diff options
author | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2014-03-25 10:25:14 +0100 |
---|---|---|
committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2014-03-25 10:53:15 +0100 |
commit | ab6423cae0323e8db2c8fdd0a99138d93fde2137 (patch) | |
tree | a97493753a119e577161a4fb0b40b8edfc3923bb /include | |
parent | 63f347ec4ca94e3b57c6c719e4acaec81b61dc7a (diff) | |
parent | 2c072c958bb544c72f0e848375803dbd6971f022 (diff) | |
download | u-boot-imx-ab6423cae0323e8db2c8fdd0a99138d93fde2137.zip u-boot-imx-ab6423cae0323e8db2c8fdd0a99138d93fde2137.tar.gz u-boot-imx-ab6423cae0323e8db2c8fdd0a99138d93fde2137.tar.bz2 |
Merge branch 'u-boot/master' into 'u-boot-arm/master'
Trivial merge conflict, needed to manually remove
local_info as per commit 41364f0f.
Conflicts:
board/samsung/common/board.c
Diffstat (limited to 'include')
28 files changed, 539 insertions, 105 deletions
diff --git a/include/common.h b/include/common.h index 090fcde..5c9bd08 100644 --- a/include/common.h +++ b/include/common.h @@ -314,6 +314,7 @@ static inline int print_cpuinfo(void) } #endif int update_flash_size(int flash_size); +int arch_early_init_r(void); /** * Show the DRAM size in a board-specific way @@ -360,6 +361,11 @@ int do_ext2load(cmd_tbl_t *, int, int, char * const []); int env_init (void); void env_relocate (void); int envmatch (uchar *, int); + +/* Avoid unfortunate conflict with libc's getenv() */ +#ifdef CONFIG_SANDBOX +#define getenv uboot_getenv +#endif char *getenv (const char *); int getenv_f (const char *name, char *buf, unsigned len); ulong getenv_ulong(const char *name, int base, ulong default_val); diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 64acc88..b248302 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -16,8 +16,8 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg -#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg +#define CONFIG_SYS_FSL_PBL_PBI board/freescale/b4860qds/b4_pbi.cfg +#define CONFIG_SYS_FSL_PBL_RCW board/freescale/b4860qds/b4_rcw.cfg #endif #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 47c6384..b3880f1 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -18,9 +18,8 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/corenet_ds/pbi.cfg -#define CONFIG_SYS_FSL_PBL_RCW \ - $(SRCTREE)/board/freescale/corenet_ds/rcw_p2041rdb.cfg +#define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg +#define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p2041rdb.cfg #endif #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index e776a46..993f9ae 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -32,8 +32,8 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t1040qds/t1040_pbi.cfg -#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t1040qds/t1040_rcw.cfg +#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t1040qds/t1040_pbi.cfg +#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t1040qds/t1040_rcw.cfg #endif /* High Level Configuration Options */ diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index c6a30db..399ddbb 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -48,11 +48,11 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t208xqds/t208x_pbi.cfg +#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xqds/t208x_pbi.cfg #if defined(CONFIG_PPC_T2080) -#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t208xqds/t2080_rcw.cfg +#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_rcw.cfg #elif defined(CONFIG_PPC_T2081) -#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t208xqds/t2081_rcw.cfg +#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_rcw.cfg #endif #endif diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 979843b..743eee3 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -41,8 +41,8 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t208xrdb/t2080_pbi.cfg -#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t208xrdb/t2080_rcw.cfg +#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xrdb/t2080_pbi.cfg +#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_rcw.cfg #endif #define CONFIG_SRIO_PCIE_BOOT_MASTER diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index 0d43c27..56e1293 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -21,8 +21,8 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg -#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg +#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t4qds/t4_pbi.cfg +#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t4qds/t4_rcw.cfg #endif #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 72432e4..1e4bfc4 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -15,19 +15,15 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/corenet_ds/pbi.cfg +#define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg #if defined(CONFIG_P3041DS) -#define CONFIG_SYS_FSL_PBL_RCW \ - $(SRCTREE)/board/freescale/corenet_ds/rcw_p3041ds.cfg +#define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p3041ds.cfg #elif