summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorEd Swarthout <Ed.Swarthout@freescale.com>2007-07-27 01:50:51 -0500
committerAndrew Fleming-AFLEMING <afleming@freescale.com>2007-08-14 01:38:40 -0500
commit837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962 (patch)
treeafb8a02fe74416106236caa33265e4958c453c5a /include
parent61a21e980a7b9188424d04f1c265fdc5c21c7e85 (diff)
downloadu-boot-imx-837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962.zip
u-boot-imx-837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962.tar.gz
u-boot-imx-837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962.tar.bz2
8544ds PCIE support
PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address. Enable LBC and ECM errors and clear error registers. Add tftpflash env var to get uboot from tftp server and flash it. Add pci/pcie convenience env vars to display register space: "run pcie3regs" to see all pcie3 ccsr registers "run pcie3cfg" to see all cfg registers Whitespace cleanup and MPC8544DS.h Enable CONFIG_INTERRUPTS. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com>
Diffstat (limited to 'include')
-rw-r--r--include/asm-ppc/immap_85xx.h37
-rw-r--r--include/configs/MPC8544DS.h135
2 files changed, 115 insertions, 57 deletions
diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h
index e002d28..77f885d 100644
--- a/include/asm-ppc/immap_85xx.h
+++ b/include/asm-ppc/immap_85xx.h
@@ -1,6 +1,8 @@
/*
* MPC85xx Internal Memory Map
*
+ * Copyright 2007 Freescale Semiconductor.
+ *
* Copyright(c) 2002,2003 Motorola Inc.
* Xianghua Xiao (x.xiao@motorola.com)
*
@@ -1526,8 +1528,22 @@ typedef struct ccsr_rio {
typedef struct ccsr_gur {
uint porpllsr; /* 0xe0000 - POR PLL ratio status register */
uint porbmsr; /* 0xe0004 - POR boot mode status register */
+#define MPC85xx_PORBMSR_HA 0x00070000
uint porimpscr; /* 0xe0008 - POR I/O impedance status and control register */
uint pordevsr; /* 0xe000c - POR I/O device status regsiter */
+#define MPC85xx_PORDEVSR_SGMII1_DIS 0x20000000
+#define MPC85xx_PORDEVSR_SGMII2_DIS 0x10000000
+#define MPC85xx_PORDEVSR_SGMII3_DIS 0x08000000
+#define MPC85xx_PORDEVSR_SGMII4_DIS 0x04000000
+#define MPC85xx_PORDEVSR_IO_SEL 0x00380000
+#define MPC85xx_PORDEVSR_PCI2_ARB 0x00040000
+#define MPC85xx_PORDEVSR_PCI1_ARB 0x00020000
+#define MPC85xx_PORDEVSR_PCI1_PCI32 0x00010000
+#define MPC85xx_PORDEVSR_PCI1_SPD 0x00008000
+#define MPC85xx_PORDEVSR_PCI2_SPD 0x00004000
+#define MPC85xx_PORDEVSR_DRAM_RTYPE 0x00000060
+#define MPC85xx_PORDEVSR_RIO_CTLS 0x00000008
+#define MPC85xx_PORDEVSR_RIO_DEV_ID 0x00000007
uint pordbgmsr; /* 0xe0010 - POR debug mode status register */
char res1[12];
uint gpporcr; /* 0xe0020 - General-purpose POR configuration register */
@@ -1541,6 +1557,25 @@ typedef struct ccsr_gur {
uint pmuxcr; /* 0xe0060 - Alternate function signal multiplex control */
char res6[12];
uint devdisr; /* 0xe0070 - Device disable control */
+#define MPC85xx_DEVDISR_PCI1 0x80000000
+#define MPC85xx_DEVDISR_PCI2 0x40000000
+#define MPC85xx_DEVDISR_PCIE 0x20000000
+#define MPC85xx_DEVDISR_LBC 0x08000000
+#define MPC85xx_DEVDISR_PCIE2 0x04000000
+#define MPC85xx_DEVDISR_PCIE3 0x02000000
+#define MPC85xx_DEVDISR_SEC 0x01000000
+#define MPC85xx_DEVDISR_SRIO 0x00080000
+#define MPC85xx_DEVDISR_RMSG 0x00040000
+#define MPC85xx_DEVDISR_DDR 0x00010000
+#define MPC85xx_DEVDISR_CPU 0x00008000
+#define MPC85xx_DEVDISR_TB 0x00004000
+#define MPC85xx_DEVDISR_DMA 0x00000400
+#define MPC85xx_DEVDISR_TSEC1 0x00000080
+#define MPC85xx_DEVDISR_TSEC2 0x00000040
+#define MPC85xx_DEVDISR_TSEC3 0x00000020
+#define MPC85xx_DEVDISR_TSEC4 0x00000010
+#define MPC85xx_DEVDISR_I2C 0x00000004
+#define MPC85xx_DEVDISR_DUART 0x00000002
char res7[12];
uint powmgtcsr; /* 0xe0080 - Power management status and control register */
char res8[12];
@@ -1562,7 +1597,7 @@ typedef struct ccsr_gur {
uint ddrioovcr; /* 0xe0f24 - DDR IO Override Control */
uint res14; /* 0xe0f28 */
uint tsec34ioovcr; /* 0xe0f2c - eTSEC 3/4 IO override control */
- char res15[61651];
+ char res15[61648]; /* 0xe0f30 to 0xefffff */
} ccsr_gur_t;
#define PORDEVSR_PCI (0x00800000) /* PCI Mode */
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index d0f94a3..32934e1 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -34,14 +34,14 @@
