Merge with /home/stefan/git/u-boot/denx

29 files changed, 1374 insertions, 96 deletions

diff --git a/include/405_mal.h b/include/405_mal.h
index 0598586..2a42184 100644
--- a/include/405_mal.h
+++ b/include/405_mal.h
@@ -92,7 +92,7 @@
 #define MAL_ESR_PBEI	  0x00000001
       /* ^^			 ^^   */
       /* Mal IER		      */
-#ifdef CONFIG_440SPE
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 #define MAL_IER_PT	  0x00000080
 #define MAL_IER_PRE	  0x00000040
 #define MAL_IER_PWE	  0x00000020
diff --git a/include/440_i2c.h b/include/440_i2c.h
index 9c90a9e..0c2bf36 100644
--- a/include/440_i2c.h
+++ b/include/440_i2c.h
@@ -1,7 +1,8 @@
 #ifndef _440_i2c_h_
 #define _440_i2c_h_
 
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 #define    I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000700)
 #else
 #define    I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000400)
diff --git a/include/_exports.h b/include/_exports.h
index 61dcaaf..2b8ec3d 100644
--- a/include/_exports.h
+++ b/include/_exports.h
@@ -12,6 +12,9 @@ EXPORT_FUNC(udelay)
 EXPORT_FUNC(get_timer)
 EXPORT_FUNC(vprintf)
 EXPORT_FUNC(do_reset)
+EXPORT_FUNC(getenv)
+EXPORT_FUNC(setenv)
+EXPORT_FUNC(simple_strtoul)
 #if (CONFIG_COMMANDS & CFG_CMD_I2C)
 EXPORT_FUNC(i2c_write)
 EXPORT_FUNC(i2c_read)
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 44b23f1..bbd3497 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -728,6 +728,10 @@
 #define PVR_440EP_RC	0x422218D4 /* 440EP rev C and 440GR rev B have same PVR */
 #define PVR_440GR_RA	0x422218D3 /* 440EP rev B and 440GR rev A have same PVR */
 #define PVR_440GR_RB	0x422218D4 /* 440EP rev C and 440GR rev B have same PVR */
+#define PVR_440EPX1_RA  0x216218D0 /* 440EPX rev A with Security / Kasumi */
+#define PVR_440EPX2_RA  0x216218D4 /* 440EPX rev A without Security / Kasumi */
+#define PVR_440GRX1_RA  0x216218D8 /* 440GRX rev A with Security / Kasumi */
+#define PVR_440GRX2_RA  0x216218DC /* 440GRX rev A without Security / Kasumi */
 #define PVR_440GX_RA	0x51B21850
 #define PVR_440GX_RB	0x51B21851
 #define PVR_440GX_RC	0x51B21892
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index f7aa55f..794a6d4 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -108,7 +108,8 @@ typedef struct bd_info {
 #endif
 
 #if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined (CONFIG_440GX) || \
-    defined(CONFIG_440EP) || defined(CONFIG_440GR)
+    defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 	unsigned int	bi_opbfreq;		/* OPB clock in Hz */
 	int		bi_iic_fast[2];		/* Use fast i2c mode */
 #endif
diff --git a/include/common.h b/include/common.h
index bd41ae1..bee2fb7 100644
--- a/include/common.h
+++ b/include/common.h
@@ -109,6 +109,12 @@ typedef volatile unsigned char	vu_char;
 #define debugX(level,fmt,args...)
 #endif	/* DEBUG */
 
+#define BUG() do { \
+        printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \
+	panic("BUG!"); \
+} while (0)
+#define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
+
 typedef void (interrupt_handler_t)(void *);
 
 #include <asm/u-boot.h> /* boot information for Linux kernel */
@@ -603,7 +609,7 @@ void	show_boot_progress (int status);
 #endif
 
 #ifdef CONFIG_INIT_CRITICAL
-#error CONFIG_INIT_CRITICAL is depracted!
+#error CONFIG_INIT_CRITICAL is deprecated!
 #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
 #endif
 
diff --git a/include/configs/CPCI440.h b/include/configs/CPCI440.h
index a5bc773..90d3a8d 100644
--- a/include/configs/CPCI440.h
+++ b/include/configs/CPCI440.h
@@ -31,7 +31,8 @@
 /*-----------------------------------------------------------------------
  * High Level Configuration Options
  *----------------------------------------------------------------------*/
-#define CONFIG_EBONY		1	    /* Board is ebony		*/
+#define CONFIG_CPCI440		1	    /* Board is ebony		*/
+#define CONFIG_440GP		1	    /* Specifc GP support	*/
 #define CONFIG_4xx		1	    /* ... PPC4xx family	*/
 #define CONFIG_BOARD_EARLY_INIT_F 1	    /* Call board_early_init_f	*/
 #undef	CFG_DRAM_TEST			    /* Disable-takes long time! */
diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h
index 7a1dada..ce969ec 100644
--- a/include/configs/CPU87.h
+++ b/include/configs/CPU87.h
@@ -527,7 +527,7 @@
 			 PSDMR_LDOTOPRE_1C		|\
 			 PSDMR_WRC_1C			|\
 			 PSDMR_CL_2)
-			 
+
 /*
  * Init Memory Controller:
  *
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index be83b67..e0de5c1 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -37,7 +37,8 @@
 #define CONFIG_TQM5200		1	/* ... on TQM5200 module		*/
 #undef CONFIG_TQM5200_REV100		/*  define for revision 100 modules	*/
 
-#ifndef CONFIG_CAM5200			/* On a Cameron board or ...		*/
+/* On a Cameron or on a FO300 board or ...				*/
+#if !defined(CONFIG_CAM5200) && !defined(CONFIG_FO300)
 #define CONFIG_STK52XX		1	/* ... on a STK52XX board		*/
 #endif
 
@@ -58,6 +59,20 @@
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps			*/
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
+#ifdef CONFIG_FO300
+#define CFG_DEVICE_NULLDEV		1	/* enable null device */
+#define CONFIG_SILENT_CONSOLE		1	/* enable silent startup */
+#define CONFIG_BOARD_EARLY_INIT_F	1	/* used to detect S1 switch position */
+#define CONFIG_USB_BIN_FIXUP		1	/* for a buggy USB device */
+#if 0
+#define FO300_SILENT_CONSOLE_WHEN_S1_CLOSED	1	/* silent console on PSC1 when S1 */
+							/* switch is closed */
+#endif
+
+#undef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED		/* silent console on PSC1 when S1 */
+							/* switch is open */
+#endif	/* CONFIG_FO300 */
+
 #ifdef CONFIG_STK52XX
 #define CONFIG_PS2KBD			/* AT-PS/2 Keyboard		*/
 #define CONFIG_PS2MULT			/* .. on PS/2 Multiplexer	*/
@@ -105,12 +120,18 @@
 #define CONFIG_VIDEO_SM501_32BPP
 #define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_VGA_AS_SINGLE_DEVICE
+
+#ifndef CONFIG_FO300
 #define CONFIG_CONSOLE_EXTRA_INFO
+#else
+#define CONFIG_VIDEO_BMP_LOGO
+#endif
+
+#define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_SPLASH_SCREEN
 #define CFG_CONSOLE_IS_IN_ENV
-#endif
+#endif /* #ifndef CONFIG_TQM5200S */
 
 #ifdef CONFIG_VIDEO
 #define ADD_BMP_CMD		CFG_CMD_BMP
@@ -124,7 +145,7 @@
 #define CONFIG_ISO_PARTITION
 
 /* USB */
-#ifdef CONFIG_STK52XX
+#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
 #define CONFIG_USB_OHCI
 #define ADD_USB_CMD		CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
@@ -148,7 +169,7 @@
 #endif
 
 /* IDE */
-#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX)
+#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX) || defined(CONFIG_FO300)
 #define ADD_IDE_CMD		(CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2)
 #else
 #define ADD_IDE_CMD		0
@@ -224,6 +245,12 @@
 		"erase FC000000 FC03FFFF;"				\
 		"cp.b 200000 FC000000 ${filesize};"			\
 		"protect on FC000000 FC03FFFF\0"
+#elif defined (CONFIG_FO300)
+#   define ENV_UPDT							\
+	"update=protect off FC000000 FC05FFFF;"				\
+		"erase FC000000 FC05FFFF;"				\
+		"cp.b 200000 FC000000 ${filesize};"			\
+		"protect on FC000000 FC05FFFF\0"
 #else
 # error "Unknown Carrier Board"
 #endif	/* CONFIG_STK52XX */
@@ -378,6 +405,13 @@
 						"2m(initrd),"		\
 						"8m(misc),"		\
 						"16m(big-fs)"
+#elif defined (CONFIG_FO300)
+#   define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:640k(firmware),"	\
+						"1408k(kernel),"	\
+						"2m(initrd),"		\
+						"4m(small-fs),"		\
+						"8m(misc),"		\
+						"16m(big-fs)"
 #else
 # error "Unknown Carrier Board"
 #endif	/* CONFIG_STK52XX */
@@ -450,15 +484,18 @@
  * use ALT CAN position: Bits 2-3 (mask: 0x30000000):
  *	00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
  *	01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
- *	      Use for REV200 STK52XX boards. Do not use with REV100 modules
- *	      (because, there I2C1 is used as I2C bus)
+ *	      Use for REV200 STK52XX boards and FO300 boards. Do not use
+ *	      with REV100 modules (because, there I2C1 is used as I2C bus)
  * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
  * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030)
  *	000 -> All PSC2 pins are GIOPs
  *	001 -> CAN1/2 on PSC2 pins
  *	       Use for REV100 STK52xx boards
+ *	01x -> Use AC97
+ * use PSC3: Bits 20-23 (mask: 0x00000f00)
+ *	1100 -> UART/SPI (on FO300 board)
  * use PSC6:
- *   on STK52xx:
+ *   on STK52xx and FO300:
  *	use as UART. Pins PSC6_0 to PSC6_3 are used.
  *	Bits 9:11 (mask: 0x00700000):
  *	   101 -> PSC6 : Extended POST test is not available
@@ -480,6 +517,8 @@
 #   define CFG_GPS_PORT_CONFIG	0x91500004
 #  endif
 # endif
+#elif defined (CONFIG_FO300)
+# define CFG_GPS_PORT_CONFIG	0x91502c24
 #else  /* TMQ5200 Inbetriebnahme-Board */
 # define CFG_GPS_PORT_CONFIG	0x81000004
 #endif
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index cec7e3e..92c7016 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -422,9 +422,9 @@ extern int tqm834x_num_flash_banks;
 #define CFG_SICRL	SICRL_LDP_A
 
 /* i-cache and d-cache disabled */
-#define CFG_HID0_INIT		0x000000000
-#define CFG_HID0_FINAL		CFG_HID0_INIT
-#define CFG_HID2		0x000000000
+#define CFG_HID0_INIT	0x000000000
+#define CFG_HID0_FINAL	CFG_HID0_INIT
+#define CFG_HID2	HID2_HBE
 
 /* DDR 0 - 512M */
 #define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
@@ -437,12 +437,21 @@ extern int tqm834x_num_flash_banks;
 #define CFG_IBAT2U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 
 /* PCI */
-#define CFG_IBAT3L	(CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#ifdef CONFIG_PCI
+#define CFG_IBAT3L	(CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 #define CFG_IBAT3U	(CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT4L	(CFG_PCI1_MEM_BASE + 0x10000000 | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT4L	(CFG_PCI1_MEM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
 #define CFG_IBAT4U	(CFG_PCI1_MEM_BASE + 0x10000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 #define CFG_IBAT5L	(CFG_PCI1_IO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 #define CFG_IBAT5U	(CFG_PCI1_IO_BASE + 0x10000000 | BATU_BL_16M | BATU_VS | BATU_VP)
+#else
+#define CFG_IBAT3L	(0)
+#define CFG_IBAT3U	(0)
+#define CFG_IBAT4L	(0)
+#define CFG_IBAT4U	(0)
+#define CFG_IBAT5L	(0)
+#define CFG_IBAT5U	(0)
+#endif
 
 /* IMMRBAR */
 #define CFG_IBAT6L	(CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index cd4339b..4961011 100644
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -73,6 +73,7 @@
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in SDRAM)
  *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
 #define CFG_INIT_RAM_ADDR	0x70000000		/* DCache       */
 #define CFG_INIT_RAM_END	(4 << 10)
 #define CFG_GBL_DATA_SIZE	256		    	/* num bytes initial data	*/
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index ce33b85..0c935bf 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -37,12 +37,12 @@
 
 #define CONFIG_MISC_INIT_R
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH 	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot	     		*/
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs 			*/
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value 	*/
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 /*
@@ -51,16 +51,36 @@
  *  To select console on the one of 8 external UARTs,
  * define CONFIG_QUART_CONSOLE as 1, 2, 3, or 4 for the first Quad UART,
  * or as 5, 6, 7, or 8 for the second Quad UART.
+ * COM11, COM12, COM13, COM14 are located on the second Quad UART.
  *
  *  CONFIG_PSC_CONSOLE must be undefined in this case.
  */
-/* #define CONFIG_QUART_CONSOLE	1	*/ /* console is on UART1 of QUART1	*/
+#if !defined(CONFIG_PRS200)
+/* MCC200 configuration: */
+#ifdef CONFIG_CONSOLE_COM12
+#define CONFIG_QUART_CONSOLE	6	/* console is on UARTF of QUART2	*/
+#else
+#define CONFIG_QUART_CONSOLE	8	/* console is on UARTH of QUART2	*/
+#endif
+#else
+/* PRS200 configuration: */
+#undef CONFIG_QUART_CONSOLE
+#endif /* CONFIG_PRS200 */
 /*
  *  To select console on PSC1, define CONFIG_PSC_CONSOLE as 1
  * and undefine CONFIG_QUART_CONSOLE.
  */
-#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1			*/
-#if defined(CONFIG_QUART_CONSOLE) && defined(CONFIG_PSC_CONSOLE)
+#if !defined(CONFIG_PRS200)
+/* MCC200 configuration: */
+#define CONFIG_SERIAL_MULTI	1
+#define CONFIG_PSC_CONSOLE	1	/* PSC1 may be COM */
+#define CONFIG_PSC_CONSOLE2	2	/* PSC2 is PSoC */
+#else
+/* PRS200 configuration: */
+#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1		*/
+#endif
+#if defined(CONFIG_QUART_CONSOLE) && defined(CONFIG_PSC_CONSOLE) && \
+	!defined(CONFIG_SERIAL_MULTI)
 #error "Select only one console device!"
 #endif
 #define CONFIG_BAUDRATE		115200
@@ -72,7 +92,7 @@
 
