Merge branch 'master' of git://git.denx.de/u-boot-blackfin

21 files changed, 205 insertions, 58 deletions

diff --git a/include/configs/bf518f-ezbrd.h b/include/configs/bf518f-ezbrd.h
index 1e821d9..6eec1c9 100644
--- a/include/configs/bf518f-ezbrd.h
+++ b/include/configs/bf518f-ezbrd.h
@@ -63,6 +63,26 @@
 #if !defined(__ADSPBF512__) && !defined(__ADSPBF514__)
 #define ADI_CMDS_NETWORK	1
 #define CONFIG_BFIN_MAC
+#define CONFIG_BFIN_MAC_PINS \
+	{ \
+	P_MII0_ETxD0, \
+	P_MII0_ETxD1, \
+	P_MII0_ETxD2, \
+	P_MII0_ETxD3, \
+	P_MII0_ETxEN, \
+	P_MII0_TxCLK, \
+	P_MII0_PHYINT, \
+	P_MII0_COL, \
+	P_MII0_ERxD0, \
+	P_MII0_ERxD1, \
+	P_MII0_ERxD2, \
+	P_MII0_ERxD3, \
+	P_MII0_ERxDV, \
+	P_MII0_ERxCLK, \
+	P_MII0_CRS, \
+	P_MII0_MDC, \
+	P_MII0_MDIO, \
+	0 }
 #define CONFIG_NETCONSOLE	1
 #define CONFIG_NET_MULTI	1
 #endif
@@ -117,8 +137,6 @@
  */
 #define CONFIG_BFIN_TWI_I2C	1
 #define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_SPEED	50000
-#define CONFIG_SYS_I2C_SLAVE	0
 
 
 /*
diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h
index 711fa27..82396d0 100644
--- a/include/configs/bf526-ezbrd.h
+++ b/include/configs/bf526-ezbrd.h
@@ -134,8 +134,6 @@
  */
 #define CONFIG_BFIN_TWI_I2C	1
 #define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_SPEED	50000
-#define CONFIG_SYS_I2C_SLAVE	0
 
 
 /*
@@ -160,23 +158,19 @@
 /* define to enable run status via led */
 /* #define CONFIG_STATUS_LED */
 #ifdef CONFIG_STATUS_LED
+#define CONFIG_GPIO_LED
 #define CONFIG_BOARD_SPECIFIC_LED
-#ifndef __ASSEMBLY__
-typedef unsigned int led_id_t;
-void __led_init(led_id_t mask, int state);
-void __led_set(led_id_t mask, int state);
-void __led_toggle(led_id_t mask);
-#endif
 /* use LED0 to indicate booting/alive */
 #define STATUS_LED_BOOT 0
-#define STATUS_LED_BIT 1
+#define STATUS_LED_BIT GPIO_PF8
 #define STATUS_LED_STATE STATUS_LED_ON
 #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4)
 /* use LED1 to indicate crash */
 #define STATUS_LED_CRASH 1
-#define STATUS_LED_BIT1 2
+#define STATUS_LED_BIT1 GPIO_PG11
 #define STATUS_LED_STATE1 STATUS_LED_ON
 #define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
+/* #define STATUS_LED_BIT2 GPIO_PG12 */
 #endif
 