defined(CONFIG_P4080DS) -#define CONFIG_SYS_FSL_PBL_RCW \ - $(SRCTREE)/board/freescale/corenet_ds/rcw_p4080ds.cfg +#define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p4080ds.cfg #elif defined(CONFIG_P5020DS) -#define CONFIG_SYS_FSL_PBL_RCW \ - $(SRCTREE)/board/freescale/corenet_ds/rcw_p5020ds.cfg +#define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5020ds.cfg #elif defined(CONFIG_P5040DS) -#define CONFIG_SYS_FSL_PBL_RCW \ - $(SRCTREE)/board/freescale/corenet_ds/rcw_p5040ds.cfg +#define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5040ds.cfg #endif #endif diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h index 615df64..b7ff472 100644 --- a/include/configs/exynos5250-dt.h +++ b/include/configs/exynos5250-dt.h @@ -51,6 +51,7 @@ #define CONFIG_CMD_SOUND #ifdef CONFIG_CMD_SOUND #define CONFIG_SOUND +#define CONFIG_I2S_SAMSUNG #define CONFIG_I2S #define CONFIG_SOUND_MAX98095 #define CONFIG_SOUND_WM8994 diff --git a/include/configs/harmony.h b/include/configs/harmony.h index c4ff4a2..3ec0e41 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -61,8 +61,9 @@ /* USB networking support */ #define CONFIG_USB_HOST_ETHER -#define CONFIG_USB_ETHER_SMSC95XX #define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_MCS7830 +#define CONFIG_USB_ETHER_SMSC95XX /* General networking support */ #define CONFIG_CMD_NET diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index 0d24f78..582978a 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -28,8 +28,8 @@ #define CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/keymile/kmp204x/pbi.cfg -#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/keymile/kmp204x/rcw_kmp204x.cfg +#define CONFIG_SYS_FSL_PBL_PBI board/keymile/kmp204x/pbi.cfg +#define CONFIG_SYS_FSL_PBL_RCW board/keymile/kmp204x/rcw_kmp204x.cfg /* High Level Configuration Options */ #define CONFIG_BOOKE diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h index 2cde177..9eb1ad3 100644 --- a/include/configs/km_kirkwood.h +++ b/include/configs/km_kirkwood.h @@ -40,8 +40,7 @@ #define CONFIG_IDENT_STRING "\nKeymile Kirkwood 128M16" #define CONFIG_HOSTNAME km_kirkwood_128m16 #undef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG \ - $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg +#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg #define CONFIG_KM_DISABLE_PCIE #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ @@ -59,8 +58,7 @@ #endif #undef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG \ - $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg +#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg #define CONFIG_KM_ENV_IS_IN_SPI_NOR #define CONFIG_KM_FPGA_CONFIG #define CONFIG_KM_PIGGY4_88E6352 @@ -73,8 +71,7 @@ #define CONFIG_HOSTNAME mgcoge3un #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ #undef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG \ - $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-memphis.cfg +#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-memphis.cfg #define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0" #define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3 #define CONFIG_KM_DISABLE_PCIE @@ -85,8 +82,7 @@ #define CONFIG_IDENT_STRING "\nKeymile COGE5UN" #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ #undef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG \ - $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg +#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg #define CONFIG_KM_ENV_IS_IN_SPI_NOR #define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3 #define CONFIG_HOSTNAME kmcoge5un @@ -106,8 +102,7 @@ #define CONFIG_IDENT_STRING "\nKeymile SUV31" #define CONFIG_HOSTNAME kmsuv31 #undef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG \ - $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg +#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg #define CONFIG_KM_ENV_IS_IN_SPI_NOR #define CONFIG_KM_FPGA_CONFIG diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index f6e79ba..2d2e23a 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -80,9 +80,9 @@ * from the Network Space v2 */ #if defined(CONFIG_INETSPACE_V2) -#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-is2.cfg +#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-is2.cfg #elif defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2) -#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-ns2l.cfg +#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-ns2l.cfg #endif /* diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index 92865df..2ae8a27 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -13,12 +13,12 @@ */ #if defined(CONFIG_LSCHLV2) #define CONFIG_IDENT_STRING " LS-CHLv2" -#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-lschl.cfg +#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg #define CONFIG_MACH_TYPE 3006 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */ #elif defined(CONFIG_LSXHL) #define CONFIG_IDENT_STRING " LS-XHL" -#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg +#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg #define CONFIG_MACH_TYPE 2663 /* CONFIG_SYS_TCLK is 200000000 by default */ #else diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h index bd67603..16546c2 100644 --- a/include/configs/m53evk.h +++ b/include/configs/m53evk.h @@ -185,6 +185,7 @@ #define CONFIG_USB_STORAGE #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_MCS7830 #define CONFIG_USB_ETHER_SMSC95XX #define CONFIG_MXC_USB_PORT 1 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 77f8567..1415584 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -65,6 +65,7 @@ #define CONFIG_USB_STORAGE #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_MCS7830 #define CONFIG_USB_ETHER_SMSC95XX #define CONFIG_MXC_USB_PORT 1 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index ac517ce..f2db8c5 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -115,6 +115,7 @@ #define CONFIG_USB_STORAGE #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_MCS7830 #define CONFIG_USB_ETHER_SMSC95XX #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index ac0ed43..0b57421 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -120,8 +120,9 @@ #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 #define CONFIG_USB_HOST_ETHER -#define CONFIG_USB_ETHER_SMSC95XX #define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_MCS7830 +#define CONFIG_USB_ETHER_SMSC95XX /* GPIO banks */ #define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */ diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 6f424e1..04171bd 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -57,7 +57,7 @@ #define CONFIG_CMD_GPIO #define CONFIG_SANDBOX_GPIO -#define CONFIG_SANDBOX_GPIO_COUNT 20 +#define CONFIG_SANDBOX_GPIO_COUNT 128 #define CONFIG_CMD_GPT #define CONFIG_PARTITION_UUIDS @@ -66,7 +66,7 @@ /* * Size of malloc() pool, although we don't actually use this yet. */ -#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */ +#define CONFIG_SYS_MALLOC_LEN (32 << 20) /* 32MB */ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_LONGHELP /* #undef to save memory */ @@ -80,6 +80,7 @@ #define CONFIG_CMDLINE_EDITING #define CONFIG_COMMAND_HISTORY #define CONFIG_AUTO_COMPLETE +#define CONFIG_BOOTDELAY 3 #define CONFIG_ENV_SIZE 8192 #define CONFIG_ENV_IS_NOWHERE @@ -90,6 +91,8 @@ #define CONFIG_CMD_SF_TEST #define CONFIG_CMD_SPI #define CONFIG_SPI_FLASH +#define CONFIG_OF_SPI +#define CONFIG_OF_SPI_FLASH #define CONFIG_SPI_FLASH_SANDBOX #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_SPI_FLASH_WINBOND @@ -98,7 +101,9 @@ #define CONFIG_SYS_LOAD_ADDR 0x00000000 #define CONFIG_SYS_MEMTEST_START 0x00100000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x1000) -#define CONFIG_SYS_FDT_LOAD_ADDR 0x1000000 +#define CONFIG_SYS_FDT_LOAD_ADDR 0x100 + +#define CONFIG_PHYSMEM /* Size of our emulated memory */ #define CONFIG_SYS_SDRAM_BASE 0 @@ -126,13 +131,36 @@ #define CONFIG_SHA1 #define CONFIG_SHA256 +#define CONFIG_TPM_TIS_SANDBOX + #define CONFIG_CMD_SANDBOX #define CONFIG_BOOTARGS "" -#define CONFIG_EXTRA_ENV_SETTINGS "stdin=serial\0" \ - "stdout=serial\0" \ - "stderr=serial\0" +#define CONFIG_CROS_EC +#define CONFIG_CMD_CROS_EC +#define CONFIG_CROS_EC_SANDBOX +#define CONFIG_KEYBOARD +#define CONFIG_CROS_EC_KEYB +#define CONFIG_ARCH_EARLY_INIT_R +#define CONFIG_BOARD_LATE_INIT + +#define CONFIG_SOUND +#define CONFIG_SOUND_SANDBOX +#define CONFIG_CMD_SOUND + +#define CONFIG_SANDBOX_SDL +#define CONFIG_LCD +#define CONFIG_VIDEO_SANDBOX_SDL +#define CONFIG_CMD_BMP +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_CONSOLE_MUX +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define LCD_BPP LCD_COLOR16 + +#define CONFIG_EXTRA_ENV_SETTINGS "stdin=serial,cros-ec-keyb\0" \ + "stdout=serial,lcd\0" \ + "stderr=serial,lcd\0" #define CONFIG_GZIP_COMPRESSED #define CONFIG_BZIP2 diff --git a/include/configs/stamp9g20.h b/include/configs/stamp9g20.h index 51339b1..01085dc 100644 --- a/include/configs/stamp9g20.h +++ b/include/configs/stamp9g20.h @@ -140,7 +140,10 @@ * can enable it here if your baseboard features ethernet. */ -/* #define CONFIG_MACB */ +#define CONFIG_MACB +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_MCS7830 #ifdef CONFIG_MACB # define CONFIG_RMII /* use reduced MII inteface */ diff --git a/include/cros_ec.h b/include/cros_ec.h index 1e89f29..1e4d8db 100644 --- a/include/cros_ec.h +++ b/include/cros_ec.h @@ -20,6 +20,7 @@ enum cros_ec_interface_t { CROS_EC_IF_SPI, CROS_EC_IF_I2C, CROS_EC_IF_LPC, /* Intel Low Pin Count interface */ + CROS_EC_IF_SANDBOX, }; /* Our configuration information */ @@ -33,7 +34,7 @@ struct cros_ec_dev { unsigned int bus_num; /* Bus number (for I2C) */ unsigned int max_frequency; /* Maximum interface frequency */ struct fdt_gpio_state ec_int; /* GPIO used as EC interrupt line */ - int cmd_version_is_supported; /* Device supports command versions */ + int protocol_version; /* Protocol