summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorSimon Glass <sjg@chromium.org>2015-08-30 19:18:59 -0600
committerTom Rini <trini@konsulko.com>2015-09-11 14:11:11 -0400
commit6761946fb716255c32908059de1e2a0d0e05afb1 (patch)
tree337f16c263123357b3b3721059d1e1935b1875b7 /include
parent7495e41ba6420b6a5fd8928cded32d789d4c1639 (diff)
downloadu-boot-imx-6761946fb716255c32908059de1e2a0d0e05afb1.zip
u-boot-imx-6761946fb716255c32908059de1e2a0d0e05afb1.tar.gz
u-boot-imx-6761946fb716255c32908059de1e2a0d0e05afb1.tar.bz2
arm: Remove unmaintained davinci boards
These boards have not been converted to generic board by the deadline. Remove dm355evm, dm355leopard, dm365evm, dm6467evm, dvevm, ea20, schmoogie, sffsdr, sonata. Signed-off-by: Simon Glass <sjg@chromium.org>
Diffstat (limited to 'include')
-rw-r--r--include/configs/davinci_dm355evm.h195
-rw-r--r--include/configs/davinci_dm355leopard.h140
-rw-r--r--include/configs/davinci_dm365evm.h220
-rw-r--r--include/configs/davinci_dm6467evm.h138
-rw-r--r--include/configs/davinci_dvevm.h216
-rw-r--r--include/configs/davinci_schmoogie.h136
-rw-r--r--include/configs/davinci_sffsdr.h129
-rw-r--r--include/configs/davinci_sonata.h187
8 files changed, 0 insertions, 1361 deletions
diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h
deleted file mode 100644
index 72296a0..0000000
--- a/include/configs/davinci_dm355evm.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * Copyright (C) 2009 David Brownell
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* Spectrum Digital TMS320DM355 EVM board */
-#define DAVINCI_DM355EVM
-
-#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */
-#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-
-/* SoC Configuration */
-#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
-#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */
-#define CONFIG_SOC_DM355
-
-/* Memory Info */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x80000000
-#define PHYS_SDRAM_1_SIZE (128 << 20) /* 128 MiB */
-
-/* Serial Driver info: UART0 for console */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE -4
-#define CONFIG_SYS_NS16550_COM1 0x01c20000
-#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-
-/* Ethernet: external DM9000 */
-#define CONFIG_DRIVER_DM9000 1
-#define CONFIG_DM9000_BASE 0x04014000
-#define DM9000_IO CONFIG_DM9000_BASE
-#define DM9000_DATA (CONFIG_DM9000_BASE + 2)
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_DAVINCI
-#define CONFIG_SYS_DAVINCI_I2C_SPEED 400000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */
-
-/* NAND: socketed, two chipselects, normally 2 GBytes */
-#define CONFIG_NAND_DAVINCI
-#define CONFIG_SYS_NAND_CS 2
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
-#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
-#define CONFIG_SYS_NAND_PAGE_2K
-
-#define CONFIG_SYS_NAND_LARGEPAGE
-#define CONFIG_SYS_NAND_BASE_LIST { 0x02000000, }
-/* socket has two chipselects, nCE0 gated by address BIT(14) */
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_MAX_CHIPS 2
-
-/* SD/MMC */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DAVINCI_MMC
-#define CONFIG_DAVINCI_MMC_SD1
-#define CONFIG_MMC_MBLOCK
-
-/* USB: OTG connector */
-/* NYET -- #define CONFIG_USB_DAVINCI */
-
-/* U-Boot command configuration */
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-
-#ifdef CONFIG_CMD_BDI
-#define CONFIG_CLOCKS
-#endif
-
-#ifdef CONFIG_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_MMC
-#endif
-
-#ifdef CONFIG_NAND_DAVINCI
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_UBI
-#define CONFIG_RBTREE
-#endif
-
-#ifdef CONFIG_USB_DAVINCI
-#define CONFIG_USB_MUSB_HCD
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#else
-#undef CONFIG_USB_MUSB_HCD
-#undef CONFIG_CMD_USB
-#undef CONFIG_USB_STORAGE
-#endif
-
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-
-/* U-Boot general configuration */
-#define CONFIG_BOOTFILE "uImage" /* Boot file name */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE /* Print buffer size */ \
- (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP
-
-#ifdef CONFIG_NAND_DAVINCI
-#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET 0x3C0000
-#undef CONFIG_ENV_IS_IN_FLASH
-#endif
-
-#if defined(CONFIG_MMC) && !defined(CONFIG_ENV_IS_IN_NAND)
-#define CONFIG_CMD_ENV
-#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
-#define CONFIG_ENV_OFFSET (51 << 9) /* Sector 51 */
-#define CONFIG_ENV_IS_IN_MMC
-#undef CONFIG_ENV_IS_IN_FLASH
-#endif
-
-#define CONFIG_BOOTDELAY 5
-#define CONFIG_BOOTCOMMAND \
- "dhcp;bootm"
-#define CONFIG_BOOTARGS \
- "console=ttyS0,115200n8 " \
- "root=/dev/mmcblk0p1 rootwait rootfstype=ext3 ro"
-
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_TIMESTAMP
