* Rename SBC8560 into sbc8560 for consistency

* Patch by Daniel Poirot, 24 Jun 2004:
  Add support for Wind River's sbc8240 board

* Patches by Yasushi Shoji, 26 Jun 2004:
  - drivers/serial_xuartlite.c: fix "return 0" in void function
  - add microblaze support to mkimage tool

4 files changed, 664 insertions, 1383 deletions

diff --git a/include/configs/SBC8560.h b/include/configs/SBC8560.h
deleted file mode 100644
index cf5ef63..0000000
--- a/include/configs/SBC8560.h
+++ /dev/null
@@ -1,398 +0,0 @@
-/*
- * (C) Copyright 2002,2003 Motorola,Inc.
- * Xianghua Xiao <X.Xiao@motorola.com>
- *
- * (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
- * Added support for Wind River SBC8560 board
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* mpc8560ads board configuration file */
-/* please refer to doc/README.mpc85xx for more info */
-/* make sure you change the MAC address and other network params first,
- * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* High Level Configuration Options */
-#define CONFIG_BOOKE		1	/* BOOKE			*/
-#define CONFIG_E500		1	/* BOOKE e500 family		*/
-#define CONFIG_MPC85xx		1	/* MPC8540/MPC8560		*/
-#define CONFIG_MPC85xx_REV1	1	/* MPC85xx Rev 1.0 chip		*/
-
-
-#define CONFIG_MPC8560		1	/* MPC8560 specific		*/
-#define CONFIG_SBC8560		1	/* configuration for SBC8560 board */
-
-/* XXX flagging this as something I might want to delete */
-#define CONFIG_MPC8560ADS	1	/* MPC8560ADS board specific	*/
-
-#define CONFIG_TSEC_ENET		/* tsec ethernet support	*/
-#undef	CONFIG_PCI			/* pci ethernet support		*/
-#undef  CONFIG_ETHER_ON_FCC		/* cpm FCC ethernet support	*/
-
-
-#define CONFIG_ENV_OVERWRITE
-
-/* Using Localbus SDRAM to emulate flash before we can program the flash,
- * normally you need a flash-boot image(u-boot.bin), if so undef this.
- */
-#undef CONFIG_RAM_AS_FLASH
-
-#if defined(CONFIG_PCI_66)		/* some PCI card is 33Mhz only	*/
-  #define CONFIG_SYS_CLK_FREQ	66000000/* sysclk for MPC85xx		*/
-#else
-  #define CONFIG_SYS_CLK_FREQ	33000000/* most pci cards are 33Mhz	*/
-#endif
-
-/* below can be toggled for performance analysis. otherwise use default */
-#define CONFIG_L2_CACHE			    /* toggle L2 cache		*/
-#undef	CONFIG_BTB			    /* toggle branch predition	*/
-#undef	CONFIG_ADDR_STREAMING		    /* toggle addr streaming	*/
-
-#define CONFIG_BOARD_EARLY_INIT_F 1	    /* Call board_early_init_f	*/
-
-#undef	CFG_DRAM_TEST			    /* memory test, takes time	*/
-#define CFG_MEMTEST_START	0x00200000  /* memtest region */
-#define CFG_MEMTEST_END		0x00400000
-
-#if (defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) || \
-     defined(CONFIG_PCI) && defined(CONFIG_ETHER_ON_FCC) || \
-     defined(CONFIG_TSEC_ENET) && defined(CONFIG_ETHER_ON_FCC))
-#error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC."
-#endif
-
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default	*/
-
-#if XXX
-  #define CFG_CCSRBAR		0xfdf00000	/* relocated CCSRBAR	*/
-#else
-  #define CFG_CCSRBAR		0xff700000	/* default CCSRBAR	*/
-#endif
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR	*/
-
-#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory	 */
-#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
-#define CFG_SDRAM_SIZE		512		/* DDR is 512MB */
-#define SPD_EEPROM_ADDRESS	0x55		/*  DDR DIMM */
-
-#undef  CONFIG_DDR_ECC				/* only for ECC DDR module	*/
-#undef  CONFIG_SPD_EEPROM			/* Use SPD EEPROM for DDR setup */
-
-#if defined(CONFIG_MPC85xx_REV1)
-  #define CONFIG_DDR_DLL			/* possible DLL fix needed	*/
-#endif
-
-#undef CONFIG_CLOCKS_IN_MHZ
-
-#if defined(CONFIG_RAM_AS_FLASH)
-  #define CFG_LBC_SDRAM_BASE	0xfc000000	/* Localbus SDRAM */
-  #define CFG_FLASH_BASE	0xf8000000      /* start of FLASH 8M  */
-  #define CFG_BR0_PRELIM	0xf8000801      /* port size 8bit */
-  #define CFG_OR0_PRELIM	0xf8000ff7	/* 8MB Flash		*/
-#else /* Boot from real Flash */
-  #define CFG_LBC_SDRAM_BASE	0xf8000000	/* Localbus SDRAM */
-  #define CFG_FLASH_BASE	0xff800000      /* start of FLASH 8M    */
-  #define CFG_BR0_PRELIM	0xff800801      /* port size 8bit      */
-  #define CFG_OR0_PRELIM	0xff800ff7	/* 8MB Flash		*/
-#endif
-#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB	*/
-
-/* local bus definitions */
-#define CFG_BR1_PRELIM		0xe4001801	/* 64M, 32-bit flash */
-#define CFG_OR1_PRELIM		0xfc000ff7
-
-#define CFG_BR2_PRELIM		0x00000000	/* CS2 not used */
-#define CFG_OR2_PRELIM		0x00000000
-
-#define CFG_BR3_PRELIM		0xf0001861	/* 64MB localbus SDRAM	*/
-#define CFG_OR3_PRELIM		0xfc000cc1
-
-#if defined(CONFIG_RAM_AS_FLASH)
-  #define CFG_BR4_PRELIM	0xf4001861	/* 64M localbus SDRAM */
-#else
-  #define CFG_BR4_PRELIM	0xf8001861	/* 64M localbus SDRAM */
-#endif
-#define CFG_OR4_PRELIM		0xfc000cc1
-
-#define CFG_BR5_PRELIM		0xfc000801	/* 16M CS5 misc devices */
-#if 1
-  #define CFG_OR5_PRELIM	0xff000ff7
-#else
-  #define CFG_OR5_PRELIM	0xff0000f0
-#endif
-
-#define CFG_BR6_PRELIM		0xe0001801	/* 64M, 32-bit flash */
-#define CFG_OR6_PRELIM		0xfc000ff7
-#define CFG_LBC_LCRR		0x00030002	/* local bus freq	*/
-#define CFG_LBC_LBCR		0x00000000
-#define CFG_LBC_LSRT		0x20000000
-#define CFG_LBC_MRTPR		0x20000000
-#define CFG_LBC_LSDMR_1		0x2861b723
-#define CFG_LBC_LSDMR_2		0x0861b723
-#define CFG_LBC_LSDMR_3		0x0861b723
-#define CFG_LBC_LSDMR_4		0x1861b723
-#define CFG_LBC_LSDMR_5		0x4061b723
-
-/* just hijack the MOT BCSR def for SBC8560 misc devices */
-#define CFG_BCSR		((CFG_BR5_PRELIM & 0xff000000)|0x00400000)
-/* the size of CS5 needs to be >= 16M for TLB and LAW setups */
-
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0x70000000	/* Initial RAM address	*/
-#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
-
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
-
-/* Serial Port */
-#undef  CONFIG_CONS_ON_SCC			/* define if console on SCC */
-#undef	CONFIG_CONS_NONE			/* define if console on something else */
-
-#define CONFIG_CONS_INDEX	1
-#undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		1843200 /* get_bus_freq(0) */
-#define CONFIG_BAUDRATE		9600
-
-#define CFG_BAUDRATE_TABLE  \
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-
-#define CFG_NS16550_COM1	((CFG_BR5_PRELIM & 0xff000000)+0x00700000)
-#define CFG_NS16550_COM2	((CFG_BR5_PRELIM & 0xff000000)+0x00800000)
-
-/* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
-#endif
-
-/* I2C */
-#define	 CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-
-#define CFG_PCI_MEM_BASE	0xC0000000
-#define CFG_PCI_MEM_PHYS	0xC0000000
-#define CFG_PCI_MEM_SIZE	0x10000000
-
-#if defined(CONFIG_TSEC_ENET)		/* TSEC Ethernet port */
-
-  #define CONFIG_NET_MULTI	1
-  #define CONFIG_PHY_BCM5421S	1	/* GigaBit Ether PHY	     */
-  #define CONFIG_MII		1	/* MII PHY management		*/
-  #define CONFIG_PHY_ADDR	25	/* PHY address			*/
-
-#elif defined(CONFIG_ETHER_ON_FCC)	/* CPM FCC Ethernet */
-
-  #undef  CONFIG_ETHER_NONE		/* define if ether on something else */
-  #define CONFIG_ETHER_ON_FCC2		/* cpm FCC ethernet support	*/
-  #define CONFIG_ETHER_INDEX	2	/* which channel for ether  */
-
-  #if (CONFIG_ETHER_INDEX == 2)
-    /*
-     * - Rx-CLK is CLK13
-     * - Tx-CLK is CLK14
-     * - Select bus for bd/buffers
-     * - Full duplex
-     */
-    #define CFG_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-    #define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-    #define CFG_CPMFCR_RAMTYPE	0
-    #define CFG_FCC_PSMR	(FCC_PSMR_FDE)
-
-  #elif (CONFIG_ETHER_INDEX == 3)
-    /* need more definitions here for FE3 */
-  #endif				/* CONFIG_ETHER_INDEX */
-
-  #define CONFIG_MII			/* MII PHY management */
-  #define CONFIG_BITBANGMII		/* bit-bang MII PHY management	*/
-  /*
-   * GPIO pins used for bit-banged MII communications
-   */
-  #define MDIO_PORT	2		/* Port C */
-  #define MDIO_ACTIVE	(iop->pdir |=  0x00400000)
-  #define MDIO_TRISTATE	(iop->pdir &= ~0x00400000)
-  #define MDIO_READ	((iop->pdat &  0x00400000) != 0)
-
-  #define MDIO(bit)	if(bit) iop->pdat |=  0x00400000; \
-			else	iop->pdat &= ~0x00400000
-
-  #define MDC(bit)	if(bit) iop->pdat |=  0x00200000; \
-			else	iop->pdat &= ~0x00200000
-
-  #define MIIDELAY	udelay(1)
-
-#endif
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant		*/
-#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver		*/
-#if 0
-#define CFG_FLASH_USE_BUFFER_WRITE 1    /* use buffered writes (20x faster)     */
-#define CFG_FLASH_PROTECTION		/* use hardware protection		*/
-#endif
-#define CFG_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	200000		/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	50000		/* Timeout for Flash Write (in ms)	*/
-
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor	*/
-
-#if 0
-/* XXX This doesn't work and I don't want to fix it */
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-  #define CFG_RAMBOOT
-#else
-  #undef  CFG_RAMBOOT
-#endif
-#endif
-
-/* Environment */
-#if !defined(CFG_RAMBOOT)
-  #if defined(CONFIG_RAM_AS_FLASH)
-    #define CFG_ENV_IS_NOWHERE
-    #define CFG_ENV_ADDR	(CFG_FLASH_BASE + 0x100000)
-    #define CFG_ENV_SIZE	0x2000
-  #else
-    #define CFG_ENV_IS_IN_FLASH	1
-    #define CFG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env */
-    #define CFG_ENV_ADDR	(CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
-    #define CFG_ENV_SIZE	0x2000 /* CFG_ENV_SECT_SIZE */
-  #endif
-#else
-  #define CFG_NO_FLASH		1	/* Flash is not usable now	*/
-  #define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only	*/
-  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-  #define CFG_ENV_SIZE		0x2000
-#endif
-
-#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=192.168.0.251:/tftpboot ip=192.168.0.105:192.168.0.251::255.255.255.0:sbc8560:eth0:off console=ttyS0,9600"
-/*#define CONFIG_BOOTARGS      "root=/dev/ram rw console=ttyS0,115200"*/
-#define CONFIG_BOOTCOMMAND	"bootm 0xff800000 0xffa00000"
-#define CONFIG_BOOTDELAY	5	/* -1 disable autoboot */
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
-
-#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
-  #if defined(CONFIG_PCI)
-    #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_PCI | \
-				CFG_CMD_PING | CFG_CMD_I2C) & \
-				 ~(CFG_CMD_ENV | \
-				  CFG_CMD_LOADS ))
-  #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC))
-    #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_MII | \
-				CFG_CMD_PING | CFG_CMD_I2C) & \
-				~(CFG_CMD_ENV))
-  #endif
-#else
-  #if defined(CONFIG_PCI)
-    #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_PCI | \
-				CFG_CMD_PING | CFG_CMD_I2C)
-  #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC))
-    #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_MII | \
-				CFG_CMD_PING | CFG_CMD_I2C)
-  #endif
-#endif
-