 /* USB */
 #define CONFIG_USB_OHCI
-#define ADD_USB_CMD             CFG_CMD_USB | CFG_CMD_FAT
+#define ADD_USB_CMD		CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
 
 /*
@@ -98,33 +118,46 @@
 
 #undef	CONFIG_BOOTARGS
 
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
+#define XMK_STR(x)		#x
+#define MK_STR(x)		XMK_STR(x)
+
+#ifdef CONFIG_PRS200
+# define CFG__BOARDNAME		"prs200"
+# define CFG__LINUX_CONSOLE	"ttyS0"
+#else
+# define CFG__BOARDNAME		"mcc200"
+# define CFG__LINUX_CONSOLE	"ttyEU7"
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
-	"hostname=mcc200\0"						\
+	"hostname=" CFG__BOARDNAME "\0"					\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=${serverip}:${rootpath}\0"			\
 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
 	"addip=setenv bootargs ${bootargs} "				\
 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
 		":${hostname}:${netdev}:off panic=1\0"			\
-	"flash_nfs=run nfsargs addip;"					\
+	"addcons=setenv bootargs ${bootargs} "				\
+		"console=${console},${baudrate}\0"			\
+	"flash_nfs=run nfsargs addip addcons;"				\
 		"bootm ${kernel_addr}\0"				\
-	"flash_self=run ramargs addip;"					\
+	"flash_self=run ramargs addip addcons;"				\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
+	"net_nfs=tftp 200000 ${bootfile};"				\
+		"run nfsargs addip addcons;bootm\0"			\
+	"console=" CFG__LINUX_CONSOLE "\0"				\
 	"rootpath=/opt/eldk/ppc_6xx\0"					\
-	"bootfile=/tftpboot/mcc200/uImage\0"				\
-	"baudrate=115200\0"						\
-	"load=tftp 200000 /tftpboot/mcc200/u-boot.bin\0"		\
-	"update=protect off FFF00000 +${filesize};"			\
-		"era FFF00000 +${filesize};"				\
-		"cp.b 200000 FFF00000 ${filesize}\0"		        \
-	"serverip=192.168.1.1\0"					\
-	"ipaddr=192.168.133.144\0"					\
-	"netmask=255.255.0.0\0"						\
+	"bootfile=/tftpboot/" CFG__BOARDNAME "/uImage\0"		\
+	"load=tftp 200000 /tftpboot/" CFG__BOARDNAME "/u-boot.bin\0"	\
+	"text_base=" MK_STR(TEXT_BASE) "\0"				\
+	"update=protect off ${text_base} +${filesize};"			\
+		"era ${text_base} +${filesize};"			\
+		"cp.b 200000 ${text_base} ${filesize}\0"		\
 	"unlock=yes\0"							\
-	"ethaddr=00:02:44:7D:73:3B\0"					\
 	""
+#undef MK_STR
+#undef XMK_STR
 
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -134,7 +167,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133   		/* define for 133MHz speed */
+#define CFG_IPBSPEED_133		/* define for 133MHz speed */
 
 /*
  * I2C configuration
@@ -150,9 +183,9 @@
  * TEXT base always at 0xFFF00000
  * ENV_ADDR always at  0xFFF40000
  * FLASH_BASE at 0xFC000000 for 64 MB (only 32MB are supported, not enough addr lines!!!)
- *               0xFE000000 for 32 MB
- *               0xFF000000 for 16 MB
- *               0xFF800000 for  8 MB
+ *		 0xFE000000 for 32 MB
+ *		 0xFF000000 for 16 MB
+ *		 0xFF800000 for  8 MB
  */
 #define CFG_FLASH_BASE		0xfc000000
 #define CFG_FLASH_SIZE		0x04000000
@@ -174,9 +207,9 @@
 #define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 #define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
 
-#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#define CFG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars	*/
 
-#define CFG_ENV_SECT_SIZE	0x40000 	/* size of one complete sector	*/
+#define CFG_ENV_SECT_SIZE	0x40000	/* size of one complete sector	*/
 #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
 #define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
@@ -206,7 +239,7 @@
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE    TEXT_BASE
+#define CFG_MONITOR_BASE	TEXT_BASE
 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
 #   define CFG_RAMBOOT		1
 #endif
@@ -226,27 +259,45 @@
 #define CONFIG_PHY_ADDR		1
 
 /*
+ * LCD Splash Screen
+ */
+#if !defined(CONFIG_PRS200)
+#define CONFIG_LCD		1
+#endif
+
+#if defined(CONFIG_LCD)
+#define CONFIG_SPLASH_SCREEN	1
+#define CFG_CONSOLE_IS_IN_ENV	1
+#define LCD_BPP			LCD_MONOCHROME
+#endif
+
+/*
  * GPIO configuration
  */
 /* 0x10000004 = 32MB SDRAM */
 /* 0x90000004 = 64MB SDRAM */
+#if defined(CONFIG_LCD)
+/* set PSC2 in UART mode */
+#define CFG_GPS_PORT_CONFIG	0x00000044
+#else
 #define CFG_GPS_PORT_CONFIG	0x00000004
+#endif
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size	*/
 #define CFG_MAXARGS		16		/* max number of command args	*/
 #define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
+#define CFG_MEMTEST_START	0x00100000	/* memtest works on	*/
 #define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
 #define CFG_LOAD_ADDR		0x100000	/* default load address */
@@ -309,7 +360,7 @@
  * One of four SC16C554 UARTs is selected with
  * A3-A4 (DA5-DA6) lines.
  */
-#if (CONFIG_QUART_CONSOLE > 0) && (CONFIG_QUART_CONSOLE < 5)
+#if (CONFIG_QUART_CONSOLE > 0) && (CONFIG_QUART_CONSOLE < 5) && !defined(CONFIG_PRS200)
 #define CFG_NS16550_COM1	(CFG_CS2_START | (CONFIG_QUART_CONSOLE - 1)<<5)
 #elif (CONFIG_QUART_CONSOLE > 4) && (CONFIG_QUART_CONSOLE < 9)
 #define CFG_NS16550_COM1	(CFG_CS1_START | (CONFIG_QUART_CONSOLE - 5)<<5)
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 50c1c4f..23bdfc8 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -63,6 +63,7 @@
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in SDRAM)
  *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
 #define CFG_INIT_RAM_ADDR	0x70000000		/* DCache       */
 #define CFG_INIT_RAM_END	(8 << 10)
 #define CFG_GBL_DATA_SIZE	256			/* num bytes initial data*/
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
new file mode 100644
index 0000000..f67fd91
--- /dev/null
+++ b/include/configs/sequoia.h
@@ -0,0 +1,429 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * sequoia.h - configuration for Sequoia board (PowerPC440EPx)
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+/* This config file is used for Sequoia (440EPx) and Rainier (440GRx) */
+#ifndef CONFIG_RAINIER
+#define CONFIG_SEQUOIA		1		/* Board is Sequoia	*/
+#define CONFIG_440EPX		1		/* Specific PPC440EPx	*/
+#else
+#define CONFIG_440GRX		1		/* Specific PPC440GRx	*/
+#endif
+#define CONFIG_4xx		1		/* ... PPC4xx family	*/
+#define CONFIG_SYS_CLK_FREQ	33333333	/* external freq to pll	*/
+
+#define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R	1		/* Call misc_init_r	*/
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN		(384 * 1024)	/* Reserve 384 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
+
+#define CFG_BOOT_BASE_ADDR	0xf0000000
+#define CFG_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
+#define CFG_FLASH_BASE		0xfe000000	/* start of FLASH	*/
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_NAND_ADDR		0xd0000000      /* NAND Flash		*/
+#define CFG_OCM_BASE		0xe0010000      /* ocm			*/
+#define CFG_PCI_BASE		0xe0000000      /* Internal PCI regs	*/
+#define CFG_PCI_MEMBASE		0x80000000	/* mapped pci memory	*/
+#define CFG_PCI_MEMBASE1	CFG_PCI_MEMBASE  + 0x10000000
+#define CFG_PCI_MEMBASE2	CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3	CFG_PCI_MEMBASE2 + 0x10000000
+
+/* Don't change either of these */
+#define CFG_PERIPHERAL_BASE	0xef600000	/* internal peripherals	*/
+
+#define CFG_USB2D0_BASE		0xe0000100
+#define CFG_USB_DEVICE		0xe0000000
+#define CFG_USB_HOST		0xe0000400
+#define CFG_BCSR_BASE		0xc0000000
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer
+ *----------------------------------------------------------------------*/
+/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache	*/
+#define CFG_INIT_RAM_OCM	1		/* OCM as init ram	*/
+#define CFG_INIT_RAM_ADDR	CFG_OCM_BASE	/* OCM			*/
+
+#define CFG_INIT_RAM_END	(4 << 10)
+#define CFG_GBL_DATA_SIZE	256		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#define CFG_EXT_SERIAL_CLOCK	11059200	/* ext. 11.059MHz clk	*/
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SERIAL_MULTI     1
+/* define this if you want console on UART1 */
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE						\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#else
+#define CFG_ENV_IS_IN_NAND	1	/* use NAND for environment vars	*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_CFI				/* The flash is CFI compatible	*/
+#define CFG_FLASH_CFI_DRIVER			/* Use common CFI driver	*/
+
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CFG_FLASH_PROTECTION	1	/* use hardware flash protection	*/
+
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	0x20000 	/* size of one complete sector	*/
+#define CFG_ENV_ADDR		((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#endif
+
+/*-----------------------------------------------------------------------
+ * NAND FLASH
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_NAND_DEVICE	1
+#define NAND_MAX_CHIPS		1
+#define CFG_NAND_BASE		CFG_NAND_ADDR
+
+/*
+ * IPL (Initial Program Loader, integrated inside CPU)
+ * Will load first 4k from NAND (SPL) into cache and execute it from there.
+ *
+ * SPL (Secondary Program Loader)
+ * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
+ * has to fit into 4kByte. It sets up the CPU and configures the SDRAM
+ * controller and the NAND controller so that the special U-Boot image can be
+ * loaded from NAND to SDRAM.
+ *
+ * NUB (NAND U-Boot)
+ * This NAND U-Boot (NUB) is a special U-Boot version which can be started
+ * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
+ *
+ * On 440EPx the SPL is copied to SDRAM before the NAND controller is
+ * set up. While still running from cache, I experienced problems accessing
+ * the NAND controller.	sr - 2006-08-25
+ */
+#define CFG_NAND_BOOT_SPL_SRC	0xfffff000	/* SPL location			*/
+#define CFG_NAND_BOOT_SPL_SIZE	(4 << 10)	/* SPL size			*/
+#define CFG_NAND_BOOT_SPL_DST	(CFG_OCM_BASE + (12 << 10)) /* Copy SPL here	*/
+#define CFG_NAND_U_BOOT_DST	0x01000000	/* Load NUB to this addr	*/
+#define CFG_NAND_U_BOOT_START	CFG_NAND_U_BOOT_DST /* Start NUB from this addr	*/
+#define CFG_NAND_BOOT_SPL_DELTA	(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)
+
+/*
+ * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
+ */
+#define CFG_NAND_U_BOOT_OFFS	(16 << 10)	/* Offset to RAM U-Boot image	*/
+#define CFG_NAND_U_BOOT_SIZE	(384 << 10)	/* Size of RAM U-Boot image	*/
+
+/*
+ * Now the NAND chip has to be defined (no autodetection used!)
+ */
+#define CFG_NAND_PAGE_SIZE	(512)		/* NAND chip page size		*/
+#define CFG_NAND_BLOCK_SIZE	(16 << 10)	/* NAND chip block size		*/
+#define CFG_NAND_PAGE_COUNT	(32)		/* NAND chip page count		*/
+#define CFG_NAND_BAD_BLOCK_POS	(5)		/* Location of bad block marker	*/
+#undef CFG_NAND_4_ADDR_CYCLE			/* No fourth addr used (<=32MB)	*/
+
+#ifdef CFG_ENV_IS_IN_NAND
+/*
+ * For NAND booting the environment is embedded in the U-Boot image. Please take
+ * look at the file board/amcc/sequoia/u-boot-nand.lds for details.
+ */
+#define CFG_ENV_SIZE		CFG_NAND_BLOCK_SIZE
+#define CFG_ENV_OFFSET		(CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE)
+#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET + CFG_ENV_SIZE)
+#endif
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CFG_MBYTES_SDRAM        (256)    /* 256MB			*/
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C		1		/* I2C with hardware support	*/
+#undef	CONFIG_SOFT_I2C				/* I2C bit-banged		*/
+#define CFG_I2C_SPEED		400000		/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/* I2C SYSMON (LM75, AD7414 is almost compatible)			*/
+#define CONFIG_DTT_LM75		1		/* ON Semi's LM75	*/
+#define CONFIG_DTT_AD7414	1		/* use AD7414		*/
+#define CONFIG_DTT_SENSORS	{0}		/* Sensor addresses	*/
+#define CFG_DTT_MAX_TEMP	70
+#define CFG_DTT_LOW_TEMP	-30
+#define CFG_DTT_HYSTERESIS	3
+
+#define CONFIG_PREBOOT	"echo;"						\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"hostname=sequoia\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
+	        "bootm\0"						\
+	"rootpath=/opt/eldk/ppc_4xx\0"					\
+	"bootfile=/tftpboot/sequoia/uImage\0"				\
+	"kernel_addr=FE000000\0"					\
+	"ramdisk_addr=FE180000\0"					\
+	"load=tftp 100000 /tftpboot/sequoia/u-boot.bin\0"		\
+	"update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;"	\
+		"cp.b 100000 FFFA0000 60000\0"			        \
+	"upd=run load;run update\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#if 0
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
+#else
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+#endif
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+
+#define CONFIG_M88E1111_PHY	1
+#define	CONFIG_IBM_EMAC4_V4	1
+#define CONFIG_MII		1	/* MII PHY management		*/
+#define CONFIG_PHY_ADDR		0	/* PHY address, See schematics	*/
+
+#define CONFIG_PHY_RESET        1	/* reset phy upon startup         */
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+
+#define CONFIG_HAS_ETH0
+#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_NET_MULTI	1
+#define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"	*/
+#define CONFIG_PHY1_ADDR	1
+
+/* USB */
+#ifdef CONFIG_440EPX
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+/* Comment this out to enable USB 1.1 device */
+#define USB_2_0_DEVICE
+
+#define CMD_USB			CFG_CMD_USB
+#else
+#define CMD_USB			0	/* no USB on 440GRx		*/
+#endif /* CONFIG_440EPX */
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#define CONFIG_COMMANDS       (CONFIG_CMD_DFL	|	\
+			       CFG_CMD_ASKENV	|	\
+			       CFG_CMD_DHCP	|	\
+			       CFG_CMD_DTT	|	\
+			       CFG_CMD_DIAG	|	\
+			       CFG_CMD_EEPROM	|	\
+			       CFG_CMD_ELF	|	\
+			       CFG_CMD_FAT	|	\
+			       CFG_CMD_I2C	|	\
+			       CFG_CMD_IRQ	|	\
+			       CFG_CMD_MII	|	\
+			       CFG_CMD_NAND	|	\
+			       CFG_CMD_NET	|	\
+			       CFG_CMD_NFS	|	\
+			       CFG_CMD_PCI	|	\
+			       CFG_CMD_PING	|	\
+			       CFG_CMD_REGINFO	|	\
+			       CFG_CMD_SDRAM	|	\
+			       CMD_USB)
+
+#define CONFIG_SUPPORT_VFAT
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	        16	/* max number of command args	*/
+#define CFG_BARGSIZE	        CFG_CBSIZE /* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0400000 /* memtest works on		*/
+#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x100000  /* default load address	*/
+#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+
+#define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *----------------------------------------------------------------------*/
+/* General PCI */
+#define CONFIG_PCI			/* include pci support	        */
+#define CONFIG_PCI_PNP			/* do (not) pci plug-and-play   */
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup  */
+#define CFG_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT		/* enable board pci_pre_init()	*/
+#define CFG_PCI_TARGET_INIT
+#define CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC				*/
+#define CFG_PCI_SUBSYS_ID       0xcafe	/* Whatever			*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH		CFG_FLASH_BASE
+#define CFG_NAND		0xD0000000
+#define CFG_CPLD		0xC0000000
+
+/*
+ * On Sequoia CS0 and CS3 are switched when configuring for NAND booting
+ */
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CFG_NAND_CS		3		/* NAND chip connected to CSx	*/
+/* Memory Bank 0 (NOR-FLASH) initialization					*/
+#define CFG_EBC_PB0AP		0x03017300
+#define CFG_EBC_PB0CR		(CFG_FLASH | 0xba000)
+
+/* Memory Bank 3 (NAND-FLASH) initialization					*/
+#define CFG_EBC_PB3AP		0x018003c0
+#define CFG_EBC_PB3CR		(CFG_NAND | 0x1c000)
+#else
+#define CFG_NAND_CS		0		/* NAND chip connected to CSx	*/
+/* Memory Bank 3 (NOR-FLASH) initialization					*/
+#define CFG_EBC_PB3AP		0x03017300
+#define CFG_EBC_PB3CR		(CFG_FLASH | 0xba000)
+
+/* Memory Bank 0 (NAND-FLASH) initialization					*/
+#define CFG_EBC_PB0AP		0x018003c0
+#define CFG_EBC_PB0CR		(CFG_NAND | 0x1c000)
+#endif
+
+/* Memory Bank 2 (CPLD) initialization						*/
+#define CFG_EBC_PB2AP		0x24814580
+#define CFG_EBC_PB2CR		(CFG_CPLD | 0x38000)
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ *----------------------------------------------------------------------*/
+#define CFG_DCACHE_SIZE		(32<<10)  /* For AMCC 440 CPUs			*/
+#define CFG_CACHELINE_SIZE	32	      /* ...			            */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	      /* log base 2 of the above value	*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	    /* which serial port to use */
+#endif
+#endif	/* __CONFIG_H */
diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h
index 3d907f8..4937638 100644
--- a/include/configs/sorcery.h
+++ b/include/configs/sorcery.h
@@ -261,6 +261,7 @@
 #define CONFIG_MPC8220_FEC	1
 #define CONFIG_FEC_10MBIT	1 /* Workaround for FEC 100Mbit problem */
 #define CONFIG_PHY_ADDR		0x1F
+#define CONFIG_MII		1
 
