Merge branch 'phylib' of git://git.denx.de/u-boot-mmc

14 files changed, 1403 insertions, 316 deletions

diff --git a/include/config_phylib_all_drivers.h b/include/config_phylib_all_drivers.h
new file mode 100644
index 0000000..903c7a7
--- /dev/null
+++ b/include/config_phylib_all_drivers.h
@@ -0,0 +1,32 @@
+/*
+ * Enable all PHYs
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ */
+#ifndef _CONFIG_PHYLIB_ALL_H
+#define _CONFIG_PHYLIB_ALL_H
+
+#ifdef CONFIG_PHYLIB
+
+#define CONFIG_PHY_VITESSE
+#define CONFIG_PHY_MARVELL
+#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_BROADCOM
+#define CONFIG_PHY_DAVICOM
+#define CONFIG_PHY_REALTEK
+#define CONFIG_PHY_NATSEMI
+#define CONFIG_PHY_LXT
+
+#ifdef CONFIG_PHYLIB_10G
+#define CONFIG_PHY_TERANETICS
+#endif /* CONFIG_PHYLIB_10G */
+
+#endif /* CONFIG_PHYLIB */
+
+#endif /*_CONFIG_PHYLIB_ALL_H */
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index 1191eea..e25d5ac 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -348,7 +348,7 @@
 #define CONFIG_SYS_UEC1_TX_CLK		QE_CLK10
 #define CONFIG_SYS_UEC1_ETH_TYPE	FAST_ETH
 #define CONFIG_SYS_UEC1_PHY_ADDR	4
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE	MII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE	PHY_INTERFACE_MODE_MII
 #define CONFIG_SYS_UEC1_INTERFACE_SPEED	100
 #endif
 
@@ -360,7 +360,7 @@
 #define CONFIG_SYS_UEC2_TX_CLK		QE_CLK3
 #define CONFIG_SYS_UEC2_ETH_TYPE	FAST_ETH
 #define CONFIG_SYS_UEC2_PHY_ADDR	0
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE	MII
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE	PHY_INTERFACE_MODE_MII
 #define CONFIG_SYS_UEC2_INTERFACE_SPEED	100
 #endif
 
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index affa3a9..f136a8e 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -361,7 +361,7 @@
 #define CONFIG_SYS_UEC1_TX_CLK		QE_CLK10
 #define CONFIG_SYS_UEC1_ETH_TYPE	FAST_ETH
 #define CONFIG_SYS_UEC1_PHY_ADDR	3
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE	MII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE	PHY_INTERFACE_MODE_MII
 #define CONFIG_SYS_UEC1_INTERFACE_SPEED	100
 #endif
 
@@ -373,7 +373,7 @@
 #define CONFIG_SYS_UEC2_TX_CLK		QE_CLK8
 #define CONFIG_SYS_UEC2_ETH_TYPE	FAST_ETH
 #define CONFIG_SYS_UEC2_PHY_ADDR	4
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE	MII
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE	PHY_INTERFACE_MODE_MII
 #define CONFIG_SYS_UEC2_INTERFACE_SPEED	100
 #endif
 
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index a959940..49d64a5 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -402,7 +402,7 @@
 #define CONFIG_SYS_UEC1_TX_CLK		QE_CLK9
 #define CONFIG_SYS_UEC1_ETH_TYPE	GIGA_ETH
 #define CONFIG_SYS_UEC1_PHY_ADDR	0
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
 #endif
 
@@ -414,7 +414,7 @@
 #define CONFIG_SYS_UEC2_TX_CLK		QE_CLK4
 #define CONFIG_SYS_UEC2_ETH_TYPE	GIGA_ETH
 #define CONFIG_SYS_UEC2_PHY_ADDR	1
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
 #define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
 #endif
 
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index b0cdc02..a4f42cf 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -319,7 +319,7 @@
 #define CONFIG_SYS_UEC1_TX_CLK		QE_CLK9
 #define CONFIG_SYS_UEC1_ETH_TYPE	GIGA_ETH
 #define CONFIG_SYS_UEC1_PHY_ADDR	2
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_RXID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_RXID
 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
 #endif
 
@@ -331,7 +331,7 @@
 #define CONFIG_SYS_UEC2_TX_CLK		QE_CLK4
 #define CONFIG_SYS_UEC2_ETH_TYPE	GIGA_ETH
 #define CONFIG_SYS_UEC2_PHY_ADDR	4
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_RXID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_RXID
 #define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
 #endif
 
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 3674e49..6237b23 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -334,7 +334,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_UEC1_TX_CLK         QE_CLK16
 #define CONFIG_SYS_UEC1_ETH_TYPE       GIGA_ETH
 #define CONFIG_SYS_UEC1_PHY_ADDR       7
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
 #endif
 
@@ -346,7 +346,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_UEC2_TX_CLK         QE_CLK16
 #define CONFIG_SYS_UEC2_ETH_TYPE       GIGA_ETH
 #define CONFIG_SYS_UEC2_PHY_ADDR       1
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
 #define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
 #endif
 #endif /* CONFIG_QE */
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 5a7e99e..8835ef5 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -385,13 +385,13 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_UEC1_TX_CLK         QE_CLK12
 #define CONFIG_SYS_UEC1_ETH_TYPE       GIGA_ETH
 #define CONFIG_SYS_UEC1_PHY_ADDR       7
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
 #elif defined(CONFIG_SYS_UCC_RMII_MODE)
 #define CONFIG_SYS_UEC1_TX_CLK         QE_CLK16	/* CLK16 for RMII */
 #define CONFIG_SYS_UEC1_ETH_TYPE       FAST_ETH
 #define CONFIG_SYS_UEC1_PHY_ADDR       8	/* 0x8 for RMII */
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
 #endif /* CONFIG_SYS_UCC_RGMII_MODE */
 #endif /* CONFIG_UEC_ETH1 */
@@ -406,13 +406,13 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_UEC2_TX_CLK         QE_CLK17
 #define CONFIG_SYS_UEC2_ETH_TYPE       GIGA_ETH
 #define CONFIG_SYS_UEC2_PHY_ADDR       1
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
 #define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
 #elif defined(CONFIG_SYS_UCC_RMII_MODE)
 #define CONFIG_SYS_UEC2_TX_CLK         QE_CLK16	/* CLK 16 for RMII */
 #define CONFIG_SYS_UEC2_ETH_TYPE       FAST_ETH
 #define CONFIG_SYS_UEC2_PHY_ADDR       0x9	/* 0x9 for RMII */
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 #define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
 #endif /* CONFIG_SYS_UCC_RGMII_MODE */
 #endif /* CONFIG_UEC_ETH2 */
@@ -427,13 +427,13 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_UEC3_TX_CLK         QE_CLK12
 #define CONFIG_SYS_UEC3_ETH_TYPE       GIGA_ETH
 #define CONFIG_SYS_UEC3_PHY_ADDR       2
-#define CONFIG_SYS_UEC3_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC3_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
 #define CONFIG_SYS_UEC3_INTERFACE_SPEED 1000
 #elif defined(CONFIG_SYS_UCC_RMII_MODE)
 #define CONFIG_SYS_UEC3_TX_CLK		QE_CLK16 /* CLK_16 for RMII */
 #define CONFIG_SYS_UEC3_ETH_TYPE	FAST_ETH
 #define CONFIG_SYS_UEC3_PHY_ADDR	0xA     /* 0xA for RMII */
-#define CONFIG_SYS_UEC3_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC3_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 #define CONFIG_SYS_UEC3_INTERFACE_SPEED 100
 #endif /* CONFIG_SYS_UCC_RGMII_MODE */
 #endif /* CONFIG_UEC_ETH3 */
@@ -448,13 +448,13 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_UEC4_TX_CLK         QE_CLK17
 #define CONFIG_SYS_UEC4_ETH_TYPE       GIGA_ETH
 #define CONFIG_SYS_UEC4_PHY_ADDR       3
-#define CONFIG_SYS_UEC4_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC4_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
 #define CONFIG_SYS_UEC4_INTERFACE_SPEED 1000
 #elif defined(CONFIG_SYS_UCC_RMII_MODE)
 #define CONFIG_SYS_UEC4_TX_CLK		QE_CLK16 /* CLK16 for RMII */
 #define CONFIG_SYS_UEC4_ETH_TYPE	FAST_ETH
 #define CONFIG_SYS_UEC4_PHY_ADDR	0xB     /* 0xB for RMII */
-#define CONFIG_SYS_UEC4_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC4_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 #define CONFIG_SYS_UEC4_INTERFACE_SPEED 100
 #endif /* CONFIG_SYS_UCC_RGMII_MODE */
 #endif /* CONFIG_UEC_ETH4 */
@@ -468,7 +468,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_UEC6_TX_CLK         QE_CLK_NONE
 #define CONFIG_SYS_UEC6_ETH_TYPE       GIGA_ETH
 #define CONFIG_SYS_UEC6_PHY_ADDR       4
-#define CONFIG_SYS_UEC6_INTERFACE_TYPE SGMII
+#define CONFIG_SYS_UEC6_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII
 #define CONFIG_SYS_UEC6_INTERFACE_SPEED 1000
 #endif /* CONFIG_UEC_ETH6 */
 
@@ -481,7 +481,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_UEC8_TX_CLK         QE_CLK_NONE
 #define CONFIG_SYS_UEC8_ETH_TYPE       GIGA_ETH
 #define CONFIG_SYS_UEC8_PHY_ADDR       6
-#define CONFIG_SYS_UEC8_INTERFACE_TYPE SGMII
+#define CONFIG_SYS_UEC8_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII
 #define CONFIG_SYS_UEC8_INTERFACE_SPEED 1000
 #endif /* CONFIG_UEC_ETH8 */
 
diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h
index 8fcadfe..b98e6a1 100644
--- a/include/configs/kmeter1.h
+++ b/include/configs/kmeter1.h
@@ -295,7 +295,7 @@
 #define CONFIG_SYS_UEC1_TX_CLK		QE_CLK17
 #define CONFIG_SYS_UEC1_ETH_TYPE	FAST_ETH
 #define CONFIG_SYS_UEC1_PHY_ADDR	0
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
 #endif
 
