Merge branch 'master' of git://git.denx.de/u-boot-atmel

3 files changed, 432 insertions, 4 deletions

diff --git a/include/configs/ma5d4evk.h b/include/configs/ma5d4evk.h
new file mode 100644
index 0000000..f0d5e9d
--- /dev/null
+++ b/include/configs/ma5d4evk.h
@@ -0,0 +1,255 @@
+/*
+ * DENX MA5D4 configuration
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __MA5D4EVK_CONFIG_H__
+#define __MA5D4EVK_CONFIG_H__
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_FIT
+
+#define CONFIG_TIMESTAMP		/* Print image info with timestamp */
+
+#include "at91-sama5_common.h"
+#undef CONFIG_BOOTARGS
+#define CONFIG_SYS_USE_SERIALFLASH	1
+
+/*
+ * U-Boot Commands
+ */
+#define CONFIG_DOS_PARTITION
+#define CONFIG_FAT_WRITE
+/*#define CONFIG_LCD*/
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC
+#define CONFIG_CMD_GREPENV
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_USB
+
+/*
+ * Memory configurations
+ */
+#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
+#define CONFIG_SYS_SDRAM_SIZE		0x10000000
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_INIT_SP_ADDR		0x210000
+#else
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+#endif
+
+/*
+ * Environment
+ */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+#define CONFIG_ENV_OFFSET		0x8000
+#define CONFIG_ENV_SIZE			0x4000
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
+#define CONFIG_ENV_SECT_SIZE		0x1000
+
+/*
+ * U-Boot general configurations
+ */
+#define CONFIG_VERSION_VARIABLE			/* U-BOOT version */
+
+/*
+ * Serial Driver
+ */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE		ATMEL_BASE_USART0
+#define CONFIG_USART_ID			ATMEL_ID_USART0
+
+/*
+ * Ethernet
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_NET_RETRY_COUNT		20
+#define CONFIG_MACB_SEARCH_PHY
+#define CONFIG_ARP_TIMEOUT		200UL
+#define CONFIG_IP_DEFRAG
+#endif
+
+/*
+ * LCD
+ */
+#ifdef CONFIG_LCD
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_16BPP
+#define CONFIG_BMP_24BPP
+#define CONFIG_BMP_32BPP
+#define LCD_BPP				LCD_COLOR16
+#define LCD_OUTPUT_BPP                  24
+#define CONFIG_ATMEL_HLCD
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#endif
+
+/*
+ * SD/MMC
+ */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#endif
+
+/*
+ * SPI NOR (boot memory)
+ */
+#ifdef CONFIG_CMD_SF
+#define CONFIG_ATMEL_SPI
+#define CONFIG_ATMEL_SPI0
+#define CONFIG_SPI_FLASH_ATMEL
+#define CONFIG_SF_DEFAULT_BUS		0
+#define CONFIG_SF_DEFAULT_CS		0
+#define CONFIG_SF_DEFAULT_SPEED		30000000
+#endif
+
+/*
+ * USB
+ */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_ATMEL
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
+#define CONFIG_USB_STORAGE
+
+/* USB device */
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_ATMEL_USBA
+#define CONFIG_USB_ETHER
+#define CONFIG_USB_ETH_RNDIS
+#define CONFIG_USBNET_MANUFACTURER      "DENX"
+#endif
+
+/*
+ * Boot Linux
+ */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTFILE		"fitImage"
+#define CONFIG_BOOTARGS		"console=ttyS3,115200"
+#define CONFIG_LOADADDR		0x20800000
+#define CONFIG_BOOTCOMMAND	"run mmc_mmc"
+#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
+#define CONFIG_OF_LIBFDT
+
+/*
+ * Extra Environments
+ */
+#define CONFIG_PREBOOT		"run try_bootscript"
+#define CONFIG_HOSTNAME		ma5d4evk
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"consdev=ttyS3\0"						\
+	"baudrate=115200\0"						\
+	"bootscript=boot.scr\0"						\
+	"bootdev=/dev/mmcblk1p1\0"					\
+	"bootpart=1:1\0"						\
+	"rootdev=/dev/mmcblk1p2\0"					\
+	"netdev=eth0\0"							\
+	"kernel_addr_r=0x22000000\0"					\
+	"update_spi_firmware_spl_addr=0x21000000\0"			\
+	"update_spi_firmware_spl_filename=boot.bin\0"			\
+	"update_spi_firmware_addr=0x22000000\0"				\
+	"update_spi_firmware_filename=u-boot.img\0"			\
+	"update_spi_firmware="	/* Update the SPI flash firmware */	\
+		"if sf probe ; then "					\
+		"if tftp ${update_spi_firmware_spl_addr} "		\