 /*
  * Miscellaneous configurable options
diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h
index cf42b66..ba27f37 100644
--- a/include/configs/yellowstone.h
+++ b/include/configs/yellowstone.h
@@ -65,6 +65,7 @@
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in SDRAM)
  *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
 #define CFG_INIT_RAM_ADDR	0x70000000		/* DCache       */
 #define CFG_INIT_RAM_END	(8 << 10)
 #define CFG_GBL_DATA_SIZE	256			/* num bytes initial data*/
@@ -109,6 +110,8 @@
 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
+#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+
 #define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 #ifdef CFG_ENV_IS_IN_FLASH
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index 86a85b8..3d7b4a2 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -65,6 +65,7 @@
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in SDRAM)
  *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
 #define CFG_INIT_RAM_ADDR	0x70000000		/* DCache       */
 #define CFG_INIT_RAM_END	(8 << 10)
 #define CFG_GBL_DATA_SIZE	256			/* num bytes initial data*/
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index 884f85c..a6532b5 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -31,9 +31,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define DEBUG
-#undef DEBUG
-
 /*-----------------------------------------------------------------------
  * High Level Configuration Options
  *----------------------------------------------------------------------*/
diff --git a/include/environment.h b/include/environment.h
index 422f800..26b0712 100644
--- a/include/environment.h
+++ b/include/environment.h
@@ -79,6 +79,10 @@
 # ifdef CFG_ENV_OFFSET_REDUND
 #  define CFG_REDUNDAND_ENVIRONMENT
 # endif
+# if defined(CONFIG_NAND_U_BOOT)
+/* Use embedded environment in NAND boot versions */
+#  define ENV_IS_EMBEDDED	1
+# endif
 #endif /* CFG_ENV_IS_IN_NAND */
 
 
diff --git a/include/exports.h b/include/exports.h
index 0eaf66e..8f7f617 100644
--- a/include/exports.h
+++ b/include/exports.h
@@ -20,6 +20,9 @@ void udelay(unsigned long);
 unsigned long get_timer(unsigned long);
 void vprintf(const char *, va_list);
 void do_reset (void);
+unsigned long simple_strtoul(const char *cp,char **endp,unsigned int base);
+char *getenv (char *name);
+void setenv (char *varname, char *varvalue);
 #if (CONFIG_COMMANDS & CFG_CMD_I2C)
 int i2c_write (uchar, uint, int , uchar* , int);
 int i2c_read (uchar, uint, int , uchar* , int);
@@ -37,7 +40,7 @@ enum {
 	XF_MAX
 };
 
-#define XF_VERSION	2
+#define XF_VERSION	3
 
 #if defined(CONFIG_I386)
 extern gd_t *global_data;
diff --git a/include/fat.h b/include/fat.h
index 0645458..92638d5 100644
--- a/include/fat.h
+++ b/include/fat.h
@@ -175,15 +175,19 @@ typedef struct dir_slot {
 	__u8    name11_12[4];	/* Last 2 characters in name */
 } dir_slot;
 
-/* Private filesystem parameters */
+/* Private filesystem parameters
+ *
+ * Note: FAT buffer has to be 32 bit aligned
+ * (see FAT32 accesses)
+ */
 typedef struct {
+	__u8	fatbuf[FATBUFSIZE]; /* Current FAT buffer */
 	int	fatsize;	/* Size of FAT in bits */
 	__u16	fatlength;	/* Length of FAT in sectors */
 	__u16	fat_sect;	/* Starting sector of the FAT */
 	__u16	rootdir_sect;	/* Start sector of root directory */
 	__u16	clust_size;	/* Size of clusters in sectors */
 	short	data_begin;	/* The sector of the first cluster, can be negative */
-	__u8	fatbuf[FATBUFSIZE]; /* Current FAT buffer */
 	int	fatbufnum;	/* Used by get_fatent, init to -1 */
 } fsdata;
 
diff --git a/include/lcd.h b/include/lcd.h
index 7e23736..b688583 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -148,7 +148,14 @@ typedef struct vidinfo {
 
 extern vidinfo_t panel_info;
 
-#endif /* CONFIG_MPC823 or CONFIG_PXA250 */
+#elif defined(CONFIG_MCC200)
+typedef struct vidinfo {
+	ushort	vl_col;		/* Number of columns (i.e. 160) */
+	ushort	vl_row;		/* Number of rows (i.e. 100) */
+
+	u_char	vl_bpix;	/* Bits per pixel, 0 = 1 */
+} vidinfo_t;
+#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 */
 
 /* Video functions */
 
diff --git a/include/linux/mtd/compat.h b/include/linux/mtd/compat.h
index 460cd45..fe55087 100644
--- a/include/linux/mtd/compat.h
+++ b/include/linux/mtd/compat.h
@@ -31,11 +31,13 @@
 #define max_t(type,x,y) \
 	({ type __x = (x); type __y = (y); __x > __y ? __x: __y; })
 
+#ifndef BUG
 #define BUG() do { \
 	printf("U-Boot BUG at %s:%d!\n", __FILE__, __LINE__); \
 } while (0)
 
 #define BUG_ON(condition) do { if (condition) BUG(); } while(0)
+#endif /* BUG */
 
 #define likely(x)	__builtin_expect(!!(x), 1)
 #define unlikely(x)	__builtin_expect(!!(x), 0)
diff --git a/include/linux/mtd/ndfc.h b/include/linux/mtd/ndfc.h
new file mode 100644
index 0000000..d0558a9
--- /dev/null
+++ b/include/linux/mtd/ndfc.h
@@ -0,0 +1,67 @@
+/*
+ *  linux/include/linux/mtd/ndfc.h
+ *
+ *  Copyright (c) 2006 Thomas Gleixner <tglx@linutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Info:
+ *   Contains defines, datastructures for ndfc nand controller
+ *
+ */
+#ifndef __LINUX_MTD_NDFC_H
+#define __LINUX_MTD_NDFC_H
+
+/* NDFC Register definitions */
+#define NDFC_CMD		0x00
+#define NDFC_ALE		0x04
+#define NDFC_DATA		0x08
+#define NDFC_ECC		0x10
+#define NDFC_BCFG0		0x30
+#define NDFC_BCFG1		0x34
+#define NDFC_BCFG2		0x38
+#define NDFC_BCFG3		0x3c
+#define NDFC_CCR		0x40
+#define NDFC_STAT		0x44
+#define NDFC_HWCTL		0x48
+#define NDFC_REVID		0x50
+
+#define NDFC_STAT_IS_READY	0x01000000
+
+#define NDFC_CCR_RESET_CE	0x80000000 /* CE Reset */
+#define NDFC_CCR_RESET_ECC	0x40000000 /* ECC Reset */
+#define NDFC_CCR_RIE		0x20000000 /* Interrupt Enable on Device Rdy */
+#define NDFC_CCR_REN		0x10000000 /* Enable wait for Rdy in LinearR */
+#define NDFC_CCR_ROMEN		0x08000000 /* Enable ROM In LinearR */
+#define NDFC_CCR_ARE		0x04000000 /* Auto-Read Enable */
+#define NDFC_CCR_BS(x)		(((x) & 0x3) << 24) /* Select Bank on CE[x] */
+#define NDFC_CCR_BS_MASK	0x03000000 /* Select Bank */
+#define NDFC_CCR_ARAC0		0x00000000 /* 3 Addr, 1 Col 2 Row 512b page */
+#define NDFC_CCR_ARAC1		0x00001000 /* 4 Addr, 1 Col 3 Row 512b page */
+#define NDFC_CCR_ARAC2		0x00002000 /* 4 Addr, 2 Col 2 Row 2K page */
+#define NDFC_CCR_ARAC3		0x00003000 /* 5 Addr, 2 Col 3 Row 2K page */
+#define NDFC_CCR_ARAC_MASK	0x00003000 /* Auto-Read mode Addr Cycles */
+#define NDFC_CCR_RPG		0x0000C000 /* Auto-Read Page */
+#define NDFC_CCR_EBCC		0x00000004 /* EBC Configuration Completed */
+#define NDFC_CCR_DHC		0x00000002 /* Direct Hardware Control Enable */
+
+#define NDFC_BxCFG_EN		0x80000000 /* Bank Enable */
+#define NDFC_BxCFG_CED		0x40000000 /* nCE Style */
+#define NDFC_BxCFG_SZ_MASK	0x08000000 /* Bank Size */
+#define NDFC_BxCFG_SZ_8BIT	0x00000000 /* 8bit */
+#define NDFC_BxCFG_SZ_16BIT	0x08000000 /* 16bit */
+
+#define NDFC_MAX_BANKS		4
+
+struct ndfc_controller_settings {
+	uint32_t	ccr_settings;
+	uint64_t	ndfc_erpn;
+};
+
+struct ndfc_chip_settings {
+	uint32_t	bank_settings;
+};
+
+#endif
diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h
index 50a6ac1..1d20d1d 100644
--- a/include/mpc5xxx.h
+++ b/include/mpc5xxx.h
@@ -232,23 +232,92 @@
 #define MPC5XXX_ICTL_PER_STS	(MPC5XXX_ICTL + 0x0030)
 #define MPC5XXX_ICTL_BUS_STS	(MPC5XXX_ICTL + 0x0038)
 