-
-#define CONFIG_NET_RETRY_COUNT 10
-
-/* U-Boot memory configuration */
-#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */
-#define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */
-#define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */
-
-/* Linux interfacing */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_SYS_BARGSIZE 1024 /* bootarg Size */
-#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */
-
-
-/* NAND configuration ... socketed with two chipselects. It normally comes
- * with a 2GByte SLC part with 2KB pages (and 128KB erase blocks); other
- * 2GByte parts may have 4KB pages, 256KB erase blocks, and use MLC. (MLC
- * pretty much demands the 4-bit ECC support.) You can of course swap in
- * other parts, including small page ones.
- *
- * This presents a single read-only partition for all bootloader stuff.
- * UBL (1+ block), U-Boot (256KB+), U-Boot environment (one block), and
- * some extra space to help cope with bad blocks in that data. Linux
- * shouldn't care about its detailed layout, and will probably want to use
- * UBI/UBFS for the rest (except maybe on smallpage chips). It's easy to
- * override this default partitioning using MTDPARTS and cmdlinepart.
- */
-#define MTDIDS_DEFAULT "nand0=davinci_nand.0"
-
-#ifdef CONFIG_SYS_NAND_LARGEPAGE
-/* Use same layout for 128K/256K blocks; allow some bad blocks */
-#define PART_BOOT "2m(bootloader)ro,"
-#else
-/* Assume 16K erase blocks; allow a few bad ones. */
-#define PART_BOOT "512k(bootloader)ro,"
-#endif
-
-#define PART_KERNEL "4m(kernel)," /* kernel + initramfs */
-#define PART_REST "-(filesystem)"
-
-#define MTDPARTS_DEFAULT \
- "mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST
-
-#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h
deleted file mode 100644
index e3ff943..0000000
--- a/include/configs/davinci_dm355leopard.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Incorporated
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define DAVINCI_DM355LEOPARD
-
-#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */
-#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-
-/* SoC Configuration */
-#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
-#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */
-#define CONFIG_SOC_DM355 /* DM355 based board */
-
-/* Memory Info */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x80000000
-#define PHYS_SDRAM_1_SIZE (128 << 20) /* 128 MiB */
-
-/* Serial Driver info: UART0 for console */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE -4
-#define CONFIG_SYS_NS16550_COM1 0x01c20000
-#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-
-/* Ethernet: external DM9000 */
-#define CONFIG_DRIVER_DM9000 1
-#define CONFIG_DM9000_BASE 0x04000000
-#define DM9000_IO CONFIG_DM9000_BASE
-#define DM9000_DATA (CONFIG_DM9000_BASE + 16)
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_DAVINCI
-#define CONFIG_SYS_DAVINCI_I2C_SPEED 400000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10
-
-/* NAND */
-#define CONFIG_NAND_DAVINCI
-#define CONFIG_SYS_NAND_CS 2
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
-#define CONFIG_SYS_NAND_HW_ECC
-
-#define CONFIG_SYS_NAND_BASE_LIST { 0x02000000, }
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-
-/* U-Boot command configuration */
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-
-#ifdef CONFIG_CMD_BDI
-#define CONFIG_CLOCKS
-#endif
-
-#ifdef CONFIG_NAND_DAVINCI
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_UBI
-#define CONFIG_RBTREE
-#endif
-
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-
-/* U-Boot general configuration */
-#define CONFIG_BOOTFILE "uImage" /* Boot file name */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE /* Print buffer size */ \
- (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP
-
-#ifdef CONFIG_NAND_DAVINCI
-#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET 0x3C0000
-#undef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_OVERWRITE
-#endif
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTCOMMAND "dhcp;bootm"
-#define CONFIG_BOOTARGS \
- "console=ttyS0,115200n8 " \
- "root=/dev/mmcblk0p1 rootwait rootfstype=ext3 ro"
-
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_TIMESTAMP
-
-#define CONFIG_NET_RETRY_COUNT 10
-
-/* U-Boot memory configuration */
-#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */
-#define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */
-#define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */
-
-/* Linux interfacing */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_SYS_BARGSIZE 1024 /* bootarg Size */
-#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */
-
-#define MTDIDS_DEFAULT "nand0=davinci_nand.0"
-