-#include <cmd_confdefs.h>
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"SBC8560=> " /* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-  #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-  #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR	0x1000000	/* default load address */
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
-
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-  #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
-
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-  #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-  #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
-#endif
-
-/*Note: change below for your network setting!!! */
-#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
-  #define CONFIG_ETHADDR	00:01:af:07:9b:8a
-  #define CONFIG_ETH1ADDR	00:01:af:07:9b:8b
-  #define CONFIG_ETH2ADDR	00:01:af:07:9b:8c
-#endif
-
-#define CONFIG_SERVERIP		192.168.0.131
-#define CONFIG_IPADDR		192.168.0.105
-#define CONFIG_GATEWAYIP	0.0.0.0
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_HOSTNAME		SBC8560
-#define CONFIG_ROOTPATH		/home/ppc
-#define CONFIG_BOOTFILE		pImage
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/sbc8240.h b/include/configs/sbc8240.h
new file mode 100644
index 0000000..d891e07
--- /dev/null
+++ b/include/configs/sbc8240.h
@@ -0,0 +1,365 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Configuration settings for the sbc8240 board.
+ */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC824X		1
+#define CONFIG_MPC8240		1
+#define CONFIG_WRSBC8240	1
+
+#define CONFIG_CONS_INDEX	1
+#define CONFIG_BAUDRATE		9600
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_PREBOOT  "echo;echo Welcome to U-Boot for the sbc8240;echo;echo Type \"? or help\" to get on-line help;echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_BOOTCOMMAND	"version;echo;tftpboot $loadaddr $loadfile;bootvx"	/* autoboot command	*/
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"bootargs=$fei(0,0)host:/T221ppc/target/config/sbc8240/vxWorks.st " \
+	       "e=192.168.193.102 h=192.168.193.99 u=target pw=hello f=0x08 " \
+	       "tn=sbc8240 o=fei \0" \
+	"env_startaddr=FFF70000\0" \
+	"env_endaddr=FFF7FFFF\0" \
+	"loadfile=vxWorks.st\0" \
+	"loadaddr=0x01000000\0" \
+	"net_load=tftpboot $loadaddr $loadfile\0" \
+	"uboot_startaddr=FFF00000\0" \
+	"uboot_endaddr=FFF3FFFF\0" \
+	"update=tftp $loadaddr /u-boot.bin;" \
+		"protect off $uboot_startaddr $uboot_endaddr;" \
+		"era $uboot_startaddr $uboot_endaddr;" \
+		"cp.b $loadaddr $uboot_startaddr $filesize;" \
+		"protect on $uboot_startaddr $uboot_endaddr\0" \
+	"zapenv=protect off $env_startaddr $env_endaddr;" \
+		"era $env_startaddr $env_endaddr;" \
+		"protect on $env_startaddr $env_endaddr\0"
+
+#define CONFIG_BOOTDELAY	5
+
+#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_COMMANDS	( CONFIG_CMD_DFL | \
+				  CFG_CMD_BSP    | \
+				  CFG_CMD_DIAG   | \
+				  CFG_CMD_ELF    | \
+				  CFG_CMD_ENV    | \
+				  CFG_CMD_FLASH  | \
+				  CFG_CMD_PCI    | \
+				  CFG_CMD_PING   | \
+				  CFG_CMD_SDRAM  | \
+				  0 )
+
+/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
+ */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+
+#if 1
+#define CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
+#endif
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2	"> "
+#endif
+
+#define CONFIG_ETHADDR          DE:AD:BE:EF:01:01    /* Ethernet address */
+#define CONFIG_IPADDR           192.168.193.102
+#define CONFIG_NETMASK          255.255.255.248
+#define CONFIG_SERVERIP         192.168.193.99
+
+#define CONFIG_STATUS_LED               /* Status LED enabled           */
+#define CONFIG_BOARD_SPECIFIC_LED       /* version has board specific leds */
+
+#define STATUS_LED_BIT          0x00000001
+#define STATUS_LED_PERIOD       (CFG_HZ / 2)
+#define STATUS_LED_STATE        STATUS_LED_BLINKING
+#define STATUS_LED_ACTIVE       0       /* LED on for bit == 0  */
+#define STATUS_LED_BOOT         0       /* LED 0 used for boot status */
+
+#ifndef __ASSEMBLY__
+/* LEDs */
+typedef unsigned int led_id_t;
+
+#define __led_toggle(_msk) \
+	do { \
+		*((volatile char *) (CFG_LED_BASE)) ^= (_msk); \
+	} while(0)
+
+#define __led_set(_msk, _st) \
+	do { \
+		if ((_st)) \
+			*((volatile char *) (CFG_LED_BASE)) |= (_msk); \
+		else \
+			*((volatile char *) (CFG_LED_BASE)) &= ~(_msk); \
+	} while(0)
+
+#define __led_init(msk, st) __led_set(msk, st)
+
+#endif
+
+#define CONFIG_MISC_INIT_R
+#define CFG_LED_BASE	0xFFE80000
+
+/* Print Buffer Size
+ */
+#define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+
+#define CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CFG_LOAD_ADDR	0x00100000	/* Default load address		*/
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE	    0x00000000
+#define CFG_FLASH_BASE	    0xFFF00000
+
+#define CFG_RESET_ADDRESS   0xFFF00100
+
+#define CFG_EUMB_ADDR	    0xFCE00000
+
+#define CFG_MONITOR_BASE    TEXT_BASE
+
+#define CFG_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
+#define CFG_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
+
+#define CFG_MEMTEST_START   0x00004000	/* memtest works on		*/
+#define CFG_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/
+
+	/* Maximum amount of RAM.
+	 */
+#define CFG_MAX_RAM_SIZE    0x10000000
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#undef CFG_RAMBOOT
+#else
+#define CFG_RAMBOOT
+#endif
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area
+ */
+
+	/* Size in bytes reserved for initial data
+	 */
+#define CFG_GBL_DATA_SIZE    128
+
+#define CFG_INIT_RAM_ADDR     0x40000000
+#define CFG_INIT_RAM_END      0x1000
+#define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*
+ * NS16550 Configuration
+ */
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+
+#define CFG_NS16550_REG_SIZE	1
+
+#define CFG_NS16550_CLK		3686400
+
+#define CFG_NS16550_COM1	0xFFF80000
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ * For the detail description refer to the MPC8240 user's manual.
+ */
+
+#define CONFIG_SYS_CLK_FREQ  33000000
+#define CFG_HZ		     1000
+#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 3
+
+	/* Bit-field values for MCCR1.
+	 */
+#define CFG_ROMNAL	    0
+#define CFG_ROMFAL	    7
+
+	/* Bit-field values for MCCR2.
+	 */
+#define CFG_REFINT	    430	    /* Refresh interval			*/
+
+	/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
+	 */
+#define CFG_BSTOPRE	    192
+
+	/* Bit-field values for MCCR3.
+	 */
+#define CFG_REFREC	    2	    /* Refresh to activate interval	*/
+#define CFG_RDLAT	    3	    /* Data latancy from read command	*/
+
+	/* Bit-field values for MCCR4.
+	 */
+#define CFG_PRETOACT	    2	    /* Precharge to activate interval	*/
+#define CFG_ACTTOPRE	    5	    /* Activate to Precharge interval	*/
+#define CFG_SDMODE_CAS_LAT  2	    /* SDMODE CAS latancy		*/
+#define CFG_SDMODE_WRAP	    0	    /* SDMODE wrap type			*/
+#define CFG_SDMODE_BURSTLEN 2	    /* SDMODE Burst length		*/
+#define CFG_ACTORW	    2
+#define CFG_REGISTERD_TYPE_BUFFER 1
+
+/* Memory bank settings.
+ * Only bits 20-29 are actually used from these vales to set the
+ * start/end addresses. The upper two bits will always be 0, and the lower
+ * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
+ * address. Refer to the MPC8240 book.
+ */
+
+#define CFG_BANK0_START	    0x00000000
+#define CFG_BANK0_END	    (CFG_MAX_RAM_SIZE - 1)
+#define CFG_BANK0_ENABLE    1
+#define CFG_BANK1_START	    0x3ff00000
+#define CFG_BANK1_END	    0x3fffffff
+#define CFG_BANK1_ENABLE    0
+#define CFG_BANK2_START	    0x3ff00000
+#define CFG_BANK2_END	    0x3fffffff
+#define CFG_BANK2_ENABLE    0
+#define CFG_BANK3_START	    0x3ff00000
+#define CFG_BANK3_END	    0x3fffffff
+#define CFG_BANK3_ENABLE    0
+#define CFG_BANK4_START	    0x3ff00000
+#define CFG_BANK4_END	    0x3fffffff
+#define CFG_BANK4_ENABLE    0
+#define CFG_BANK5_START	    0x3ff00000
+#define CFG_BANK5_END	    0x3fffffff
+#define CFG_BANK5_ENABLE    0
+#define CFG_BANK6_START	    0x3ff00000
+#define CFG_BANK6_END	    0x3fffffff
+#define CFG_BANK6_ENABLE    0
+#define CFG_BANK7_START	    0x3ff00000
+#define CFG_BANK7_END	    0x3fffffff
+#define CFG_BANK7_ENABLE    0
+
+#define CFG_ODCR	    0xff
+
+#define CFG_IBAT0L  (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U  (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+#define CFG_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT3L  (0xFC000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U  (0xFC000000 | BATU_BL_64M | BATU_VS | BATU_VP)
+
+#define CFG_DBAT0L  CFG_IBAT0L
+#define CFG_DBAT0U  CFG_IBAT0U
+#define CFG_DBAT1L  CFG_IBAT1L
+#define CFG_DBAT1U  CFG_IBAT1U
+#define CFG_DBAT2L  CFG_IBAT2L
+#define CFG_DBAT2U  CFG_IBAT2U
+#define CFG_DBAT3L  CFG_IBAT3L
+#define CFG_DBAT3U  CFG_IBAT3U
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
+#define CFG_MAX_FLASH_SECT	256	/* Max number of sectors in one bank	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM      CFG_FLASH_BASE  /* FLASH bank #0        */
+#define FLASH_BASE1_PRELIM      0               /* FLASH bank #1        */
+
+	/* Warining: environment is not EMBEDDED in the U-Boot code.
+	 * It's stored in flash separately.
+	 */
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		0xFFF70000
+#define CFG_ENV_SIZE		0x4000	/* Size of the Environment		*/
+#define CFG_ENV_OFFSET		0	/* starting right at the beginning	*/
+#define CFG_ENV_SECT_SIZE	0x40000 /* Size of the Environment Sector	*/
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_PCI			/* include pci support			*/
+#define CONFIG_PCI_PNP                  /* we need Plug 'n Play */
+#define CONFIG_NET_MULTI		/* Multi ethernet cards support */
+#define CONFIG_TULIP
+#define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER	8       /* use 8 rx buffer on eepro100  */
+#endif /* __CONFIG_H */
diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h
index 251d62a..cf5ef63 100644
--- a/include/configs/sbc8260.h
+++ b/include/configs/sbc8260.h
@@ -1,17 +1,9 @@
 /*
- * (C) Copyright 2000
- * Murray Jensen <Murray.Jensen@cmst.csiro.au>
+ * (C) Copyright 2002,2003 Motorola,Inc.
+ * Xianghua Xiao <X.Xiao@motorola.com>
  *
- * (C) Copyright 2000
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2001
- * Advent Networks, Inc. <http://www.adventnetworks.com>
- * Jay Monkman <jtm@smoothsmoothie.com>
- *
- * Configuration settings for the WindRiver SBC8260 board.
- *	See http://www.windriver.com/products/html/sbc8260.html
+ * (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
+ * Added support for Wind River SBC8560 board
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -32,1056 +24,375 @@
  * MA 02111-1307 USA
  */
 
