Merging Stelian Pop AT91 patches

Merge branch 'testing-V2'

Conflicts:

	board/atmel/at91cap9adk/Makefile
                Fixing copyright
	board/atmel/at91sam9260ek/Makefile
                Fixing copyright
	board/atmel/at91sam9260ek/u-boot.lds
                Delete no more needed ld script

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

17 files changed, 1505 insertions, 17 deletions

diff --git a/include/asm-arm/arch-at91sam9/at91_pmc.h b/include/asm-arm/arch-at91sam9/at91_pmc.h
index 103be86..b57875d 100644
--- a/include/asm-arm/arch-at91sam9/at91_pmc.h
+++ b/include/asm-arm/arch-at91sam9/at91_pmc.h
@@ -96,4 +96,9 @@
 #define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
 #define	AT91_PMC_IMR		(AT91_PMC + 0x6c)	/* Interrupt Mask Register */
 
+#define AT91_PMC_PROT		(AT91_PMC + 0xe4)	/* Protect Register [AT91CAP9 revC only] */
+#define		AT91_PMC_PROTKEY	0x504d4301		/* Activation Code */
+
+#define AT91_PMC_VER	(AT91_PMC + 0xfc)	/* PMC Module Version [AT91CAP9 only] */
+
 #endif
diff --git a/include/asm-arm/arch-at91sam9/at91cap9.h b/include/asm-arm/arch-at91sam9/at91cap9.h
index d1b33a0..0b52228 100644
--- a/include/asm-arm/arch-at91sam9/at91cap9.h
+++ b/include/asm-arm/arch-at91sam9/at91cap9.h
@@ -101,13 +101,25 @@
 #define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
 #define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
 #define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
-#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
+#define AT91_SCKCR	(0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR_REVB	(0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR_REVC	(0xfffffd60 - AT91_BASE_SYS)
 
 #define AT91_USART0	AT91CAP9_BASE_US0
 #define AT91_USART1	AT91CAP9_BASE_US1
 #define AT91_USART2	AT91CAP9_BASE_US2
 