 
diff --git a/include/configs/bf527-ad7160-eval.h b/include/configs/bf527-ad7160-eval.h
new file mode 100644
index 0000000..eb3a2b7
--- /dev/null
+++ b/include/configs/bf527-ad7160-eval.h
@@ -0,0 +1,148 @@
+/*
+ * U-boot - Configuration file for BF527 AD7160-EVAL board
+ */
+
+#ifndef __CONFIG_BF527_AD7160_EVAL_H__
+#define __CONFIG_BF527_AD7160_EVAL_H__
+
+#include <asm/config-pre.h>
+
+
+/*
+ * Processor Settings
+ */
+#define CONFIG_BFIN_CPU             bf527-0.2
+#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_SPI_MASTER
+
+
+/*
+ * Clock Settings
+ *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
+ *	SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
+ */
+/* CONFIG_CLKIN_HZ is any value in Hz					*/
+#define CONFIG_CLKIN_HZ			24000000
+/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
+/*                                                1 = CLKIN / 2		*/
+#define CONFIG_CLKIN_HALF		0
+/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass	*/
+/*                                                1 = bypass PLL	*/
+#define CONFIG_PLL_BYPASS		0
+/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
+/* Values can range from 0-63 (where 0 means 64)			*/
+#define CONFIG_VCO_MULT			25
+/* CCLK_DIV controls the core clock divider				*/
+/* Values can be 1, 2, 4, or 8 ONLY					*/
+#define CONFIG_CCLK_DIV			1
+/* SCLK_DIV controls the system clock divider				*/
+/* Values can range from 1-15						*/
+#define CONFIG_SCLK_DIV			5
+
+
+/*
+ * Memory Settings
+ */
+#define CONFIG_MEM_ADD_WDTH	10
+#define CONFIG_MEM_SIZE		64
+
+#define CONFIG_EBIU_SDRRC_VAL	0x03F6
+#define CONFIG_EBIU_SDGCTL_VAL	(SCTLE | CL_3 | PASR_ALL | TRAS_6 | TRP_3 | TRCD_3 | TWR_2 | PSS)
+
+#define CONFIG_EBIU_AMGCTL_VAL	(AMCKEN | AMBEN_ALL)
+#define CONFIG_EBIU_AMBCTL0_VAL	(B1WAT_15 | B1RAT_15 | B1HT_3 | B1RDYPOL | B0WAT_15 | B0RAT_15 | B0HT_3 | B0RDYPOL)
+#define CONFIG_EBIU_AMBCTL1_VAL	(B3WAT_15 | B3RAT_15 | B3HT_3 | B3RDYPOL | B2WAT_15 | B2RAT_15 | B2HT_3 | B2RDYPOL)
+
+#define CONFIG_SYS_MONITOR_LEN	(768 * 1024)
+#define CONFIG_SYS_MALLOC_LEN	(640 * 1024)
+
+
+/*
+ * NAND Settings
+ * (can't be used same time as ethernet)
+ */
+#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
+# define CONFIG_BFIN_NFC
+# define CONFIG_BFIN_NFC_BOOTROM_ECC
+#endif
+#ifdef CONFIG_BFIN_NFC
+#define CONFIG_BFIN_NFC_CTL_VAL	0x0033
+#define CONFIG_DRIVER_NAND_BFIN
+#define CONFIG_SYS_NAND_BASE		0 /* not actually used */
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define NAND_MAX_CHIPS		1
+#endif
+
+
+/*
+ * Flash Settings
+ */
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_BASE		0x20000000
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_SECT	259
+
+
+/*
+ * SPI Settings
+ */
+#define CONFIG_BFIN_SPI
+#define CONFIG_ENV_SPI_MAX_HZ	30000000
+#define CONFIG_SF_DEFAULT_SPEED	30000000
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+
+
+/*
+ * Env Storage Settings
+ */
+#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_OFFSET	0x10000
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_SECT_SIZE	0x10000
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
+#elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET	0x40000
+#define CONFIG_ENV_SIZE		0x20000
+#else
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OFFSET	0x4000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_SECT_SIZE	0x2000
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
+#endif
+
+
+/*
+ * I2C Settings
+ */
+#define CONFIG_BFIN_TWI_I2C	1
+#define CONFIG_HARD_I2C		1
+
+
+/*
+ * SPI_MMC Settings
+ */
+#define CONFIG_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_SPI_MMC
+#define CONFIG_SPI_MMC_DEFAULT_CS (7 + GPIO_PH3)
+
+
+/*
+ * Misc Settings
+ */
+#define CONFIG_MISC_INIT_R
+#define CONFIG_UART_CONSOLE	0
+
+
+/*
+ * Pull in common ADI header for remaining command/environment setup
+ */
+#include <configs/bfin_adi_common.h>
+
+#endif
diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h
index 7800c32..07e4ce8 100644
--- a/include/configs/bf527-ezkit.h
+++ b/include/configs/bf527-ezkit.h
@@ -138,8 +138,6 @@
  */
 #define CONFIG_BFIN_TWI_I2C	1
 #define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_SPEED	50000
-#define CONFIG_SYS_I2C_SLAVE	0
 
 
 /*
diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h
index c80ddca..37a7059 100644
--- a/include/configs/bf533-ezkit.h
+++ b/include/configs/bf533-ezkit.h
@@ -136,8 +136,6 @@
 	} while (0)
 #define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
 
-#define CONFIG_SYS_I2C_SPEED		50000
-#define CONFIG_SYS_I2C_SLAVE		0
 #endif
 
 
diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h
index 80c4884..02c8bc3 100644
--- a/include/configs/bf533-stamp.h
+++ b/include/configs/bf533-stamp.h
@@ -180,8 +180,6 @@
 	} while (0)
 #define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
 