#define CONFIG_MPC8544 1
#define CONFIG_MPC8544DS 1
-#undef CONFIG_PCI /* Enable PCI/PCIE */
-#undef CONFIG_PCI1 /* PCI controller 1 */
-#undef CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
-#undef CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */
-#undef CONFIG_PCIE3 /* PCIE controler 3 (ULI bridge) */
-#undef CONFIG_FSL_PCI_INIT /* Use common FSL init code */
-
-#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_PCI 1 /* Enable PCI/PCIE */
+#define CONFIG_PCI1 1 /* PCI controller 1 */
+#define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */
+#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */
+#define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */
+#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
#undef CONFIG_DDR_DLL
@@ -52,6 +52,7 @@
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
#define CONFIG_DDR_ECC_CMD
+#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
/*
* When initializing flash, if we cannot find the manufacturer ID,
@@ -70,7 +71,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
/*
* These can be toggled for performance analysis, otherwise use default.
*/
-#define CONFIG_L2_CACHE /* toggle L2 cache */
+#define CONFIG_L2_CACHE /* toggle L2 cache */
#define CONFIG_BTB /* toggle branch predition */
#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
#define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */
@@ -86,13 +87,13 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CFG_MEMTEST_START 0x00200000 /* memtest works on */
#define CFG_MEMTEST_END 0x00400000
#define CFG_ALT_MEMTEST
-#define CONFIG_PANIC_HANG /* do not reset board on panic */
+#define CONFIG_PANIC_HANG /* do not reset board on panic */
/*
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*/
-#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
@@ -344,7 +345,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SATA_ULI5288
#define CFG_SCSI_MAX_SCSI_ID 4
#define CFG_SCSI_MAX_LUN 1
-#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
+#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
#define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE
#endif /* SCSCI */
@@ -354,7 +355,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_MII 1 /* MII PHY management */
@@ -365,6 +366,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_TSEC3_NAME "eTSEC3"
#undef CONFIG_MPC85XX_FEC
+#define CONFIG_TSEC_TBI 1 /* enable internal TBI phy */
+#define CONFIG_SGMII_RISER
+#define TSEC1_SGMII_PHY_ADDR_OFFSET 0x1c /* sgmii phy base */
+
#define TSEC1_PHY_ADDR 0
#define TSEC3_PHY_ADDR 1
@@ -374,7 +379,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_ETHPRIME "eTSEC1"
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
-
#endif /* CONFIG_TSEC_ENET */
/*
@@ -392,7 +396,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
/*
* BOOTP options
*/
@@ -415,6 +418,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_CMD_PCI
#define CONFIG_CMD_BEDBUG
#define CONFIG_CMD_NET
+ #define CONFIG_CMD_SCSI
+ #define CONFIG_CMD_EXT2
#endif
@@ -441,10 +446,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
/* Cache Configuration */
-#define CFG_DCACHE_SIZE 32768
+#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
@@ -482,7 +487,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_HOSTNAME 8544ds_unknown
#define CONFIG_ROOTPATH /nfs/mpc85xx
-#define CONFIG_BOOTFILE 8544ds_tmt/uImage.uboot
+#define CONFIG_BOOTFILE 8544ds/uImage.uboot
+#define CONFIG_UBOOTPATH 8544ds/u-boot.bin /* TFTP server */
#define CONFIG_SERVERIP 192.168.0.1
#define CONFIG_GATEWAYIP 192.168.0.1
@@ -491,7 +497,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/
#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
-#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
#define CONFIG_BAUDRATE 115200
@@ -499,10 +505,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define PCIE_ENV \
"pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \
"echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \
- "pcie1regs=setenv a e000a; run pciereg\0" \
- "pcie2regs=setenv a e0009; run pciereg\0" \
- "pcie3regs=setenv a e000b; run pciereg\0" \
- "pcieerr=md ${a}020 1; md ${a}e00;" \
+ "pcieerr=md ${a}020 1; md ${a}e00 e;" \
"pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