+#define NR_IRQS			64
+
+/* IRQ mapping - these are our logical IRQ numbers */
+#define MPC5XXX_CRIT_IRQ_NUM	4
+#define MPC5XXX_MAIN_IRQ_NUM	17
+#define MPC5XXX_SDMA_IRQ_NUM	17
+#define MPC5XXX_PERP_IRQ_NUM	23
+
+#define MPC5XXX_CRIT_IRQ_BASE	1
+#define MPC5XXX_MAIN_IRQ_BASE	(MPC5XXX_CRIT_IRQ_BASE + MPC5XXX_CRIT_IRQ_NUM)
+#define MPC5XXX_SDMA_IRQ_BASE	(MPC5XXX_MAIN_IRQ_BASE + MPC5XXX_MAIN_IRQ_NUM)
+#define MPC5XXX_PERP_IRQ_BASE	(MPC5XXX_SDMA_IRQ_BASE + MPC5XXX_SDMA_IRQ_NUM)
+
+#define MPC5XXX_IRQ0			(MPC5XXX_CRIT_IRQ_BASE + 0)
+#define MPC5XXX_SLICE_TIMER_0_IRQ	(MPC5XXX_CRIT_IRQ_BASE + 1)
+#define MPC5XXX_HI_INT_IRQ		(MPC5XXX_CRIT_IRQ_BASE + 2)
+#define MPC5XXX_CCS_IRQ			(MPC5XXX_CRIT_IRQ_BASE + 3)
+
+#define MPC5XXX_IRQ1			(MPC5XXX_MAIN_IRQ_BASE + 1)
+#define MPC5XXX_IRQ2			(MPC5XXX_MAIN_IRQ_BASE + 2)
+#define MPC5XXX_IRQ3			(MPC5XXX_MAIN_IRQ_BASE + 3)
+#define MPC5XXX_RTC_PINT_IRQ		(MPC5XXX_MAIN_IRQ_BASE + 5)
+#define MPC5XXX_RTC_SINT_IRQ		(MPC5XXX_MAIN_IRQ_BASE + 6)
+#define MPC5XXX_RTC_GPIO_STD_IRQ	(MPC5XXX_MAIN_IRQ_BASE + 7)
+#define MPC5XXX_RTC_GPIO_WKUP_IRQ	(MPC5XXX_MAIN_IRQ_BASE + 8)
+#define MPC5XXX_TMR0_IRQ		(MPC5XXX_MAIN_IRQ_BASE + 9)
+#define MPC5XXX_TMR1_IRQ		(MPC5XXX_MAIN_IRQ_BASE + 10)
+#define MPC5XXX_TMR2_IRQ		(MPC5XXX_MAIN_IRQ_BASE + 11)
+#define MPC5XXX_TMR3_IRQ		(MPC5XXX_MAIN_IRQ_BASE + 12)
+#define MPC5XXX_TMR4_IRQ		(MPC5XXX_MAIN_IRQ_BASE + 13)
+#define MPC5XXX_TMR5_IRQ		(MPC5XXX_MAIN_IRQ_BASE + 14)
+#define MPC5XXX_TMR6_IRQ		(MPC5XXX_MAIN_IRQ_BASE + 15)
+#define MPC5XXX_TMR7_IRQ		(MPC5XXX_MAIN_IRQ_BASE + 16)
+
+#define MPC5XXX_SDMA_IRQ		(MPC5XXX_PERP_IRQ_BASE + 0)
+#define MPC5XXX_PSC1_IRQ		(MPC5XXX_PERP_IRQ_BASE + 1)
+#define MPC5XXX_PSC2_IRQ		(MPC5XXX_PERP_IRQ_BASE + 2)
+#define MPC5XXX_PSC3_IRQ		(MPC5XXX_PERP_IRQ_BASE + 3)
+#define MPC5XXX_PSC6_IRQ		(MPC5XXX_PERP_IRQ_BASE + 4)
+#define MPC5XXX_IRDA_IRQ		(MPC5XXX_PERP_IRQ_BASE + 4)
+#define MPC5XXX_FEC_IRQ			(MPC5XXX_PERP_IRQ_BASE + 5)
+#define MPC5XXX_USB_IRQ			(MPC5XXX_PERP_IRQ_BASE + 6)
+#define MPC5XXX_ATA_IRQ			(MPC5XXX_PERP_IRQ_BASE + 7)
+#define MPC5XXX_PCI_CNTRL_IRQ		(MPC5XXX_PERP_IRQ_BASE + 8)
+#define MPC5XXX_PCI_SCIRX_IRQ		(MPC5XXX_PERP_IRQ_BASE + 9)
+#define MPC5XXX_PCI_SCITX_IRQ		(MPC5XXX_PERP_IRQ_BASE + 10)
+#define MPC5XXX_PSC4_IRQ		(MPC5XXX_PERP_IRQ_BASE + 11)
+#define MPC5XXX_PSC5_IRQ		(MPC5XXX_PERP_IRQ_BASE + 12)
+#define MPC5XXX_SPI_MODF_IRQ		(MPC5XXX_PERP_IRQ_BASE + 13)
+#define MPC5XXX_SPI_SPIF_IRQ		(MPC5XXX_PERP_IRQ_BASE + 14)
+#define MPC5XXX_I2C1_IRQ		(MPC5XXX_PERP_IRQ_BASE + 15)
+#define MPC5XXX_I2C2_IRQ		(MPC5XXX_PERP_IRQ_BASE + 16)
+#define MPC5XXX_MSCAN1_IRQ		(MPC5XXX_PERP_IRQ_BASE + 17)
+#define MPC5XXX_MSCAN2_IRQ		(MPC5XXX_PERP_IRQ_BASE + 18)
+#define MPC5XXX_IR_RX_IRQ		(MPC5XXX_PERP_IRQ_BASE + 19)
+#define MPC5XXX_IR_TX_IRQ		(MPC5XXX_PERP_IRQ_BASE + 20)
+#define MPC5XXX_XLB_ARB_IRQ		(MPC5XXX_PERP_IRQ_BASE + 21)
+#define MPC5XXX_BDLC_IRQ		(MPC5XXX_PERP_IRQ_BASE + 22)
+
 /* General Purpose Timers registers */
 #define MPC5XXX_GPT0_ENABLE		(MPC5XXX_GPT + 0x0)
 #define MPC5XXX_GPT0_COUNTER		(MPC5XXX_GPT + 0x4)
+#define MPC5XXX_GPT0_STATUS		(MPC5XXX_GPT + 0x0C)
 #define MPC5XXX_GPT1_ENABLE		(MPC5XXX_GPT + 0x10)
 #define MPC5XXX_GPT1_COUNTER		(MPC5XXX_GPT + 0x14)
+#define MPC5XXX_GPT1_STATUS		(MPC5XXX_GPT + 0x1C)
 #define MPC5XXX_GPT2_ENABLE		(MPC5XXX_GPT + 0x20)
 #define MPC5XXX_GPT2_COUNTER		(MPC5XXX_GPT + 0x24)
+#define MPC5XXX_GPT2_STATUS		(MPC5XXX_GPT + 0x2C)
 #define MPC5XXX_GPT3_ENABLE		(MPC5XXX_GPT + 0x30)
 #define MPC5XXX_GPT3_COUNTER		(MPC5XXX_GPT + 0x34)
+#define MPC5XXX_GPT3_STATUS		(MPC5XXX_GPT + 0x3C)
 #define MPC5XXX_GPT4_ENABLE		(MPC5XXX_GPT + 0x40)
 #define MPC5XXX_GPT4_COUNTER		(MPC5XXX_GPT + 0x44)
+#define MPC5XXX_GPT4_STATUS		(MPC5XXX_GPT + 0x4C)
 #define MPC5XXX_GPT5_ENABLE		(MPC5XXX_GPT + 0x50)
+#define MPC5XXX_GPT5_STATUS		(MPC5XXX_GPT + 0x5C)
 #define MPC5XXX_GPT5_COUNTER		(MPC5XXX_GPT + 0x54)
 #define MPC5XXX_GPT6_ENABLE		(MPC5XXX_GPT + 0x60)
 #define MPC5XXX_GPT6_COUNTER		(MPC5XXX_GPT + 0x64)
+#define MPC5XXX_GPT6_STATUS		(MPC5XXX_GPT + 0x6C)
 #define MPC5XXX_GPT7_ENABLE		(MPC5XXX_GPT + 0x70)
 #define MPC5XXX_GPT7_COUNTER		(MPC5XXX_GPT + 0x74)
+#define MPC5XXX_GPT7_STATUS		(MPC5XXX_GPT + 0x7C)
+
+#define MPC5XXX_GPT_GPIO_PIN(status)	((0x00000100 & (status)) >> 8)
 
 #define MPC5XXX_GPT7_PWMCFG		(MPC5XXX_GPT + 0x78)
 
diff --git a/include/ppc440.h b/include/ppc440.h
index b81e34d..0762e66 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -82,7 +82,10 @@
 #define	 ivor13 0x19d	/* interrupt vector offset register 13 */
 #define	 ivor14 0x19e	/* interrupt vector offset register 14 */
 #define	 ivor15 0x19f	/* interrupt vector offset register 15 */
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+    defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 #define	 mcsrr0 0x23a	/* machine check save/restore register 0 */
 #define	 mcsrr1 0x23b	/* mahcine check save/restore register 1 */
 #define	 mcsr	0x23c	/* machine check status register */
@@ -151,7 +154,18 @@
 #define sdr_ecid1	0x0081
 #define sdr_ecid2	0x0082
 #define sdr_jtag	0x00c0
+#if !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
 #define sdr_ddrdl	0x00e0
+#else
+#define sdr_cfg		0x00e0
+#define SDR_CFG_LT2_MASK          0x01000000 /* Leakage test 2*/
+#define SDR_CFG_64_32BITS_MASK    0x01000000 /* Switch DDR 64 bits or 32 bits */
+#define SDR_CFG_32BITS            0x00000000  /* 32 bits */
+#define SDR_CFG_64BITS            0x01000000  /* 64 bits */
+#define SDR_CFG_MC_V2518_MASK     0x02000000 /* Low VDD2518 (2.5 or 1.8V) */
+#define SDR_CFG_MC_V25            0x00000000  /* 2.5 V */
+#define SDR_CFG_MC_V18            0x02000000  /* 1.8 V */
+#endif /* !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) */
 #define sdr_ebc		0x0100
 #define sdr_uart0	0x0120	/* UART0 Config */
 #define sdr_uart1	0x0121	/* UART1 Config */
@@ -180,6 +194,54 @@
 #define sdr_plbtr	0x4200
 #define sdr_mfr		0x4300	/* SDR0_MFR reg */
 
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* test-only!!!! */
+#define DDR0_00	0x00
+#define DDR0_01	0x01
+#define DDR0_02	0x02
+#define DDR0_03	0x03
+#define DDR0_04	0x04
+#define DDR0_05	0x05
+#define DDR0_06	0x06
+#define DDR0_07	0x07
+#define DDR0_08	0x08
+#define DDR0_09	0x09
+#define DDR0_10	0x0A
+#define DDR0_11	0x0B
+#define DDR0_12	0x0C
+#define DDR0_13	0x0D
+#define DDR0_14	0x0E
+#define DDR0_15	0x0F
+#define DDR0_16	0x10
+#define DDR0_17	0x11
+#define DDR0_18	0x12
+#define DDR0_19	0x13
+#define DDR0_20	0x14
+#define DDR0_21	0x15
+#define DDR0_22	0x16
+#define DDR0_23	0x17
+#define DDR0_24	0x18
+#define DDR0_25	0x19
+#define DDR0_26	0x1A
+#define DDR0_27	0x1B
+#define DDR0_28	0x1C
+#define DDR0_29	0x1D
+#define DDR0_30	0x1E
+#define DDR0_31	0x1F
+#define DDR0_32	0x20
+#define DDR0_33	0x21
+#define DDR0_34	0x22
+#define DDR0_35	0x23
+#define DDR0_36	0x24
+#define DDR0_37	0x25
+#define DDR0_38	0x26
+#define DDR0_39	0x27
+#define DDR0_40	0x28
+#define DDR0_41	0x29
+#define DDR0_42	0x2A
+#define DDR0_43	0x2B
+#define DDR0_44	0x2C
+#endif /*CONFIG_440EPX*/
+
 /*-----------------------------------------------------------------------------
  | SDRAM Controller
  +----------------------------------------------------------------------------*/
@@ -787,7 +849,8 @@
 #define xbcfg		0x23	/* external bus configuration reg	*/
 #define xbcid		0x24	/* external bus core id reg		*/
 
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 
 /* PLB4 to PLB3 Bridge OUT */
 #define P4P3_DCR_BASE           0x020
@@ -877,6 +940,7 @@
 #define plb1_bearl                (PLB_ARBITER_BASE+ 0x0C)
 #define plb1_bearh                (PLB_ARBITER_BASE+ 0x0D)
 