-#ifdef CONFIG_SYS_NAND_LARGEPAGE
-#define PART_BOOT "2m(bootloader)ro,"
-#else
-/* Assume 16K erase blocks; allow a few bad ones. */
-#define PART_BOOT "512k(bootloader)ro,"
-#endif
-
-#define PART_KERNEL "4m(kernel)," /* kernel + initramfs */
-#define PART_REST "-(filesystem)"
-
-#define MTDPARTS_DEFAULT \
- "mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST
-
-#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h
deleted file mode 100644
index bbc801b..0000000
--- a/include/configs/davinci_dm365evm.h
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Incorporated
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* Spectrum Digital TMS320DM365 EVM board */
-#define DAVINCI_DM365EVM
-
-#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */
-#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-
-/* SoC Configuration */
-#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
-#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */
-#define CONFIG_SOC_DM365
-
-/* Memory Info */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x80000000
-#define PHYS_SDRAM_1_SIZE (128 << 20) /* 128 MiB */
-
-/* Serial Driver info: UART0 for console */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE -4
-#define CONFIG_SYS_NS16550_COM1 0x01c20000
-#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-
-/* EEPROM definitions for EEPROM on DM365 EVM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
-
-/* Network Configuration */
-#define CONFIG_DRIVER_TI_EMAC
-#define CONFIG_MII
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT 10
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_DAVINCI
-#define CONFIG_SYS_DAVINCI_I2C_SPEED 400000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */
-
-/* NAND: socketed, two chipselects, normally 2 GBytes */
-#define CONFIG_NAND_DAVINCI
-#define CONFIG_SYS_NAND_CS 2
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
-#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
-#define CONFIG_SYS_NAND_PAGE_2K
-
-#define CONFIG_SYS_NAND_LARGEPAGE
-#define CONFIG_SYS_NAND_BASE_LIST { 0x02000000, }
-/* socket has two chipselects, nCE0 gated by address BIT(14) */
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_MAX_CHIPS 2
-
-/* SD/MMC */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DAVINCI_MMC
-#define CONFIG_DAVINCI_MMC_SD1
-#define CONFIG_MMC_MBLOCK
-
-#define PINMUX4_USBDRVBUS_BITCLEAR 0x3000
-#define PINMUX4_USBDRVBUS_BITSET 0x2000
-
-/* USB Configuration */
-#define CONFIG_USB_DAVINCI
-#define CONFIG_USB_MUSB_HCD
-
-#ifdef CONFIG_USB_DAVINCI
-#define CONFIG_CMD_USB /* include support for usb */
-#define CONFIG_CMD_STORAGE /* include support for usb */
-#define CONFIG_CMD_FAT /* include support for FAT/storage*/
-#define CONFIG_DOS_PARTITION /* include support for FAT/storage*/
-#endif
-
-#ifdef CONFIG_USB_MUSB_HCD /* include support for usb host */
-#define CONFIG_CMD_USB /* include support for usb cmd */
-#define CONFIG_USB_STORAGE /* MSC class support */
-#define CONFIG_CMD_STORAGE /* inclue support for usb-storage cmd */
-#define CONFIG_CMD_FAT /* inclue support for FAT/storage */
-#define CONFIG_DOS_PARTITION /* inclue support for FAT/storage */
-
-#ifdef CONFIG_USB_KEYBOARD /* HID class support */
-#define CONFIG_SYS_USB_EVENT_POLL
-
-#define CONFIG_PREBOOT "usb start"
-#endif /* CONFIG_USB_KEYBOARD */
-#endif /* CONFIG_USB_MUSB_HCD */
-
-#ifdef CONFIG_USB_MUSB_UDC
-#define CONFIG_USB_DEVICE 1
-#define CONFIG_USB_TTY 1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
-#define CONFIG_USBD_VENDORID 0x0451
-#define CONFIG_USBD_PRODUCTID 0x5678
-#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
-#define CONFIG_USBD_PRODUCT_NAME "DM365VM"
-#endif /* CONFIG_USB_MUSB_UDC */
-
-/* U-Boot command configuration */
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-
-#ifdef CONFIG_CMD_BDI
-#define CONFIG_CLOCKS
-#endif
-
-#ifdef CONFIG_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_MMC
-#endif
-
-#ifdef CONFIG_NAND_DAVINCI
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_UBI
-#define CONFIG_RBTREE
-#endif
-
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-
-/* U-Boot general configuration */
-#define CONFIG_BOOTFILE "uImage" /* Boot file name */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE /* Print buffer size */ \
- (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP
-
-#ifdef CONFIG_NAND_DAVINCI
-#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET 0x3C0000
-#undef CONFIG_ENV_IS_IN_FLASH
-#endif
-
-#if defined(CONFIG_MMC) && !defined(CONFIG_ENV_IS_IN_NAND)
-#define CONFIG_CMD_ENV
-#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
-#define CONFIG_ENV_OFFSET (51 << 9) /* Sector 51 */
-#define CONFIG_ENV_IS_IN_MMC
-#undef CONFIG_ENV_IS_IN_FLASH
