mpc5xxx: Remove all references to MGT5100

We do not support a processor that never reached a real customer.

Signed-off-by: Detlev Zundel <dzu@denx.de>

19 files changed, 6 insertions, 209 deletions

diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h
index 8c5a742..44befe9 100644
--- a/include/configs/BC3450.h
+++ b/include/configs/BC3450.h
@@ -471,13 +471,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
-# define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
-# define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-# define CONFIG_SYS_HID0_INIT		0
-# define CONFIG_SYS_HID0_FINAL		0
-#endif
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index 5ef0b77..5d3a744 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -30,6 +30,7 @@
  */
 
 #define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200		1	/* (more precisely a MPC5200 CPU) */
 #define CONFIG_ICECUBE		1	/* ... on IceCube board */
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
@@ -47,7 +48,6 @@
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 
-#ifdef CONFIG_MPC5200	/* MPC5100 PCI is not supported yet. */
 /*
  * PCI Mapping:
  * 0x40000000 - 0x4fffffff - PCI Memory
@@ -77,10 +77,6 @@
 #define CONFIG_SYS_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
 
-#else
-#define CONFIG_MII		1
-#endif
-
 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -169,7 +165,6 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
-#if defined(CONFIG_MPC5200)
 /*
  * IPB Bus clocking configuration.
  */
@@ -178,7 +173,6 @@
 #else
 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 #endif
-#endif /* CONFIG_MPC5200 */
 
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
@@ -338,13 +332,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #if defined(CONFIG_LITE5200B)
 #define CONFIG_SYS_CS1_START		CONFIG_SYS_FLASH_BASE
diff --git a/include/configs/PM520.h b/include/configs/PM520.h
index f9687d2..22de207 100644
--- a/include/configs/PM520.h
+++ b/include/configs/PM520.h
@@ -50,7 +50,6 @@
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 
-#ifdef CONFIG_MPC5200	/* MPC5100 PCI is not supported yet. */
 /*
  * PCI Mapping:
  * 0x40000000 - 0x4fffffff - PCI Memory
@@ -75,7 +74,6 @@
 #define CONFIG_SYS_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #undef  CONFIG_NS8382X
 
-#endif
 
 /* Partitions */
 #define CONFIG_DOS_PARTITION
@@ -111,9 +109,7 @@
 #define CONFIG_CMD_SNTP
 #define CONFIG_CMD_USB
 
-#if defined(CONFIG_MPC5200)
 #define CONFIG_CMD_PCI
-#endif
 
 
 /*
@@ -147,12 +143,10 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
-#if defined(CONFIG_MPC5200)
 /*
  * IPB Bus clocking configuration.
  */
 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
-#endif
 /*
  * I2C configuration
  */
@@ -301,13 +295,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #if defined(CONFIG_BOOT_ROM)
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_BOOTROM_BASE
diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index 3438aba..6da18eb 100644
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -430,13 +430,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 2154c78..107bff1 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -633,13 +633,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index 1daa574..7510ab1 100644
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -41,6 +41,7 @@
  */
 
 #define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200		1	/* (more precisely a MPC5200 CPU) */
 #define CONFIG_TOTAL5200	1	/* ... on Total5200 board */
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
@@ -73,7 +74,6 @@
 #define CONFIG_SPLASH_SCREEN
 
 
-#ifdef CONFIG_MPC5200	/* MGT5100 PCI is not supported yet. */
 /*
  * PCI Mapping:
  * 0x40000000 - 0x4fffffff - PCI Memory
@@ -98,12 +98,6 @@
 #define CONFIG_SYS_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
 
-#else	/* MGT5100 */
-
-#define CONFIG_MII		1
-
-#endif
-
 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -127,9 +121,7 @@
  */
 #include <config_cmd_default.h>
 
-#if defined(CONFIG_MPC5200)
-    #define CONFIG_CMD_PCI
-#endif
+#define CONFIG_CMD_PCI
 
 #define CONFIG_CMD_BMP
 #define CONFIG_CMD_EEPROM
@@ -176,12 +168,10 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
-#if defined(CONFIG_MPC5200)
 /*
  * IPB Bus clocking configuration.
  */
 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
-#endif
 
 /*
  * I2C configuration
@@ -326,17 +316,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
-
-#if defined (CONFIG_MGT5100)
-#   define CONFIG_BOARD_EARLY_INIT_R	/* switch from CS_BOOT to CS0 */
-#endif
 