+			"${update_spi_firmware_spl_filename} ; then "	\
+		"setenv update_spi_firmware_spl_filesize ${filesize} ; "\
+		"if tftp ${update_spi_firmware_addr} "			\
+			"${update_spi_firmware_filename} ; then "	\
+		"setenv update_spi_firmware_filesize ${filesize} ; "	\
+		"sf update ${update_spi_firmware_spl_addr} 0x0 "	\
+			"${update_spi_firmware_spl_filesize} ; "	\
+		"sf update ${update_spi_firmware_addr} 0x10000 "	\
+			"${update_spi_firmware_filesize} ; "		\
+		"fi ; "							\
+		"fi ; "							\
+		"fi\0"							\
+	"addcons="							\
+		"setenv bootargs ${bootargs} "				\
+		"console=${consdev},${baudrate}\0"			\
+	"addip="							\
+		"setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
+			"${netmask}:${hostname}:${netdev}:off\0"	\
+	"addmisc="							\
+		"setenv bootargs ${bootargs} ${miscargs}\0"		\
+	"addargs=run addcons addmisc\0"					\
+	"mmcload="							\
+		"mmc rescan ; "						\
+		"load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0"	\
+	"netload="							\
+		"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"	\
+	"miscargs=nohlt panic=1\0"					\
+	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"		\
+	"nfsargs="							\
+		"setenv bootargs root=/dev/nfs rw "			\
+			"nfsroot=${serverip}:${rootpath},v3,tcp\0"	\
+	"mmc_mmc="							\
+		"run mmcload mmcargs addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"mmc_nfs="							\
+		"run mmcload nfsargs addip addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"net_mmc="							\
+		"run netload mmcargs addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"net_nfs="							\
+		"run netload nfsargs addip addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"try_bootscript="						\
+		"mmc rescan;"						\
+		"if test -e mmc ${bootpart} ${bootscript} ; then "	\
+		"if load mmc ${bootpart} ${kernel_addr_r} ${bootscript};"\
+		"then ; "						\
+			"echo Running bootscript... ; "			\
+			"source ${kernel_addr_r} ; "			\
+		"fi ; "							\
+		"fi\0"
+/* SPL */
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE		0x200000
+#define CONFIG_SPL_MAX_SIZE		0x10000
+#define CONFIG_SPL_BSS_START_ADDR	0x20000000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
+#define CONFIG_SYS_SPL_MALLOC_START	0x20080000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SYS_MONITOR_LEN		(512 << 10)
+
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x10000
+
+#endif	/* __MA5D4EVK_CONFIG_H__ */
diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index 44d1d5a..de7b6bc 100644
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -49,10 +49,18 @@
 #define CONFIG_BOARD_EARLY_INIT_F	/* call board_early_init_f() */
 #define CONFIG_DISPLAY_CPUINFO		/* display CPU Info at startup */
 
+/* We set the max number of command args high to avoid HUSH bugs. */
+#define CONFIG_SYS_MAXARGS    32
+
 /* setting board specific options */
-# define CONFIG_MACH_TYPE		MACH_TYPE_SMARTWEB
-#define CONFIG_CMDLINE_EDITING
+#define CONFIG_MACH_TYPE		MACH_TYPE_SMARTWEB
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_ENV_OVERWRITE    1 /* Overwrite ethaddr / serial# */
+#define CONFIG_SYS_HUSH_PARSER    /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2  "> "
 #define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_AUTOLOAD "yes"
+#define CONFIG_RESET_TO_RETRY
 
 /* The LED PINs */
 #define CONFIG_RED_LED			AT91_PIN_PA9
@@ -184,9 +192,7 @@
 /* General Boot Parameter */
 #define CONFIG_BOOTDELAY		3
 #define CONFIG_BOOTCOMMAND		"run flashboot"
-#define CONFIG_BOOT_RETRY_TIME          30
 #define CONFIG_SYS_CBSIZE		512
-#define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_PBSIZE \
 	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_LONGHELP
diff --git a/include/configs/vinco.h b/include/configs/vinco.h
new file mode 100644
index 0000000..92b1b4b
--- /dev/null
+++ b/include/configs/vinco.h
@@ -0,0 +1,167 @@
+/*
+ * Configuration settings for the VInCo platform.
