=setenv a e0008; run pcierrc\0"
+#else
+#define	PCI_ENV ""
+#endif
+
+#if defined(CONFIG_TSEC_ENET)
+#define ENET_ENV \
+ "enetreg1=md ${a}000 2; md ${a}010 9; md ${a}050 4; md ${a}08c 1;" \
+	"md ${a}098 2\0" \
+ "enetregt=echo t;md ${a}100 6; md ${a}140 2; md ${a}180 10; md ${a}200 10\0" \
+ "enetregr=echo r;md ${a}300 6; md ${a}330 5; md ${a}380 10; md ${a}400 10\0" \
+ "enetregm=echo mac;md ${a}500 5; md ${a}520 28;echo fifo;md ${a}a00 1;" \
+	"echo mib;md ${a}680 31\0" \
+ "enetreg=run enetreg1; run enetregm; run enetregt; run enetregr\0" \
+ "enet1regs=setenv a e0024; run enetreg\0" \
+ "enet3regs=setenv a e0026; run enetreg\0"
+#else
+#define ENET_ENV ""
+#endif
+
+#define	CONFIG_EXTRA_ENV_SETTINGS		\
+ "netdev=eth0\0"				\
+ "consoledev=ttyS0\0"				\
+ "ramdiskaddr=2000000\0"			\
+ "ramdiskfile=8544ds_tmt/ramdisk.uboot\0"	\
+ "fdtaddr=400000\0"				\
+ "fdtfile=8544ds_tmt/mpc8544ds.dtb\0"		\
+ "eoi=mw e00400b0 0\0" 				\
+ "iack=md e00400a0 1\0" 			\
+ "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \
+	"md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \
+ "ddrregs=setenv a e0002; run ddrreg\0" 	\
+ "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \
+	"md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" 	\
+ "guregs=setenv a e00e0; run gureg\0" 		\
+ "ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \
+ "ecmregs=setenv a e0001; run ecmreg\0" 	\
+ PCIE_ENV 	\
+ PCI_ENV 	\
+ ENET_ENV
+
+
+#define CONFIG_NFSBOOTCOMMAND		\
+ "setenv bootargs root=/dev/nfs rw "	\
+ "nfsroot=$serverip:$rootpath "		\
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;"	\
+ "tftp $loadaddr $bootfile;"		\
+ "tftp $fdtaddr $fdtfile;"		\
+ "bootm $loadaddr - $fdtaddr"
+
+
+#define CONFIG_RAMBOOTCOMMAND 		\
+ "setenv bootargs root=/dev/ram rw "	\
+ "console=$consoledev,$baudrate $othbootargs;"	\
+ "tftp $ramdiskaddr $ramdiskfile;"	\
+ "tftp $loadaddr $bootfile;"		\
+ "tftp $fdtaddr $fdtfile;"		\
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_BOOTCOMMAND 		\
+ "setenv bootargs root=/dev/sda3 rw "	\
+ "console=$consoledev,$baudrate $othbootargs;"	\
+ "tftp $loadaddr $bootfile;"		\
+ "tftp $fdtaddr $fdtfile;"		\
+ "bootm $loadaddr - $fdtaddr"
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 7c4849f..680009d 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -36,12 +36,12 @@
 #define CONFIG_MPC8548		1	/* MPC8548 specific */
 #define CONFIG_MPC8548CDS	1	/* MPC8548CDS board specific */
 
-#undef CONFIG_PCI
+#define CONFIG_PCI
 #define CONFIG_TSEC_ENET 		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
 #define CONFIG_DDR_DLL			/* possible DLL fix needed */
-#define CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
+#undef CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
 
 #define CONFIG_DDR_ECC			/* only for ECC DDR module */
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
@@ -340,22 +340,34 @@ extern unsigned long get_clock_freq(void);
 
 /*
  * General PCI
- * Addresses are mapped 1-1.
+ * Memory space is mapped 1-1, but I/O space must start from 0.
  */
 #define CFG_PCI1_MEM_BASE	0x80000000
 #define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI1_MEM_SIZE	0x10000000	/* 256M */
 #define CFG_PCI1_IO_BASE	0x00000000
 #define CFG_PCI1_IO_PHYS	0xe2000000
-#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */
+#define CFG_PCI1_IO_SIZE	0x00800000	/* 8M */
 
-#define CFG_PCI2_MEM_BASE	0xa0000000
+#define CFG_PCI2_MEM_BASE	0x90000000
 #define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
-#define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI2_MEM_SIZE	0x10000000	/* 256M */
 #define CFG_PCI2_IO_BASE	0x00000000
-#define CFG_PCI2_IO_PHYS	0xe2100000
-#define CFG_PCI2_IO_SIZE	0x00100000	/* 1M */
+#define CFG_PCI2_IO_PHYS	0xe2800000
+#define CFG_PCI2_IO_SIZE	0x00800000	/* 8M */
 
+#define CFG_PEX_MEM_BASE	0xa0000000
+#define CFG_PEX_MEM_PHYS	CFG_PEX_MEM_BASE
+#define CFG_PEX_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PEX_IO_BASE		0x00000000
+#define CFG_PEX_IO_PHYS		0xe3000000
+#define CFG_PEX_IO_SIZE		0x01000000	/* 16M */
+
+/*
+ * RapidIO MMU
+ */
+#define CFG_RIO_MEM_BASE	0xC0000000
+#define CFG_RIO_MEM_SIZE	0x20000000	/* 512M */
 
 #if defined(CONFIG_PCI)
 
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 835bf5c..21e6637 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -320,14 +320,14 @@
 
 /*
  * General PCI
- * Addresses are mapped 1-1.
+ * Memory space is mapped 1-1, but I/O space must start from 0.
  */
 #define CFG_PCI1_MEM_BASE	0x80000000
 #define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
 #define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI1_IO_BASE	0xe2000000
-#define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE	0x1000000	/* 16M */
+#define CFG_PCI1_IO_BASE	0x00000000
+#define CFG_PCI1_IO_PHYS	0xe2000000
+#define CFG_PCI1_IO_SIZE	0x100000	/* 1M */
 
 #if defined(CONFIG_PCI)
 
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
new file mode 100644
index 0000000..3f65644
--- /dev/null
+++ b/include/configs/MPC8568MDS.h
@@ -0,0 +1,505 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * mpc8568mds board configuration file
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE		1	/* BOOKE */
+#define CONFIG_E500			1	/* BOOKE e500 family */
+#define CONFIG_MPC85xx		1	/* MPC8540/60/55/41/48/68 */
+#define CONFIG_MPC8568		1	/* MPC8568 specific */
+#define CONFIG_MPC8568MDS	1	/* MPC8568MDS board specific */
+
+#undef CONFIG_PCI
+#define CONFIG_TSEC_ENET 		/* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
+#define CONFIG_DDR_DLL			/* possible DLL fix needed */
+/*#define CONFIG_DDR_2T_TIMING		 Sets the 2T timing bit */
+
+/*#define CONFIG_DDR_ECC*/			/* only for ECC DDR module */
+/*#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER*/	/* 	 DDR controller or DMA? */
+#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
+
+
+/*
+ * When initializing flash, if we cannot find the manufacturer ID,
+ * assume this is the AMD flash associated with the MDS board.
+ * This allows booting from a promjet.
+ */
+#define CONFIG_ASSUME_AMD_FLASH
+
+#define MPC85xx_DDR_SDRAM_CLK_CNTL	/* 85xx has clock control reg */
+
+#ifndef __ASSEMBLY__
+extern unsigned long get_clock_freq(void);
+#endif						  /*Replace a call to get_clock_freq (after it is implemented)*/
+#define CONFIG_SYS_CLK_FREQ	66000000 /*TODO: restore if wanting to read from BCSR: get_clock_freq()*/ /* sysclk for MPC85xx */
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+/*#define CONFIG_L2_CACHE*/		    	    /* toggle L2 cache 	*/
+#define CONFIG_BTB						/* toggle branch predition */
+#define CONFIG_ADDR_STREAMING		    /* toggle addr streaming   */
+
+/*
+ * Only possible on E500 Version 2 or newer cores.
+ */
+#define CONFIG_ENABLE_36BIT_PHYS	1
+
+
+#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
+
+#undef	CFG_DRAM_TEST			/* memory test, takes time */
+#define CFG_MEMTEST_START	0x00200000	/* memtest works on */
+#define CFG_MEMTEST_END		0x00400000
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_CCSRBAR_DEFAULT 	0xff700000	/* CCSRBAR Default */
+#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
+#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
+#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+
+#define SPD_EEPROM_ADDRESS	0x51		/* DDR DIMM */
+
+/*
+ * Make sure required options are set
+ */
+#ifndef CONFIG_SPD_EEPROM
+#error ("CONFIG_SPD_EEPROM is required")
+#endif
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+
+/*
+ * Local Bus Definitions
+ */
+
+/*
+ * FLASH on the Local Bus
+ * Two banks, 8M each, using the CFI driver.
+ * Boot from BR0/OR0 bank at 0xff00_0000
+ * Alternate BR1/OR1 bank at 0xff80_0000
+ *
+ * BR0, BR1:
+ *    Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0
+ *    Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0
+ *    Port Size = 16 bits = BRx[19:20] = 10
+ *    Use GPCM = BRx[24:26] = 000
+ *    Valid = BRx[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001    BR0
+ * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001    BR1
+ *
+ * OR0, OR1:
+ *    Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0
+ *    Reserved ORx[17:18] = 11, confusion here?
+ *    CSNT = ORx[20] = 1
+ *    ACS = half cycle delay = ORx[21:22] = 11
+ *    SCY = 6 = ORx[24:27] = 0110
+ *    TRLX = use relaxed timing = ORx[29] = 1
+ *    EAD = use external address latch delay = OR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65    ORx
+ */
+#define CFG_BCSR_BASE		0xf8000000
+
+#define CFG_FLASH_BASE		0xfe000000	/* start of FLASH 32M */
+
+/*Chip select 0 - Flash*/
+#define CFG_BR0_PRELIM		0xfe001001
+#define	CFG_OR0_PRELIM		0xfe006ff7
+
+/*Chip slelect 1 - BCSR*/
+#define CFG_BR1_PRELIM		0xf8000801
+#define	CFG_OR1_PRELIM		0xffffe9f7
+
+/*#define CFG_FLASH_BANKS_LIST	{0xff800000, CFG_FLASH_BASE} */
+#define CFG_MAX_FLASH_BANKS		1		/* number of banks */
+#define CFG_MAX_FLASH_SECT		512		/* sectors per device */
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT	500		/* Flash Write Timeout (ms) */
+
+#define CFG_MONITOR_BASE    	TEXT_BASE	/* start of monitor */
+
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_FLASH_EMPTY_INFO
+
+
+/*
+ * SDRAM on the LocalBus
+ */
+#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM	 */
+#define CFG_LBC_SDRAM_SIZE	64			/* LBC SDRAM is 64MB */
+
+
+/*Chip select 2 - SDRAM*/
+#define CFG_BR2_PRELIM      0xf0001861
+#define CFG_OR2_PRELIM		0xfc006901
+
+#define CFG_LBC_LCRR		0x00030004    	/* LB clock ratio reg */
+#define CFG_LBC_LBCR		0x00000000    	/* LB config reg */
+#define CFG_LBC_LSRT		0x20000000  	/* LB sdram refresh timer */
+#define CFG_LBC_MRTPR		0x00000000  	/* LB refresh timer prescal*/
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_RFEN	(1 << (31 -  1))
+#define CFG_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
+#define CFG_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
+#define CFG_LBC_LSDMR_RFCR16	(7 << (31 - 16))
+#define CFG_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
+#define CFG_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
+#define CFG_LBC_LSDMR_BL8	(1 << (31 - 23))
+#define CFG_LBC_LSDMR_WRC4	(0 << (31 - 27))
+#define CFG_LBC_LSDMR_CL3	(3 << (31 - 31))
+
+#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+
+/*
+ * Common settings for all Local Bus SDRAM commands.
+ * At run time, either BSMA1516 (for CPU 1.1)
+ *                  or BSMA1617 (for CPU 1.0) (old)
+ * is OR'ed in too.
+ */
+#define CFG_LBC_LSDMR_COMMON	( CFG_LBC_LSDMR_RFCR16		\
+				| CFG_LBC_LSDMR_PRETOACT7	\
+				| CFG_LBC_LSDMR_ACTTORW7	\
+				| CFG_LBC_LSDMR_BL8		\
+				| CFG_LBC_LSDMR_WRC4		\
+				| CFG_LBC_LSDMR_CL3		\
+				| CFG_LBC_LSDMR_RFEN		\
+				)
+
+/*
+ * The bcsr registers are connected to CS3 on MDS.
+ * The new memory map places bcsr at 0xf8000000.
+ *
+ * For BR3, need:
+ *    Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0
+ *    port-size = 8-bits  = BR[19:20] = 01
+ *    no parity checking  = BR[21:22] = 00
+ *    GPMC for MSEL       = BR[24:26] = 000
+ *    Valid               = BR[31]    = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801
+ *
+ * For OR3, need:
+ *    1 MB mask for AM,   OR[0:16]  = 1111 1111 1111 0000 0
+ *    disable buffer ctrl OR[19]    = 0
+ *    CSNT                OR[20]    = 1
+ *    ACS                 OR[21:22] = 11
+ *    XACS                OR[23]    = 1
+ *    SCY 15 wait states  OR[24:27] = 1111	max is suboptimal but safe
+ *    SETA                OR[28]    = 0
+ *    TRLX                OR[29]    = 1
+ *    EHTR                OR[30]    = 1
+ *    EAD extra time      OR[31]    = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7
+ */
+#define CFG_BCSR (0xf8000000)
+
+/*Chip slelect 4 - PIB*/
+#define CFG_BR4_PRELIM   0xf8008801
+#define CFG_OR4_PRELIM   0xffffe9f7
+
+/*Chip select 5 - PIB*/
+#define CFG_BR5_PRELIM	 0xf8010801
+#define CFG_OR5_PRELIM	 0xffff69f7
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK 	1
+#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
+#define CFG_INIT_RAM_END    	0x4000	    /* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE  	128	    /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN	    	(256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN	    	(128 * 1024)	/* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX		1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE    1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1        (CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2        (CFG_CCSRBAR+0x4600)
+
+/* Use the HUSH parser*/
+#define CFG_HUSH_PARSER
+#ifdef  CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU			"PowerPC,8568@0"
+#define OF_SOC			"soc8568@e0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH		"/soc8568@e0000000/serial@4600"
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C		/* I2C with hardware support*/
+#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_EEPROM_ADDR	0x57
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3000
+
+/*
+ * General PCI
+ * Memory Addresses are mapped 1-1. I/O is mapped from 0
+ */
+#define CFG_PCI1_MEM_BASE	0x80000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCI1_IO_BASE	0x00000000
+#define CFG_PCI1_IO_PHYS	0xe2000000
+#define CFG_PCI1_IO_SIZE	0x00800000	/* 8M */
+
+#define CFG_PEX_MEM_BASE	0xa0000000
+#define CFG_PEX_MEM_PHYS	CFG_PEX_MEM_BASE
+#define CFG_PEX_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PEX_IO_BASE		0x00000000
+#define CFG_PEX_IO_PHYS		0xe2800000
+#define CFG_PEX_IO_SIZE		0x00800000	/* 8M */
+
+#define CFG_SRIO_MEM_BASE	0xc0000000
+
+#if defined(CONFIG_PCI)
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_TULIP
+
+#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
+
+#endif	/* CONFIG_PCI */
+
+
+#if defined(CONFIG_TSEC_ENET)
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 	1
+#endif
+
+#define CONFIG_MII		1	/* MII PHY management */
+#define CONFIG_MPC85XX_TSEC1	1
+#define CONFIG_MPC85XX_TSEC1_NAME	"eTSEC0"
+#define CONFIG_MPC85XX_TSEC2	1
+#define CONFIG_MPC85XX_TSEC2_NAME	"eTSEC1"
+#undef  CONFIG_MPC85XX_TSEC3
+#undef  CONFIG_MPC85XX_TSEC4
+#undef  CONFIG_MPC85XX_FEC
+
+#define TSEC1_PHY_ADDR		2
+#define TSEC2_PHY_ADDR		3
+
+#define TSEC1_PHYIDX		0
+#define TSEC2_PHYIDX		0
+
+/* Options are: eTSEC[0-3] */
+#define CONFIG_ETHPRIME		"eTSEC0"
+
+#endif	/* CONFIG_TSEC_ENET */
+
+/*
+ * Environment
+ */
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+#define CFG_ENV_SIZE		0x2000
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+#if defined(CONFIG_PCI)
+#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL \
+				| CFG_CMD_PCI \
+				| CFG_CMD_PING \
+				| CFG_CMD_I2C \
+				| CFG_CMD_MII)
+#else
+#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL \
+				| CFG_CMD_PING \
+				| CFG_CMD_I2C \
+				| CFG_CMD_MII)
+#endif
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	*/
+#define CFG_LOAD_ADDR	0x2000000	/* default load address */
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE	256			/* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	(8 << 20) 	/* Initial Memory map for Linux*/
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE	32768
+#define CFG_CACHELINE_SIZE	32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+/* The mac addresses for all ethernet interface */
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_ETHADDR   00:E0:0C:00:00:FD
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR  00:E0:0C:00:01:FD
+#define CONFIG_HAS_ETH2
+#define CONFIG_ETH2ADDR  00:E0:0C:00:02:FD
+#endif
+
+#define CONFIG_IPADDR    192.168.1.253
+
+#define CONFIG_HOSTNAME  unknown
+#define CONFIG_ROOTPATH  /nfsroot
+#define CONFIG_BOOTFILE  your.uImage
+
+#define CONFIG_SERVERIP  192.168.1.1
+#define CONFIG_GATEWAYIP 192.168.1.1
+#define CONFIG_NETMASK   255.255.255.0
+
+#define CONFIG_LOADADDR  200000   /*default location for tftp and bootm*/
+
+#define CONFIG_BOOTDELAY 10       /* -1 disables auto-boot */
+#undef  CONFIG_BOOTARGS           /* the boot command will set bootargs*/
+
+#define CONFIG_BAUDRATE	115200
+
+#define	CONFIG_EXTRA_ENV_SETTINGS				        \
+   "netdev=eth0\0"                                                      \
+   "consoledev=ttyS0\0"                                                 \
+   "ramdiskaddr=600000\0"                                               \
+   "ramdiskfile=your.ramdisk.u-boot\0"					\
+   "fdtaddr=400000\0"							\
+   "fdtfile=your.fdt.dtb\0"						\
+   "nfsargs=setenv bootargs root=/dev/nfs rw "				\
+      "nfsroot=$serverip:$rootpath "					\
+      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+      "console=$consoledev,$baudrate $othbootargs\0"			\
+   "ramargs=setenv bootargs root=/dev/ram rw "				\
+      "console=$consoledev,$baudrate $othbootargs\0"			\
+
+
+#define CONFIG_NFSBOOTCOMMAND	                                        \
+   "run nfsargs;"							\
+   "tftp $loadaddr $bootfile;"                                          \
+   "tftp $fdtaddr $fdtfile;"						\
+   "bootm $loadaddr - $fdtaddr"
+
+
+#define CONFIG_RAMBOOTCOMMAND \
+   "run ramargs;"							\
+   "tftp $ramdiskaddr $ramdiskfile;"                                    \
+   "tftp $loadaddr $bootfile;"                                          \
+   "bootm $loadaddr $ramdiskaddr"
+
+#define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index bbe3505..41daa2b 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -577,6 +577,7 @@
 #define CONFIG_HOSTNAME		unknown
 #define CONFIG_ROOTPATH		/opt/nfsroot
 #define CONFIG_BOOTFILE		uImage
+#define CONFIG_UBOOTPATH	u-boot.bin	/* U-Boot image on TFTP server */
 
