mpc8260: remove VoVPN-GW board support

This board is still a non-generic board.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

1 files changed, 0 insertions, 399 deletions

diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h
deleted file mode 100644
index 1ceef11..0000000
--- a/include/configs/VoVPN-GW.h
+++ /dev/null
@@ -1,399 +0,0 @@
-/*
- * (C) Copyright 2004
- * Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de)
- *
- * Support for the Elmeg VoVPN Gateway Module
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* define cpu used */
-#define	CONFIG_MPC8272			1
-
-/* define busmode: 8260 */
-#undef	CONFIG_BUSMODE_60x
-
-#define	CONFIG_SYS_TEXT_BASE		0xfff00000
-
-/* system clock rate (CLKIN) - equal to the 60x and local bus speed */
-#ifdef	CONFIG_CLKIN_66MHz
-#define	CONFIG_8260_CLKIN		66666666	/* in Hz */
-#else
-#define	CONFIG_8260_CLKIN		100000000	/* in Hz */
-#endif
-
-/* call board_early_init_f */
-#define	CONFIG_BOARD_EARLY_INIT_F	1
-
-/* have misc_init_r() function */
-#define CONFIG_MISC_INIT_R		1
-
-/* have reset_phy_r() function */
-#define CONFIG_RESET_PHY_R		1
-
-/* have special reset function */
-#define	CONFIG_HAVE_OWN_RESET		1
-
-/* allow serial and ethaddr to be overwritten */
-#define	CONFIG_ENV_OVERWRITE
-
-/* watchdog disabled */
-#undef	CONFIG_WATCHDOG
-
-/* include support for bzip2 compressed images */
-#undef	CONFIG_BZIP2
-
-/* status led */
-#undef	CONFIG_STATUS_LED		/* XXX jse */
-
-/* vendor parameter protection */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * select serial console configuration
- *
- * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- */
-#define	CONFIG_CONS_ON_SMC
-#undef	CONFIG_CONS_ON_SCC
-#undef	CONFIG_CONS_NONE
-#define	CONFIG_CONS_INDEX		1
-
-/* serial port default baudrate */
-#define CONFIG_BAUDRATE			115200
-
-/* echo on for serial download	*/
-#define CONFIG_LOADS_ECHO		1
-
-/* don't allow baudrate change	*/
-#undef	CONFIG_SYS_LOADS_BAUD_CHANGE
-
-/*
- * select ethernet configuration
- *
- * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
- * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
- * for FCC)
- *
- * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
- */
-#undef	CONFIG_ETHER_ON_SCC
-#define	CONFIG_ETHER_ON_FCC
-#undef	CONFIG_ETHER_NONE
-
-#ifdef	CONFIG_ETHER_ON_FCC
-
-/* which SCC/FCC channel for ethernet */
-#define	CONFIG_ETHER_INDEX		1
-
-/* Marvell Switch SMI base addr */
-#define CONFIG_SYS_PHY_ADDR			0x10
-
-/* FCC1 RMII REFCLK is CLK10 */
-#define CONFIG_SYS_CMXFCR_VALUE		CMXFCR_TF1CS_CLK10
-#define CONFIG_SYS_CMXFCR_MASK			(CMXFCR_FC1|CMXFCR_TF1CS_MSK)
-
-/* BDs and buffers on 60x bus */
-#define CONFIG_SYS_CPMFCR_RAMTYPE		0
-
-/* Local Protect, Full duplex, Flowcontrol, RMII */
-#define CONFIG_SYS_FCC_PSMR			(FCC_PSMR_LPB|FCC_PSMR_FDE|\
-					 FCC_PSMR_FCE|FCC_PSMR_RMII)
-
-/* bit-bang MII PHY management	*/
-#define CONFIG_BITBANGMII
-
-#define MDIO_PORT			1		/* Port B */
-
-#define MDIO_DECLARE		volatile ioport_t *iop = ioport_addr ( \