+ *
+ * Based on the settings for the SAMA5-EK board
+ * Copyright (C) 2014 Atmel
+ *		      Bo Shen <voice.shen@atmel.com>
+ * Copyright (C) 2015 Free Electrons
+ *		      Gregory CLEMENT gregory.clement@free-electrons.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* No NOR flash, this definition should be put before common header */
+#define CONFIG_SYS_NO_FLASH
+
+#include "at91-sama5_common.h"
+
+/* The value in the common file is too far away for the VInCo platform */
+#ifdef CONFIG_SYS_TEXT_BASE
+#undef CONFIG_SYS_TEXT_BASE
+#endif
+#define CONFIG_SYS_TEXT_BASE		0x20f00000
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE		ATMEL_BASE_USART3
+#define	CONFIG_USART_ID			ATMEL_ID_USART3
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
+#define CONFIG_SYS_SDRAM_SIZE		0x4000000
+
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_SYS_LOAD_ADDR		0x22000000 /* load address */
+
+/* SerialFlash */
+#define CONFIG_CMD_SF
+
+#ifdef CONFIG_CMD_SF
+#define CONFIG_ATMEL_SPI
+#define CONFIG_ATMEL_SPI0
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SF_DEFAULT_BUS		0
+#define CONFIG_SF_DEFAULT_CS		0
+#define CONFIG_SF_DEFAULT_SPEED		50000000
+#define CONFIG_ENV_SPI_MAX_HZ		50000000
+#define CONFIG_SF_DEFAULT_MODE		(SPI_MODE_0)
+#define CONFIG_ENV_SPI_MODE		(SPI_MODE_0)
+#endif
+
+
+/* MMC */
+#define CONFIG_CMD_MMC
+
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_SUPPORT_EMMC_BOOT
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#define ATMEL_BASE_MMCI			ATMEL_BASE_MCI1
+#define CONFIG_SYS_MMC_CLK_OD		500000
+
+/* For generating MMC partitions */
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_RANDOM_UUID
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_GPT
+
+#endif
+
+/* USB */
+#define CONFIG_CMD_USB
+
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_ATMEL
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
+#define CONFIG_USB_STORAGE
+#endif
+
+/* USB device */
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_ATMEL_USBA
+#define CONFIG_USB_ETHER
+#define CONFIG_USB_ETH_RNDIS
+#define CONFIG_USBNET_MANUFACTURER      "L+G VInCo"
+
+#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
+/* Ethernet Hardware */
+#define CONFIG_CMD_MII
+#define CONFIG_PHY_SMSC
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_NET_RETRY_COUNT		20
+#define CONFIG_MACB_SEARCH_PHY
+
+
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_USB_ETHER_RNDIS
+
+
+#ifdef CONFIG_SYS_USE_SERIALFLASH
+/* bootstrap + u-boot + env + linux in serial flash */
+#define CONFIG_ENV_SPI_BUS	CONFIG_SF_DEFAULT_BUS
+#define CONFIG_ENV_SPI_CS	CONFIG_SF_DEFAULT_CS
+/* Use our own mapping for the VInCo platform */
+#undef CONFIG_ENV_OFFSET
+#undef CONFIG_ENV_SIZE
+
+#define CONFIG_ENV_OFFSET       0x10000
+#define CONFIG_ENV_SIZE         0x10000
+
+/* Update the bootcommand according to our mapping for the VInCo platform */
+#undef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND  "mmc dev 0 0;" \
+			    "mmc read ${loadaddr} ${k_offset} ${k_blksize};" \
+			    "mmc read ${oftaddr} ${dtb_offset} ${dtb_blksize};" \
+			    "bootz ${loadaddr} -  ${oftaddr}"
+
+#undef CONFIG_BOOTARGS
+#define CONFIG_BOOTARGS	    "console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootfstype=ext4 rootwait quiet lpj=1990656"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"kernel_start=0x20000\0" \
+	"kernel_size=0x800000\0" \
+	"mmcblksize=0x200\0" \
+	"oftaddr=0x21000000\0" \
+	"loadaddr=0x22000000\0" \
+	"update_uboot=tftp ${loadaddr} u-boot.bin;sf probe 0;" \
+	"sf erase 0x20000 0x4B000; sf write ${loadaddr} 0x20000 0x4B000\0" \
+	"create_partition=setexpr dtb_start ${kernel_start} + 0x400000;" \
+	"setexpr rootfs_start ${kernel_start} + ${kernel_size};" \
+	"setenv partitions 'name=kernel,size=${kernel_size}," \
+	"start=${kernel_start};name=rootfs,size=-';" \
+	"gpt write mmc 0 ${partitions} \0"\
+	"f2blk_size=setexpr fileblksize ${filesize} / ${mmcblksize};" \
+	"setexpr fileblksize ${fileblksize} + 1\0" \
+	"store_kernel=tftp ${loadaddr} zImage; run f2blk_size;" \
+	"setexpr k_blksize ${fileblksize};" \
+	"setexpr k_offset ${kernel_start} / ${mmcblksize};" \
+	"mmc write ${fileaddr} ${k_offset} ${fileblksize}\0" \
+	"store_dtb=tftp ${loadaddr} at91-vinco.dtb; run f2blk_size;" \
+	"setexpr dtb_blksize ${fileblksize};" \
+	"setexpr dtb_offset ${dtb_start} / ${mmcblksize};" \
+	"mmc write ${fileaddr} ${dtb_offset} ${fileblksize}\0" \
+	"store_rootfs=tftp ${loadaddr} vinco-gateway-image-vinco.ext4;" \
+	"setexpr rootfs_offset ${rootfs_start} / ${mmcblksize};" \
+	"mmc write ${fileaddr} ${rootfs_offset} ${fileblksize}\0" \
+	"bootdelay=0\0"
+
+#endif
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#endif