Merge branch 'master' of git://git.denx.de/u-boot-arm

25 files changed, 346 insertions, 58 deletions

diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index a5736b7..2020e7f 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -398,7 +398,6 @@
 /* Network. */
 #define CONFIG_PHY_GIGE
 #define CONFIG_PHYLIB
-#define CONFIG_PHY_ADDR			0
 #define CONFIG_PHY_SMSC
 
 /* NAND support */
diff --git a/include/configs/am335x_igep0033.h b/include/configs/am335x_igep0033.h
index c00d54f..c17327f 100644
--- a/include/configs/am335x_igep0033.h
+++ b/include/configs/am335x_igep0033.h
@@ -181,7 +181,6 @@
 #define CONFIG_NET_RETRY_COUNT         10
 #define CONFIG_NET_MULTI
 #define CONFIG_PHYLIB
-#define CONFIG_PHY_ADDR			0
 #define CONFIG_PHY_SMSC
 
 /* NAND support */
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index c773a18..614857d 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -205,4 +205,30 @@
 	"run usbboot;"
 
 #endif
+
+/* CPSW Ethernet */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_MII
+#define CONFIG_DRIVER_TI_CPSW
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_NET_RETRY_COUNT		10
+#define CONFIG_NET_MULTI
+#define CONFIG_PHY_GIGE
+#define CONFIG_PHYLIB
+
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_NET_VCI_STRING	"AM43xx U-Boot SPL"
+
+#define CONFIG_SPL_ETH_SUPPORT
+#define CONFIG_SPL_NET_SUPPORT
+#define CONFIG_SYS_RX_ETH_BUFFER	64
+
 #endif	/* __CONFIG_AM43XX_EVM_H */
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index b9aa036..48c12ea 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -103,6 +103,7 @@
 #define CONFIG_CMD_PING		1
 #define CONFIG_CMD_DHCP		1
 #define CONFIG_CMD_NAND		1
+#define CONFIG_CMD_MMC
 #define CONFIG_CMD_USB		1
 
 /* SDRAM */
@@ -123,6 +124,18 @@
 #define DATAFLASH_TCSS			(0x1a << 16)
 #define DATAFLASH_TCHS			(0x1 << 24)
 
+/* MMC */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#endif
+
+/* FAT */
+#ifdef CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
 /* NOR flash, if populated */
 #ifdef CONFIG_SYS_USE_NORFLASH
 #define CONFIG_SYS_FLASH_CFI			1
diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
index 1f57bd2..7bbe596 100644
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -51,7 +51,6 @@
 #define CONFIG_MII			/* Required in net/eth.c */
 #define CONFIG_SPL_ETH_SUPPORT
 #define CONFIG_PHYLIB
-#define CONFIG_PHY_ADDR			1
 #define CONFIG_PHY_NATSEMI
 #define CONFIG_SPL_NET_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT		/* used for a fetching MAC-Address */
diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h
index 56e9a8e..26b615b 100644
--- a/include/configs/cm_t335.h
+++ b/include/configs/cm_t335.h
@@ -114,7 +114,6 @@
 /* Network. */
 #define CONFIG_PHY_GIGE
 #define CONFIG_PHYLIB
-#define CONFIG_PHY_ADDR			0
 #define CONFIG_PHY_ATHEROS
 
 /* NAND support */
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index c67cf60..291c538 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -62,7 +62,6 @@
 #define CONFIG_MII			/* Required in net/eth.c */
 #define CONFIG_PHY_GIGE			/* per-board part of CPSW */
 #define CONFIG_PHYLIB
-#define CONFIG_PHY_ADDR			2
 
 /* SPI */
 #undef	CONFIG_OMAP3_SPI
diff --git a/include/configs/dxr2.h b/include/configs/dxr2.h
index 1e42f5c..75f7812 100644
--- a/include/configs/dxr2.h
+++ b/include/configs/dxr2.h
@@ -26,6 +26,7 @@
 
 #define BOARD_DFU_BUTTON_GPIO	27
 #define BOARD_DFU_BUTTON_LED	64
+#define GPIO_LAN9303_NRST	88	/* GPIO2_24 = gpio88 */
 