version to use */ int optimise_flash_write; /* Don't write erased flash blocks */ /* @@ -63,6 +64,17 @@ struct mbkp_keyscan { uint8_t data[CROS_EC_KEYSCAN_COLS]; }; +/* Holds information about the Chrome EC */ +struct fdt_cros_ec { + struct fmap_entry flash; /* Address and size of EC flash */ + /* + * Byte value of erased flash, or -1 if not known. It is normally + * 0xff but some flash devices use 0 (e.g. STM32Lxxx) + */ + int flash_erase_value; + struct fmap_entry region[EC_FLASH_REGION_COUNT]; +}; + /** * Read the ID of the CROS-EC device * @@ -140,7 +152,7 @@ enum { }; /** - * Set up the Chromium OS matrix keyboard protocol + * Initialise the Chromium OS EC driver * * @param blob Device tree blob containing setup information * @param cros_ecp Returns pointer to the cros_ec device, or NULL if none @@ -157,7 +169,7 @@ int cros_ec_init(const void *blob, struct cros_ec_dev **cros_ecp); * @param info Place to put the info structure */ int cros_ec_info(struct cros_ec_dev *dev, - struct ec_response_cros_ec_info *info); + struct ec_response_mkbp_info *info); /** * Read the host event flags @@ -226,6 +238,7 @@ struct cros_ec_dev *board_get_cros_ec_dev(void); int cros_ec_i2c_init(struct cros_ec_dev *dev, const void *blob); int cros_ec_spi_init(struct cros_ec_dev *dev, const void *blob); int cros_ec_lpc_init(struct cros_ec_dev *dev, const void *blob); +int cros_ec_sandbox_init(struct cros_ec_dev *dev, const void *blob); /** * Read information from the fdt for the i2c cros_ec interface @@ -246,11 +259,19 @@ int cros_ec_i2c_decode_fdt(struct cros_ec_dev *dev, const void *blob); int cros_ec_spi_decode_fdt(struct cros_ec_dev *dev, const void *blob); /** + * Read information from the fdt for the sandbox cros_ec interface + * + * @param dev CROS-EC device + * @param blob Device tree blob + * @return 0 if ok, -1 if we failed to read all required information + */ +int cros_ec_sandbox_decode_fdt(struct cros_ec_dev *dev, const void *blob); + +/** * Check whether the LPC interface supports new-style commands. * * LPC has its own way of doing this, which involves checking LPC values - * visible to the host. Do this, and update dev->cmd_version_is_supported - * accordingly. + * visible to the host. Do this, and update dev->protocol_version accordingly. * * @param dev CROS-EC device to check */ @@ -302,6 +323,21 @@ int cros_ec_spi_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version, uint8_t **dinp, int din_len); /** + * Send a packet to a CROS-EC device and return the response packet. + * + * Expects the request packet to be stored in dev->dout. Stores the response + * packet in dev->din. + * + * @param dev CROS-EC device + * @param out_bytes Size of request packet to output + * @param in_bytes Maximum size of response packet to receive + * @return number of bytes in response packet, or <0 on error + */ +int cros_ec_spi_packet(struct cros_ec_dev *dev, int out_bytes, int in_bytes); +int cros_ec_sandbox_packet(struct cros_ec_dev *dev, int out_bytes, + int in_bytes); + +/** * Dump a block of data for a command. * * @param name Name for data (e.g. 'in', 'out') @@ -431,4 +467,52 @@ int cros_ec_set_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t state); * @return 0 if ok, -1 on error */ int cros_ec_get_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t *state); + +/** + * Initialize the Chrome OS EC at board initialization time. + * + * @return 0 if ok, -ve on error + */ +int cros_ec_board_init(void); + +/** + * Get access to the error reported when cros_ec_board_init() was called + * + * This permits delayed reporting of the EC error if it failed during + * early init. + * + * @return error (0 if there was no error, -ve if there was an error) + */ +int cros_ec_get_error(void); + +/** + * Returns information from the FDT about the Chrome EC flash + * + * @param blob FDT blob to use + * @param config Structure to use to return information + */ +int cros_ec_decode_ec_flash(const void *blob, struct fdt_cros_ec *config); + +/** + * Check the current keyboard state, in case recovery mode is requested. + * This function is for sandbox only. + * + * @param ec CROS-EC device + */ +void cros_ec_check_keyboard(struct cros_ec_dev *dev); + +/* + * Tunnel an I2C transfer to the EC + * + * @param dev CROS-EC device + * @param chip Chip address (7-bit I2C address) + * @param addr Register address to read/write + * @param alen Length of register address in bytes + * @param buffer Buffer containing data to read/write + * @param len Length of buffer + * @param is_read 1 if this is a read, 0 if this is a write + */ +int cros_ec_i2c_xfer(struct cros_ec_dev *dev, uchar chip, uint addr, + int alen, uchar *buffer, int len, int is_read); + #endif diff --git a/include/cros_ec_message.h b/include/cros_ec_message.h index b1da53d..36e2d83 100644 --- a/include/cros_ec_message.h +++ b/include/cros_ec_message.h @@ -23,7 +23,7 @@ enum { MSG_PROTO_BYTES = MSG_HEADER_BYTES + MSG_TRAILER_BYTES, /* Max length of messages */ - MSG_BYTES = EC_HOST_PARAM_SIZE + MSG_PROTO_BYTES, + MSG_BYTES = EC_PROTO2_MAX_PARAM_SIZE + MSG_PROTO_BYTES, }; #endif diff --git a/include/ec_commands.h b/include/ec_commands.h index 12811cc..78baab1 100644 --- a/include/ec_commands.h +++ b/include/ec_commands.h @@ -1,4 +1,4 @@ -/* Copyright (c) 2012 The Chromium OS Authors. All rights reserved. +/* Copyright (c) 2013 The Chromium OS Authors. All rights reserved. * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -42,13 +42,19 @@ #define EC_LPC_ADDR_HOST_CMD 0x204 /* I/O addresses for host command args and params */ -#define EC_LPC_ADDR_HOST_ARGS 0x800 -#define EC_LPC_ADDR_HOST_PARAM 0x804 -#define EC_HOST_PARAM_SIZE 0x0fc /* Size of param area in bytes */ - -/* I/O addresses for host command params, old interface */ -#define EC_LPC_ADDR_OLD_PARAM 0x880 -#define EC_OLD_PARAM_SIZE 0x080 /* Size of param area in bytes */ +/* Protocol version 2 */ +#define EC_LPC_ADDR_HOST_ARGS 0x800 /* And 0x801, 0x802, 0x803 */ +#define EC_LPC_ADDR_HOST_PARAM 0x804 /* For version 2 params; size is + * EC_PROTO2_MAX_PARAM_SIZE */ +/* Protocol version 3 */ +#define EC_LPC_ADDR_HOST_PACKET 0x800 /* Offset of version 3 packet */ +#define EC_LPC_HOST_PACKET_SIZE 0x100 /* Max size of version 3 packet */ + +/* The actual block is 0x800-0x8ff, but some BIOSes think it's 0x880-0x8ff + * and they tell the kernel that so we have to think of it as two parts. */ +#define EC_HOST_CMD_REGION0 0x800 +#define EC_HOST_CMD_REGION1 0x880 +#define EC_HOST_CMD_REGION_SIZE 0x80 /* EC command register bit functions */ #define EC_LPC_CMDR_DATA (1 << 0) /* Data ready for host to read */ @@ -122,8 +128,8 @@ #define EC_SWITCH_LID_OPEN 0x01 #define EC_SWITCH_POWER_BUTTON_PRESSED 0x02 #define EC_SWITCH_WRITE_PROTECT_DISABLED 0x04 -/* Recovery requested via keyboard */ -#define EC_SWITCH_KEYBOARD_RECOVERY 0x08 +/* Was recovery requested via keyboard; now unused. */ +#define EC_SWITCH_IGNORE1 0x08 /* Recovery requested via dedicated signal (from servo board) */ #define EC_SWITCH_DEDICATED_RECOVERY 0x10 /* Was fake developer mode switch; now unused. Remove in next refactor. */ @@ -132,10 +138,13 @@ /* Host command interface flags */ /* Host command interface supports LPC args (LPC interface only) */ #define EC_HOST_CMD_FLAG_LPC_ARGS_SUPPORTED 0x01 +/* Host command interface supports version 3 protocol */ +#define EC_HOST_CMD_FLAG_VERSION_3 0x02 /* Wireless switch flags */ #define EC_WIRELESS_SWITCH_WLAN 0x01 #define EC_WIRELESS_SWITCH_BLUETOOTH 0x02 +#define EC_WIRELESS_SWITCH_WWAN 0x04 /* * This header file is used in coreboot both in C and ACPI code. The ACPI code @@ -191,6 +200,9 @@ enum ec_status { EC_RES_UNAVAILABLE = 9, /* No response available */ EC_RES_TIMEOUT = 10, /* We got a timeout */ EC_RES_OVERFLOW = 11, /* Table / data overflow */ + EC_RES_INVALID_HEADER = 12, /* Header contains invalid data */ + EC_RES_REQUEST_TRUNCATED = 13, /* Didn't get the entire request */ + EC_RES_RESPONSE_TOO_BIG = 14 /* Response was too big to handle */ }; /* @@ -272,6 +284,105 @@ struct ec_lpc_host_args { */ #define EC_HOST_ARGS_FLAG_TO_HOST 0x02 +/*****************************************************************************/ + +/* + * Protocol version 2 for I2C and SPI send a request this way: + * + * 0 EC_CMD_VERSION0 + (command version) + * 1 Command number + * 2 Length of params = N + * 3..N+2 Params, if any + * N+3 8-bit checksum of bytes 0..N+2 + * + * The corresponding response is: + * + * 0 Result code (EC_RES_*) + * 1 Length of params = M + * 2..M+1 Params, if any + * M+2 8-bit checksum of bytes 0..M+1 + */ +#define EC_PROTO2_REQUEST_HEADER_BYTES 3 +#define EC_PROTO2_REQUEST_TRAILER_BYTES 1 +#define EC_PROTO2_REQUEST_OVERHEAD (EC_PROTO2_REQUEST_HEADER_BYTES + \ + EC_PROTO2_REQUEST_TRAILER_BYTES) + +#define EC_PROTO2_RESPONSE_HEADER_BYTES 2 +#define EC_PROTO2_RESPONSE_TRAILER_BYTES 1 +#define EC_PROTO2_RESPONSE_OVERHEAD (EC_PROTO2_RESPONSE_HEADER_BYTES + \ + EC_PROTO2_RESPONSE_TRAILER_BYTES) + +/* Parameter length was limited by the LPC interface */ +#define EC_PROTO2_MAX_PARAM_SIZE 0xfc + +/* Maximum request and response packet sizes for protocol version 2 */ +#define EC_PROTO2_MAX_REQUEST_SIZE (EC_PROTO2_REQUEST_OVERHEAD + \ + EC_PROTO2_MAX_PARAM_SIZE) +#define EC_PROTO2_MAX_RESPONSE_SIZE (EC_PROTO2_RESPONSE_OVERHEAD + \ + EC_PROTO2_MAX_PARAM_SIZE) + +/*****************************************************************************/ + +/* + * Value written to legacy command port / prefix byte to indicate protocol + * 3+ structs are being used. Usage is bus-dependent. + */ +#define EC_COMMAND_PROTOCOL_3 0xda + +#define EC_HOST_REQUEST_VERSION 3 + +/* Version 3 request from host */ +struct ec_host_request { + /* Struct version (=3) + * + * EC will return EC_RES_INVALID_HEADER if it receives a header with a + * version it doesn't know how to parse. + */ + uint8_t struct_version; + + /* + * Checksum of request and data; sum of all bytes including checksum + * should total to 