diff options
| author | Ye Li <ye.li@nxp.com> | 2017-03-08 00:42:44 +0800 |
|---|---|---|
| committer | Ye Li <ye.li@nxp.com> | 2017-04-05 14:06:24 +0800 |
| commit | b224cafc1c2eed90afc05e61d00366e56c1a8b5d (patch) | |
| tree | 950d001e3caf2c5a07bf68ada5f74d7e9e2607db /include | |
| parent | 0f59c047c6f8dcecf22ce999b01f6ffc00d26e6b (diff) | |
| download | u-boot-imx-b224cafc1c2eed90afc05e61d00366e56c1a8b5d.zip u-boot-imx-b224cafc1c2eed90afc05e61d00366e56c1a8b5d.tar.gz u-boot-imx-b224cafc1c2eed90afc05e61d00366e56c1a8b5d.tar.bz2 | |
MLK-14326-14 mx6ulevk: Enable OF_CONTROL and DM drivers
Update mx6ulevk board files and build configurations to enable
OF_CONTROL and DM drivers.
1. QSPI settings and codes update for using DM QSPI driver.
For DM and non-DM driver, the AMBA address is not same.
2. Update configurations for DM i2c driver, using CONFIG_SYS_I2C for non-DM driver
3. GPIO update for adding gpio_request
4. Add FEC DM driver support for two FEC controllers.
5. Enable USB DM driver.
6. Enable 74X164 DM driver for 74LV controlling.
7. Enable PMIC DM driver for 9x9 EVK
Signed-off-by: Ye Li <ye.li@nxp.com>
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/mx6ul_14x14_evk.h | 25 |
1 files changed, 12 insertions, 13 deletions
diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h index db067bb..1a049fa 100644 --- a/include/configs/mx6ul_14x14_evk.h +++ b/include/configs/mx6ul_14x14_evk.h @@ -54,11 +54,15 @@ /* I2C configs */ #ifdef CONFIG_CMD_I2C -#define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_SPEED 100000 +#endif + +/* Only use DM I2C driver for 14x14 EVK. Because the PFUZE3000 driver does not support DM */ +#ifndef CONFIG_DM_I2C +#define CONFIG_SYS_I2C /* PMIC only for 9X9 EVK */ #define CONFIG_POWER @@ -219,13 +223,11 @@ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #ifdef CONFIG_QSPI_BOOT -#define CONFIG_FSL_QSPI #define CONFIG_ENV_IS_IN_SPI_FLASH #elif defined CONFIG_NAND_BOOT #define CONFIG_CMD_NAND #define CONFIG_ENV_IS_IN_NAND #else -#define CONFIG_FSL_QSPI #define CONFIG_ENV_IS_IN_MMC #endif @@ -235,10 +237,10 @@ #define CONFIG_CMD_BMODE -#ifndef CONFIG_SYS_DCACHE_OFF -#endif +#define CONFIG_SOFT_SPI #ifdef CONFIG_FSL_QSPI +#define CONFIG_SYS_FSL_QSPI_AHB #define CONFIG_SF_DEFAULT_BUS 0 #define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 40000000 @@ -280,20 +282,15 @@ #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE #endif - /* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #endif #ifdef CONFIG_CMD_NET +#define CONFIG_CMD_MII #define CONFIG_FEC_MXC #define CONFIG_MII #define CONFIG_FEC_ENET_DEV 1 @@ -302,15 +299,17 @@ #define IMX_FEC_BASE ENET_BASE_ADDR #define CONFIG_FEC_MXC_PHYADDR 0x2 #define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_ETHPRIME "FEC0" #elif (CONFIG_FEC_ENET_DEV == 1) #define IMX_FEC_BASE ENET2_BASE_ADDR #define CONFIG_FEC_MXC_PHYADDR 0x1 #define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_ETHPRIME "FEC1" #endif -#define CONFIG_ETHPRIME "FEC" #define CONFIG_PHYLIB #define CONFIG_PHY_MICREL +#define CONFIG_FEC_MXC_MDIO_BASE ENET2_BASE_ADDR #endif #define CONFIG_IMX_THERMAL |