-#define CONFIG_SYS_I2C_SPEED		50000
-#define CONFIG_SYS_I2C_SLAVE		0
 #endif
 
 
@@ -230,23 +228,19 @@
 /* define to enable run status via led */
 /* #define CONFIG_STATUS_LED */
 #ifdef CONFIG_STATUS_LED
+#define CONFIG_GPIO_LED
 #define CONFIG_BOARD_SPECIFIC_LED
-#ifndef __ASSEMBLY__
-typedef unsigned int led_id_t;
-void __led_init(led_id_t mask, int state);
-void __led_set(led_id_t mask, int state);
-void __led_toggle(led_id_t mask);
-#endif
-/* use LED1 to indicate booting/alive */
+/* use LED0 to indicate booting/alive */
 #define STATUS_LED_BOOT 0
-#define STATUS_LED_BIT 1
+#define STATUS_LED_BIT GPIO_PF2
 #define STATUS_LED_STATE STATUS_LED_ON
 #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4)
-/* use LED2 to indicate crash */
+/* use LED1 to indicate crash */
 #define STATUS_LED_CRASH 1
-#define STATUS_LED_BIT1 2
+#define STATUS_LED_BIT1 GPIO_PF3
 #define STATUS_LED_STATE1 STATUS_LED_ON
 #define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
+/* #define STATUS_LED_BIT2 GPIO_PF4 */
 #endif
 
 /* define to enable splash screen support */
diff --git a/include/configs/bf537-pnav.h b/include/configs/bf537-pnav.h
index 73ad95e..39bbb41 100644
--- a/include/configs/bf537-pnav.h
+++ b/include/configs/bf537-pnav.h
@@ -148,8 +148,6 @@
  */
 #define CONFIG_BFIN_TWI_I2C	1
 #define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_SPEED		50000
-#define CONFIG_SYS_I2C_SLAVE		0
 
 
 /*
diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index 64e86d6..96704d7 100644
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -137,8 +137,6 @@
  */
 #define CONFIG_BFIN_TWI_I2C	1
 #define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_SPEED	50000
-#define CONFIG_SYS_I2C_SLAVE	0
 
 
 /*
@@ -261,8 +259,6 @@
 #define CONFIG_RTC_BFIN
 #define CONFIG_UART_CONSOLE	0
 
-/* #define CONFIG_BF537_STAMP_LEDCMD	1 */
-
 /* Define if want to do post memory test */
 #undef CONFIG_POST
 #ifdef CONFIG_POST
diff --git a/include/configs/bf538f-ezkit.h b/include/configs/bf538f-ezkit.h
index 59e0565..1c14b6b 100644
--- a/include/configs/bf538f-ezkit.h
+++ b/include/configs/bf538f-ezkit.h
@@ -134,8 +134,6 @@
  */
 #define CONFIG_BFIN_TWI_I2C	1
 #define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_SPEED	50000
-#define CONFIG_SYS_I2C_SLAVE	0
 
 
 /*
diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h
index f9c9711..60cca0c 100644
--- a/include/configs/bf548-ezkit.h
+++ b/include/configs/bf548-ezkit.h
@@ -140,8 +140,6 @@
  */
 #define CONFIG_BFIN_TWI_I2C	1
 #define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_SPEED	50000
-#define CONFIG_SYS_I2C_SLAVE	0
 
 
 /*
diff --git a/include/configs/bf561-acvilon.h b/include/configs/bf561-acvilon.h
index ed8d944..0c0204f 100644
--- a/include/configs/bf561-acvilon.h
+++ b/include/configs/bf561-acvilon.h
@@ -131,7 +131,6 @@
 #define CONFIG_ENV_SECT_SIZE		(1056 * 8)
 #define CONFIG_ENV_OFFSET			((16 + 256) * 1056)
 #define CONFIG_ENV_SIZE				(8 * 1056)
-#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 
 
 /*
diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h
index 1e3fdef..036bfe4 100644
--- a/include/configs/bf561-ezkit.h
+++ b/include/configs/bf561-ezkit.h
@@ -151,8 +151,6 @@
 	} while (0)
 #define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
 
-#define CONFIG_SYS_I2C_SPEED		50000
-#define CONFIG_SYS_I2C_SLAVE		0
 #endif
 
 
diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h
index 1896cf5..901a32f 100644
--- a/include/configs/bfin_adi_common.h
+++ b/include/configs/bfin_adi_common.h
@@ -83,6 +83,7 @@
 # define CONFIG_CMD_CPLBINFO
 # define CONFIG_CMD_ELF
 # define CONFIG_ELF_SIMPLE_LOAD
+# define CONFIG_CMD_GPIO
 # define CONFIG_CMD_KGDB
 # define CONFIG_CMD_REGINFO
 # define CONFIG_CMD_STRINGS
@@ -247,12 +248,26 @@
 #   define CONFIG_SYS_AUTOLOAD "no"
 #  endif
 # endif
+# define CONFIG_IP_DEFRAG
 # define CONFIG_NET_RETRY_COUNT 20
 #endif
 