 #if CONFIG_TOTAL5200_REV==1
 #   define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
diff --git a/include/configs/aev.h b/include/configs/aev.h
index 2b4826d..98958a6 100644
--- a/include/configs/aev.h
+++ b/include/configs/aev.h
@@ -362,13 +362,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h
index 52df16a..f7290d6 100644
--- a/include/configs/cpci5200.h
+++ b/include/configs/cpci5200.h
@@ -59,7 +59,6 @@
 #define CONFIG_BAUDRATE		9600	/* ... at 115200 bps */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
-#ifdef CONFIG_MPC5200		/* MPC5100 PCI is not supported yet. */
 /*
  * PCI Mapping:
  * 0x40000000 - 0x4fffffff - PCI Memory
@@ -90,8 +89,6 @@
 #define CONFIG_NS8382X		1
 #endif
 
-#endif
-
 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -169,8 +166,6 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_vxworks0"
 
-#if defined(CONFIG_MPC5200)
-
 #define CONFIG_RTC_M48T35A	1	/* ST Electronics M48 timekeeper */
 #define CONFIG_SYS_NVRAM_BASE_ADDR	0xfd010000
 #define CONFIG_SYS_NVRAM_SIZE		32*1024
@@ -179,7 +174,6 @@
  * IPB Bus clocking configuration.
  */
 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
-#endif
 /*
  * I2C configuration
  */
@@ -303,13 +297,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index a81527e..f9cdcbc 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -261,13 +261,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h
index 14f7826..c5b1565 100644
--- a/include/configs/inka4x0.h
+++ b/include/configs/inka4x0.h
@@ -366,13 +366,8 @@ static inline void tws_data_config_output(unsigned output)
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h
index d0cb1e1..6903b36 100644
--- a/include/configs/ipek01.h
+++ b/include/configs/ipek01.h
@@ -324,13 +324,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START		CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/manroland/mpc5200-common.h b/include/configs/manroland/mpc5200-common.h
index b29ef9b..d25e093 100644
--- a/include/configs/manroland/mpc5200-common.h
+++ b/include/configs/manroland/mpc5200-common.h
@@ -170,13 +170,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h
index 4a93b58..73405ea 100644
--- a/include/configs/mecp5200.h
+++ b/include/configs/mecp5200.h
@@ -63,9 +63,6 @@
 #endif
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
-
-#ifdef CONFIG_MPC5200	/* MPC5100 PCI is not supported yet. */
-
 #define CONFIG_MII
 #if 0 /* test-only !!! */
 #define CONFIG_NET_MULTI	1
@@ -74,10 +71,6 @@
 #define CONFIG_NS8382X		1
 #endif
 
-#else	/* MPC5100 */
-
-#endif
-
 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -152,12 +145,10 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_vxworks0"
 
-#if defined(CONFIG_MPC5200)
 /*
  * IPB Bus clocking configuration.
  */
 #undef CONFIG_SYS_IPBSPEED_133			/* define for 133MHz speed */
-#endif
 /*
  * I2C configuration
  */
@@ -288,13 +279,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h
index 18e7cc2..bdc0f79 100644
--- a/include/configs/o2dnt.h
+++ b/include/configs/o2dnt.h
@@ -138,7 +138,6 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
-#if defined(CONFIG_MPC5200)
 /*
  * IPB Bus clocking configuration.
  */
@@ -154,7 +153,6 @@
  */
 #define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
 #endif
-#endif
 
 /*
  * I2C configuration
@@ -276,13 +274,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h
index 8ca55d7..80a0bc6 100644
--- a/include/configs/pf5200.h
+++ b/include/configs/pf5200.h
@@ -61,7 +61,6 @@
 #endif
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
-#ifdef CONFIG_MPC5200		/* MPC5100 PCI is not supported yet. */
 /*
  * PCI Mapping:
  * 0x40000000 - 0x4fffffff - PCI Memory
@@ -87,7 +86,6 @@
 #define CONFIG_SYS_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
 #define CONFIG_NS8382X		1
 #endif
-#endif
 
 /* Partitions */
 #define CONFIG_MAC_PARTITION
@@ -121,9 +119,7 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_IDE
 
