Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx

7 files changed, 86 insertions, 26 deletions

diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h
index f64748e..796f330 100644
--- a/include/configs/km/keymile-common.h
+++ b/include/configs/km/keymile-common.h
@@ -148,6 +148,14 @@
 	"ubi part " CONFIG_KM_UBI_PARTITION_NAME_APP "; fi\0"
 #endif /* CONFIG_KM_UBI_PARTITION_NAME_APP */
 
+#ifdef CONFIG_NAND_ECC_BCH
+#define CONFIG_KM_UIMAGE_NAME "ecc_bch_uImage\0"
+#define CONFIG_KM_ECC_MODE    " eccmode=bch"
+#else
+#define CONFIG_KM_UIMAGE_NAME "uImage\0"
+#define CONFIG_KM_ECC_MODE
+#endif
+
 /*
  * boottargets
  * - set 'subbootcmds'
@@ -184,6 +192,7 @@
 		":${hostname}:${netdev}:off3"				\
 		" console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}"	\
 		" mem=${kernelmem} init=${init}"			\
+		CONFIG_KM_ECC_MODE					\
 		" phram.phram=phvar,${varaddr}," __stringify(CONFIG_KM_PHRAM)\
 		" " CONFIG_KM_UBI_LINUX_MTD " "				\
 		CONFIG_KM_DEF_BOOT_ARGS_CPU				\
@@ -210,9 +219,10 @@
  */
 #define CONFIG_KM_DEF_ENV_FLASH_BOOT					\
 	"cramfsaddr=" __stringify(CONFIG_KM_CRAMFS_ADDR) "\0"		\
-	"cramfsloadkernel=cramfsload ${load_addr_r} uImage\0"		\
+	"cramfsloadkernel=cramfsload ${load_addr_r} ${uimage}\0"	\
 	"ubicopy=ubi read "__stringify(CONFIG_KM_CRAMFS_ADDR)		\
 			" bootfs${boot_bank}\0"				\
+	"uimage=" CONFIG_KM_UIMAGE_NAME					\
 	CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI
 
 /*
diff --git a/include/configs/km/km8309-common.h b/include/configs/km/km8309-common.h
index b36e892..7f9cffa 100644
--- a/include/configs/km/km8309-common.h
+++ b/include/configs/km/km8309-common.h
@@ -22,7 +22,7 @@
 #define CONFIG_MPC830x		1	/* MPC830x family */
 #define CONFIG_MPC8309		1	/* MPC8309 CPU specific */
 
-#define CONFIG_KM_DEF_ARCH	"arch=ppc_8xx\0"
+#define CONFIG_KM_DEF_ARCH	"arch=ppc_82xx\0"
 #define CONFIG_CMD_DIAG		1
 
 /* include common defines/options for all 83xx Keymile boards */
@@ -33,8 +33,6 @@
 /* at end of uboot partition, before env */
 #define CONFIG_SYS_QE_FMAN_FW_ADDR   0xF00B0000
 
-#define CONFIG_MISC_INIT_R
-
 /*
  * System IO Config
  */
diff --git a/include/configs/km/km8321-common.h b/include/configs/km/km8321-common.h
index 8ad6fc3..abb9081 100644
--- a/include/configs/km/km8321-common.h
+++ b/include/configs/km/km8321-common.h
@@ -38,8 +38,6 @@
 /* include common defines/options for all 83xx Keymile boards */
 #include "km83xx-common.h"
 
-#define CONFIG_MISC_INIT_R
-
 /*
  * System IO Config
  */
diff --git a/include/configs/km/km83xx-common.h b/include/configs/km/km83xx-common.h
index a9823d6..eb0e5b6 100644
--- a/include/configs/km/km83xx-common.h
+++ b/include/configs/km/km83xx-common.h
@@ -165,19 +165,15 @@
 #define CONFIG_UEC_ETH
 #define CONFIG_ETHPRIME		"UEC0"
 
+#if !defined(CONFIG_MPC8309)
 #define CONFIG_UEC_ETH1		/* GETH1 */
 #define UEC_VERBOSE_DEBUG	1
+#endif
 
