Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'

18 files changed, 394 insertions, 43 deletions

diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index ef00306..f019134 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -17,6 +17,7 @@
 #define __CONFIG_AM335X_EVM_H
 
 #define CONFIG_AM33XX
+#define CONFIG_OMAP
 
 #include <asm/arch/omap.h>
 
@@ -196,7 +197,6 @@
 					+ (8 * 1024 * 1024))
 
 #define CONFIG_SYS_LOAD_ADDR		0x81000000 /* Default load address */
-#define CONFIG_SYS_HZ			1000 /* 1ms clock */
 
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
@@ -260,12 +260,11 @@
  /* Platform/Board specific defs */
 #define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
+#define CONFIG_SYS_HZ			1000	/* 1ms clock */
 
 /* NS16550 Configuration */
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SERIAL_MULTI
 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
 #define CONFIG_SYS_NS16550_CLK		(48000000)
 #define CONFIG_SYS_NS16550_COM1		0x44e09000	/* Base EVM has UART0 */
@@ -295,6 +294,9 @@
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 110, 300, 600, 1200, 2400, \
 4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 }
 
+/* CPU */
+#define CONFIG_ARCH_CPU_INIT
+
 #define CONFIG_ENV_OVERWRITE		1
 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 
@@ -360,11 +362,7 @@
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	14
 
-#define CONFIG_SYS_NAND_ECCSTEPS	4
-#define	CONFIG_SYS_NAND_ECCTOTAL	(CONFIG_SYS_NAND_ECCBYTES * \
-						CONFIG_SYS_NAND_ECCSTEPS)
-
-#define	CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 726714d..c6e357a 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -135,12 +135,12 @@
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_EXT2		/* EXT2 Support			*/
 #define CONFIG_CMD_FAT		/* FAT support			*/
-#define CONFIG_CMD_JFFS2	/* JFFS2 Support		*/
 #define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands */
 #define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
+#define CONFIG_MTD_PARTITIONS
 #define MTDIDS_DEFAULT		"nand0=nand"
 #define MTDPARTS_DEFAULT	"mtdparts=nand:512k(x-loader),"\
-				"1920k(u-boot),128k(u-boot-env),"\
+				"1920k(u-boot),256k(u-boot-env),"\
 				"4m(kernel),-(fs)"
 
 #define CONFIG_CMD_I2C		/* I2C serial bus support	*/
@@ -182,14 +182,6 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
-#define CONFIG_JFFS2_NAND
-/* nand device jffs2 lives on */
-#define CONFIG_JFFS2_DEV		"nand0"
-/* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_OFFSET	0x680000
-#define CONFIG_JFFS2_PART_SIZE		0xf980000	/* size of jffs2 */
-							/* partition */
-
 /* Environment information */
 #define CONFIG_BOOTDELAY		10
 #define CONFIG_ZERO_BOOTDELAY_CHECK
@@ -204,9 +196,9 @@
 	"defaultdisplay=dvi\0" \
 	"mmcdev=0\0" \
 	"mmcroot=/dev/mmcblk0p2 rw\0" \
-	"mmcrootfstype=ext3 rootwait\0" \
+	"mmcrootfstype=ext4 rootwait\0" \
 	"nandroot=/dev/mtdblock4 rw\0" \
-	"nandrootfstype=jffs2\0" \
+	"nandrootfstype=ubifs\0" \
 	"mmcargs=setenv bootargs console=${console} " \
 		"mpurate=${mpurate} " \
 		"vram=${vram} " \
@@ -232,7 +224,7 @@
 		"bootm ${loadaddr}\0" \
 	"nandboot=echo Booting from nand ...; " \
 		"run nandargs; " \
-		"nand read ${loadaddr} 280000 400000; " \
+		"nand read ${loadaddr} 2a0000 400000; " \
 		"bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h
index f7ac256..198892b 100644
--- a/include/configs/da830evm.h
+++ b/include/configs/da830evm.h
@@ -109,8 +109,8 @@
 #define CONFIG_SYS_NAND_CS		3
 #define CONFIG_SYS_NAND_BASE		DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
 #define CONFIG_SYS_NAND_PAGE_2K
-#define CONFIG_SYS_CLE_MASK		0x10
-#define CONFIG_SYS_ALE_MASK		0x8
+#define CONFIG_SYS_NAND_MASK_CLE		0x10
+#define CONFIG_SYS_NAND_MASK_ALE		0x8
 #define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */
 #endif
 
