mpc82xx: Remove BMW board port

As the board seems to be unmaintained for some time, lets remove
the support in mainline completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: James F. Dougherty <jfd@broadcom.com>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Marek Vasut <marex@denx.de>

1 files changed, 0 insertions, 302 deletions

diff --git a/include/configs/BMW.h b/include/configs/BMW.h
deleted file mode 100644
index 633e9bd..0000000
--- a/include/configs/BMW.h
+++ /dev/null
@@ -1,302 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- *
- * Configuration settings for the CU824 board.
- *
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC824X		1
-#define CONFIG_MPC8245		1
-#define CONFIG_BMW		1
-
-#define	CONFIG_SYS_TEXT_BASE	0xFFF00000
-
-#define	CONFIG_MISC_INIT_F	1	/* Use misc_init_f()			*/
-
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE		9600
-
-#define CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz	*/
-
-#define CONFIG_BOOTCOMMAND	"bootm FF820000"	/* autoboot command	*/
-#define CONFIG_BOOTDELAY	5
-
-#define CONFIG_SYS_MAX_DOC_DEVICE      1 /* Only use Onboard TSOP-16MB device */
-#define DOC_PASSIVE_PROBE       1
-#define CONFIG_SYS_DOC_SUPPORT_2000    1
-#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM 1
-#define CONFIG_SYS_DOC_SHORT_TIMEOUT    1
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_ELF
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-
-
-#if 0
-#define CONFIG_PCI		1
-#define CONFIG_PCI_PNP		1	/* PCI plug-and-play */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT	"=>"	        /* Monitor Command Prompt	*/
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-
-/* Print Buffer Size
- */
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-#define CONFIG_SYS_MAXARGS	8		/* Max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CONFIG_SYS_LOAD_ADDR	0x00100000	/* Default load address		*/
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE	    0x00000000
-
-#define CONFIG_SYS_FLASH_BASE0_PRELIM      0xFFF00000      /* FLASH bank on RCS#0 */
-#define CONFIG_SYS_FLASH_BASE1_PRELIM      0xFF800000      /* FLASH bank on RCS#1 */
-#define CONFIG_SYS_FLASH_BASE  CONFIG_SYS_MONITOR_BASE
-#define CONFIG_SYS_FLASH_BANKS		{ CONFIG_SYS_FLASH_BASE0_PRELIM , CONFIG_SYS_FLASH_BASE1_PRELIM }
-
-/* even though FLASHP_BASE is FF800000, with 4MB is RCS0, the
- * reset vector is actually located at FFB00100, but the 8245
- * takes care of us.
- */
-#define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
-
-#define CONFIG_SYS_EUMB_ADDR	    0xFC000000
-
-#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
-#define CONFIG_SYS_MALLOC_LEN	    (2048 << 10) /* Reserve 2MB for malloc()	*/
-
-#define CONFIG_SYS_MEMTEST_START   0x00004000	/* memtest works on		*/
-#define CONFIG_SYS_MEMTEST_END	    0x04000000	/* 0 ... 32 MB in DRAM		*/
-
-	/* Maximum amount of RAM.
-	 */
-#define CONFIG_SYS_MAX_RAM_SIZE    0x04000000	/* 0 .. 64 MB of (S)DRAM */
-
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-#undef CONFIG_SYS_RAMBOOT
-#else
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MONITOR_LEN
-#define CONFIG_SYS_INIT_RAM_SIZE   0x2F00  /* Size of used area in DPRAM  */
-#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET  CONFIG_SYS_GBL_DATA_OFFSET
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- * For the detail description refer to the MPC8240 user's manual.
- */
-
-#define CONFIG_SYS_CLK_FREQ  33000000	/* external frequency to pll */
-#define CONFIG_SYS_HZ		     1000
-
-#define CONFIG_SYS_ETH_DEV_FN	     0x7800
-#define CONFIG_SYS_ETH_IOBASE	     0x00104000
-
-	/* Bit-field values for MCCR1.
-	 */
-#define CONFIG_SYS_ROMNAL	    0xf
-#define CONFIG_SYS_ROMFAL	    0x1f
-#define CONFIG_SYS_DBUS_SIZE       0x3
-
-	/* Bit-field values for MCCR2.
-	 */
-#define CONFIG_SYS_TSWAIT	    0x5		    /* Transaction Start Wait States timer */
-#define CONFIG_SYS_REFINT	    0x400	    /* Refresh interval	FIXME: was 0t430		*/
-