 #undef CONFIG_DOS_PARTITION
 #undef CONFIG_CMD_FAT
@@ -49,7 +50,6 @@
 
 #undef CONFIG_MII
 #undef CONFIG_PHY_GIGE
-#define CONFIG_PHY_ADDR			0
 #define CONFIG_PHY_SMSC
 
 #define CONFIG_FACTORYSET
diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index 12d8141..d56d5b0 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -37,6 +37,11 @@
 #define CONFIG_SHOW_BOOT_PROGRESS
 #endif
 
+/* GPIO banks */
+#define CONFIG_OMAP3_GPIO_3		/* GPIO64 .. 95 is in GPIO bank 3 */
+#define CONFIG_OMAP3_GPIO_5		/* GPIO128..159 is in GPIO bank 5 */
+#define CONFIG_OMAP3_GPIO_6		/* GPIO160..191 is in GPIO bank 6 */
+
 /* USB */
 #define CONFIG_MUSB_UDC			1
 #define CONFIG_USB_OMAP3		1
diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h
index 6f41ee7..9af3efd 100644
--- a/include/configs/pcm051.h
+++ b/include/configs/pcm051.h
@@ -297,7 +297,6 @@
 #define CONFIG_NET_MULTI
 #define CONFIG_PHY_GIGE
 #define CONFIG_PHYLIB
-#define CONFIG_PHY_ADDR			0
 #define CONFIG_PHY_SMSC
 
 #endif	/* ! __CONFIG_PCM051_H */
diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h
index 5a55556..fc25966 100644
--- a/include/configs/pengwyn.h
+++ b/include/configs/pengwyn.h
@@ -196,7 +196,6 @@
 /* Network */
 #define CONFIG_CMD_MII
 #define CONFIG_PHYLIB
-#define CONFIG_PHY_ADDR		1
 #define CONFIG_PHY_RESET	1
 #define CONFIG_PHY_NATSEMI
 
diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h
index 7722f7b..6276d43 100644
--- a/include/configs/pxm2.h
+++ b/include/configs/pxm2.h
@@ -44,7 +44,6 @@
 #undef CONFIG_SPL_NET_VCI_STRING
 #undef CONFIG_SPL_ETH_SUPPORT
 
-#define CONFIG_PHY_ADDR			0
 #define CONFIG_PHY_ATHEROS
 
 #define CONFIG_FACTORYSET
diff --git a/include/configs/rut.h b/include/configs/rut.h
index d4519f9..6bddede 100644
--- a/include/configs/rut.h
+++ b/include/configs/rut.h
@@ -41,7 +41,6 @@
 #undef CONFIG_SPL_NET_VCI_STRING
 #undef CONFIG_SPL_ETH_SUPPORT
 