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 583568d..c420967 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -199,8 +199,8 @@
 #define	CONFIG_SYS_NAND_PAGE_2K
 #define CONFIG_SYS_NAND_CS		3
 #define CONFIG_SYS_NAND_BASE		DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
-#define CONFIG_SYS_CLE_MASK		0x10
-#define CONFIG_SYS_ALE_MASK		0x8
+#define CONFIG_SYS_NAND_MASK_CLE		0x10
+#define CONFIG_SYS_NAND_MASK_ALE		0x8
 #undef CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */
 #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h
index 2d63b67..97bc972 100644
--- a/include/configs/enbw_cmc.h
+++ b/include/configs/enbw_cmc.h
@@ -118,8 +118,8 @@
 #define CONFIG_SYS_NAND_PAGE_2K
 #define CONFIG_SYS_NAND_CS		3
 #define CONFIG_SYS_NAND_BASE		DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
-#define CONFIG_SYS_CLE_MASK		0x10
-#define CONFIG_SYS_ALE_MASK		0x8
+#define CONFIG_SYS_NAND_MASK_CLE		0x10
+#define CONFIG_SYS_NAND_MASK_ALE		0x8
 #undef CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */
 
diff --git a/include/configs/igep0033.h b/include/configs/igep0033.h
new file mode 100644
index 0000000..1912d7d
--- /dev/null
+++ b/include/configs/igep0033.h
@@ -0,0 +1,288 @@
+/*
+ * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __CONFIG_IGEP0033_H
+#define __CONFIG_IGEP0033_H
+
+#define CONFIG_AM33XX
+#define CONFIG_OMAP
+
+#include <asm/arch/omap.h>
+
+/* Mach type */
+#define MACH_TYPE_IGEP0033		4521	/* Until the next sync */
+#define CONFIG_MACH_TYPE		MACH_TYPE_IGEP0033
+
+/* Clock defines */
+#define V_OSCK				24000000  /* Clock output from T2 */
+#define V_SCLK				(V_OSCK)
+
+/* DMA defines */
+#define CONFIG_DMA_COHERENT
+#define CONFIG_DMA_COHERENT_SIZE	(1 << 20)
+
+#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
+#define CONFIG_SYS_MALLOC_LEN		(1024 << 10)
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
+#define CONFIG_SYS_PROMPT		"U-Boot# "
+#define CONFIG_SYS_NO_FLASH
+
+/* Display cpuinfo */
+#define CONFIG_DISPLAY_CPUINFO
+
+/* Commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+
+/*
+ * Because the issues explained in doc/README.memory-test, the "mtest command
+ * is considered deprecated. It should not be enabled in most normal ports of
+ * U-Boot.
+ */
+#undef CONFIG_CMD_MEMTEST
+
+#define CONFIG_BOOTDELAY		1	/* negative for no autoboot */
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"loadaddr=0x80200000\0" \
+	"rdaddr=0x81000000\0" \
+	"bootfile=/boot/uImage\0" \
+	"console=ttyO0,115200n8\0" \
+	"optargs=\0" \
+	"mmcdev=0\0" \
+	"mmcroot=/dev/mmcblk0p2 rw\0" \
+	"mmcrootfstype=ext4 rootwait\0" \
+	"ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \
+	"ramrootfstype=ext2\0" \
+	"mmcargs=setenv bootargs console=${console} " \
+		"${optargs} " \
+		"root=${mmcroot} " \
+		"rootfstype=${mmcrootfstype}\0" \
+	"bootenv=uEnv.txt\0" \
+	"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+	"importbootenv=echo Importing environment from mmc ...; " \
+		"env import -t $loadaddr $filesize\0" \
+	"ramargs=setenv bootargs console=${console} " \
+		"${optargs} " \
+		"root=${ramroot} " \
+		"rootfstype=${ramrootfstype}\0" \
+	"loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
+	"loaduimagefat=load mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \
+	"loaduimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootfile}\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"bootm ${loadaddr}\0" \
+	"ramboot=echo Booting from ramdisk ...; " \
+		"run ramargs; " \
+		"bootm ${loadaddr}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
+		"echo SD/MMC found on device ${mmcdev};" \
+		"if run loadbootenv; then " \
+			"echo Loaded environment from ${bootenv};" \
+			"run importbootenv;" \
+		"fi;" \
+		"if test -n $uenvcmd; then " \
+			"echo Running uenvcmd ...;" \
+			"run uenvcmd;" \
+		"fi;" \
+		"if run loaduimage; then " \
+			"run mmcboot;" \
+		"fi;" \
+	"fi;" \
+
+/* Max number of command args */
+#define CONFIG_SYS_MAXARGS		16
+
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		512
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE \
+					+ sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_LOAD_ADDR		0x81000000 /* Default load address */
+#define CONFIG_SYS_HZ			1000 /* 1ms clock */