 #ifdef CONFIG_UEC_ETH1
-#if defined(CONFIG_MPC8309)
-#define CONFIG_SYS_UEC1_UCC_NUM	2	/* UCC3 */
-#define CONFIG_SYS_UEC1_RX_CLK		QE_CLK_NONE /* not used in RMII Mode */
-#define CONFIG_SYS_UEC1_TX_CLK		QE_CLK12
-#else
 #define CONFIG_SYS_UEC1_UCC_NUM	3	/* UCC4 */
 #define CONFIG_SYS_UEC1_RX_CLK		QE_CLK_NONE /* not used in RMII Mode */
 #define CONFIG_SYS_UEC1_TX_CLK		QE_CLK17
-#endif
 #define CONFIG_SYS_UEC1_ETH_TYPE	FAST_ETH
 #define CONFIG_SYS_UEC1_PHY_ADDR	0
 #define CONFIG_SYS_UEC1_INTERFACE_TYPE	PHY_INTERFACE_MODE_RMII
@@ -316,7 +312,6 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	CONFIG_KM_DEF_ENV						\
 	CONFIG_KM_DEF_ARCH						\
-	"dtt_bus=pca9547:70:a\0"					\
 	"EEprom_ivm=pca9547:70:9\0"					\
 	"newenv="							\
 		"prot off 0xF00C0000 +0x40000 && "			\
diff --git a/include/configs/km8360.h b/include/configs/km8360.h
index 7631ab6..5b191bc 100644
--- a/include/configs/km8360.h
+++ b/include/configs/km8360.h
@@ -25,6 +25,8 @@
 #define CONFIG_KM_BOARD_NAME	"kmcoge5ne"
 #define CONFIG_KM_DEF_NETDEV	"netdev=eth1\0"
 #define CONFIG_CMD_NAND
+#define CONFIG_NAND_ECC_BCH
+#define CONFIG_BCH
 #define CONFIG_NAND_KMETER1
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define NAND_MAX_CHIPS				1
diff --git a/include/configs/suvd3.h b/include/configs/suvd3.h
index c50832c..bbf9da5 100644
--- a/include/configs/suvd3.h
+++ b/include/configs/suvd3.h
@@ -110,4 +110,41 @@
 				 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 #define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
 
+/*
+ * QE UEC ethernet configuration
+ */
+#if defined(CONFIG_KMVECT1)
+#define CONFIG_MV88E6352_SWITCH
+#define CONFIG_KM_MVEXTSW_ADDR		0x10
+
+/* ethernet port connected to simple switch 88e6122 (UEC0) */
+#define CONFIG_UEC_ETH1
+#define CONFIG_SYS_UEC1_UCC_NUM		0	/* UCC1 */
+#define CONFIG_SYS_UEC1_RX_CLK		QE_CLK9
+#define CONFIG_SYS_UEC1_TX_CLK		QE_CLK10
+
+#define CONFIG_FIXED_PHY		0xFFFFFFFF
+#define CONFIG_SYS_FIXED_PHY_ADDR	0x1E	/* unused address */
+#define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \
+		{devnum, speed, duplex}
+#define CONFIG_SYS_FIXED_PHY_PORTS \
+		CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL)
+
+#define CONFIG_SYS_UEC1_ETH_TYPE	FAST_ETH
+#define CONFIG_SYS_UEC1_PHY_ADDR	CONFIG_SYS_FIXED_PHY_ADDR
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE	PHY_INTERFACE_MODE_MII
+#define CONFIG_SYS_UEC1_INTERFACE_SPEED	100
+
+/* ethernet port connected to piggy (UEC2) */
+#define CONFIG_HAS_ETH1
+#define CONFIG_UEC_ETH2
+#define CONFIG_SYS_UEC2_UCC_NUM		2       /* UCC3 */
+#define CONFIG_SYS_UEC2_RX_CLK		QE_CLK_NONE /* not used in RMII Mode */
+#define CONFIG_SYS_UEC2_TX_CLK		QE_CLK12
+#define CONFIG_SYS_UEC2_ETH_TYPE	FAST_ETH
+#define CONFIG_SYS_UEC2_PHY_ADDR	0
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE	PHY_INTERFACE_MODE_RMII
+#define CONFIG_SYS_UEC2_INTERFACE_SPEED	100
+#endif /* CONFIG_KMVECT1 */
+
 #endif /* __CONFIG_H */
diff --git a/include/configs/tuxx1.h b/include/configs/tuxx1.h
index 90d2e61..6caf23a 100644
--- a/include/configs/tuxx1.h
+++ b/include/configs/tuxx1.h
@@ -11,7 +11,7 @@
  * (C) Copyright 2008
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
- * (C) Copyright 2010-2012
+ * (C) Copyright 2010-2013
  * Lukas Roggli, KEYMILE Ltd, lukas.roggli@keymile.com
  * Holger Brunck,  Keymile GmbH, holger.bruncl@keymile.com
  *
@@ -27,16 +27,20 @@
 /*
  * High Level Configuration Options
  */
-#ifdef CONFIG_KMSUPX5
+#if defined(CONFIG_KMSUPX5)
 #define CONFIG_KM_BOARD_NAME	"kmsupx5"
 #define CONFIG_HOSTNAME		kmsupx5
-#elif defined CONFIG_TUGE1
+#elif defined(CONFIG_TUGE1)
 #define CONFIG_KM_BOARD_NAME	"tuge1"
 #define CONFIG_HOSTNAME		tuge1
-#else
-#define CONFIG_TUXXX		/* TUXX1 board (tuxa1/tuda1) specific */
+#elif defined(CONFIG_TUXX1)	/* TUXX1 board (tuxa1/tuda1) specific */
 #define CONFIG_KM_BOARD_NAME	"tuxx1"
 #define CONFIG_HOSTNAME		tuxx1
+#elif defined(CONFIG_KMOPTI2)
+#define CONFIG_KM_BOARD_NAME	"kmopti2"
+#define CONFIG_HOSTNAME		kmopti2
+#else
+#error ("Board not supported")
 #endif
 
