TI:omap3: Convert omap3_beagle to ti_omap3_common.h

Convert to using the common config files.  This requires a little more
flexibility in the common files than we had been using before.

Signed-off-by: Tom Rini <trini@ti.com>

3 files changed, 24 insertions, 169 deletions

diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 0b57421..fae0e6f 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -12,19 +12,22 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
+
 /*
- * High Level Configuration Options
+ * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
+ * 64 bytes before this address should be set aside for u-boot.img's
+ * header. That is 0x800FFFC0--0x80100000 should not be used for any
+ * other needs.  We use this rather than the inherited defines from
+ * ti_armv7_common.h for backwards compatibility.
  */
-#define CONFIG_OMAP		1	/* in a TI OMAP core */
-#define CONFIG_OMAP34XX		1	/* which is a 34XX */
-#define CONFIG_OMAP3_BEAGLE	1	/* working with BEAGLE */
-#define CONFIG_OMAP_GPIO
-#define CONFIG_OMAP_COMMON
-
-#define CONFIG_SDRC	/* The chip has SDRC controller */
+#define CONFIG_SYS_TEXT_BASE		0x80100000
+#define CONFIG_SPL_BSS_START_ADDR	0x80000000
+#define CONFIG_SPL_BSS_MAX_SIZE		(512 << 10)	/* 512 KB */
+#define CONFIG_SYS_SPL_MALLOC_START	0x80208000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
 
-#include <asm/arch/cpu.h>		/* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <configs/ti_omap3_common.h>
 
 /*
  * Display CPU and Board information
@@ -32,57 +35,10 @@
 #define CONFIG_DISPLAY_CPUINFO		1
 #define CONFIG_DISPLAY_BOARDINFO	1
 
-/* Clock Defines */
-#define V_OSCK			26000000	/* Clock output from T2 */
-#define V_SCLK			(V_OSCK >> 1)
-
 #define CONFIG_MISC_INIT_R
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
-
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
 #define CONFIG_REVISION_TAG		1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
-						/* Sector */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
-
-/*
- * Hardware drivers
- */
-
-/*
- * NS16550 Configuration
- */
-#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
-
-/*
- * select serial console configuration
- */
-#define CONFIG_CONS_INDEX		3
-#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
-#define CONFIG_SERIAL3			3	/* UART3 on Beagle Rev 2 */
-
-/* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
-					115200}
-#define CONFIG_GENERIC_MMC		1
-#define CONFIG_MMC			1
-#define CONFIG_OMAP_HSMMC		1
-#define CONFIG_DOS_PARTITION		1
 
 /* Status LED */
 #define CONFIG_STATUS_LED		1
@@ -134,44 +90,23 @@
 #define CONFIG_CMD_ASKENV
 
 #define CONFIG_CMD_CACHE
-#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
-#define CONFIG_CMD_FAT		/* FAT support			*/
-#define CONFIG_CMD_FS_GENERIC	/* Generic FS support */
-#define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands */
-#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
+
 #define MTDIDS_DEFAULT			"nand0=nand"
 #define MTDPARTS_DEFAULT		"mtdparts=nand:512k(x-loader),"\
 					"1920k(u-boot),128k(u-boot-env),"\
 					"4m(kernel),-(fs)"
 
-#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
-#define CONFIG_CMD_MMC		/* MMC support			*/
 #define CONFIG_USB_STORAGE	/* USB storage support		*/
 #define CONFIG_CMD_NAND		/* NAND support			*/
 #define CONFIG_CMD_LED		/* LED support			*/
-#define CONFIG_CMD_NET      /* bootp, tftpboot, rarpboot    */
-#define CONFIG_CMD_NFS      /* NFS support          */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_SETEXPR	/* Evaluate expressions		*/
 #define CONFIG_CMD_GPIO     /* Enable gpio command */
 
-#undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
-#undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
-#undef CONFIG_CMD_IMI		/* iminfo			*/
-#undef CONFIG_CMD_IMLS		/* List all found images	*/
-
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
-#define CONFIG_SYS_I2C_OMAP34XX
 #define CONFIG_VIDEO_OMAP3	/* DSS Support			*/
 
 /*
  * TWL4030
  */
-#define CONFIG_TWL4030_POWER		1
 #define CONFIG_TWL4030_LED		1
 