+/* mpc8560ads board configuration file */
+/* please refer to doc/README.mpc85xx for more info */
+/* make sure you change the MAC address and other network params first,
+ * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
+ */
+
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* Enable debug prints */
-#undef DEBUG		      /* General debug */
-#undef DEBUG_BOOTP_EXT	      /* Debug received vendor fields */
+/* High Level Configuration Options */
+#define CONFIG_BOOKE		1	/* BOOKE			*/
+#define CONFIG_E500		1	/* BOOKE e500 family		*/
+#define CONFIG_MPC85xx		1	/* MPC8540/MPC8560		*/
+#define CONFIG_MPC85xx_REV1	1	/* MPC85xx Rev 1.0 chip		*/
 
-/*****************************************************************************
- *
- * These settings must match the way _your_ board is set up
- *
- *****************************************************************************/
 
-/* What is the oscillator's (UX2) frequency in Hz? */
-#define CONFIG_8260_CLKIN  (66 * 1000 * 1000)
-
-/*-----------------------------------------------------------------------
- * MODCK_H & MODCLK[1-3] - Ref: Section 9.2 in MPC8206 User Manual
- *-----------------------------------------------------------------------
- * What should MODCK_H be? It is dependent on the oscillator
- * frequency, MODCK[1-3], and desired CPM and core frequencies.
- * Here are some example values (all frequencies are in MHz):
- *
- * MODCK_H   MODCK[1-3]	 Osc	CPM    Core  S2-6   S2-7   S2-8
- * -------   ----------	 ---	---    ----  -----  -----  -----
- * 0x1	     0x5	 33	100    133   Open   Close  Open
- * 0x1	     0x6	 33	100    166   Open   Open   Close
- * 0x1	     0x7	 33	100    200   Open   Open   Open
- *
- * 0x2	     0x2	 33	133    133   Close  Open   Close
- * 0x2	     0x3	 33	133    166   Close  Open   Open
- * 0x2	     0x4	 33	133    200   Open   Close  Close
- * 0x2	     0x5	 33	133    233   Open   Close  Open
- * 0x2	     0x6	 33	133    266   Open   Open   Close
- *
- * 0x5	     0x5	 66	133    133   Open   Close  Open
- * 0x5	     0x6	 66	133    166   Open   Open   Close
- * 0x5	     0x7	 66	133    200   Open   Open   Open
- * 0x6	     0x0	 66	133    233   Close  Close  Close
- * 0x6	     0x1	 66	133    266   Close  Close  Open
- * 0x6	     0x2	 66	133    300   Close  Open   Close
- */
-#define CFG_SBC_MODCK_H 0x05
+#define CONFIG_MPC8560		1	/* MPC8560 specific		*/
+#define CONFIG_SBC8560		1	/* configuration for SBC8560 board */
 
-/* Define this if you want to boot from 0x00000100. If you don't define
- * this, you will need to program the bootloader to 0xfff00000, and
- * get the hardware reset config words at 0xfe000000. The simplest
- * way to do that is to program the bootloader at both addresses.
- * It is suggested that you just let U-Boot live at 0x00000000.
- */
-#define CFG_SBC_BOOT_LOW 1
+/* XXX flagging this as something I might want to delete */
+#define CONFIG_MPC8560ADS	1	/* MPC8560ADS board specific	*/
 
-/* What should the base address of the main FLASH be and how big is
- * it (in MBytes)? This must contain TEXT_BASE from board/sbc8260/config.mk
- * The main FLASH is whichever is connected to *CS0. U-Boot expects
- * this to be the SIMM.
- */
-#define CFG_FLASH0_BASE 0x40000000
-#define CFG_FLASH0_SIZE 4
+#define CONFIG_TSEC_ENET		/* tsec ethernet support	*/
+#undef	CONFIG_PCI			/* pci ethernet support		*/
+#undef  CONFIG_ETHER_ON_FCC		/* cpm FCC ethernet support	*/
 