-#define CONFIG_PHY_ADDR			1
 #define CONFIG_PHY_NATSEMI
 
 #define CONFIG_FACTORYSET
diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
new file mode 100644
index 0000000..91cc7d8
--- /dev/null
+++ b/include/configs/sama5d3_xplained.h
@@ -0,0 +1,203 @@
+/*
+ * Configuration settings for the SAMA5D3 Xplained board.
+ *
+ * Copyright (C) 2014 Atmel Corporation
+ *		      Bo Shen <voice.shen@atmel.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/hardware.h>
+
+#define CONFIG_SYS_TEXT_BASE		0x26f00000
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_SLOW_CLOCK      32768
+#define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
+#define CONFIG_SYS_HZ		        1000
+
+#define CONFIG_AT91FAMILY
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_OF_LIBFDT		/* Device Tree support */
+
+/* general purpose I/O */
+#define CONFIG_AT91_GPIO
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
+#define CONFIG_USART_ID			ATMEL_ID_DBGU
+
+/*
+ * This needs to be defined for the OHCI code to work but it is defined as
+ * ATMEL_ID_UHPHS in the CPU specific header files.
+ */
+#define ATMEL_ID_UHP			ATMEL_ID_UHPHS
+
+/*
+ * Specify the clock enable bit in the PMC_SCER register.
+ */
+#define ATMEL_PMC_UHP			AT91SAM926x_PMC_UHP
+
+#define CONFIG_BOOTDELAY		3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/* No NOR flash */
+#define CONFIG_SYS_NO_FLASH
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_LOADS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
+#define CONFIG_SYS_SDRAM_SIZE		0x10000000
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+
+/* NAND flash */
+#define CONFIG_CMD_NAND
+
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		ATMEL_BASE_CS3
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+/* PMECC & PMERRLOC */
+#define CONFIG_ATMEL_NAND_HWECC
+#define CONFIG_ATMEL_NAND_HW_PMECC
+#define CONFIG_PMECC_CAP		4
+#define CONFIG_PMECC_SECTOR_SIZE	512
+#define CONFIG_CMD_NAND_TRIMFFS
+#define CONFIG_CMD_MTDPARTS
+
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#endif
+
+/* Ethernet Hardware */
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_NET_MULTI
+#define CONFIG_NET_RETRY_COUNT		20
+#define CONFIG_MACB_SEARCH_PHY
+#define CONFIG_RGMII
+#define CONFIG_CMD_MII
+#define CONFIG_PHYLIB
+
+/* MMC */
+#define CONFIG_CMD_MMC
+
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#define CONFIG_ATMEL_MCI_8BIT
+#endif
+
+/* USB */
+#define CONFIG_CMD_USB
+
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_UPLL
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		ATMEL_BASE_OHCI
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"SAMA5D3 Xplained"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
+#define CONFIG_DOS_PARTITION
+#define CONFIG_USB_STORAGE
+#endif
+
+#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
+#define CONFIG_CMD_FAT
+#define CONFIG_FAT_WRITE
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+#endif
+
+#define CONFIG_SYS_LOAD_ADDR			0x22000000 /* load address */
+
+#if CONFIG_SYS_USE_NANDFLASH
+/* bootstrap + u-boot + env in nandflash */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET		0xc0000
+#define CONFIG_ENV_OFFSET_REDUND	0x100000
+#define CONFIG_ENV_SIZE			0x20000
+#define CONFIG_BOOTCOMMAND	"nand read 0x21000000 0x180000 0x80000;" \
+				"nand read 0x22000000 0x200000 0x600000;" \
+				"bootz 0x22000000 - 0x21000000"
+#elif CONFIG_SYS_USE_MMC
+/* bootstrap + u-boot + env in sd card */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET	0x2000
+#define CONFIG_ENV_SIZE		0x1000
+#define CONFIG_BOOTCOMMAND	"fatload mmc 0:1 0x21000000 at91-sama5d3_xplained.dtb; " \
+				"fatload mmc 0:1 0x22000000 zImage; " \
+				"bootz 0x22000000 - 0x21000000"
+#define CONFIG_SYS_MMC_ENV_DEV	0
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+
+#ifdef CONFIG_SYS_USE_MMC
+#define CONFIG_BOOTARGS							\
+	"console=ttyS0,115200 earlyprintk "				\
+	"root=/dev/mmcblk0p2 rw rootwait"
+#else
+#define CONFIG_BOOTARGS							\
+	"console=ttyS0,115200 earlyprintk "				\
+	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
+	"256K(env),256k(evn_redundent),256k(spare),"			\
+	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
+	"rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
+#endif
+
+#define CONFIG_BAUDRATE			115200
+
+#define CONFIG_SYS_PROMPT		"U-Boot> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
+
+#endif
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index c34feb5..516be85 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -258,6 +258,8 @@
 #define CONFIG_SPL_SERIAL_SUPPORT
 
 #define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SYS_MONITOR_LEN		(512 << 10)
+
 #ifdef CONFIG_SYS_USE_MMC
 #define CONFIG_SPL_LDSCRIPT		arch/arm/cpu/at91-common/u-boot-spl.lds
 #define CONFIG_SPL_MMC_SUPPORT
@@ -267,6 +269,27 @@
 #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_LIBDISK_SUPPORT
+
+#elif CONFIG_SYS_USE_NANDFLASH
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_SIZE	0x800
+#define CONFIG_SYS_NAND_PAGE_COUNT	64
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0x0
+
+#elif CONFIG_SYS_USE_SERIALFLASH
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_BUS		0
+#define CONFIG_SPL_SPI_CS		0
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8400
+
 #endif
 
 #endif
diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h
index e1a3bbc..76dad4e 100644
--- a/include/configs/tegra-common-post.h
+++ b/include/configs/tegra-common-post.h
@@ -66,27 +66,63 @@
 #define BOOT_TARGETS_DHCP ""
 #endif
 