-	/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
-	 */
-#define CONFIG_SYS_BSTOPRE	    0		/* FIXME: was 192 */
-
-	/* Bit-field values for MCCR3.
-	 */
-#define CONFIG_SYS_REFREC	    2	    /* Refresh to activate interval */
-
-	/* Bit-field values for MCCR4.
-	 */
-#define CONFIG_SYS_PRETOACT	    2	    /* Precharge to activate interval FIXME: was 2	*/
-#define CONFIG_SYS_ACTTOPRE	    5	    /* Activate to Precharge interval FIXME: was 5	*/
-#define CONFIG_SYS_SDMODE_CAS_LAT  3	    /* SDMODE CAS latancy */
-#define CONFIG_SYS_SDMODE_WRAP	    0	    /* SDMODE wrap type	*/
-#define CONFIG_SYS_SDMODE_BURSTLEN 3	    /* SDMODE Burst length */
-#define CONFIG_SYS_ACTORW	    0xa		/* FIXME was 2 */
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
-
-#define CONFIG_SYS_PGMAX           0x0 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/
-
-#define CONFIG_SYS_SDRAM_DSCD	0x20	/* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */
-
-/* Memory bank settings.
- * Only bits 20-29 are actually used from these vales to set the
- * start/end addresses. The upper two bits will always be 0, and the lower
- * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
- * address. Refer to the MPC8240 book.
- */
-
-#define CONFIG_SYS_BANK0_START	    0x00000000
-#define CONFIG_SYS_BANK0_END	    (CONFIG_SYS_MAX_RAM_SIZE - 1)
-#define CONFIG_SYS_BANK0_ENABLE    1
-#define CONFIG_SYS_BANK1_START	    0x3ff00000
-#define CONFIG_SYS_BANK1_END	    0x3fffffff
-#define CONFIG_SYS_BANK1_ENABLE    0
-#define CONFIG_SYS_BANK2_START	    0x3ff00000
-#define CONFIG_SYS_BANK2_END	    0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE    0
-#define CONFIG_SYS_BANK3_START	    0x3ff00000
-#define CONFIG_SYS_BANK3_END	    0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE    0
-#define CONFIG_SYS_BANK4_START	    0x3ff00000
-#define CONFIG_SYS_BANK4_END	    0x3fffffff
-#define CONFIG_SYS_BANK4_ENABLE    0
-#define CONFIG_SYS_BANK5_START	    0x3ff00000
-#define CONFIG_SYS_BANK5_END	    0x3fffffff
-#define CONFIG_SYS_BANK5_ENABLE    0
-#define CONFIG_SYS_BANK6_START	    0x3ff00000
-#define CONFIG_SYS_BANK6_END	    0x3fffffff
-#define CONFIG_SYS_BANK6_ENABLE    0
-#define CONFIG_SYS_BANK7_START	    0x3ff00000
-#define CONFIG_SYS_BANK7_END	    0x3fffffff
-#define CONFIG_SYS_BANK7_ENABLE    0
-
-#define CONFIG_SYS_ODCR	    0xff
-
-#define CONFIG_PCI              1 /* Include PCI support */
-#undef CONFIG_PCI_PNP
-
-/* PCI Memory space(s) */
-#define PCI_MEM_SPACE1_START	0x80000000
-#define PCI_MEM_SPACE2_START	0xfd000000
-
-/* ROM Spaces */
-#include "../board/bmw/bmw.h"
-
-/* BAT configuration */
-#define CONFIG_SYS_IBAT0L  (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U  (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT1L  (0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT1U  (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L  CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U  CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L  CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U  CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L  CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U  CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
-
-/*
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	0	/* Max number of flash banks	    */
-#define CONFIG_SYS_MAX_FLASH_SECT	64	/* Max number of sectors per  flash */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
-
-/*
- * Warining: environment is not EMBEDDED in the U-Boot code.
- * It's stored in flash separately.
- */
-#define CONFIG_ENV_IS_IN_NVRAM      1
-#define CONFIG_ENV_OVERWRITE     1
-#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE 1
-#define CONFIG_ENV_ADDR		0x7c004000 /* right at the start of NVRAM  */
-#define CONFIG_ENV_SIZE		0x1ff0	/* Size of the Environment - 8K	   */
-#define CONFIG_ENV_OFFSET		0	/* starting right at the beginning */
-
-/*
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value   */
-#endif
-
-#endif	/* __CONFIG_H */