-/* What should the base address of the secondary FLASH be and how big
- * is it (in Mbytes)? The secondary FLASH is whichever is connected
- * to *CS6. U-Boot expects this to be the on board FLASH. If you don't
- * want it enabled, don't define these constants.
- */
-#define CFG_FLASH1_BASE 0x60000000
-#define CFG_FLASH1_SIZE 2
 
-/* What should be the base address of SDRAM DIMM and how big is
- * it (in Mbytes)?
-*/
-#define CFG_SDRAM0_BASE 0x00000000
-#define CFG_SDRAM0_SIZE 64
+#define CONFIG_ENV_OVERWRITE
 
-/* What should be the base address of the LEDs and switch S0?
- * If you don't want them enabled, don't define this.
+/* Using Localbus SDRAM to emulate flash before we can program the flash,
+ * normally you need a flash-boot image(u-boot.bin), if so undef this.
  */
-#define CFG_LED_BASE 0xa0000000
+#undef CONFIG_RAM_AS_FLASH
 
+#if defined(CONFIG_PCI_66)		/* some PCI card is 33Mhz only	*/
+  #define CONFIG_SYS_CLK_FREQ	66000000/* sysclk for MPC85xx		*/
+#else
+  #define CONFIG_SYS_CLK_FREQ	33000000/* most pci cards are 33Mhz	*/
+#endif
 
-/*
- * SBC8260 with 16 MB DIMM:
- *
- *     0x0000 0000     Exception Vector code, 8k
- *	     :
- *     0x0000 1FFF
- *     0x0000 2000     Free for Application Use
- *	     :
- *	     :
- *
- *	     :
- *	     :
- *     0x00F5 FF30     Monitor Stack (Growing downward)
- *		       Monitor Stack Buffer (0x80)
- *     0x00F5 FFB0     Board Info Data
- *     0x00F6 0000     Malloc Arena
- *	     :		    CFG_ENV_SECT_SIZE, 256k
- *	     :		    CFG_MALLOC_LEN,    128k
- *     0x00FC 0000     RAM Copy of Monitor Code
- *	     :		    CFG_MONITOR_LEN,   256k
- *     0x00FF FFFF     [End of RAM], CFG_SDRAM_SIZE - 1
- */
+/* below can be toggled for performance analysis. otherwise use default */
+#define CONFIG_L2_CACHE			    /* toggle L2 cache		*/
+#undef	CONFIG_BTB			    /* toggle branch predition	*/
+#undef	CONFIG_ADDR_STREAMING		    /* toggle addr streaming	*/
 
-/*
- * SBC8260 with 64 MB DIMM:
- *
- *     0x0000 0000     Exception Vector code, 8k
- *	     :
- *     0x0000 1FFF
- *     0x0000 2000     Free for Application Use
- *	     :
- *	     :
- *
- *	     :
- *	     :
- *     0x03F5 FF30     Monitor Stack (Growing downward)
- *		       Monitor Stack Buffer (0x80)
- *     0x03F5 FFB0     Board Info Data
- *     0x03F6 0000     Malloc Arena
- *	     :		    CFG_ENV_SECT_SIZE, 256k
- *	     :		    CFG_MALLOC_LEN,    128k
- *     0x03FC 0000     RAM Copy of Monitor Code
- *	     :		    CFG_MONITOR_LEN,   256k
- *     0x03FF FFFF     [End of RAM], CFG_SDRAM_SIZE - 1
- */
+#define CONFIG_BOARD_EARLY_INIT_F 1	    /* Call board_early_init_f	*/
 
+#undef	CFG_DRAM_TEST			    /* memory test, takes time	*/
+#define CFG_MEMTEST_START	0x00200000  /* memtest region */
+#define CFG_MEMTEST_END		0x00400000
 
-/*
- * select serial console configuration
- *
- * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- *
- * if CONFIG_CONS_NONE is defined, then the serial console routines must
- * defined elsewhere.
- */
-#define CONFIG_CONS_ON_SMC	1	/* define if console on SMC */
-#undef	CONFIG_CONS_ON_SCC		/* define if console on SCC */
-#undef	CONFIG_CONS_NONE		/* define if console on neither */
-#define CONFIG_CONS_INDEX	1	/* which SMC/SCC channel for console */
+#if (defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) || \
+     defined(CONFIG_PCI) && defined(CONFIG_ETHER_ON_FCC) || \
+     defined(CONFIG_TSEC_ENET) && defined(CONFIG_ETHER_ON_FCC))
+#error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC."
+#endif
 
 /*
- * select ethernet configuration
- *
- * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
- * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
- * for FCC)
- *
- * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
  */
+#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default	*/
 
-#undef	CONFIG_ETHER_ON_SCC
-#define CONFIG_ETHER_ON_FCC
-#undef	CONFIG_ETHER_NONE		/* define if ethernet on neither */
-
-#ifdef	CONFIG_ETHER_ON_SCC
-#define CONFIG_ETHER_INDEX	1	/* which SCC/FCC channel for ethernet */
-#endif	/* CONFIG_ETHER_ON_SCC */
-
-#ifdef	CONFIG_ETHER_ON_FCC
-#define CONFIG_ETHER_INDEX	2	/* which SCC/FCC channel for ethernet */
-#undef	CONFIG_ETHER_LOOPBACK_TEST	/* Ethernet external loopback test */
-#define CONFIG_MII			/* MII PHY management		*/
-#define CONFIG_BITBANGMII		/* bit-bang MII PHY management	*/
-/*
- * Port pins used for bit-banged MII communictions (if applicable).
- */
-#define MDIO_PORT	2	/* Port C */
-#define MDIO_ACTIVE	(iop->pdir |=  0x00400000)
-#define MDIO_TRISTATE	(iop->pdir &= ~0x00400000)
-#define MDIO_READ	((iop->pdat &  0x00400000) != 0)
+#if XXX
+  #define CFG_CCSRBAR		0xfdf00000	/* relocated CCSRBAR	*/
+#else
+  #define CFG_CCSRBAR		0xff700000	/* default CCSRBAR	*/
+#endif
+#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR	*/
 
-#define MDIO(bit)	if(bit) iop->pdat |=  0x00400000; \
-			else	iop->pdat &= ~0x00400000
+#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory	 */
+#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CFG_SDRAM_SIZE		512		/* DDR is 512MB */
+#define SPD_EEPROM_ADDRESS	0x55		/*  DDR DIMM */
 
-#define MDC(bit)	if(bit) iop->pdat |=  0x00200000; \
-			else	iop->pdat &= ~0x00200000
+#undef  CONFIG_DDR_ECC				/* only for ECC DDR module	*/
+#undef  CONFIG_SPD_EEPROM			/* Use SPD EEPROM for DDR setup */
 
-#define MIIDELAY	udelay(1)
-#endif	/* CONFIG_ETHER_ON_FCC */
+#if defined(CONFIG_MPC85xx_REV1)
+  #define CONFIG_DDR_DLL			/* possible DLL fix needed	*/
+#endif
 
-#if defined(CONFIG_ETHER_ON_SCC) && (CONFIG_ETHER_INDEX == 1)
+#undef CONFIG_CLOCKS_IN_MHZ
+
+#if defined(CONFIG_RAM_AS_FLASH)
+  #define CFG_LBC_SDRAM_BASE	0xfc000000	/* Localbus SDRAM */
+  #define CFG_FLASH_BASE	0xf8000000      /* start of FLASH 8M  */
+  #define CFG_BR0_PRELIM	0xf8000801      /* port size 8bit */
+  #define CFG_OR0_PRELIM	0xf8000ff7	/* 8MB Flash		*/
+#else /* Boot from real Flash */
+  #define CFG_LBC_SDRAM_BASE	0xf8000000	/* Localbus SDRAM */
+  #define CFG_FLASH_BASE	0xff800000      /* start of FLASH 8M    */
+  #define CFG_BR0_PRELIM	0xff800801      /* port size 8bit      */
+  #define CFG_OR0_PRELIM	0xff800ff7	/* 8MB Flash		*/
+#endif
+#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB	*/
 
-/*
- *  - RX clk is CLK11
- *  - TX clk is CLK12
- */
-# define CFG_CMXSCR_VALUE	(CMXSCR_RS1CS_CLK11  | CMXSCR_TS1CS_CLK12)
+/* local bus definitions */
+#define CFG_BR1_PRELIM		0xe4001801	/* 64M, 32-bit flash */
+#define CFG_OR1_PRELIM		0xfc000ff7
 
-#elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
+#define CFG_BR2_PRELIM		0x00000000	/* CS2 not used */
+#define CFG_OR2_PRELIM		0x00000000
 
-/*
- * - Rx-CLK is CLK13
- * - Tx-CLK is CLK14
- * - Select bus for bd/buffers (see 28-13)
- * - Enable Full Duplex in FSMR
- */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
-# define CFG_CPMFCR_RAMTYPE	0
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+#define CFG_BR3_PRELIM		0xf0001861	/* 64MB localbus SDRAM	*/
+#define CFG_OR3_PRELIM		0xfc000cc1
 
-#endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */
+#if defined(CONFIG_RAM_AS_FLASH)
+  #define CFG_BR4_PRELIM	0xf4001861	/* 64M localbus SDRAM */
+#else
+  #define CFG_BR4_PRELIM	0xf8001861	/* 64M localbus SDRAM */
+#endif
+#define CFG_OR4_PRELIM		0xfc000cc1
 
-/*
- * Select SPI support configuration
- */
-#undef  CONFIG_SPI			/* Disable SPI driver */
+#define CFG_BR5_PRELIM		0xfc000801	/* 16M CS5 misc devices */
+#if 1
+  #define CFG_OR5_PRELIM	0xff000ff7
+#else
+  #define CFG_OR5_PRELIM	0xff0000f0
+#endif
 