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
 /* Pin Function Control Register 1 */
 #define SDR0_PFC1                    0x4101
 #define   SDR0_PFC1_U1ME_MASK         0x02000000    /* UART1 Mode Enable */
@@ -918,6 +982,178 @@
 #define   SDR0_USB0_LEEN_DISABLE      0x00000000      /* Little Endian Disable */
 #define   SDR0_USB0_LEEN_ENABLE       0x00000001      /* Little Endian Enable */
 
+/* Miscealleneaous Function Reg. */
+#define SDR0_MFR                     0x4300
+#define   SDR0_MFR_ETH0_CLK_SEL_MASK   0x08000000   /* Ethernet0 Clock Select */
+#define   SDR0_MFR_ETH0_CLK_SEL_EXT    0x00000000
+#define   SDR0_MFR_ETH1_CLK_SEL_MASK   0x04000000   /* Ethernet1 Clock Select */
+#define   SDR0_MFR_ETH1_CLK_SEL_EXT    0x00000000
+#define   SDR0_MFR_ZMII_MODE_MASK      0x03000000   /* ZMII Mode Mask */
+#define   SDR0_MFR_ZMII_MODE_MII       0x00000000     /* ZMII Mode MII */
+#define   SDR0_MFR_ZMII_MODE_SMII      0x01000000     /* ZMII Mode SMII */
+#define   SDR0_MFR_ZMII_MODE_RMII_10M  0x02000000     /* ZMII Mode RMII - 10 Mbs */
+#define   SDR0_MFR_ZMII_MODE_RMII_100M 0x03000000     /* ZMII Mode RMII - 100 Mbs */
+#define   SDR0_MFR_ZMII_MODE_BIT0      0x02000000     /* ZMII Mode Bit0 */
+#define   SDR0_MFR_ZMII_MODE_BIT1      0x01000000     /* ZMII Mode Bit1 */
+#define   SDR0_MFR_ZM_ENCODE(n)        ((((unsigned long)(n))&0x3)<<24)
+#define   SDR0_MFR_ZM_DECODE(n)        ((((unsigned long)(n))<<24)&0x3)
+
+#define   SDR0_MFR_ERRATA3_EN0         0x00800000
+#define   SDR0_MFR_ERRATA3_EN1         0x00400000
+#define   SDR0_MFR_PKT_REJ_MASK        0x00180000   /* Pkt Rej. Enable Mask */
+#define   SDR0_MFR_PKT_REJ_EN          0x00180000   /* Pkt Rej. Enable on both EMAC3 0-1 */
+#define   SDR0_MFR_PKT_REJ_EN0         0x00100000   /* Pkt Rej. Enable on EMAC3(0) */
+#define   SDR0_MFR_PKT_REJ_EN1         0x00080000   /* Pkt Rej. Enable on EMAC3(1) */
+#define   SDR0_MFR_PKT_REJ_POL         0x00200000   /* Packet Reject Polarity */
+
+#endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */
+
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR_USB2D0CR                 0x0320
+#define   SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK   0x00000004    /* USB 2.0 Device/EBC Master Selection */
+#define   SDR0_USB2D0CR_USB2DEV_SELECTION      0x00000004    /* USB 2.0 Device Selection */
+#define   SDR0_USB2D0CR_EBC_SELECTION          0x00000000    /* EBC Selection */
+
+#define   SDR0_USB2D0CR_USB_DEV_INT_SEL_MASK   0x00000002    /* USB Device Interface Selection */
+#define   SDR0_USB2D0CR_USB20D_DEVSEL          0x00000000      /* USB2.0 Device Selected */
+#define   SDR0_USB2D0CR_USB11D_DEVSEL          0x00000002      /* USB1.1 Device Selected */
+
+#define   SDR0_USB2D0CR_LEEN_MASK              0x00000001    /* Little Endian selection */
+#define   SDR0_USB2D0CR_LEEN_DISABLE           0x00000000      /* Little Endian Disable */
+#define   SDR0_USB2D0CR_LEEN_ENABLE            0x00000001      /* Little Endian Enable */
+
+/* USB2 Host Control Register */
+#define SDR0_USB2H0CR                0x0340
+#define   SDR0_USB2H0CR_WDINT_MASK             0x00000001 /* Host UTMI Word Interface */
+#define   SDR0_USB2H0CR_WDINT_8BIT_60MHZ       0x00000000  /* 8-bit/60MHz */
+#define   SDR0_USB2H0CR_WDINT_16BIT_30MHZ      0x00000001  /* 16-bit/30MHz */
+#define   SDR0_USB2H0CR_EFLADJ_MASK            0x0000007e /* EHCI Frame Length Adjustment */
+
+/* Pin Function Control Register 1 */
+#define SDR0_PFC1                    0x4101
+#define   SDR0_PFC1_U1ME_MASK                  0x02000000    /* UART1 Mode Enable */
+#define   SDR0_PFC1_U1ME_DSR_DTR               0x00000000      /* UART1 in DSR/DTR Mode */
+#define   SDR0_PFC1_U1ME_CTS_RTS               0x02000000      /* UART1 in CTS/RTS Mode */
+
+#define   SDR0_PFC1_SELECT_MASK                0x01C00000 /* Ethernet Pin Select EMAC 0 */
+#define   SDR0_PFC1_SELECT_CONFIG_1_1          0x00C00000   /* 1xMII   using RGMII bridge */
+#define   SDR0_PFC1_SELECT_CONFIG_1_2          0x00000000   /* 1xMII   using  ZMII bridge */
+#define   SDR0_PFC1_SELECT_CONFIG_2            0x00C00000   /* 1xGMII  using RGMII bridge */
+#define   SDR0_PFC1_SELECT_CONFIG_3            0x01000000   /* 1xTBI   using RGMII bridge */
+#define   SDR0_PFC1_SELECT_CONFIG_4            0x01400000   /* 2xRGMII using RGMII bridge */
+#define   SDR0_PFC1_SELECT_CONFIG_5            0x01800000   /* 2xRTBI  using RGMII bridge */
+#define   SDR0_PFC1_SELECT_CONFIG_6            0x00800000   /* 2xSMII  using  ZMII bridge */
+
+#define   SDR0_PFC1_U0ME_MASK                  0x00080000    /* UART0 Mode Enable */
+#define   SDR0_PFC1_U0ME_DSR_DTR               0x00000000      /* UART0 in DSR/DTR Mode */
+#define   SDR0_PFC1_U0ME_CTS_RTS               0x00080000      /* UART0 in CTS/RTS Mode */
+#define   SDR0_PFC1_U0IM_MASK                  0x00040000    /* UART0 Interface Mode */
+#define   SDR0_PFC1_U0IM_8PINS                 0x00000000      /* UART0 Interface Mode 8 pins */
+#define   SDR0_PFC1_U0IM_4PINS                 0x00040000      /* UART0 Interface Mode 4 pins */
+#define   SDR0_PFC1_SIS_MASK                   0x00020000    /* SCP or IIC1 Selection */
+#define   SDR0_PFC1_SIS_SCP_SEL                0x00000000      /* SCP Selected */
+#define   SDR0_PFC1_SIS_IIC1_SEL               0x00020000      /* IIC1 Selected */
+#define   SDR0_PFC1_UES_MASK                   0x00010000    /* USB2D_RX_Active / EBC_Hold Req Selection */
+#define   SDR0_PFC1_UES_USB2D_SEL              0x00000000      /* USB2D_RX_Active Selected */
+#define   SDR0_PFC1_UES_EBCHR_SEL              0x00010000      /* EBC_Hold Req Selected */
+#define   SDR0_PFC1_DIS_MASK                   0x00008000    /* DMA_Req(1) / UIC_IRQ(5) Selection */
+#define   SDR0_PFC1_DIS_DMAR_SEL               0x00000000      /* DMA_Req(1) Selected */
+#define   SDR0_PFC1_DIS_UICIRQ5_SEL            0x00008000      /* UIC_IRQ(5) Selected */
+#define   SDR0_PFC1_ERE_MASK                   0x00004000    /* EBC Mast.Ext.Req.En./GPIO0(27) Selection */
+#define   SDR0_PFC1_ERE_EXTR_SEL               0x00000000      /* EBC Mast.Ext.Req.En. Selected */
+#define   SDR0_PFC1_ERE_GPIO0_27_SEL           0x00004000      /* GPIO0(27) Selected */
+#define   SDR0_PFC1_UPR_MASK                   0x00002000    /* USB2 Device Packet Reject Selection */
+#define   SDR0_PFC1_UPR_DISABLE                0x00000000      /* USB2 Device Packet Reject Disable */
+#define   SDR0_PFC1_UPR_ENABLE                 0x00002000      /* USB2 Device Packet Reject Enable */
+
+#define   SDR0_PFC1_PLB_PME_MASK               0x00001000    /* PLB3/PLB4 Perf. Monitor En. Selection */
+#define   SDR0_PFC1_PLB_PME_PLB3_SEL           0x00000000      /* PLB3 Performance Monitor Enable */
+#define   SDR0_PFC1_PLB_PME_PLB4_SEL           0x00001000      /* PLB3 Performance Monitor Enable */
+#define   SDR0_PFC1_GFGGI_MASK                 0x0000000F    /* GPT Frequency Generation Gated In */
+
+/* Ethernet PLL Configuration Register */
+#define SDR0_PFC2                    0x4102
+#define   SDR0_PFC2_TUNE_MASK                  0x01FF8000  /* Loop stability tuning bits */
+#define   SDR0_PFC2_MULTI_MASK                 0x00007C00  /* Frequency multiplication selector */
+#define   SDR0_PFC2_RANGEB_MASK                0x00000380  /* PLLOUTB/C frequency selector */
+#define   SDR0_PFC2_RANGEA_MASK                0x00000071  /* PLLOUTA frequency selector */
+
+#define   SDR0_PFC2_SELECT_MASK                0xE0000000  /* Ethernet Pin select EMAC1 */
+#define   SDR0_PFC2_SELECT_CONFIG_1_1          0x60000000   /* 1xMII   using RGMII bridge */
+#define   SDR0_PFC2_SELECT_CONFIG_1_2          0x00000000   /* 1xMII   using  ZMII bridge */
+#define   SDR0_PFC2_SELECT_CONFIG_2            0x60000000   /* 1xGMII  using RGMII bridge */
+#define   SDR0_PFC2_SELECT_CONFIG_3            0x80000000   /* 1xTBI   using RGMII bridge */
+#define   SDR0_PFC2_SELECT_CONFIG_4            0xA0000000   /* 2xRGMII using RGMII bridge */
+#define   SDR0_PFC2_SELECT_CONFIG_5            0xC0000000   /* 2xRTBI  using RGMII bridge */
+#define   SDR0_PFC2_SELECT_CONFIG_6            0x40000000   /* 2xSMII  using  ZMII bridge */
+
+/* USB2PHY0 Control Register */
+#define SDR0_USB2PHY0CR               0x4103
+#define   SDR0_USB2PHY0CR_UTMICN_MASK          0x00100000 /*  PHY UTMI interface connection */
+#define   SDR0_USB2PHY0CR_UTMICN_DEV           0x00000000  /* Device support */
+#define   SDR0_USB2PHY0CR_UTMICN_HOST          0x00100000  /* Host support */
+
+#define   SDR0_USB2PHY0CR_DWNSTR_MASK          0x00400000 /* Select downstream port mode */
+#define   SDR0_USB2PHY0CR_DWNSTR_DEV           0x00000000  /* Device */
+#define   SDR0_USB2PHY0CR_DWNSTR_HOST          0x00400000  /* Host   */
+
+#define   SDR0_USB2PHY0CR_DVBUS_MASK           0x00800000 /* VBus detect (Device mode only)  */
+#define   SDR0_USB2PHY0CR_DVBUS_PURDIS         0x00000000  /* Pull-up resistance on D+ is disabled */
+#define   SDR0_USB2PHY0CR_DVBUS_PUREN          0x00800000  /* Pull-up resistance on D+ is enabled */
+
+#define   SDR0_USB2PHY0CR_WDINT_MASK           0x01000000 /* PHY UTMI data width and clock select  */
+#define   SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ     0x00000000  /* 8-bit data/60MHz */
+#define   SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ    0x01000000  /* 16-bit data/30MHz */
+
+#define   SDR0_USB2PHY0CR_LOOPEN_MASK          0x02000000 /* Loop back test enable  */
+#define   SDR0_USB2PHY0CR_LOOP_ENABLE          0x00000000  /* Loop back disabled */
+#define   SDR0_USB2PHY0CR_LOOP_DISABLE         0x02000000  /* Loop back enabled (only test purposes) */
+
+#define   SDR0_USB2PHY0CR_XOON_MASK            0x04000000 /* Force XO block on during a suspend  */
+#define   SDR0_USB2PHY0CR_XO_ON                0x00000000  /* PHY XO block is powered-on */
+#define   SDR0_USB2PHY0CR_XO_OFF               0x04000000  /* PHY XO block is powered-off when all ports are suspended */
+
+#define   SDR0_USB2PHY0CR_PWRSAV_MASK          0x08000000 /* Select PHY power-save mode  */
+#define   SDR0_USB2PHY0CR_PWRSAV_OFF           0x00000000  /* Non-power-save mode */
+#define   SDR0_USB2PHY0CR_PWRSAV_ON            0x08000000  /* Power-save mode. Valid only for full-speed operation */
+
+#define   SDR0_USB2PHY0CR_XOREF_MASK           0x10000000 /* Select reference clock source  */
+#define   SDR0_USB2PHY0CR_XOREF_INTERNAL       0x00000000  /* PHY PLL uses chip internal 48M clock as a reference */
+#define   SDR0_USB2PHY0CR_XOREF_XO             0x10000000  /* PHY PLL uses internal XO block output as a reference */
+
+#define   SDR0_USB2PHY0CR_XOCLK_MASK           0x20000000 /* Select clock for XO block  */
+#define   SDR0_USB2PHY0CR_XOCLK_EXTERNAL       0x00000000  /* PHY macro used an external clock */
+#define   SDR0_USB2PHY0CR_XOCLK_CRYSTAL        0x20000000  /* PHY macro uses the clock from a crystal */
+
+#define   SDR0_USB2PHY0CR_CLKSEL_MASK          0xc0000000 /* Select ref clk freq */
+#define   SDR0_USB2PHY0CR_CLKSEL_12MHZ         0x00000000 /* Select ref clk freq = 12 MHz*/
+#define   SDR0_USB2PHY0CR_CLKSEL_48MHZ         0x40000000 /* Select ref clk freq = 48 MHz*/
+#define   SDR0_USB2PHY0CR_CLKSEL_24MHZ         0x80000000 /* Select ref clk freq = 24 MHz*/
+
+/* Miscealleneaous Function Reg. */
+#define SDR0_MFR                     0x4300
+#define   SDR0_MFR_ETH0_CLK_SEL_MASK   0x08000000   /* Ethernet0 Clock Select */
+#define   SDR0_MFR_ETH0_CLK_SEL_EXT    0x00000000
+#define   SDR0_MFR_ETH1_CLK_SEL_MASK   0x04000000   /* Ethernet1 Clock Select */
+#define   SDR0_MFR_ETH1_CLK_SEL_EXT    0x00000000
+#define   SDR0_MFR_ZMII_MODE_MASK      0x03000000   /* ZMII Mode Mask */
+#define   SDR0_MFR_ZMII_MODE_MII       0x00000000     /* ZMII Mode MII */
+#define   SDR0_MFR_ZMII_MODE_SMII      0x01000000     /* ZMII Mode SMII */
+#define   SDR0_MFR_ZMII_MODE_BIT0      0x02000000     /* ZMII Mode Bit0 */
+#define   SDR0_MFR_ZMII_MODE_BIT1      0x01000000     /* ZMII Mode Bit1 */
+#define   SDR0_MFR_ZM_ENCODE(n)        ((((unsigned long)(n))&0x3)<<24)
+#define   SDR0_MFR_ZM_DECODE(n)        ((((unsigned long)(n))<<24)&0x3)
+
+#define   SDR0_MFR_ERRATA3_EN0         0x00800000
+#define   SDR0_MFR_ERRATA3_EN1         0x00400000
+#define   SDR0_MFR_PKT_REJ_MASK        0x00180000   /* Pkt Rej. Enable Mask */
+#define   SDR0_MFR_PKT_REJ_EN          0x00180000   /* Pkt Rej. Enable on both EMAC3 0-1 */
+#define   SDR0_MFR_PKT_REJ_EN0         0x00100000   /* Pkt Rej. Enable on EMAC3(0) */
+#define   SDR0_MFR_PKT_REJ_EN1         0x00080000   /* Pkt Rej. Enable on EMAC3(1) */
+#define   SDR0_MFR_PKT_REJ_POL         0x00200000   /* Packet Reject Polarity */
+
+#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */
+
 /* CUST0 Customer Configuration Register0 */
 #define SDR0_CUST0                   0x4000
 #define   SDR0_CUST0_MUX_E_N_G_MASK   0xC0000000     /* Mux_Emac_NDFC_GPIO */
@@ -1007,27 +1243,18 @@
 #define   SDR0_PFC1_PLB_PME_PLB4_SEL  0x00001000      /* PLB3 Performance Monitor Enable */
 #define   SDR0_PFC1_GFGGI_MASK        0x0000000F    /* GPT Frequency Generation Gated In */
 