-					(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-#define MDC_DECLARE		MDIO_DECLARE
-
-#define CONFIG_SYS_MDIO_PIN			0x00002000	/* PB18 */
-#define CONFIG_SYS_MDC_PIN			0x00001000	/* PB19 */
-#define MDIO_ACTIVE			(iop->pdir |=  CONFIG_SYS_MDIO_PIN)
-#define MDIO_TRISTATE			(iop->pdir &= ~CONFIG_SYS_MDIO_PIN)
-#define MDIO_READ			((iop->pdat &  CONFIG_SYS_MDIO_PIN) != 0)
-#define MDIO(bit)			if(bit) iop->pdat |=  CONFIG_SYS_MDIO_PIN; \
-					else	iop->pdat &= ~CONFIG_SYS_MDIO_PIN
-#define MDC(bit)			if(bit) iop->pdat |=  CONFIG_SYS_MDC_PIN; \
-					else	iop->pdat &= ~CONFIG_SYS_MDC_PIN
-#define MIIDELAY			udelay(1)
-
-#endif
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_CONSOLE
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_IMLS
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_SOURCE
-
-
-/*
- * boot options & environment
- */
-#define CONFIG_BOOTDELAY		3
-#define CONFIG_BOOTCOMMAND		"run flash_self"
-#undef  CONFIG_BOOTARGS
-#define	CONFIG_EXTRA_ENV_SETTINGS	\
-"clean_nv=erase fff20000 ffffffff\0" \
-"update_boss=tftp 100000 PPC/logic157.bin; protect off fff00000 ffffffff; erase fff00000 ffffffff; cp.b 100000 fff00000 ${filesize}; tftp 100000 PPC/bootmon157.bin; cp.b 100000 fff20000 ${filesize}\0" \
-"update_lx=tftp 100000 ${kernel}; erase ${kernel_addr} ffefffff; cp.b 100000 ${kernel_addr} ${filesize}\0" \
-"update_fs=tftp 100000 ${fs}.${fstype}; erase ff840000 ffdfffff; cp.b 100000 ff840000 ${filesize}\0" \
-"update_ub=tftp 100000 ${uboot}; protect off fff00000 fff1ffff; erase fff00000 fff1ffff; cp.b 100000 fff00000 ${filesize}; protect off ff820000 ff83ffff; erase ff820000 ff83ffff\0" \
-"flashargs=setenv bootargs root=${rootdev} rw rootfstype=${fstype}\0" \
-"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0" \
-"addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off\0" \
-"addmisc=setenv bootargs ${bootargs} console=${console},${baudrate} ethaddr=${ethaddr} panic=1\0" \
-"net_nfs=tftpboot 400000 ${kernel}; run nfsargs addip addmisc; bootm\0" \
-"net_self=tftpboot 400000 ${kernel}; run flashargs addmisc; bootm\0" \
-"flash_self=run flashargs addmisc; bootm ${kernel_addr}\0" \
-"flash_nfs=run nfsargs addip addmisc; bootm ${kernel_addr}\0" \
-"fstype=cramfs\0" \
-"rootpath=/root_fs\0" \
-"uboot=PPC/u-boot.bin\0" \
-"kernel=PPC/uImage\0" \
-"kernel_addr=ffe00000\0" \
-"fs=PPC/root_fs\0" \
-"console=ttyS0\0" \
-"netdev=eth0\0" \
-"rootdev=31:3\0" \
-"ethaddr=00:09:4f:01:02:03\0" \
-"ipaddr=10.0.0.201\0" \
-"netmask=255.255.255.0\0" \
-"serverip=10.0.0.136\0" \
-"gatewayip=10.0.0.10\0" \
-"hostname=bastard\0" \
-""
-
-
-/*
- * miscellaneous configurable options
- */
-
-/* undef to save memory */
-#define	CONFIG_SYS_LONGHELP
-
-/* monitor command prompt */
-
-/* console i/o buffer size */
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE			1024
-#else
-#define	CONFIG_SYS_CBSIZE			256
-#endif
-
-/* print buffer size */
-#define	CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* max number of command args */
-#define	CONFIG_SYS_MAXARGS			16
-
-/* boot argument buffer size */
