summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorAnton Vorontsov <avorontsov@ru.mvista.com>2009-10-15 17:47:06 +0400
committerKumar Gala <galak@kernel.crashing.org>2009-10-27 09:36:48 -0500
commit7f52ed5ef1b490da282ace3316be381a6abf96a5 (patch)
tree775e133205d0440cb47776e4b64a0442c339b1d8 /include
parent48618126f78f05042dae428811809b594f747eb9 (diff)
downloadu-boot-imx-7f52ed5ef1b490da282ace3316be381a6abf96a5.zip
u-boot-imx-7f52ed5ef1b490da282ace3316be381a6abf96a5.tar.gz
u-boot-imx-7f52ed5ef1b490da282ace3316be381a6abf96a5.tar.bz2
mpc85xx: Add eSDHC support for MPC8569E-MDS boards
eSDHC is mutually exlusive with UART0 (in 4-bits mode) and I2C2 (in 1-bit mode). When eSDHC is used, we should switch u-boot console to UART1, and make the proper device-tree fixups. Because of an erratum in prototype boards it is impossible to use eSDHC without disabling UART0 (which makes it quite easy to 'brick' the board by simply issung 'setenv hwconfig esdhc', and not able to interact with U-Boot anylonger). So, but default we assume that the board is a prototype, which is a most safe assumption. There is no way to determine board revision from a register, so we use hwconfig. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'include')
-rw-r--r--include/configs/MPC8569MDS.h16
1 files changed, 16 insertions, 0 deletions
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 32e747e..3d07a5b 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -70,6 +70,7 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_ENABLE_36BIT_PHYS 1
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
+#define CONFIG_HWCONFIG
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00400000
@@ -206,6 +207,7 @@ extern unsigned long get_clock_freq(void);
/* Serial Port */
#define CONFIG_CONS_INDEX 1
+#define CONFIG_SERIAL_MULTI 1
#undef CONFIG_SERIAL_SOFTWARE_FIFO
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
@@ -258,8 +260,10 @@ extern unsigned long get_clock_freq(void);
#define PLPPAR1_I2C_BIT_MASK 0x0000000F
#define PLPPAR1_I2C2_VAL 0x00000000
+#define PLPPAR1_ESDHC_VAL 0x0000000A
#define PLPDIR1_I2C_BIT_MASK 0x0000000F
#define PLPDIR1_I2C2_VAL 0x0000000F
+#define PLPDIR1_ESDHC_VAL 0x00000006
/*
* General PCI
@@ -450,6 +454,18 @@ extern unsigned long get_clock_freq(void);
#undef CONFIG_WATCHDOG /* watchdog disabled */
+#define CONFIG_MMC 1
+
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
/*
* Miscellaneous configurable options
*/