 /*
+ * SCKCR flags
+ */
+#define AT91CAP9_SCKCR_RCEN	(1 << 0)	/* RC Oscillator Enable */
+#define AT91CAP9_SCKCR_OSC32EN	(1 << 1)	/* 32kHz Oscillator Enable */
+#define AT91CAP9_SCKCR_OSC32BYP	(1 << 2)	/* 32kHz Oscillator Bypass */
+#define AT91CAP9_SCKCR_OSCSEL	(1 << 3)	/* Slow Clock Selector */
+#define		AT91CAP9_SCKCR_OSCSEL_RC	(0 << 3)
+#define		AT91CAP9_SCKCR_OSCSEL_32	(1 << 3)
+
+/*
  * Internal Memory.
  */
 #define AT91CAP9_SRAM_BASE	0x00100000	/* Internal SRAM base address */
diff --git a/include/asm-arm/arch-at91sam9/at91sam9261.h b/include/asm-arm/arch-at91sam9/at91sam9261.h
new file mode 100644
index 0000000..752d81d
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/at91sam9261.h
@@ -0,0 +1,105 @@
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9261.h]
+ *
+ * Copyright (C) SAN People
+ *
+ * Common definitions.
+ * Based on AT91SAM9261 datasheet revision E. (Preliminary)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9261_H
+#define AT91SAM9261_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91SAM9261_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91SAM9261_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91SAM9261_ID_PIOC	4	/* Parallel IO Controller C */
+#define AT91SAM9261_ID_US0	6	/* USART 0 */
+#define AT91SAM9261_ID_US1	7	/* USART 1 */
+#define AT91SAM9261_ID_US2	8	/* USART 2 */
+#define AT91SAM9261_ID_MCI	9	/* Multimedia Card Interface */
+#define AT91SAM9261_ID_UDP	10	/* USB Device Port */
+#define AT91SAM9261_ID_TWI	11	/* Two-Wire Interface */
+#define AT91SAM9261_ID_SPI0	12	/* Serial Peripheral Interface 0 */
+#define AT91SAM9261_ID_SPI1	13	/* Serial Peripheral Interface 1 */
+#define AT91SAM9261_ID_SSC0	14	/* Serial Synchronous Controller 0 */
+#define AT91SAM9261_ID_SSC1	15	/* Serial Synchronous Controller 1 */
+#define AT91SAM9261_ID_SSC2	16	/* Serial Synchronous Controller 2 */
+#define AT91SAM9261_ID_TC0	17	/* Timer Counter 0 */
+#define AT91SAM9261_ID_TC1	18	/* Timer Counter 1 */
+#define AT91SAM9261_ID_TC2	19	/* Timer Counter 2 */
+#define AT91SAM9261_ID_UHP	20	/* USB Host port */
+#define AT91SAM9261_ID_LCDC	21	/* LDC Controller */
+#define AT91SAM9261_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9261_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
+#define AT91SAM9261_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9261_BASE_TCB0		0xfffa0000
+#define AT91SAM9261_BASE_TC0		0xfffa0000
+#define AT91SAM9261_BASE_TC1		0xfffa0040
+#define AT91SAM9261_BASE_TC2		0xfffa0080
+#define AT91SAM9261_BASE_UDP		0xfffa4000
+#define AT91SAM9261_BASE_MCI		0xfffa8000
+#define AT91SAM9261_BASE_TWI		0xfffac000
+#define AT91SAM9261_BASE_US0		0xfffb0000
+#define AT91SAM9261_BASE_US1		0xfffb4000
+#define AT91SAM9261_BASE_US2		0xfffb8000
+#define AT91SAM9261_BASE_SSC0		0xfffbc000
+#define AT91SAM9261_BASE_SSC1		0xfffc0000
+#define AT91SAM9261_BASE_SSC2		0xfffc4000
+#define AT91SAM9261_BASE_SPI0		0xfffc8000
+#define AT91SAM9261_BASE_SPI1		0xfffcc000
+#define AT91_BASE_SYS			0xffffea00
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91SAM9261_BASE_US0
+#define AT91_USART1	AT91SAM9261_BASE_US1
+#define AT91_USART2	AT91SAM9261_BASE_US2
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9261_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+#define AT91SAM9261_SRAM_SIZE	0x00028000	/* Internal SRAM size (160Kb) */
+
+#define AT91SAM9261_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9261_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
+
+#define AT91SAM9261_UHP_BASE	0x00500000	/* USB Host controller */
+#define AT91SAM9261_LCDC_BASE	0x00600000	/* LDC controller */
+
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/at91sam9261_matrix.h b/include/asm-arm/arch-at91sam9/at91sam9261_matrix.h
new file mode 100644
index 0000000..e2bfc4b
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/at91sam9261_matrix.h
@@ -0,0 +1,64 @@
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9261_matrix.h]
+ *
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9261_MATRIX_H
+#define AT91SAM9261_MATRIX_H
+
+#define AT91_MATRIX_MCFG	(AT91_MATRIX + 0x00)	/* Master Configuration Register */
+#define		AT91_MATRIX_RCB0	(1 << 0)		/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1	(1 << 1)		/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x04)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x08)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x0C)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x10)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x14)	/* Slave Configuration Register 4 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
+
+#define AT91_MATRIX_TCR		(AT91_MATRIX + 0x24)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_16		(5 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define			AT91_MATRIX_ITCM_64		(7 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_16		(5 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+#define			AT91_MATRIX_DTCM_64		(7 << 4)
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x30)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
+#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
+#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+
+#define AT91_MATRIX_USBPUCR	(AT91_MATRIX + 0x34)	/* USB Pad Pull-Up Control Register */
+#define		AT91_MATRIX_USBPUCR_PUON	(1 << 30)	/* USB Device PAD Pull-up Enable */
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/at91sam9263.h b/include/asm-arm/arch-at91sam9/at91sam9263.h
new file mode 100644
index 0000000..98251cb
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/at91sam9263.h
@@ -0,0 +1,127 @@
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9263.h]
+ *
+ * (C) 2007 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_H
+#define AT91SAM9263_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91SAM9263_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91SAM9263_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91SAM9263_ID_PIOCDE	4	/* Parallel IO Controller C, D and E */
+#define AT91SAM9263_ID_US0	7	/* USART 0 */
+#define AT91SAM9263_ID_US1	8	/* USART 1 */
+#define AT91SAM9263_ID_US2	9	/* USART 2 */
+#define AT91SAM9263_ID_MCI0	10	/* Multimedia Card Interface 0 */
+#define AT91SAM9263_ID_MCI1	11	/* Multimedia Card Interface 1 */
+#define AT91SAM9263_ID_CAN	12	/* CAN */
+#define AT91SAM9263_ID_TWI	13	/* Two-Wire Interface */
+#define AT91SAM9263_ID_SPI0	14	/* Serial Peripheral Interface 0 */
+#define AT91SAM9263_ID_SPI1	15	/* Serial Peripheral Interface 1 */
+#define AT91SAM9263_ID_SSC0	16	/* Serial Synchronous Controller 0 */
+#define AT91SAM9263_ID_SSC1	17	/* Serial Synchronous Controller 1 */
+#define AT91SAM9263_ID_AC97C	18	/* AC97 Controller */
+#define AT91SAM9263_ID_TCB	19	/* Timer Counter 0, 1 and 2 */
+#define AT91SAM9263_ID_PWMC	20	/* Pulse Width Modulation Controller */
+#define AT91SAM9263_ID_EMAC	21	/* Ethernet */
+#define AT91SAM9263_ID_2DGE	23	/* 2D Graphic Engine */
+#define AT91SAM9263_ID_UDP	24	/* USB Device Port */
+#define AT91SAM9263_ID_ISI	25	/* Image Sensor Interface */
+#define AT91SAM9263_ID_LCDC	26	/* LCD Controller */
+#define AT91SAM9263_ID_DMA	27	/* DMA Controller */
+#define AT91SAM9263_ID_UHP	29	/* USB Host port */
+#define AT91SAM9263_ID_IRQ0	30	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9263_ID_IRQ1	31	/* Advanced Interrupt Controller (IRQ1) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9263_BASE_UDP		0xfff78000
+#define AT91SAM9263_BASE_TCB0		0xfff7c000
+#define AT91SAM9263_BASE_TC0		0xfff7c000
+#define AT91SAM9263_BASE_TC1		0xfff7c040
+#define AT91SAM9263_BASE_TC2		0xfff7c080
+#define AT91SAM9263_BASE_MCI0		0xfff80000
+#define AT91SAM9263_BASE_MCI1		0xfff84000
+#define AT91SAM9263_BASE_TWI		0xfff88000
+#define AT91SAM9263_BASE_US0		0xfff8c000
+#define AT91SAM9263_BASE_US1		0xfff90000
+#define AT91SAM9263_BASE_US2		0xfff94000
+#define AT91SAM9263_BASE_SSC0		0xfff98000
+#define AT91SAM9263_BASE_SSC1		0xfff9c000
+#define AT91SAM9263_BASE_AC97C		0xfffa0000
+#define AT91SAM9263_BASE_SPI0		0xfffa4000
+#define AT91SAM9263_BASE_SPI1		0xfffa8000
+#define AT91SAM9263_BASE_CAN		0xfffac000
+#define AT91SAM9263_BASE_PWMC		0xfffb8000
+#define AT91SAM9263_BASE_EMAC		0xfffbc000
+#define AT91SAM9263_BASE_ISI		0xfffc4000
+#define AT91SAM9263_BASE_2DGE		0xfffc8000
+#define AT91_BASE_SYS			0xffffe000
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC0	(0xffffe000 - AT91_BASE_SYS)
+#define AT91_SDRAMC0	(0xffffe200 - AT91_BASE_SYS)
+#define AT91_SMC0	(0xffffe400 - AT91_BASE_SYS)
+#define AT91_ECC1	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_SDRAMC1	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_SMC1	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_CCFG	(0xffffed10 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOE	(0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT0	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_RTT1	(0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91SAM9263_BASE_US0