 #define CONFIG_SERVERIP		192.168.1.1
 #define CONFIG_GATEWAYIP	192.168.1.1
@@ -592,10 +593,17 @@
 
 #define	CONFIG_EXTRA_ENV_SETTINGS				        \
    "netdev=eth0\0"                                                      \
+   "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" 				\
+   "tftpflash=tftpboot $loadaddr $uboot; " 			\
+	"protect off " MK_STR(TEXT_BASE) " +$filesize; " 	\
+	"erase " MK_STR(TEXT_BASE) " +$filesize; " 		\
+	"cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " 	\
+	"protect on " MK_STR(TEXT_BASE) " +$filesize; " 	\
+	"cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" 	\
    "consoledev=ttyS0\0"                                                 \
    "ramdiskaddr=2000000\0"						\
    "ramdiskfile=your.ramdisk.u-boot\0"                                  \
-   "dtbaddr=400000\0"						\
+   "dtbaddr=c00000\0"						\
    "dtbfile=mpc8641_hpcn.dtb\0"                                  \
    "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \
    "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \
diff --git a/include/configs/NC650.h b/include/configs/NC650.h
index 8da29c4..a12c8da 100644
--- a/include/configs/NC650.h
+++ b/include/configs/NC650.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2006 Detlev Zundel, dzu@denx.de
+ * (C) Copyright 2006, 2007 Detlev Zundel, dzu@denx.de
  * (C) Copyright 2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
@@ -237,18 +237,8 @@
 /*
  * NAND flash support
  */
-#define CFG_NAND_LEGACY
-
 #define CFG_MAX_NAND_DEVICE	1
-#define NAND_ChipID_UNKNOWN	0x00
-#define SECTORSIZE		512
-#define NAND_MAX_FLOORS		1
 #define NAND_MAX_CHIPS		1
-#define ADDR_PAGE		2
-#define ADDR_COLUMN_PAGE	3
-#define ADDR_COLUMN		1
-#define NAND_NO_RB
-
 
 /*-----------------------------------------------------------------------
  * SYPCR - System Protection Control					11-9
diff --git a/include/configs/PM520.h b/include/configs/PM520.h
index 9c241e6..7d91a01 100644
--- a/include/configs/PM520.h
+++ b/include/configs/PM520.h
@@ -160,7 +160,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBSPEED_133   		/* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK   		/* define for 133MHz speed */
 #endif
 /*
  * I2C configuration
diff --git a/include/configs/SBC8560.h b/include/configs/SBC8560.h
deleted file mode 100644
index 8b46a17..0000000
--- a/include/configs/SBC8560.h
+++ /dev/null
@@ -1,410 +0,0 @@
-/*
- * (C) Copyright 2002,2003 Motorola,Inc.
- * Xianghua Xiao <X.Xiao@motorola.com>
- *
- * (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
- * Added support for Wind River SBC8560 board
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* mpc8560ads board configuration file */
-/* please refer to doc/README.mpc85xx for more info */
-/* make sure you change the MAC address and other network params first,
- * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#if XXX
-#define DEBUG		      /* General debug */
-#define ET_DEBUG
-#endif
-#define TSEC_DEBUG
-
-/* High Level Configuration Options */
-#define CONFIG_BOOKE		1	/* BOOKE			*/
-#define CONFIG_E500		1	/* BOOKE e500 family		*/
-#define CONFIG_MPC85xx		1	/* MPC8540/MPC8560		*/
-#define CONFIG_MPC85xx_REV1	1	/* MPC85xx Rev 1.0 chip		*/
-
-
-#define CONFIG_CPM2		1	/* has CPM2 */
-#define CONFIG_SBC8560      	1   	/* configuration for SBC8560 board */
-
-#define CONFIG_MPC8560ADS	1	/* MPC8560ADS board specific (supplement)	*/
-
-#define CONFIG_TSEC_ENET		/* tsec ethernet support	*/
-#undef	CONFIG_PCI			/* pci ethernet support		*/
-#undef  CONFIG_ETHER_ON_FCC		/* cpm FCC ethernet support	*/
-
-
-#define CONFIG_ENV_OVERWRITE
-
-/* Using Localbus SDRAM to emulate flash before we can program the flash,
- * normally you need a flash-boot image(u-boot.bin), if so undef this.
- */
-#undef CONFIG_RAM_AS_FLASH
-
-#if defined(CONFIG_PCI_66)		/* some PCI card is 33Mhz only	*/
-  #define CONFIG_SYS_CLK_FREQ	66000000/* sysclk for MPC85xx		*/
-#else
-  #define CONFIG_SYS_CLK_FREQ	33000000/* most pci cards are 33Mhz	*/
-#endif
-
-/* below can be toggled for performance analysis. otherwise use default */
-#define CONFIG_L2_CACHE			    /* toggle L2 cache		*/
-#undef	CONFIG_BTB			    /* toggle branch predition	*/
-#undef	CONFIG_ADDR_STREAMING		    /* toggle addr streaming	*/
-
-#define CONFIG_BOARD_EARLY_INIT_F 1	    /* Call board_early_init_f	*/
-
-#undef	CFG_DRAM_TEST			    /* memory test, takes time	*/
-#define CFG_MEMTEST_START	0x00200000  /* memtest region */
-#define CFG_MEMTEST_END		0x00400000
-
-#if (defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) || \
-     defined(CONFIG_PCI) && defined(CONFIG_ETHER_ON_FCC) || \
-     defined(CONFIG_TSEC_ENET) && defined(CONFIG_ETHER_ON_FCC))
-#error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC."
-#endif
-
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default	*/
-
-#if XXX
-  #define CFG_CCSRBAR		0xfdf00000	/* relocated CCSRBAR	*/
-#else
-  #define CFG_CCSRBAR		0xff700000	/* default CCSRBAR	*/
-#endif
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR	*/
-
-#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory	 */
-#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
-#define CFG_SDRAM_SIZE		512		/* DDR is 512MB */
-#define SPD_EEPROM_ADDRESS	0x55		/*  DDR DIMM */
-
-#undef  CONFIG_DDR_ECC				/* only for ECC DDR module	*/
-#undef  CONFIG_SPD_EEPROM			/* Use SPD EEPROM for DDR setup */
-
-#if defined(CONFIG_MPC85xx_REV1)
-  #define CONFIG_DDR_DLL			/* possible DLL fix needed	*/
-#endif
-
-#undef CONFIG_CLOCKS_IN_MHZ
-
-#if defined(CONFIG_RAM_AS_FLASH)
-  #define CFG_LBC_SDRAM_BASE	0xfc000000	/* Localbus SDRAM */
-  #define CFG_FLASH_BASE	0xf8000000      /* start of FLASH 8M  */
-  #define CFG_BR0_PRELIM	0xf8000801      /* port size 8bit */
-  #define CFG_OR0_PRELIM	0xf8000ff7	/* 8MB Flash		*/
-#else /* Boot from real Flash */
-  #define CFG_LBC_SDRAM_BASE	0xf8000000	/* Localbus SDRAM */
-  #define CFG_FLASH_BASE	0xff800000      /* start of FLASH 8M    */
-  #define CFG_BR0_PRELIM	0xff800801      /* port size 8bit      */
-  #define CFG_OR0_PRELIM	0xff800ff7	/* 8MB Flash		*/
-#endif
-#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB	*/
-
-/* local bus definitions */
-#define CFG_BR1_PRELIM		0xe4001801	/* 64M, 32-bit flash */
-#define CFG_OR1_PRELIM		0xfc000ff7
-
-#define CFG_BR2_PRELIM		0x00000000	/* CS2 not used */
-#define CFG_OR2_PRELIM		0x00000000
-
-#define CFG_BR3_PRELIM		0xf0001861	/* 64MB localbus SDRAM	*/
-#define CFG_OR3_PRELIM		0xfc000cc1
-
-#if defined(CONFIG_RAM_AS_FLASH)
-  #define CFG_BR4_PRELIM	0xf4001861	/* 64M localbus SDRAM */
-#else
-  #define CFG_BR4_PRELIM	0xf8001861	/* 64M localbus SDRAM */
-#endif
-#define CFG_OR4_PRELIM		0xfc000cc1
-
-#define CFG_BR5_PRELIM		0xfc000801	/* 16M CS5 misc devices */
-#if 1
-  #define CFG_OR5_PRELIM	0xff000ff7
-#else
-  #define CFG_OR5_PRELIM	0xff0000f0
-#endif
-
-#define CFG_BR6_PRELIM		0xe0001801	/* 64M, 32-bit flash */
-#define CFG_OR6_PRELIM		0xfc000ff7
-#define CFG_LBC_LCRR		0x00030002	/* local bus freq	*/
-#define CFG_LBC_LBCR		0x00000000
-#define CFG_LBC_LSRT		0x20000000
-#define CFG_LBC_MRTPR		0x20000000
-#define CFG_LBC_LSDMR_1		0x2861b723
-#define CFG_LBC_LSDMR_2		0x0861b723
-#define CFG_LBC_LSDMR_3		0x0861b723
-#define CFG_LBC_LSDMR_4		0x1861b723
-#define CFG_LBC_LSDMR_5		0x4061b723
-
-/* just hijack the MOT BCSR def for SBC8560 misc devices */
-#define CFG_BCSR		((CFG_BR5_PRELIM & 0xff000000)|0x00400000)
-/* the size of CS5 needs to be >= 16M for TLB and LAW setups */
-
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0x70000000	/* Initial RAM address	*/
-#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
-
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
-
-/* Serial Port */
-#undef  CONFIG_CONS_ON_SCC			/* define if console on SCC */
-#undef	CONFIG_CONS_NONE			/* define if console on something else */
-
-#define CONFIG_CONS_INDEX     1
-#undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		1843200 /* get_bus_freq(0) */
-#define CONFIG_BAUDRATE		9600
-
-#define CFG_BAUDRATE_TABLE  \
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-
-#define CFG_NS16550_COM1	((CFG_BR5_PRELIM & 0xff000000)+0x00700000)
-#define CFG_NS16550_COM2	((CFG_BR5_PRELIM & 0xff000000)+0x00800000)
-
-/* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
-#endif
-
-/* I2C */
-#define	 CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-
-#define CFG_PCI_MEM_BASE	0xC0000000
-#define CFG_PCI_MEM_PHYS	0xC0000000
-#define CFG_PCI_MEM_SIZE	0x10000000
-
-#if defined(CONFIG_TSEC_ENET)		/* TSEC Ethernet port */
-
-#  define CONFIG_NET_MULTI	1
-#  define CONFIG_MII		1	/* MII PHY management		*/
-#  define CONFIG_MPC85xx_TSEC1
-#  define CONFIG_MPC85xx_TSEC1_NAME	"TSEC0"
-#  define TSEC1_PHY_ADDR	25
-#  define TSEC1_PHYIDX		0
-/* Options are: TSEC0 */
-#  define CONFIG_ETHPRIME		"TSEC0"
-
-
-#elif defined(CONFIG_ETHER_ON_FCC)	/* CPM FCC Ethernet */
-
-  #undef  CONFIG_ETHER_NONE		/* define if ether on something else */
-  #define CONFIG_ETHER_ON_FCC2		/* cpm FCC ethernet support	*/
-  #define CONFIG_ETHER_INDEX	2	/* which channel for ether  */
-
-  #if (CONFIG_ETHER_INDEX == 2)
-    /*
-     * - Rx-CLK is CLK13
-     * - Tx-CLK is CLK14
-     * - Select bus for bd/buffers
-     * - Full duplex
-     */
-    #define CFG_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-    #define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-    #define CFG_CPMFCR_RAMTYPE	0
-    #define CFG_FCC_PSMR	(FCC_PSMR_FDE)
-
-  #elif (CONFIG_ETHER_INDEX == 3)
-    /* need more definitions here for FE3 */
-  #endif				/* CONFIG_ETHER_INDEX */
-
-  #define CONFIG_MII			/* MII PHY management */
-  #define CONFIG_BITBANGMII		/* bit-bang MII PHY management	*/
-  /*
-   * GPIO pins used for bit-banged MII communications
-   */
-  #define MDIO_PORT	2		/* Port C */
-  #define MDIO_ACTIVE	(iop->pdir |=  0x00400000)
-  #define MDIO_TRISTATE	(iop->pdir &= ~0x00400000)
-  #define MDIO_READ	((iop->pdat &  0x00400000) != 0)
-
-  #define MDIO(bit)	if(bit) iop->pdat |=  0x00400000; \
-			else	iop->pdat &= ~0x00400000
-
-  #define MDC(bit)	if(bit) iop->pdat |=  0x00200000; \
-			else	iop->pdat &= ~0x00200000
-
-  #define MIIDELAY	udelay(1)
-
-#endif
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant		*/
-#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver		*/
-#if 0
-#define CFG_FLASH_USE_BUFFER_WRITE 1    /* use buffered writes (20x faster)     */
-#define CFG_FLASH_PROTECTION		/* use hardware protection		*/
-#endif
-#define CFG_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	200000		/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	50000		/* Timeout for Flash Write (in ms)	*/
-
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor	*/
-
-#if 0
-/* XXX This doesn't work and I don't want to fix it */
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-  #define CFG_RAMBOOT
-#else
-  #undef  CFG_RAMBOOT
-#endif
-#endif
-
-/* Environment */
-#if !defined(CFG_RAMBOOT)
-  #if defined(CONFIG_RAM_AS_FLASH)
-    #define CFG_ENV_IS_NOWHERE
-    #define CFG_ENV_ADDR	(CFG_FLASH_BASE + 0x100000)
-    #define CFG_ENV_SIZE	0x2000
-  #else
-    #define CFG_ENV_IS_IN_FLASH	1
-    #define CFG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env */
-    #define CFG_ENV_ADDR	(CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
-    #define CFG_ENV_SIZE	0x2000 /* CFG_ENV_SECT_SIZE */
-  #endif
-#else
-  #define CFG_NO_FLASH		1	/* Flash is not usable now	*/
-  #define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only	*/
-  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-  #define CFG_ENV_SIZE		0x2000
-#endif
-
-#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=192.168.0.251:/tftpboot ip=192.168.0.105:192.168.0.251::255.255.255.0:sbc8560:eth0:off console=ttyS0,9600"
-/*#define CONFIG_BOOTARGS      "root=/dev/ram rw console=ttyS0,115200"*/
-#define CONFIG_BOOTCOMMAND	"bootm 0xff800000 0xffa00000"
-#define CONFIG_BOOTDELAY	5	/* -1 disable autoboot */
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
-
-#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
-  #if defined(CONFIG_PCI)
-    #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_PCI | \
-				CFG_CMD_PING | CFG_CMD_I2C) & \
-				 ~(CFG_CMD_ENV | \
-				  CFG_CMD_LOADS ))
-  #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC))
-    #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_MII | \
-				CFG_CMD_PING | CFG_CMD_I2C) & \
-				~(CFG_CMD_ENV))
-  #endif
-#else
-  #if defined(CONFIG_PCI)
-    #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_PCI | \
-				CFG_CMD_PING | CFG_CMD_I2C)
-  #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC))
-    #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_MII | \
-				CFG_CMD_PING | CFG_CMD_I2C)
-  #endif
-#endif
-
-#include <cmd_confdefs.h>
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"SBC8560=> " /* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-  #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-  #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR	0x1000000	/* default load address */
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
-
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-  #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
-
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-  #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-  #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
-#endif
-
-/*Note: change below for your network setting!!! */
-#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
-#  define CONFIG_ETHADDR	00:vv:ww:xx:yy:8a
-#  define CONFIG_HAS_ETH1
-#  define CONFIG_ETH1ADDR	00:vv:ww:xx:yy:8b
-#  define CONFIG_HAS_ETH2
-#  define CONFIG_ETH2ADDR	00:vv:ww:xx:yy:8c
-#endif
-
-#define CONFIG_SERVERIP		YourServerIP
-#define CONFIG_IPADDR		YourTargetIP
-#define CONFIG_GATEWAYIP	YourGatewayIP
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_HOSTNAME		SBC8560
-#define CONFIG_ROOTPATH		YourRootPath
-#define CONFIG_BOOTFILE		YourImageName
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/SMN42.h b/include/configs/SMN42.h
new file mode 100755
index 0000000..d588818
--- /dev/null
+++ b/include/configs/SMN42.h
@@ -0,0 +1,199 @@
+/*
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Configuation settings for the SMN42 board from Siemens.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * If we are developing, we might want to start u-boot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#undef CONFIG_INIT_CRITICAL		/* undef for developing */
+
+#undef CONFIG_SKIP_LOWLEVEL_INIT
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARM7		1	/* This is a ARM7 CPU	*/
+#define CONFIG_ARM_THUMB	1	/* this is an ARM720TDMI */
+#define CONFIG_LPC2292
+#undef	CONFIG_ARM7_REVD		/* disable ARM720 REV.D Workarounds */
+
+#undef CONFIG_USE_IRQ			/* don't need them anymore */
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL1		1	/* we use Serial line 1 */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE		115200
+
+#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+
+/* enable I2C and select the hardware/software driver */
+#undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
+#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
+/* this would be 0xAE if E0, E1 and E2 were pulled high */
+#define CFG_I2C_SLAVE		0xA0
+#define CFG_I2C_EEPROM_ADDR	(0xA0 >> 1)
+#define CFG_I2C_EEPROM_ADDR_LEN 2 /* 16 bit address */
+#define CFG_EEPROM_PAGE_WRITE_BITS 6 /* 64 bytes per write */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
+/* not used but required by devices.c */
+#define CFG_I2C_SPEED 10000
+
+#ifdef CONFIG_SOFT_I2C
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+#define SCL		0x00000004		/* P0.2 */
+#define SDA		0x00000008		/* P0.3 */
+
+#define	I2C_READ	((GET32(IO0PIN) & SDA) ? 1 : 0)
+#define	I2C_SDA(x)	{ if (x) PUT32(IO0SET, SDA); else PUT32(IO0CLR, SDA); }
+#define	I2C_SCL(x)	{ if (x) PUT32(IO0SET, SCL); else PUT32(IO0CLR, SCL); }
+#define	I2C_DELAY	{ udelay(100); }
+#define	I2C_ACTIVE	{ unsigned int i2ctmp; \
+					  i2ctmp = GET32(IO0DIR); \
+					  i2ctmp |= SDA; \
+					  PUT32(IO0DIR, i2ctmp); }
+#define	I2C_TRISTATE	{ unsigned int i2ctmp; \
+					      i2ctmp = GET32(IO0DIR); \
+					      i2ctmp &= ~SDA; \
+						  PUT32(IO0DIR, i2ctmp); }
+#endif /* CONFIG_SOFT_I2C */
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_FAT		| \
+				CFG_CMD_MMC		| \
+				CFG_CMD_NET		| \
+				CFG_CMD_EEPROM	| \
+				CFG_CMD_PING)
+
+#define CONFIG_DOS_PARTITION
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY	5
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_LONGHELP				/* undef to save memory		*/
+#define	CFG_PROMPT		"SMN42 # " /* Monitor Command Prompt	*/
+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x81800000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x83000000	/* 24 MB in SRAM	*/
+
+#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+
+#define	CFG_LOAD_ADDR		0x81000000	/* default load address	*/
+						/* for uClinux img is here*/
+
+#define CFG_SYS_CLK_FREQ	58982400	/* Hz */
+#define	CFG_HZ			2048		/* decrementer freq in Hz */
+
+						/* valid baudrates */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of SRAM */
+#define PHYS_SDRAM_1		0x81000000 /* SRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE	0x02000000 /* 32 MB SRAM */
+
+/* This is the external flash */
+#define PHYS_FLASH_1		0x80000000 /* Flash Bank #1 */
+#define PHYS_FLASH_SIZE		0x01000000 /* 16 MB */
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+
+/*
+ * The first entry in CFG_FLASH_BANKS_LIST is a dummy, but it must be present.
+ */
+#define CFG_FLASH_BANKS_LIST	{ 0, PHYS_FLASH_1 }
+#define CFG_FLASH_ADDR0			0x555
+#define CFG_FLASH_ADDR1			0x2AA
+#define CFG_FLASH_ERASE_TOUT	16384	/* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT	5	/* Timeout for Flash Write (in ms) */
+
+#define CFG_MAX_FLASH_SECT	128  /* max number of sectors on one chip    */
+
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+
+#define	CFG_ENV_IS_IN_FLASH	1
+/* The Environment Sector is in the CPU-internal flash */
+#define CFG_FLASH_BASE		0
+#define CFG_ENV_OFFSET		0x3C000
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#define CFG_ENV_SIZE		0x2000 /* Total Size of Environment Sector	*/
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_MMC			1
+/* we use this ethernet chip */
+#define CONFIG_ENC28J60
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index 8a6e5a6..712668a 100644
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -200,17 +200,17 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133		/* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
-#if defined(CFG_IPBSPEED_133)
+#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
 /*
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
- * been tested with a IPB Bus Clock of 66 MHz.
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
-#define CFG_PCISPEED_66			/* define for 66MHz speed */
+#define CFG_PCICLK_EQUALS_IPBCLK_DIV2		/* define for 66MHz speed */
 #endif
 