-/*
- * Select i2c support configuration
- *
- * Supported configurations are {none, software, hardware} drivers.
- * If the software driver is chosen, there are some additional
- * configuration items that the driver uses to drive the port pins.
- */
-#undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CFG_BR6_PRELIM		0xe0001801	/* 64M, 32-bit flash */
+#define CFG_OR6_PRELIM		0xfc000ff7
+#define CFG_LBC_LCRR		0x00030002	/* local bus freq	*/
+#define CFG_LBC_LBCR		0x00000000
+#define CFG_LBC_LSRT		0x20000000
+#define CFG_LBC_MRTPR		0x20000000
+#define CFG_LBC_LSDMR_1		0x2861b723
+#define CFG_LBC_LSDMR_2		0x0861b723
+#define CFG_LBC_LSDMR_3		0x0861b723
+#define CFG_LBC_LSDMR_4		0x1861b723
+#define CFG_LBC_LSDMR_5		0x4061b723
+
+/* just hijack the MOT BCSR def for SBC8560 misc devices */
+#define CFG_BCSR		((CFG_BR5_PRELIM & 0xff000000)|0x00400000)
+/* the size of CS5 needs to be >= 16M for TLB and LAW setups */
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK	1
+#define CFG_INIT_RAM_ADDR	0x70000000	/* Initial RAM address	*/
+#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
-/*
- * Software (bit-bang) I2C driver configuration
- */
-#ifdef CONFIG_SOFT_I2C
-#define I2C_PORT	3		/* Port A=0, B=1, C=2, D=3 */
-#define I2C_ACTIVE	(iop->pdir |=  0x00010000)
-#define I2C_TRISTATE	(iop->pdir &= ~0x00010000)
-#define I2C_READ	((iop->pdat & 0x00010000) != 0)
-#define I2C_SDA(bit)	if(bit) iop->pdat |=  0x00010000; \
-			else    iop->pdat &= ~0x00010000
-#define I2C_SCL(bit)	if(bit) iop->pdat |=  0x00020000; \
-			else    iop->pdat &= ~0x00020000
-#define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
-
-
-/* Define this to reserve an entire FLASH sector (256 KB) for
- * environment variables. Otherwise, the environment will be
- * put in the same sector as U-Boot, and changing variables
- * will erase U-Boot temporarily
- */
-#define CFG_ENV_IN_OWN_SECT	1
+#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
 
-/* Define to allow the user to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
+/* Serial Port */
+#undef  CONFIG_CONS_ON_SCC			/* define if console on SCC */
+#undef	CONFIG_CONS_NONE			/* define if console on something else */
 
-/* What should the console's baud rate be? */
+#define CONFIG_CONS_INDEX	1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		1843200 /* get_bus_freq(0) */
 #define CONFIG_BAUDRATE		9600
 
-/* Ethernet MAC address
- *     Note: We are using the EST Corporation OUI (00:a0:1e:xx:xx:xx)
- *           http://standards.ieee.org/regauth/oui/index.shtml
- */
-#define CONFIG_ETHADDR		00:a0:1e:a8:7b:cb
-
-/*
- * Define this to set the last octet of the ethernet address from the
- * DS0-DS7 switch and light the LEDs with the result. The DS0-DS7
- * switch and the LEDs are backwards with respect to each other. DS7
- * is on the board edge side of both the LED strip and the DS0-DS7
- * switch.
- */
-#undef	CONFIG_MISC_INIT_R
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-/* Set to a positive value to delay for running BOOTCOMMAND */
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
+#define CFG_NS16550_COM1	((CFG_BR5_PRELIM & 0xff000000)+0x00700000)
+#define CFG_NS16550_COM2	((CFG_BR5_PRELIM & 0xff000000)+0x00800000)
 
-/* Be selective on what keys can delay or stop the autoboot process
- *     To stop	use: " "
- */
-#undef CONFIG_AUTOBOOT_KEYED
-#ifdef CONFIG_AUTOBOOT_KEYED
-#   define CONFIG_AUTOBOOT_PROMPT	"Autobooting in %d seconds, press \" \" to stop\n"
-#   define CONFIG_AUTOBOOT_STOP_STR	" "
-#   undef  CONFIG_AUTOBOOT_DELAY_STR
-#   define DEBUG_BOOTKEYS		0
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef	CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
-/* Define this to contain any number of null terminated strings that
- * will be part of the default enviroment compiled into the boot image.
- *
- * Variable		Usage
- * --------------       -------------------------------------------------------
- * serverip		server IP address
- * ipaddr		my IP address
- * reprog		Reload flash with a new copy of U-Boot
- * zapenv		Erase the environment area in flash
- * root-on-initrd       Set the bootcmd variable to allow booting of an initial
- *                      ram disk.
- * root-on-nfs          Set the bootcmd variable to allow booting of a NFS
- *                      mounted root filesystem.
- * boot-hook            Convenient stub to do something useful before the
- *                      bootm command is executed.
- *
- * Example usage of root-on-initrd and root-on-nfs :
- *
- * Note: The lines have been wrapped to improved its readability.
- *
- * => printenv bootcmd
- * bootcmd=version;echo;bootp;setenv bootargs root=/dev/nfs rw
- * nfsroot=$(serverip):$(rootpath)
- * ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;run boot-hook;bootm
- *
- * => run root-on-initrd
- * => printenv bootcmd
- * bootcmd=version;echo;bootp;setenv bootargs root=/dev/ram0 rw
- * ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;run boot-hook;bootm
- *
- * => run root-on-nfs
- * => printenv bootcmd
- * bootcmd=version;echo;bootp;setenv bootargs root=/dev/nfs rw
- * nfsroot=$(serverip):$(rootpath)
- * ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;run boot-hook;bootm
- *
- */
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"serverip=192.168.123.205\0\0" \
-	"ipaddr=192.168.123.213\0" \
-	"reprog="\
-		"bootp;" \
-		"tftpboot 0x140000 /bdi2000/u-boot.bin;" \
-		"protect off 1:0;" \
-		"erase 1:0;" \
-		"cp.b 140000 40000000 $(filesize);" \
-		"protect on 1:0\0" \
-	"zapenv="\
-		"protect off 1:1;" \
-		"erase 1:1;" \
-		"protect on 1:1\0" \
-	"root-on-initrd="\
-		"setenv bootcmd "\
-		"version;" \
-		"echo;" \
-		"bootp;" \
-		"setenv bootargs root=/dev/ram0 rw " \
-		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
-		"run boot-hook;" \
-		"bootm\0" \
-	"root-on-nfs="\
-		"setenv bootcmd "\
-		"version;" \
-		"echo;" \
-		"bootp;" \
-		"setenv bootargs root=/dev/nfs rw " \
-		"nfsroot=$(serverip):$(rootpath) " \
-		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
-		"run boot-hook;" \
-		"bootm\0" \
-	"boot-hook=echo\0"
-
-/* Define a command string that is automatically executed when no character
- * is read on the console interface withing "Boot Delay" after reset.
- */
-#undef	CONFIG_BOOT_ROOT_INITRD 	/* Use ram disk for the root file system */
-#define	CONFIG_BOOT_ROOT_NFS		/* Use a NFS mounted root file system */
-
-#ifdef CONFIG_BOOT_ROOT_INITRD
-#define CONFIG_BOOTCOMMAND \
-	"version;" \
-	"echo;" \
-	"bootp;" \
-	"setenv bootargs root=/dev/ram0 rw " \
-	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
-	"bootm"
-#endif /* CONFIG_BOOT_ROOT_INITRD */
-
-#ifdef CONFIG_BOOT_ROOT_NFS
-#define CONFIG_BOOTCOMMAND \
-	"version;" \
-	"echo;" \
-	"bootp;" \
-	"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
-	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
-	"bootm"
-#endif /* CONFIG_BOOT_ROOT_NFS */
-
-/* Add support for a few extra bootp options like:
- *	- File size
- *	- DNS (up to 2 servers)
- *	- Send hostname to DHCP server
- */
-#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | \
-				 CONFIG_BOOTP_BOOTFILESIZE | \
-				 CONFIG_BOOTP_DNS  | \
-				 CONFIG_BOOTP_DNS2 | \
-				 CONFIG_BOOTP_SEND_HOSTNAME)
+/* I2C */
+#define	 CONFIG_HARD_I2C		/* I2C with hardware support*/
+#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+
+#define CFG_PCI_MEM_BASE	0xC0000000
+#define CFG_PCI_MEM_PHYS	0xC0000000
+#define CFG_PCI_MEM_SIZE	0x10000000
+
+#if defined(CONFIG_TSEC_ENET)		/* TSEC Ethernet port */
+
+  #define CONFIG_NET_MULTI	1
+  #define CONFIG_PHY_BCM5421S	1	/* GigaBit Ether PHY	     */
+  #define CONFIG_MII		1	/* MII PHY management		*/
+  #define CONFIG_PHY_ADDR	25	/* PHY address			*/
+
+#elif defined(CONFIG_ETHER_ON_FCC)	/* CPM FCC Ethernet */
+
+  #undef  CONFIG_ETHER_NONE		/* define if ether on something else */
+  #define CONFIG_ETHER_ON_FCC2		/* cpm FCC ethernet support	*/
+  #define CONFIG_ETHER_INDEX	2	/* which channel for ether  */
+
+  #if (CONFIG_ETHER_INDEX == 2)
+    /*
+     * - Rx-CLK is CLK13
+     * - Tx-CLK is CLK14
+     * - Select bus for bd/buffers
+     * - Full duplex
+     */
+    #define CFG_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+    #define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+    #define CFG_CPMFCR_RAMTYPE	0
+    #define CFG_FCC_PSMR	(FCC_PSMR_FDE)
+
+  #elif (CONFIG_ETHER_INDEX == 3)
+    /* need more definitions here for FE3 */
+  #endif				/* CONFIG_ETHER_INDEX */
+
+  #define CONFIG_MII			/* MII PHY management */
+  #define CONFIG_BITBANGMII		/* bit-bang MII PHY management	*/
+  /*
+   * GPIO pins used for bit-banged MII communications
+   */
+  #define MDIO_PORT	2		/* Port C */
+  #define MDIO_ACTIVE	(iop->pdir |=  0x00400000)
+  #define MDIO_TRISTATE	(iop->pdir &= ~0x00400000)
+  #define MDIO_READ	((iop->pdat &  0x00400000) != 0)
+
+  #define MDIO(bit)	if(bit) iop->pdat |=  0x00400000; \
+			else	iop->pdat &= ~0x00400000
 