+#define AT91_USART1	AT91SAM9263_BASE_US1
+#define AT91_USART2	AT91SAM9263_BASE_US2
+
+#define AT91_SMC	AT91_SMC0
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9263_SRAM0_BASE	0x00300000	/* Internal SRAM 0 base address */
+#define AT91SAM9263_SRAM0_SIZE	(80 * SZ_1K)	/* Internal SRAM 0 size (80Kb) */
+
+#define AT91SAM9263_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9263_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
+
+#define AT91SAM9263_SRAM1_BASE	0x00500000	/* Internal SRAM 1 base address */
+#define AT91SAM9263_SRAM1_SIZE	SZ_16K		/* Internal SRAM 1 size (16Kb) */
+
+#define AT91SAM9263_LCDC_BASE	0x00700000	/* LCD Controller */
+#define AT91SAM9263_DMAC_BASE	0x00800000	/* DMA Controller */
+#define AT91SAM9263_UHP_BASE	0x00a00000	/* USB Host controller */
+
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/at91sam9263_matrix.h b/include/asm-arm/arch-at91sam9/at91sam9263_matrix.h
new file mode 100644
index 0000000..83aaaab
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/at91sam9263_matrix.h
@@ -0,0 +1,129 @@
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9263_matrix.h]
+ *
+ *  Copyright (C) 2006 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_MATRIX_H
+#define AT91SAM9263_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
+#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
+#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
+#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
+#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define		AT91_MATRIX_RCB2		(1 << 2)
+#define		AT91_MATRIX_RCB3		(1 << 3)
+#define		AT91_MATRIX_RCB4		(1 << 4)
+#define		AT91_MATRIX_RCB5		(1 << 5)
+#define		AT91_MATRIX_RCB6		(1 << 6)
+#define		AT91_MATRIX_RCB7		(1 << 7)
+#define		AT91_MATRIX_RCB8		(1 << 8)
+
+#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x114)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_16		(5 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_16		(5 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+
+#define AT91_MATRIX_EBI0CSA	(AT91_MATRIX + 0x120)	/* EBI0 Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI0_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI0_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI0_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI0_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI0_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI0_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_EBI0_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_EBI0_CS4A_SMC_CF1		(1 << 4)
+#define		AT91_MATRIX_EBI0_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_EBI0_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_EBI0_CS5A_SMC_CF2		(1 << 5)
+#define		AT91_MATRIX_EBI0_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_EBI0_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI0_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI0_VDDIOMSEL_3_3V		(1 << 16)
+
+#define AT91_MATRIX_EBI1CSA	(AT91_MATRIX + 0x124)	/* EBI1 Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI1_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI1_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI1_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI1_CS2A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI1_CS2A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI1_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_EBI1_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI1_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI1_VDDIOMSEL_3_3V		(1 << 16)
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/at91sam9rl.h b/include/asm-arm/arch-at91sam9/at91sam9rl.h
new file mode 100644
index 0000000..215bbc8
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/at91sam9rl.h
@@ -0,0 +1,115 @@
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9rl.h]
+ *
+ *  Copyright (C) 2007 Atmel Corporation
+ *
+ * Common definitions.
+ * Based on AT91SAM9RL datasheet revision A. (Preliminary)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef AT91SAM9RL_H
+#define AT91SAM9RL_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Controller */
+#define AT91SAM9RL_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91SAM9RL_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91SAM9RL_ID_PIOC	4	/* Parallel IO Controller C */
+#define AT91SAM9RL_ID_PIOD	5	/* Parallel IO Controller D */
+#define AT91SAM9RL_ID_US0	6	/* USART 0 */
+#define AT91SAM9RL_ID_US1	7	/* USART 1 */
+#define AT91SAM9RL_ID_US2	8	/* USART 2 */
+#define AT91SAM9RL_ID_US3	9	/* USART 3 */
+#define AT91SAM9RL_ID_MCI	10	/* Multimedia Card Interface */
+#define AT91SAM9RL_ID_TWI0	11	/* TWI 0 */
+#define AT91SAM9RL_ID_TWI1	12	/* TWI 1 */
+#define AT91SAM9RL_ID_SPI	13	/* Serial Peripheral Interface */
+#define AT91SAM9RL_ID_SSC0	14	/* Serial Synchronous Controller 0 */
+#define AT91SAM9RL_ID_SSC1	15	/* Serial Synchronous Controller 1 */
+#define AT91SAM9RL_ID_TC0	16	/* Timer Counter 0 */
+#define AT91SAM9RL_ID_TC1	17	/* Timer Counter 1 */
+#define AT91SAM9RL_ID_TC2	18	/* Timer Counter 2 */
+#define AT91SAM9RL_ID_PWMC	19	/* Pulse Width Modulation Controller */
+#define AT91SAM9RL_ID_TSC	20	/* Touch Screen Controller */
+#define AT91SAM9RL_ID_DMA	21	/* DMA Controller */
+#define AT91SAM9RL_ID_UDPHS	22	/* USB Device HS */
+#define AT91SAM9RL_ID_LCDC	23	/* LCD Controller */
+#define AT91SAM9RL_ID_AC97C	24	/* AC97 Controller */
+#define AT91SAM9RL_ID_IRQ0	31	/* Advanced Interrupt Controller (IRQ0) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9RL_BASE_TCB0	0xfffa0000
+#define AT91SAM9RL_BASE_TC0	0xfffa0000
+#define AT91SAM9RL_BASE_TC1	0xfffa0040
+#define AT91SAM9RL_BASE_TC2	0xfffa0080
+#define AT91SAM9RL_BASE_MCI	0xfffa4000
+#define AT91SAM9RL_BASE_TWI0	0xfffa8000
+#define AT91SAM9RL_BASE_TWI1	0xfffac000
+#define AT91SAM9RL_BASE_US0	0xfffb0000
+#define AT91SAM9RL_BASE_US1	0xfffb4000
+#define AT91SAM9RL_BASE_US2	0xfffb8000
+#define AT91SAM9RL_BASE_US3	0xfffbc000
+#define AT91SAM9RL_BASE_SSC0	0xfffc0000
+#define AT91SAM9RL_BASE_SSC1	0xfffc4000
+#define AT91SAM9RL_BASE_PWMC	0xfffc8000
+#define AT91SAM9RL_BASE_SPI	0xfffcc000
+#define AT91SAM9RL_BASE_TSC	0xfffd0000
+#define AT91SAM9RL_BASE_UDPHS	0xfffd4000
+#define AT91SAM9RL_BASE_AC97C	0xfffd8000
+#define AT91_BASE_SYS		0xffffc000
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_DMA	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOD	(0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_SCKCR	(0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
+#define AT91_RTC	(0xfffffe00 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91SAM9RL_BASE_US0
+#define AT91_USART1	AT91SAM9RL_BASE_US1
+#define AT91_USART2	AT91SAM9RL_BASE_US2
+#define AT91_USART3	AT91SAM9RL_BASE_US3
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9RL_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+#define AT91SAM9RL_SRAM_SIZE	SZ_16K		/* Internal SRAM size (16Kb) */
+
+#define AT91SAM9RL_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9RL_ROM_SIZE	(2 * SZ_16K)	/* Internal ROM size (32Kb) */
+
+#define AT91SAM9RL_LCDC_BASE	0x00500000	/* LCD Controller */
+#define AT91SAM9RL_UDPHS_BASE	0x00600000	/* USB Device HS controller */
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/at91sam9rl_matrix.h b/include/asm-arm/arch-at91sam9/at91sam9rl_matrix.h
new file mode 100644
index 0000000..af8d914
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/at91sam9rl_matrix.h
@@ -0,0 +1,96 @@
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9rl_matrix.h]
+ *
+ *  Copyright (C) 2007 Atmel Corporation
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9RL datasheet revision A. (Preliminary)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef AT91SAM9RL_MATRIX_H
+#define AT91SAM9RL_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
+#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
+#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define		AT91_MATRIX_RCB2		(1 << 2)
+#define		AT91_MATRIX_RCB3		(1 << 3)
+#define		AT91_MATRIX_RCB4		(1 << 4)
+#define		AT91_MATRIX_RCB5		(1 << 5)
+
+#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x114)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_16		(5 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_16		(5 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x120)	/* EBI0 Chip Select Assignment Register */
+#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
+#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
+#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_VDDIOMSEL		(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
+#define			AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
+
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/clk.h b/include/asm-arm/arch-at91sam9/clk.h
index f67b435..1b502c8 100644
--- a/include/asm-arm/arch-at91sam9/clk.h
+++ b/include/asm-arm/arch-at91sam9/clk.h
@@ -36,4 +36,10 @@ static inline unsigned long get_usart_clk_rate(unsigned int dev_id)
 	return AT91_MASTER_CLOCK;
 }
 
