summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2011-09-05 14:37:34 +0200
committerWolfgang Denk <wd@denx.de>2011-09-07 21:46:40 +0200
commit5df092d7816eb59e6549f8332860ad9a3020eacd (patch)
tree045084c3aadc1507ea369acc939d9209f2a6eb01 /include
parent9c62815bf7df98052a225202a06f26fdc4b8c793 (diff)
downloadu-boot-imx-5df092d7816eb59e6549f8332860ad9a3020eacd.zip
u-boot-imx-5df092d7816eb59e6549f8332860ad9a3020eacd.tar.gz
u-boot-imx-5df092d7816eb59e6549f8332860ad9a3020eacd.tar.bz2
ARM: remove broken "shannon" board.
Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Rolf Offermanns <rof@sysgo.de>
Diffstat (limited to 'include')
-rw-r--r--include/configs/shannon.h223
1 files changed, 0 insertions, 223 deletions
diff --git a/include/configs/shannon.h b/include/configs/shannon.h
deleted file mode 100644
index fce4121..0000000
--- a/include/configs/shannon.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * Configuation settings for the Shannon/TuxScreen/IS2630 WebPhone Board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * Since we use the Inferno-Loader to bring us to live,
- * we skip the lowlevel init stuff.
- * But U-Boot still relocates itself into RAM
- */
-#define CONFIG_INFERNO /* we are using the inferno bootldr */
-#define CONFIG_SKIP_LOWLEVEL_INIT 1
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SA1100 1 /* This is an SA1100 CPU */
-#define CONFIG_SHANNON 1 /* on an SHANNON/TuxScreen Board */
-
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_DRIVER_3C589 1
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SA1100_SERIAL
-#define CONFIG_SERIAL3 1 /* we use SERIAL 3 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,115200"
-#define CONFIG_NETMASK 255.255.0.0
-#define CONFIG_BOOTCOMMAND "help"
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "TuxScreen # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0xd0000000 /* default load address */
-
-#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
-#define CONFIG_SYS_CPUSPEED 0x09 /* 190 MHz for Shannon */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-#define CONFIG_DOS_PARTITION 1 /* DOS partitiion support */
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-/* BE CAREFUL */
-#define CONFIG_NR_DRAM_BANKS 4 /* we have 4 banks of EDORAM */
-#define PHYS_SDRAM_1 0xc0000000 /* RAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x00400000 /* 4 MB */
-#define PHYS_SDRAM_2 0xc8000000 /* RAM Bank #2 */
-#define PHYS_SDRAM_2_SIZE 0x00400000 /* 4 MB */
-#define PHYS_SDRAM_3 0xd0000000 /* RAM Bank #3 */
-#define PHYS_SDRAM_3_SIZE 0x00400000 /* 4 MB */
-#define PHYS_SDRAM_4 0xd8000000 /* RAM Bank #4 */
-#define PHYS_SDRAM_4_SIZE 0x00400000 /* 4 MB */
-
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x00400000 /* 4 MB */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT (31+4) /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#ifdef CONFIG_INFERNO
-/* we take the last sector, 128 KB in size, but we only use 16 KB of it for stack reasons */
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x003E0000) /* Addr of Environment Sector */
-#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment */
-#define CONFIG_ENV_SECT_SIZE (128 << 10) /* size of environment sector */
-#else
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000) /* Addr of Environment Sector */
-#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment */
-#endif
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-
-/* we pick the upper one */
-
-#define CONFIG_PCMCIA_SLOT_A
-
-#define CONFIG_SYS_PCMCIA_IO_ADDR (0x20000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR (0x24000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0x2C000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_MEM_ADDR (0x28000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
-
-/* in fact, MEM and ATTRB are swapped - has to be corrected soon in cmd_pcmcia or so */
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-
-#define CONFIG_IDE_PCCARD 1 /* Use IDE with PC Card Adapter */
-
-#undef CONFIG_IDE_PCMCIA /* Direct IDE not supported */
-#undef CONFIG_IDE_LED /* LED for ide not supported */
-#undef CONFIG_IDE_RESET /* reset for ide not supported */
-
-#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-
-/* it's simple, all regs are in I/O space */
-#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_ATTRB_ADDR
-
-/* Offset for data I/O */
-#define CONFIG_SYS_ATA_DATA_OFFSET 0
-
-/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_REG_OFFSET 0
-
-/* Offset for alternate registers */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0
-
-/*-----------------------------------------------------------------------
- */
-
-#endif /* __CONFIG_H */