"pci d.w $b.0 56 1;" \
"pci d $b.0 104 1;pci d $b.0 110 1;pci d $b.0 130 1\0" \
@@ -511,12 +514,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
"pci w $b.0 104 ffffffff; pci w $b.0 110 ffffffff;" \
"pci w $b.0 130 ffffffff\0" \
"pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \
- "pcie1err=setenv a e000a; run pcieerr\0" \
- "pcie2err=setenv a e0009; run pcieerr\0" \
- "pcie3err=setenv a e000b; run pcieerr\0" \
- "pcie1errc=setenv a e000a; run pcieerrc\0" \
- "pcie2errc=setenv a e0009; run pcieerrc\0" \
- "pcie3errc=setenv a e000b; run pcieerrc\0"
+ "pcie1regs=setenv a e000a; run pciereg\0" \
+ "pcie2regs=setenv a e0009; run pciereg\0" \
+ "pcie3regs=setenv a e000b; run pciereg\0" \
+ "pcie1cfg=setenv b 3; run pciecfg\0" \
+ "pcie2cfg=setenv b 5; run pciecfg\0" \
+ "pcie3cfg=setenv b 0; run pciecfg\0" \
+ "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0" \
+ "pcie2err=setenv a e0009; setenv b 5; run pcieerr\0" \
+ "pcie3err=setenv a e000b; setenv b 0; run pcieerr\0" \
+ "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0" \
+ "pcie2errc=setenv a e0009; setenv b 5; run pcieerrc\0" \
+ "pcie3errc=setenv a e000b; setenv b 0; run pcieerrc\0"
#else
#define PCIE_ENV ""
#endif
@@ -524,14 +533,14 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#if defined(CONFIG_PCI1)
#define PCI_ENV \
"pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \
- "echo e;md ${a}e00 9\0" \
+ "echo e;md ${a}e00 9\0" \
"pci1regs=setenv a e0008; run pcireg\0" \
"pcierr=md ${a}e00 8; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
"pci d.w $b.0 56 1\0" \
- "pcierrc=mw ${a}e00 ffffffff; pci w.b $b.0 7 ff; pci w.w $b.0 1e ffff;" \
- "pci w.w $b.0 56 ffff\0" \
- "pci1err=setenv a e0008; run pcierr\0" \
- "pci1errc=setenv a e0008; run pcierrc\0"
+ "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \
+ "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0" \
+ "pci1err=setenv a e0008; setenv b 7; run pcierr\0" \
+ "pci1errc=setenv a e0008; setenv b 7; run pcierrc\0"
#else
#define PCI_ENV ""
#endif
@@ -551,25 +560,39 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define ENET_ENV ""
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
+ "tftpflash=tftpboot $loadaddr $uboot; " \
+ "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
"consoledev=ttyS0\0" \
"ramdiskaddr=2000000\0" \
- "ramdiskfile=8544ds_tmt/ramdisk.uboot\0" \
- "fdtaddr=400000\0" \
- "fdtfile=8544ds_tmt/mpc8544ds.dtb\0" \
- "eoi=mw e00400b0 0\0" \
- "iack=md e00400a0 1\0" \
+ "ramdiskfile=8544ds/ramdisk.uboot\0" \
+ "dtbaddr=c00000\0" \
+ "dtbfile=8544ds/mpc8544ds.dtb\0" \
+ "bdev=sda3\0" \
+ "eoi=mw e00400b0 0\0" \
+ "iack=md e00400a0 1\0" \
"ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \
"md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \
- "ddrregs=setenv a e0002; run ddrreg\0" \
+ "ddrregs=setenv a e0002; run ddrreg\0" \
"gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \
- "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \
- "guregs=setenv a e00e0; run gureg\0" \
+ "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \
+ "guregs=setenv a e00e0; run gureg\0" \
"ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \
- "ecmregs=setenv a e0001; run ecmreg\0" \
- PCIE_ENV \
- PCI_ENV \
+ "ecmregs=setenv a e0001; run ecmreg\0" \
+ "lawregs=md e0000c08 4b\0" \
+ "lbcregs=md e0005000 36\0" \
+ "dma0regs=md e0021100 12\0" \
+ "dma1regs=md e0021180 12\0" \
+ "dma2regs=md e0021200 12\0" \
+ "dma3regs=md e0021280 12\0" \
+ PCIE_ENV \
+ PCI_ENV \
ENET_ENV
@@ -579,23 +602,23 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
+ "tftp $dtbaddr $dtbfile;" \
+ "bootm $loadaddr - $dtbaddr"
-#define CONFIG_RAMBOOTCOMMAND \
+#define CONFIG_RAMBOOTCOMMAND \
"setenv bootargs root=/dev/ram rw " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $ramdiskaddr $ramdiskfile;" \
"tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr"
+ "tftp $dtbaddr $dtbfile;" \
+ "bootm $loadaddr $ramdiskaddr $dtbaddr"
-#define CONFIG_BOOTCOMMAND \
- "setenv bootargs root=/dev/sda3 rw " \
+#define CONFIG_BOOTCOMMAND \
+ "setenv bootargs root=/dev/$bdev rw " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
+ "tftp $dtbaddr $dtbfile;" \
+ "bootm $loadaddr - $dtbaddr"
#endif /* __CONFIG_H */