diff --git a/include/fsl_mdio.h b/include/fsl_mdio.h
new file mode 100644
index 0000000..17ca79c
--- /dev/null
+++ b/include/fsl_mdio.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ *	Jun-jie Zhang <b18070@freescale.com>
+ *	Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __FSL_PHY_H__
+#define __FSL_PHY_H__
+
+#include <net.h>
+#include <miiphy.h>
+#include <asm/fsl_enet.h>
+
+/* PHY register offsets */
+#define PHY_EXT_PAGE_ACCESS	0x1f
+
+/* MII Management Configuration Register */
+#define MIIMCFG_RESET_MGMT          0x80000000
+#define MIIMCFG_MGMT_CLOCK_SELECT   0x00000007
+#define MIIMCFG_INIT_VALUE	    0x00000003
+
+/* MII Management Command Register */
+#define MIIMCOM_READ_CYCLE	0x00000001
+#define MIIMCOM_SCAN_CYCLE	0x00000002
+
+/* MII Management Address Register */
+#define MIIMADD_PHY_ADDR_SHIFT	8
+
+/* MII Management Indicator Register */
+#define MIIMIND_BUSY		0x00000001
+#define MIIMIND_NOTVALID	0x00000004
+
+void tsec_local_mdio_write(struct tsec_mii_mng *phyregs, int port_addr,
+		int dev_addr, int reg, int value);
+int tsec_local_mdio_read(struct tsec_mii_mng *phyregs, int port_addr,
+		int dev_addr, int regnum);
+int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum);
+int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum,
+		u16 value);
+
+struct fsl_pq_mdio_info {
+	struct tsec_mii_mng *regs;
+	char *name;
+};
+int fsl_pq_mdio_init(bd_t *bis, struct fsl_pq_mdio_info *info);
+
+#endif /* __FSL_PHY_H__ */
+
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
new file mode 100644
index 0000000..fcb20fe
--- /dev/null
+++ b/include/linux/ethtool.h
@@ -0,0 +1,721 @@
+/*
+ * ethtool.h: Defines for Linux ethtool.
+ *
+ * Copyright (C) 1998 David S. Miller (davem@redhat.com)
+ * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
+ * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
+ * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
+ *                                christopher.leech@intel.com,
+ *                                scott.feldman@intel.com)
+ * Portions Copyright (C) Sun Microsystems 2008
+ */
+
+#ifndef _LINUX_ETHTOOL_H
+#define _LINUX_ETHTOOL_H
+
+#include <linux/types.h>
+
+/* This should work for both 32 and 64 bit userland. */
+struct ethtool_cmd {
+	__u32	cmd;
+	__u32	supported;	/* Features this interface supports */
+	__u32	advertising;	/* Features this interface advertises */
+	__u16	speed;		/* The forced speed, 10Mb, 100Mb, gigabit */
+	__u8	duplex;		/* Duplex, half or full */
+	__u8	port;		/* Which connector port */
+	__u8	phy_address;
+	__u8	transceiver;	/* Which transceiver to use */
+	__u8	autoneg;	/* Enable or disable autonegotiation */
+	__u8	mdio_support;
+	__u32	maxtxpkt;	/* Tx pkts before generating tx int */
+	__u32	maxrxpkt;	/* Rx pkts before generating rx int */
+	__u16	speed_hi;
+	__u8	eth_tp_mdix;
+	__u8	reserved2;
+	__u32	lp_advertising;	/* Features the link partner advertises */
+	__u32	reserved[2];
+};
+
+static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
+						__u32 speed)
+{
+
+	ep->speed = (__u16)speed;
+	ep->speed_hi = (__u16)(speed >> 16);
+}
+
+static inline __u32 ethtool_cmd_speed(struct ethtool_cmd *ep)
+{
+	return (ep->speed_hi << 16) | ep->speed;
+}
+
+#define ETHTOOL_FWVERS_LEN	32
+#define ETHTOOL_BUSINFO_LEN	32
+/* these strings are set to whatever the driver author decides... */
+struct ethtool_drvinfo {
+	__u32	cmd;
+	char	driver[32];	/* driver short name, "tulip", "eepro100" */
+	char	version[32];	/* driver version string */
+	char	fw_version[ETHTOOL_FWVERS_LEN];	/* firmware version string */
+	char	bus_info[ETHTOOL_BUSINFO_LEN];	/* Bus info for this IF. */
+				/* For PCI devices, use pci_name(pci_dev). */
+	char	reserved1[32];
+	char	reserved2[12];
+				/*
+				 * Some struct members below are filled in
+				 * using ops->get_sset_count().  Obtaining
+				 * this info from ethtool_drvinfo is now
+				 * deprecated; Use ETHTOOL_GSSET_INFO
+				 * instead.
+				 */
+	__u32	n_priv_flags;	/* number of flags valid in ETHTOOL_GPFLAGS */
+	__u32	n_stats;	/* number of u64's from ETHTOOL_GSTATS */
+	__u32	testinfo_len;
+	__u32	eedump_len;	/* Size of data from ETHTOOL_GEEPROM (bytes) */
+	__u32	regdump_len;	/* Size of data from ETHTOOL_GREGS (bytes) */
+};
+
+#define SOPASS_MAX	6
+/* wake-on-lan settings */
+struct ethtool_wolinfo {
+	__u32	cmd;
+	__u32	supported;
+	__u32	wolopts;
+	__u8	sopass[SOPASS_MAX]; /* SecureOn(tm) password */
+};
+
+/* for passing single values */
+struct ethtool_value {
+	__u32	cmd;
+	__u32	data;
+};
+
+/* for passing big chunks of data */
+struct ethtool_regs {
+	__u32	cmd;
+	__u32	version; /* driver-specific, indicates different chips/revs */
+	__u32	len; /* bytes */
+	__u8	data[0];
+};
+
+/* for passing EEPROM chunks */
+struct ethtool_eeprom {
+	__u32	cmd;
+	__u32	magic;
+	__u32	offset; /* in bytes */
+	__u32	len; /* in bytes */
+	__u8	data[0];
+};
+
+/* for configuring coalescing parameters of chip */
+struct ethtool_coalesce {
+	__u32	cmd;	/* ETHTOOL_{G,S}COALESCE */
+
+	/* How many usecs to delay an RX interrupt after
+	 * a packet arrives.  If 0, only rx_max_coalesced_frames
+	 * is used.
+	 */
+	__u32	rx_coalesce_usecs;
+
+	/* How many packets to delay an RX interrupt after
+	 * a packet arrives.  If 0, only rx_coalesce_usecs is
+	 * used.  It is illegal to set both usecs and max frames
+	 * to zero as this would cause RX interrupts to never be
+	 * generated.
+	 */
+	__u32	rx_max_coalesced_frames;
+
+	/* Same as above two parameters, except that these values
+	 * apply while an IRQ is being serviced by the host.  Not
+	 * all cards support this feature and the values are ignored
+	 * in that case.
+	 */
+	__u32	rx_coalesce_usecs_irq;
+	__u32	rx_max_coalesced_frames_irq;
+
+	/* How many usecs to delay a TX interrupt after
+	 * a packet is sent.  If 0, only tx_max_coalesced_frames
+	 * is used.
+	 */
+	__u32	tx_coalesce_usecs;
+
+	/* How many packets to delay a TX interrupt after
+	 * a packet is sent.  If 0, only tx_coalesce_usecs is
+	 * used.  It is illegal to set both usecs and max frames
+	 * to zero as this would cause TX interrupts to never be
+	 * generated.
+	 */
+	__u32	tx_max_coalesced_frames;
+
+	/* Same as above two parameters, except that these values
+	 * apply while an IRQ is being serviced by the host.  Not
+	 * all cards support this feature and the values are ignored
+	 * in that case.
+	 */
+	__u32	tx_coalesce_usecs_irq;
+	__u32	tx_max_coalesced_frames_irq;
+
+	/* How many usecs to delay in-memory statistics
+	 * block updates.  Some drivers do not have an in-memory
+	 * statistic block, and in such cases this value is ignored.
+	 * This value must not be zero.
+	 */
+	__u32	stats_block_coalesce_usecs;
+
+	/* Adaptive RX/TX coalescing is an algorithm implemented by
+	 * some drivers to improve latency under low packet rates and
+	 * improve throughput under high packet rates.  Some drivers
+	 * only implement one of RX or TX adaptive coalescing.  Anything
+	 * not implemented by the driver causes these values to be
+	 * silently ignored.
+	 */
+	__u32	use_adaptive_rx_coalesce;
+	__u32	use_adaptive_tx_coalesce;
+
+	/* When the packet rate (measured in packets per second)
+	 * is below pkt_rate_low, the {rx,tx}_*_low parameters are
+	 * used.
+	 */
+	__u32	pkt_rate_low;
+	__u32	rx_coalesce_usecs_low;
+	__u32	rx_max_coalesced_frames_low;
+	__u32	tx_coalesce_usecs_low;
+	__u32	tx_max_coalesced_frames_low;
+
+	/* When the packet rate is below pkt_rate_high but above
+	 * pkt_rate_low (both measured in packets per second) the
+	 * normal {rx,tx}_* coalescing parameters are used.
+	 */
+
+	/* When the packet rate is (measured in packets per second)
+	 * is above pkt_rate_high, the {rx,tx}_*_high parameters are
+	 * used.
+	 */
+	__u32	pkt_rate_high;
+	__u32	rx_coalesce_usecs_high;
+	__u32	rx_max_coalesced_frames_high;
+	__u32	tx_coalesce_usecs_high;
+	__u32	tx_max_coalesced_frames_high;
+
+	/* How often to do adaptive coalescing packet rate sampling,
+	 * measured in seconds.  Must not be zero.
+	 */
+	__u32	rate_sample_interval;
+};
+
+/* for configuring RX/TX ring parameters */
+struct ethtool_ringparam {
+	__u32	cmd;	/* ETHTOOL_{G,S}RINGPARAM */
+
+	/* Read only attributes.  These indicate the maximum number
+	 * of pending RX/TX ring entries the driver will allow the
+	 * user to set.
+	 */
+	__u32	rx_max_pending;
+	__u32	rx_mini_max_pending;
+	__u32	rx_jumbo_max_pending;
+	__u32	tx_max_pending;
+
+	/* Values changeable by the user.  The valid values are
+	 * in the range 1 to the "*_max_pending" counterpart above.
+	 */
+	__u32	rx_pending;
+	__u32	rx_mini_pending;
+	__u32	rx_jumbo_pending;
+	__u32	tx_pending;
+};
+
+/* for configuring link flow control parameters */
+struct ethtool_pauseparam {
+	__u32	cmd;	/* ETHTOOL_{G,S}PAUSEPARAM */
+
+	/* If the link is being auto-negotiated (via ethtool_cmd.autoneg
+	 * being true) the user may set 'autonet' here non-zero to have the
+	 * pause parameters be auto-negotiated too.  In such a case, the
+	 * {rx,tx}_pause values below determine what capabilities are
+	 * advertised.
+	 *
+	 * If 'autoneg' is zero or the link is not being auto-negotiated,
+	 * then {rx,tx}_pause force the driver to use/not-use pause
+	 * flow control.
+	 */
+	__u32	autoneg;
+	__u32	rx_pause;
+	__u32	tx_pause;
+};
+
+#define ETH_GSTRING_LEN		32
+enum ethtool_stringset {
+	ETH_SS_TEST		= 0,
+	ETH_SS_STATS,
+	ETH_SS_PRIV_FLAGS,
+	ETH_SS_NTUPLE_FILTERS,
+	ETH_SS_FEATURES,
+};
+
+/* for passing string sets for data tagging */
+struct ethtool_gstrings {
+	__u32	cmd;		/* ETHTOOL_GSTRINGS */
+	__u32	string_set;	/* string set id e.c. ETH_SS_TEST, etc*/
+	__u32	len;		/* number of strings in the string set */
+	__u8	data[0];
+};
+
+struct ethtool_sset_info {
+	__u32	cmd;		/* ETHTOOL_GSSET_INFO */
+	__u32	reserved;
+	__u64	sset_mask;	/* input: each bit selects an sset to query */
+				/* output: each bit a returned sset */
+	__u32	data[0];	/* ETH_SS_xxx count, in order, based on bits
+				   in sset_mask.  One bit implies one
+				   __u32, two bits implies two
+				   __u32's, etc. */
+};
+
+enum ethtool_test_flags {
+	ETH_TEST_FL_OFFLINE	= (1 << 0),	/* online / offline */
+	ETH_TEST_FL_FAILED	= (1 << 1),	/* test passed / failed */
+};
+
+/* for requesting NIC test and getting results*/
+struct ethtool_test {
+	__u32	cmd;		/* ETHTOOL_TEST */
+	__u32	flags;		/* ETH_TEST_FL_xxx */
+	__u32	reserved;
+	__u32	len;		/* result length, in number of u64 elements */
+	__u64	data[0];
+};
+
+/* for dumping NIC-specific statistics */
+struct ethtool_stats {
+	__u32	cmd;		/* ETHTOOL_GSTATS */
+	__u32	n_stats;	/* number of u64's being returned */
+	__u64	data[0];
+};
+
+struct ethtool_perm_addr {
+	__u32	cmd;		/* ETHTOOL_GPERMADDR */
+	__u32	size;
+	__u8	data[0];
+};
+
+/* boolean flags controlling per-interface behavior characteristics.
+ * When reading, the flag indicates whether or not a certain behavior
+ * is enabled/present.  When writing, the flag indicates whether
+ * or not the driver should turn on (set) or off (clear) a behavior.
+ *
+ * Some behaviors may read-only (unconditionally absent or present).
+ * If such is the case, return EINVAL in the set-flags operation if the
+ * flag differs from the read-only value.
+ */
+enum ethtool_flags {
+	ETH_FLAG_TXVLAN		= (1 << 7),	/* TX VLAN offload enabled */
+	ETH_FLAG_RXVLAN		= (1 << 8),	/* RX VLAN offload enabled */
+	ETH_FLAG_LRO		= (1 << 15),	/* LRO is enabled */
+	ETH_FLAG_NTUPLE		= (1 << 27),	/* N-tuple filters enabled */
+	ETH_FLAG_RXHASH		= (1 << 28),
+};
+
+/* The following structures are for supporting RX network flow
+ * classification and RX n-tuple configuration. Note, all multibyte
+ * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to
+ * be in network byte order.
+ */
+
+/**
+ * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc.
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @psrc: Source port
+ * @pdst: Destination port
+ * @tos: Type-of-service
+ *
+ * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow.
+ */
+struct ethtool_tcpip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__be16	psrc;
+	__be16	pdst;
+	__u8    tos;
+};
+
+/**
+ * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @spi: Security parameters index
+ * @tos: Type-of-service
+ *
+ * This can be used to specify an IPsec transport or tunnel over IPv4.
+ */
+struct ethtool_ah_espip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__be32	spi;
+	__u8    tos;
+};
+
+#define	ETH_RX_NFC_IP4	1
+
+/**
+ * struct ethtool_usrip4_spec - general flow specification for IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @l4_4_bytes: First 4 bytes of transport (layer 4) header
+ * @tos: Type-of-service
+ * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0
+ * @proto: Transport protocol number; mask must be 0
+ */
+struct ethtool_usrip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__be32	l4_4_bytes;
+	__u8    tos;
+	__u8    ip_ver;
+	__u8    proto;
+};
+
+
+/**
+ * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection
+ * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR
+ * @size: On entry, the array size of the user buffer.  On return from
+ *	%ETHTOOL_GRXFHINDIR, the array size of the hardware indirection table.
+ * @ring_index: RX ring/queue index for each hash value
+ */
+struct ethtool_rxfh_indir {
+	__u32	cmd;
+	__u32	size;
+	__u32	ring_index[0];
+};
+
+#define ETHTOOL_FLASH_MAX_FILENAME	128
+enum ethtool_flash_op_type {
+	ETHTOOL_FLASH_ALL_REGIONS	= 0,
+};
+
+/* for passing firmware flashing related parameters */
+struct ethtool_flash {
+	__u32	cmd;
+	__u32	region;