-/* undef this to save memory */
-#define CFG_LONGHELP
+  #define MDC(bit)	if(bit) iop->pdat |=  0x00200000; \
+			else	iop->pdat &= ~0x00200000
 
-/* Monitor Command Prompt */
-#define CFG_PROMPT		"=> "
+  #define MIIDELAY	udelay(1)
 
-#undef  CFG_HUSH_PARSER
-#ifdef  CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
 #endif
 
-/* When CONFIG_TIMESTAMP is selected, the timestamp (date and time)
- * of an image is printed by image commands like bootm or iminfo.
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
  */
-#define CONFIG_TIMESTAMP
 
-/* If this variable is defined, an environment variable named "ver"
- * is created by U-Boot showing the U-Boot version.
- */
-#define CONFIG_VERSION_VARIABLE
-
-/* What U-Boot subsytems do you want enabled? */
-#ifdef CONFIG_ETHER_ON_FCC
-# define CONFIG_COMMANDS	(((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
-				CFG_CMD_ASKENV	| \
-				CFG_CMD_ECHO	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_IMMAP	| \
-				CFG_CMD_MII	| \
-				CFG_CMD_PING	| \
-				CFG_CMD_REGINFO | \
-				CFG_CMD_SDRAM   )
-#else
-# define CONFIG_COMMANDS	(((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
-				CFG_CMD_ASKENV	| \
-				CFG_CMD_ECHO	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_IMMAP	| \
-				CFG_CMD_PING	| \
-				CFG_CMD_REGINFO | \
-				CFG_CMD_SDRAM   )
-#endif /* CONFIG_ETHER_ON_FCC */
-
-#undef CONFIG_WATCHDOG				/* disable the watchdog */
-
-/* Where do the internal registers live? */
-#define CFG_IMMR		0xF0000000
-
-/*****************************************************************************
- *
- * You should not have to modify any of the following settings
- *
- *****************************************************************************/
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant		*/
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver		*/
+#if 0
+#define CFG_FLASH_USE_BUFFER_WRITE 1    /* use buffered writes (20x faster)     */
+#define CFG_FLASH_PROTECTION		/* use hardware protection		*/
+#endif
+#define CFG_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
 
-#define CONFIG_MPC8260		1	/* This is an MPC8260 CPU   */
-#define CONFIG_SBC8260		1	/* on an EST SBC8260 Board  */
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	200000		/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	50000		/* Timeout for Flash Write (in ms)	*/
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor	*/
 
-/*
- * Miscellaneous configurable options
- */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CBSIZE		1024	/* Console I/O Buffer Size	     */
+#if 0
+/* XXX This doesn't work and I don't want to fix it */
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+  #define CFG_RAMBOOT
 #else
-#  define CFG_CBSIZE		256	/* Console I/O Buffer Size	     */
+  #undef  CFG_RAMBOOT
+#endif
 #endif
 
-/* Print Buffer Size */
-#define CFG_PBSIZE	  (CFG_CBSIZE + sizeof(CFG_PROMPT)+16)
-
-#define CFG_MAXARGS		32	/* max number of command args	*/
-
-#define CFG_BARGSIZE		CFG_CBSIZE /* Boot Argument Buffer Size	   */
-
-#define CFG_LOAD_ADDR		0x400000   /* default load address */
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+/* Environment */
+#if !defined(CFG_RAMBOOT)
+  #if defined(CONFIG_RAM_AS_FLASH)
+    #define CFG_ENV_IS_NOWHERE
+    #define CFG_ENV_ADDR	(CFG_FLASH_BASE + 0x100000)
+    #define CFG_ENV_SIZE	0x2000
+  #else
+    #define CFG_ENV_IS_IN_FLASH	1
+    #define CFG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env */
+    #define CFG_ENV_ADDR	(CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
+    #define CFG_ENV_SIZE	0x2000 /* CFG_ENV_SECT_SIZE */
+  #endif
+#else
+  #define CFG_NO_FLASH		1	/* Flash is not usable now	*/
+  #define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only	*/
+  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+  #define CFG_ENV_SIZE		0x2000
+#endif
 
-#define CFG_ALT_MEMTEST			/* Select full-featured memory test */
-#define CFG_MEMTEST_START	0x2000	/* memtest works from the end of */
-					/* the exception vector table */
-					/* to the end of the DRAM  */
-					/* less monitor and malloc area */
-#define CFG_STACK_USAGE		0x10000 /* Reserve 64k for the stack usage */
-#define CFG_MEM_END_USAGE	( CFG_MONITOR_LEN \
-				+ CFG_MALLOC_LEN \
-				+ CFG_ENV_SECT_SIZE \
-				+ CFG_STACK_USAGE )
+#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=192.168.0.251:/tftpboot ip=192.168.0.105:192.168.0.251::255.255.255.0:sbc8560:eth0:off console=ttyS0,9600"
+/*#define CONFIG_BOOTARGS      "root=/dev/ram rw console=ttyS0,115200"*/
+#define CONFIG_BOOTCOMMAND	"bootm 0xff800000 0xffa00000"
+#define CONFIG_BOOTDELAY	5	/* -1 disable autoboot */
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+
+#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
+  #if defined(CONFIG_PCI)
+    #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_PCI | \
+				CFG_CMD_PING | CFG_CMD_I2C) & \
+				 ~(CFG_CMD_ENV | \
+				  CFG_CMD_LOADS ))
+  #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC))
+    #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_MII | \
+				CFG_CMD_PING | CFG_CMD_I2C) & \
+				~(CFG_CMD_ENV))
+  #endif
+#else
+  #if defined(CONFIG_PCI)
+    #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_PCI | \
+				CFG_CMD_PING | CFG_CMD_I2C)
+  #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC))
+    #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_MII | \
+				CFG_CMD_PING | CFG_CMD_I2C)
+  #endif
+#endif
 
-#define CFG_MEMTEST_END		( CFG_SDRAM_SIZE * 1024 * 1024 \
-				- CFG_MEM_END_USAGE )
+#include <cmd_confdefs.h>
 