 /*
@@ -432,7 +432,7 @@
 
 #define CFG_BOOTCS_START	CFG_FLASH_BASE
 #define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#ifdef CFG_PCISPEED_66
+#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
 #define CFG_BOOTCS_CFG		0x0008DF30 /* for pci_clk  = 66 MHz */
 #else
 #define CFG_BOOTCS_CFG		0x0004DF30 /* for pci_clk = 33 MHz */
diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h
index f41dbd0..1cc9ce9 100644
--- a/include/configs/TOP5200.h
+++ b/include/configs/TOP5200.h
@@ -186,7 +186,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBSPEED_133   		/* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK   		/* define for 133MHz speed */
 
 /*
  * I2C configuration
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 7069b35..9da1d88 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -234,6 +234,8 @@
 #ifndef CONFIG_CAM5200
 #define CUSTOM_ENV_SETTINGS						\
 	"bootfile=/tftpboot/tqm5200/uImage\0"				\
+	"bootfile_fdt=/tftpboot/tqm5200/uImage_fdt\0"			\
+	"fdt_file=/tftpboot/tqm5200/tqm5200.dtb\0"			\
 	"u-boot=/tftpboot/tqm5200/u-boot.bin\0"
 #else
 #define CUSTOM_ENV_SETTINGS 						\
@@ -243,6 +245,10 @@
 #endif
 
 #define CONFIG_EXTRA_ENV_SETTINGS					\
+	"console=ttyS0\0"						\
+	"kernel_addr=200000\0"						\
+	"fdt_addr=400000\0"						\
+	"hostname=tqm5200\0"						\
 	"netdev=eth0\0"							\
 	"rootpath=/opt/eldk/ppc_6xx\0"					\
 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
@@ -252,13 +258,17 @@
 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
 		":${hostname}:${netdev}:off panic=1\0"			\
 	"addcons=setenv bootargs ${bootargs} "				\
-		"console=ttyS0,${baudrate}\0"				\
+		"console=${console},${baudrate}\0"			\
 	"flash_self=run ramargs addip addcons;"				\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"flash_nfs=run nfsargs addip addcons;"				\
 		"bootm ${kernel_addr}\0"				\
-	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;"	\
-		"bootm\0"						\
+	"net_nfs=tftp ${kernel_addr} ${bootfile};"			\
+		"run nfsargs addip addcons;bootm\0"			\
+	"net_nfs_fdt=tftp ${kernel_addr} ${bootfile_fdt};"		\
+		"tftp ${fdt_addr} ${fdt_file};setenv console ttyPSC0;"	\
+		"run nfsargs addip addcons;"				\
+		"bootm ${kernel_addr} - ${fdt_addr}\0"			\
 	CUSTOM_ENV_SETTINGS						\
 	"load=tftp 200000 ${u-boot}\0"					\
 	ENV_UPDT							\
@@ -269,17 +279,17 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133		/* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
-#if defined(CFG_IPBSPEED_133) && !defined(CONFIG_CAM5200)
+#if defined(CFG_IPBCLK_EQUALS_XLBCLK) && !defined(CONFIG_CAM5200)
 /*
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
- * been tested with a IPB Bus Clock of 66 MHz.
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock of
+ * 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
-#define CFG_PCISPEED_66			/* define for 66MHz speed */
+#define CFG_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
 #endif
 
 /*
@@ -594,7 +604,7 @@
 
 #define CFG_BOOTCS_START	CFG_FLASH_BASE
 #define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#ifdef CFG_PCISPEED_66
+#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
 #define CFG_BOOTCS_CFG		0x0008DF30 /* for pci_clk  = 66 MHz */
 #else
 #define CFG_BOOTCS_CFG		0x0004DF30 /* for pci_clk = 33 MHz */
@@ -676,4 +686,18 @@
 /* Interval between registers						     */
 #define CFG_ATA_STRIDE		4
 
+/*-----------------------------------------------------------------------
+ * Open firmware flat tree support
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+#define OF_CPU			"PowerPC,5200@0"
+#define OF_SOC			"soc5200@f0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH		"/soc5200@f0000000/serial@2000"
+
 #endif /* __CONFIG_H */
diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index 8175703..d8686dd 100644
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -183,7 +183,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBSPEED_133   		/* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK   		/* define for 133MHz speed */
 #endif
 
 /*
diff --git a/include/configs/acadia.h b/include/configs/acadia.h
index 35b6a51..0f447b0 100644
--- a/include/configs/acadia.h
+++ b/include/configs/acadia.h
@@ -34,7 +34,9 @@
 #define CONFIG_ACADIA		1		/* Board is Acadia	*/
 #define CONFIG_4xx		1		/* ... PPC4xx family	*/
 #define CONFIG_405EZ		1		/* Specifc 405EZ support*/
-#define CONFIG_SYS_CLK_FREQ	66666666	/* external freq to pll	*/
+/* Detect Acadia PLL input clock automatically via CPLD bit		*/
+#define CONFIG_SYS_CLK_FREQ    ((in8(CFG_CPLD_BASE + 0) == 0x0c) ? \
+				66666666 : 33333000)
 
 #define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_early_init_f */
 #define CONFIG_MISC_INIT_F	1		/* Call misc_init_f	*/
@@ -107,6 +109,7 @@
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
 #define CFG_FLASH_CFI			/* The flash is CFI compatible	*/
 #define CFG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
 
@@ -120,6 +123,12 @@
 #define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
 #define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
+#define	_CFG_CMD_INCLUDE	(CFG_CMD_ALL)
+#else
+#define	CFG_NO_FLASH		1	/* No NOR on Acadia when NAND-booting	*/
+#define	_CFG_CMD_INCLUDE	((CFG_CMD_ALL) & ~(CFG_CMD_FLASH | CFG_CMD_IMLS))
+#endif
+
 #ifdef CFG_ENV_IS_IN_FLASH
 #define CFG_ENV_SECT_SIZE	0x40000 /* size of one complete sector	*/
 #define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
@@ -130,6 +139,63 @@
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 #endif
 
+/*
+ * IPL (Initial Program Loader, integrated inside CPU)
+ * Will load first 4k from NAND (SPL) into cache and execute it from there.
+ *
+ * SPL (Secondary Program Loader)
+ * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
+ * has to fit into 4kByte. It sets up the CPU and configures the SDRAM
+ * controller and the NAND controller so that the special U-Boot image can be
+ * loaded from NAND to SDRAM.
+ *
+ * NUB (NAND U-Boot)
+ * This NAND U-Boot (NUB) is a special U-Boot version which can be started
+ * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
+ *
+ * On 440EPx the SPL is copied to SDRAM before the NAND controller is
+ * set up. While still running from cache, I experienced problems accessing
+ * the NAND controller.	sr - 2006-08-25
+ */
+#define CFG_NAND_BOOT_SPL_SRC	0xfffff000	/* SPL location			*/
+#define CFG_NAND_BOOT_SPL_SIZE	(4 << 10)	/* SPL size			*/
+#define CFG_NAND_BOOT_SPL_DST	(CFG_OCM_DATA_ADDR + (12 << 10)) /* Copy SPL here*/
+#define CFG_NAND_U_BOOT_DST	0x01000000	/* Load NUB to this addr	*/
+#define CFG_NAND_U_BOOT_START	CFG_NAND_U_BOOT_DST /* Start NUB from this addr	*/
+#define CFG_NAND_BOOT_SPL_DELTA	(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)
+
+/*
+ * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
+ */
+#define CFG_NAND_U_BOOT_OFFS	(16 << 10)	/* Offset to RAM U-Boot image	*/
+#define CFG_NAND_U_BOOT_SIZE	(384 << 10)	/* Size of RAM U-Boot image	*/
+
+/*
+ * Now the NAND chip has to be defined (no autodetection used!)
+ */
+#define CFG_NAND_PAGE_SIZE	512		/* NAND chip page size		*/
+#define CFG_NAND_BLOCK_SIZE	(16 << 10)	/* NAND chip block size		*/
+#define CFG_NAND_PAGE_COUNT	32		/* NAND chip page count		*/
+#define CFG_NAND_BAD_BLOCK_POS	5		/* Location of bad block marker	*/
+#undef CFG_NAND_4_ADDR_CYCLE			/* No fourth addr used (<=32MB)	*/
+
+#define CFG_NAND_ECCSIZE	256
+#define CFG_NAND_ECCBYTES	3
+#define CFG_NAND_ECCSTEPS	(CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE)
+#define CFG_NAND_OOBSIZE	16
+#define CFG_NAND_ECCTOTAL	(CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
+#define CFG_NAND_ECCPOS		{0, 1, 2, 3, 6, 7}
+
+#ifdef CFG_ENV_IS_IN_NAND
+/*
+ * For NAND booting the environment is embedded in the U-Boot image. Please take
+ * look at the file board/amcc/sequoia/u-boot-nand.lds for details.
+ */
+#define CFG_ENV_SIZE		CFG_NAND_BLOCK_SIZE
+#define CFG_ENV_OFFSET		(CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE)
+#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET + CFG_ENV_SIZE)
+#endif
+
 /*-----------------------------------------------------------------------
  * RAM (CRAM)
  *----------------------------------------------------------------------*/
@@ -207,7 +273,11 @@
 	"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;"	\
 		"cp.b ${fileaddr} fffc0000 ${filesize};"		\
 		"setenv filesize;saveenv\0"				\
-	"upd=run load;run update\0"					\
+	"upd=run load update\0"						\
+	"nload=tftp 200000 acadia/u-boot-nand.bin\0"			\
+	"nupdate=nand erase 0 60000;nand write 200000 0 60000;"		\
+		"setenv filesize;saveenv\0"				\
+	"nupd=run nload nupdate\0"					\
 	"kozio=bootm ffc60000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
@@ -224,16 +294,6 @@
 #define CONFIG_USB_OHCI
 #define CONFIG_USB_STORAGE
 
-#if 0 /* test-only */
-#define TEST_ONLY_NAND
-#endif
-
-#ifdef TEST_ONLY_NAND
-#define CMD_NAND		CFG_CMD_NAND
-#else
-#define CMD_NAND		0
-#endif
-
 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -241,24 +301,24 @@
 