 #define	CONFIG_SYS_TEXT_BASE	0xF0000000
@@ -46,18 +50,18 @@
 
 #define CONFIG_SYS_APP1_BASE	0xA0000000    /* PAXG */
 #define	CONFIG_SYS_APP1_SIZE	256 /* Megabytes */
-#ifndef CONFIG_KM_DISABLE_APP2
+#if defined(CONFIG_TUXX1) || defined(CONFIG_KMOPTI2)
 #define CONFIG_SYS_APP2_BASE	0xB0000000    /* PINC3 */
 #define	CONFIG_SYS_APP2_SIZE	256 /* Megabytes */
 #endif
 
 /*
  * Init Local Bus Memory Controller:
- *
- * Bank Bus     Machine PortSz  Size  Device on TUDA1  TUXA1  TUGE1   KMSUPX4
- * ---- ---     ------- ------  -----  ---------------------------------------
- *  2   Local   GPCM    8 bit  256MB	         PAXG  LPXF   PAXI     LPXF
- *  3   Local   GPCM    8 bit  256MB	         PINC3 PINC2  unused   unused
+ *				      Device on
+ * Bank Bus     Machine PortSz  Size  TUDA1  TUXA1  TUGE1  KMSUPX4 KMOPTI2
+ * ---- ---     ------- ------  ----- ---------------------------------------
+ *  2   Local   GPCM    8 bit  256MB  PAXG  LPXF   PAXI     LPXF   PAXE
+ *  3   Local   GPCM    8 bit  256MB  PINC3 PINC2  unused  unused  OPI2(16 bit)
  *
  */
 
@@ -81,7 +85,7 @@
 				 OR_GPCM_TRLX_SET | \
 				 OR_GPCM_EHTR_CLEAR | \
 				 OR_GPCM_EAD)
-#ifndef CONFIG_KM_DISABLE_APP2
+#if defined(CONFIG_TUXX1)
 /*
  * Configuration for C3 on the local bus
  */
@@ -107,6 +111,22 @@
 				 MxMR_WLFx_2X)
 #endif
 
+#if defined(CONFIG_KMOPTI2)
+/*
+ * Configuration for C3 on the local bus
+ */
+#define CONFIG_SYS_LBLAWBAR3_PRELIM	CONFIG_SYS_APP2_BASE
+#define CONFIG_SYS_LBLAWAR3_PRELIM	(LBLAWAR_EN | LBLAWAR_256MB)
+#define CONFIG_SYS_BR3_PRELIM	(CONFIG_SYS_APP2_BASE | \
+				 BR_PS_16 |		\
+				 BR_MS_GPCM |		\
+				 BR_V)
+#define CONFIG_SYS_OR3_PRELIM	(MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \
+				 OR_GPCM_SCY_4 | \
+				 OR_GPCM_TRLX_CLEAR | \
+				 OR_GPCM_EHTR_CLEAR)
+#endif
+
 /*
  * MMU Setup
  */
@@ -125,7 +145,7 @@
 				 BATL_GUARDEDSTORAGE)
 #define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
 
-#ifdef CONFIG_KM_DISABLE_APP2
+#if defined(CONFIG_TUGE1) || defined(CONFIG_KMSUPX5)
 #define CONFIG_SYS_IBAT6L	(0)
 #define CONFIG_SYS_IBAT6U	(0)
 #define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L