 /*
@@ -179,17 +114,9 @@
  */
 #define CONFIG_SYS_NAND_QUIET_TEST	1
 #define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
-							/* to access nand */
-#define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
-							/* to access nand at */
-							/* CS0 */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
 
-/* Environment information */
-#define CONFIG_BOOTDELAY		3
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x80200000\0" \
 	"rdaddr=0x81000000\0" \
@@ -310,46 +237,14 @@
 		"run mmcbootz; " \
 	"fi; " \
 
-#define CONFIG_AUTO_COMPLETE		1
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
-#define CONFIG_SYS_PROMPT		"OMAP3 beagleboard.org # "
-#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		32	/* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
-
-#define CONFIG_SYS_ALT_MEMTEST		1
-#define CONFIG_SYS_MEMTEST_START	(0x82000000)		/* memtest */
-								/* defaults */
-#define CONFIG_SYS_MEMTEST_END		(0x87FFFFFF) 		/* 128MB */
-#define CONFIG_SYS_MEMTEST_SCRATCH	(0x81000000)	/* dummy address */
-
-#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)	/* default */
-							/* load address */
-
 /*
  * OMAP3 has 12 GP timers, they can be driven by the system clock
  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
  * This rate is divided by a local divisor.
  */
-#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */
 
 /*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
-#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
-
-/*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
 
@@ -359,8 +254,6 @@
 #define PISMO1_NAND_SIZE		GPMC_SIZE_128M
 #define PISMO1_ONEN_SIZE		GPMC_SIZE_128M
 
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
-
 #if defined(CONFIG_CMD_NAND)
 #define CONFIG_SYS_FLASH_BASE		PISMO1_NAND_BASE
 #endif
@@ -370,6 +263,7 @@
 #define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
 
 #define CONFIG_ENV_IS_IN_NAND		1
+#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
 #define ONENAND_ENV_OFFSET		0x260000 /* environment starts here */
 #define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */
 
@@ -377,49 +271,12 @@
 #define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
 #define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
 
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE	0x800
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - \
-					 GENERATED_GBL_DATA_SIZE)
-
 #define CONFIG_OMAP3_SPI
 
 #define CONFIG_SYS_CACHELINE_SIZE	64
 
 /* Defines for SPL */
-#define CONFIG_SPL
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_NAND_SIMPLE
-#define CONFIG_SPL_TEXT_BASE		0x40200800
-#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
-#define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
-
-#define CONFIG_SPL_BSS_START_ADDR	0x80000000
-#define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
-
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
-
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_OMAP3_ID_NAND
-#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
 
 /* NAND boot config */
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
@@ -433,17 +290,6 @@
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	3
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_HW
-#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 
-/*
- * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
- * 64 bytes before this address should be set aside for u-boot.img's
- * header. That is 0x800FFFC0--0x80100000 should not be used for any
- * other needs.
- */
-#define CONFIG_SYS_TEXT_BASE		0x80100000
-#define CONFIG_SYS_SPL_MALLOC_START	0x80208000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
-
 #endif /* __CONFIG_H */
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index 2aa3540..4854272 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -111,7 +111,9 @@
  */
 #ifdef CONFIG_NAND
 #define CONFIG_NAND_OMAP_GPMC
+#ifndef CONFIG_SYS_NAND_BASE
 #define CONFIG_SYS_NAND_BASE		0x8000000
+#endif
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_CMD_NAND
 #endif
@@ -209,12 +211,18 @@
  * We have the SPL malloc pool at the end of the BSS area.
  */
 #define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
+#ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE		0x80800000
+#endif
+#ifndef CONFIG_SPL_BSS_START_ADDR
 #define CONFIG_SPL_BSS_START_ADDR	0x80a00000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
+#endif
+#ifndef CONFIG_SYS_SPL_MALLOC_START
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
 					 CONFIG_SPL_BSS_MAX_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	CONFIG_SYS_MALLOC_LEN
+#endif
 
 /* RAW SD card / eMMC locations. */
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h
index 1c6ee4c..ade35d2 100644
--- a/include/configs/ti_omap3_common.h
+++ b/include/configs/ti_omap3_common.h
@@ -68,6 +68,7 @@
 #ifdef CONFIG_NAND
 #define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_SIMPLE
+#define CONFIG_SYS_NAND_BASE		0x30000000
 #endif
 
 /* Now bring in the rest of the common code. */