 #define CONFIG_SUPPORT_VFAT
 
-#define CONFIG_COMMANDS       (CONFIG_CMD_DFL	|	\
-			       CFG_CMD_ASKENV	|	\
-			       CFG_CMD_DHCP	|	\
-			       CFG_CMD_DTT	|	\
-			       CFG_CMD_DIAG	|	\
-			       CFG_CMD_EEPROM	|	\
-			       CFG_CMD_ELF	|	\
-			       CFG_CMD_FAT	|	\
-			       CFG_CMD_I2C	|	\
-			       CFG_CMD_IRQ	|	\
-			       CFG_CMD_MII	|	\
-			       CMD_NAND		|	\
-			       CFG_CMD_NET	|	\
-			       CFG_CMD_NFS	|	\
-			       CFG_CMD_PCI	|	\
-			       CFG_CMD_PING	|	\
-			       CFG_CMD_REGINFO	|	\
-			       CFG_CMD_USB)
+#define CONFIG_COMMANDS	((CONFIG_CMD_DFL & _CFG_CMD_INCLUDE)	|	\
+			 CFG_CMD_ASKENV	|				\
+			 CFG_CMD_DHCP	|				\
+			 CFG_CMD_DTT	|				\
+			 CFG_CMD_DIAG	|				\
+			 CFG_CMD_EEPROM	|				\
+			 CFG_CMD_ELF	|				\
+			 CFG_CMD_FAT	|				\
+			 CFG_CMD_I2C	|				\
+			 CFG_CMD_IRQ	|				\
+			 CFG_CMD_MII	|				\
+			 CFG_CMD_NAND	|				\
+			 CFG_CMD_NET	|				\
+			 CFG_CMD_NFS	|				\
+			 CFG_CMD_PCI	|				\
+			 CFG_CMD_PING	|				\
+			 CFG_CMD_REGINFO |				\
+			 CFG_CMD_USB)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
@@ -300,7 +360,6 @@
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-#ifdef TEST_ONLY_NAND
 /*-----------------------------------------------------------------------
  * NAND FLASH
  *----------------------------------------------------------------------*/
@@ -308,7 +367,6 @@
 #define NAND_MAX_CHIPS		1
 #define CFG_NAND_BASE		(CFG_NAND_ADDR + CFG_NAND_CS)
 #define CFG_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/
-#endif
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
@@ -322,12 +380,16 @@
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  *----------------------------------------------------------------------*/
-#define CFG_NAND_CS		0		/* NAND chip connected to CSx	*/
-
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CFG_NAND_CS		3
 /* Memory Bank 0 (Flash) initialization						*/
 #define CFG_EBC_PB0AP		0x03337200
 #define CFG_EBC_PB0CR		0xfe0bc000
 
+/* Memory Bank 3 (NAND-FLASH) initialization					*/
+#define CFG_EBC_PB3AP		0x018003c0
+#define CFG_EBC_PB3CR		(CFG_NAND_ADDR | 0x1c000)
+
 /* Just initial configuration for CRAM. Will be changed in memory.c to sync mode*/
 /* Memory Bank 1 (CRAM) initialization						*/
 #define CFG_EBC_PB1AP		0x030400c0
@@ -336,10 +398,24 @@
 /* Memory Bank 2 (CRAM) initialization						*/
 #define CFG_EBC_PB2AP		0x030400c0
 #define CFG_EBC_PB2CR		0x020bc000
+#else
+#define CFG_NAND_CS		0		/* NAND chip connected to CSx	*/
+/* Memory Bank 0 (NAND-FLASH) initialization					*/
+#define CFG_EBC_PB0AP		0x018003c0
+#define CFG_EBC_PB0CR		(CFG_NAND_ADDR | 0x1c000)
 
-/* Memory Bank 3 (NAND-FLASH) initialization					*/
-#define CFG_EBC_PB3AP		0x018003c0
-#define CFG_EBC_PB3CR		(CFG_NAND_ADDR | 0x1c000)
+/*
+ * When NAND-booting the CRAM EBC setup must be done in sync mode, since the
+ * NAND-SPL already initialized the CRAM and EBC to sync mode.
+ */
+/* Memory Bank 1 (CRAM) initialization						*/
+#define CFG_EBC_PB1AP		0x9C0201C0
+#define CFG_EBC_PB1CR		0x000bc000
+
+/* Memory Bank 2 (CRAM) initialization						*/
+#define CFG_EBC_PB2AP		0x9C0201C0
+#define CFG_EBC_PB2CR		0x020bc000
+#endif
 
 /* Memory Bank 4 (CPLD) initialization						*/
 #define CFG_EBC_PB4AP		0x04006000
@@ -351,14 +427,15 @@
  * GPIO Setup
  *----------------------------------------------------------------------*/
 #define CFG_GPIO_CRAM_CLK	8
-#define CFG_GPIO_CRAM_WAIT	9
+#define CFG_GPIO_CRAM_WAIT	9		/* GPIO-In		*/
 #define CFG_GPIO_CRAM_ADV	10
-#define CFG_GPIO_CRAM_CRE	(32 + 21)
+#define CFG_GPIO_CRAM_CRE	(32 + 21)	/* GPIO-Out		*/
 
 /*-----------------------------------------------------------------------
  * Definitions for GPIO_0 setup (PPC405EZ specific)
  *
- * GPIO0[0-3]	- External Bus Controller CS_4 - CS_7 Outputs
+ * GPIO0[0-2]	- External Bus Controller CS_4 - CS_6 Outputs
+ * GPIO0[3]	- NAND FLASH Controller CE3 (NFCE3) Output
  * GPIO0[4]	- External Bus Controller Hold Input
  * GPIO0[5]	- External Bus Controller Priority Input
  * GPIO0[6]	- External Bus Controller HLDA Output
@@ -374,12 +451,12 @@
  * GPIO0[28-30]	- Trace Outputs / PWM Inputs
  * GPIO0[31]	- PWM_8 I/O
  */
-#define CFG_GPIO0_TCR		0xC0000000
-#define CFG_GPIO0_OSRL		0x50000000
-#define CFG_GPIO0_OSRH		0x00000055
-#define CFG_GPIO0_ISR1L		0x00000000
+#define CFG_GPIO0_TCR		0xC0A00000
+#define CFG_GPIO0_OSRL		0x50004400
+#define CFG_GPIO0_OSRH		0x02000055
+#define CFG_GPIO0_ISR1L		0x00001000
 #define CFG_GPIO0_ISR1H		0x00000055
-#define CFG_GPIO0_TSRL		0x00000000
+#define CFG_GPIO0_TSRL		0x02000000
 #define CFG_GPIO0_TSRH		0x00000055
 
 /*-----------------------------------------------------------------------
@@ -396,13 +473,13 @@
  * GPIO1[16]	- SPI_SS_1_N Output
  * GPIO1[17-20]	- Trace Output/External Interrupts IRQ0 - IRQ3 inputs
  */
-#define CFG_GPIO1_OSRH		0x55455555
+#define CFG_GPIO1_TCR		0xFFFF8414
 #define CFG_GPIO1_OSRL		0x40000110
-#define CFG_GPIO1_ISR1H		0x00000000
+#define CFG_GPIO1_OSRH		0x55455555
 #define CFG_GPIO1_ISR1L		0x15555445
-#define CFG_GPIO1_TSRH		0x00000000
+#define CFG_GPIO1_ISR1H		0x00000000
 #define CFG_GPIO1_TSRL		0x00000000
-#define CFG_GPIO1_TCR		0xFFFF8014
+#define CFG_GPIO1_TSRH		0x00000000
 
 /*
  * Internal Definitions
diff --git a/include/configs/aev.h b/include/configs/aev.h
index 8d9f0a1..f6f530c 100644
--- a/include/configs/aev.h
+++ b/include/configs/aev.h
@@ -166,17 +166,17 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133		/* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
-#if defined(CFG_IPBSPEED_133)
+#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
 /*
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
- * been tested with a IPB Bus Clock of 66 MHz.
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
-#define CFG_PCISPEED_66			/* define for 66MHz speed */
+#define CFG_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
 #endif
 
 /*
@@ -362,7 +362,7 @@
 
 #define CFG_BOOTCS_START	CFG_FLASH_BASE
 #define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#ifdef CFG_PCISPEED_66
+#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
 #define CFG_BOOTCS_CFG		0x0008DF30 /* for pci_clk  = 66 MHz */
 #else
 #define CFG_BOOTCS_CFG		0x0004DF30 /* for pci_clk = 33 MHz */
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index bcc736c..763d1c7 100644
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2005-2006
+ * (C) Copyright 2005-2007
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -43,7 +43,6 @@
  * 2nd ethernet port you have to "undef" the following define.
  */
 #define CONFIG_BAMBOO_NAND      1       /* enable nand flash support    */
-#define CFG_NAND_LEGACY
 
 /*-----------------------------------------------------------------------
  * Base addresses -- Note these are effective addresses where the
@@ -51,7 +50,7 @@
  *----------------------------------------------------------------------*/
 #define CFG_MONITOR_LEN		(384 * 1024)	/* Reserve 384 kB for Monitor	*/
 #define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
-#define CFG_MONITOR_BASE	(-CFG_MONITOR_LEN)
+#define CFG_MONITOR_BASE	TEXT_BASE
 #define CFG_SDRAM_BASE	        0x00000000	    /* _must_ be 0	*/
 #define CFG_FLASH_BASE	        0xfff00000	    /* start of FLASH	*/
 #define CFG_PCI_MEMBASE	        0xa0000000	    /* mapped pci memory*/
@@ -105,14 +104,11 @@
 /*-----------------------------------------------------------------------
  * Environment
  *----------------------------------------------------------------------*/
-/*
- * Define here the location of the environment variables (FLASH or EEPROM).
- * Note: DENX encourages to use redundant environment in FLASH.
- */
-#if 1
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
 #define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 #else
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars	*/
+#define CFG_ENV_IS_IN_NAND	1	/* use NAND for environment vars	*/
+#define CFG_ENV_IS_EMBEDDED	1	/* use embedded environment */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -134,7 +130,7 @@
 
 #ifdef CFG_ENV_IS_IN_FLASH
 #define CFG_ENV_SECT_SIZE	0x10000 	/* size of one complete sector	*/
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR		((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
 #define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
@@ -142,66 +138,80 @@
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 #endif /* CFG_ENV_IS_IN_FLASH */
 
+/*
+ * IPL (Initial Program Loader, integrated inside CPU)
+ * Will load first 4k from NAND (SPL) into cache and execute it from there.
+ *
+ * SPL (Secondary Program Loader)
+ * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
+ * has to fit into 4kByte. It sets up the CPU and configures the SDRAM
+ * controller and the NAND controller so that the special U-Boot image can be
+ * loaded from NAND to SDRAM.
+ *
+ * NUB (NAND U-Boot)
+ * This NAND U-Boot (NUB) is a special U-Boot version which can be started
+ * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
+ *
+ * On 440EPx the SPL is copied to SDRAM before the NAND controller is
+ * set up. While still running from cache, I experienced problems accessing
+ * the NAND controller.	sr - 2006-08-25
+ */
+#define CFG_NAND_BOOT_SPL_SRC	0xfffff000	/* SPL location			*/
+#define CFG_NAND_BOOT_SPL_SIZE	(4 << 10)	/* SPL size			*/
+#define CFG_NAND_BOOT_SPL_DST	0x00800000	/* Copy SPL here		*/
+#define CFG_NAND_U_BOOT_DST	0x01000000	/* Load NUB to this addr	*/
+#define CFG_NAND_U_BOOT_START	CFG_NAND_U_BOOT_DST /* Start NUB from this addr	*/
+#define CFG_NAND_BOOT_SPL_DELTA	(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)
+
+/*
+ * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
+ */
+#define CFG_NAND_U_BOOT_OFFS	(16 << 10)	/* Offset to RAM U-Boot image	*/
+#define CFG_NAND_U_BOOT_SIZE	(384 << 10)	/* Size of RAM U-Boot image	*/
+
+/*
+ * Now the NAND chip has to be defined (no autodetection used!)
+ */
+#define CFG_NAND_PAGE_SIZE	512		/* NAND chip page size		*/
+#define CFG_NAND_BLOCK_SIZE	(16 << 10)	/* NAND chip block size		*/
+#define CFG_NAND_PAGE_COUNT	32		/* NAND chip page count		*/
+#define CFG_NAND_BAD_BLOCK_POS	5		/* Location of bad block marker	*/
+#define CFG_NAND_4_ADDR_CYCLE	1		/* Fourth addr used (>32MB)	*/
+
+#define CFG_NAND_ECCSIZE	256
+#define CFG_NAND_ECCBYTES	3
+#define CFG_NAND_ECCSTEPS	(CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE)
+#define CFG_NAND_OOBSIZE	16
+#define CFG_NAND_ECCTOTAL	(CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
+#define CFG_NAND_ECCPOS		{0, 1, 2, 3, 6, 7}
+
+#ifdef CFG_ENV_IS_IN_NAND
+/*
+ * For NAND booting the environment is embedded in the U-Boot image. Please take
+ * look at the file board/amcc/sequoia/u-boot-nand.lds for details.
+ */
+#define CFG_ENV_SIZE		CFG_NAND_BLOCK_SIZE
+#define CFG_ENV_OFFSET		(CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE)
+#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET + CFG_ENV_SIZE)
+#endif
+
 /*-----------------------------------------------------------------------
- * NAND-FLASH related
+ * NAND FLASH
  *----------------------------------------------------------------------*/
-#define NAND_CMD_REG   (0x00) /* NandFlash Command Register */
-#define NAND_ADDR_REG  (0x04) /* NandFlash Address Register */
-#define NAND_DATA_REG  (0x08) /* NandFlash Data Register */
-#define NAND_ECC0_REG  (0x10) /* NandFlash ECC Register0 */
-#define NAND_ECC1_REG  (0x14) /* NandFlash ECC Register1 */
-#define NAND_ECC2_REG  (0x18) /* NandFlash ECC Register2 */
-#define NAND_ECC3_REG  (0x1C) /* NandFlash ECC Register3 */
-#define NAND_ECC4_REG  (0x20) /* NandFlash ECC Register4 */
-#define NAND_ECC5_REG  (0x24) /* NandFlash ECC Register5 */
-#define NAND_ECC6_REG  (0x28) /* NandFlash ECC Register6 */
-#define NAND_ECC7_REG  (0x2C) /* NandFlash ECC Register7 */
-#define NAND_CR0_REG   (0x30) /* NandFlash Device Bank0 Config Register */
-#define NAND_CR1_REG   (0x34) /* NandFlash Device Bank1 Config Register */
-#define NAND_CR2_REG   (0x38) /* NandFlash Device Bank2 Config Register */
-#define NAND_CR3_REG   (0x3C) /* NandFlash Device Bank3 Config Register */
-#define NAND_CCR_REG   (0x40) /* NandFlash Core Configuration Register */
-#define NAND_STAT_REG  (0x44) /* NandFlash Device Status Register */
-#define NAND_HWCTL_REG (0x48) /* NandFlash Direct Hwd Control Register */
-#define NAND_REVID_REG (0x50) /* NandFlash Core Revision Id Register */
-
-/* Nand Flash K9F1208U0A Command Set => Nand Flash 0 */
-#define NAND0_CMD_READ1_HALF1     0x00     /* Starting addr for 1rst half of registers */
-#define NAND0_CMD_READ1_HALF2     0x01     /* Starting addr for 2nd half of registers */
-#define NAND0_CMD_READ2           0x50
-#define NAND0_CMD_READ_ID         0x90
-#define NAND0_CMD_READ_STATUS     0x70
-#define NAND0_CMD_RESET           0xFF
-#define NAND0_CMD_PAGE_PROG       0x80
-#define NAND0_CMD_PAGE_PROG_TRUE  0x10
-#define NAND0_CMD_PAGE_PROG_DUMMY 0x11
-#define NAND0_CMD_BLOCK_ERASE     0x60
-#define NAND0_CMD_BLOCK_ERASE_END 0xD0
-
-#define CFG_MAX_NAND_DEVICE     1	/* Max number of NAND devices */
-#define SECTORSIZE              512
-
-#define ADDR_COLUMN             1
-#define ADDR_PAGE               2
-#define ADDR_COLUMN_PAGE        3
-
-#define NAND_ChipID_UNKNOWN     0x00
-#define NAND_MAX_FLOORS         1
-#define NAND_MAX_CHIPS          1
-
-#define WRITE_NAND_COMMAND(d, adr) do {*(volatile u8 *)((ulong)adr+NAND_CMD_REG) = d;} while(0)
-#define WRITE_NAND_ADDRESS(d, adr) do {*(volatile u8 *)((ulong)adr+NAND_ADDR_REG) = d;} while(0)
-#define WRITE_NAND(d, adr)      do {*(volatile u8 *)((ulong)adr+NAND_DATA_REG) = d;} while(0)
-#define READ_NAND(adr)          (*(volatile u8 *)((ulong)adr+NAND_DATA_REG))
-#define NAND_WAIT_READY(nand)   while (!(*(volatile u8 *)((ulong)nand->IO_ADDR+NAND_STAT_REG) & 0x01))
-
-/* not needed with 440EP NAND controller */
-#define NAND_CTL_CLRALE(nandptr)
-#define NAND_CTL_SETALE(nandptr)
-#define NAND_CTL_CLRCLE(nandptr)
-#define NAND_CTL_SETCLE(nandptr)
-#define NAND_DISABLE_CE(nand)
-#define NAND_ENABLE_CE(nand)
+#define CFG_MAX_NAND_DEVICE	2
+#define NAND_MAX_CHIPS		CFG_MAX_NAND_DEVICE
+#define CFG_NAND_BASE		(CFG_NAND_ADDR + CFG_NAND_CS)
+#define CFG_NAND_BASE_LIST	{ CFG_NAND_BASE, CFG_NAND_ADDR + 2 }
+#define CFG_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/
+
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CFG_NAND_CS		1
+#else
+#define CFG_NAND_CS		0		/* NAND chip connected to CSx	*/
+/* Memory Bank 0 (NAND-FLASH) initialization					*/
+#define CFG_EBC_PB0AP		0x018003c0
+#define CFG_EBC_PB0CR		(CFG_NAND_ADDR | 0x1c000)
+#endif
 