+	char	data[ETHTOOL_FLASH_MAX_FILENAME];
+};
+
+/* for returning and changing feature sets */
+
+/**
+ * struct ethtool_get_features_block - block with state of 32 features
+ * @available: mask of changeable features
+ * @requested: mask of features requested to be enabled if possible
+ * @active: mask of currently enabled features
+ * @never_changed: mask of features not changeable for any device
+ */
+struct ethtool_get_features_block {
+	__u32	available;
+	__u32	requested;
+	__u32	active;
+	__u32	never_changed;
+};
+
+/**
+ * struct ethtool_gfeatures - command to get state of device's features
+ * @cmd: command number = %ETHTOOL_GFEATURES
+ * @size: in: number of elements in the features[] array;
+ *       out: number of elements in features[] needed to hold all features
+ * @features: state of features
+ */
+struct ethtool_gfeatures {
+	__u32	cmd;
+	__u32	size;
+	struct ethtool_get_features_block features[0];
+};
+
+/**
+ * struct ethtool_set_features_block - block with request for 32 features
+ * @valid: mask of features to be changed
+ * @requested: values of features to be changed
+ */
+struct ethtool_set_features_block {
+	__u32	valid;
+	__u32	requested;
+};
+
+/**
+ * struct ethtool_sfeatures - command to request change in device's features
+ * @cmd: command number = %ETHTOOL_SFEATURES
+ * @size: array size of the features[] array
+ * @features: feature change masks
+ */
+struct ethtool_sfeatures {
+	__u32	cmd;
+	__u32	size;
+	struct ethtool_set_features_block features[0];
+};
+
+/*
+ * %ETHTOOL_SFEATURES changes features present in features[].valid to the
+ * values of corresponding bits in features[].requested. Bits in .requested
+ * not set in .valid or not changeable are ignored.
+ *
+ * Returns %EINVAL when .valid contains undefined or never-changable bits
+ * or size is not equal to required number of features words (32-bit blocks).
+ * Returns >= 0 if request was completed; bits set in the value mean:
+ *   %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not
+ *	changeable (not present in %ETHTOOL_GFEATURES' features[].available)
+ *	those bits were ignored.
+ *   %ETHTOOL_F_WISH - some or all changes requested were recorded but the
+ *      resulting state of bits masked by .valid is not equal to .requested.
+ *      Probably there are other device-specific constraints on some features
+ *      in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered
+ *      here as though ignored bits were cleared.
+ *   %ETHTOOL_F_COMPAT - some or all changes requested were made by calling
+ *      compatibility functions. Requested offload state cannot be properly
+ *      managed by kernel.
+ *
+ * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of
+ * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands
+ * for ETH_SS_FEATURES string set. First entry in the table corresponds to least
+ * significant bit in features[0] fields. Empty strings mark undefined features.
+ */
+enum ethtool_sfeatures_retval_bits {
+	ETHTOOL_F_UNSUPPORTED__BIT,
+	ETHTOOL_F_WISH__BIT,
+	ETHTOOL_F_COMPAT__BIT,
+};
+
+#define ETHTOOL_F_UNSUPPORTED   (1 << ETHTOOL_F_UNSUPPORTED__BIT)
+#define ETHTOOL_F_WISH          (1 << ETHTOOL_F_WISH__BIT)
+#define ETHTOOL_F_COMPAT        (1 << ETHTOOL_F_COMPAT__BIT)
+
+/* CMDs currently supported */
+#define ETHTOOL_GSET		0x00000001 /* Get settings. */
+#define ETHTOOL_SSET		0x00000002 /* Set settings. */
+#define ETHTOOL_GDRVINFO	0x00000003 /* Get driver info. */
+#define ETHTOOL_GREGS		0x00000004 /* Get NIC registers. */
+#define ETHTOOL_GWOL		0x00000005 /* Get wake-on-lan options. */
+#define ETHTOOL_SWOL		0x00000006 /* Set wake-on-lan options. */
+#define ETHTOOL_GMSGLVL		0x00000007 /* Get driver message level */
+#define ETHTOOL_SMSGLVL		0x00000008 /* Set driver msg level. */
+#define ETHTOOL_NWAY_RST	0x00000009 /* Restart autonegotiation. */
+/* Get link status for host, i.e. whether the interface *and* the
+ * physical port (if there is one) are up (ethtool_value). */
+#define ETHTOOL_GLINK		0x0000000a
+#define ETHTOOL_GEEPROM		0x0000000b /* Get EEPROM data */
+#define ETHTOOL_SEEPROM		0x0000000c /* Set EEPROM data. */
+#define ETHTOOL_GCOALESCE	0x0000000e /* Get coalesce config */
+#define ETHTOOL_SCOALESCE	0x0000000f /* Set coalesce config. */
+#define ETHTOOL_GRINGPARAM	0x00000010 /* Get ring parameters */
+#define ETHTOOL_SRINGPARAM	0x00000011 /* Set ring parameters. */
+#define ETHTOOL_GPAUSEPARAM	0x00000012 /* Get pause parameters */
+#define ETHTOOL_SPAUSEPARAM	0x00000013 /* Set pause parameters. */
+#define ETHTOOL_GRXCSUM		0x00000014 /* Get RX hw csum enable (ethtool_value) */
+#define ETHTOOL_SRXCSUM		0x00000015 /* Set RX hw csum enable (ethtool_value) */
+#define ETHTOOL_GTXCSUM		0x00000016 /* Get TX hw csum enable (ethtool_value) */
+#define ETHTOOL_STXCSUM		0x00000017 /* Set TX hw csum enable (ethtool_value) */
+#define ETHTOOL_GSG		0x00000018 /* Get scatter-gather enable
+					    * (ethtool_value) */
+#define ETHTOOL_SSG		0x00000019 /* Set scatter-gather enable
+					    * (ethtool_value). */
+#define ETHTOOL_TEST		0x0000001a /* execute NIC self-test. */
+#define ETHTOOL_GSTRINGS	0x0000001b /* get specified string set */
+#define ETHTOOL_PHYS_ID		0x0000001c /* identify the NIC */
+#define ETHTOOL_GSTATS		0x0000001d /* get NIC-specific statistics */
+#define ETHTOOL_GTSO		0x0000001e /* Get TSO enable (ethtool_value) */
+#define ETHTOOL_STSO		0x0000001f /* Set TSO enable (ethtool_value) */
+#define ETHTOOL_GPERMADDR	0x00000020 /* Get permanent hardware address */
+#define ETHTOOL_GUFO		0x00000021 /* Get UFO enable (ethtool_value) */
+#define ETHTOOL_SUFO		0x00000022 /* Set UFO enable (ethtool_value) */
+#define ETHTOOL_GGSO		0x00000023 /* Get GSO enable (ethtool_value) */
+#define ETHTOOL_SGSO		0x00000024 /* Set GSO enable (ethtool_value) */
+#define ETHTOOL_GFLAGS		0x00000025 /* Get flags bitmap(ethtool_value) */
+#define ETHTOOL_SFLAGS		0x00000026 /* Set flags bitmap(ethtool_value) */
+#define ETHTOOL_GPFLAGS		0x00000027 /* Get driver-private flags bitmap */
+#define ETHTOOL_SPFLAGS		0x00000028 /* Set driver-private flags bitmap */
+
+#define ETHTOOL_GRXFH		0x00000029 /* Get RX flow hash configuration */
+#define ETHTOOL_SRXFH		0x0000002a /* Set RX flow hash configuration */
+#define ETHTOOL_GGRO		0x0000002b /* Get GRO enable (ethtool_value) */
+#define ETHTOOL_SGRO		0x0000002c /* Set GRO enable (ethtool_value) */
+#define ETHTOOL_GRXRINGS	0x0000002d /* Get RX rings available for LB */
+#define ETHTOOL_GRXCLSRLCNT	0x0000002e /* Get RX class rule count */
+#define ETHTOOL_GRXCLSRULE	0x0000002f /* Get RX classification rule */
+#define ETHTOOL_GRXCLSRLALL	0x00000030 /* Get all RX classification rule */
+#define ETHTOOL_SRXCLSRLDEL	0x00000031 /* Delete RX classification rule */
+#define ETHTOOL_SRXCLSRLINS	0x00000032 /* Insert RX classification rule */
+#define ETHTOOL_FLASHDEV	0x00000033 /* Flash firmware to device */
+#define ETHTOOL_RESET		0x00000034 /* Reset hardware */
+#define ETHTOOL_SRXNTUPLE	0x00000035 /* Add an n-tuple filter to device */
+#define ETHTOOL_GRXNTUPLE	0x00000036 /* Get n-tuple filters from device */
+#define ETHTOOL_GSSET_INFO	0x00000037 /* Get string set info */
+#define ETHTOOL_GRXFHINDIR	0x00000038 /* Get RX flow hash indir'n table */
+#define ETHTOOL_SRXFHINDIR	0x00000039 /* Set RX flow hash indir'n table */
+
+#define ETHTOOL_GFEATURES	0x0000003a /* Get device offload settings */
+#define ETHTOOL_SFEATURES	0x0000003b /* Change device offload settings */
+
+/* compatibility with older code */
+#define SPARC_ETH_GSET		ETHTOOL_GSET
+#define SPARC_ETH_SSET		ETHTOOL_SSET
+
+/* Indicates what features are supported by the interface. */
+#define SUPPORTED_10baseT_Half		(1 << 0)
+#define SUPPORTED_10baseT_Full		(1 << 1)
+#define SUPPORTED_100baseT_Half		(1 << 2)
+#define SUPPORTED_100baseT_Full		(1 << 3)
+#define SUPPORTED_1000baseT_Half	(1 << 4)
+#define SUPPORTED_1000baseT_Full	(1 << 5)
+#define SUPPORTED_Autoneg		(1 << 6)
+#define SUPPORTED_TP			(1 << 7)
+#define SUPPORTED_AUI			(1 << 8)
+#define SUPPORTED_MII			(1 << 9)
+#define SUPPORTED_FIBRE			(1 << 10)
+#define SUPPORTED_BNC			(1 << 11)
+#define SUPPORTED_10000baseT_Full	(1 << 12)
+#define SUPPORTED_Pause			(1 << 13)
+#define SUPPORTED_Asym_Pause		(1 << 14)
+#define SUPPORTED_2500baseX_Full	(1 << 15)
+#define SUPPORTED_Backplane		(1 << 16)
+#define SUPPORTED_1000baseKX_Full	(1 << 17)
+#define SUPPORTED_10000baseKX4_Full	(1 << 18)
+#define SUPPORTED_10000baseKR_Full	(1 << 19)
+#define SUPPORTED_10000baseR_FEC	(1 << 20)
+
+/* Indicates what features are advertised by the interface. */
+#define ADVERTISED_10baseT_Half		(1 << 0)
+#define ADVERTISED_10baseT_Full		(1 << 1)
+#define ADVERTISED_100baseT_Half	(1 << 2)
+#define ADVERTISED_100baseT_Full	(1 << 3)
+#define ADVERTISED_1000baseT_Half	(1 << 4)
+#define ADVERTISED_1000baseT_Full	(1 << 5)
+#define ADVERTISED_Autoneg		(1 << 6)
+#define ADVERTISED_TP			(1 << 7)
+#define ADVERTISED_AUI			(1 << 8)
+#define ADVERTISED_MII			(1 << 9)
+#define ADVERTISED_FIBRE		(1 << 10)
+#define ADVERTISED_BNC			(1 << 11)
+#define ADVERTISED_10000baseT_Full	(1 << 12)
+#define ADVERTISED_Pause		(1 << 13)
+#define ADVERTISED_Asym_Pause		(1 << 14)
+#define ADVERTISED_2500baseX_Full	(1 << 15)
+#define ADVERTISED_Backplane		(1 << 16)
+#define ADVERTISED_1000baseKX_Full	(1 << 17)
+#define ADVERTISED_10000baseKX4_Full	(1 << 18)
+#define ADVERTISED_10000baseKR_Full	(1 << 19)
+#define ADVERTISED_10000baseR_FEC	(1 << 20)
+
+/* The following are all involved in forcing a particular link
+ * mode for the device for setting things.  When getting the
+ * devices settings, these indicate the current mode and whether
+ * it was foced up into this mode or autonegotiated.
+ */
+
+/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
+#define SPEED_10		10
+#define SPEED_100		100
+#define SPEED_1000		1000
+#define SPEED_2500		2500
+#define SPEED_10000		10000
+
+/* Duplex, half or full. */
+#define DUPLEX_HALF		0x00
+#define DUPLEX_FULL		0x01
+
+/* Which connector port. */
+#define PORT_TP			0x00
+#define PORT_AUI		0x01
+#define PORT_MII		0x02
+#define PORT_FIBRE		0x03
+#define PORT_BNC		0x04
+#define PORT_DA			0x05
+#define PORT_NONE		0xef
+#define PORT_OTHER		0xff
+
+/* Which transceiver to use. */
+#define XCVR_INTERNAL		0x00
+#define XCVR_EXTERNAL		0x01
+#define XCVR_DUMMY1		0x02
+#define XCVR_DUMMY2		0x03
+#define XCVR_DUMMY3		0x04
+
+/* Enable or disable autonegotiation.  If this is set to enable,
+ * the forced link modes above are completely ignored.
+ */
+#define AUTONEG_DISABLE		0x00
+#define AUTONEG_ENABLE		0x01
+
+/* Mode MDI or MDI-X */
+#define ETH_TP_MDI_INVALID	0x00
+#define ETH_TP_MDI		0x01
+#define ETH_TP_MDI_X		0x02
+
+/* Wake-On-Lan options. */
+#define WAKE_PHY		(1 << 0)
+#define WAKE_UCAST		(1 << 1)
+#define WAKE_MCAST		(1 << 2)
+#define WAKE_BCAST		(1 << 3)
+#define WAKE_ARP		(1 << 4)
+#define WAKE_MAGIC		(1 << 5)
+#define WAKE_MAGICSECURE	(1 << 6) /* only meaningful if WAKE_MAGIC */
+
+/* L2-L4 network traffic flow types */
+#define	TCP_V4_FLOW	0x01	/* hash or spec (tcp_ip4_spec) */
+#define	UDP_V4_FLOW	0x02	/* hash or spec (udp_ip4_spec) */
+#define	SCTP_V4_FLOW	0x03	/* hash or spec (sctp_ip4_spec) */
+#define	AH_ESP_V4_FLOW	0x04	/* hash only */
+#define	TCP_V6_FLOW	0x05	/* hash only */
+#define	UDP_V6_FLOW	0x06	/* hash only */
+#define	SCTP_V6_FLOW	0x07	/* hash only */
+#define	AH_ESP_V6_FLOW	0x08	/* hash only */
+#define	AH_V4_FLOW	0x09	/* hash or spec (ah_ip4_spec) */
+#define	ESP_V4_FLOW	0x0a	/* hash or spec (esp_ip4_spec) */
+#define	AH_V6_FLOW	0x0b	/* hash only */
+#define	ESP_V6_FLOW	0x0c	/* hash only */
+#define	IP_USER_FLOW	0x0d	/* spec only (usr_ip4_spec) */
+#define	IPV4_FLOW	0x10	/* hash only */
+#define	IPV6_FLOW	0x11	/* hash only */
+#define	ETHER_FLOW	0x12	/* spec only (ether_spec) */
+
+/* L3-L4 network traffic flow hash options */
+#define	RXH_L2DA	(1 << 1)
+#define	RXH_VLAN	(1 << 2)
+#define	RXH_L3_PROTO	(1 << 3)
+#define	RXH_IP_SRC	(1 << 4)
+#define	RXH_IP_DST	(1 << 5)
+#define	RXH_L4_B_0_1	(1 << 6) /* src port in case of TCP/UDP/SCTP */
+#define	RXH_L4_B_2_3	(1 << 7) /* dst port in case of TCP/UDP/SCTP */
+#define	RXH_DISCARD	(1 << 31)
+
+#define	RX_CLS_FLOW_DISC	0xffffffffffffffffULL
+
+/* Reset flags */
+/* The reset() operation must clear the flags for the components which
+ * were actually reset.  On successful return, the flags indicate the
+ * components which were not reset, either because they do not exist
+ * in the hardware or because they cannot be reset independently.  The
+ * driver must never reset any components that were not requested.
+ */
+enum ethtool_reset_flags {
+	/* These flags represent components dedicated to the interface
+	 * the command is addressed to.  Shift any flag left by
+	 * ETH_RESET_SHARED_SHIFT to reset a shared component of the
+	 * same type.
+	 */
+	ETH_RESET_MGMT		= 1 << 0,	/* Management processor */
+	ETH_RESET_IRQ		= 1 << 1,	/* Interrupt requester */
+	ETH_RESET_DMA		= 1 << 2,	/* DMA engine */
+	ETH_RESET_FILTER	= 1 << 3,	/* Filtering/flow direction */
+	ETH_RESET_OFFLOAD	= 1 << 4,	/* Protocol offload */
+	ETH_RESET_MAC		= 1 << 5,	/* Media access controller */
+	ETH_RESET_PHY		= 1 << 6,	/* Transceiver/PHY */
+	ETH_RESET_RAM		= 1 << 7,	/* RAM shared between
+						 * multiple components */
+
+	ETH_RESET_DEDICATED	= 0x0000ffff,	/* All components dedicated to
+						 * this interface */
+	ETH_RESET_ALL		= 0xffffffff,	/* All components used by this
+						 * interface, even if shared */
+};
+#define ETH_RESET_SHARED_SHIFT	16
+
+#endif /* _LINUX_ETHTOOL_H */
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