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS		1		/*  1 bank of DRAM */
+#define PHYS_DRAM_1			0x80000000	/* DRAM Bank #1 */
+#define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_DRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
+						GENERATED_GBL_DATA_SIZE)
+/* Platform/Board specific defs */
+#define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
+#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ			1000
+
+/* NS16550 Configuration */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		(48000000)
+#define CONFIG_SYS_NS16550_COM1		0x44e09000	/* UART0 */
+
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_BAUDRATE			115200
+
+/* CPU */
+#define CONFIG_ARCH_CPU_INIT
+
+#define CONFIG_ENV_OVERWRITE		1
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+
+/* MMC support */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_DOS_PARTITION
+
+/* GPIO support */
+#define CONFIG_OMAP_GPIO
+
+/* Ethernet support */
+#define CONFIG_DRIVER_TI_CPSW
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_NET_RETRY_COUNT         10
+#define CONFIG_NET_MULTI
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ADDR			0
+#define CONFIG_PHY_SMSC
+
+/* NAND support */
+#define CONFIG_NAND
+#define CONFIG_NAND_OMAP_GPMC
+#define GPMC_NAND_ECC_LP_x16_LAYOUT	1
+#define CONFIG_SYS_NAND_BASE		(0x08000000)	/* phys address CS0 */
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_ONFI_DETECTION	1
+#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET		0x260000 /* environment starts here */
+
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+
+#define MTDIDS_DEFAULT			"nand0=nand"
+#define MTDPARTS_DEFAULT		"mtdparts=nand:512k(SPL),"\
+					"1m(U-Boot),128k(U-Boot Env),"\
+					"5m(Kernel),-(File System)"
+
+/* Unsupported features */
+#undef CONFIG_USE_IRQ
+
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE		0x402F0400
+#define CONFIG_SPL_MAX_SIZE		(101 * 1024)
+#define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
+
+#define CONFIG_SPL_BSS_START_ADDR	0x80000000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_YMODEM_SUPPORT
+#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/am33xx/u-boot-spl.lds"
+
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SPL_NAND_AM33XX_BCH
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
+					 CONFIG_SYS_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_PAGE_SIZE	2048
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
+					 10, 11, 12, 13, 14, 15, 16, 17, \
+					 18, 19, 20, 21, 22, 23, 24, 25, \
+					 26, 27, 28, 29, 30, 31, 32, 33, \
+					 34, 35, 36, 37, 38, 39, 40, 41, \
+					 42, 43, 44, 45, 46, 47, 48, 49, \
+					 50, 51, 52, 53, 54, 55, 56, 57, }
+
+#define CONFIG_SYS_NAND_ECCSIZE		512
+#define CONFIG_SYS_NAND_ECCBYTES	14
+
+#define CONFIG_SYS_NAND_ECCSTEPS	4
+#define	CONFIG_SYS_NAND_ECCTOTAL	(CONFIG_SYS_NAND_ECCBYTES * \
+						CONFIG_SYS_NAND_ECCSTEPS)
+
+#define	CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
+
+/*
+ * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
+ * 64 bytes before this address should be set aside for u-boot.img's
+ * header. That is 0x800FFFC0--0x80100000 should not be used for any
+ * other needs.
+ */
+#define CONFIG_SYS_TEXT_BASE		0x80800000
+#define CONFIG_SYS_SPL_MALLOC_START	0x80208000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
+
+/*
+ * Since SPL did pll and ddr initialization for us,
+ * we don't need to do it twice.
+ */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
+
+#endif	/* ! __CONFIG_IGEP0033_H */
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index 1fd3097..d6448b0 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -87,6 +87,10 @@
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
 					115200}
+
+/* CPU */
+#define CONFIG_ARCH_CPU_INIT
+
 /* I2C  */
 #define CONFIG_HARD_I2C			1
 #define CONFIG_SYS_I2C_SPEED		100000
@@ -176,7 +180,9 @@
 		"if test $board_name = sdp4430; then " \
 			"setenv fdtfile omap4-sdp.dtb; fi; " \
 		"if test $board_name = panda; then " \
-			"setenv fdtfile omap4-panda-es.dtb; fi\0" \
+			"setenv fdtfile omap4-panda.dtb; fi;" \
+		"if test $board_name = panda-es; then " \
+			"setenv fdtfile omap4-panda-es.dtb; fi; \0" \
 	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
 