+#if defined(CONFIG_CMD_DHCP) && defined(CONFIG_CMD_PXE)
+#define BOOTCMDS_PXE \
+	"bootcmd_pxe=" \
+		BOOTCMD_INIT_USB \
+		"dhcp; " \
+		"if pxe get; then " \
+			"pxe boot; " \
+		"fi\0"
+#define BOOT_TARGETS_PXE "pxe"
+#else
+#define BOOTCMDS_PXE ""
+#define BOOT_TARGETS_PXE ""
+#endif
+
 #define BOOTCMDS_COMMON \
 	"rootpart=1\0" \
 	\
+	"do_script_boot="                                                 \
+		"load ${devtype} ${devnum}:${rootpart} "                  \
+			"${scriptaddr} ${prefix}${script}; "              \
+		"source ${scriptaddr}\0"                                  \
+	\
 	"script_boot="                                                    \
-		"if load ${devtype} ${devnum}:${rootpart} "               \
-				"${scriptaddr} ${prefix}${script}; then " \
-			"echo ${script} found! Executing ...;"            \
-			"source ${scriptaddr};"                           \
-		"fi;\0"                                                   \
+		"for script in ${boot_scripts}; do "                      \
+			"if test -e ${devtype} ${devnum}:${rootpart} "    \
+					"${prefix}${script}; then "       \
+				"echo Found U-Boot script "               \
+					"${prefix}${script}; "            \
+				"run do_script_boot; "                    \
+				"echo SCRIPT FAILED: continuing...; "     \
+			"fi; "                                            \
+		"done\0"                                                  \
+	\
+	"do_sysboot_boot="                                                \
+		"sysboot ${devtype} ${devnum}:${rootpart} any "           \
+			"${scriptaddr} ${prefix}extlinux.conf\0"          \
+	\
+	"sysboot_boot="                                                   \
+		"if test -e ${devtype} ${devnum}:${rootpart} "            \
+				"${prefix}extlinux.conf; then "           \
+			"echo Found extlinux config "                     \
+				"${prefix}extlinux.conf; "                \
+			"run do_sysboot_boot; "                           \
+			"echo SCRIPT FAILED: continuing...; "             \
+		"fi\0"                                                    \
 	\
 	"scan_boot="                                                      \
 		"echo Scanning ${devtype} ${devnum}...; "                 \
 		"for prefix in ${boot_prefixes}; do "                     \
-			"for script in ${boot_scripts}; do "              \
-				"run script_boot; "                       \
-			"done; "                                          \
-		"done;\0"                                                 \
+			"run sysboot_boot; "                              \
+			"run script_boot; "                               \
+		"done\0"                                                  \
 	\
 	"boot_targets=" \
 		BOOT_TARGETS_MMC " " \
 		BOOT_TARGETS_USB " " \
+		BOOT_TARGETS_PXE " " \
 		BOOT_TARGETS_DHCP " " \
 		"\0" \
 	\
@@ -96,7 +132,8 @@
 	\
 	BOOTCMDS_MMC \
 	BOOTCMDS_USB \
-	BOOTCMDS_DHCP
+	BOOTCMDS_DHCP \
+	BOOTCMDS_PXE
 
 #define CONFIG_BOOTCOMMAND \
 	"set usb_need_init; " \
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
index 9247aef..ae786cf 100644
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@ -29,7 +29,6 @@
 #define CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
-#define CONFIG_OF_LIBFDT		/* enable passing of devicetree */
 
 /* Environment */
 #define CONFIG_ENV_VARS_UBOOT_CONFIG
@@ -69,33 +68,20 @@
 #undef CONFIG_CMD_NET		/* network support */
 
 /* turn on command-line edit/hist/auto */
-#define CONFIG_CMDLINE_EDITING
 #define CONFIG_COMMAND_HISTORY
-#define CONFIG_AUTO_COMPLETE
 
 /* turn on commonly used storage-related commands */
-
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
 #define CONFIG_PARTITION_UUIDS
-#define CONFIG_FS_EXT4
-#define CONFIG_FS_FAT
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
 #define CONFIG_CMD_PART
 