new file mode 100644
index 0000000..022d772
--- /dev/null
+++ b/include/linux/mdio.h
@@ -0,0 +1,278 @@
+/*
+ * linux/mdio.h: definitions for MDIO (clause 45) transceivers
+ * Copyright 2006-2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef __LINUX_MDIO_H__
+#define __LINUX_MDIO_H__
+
+#include <linux/mii.h>
+
+/* MDIO Manageable Devices (MMDs). */
+#define MDIO_MMD_PMAPMD		1	/* Physical Medium Attachment/
+					 * Physical Medium Dependent */
+#define MDIO_MMD_WIS		2	/* WAN Interface Sublayer */
+#define MDIO_MMD_PCS		3	/* Physical Coding Sublayer */
+#define MDIO_MMD_PHYXS		4	/* PHY Extender Sublayer */
+#define MDIO_MMD_DTEXS		5	/* DTE Extender Sublayer */
+#define MDIO_MMD_TC		6	/* Transmission Convergence */
+#define MDIO_MMD_AN		7	/* Auto-Negotiation */
+#define MDIO_MMD_C22EXT		29	/* Clause 22 extension */
+#define MDIO_MMD_VEND1		30	/* Vendor specific 1 */
+#define MDIO_MMD_VEND2		31	/* Vendor specific 2 */
+
+/* Generic MDIO registers. */
+#define MDIO_CTRL1		MII_BMCR
+#define MDIO_STAT1		MII_BMSR
+#define MDIO_DEVID1		MII_PHYSID1
+#define MDIO_DEVID2		MII_PHYSID2
+#define MDIO_SPEED		4	/* Speed ability */
+#define MDIO_DEVS1		5	/* Devices in package */
+#define MDIO_DEVS2		6
+#define MDIO_CTRL2		7	/* 10G control 2 */
+#define MDIO_STAT2		8	/* 10G status 2 */
+#define MDIO_PMA_TXDIS		9	/* 10G PMA/PMD transmit disable */
+#define MDIO_PMA_RXDET		10	/* 10G PMA/PMD receive signal detect */
+#define MDIO_PMA_EXTABLE	11	/* 10G PMA/PMD extended ability */
+#define MDIO_PKGID1		14	/* Package identifier */
+#define MDIO_PKGID2		15
+#define MDIO_AN_ADVERTISE	16	/* AN advertising (base page) */
+#define MDIO_AN_LPA		19	/* AN LP abilities (base page) */
+#define MDIO_PHYXS_LNSTAT	24	/* PHY XGXS lane state */
+
+/* Media-dependent registers. */
+#define MDIO_PMA_10GBT_SWAPPOL	130	/* 10GBASE-T pair swap & polarity */
+#define MDIO_PMA_10GBT_TXPWR	131	/* 10GBASE-T TX power control */
+#define MDIO_PMA_10GBT_SNR	133	/* 10GBASE-T SNR margin, lane A.
+					 * Lanes B-D are numbered 134-136. */
+#define MDIO_PMA_10GBR_FECABLE	170	/* 10GBASE-R FEC ability */
+#define MDIO_PCS_10GBX_STAT1	24	/* 10GBASE-X PCS status 1 */
+#define MDIO_PCS_10GBRT_STAT1	32	/* 10GBASE-R/-T PCS status 1 */
+#define MDIO_PCS_10GBRT_STAT2	33	/* 10GBASE-R/-T PCS status 2 */
+#define MDIO_AN_10GBT_CTRL	32	/* 10GBASE-T auto-negotiation control */
+#define MDIO_AN_10GBT_STAT	33	/* 10GBASE-T auto-negotiation status */
+#define MDIO_AN_EEE_ADV		60	/* EEE advertisement */
+
+/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
+#define MDIO_PMA_LASI_RXCTRL	0x9000	/* RX_ALARM control */
+#define MDIO_PMA_LASI_TXCTRL	0x9001	/* TX_ALARM control */
+#define MDIO_PMA_LASI_CTRL	0x9002	/* LASI control */
+#define MDIO_PMA_LASI_RXSTAT	0x9003	/* RX_ALARM status */
+#define MDIO_PMA_LASI_TXSTAT	0x9004	/* TX_ALARM status */
+#define MDIO_PMA_LASI_STAT	0x9005	/* LASI status */
+
+/* Control register 1. */
+/* Enable extended speed selection */
+#define MDIO_CTRL1_SPEEDSELEXT		(BMCR_SPEED1000 | BMCR_SPEED100)
+/* All speed selection bits */
+#define MDIO_CTRL1_SPEEDSEL		(MDIO_CTRL1_SPEEDSELEXT | 0x003c)
+#define MDIO_CTRL1_FULLDPLX		BMCR_FULLDPLX
+#define MDIO_CTRL1_LPOWER		BMCR_PDOWN
+#define MDIO_CTRL1_RESET		BMCR_RESET
+#define MDIO_PMA_CTRL1_LOOPBACK		0x0001
+#define MDIO_PMA_CTRL1_SPEED1000	BMCR_SPEED1000
+#define MDIO_PMA_CTRL1_SPEED100		BMCR_SPEED100
+#define MDIO_PCS_CTRL1_LOOPBACK		BMCR_LOOPBACK
+#define MDIO_PHYXS_CTRL1_LOOPBACK	BMCR_LOOPBACK
+#define MDIO_AN_CTRL1_RESTART		BMCR_ANRESTART
+#define MDIO_AN_CTRL1_ENABLE		BMCR_ANENABLE
+#define MDIO_AN_CTRL1_XNP		0x2000	/* Enable extended next page */
+
+/* 10 Gb/s */
+#define MDIO_CTRL1_SPEED10G		(MDIO_CTRL1_SPEEDSELEXT | 0x00)
+/* 10PASS-TS/2BASE-TL */
+#define MDIO_CTRL1_SPEED10P2B		(MDIO_CTRL1_SPEEDSELEXT | 0x04)
+
+/* Status register 1. */
+#define MDIO_STAT1_LPOWERABLE		0x0002	/* Low-power ability */
+#define MDIO_STAT1_LSTATUS		BMSR_LSTATUS
+#define MDIO_STAT1_FAULT		0x0080	/* Fault */
+#define MDIO_AN_STAT1_LPABLE		0x0001	/* Link partner AN ability */
+#define MDIO_AN_STAT1_ABLE		BMSR_ANEGCAPABLE
+#define MDIO_AN_STAT1_RFAULT		BMSR_RFAULT
+#define MDIO_AN_STAT1_COMPLETE		BMSR_ANEGCOMPLETE
+#define MDIO_AN_STAT1_PAGE		0x0040	/* Page received */
+#define MDIO_AN_STAT1_XNP		0x0080	/* Extended next page status */
+
+/* Speed register. */
+#define MDIO_SPEED_10G			0x0001	/* 10G capable */
+#define MDIO_PMA_SPEED_2B		0x0002	/* 2BASE-TL capable */
+#define MDIO_PMA_SPEED_10P		0x0004	/* 10PASS-TS capable */
+#define MDIO_PMA_SPEED_1000		0x0010	/* 1000M capable */
+#define MDIO_PMA_SPEED_100		0x0020	/* 100M capable */
+#define MDIO_PMA_SPEED_10		0x0040	/* 10M capable */
+#define MDIO_PCS_SPEED_10P2B		0x0002	/* 10PASS-TS/2BASE-TL capable */
+
+/* Device present registers. */
+#define MDIO_DEVS_PRESENT(devad)	(1 << (devad))
+#define MDIO_DEVS_PMAPMD		MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD)
+#define MDIO_DEVS_WIS			MDIO_DEVS_PRESENT(MDIO_MMD_WIS)
+#define MDIO_DEVS_PCS			MDIO_DEVS_PRESENT(MDIO_MMD_PCS)
+#define MDIO_DEVS_PHYXS			MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS)
+#define MDIO_DEVS_DTEXS			MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS)
+#define MDIO_DEVS_TC			MDIO_DEVS_PRESENT(MDIO_MMD_TC)
+#define MDIO_DEVS_AN			MDIO_DEVS_PRESENT(MDIO_MMD_AN)
+#define MDIO_DEVS_C22EXT		MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT)
+#define MDIO_DEVS_VEND1			MDIO_DEVS_PRESENT(MDIO_MMD_VEND1)
+#define MDIO_DEVS_VEND2			MDIO_DEVS_PRESENT(MDIO_MMD_VEND2)
+
+
+/* Control register 2. */
+#define MDIO_PMA_CTRL2_TYPE		0x000f	/* PMA/PMD type selection */
+#define MDIO_PMA_CTRL2_10GBCX4		0x0000	/* 10GBASE-CX4 type */
+#define MDIO_PMA_CTRL2_10GBEW		0x0001	/* 10GBASE-EW type */
+#define MDIO_PMA_CTRL2_10GBLW		0x0002	/* 10GBASE-LW type */
+#define MDIO_PMA_CTRL2_10GBSW		0x0003	/* 10GBASE-SW type */
+#define MDIO_PMA_CTRL2_10GBLX4		0x0004	/* 10GBASE-LX4 type */
+#define MDIO_PMA_CTRL2_10GBER		0x0005	/* 10GBASE-ER type */
+#define MDIO_PMA_CTRL2_10GBLR		0x0006	/* 10GBASE-LR type */
+#define MDIO_PMA_CTRL2_10GBSR		0x0007	/* 10GBASE-SR type */
+#define MDIO_PMA_CTRL2_10GBLRM		0x0008	/* 10GBASE-LRM type */
+#define MDIO_PMA_CTRL2_10GBT		0x0009	/* 10GBASE-T type */
+#define MDIO_PMA_CTRL2_10GBKX4		0x000a	/* 10GBASE-KX4 type */
+#define MDIO_PMA_CTRL2_10GBKR		0x000b	/* 10GBASE-KR type */
+#define MDIO_PMA_CTRL2_1000BT		0x000c	/* 1000BASE-T type */
+#define MDIO_PMA_CTRL2_1000BKX		0x000d	/* 1000BASE-KX type */
+#define MDIO_PMA_CTRL2_100BTX		0x000e	/* 100BASE-TX type */
+#define MDIO_PMA_CTRL2_10BT		0x000f	/* 10BASE-T type */
+#define MDIO_PCS_CTRL2_TYPE		0x0003	/* PCS type selection */
+#define MDIO_PCS_CTRL2_10GBR		0x0000	/* 10GBASE-R type */
+#define MDIO_PCS_CTRL2_10GBX		0x0001	/* 10GBASE-X type */
+#define MDIO_PCS_CTRL2_10GBW		0x0002	/* 10GBASE-W type */
+#define MDIO_PCS_CTRL2_10GBT		0x0003	/* 10GBASE-T type */
+
+/* Status register 2. */
+#define MDIO_STAT2_RXFAULT		0x0400	/* Receive fault */
+#define MDIO_STAT2_TXFAULT		0x0800	/* Transmit fault */
+#define MDIO_STAT2_DEVPRST		0xc000	/* Device present */
+#define MDIO_STAT2_DEVPRST_VAL		0x8000	/* Device present value */
+#define MDIO_PMA_STAT2_LBABLE		0x0001	/* PMA loopback ability */
+#define MDIO_PMA_STAT2_10GBEW		0x0002	/* 10GBASE-EW ability */
+#define MDIO_PMA_STAT2_10GBLW		0x0004	/* 10GBASE-LW ability */
+#define MDIO_PMA_STAT2_10GBSW		0x0008	/* 10GBASE-SW ability */
+#define MDIO_PMA_STAT2_10GBLX4		0x0010	/* 10GBASE-LX4 ability */
+#define MDIO_PMA_STAT2_10GBER		0x0020	/* 10GBASE-ER ability */
+#define MDIO_PMA_STAT2_10GBLR		0x0040	/* 10GBASE-LR ability */
+#define MDIO_PMA_STAT2_10GBSR		0x0080	/* 10GBASE-SR ability */
+#define MDIO_PMD_STAT2_TXDISAB		0x0100	/* PMD TX disable ability */
+#define MDIO_PMA_STAT2_EXTABLE		0x0200	/* Extended abilities */
+#define MDIO_PMA_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
+#define MDIO_PMA_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
+#define MDIO_PCS_STAT2_10GBR		0x0001	/* 10GBASE-R capable */
+#define MDIO_PCS_STAT2_10GBX		0x0002	/* 10GBASE-X capable */
+#define MDIO_PCS_STAT2_10GBW		0x0004	/* 10GBASE-W capable */
+#define MDIO_PCS_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
+#define MDIO_PCS_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
+
+/* Transmit disable register. */
+#define MDIO_PMD_TXDIS_GLOBAL		0x0001	/* Global PMD TX disable */
+#define MDIO_PMD_TXDIS_0		0x0002	/* PMD TX disable 0 */
+#define MDIO_PMD_TXDIS_1		0x0004	/* PMD TX disable 1 */
+#define MDIO_PMD_TXDIS_2		0x0008	/* PMD TX disable 2 */
+#define MDIO_PMD_TXDIS_3		0x0010	/* PMD TX disable 3 */
+
+/* Receive signal detect register. */
+#define MDIO_PMD_RXDET_GLOBAL		0x0001	/* Global PMD RX signal detect */
+#define MDIO_PMD_RXDET_0		0x0002	/* PMD RX signal detect 0 */
+#define MDIO_PMD_RXDET_1		0x0004	/* PMD RX signal detect 1 */
+#define MDIO_PMD_RXDET_2		0x0008	/* PMD RX signal detect 2 */
+#define MDIO_PMD_RXDET_3		0x0010	/* PMD RX signal detect 3 */
+
+/* Extended abilities register. */
+#define MDIO_PMA_EXTABLE_10GCX4		0x0001	/* 10GBASE-CX4 ability */
+#define MDIO_PMA_EXTABLE_10GBLRM	0x0002	/* 10GBASE-LRM ability */
+#define MDIO_PMA_EXTABLE_10GBT		0x0004	/* 10GBASE-T ability */
+#define MDIO_PMA_EXTABLE_10GBKX4	0x0008	/* 10GBASE-KX4 ability */
+#define MDIO_PMA_EXTABLE_10GBKR		0x0010	/* 10GBASE-KR ability */
+#define MDIO_PMA_EXTABLE_1000BT		0x0020	/* 1000BASE-T ability */
+#define MDIO_PMA_EXTABLE_1000BKX	0x0040	/* 1000BASE-KX ability */
+#define MDIO_PMA_EXTABLE_100BTX		0x0080	/* 100BASE-TX ability */
+#define MDIO_PMA_EXTABLE_10BT		0x0100	/* 10BASE-T ability */
+
+/* PHY XGXS lane state register. */
+#define MDIO_PHYXS_LNSTAT_SYNC0		0x0001
+#define MDIO_PHYXS_LNSTAT_SYNC1		0x0002
+#define MDIO_PHYXS_LNSTAT_SYNC2		0x0004
+#define MDIO_PHYXS_LNSTAT_SYNC3		0x0008
+#define MDIO_PHYXS_LNSTAT_ALIGN		0x1000
+
+/* PMA 10GBASE-T pair swap & polarity */
+#define MDIO_PMA_10GBT_SWAPPOL_ABNX	0x0001	/* Pair A/B uncrossed */
+#define MDIO_PMA_10GBT_SWAPPOL_CDNX	0x0002	/* Pair C/D uncrossed */
+#define MDIO_PMA_10GBT_SWAPPOL_AREV	0x0100	/* Pair A polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_BREV	0x0200	/* Pair B polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_CREV	0x0400	/* Pair C polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_DREV	0x0800	/* Pair D polarity reversed */
+
+/* PMA 10GBASE-T TX power register. */
+#define MDIO_PMA_10GBT_TXPWR_SHORT	0x0001	/* Short-reach mode */
+
+/* PMA 10GBASE-T SNR registers. */
+/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */
+#define MDIO_PMA_10GBT_SNR_BIAS		0x8000
+#define MDIO_PMA_10GBT_SNR_MAX		127
+
+/* PMA 10GBASE-R FEC ability register. */
+#define MDIO_PMA_10GBR_FECABLE_ABLE	0x0001	/* FEC ability */
+#define MDIO_PMA_10GBR_FECABLE_ERRABLE	0x0002	/* FEC error indic. ability */
+
+/* PCS 10GBASE-R/-T status register 1. */
+#define MDIO_PCS_10GBRT_STAT1_BLKLK	0x0001	/* Block lock attained */
+
+/* PCS 10GBASE-R/-T status register 2. */
+#define MDIO_PCS_10GBRT_STAT2_ERR	0x00ff
+#define MDIO_PCS_10GBRT_STAT2_BER	0x3f00
+
+/* AN 10GBASE-T control register. */
+#define MDIO_AN_10GBT_CTRL_ADV10G	0x1000	/* Advertise 10GBASE-T */
+
+/* AN 10GBASE-T status register. */
+#define MDIO_AN_10GBT_STAT_LPTRR	0x0200	/* LP training reset req. */
+#define MDIO_AN_10GBT_STAT_LPLTABLE	0x0400	/* LP loop timing ability */
+#define MDIO_AN_10GBT_STAT_LP10G	0x0800	/* LP is 10GBT capable */
+#define MDIO_AN_10GBT_STAT_REMOK	0x1000	/* Remote OK */
+#define MDIO_AN_10GBT_STAT_LOCOK	0x2000	/* Local OK */
+#define MDIO_AN_10GBT_STAT_MS		0x4000	/* Master/slave config */
+#define MDIO_AN_10GBT_STAT_MSFLT	0x8000	/* Master/slave config fault */
+
+/* AN EEE Advertisement register. */
+#define MDIO_AN_EEE_ADV_100TX		0x0002	/* Advertise 100TX EEE cap */
+#define MDIO_AN_EEE_ADV_1000T		0x0004	/* Advertise 1000T EEE cap */
+
+/* LASI RX_ALARM control/status registers. */
+#define MDIO_PMA_LASI_RX_PHYXSLFLT	0x0001	/* PHY XS RX local fault */
+#define MDIO_PMA_LASI_RX_PCSLFLT	0x0008	/* PCS RX local fault */
+#define MDIO_PMA_LASI_RX_PMALFLT	0x0010	/* PMA/PMD RX local fault */
+#define MDIO_PMA_LASI_RX_OPTICPOWERFLT	0x0020	/* RX optical power fault */
+#define MDIO_PMA_LASI_RX_WISLFLT	0x0200	/* WIS local fault */
+
+/* LASI TX_ALARM control/status registers. */
+#define MDIO_PMA_LASI_TX_PHYXSLFLT	0x0001	/* PHY XS TX local fault */
+#define MDIO_PMA_LASI_TX_PCSLFLT	0x0008	/* PCS TX local fault */
+#define MDIO_PMA_LASI_TX_PMALFLT	0x0010	/* PMA/PMD TX local fault */
+#define MDIO_PMA_LASI_TX_LASERPOWERFLT	0x0080	/* Laser output power fault */
+#define MDIO_PMA_LASI_TX_LASERTEMPFLT	0x0100	/* Laser temperature fault */
+#define MDIO_PMA_LASI_TX_LASERBICURRFLT	0x0200	/* Laser bias current fault */
+
+/* LASI control/status registers. */
+#define MDIO_PMA_LASI_LSALARM		0x0001	/* LS_ALARM enable/status */
+#define MDIO_PMA_LASI_TXALARM		0x0002	/* TX_ALARM enable/status */
+#define MDIO_PMA_LASI_RXALARM		0x0004	/* RX_ALARM enable/status */
+
+/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */
+
+#define MDIO_PHY_ID_C45			0x8000
+#define MDIO_PHY_ID_PRTAD		0x03e0
+#define MDIO_PHY_ID_DEVAD		0x001f
+#define MDIO_PHY_ID_C45_MASK						\
+	(MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD)
+
+#define MDIO_PRTAD_NONE			(-1)
+#define MDIO_DEVAD_NONE			(-1)
+#define MDIO_EMULATE_C22		4
+
+#endif /* __LINUX_MDIO_H__ */
diff --git a/include/miiphy.h b/include/miiphy.h
index 42dc127..7e70cf8 100644
--- a/include/miiphy.h
+++ b/include/miiphy.h
@@ -34,35 +34,52 @@
 #ifndef _miiphy_h_
 #define _miiphy_h_
 
