Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq

7 files changed, 52 insertions, 4 deletions

diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index 54968b5..a7d49ed 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -257,8 +257,13 @@
 
 #define CONFIG_BOOTARGS			"console=ttyS0,115200 root=/dev/ram0 " \
 					"earlycon=uart8250,mmio,0x21c0500"
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#define CONFIG_BOOTCOMMAND		"sf probe && sf read $kernel_load "    \
+					"e0000 f00000 && bootm $kernel_load"
+#else
 #define CONFIG_BOOTCOMMAND		"cp.b $kernel_start $kernel_load "     \
 					"$kernel_size && bootm $kernel_load"
+#endif
 #define CONFIG_BOOTDELAY		10
 
 /* Monitor Command Prompt */
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index 6d35be2..aca8d95 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -253,6 +253,7 @@
 #define CONFIG_PHY_VITESSE
 #define CONFIG_PHY_REALTEK
 #define CONFIG_PHY_AQUANTIA
+#define AQR105_IRQ_MASK			0x40000000
 
 #define RGMII_PHY1_ADDR			0x1
 #define RGMII_PHY2_ADDR			0x2
@@ -285,6 +286,27 @@
 #define CONFIG_USB_STORAGE
 #endif
 
+/* SATA */
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_CMD_SCSI
+#ifndef CONFIG_CMD_FAT
+#define CONFIG_CMD_FAT
+#endif
+#ifndef CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT2
+#endif
+#define CONFIG_DOS_PARTITION
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID		2
+#define CONFIG_SYS_SCSI_MAX_LUN			2
+#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+						CONFIG_SYS_SCSI_MAX_LUN)
+#define SCSI_VEND_ID 0x1b4b
+#define SCSI_DEV_ID  0x9170
+#define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID}
+#define CONFIG_PCI
+
 #include <asm/fsl_secure_boot.h>
 
 #endif /* __LS1043ARDB_H__ */
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index a3aad1b..c78aeb5 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -26,6 +26,8 @@
 /* We need architecture specific misc initializations */
 #define CONFIG_ARCH_MISC_INIT
 
+#define CONFIG_FSL_CAAM			/* Enable SEC/CAAM */
+
 /* Link Definitions */
 #ifdef CONFIG_SPL
 #define CONFIG_SYS_TEXT_BASE		0x80400000
@@ -292,4 +294,10 @@ unsigned long long get_qixis_addr(void);
 
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
+/* Hash command with SHA acceleration supported in hardware */
+#ifdef CONFIG_FSL_CAAM
+#define CONFIG_CMD_HASH
+#define CONFIG_SHA_HW_ACCEL
+#endif
+
 #endif /* __LS2_COMMON_H */
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index f8c9e51..4b27114 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -374,7 +374,7 @@ unsigned long get_board_ddr_clk(void);
 #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf
 
 #define CONFIG_MII		/* MII PHY management */
-#define CONFIG_ETHPRIME		"DPNI1"
+#define CONFIG_ETHPRIME		"DPMAC1@xgmii"
 #define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */
 
 #endif
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 4577919..3baca64 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -366,7 +366,7 @@ unsigned long get_board_sys_clk(void);
 #define AQR405_IRQ_MASK		0x36
 
 #define CONFIG_MII
-#define CONFIG_ETHPRIME		"DPNI1"
+#define CONFIG_ETHPRIME		"DPMAC1@xgmii"
 #define CONFIG_PHY_GIGE
 #define CONFIG_PHY_AQUANTIA
 #endif
diff --git a/include/fsl_ddr_sdram.h b/include/fsl_ddr_sdram.h
index cf316a4..486e47e 100644
--- a/include/fsl_ddr_sdram.h
+++ b/include/fsl_ddr_sdram.h
@@ -146,6 +146,10 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
 #define WR_DATA_DELAY_SHIFT	10
 #endif
 
+/* DDR_EOR register */
+#define DDR_EOR_RD_REOD_DIS	0x07000000
+#define DDR_EOR_WD_REOD_DIS	0x00100000
+
 /* DDR_MD_CNTL */
 #define MD_CNTL_MD_EN		0x80000000
 #define MD_CNTL_CS_SEL_CS0	0x00000000
@@ -185,6 +189,13 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
 #define DDR_MR5_CA_PARITY_LAT_4_CLK	0x1 /* for DDR4-1600/1866/2133 */
 #define DDR_MR5_CA_PARITY_LAT_5_CLK	0x2 /* for DDR4-2400 */
 
+/* DEBUG_26 register */
+#define DDR_CAS_TO_PRE_SUB_MASK  0x0000f000 /* CAS to preamble subtract value */
+#define DDR_CAS_TO_PRE_SUB_SHIFT 12
+
+/* DEBUG_29 register */
+#define DDR_TX_BD_DIS	(1 << 10) /* Transmit Bit Deskew Disable */
+
 
 #if (defined(CONFIG_SYS_FSL_DDR_VER) && \
 	(CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7))
diff --git a/include/fsl_sec.h b/include/fsl_sec.h
index a52110a..bffabc8 100644
--- a/include/fsl_sec.h
+++ b/include/fsl_sec.h
@@ -294,8 +294,6 @@ struct sg_entry {
 
 #endif
 
-int sec_init(void);
-
 /* blob_dek:
  * Encapsulates the src in a secure blob and stores it dst
  * @src: reference to the plaintext
@@ -305,6 +303,10 @@ int sec_init(void);
  */
 int blob_dek(const u8 *src, u8 *dst, u8 len);
 
+#if defined(CONFIG_PPC_C29X)
+int sec_init_idx(uint8_t);
+#endif
+int sec_init(void);
 #endif
 
 #endif /* __FSL_SEC_H */