 /*-----------------------------------------------------------------------
  * DDR SDRAM
@@ -209,7 +219,8 @@
 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for setup             */
 #undef CONFIG_DDR_ECC			/* don't use ECC			*/
 #define CFG_SIMULATE_SPD_EEPROM	0xff	/* simulate spd eeprom on this address	*/
-#define SPD_EEPROM_ADDRESS      {CFG_SIMULATE_SPD_EEPROM, 0x50, 0x51}
+#define SPD_EEPROM_ADDRESS	{CFG_SIMULATE_SPD_EEPROM, 0x50, 0x51}
+#define CFG_MBYTES_SDRAM	(64)	/* 64MB fixed size for early-sdram-init */
 
 /*-----------------------------------------------------------------------
  * I2C
diff --git a/include/configs/canmb.h b/include/configs/canmb.h
index 2c160a4..ec6d57e 100644
--- a/include/configs/canmb.h
+++ b/include/configs/canmb.h
@@ -111,7 +111,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBSPEED_133   		/* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK   		/* define for 133MHz speed */
 
 /*
  * Flash configuration, expect one 16 Megabyte Bank at most
diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h
index f9586fb..f5efcd9 100644
--- a/include/configs/cpci5200.h
+++ b/include/configs/cpci5200.h
@@ -179,7 +179,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBSPEED_133		/* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 #endif
 /*
  * I2C configuration
diff --git a/include/configs/delta.h b/include/configs/delta.h
index 91284fd..1568120 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -188,7 +188,6 @@
 /*
  * NAND Flash
  */
-/* Use the new NAND code. (BOARDLIBS = drivers/nand/libnand.a required) */
 #undef CFG_NAND_LEGACY
 
 #define CFG_NAND0_BASE		0x0 /* 0x43100040 */ /* 0x10000000 */
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index 095b5f6..4d813d8 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -110,7 +110,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBSPEED_133		/* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
 /*
  * I2C configuration
diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h
index 773d5d2..ad3cf06 100644
--- a/include/configs/inka4x0.h
+++ b/include/configs/inka4x0.h
@@ -147,7 +147,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133		/* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
 /*
  * Flash configuration
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index 7f55366..cc47a16 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -360,7 +360,19 @@
 				 EBC_BXCR_BW_16BIT)
 
 /* Memory Bank 1 (Xilinx System ACE controller) initialization		*/
-#define CFG_EBC_PB1AP		0x7F8FFE80
+#define CFG_EBC_PB1AP		(EBC_BXAP_BME_DISABLED      |		\
+				 EBC_BXAP_TWT_ENCODE(4)     |		\
+				 EBC_BXAP_BCE_DISABLE       |		\
+				 EBC_BXAP_BCT_2TRANS        |		\
+				 EBC_BXAP_CSN_ENCODE(0)     |		\
+				 EBC_BXAP_OEN_ENCODE(0)     |		\
+				 EBC_BXAP_WBN_ENCODE(0)     |		\
+				 EBC_BXAP_WBF_ENCODE(0)     |		\
+				 EBC_BXAP_TH_ENCODE(0)      |		\
+				 EBC_BXAP_RE_DISABLED       |		\
+				 EBC_BXAP_SOR_NONDELAYED    |		\
+				 EBC_BXAP_BEM_WRITEONLY     |		\
+				 EBC_BXAP_PEN_DISABLED)
 #define CFG_EBC_PB1CR		(EBC_BXCR_BAS_ENCODE(CFG_ACE_BASE)  |	\
 				 EBC_BXCR_BS_1MB                    |	\
 				 EBC_BXCR_BU_RW                     |	\
diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h
index 7e51523..7b6c695 100644..100755
--- a/include/configs/lpc2292sodimm.h
+++ b/include/configs/lpc2292sodimm.h
@@ -1,12 +1,8 @@
 /*
- * (C) Copyright 2000
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * Configuation settings for the EP7312 board.
- *
- * Modified to work on Armadillo HT1070 ARM720T board
- * (C) Copyright 2005 Rowel Atienza rowel@diwalabs.com
+ * Configuation settings for the LPC2292SODIMM board from Embedded Artists.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -31,7 +27,7 @@
 #define __CONFIG_H
 
 /*
- * If we are developing, we might want to start armboot from ram
+ * If we are developing, we might want to start u-boot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
 #undef CONFIG_INIT_CRITICAL		/* undef for developing */
@@ -46,7 +42,7 @@
 #define CONFIG_ARM7		1	/* This is a ARM7 CPU	*/
 #define CONFIG_ARM_THUMB	1	/* this is an ARM720TDMI */
 #define CONFIG_LPC2292
-#undef  CONFIG_ARM7_REVD	 	/* disable ARM720 REV.D Workarounds */
+#undef	CONFIG_ARM7_REVD		/* disable ARM720 REV.D Workarounds */
 
 #undef CONFIG_USE_IRQ			/* don't need them anymore */
 
@@ -70,7 +66,7 @@
 
 #define CONFIG_BAUDRATE		115200
 
-#define CONFIG_BOOTP_MASK       (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
 
 /*
  * Supported commands
@@ -103,11 +99,12 @@
 #define CFG_MEMTEST_START	0x40000000	/* memtest works on	*/
 #define CFG_MEMTEST_END		0x40000000	/* 4 ... 8 MB in DRAM	*/
 
-#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define	CFG_LOAD_ADDR		0x00040000	/* default load address	for armadillo: kernel img is here*/
+#define	CFG_LOAD_ADDR		0x00040000	/* default load address	for	*/
+						/* armadillo: kernel img is here*/
 
-#define CFG_SYS_CLK_FREQ        58982400        /* Hz */
+#define CFG_SYS_CLK_FREQ	58982400	/* Hz */
 #define	CFG_HZ			2048		/* decrementer freq in Hz */
 
 						/* valid baudrates */
@@ -154,5 +151,7 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_MMC 1
+/* we use this ethernet chip */
+#define CONFIG_ENC28J60
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/luan.h b/include/configs/luan.h
index 9c8769b..045a144 100644
--- a/include/configs/luan.h
+++ b/include/configs/luan.h
@@ -135,7 +135,8 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_SPD_EEPROM	1	/* Use SPD EEPROM for setup	*/
 #define SPD_EEPROM_ADDRESS	{0x53, 0x52}	/* SPD i2c spd addresses*/
-#undef CONFIG_DDR_ECC			/* no ECC support for now	*/
+#define CONFIG_DDR_ECC		1	/* with ECC support		*/
+#define CFG_44x_DDR2_CKTR_180	1	/* use 180 deg advance		*/
 
 /*-----------------------------------------------------------------------
  * I2C
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index 621a81c..c2324a0 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -169,7 +169,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133		/* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
 /*
  * I2C configuration
diff --git a/include/configs/ml401.h b/include/configs/ml401.h
index cb159e7..3db2877 100644
--- a/include/configs/ml401.h
+++ b/include/configs/ml401.h
@@ -28,6 +28,7 @@
 #include "../board/xilinx/ml401/xparameters.h"
 
 #define	CONFIG_MICROBLAZE	1	/* MicroBlaze CPU */
+#define	MICROBLAZE_V5		1
 #define	CONFIG_ML401		1	/* ML401 Board */
 
 /* uart */
@@ -36,11 +37,11 @@
 #define	CFG_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
 
 /* setting reset address */
-#define	CFG_RESET_ADDRESS	TEXT_BASE
+/*#define	CFG_RESET_ADDRESS	TEXT_BASE*/
 
 /* ethernet */
 #define CONFIG_EMACLITE		1
-#define XPAR_EMAC_0_DEVICE_ID	XPAR_XEMAC_NUM_INSTANCES
+#define XPAR_EMAC_0_DEVICE_ID	XPAR_OPB_ETHERNET_0_DEVICE_ID
 
 /* gpio */
 #define	CFG_GPIO_0		1
@@ -58,6 +59,10 @@
 #define	FREQUENCE		XILINX_CLOCK_FREQ
 #define	CFG_TIMER_0_PRELOAD	( FREQUENCE/1000 )
 
+/* FSL */
+#define	CFG_FSL_2
+#define	FSL_INTR_2	1
+
 /*
  * memory layout - Example
  * TEXT_BASE = 0x1200_0000;
@@ -93,7 +98,8 @@
 
 /* global pointer */
 #define	CFG_GBL_DATA_SIZE	0x1000	/* size of global data */
-#define	CFG_GBL_DATA_OFFSET     (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* start of global data */
+/* start of global data */
+#define	CFG_GBL_DATA_OFFSET     (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
 
 /* monitor code */
 #define	SIZE			0x40000
@@ -117,6 +123,7 @@
 	#define	CFG_FLASH_EMPTY_INFO	1	/* ?empty sector */
 	#define	CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
 	#define	CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip */
+	#define	CFG_FLASH_PROTECTION		/* hardware flash protection */
 
 	#ifdef	RAMENV
 		#define	CFG_ENV_IS_NOWHERE	1
@@ -135,6 +142,7 @@
 	#define	CFG_ENV_IS_NOWHERE	1
 	#define	CFG_ENV_SIZE		0x1000
 	#define	CFG_ENV_ADDR		(CFG_MONITOR_BASE - CFG_ENV_SIZE)
+	#define	CFG_FLASH_PROTECTION		/* hardware flash protection */
 #endif /* !FLASH */
 
 #ifdef	FLASH
@@ -152,8 +160,13 @@
 				CFG_CMD_IMI |\
 				CFG_CMD_NET |\
 				CFG_CMD_CACHE |\
+				CFG_CMD_FAT |\
+				CFG_CMD_EXT2 |\
+				CFG_CMD_JFFS2 |\
+				CFG_CMD_ECHO |\
 				CFG_CMD_IMLS |\
 				CFG_CMD_FLASH |\
+				CFG_CMD_MFSL |\
 				CFG_CMD_PING \
 				)
 	#else	/* !RAMENV */
@@ -174,6 +187,11 @@
 				CFG_CMD_FLASH |\
 				CFG_CMD_PING |\
 				CFG_CMD_ENV |\
+				CFG_CMD_FAT |\
+				CFG_CMD_EXT2 |\
+				CFG_CMD_JFFS2 |\
+				CFG_CMD_ECHO |\
+				CFG_CMD_MFSL |\
 				CFG_CMD_SAVES \
 				)
 
@@ -189,16 +207,30 @@
 				CFG_CMD_BDI |\
 				CFG_CMD_RUN |\
 				CFG_CMD_LOADS |\
+				CFG_CMD_FAT |\
+				CFG_CMD_EXT2 |\
 				CFG_CMD_LOADB |\
 				CFG_CMD_IMI |\
 				CFG_CMD_NET |\
 				CFG_CMD_CACHE |\
+				CFG_CMD_MFSL |\
 				CFG_CMD_PING \
 				)
 #endif	/* !FLASH */
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 
+#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+/* JFFS2 partitions */
+#define CONFIG_JFFS2_CMDLINE	/* mtdparts command line support */
+#define MTDIDS_DEFAULT		"nor0=ml401-0"
+
+/* default mtd partition table */
+#define MTDPARTS_DEFAULT	"mtdparts=ml401-0:256k(u-boot),"\
+				"256k(env),3m(kernel),1m(romfs),"\
+				"1m(cramfs),-(jffs2)"
+#endif
+
 /* Miscellaneous configurable options */
 #define	CFG_PROMPT	"U-Boot-mONStR> "
 #define	CFG_CBSIZE	512	/* size of console buffer */
@@ -207,7 +239,7 @@
 #define	CFG_LONGHELP
 #define	CFG_LOAD_ADDR	0x12000000 /* default load address */
 
-#define	CONFIG_BOOTDELAY 	30
+#define	CONFIG_BOOTDELAY	30
 #define	CONFIG_BOOTARGS		"root=romfs"
 #define	CONFIG_HOSTNAME		"ml401"
 #define	CONFIG_BOOTCOMMAND 	"base 0;tftp 11000000 image.img;bootm"
@@ -221,10 +253,19 @@
 #define CFG_HZ	1000
 
 /* system ace */
-/*#define CONFIG_SYSTEMACE
-#define DEBUG_SYSTEMACE
-#define CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
-#define CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
-#define CONFIG_DOS_PARTITION
-*/
+#define	CONFIG_SYSTEMACE
+/* #define DEBUG_SYSTEMACE */
+#define	SYSTEMACE_CONFIG_FPGA
+#define	CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
+#define	CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
+#define	CONFIG_DOS_PARTITION
+
+#define	CONFIG_PREBOOT		"echo U-BOOT for ML401;setenv preboot;echo"
+
+#define	CONFIG_EXTRA_ENV_SETTINGS	"unlock=yes\0" /* hardware flash protection */\
+					"nor0=ml401-0\0"\
+					"mtdparts=mtdparts=ml401-0:"\
+					"256k(u-boot),256k(env),3m(kernel),"\
+					"1m(romfs),1m(cramfs),-(jffs2)\0"
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index 5328e8d..e3899a5 100644
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -26,12 +26,10 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-
 /*
  * High Level Configuration Options
  */
 
-
 /* CPU and board */
 #define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
 #define CONFIG_MPC5200		1	/* More exactly a MPC5200 */
@@ -50,7 +48,14 @@
 				CFG_CMD_MII	| \
 				CFG_CMD_BEDBUG	| \
 				CFG_CMD_NET	| \
-				CFG_CMD_PING)
+				CFG_CMD_PING	| \
+				CFG_CMD_IDE	| \
+				CFG_CMD_FAT	| \
+				CFG_CMD_JFFS2	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_DATE	| \
+				CFG_CMD_EEPROM	| \
+				CFG_CMD_DTT)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
@@ -71,7 +76,7 @@
 #define CONFIG_MPC5xxx_FEC	1
 #define CONFIG_PHY_ADDR		0x2
 #define CONFIG_PHY_TYPE		0x79c874
-
+#define CONFIG_RESET_PHY_R	1
 
 /*
  * Autobooting
@@ -94,42 +99,51 @@
  * Default environment settings
  */
 #define CONFIG_EXTRA_ENV_SETTINGS					\
-	"sdram_test=0\0"						\
 	"netdev=eth0\0"							\
 	"hostname=motionpro\0"						\
 	"netmask=255.255.0.0\0"						\
 	"ipaddr=192.168.160.22\0"					\
 	"serverip=192.168.1.1\0"					\
 	"gatewayip=192.168.1.1\0"					\
-	"kernel_addr=200000\0"						\
+	"console=ttyPSC0,115200\0"					\
 	"u-boot_addr=100000\0"						\
-	"kernel_sector=20\0"						\
-	"kernel_size=1000\0"						\
-	"console=ttyS0,115200\0"					\
+	"kernel_addr=200000\0"						\
+	"fdt_addr=400000\0"						\
+	"ramdisk_addr=500000\0"						\
+	"multi_image_addr=800000\0"					\
 	"rootpath=/opt/eldk-4.1/ppc_6xx\0"				\
-	"bootfile=/tftpboot/motionpro/uImage\0"				\
 	"u-boot=/tftpboot/motionpro/u-boot.bin\0"			\
-	"load=tftp $(u-boot_addr) $(u-boot)\0"				\
+	"bootfile=/tftpboot/motionpro/uImage\0"				\
+	"fdt_file=/tftpboot/motionpro/motionpro.dtb\0"			\
+	"ramdisk_file=/tftpboot/motionpro/uRamdisk\0"			\
+	"multi_image_file=kernel+initrd+dtb.img\0"			\
+	"load=tftp ${u-boot_addr} ${u-boot}\0"				\
 	"update=prot off fff00000 fff3ffff; era fff00000 fff3ffff; "	\
-		"cp.b $(u-boot_addr) fff00000 $(filesize);"		\
+		"cp.b ${u-boot_addr} fff00000 ${filesize};"		\
 		"prot on fff00000 fff3ffff\0"				\
 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs $(bootargs) console=$(console) "		\
-		"ip=$(ipaddr):$(serverip):$(gatewayip):"		\
-		"$(netmask):$(hostname):$(netdev):off panic=1\0"	\
-	"flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0"		\
-	"flash_self=run ramargs addip;bootm $(kernel_addr) "		\
-		"$(ramdisk_addr)\0"					\
-	"net_nfs=tftp $(kernel_addr) $(bootfile); run nfsargs addip; "	\
-		"bootm $(kernel_addr)\0"				\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=$(serverip):$(rootpath)\0"			\
-	"fstype=ext3\0"							\
-	"fatargs=setenv bootargs init=/linuxrc rw\0"			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"fat_args=setenv bootargs rw\0"					\
+	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
+		"${netmask}:${hostname}:${netdev}:off panic=1 "		\
+		"console=${console}\0"					\
+	"net_nfs=tftp ${kernel_addr} ${bootfile}; "			\
+		"tftp ${fdt_addr} ${fdt_file}; run nfsargs addip; "	\
+		"bootm ${kernel_addr} - ${fdt_addr}\0"			\
+	"net_self=tftp ${kernel_addr} ${bootfile}; "			\
+		"tftp ${fdt_addr} ${fdt_file}; "			\
+		"tftp ${ramdisk_addr} ${ramdisk_file}; "		\
+		"run ramargs addip; "					\
+		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
+	"fat_multi=run fat_args addip; fatload ide 0:1 "		\
+		"${multi_image_addr} ${multi_image_file}; "		\
+		"bootm ${multi_image_addr}\0"				\
 	""
 #define CONFIG_BOOTCOMMAND	"run net_nfs"
 