+#include <common.h>
 #include <linux/mii.h>
+#include <linux/list.h>
 #include <net.h>
+#include <phy.h>
 
-int miiphy_read (const char *devname, unsigned char addr, unsigned char reg,
+struct legacy_mii_dev {
+	int (*read)(const char *devname, unsigned char addr,
+		     unsigned char reg, unsigned short *value);
+	int (*write)(const char *devname, unsigned char addr,
+		      unsigned char reg, unsigned short value);
+};
+
+int miiphy_read(const char *devname, unsigned char addr, unsigned char reg,
 		 unsigned short *value);
-int miiphy_write (const char *devname, unsigned char addr, unsigned char reg,
+int miiphy_write(const char *devname, unsigned char addr, unsigned char reg,
 		  unsigned short value);
-int miiphy_info (const char *devname, unsigned char addr, unsigned int *oui,
+int miiphy_info(const char *devname, unsigned char addr, unsigned int *oui,
 		 unsigned char *model, unsigned char *rev);
-int miiphy_reset (const char *devname, unsigned char addr);
-int miiphy_speed (const char *devname, unsigned char addr);
-int miiphy_duplex (const char *devname, unsigned char addr);
-int miiphy_is_1000base_x (const char *devname, unsigned char addr);
+int miiphy_reset(const char *devname, unsigned char addr);
+int miiphy_speed(const char *devname, unsigned char addr);
+int miiphy_duplex(const char *devname, unsigned char addr);
+int miiphy_is_1000base_x(const char *devname, unsigned char addr);
 #ifdef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-int miiphy_link (const char *devname, unsigned char addr);
+int miiphy_link(const char *devname, unsigned char addr);
 #endif
 