 #define CONFIG_BOOTCOMMAND \
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index eacb5f5..abf586b 100644
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -66,4 +66,6 @@
 
 #define CONFIG_SYS_PROMPT		"Panda # "
 
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
 #endif /* __CONFIG_PANDA_H */
diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h
index c21c387..deb5e9f 100644
--- a/include/configs/omap5_common.h
+++ b/include/configs/omap5_common.h
@@ -86,6 +86,9 @@
 
 #define CONFIG_BAUDRATE			115200
 
+/* CPU */
+#define CONFIG_ARCH_CPU_INIT
+
 /* I2C  */
 #define CONFIG_HARD_I2C
 #define CONFIG_SYS_I2C_SPEED		100000
@@ -150,10 +153,12 @@
 	"usbtty=cdc_acm\0" \
 	"vram=16M\0" \
 	"partitions=" PARTS_DEFAULT "\0" \
+	"optargs=\0" \
 	"mmcdev=0\0" \
 	"mmcroot=/dev/mmcblk0p2 rw\0" \
 	"mmcrootfstype=ext4 rootwait\0" \
 	"mmcargs=setenv bootargs console=${console} " \
+		"${optargs} " \
 		"vram=${vram} " \
 		"root=${mmcroot} " \
 		"rootfstype=${mmcrootfstype}\0" \
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index 550cabd..9e0339b 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -37,7 +37,7 @@
 
 /* TWL6035 */
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_TWL6035_POWER
+#define CONFIG_PALMAS_POWER
 #endif
 
 /* MMC ENV related defines */
@@ -56,4 +56,5 @@
 
 #define CONFIG_SYS_PROMPT		"OMAP5430 EVM # "
 
+#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC	16296
 #endif /* __CONFIG_OMAP5_EVM_H */
diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h
index d0ea74e..478f805 100644
--- a/include/configs/pcm051.h
+++ b/include/configs/pcm051.h
@@ -20,6 +20,7 @@
 #define __CONFIG_PCM051_H
 