-
 /*
  * do board-specific init
  */
@@ -148,6 +162,12 @@
 
 
 /*
+ * Set IPB speed to 100MHz
+ */
+#define CFG_IPBCLK_EQUALS_XLBCLK
+
+
+/*
  * Memory map
  */
 /*
@@ -243,6 +263,84 @@
 #define CFG_MAX_FLASH_SECT	256	/* max num of sects on one chip */
 #define CONFIG_FLASH_16BIT		/* Flash is 16-bit */
 
+/*
+ * MTD configuration
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=motionpro-0"
+#define MTDPARTS_DEFAULT	"mtdparts=motionpro-0:"			  \
+					"13m(fs),2m(kernel),256k(uboot)," \
+					"64k(env),64k(redund_env),64k(dtb)," \
+					"-(user_data)"
+
+/*
+ * IDE/ATA configuration
+ */
+#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+#define CFG_IDE_MAXBUS		1
+#define CFG_IDE_MAXDEVICE	1
+#define CONFIG_IDE_PREINIT
+
+#define CFG_ATA_DATA_OFFSET	0x0060
+#define CFG_ATA_REG_OFFSET	CFG_ATA_DATA_OFFSET
+#define CFG_ATA_STRIDE		4
+#define CONFIG_DOS_PARTITION
+
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
+#define CFG_I2C_MODULE		2	/* select I2C module #2 */
+#define CFG_I2C_SPEED		100000	/* 100 kHz */
+#define CFG_I2C_SLAVE		0x7F
+
+
+/*
+ * EEPROM configuration
+ */
+#define CFG_I2C_EEPROM_ADDR_LEN		1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE	1	/* DTT driver needs this */
+#define CFG_EEPROM_PAGE_WRITE_BITS	1	/* 2 bytes per write cycle */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	5	/* 2ms/cycle + 3ms extra */
+#define CFG_I2C_MULTI_EEPROMS		1	/* 2 EEPROMs (addr:50,52) */
+
+
+/*
+ * RTC configuration
+ */
+#define CONFIG_RTC_DS1337	1
+#define CFG_I2C_RTC_ADDR	0x68
+
+
+/*
+ * Status LED configuration
+ */
+#define CONFIG_STATUS_LED		/* Status LED enabled */
+#define CONFIG_BOARD_SPECIFIC_LED
+
+#define ENABLE_GPIO_OUT		0x00000024
+#define LED_ON			0x00000010
+
+#ifndef __ASSEMBLY__
+/*
+ * In case of Motion-PRO, a LED is identified by its corresponding
+ * GPT Enable and Mode Select Register.
+ */
+typedef volatile unsigned long * led_id_t;
+
+extern void __led_init(led_id_t id, int state);
+extern void __led_toggle(led_id_t id);
+extern void __led_set(led_id_t id, int state);
+#endif /* __ASSEMBLY__ */
+
+
+/*
+ * Temperature sensor
+ */
+#define CONFIG_DTT_LM75		1
+#define CONFIG_DTT_SENSORS	{ 0x49 }
+
 
 /*
  * Environment settings
@@ -253,6 +351,9 @@
 #define CFG_ENV_SIZE		0x1000
 #define CFG_ENV_SECT_SIZE	0x10000
 
+/* Configuration of redundant environment */
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
 /*
  * Pin multiplexing configuration
@@ -270,11 +371,17 @@
 
 
 /*
+ * Motion-PRO's CPLD revision control register
+ */
+#define CPLD_REV_REGISTER	(CFG_CS2_START + 0x06)
+
+
+/*
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory    */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size */
 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
 #define CFG_MAXARGS		16		/* max number of command args */
 #define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
@@ -302,4 +409,15 @@
 /* Not needed for MPC 5xxx U-Boot, but used by tools/updater */
 #define CFG_RESET_ADDRESS	0xfff00100
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+#define OF_CPU			"PowerPC,5200@0"
+#define OF_SOC			"soc5200@f0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH		"/soc5200@f0000000/serial@2000"
+
 #endif /* __CONFIG_H */
diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h
index 5c05a74..63d0da7 100644
--- a/include/configs/o2dnt.h
+++ b/include/configs/o2dnt.h
@@ -137,17 +137,17 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133		/* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
-#if defined(CFG_IPBSPEED_133)
+#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
 /*
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
- * been tested with a IPB Bus Clock of 66 MHz.
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ *  of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
-#define CFG_PCISPEED_66			/* define for 66MHz speed */
+#define CFG_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
 #endif
 #endif
 
@@ -276,7 +276,7 @@
 #define CFG_BOOTCS_START	CFG_FLASH_BASE
 #define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
 
-#ifdef CFG_PCISPEED_66
+#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
 /*
  * For 66 MHz PCI clock additional Wait State is needed for CS0 (flash).
  */
diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h
index fefdb3c..7151a9e 100644
--- a/include/configs/pf5200.h
+++ b/include/configs/pf5200.h
@@ -171,7 +171,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBSPEED_133		/* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 #endif
 /*
  * I2C configuration
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index 6b6acfa..e4357b0 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -58,7 +58,7 @@
  * 0xFFE00000 .... 0xFFFFFFFF -> BOOT-ROM (2 MiB)
  */
 
-#define CONFIG_SOLIDCARD3	1
+#define CONFIG_SC3	1
 #define CONFIG_4xx	1
 #define CONFIG_405GP	1
 
@@ -134,7 +134,8 @@
 #if 1	/* feel free to disable for development */
 #define CONFIG_AUTOBOOT_KEYED		/* Enable password protection	*/
 #define CONFIG_AUTOBOOT_PROMPT		"\nSC3 - booting... stop with ENTER\n"
-#define CONFIG_AUTOBOOT_DELAY_STR	"\n"	/* 1st "password"	*/
+#define CONFIG_AUTOBOOT_DELAY_STR	"\r"	/* 1st "password"	*/
+#define CONFIG_AUTOBOOT_DELAY_STR2	"\n"	/* 1st "password"	*/
 #endif
 
 /*
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 1f19621..23243a4 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -38,7 +38,9 @@
 #define CONFIG_440GRX		1		/* Specific PPC440GRx	*/
 #endif
 #define CONFIG_4xx		1		/* ... PPC4xx family	*/
-#define CONFIG_SYS_CLK_FREQ	33000000	/* external freq to pll	*/
+/* Detect Sequoia PLL input clock automatically via CPLD bit		*/
+#define CONFIG_SYS_CLK_FREQ    ((in8(CFG_BCSR_BASE + 3) & 0x80) ? \
+				33333333 : 33000000)
 
 #define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_early_init_f */
 #define CONFIG_MISC_INIT_R	1		/* Call misc_init_r	*/
@@ -166,12 +168,19 @@
 /*
  * Now the NAND chip has to be defined (no autodetection used!)
  */
-#define CFG_NAND_PAGE_SIZE	(512)		/* NAND chip page size		*/
+#define CFG_NAND_PAGE_SIZE	512		/* NAND chip page size		*/
 #define CFG_NAND_BLOCK_SIZE	(16 << 10)	/* NAND chip block size		*/
-#define CFG_NAND_PAGE_COUNT	(32)		/* NAND chip page count		*/
-#define CFG_NAND_BAD_BLOCK_POS	(5)		/* Location of bad block marker	*/
+#define CFG_NAND_PAGE_COUNT	32		/* NAND chip page count		*/
+#define CFG_NAND_BAD_BLOCK_POS	5		/* Location of bad block marker	*/
 #undef CFG_NAND_4_ADDR_CYCLE			/* No fourth addr used (<=32MB)	*/
 
+#define CFG_NAND_ECCSIZE	256
+#define CFG_NAND_ECCBYTES	3
+#define CFG_NAND_ECCSTEPS	(CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE)
+#define CFG_NAND_OOBSIZE	16
+#define CFG_NAND_ECCTOTAL	(CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
+#define CFG_NAND_ECCPOS		{0, 1, 2, 3, 6, 7}
+
 #ifdef CFG_ENV_IS_IN_NAND
 /*
  * For NAND booting the environment is embedded in the U-Boot image. Please take
diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h
index e106b3b..185c2d4 100644
--- a/include/configs/smmaco4.h
+++ b/include/configs/smmaco4.h
@@ -138,17 +138,17 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133		/* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
-#if defined(CFG_IPBSPEED_133)
+#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
 /*
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
- * been tested with a IPB Bus Clock of 66 MHz.
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
-#define CFG_PCISPEED_66			/* define for 66MHz speed */
+#define CFG_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
 #endif
 
 /*
@@ -357,7 +357,7 @@
 
 #define CFG_BOOTCS_START	CFG_FLASH_BASE
 #define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#ifdef CFG_PCISPEED_66
+#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
 #define CFG_BOOTCS_CFG		0x0008DF30 /* for pci_clk  = 66 MHz */
 #else
 #define CFG_BOOTCS_CFG		0x0004DF30 /* for pci_clk = 33 MHz */
diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index f40dde2..9888d11 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -219,17 +219,17 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133		/* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
-#if defined(CFG_IPBSPEED_133)
+#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
 /*
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
- * been tested with a IPB Bus Clock of 66 MHz.
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
-#define CFG_PCISPEED_66			/* define for 66MHz speed */
+#define CFG_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
 #endif
 