0. + */ + uint8_t checksum; + + /* Command code */ + uint16_t command; + + /* Command version */ + uint8_t command_version; + + /* Unused byte in current protocol version; set to 0 */ + uint8_t reserved; + + /* Length of data which follows this header */ + uint16_t data_len; +} __packed; + +#define EC_HOST_RESPONSE_VERSION 3 + +/* Version 3 response from EC */ +struct ec_host_response { + /* Struct version (=3) */ + uint8_t struct_version; + + /* + * Checksum of response and data; sum of all bytes including checksum + * should total to 0. + */ + uint8_t checksum; + + /* Result code (EC_RES_*) */ + uint16_t result; + + /* Length of data which follows this header */ + uint16_t data_len; + + /* Unused bytes in current protocol version; set to 0 */ + uint16_t reserved; +} __packed; + +/*****************************************************************************/ /* * Notes on commands: * @@ -411,6 +522,46 @@ struct ec_response_get_comms_status { uint32_t flags; /* Mask of enum ec_comms_status */ } __packed; +/* + * Fake a variety of responses, purely for testing purposes. + * FIXME: Would be nice to force checksum errors. + */ +#define EC_CMD_TEST_PROTOCOL 0x0a + +/* Tell the EC what to send back to us. */ +struct ec_params_test_protocol { + uint32_t ec_result; + uint32_t ret_len; + uint8_t buf[32]; +} __packed; + +/* Here it comes... */ +struct ec_response_test_protocol { + uint8_t buf[32]; +} __packed; + +/* Get prococol information */ +#define EC_CMD_GET_PROTOCOL_INFO 0x0b + +/* Flags for ec_response_get_protocol_info.flags */ +/* EC_RES_IN_PROGRESS may be returned if a command is slow */ +#define EC_PROTOCOL_INFO_IN_PROGRESS_SUPPORTED (1 << 0) + +struct ec_response_get_protocol_info { + /* Fields which exist if at least protocol version 3 supported */ + + /* Bitmask of protocol versions supported (1 << n means version n)*/ + uint32_t protocol_versions; + + /* Maximum request packet size, in bytes */ + uint16_t max_request_packet_size; + + /* Maximum response packet size, in bytes */ + uint16_t max_response_packet_size; + + /* Flags; see EC_PROTOCOL_INFO_* */ + uint32_t flags; +} __packed; /*****************************************************************************/ /* Flash commands */ @@ -452,15 +603,15 @@ struct ec_params_flash_read { /* Write flash */ #define EC_CMD_FLASH_WRITE 0x12 +#define EC_VER_FLASH_WRITE 1 + +/* Version 0 of the flash command supported only 64 bytes of data */ +#define EC_FLASH_WRITE_VER0_SIZE 64 struct ec_params_flash_write { uint32_t offset; /* Byte offset to write */ uint32_t size; /* Size to write in bytes */ - /* - * Data to write. Could really use EC_PARAM_SIZE - 8, but tidiest to - * use a power of 2 so writes stay aligned. - */ - uint8_t data[64]; + /* Followed by data to write */ } __packed; /* Erase flash */ @@ -536,7 +687,7 @@ struct ec_response_flash_protect { enum ec_flash_region { /* Region which holds read-only EC image */ - EC_FLASH_REGION_RO, + EC_FLASH_REGION_RO = 0, /* Region which holds rewritable EC image */ EC_FLASH_REGION_RW, /* @@ -544,6 +695,8 @@ enum ec_flash_region { * EC_FLASH_REGION_RO) */ EC_FLASH_REGION_WP_RO, + /* Number of regions */ + EC_FLASH_REGION_COUNT, }; struct ec_params_flash_region_info { @@ -727,6 +880,49 @@ enum lightbar_command { }; /*****************************************************************************/ +/* LED control commands */ + +#define EC_CMD_LED_CONTROL 0x29 + +enum ec_led_id { + EC_LED_ID_BATTERY_LED = 0, + EC_LED_ID_POWER_BUTTON_LED, + EC_LED_ID_ADAPTER_LED, +}; + +/* LED control flags */ +#define EC_LED_FLAGS_QUERY (1 << 0) /* Query LED capability only */ +#define EC_LED_FLAGS_AUTO (1 << 1) /* Switch LED back to automatic control */ + +enum ec_led_colors { + EC_LED_COLOR_RED = 0, + EC_LED_COLOR_GREEN, + EC_LED_COLOR_BLUE, + EC_LED_COLOR_YELLOW, + EC_LED_COLOR_WHITE, + + EC_LED_COLOR_COUNT +}; + +struct ec_params_led_control { + uint8_t led_id; /* Which LED to control */ + uint8_t flags; /* Control flags */ + + uint8_t brightness[EC_LED_COLOR_COUNT]; +} __packed; + +struct ec_response_led_control { + /* + * Available brightness value range. + * + * Range 0 means color channel not present. + * Range 1 means on/off control. + * Other values means the LED is control by PWM. + */ + uint8_t brightness_range[EC_LED_COLOR_COUNT]; +} __packed; + +/*****************************************************************************/ /* Verified boot commands */ /* @@ -914,57 +1110,57 @@ struct ec_params_tmp006_set_calibration { } __packed; /*****************************************************************************/ -/* CROS_EC - Matrix KeyBoard Protocol */ +/* MKBP - Matrix KeyBoard Protocol */ /* * Read key state * - * Returns raw data for keyboard cols; see ec_response_cros_ec_info.cols for + * Returns raw data for keyboard cols; see ec_response_mkbp_info.cols for * expected response size. */ -#define EC_CMD_CROS_EC_STATE 0x60 +#define EC_CMD_MKBP_STATE 0x60 /* Provide information about the matrix : number of rows and columns */ -#define EC_CMD_CROS_EC_INFO 0x61 +#define EC_CMD_MKBP_INFO 0x61 -struct ec_response_cros_ec_info { +struct ec_response_mkbp_info { uint32_t rows; uint32_t cols; uint8_t switches; } __packed; /* Simulate key press */ -#define EC_CMD_CROS_EC_SIMULATE_KEY 0x62 +#define EC_CMD_MKBP_SIMULATE_KEY 0x62 -struct ec_params_cros_ec_simulate_key { +struct ec_params_mkbp_simulate_key { uint8_t col; uint8_t row; uint8_t pressed; } __packed; /* Configure keyboard scanning */ -#define EC_CMD_CROS_EC_SET_CONFIG 0x64 -#define EC_CMD_CROS_EC_GET_CONFIG 0x65 +#define EC_CMD_MKBP_SET_CONFIG 0x64 +#define EC_CMD_MKBP_GET_CONFIG 0x65 /* flags */ -enum cros_ec_config_flags { - EC_CROS_EC_FLAGS_ENABLE = 1, /* Enable keyboard scanning */ +enum mkbp_config_flags { + EC_MKBP_FLAGS_ENABLE = 1, /* Enable keyboard scanning */ }; -enum cros_ec_config_valid { - EC_CROS_EC_VALID_SCAN_PERIOD = 1 << 0, - EC_CROS_EC_VALID_POLL_TIMEOUT = 1 << 1, - EC_CROS_EC_VALID_MIN_POST_SCAN_DELAY = 1 << 3, - EC_CROS_EC_VALID_OUTPUT_SETTLE = 1 << 4, - EC_CROS_EC_VALID_DEBOUNCE_DOWN = 1 << 5, - EC_CROS_EC_VALID_DEBOUNCE_UP = 1 << 6, - EC_CROS_EC_VALID_FIFO_MAX_DEPTH = 1 << 7, +enum mkbp_config_valid { + EC_MKBP_VALID_SCAN_PERIOD = 1 << 0, + EC_MKBP_VALID_POLL_TIMEOUT = 1 << 1, + EC_MKBP_VALID_MIN_POST_SCAN_DELAY = 1 << 3, + EC_MKBP_VALID_OUTPUT_SETTLE = 1 << 4, + EC_MKBP_VALID_DEBOUNCE_DOWN = 1 << 5, + EC_MKBP_VALID_DEBOUNCE_UP = 1 << 6, + EC_MKBP_VALID_FIFO_MAX_DEPTH = 1 << 7, }; /* Configuration for our key scanning algorithm */ -struct ec_cros_ec_config { +struct ec_mkbp_config { uint32_t valid_mask; /* valid fields */ - uint8_t flags; /* some flags (enum cros_ec_config_flags) */ + uint8_t flags; /* some flags (enum mkbp_config_flags) */ uint8_t valid_flags; /* which flags are valid */ uint16_t scan_period_us; /* period between start of scans */ /* revert to interrupt mode after no activity for this long */ @@ -983,12 +1179,12 @@ struct ec_cros_ec_config { uint8_t fifo_max_depth; } __packed; -struct ec_params_cros_ec_set_config { - struct ec_cros_ec_config config; +struct ec_params_mkbp_set_config { + struct ec_mkbp_config config; } __packed; -struct ec_response_cros_ec_get_config { - struct ec_cros_ec_config config; +struct ec_response_mkbp_get_config { + struct ec_mkbp_config config; } __packed; /* Run the key scan emulation */ @@ -1144,7 +1340,7 @@ struct ec_response_gpio_get { #define EC_CMD_I2C_READ 0x94 struct ec_params_i2c_read { - uint16_t addr; + uint16_t addr; /* 8-bit address (7-bit shifted << 1) */ uint8_t read_size; /* Either 8 or 16. */ uint8_t port; uint8_t offset; @@ -1158,7 +1354,7 @@ struct ec_response_i2c_read { struct ec_params_i2c_write { uint16_t data; - uint16_t addr; + uint16_t addr; /* 8-bit address (7-bit shifted << 1) */ uint8_t write_size; /* Either 8 or 16. */ uint8_t port; uint8_t offset; @@ -1242,6 +1438,61 @@ struct ec_response_ldo_get { } __packed; /*****************************************************************************/ +/* Power info. */ + +/* + * Get power info. + */ +#define EC_CMD_POWER_INFO 0x9d + +struct ec_response_power_info { + uint32_t usb_dev_type; + uint16_t voltage_ac; + uint16_t voltage_system; + uint16_t current_system; + uint16_t usb_current_limit; +} __packed; + +/*****************************************************************************/ +/* I2C passthru command */ + +#define EC_CMD_I2C_PASSTHRU 0x9e + +/* Slave address is 10 (not 7) bit */ +#define EC_I2C_FLAG_10BIT (1 << 16) + +/* Read data; if not present, message is a write */ +#define EC_I2C_FLAG_READ (1 << 15) + +/* Mask for address */ +#define EC_I2C_ADDR_MASK 0x3ff + +#define EC_I2C_STATUS_NAK (1 << 0) /* Transfer was not acknowledged */ +#define EC_I2C_STATUS_TIMEOUT (1 << 1) /* Timeout during transfer */ + +/* Any error */ +#define EC_I2C_STATUS_ERROR (EC_I2C_STATUS_NAK | EC_I2C_STATUS_TIMEOUT) + +struct ec_params_i2c_passthru_msg { + uint16_t addr_flags; /* I2C slave address (7 or 10 bits) and flags */ + uint16_t len; /* Number of bytes to read or write */ +} __packed; + +struct ec_params_i2c_passthru { + uint8_t port; /* I2C port number */ + uint8_t num_msgs; /* Number of messages */ + struct ec_params_i2c_passthru_msg msg[]; + /* Data to write for all messages is concatenated here */ +} __packed; + +struct ec_response_i2c_passthru { + uint8_t i2c_status; /* Status flags (EC_I2C_STATUS_...) */ + uint8_t num_msgs; /* Number of messages processed */ + uint8_t data[]; /* Data read by messages concatenated here */ +} __packed; + + +/*****************************************************************************/ /* Temporary debug commands. TODO: remove this crosbug.com/p/13849 */ /* @@ -1257,7 +1508,16 @@ struct ec_response_ldo_get { #define EC_CMD_CHARGE_CURRENT_LIMIT 0xa1 struct ec_params_current_limit { - uint32_t limit; + uint32_t limit; /* in mA */ +} __packed; + +/* + * Set maximum external power current. + */ +#define EC_CMD_EXT_POWER_CURRENT_LIMIT 0xa2 + +struct