 /*
+ * I2C Settings
+ */
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+# ifndef CONFIG_SYS_I2C_SPEED
+#  define CONFIG_SYS_I2C_SPEED 50000
+# endif
+# ifndef CONFIG_SYS_I2C_SLAVE
+#  define CONFIG_SYS_I2C_SLAVE 0
+# endif
+#endif
+
+/*
  * Misc Settings
  */
+#define CONFIG_BFIN_SPI_GPIO_CS /* Only matters if BFIN_SPI is enabled */
 #define CONFIG_LZMA
 
 #endif
diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h
index ad1dd12..e0c6d53 100644
--- a/include/configs/cm-bf527.h
+++ b/include/configs/cm-bf527.h
@@ -117,8 +117,6 @@
  */
 #define CONFIG_BFIN_TWI_I2C	1
 #define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_SPEED	50000
-#define CONFIG_SYS_I2C_SLAVE	0
 
 
 /*
diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h
index 8d0bc12..742df9c 100644
--- a/include/configs/cm-bf537e.h
+++ b/include/configs/cm-bf537e.h
@@ -119,8 +119,6 @@
  */
 #define CONFIG_BFIN_TWI_I2C	1
 #define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_SPEED	50000
-#define CONFIG_SYS_I2C_SLAVE	0
 
 
 /*
diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h
index bbea3ab..9def99f 100644
--- a/include/configs/cm-bf537u.h
+++ b/include/configs/cm-bf537u.h
@@ -120,8 +120,6 @@
  */
 #define CONFIG_BFIN_TWI_I2C	1
 #define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_SPEED	50000
-#define CONFIG_SYS_I2C_SLAVE	0
 
 
 /*
diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h
index 93c4c8d..63b9399 100644
--- a/include/configs/cm-bf548.h
+++ b/include/configs/cm-bf548.h
@@ -107,8 +107,6 @@
  */
 #define CONFIG_BFIN_TWI_I2C	1
 #define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_SPEED	50000
-#define CONFIG_SYS_I2C_SLAVE	0
 
 
 /*
diff --git a/include/configs/ibf-dsp561.h b/include/configs/ibf-dsp561.h
index 2eef5ef..2c0a263 100644
--- a/include/configs/ibf-dsp561.h
+++ b/include/configs/ibf-dsp561.h
@@ -58,6 +58,18 @@
 
 
 /*
+ * Network Settings
+ */
+#define ADI_CMDS_NETWORK	1
+#define CONFIG_NET_MULTI
+#define CONFIG_DRIVER_AX88180	1
+#define AX88180_BASE		0x2c000000
+#define CONFIG_HOSTNAME		ibf-dsp561
+/* Uncomment next line to use fixed MAC address */
+/* #define CONFIG_ETHADDR	02:80:ad:20:31:e8 */
+
+
+/*
  * Flash Settings
  */
 #define CONFIG_SYS_FLASH_CFI		/* The flash is CFI compatible */
@@ -126,8 +138,6 @@
 	} while (0)
 #define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
 
-#define CONFIG_SYS_I2C_SPEED	50000
-#define CONFIG_SYS_I2C_SLAVE	0
 #endif
 
 
diff --git a/include/configs/tcm-bf518.h b/include/configs/tcm-bf518.h
index 9c04d8a..52055e8 100644
--- a/include/configs/tcm-bf518.h
+++ b/include/configs/tcm-bf518.h
@@ -106,8 +106,6 @@
  */
 #define CONFIG_BFIN_TWI_I2C	1
 #define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_SPEED	50000
-#define CONFIG_SYS_I2C_SLAVE	0
 
 
 /*
diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h
index 409a042..24ce8f8 100644
--- a/include/configs/tcm-bf537.h
+++ b/include/configs/tcm-bf537.h
@@ -120,8 +120,6 @@
  */
 #define CONFIG_BFIN_TWI_I2C	1
 #define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_SPEED	50000
-#define CONFIG_SYS_I2C_SLAVE	0
 
 
 /*
diff --git a/include/status_led.h b/include/status_led.h
index 9dbf01f..f213595 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -346,9 +346,6 @@ void status_led_set  (int led, int state);
 #elif defined(CONFIG_NIOS2)
 /* XXX empty just to avoid the error */
 /************************************************************************/
-#elif defined(CONFIG_BLACKFIN)
-/* XXX empty just to avoid the error */
-/************************************************************************/
 #elif defined(CONFIG_V38B)
 
 # define STATUS_LED_BIT		0x0010			/* Timer7 GPIO */