 #define CONFIG_SYS_NO_FLASH
 
 #define CONFIG_CONSOLE_MUX
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_BOOTDELAY	2		/* -1 to disable auto boot */
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
 #define CONFIG_SYS_PROMPT		V_PROMPT
 /*
  * Increasing the size of the IO buffer as default nfsargs size is more
@@ -133,8 +119,6 @@
 #define CONFIG_TEGRA_GPIO
 #define CONFIG_CMD_GPIO
 #define CONFIG_CMD_ENTERRCM
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_SUPPORT_RAW_INITRD
 
 /* Defines for SPL */
 #define CONFIG_SPL
@@ -161,4 +145,8 @@
 #define CONFIG_BOUNCE_BUFFER
 #define CONFIG_CRC32_VERIFY
 
+#ifndef CONFIG_SPL_BUILD
+#include <config_distro_defaults.h>
+#endif
+
 #endif /* _TEGRA_COMMON_H_ */
diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h
index a4e8a5f..555c237 100644
--- a/include/configs/tegra114-common.h
+++ b/include/configs/tegra114-common.h
@@ -26,11 +26,6 @@
  */
 #define V_NS16550_CLK		408000000	/* 408MHz (pllp_out0) */
 
-/*
- * High Level Configuration Options
- */
-#define CONFIG_TEGRA114			/* in a NVidia Tegra114 core */
-
 /* Environment information, boards can override if required */
 #define CONFIG_LOADADDR		0x80408000	/* def. location for kernel */
 
@@ -51,6 +46,9 @@
  * scriptaddr can be pretty much anywhere that doesn't conflict with something
  *   else. Put it above BOOTMAPSZ to eliminate conflicts.
  *
+ * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
+ *   something else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
  * kernel_addr_r must be within the first 128M of RAM in order for the
  *   kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
  *   decompress itself to 0x8000 after the start of RAM, kernel_addr_r
@@ -68,6 +66,7 @@
  */
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"scriptaddr=0x90000000\0" \
+	"pxefile_addr_r=0x90100000\0" \
 	"kernel_addr_r=0x81000000\0" \
 	"fdt_addr_r=0x82000000\0" \
 	"ramdisk_addr_r=0x82100000\0"
@@ -83,5 +82,6 @@
 /* For USB EHCI controller */
 #define CONFIG_EHCI_IS_TDI
 #define CONFIG_USB_EHCI_TXFIFO_THRESH	0x10
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 
 #endif /* _TEGRA114_COMMON_H_ */
diff --git a/include/configs/tegra124-common.h b/include/configs/tegra124-common.h
index 0a4541b..61e5026 100644
--- a/include/configs/tegra124-common.h
+++ b/include/configs/tegra124-common.h
@@ -18,11 +18,6 @@
  */
 #define V_NS16550_CLK		408000000	/* 408MHz (pllp_out0) */
 
-/*
- * High Level Configuration Options
- */
-#define CONFIG_TEGRA124			/* is an NVIDIA Tegra124 core */
-
 /* Environment information, boards can override if required */
 #define CONFIG_LOADADDR		0x80408000	/* def. location for kernel */
 
@@ -79,5 +74,6 @@
 /* For USB EHCI controller */
 #define CONFIG_EHCI_IS_TDI
 #define CONFIG_USB_EHCI_TXFIFO_THRESH	0x10
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 
 #endif /* _TEGRA124_COMMON_H_ */
diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h
index b009a31..21bf977 100644
--- a/include/configs/tegra20-common.h
+++ b/include/configs/tegra20-common.h
@@ -24,11 +24,6 @@
  */
 #define V_NS16550_CLK		216000000	/* 216MHz (pllp_out0) */
 
-/*
- * High Level Configuration Options
- */
-#define CONFIG_TEGRA20				/* in a NVidia Tegra20 core */
-
 /* Environment information, boards can override if required */
 #define CONFIG_LOADADDR		0x00408000	/* def. location for kernel */
 