+static inline unsigned long get_lcdc_clk_rate(unsigned int dev_id)
+{
+	return AT91_MASTER_CLOCK;
+}
+
+
 #endif /* __ASM_ARM_ARCH_CLK_H__ */
diff --git a/include/asm-arm/arch-at91sam9/hardware.h b/include/asm-arm/arch-at91sam9/hardware.h
index d2fe453..e7c572d 100644
--- a/include/asm-arm/arch-at91sam9/hardware.h
+++ b/include/asm-arm/arch-at91sam9/hardware.h
@@ -26,10 +26,19 @@
 #define AT91_PMC_UHP	AT91SAM926x_PMC_UHP
 #elif defined(CONFIG_AT91SAM9261)
 #include <asm/arch/at91sam9261.h>
+#define AT91_BASE_SPI	AT91SAM9261_BASE_SPI0
+#define AT91_ID_UHP	AT91SAM9261_ID_UHP
+#define AT91_PMC_UHP	AT91SAM926x_PMC_UHP
 #elif defined(CONFIG_AT91SAM9263)
 #include <asm/arch/at91sam9263.h>
+#define AT91_BASE_EMAC	AT91SAM9263_BASE_EMAC
+#define AT91_BASE_SPI	AT91SAM9263_BASE_SPI0
+#define AT91_ID_UHP	AT91SAM9263_ID_UHP
+#define AT91_PMC_UHP	AT91SAM926x_PMC_UHP
 #elif defined(CONFIG_AT91SAM9RL)
 #include <asm/arch/at91sam9rl.h>
+#define AT91_BASE_SPI	AT91SAM9RL_BASE_SPI
+#define AT91_ID_UHP	AT91SAM9RL_ID_UHP
 #elif defined(CONFIG_AT91CAP9)
 #include <asm/arch/at91cap9.h>
 #define AT91_BASE_EMAC	AT91CAP9_BASE_EMAC
diff --git a/include/atmel_lcdc.h b/include/atmel_lcdc.h
new file mode 100644
index 0000000..73dd8f7
--- /dev/null
+++ b/include/atmel_lcdc.h
@@ -0,0 +1,177 @@
+/*
+ *  Header file for AT91/AT32 LCD Controller
+ *
+ *  Data structure and register user interface
+ *
+ *  Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ATMEL_LCDC_H__
+#define __ATMEL_LCDC_H__
+
+#define ATMEL_LCDC_DMABADDR1	0x00
+#define ATMEL_LCDC_DMABADDR2	0x04
+#define ATMEL_LCDC_DMAFRMPT1	0x08
+#define ATMEL_LCDC_DMAFRMPT2	0x0c
+#define ATMEL_LCDC_DMAFRMADD1	0x10
+#define ATMEL_LCDC_DMAFRMADD2	0x14
+
+#define ATMEL_LCDC_DMAFRMCFG	0x18
+#define	ATMEL_LCDC_FRSIZE	(0x7fffff <<  0)
+#define	ATMEL_LCDC_BLENGTH_OFFSET	24
+#define	ATMEL_LCDC_BLENGTH	(0x7f     << ATMEL_LCDC_BLENGTH_OFFSET)
+
+#define ATMEL_LCDC_DMACON	0x1c
+#define	ATMEL_LCDC_DMAEN	(0x1 << 0)
+#define	ATMEL_LCDC_DMARST	(0x1 << 1)
+#define	ATMEL_LCDC_DMABUSY	(0x1 << 2)
+#define		ATMEL_LCDC_DMAUPDT	(0x1 << 3)
+#define		ATMEL_LCDC_DMA2DEN	(0x1 << 4)
+
+#define ATMEL_LCDC_DMA2DCFG	0x20
+#define		ATMEL_LCDC_ADDRINC_OFFSET	0
+#define		ATMEL_LCDC_ADDRINC		(0xffff)
+#define		ATMEL_LCDC_PIXELOFF_OFFSET	24
+#define		ATMEL_LCDC_PIXELOFF		(0x1f << 24)
+
+#define ATMEL_LCDC_LCDCON1	0x0800
+#define	ATMEL_LCDC_BYPASS	(1     <<  0)
+#define	ATMEL_LCDC_CLKVAL_OFFSET	12
+#define	ATMEL_LCDC_CLKVAL	(0x1ff << ATMEL_LCDC_CLKVAL_OFFSET)
+#define	ATMEL_LCDC_LINCNT	(0x7ff << 21)
+
+#define ATMEL_LCDC_LCDCON2	0x0804
+#define	ATMEL_LCDC_DISTYPE	(3 << 0)
+#define		ATMEL_LCDC_DISTYPE_STNMONO	(0 << 0)
+#define		ATMEL_LCDC_DISTYPE_STNCOLOR	(1 << 0)
+#define		ATMEL_LCDC_DISTYPE_TFT		(2 << 0)
+#define	ATMEL_LCDC_SCANMOD	(1 << 2)
+#define		ATMEL_LCDC_SCANMOD_SINGLE	(0 << 2)
+#define		ATMEL_LCDC_SCANMOD_DUAL		(1 << 2)
+#define	ATMEL_LCDC_IFWIDTH	(3 << 3)
+#define		ATMEL_LCDC_IFWIDTH_4		(0 << 3)
+#define		ATMEL_LCDC_IFWIDTH_8		(1 << 3)
+#define		ATMEL_LCDC_IFWIDTH_16		(2 << 3)
+#define	ATMEL_LCDC_PIXELSIZE	(7 << 5)
+#define		ATMEL_LCDC_PIXELSIZE_1		(0 << 5)
+#define		ATMEL_LCDC_PIXELSIZE_2		(1 << 5)
+#define		ATMEL_LCDC_PIXELSIZE_4		(2 << 5)
+#define		ATMEL_LCDC_PIXELSIZE_8		(3 << 5)
+#define		ATMEL_LCDC_PIXELSIZE_16		(4 << 5)
+#define		ATMEL_LCDC_PIXELSIZE_24		(5 << 5)
+#define		ATMEL_LCDC_PIXELSIZE_32		(6 << 5)
+#define	ATMEL_LCDC_INVVD	(1 << 8)
+#define		ATMEL_LCDC_INVVD_NORMAL		(0 << 8)
+#define		ATMEL_LCDC_INVVD_INVERTED	(1 << 8)
+#define	ATMEL_LCDC_INVFRAME	(1 << 9 )
+#define		ATMEL_LCDC_INVFRAME_NORMAL	(0 << 9)
+#define		ATMEL_LCDC_INVFRAME_INVERTED	(1 << 9)
+#define	ATMEL_LCDC_INVLINE	(1 << 10)
+#define		ATMEL_LCDC_INVLINE_NORMAL	(0 << 10)
+#define		ATMEL_LCDC_INVLINE_INVERTED	(1 << 10)
+#define	ATMEL_LCDC_INVCLK	(1 << 11)
+#define		ATMEL_LCDC_INVCLK_NORMAL	(0 << 11)
+#define		ATMEL_LCDC_INVCLK_INVERTED	(1 << 11)
+#define	ATMEL_LCDC_INVDVAL	(1 << 12)
+#define		ATMEL_LCDC_INVDVAL_NORMAL	(0 << 12)
+#define		ATMEL_LCDC_INVDVAL_INVERTED	(1 << 12)
+#define	ATMEL_LCDC_CLKMOD	(1 << 15)
+#define		ATMEL_LCDC_CLKMOD_ACTIVEDISPLAY	(0 << 15)
+#define		ATMEL_LCDC_CLKMOD_ALWAYSACTIVE	(1 << 15)
+#define	ATMEL_LCDC_MEMOR	(1 << 31)
+#define		ATMEL_LCDC_MEMOR_BIG		(0 << 31)
+#define		ATMEL_LCDC_MEMOR_LITTLE		(1 << 31)
+
+#define ATMEL_LCDC_TIM1		0x0808
+#define	ATMEL_LCDC_VFP		(0xffU <<  0)
+#define	ATMEL_LCDC_VBP_OFFSET		8
+#define	ATMEL_LCDC_VBP		(0xffU <<  ATMEL_LCDC_VBP_OFFSET)
+#define	ATMEL_LCDC_VPW_OFFSET		16
+#define	ATMEL_LCDC_VPW		(0x3fU << ATMEL_LCDC_VPW_OFFSET)
+#define	ATMEL_LCDC_VHDLY_OFFSET		24
+#define	ATMEL_LCDC_VHDLY	(0xfU  << ATMEL_LCDC_VHDLY_OFFSET)
+
+#define ATMEL_LCDC_TIM2		0x080c
+#define	ATMEL_LCDC_HBP		(0xffU  <<  0)
+#define	ATMEL_LCDC_HPW_OFFSET		8
+#define	ATMEL_LCDC_HPW		(0x3fU  <<  ATMEL_LCDC_HPW_OFFSET)
+#define	ATMEL_LCDC_HFP_OFFSET		21
+#define	ATMEL_LCDC_HFP		(0x7ffU << ATMEL_LCDC_HFP_OFFSET)
+
+#define ATMEL_LCDC_LCDFRMCFG	0x0810
+#define	ATMEL_LCDC_LINEVAL	(0x7ff <<  0)
+#define	ATMEL_LCDC_HOZVAL_OFFSET	21
+#define	ATMEL_LCDC_HOZVAL	(0x7ff << ATMEL_LCDC_HOZVAL_OFFSET)
+
+#define ATMEL_LCDC_FIFO		0x0814
+#define	ATMEL_LCDC_FIFOTH	(0xffff)
+
+#define ATMEL_LCDC_MVAL		0x0818
+
+#define ATMEL_LCDC_DP1_2	0x081c
+#define ATMEL_LCDC_DP4_7	0x0820
+#define ATMEL_LCDC_DP3_5	0x0824
+#define ATMEL_LCDC_DP2_3	0x0828
+#define ATMEL_LCDC_DP5_7	0x082c
+#define ATMEL_LCDC_DP3_4	0x0830
+#define ATMEL_LCDC_DP4_5	0x0834
+#define ATMEL_LCDC_DP6_7	0x0838
+#define	ATMEL_LCDC_DP1_2_VAL	(0xff)
+#define	ATMEL_LCDC_DP4_7_VAL	(0xfffffff)
+#define	ATMEL_LCDC_DP3_5_VAL	(0xfffff)
+#define	ATMEL_LCDC_DP2_3_VAL	(0xfff)
+#define	ATMEL_LCDC_DP5_7_VAL	(0xfffffff)
+#define	ATMEL_LCDC_DP3_4_VAL	(0xffff)
+#define	ATMEL_LCDC_DP4_5_VAL	(0xfffff)
+#define	ATMEL_LCDC_DP6_7_VAL	(0xfffffff)
+
+#define ATMEL_LCDC_PWRCON	0x083c
+#define	ATMEL_LCDC_PWR		(1    <<  0)
+#define	ATMEL_LCDC_GUARDT_OFFSET	1
+#define	ATMEL_LCDC_GUARDT	(0x7f <<  ATMEL_LCDC_GUARDT_OFFSET)
+#define	ATMEL_LCDC_BUSY		(1    << 31)
+
+#define ATMEL_LCDC_CONTRAST_CTR	0x0840
+#define	ATMEL_LCDC_PS		(3 << 0)
+#define		ATMEL_LCDC_PS_DIV1		(0 << 0)
+#define		ATMEL_LCDC_PS_DIV2		(1 << 0)
+#define		ATMEL_LCDC_PS_DIV4		(2 << 0)
+#define		ATMEL_LCDC_PS_DIV8		(3 << 0)
+#define	ATMEL_LCDC_POL		(1 << 2)
+#define		ATMEL_LCDC_POL_NEGATIVE		(0 << 2)
+#define		ATMEL_LCDC_POL_POSITIVE		(1 << 2)
+#define	ATMEL_LCDC_ENA		(1 << 3)
+#define		ATMEL_LCDC_ENA_PWMDISABLE	(0 << 3)
+#define		ATMEL_LCDC_ENA_PWMENABLE	(1 << 3)
+
+#define ATMEL_LCDC_CONTRAST_VAL	0x0844
+#define	ATMEL_LCDC_CVAL	(0xff)
+
+#define ATMEL_LCDC_IER		0x0848
+#define ATMEL_LCDC_IDR		0x084c
+#define ATMEL_LCDC_IMR		0x0850
+#define ATMEL_LCDC_ISR		0x0854
+#define ATMEL_LCDC_ICR		0x0858
+#define	ATMEL_LCDC_LNI		(1 << 0)
+#define	ATMEL_LCDC_LSTLNI	(1 << 1)
+#define	ATMEL_LCDC_EOFI		(1 << 2)
+#define	ATMEL_LCDC_UFLWI	(1 << 4)
+#define	ATMEL_LCDC_OWRI		(1 << 5)
+#define	ATMEL_LCDC_MERI		(1 << 6)
+
+#define ATMEL_LCDC_LUT(n)	(0x0c00 + ((n)*4))
+
+#endif /* __ATMEL_LCDC_H__ */
diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h
index c891fa8..342ce2a 100644
--- a/include/configs/at91cap9adk.h
+++ b/include/configs/at91cap9adk.h
@@ -28,6 +28,7 @@
 #define __CONFIG_H
 