-#ifdef CONFIG_MPC5200
 #define CONFIG_CMD_PCI
-#endif
 
 
 #if (TEXT_BASE == 0xFF000000)	/* Boot low with 16 MB Flash */
@@ -166,12 +162,10 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_vxworks0"
 
-#if defined(CONFIG_MPC5200)
 /*
  * IPB Bus clocking configuration.
  */
 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
-#endif
 /*
  * I2C configuration
  */
@@ -289,13 +283,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h
index 5a2ef3a..060026b 100644
--- a/include/configs/smmaco4.h
+++ b/include/configs/smmaco4.h
@@ -358,13 +358,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index 27dda25..d377e19 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -438,13 +438,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index 92bcdb3..d462ed0 100644
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -170,12 +170,10 @@
 
 #define CONFIG_BOOTCOMMAND	"run net_nfs"
 
-#if defined(CONFIG_MPC5200)
 /*
  * IPB Bus clocking configuration.
  */
 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK			/* define for 133MHz speed */
-#endif
 
 /*
  * I2C configuration
diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h
index 4dcf90c..2d343c7 100644
--- a/include/mpc5xxx.h
+++ b/include/mpc5xxx.h
@@ -1,7 +1,7 @@
 /*
  * include/asm-ppc/mpc5xxx.h
  *
- * Prototypes, etc. for the Motorola MGT5xxx/MPC5xxx
+ * Prototypes, etc. for the Motorola MPC5xxx
  * embedded cpu chips
  *
  * 2003 (c) MontaVista, Software, Inc.
@@ -33,24 +33,15 @@
 #include <asm/types.h>
 
 /* Processor name */
-#if defined(CONFIG_MPC5200)
 #define CPU_ID_STR	"MPC5200"
-#elif defined(CONFIG_MGT5100)
-#define CPU_ID_STR	"MGT5100"
-#endif
 
 /* Exception offsets (PowerPC standard) */
 #define EXC_OFF_SYS_RESET	0x0100
 #define _START_OFFSET		EXC_OFF_SYS_RESET
 
 /* useful macros for manipulating CSx_START/STOP */
-#if defined(CONFIG_MGT5100)
-#define START_REG(start)	((start) >> 15)
-#define STOP_REG(start, size)	(((start) + (size) - 1) >> 15)
-#elif defined(CONFIG_MPC5200)
 #define START_REG(start)	((start) >> 16)
 #define STOP_REG(start, size)	(((start) + (size) - 1) >> 16)
-#endif
 
 /* Internal memory map */
 
@@ -70,21 +61,12 @@
 #define MPC5XXX_BOOTCS_STOP	(CONFIG_SYS_MBAR + 0x0050)
 #define MPC5XXX_ADDECR		(CONFIG_SYS_MBAR + 0x0054)
 
-#if defined(CONFIG_MGT5100)
-#define MPC5XXX_SDRAM_START	(CONFIG_SYS_MBAR + 0x0034)
-#define MPC5XXX_SDRAM_STOP	(CONFIG_SYS_MBAR + 0x0038)
-#define MPC5XXX_PCI1_START	(CONFIG_SYS_MBAR + 0x003c)
-#define MPC5XXX_PCI1_STOP	(CONFIG_SYS_MBAR + 0x0040)
-#define MPC5XXX_PCI2_START	(CONFIG_SYS_MBAR + 0x0044)
-#define MPC5XXX_PCI2_STOP	(CONFIG_SYS_MBAR + 0x0048)
-#elif defined(CONFIG_MPC5200)
 #define MPC5XXX_CS6_START	(CONFIG_SYS_MBAR + 0x0058)
 #define MPC5XXX_CS6_STOP	(CONFIG_SYS_MBAR + 0x005c)
 #define MPC5XXX_CS7_START	(CONFIG_SYS_MBAR + 0x0060)
 #define MPC5XXX_CS7_STOP	(CONFIG_SYS_MBAR + 0x0064)
 #define MPC5XXX_SDRAM_CS0CFG	(CONFIG_SYS_MBAR + 0x0034)
 #define MPC5XXX_SDRAM_CS1CFG	(CONFIG_SYS_MBAR + 0x0038)
-#endif
 