-void miiphy_init (void);
+void miiphy_init(void);
 
-void miiphy_register (const char *devname,
-		      int (*read) (const char *devname, unsigned char addr,
+void miiphy_register(const char *devname,
+		      int (*read)(const char *devname, unsigned char addr,
 				   unsigned char reg, unsigned short *value),
-		      int (*write) (const char *devname, unsigned char addr,
+		      int (*write)(const char *devname, unsigned char addr,
 				    unsigned char reg, unsigned short value));
 
-int miiphy_set_current_dev (const char *devname);
-const char *miiphy_get_current_dev (void);
+int miiphy_set_current_dev(const char *devname);
+const char *miiphy_get_current_dev(void);
+struct mii_dev *mdio_get_current_dev(void);
+struct mii_dev *miiphy_get_dev_by_name(const char *devname);
+struct phy_device *mdio_phydev_for_ethname(const char *devname);
+
+void miiphy_listdev(void);
 
-void miiphy_listdev (void);
+struct mii_dev *mdio_alloc(void);
+int mdio_register(struct mii_dev *bus);
+void mdio_list_devices(void);
 
 #ifdef CONFIG_BITBANGMII
 
@@ -85,10 +102,10 @@ struct bb_miiphy_bus {
 extern struct bb_miiphy_bus bb_miiphy_buses[];
 extern int bb_miiphy_buses_num;
 
-void bb_miiphy_init (void);
-int bb_miiphy_read (const char *devname, unsigned char addr,
+void bb_miiphy_init(void);
+int bb_miiphy_read(const char *devname, unsigned char addr,
 		    unsigned char reg, unsigned short *value);
-int bb_miiphy_write (const char *devname, unsigned char addr,
+int bb_miiphy_write(const char *devname, unsigned char addr,
 		     unsigned char reg, unsigned short value);
 #endif
 