-#define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE
-
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START		0x00100000
-/* 1 ... 15 MB in DRAM */
-#define CONFIG_SYS_MEMTEST_END			0x00f00000
-/* full featured memtest */
-#define CONFIG_SYS_ALT_MEMTEST
-
-/* default load address */
-#define	CONFIG_SYS_LOAD_ADDR			0x00100000
-
-/* decrementer freq: 1 ms ticks	*/
-
-/* configure flash */
-#define CONFIG_SYS_FLASH_BASE			0xff800000
-#define CONFIG_SYS_MAX_FLASH_BANKS		1
-#define CONFIG_SYS_MAX_FLASH_SECT		64
-#define CONFIG_SYS_FLASH_SIZE			8
-#undef	CONFIG_SYS_FLASH_16BIT
-#define CONFIG_SYS_FLASH_ERASE_TOUT		240000
-#define CONFIG_SYS_FLASH_WRITE_TOUT		500
-#define CONFIG_SYS_FLASH_LOCK_TOUT		500
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT		10000
-#define CONFIG_SYS_FLASH_PROTECTION
-
-/* monitor in flash */
-#define CONFIG_SYS_MONITOR_OFFSET		0x00700000
-
-/* environment in flash */
-#define CONFIG_ENV_IS_IN_FLASH		1
-#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x00020000)
-#define CONFIG_ENV_SIZE			0x00020000
-#define CONFIG_ENV_SECT_SIZE		0x00020000
-
-/*
- * Initial memory map for linux
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ			(8 << 20)
-
-/* hard reset configuration words */
-#ifdef	CONFIG_CLKIN_66MHz
-#define CONFIG_SYS_HRCW_MASTER			0x04643050
-#else
-#error NO HRCW FOR 100MHZ SPECIFIED !!!
-#endif
-#define CONFIG_SYS_HRCW_SLAVE1			0x00000000
-#define CONFIG_SYS_HRCW_SLAVE2			0x00000000
-#define CONFIG_SYS_HRCW_SLAVE3			0x00000000
-#define CONFIG_SYS_HRCW_SLAVE4			0x00000000
-#define CONFIG_SYS_HRCW_SLAVE5			0x00000000
-#define CONFIG_SYS_HRCW_SLAVE6			0x00000000
-#define CONFIG_SYS_HRCW_SLAVE7			0x00000000
-
-/* internal memory mapped register */
-#define CONFIG_SYS_IMMR			0xF0000000
-
-/* definitions for initial stack pointer and data area (in DPRAM) */
-#define CONFIG_SYS_INIT_RAM_ADDR		CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE		0x2000
-#define CONFIG_SYS_GBL_DATA_OFFSET		(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET		CONFIG_SYS_GBL_DATA_OFFSET
-
-/*
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE			0x00000000
-#define CONFIG_SYS_SDRAM_SIZE			(32*1024*1024)
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_FLASH		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_OFFSET)
-#define CONFIG_SYS_MONITOR_LEN			0x00020000
-#define CONFIG_SYS_MALLOC_LEN			0x00020000
-
-/* cache configuration */
-#define CONFIG_SYS_CACHELINE_SIZE		32      /* for MPC8260 */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT		5	/* log base 2 of above */
-#endif
-
-/*
- * HIDx - Hardware Implementation-dependent Registers
- *-----------------------------------------------------------------------
- * HID0 also contains cache control - initially enable both caches and
- * invalidate contents, then the final state leaves only the instruction
- * cache enabled. Note that Power-On and Hard reset invalidate the caches,
- * but Soft reset does not.
- *
- * HID1 has only read-only information - nothing to set.