 /* ARM asynchronous clock */
+#define AT91_CPU_NAME		"AT91CAP9"
 #define AT91_MAIN_CLOCK		200000000	/* from 12 MHz crystal */
 #define AT91_MASTER_CLOCK	100000000	/* peripheral = main / 2 */
 #define CFG_HZ			1000000		/* 1us resolution */
@@ -55,11 +56,19 @@
 #undef CONFIG_USART2
 #define CONFIG_USART3		1	/* USART 3 is DBGU */
 
-#define CONFIG_BOOTDELAY	3
-#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
-				"root=/dev/mtdblock1 rw rootfstype=jffs2"
+/* LCD */
+#define CONFIG_LCD			1
+#define LCD_BPP				LCD_COLOR8
+#define CONFIG_LCD_LOGO			1
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO			1
+#define CONFIG_LCD_INFO_BELOW_LOGO	1
+#define CFG_WHITE_ON_BLACK		1
+#define CONFIG_ATMEL_LCD		1
+#define CONFIG_ATMEL_LCD_BGR555		1
+#define CFG_CONSOLE_IS_IN_ENV		1
 
-/* #define CONFIG_ENV_OVERWRITE	1 */
+#define CONFIG_BOOTDELAY	3
 
 /*
  * BOOTP options
@@ -94,9 +103,9 @@
 #define CFG_SPI_WRITE_TOUT		(5*CFG_HZ)
 #define CFG_MAX_DATAFLASH_BANKS		1
 #define CFG_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
-#define AT91_SPI_CLK			20000000
-#define DATAFLASH_TCSS			(0xFA << 16)
-#define DATAFLASH_TCHS			(0x8 << 24)
+#define AT91_SPI_CLK			15000000
+#define DATAFLASH_TCSS			(0x1a << 16)
+#define DATAFLASH_TCHS			(0x1 << 24)
 
