MLK-14390-3 mx6sllarm2: Convert to enable OF_CONTROL and DM drivers

Update mx6sll lpddr2/3 arm2 board codes and build configurations
to enable OF_CONTROL and DM drivers.

1. Update GPIO codes for adding gpio request
2. Enable USB DM driver
3. Update PMIC code for using DM PMIC
4. Add spinor boot support, pin conflict with LCD, will disable LCD.

Signed-off-by: Ye Li <ye.li@nxp.com>

1 files changed, 11 insertions, 43 deletions

diff --git a/include/configs/mx6sll_arm2.h b/include/configs/mx6sll_arm2.h
index 9c5df2d..b25e7ed 100644
--- a/include/configs/mx6sll_arm2.h
+++ b/include/configs/mx6sll_arm2.h
@@ -11,26 +11,10 @@
 
 #include "mx6_common.h"
 
-#undef CONFIG_CMD_SET
-
-/* uncomment for PLUGIN mode support */
-/* #define CONFIG_USE_PLUGIN */
-
-/* uncomment for SECURE mode support */
-/* #define CONFIG_SECURE_BOOT */
-
-#ifdef CONFIG_SECURE_BOOT
-#ifndef CONFIG_CSF_SIZE
-#define CONFIG_CSF_SIZE 0x4000
-#endif
-#endif
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(16 * SZ_1M)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART1_BASE
 
@@ -40,19 +24,24 @@
 #define CONFIG_SYS_MMC_ENV_DEV		0   /* USDHC1 */
 
 /* I2C Configs */
-#define CONFIG_CMD_I2C
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
+#endif
+#ifdef CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED		  100000
+#endif
 
 /* PMIC */
+#ifndef CONFIG_DM_PMIC
 #define CONFIG_POWER
 #define CONFIG_POWER_I2C
 #define CONFIG_POWER_PFUZE100
 #define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
+#endif
 
 #define CONFIG_MFG_ENV_SETTINGS \
 	"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
@@ -74,7 +63,7 @@
 	"console=ttymxc0\0" \
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
-	"fdt_file=imx6sll-lpddr3-arm2.dtb\0" \
+	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 	"fdt_addr=0x83000000\0" \
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
@@ -145,7 +134,6 @@
 	   "else run netboot; fi"
 
 /* Miscellaneous configurable options */
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + SZ_128M)
 
@@ -174,18 +162,16 @@
 #define CONFIG_SYS_MMC_ENV_PART		0   /* user partition */
 #define CONFIG_MMCROOT			"/dev/mmcblk0p2"  /* USDHC1 */
 
-#ifdef CONFIG_SYS_BOOT_SPINOR
-#define CONFIG_SYS_USE_SPINOR
+#ifdef CONFIG_SPI_BOOT
 #define CONFIG_ENV_IS_IN_SPI_FLASH
 #else
 #define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_VIDEO
 #endif
 
 #if defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_ENV_OFFSET		(12 * SZ_64K)
+#define CONFIG_ENV_OFFSET		(13 * SZ_64K)
 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
-#define CONFIG_ENV_OFFSET		(768 * 1024)
+#define CONFIG_ENV_OFFSET		(864 * 1024)
 #define CONFIG_ENV_SECT_SIZE		(64 * 1024)
 #define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
 #define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
@@ -193,33 +179,19 @@
 #define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
 #endif
 
-/* Network */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-
 /* USB Configs */
-#define CONFIG_CMD_USB
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
 #define CONFIG_USB_ETHER_RTL8152
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS		0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 #endif
 
 #define CONFIG_IMX_THERMAL
 
 #define CONFIG_IOMUX_LPSR
 
-#ifdef CONFIG_SYS_USE_SPINOR
-#define CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
+#ifdef CONFIG_CMD_SF
 #define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_BUS  0
 #define CONFIG_SF_DEFAULT_SPEED 20000000
@@ -228,12 +200,8 @@
 #endif
 
 #ifdef CONFIG_VIDEO
-#define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_MXS
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_CMD_BMP