 #define CONFIG_AM33XX
+#define CONFIG_OMAP
 
 #include <asm/arch/omap.h>
 
@@ -129,7 +130,6 @@
 					+ (8 * 1024 * 1024))
 
 #define CONFIG_SYS_LOAD_ADDR		0x80007fc0 /* Default load address */
-#define CONFIG_SYS_HZ			1000 /* 1ms clock */
 
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
@@ -158,13 +158,12 @@
  /* Platform/Board specific defs */
 #define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
+#define CONFIG_SYS_HZ			1000	/* 1ms clock */
 
 #define CONFIG_CONS_INDEX		1
 /* NS16550 Configuration */
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SERIAL_MULTI
 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
 #define CONFIG_SYS_NS16550_CLK		(48000000)
 #define CONFIG_SYS_NS16550_COM1		0x44e09000	/* Base EVM has UART0 */
@@ -194,6 +193,9 @@
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 110, 300, 600, 1200, 2400, \
 4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 }
 
+/* CPU */
+#define CONFIG_ARCH_CPU_INIT
+
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 
diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h
index 16547e3..eac5ad0 100644
--- a/include/configs/ti814x_evm.h
+++ b/include/configs/ti814x_evm.h
@@ -19,6 +19,7 @@
 #define CONFIG_TI81XX
 #define CONFIG_TI814X
 #define CONFIG_SYS_NO_FLASH
+#define CONFIG_OMAP
 
 #include <asm/arch/omap.h>
 
@@ -162,6 +163,9 @@
 
 #define CONFIG_BAUDRATE			115200
 
+/* CPU */
+#define CONFIG_ARCH_CPU_INIT
+
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX		1
 #define CONFIG_SYS_CONSOLE_INFO_QUIET
@@ -218,4 +222,25 @@
 /* Unsupported features */
 #undef CONFIG_USE_IRQ
 
+/* Ethernet */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_MII
+#define CONFIG_DRIVER_TI_CPSW
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_NET_RETRY_COUNT         10
+#define CONFIG_NET_MULTI
+#define CONFIG_PHY_GIGE
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ADDR			1
+#define CONFIG_PHY_ET1011C
+#define CONFIG_PHY_ET1011C_TX_CLK_FIX
+
 #endif	/* ! __CONFIG_TI814X_EVM_H */
diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h
index d6371fc..cabc06e 100644
--- a/include/configs/tnetv107x_evm.h
+++ b/include/configs/tnetv107x_evm.h
@@ -82,8 +82,8 @@
 #define CONFIG_SYS_NAND_CS		2
 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 #define CONFIG_SYS_NAND_BASE		TNETV107X_ASYNC_EMIF_DATA_CE0_BASE
-#define CONFIG_SYS_CLE_MASK		0x10
-#define CONFIG_SYS_ALE_MASK		0x8
+#define CONFIG_SYS_NAND_MASK_CLE		0x10
+#define CONFIG_SYS_NAND_MASK_ALE		0x8
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_CMD_MTDPARTS
diff --git a/include/twl6035.h b/include/palmas.h
index ce74348..3b18589 100644
--- a/include/twl6035.h
+++ b/include/palmas.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2012
+ * (C) Copyright 2012-2013
  * Texas Instruments, <www.ti.com>
  *
  * See file CREDITS for list of people who contributed to this
@@ -20,12 +20,14 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */
+#ifndef PALMAS_H
+#define PALMAS_H
 
 #include <common.h>
 #include <i2c.h>
 
 /* I2C chip addresses */
-#define TWL6035_CHIP_ADDR	0x48
+#define PALMAS_CHIP_ADDR	0x48
 
 /* 0x1XY translates to page 1, register address 0xXY */
 #define LDO9_CTRL		0x60
@@ -36,7 +38,21 @@
 #define LDO_MODE_SLEEP		(1 << 2)
 #define LDO_MODE_ACTIVE		(1 << 0)
 