ec_params_ext_power_current_limit { + uint32_t limit; /* in mA */ } __packed; /*****************************************************************************/ diff --git a/include/fdtdec.h b/include/fdtdec.h index 63027bd..3196cf6 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -90,6 +90,8 @@ enum fdt_compat_id { COMPAT_INFINEON_SLB9635_TPM, /* Infineon SLB9635 TPM */ COMPAT_INFINEON_SLB9645_TPM, /* Infineon SLB9645 TPM */ COMPAT_SAMSUNG_EXYNOS5_I2C, /* Exynos5 High Speed I2C Controller */ + COMPAT_SANDBOX_HOST_EMULATION, /* Sandbox emulation of a function */ + COMPAT_SANDBOX_LCD_SDL, /* Sandbox LCD emulation with SDL */ COMPAT_COUNT, }; @@ -532,4 +534,22 @@ const u8 *fdtdec_locate_byte_array(const void *blob, int node, */ int fdtdec_decode_region(const void *blob, int node, const char *prop_name, void **ptrp, size_t *size); + +/* A flash map entry, containing an offset and length */ +struct fmap_entry { + uint32_t offset; + uint32_t length; +}; + +/** + * Read a flash entry from the fdt + * + * @param blob FDT blob + * @param node Offset of node to read + * @param name Name of node being read + * @param entry Place to put offset and size of this node + * @return 0 if ok, -ve on error + */ +int fdtdec_read_fmap_entry(const void *blob, int node, const char *name, + struct fmap_entry *entry); #endif diff --git a/include/lcd.h b/include/lcd.h index d06d6f1..5f84cd3 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -313,6 +313,9 @@ int lcd_get_size(int *line_length); int lcd_dt_simplefb_add_node(void *blob); int lcd_dt_simplefb_enable_existing_node(void *blob); +/* Update the LCD / flush the cache */ +void lcd_sync(void); + /************************************************************************/ /* ** BITMAP DISPLAY SUPPORT */ /************************************************************************/ diff --git a/include/os.h b/include/os.h index fa4e39f..0230a7f 100644 --- a/include/os.h +++ b/include/os.h @@ -103,8 +103,12 @@ void os_exit(int exit_code) __attribute__((noreturn)); /** * Put tty into raw mode to mimic serial console better + * + * @param fd File descriptor of stdin (normally 0) + * @param allow_sigs Allow Ctrl-C, Ctrl-Z to generate signals rather than + * be handled by U-Boot */ -void os_tty_raw(int fd); +void os_tty_raw(int fd, bool allow_sigs); /** * Acquires some memory from the underlying os. @@ -253,4 +257,23 @@ int os_write_ram_buf(const char *fname); */ int os_read_ram_buf(const char *fname); +/** + * Jump to a new executable image + * + * This uses exec() to run a new executable image, after putting it in a + * temporary file. The same arguments and environment are passed to this + * new image, with the addition of: + * + * -j <filename> Specifies the filename the image was written to. The + * calling image may want to delete this at some point. + * -m <filename> Specifies the file containing the sandbox memory + * (ram_buf) from this image, so that the new image can + * have access to this. It also means that the original + * memory filename passed to U-Boot will be left intact. + * + * @param dest Buffer containing executable image + * @param size Size of buffer + */ +int os_jump_to_image(const void *dest, int size); + #endif diff --git a/include/sound.h b/include/sound.h index a06ab85..155e1b4 100644 --- a/include/sound.h +++ b/include/sound.h @@ -30,6 +30,15 @@ struct sound_codec_info { }; /* + * Generates square wave sound data for 1 second + * + * @param data data buffer pointer + * @param size size of the buffer + * @param freq frequency of the wave + */ +void sound_create_square_wave(unsigned short *data, int size, uint32_t freq); + +/* * Initialises audio sub system * @param blob Pointer of device tree node or NULL if none. * @return int value 0 for success, -1 for error diff --git a/include/usb_ether.h b/include/usb_ether.h index 678c9df..35700a2 100644 --- a/include/usb_ether.h +++ b/include/usb_ether.h @@ -40,23 +40,25 @@ struct ueth_data { }; /* - * Function definitions for each USB ethernet driver go here, bracketed by - * #ifdef CONFIG_USB_ETHER_xxx...#endif + * Function definitions for each USB ethernet driver go here + * (declaration is unconditional, compilation is conditional) */ -#ifdef CONFIG_USB_ETHER_ASIX void asix_eth_before_probe(void); int asix_eth_probe(struct usb_device *dev, unsigned int ifnum, struct ueth_data *ss); int asix_eth_get_info(struct usb_device *dev, struct ueth_data *ss, struct eth_device *eth); -#endif -#ifdef CONFIG_USB_ETHER_SMSC95XX +void mcs7830_eth_before_probe(void); +int mcs7830_eth_probe(struct usb_device *dev, unsigned int ifnum, + struct ueth_data *ss); +int mcs7830_eth_get_info(struct usb_device *dev, struct ueth_data *ss, + struct eth_device *eth); + void smsc95xx_eth_before_probe(void); int smsc95xx_eth_probe(struct usb_device *dev, unsigned int ifnum, struct ueth_data *ss); int smsc95xx_eth_get_info(struct usb_device *dev, struct ueth_data *ss, struct eth_device *eth); -#endif #endif /* __USB_ETHER_H__ */ |