 #define MPC5XXX_SDRAM		(CONFIG_SYS_MBAR + 0x0100)
 #define MPC5XXX_CDM		(CONFIG_SYS_MBAR + 0x0200)
@@ -99,18 +81,12 @@
 #define MPC5XXX_SDMA		(CONFIG_SYS_MBAR + 0x1200)
 #define MPC5XXX_XLBARB		(CONFIG_SYS_MBAR + 0x1f00)
 
-#if defined(CONFIG_MGT5100)
-#define	MPC5XXX_PSC1		(CONFIG_SYS_MBAR + 0x2000)
-#define	MPC5XXX_PSC2		(CONFIG_SYS_MBAR + 0x2400)
-#define	MPC5XXX_PSC3		(CONFIG_SYS_MBAR + 0x2800)
-#elif defined(CONFIG_MPC5200)
 #define	MPC5XXX_PSC1		(CONFIG_SYS_MBAR + 0x2000)
 #define	MPC5XXX_PSC2		(CONFIG_SYS_MBAR + 0x2200)
 #define	MPC5XXX_PSC3		(CONFIG_SYS_MBAR + 0x2400)
 #define	MPC5XXX_PSC4		(CONFIG_SYS_MBAR + 0x2600)
 #define	MPC5XXX_PSC5		(CONFIG_SYS_MBAR + 0x2800)
 #define	MPC5XXX_PSC6		(CONFIG_SYS_MBAR + 0x2c00)
-#endif
 
 #define	MPC5XXX_FEC		(CONFIG_SYS_MBAR + 0x3000)
 #define MPC5XXX_ATA             (CONFIG_SYS_MBAR + 0x3A00)
@@ -118,22 +94,14 @@
 #define MPC5XXX_I2C1		(CONFIG_SYS_MBAR + 0x3D00)
 #define MPC5XXX_I2C2		(CONFIG_SYS_MBAR + 0x3D40)
 
-#if defined(CONFIG_MGT5100)
-#define MPC5XXX_SRAM		(CONFIG_SYS_MBAR + 0x4000)
-#define MPC5XXX_SRAM_SIZE	(8*1024)
-#elif defined(CONFIG_MPC5200)
 #define MPC5XXX_SRAM		(CONFIG_SYS_MBAR + 0x8000)
 #define MPC5XXX_SRAM_SIZE	(16*1024)
-#endif
 
 /* SDRAM Controller */
 #define MPC5XXX_SDRAM_MODE	(MPC5XXX_SDRAM + 0x0000)
 #define MPC5XXX_SDRAM_CTRL	(MPC5XXX_SDRAM + 0x0004)
 #define MPC5XXX_SDRAM_CONFIG1	(MPC5XXX_SDRAM + 0x0008)
 #define MPC5XXX_SDRAM_CONFIG2	(MPC5XXX_SDRAM + 0x000c)
-#if defined(CONFIG_MGT5100)
-#define MPC5XXX_SDRAM_XLBSEL	(MPC5XXX_SDRAM + 0x0010)
-#endif
 #define MPC5XXX_SDRAM_SDELAY	(MPC5XXX_SDRAM + 0x0090)
 
 /* Clock Distribution Module */
@@ -155,19 +123,15 @@
 #define MPC5XXX_BOOTCS_CFG	MPC5XXX_CS0_CFG
 #define MPC5XXX_CS_CTRL		(MPC5XXX_LPB + 0x0018)
 #define MPC5XXX_CS_STATUS	(MPC5XXX_LPB + 0x001c)
-#if defined(CONFIG_MPC5200)
 #define MPC5XXX_CS6_CFG		(MPC5XXX_LPB + 0x0020)
 #define MPC5XXX_CS7_CFG		(MPC5XXX_LPB + 0x0024)
 #define MPC5XXX_CS_BURST	(MPC5XXX_LPB + 0x0028)
 #define MPC5XXX_CS_DEADCYCLE	(MPC5XXX_LPB + 0x002c)
-#endif
 
-#if defined(CONFIG_MPC5200)
 /* XLB Arbiter registers */
 #define MPC5XXX_XLBARB_CFG		(MPC5XXX_XLBARB + 0x40)
 #define MPC5XXX_XLBARB_MPRIEN	(MPC5XXX_XLBARB + 0x64)
 #define MPC5XXX_XLBARB_MPRIVAL	(MPC5XXX_XLBARB + 0x68)
-#endif
 