diff --git a/include/phy.h b/include/phy.h
new file mode 100644
index 0000000..d5817bf
--- /dev/null
+++ b/include/phy.h
@@ -0,0 +1,229 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *	Andy Fleming <afleming@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * This file pretty much stolen from Linux's mii.h/ethtool.h/phy.h
+ */
+
+#ifndef _PHY_H
+#define _PHY_H
+
+#include <linux/list.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/mdio.h>
+
+#define PHY_MAX_ADDR 32
+
+#define PHY_BASIC_FEATURES	(SUPPORTED_10baseT_Half | \
+				 SUPPORTED_10baseT_Full | \
+				 SUPPORTED_100baseT_Half | \
+				 SUPPORTED_100baseT_Full | \
+				 SUPPORTED_Autoneg | \
+				 SUPPORTED_TP | \
+				 SUPPORTED_MII)
+
+#define PHY_GBIT_FEATURES	(PHY_BASIC_FEATURES | \
+				 SUPPORTED_1000baseT_Half | \
+				 SUPPORTED_1000baseT_Full)
+
+#define PHY_10G_FEATURES	(PHY_GBIT_FEATURES | \
+				SUPPORTED_10000baseT_Full)
+
+#define PHY_ANEG_TIMEOUT	4000
+
+
+typedef enum {
+	PHY_INTERFACE_MODE_MII,
+	PHY_INTERFACE_MODE_GMII,
+	PHY_INTERFACE_MODE_SGMII,
+	PHY_INTERFACE_MODE_TBI,
+	PHY_INTERFACE_MODE_RMII,
+	PHY_INTERFACE_MODE_RGMII,
+	PHY_INTERFACE_MODE_RGMII_ID,
+	PHY_INTERFACE_MODE_RGMII_RXID,
+	PHY_INTERFACE_MODE_RGMII_TXID,
+	PHY_INTERFACE_MODE_RTBI,
+	PHY_INTERFACE_MODE_XGMII,
+	PHY_INTERFACE_MODE_NONE	/* Must be last */
+} phy_interface_t;
+
+static const char *phy_interface_strings[] = {
+	[PHY_INTERFACE_MODE_MII]		= "mii",
+	[PHY_INTERFACE_MODE_GMII]		= "gmii",
+	[PHY_INTERFACE_MODE_SGMII]		= "sgmii",
+	[PHY_INTERFACE_MODE_TBI]		= "tbi",
+	[PHY_INTERFACE_MODE_RMII]		= "rmii",
+	[PHY_INTERFACE_MODE_RGMII]		= "rgmii",
+	[PHY_INTERFACE_MODE_RGMII_ID]		= "rgmii-id",
+	[PHY_INTERFACE_MODE_RGMII_RXID]		= "rgmii-rxid",
+	[PHY_INTERFACE_MODE_RGMII_TXID]		= "rgmii-txid",
+	[PHY_INTERFACE_MODE_RTBI]		= "rtbi",
+	[PHY_INTERFACE_MODE_XGMII]		= "xgmii",
+	[PHY_INTERFACE_MODE_NONE]		= "",
+};
+
+static inline const char *phy_string_for_interface(phy_interface_t i)
+{
+	/* Default to unknown */
+	if (i > PHY_INTERFACE_MODE_NONE)
+		i = PHY_INTERFACE_MODE_NONE;
+
+	return phy_interface_strings[i];
+}
+
+
+struct phy_device;
+
+#define MDIO_NAME_LEN 32
+
+struct mii_dev {
+	struct list_head link;
+	char name[MDIO_NAME_LEN];
+	void *priv;
+	int (*read)(struct mii_dev *bus, int addr, int devad, int reg);
+	int (*write)(struct mii_dev *bus, int addr, int devad, int reg,
+			u16 val);
+	int (*reset)(struct mii_dev *bus);
+	struct phy_device *phymap[PHY_MAX_ADDR];
+	u32 phy_mask;
+};
+
+/* struct phy_driver: a structure which defines PHY behavior
+ *
+ * uid will contain a number which represents the PHY.  During
+ * startup, the driver will poll the PHY to find out what its
+ * UID--as defined by registers 2 and 3--is.  The 32-bit result
+ * gotten from the PHY will be masked to
+ * discard any bits which may change based on revision numbers
+ * unimportant to functionality
+ *
+ */
+struct phy_driver {
+	char *name;
+	unsigned int uid;
+	unsigned int mask;
+	unsigned int mmds;
+
+	u32 features;
+
+	/* Called to do any driver startup necessities */
+	/* Will be called during phy_connect */
+	int (*probe)(struct phy_device *phydev);
+
+	/* Called to configure the PHY, and modify the controller
+	 * based on the results.  Should be called after phy_connect */
+	int (*config)(struct phy_device *phydev);
+
+	/* Called when starting up the controller */
+	int (*startup)(struct phy_device *phydev);
+
+	/* Called when bringing down the controller */
+	int (*shutdown)(struct phy_device *phydev);
+
+	struct list_head list;
+};
+
+struct phy_device {
+	/* Information about the PHY type */
+	/* And management functions */
+	struct mii_dev *bus;
+	struct phy_driver *drv;
+	void *priv;
+
+	struct eth_device *dev;
+
+	/* forced speed & duplex (no autoneg)
+	 * partner speed & duplex & pause (autoneg)
+	 */
+	int speed;
+	int duplex;
+
+	/* The most recently read link state */
+	int link;
+	int port;
+	phy_interface_t interface;
+
+	u32 advertising;
+	u32 supported;
+	u32 mmds;
+
+	int autoneg;
+	int addr;
+	int pause;
+	int asym_pause;
+	u32 phy_id;
+	u32 flags;
+};
+
+static inline int phy_read(struct phy_device *phydev, int devad, int regnum)
+{
+	struct mii_dev *bus = phydev->bus;
+
+	return bus->read(bus, phydev->addr, devad, regnum);
+}
+
+static inline int phy_write(struct phy_device *phydev, int devad, int regnum,
+			u16 val)
+{
+	struct mii_dev *bus = phydev->bus;
+
+	return bus->write(bus, phydev->addr, devad, regnum, val);
+}
+
+#ifdef CONFIG_PHYLIB_10G
+extern struct phy_driver gen10g_driver;
+
+/* For now, XGMII is the only 10G interface */
+static inline int is_10g_interface(phy_interface_t interface)
+{
+	return interface == PHY_INTERFACE_MODE_XGMII;
+}
+
+#endif
+
+int phy_init(void);
+int phy_reset(struct phy_device *phydev);
+struct phy_device *phy_connect(struct mii_dev *bus, int addr,
+				struct eth_device *dev,
+				phy_interface_t interface);
+int phy_startup(struct phy_device *phydev);
+int phy_config(struct phy_device *phydev);
+int phy_shutdown(struct phy_device *phydev);
+int phy_register(struct phy_driver *drv);
+int genphy_config_aneg(struct phy_device *phydev);
+int genphy_update_link(struct phy_device *phydev);
+int genphy_config(struct phy_device *phydev);
+int genphy_startup(struct phy_device *phydev);
+int genphy_shutdown(struct phy_device *phydev);
+int gen10g_config(struct phy_device *phydev);
+int gen10g_startup(struct phy_device *phydev);
+int gen10g_shutdown(struct phy_device *phydev);
+int gen10g_discover_mmds(struct phy_device *phydev);
+
+int phy_atheros_init(void);
+int phy_broadcom_init(void);
+int phy_davicom_init(void);
+int phy_lxt_init(void);
+int phy_marvell_init(void);
+int phy_micrel_init(void);
+int phy_natsemi_init(void);
+int phy_realtek_init(void);
+int phy_teranetics_init(void);
+int phy_vitesse_init(void);
+#endif
diff --git a/include/tsec.h b/include/tsec.h
index d56ec2c..8ed30ac 100644
--- a/include/tsec.h
+++ b/include/tsec.h
@@ -7,7 +7,7 @@
  *  terms of the GNU Public License, Version 2, incorporated
  *  herein by reference.
  *
- * Copyright 2004, 2007, 2009  Freescale Semiconductor, Inc.
+ * Copyright 2004, 2007, 2009, 2011  Freescale Semiconductor, Inc.
  * (C) Copyright 2003, Motorola, Inc.
  * maintained by Xianghua Xiao (x.xiao@motorola.com)
  * author Andy Fleming
@@ -19,30 +19,36 @@
 
 #include <net.h>
 #include <config.h>
+#include <phy.h>
+#include <asm/fsl_enet.h>
 
 #define TSEC_SIZE 		0x01000
 #define TSEC_MDIO_OFFSET	0x01000
 
+#define CONFIG_SYS_MDIO_BASE_ADDR (TSEC_BASE_ADDR + 0x520)
+
+#define DEFAULT_MII_NAME "FSL_MDIO"
+
 #define STD_TSEC_INFO(num) \
 {			\
 	.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)), \
-	.miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR), \
-	.miiregs_sgmii = (tsec_mdio_t *)(MDIO_BASE_ADDR \
+	.miiregs_sgmii = (struct tsec_mii_mng *)(CONFIG_SYS_MDIO_BASE_ADDR \
 					 + (num - 1) * TSEC_MDIO_OFFSET), \
 	.devname = CONFIG_TSEC##num##_NAME, \
 	.phyaddr = TSEC##num##_PHY_ADDR, \
-	.flags = TSEC##num##_FLAGS \
+	.flags = TSEC##num##_FLAGS, \
+	.mii_devname = DEFAULT_MII_NAME \
 }
 
 #define SET_STD_TSEC_INFO(x, num) \
 {			\
 	x.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)); \
-	x.miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR); \
-	x.miiregs_sgmii = (tsec_mdio_t *)(MDIO_BASE_ADDR \
+	x.miiregs_sgmii = (struct tsec_mii_mng *)(CONFIG_SYS_MDIO_BASE_ADDR \
 					  + (num - 1) * TSEC_MDIO_OFFSET); \
 	x.devname = CONFIG_TSEC##num##_NAME; \
 	x.phyaddr = TSEC##num##_PHY_ADDR; \
 	x.flags = TSEC##num##_FLAGS;\
+	x.mii_devname = DEFAULT_MII_NAME;\
 }
 
 #define MAC_ADDR_LEN 6
@@ -51,8 +57,6 @@
 #define TSEC_TIMEOUT 1000
 #define TOUT_LOOP	1000000
 
-#define PHY_AUTONEGOTIATE_TIMEOUT	5000 /* in ms */
-
 /* TBI register addresses */
 #define TBI_CR			0x00
 #define TBI_SR			0x01
@@ -96,204 +100,14 @@
 
 #define ECNTRL_INIT_SETTINGS	0x00001000
 #define ECNTRL_TBI_MODE		0x00000020
+#define ECNTRL_REDUCED_MODE	0x00000010
 #define ECNTRL_R100		0x00000008
+#define ECNTRL_REDUCED_MII_MODE	0x00000004
 #define ECNTRL_SGMII_MODE	0x00000002
 