- */
-#define CONFIG_SYS_HID0_INIT			(HID0_ICE|HID0_DCE|\
-					 HID0_ICFI|HID0_DCI|HID0_IFEM|HID0_ABE)
-#define CONFIG_SYS_HID0_FINAL			(HID0_IFEM|HID0_ABE)
-#define CONFIG_SYS_HID2			0
-
-/* RMR - reset mode register - turn on checkstop reset enable */
-#define CONFIG_SYS_RMR				RMR_CSRE
-
-/* BCR - bus configuration */
-#define CONFIG_SYS_BCR				0x00000000
-
-/* SIUMCR - siu module configuration */
-#define CONFIG_SYS_SIUMCR			0x4905c000
-
-/* SYPCR - system protection control */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR			0xffffff87
-#else
-#define CONFIG_SYS_SYPCR			0xffffff83
-#endif
-
-/* TMCNTSC - time counter status and control */
-/* clear interrupts XXX jse */
-/*#define CONFIG_SYS_TMCNTSC			(TMCNTSC_SEC|TMCNTSC_ALR) */
-#define CONFIG_SYS_TMCNTSC			(TMCNTSC_SEC|TMCNTSC_ALR|\
-					 TMCNTSC_TCF|TMCNTSC_TCE)
-
-/* PISCR - periodic interrupt status and control */
-/* clear interrupts XXX jse */
-/*#define CONFIG_SYS_PISCR			(PISCR_PS) */
-#define CONFIG_SYS_PISCR			(PISCR_PS|PISCR_PTF|PISCR_PTE)
-
-/* SCCR - system clock control */
-#define CONFIG_SYS_SCCR			0x000001a9
-
-/* RCCR - risc controller configuration */
-#define CONFIG_SYS_RCCR			0
-
-/*
- * MEMORY MAP
- * ----------
- * CS0 - FLASH    8MB/8Bit	base=0xff800000 (boot: 0xfe000000, 8x mirrored)
- * CS1 - SDRAM   32MB/64Bit	base=0x00000000
- * CS2 - DSP/SL1  1MB/16Bit	base=0xf0100000
- * CS3 - DSP/SL2  1MB/16Bit	base=0xf0200000
- * CS4 - DSP/SL3  1MB/16Bit	base=0xf0300000
- * CS5 - DSP/SL4  1MB/16Bit	base=0xf0400000
- * CS7 - DPRAM    1KB/8Bit	base=0xf0500000, size=32KB (32x mirrored)
- *  x  - IMMR     384KB		base=0xf0000000
- */
-/* XXX jse 100MHz TODO */
-#define CONFIG_SYS_BR0_PRELIM			0xff800801
-#define CONFIG_SYS_OR0_PRELIM			0xff801e44
-#define CONFIG_SYS_BR1_PRELIM			0x00000041
-#define CONFIG_SYS_OR1_PRELIM			0xfe002ec0
-#if 1
-#define CONFIG_SYS_BR2_PRELIM			0xf0101001
-#define CONFIG_SYS_OR2_PRELIM			0xfff00ef4
-#define CONFIG_SYS_BR3_PRELIM			0xf0201001
-#define CONFIG_SYS_OR3_PRELIM			0xfff00ef4
-#define CONFIG_SYS_BR4_PRELIM			0xf0301001
-#define CONFIG_SYS_OR4_PRELIM			0xfff00ef4
-#define CONFIG_SYS_BR5_PRELIM			0xf0401001
-#define CONFIG_SYS_OR5_PRELIM			0xfff00ef4
-#else
-#define CONFIG_SYS_BR2_PRELIM			0xf0101081
-#define CONFIG_SYS_OR2_PRELIM			0xfff00104
-#define CONFIG_SYS_BR3_PRELIM			0xf0201081
-#define CONFIG_SYS_OR3_PRELIM			0xfff00104
-#define CONFIG_SYS_BR4_PRELIM			0xf0301081
-#define CONFIG_SYS_OR4_PRELIM			0xfff00104
-#define CONFIG_SYS_BR5_PRELIM			0xf0401081
-#define CONFIG_SYS_OR5_PRELIM			0xfff00104
-#endif
-#define CONFIG_SYS_BR7_PRELIM			0xf0500881
-#define CONFIG_SYS_OR7_PRELIM			0xffff8104
-#define CONFIG_SYS_MPTPR			0x2700
-#define CONFIG_SYS_PSDMR			0x822a2452	/* optimal */
-/*#define CONFIG_SYS_PSDMR			0x822a48a3 */	/* relaxed */
-#define CONFIG_SYS_PSRT			0x1a
-
-/* "bad" address */
-#define	CONFIG_SYS_RESET_ADDRESS		0x40000000
-
-#endif	/* __CONFIG_H */