-#endif
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTCOMMAND \
- "dhcp;bootm"
-#define CONFIG_BOOTARGS \
- "console=ttyS0,115200n8 " \
- "root=/dev/mmcblk0p1 rootwait rootfstype=ext3 ro"
-
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_TIMESTAMP
-
-/* U-Boot memory configuration */
-#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */
-#define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */
-#define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */
-
-/* Linux interfacing */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_SYS_BARGSIZE 1024 /* bootarg Size */
-#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */
-
-
-/* NAND configuration issocketed with two chipselects just like the DM355 EVM.
- * It normally comes with a 2GByte SLC part with 2KB pages
- * (and 128KB erase blocks); other
- * 2GByte parts may have 4KB pages, 256KB erase blocks, and use MLC. (MLC
- * pretty much demands the 4-bit ECC support.) You can of course swap in
- * other parts, including small page ones.
- */
-#define MTDIDS_DEFAULT "nand0=davinci_nand.0"
-
-#ifdef CONFIG_SYS_NAND_LARGEPAGE
-/* Use same layout for 128K/256K blocks; allow some bad blocks */
-#define PART_BOOT "2m(bootloader)ro,"
-#else
-/* Assume 16K erase blocks; allow a few bad ones. */
-#define PART_BOOT "512k(bootloader)ro,"
-#endif
-
-#define PART_KERNEL "4m(kernel)," /* kernel + initramfs */
-#define PART_REST "-(filesystem)"
-
-#define MTDPARTS_DEFAULT \
- "mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST
-
-#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h
deleted file mode 100644
index 6346422..0000000
--- a/include/configs/davinci_dm6467evm.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Incorporated
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* Spectrum Digital TMS320DM6467 EVM board */
-#define DAVINCI_DM6467EVM
-#define CONFIG_SYS_USE_NAND
-#define CONFIG_SYS_NAND_SMALLPAGE
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/* SoC Configuration */
-
-/* Clock rates detection */
-#ifndef __ASSEMBLY__
-extern unsigned int davinci_arm_clk_get(void);
-#endif
-
-/* Arm Clock frequency */
-#define CONFIG_SYS_CLK_FREQ davinci_arm_clk_get()
-/* Timer Input clock freq */
-#define CONFIG_SYS_HZ_CLOCK (CONFIG_SYS_CLK_FREQ/2)
-#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
-#define CONFIG_SOC_DM646X
-
-/* EEPROM definitions for EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
-
-/* Memory Info */
-#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */
-#define CONFIG_SYS_MEMTEST_START 0x80000000
-#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
-#define PHYS_SDRAM_1_SIZE (256 << 20) /* DDR size 256MB */
-
-/* Linux interfacing */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_SYS_BARGSIZE 1024 /* Bootarg Size */
-#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */
-#define CONFIG_REVISION_TAG
-
-/* Serial Driver info */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 4
-#define CONFIG_SYS_NS16550_COM1 0x01c20000
-#define CONFIG_SYS_NS16550_CLK 24000000
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-
-/* I2C Configuration */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_DAVINCI
-#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10
-
-/* Network & Ethernet Configuration */
-#define CONFIG_DRIVER_TI_EMAC
-#define CONFIG_MII
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT 10
-
-/* Flash & Environment */
-#define CONFIG_SYS_NO_FLASH
-#ifdef CONFIG_SYS_USE_NAND
-#define CONFIG_NAND_DAVINCI
-#define CONFIG_SYS_NAND_MASK_CLE 0x80000
-#define CONFIG_SYS_NAND_MASK_ALE 0x40000
-#define CONFIG_SYS_NAND_CS 2
-#undef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
-#define CONFIG_SYS_NAND_BASE_LIST {0x42000000, }
-#define CONFIG_SYS_NAND_HW_ECC
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_ENV_OFFSET 0
-#else
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_SIZE (4 << 10) /* 4 KiB */
-#endif
-
-/* U-Boot general configuration */
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTFILE "uImage" /* Boot file name */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE \
- (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-#define CONFIG_BOOTCOMMAND "source 0x82080000; dhcp; bootm"
-#define CONFIG_BOOTARGS \
- "mem=120M console=ttyS0,115200n8 " \
- "root=/dev/hda1 rw noinitrd ip=dhcp"
-
-/* U-Boot commands */
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#ifdef CONFIG_SYS_USE_NAND
-#define CONFIG_CMD_NAND
-#endif
-
-#ifdef CONFIG_CMD_BDI
-#define CONFIG_CLOCKS
-#endif
-
-#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
deleted file mode 100644
index 15d8150..0000000
--- a/include/configs/davinci_dvevm.h