 /*
@@ -444,7 +444,7 @@
 
 #define CFG_BOOTCS_START	CFG_FLASH_BASE
 #define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#ifdef CFG_PCISPEED_66
+#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
 #define CFG_BOOTCS_CFG		0x0008DF30 /* for pci_clk  = 66 MHz */
 #else
 #define CFG_BOOTCS_CFG		0x0004DF30 /* for pci_clk = 33 MHz */
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
new file mode 100644
index 0000000..1978a32
--- /dev/null
+++ b/include/configs/stxssa.h
@@ -0,0 +1,472 @@
+/*
+ * (C) Copyright 2005 Embedded Alley Solutions, Inc.
+ * Dan Malek <dan@embeddedalley.com>
+ * Copied from STx GP3.
+ * Updates for Silicon Tx GP3 SSA board.
+ *
+ * (C) Copyright 2002,2003 Motorola,Inc.
+ * Xianghua Xiao <X.Xiao@motorola.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* mpc8560ads board configuration file */
+/* please refer to doc/README.mpc85xx for more info */
+/* make sure you change the MAC address and other network params first,
+ * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE		1	/* BOOKE		*/
+#define CONFIG_E500		1	/* BOOKE e500 family	*/
+#define CONFIG_MPC85xx		1	/* MPC8540/MPC8560	*/
+#define CONFIG_CPM2		1	/* has CPM2 */
+#define CONFIG_STXSSA		1	/* Silicon Tx GPPP SSA board specific*/
+
+#undef  CONFIG_PCI	         	/* pci ethernet support	*/
+#define CONFIG_TSEC_ENET 		/* tsec ethernet support*/
+#undef CONFIG_ETHER_ON_FCC             /* cpm FCC ethernet support */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
+#undef  CONFIG_DDR_ECC			/* only for ECC DDR module */
+#undef CONFIG_DDR_DLL                  /* possible DLL fix needed */
+#define CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
+
+
+/* sysclk for MPC85xx
+ */
+
+#define CONFIG_SYS_CLK_FREQ     33000000 /* most pci cards are 33Mhz */
+
+/* Blinkin' LEDs for Robert :-)
+*/
+#define CONFIG_SHOW_ACTIVITY 1
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE                     /* toggle L2 cache         */
+#define  CONFIG_BTB                          /* toggle branch predition */
+#define  CONFIG_ADDR_STREAMING               /* toggle addr streaming   */
+
+#define CONFIG_BOARD_EARLY_INIT_F   1        /* Call board_pre_init      */
+
+#undef  CFG_DRAM_TEST                       /* memory test, takes time  */
+#define CFG_MEMTEST_START       0x00200000  /* memtest region */
+#define CFG_MEMTEST_END         0x00400000
+
+
+/* Localbus connector.  There are many options that can be
+ * connected here, including sdram or lots of flash.
+ * This address, however, is used to configure a 256M local bus
+ * window that includes the Config latch below.
+ */
+#define CFG_LBC_OPTION_BASE	0xF0000000      /* Localbus Extension */
+#define CFG_LBC_OPTION_SIZE	256		/* 256MB */
+
+/* There are various flash options used, we configure for the largest,
+ * which is 64Mbytes.  The CFI works fine and will discover the proper
+ * sizes.
+ */
+#ifdef CONFIG_STXSSA_4M
+#define CFG_FLASH_BASE		0xFFC00000      /* start of  4 MiB flash */
+#else
+#define CFG_FLASH_BASE		0xFC000000      /* start of 64 MiB flash */
+#endif
+#define CFG_BR0_PRELIM	(CFG_FLASH_BASE | 0x1801) /* port size 32bit	 */
+#define CFG_OR0_PRELIM	(CFG_FLASH_BASE | 0x0FF7)
+
+#define CFG_FLASH_CFI		1
+#define CFG_FLASH_CFI_DRIVER	1
+#undef CFG_FLASH_USE_BUFFER_WRITE 	/* use buffered writes (20x faster) */
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks	*/
+
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+
+#define CFG_FLASH_PROTECTION
+
+/* The configuration latch is Chip Select 1.
+ * It's an 8-bit latch in the lower 8 bits of the word.
+ */
+#define CFG_LBC_CFGLATCH_BASE	0xFB000000	/* Base of config latch */
+#define CFG_BR1_PRELIM		0xFB001801	/* 32-bit port */
+#define CFG_OR1_PRELIM		0xFFFF0FF7      /* 64K is enough */
+
+#define CFG_MONITOR_BASE    	TEXT_BASE	/* start of monitor	*/
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef  CFG_RAMBOOT
+#endif
+
+#ifdef CFG_RAMBOOT
+#define CFG_CCSRBAR_DEFAULT 	0x40000000	/* CCSRBAR by BDI cfg	*/
+#else
+#define CFG_CCSRBAR_DEFAULT 	0xff700000	/* CCSRBAR Default	*/
+#endif
+#define CFG_CCSRBAR             0xe0000000      /* relocated CCSRBAR    */
+#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR	*/
+
+
+/*
+ * DDR Setup
+ */
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory  */
+#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+
+#define SPD_EEPROM_ADDRESS 	0x54     	/*  DDR DIMM */
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+/* local bus definitions */
+#define CFG_BR2_PRELIM		0xf8001861	/* 64MB localbus SDRAM  */
+#define CFG_OR2_PRELIM		0xfc006901
+#define CFG_LBC_LCRR		0x00030004	/* local bus freq 	*/
+#define CFG_LBC_LBCR		0x00000000
+#define CFG_LBC_LSRT		0x20000000
+#define CFG_LBC_MRTPR		0x20000000
+#define CFG_LBC_LSDMR_1		0x2861b723
+#define CFG_LBC_LSDMR_2		0x0861b723
+#define CFG_LBC_LSDMR_3		0x0861b723
+#define CFG_LBC_LSDMR_4		0x1861b723
+#define CFG_LBC_LSDMR_5		0x4061b723
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK 	1
+#define CFG_INIT_RAM_ADDR       0x60000000      /* Initial RAM address  */
+#define CFG_INIT_RAM_END    	0x4000	    	/* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE  	128		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN	    	(256 * 1024)    /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN	    	(512 * 1024)    /* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX     2
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE    1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
+
+#define CFG_NS16550_COM1        (CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2        (CFG_CCSRBAR+0x4600)
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef  CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* I2C */
+#define CONFIG_FSL_I2C			/* Use FSL common I2C driver */
+#define  CONFIG_HARD_I2C    		/* I2C with hardware support*/
+#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+#if 0
+#define CFG_I2C_NOPROBES        {0x00}  /* Don't probe these addrs */
+#else
+/* I did the 'if 0' so we could keep the syntax above if ever needed. */
+#undef CFG_I2C_NOPROBES
+#endif
+#define CFG_I2C_OFFSET		0x3000
+
+/* I2C EEPROM.  AT24C32, we keep our environment in here.
+*/
+#define CFG_I2C_EEPROM_ADDR		0x51	/* 1010001x		*/
+#define CFG_I2C_EEPROM_ADDR_LEN		2
+#define CFG_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write	*/
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	20
+
+/*
+ * Standard 8555 PCI mapping.
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE	0x80000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI1_IO_BASE	0x00000000
+#define CFG_PCI1_IO_PHYS	0xe2000000
+#define CFG_PCI1_IO_SIZE	0x01000000	/* 16M */
+
+#define CFG_PCI2_MEM_BASE	0xa0000000
+#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
+#define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI2_IO_BASE	0x00000000
+#define CFG_PCI2_IO_PHYS	0xe3000000
+#define CFG_PCI2_IO_SIZE	0x01000000	/* 16M */
+
+#if defined(CONFIG_PCI) 		/* PCI Ethernet card */
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_TULIP
+
+#if !defined(CONFIG_PCI_PNP)
+  #define PCI_ENET0_IOADDR    	0xe0000000
+  #define PCI_ENET0_MEMADDR     0xe0000000
+  #define PCI_IDSEL_NUMBER      0x0c 	/* slot0->3(IDSEL)=12->15 */
+#endif
+
+#undef CONFIG_PCI_SCAN_SHOW
+#define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
+
+#endif /* CONFIG_PCI */
+
+#if defined(CONFIG_TSEC_ENET)
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 	1
+#endif
+
+#define CONFIG_MII		1	/* MII PHY management		*/
+
+#define CONFIG_MPC85XX_TSEC1	1
+#define CONFIG_MPC85XX_TSEC1_NAME	"TSEC0"
+#define CONFIG_MPC85XX_TSEC2	1
+#define CONFIG_MPC85XX_TSEC2_NAME	"TSEC1"
+#undef CONFIG_MPS85XX_FEC
+
+#define TSEC1_PHY_ADDR		2
+#define TSEC2_PHY_ADDR		4
+#define TSEC1_PHYIDX		0
+#define TSEC2_PHYIDX		0
+#define CONFIG_ETHPRIME		"TSEC0"
+
+#elif defined(CONFIG_ETHER_ON_FCC)	/* CPM FCC Ethernet */
+
+#define CONFIG_ETHER_ON_FCC2             /* define if ether on FCC   */
+#undef  CONFIG_ETHER_NONE               /* define if ether on something else */
+#define CONFIG_ETHER_INDEX      2       /* which channel for ether  */
+
+#if (CONFIG_ETHER_INDEX == 2)
+  /*
+   * - Rx-CLK is CLK13
+   * - Tx-CLK is CLK14
+   * - Select bus for bd/buffers
+   * - Full duplex
+   */
+  #define CFG_CMXFCR_MASK       (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+  #define CFG_CMXFCR_VALUE      (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+  #define CFG_CPMFCR_RAMTYPE    0
+#if 0
+  #define CFG_FCC_PSMR          (FCC_PSMR_FDE)
+#else
+  #define CFG_FCC_PSMR          0
+#endif
+  #define FETH2_RST		0x01
+#elif (CONFIG_ETHER_INDEX == 3)
+  /* need more definitions here for FE3 */
+  #define FETH3_RST		0x80
+#endif  				/* CONFIG_ETHER_INDEX */
+
+/* MDIO is done through the TSEC0 control.
+*/
+#define CONFIG_MII			/* MII PHY management */
+#undef CONFIG_BITBANGMII		/* bit-bang MII PHY management	*/
+
+#endif
+
+/* Environment - default config is in flash, see below */
+#if 0	/* in EEPROM */
+# define CFG_ENV_IS_IN_EEPROM	1
+# define CFG_ENV_OFFSET		0
+# define CFG_ENV_SIZE		2048
+#else	/* in flash */
+# define CFG_ENV_IS_IN_FLASH	1
+# ifdef CONFIG_STXSSA_4M
+#  define CFG_ENV_SECT_SIZE	0x20000
+# else	/* default configuration - 64 MiB flash */
+#  define CFG_ENV_SECT_SIZE	0x40000
+# endif
+# define CFG_ENV_ADDR		(CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
+# define CFG_ENV_SIZE		0x4000
+# define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
+# define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#endif
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+
+#define	CONFIG_TIMESTAMP		/* Print image info with ts	*/
+
+#if defined(CFG_RAMBOOT)
+  #if defined(CONFIG_PCI)
+  #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_PCI | \
+				CFG_CMD_PING | CFG_CMD_I2C) & \
+				 ~(CFG_CMD_ENV | \
+				  CFG_CMD_LOADS ))
+  #elif defined(CONFIG_TSEC_ENET)
+  #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_PING | \
+				CFG_CMD_MII | CFG_CMD_I2C ) & \
+				~(CFG_CMD_ENV))
+  #elif defined(CONFIG_ETHER_ON_FCC)
+  #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_MII | \
+				CFG_CMD_PING | CFG_CMD_I2C) & \
+				~(CFG_CMD_ENV))
+  #endif
+#else
+  #if defined(CONFIG_PCI)
+  #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_PCI | \
+				CFG_CMD_ELF | CFG_CMD_PING | CFG_CMD_I2C)
+  #elif defined(CONFIG_TSEC_ENET)
+  #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_PING | \
+				CFG_CMD_ELF | CFG_CMD_MII | CFG_CMD_I2C)
+  #elif defined(CONFIG_ETHER_ON_FCC)
+  #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_MII | \
+				CFG_CMD_ELF | CFG_CMD_PING | CFG_CMD_I2C)
+  #endif
+#endif
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	"SSA=> "	/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CFG_LOAD_ADDR	0x1000000	/* default load address */
+#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE		32768
+#define CFG_CACHELINE_SIZE	32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*Note: change below for your network setting!!! */
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
+#define CONFIG_ETHADDR	 00:e0:0c:07:9b:8a
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR  00:e0:0c:07:9b:8b
+#define CONFIG_HAS_ETH2
+#define CONFIG_ETH2ADDR  00:e0:0c:07:9b:8c
+#endif
+
+/*
+ * Environment in EEPROM is compatible with different flash sector sizes,
+ * but only little space is available, so we use a very simple setup.
+ * With environment in flash, we use a more powerful default configuration.
+ */
+#ifdef CFG_ENV_IS_IN_EEPROM		/* use restricted "standard" environment */
+
+#define CONFIG_BAUDRATE	 	38400
+
+#define CONFIG_BOOTDELAY	3	/* -1 disable autoboot */
+#define CONFIG_BOOTCOMMAND	"bootm 0xffc00000 0xffd00000"
+#define CONFIG_BOOTARGS		"root=/dev/nfs rw ip=any console=ttyS1,$baudrate"
+#define CONFIG_SERVERIP 	192.168.85.1
+#define CONFIG_IPADDR  		192.168.85.60
+#define CONFIG_GATEWAYIP	192.168.85.1
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_HOSTNAME 	STX_SSA
+#define CONFIG_ROOTPATH 	/gppproot
+#define CONFIG_BOOTFILE 	uImage
+#define CONFIG_LOADADDR		0x1000000
+
+#else /* ENV IS IN FLASH		-- use a full-blown envionment */
+
+#define CONFIG_BAUDRATE	 	115200
+
+#define CONFIG_BOOTDELAY	5	/* -1 disable autoboot */
+
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS		/* the boot command will set bootargs	*/
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"hostname=gp3ssa\0"						\
+	"bootfile=/tftpboot/gp3ssa/uImage\0"				\
+	"loadaddr=400000\0"						\
+	"netdev=eth0\0"							\
+	"consdev=ttyS1\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=$serverip:$rootpath\0"				\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs $bootargs "				\
+		"ip=$ipaddr:$serverip:$gatewayip:$netmask"		\
+		":$hostname:$netdev:off panic=1\0"			\
+	"addcons=setenv bootargs $bootargs "				\
+		"console=$consdev,$baudrate\0"				\
+	"flash_nfs=run nfsargs addip addcons;"				\
+		"bootm $kernel_addr\0"					\
+	"flash_self=run ramargs addip addcons;"				\
+		"bootm $kernel_addr $ramdisk_addr\0"			\
+	"net_nfs=tftp $loadaddr $bootfile;"				\
+		"run nfsargs addip addcons;bootm\0"			\
+	"rootpath=/opt/eldk/ppc_85xx\0"					\
+	"kernel_addr=FC000000\0"					\
+	"ramdisk_addr=FC200000\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#endif	/* CFG_ENV_IS_IN_EEPROM */
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/uc101.h b/include/configs/uc101.h
index 8cd8e9b..ff061ee 100644
--- a/include/configs/uc101.h
+++ b/include/configs/uc101.h
@@ -114,7 +114,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133		/* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
 /*
  * I2C configuration
diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index e19591d..0b7b19e 100644
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -167,7 +167,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBSPEED_133			/* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK			/* define for 133MHz speed */
 #endif
 
 /*
diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h
index a2f4810..b4c720d 100644
--- a/include/configs/xupv2p.h
+++ b/include/configs/xupv2p.h
@@ -132,6 +132,8 @@
 			CFG_CMD_LOADS |\
 			CFG_CMD_LOADB |\
 			CFG_CMD_MISC |\
+			CFG_CMD_FAT |\
+			CFG_CMD_EXT2 |\
 			CFG_CMD_PING \
 			)
 
@@ -163,12 +165,12 @@
 	"base 0;" \
 	"echo"
 
-
 /* system ace */
-/*#define	CONFIG_SYSTEMACE
-#define	DEBUG_SYSTEMACE
-#define	CFG_SYSTEMACE_BASE	0xCF000000
-#define	CFG_SYSTEMACE_WIDTH	16
-#define	CONFIG_DOS_PARTITION*/
+#define	CONFIG_SYSTEMACE
+/* #define DEBUG_SYSTEMACE */
+#define	SYSTEMACE_CONFIG_FPGA
+#define	CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
+#define	CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
+#define	CONFIG_DOS_PARTITION
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h
index c6aa8ec..1e8ed7a 100644
--- a/include/configs/zylonite.h
+++ b/include/configs/zylonite.h
@@ -174,7 +174,6 @@
 /*
  * NAND Flash
  */
-/* Use the new NAND code. (BOARDLIBS = drivers/nand/libnand.a required) */
 #define CONFIG_NEW_NAND_CODE
 #define CFG_NAND0_BASE		0x0
 #undef CFG_NAND1_BASE
diff --git a/include/linux/stat.h b/include/linux/stat.h
index 43fd53f..37f2924 100644
--- a/include/linux/stat.h
+++ b/include/linux/stat.h
@@ -67,7 +67,8 @@ struct stat {
 
 #endif	/* __PPC__ */
 
-#if defined (__ARM__) || defined (__I386__) || defined (__M68K__) || defined (__bfin__)
+#if defined (__ARM__) || defined (__I386__) || defined (__M68K__) || defined (__bfin__) ||\
+	defined (__microblaze__)
 
 struct stat {
 	unsigned short st_dev;
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index c2a4ff5..60fc214 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -95,6 +95,11 @@
 #define SPR_8321E_REV11			0x80660011
 #define SPR_8321_REV11			0x80670011
 
+#define SPR_8311_REV10			0x80B30010
+#define SPR_8311E_REV10			0x80B20010
+#define SPR_8313_REV10			0x80B10010
+#define SPR_8313E_REV10			0x80B00010
+
 /* SPCR - System Priority Configuration Register
  */
 #define SPCR_PCIHPE			0x10000000	/* PCI Highest Priority Enable */
@@ -121,6 +126,15 @@
 #define SPCR_TSEC2BDP_SHIFT		(31-29)
 #define SPCR_TSEC2EP			0x00000003	/* TSEC2 emergency priority */
 #define SPCR_TSEC2EP_SHIFT		(31-31)
+
+#elif defined(CONFIG_MPC831X)
+/* SPCR bits - MPC831x specific */
+#define SPCR_TSECDP			0x00003000	/* TSEC data priority */
+#define SPCR_TSECDP_SHIFT		(31-19)
+#define SPCR_TSECEP			0x00000C00	/* TSEC emergency priority */
+#define SPCR_TSECEP_SHIFT		(31-21)
+#define SPCR_TSECBDP			0x00000300	/* TSEC buffer descriptor priority */
+#define SPCR_TSECBDP_SHIFT		(31-23)
 #endif
 
 /* SICRL/H - System I/O Configuration Register Low/High
@@ -195,6 +209,36 @@
 #define SICRL_PCI_MSRC			0x10000000
 #define SICRL_URT_CTPR			0x06000000
 #define SICRL_IRQ_CTPR			0x00C00000
+
+#elif defined(CONFIG_MPC831X)
+/* SICRL bits - MPC831x specific */
+#define SICRL_LBC			0x30000000
+#define SICRL_UART			0x0C000000
+#define SICRL_SPI_A			0x03000000
+#define SICRL_SPI_B			0x00C00000
+#define SICRL_SPI_C			0x00300000
+#define SICRL_SPI_D			0x000C0000
+#define SICRL_USBDR			0x00000C00
+#define SICRL_ETSEC1_A			0x0000000C
+#define SICRL_ETSEC2_A			0x00000003
+
+/* SICRH bits - MPC831x specific */
+#define SICRH_INTR_A			0x02000000
+#define SICRH_INTR_B			0x00C00000
+#define SICRH_IIC			0x00300000
+#define SICRH_ETSEC2_B			0x000C0000
+#define SICRH_ETSEC2_C			0x00030000
+#define SICRH_ETSEC2_D			0x0000C000
+#define SICRH_ETSEC2_E			0x00003000
+#define SICRH_ETSEC2_F			0x00000C00
+#define SICRH_ETSEC2_G			0x00000300
+#define SICRH_ETSEC1_B			0x00000080
+#define SICRH_ETSEC1_C			0x00000060
+#define SICRH_GTX1_DLY			0x00000008
+#define SICRH_GTX2_DLY			0x00000004
+#define SICRH_TSOBI1			0x00000002
+#define SICRH_TSOBI2			0x00000001
+
 #endif
 
 /* SWCRR - System Watchdog Control Register
@@ -393,6 +437,28 @@
 #define HRCWH_ROM_LOC_LOCAL_16BIT	0x00600000
 #define HRCWH_ROM_LOC_LOCAL_32BIT	0x00700000
 
+#if defined(CONFIG_MPC831X)
+#define HRCWH_ROM_LOC_NAND_SP_8BIT 	0x00100000
+#define HRCWH_ROM_LOC_NAND_SP_16BIT	0x00200000
+#define HRCWH_ROM_LOC_NAND_LP_8BIT 	0x00500000
+#define HRCWH_ROM_LOC_NAND_LP_16BIT	0x00600000
+
+#define HRCWH_RL_EXT_LEGACY		0x00000000
+#define HRCWH_RL_EXT_NAND		0x00040000
+
+#define HRCWH_TSEC1M_IN_MII		0x00000000
+#define HRCWH_TSEC1M_IN_RMII		0x00002000
+#define HRCWH_TSEC1M_IN_RGMII		0x00006000
+#define HRCWH_TSEC1M_IN_RTBI		0x0000A000
+#define HRCWH_TSEC1M_IN_SGMII		0x0000C000
+
+#define HRCWH_TSEC2M_IN_MII		0x00000000
+#define HRCWH_TSEC2M_IN_RMII		0x00000400
+#define HRCWH_TSEC2M_IN_RGMII		0x00000C00
+#define HRCWH_TSEC2M_IN_RTBI		0x00001400
+#define HRCWH_TSEC2M_IN_SGMII		0x00001800
+#endif
+
 #if defined(CONFIG_MPC834X)
 #define HRCWH_TSEC1M_IN_RGMII		0x00000000
 #define HRCWH_TSEC1M_IN_RTBI		0x00004000
@@ -523,6 +589,18 @@
 #define SCCR_TSEC2CM_1			0x10000000
 #define SCCR_TSEC2CM_2			0x20000000
 #define SCCR_TSEC2CM_3			0x30000000
+
+#elif defined(CONFIG_MPC831X)
+/* TSEC1 bits are for TSEC2 as well */
+#define SCCR_TSEC1CM			0xc0000000
+#define SCCR_TSEC1CM_SHIFT		30
+#define SCCR_TSEC1CM_1			0x40000000
+#define SCCR_TSEC1CM_2			0x80000000
+#define SCCR_TSEC1CM_3			0xC0000000
+
+#define SCCR_TSEC1ON			0x20000000
+#define SCCR_TSEC2ON			0x10000000
+
 #endif
 
 #define SCCR_USBMPHCM			0x00c00000
@@ -556,6 +634,25 @@
 #define CSCONFIG_COL_BIT_10		0x00000002
 #define CSCONFIG_COL_BIT_11		0x00000003
 