 /* NOR flash */
 #define CFG_FLASH_CFI			1
@@ -110,6 +119,7 @@
 #define NAND_MAX_CHIPS			1
 #define CFG_MAX_NAND_DEVICE		1
 #define CFG_NAND_BASE			0x40000000
+#define CFG_NAND_DBW_8			1
 
 /* Ethernet */
 #define CONFIG_MACB			1
@@ -143,7 +153,12 @@
 #define CFG_ENV_OFFSET		0x4200
 #define CFG_ENV_ADDR		(CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
 #define CFG_ENV_SIZE		0x4200
-#define CONFIG_BOOTCOMMAND	"cp.b 0xC003DE00 0x72000000 0x200040; bootm"
+#define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x72000000 0x210000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
+				"root=/dev/mtdblock1 "			\
+				"mtdparts=physmap-flash.0:-(nor);"	\
+				"at91_nand:-(root) "			\
+				"rw rootfstype=jffs2"
 
 #else
 
@@ -154,6 +169,12 @@
 #define CFG_ENV_ADDR		(PHYS_FLASH_1 + CFG_ENV_OFFSET)
 #define CFG_ENV_SIZE		0x4000
 #define CONFIG_BOOTCOMMAND	"cp.b 0x10040000 0x72000000 0x200000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
+				"root=/dev/mtdblock4 "			\
+				"mtdparts=physmap-flash.0:16k(bootstrap)ro,"\
+				"16k(env),224k(uboot)ro,-(linux);"	\
+				"at91_nand:-(root) "			\
+				"rw rootfstype=jffs2"
 
 #endif
 
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index 41c418f..675224e 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -56,10 +56,6 @@
 #define CONFIG_USART3		1	/* USART 3 is DBGU */
 
 #define CONFIG_BOOTDELAY	3
-#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
-				"root=/dev/mtdblock0 rw rootfstype=jffs2"
-
-/* #define CONFIG_ENV_OVERWRITE	1 */
 
 /*
  * BOOTP options
@@ -96,7 +92,7 @@
 #define CFG_MAX_DATAFLASH_BANKS		2
 #define CFG_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
 #define CFG_DATAFLASH_LOGIC_ADDR_CS1	0xD0000000	/* CS1 */
-#define AT91_SPI_CLK			33000000
+#define AT91_SPI_CLK			15000000
 #define DATAFLASH_TCSS			(0x1a << 16)
 #define DATAFLASH_TCHS			(0x1 << 24)
 
@@ -104,6 +100,7 @@
 #define NAND_MAX_CHIPS			1
 #define CFG_MAX_NAND_DEVICE		1
 #define CFG_NAND_BASE			0x40000000
+#define CFG_NAND_DBW_8			1
 
 /* NOR flash - no real flash on this board */
 #define CFG_NO_FLASH			1
@@ -142,7 +139,11 @@
 #define CFG_ENV_OFFSET		0x4200
 #define CFG_ENV_ADDR		(CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
 #define CFG_ENV_SIZE		0x4200
-#define CONFIG_BOOTCOMMAND	"cp.b 0xC003DE00 0x22000000 0x200040; bootm"
+#define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
+				"root=/dev/mtdblock0 "			\
+				"mtdparts=at91_nand:-(root) "		\
+				"rw rootfstype=jffs2"
 
 #elif CFG_USE_DATAFLASH_CS1
 
@@ -152,7 +153,11 @@
 #define CFG_ENV_OFFSET		0x4200
 #define CFG_ENV_ADDR		(CFG_DATAFLASH_LOGIC_ADDR_CS1 + CFG_ENV_OFFSET)
 #define CFG_ENV_SIZE		0x4200
-#define CONFIG_BOOTCOMMAND	"cp.b 0xD003DE00 0x22000000 0x200040; bootm"
+#define CONFIG_BOOTCOMMAND	"cp.b 0xD0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
+				"root=/dev/mtdblock0 "			\
+				"mtdparts=at91_nand:-(root) "		\
+				"rw rootfstype=jffs2"
 
 #else /* CFG_USE_NANDFLASH */
 
@@ -162,6 +167,12 @@
 #define CFG_ENV_OFFSET_REDUND	0x80000
 #define CFG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
+				"root=/dev/mtdblock5 "			\
+				"mtdparts=at91_nand:128k(bootstrap)ro,"	\
+				"256k(uboot)ro,128k(env1)ro,"		\
+				"128k(env2)ro,2M(linux),-(root) "	\
+				"rw rootfstype=jffs2"
 