-/* Miscealleneaous Function Reg. */
-#define SDR0_MFR                     0x4300
-#define   SDR0_MFR_ETH0_CLK_SEL        0x08000000   /* Ethernet0 Clock Select */
-#define   SDR0_MFR_ETH1_CLK_SEL        0x04000000   /* Ethernet1 Clock Select */
-#define   SDR0_MFR_ZMII_MODE_MASK      0x03000000   /* ZMII Mode Mask */
-#define   SDR0_MFR_ZMII_MODE_MII       0x00000000     /* ZMII Mode MII */
-#define   SDR0_MFR_ZMII_MODE_SMII      0x01000000     /* ZMII Mode SMII */
-#define   SDR0_MFR_ZMII_MODE_RMII_10M  0x02000000     /* ZMII Mode RMII - 10 Mbs */
-#define   SDR0_MFR_ZMII_MODE_RMII_100M 0x03000000     /* ZMII Mode RMII - 100 Mbs */
-#define   SDR0_MFR_ZMII_MODE_BIT0      0x02000000     /* ZMII Mode Bit0 */
-#define   SDR0_MFR_ZMII_MODE_BIT1      0x01000000     /* ZMII Mode Bit1 */
-#define   SDR0_MFR_ZM_ENCODE(n)        ((((unsigned long)(n))&0x3)<<24)
-#define   SDR0_MFR_ZM_DECODE(n)        ((((unsigned long)(n))<<24)&0x3)
-
-#define   SDR0_MFR_ERRATA3_EN0         0x00800000
-#define   SDR0_MFR_ERRATA3_EN1         0x00400000
-#define   SDR0_MFR_PKT_REJ_MASK        0x00300000   /* Pkt Rej. Enable Mask */
-#define   SDR0_MFR_PKT_REJ_EN          0x00300000   /* Pkt Rej. Enable on both EMAC3 0-1 */
-#define   SDR0_MFR_PKT_REJ_EN0         0x00200000   /* Pkt Rej. Enable on EMAC3(0) */
-#define   SDR0_MFR_PKT_REJ_EN1         0x00100000   /* Pkt Rej. Enable on EMAC3(1) */
-#define   SDR0_MFR_PKT_REJ_POL         0x00080000   /* Packet Reject Polarity */
+/*-----------------------------------------------------------------------------
+ | Internal SRAM
+ +----------------------------------------------------------------------------*/
+#define ISRAM0_DCR_BASE 0x380
+#define isram0_sb0cr	(ISRAM0_DCR_BASE+0x00)	/* SRAM bank config 0*/
+#define isram0_bear	(ISRAM0_DCR_BASE+0x04)	/* SRAM bus error addr reg */
+#define isram0_besr0	(ISRAM0_DCR_BASE+0x05)	/* SRAM bus error status reg 0 */
+#define isram0_besr1	(ISRAM0_DCR_BASE+0x06)	/* SRAM bus error status reg 1 */
+#define isram0_pmeg	(ISRAM0_DCR_BASE+0x07)	/* SRAM power management */
+#define isram0_cid	(ISRAM0_DCR_BASE+0x08)	/* SRAM bus core id reg */
+#define isram0_revid	(ISRAM0_DCR_BASE+0x09)	/* SRAM bus revision id reg */
+#define isram0_dpc	(ISRAM0_DCR_BASE+0x0a)	/* SRAM data parity check reg */
 
 #else
 
@@ -1121,7 +1348,7 @@
 #define uic1vr	(UIC1_DCR_BASE+0x7)   /* UIC1 vector			   */
 #define uic1vcr (UIC1_DCR_BASE+0x8)   /* UIC1 vector configuration	   */
 
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 #define UIC2_DCR_BASE 0xe0
 #define uic2sr	(UIC0_DCR_BASE+0x0)   /* UIC2 status-Read Clear		*/
 #define uic2srs	(UIC0_DCR_BASE+0x1)   /* UIC2 status-Read Set */
@@ -1423,6 +1650,46 @@
 #define UIC_EIR6	0x00000004	/* External interrupt 6		    */
 #define UIC_UIC1NC	0x00000002	/* UIC1 non-critical interrupt	    */
 #define UIC_UIC1C	0x00000001	/* UIC1 critical interrupt	    */
+
+#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+
+#define UIC_U0        0x80000000  /* UART 0                             */
+#define UIC_U1        0x40000000  /* UART 1                             */
+#define UIC_IIC0      0x20000000  /* IIC                                */
+#define UIC_KRD       0x10000000  /* Kasumi Ready for data              */
+#define UIC_KDA       0x08000000  /* Kasumi Data Available              */
+#define UIC_PCRW      0x04000000  /* PCI command register write         */
+#define UIC_PPM       0x02000000  /* PCI power management               */
+#define UIC_IIC1      0x01000000  /* IIC                                */
+#define UIC_SPI       0x00800000  /* SPI                                */
+#define UIC_EPCISER   0x00400000  /* External PCI SERR                  */
+#define UIC_MTE       0x00200000  /* MAL TXEOB                          */
+#define UIC_MRE       0x00100000  /* MAL RXEOB                          */
+#define UIC_D0        0x00080000  /* DMA channel 0                      */
+#define UIC_D1        0x00040000  /* DMA channel 1                      */
+#define UIC_D2        0x00020000  /* DMA channel 2                      */
+#define UIC_D3        0x00010000  /* DMA channel 3                      */
+#define UIC_UD0       0x00008000  /* UDMA irq 0                         */
+#define UIC_UD1       0x00004000  /* UDMA irq 1                         */
+#define UIC_UD2       0x00002000  /* UDMA irq 2                         */
+#define UIC_UD3       0x00001000  /* UDMA irq 3                         */
+#define UIC_HSB2D     0x00000800  /* USB2.0 Device                      */
+#define UIC_OHCI1     0x00000400  /* USB2.0 Host OHCI irq 1             */
+#define UIC_OHCI2     0x00000200  /* USB2.0 Host OHCI irq 2             */
+#define UIC_EIP94     0x00000100  /* Security EIP94                     */
+#define UIC_ETH0      0x00000080  /* Emac 0                             */
+#define UIC_ETH1      0x00000040  /* Emac 1                             */
+#define UIC_EHCI      0x00000020  /* USB2.0 Host EHCI                   */
+#define UIC_EIR4      0x00000010  /* External interrupt 4               */
+#define UIC_UIC2NC    0x00000008  /* UIC2 non-critical interrupt        */
+#define UIC_UIC2C     0x00000004  /* UIC2 critical interrupt            */
+#define UIC_UIC1NC    0x00000002  /* UIC1 non-critical interrupt        */
+#define UIC_UIC1C     0x00000001  /* UIC1 critical interrupt            */
+
+/* For compatibility with 405 code */
+#define UIC_MAL_TXEOB	UIC_MTE
+#define UIC_MAL_RXEOB	UIC_MRE
+
 #elif !defined(CONFIG_440SPE)
 #define UIC_U0		0x80000000	/* UART 0			    */
 #define UIC_U1		0x40000000	/* UART 1			    */
@@ -1531,6 +1798,48 @@
 #define UIC_EWU0	0x00000004	/* Ethernet 0 wakeup		    */
 #define UIC_ETH1	0x00000002	/* Ethernet 1			    */
 #define UIC_EWU1	0x00000001	/* Ethernet 1 wakeup		    */
+
+#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+
+#define UIC_MS        0x80000000  /* MAL SERR                           */
+#define UIC_MTDE      0x40000000  /* MAL TXDE                           */
+#define UIC_MRDE      0x20000000  /* MAL RXDE                           */
+#define UIC_U2        0x10000000  /* UART 2                             */
+#define UIC_U3        0x08000000  /* UART 3                             */
+#define UIC_EBCO      0x04000000  /* EBCO interrupt status              */
+#define UIC_NDFC      0x02000000  /* NDFC                               */
+#define UIC_KSLE      0x01000000  /* KASUMI slave error                 */
+#define UIC_CT5       0x00800000  /* GPT compare timer 5                */
+#define UIC_CT6       0x00400000  /* GPT compare timer 6                */
+#define UIC_PLB34I0   0x00200000  /* PLB3X4X MIRQ0                      */
+#define UIC_PLB34I1   0x00100000  /* PLB3X4X MIRQ1                      */
+#define UIC_PLB34I2   0x00080000  /* PLB3X4X MIRQ2                      */
+#define UIC_PLB34I3   0x00040000  /* PLB3X4X MIRQ3                      */
+#define UIC_PLB34I4   0x00020000  /* PLB3X4X MIRQ4                      */
+#define UIC_PLB34I5   0x00010000  /* PLB3X4X MIRQ5                      */
+#define UIC_CT0       0x00008000  /* GPT compare timer 0                */
+#define UIC_CT1       0x00004000  /* GPT compare timer 1                */
+#define UIC_EIR7      0x00002000  /* External interrupt 7               */
+#define UIC_EIR8      0x00001000  /* External interrupt 8               */
+#define UIC_EIR9      0x00000800  /* External interrupt 9               */
+#define UIC_CT2       0x00000400  /* GPT compare timer 2                */
+#define UIC_CT3       0x00000200  /* GPT compare timer 3                */
+#define UIC_CT4       0x00000100  /* GPT compare timer 4                */
+#define UIC_SRE       0x00000080  /* Serial ROM error                   */
+#define UIC_GPTDC     0x00000040  /* GPT decrementer pulse              */
+#define UIC_RSVD0     0x00000020  /* Reserved                           */
+#define UIC_EPCIPER   0x00000010  /* External PCI PERR                  */
+#define UIC_EIR0      0x00000008  /* External interrupt 0               */
+#define UIC_EWU0      0x00000004  /* Ethernet 0 wakeup                  */
+#define UIC_EIR1      0x00000002  /* External interrupt 1               */
+#define UIC_EWU1      0x00000001  /* Ethernet 1 wakeup                  */
+
+/* For compatibility with 405 code */
+#define UIC_MAL_SERR	UIC_MS
+#define UIC_MAL_TXDE	UIC_MTDE
+#define UIC_MAL_RXDE	UIC_MRDE
+#define UIC_ENET	UIC_ETH0
+
 #elif !defined(CONFIG_440SPE)
 #define UIC_MS		0x80000000	/* MAL SERR			    */
 #define UIC_MTDE	0x40000000	/* MAL TXDE			    */
@@ -1608,6 +1917,20 @@
 #define UIC_RSVD29	0x00000004	/* Reserved			    */
 #define UIC_RSVD30	0x00000002	/* Reserved			    */
 #define UIC_RSVD31	0x00000001	/* Reserved			    */
+
+#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* UIC2 */
+
+#define UIC_EIR5    0x80000000  /* External interrupt 5                 */
+#define UIC_EIR6    0x40000000  /* External interrupt 6                 */
+#define UIC_OPB     0x20000000  /* OPB to PLB bridge interrupt stat     */
+#define UIC_EIR2    0x10000000  /* External interrupt 2                 */
+#define UIC_EIR3    0x08000000  /* External interrupt 3                 */
+#define UIC_DDR2    0x04000000  /* DDR2 sdram                           */
+#define UIC_MCTX0   0x02000000  /* MAl intp coalescence TX0             */
+#define UIC_MCTX1   0x01000000  /* MAl intp coalescence TX1             */
+#define UIC_MCTR0   0x00800000  /* MAl intp coalescence TR0             */
+#define UIC_MCTR1   0x00400000  /* MAl intp coalescence TR1             */
+
 #endif	/* CONFIG_440GX */
 