-/* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 /*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-#define CFG_FLASH_BASE	CFG_FLASH0_BASE
-#define CFG_FLASH_SIZE	CFG_FLASH0_SIZE
-#define CFG_SDRAM_BASE	CFG_SDRAM0_BASE
-#define CFG_SDRAM_SIZE	CFG_SDRAM0_SIZE
-
-/*-----------------------------------------------------------------------
- * Hard Reset Configuration Words
+ * Miscellaneous configurable options
  */
-#if defined(CFG_SBC_BOOT_LOW)
-#  define  CFG_SBC_HRCW_BOOT_FLAGS  (HRCW_CIP | HRCW_BMS)
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	"SBC8560=> " /* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+  #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#  define  CFG_SBC_HRCW_BOOT_FLAGS  (0)
-#endif /* defined(CFG_SBC_BOOT_LOW) */
-
-/* get the HRCW ISB field from CFG_IMMR */
-#define CFG_SBC_HRCW_IMMR	( ((CFG_IMMR & 0x10000000) >> 10) | \
-				  ((CFG_IMMR & 0x01000000) >>  7) | \
-				  ((CFG_IMMR & 0x00100000) >>  4) )
-
-#define CFG_HRCW_MASTER		( HRCW_BPS11				| \
-				  HRCW_DPPC11				| \
-				  CFG_SBC_HRCW_IMMR			| \
-				  HRCW_MMR00				| \
-				  HRCW_LBPC11				| \
-				  HRCW_APPC10				| \
-				  HRCW_CS10PC00				| \
-				  (CFG_SBC_MODCK_H & HRCW_MODCK_H1111)	| \
-				  CFG_SBC_HRCW_BOOT_FLAGS )
-
-/* no slaves */
-#define CFG_HRCW_SLAVE1		0
-#define CFG_HRCW_SLAVE2		0
-#define CFG_HRCW_SLAVE3		0
-#define CFG_HRCW_SLAVE4		0
-#define CFG_HRCW_SLAVE5		0
-#define CFG_HRCW_SLAVE6		0
-#define CFG_HRCW_SLAVE7		0
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	128	/* bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
- * Note also that the logic that sets CFG_RAMBOOT is platform dependent.
- */
-#define CFG_MONITOR_BASE	CFG_FLASH0_BASE
-
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#  define CFG_RAMBOOT
+  #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CFG_LOAD_ADDR	0x1000000	/* default load address */
+#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	16	/* max number of sectors on one chip	*/
-
-#define CFG_FLASH_ERASE_TOUT	8000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	1	/* Timeout for Flash Write (in ms)	*/
-
-#ifndef CFG_RAMBOOT
-#  define CFG_ENV_IS_IN_FLASH	1
-
-#  ifdef CFG_ENV_IN_OWN_SECT
-#    define CFG_ENV_ADDR	(CFG_MONITOR_BASE + 0x40000)
-#    define CFG_ENV_SECT_SIZE	0x40000
-#  else
-#    define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN - CFG_ENV_SECT_SIZE)
-#    define CFG_ENV_SIZE	0x1000	/* Total Size of Environment Sector	*/
-#    define CFG_ENV_SECT_SIZE	0x10000 /* see README - env sect real size	*/
-#  endif /* CFG_ENV_IN_OWN_SECT */
-
-#else
-#  define CFG_ENV_IS_IN_NVRAM	1
-#  define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-#  define CFG_ENV_SIZE		0x200
-#endif /* CFG_RAMBOOT */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU */
+#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE		32768
+#define CFG_CACHELINE_SIZE	32
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+  #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
-/*-----------------------------------------------------------------------
- * HIDx - Hardware Implementation-dependent Registers			 2-11
- *-----------------------------------------------------------------------
- * HID0 also contains cache control - initially enable both caches and
- * invalidate contents, then the final state leaves only the instruction
- * cache enabled. Note that Power-On and Hard reset invalidate the caches,
- * but Soft reset does not.
- *
- * HID1 has only read-only information - nothing to set.
- */
-#define CFG_HID0_INIT	(HID0_ICE  |\
-			 HID0_DCE  |\
-			 HID0_ICFI |\
-			 HID0_DCI  |\
-			 HID0_IFEM |\
-			 HID0_ABE)
-
-#define CFG_HID0_FINAL	(HID0_ICE  |\
-			 HID0_IFEM |\
-			 HID0_ABE  |\
-			 HID0_EMCP)
-#define CFG_HID2	0
-
-/*-----------------------------------------------------------------------
- * RMR - Reset Mode Register
- *-----------------------------------------------------------------------
- */
-#define CFG_RMR		0
-
-/*-----------------------------------------------------------------------
- * BCR - Bus Configuration					 4-25
- *-----------------------------------------------------------------------
- */
-#define CFG_BCR		(BCR_ETM)
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration				 4-31
- *-----------------------------------------------------------------------
- */
-
-#define CFG_SIUMCR	(SIUMCR_DPPC11	|\
-			 SIUMCR_L2CPC00 |\
-			 SIUMCR_APPC10	|\
-			 SIUMCR_MMR00)
-
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control				11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
- */
-#if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC |\
-			 SYPCR_BMT  |\
-			 SYPCR_PBME |\
-			 SYPCR_LBME |\
-			 SYPCR_SWRI |\
-			 SYPCR_SWP  |\
-			 SYPCR_SWE)
-#else
-#define CFG_SYPCR	(SYPCR_SWTC |\
-			 SYPCR_BMT  |\
-			 SYPCR_PBME |\
-			 SYPCR_LBME |\
-			 SYPCR_SWRI |\
-			 SYPCR_SWP)
-#endif	/* CONFIG_WATCHDOG */
-
-/*-----------------------------------------------------------------------
- * TMCNTSC - Time Counter Status and Control			 4-40
- *-----------------------------------------------------------------------
- * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
- * and enable Time Counter
- */
-#define CFG_TMCNTSC	(TMCNTSC_SEC |\
-			 TMCNTSC_ALR |\
-			 TMCNTSC_TCF |\
-			 TMCNTSC_TCE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		 4-42
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
- * Periodic timer
- */
-#define CFG_PISCR	(PISCR_PS  |\
-			 PISCR_PTF |\
-			 PISCR_PTE)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock Control					 9-8
- *-----------------------------------------------------------------------
- */
-#define CFG_SCCR	0
-
-/*-----------------------------------------------------------------------
- * RCCR - RISC Controller Configuration				13-7
- *-----------------------------------------------------------------------
- */
-#define CFG_RCCR	0
-
 /*
- * Initialize Memory Controller:
- *
- * Bank Bus	Machine PortSz	Device
- * ---- ---	------- ------	------
- *  0	60x	GPCM	32 bit	FLASH (SIMM - 4MB) *
- *  1	60x	GPCM	32 bit	FLASH (SIMM - Unused)
- *  2	60x	SDRAM	64 bit	SDRAM (DIMM - 16MB or 64MB)
- *  3	60x	SDRAM	64 bit	SDRAM (DIMM - Unused)
- *  4	Local	SDRAM	32 bit	SDRAM (on board - 4MB)
- *  5	60x	GPCM	 8 bit	EEPROM (8KB)
- *  6	60x	GPCM	 8 bit	FLASH  (on board - 2MB) *
- *  7	60x	GPCM	 8 bit	LEDs, switches
- *
- *  (*) This configuration requires the SBC8260 be configured
- *	so that *CS0 goes to the FLASH SIMM, and *CS6 goes to
- *	the on board FLASH. In other words, JP24 should have
- *	pins 1 and 2 jumpered and pins 3 and 4 jumpered.
- *
- */
-
-/*-----------------------------------------------------------------------
- * BR0,BR1 - Base Register
- *     Ref: Section 10.3.1 on page 10-14
- * OR0,OR1 - Option Register
- *     Ref: Section 10.3.2 on page 10-18
- *-----------------------------------------------------------------------
- */
-
-/* Bank 0,1 - FLASH SIMM
- *
- * This expects the FLASH SIMM to be connected to *CS0
- * It consists of 4 AM29F080B parts.
- *
- * Note: For the 4 MB SIMM, *CS1 is unused.
- */
-
-/* BR0 is configured as follows:
- *
- *     - Base address of 0x40000000
- *     - 32 bit port size
- *     - Data errors checking is disabled
- *     - Read and write access
- *     - GPCM 60x bus
- *     - Access are handled by the memory controller according to MSEL
- *     - Not used for atomic operations
- *     - No data pipelining is done
- *     - Valid
- */
-#define CFG_BR0_PRELIM	((CFG_FLASH0_BASE & BRx_BA_MSK) |\
-			 BRx_PS_32			|\
-			 BRx_MS_GPCM_P			|\
-			 BRx_V)
-
-/* OR0 is configured as follows:
- *
- *     - 4 MB
- *     - *BCTL0 is asserted upon access to the current memory bank
- *     - *CW / *WE are negated a quarter of a clock earlier
- *     - *CS is output at the same time as the address lines
- *     - Uses a clock cycle length of 5
- *     - *PSDVAL is generated internally by the memory controller
- *	 unless *GTA is asserted earlier externally.
- *     - Relaxed timing is generated by the GPCM for accesses
- *	 initiated to this memory region.
- *     - One idle clock is inserted between a read access from the
- *	 current bank and the next access.
- */
-#define CFG_OR0_PRELIM	(MEG_TO_AM(CFG_FLASH0_SIZE)	|\
-			 ORxG_CSNT			|\
-			 ORxG_ACS_DIV1			|\
-			 ORxG_SCY_5_CLK			|\
-			 ORxG_TRLX			|\
-			 ORxG_EHTR)
-
-/*-----------------------------------------------------------------------
- * BR2,BR3 - Base Register
- *     Ref: Section 10.3.1 on page 10-14
- * OR2,OR3 - Option Register
- *     Ref: Section 10.3.2 on page 10-16
- *-----------------------------------------------------------------------
- */
-
-/* Bank 2,3 - SDRAM DIMM
- *
- *     16MB DIMM: P/N
- *     64MB DIMM: P/N  1W-8864X8-4-P1-EST
- *
- * Note: *CS3 is unused for this DIMM
- */
-
-/* With a 16 MB or 64 MB DIMM, the BR2 is configured as follows:
- *
- *     - Base address of 0x00000000
- *     - 64 bit port size (60x bus only)
- *     - Data errors checking is disabled
- *     - Read and write access
- *     - SDRAM 60x bus
- *     - Access are handled by the memory controller according to MSEL
- *     - Not used for atomic operations
- *     - No data pipelining is done
- *     - Valid
- */
-#define CFG_BR2_PRELIM	((CFG_SDRAM0_BASE & BRx_BA_MSK) |\
-			 BRx_PS_64			|\
-			 BRx_MS_SDRAM_P			|\
-			 BRx_V)
-
-#define CFG_BR3_PRELIM	((CFG_SDRAM0_BASE & BRx_BA_MSK) |\
-			 BRx_PS_64			|\
-			 BRx_MS_SDRAM_P			|\
-			 BRx_V)
-
-/* With a 16 MB DIMM, the OR2 is configured as follows:
- *
- *     - 16 MB
- *     - 2 internal banks per device
- *     - Row start address bit is A9 with PSDMR[PBI] = 0
- *     - 11 row address lines
- *     - Back-to-back page mode
- *     - Internal bank interleaving within save device enabled
- */
-#if (CFG_SDRAM0_SIZE == 16)
-#define CFG_OR2_PRELIM	(MEG_TO_AM(CFG_SDRAM0_SIZE)	|\
-			 ORxS_BPD_2			|\
-			 ORxS_ROWST_PBI0_A9		|\
-			 ORxS_NUMR_11)
-#endif
-
-/* With a 64 MB DIMM, the OR2 is configured as follows:
- *
- *     - 64 MB
- *     - 4 internal banks per device
- *     - Row start address bit is A8 with PSDMR[PBI] = 0
- *     - 12 row address lines
- *     - Back-to-back page mode
- *     - Internal bank interleaving within save device enabled
- */
-#if (CFG_SDRAM0_SIZE == 64)
-#define CFG_OR2_PRELIM	(MEG_TO_AM(CFG_SDRAM0_SIZE)	|\
-			 ORxS_BPD_4			|\
-			 ORxS_ROWST_PBI0_A8		|\
-			 ORxS_NUMR_12)
-#endif
-
-/*-----------------------------------------------------------------------
- * PSDMR - 60x Bus SDRAM Mode Register
- *     Ref: Section 10.3.3 on page 10-21
- *-----------------------------------------------------------------------
- */
-
-/* Address that the DIMM SPD memory lives at.
- */
-#define SDRAM_SPD_ADDR 0x54
-
-#if (CFG_SDRAM0_SIZE == 16)
-/* With a 16 MB DIMM, the PSDMR is configured as follows:
+ * Internal Definitions
  *
- *     - Bank Based Interleaving,
- *     - Refresh Enable,
- *     - Address Multiplexing where A5 is output on A14 pin
- *	 (A6 on A15, and so on),
- *     - use address pins A16-A18 as bank select,
- *     - A9 is output on SDA10 during an ACTIVATE command,
- *     - earliest timing for ACTIVATE command after REFRESH command is 7 clocks,
- *     - earliest timing for ACTIVATE or REFRESH command after PRECHARGE command
- *	 is 3 clocks,
- *     - earliest timing for READ/WRITE command after ACTIVATE command is
- *	 2 clocks,
- *     - earliest timing for PRECHARGE after last data was read is 1 clock,
- *     - earliest timing for PRECHARGE after last data was written is 1 clock,
- *     - CAS Latency is 2.
+ * Boot Flags
  */
-#define CFG_PSDMR	(PSDMR_RFEN	      |\
-			 PSDMR_SDAM_A14_IS_A5 |\
-			 PSDMR_BSMA_A16_A18   |\
-			 PSDMR_SDA10_PBI0_A9  |\
-			 PSDMR_RFRC_7_CLK     |\
-			 PSDMR_PRETOACT_3W    |\
-			 PSDMR_ACTTORW_2W     |\
-			 PSDMR_LDOTOPRE_1C    |\
-			 PSDMR_WRC_1C	      |\
-			 PSDMR_CL_2)
-#endif
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
 