-int twl6035_i2c_write_u8(u8 chip_no, u8 val, u8 reg);
-int twl6035_i2c_read_u8(u8 chip_no, u8 *val, u8 reg);
-void twl6035_init_settings(void);
-int twl6035_mmc1_poweron_ldo(void);
+/*
+ * Functions to read and write from TPS659038/TWL6035/TWL6037
+ * or other Palmas family of TI PMICs
+ */
+static inline int palmas_i2c_write_u8(u8 chip_no, u8 reg, u8 val)
+{
+	return i2c_write(chip_no, reg, 1, &val, 1);
+}
+
+static inline int palmas_i2c_read_u8(u8 chip_no, u8 reg, u8 *val)
+{
+	return i2c_read(chip_no, reg, 1, val, 1);
+}
+
+void palmas_init_settings(void);
+int palmas_mmc1_poweron_ldo(void);
+
+#endif /* PALMAS_H */
diff --git a/include/phy.h b/include/phy.h
index 58ca273..7b4ce74 100644
--- a/include/phy.h
+++ b/include/phy.h
@@ -223,6 +223,7 @@ int gen10g_discover_mmds(struct phy_device *phydev);
 int phy_atheros_init(void);
 int phy_broadcom_init(void);
 int phy_davicom_init(void);
+int phy_et1011c_init(void);
 int phy_lxt_init(void);
 int phy_marvell_init(void);
 int phy_micrel_init(void);
diff --git a/include/spl.h b/include/spl.h
index b40be80..4bc1dd1 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -44,7 +44,6 @@ struct spl_image_info {
 #define SPL_COPY_PAYLOAD_ONLY	1
 
 extern struct spl_image_info spl_image;
-extern u32 *boot_params_ptr;
 
 /* SPL common functions */
 void preloader_console_init(void);
diff --git a/include/twl4030.h b/include/twl4030.h
index 5aa1841..569ad27 100644
--- a/include/twl4030.h
+++ b/include/twl4030.h
@@ -638,12 +638,12 @@
  *   examples are TWL4030_PM_RECEIVER_VMMC1_DEV_GRP and
  *   TWL4030_LED_LEDEN.
  */
-static inline int twl4030_i2c_write_u8(u8 chip_no, u8 val, u8 reg)
+static inline int twl4030_i2c_write_u8(u8 chip_no, u8 reg, u8 val)
 {
 	return i2c_write(chip_no, reg, 1, &val, 1);
 }
 
-static inline int twl4030_i2c_read_u8(u8 chip_no, u8 *val, u8 reg)
+static inline int twl4030_i2c_read_u8(u8 chip_no, u8 reg, u8 *val)
 {
 	return i2c_read(chip_no, reg, 1, val, 1);
 }
diff --git a/include/twl6030.h b/include/twl6030.h
index a9fcadb..029b21f 100644
--- a/include/twl6030.h
+++ b/include/twl6030.h
@@ -21,6 +21,9 @@
  * MA 02111-1307 USA
  */
 
+#ifndef TWL6030_H
+#define TWL6030_H
+
 #include <common.h>
 #include <i2c.h>
 
@@ -126,6 +129,17 @@
 #define GPCH0_LSB	0x57
 #define GPCH0_MSB	0x58
 
+/* Functions to read and write from TWL6030 */
+static inline int twl6030_i2c_write_u8(u8 chip_no, u8 reg, u8 val)
+{
+	return i2c_write(chip_no, reg, 1, &val, 1);
+}
+
+static inline int twl6030_i2c_read_u8(u8 chip_no, u8 reg, u8 *val)
+{
+	return i2c_read(chip_no, reg, 1, val, 1);
+}
+
 void twl6030_init_battery_charging(void);
 void twl6030_usb_device_settings(void);
 void twl6030_start_usb_charging(void);
@@ -133,3 +147,5 @@ void twl6030_stop_usb_charging(void);
 int twl6030_get_battery_voltage(void);
 int twl6030_get_battery_current(void);
 void twl6030_power_mmc_init(void);
+
+#endif /* TWL6030_H */