 /*---------------------------------------------------------------------------+
@@ -1623,6 +1946,17 @@
 
 #define UICB0_ALL		(UICB0_UIC0CI | UICB0_UIC0NCI | UICB0_UIC1CI | \
 						 UICB0_UIC1NCI | UICB0_UIC2CI | UICB0_UIC2NCI)
+
+#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+
+#define UICB0_UIC1CI	0x00000000	/* UIC1 Critical Interrupt	    */
+#define UICB0_UIC1NCI	0x00000000	/* UIC1 Noncritical Interrupt	    */
+#define UICB0_UIC2CI	0x00000000	/* UIC2 Critical Interrupt	    */
+#define UICB0_UIC2NCI	0x00000000	/* UIC2 Noncritical Interrupt	    */
+
+#define UICB0_ALL		(UICB0_UIC1CI | UICB0_UIC1NCI | \
+						 UICB0_UIC1CI | UICB0_UIC2NCI)
+
 #endif /* CONFIG_440GX */
 /*---------------------------------------------------------------------------+
 |  Universal interrupt controller interrupts
@@ -2262,7 +2596,8 @@
 #define SDR0_SDSTP1_PAE_MASK		(0x80000000 >> 13)
 #define SDR0_SDSTP1_PISE_MASK		(0x80000000 >> 15)
 #endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 #define SDR0_SDSTP1_PAE_MASK		(0x80000000 >> 21)
 #define SDR0_SDSTP1_PAME_MASK		(0x80000000 >> 27)
 #endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */
@@ -2390,11 +2725,81 @@
 #define SDR0_MFR_ZMII_MODE_BIT1      0x01000000     /* ZMII Mode Bit1 */
 #define SDR0_MFR_ERRATA3_EN0         0x00800000
 #define SDR0_MFR_ERRATA3_EN1         0x00400000
+#if defined(CONFIG_440GX) /* test-only: only 440GX or 440SPE??? */
 #define SDR0_MFR_PKT_REJ_MASK        0x00300000   /* Pkt Rej. Enable Mask */
 #define SDR0_MFR_PKT_REJ_EN          0x00300000   /* Pkt Rej. Enable on both EMAC3 0-1 */
 #define SDR0_MFR_PKT_REJ_EN0         0x00200000   /* Pkt Rej. Enable on EMAC3(0) */
 #define SDR0_MFR_PKT_REJ_EN1         0x00100000   /* Pkt Rej. Enable on EMAC3(1) */
 #define SDR0_MFR_PKT_REJ_POL         0x00080000   /* Packet Reject Polarity      */
+#endif
+
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR0_PFC1_EPS_ENCODE(n)		((((unsigned long)(n))&0x07)<<22)
+#define SDR0_PFC1_EPS_DECODE(n)		((((unsigned long)(n))>>22)&0x07)
+#define SDR0_PFC2_EPS_ENCODE(n)		((((unsigned long)(n))&0x07)<<29)
+#define SDR0_PFC2_EPS_DECODE(n)		((((unsigned long)(n))>>29)&0x07)
+#endif
+
+#define SDR0_MFR_ECS_MASK		0x10000000
+#define SDR0_MFR_ECS_INTERNAL		0x10000000
+
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR0_SRST0        0x200
+#define SDR0_SRST0_BGO          0x80000000 /* PLB to OPB bridge */
+#define SDR0_SRST0_PLB4         0x40000000 /* PLB4 arbiter */
+#define SDR0_SRST0_EBC          0x20000000 /* External bus controller */
+#define SDR0_SRST0_OPB          0x10000000 /* OPB arbiter */
+#define SDR0_SRST0_UART0        0x08000000 /* Universal asynchronous receiver/transmitter 0 */
+#define SDR0_SRST0_UART1        0x04000000 /* Universal asynchronous receiver/transmitter 1 */
+#define SDR0_SRST0_IIC0         0x02000000 /* Inter integrated circuit 0 */
+#define SDR0_SRST0_USB2H        0x01000000 /* USB2.0 Host */
+#define SDR0_SRST0_GPIO         0x00800000 /* General purpose I/O */
+#define SDR0_SRST0_GPT          0x00400000 /* General purpose timer */
+#define SDR0_SRST0_DMC          0x00200000 /* DDR SDRAM memory controller */
+#define SDR0_SRST0_PCI          0x00100000 /* PCI */
+#define SDR0_SRST0_EMAC0        0x00080000 /* Ethernet media access controller 0 */
+#define SDR0_SRST0_EMAC1        0x00040000 /* Ethernet media access controller 1 */
+#define SDR0_SRST0_CPM0         0x00020000 /* Clock and power management */
+#define SDR0_SRST0_ZMII         0x00010000 /* ZMII bridge */
+#define SDR0_SRST0_UIC0         0x00008000 /* Universal interrupt controller 0 */
+#define SDR0_SRST0_UIC1         0x00004000 /* Universal interrupt controller 1 */
+#define SDR0_SRST0_IIC1         0x00002000 /* Inter integrated circuit 1 */
+#define SDR0_SRST0_SCP          0x00001000 /* Serial communications port */
+#define SDR0_SRST0_BGI          0x00000800 /* OPB to PLB bridge */
+#define SDR0_SRST0_DMA          0x00000400 /* Direct memory access controller */
+#define SDR0_SRST0_DMAC         0x00000200 /* DMA channel */
+#define SDR0_SRST0_MAL          0x00000100 /* Media access layer */
+#define SDR0_SRST0_USB2D        0x00000080 /* USB2.0 device */
+#define SDR0_SRST0_GPTR         0x00000040 /* General purpose timer */
+#define SDR0_SRST0_P4P3         0x00000010 /* PLB4 to PLB3 bridge */
+#define SDR0_SRST0_P3P4         0x00000008 /* PLB3 to PLB4 bridge */
+#define SDR0_SRST0_PLB3         0x00000004 /* PLB3 arbiter */
+#define SDR0_SRST0_UART2        0x00000002 /* Universal asynchronous receiver/transmitter 2 */
+#define SDR0_SRST0_UART3        0x00000001 /* Universal asynchronous receiver/transmitter 3 */
+
+#define SDR0_SRST1        0x201
+#define SDR0_SRST1_NDFC         0x80000000 /* Nand flash controller */
+#define SDR0_SRST1_OPBA1        0x40000000 /* OPB Arbiter attached to PLB4 */
+#define SDR0_SRST1_P4OPB0       0x20000000 /* PLB4 to OPB Bridge0 */
+#define SDR0_SRST1_PLB42OPB0    SDR0_SRST1_P4OPB0
+#define SDR0_SRST1_DMA4         0x10000000 /* DMA to PLB4 */
+#define SDR0_SRST1_DMA4CH       0x08000000 /* DMA Channel to PLB4 */
+#define SDR0_SRST1_OPBA2        0x04000000 /* OPB Arbiter attached to PLB4 USB 2.0 Host */
+#define SDR0_SRST1_OPB2PLB40    0x02000000 /* OPB to PLB4 Bridge attached to USB 2.0 Host */
+#define SDR0_SRST1_PLB42OPB1    0x01000000 /* PLB4 to OPB Bridge attached to USB 2.0 Host */
+#define SDR0_SRST1_CPM1         0x00800000 /* Clock and Power management 1 */
+#define SDR0_SRST1_UIC2         0x00400000 /* Universal Interrupt Controller 2 */
+#define SDR0_SRST1_CRYP0        0x00200000 /* Security Engine */
+#define SDR0_SRST1_USB20PHY     0x00100000 /* USB 2.0 Phy */
+#define SDR0_SRST1_USB2HUTMI    0x00080000 /* USB 2.0 Host UTMI Interface */
+#define SDR0_SRST1_USB2HPHY     0x00040000 /* USB 2.0 Host Phy Interface */
+#define SDR0_SRST1_SRAM0        0x00020000 /* Internal SRAM Controller */
+#define SDR0_SRST1_RGMII0       0x00010000 /* RGMII Bridge */
+#define SDR0_SRST1_ETHPLL       0x00008000 /* Ethernet PLL */
+#define SDR0_SRST1_FPU          0x00004000 /* Floating Point Unit */
+#define SDR0_SRST1_KASU0        0x00002000 /* Kasumi Engine */
+
+#else
 
 #define SDR0_SRST_BGO			0x80000000
 #define SDR0_SRST_PLB			0x40000000
@@ -2427,10 +2832,15 @@
 #define SDR0_SRST_EMAC3			0x00000008
 #define SDR0_SRST_RGMII			0x00000001
 
+#endif
+
 /*-----------------------------------------------------------------------------+
 |  Clocking
 +-----------------------------------------------------------------------------*/
-#if !defined (CONFIG_440GX) && !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
+#if !defined (CONFIG_440GX) && \
+    !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && \
+    !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \
+    !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
 #define PLLSYS0_TUNE_MASK	0xffc00000	/* PLL TUNE bits	    */
 #define PLLSYS0_FB_DIV_MASK	0x003c0000	/* Feedback divisor	    */
 #define PLLSYS0_FWD_DIV_A_MASK	0x00038000	/* Forward divisor A	    */
@@ -2498,6 +2908,120 @@
 #define PLLSYS1_NTO1_MASK	0x00000001	/* CPU:PLB N-to-1 ratio */
 #endif /* CONFIG_440GX */
 