-#if (CFG_SDRAM0_SIZE == 64)
-/* With a 64 MB DIMM, the PSDMR is configured as follows:
- *
- *     - Bank Based Interleaving,
- *     - Refresh Enable,
- *     - Address Multiplexing where A5 is output on A14 pin
- *	 (A6 on A15, and so on),
- *     - use address pins A14-A16 as bank select,
- *     - A9 is output on SDA10 during an ACTIVATE command,
- *     - earliest timing for ACTIVATE command after REFRESH command is 7 clocks,
- *     - earliest timing for ACTIVATE or REFRESH command after PRECHARGE command
- *	 is 3 clocks,
- *     - earliest timing for READ/WRITE command after ACTIVATE command is
- *	 2 clocks,
- *     - earliest timing for PRECHARGE after last data was read is 1 clock,
- *     - earliest timing for PRECHARGE after last data was written is 1 clock,
- *     - CAS Latency is 2.
- */
-#define CFG_PSDMR	(PSDMR_RFEN	      |\
-			 PSDMR_SDAM_A14_IS_A5 |\
-			 PSDMR_BSMA_A14_A16   |\
-			 PSDMR_SDA10_PBI0_A9  |\
-			 PSDMR_RFRC_7_CLK     |\
-			 PSDMR_PRETOACT_3W    |\
-			 PSDMR_ACTTORW_2W     |\
-			 PSDMR_LDOTOPRE_1C    |\
-			 PSDMR_WRC_1C	      |\
-			 PSDMR_CL_2)
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+  #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+  #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
-/*
- * Shoot for approximately 1MHz on the prescaler.
- */
-#if (CONFIG_8260_CLKIN == (66 * 1000 * 1000))
-#define CFG_MPTPR	MPTPR_PTP_DIV64
-#elif (CONFIG_8260_CLKIN == (33 * 1000 * 1000))
-#define CFG_MPTPR	MPTPR_PTP_DIV32
-#else
-#warning "Unconfigured bus clock freq: check CFG_MPTPR and CFG_PSRT are OK"
-#define CFG_MPTPR	MPTPR_PTP_DIV32
+/*Note: change below for your network setting!!! */
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
+  #define CONFIG_ETHADDR	00:01:af:07:9b:8a
+  #define CONFIG_ETH1ADDR	00:01:af:07:9b:8b
+  #define CONFIG_ETH2ADDR	00:01:af:07:9b:8c
 #endif
-#define CFG_PSRT	14
-
-
-/* Bank 4 - On board SDRAM
- *
- * This is not implemented yet.
- */
-
-/*-----------------------------------------------------------------------
- * BR6 - Base Register
- *     Ref: Section 10.3.1 on page 10-14
- * OR6 - Option Register
- *     Ref: Section 10.3.2 on page 10-18
- *-----------------------------------------------------------------------
- */
-
-/* Bank 6 - On board FLASH
- *
- * This expects the on board FLASH SIMM to be connected to *CS6
- * It consists of 1 AM29F016A part.
- */
-#if (defined(CFG_FLASH1_BASE) && defined(CFG_FLASH1_SIZE))
 
-/* BR6 is configured as follows:
- *
- *     - Base address of 0x60000000
- *     - 8 bit port size
- *     - Data errors checking is disabled
- *     - Read and write access
- *     - GPCM 60x bus
- *     - Access are handled by the memory controller according to MSEL
- *     - Not used for atomic operations
- *     - No data pipelining is done
- *     - Valid
- */
-#  define CFG_BR6_PRELIM  ((CFG_FLASH1_BASE & BRx_BA_MSK) |\
-			   BRx_PS_8			  |\
-			   BRx_MS_GPCM_P		  |\
-			   BRx_V)
-
-/* OR6 is configured as follows:
- *
- *     - 2 MB
- *     - *BCTL0 is asserted upon access to the current memory bank
- *     - *CW / *WE are negated a quarter of a clock earlier
- *     - *CS is output at the same time as the address lines
- *     - Uses a clock cycle length of 5
- *     - *PSDVAL is generated internally by the memory controller
- *	 unless *GTA is asserted earlier externally.
- *     - Relaxed timing is generated by the GPCM for accesses
- *	 initiated to this memory region.
- *     - One idle clock is inserted between a read access from the
- *	 current bank and the next access.
- */
-#  define CFG_OR6_PRELIM  (MEG_TO_AM(CFG_FLASH1_SIZE)  |\
-			   ORxG_CSNT		       |\
-			   ORxG_ACS_DIV1	       |\
-			   ORxG_SCY_5_CLK	       |\
-			   ORxG_TRLX		       |\
-			   ORxG_EHTR)
-#endif /* (defined(CFG_FLASH1_BASE) && defined(CFG_FLASH1_SIZE)) */
-
-/*-----------------------------------------------------------------------
- * BR7 - Base Register
- *     Ref: Section 10.3.1 on page 10-14
- * OR7 - Option Register
- *     Ref: Section 10.3.2 on page 10-18
- *-----------------------------------------------------------------------
- */
-
-/* Bank 7 - LEDs and switches
- *
- *  LEDs     are at 0x00001 (write only)
- *  switches are at 0x00001 (read only)
- */
-#ifdef CFG_LED_BASE
-
-/* BR7 is configured as follows:
- *
- *     - Base address of 0xA0000000
- *     - 8 bit port size
- *     - Data errors checking is disabled
- *     - Read and write access
- *     - GPCM 60x bus
- *     - Access are handled by the memory controller according to MSEL
- *     - Not used for atomic operations
- *     - No data pipelining is done
- *     - Valid
- */
-#  define CFG_BR7_PRELIM  ((CFG_LED_BASE & BRx_BA_MSK)	 |\
-			   BRx_PS_8			 |\
-			   BRx_MS_GPCM_P		 |\
-			   BRx_V)
-
-/* OR7 is configured as follows:
- *
- *     - 1 byte
- *     - *BCTL0 is asserted upon access to the current memory bank
- *     - *CW / *WE are negated a quarter of a clock earlier
- *     - *CS is output at the same time as the address lines
- *     - Uses a clock cycle length of 15
- *     - *PSDVAL is generated internally by the memory controller
- *	 unless *GTA is asserted earlier externally.
- *     - Relaxed timing is generated by the GPCM for accesses
- *	 initiated to this memory region.
- *     - One idle clock is inserted between a read access from the
- *	 current bank and the next access.
- */
-#  define CFG_OR7_PRELIM  (ORxG_AM_MSK		       |\
-			   ORxG_CSNT		       |\
-			   ORxG_ACS_DIV1	       |\
-			   ORxG_SCY_15_CLK	       |\
-			   ORxG_TRLX		       |\
-			   ORxG_EHTR)
-#endif /* CFG_LED_BASE */
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM	0x02	/* Software reboot		     */
+#define CONFIG_SERVERIP		192.168.0.131
+#define CONFIG_IPADDR		192.168.0.105
+#define CONFIG_GATEWAYIP	0.0.0.0
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_HOSTNAME		SBC8560
+#define CONFIG_ROOTPATH		/home/ppc
+#define CONFIG_BOOTFILE		pImage
 
 #endif	/* __CONFIG_H */
diff --git a/include/status_led.h b/include/status_led.h
index dc4b898..76a0dfd 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -336,6 +336,9 @@ void status_led_set  (int led, int state);
 /*****  NetPhone   ********************************************************/
 #elif defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2)
 /* XXX empty just to avoid the error */
+/*****  sbc8240   ********************************************************/
+#elif defined(CONFIG_WRSBC8240)
+/* XXX empty just to avoid the error */
 /************************************************************************/
 #else
 # error Status LED configuration missing