 #endif
 
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
new file mode 100644
index 0000000..e53a23f
--- /dev/null
+++ b/include/configs/at91sam9261ek.h
@@ -0,0 +1,202 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * Configuation settings for the AT91SAM9261EK board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* ARM asynchronous clock */
+#define AT91_CPU_NAME		"AT91SAM9261"
+#define AT91_MAIN_CLOCK		198656000	/* from 18.432 MHz crystal */
+#define AT91_MASTER_CLOCK	99328000	/* peripheral = main / 2 */
+#define CFG_HZ			1000000		/* 1us resolution */
+
+#define AT91_SLOW_CLOCK		32768	/* slow clock */
+
+#define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
+#define CONFIG_AT91SAM9261	1	/* It's an Atmel AT91SAM9261 SoC*/
+#define CONFIG_AT91SAM9261EK	1	/* on an AT91SAM9261EK Board	*/
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
+
+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG	1
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_ATMEL_USART	1
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3		1	/* USART 3 is DBGU */
+
+/* LCD */
+#define CONFIG_LCD			1
+#define LCD_BPP				LCD_COLOR8
+#define CONFIG_LCD_LOGO			1
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO			1
+#define CONFIG_LCD_INFO_BELOW_LOGO	1
+#define CFG_WHITE_ON_BLACK		1
+#define CONFIG_ATMEL_LCD		1
+#define CONFIG_ATMEL_LCD_BGR555		1
+#define CFG_CONSOLE_IS_IN_ENV		1
+
+#define CONFIG_BOOTDELAY	3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE	1
+#define CONFIG_BOOTP_BOOTPATH		1
+#define CONFIG_BOOTP_GATEWAY		1
+#define CONFIG_BOOTP_HOSTNAME		1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_CMD_PING		1
+#define CONFIG_CMD_DHCP		1
+#define CONFIG_CMD_NAND		1
+#define CONFIG_CMD_USB		1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM			0x20000000
+#define PHYS_SDRAM_SIZE			0x04000000	/* 64 megs */
+
+/* DataFlash */
+#define CONFIG_HAS_DATAFLASH		1
+#define CFG_SPI_WRITE_TOUT		(5*CFG_HZ)
+#define CFG_MAX_DATAFLASH_BANKS		2
+#define CFG_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
+#define CFG_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* CS3 */
+#define AT91_SPI_CLK			15000000
+#define DATAFLASH_TCSS			(0x1a << 16)
+#define DATAFLASH_TCHS			(0x1 << 24)
+
+/* NAND flash */
+#define NAND_MAX_CHIPS			1
+#define CFG_MAX_NAND_DEVICE		1
+#define CFG_NAND_BASE			0x40000000
+#define CFG_NAND_DBW_8			1
+
+/* NOR flash - no real flash on this board */
+#define CFG_NO_FLASH			1
+
+/* Ethernet */
+#define CONFIG_DRIVER_DM9000		1
+#define CONFIG_DM9000_BASE		0x30000000
+#define DM9000_IO			CONFIG_DM9000_BASE
+#define DM9000_DATA			(CONFIG_DM9000_BASE + 4)
+#define CONFIG_DM9000_USE_16BIT		1
+#define CONFIG_NET_RETRY_COUNT		20
+#define CONFIG_RESET_PHY_R		1
+
+/* USB */
+#define CONFIG_USB_OHCI_NEW		1
+#define LITTLEENDIAN			1
+#define CONFIG_DOS_PARTITION		1
+#define CFG_USB_OHCI_CPU_INIT		1
+#define CFG_USB_OHCI_REGS_BASE		0x00500000	/* AT91SAM9261_UHP_BASE */
+#define CFG_USB_OHCI_SLOT_NAME		"at91sam9261"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS	2
+#define CONFIG_USB_STORAGE		1
+
+#define CFG_LOAD_ADDR			0x22000000	/* load address */
+
+#define CFG_MEMTEST_START		PHYS_SDRAM
+#define CFG_MEMTEST_END			0x23e00000
+
+#define CFG_USE_DATAFLASH_CS0		1
+#undef CFG_USE_NANDFLASH
+
+#ifdef CFG_USE_DATAFLASH_CS0
+
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
+#define CFG_ENV_IS_IN_DATAFLASH	1
+#define CFG_MONITOR_BASE	(CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+#define CFG_ENV_OFFSET		0x4200
+#define CFG_ENV_ADDR		(CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
+#define CFG_ENV_SIZE		0x4200
+#define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
+				"root=/dev/mtdblock0 "			\
+				"mtdparts=at91_nand:-(root) "		\
+				"rw rootfstype=jffs2"
+
+#else /* CFG_USE_NANDFLASH */
+
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CFG_ENV_IS_IN_NAND	1
+#define CFG_ENV_OFFSET		0x60000
+#define CFG_ENV_OFFSET_REDUND	0x80000
+#define CFG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
+				"root=/dev/mtdblock5 "			\
+				"mtdparts=at91_nand:128k(bootstrap)ro,"	\
+				"256k(uboot)ro,128k(env1)ro,"		\
+				"128k(env2)ro,2M(linux),-(root) "	\
+				"rw rootfstype=jffs2"
+
+#endif
+
+#define CONFIG_BAUDRATE		115200
+#define CFG_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
+
+#define CFG_PROMPT		"U-Boot> "
+#define CFG_CBSIZE		256
+#define CFG_MAXARGS		16
+#define CFG_PBSIZE		(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP		1
+#define CONFIG_CMDLINE_EDITING	1
+
+#define ROUND(A, B)		(((A) + (B)) & ~((B) - 1))
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN		ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000)
+#define CFG_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
new file mode 100644
index 0000000..a8194b5
--- /dev/null
+++ b/include/configs/at91sam9263ek.h
@@ -0,0 +1,206 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * Configuation settings for the AT91SAM9263EK board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* ARM asynchronous clock */
+#define AT91_CPU_NAME		"AT91SAM9263"
+#define AT91_MAIN_CLOCK		199919000	/* from 16.367 MHz crystal */
+#define AT91_MASTER_CLOCK	99959500	/* peripheral = main / 2 */
+#define CFG_HZ			1000000		/* 1us resolution */
+
+#define AT91_SLOW_CLOCK		32768	/* slow clock */
+
+#define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
+#define CONFIG_AT91SAM9263	1	/* It's an Atmel AT91SAM9263 SoC*/
+#define CONFIG_AT91SAM9263EK	1	/* on an AT91SAM9263EK Board	*/
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
+
+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG	1
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_ATMEL_USART	1
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3		1	/* USART 3 is DBGU */
+
+/* LCD */
+#define CONFIG_LCD			1
+#define LCD_BPP				LCD_COLOR8
+#define CONFIG_LCD_LOGO			1
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO			1
+#define CONFIG_LCD_INFO_BELOW_LOGO	1
+#define CFG_WHITE_ON_BLACK		1
+#define CONFIG_ATMEL_LCD		1
+#define CONFIG_ATMEL_LCD_BGR555		1
+#define CFG_CONSOLE_IS_IN_ENV		1
+
+#define CONFIG_BOOTDELAY	3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE	1
+#define CONFIG_BOOTP_BOOTPATH		1
+#define CONFIG_BOOTP_GATEWAY		1
+#define CONFIG_BOOTP_HOSTNAME		1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_CMD_PING		1
+#define CONFIG_CMD_DHCP		1
+#define CONFIG_CMD_NAND		1
+#define CONFIG_CMD_USB		1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM			0x20000000
+#define PHYS_SDRAM_SIZE			0x04000000	/* 64 megs */
+
+/* DataFlash */
+#define CONFIG_HAS_DATAFLASH		1
+#define CFG_SPI_WRITE_TOUT		(5*CFG_HZ)
+#define CFG_MAX_DATAFLASH_BANKS		1
+#define CFG_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
+#define AT91_SPI_CLK			15000000
+#define DATAFLASH_TCSS			(0x1a << 16)
+#define DATAFLASH_TCHS			(0x1 << 24)
+
+/* NOR flash, if populated */
+#if 1
+#define CFG_NO_FLASH			1
+#else
+#define CFG_FLASH_CFI			1
+#define CFG_FLASH_CFI_DRIVER		1
+#define PHYS_FLASH_1			0x10000000
+#define CFG_FLASH_BASE			PHYS_FLASH_1
+#define CFG_MAX_FLASH_SECT		256
+#define CFG_MAX_FLASH_BANKS		1
+#endif
+
+/* NAND flash */
+#define NAND_MAX_CHIPS			1
+#define CFG_MAX_NAND_DEVICE		1
+#define CFG_NAND_BASE			0x40000000
+#define CFG_NAND_DBW_8			1
+
+/* Ethernet */
+#define CONFIG_MACB			1
+#define CONFIG_RMII			1
+#define CONFIG_NET_MULTI		1
+#define CONFIG_NET_RETRY_COUNT		20
+#define CONFIG_RESET_PHY_R		1
+
+/* USB */
+#define CONFIG_USB_OHCI_NEW		1
+#define LITTLEENDIAN			1
+#define CONFIG_DOS_PARTITION		1
+#define CFG_USB_OHCI_CPU_INIT		1
+#define CFG_USB_OHCI_REGS_BASE		0x00a00000	/* AT91SAM9263_UHP_BASE */
+#define CFG_USB_OHCI_SLOT_NAME		"at91sam9263"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS	2
+#define CONFIG_USB_STORAGE		1
+
+#define CFG_LOAD_ADDR			0x22000000	/* load address */
+
+#define CFG_MEMTEST_START		PHYS_SDRAM
+#define CFG_MEMTEST_END			0x23e00000
+
+#define CFG_USE_DATAFLASH		1
+#undef CFG_USE_NANDFLASH
+
+#ifdef CFG_USE_DATAFLASH
+
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
+#define CFG_ENV_IS_IN_DATAFLASH	1
+#define CFG_MONITOR_BASE	(CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+#define CFG_ENV_OFFSET		0x4200
+#define CFG_ENV_ADDR		(CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
+#define CFG_ENV_SIZE		0x4200
+#define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
+				"root=/dev/mtdblock0 " \
+				"mtdparts=at91_nand:-(root) "\
+				"rw rootfstype=jffs2"
+
+#else /* CFG_USE_NANDFLASH */
+
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CFG_ENV_IS_IN_NAND	1
+#define CFG_ENV_OFFSET		0x60000
+#define CFG_ENV_OFFSET_REDUND	0x80000
+#define CFG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
+				"root=/dev/mtdblock5 " \
+				"mtdparts=at91_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
+				"rw rootfstype=jffs2"
+
+#endif
+
+#define CONFIG_BAUDRATE		115200
+#define CFG_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
+
+#define CFG_PROMPT		"U-Boot> "
+#define CFG_CBSIZE		256
+#define CFG_MAXARGS		16
+#define CFG_PBSIZE		(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP		1
+#define CONFIG_CMDLINE_EDITING	1
+
+#define ROUND(A, B)		(((A) + (B)) & ~((B) - 1))
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN		ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000)
+#define CFG_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
new file mode 100644
index 0000000..2ad8d05
--- /dev/null
+++ b/include/configs/at91sam9rlek.h
@@ -0,0 +1,175 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * Configuation settings for the AT91SAM9RLEK board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* ARM asynchronous clock */
+#define AT91_CPU_NAME		"AT91SAM9RL"
+#define AT91_MAIN_CLOCK		200000000	/* from 12.000 MHz crystal */
+#define AT91_MASTER_CLOCK	100000000	/* peripheral = main / 2 */
+#define CFG_HZ			1000000		/* 1us resolution */
+
+#define AT91_SLOW_CLOCK		32768	/* slow clock */
+
+#define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
+#define CONFIG_AT91SAM9RL	1	/* It's an Atmel AT91SAM9RL SoC*/
+#define CONFIG_AT91SAM9RLEK	1	/* on an AT91SAM9RLEK Board	*/
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
+
+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG	1
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_ATMEL_USART	1
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3		1	/* USART 3 is DBGU */
+
+/* LCD */
+#define CONFIG_LCD			1
+#define LCD_BPP				LCD_COLOR8
+#define CONFIG_LCD_LOGO			1
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO			1
+#define CONFIG_LCD_INFO_BELOW_LOGO	1
+#define CFG_WHITE_ON_BLACK		1
+#define CONFIG_ATMEL_LCD		1
+#define CONFIG_ATMEL_LCD_RGB565		1
+#define CFG_CONSOLE_IS_IN_ENV		1
+
+#define CONFIG_BOOTDELAY	3
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_USB
+
+#define CONFIG_CMD_NAND		1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM			0x20000000
+#define PHYS_SDRAM_SIZE			0x04000000	/* 64 megs */
+
+/* DataFlash */
+#define CONFIG_HAS_DATAFLASH		1
+#define CFG_SPI_WRITE_TOUT		(5*CFG_HZ)
+#define CFG_MAX_DATAFLASH_BANKS		1
+#define CFG_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
+#define AT91_SPI_CLK			15000000
+#define DATAFLASH_TCSS			(0x1a << 16)
+#define DATAFLASH_TCHS			(0x1 << 24)
+
+/* NOR flash - not present */
+#define CFG_NO_FLASH			1
+
+/* NAND flash */
+#define NAND_MAX_CHIPS			1
+#define CFG_MAX_NAND_DEVICE		1
+#define CFG_NAND_BASE			0x40000000
+#define CFG_NAND_DBW_8			1
+
+/* Ethernet - not present */
+
+/* USB - not supported */
+
+#define CFG_LOAD_ADDR			0x22000000	/* load address */
+
+#define CFG_MEMTEST_START		PHYS_SDRAM
+#define CFG_MEMTEST_END			0x23e00000
+
+#define CFG_USE_DATAFLASH		1
+#undef CFG_USE_NANDFLASH
+
+#ifdef CFG_USE_DATAFLASH
+
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
+#define CFG_ENV_IS_IN_DATAFLASH	1
+#define CFG_MONITOR_BASE	(CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+#define CFG_ENV_OFFSET		0x4200
+#define CFG_ENV_ADDR		(CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
+#define CFG_ENV_SIZE		0x4200
+#define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
+				"root=/dev/mtdblock0 " \
+				"mtdparts=at91_nand:-(root) "\
+				"rw rootfstype=jffs2"
+
+#else /* CFG_USE_NANDFLASH */
+
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CFG_ENV_IS_IN_NAND	1
+#define CFG_ENV_OFFSET		0x60000
+#define CFG_ENV_OFFSET_REDUND	0x80000
+#define CFG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
+				"root=/dev/mtdblock5 " \
+				"mtdparts=at91_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
+				"rw rootfstype=jffs2"
+
+#endif
+
+#define CONFIG_BAUDRATE		115200
+#define CFG_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
+
+#define CFG_PROMPT		"U-Boot> "
+#define CFG_CBSIZE		256
+#define CFG_MAXARGS		16
+#define CFG_PBSIZE		(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP		1
+#define CONFIG_CMDLINE_EDITING	1
+
+#define ROUND(A, B)		(((A) + (B)) & ~((B) - 1))
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN		ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000)
+#define CFG_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
diff --git a/include/lcd.h b/include/lcd.h
index 8a4273c..44ac8ef 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -155,7 +155,35 @@ typedef struct vidinfo {
 