 /* GPIO registers */
 #define MPC5XXX_GPS_PORT_CONFIG	(MPC5XXX_GPIO + 0x0000)
@@ -242,14 +206,6 @@
 #define MPC5XXX_PCI_CFG		(MPC5XXX_PCI + 0x0c)
 #define MPC5XXX_PCI_BAR0	(MPC5XXX_PCI + 0x10)
 #define MPC5XXX_PCI_BAR1	(MPC5XXX_PCI + 0x14)
-#if defined(CONFIG_MGT5100)
-#define MPC5XXX_PCI_CTRL	(MPC5XXX_PCI + 0x68)
-#define MPC5XXX_PCI_VALMSKR	(MPC5XXX_PCI + 0x6c)
-#define MPC5XXX_PCI_VALMSKW	(MPC5XXX_PCI + 0x70)
-#define MPC5XXX_PCI_SUBW1	(MPC5XXX_PCI + 0x74)
-#define MPC5XXX_PCI_SUBW2	(MPC5XXX_PCI + 0x78)
-#define MPC5XXX_PCI_WINCOMMAND	(MPC5XXX_PCI + 0x7c)
-#elif defined(CONFIG_MPC5200)
 #define MPC5XXX_PCI_GSCR	(MPC5XXX_PCI + 0x60)
 #define MPC5XXX_PCI_TBATR0	(MPC5XXX_PCI + 0x64)
 #define MPC5XXX_PCI_TBATR1	(MPC5XXX_PCI + 0x68)
@@ -262,7 +218,6 @@
 #define MPC5XXX_PCI_ISR		(MPC5XXX_PCI + 0x88)
 #define MPC5XXX_PCI_ARB		(MPC5XXX_PCI + 0x8c)
 #define MPC5XXX_PCI_CAR		(MPC5XXX_PCI + 0xf8)
-#endif
 
 /* Interrupt Controller registers */
 #define MPC5XXX_ICTL_PER_MASK	(MPC5XXX_ICTL + 0x0000)
@@ -495,31 +450,16 @@ struct mpc5xxx_mmap_ctl {
 	volatile u32	cs4_stop;
 	volatile u32	cs5_start;	/* 0x002c */
 	volatile u32	cs5_stop;
-#if defined(CONFIG_MGT5100)
-	volatile u32	sdram_start;	/* 0x0034 */
-	volatile u32	sdram_stop;	/* 0x0038 */
-	volatile u32	pci1_start;	/* 0x003c */
-	volatile u32	pci1_stop;	/* 0x0040 */
-	volatile u32	pci2_start;	/* 0x0044 */
-	volatile u32	pci2_stop;	/* 0x0048 */
-#elif defined(CONFIG_MPC5200)
 	volatile u32	sdram0;		/* 0x0034 */
 	volatile u32	sdram1;		/* 0x0038 */
 	volatile u32	dummy1[4];	/* 0x003c */
-#endif
 	volatile u32	boot_start;	/* 0x004c */
 	volatile u32	boot_stop;
-#if defined(CONFIG_MGT5100)
-	volatile u32	addecr;		/* 0x0054 */
-#elif defined(CONFIG_MPC5200)
 	volatile u32	ipbi_ws_ctrl;	/* 0x0054 */
-#endif
-#if defined(CONFIG_MPC5200)
 	volatile u32	cs6_start;	/* 0x0058 */
 	volatile u32	cs6_stop;
 	volatile u32	cs7_start;	/* 0x0060 */
 	volatile u32	cs7_stop;
-#endif
 };
 
 /* Clock distribution module */
@@ -546,12 +486,7 @@ struct mpc5xxx_sdram {
 	volatile u32	ctrl;
 	volatile u32	config1;
 	volatile u32	config2;
-#if defined(CONFIG_MGT5100)
-	volatile u32	xlbsel;
-	volatile u32    dummy[31];
-#else
 	volatile u32	dummy[32];
-#endif
 	volatile u32	sdelay;
 };
 
@@ -564,12 +499,10 @@ struct mpc5xxx_lpb {
 	volatile u32	cs5_cfg;
 	volatile u32	cs_ctrl;
 	volatile u32	cs_status;
-#if defined(CONFIG_MPC5200)
 	volatile u32	cs6_cfg;
 	volatile u32	cs7_cfg;
 	volatile u32	cs_burst;
 	volatile u32	cs_deadcycle;
-#endif
 };