+#if defined (CONFIG_440EPX) || defined (CONFIG_440GRX)
+/*--------------------------------------*/
+#define CPR0_PLLC                   0x40
+#define   CPR0_PLLC_RST_MASK           0x80000000
+#define   CPR0_PLLC_RST_PLLLOCKED      0x00000000
+#define   CPR0_PLLC_RST_PLLRESET       0x80000000
+#define   CPR0_PLLC_ENG_MASK           0x40000000
+#define   CPR0_PLLC_ENG_DISABLE        0x00000000
+#define   CPR0_PLLC_ENG_ENABLE         0x40000000
+#define   CPR0_PLLC_ENG_ENCODE(n)      ((((unsigned long)(n))&0x01)<<30)
+#define   CPR0_PLLC_ENG_DECODE(n)      ((((unsigned long)(n))>>30)&0x01)
+#define   CPR0_PLLC_SRC_MASK           0x20000000
+#define   CPR0_PLLC_SRC_PLLOUTA        0x00000000
+#define   CPR0_PLLC_SRC_PLLOUTB        0x20000000
+#define   CPR0_PLLC_SRC_ENCODE(n)      ((((unsigned long)(n))&0x01)<<29)
+#define   CPR0_PLLC_SRC_DECODE(n)      ((((unsigned long)(n))>>29)&0x01)
+#define   CPR0_PLLC_SEL_MASK           0x07000000
+#define   CPR0_PLLC_SEL_PLL            0x00000000
+#define   CPR0_PLLC_SEL_CPU            0x01000000
+#define   CPR0_PLLC_SEL_PER            0x05000000
+#define   CPR0_PLLC_SEL_ENCODE(n)      ((((unsigned long)(n))&0x07)<<24)
+#define   CPR0_PLLC_SEL_DECODE(n)      ((((unsigned long)(n))>>24)&0x07)
+#define   CPR0_PLLC_TUNE_MASK          0x000003FF
+#define   CPR0_PLLC_TUNE_ENCODE(n)     ((((unsigned long)(n))&0x3FF)<<0)
+#define   CPR0_PLLC_TUNE_DECODE(n)     ((((unsigned long)(n))>>0)&0x3FF)
+/*--------------------------------------*/
+#define CPR0_PLLD                   0x60
+#define   CPR0_PLLD_FBDV_MASK          0x1F000000
+#define   CPR0_PLLD_FBDV_ENCODE(n)     ((((unsigned long)(n))&0x1F)<<24)
+#define   CPR0_PLLD_FBDV_DECODE(n)     ((((((unsigned long)(n))>>24)-1)&0x1F)+1)
+#define   CPR0_PLLD_FWDVA_MASK         0x000F0000
+#define   CPR0_PLLD_FWDVA_ENCODE(n)    ((((unsigned long)(n))&0x0F)<<16)
+#define   CPR0_PLLD_FWDVA_DECODE(n)    ((((((unsigned long)(n))>>16)-1)&0x0F)+1)
+#define   CPR0_PLLD_FWDVB_MASK         0x00000700
+#define   CPR0_PLLD_FWDVB_ENCODE(n)    ((((unsigned long)(n))&0x07)<<8)
+#define   CPR0_PLLD_FWDVB_DECODE(n)    ((((((unsigned long)(n))>>8)-1)&0x07)+1)
+#define   CPR0_PLLD_LFBDV_MASK         0x0000003F
+#define   CPR0_PLLD_LFBDV_ENCODE(n)    ((((unsigned long)(n))&0x3F)<<0)
+#define   CPR0_PLLD_LFBDV_DECODE(n)    ((((((unsigned long)(n))>>0)-1)&0x3F)+1)
+/*--------------------------------------*/
+#define CPR0_PRIMAD                 0x80
+#define   CPR0_PRIMAD_PRADV0_MASK      0x07000000
+#define   CPR0_PRIMAD_PRADV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
+#define   CPR0_PRIMAD_PRADV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
+/*--------------------------------------*/
+#define CPR0_PRIMBD                 0xA0
+#define   CPR0_PRIMBD_PRBDV0_MASK      0x07000000
+#define   CPR0_PRIMBD_PRBDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
+#define   CPR0_PRIMBD_PRBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
+/*--------------------------------------*/
+#if 0
+#define CPR0_CPM0_ER                0xB0    /* CPM Enable Register */
+#define CPR0_CPM0_FR                0xB1    /* CPM Force Register */
+#define CPR0_CPM0_SR                0xB2    /* CPM Status Register */
+#define CPR0_CPM0_IIC0               0x80000000    /* Inter-Intergrated Circuit0 */
+#define CPR0_CPM0_IIC1               0x40000000    /* Inter-Intergrated Circuit1 */
+#define CPR0_CPM0_PCI                0x20000000    /* Peripheral Component Interconnect */
+#define CPR0_CPM0_USB1H              0x08000000    /* USB1.1 Host */
+#define CPR0_CPM0_FPU                0x04000000    /* PPC440 FPU */
+#define CPR0_CPM0_CPU                0x02000000    /* PPC440x5 Processor Core */
+#define CPR0_CPM0_DMA                0x01000000    /* Direct Memory Access Controller */
+#define CPR0_CPM0_BGO                0x00800000    /* PLB to OPB Bridge */
+#define CPR0_CPM0_BGI                0x00400000    /* OPB to PLB Bridge */
+#define CPR0_CPM0_EBC                0x00200000    /* External Bus Controller */
+#define CPR0_CPM0_NDFC               0x00100000    /* Nand Flash Controller */
+#define CPR0_CPM0_MADMAL             0x00080000    /* DDR SDRAM Controller or MADMAL ??? */
+#define CPR0_CPM0_DMC                0x00080000    /* DDR SDRAM Controller or MADMAL ??? */
+#define CPR0_CPM0_PLB4               0x00040000    /* PLB4 Arbiter */
+#define CPR0_CPM0_PLB4x3x            0x00020000    /* PLB4 to PLB3 */
+#define CPR0_CPM0_PLB3x4x            0x00010000    /* PLB3 to PLB4 */
+#define CPR0_CPM0_PLB3               0x00008000    /* PLB3 Arbiter */
+#define CPR0_CPM0_PPM                0x00002000    /* PLB Performance Monitor */
+#define CPR0_CPM0_UIC1               0x00001000    /* Universal Interrupt Controller 1 */
+#define CPR0_CPM0_GPIO               0x00000800    /* General Purpose IO */
+#define CPR0_CPM0_GPT                0x00000400    /* General Purpose Timer */
+#define CPR0_CPM0_UART0              0x00000200    /* Universal Asynchronous Rcver/Xmitter 0 */
+#define CPR0_CPM0_UART1              0x00000100    /* Universal Asynchronous Rcver/Xmitter 1 */
+#define CPR0_CPM0_UIC0               0x00000080    /* Universal Interrupt Controller 0 */
+#define CPR0_CPM0_TMRCLK             0x00000040    /* CPU Timer */
+#define CPR0_CPM0_EMC0               0x00000020    /* Ethernet 0 */
+#define CPR0_CPM0_EMC1               0x00000010    /* Ethernet 1 */
+#define CPR0_CPM0_UART2              0x00000008    /* Universal Asynchronous Rcver/Xmitter 2 */
+#define CPR0_CPM0_UART3              0x00000004    /* Universal Asynchronous Rcver/Xmitter 3 */
+#define CPR0_CPM0_USB2D              0x00000002    /* USB2.0 Device */
+#define CPR0_CPM0_USB2H              0x00000001    /* USB2.0 Host */
+#endif
+/*--------------------------------------*/
+#define CPR0_OPBD                   0xC0
+#define   CPR0_OPBD_OPBDV0_MASK        0x03000000
+#define   CPR0_OPBD_OPBDV0_ENCODE(n)   ((((unsigned long)(n))&0x03)<<24)
+#define   CPR0_OPBD_OPBDV0_DECODE(n)   ((((((unsigned long)(n))>>24)-1)&0x03)+1)
+/*--------------------------------------*/
+#define CPR0_PERD                   0xE0
+#define   CPR0_PERD_PERDV0_MASK        0x07000000
+#define   CPR0_PERD_PERDV0_ENCODE(n)   ((((unsigned long)(n))&0x07)<<24)
+#define   CPR0_PERD_PERDV0_DECODE(n)   ((((((unsigned long)(n))>>24)-1)&0x07)+1)
+/*--------------------------------------*/
+#define CPR0_MALD                  0x100
+#define   CPR0_MALD_MALDV0_MASK        0x03000000
+#define   CPR0_MALD_MALDV0_ENCODE(n)   ((((unsigned long)(n))&0x03)<<24)
+#define   CPR0_MALD_MALDV0_DECODE(n)   ((((((unsigned long)(n))>>24)-1)&0x03)+1)
+/*--------------------------------------*/
+#define CPR0_SPCID                 0x120
+#define   CPR0_SPCID_SPCIDV0_MASK      0x03000000
+#define   CPR0_SPCID_SPCIDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
+#define   CPR0_SPCID_SPCIDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
+/*--------------------------------------*/
+#define CPR0_ICFG                  0x140
+#define   CPR0_ICFG_RLI_MASK           0x80000000
+#define   CPR0_ICFG_RLI_RESETCPR       0x00000000
+#define   CPR0_ICFG_RLI_PRESERVECPR    0x80000000
+#define   CPR0_ICFG_ICS_MASK           0x00000007
+#endif /* defined (CONFIG_440EPX) || defined (CONFIG_440GRX) */
+
 /*-----------------------------------------------------------------------------
 | IIC Register Offsets
 '----------------------------------------------------------------------------*/
@@ -2539,7 +3063,8 @@
 #define PCIX0_CFGBASE		(CFG_PCI_BASE + 0x0ec80000)
 #define PCIX0_IOBASE		(CFG_PCI_BASE + 0x08000000)
 
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 
 /* PCI Local Configuration Registers
    --------------------------------- */
@@ -2625,6 +3150,33 @@
 
 #endif /* !defined(CONFIG_440EP) !defined(CONFIG_440GR) */
 
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+
+/* USB2.0 Device */
+#define USB2D0_BASE         CFG_USB2D0_BASE
+
+#define USB2D0_INTRIN       (USB2D0_BASE + 0x00000000)
+
+#define USB2D0_INTRIN       (USB2D0_BASE + 0x00000000) /* Interrupt register for Endpoint 0 plus IN Endpoints 1 to 3 */
+#define USB2D0_POWER        (USB2D0_BASE + 0x00000000) /* Power management register */
+#define USB2D0_FADDR        (USB2D0_BASE + 0x00000000) /* Function address register */
+#define USB2D0_INTRINE      (USB2D0_BASE + 0x00000000) /* Interrupt enable register for USB2D0_INTRIN */
+#define USB2D0_INTROUT      (USB2D0_BASE + 0x00000000) /* Interrupt register for OUT Endpoints 1 to 3 */
+#define USB2D0_INTRUSBE     (USB2D0_BASE + 0x00000000) /* Interrupt enable register for USB2D0_INTRUSB */
+#define USB2D0_INTRUSB      (USB2D0_BASE + 0x00000000) /* Interrupt register for common USB interrupts */
+#define USB2D0_INTROUTE     (USB2D0_BASE + 0x00000000) /* Interrupt enable register for IntrOut */
+#define USB2D0_TSTMODE      (USB2D0_BASE + 0x00000000) /* Enables the USB 2.0 test modes */
+#define USB2D0_INDEX        (USB2D0_BASE + 0x00000000) /* Index register for selecting the Endpoint status/control registers */
+#define USB2D0_FRAME        (USB2D0_BASE + 0x00000000) /* Frame number */
+#define USB2D0_INCSR0       (USB2D0_BASE + 0x00000000) /* Control Status register for Endpoint 0. (Index register set to select Endpoint 0) */
+#define USB2D0_INCSR        (USB2D0_BASE + 0x00000000) /* Control Status register for IN Endpoint. (Index register set to select Endpoints 13) */
+#define USB2D0_INMAXP       (USB2D0_BASE + 0x00000000) /* Maximum packet size for IN Endpoint. (Index register set to select Endpoints 13) */
+#define USB2D0_OUTCSR       (USB2D0_BASE + 0x00000000) /* Control Status register for OUT Endpoint. (Index register set to select Endpoints 13) */
+#define USB2D0_OUTMAXP      (USB2D0_BASE + 0x00000000) /* Maximum packet size for OUT Endpoint. (Index register set to select Endpoints 13) */
+#define USB2D0_OUTCOUNT0    (USB2D0_BASE + 0x00000000) /* Number of received bytes in Endpoint 0 FIFO. (Index register set to select Endpoint 0) */
+#define USB2D0_OUTCOUNT     (USB2D0_BASE + 0x00000000) /* Number of bytes in OUT Endpoint FIFO. (Index register set to select Endpoints 13) */
+#endif
+
 /******************************************************************************
  * GPIO macro register defines
  ******************************************************************************/
@@ -2640,7 +3192,8 @@
 #define GPIO0_IR               (GPIO0_BASE+0x1C)
 #endif /* CONFIG_440GP */
 
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 #define GPIO0_BASE             (CFG_PERIPHERAL_BASE+0x00000B00)
 #define GPIO1_BASE             (CFG_PERIPHERAL_BASE+0x00000C00)
 
diff --git a/include/ppc4xx_enet.h b/include/ppc4xx_enet.h
index ec2e362..43c5ca4 100644
--- a/include/ppc4xx_enet.h
+++ b/include/ppc4xx_enet.h
@@ -145,12 +145,14 @@ typedef struct emac_4xx_hw_st {
 #define EMAC_STACR_OC_MASK	(0x00000000)
 #endif
 
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 #define SDR0_PFC1_EM_1000	(0x00200000)
 #endif
 
 /*ZMII Bridge Register addresses */
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 #define ZMII_BASE			(CFG_PERIPHERAL_BASE + 0x0D00)
 #else
 #define ZMII_BASE			(CFG_PERIPHERAL_BASE + 0x0780)
@@ -163,6 +165,7 @@ typedef struct emac_4xx_hw_st {
 #define ZMII_MDI0			0x80000000
 
 /* ZMII FER Register Bit Definitions */
+#define ZMII_FER_DIS		(0x0)
 #define ZMII_FER_MDI		(0x8)
 #define ZMII_FER_SMII		(0x4)
 #define ZMII_FER_RMII		(0x2)
@@ -197,7 +200,11 @@ typedef struct emac_4xx_hw_st {
 #define ZMII_SMIISR_V(__x)	((3 - __x) * 8)
 
 /* RGMII Register Addresses */
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define RGMII_BASE		(CFG_PERIPHERAL_BASE + 0x1000)
+#else
 #define RGMII_BASE		(CFG_PERIPHERAL_BASE + 0x0790)
+#endif
 #define RGMII_FER		(RGMII_BASE + 0x00)
 #define RGMII_SSR		(RGMII_BASE + 0x04)
 
@@ -216,7 +223,11 @@ typedef struct emac_4xx_hw_st {
 #define RGMII_SSR_SP_100MBPS	(0x02)
 #define RGMII_SSR_SP_1000MBPS	(0x04)
 
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define RGMII_SSR_V(__x)	((__x) * 8)
+#else
 #define RGMII_SSR_V(__x)	((__x -2) * 8)
+#endif
 
 
 /*---------------------------------------------------------------------------+
@@ -286,7 +297,8 @@ typedef struct emac_4xx_hw_st {
 
 /* Ethernet MAC Regsiter Addresses */
 #if defined(CONFIG_440)
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 #define EMAC_BASE			    (CFG_PERIPHERAL_BASE + 0x0E00)
 #else
 #define EMAC_BASE			    (CFG_PERIPHERAL_BASE + 0x0800)
@@ -332,7 +344,9 @@ typedef struct emac_4xx_hw_st {
 #define EMAC_M0_WKE			    (0x04000000)
 
 /* on 440GX EMAC_MR1 has a different layout! */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 /* MODE Reg 1 */
 #define EMAC_M1_FDE		(0x80000000)
 #define EMAC_M1_ILE		(0x40000000)
diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl
index 72d690e..3e47e82 100644
--- a/include/ppc_asm.tmpl
+++ b/include/ppc_asm.tmpl
@@ -312,7 +312,7 @@ label:                                                  \
 	lwz     r3,GOT(transfer_to_handler);            \
 	mtlr    r3;                                     \
 	addi    r3,r1,STACK_FRAME_OVERHEAD;             \
-	li      r20,MSR_KERNEL;                         \
+	li      r20,(MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)); \
 	rlwimi  r20,r23,0,25,25;                        \
 	blrl    ;                                       \
 .L_ ## label :                                          \
diff --git a/include/serial.h b/include/serial.h
index 8c7b1c2..4880059 100644
--- a/include/serial.h
+++ b/include/serial.h
@@ -26,6 +26,13 @@ extern struct serial_device * default_serial_console (void);
    || defined(CONFIG_405EP) || defined(CONFIG_MPC5xxx)
 extern struct serial_device serial0_device;
 extern struct serial_device serial1_device;
+#if defined(CFG_NS16550_SERIAL)
+extern struct serial_device eserial1_device;
+extern struct serial_device eserial2_device;
+extern struct serial_device eserial3_device;
+extern struct serial_device eserial4_device;
+#endif /* CFG_NS16550_SERIAL */
+
 #endif