 	u_char	vl_bpix;	/* Bits per pixel, 0 = 1 */
 } vidinfo_t;
-#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 */
+
+#elif defined(CONFIG_ATMEL_LCD)
+
+typedef struct vidinfo {
+	u_long vl_col;		/* Number of columns (i.e. 640) */
+	u_long vl_row;		/* Number of rows (i.e. 480) */
+	u_long vl_clk;	/* pixel clock in ps    */
+
+	/* LCD configuration register */
+	u_long vl_sync;		/* Horizontal / vertical sync */
+	u_long vl_bpix;		/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
+	u_long vl_tft;		/* 0 = passive, 1 = TFT */
+
+	/* Horizontal control register. */
+	u_long vl_hsync_len;	/* Length of horizontal sync */
+	u_long vl_left_margin;	/* Time from sync to picture */
+	u_long vl_right_margin;	/* Time from picture to sync */
+
+	/* Vertical control register. */
+	u_long vl_vsync_len;	/* Length of vertical sync */
+	u_long vl_upper_margin;	/* Time from sync to picture */
+	u_long vl_lower_margin;	/* Time from picture to sync */
+
+	u_long	mmio;		/* Memory mapped registers */
+} vidinfo_t;
+
+extern vidinfo_t panel_info;
+
+#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 or CONFIG_ATMEL_LCD */
 
 /* Video functions */