-#define miim_end -2
-#define miim_read -1
-
 #ifndef CONFIG_SYS_TBIPA_VALUE
     #define CONFIG_SYS_TBIPA_VALUE	0x1f
 #endif
-#define MIIMCFG_INIT_VALUE	0x00000003
-#define MIIMCFG_RESET		0x80000000
-
-#define MIIMIND_BUSY		0x00000001
-#define MIIMIND_NOTVALID	0x00000004
-
-#define MIIM_CONTROL		0x00
-#define MIIM_CONTROL_RESET	0x00009140
-#define MIIM_CONTROL_INIT	0x00001140
-#define MIIM_CONTROL_RESTART	0x00001340
-#define MIIM_ANEN		0x00001000
-
-#define MIIM_CR			0x00
-#define MIIM_CR_RST		0x00008000
-#define MIIM_CR_INIT		0x00001000
-
-#define MIIM_STATUS		0x1
-#define MIIM_STATUS_AN_DONE	0x00000020
-#define MIIM_STATUS_LINK	0x0004
-
-#define MIIM_PHYIR1		0x2
-#define MIIM_PHYIR2		0x3
-
-#define MIIM_ANAR		0x4
-#define MIIM_ANAR_INIT		0x1e1
-
-#define MIIM_TBI_ANLPBPA	0x5
-#define MIIM_TBI_ANLPBPA_HALF	0x00000040
-#define MIIM_TBI_ANLPBPA_FULL	0x00000020
-
-#define MIIM_TBI_ANEX		0x6
-#define MIIM_TBI_ANEX_NP	0x00000004
-#define MIIM_TBI_ANEX_PRX	0x00000002
-
-#define MIIM_GBIT_CONTROL	0x9
-#define MIIM_GBIT_CONTROL_INIT	0xe00
-
-#define MIIM_EXT_PAGE_ACCESS	0x1f
-
-/* Broadcom BCM54xx -- taken from linux sungem_phy */
-#define MIIM_BCM54xx_AUXCNTL			0x18
-#define MIIM_BCM54xx_AUXCNTL_ENCODE(val)	((val & 0x7) << 12)|(val & 0x7)
-#define MIIM_BCM54xx_AUXSTATUS			0x19
-#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK	0x0700
-#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT	8
-
-#define MIIM_BCM54XX_SHD	0x1c	/* 0x1c shadow registers */
-#define MIIM_BCM54XX_SHD_WRITE	0x8000
-#define MIIM_BCM54XX_SHD_VAL(x)	((x & 0x1f) << 10)
-#define MIIM_BCM54XX_SHD_DATA(x)	((x & 0x3ff) << 0)
-#define MIIM_BCM54XX_SHD_WR_ENCODE(val, data)	\
-	(MIIM_BCM54XX_SHD_WRITE | MIIM_BCM54XX_SHD_VAL(val) | \
-	 MIIM_BCM54XX_SHD_DATA(data))
-
-#define MIIM_BCM54XX_EXP_DATA	0x15	/* Expansion register data */
-#define MIIM_BCM54XX_EXP_SEL	0x17	/* Expansion register select */
-#define MIIM_BCM54XX_EXP_SEL_SSD	0x0e00	/* Secondary SerDes select */
-#define MIIM_BCM54XX_EXP_SEL_ER	0x0f00	/* Expansion register select */
-
-/* Cicada Auxiliary Control/Status Register */
-#define MIIM_CIS8201_AUX_CONSTAT	0x1c
-#define MIIM_CIS8201_AUXCONSTAT_INIT	0x0004
-#define MIIM_CIS8201_AUXCONSTAT_DUPLEX	0x0020
-#define MIIM_CIS8201_AUXCONSTAT_SPEED	0x0018
-#define MIIM_CIS8201_AUXCONSTAT_GBIT	0x0010
-#define MIIM_CIS8201_AUXCONSTAT_100	0x0008
-
-/* Cicada Extended Control Register 1 */
-#define MIIM_CIS8201_EXT_CON1		0x17
-#define MIIM_CIS8201_EXTCON1_INIT	0x0000
-
-/* Cicada 8204 Extended PHY Control Register 1 */
-#define MIIM_CIS8204_EPHY_CON		0x17
-#define MIIM_CIS8204_EPHYCON_INIT	0x0006
-#define MIIM_CIS8204_EPHYCON_RGMII	0x1100
-
-/* Cicada 8204 Serial LED Control Register */
-#define MIIM_CIS8204_SLED_CON		0x1b
-#define MIIM_CIS8204_SLEDCON_INIT	0x1115
-
-#define MIIM_GBIT_CON		0x09
-#define MIIM_GBIT_CON_ADVERT	0x0e00
-
-/* Entry for Vitesse VSC8244 regs starts here */
-/* Vitesse VSC8244 Auxiliary Control/Status Register */
-#define MIIM_VSC8244_AUX_CONSTAT	0x1c
-#define MIIM_VSC8244_AUXCONSTAT_INIT	0x0000
-#define MIIM_VSC8244_AUXCONSTAT_DUPLEX	0x0020
-#define MIIM_VSC8244_AUXCONSTAT_SPEED	0x0018
-#define MIIM_VSC8244_AUXCONSTAT_GBIT	0x0010
-#define MIIM_VSC8244_AUXCONSTAT_100	0x0008
-#define MIIM_CONTROL_INIT_LOOPBACK	0x4000
-
-/* Vitesse VSC8244 Extended PHY Control Register 1 */
-#define MIIM_VSC8244_EPHY_CON		0x17
-#define MIIM_VSC8244_EPHYCON_INIT	0x0006
-
-/* Vitesse VSC8244 Serial LED Control Register */
-#define MIIM_VSC8244_LED_CON		0x1b
-#define MIIM_VSC8244_LEDCON_INIT	0xF011
-
-/* Entry for Vitesse VSC8601 regs starts here (Not complete) */
-/* Vitesse VSC8601 Extended PHY Control Register 1 */
-#define MIIM_VSC8601_EPHY_CON		0x17
-#define MIIM_VSC8601_EPHY_CON_INIT_SKEW	0x1120
-#define MIIM_VSC8601_SKEW_CTRL		0x1c
-
-/* 88E1011 PHY Status Register */
-#define MIIM_88E1011_PHY_STATUS		0x11
-#define MIIM_88E1011_PHYSTAT_SPEED	0xc000
-#define MIIM_88E1011_PHYSTAT_GBIT	0x8000
-#define MIIM_88E1011_PHYSTAT_100	0x4000
-#define MIIM_88E1011_PHYSTAT_DUPLEX	0x2000
-#define MIIM_88E1011_PHYSTAT_SPDDONE	0x0800
-#define MIIM_88E1011_PHYSTAT_LINK	0x0400
-
-#define MIIM_88E1011_PHY_SCR		0x10
-#define MIIM_88E1011_PHY_MDI_X_AUTO	0x0060
-
-/* 88E1111 PHY LED Control Register */
-#define MIIM_88E1111_PHY_LED_CONTROL	24
-#define MIIM_88E1111_PHY_LED_DIRECT	0x4100
-#define MIIM_88E1111_PHY_LED_COMBINE	0x411C
-
-/* 88E1121 PHY LED Control Register */
-#define MIIM_88E1121_PHY_LED_CTRL	16
-#define MIIM_88E1121_PHY_LED_PAGE	3
-#define MIIM_88E1121_PHY_LED_DEF	0x0030
-
-/* 88E1121 PHY IRQ Enable/Status Register */
-#define MIIM_88E1121_PHY_IRQ_EN		18
-#define MIIM_88E1121_PHY_IRQ_STATUS	19
-
-#define MIIM_88E1121_PHY_PAGE		22
-
-/* 88E1145 Extended PHY Specific Control Register */
-#define MIIM_88E1145_PHY_EXT_CR 20
-#define MIIM_M88E1145_RGMII_RX_DELAY	0x0080
-#define MIIM_M88E1145_RGMII_TX_DELAY	0x0002
-
-#define MIIM_88E1145_PHY_PAGE	29
-#define MIIM_88E1145_PHY_CAL_OV 30
-
-/* RTL8211B PHY Status Register */
-#define MIIM_RTL8211B_PHY_STATUS	0x11
-#define MIIM_RTL8211B_PHYSTAT_SPEED	0xc000
-#define MIIM_RTL8211B_PHYSTAT_GBIT	0x8000
-#define MIIM_RTL8211B_PHYSTAT_100	0x4000
-#define MIIM_RTL8211B_PHYSTAT_DUPLEX	0x2000
-#define MIIM_RTL8211B_PHYSTAT_SPDDONE	0x0800
-#define MIIM_RTL8211B_PHYSTAT_LINK	0x0400
-
-/* DM9161 Control register values */
-#define MIIM_DM9161_CR_STOP	0x0400
-#define MIIM_DM9161_CR_RSTAN	0x1200
-
-#define MIIM_DM9161_SCR		0x10
-#define MIIM_DM9161_SCR_INIT	0x0610
-
-/* DM9161 Specified Configuration and Status Register */
-#define MIIM_DM9161_SCSR	0x11
-#define MIIM_DM9161_SCSR_100F	0x8000
-#define MIIM_DM9161_SCSR_100H	0x4000
-#define MIIM_DM9161_SCSR_10F	0x2000
-#define MIIM_DM9161_SCSR_10H	0x1000
-
-/* DM9161 10BT Configuration/Status */
-#define MIIM_DM9161_10BTCSR	0x12
-#define MIIM_DM9161_10BTCSR_INIT	0x7800
-
-/* LXT971 Status 2 registers */
-#define MIIM_LXT971_SR2		     0x11  /* Status Register 2  */
-#define MIIM_LXT971_SR2_SPEED_MASK 0x4200
-#define MIIM_LXT971_SR2_10HDX	   0x0000  /*  10 Mbit half duplex selected */
-#define MIIM_LXT971_SR2_10FDX	   0x0200  /*  10 Mbit full duplex selected */
-#define MIIM_LXT971_SR2_100HDX	   0x4000  /* 100 Mbit half duplex selected */
-#define MIIM_LXT971_SR2_100FDX	   0x4200  /* 100 Mbit full duplex selected */
-
-/* DP83865 Control register values */
-#define MIIM_DP83865_CR_INIT	0x9200
-
-/* DP83865 Link and Auto-Neg Status Register */
-#define MIIM_DP83865_LANR	0x11
-#define MIIM_DP83865_SPD_MASK	0x0018
-#define MIIM_DP83865_SPD_1000	0x0010
-#define MIIM_DP83865_SPD_100	0x0008
-#define MIIM_DP83865_DPX_FULL	0x0002
-
-#define MIIM_READ_COMMAND	0x00000001
 
 #define MRBLR_INIT_SETTINGS	PKTSIZE_ALIGN
 
@@ -467,22 +281,6 @@ typedef struct tsec_hash_regs
 	uint	res2[24];
 } tsec_hash_t;
 
-typedef struct tsec_mdio {
-	uint	res1[4];
-	uint	ieventm;
-	uint	imaskm;
-	uint	res2;
-	uint	emapm;
-	uint	res3[320];
-	uint	miimcfg;	/* MII Management: Configuration */
-	uint	miimcom;	/* MII Management: Command */
-	uint	miimadd;	/* MII Management: Address */
-	uint	miimcon;	/* MII Management: Control */
-	uint	miimstat;	/* MII Management: Status */
-	uint	miimind;	/* MII Management: Indicators */
-	uint	res4[690];
-} tsec_mdio_t;
-
 typedef struct tsec
 {
 	/* General Control and Status Registers (0x2_n000) */
@@ -578,79 +376,29 @@ typedef struct tsec
 	uint	resc00[256];
 } tsec_t;
 
-#define TSEC_GIGABIT (1)
+#define TSEC_GIGABIT (1 << 0)
 
-/* This flag currently only has
- * meaning if we're using the eTSEC */
+/* These flags currently only have meaning if we're using the eTSEC */
 #define TSEC_REDUCED	(1 << 1)	/* MAC-PHY interface uses RGMII */
 #define TSEC_SGMII	(1 << 2)	/* MAC-PHY interface uses SGMII */
-#define TSEC_FIBER	(1 << 3)	/* PHY uses fiber, eg 1000 Base-X */
 
 struct tsec_private {
-	volatile tsec_t *regs;
-	volatile tsec_mdio_t *phyregs;
-	volatile tsec_mdio_t *phyregs_sgmii;
-	struct phy_info *phyinfo;
+	tsec_t *regs;
+	struct tsec_mii_mng *phyregs_sgmii;
+	struct phy_device *phydev;
+	phy_interface_t interface;
+	struct mii_dev *bus;
 	uint phyaddr;
+	char mii_devname[16];
 	u32 flags;
-	uint link;
-	uint duplexity;
-	uint speed;
-};
-
-
-/*
- * struct phy_cmd:  A command for reading or writing a PHY register
- *
- * mii_reg:  The register to read or write
- *
- * mii_data:  For writes, the value to put in the register.
- *	A value of -1 indicates this is a read.
- *
- * funct: A function pointer which is invoked for each command.
- *	For reads, this function will be passed the value read
- *	from the PHY, and process it.
- *	For writes, the result of this function will be written
- *	to the PHY register
- */
-struct phy_cmd {
-	uint mii_reg;
-	uint mii_data;
-	uint (*funct) (uint mii_reg, struct tsec_private * priv);
-};
-
-/* struct phy_info: a structure which defines attributes for a PHY
- *
- * id will contain a number which represents the PHY.  During
- * startup, the driver will poll the PHY to find out what its
- * UID--as defined by registers 2 and 3--is.  The 32-bit result
- * gotten from the PHY will be shifted right by "shift" bits to
- * discard any bits which may change based on revision numbers
- * unimportant to functionality
- *
- * The struct phy_cmd entries represent pointers to an arrays of
- * commands which tell the driver what to do to the PHY.
- */
-struct phy_info {
-	uint id;
-	char *name;
-	uint shift;
-	/* Called to configure the PHY, and modify the controller
-	 * based on the results */
-	struct phy_cmd *config;
-
-	/* Called when starting up the controller */
-	struct phy_cmd *startup;
-
-	/* Called when bringing down the controller */
-	struct phy_cmd *shutdown;
 };
 
 struct tsec_info_struct {
 	tsec_t *regs;
-	tsec_mdio_t *miiregs;
-	tsec_mdio_t *miiregs_sgmii;
+	struct tsec_mii_mng *miiregs_sgmii;
 	char *devname;
+	char *mii_devname;
+	phy_interface_t interface;
 	unsigned int phyaddr;
 	u32 flags;
 };