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * Define this to make U-Boot skip low level initialization when loaded
- * by initial bootloader. Not required by NAND U-Boot version but IS
- * required for a NOR version used to burn the real NOR U-Boot into
- * NOR Flash. NAND and NOR support for DaVinci chips is mutually exclusive
- * so it is NOT possible to build a U-Boot with both NAND and NOR routines.
- * NOR U-Boot is loaded directly from Flash so it must perform all the
- * low level initialization itself. NAND version is loaded by an initial
- * bootloader (UBL in TI-ese) that performs such an initialization so it's
- * skipped in NAND version. The third DaVinci boot mode loads a bootloader
- * via UART0 and that bootloader in turn loads and runs U-Boot (or whatever)
- * performing low level init prior to loading. All that means we can NOT use
- * NAND version to put U-Boot into NOR because it doesn't have NOR support and
- * we can NOT use NOR version because it performs low level initialization
- * effectively destroying itself in DDR memory. That's why a separate NOR
- * version with this define is needed. It is loaded via UART, then one uses
- * it to somehow download a proper NOR version built WITHOUT this define to
- * RAM (tftp?) and burn it to NOR Flash. I would be probably able to squeeze
- * NOR support into the initial bootloader so it won't be needed but DaVinci
- * static RAM might be too small for this (I have something like 2Kbytes left
- * as of now, without NOR support) so this might've not happened...
- *
-#define CONFIG_NOR_UART_BOOT
- */
-
-/*=======*/
-/* Board */
-/*=======*/
-#define DV_EVM
-#define CONFIG_SYS_NAND_SMALLPAGE
-#define CONFIG_SYS_USE_NAND
-/*===================*/
-/* SoC Configuration */
-/*===================*/
-#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
-#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */
-#define CONFIG_SOC_DM644X
-/*====================================================*/
-/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
-/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */
-/*====================================================*/
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
-/*=============*/
-/* Memory Info */
-/*=============*/
-#define CONFIG_SYS_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */
-#define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */
-#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
-#define PHYS_SDRAM_1_SIZE 0x10000000 /* DDR size 256MB */
-
-#define DDR_8BANKS /* 8-bank DDR2 (256MB) */
-/*====================*/
-/* Serial Driver info */
-/*====================*/
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size, byteorder */
-#define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */
-#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */
-#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
-#define CONFIG_BAUDRATE 115200 /* Default baud rate */
-/*===================*/
-/* I2C Configuration */
-/*===================*/
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_DAVINCI
-#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
-/*==================================*/
-/* Network & Ethernet Configuration */
-/*==================================*/
-#define CONFIG_DRIVER_TI_EMAC
-#define CONFIG_MII
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT 10
-/*=====================*/
-/* Flash & Environment */
-/*=====================*/
-#ifdef CONFIG_SYS_USE_NAND
-#define CONFIG_NAND_DAVINCI
-#define CONFIG_SYS_NAND_CS 2
-#undef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
-#ifdef CONFIG_SYS_NAND_SMALLPAGE
-#define CONFIG_ENV_SECT_SIZE 512 /* Env sector Size */
-#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT \
- "nand0=davinci_nand.0"
-#define MTDPARTS_DEFAULT \
- "mtdparts=davinci_nand.0:384k(bootloader)ro,4m(kernel),-(filesystem)"
-#else
-#define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */
-#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
-#endif
-#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
-#define CONFIG_SYS_NAND_BASE 0x02000000
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
-#define CONFIG_SYS_NAND_HW_ECC
-#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
-#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
-#elif defined(CONFIG_SYS_USE_NOR)
-#ifdef CONFIG_NOR_UART_BOOT
-#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
-#else
-#undef CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-#define CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_SYS_NO_FLASH
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */
-#define CONFIG_SYS_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */
-#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ*3)