@@ -49,6 +44,9 @@
  * scriptaddr can be pretty much anywhere that doesn't conflict with something
  *   else. Put it above BOOTMAPSZ to eliminate conflicts.
  *
+ * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
+ *   something else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
  * kernel_addr_r must be within the first 128M of RAM in order for the
  *   kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
  *   decompress itself to 0x8000 after the start of RAM, kernel_addr_r
@@ -66,6 +64,7 @@
  */
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"scriptaddr=0x10000000\0" \
+	"pxefile_addr_r=0x10100000\0" \
 	"kernel_addr_r=0x01000000\0" \
 	"fdt_addr_r=0x02000000\0" \
 	"ramdisk_addr_r=0x02100000\0"
@@ -96,6 +95,7 @@
  */
 #define CONFIG_USB_EHCI_TXFIFO_THRESH	10
 #define CONFIG_EHCI_IS_TDI
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 
 /* Total I2C ports on Tegra20 */
 #define TEGRA_I2C_NUM_CONTROLLERS	4
diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h
index b5550d7..443c842 100644
--- a/include/configs/tegra30-common.h
+++ b/include/configs/tegra30-common.h
@@ -23,11 +23,6 @@
  */
 #define V_NS16550_CLK		408000000	/* 408MHz (pllp_out0) */
 
-/*
- * High Level Configuration Options
- */
-#define CONFIG_TEGRA30			/* in a NVidia Tegra30 core */
-
 /* Environment information, boards can override if required */
 #define CONFIG_LOADADDR		0x80408000	/* def. location for kernel */
 
@@ -48,6 +43,9 @@
  * scriptaddr can be pretty much anywhere that doesn't conflict with something
  *   else. Put it above BOOTMAPSZ to eliminate conflicts.
  *
+ * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
+ *   something else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
  * kernel_addr_r must be within the first 128M of RAM in order for the
  *   kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
  *   decompress itself to 0x8000 after the start of RAM, kernel_addr_r
@@ -65,6 +63,7 @@
  */
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"scriptaddr=0x90000000\0" \
+	"pxefile_addr_r=0x90100000\0" \
 	"kernel_addr_r=0x81000000\0" \
 	"fdt_addr_r=0x82000000\0" \
 	"ramdisk_addr_r=0x82100000\0"
@@ -80,5 +79,6 @@
 /* For USB EHCI controller */
 #define CONFIG_EHCI_IS_TDI
 #define CONFIG_USB_EHCI_TXFIFO_THRESH	0x10
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 
 #endif /* _TEGRA30_COMMON_H_ */
diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h
index ba16b1c..b51400c 100644
--- a/include/configs/ti814x_evm.h
+++ b/include/configs/ti814x_evm.h
@@ -233,7 +233,6 @@
 #define CONFIG_NET_MULTI
 #define CONFIG_PHY_GIGE
 #define CONFIG_PHYLIB
-#define CONFIG_PHY_ADDR			1
 #define CONFIG_PHY_ET1011C
 #define CONFIG_PHY_ET1011C_TX_CLK_FIX
 
diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index 7e9ca01..50c3203 100644
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -30,6 +30,7 @@
 /* Network defines. */
 #define CONFIG_CMD_NET			/* 'bootp' and 'tftp' */
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
 #define CONFIG_BOOTP_DNS		/* Configurable parts of CMD_DHCP */
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
diff --git a/include/cpsw.h b/include/cpsw.h
index 743cb96..a73843d 100644
--- a/include/cpsw.h
+++ b/include/cpsw.h
@@ -19,7 +19,7 @@
 struct cpsw_slave_data {
 	u32		slave_reg_ofs;
 	u32		sliver_reg_ofs;
-	int		phy_id;
+	int		phy_addr;
 	int		phy_if;
 };
 
diff --git a/include/nand.h b/include/nand.h
index 84116f4..fc735d1 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -21,10 +21,16 @@
  * at the same time, so do it here.  When all drivers are
  * converted, this will go away.
  */
+#ifdef CONFIG_SPL_BUILD
+#if defined(CONFIG_NAND_FSL_ELBC) || defined(CONFIG_NAND_FSL_IFC)
+#define CONFIG_SYS_NAND_SELF_INIT
+#endif
+#else
 #if defined(CONFIG_NAND_FSL_ELBC) || defined(CONFIG_NAND_ATMEL)\
 	|| defined(CONFIG_NAND_FSL_IFC)
 #define CONFIG_SYS_NAND_SELF_INIT
 #endif
+#endif
 
 extern void nand_init(void);