+/* TIMING_CFG_0 - DDR SDRAM Timing Configuration 0
+ */
+#define TIMING_CFG0_RWT			0xC0000000
+#define TIMING_CFG0_RWT_SHIFT		30
+#define TIMING_CFG0_WRT			0x30000000
+#define TIMING_CFG0_WRT_SHIFT		28
+#define TIMING_CFG0_RRT			0x0C000000
+#define TIMING_CFG0_RRT_SHIFT		26
+#define TIMING_CFG0_WWT			0x03000000
+#define TIMING_CFG0_WWT_SHIFT		24
+#define TIMING_CFG0_ACT_PD_EXIT		0x00700000
+#define TIMING_CFG0_ACT_PD_EXIT_SHIFT	20
+#define TIMING_CFG0_PRE_PD_EXIT		0x00070000
+#define TIMING_CFG0_PRE_PD_EXIT_SHIFT	16
+#define TIMING_CFG0_ODT_PD_EXIT		0x00000F00
+#define TIMING_CFG0_ODT_PD_EXIT_SHIFT	8
+#define TIMING_CFG0_MRS_CYC		0x00000F00
+#define TIMING_CFG0_MRS_CYC_SHIFT	0
+
 /* TIMING_CFG_1 - DDR SDRAM Timing Configuration 1
  */
 #define TIMING_CFG1_PRETOACT		0x70000000
@@ -586,6 +683,17 @@
 #define TIMING_CFG2_WR_DATA_DELAY_SHIFT	10
 #define TIMING_CFG2_CPO_DEF		0x00000000	/* default (= CASLAT + 1) */
 
+#define TIMING_CFG2_ADD_LAT		0x70000000
+#define TIMING_CFG2_ADD_LAT_SHIFT	28
+#define TIMING_CFG2_WR_LAT_DELAY	0x00380000
+#define TIMING_CFG2_WR_LAT_DELAY_SHIFT	19
+#define TIMING_CFG2_RD_TO_PRE		0x0000E000
+#define TIMING_CFG2_RD_TO_PRE_SHIFT	13
+#define TIMING_CFG2_CKE_PLS		0x000001C0
+#define TIMING_CFG2_CKE_PLS_SHIFT	6
+#define TIMING_CFG2_FOUR_ACT		0x0000003F
+#define TIMING_CFG2_FOUR_ACT_SHIFT	0
+
 /* DDR_SDRAM_CFG - DDR SDRAM Control Configuration
  */
 #define SDRAM_CFG_MEM_EN		0x80000000
@@ -593,13 +701,14 @@
 #define SDRAM_CFG_ECC_EN		0x20000000
 #define SDRAM_CFG_RD_EN			0x10000000
 #define SDRAM_CFG_SDRAM_TYPE		0x03000000
+#define SDRAM_CFG_SDRAM_TYPE_DDR	0x02000000
 #define SDRAM_CFG_SDRAM_TYPE_SHIFT	24
 #define SDRAM_CFG_DYN_PWR		0x00200000
 #define SDRAM_CFG_32_BE			0x00080000
 #define SDRAM_CFG_8_BE			0x00040000
 #define SDRAM_CFG_NCAP			0x00020000
 #define SDRAM_CFG_2T_EN			0x00008000
-#define SDRAM_CFG_SDRAM_TYPE_DDR	0x02000000
+#define SDRAM_CFG_BI			0x00000001
 
 /* DDR_SDRAM_MODE - DDR SDRAM Mode Register
  */
@@ -732,11 +841,15 @@
 #define BR_PS_32			0x00001800	/* Port Size 32 bit */
 #define BR_DECC				0x00000600
 #define BR_DECC_SHIFT			9
+#define BR_DECC_OFF			0x00000000
+#define BR_DECC_CHK			0x00000200
+#define BR_DECC_CHK_GEN			0x00000400
 #define BR_WP				0x00000100
 #define BR_WP_SHIFT			8
 #define BR_MSEL				0x000000E0
 #define BR_MSEL_SHIFT			5
 #define BR_MS_GPCM			0x00000000	/* GPCM */
+#define BR_MS_FCM			0x00000020	/* FCM */
 #define BR_MS_SDRAM			0x00000060	/* SDRAM */
 #define BR_MS_UPMA			0x00000080	/* UPMA */
 #define BR_MS_UPMB			0x000000A0	/* UPMB */
@@ -803,6 +916,34 @@
 #define OR_GPCM_EAD			0x00000001
 #define OR_GPCM_EAD_SHIFT		0
 
+#define OR_FCM_AM			0xFFFF8000
+#define OR_FCM_AM_SHIFT				15
+#define OR_FCM_BCTLD			0x00001000
+#define OR_FCM_BCTLD_SHIFT			12
+#define OR_FCM_PGS			0x00000400
+#define OR_FCM_PGS_SHIFT			10
+#define OR_FCM_CSCT			0x00000200
+#define OR_FCM_CSCT_SHIFT			 9
+#define OR_FCM_CST			0x00000100
+#define OR_FCM_CST_SHIFT			 8
+#define OR_FCM_CHT			0x00000080
+#define OR_FCM_CHT_SHIFT			 7
+#define OR_FCM_SCY			0x00000070
+#define OR_FCM_SCY_SHIFT			 4
+#define OR_FCM_SCY_1			0x00000010
+#define OR_FCM_SCY_2			0x00000020
+#define OR_FCM_SCY_3			0x00000030
+#define OR_FCM_SCY_4			0x00000040
+#define OR_FCM_SCY_5			0x00000050
+#define OR_FCM_SCY_6			0x00000060
+#define OR_FCM_SCY_7			0x00000070
+#define OR_FCM_RST			0x00000008
+#define OR_FCM_RST_SHIFT			 3
+#define OR_FCM_TRLX			0x00000004
+#define OR_FCM_TRLX_SHIFT			 2
+#define OR_FCM_EHTR			0x00000002
+#define OR_FCM_EHTR_SHIFT			 1
+
 #define OR_UPM_AM			0xFFFF8000
 #define OR_UPM_AM_SHIFT			15
 #define OR_UPM_XAM			0x00006000
@@ -1019,4 +1160,118 @@
 #define PIWAR_IWS_1G			0x0000001D
 #define PIWAR_IWS_2G			0x0000001E
 
+/* PMCCR1 - PCI Configuration Register 1
+ */
+#define PMCCR1_POWER_OFF		0x00000020
+
+/* FMR - Flash Mode Register
+ */
+#define FMR_CWTO		0x0000F000
+#define FMR_CWTO_SHIFT		12
+#define FMR_BOOT		0x00000800
+#define FMR_ECCM		0x00000100
+#define FMR_AL			0x00000030
+#define FMR_AL_SHIFT		4
+#define FMR_OP			0x00000003
+#define FMR_OP_SHIFT		0
+
+/* FIR - Flash Instruction Register
+ */
+#define FIR_OP0			0xF0000000
+#define FIR_OP0_SHIFT		28
+#define FIR_OP1			0x0F000000
+#define FIR_OP1_SHIFT		24
+#define FIR_OP2			0x00F00000
+#define FIR_OP2_SHIFT		20
+#define FIR_OP3			0x000F0000
+#define FIR_OP3_SHIFT		16
+#define FIR_OP4			0x0000F000
+#define FIR_OP4_SHIFT		12
+#define FIR_OP5			0x00000F00
+#define FIR_OP5_SHIFT		8
+#define FIR_OP6			0x000000F0
+#define FIR_OP6_SHIFT		4
+#define FIR_OP7			0x0000000F
+#define FIR_OP7_SHIFT		0
+#define FIR_OP_NOP		0x0 /* No operation and end of sequence */
+#define FIR_OP_CA		0x1 /* Issue current column address */
+#define FIR_OP_PA		0x2 /* Issue current block+page address */
+#define FIR_OP_UA		0x3 /* Issue user defined address */
+#define FIR_OP_CM0		0x4 /* Issue command from FCR[CMD0] */
+#define FIR_OP_CM1		0x5 /* Issue command from FCR[CMD1] */
+#define FIR_OP_CM2		0x6 /* Issue command from FCR[CMD2] */
+#define FIR_OP_CM3		0x7 /* Issue command from FCR[CMD3] */
+#define FIR_OP_WB		0x8 /* Write FBCR bytes from FCM buffer */
+#define FIR_OP_WS		0x9 /* Write 1 or 2 bytes from MDR[AS] */
+#define FIR_OP_RB		0xA /* Read FBCR bytes to FCM buffer */
+#define FIR_OP_RS		0xB /* Read 1 or 2 bytes to MDR[AS] */
+#define FIR_OP_CW0		0xC /* Wait then issue FCR[CMD0] */
+#define FIR_OP_CW1		0xD /* Wait then issue FCR[CMD1] */
+#define FIR_OP_RBW		0xE /* Wait then read FBCR bytes */
+#define FIR_OP_RSW		0xF /* Wait then read 1 or 2 bytes */
+
+/* FCR - Flash Command Register
+ */
+#define FCR_CMD0		0xFF000000
+#define FCR_CMD0_SHIFT		24
+#define FCR_CMD1		0x00FF0000
+#define FCR_CMD1_SHIFT		16
+#define FCR_CMD2		0x0000FF00
+#define FCR_CMD2_SHIFT   	8
+#define FCR_CMD3		0x000000FF
+#define FCR_CMD3_SHIFT		0
+
+/* FBAR - Flash Block Address Register
+ */
+#define FBAR_BLK		0x00FFFFFF
+
+/* FPAR - Flash Page Address Register
+ */
+#define FPAR_SP_PI		0x00007C00
+#define FPAR_SP_PI_SHIFT	10
+#define FPAR_SP_MS		0x00000200
+#define FPAR_SP_CI		0x000001FF
+#define FPAR_SP_CI_SHIFT	0
+#define FPAR_LP_PI		0x0003F000
+#define FPAR_LP_PI_SHIFT	12
+#define FPAR_LP_MS		0x00000800
+#define FPAR_LP_CI		0x000007FF
+#define FPAR_LP_CI_SHIFT	0
+
+/* LTESR - Transfer Error Status Register
+ */
+#define LTESR_BM		0x80000000
+#define LTESR_FCT 		0x40000000
+#define LTESR_PAR 		0x20000000
+#define LTESR_WP		0x04000000
+#define LTESR_ATMW		0x00800000
+#define LTESR_ATMR		0x00400000
+#define LTESR_CS		0x00080000
+#define LTESR_CC		0x00000001
+
+/* DDR Control Driver Register
+ */
+#define DDRCDR_EN		0x40000000
+#define DDRCDR_PZ		0x3C000000
+#define DDRCDR_PZ_MAXZ		0x00000000
+#define DDRCDR_PZ_HIZ		0x20000000
+#define DDRCDR_PZ_NOMZ		0x30000000
+#define DDRCDR_PZ_LOZ		0x38000000
+#define DDRCDR_PZ_MINZ		0x3C000000
+#define DDRCDR_NZ		0x3C000000
+#define DDRCDR_NZ_MAXZ		0x00000000
+#define DDRCDR_NZ_HIZ		0x02000000
+#define DDRCDR_NZ_NOMZ		0x03000000
+#define DDRCDR_NZ_LOZ		0x03800000
+#define DDRCDR_NZ_MINZ		0x03C00000
+#define DDRCDR_ODT		0x00080000
+#define DDRCDR_DDR_CFG		0x00040000
+#define DDRCDR_M_ODR		0x00000002
+#define DDRCDR_Q_DRN		0x00000001
+
+#ifndef __ASSEMBLY__
+struct pci_region;
+void mpc83xx_pci_init(int num_buses, struct pci_region **reg, int warmboot);
+#endif
+
 #endif	/* __MPC83XX_H__ */
diff --git a/include/mpc86xx.h b/include/mpc86xx.h
index bc8ba3f..673bfed 100644
--- a/include/mpc86xx.h
+++ b/include/mpc86xx.h
@@ -9,6 +9,15 @@
 
 #define EXC_OFF_SYS_RESET	0x0100	/* System reset	offset */
 
+
+/*
+ * platform register addresses
+ */
+
+#define GUTS_SVR	(CFG_CCSRBAR + 0xE00A4)
+#define MCM_ABCR	(CFG_CCSRBAR + 0x01000)
+#define MCM_DBCR	(CFG_CCSRBAR + 0x01008)
+
 /*
  * l2cr values.  Look in config_<BOARD>.h for the actual setup
  */
diff --git a/include/ppc405.h b/include/ppc405.h
index a2503a9..71ad12e 100644
--- a/include/ppc405.h
+++ b/include/ppc405.h
@@ -547,8 +547,8 @@
 #define sdrcfga (SDR_DCR_BASE+0x0)	/* ADDR */
 #define sdrcfgd (SDR_DCR_BASE+0x1)	/* Data */
 
-#define mtsdr(reg, data) mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data)
-#define mfsdr(reg, data) mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd)
+#define mtsdr(reg, data)	do { mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data); } while (0)
+#define mfsdr(reg, data)	do { mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd); } while (0)
 
 #define sdrnand0	0x4000
 #define sdrultra0	0x4040
@@ -556,6 +556,11 @@
 #define sdricintstat	0x4510
 
 #define SDR_NAND0_NDEN		0x80000000
+#define SDR_NAND0_NDBTEN	0x40000000
+#define SDR_NAND0_NDBADR_MASK	0x30000000
+#define SDR_NAND0_NDBPG_MASK	0x0f000000
+#define SDR_NAND0_NDAREN	0x00800000
+#define SDR_NAND0_NDRBEN	0x00400000
 
 #define SDR_ULTRA0_NDGPIOBP	0x80000000
 #define SDR_ULTRA0_CSN_MASK	0x78000000
@@ -563,6 +568,9 @@
 #define SDR_ULTRA0_CSNSEL1	0x20000000
 #define SDR_ULTRA0_CSNSEL2	0x10000000
 #define SDR_ULTRA0_CSNSEL3	0x08000000
+#define SDR_ULTRA0_EBCRDYEN	0x04000000
+#define SDR_ULTRA0_SPISSINEN	0x02000000
+#define SDR_ULTRA0_NFSRSTEN	0x01000000
 
 #define SDR_ULTRA1_LEDNENABLE	0x40000000
 
@@ -593,8 +601,8 @@
 /*
  * Macro for accessing the indirect CPR register
  */
-#define mtcpr(reg, data)  mtdcr(cprcfga,reg);mtdcr(cprcfgd,data)
-#define mfcpr(reg, data)  mtdcr(cprcfga,reg);data = mfdcr(cprcfgd)
+#define mtcpr(reg, data)	do { mtdcr(cprcfga,reg);mtdcr(cprcfgd,data); } while (0)
+#define mfcpr(reg, data)	do { mtdcr(cprcfga,reg);data = mfdcr(cprcfgd); } while (0)
 
 #define CPR_CLKUPD_ENPLLCH_EN  0x40000000     /* Enable CPR PLL Changes */
 #define CPR_CLKUPD_ENDVCH_EN   0x20000000     /* Enable CPR Sys. Div. Changes */
diff --git a/include/ppc440.h b/include/ppc440.h
index bc1d7aa..07f75de 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -1425,9 +1425,6 @@
 /*----------------------------------------------------------------------------+
 | Clock / Power-on-reset DCR's.
 +----------------------------------------------------------------------------*/
-#define CPR0_CFGADDR			0x00C
-#define CPR0_CFGDATA			0x00D
-
 #define CPR0_CLKUPD			0x20
 #define CPR0_CLKUPD_BSY_MASK		0x80000000
 #define CPR0_CLKUPD_BSY_COMPLETED	0x00000000
@@ -3314,6 +3311,23 @@
 #define mtsdr(reg, data)	do { mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data); } while (0)
 #define mfsdr(reg, data)	do { mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd); } while (0)
 
+/*
+ * All 44x except 440GP have CPR registers (indirect DCR)
+ */
+#if !defined(CONFIG_440GP)
+#define CPR0_CFGADDR		0x00C
+#define CPR0_CFGDATA		0x00D
+
+#define mtcpr(reg, data)	do { \
+		mtdcr(CPR0_CFGADDR, reg); \
+		mtdcr(CPR0_CFGDATA, data); \
+	} while (0)
+
+#define mfcpr(reg, data)	do { \
+		mtdcr(CPR0_CFGADDR, reg); \
+		data = mfdcr(CPR0_CFGDATA); \
+	} while (0)
+#endif
 
 #ifndef __ASSEMBLY__
 
diff --git a/include/status_led.h b/include/status_led.h
index db4c60f..71a202f 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -355,6 +355,18 @@ void status_led_set  (int led, int state);
 # define STATUS_LED_ACTIVE	0		/* LED on for bit == 0 */
 # define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
 
+#elif defined(CONFIG_MOTIONPRO)
+
+#define STATUS_LED_BIT		((vu_long *) MPC5XXX_GPT6_ENABLE)
+#define STATUS_LED_PERIOD	(CFG_HZ / 10)
+#define STATUS_LED_STATE	STATUS_LED_BLINKING
+
+#define STATUS_LED_BIT1		((vu_long *) MPC5XXX_GPT7_ENABLE)
+#define STATUS_LED_PERIOD1	(CFG_HZ / 10)
+#define STATUS_LED_STATE1	STATUS_LED_OFF
+
+#define STATUS_LED_BOOT		0	/* LED 0 used for boot status */
+
 #else
 # error Status LED configuration missing
 #endif