-#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */
-#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */
-#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)
-#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ /* Env sector Size */
-#endif
-/*==============================*/
-/* U-Boot general configuration */
-/*==============================*/
-#define CONFIG_MISC_INIT_R
-#undef CONFIG_BOOTDELAY
-#define CONFIG_BOOTFILE "uImage" /* Boot file name */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buffer sz */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* default Linux kernel load address */
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-#define CONFIG_USB_MUSB_HCD
-#define CONFIG_USB_DAVINCI
-/*===================*/
-/* Linux Information */
-/*===================*/
-#define LINUX_BOOT_PARAM_ADDR 0x80000100
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTARGS "mem=120M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
-#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot; bootm 0x2050000"
-/*=================*/
-/* U-Boot commands */
-/*=================*/
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_EEPROM
-
-#ifdef CONFIG_CMD_BDI
-#define CONFIG_CLOCKS
-#endif
-
-#ifdef CONFIG_SYS_USE_NAND
-#define CONFIG_CMD_NAND
-#elif defined(CONFIG_SYS_USE_NOR)
-#define CONFIG_CMD_JFFS2
-#else
-#error "Either CONFIG_SYS_USE_NAND or CONFIG_SYS_USE_NOR _MUST_ be defined !!!"
-#endif
-/*==========================*/
-/* USB MSC support (if any) */
-/*==========================*/
-#ifdef CONFIG_USB_DAVINCI
-#define CONFIG_CMD_USB
-#ifdef CONFIG_USB_MUSB_HCD
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_STORAGE
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-#endif
-#ifdef CONFIG_USB_KEYBOARD
-#define CONFIG_SYS_USB_EVENT_POLL
-#define CONFIG_PREBOOT "usb start"
-#endif
-#endif
-
-#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
deleted file mode 100644
index bc5e1ca..0000000
--- a/include/configs/davinci_schmoogie.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*=======*/
-/* Board */
-/*=======*/
-#define SCHMOOGIE
-#define CONFIG_SYS_NAND_LARGEPAGE
-#define CONFIG_SYS_USE_NAND
-#define MACH_TYPE_SCHMOOGIE 1255
-#define CONFIG_MACH_TYPE MACH_TYPE_SCHMOOGIE
-
-/*===================*/
-/* SoC Configuration */
-/*===================*/
-#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
-#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */
-#define CONFIG_SOC_DM644X
-/*=============*/
-/* Memory Info */
-/*=============*/
-#define CONFIG_SYS_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */
-#define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */
-#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
-#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */
-#define DDR_4BANKS /* 4-bank DDR2 (128MB) */
-/*====================*/
-/* Serial Driver info */
-/*====================*/
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size, byteorder */
-#define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */
-#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */
-#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
-#define CONFIG_BAUDRATE 115200 /* Default baud rate */
-/*===================*/
-/* I2C Configuration */
-/*===================*/
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_DAVINCI
-#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
-/*==================================*/
-/* Network & Ethernet Configuration */
-/*==================================*/
-#define CONFIG_DRIVER_TI_EMAC
-#define CONFIG_MII
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT 10
-#define CONFIG_OVERWRITE_ETHADDR_ONCE
-/*=====================*/
-/* Flash & Environment */
-/*=====================*/
-#undef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_NAND_DAVINCI
-#define CONFIG_SYS_NAND_CS 2
-#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
-#define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */
-#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
-#define CONFIG_SYS_NAND_BASE 0x02000000
-#define CONFIG_SYS_NAND_HW_ECC
-#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
-#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
-/*=====================*/
-/* Board related stuff */
-/*=====================*/
-#define CONFIG_RTC_DS1307 /* RTC chip on SCHMOOGIE */
-#define CONFIG_SYS_I2C_RTC_ADDR 0x6f /* RTC chip I2C address */
-#define CONFIG_UID_DS28CM00 /* Unique ID on SCHMOOGIE */
-#define CONFIG_SYS_UID_ADDR 0x50 /* UID chip I2C address */
-/*==============================*/
-/* U-Boot general configuration */
-/*==============================*/
-#define CONFIG_MISC_INIT_R
-#undef CONFIG_BOOTDELAY
-#define CONFIG_BOOTFILE "uImage" /* Boot file name */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buffer sz */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* default Linux kernel load address */
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-/*===================*/
-/* Linux Information */
-/*===================*/
-#define LINUX_BOOT_PARAM_ADDR 0x80000100
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTARGS "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
-#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot"
-/*=================*/
-/* U-Boot commands */
-/*=================*/
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_NAND
-#undef CONFIG_CMD_EEPROM
-
-#ifdef CONFIG_CMD_BDI
-#define CONFIG_CLOCKS
-#endif
-
-#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h
deleted file mode 100644
index e719388..0000000
--- a/include/configs/davinci_sffsdr.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
- * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* Board */
-#define SFFSDR
-#define CONFIG_SYS_NAND_LARGEPAGE
-#define CONFIG_SYS_USE_NAND
-#define CONFIG_SYS_USE_DSPLINK /* don't power up the DSP. */
-/* SoC Configuration */
-#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
-#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */
-#define CONFIG_SOC_DM644X
-/* EEPROM definitions for Atmel 24LC64 EEPROM chip */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
-/* Memory Info */
-#define CONFIG_SYS_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */
-#define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */
-#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
-#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */
-#define DDR_4BANKS /* 4-bank DDR2 (128MB) */
-/* Serial Driver info */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size, byteorder */
-#define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */
-#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */
-#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
-#define CONFIG_BAUDRATE 115200 /* Default baud rate */
-/* I2C Configuration */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_DAVINCI
-#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
-/* Network & Ethernet Configuration */
-#define CONFIG_DRIVER_TI_EMAC
-#define CONFIG_MII
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT 10
-#define CONFIG_OVERWRITE_ETHADDR_ONCE
-/* Flash & Environment */
-#undef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_NAND_DAVINCI
-#define CONFIG_SYS_NAND_CS 2
-#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
-#define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */
-#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
-#define CONFIG_SYS_NAND_BASE 0x02000000
-#define CONFIG_SYS_NAND_HW_ECC
-#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
-#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
-/* I2C switch definitions for PCA9543 chip */
-#define CONFIG_SYS_I2C_PCA9543_ADDR 0x70
-#define CONFIG_SYS_I2C_PCA9543_ADDR_LEN 0 /* Single register. */
-#define CONFIG_SYS_I2C_PCA9543_ENABLE_CH0 0x01 /* Enable channel 0. */
-/* U-Boot general configuration */
-#define CONFIG_MISC_INIT_R
-#define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds. */
-#define CONFIG_BOOTFILE "uImage" /* Boot file name */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE \
- (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print buffer size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* Default Linux kernel
- * load address. */
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far,
- * may be later */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-/* Linux Information */
-#define LINUX_BOOT_PARAM_ADDR 0x80000100
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTARGS \
- "mem=56M " \
- "console=ttyS0,115200n8 " \
- "root=/dev/nfs rw noinitrd ip=dhcp " \
- "nfsroot=${serverip}:/nfsroot/sffsdr " \
- "eth0=${ethaddr}"
-#define CONFIG_BOOTCOMMAND \
- "nand read 87A00000 100000 300000;" \
- "bootelf 87A00000"
-/* U-Boot commands */
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF /* Needed to load Integrity kernel. */
-
-#ifdef CONFIG_CMD_BDI
-#define CONFIG_CLOCKS
-#endif
-
-#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h
deleted file mode 100644
index b85c988..0000000
--- a/include/configs/davinci_sonata.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * Define this to make U-Boot skip low level initialization when loaded
- * by initial bootloader. Not required by NAND U-Boot version but IS
- * required for a NOR version used to burn the real NOR U-Boot into
- * NOR Flash. NAND and NOR support for DaVinci chips is mutually exclusive
- * so it is NOT possible to build a U-Boot with both NAND and NOR routines.
- * NOR U-Boot is loaded directly from Flash so it must perform all the
- * low level initialization itself. NAND version is loaded by an initial
- * bootloader (UBL in TI-ese) that performs such an initialization so it's
- * skipped in NAND version. The third DaVinci boot mode loads a bootloader
- * via UART0 and that bootloader in turn loads and runs U-Boot (or whatever)
- * performing low level init prior to loading. All that means we can NOT use
- * NAND version to put U-Boot into NOR because it doesn't have NOR support and
- * we can NOT use NOR version because it performs low level initialization
- * effectively destroying itself in DDR memory. That's why a separate NOR
- * version with this define is needed. It is loaded via UART, then one uses
- * it to somehow download a proper NOR version built WITHOUT this define to
- * RAM (tftp?) and burn it to NOR Flash. I would be probably able to squeeze
- * NOR support into the initial bootloader so it won't be needed but DaVinci
- * static RAM might be too small for this (I have something like 2Kbytes left
- * as of now, without NOR support) so this might've not happened...
- *
-#define CONFIG_NOR_UART_BOOT
- */
-
-/*=======*/
-/* Board */
-/*=======*/
-#define SONATA_BOARD
-#define CONFIG_SYS_NAND_SMALLPAGE
-#define CONFIG_SYS_USE_NOR
-#define MACH_TYPE_SONATA 1254
-#define CONFIG_MACH_TYPE MACH_TYPE_SONATA
-/*===================*/
-/* SoC Configuration */
-/*===================*/
-#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
-#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */
-#define CONFIG_SOC_DM644X
-/*====================================================*/
-/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
-/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */
-/*====================================================*/
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
-/*=============*/
-/* Memory Info */
-/*=============*/
-#define CONFIG_SYS_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */
-#define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */
-#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
-#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */
-#define DDR_4BANKS /* 4-bank DDR2 (128MB) */
-/*====================*/
-/* Serial Driver info */
-/*====================*/
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size, byteorder */
-#define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */
-#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */
-#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
-#define CONFIG_BAUDRATE 115200 /* Default baud rate */
-/*===================*/
-/* I2C Configuration */
-/*===================*/
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_DAVINCI
-#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
-/*==================================*/
-/* Network & Ethernet Configuration */
-/*==================================*/
-#define CONFIG_DRIVER_TI_EMAC
-#define CONFIG_MII
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT 10
-/*=====================*/
-/* Flash & Environment */
-/*=====================*/
-#ifdef CONFIG_SYS_USE_NAND
-#define CONFIG_NAND_DAVINCI
-#define CONFIG_SYS_NAND_CS 2
-#undef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_ENV_OVERWRITE /* instead if obsoleted forceenv() */
-#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
-#define CONFIG_ENV_SECT_SIZE 512 /* Env sector Size */
-#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
-#define CONFIG_SYS_NAND_BASE 0x02000000
-#define CONFIG_SYS_NAND_HW_ECC
-#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
-#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
-#elif defined(CONFIG_SYS_USE_NOR)
-#ifdef CONFIG_NOR_UART_BOOT
-#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
-#else
-#undef CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-#define CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_SYS_NO_FLASH
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */
-#define CONFIG_SYS_FLASH_SECT_SZ 0x20000 /* 128KB sect size AMD Flash */
-#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ*2)
-#define CONFIG_ENV_SIZE CONFIG_SYS_FLASH_SECT_SZ
-#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */
-#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */
-#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)
-#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ /* Env sector Size */
-#endif
-/*==============================*/
-/* U-Boot general configuration */
-/*==============================*/
-#define CONFIG_MISC_INIT_R
-#undef CONFIG_BOOTDELAY
-#define CONFIG_BOOTFILE "uImage" /* Boot file name */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buffer sz */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* default Linux kernel load address */
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-/*===================*/
-/* Linux Information */
-/*===================*/
-#define LINUX_BOOT_PARAM_ADDR 0x80000100
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTARGS "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
-#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot; bootm 0x2060000"
-/*=================*/
-/* U-Boot commands */
-/*=================*/
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_EEPROM
-#ifdef CONFIG_SYS_USE_NAND
-#define CONFIG_CMD_NAND
-#elif defined(CONFIG_SYS_USE_NOR)
-#define CONFIG_CMD_JFFS2
-#else
-#error "Either CONFIG_SYS_USE_NAND or CONFIG_SYS_USE_NOR _MUST_ be defined !!!"
-#endif
-
-#ifdef CONFIG_CMD_BDI
-#define CONFIG_CLOCKS
-#endif
-
-#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */