Merge git://git.denx.de/u-boot-x86

9 files changed, 90 insertions, 55 deletions

diff --git a/include/configs/bayleybay.h b/include/configs/bayleybay.h
index d37a865..1ba2998 100644
--- a/include/configs/bayleybay.h
+++ b/include/configs/bayleybay.h
@@ -16,7 +16,6 @@
 #define CONFIG_SYS_MONITOR_LEN		(1 << 20)
 #define CONFIG_ARCH_MISC_INIT
 
-#define CONFIG_PCI_CONFIG_HOST_BRIDGE
 #define CONFIG_SYS_EARLY_PCI_INIT
 #define CONFIG_PCI_PNP
 
diff --git a/include/configs/crownbay.h b/include/configs/crownbay.h
index 57a9512..998da78 100644
--- a/include/configs/crownbay.h
+++ b/include/configs/crownbay.h
@@ -31,7 +31,6 @@
 #define CONFIG_PCI_IO_PHYS		CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE		0xe000
 
-#define CONFIG_PCI_CONFIG_HOST_BRIDGE
 #define CONFIG_SYS_EARLY_PCI_INIT
 #define CONFIG_PCI_PNP
 
@@ -54,9 +53,6 @@
 #define CONFIG_PCH_GBE
 #define CONFIG_PHYLIB
 
-/* TunnelCreek IGD support */
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-
 /* Environment configuration */
 #define CONFIG_ENV_SECT_SIZE		0x1000
 #define CONFIG_ENV_OFFSET		0
diff --git a/include/configs/minnowmax.h b/include/configs/minnowmax.h
index aeb04b9..53d86a2 100644
--- a/include/configs/minnowmax.h
+++ b/include/configs/minnowmax.h
@@ -19,7 +19,6 @@
 
 #define CONFIG_SMSC_LPC47M
 
-#define CONFIG_PCI_CONFIG_HOST_BRIDGE
 #define CONFIG_SYS_EARLY_PCI_INIT
 #define CONFIG_PCI_PNP
 #define CONFIG_RTL8169
diff --git a/include/configs/qemu-x86.h b/include/configs/qemu-x86.h
index 72df64e..1b544c1 100644
--- a/include/configs/qemu-x86.h
+++ b/include/configs/qemu-x86.h
@@ -28,7 +28,6 @@
 #define CONFIG_PCI_IO_PHYS		CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE		0xe000
 
-#define CONFIG_PCI_CONFIG_HOST_BRIDGE
 #define CONFIG_PCI_PNP
 
 #define CONFIG_STD_DEVICES_SETTINGS	"stdin=serial,vga\0" \
diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h
index 349b06c..217312e 100644
--- a/include/configs/x86-common.h
+++ b/include/configs/x86-common.h
@@ -87,7 +87,9 @@
 #define CONFIG_ISO_PARTITION		/* Experimental */
 
 #define CONFIG_CMD_PART
+#ifdef CONFIG_SYS_COREBOOT
 #define CONFIG_CMD_CBFS
+#endif
 #define CONFIG_CMD_EXT4
 #define CONFIG_CMD_EXT4_WRITE
 #define CONFIG_PARTITION_UUIDS
@@ -190,6 +192,7 @@
  * PCI configuration
  */
 #define CONFIG_PCI
+#define CONFIG_PCI_CONFIG_HOST_BRIDGE
 
 /*-----------------------------------------------------------------------
  * USB configuration
diff --git a/include/i8042.h b/include/i8042.h
index 58c85ec..e0afce1 100644
--- a/include/i8042.h
+++ b/include/i8042.h
@@ -10,52 +10,67 @@
 #ifndef _I8042_H_
 #define _I8042_H_
 
-#ifdef __I386__
-#include <common.h>
-#include <asm/io.h>
-#define in8(p) inb(p)
-#define out8(p,v) outb(v,p)
-#endif
-
 /* defines */
 
-#define I8042_DATA_REG      (CONFIG_SYS_ISA_IO + 0x0060)    /* keyboard i/o buffer */
-#define I8042_STATUS_REG    (CONFIG_SYS_ISA_IO + 0x0064)    /* keyboard status read */
-#define I8042_COMMAND_REG   (CONFIG_SYS_ISA_IO + 0x0064)    /* keyboard ctrl write */
-
-enum {
-	/* Output register (I8042_DATA_REG) has data for system */
-	I8042_STATUS_OUT_DATA	= 1 << 0,
-	I8042_STATUS_IN_DATA	= 1 << 1,
-};
-
-#define KBD_US              0        /* default US layout */
-#define KBD_GER             1        /* german layout */
-
-#define KBD_TIMEOUT         1000     /* 1 sec */
-#define KBD_RESET_TRIES     3
-
-#define AS                  0        /* normal character index */
-#define SH                  1        /* shift index */
-#define CN                  2        /* control index */
-#define NM                  3        /* numeric lock index */
-#define AK                  4        /* right alt key */
-#define CP                  5        /* capslock index */
-#define ST                  6        /* stop output index */
-#define EX                  7        /* extended code index */
-#define ES                  8        /* escape and extended code index */
-
-#define NORMAL              0x0000    /* normal key */
-#define STP                 0x0001    /* scroll lock stop output*/
-#define NUM                 0x0002    /* numeric lock */
-#define CAPS                0x0004    /* capslock */
-#define SHIFT               0x0008    /* shift */
-#define CTRL                0x0010    /* control*/
-#define EXT                 0x0020    /* extended scan code 0xe0 */
-#define ESC                 0x0040    /* escape key press */
-#define E1                  0x0080    /* extended scan code 0xe1 */
-#define BRK                 0x0100    /* make break flag for keyboard */
-#define ALT                 0x0200    /* right alt */
+#define I8042_DATA_REG	0x60	/* keyboard i/o buffer */
+#define I8042_STS_REG	0x64	/* keyboard status read */
+#define I8042_CMD_REG	0x64	/* keyboard ctrl write */
+
+/* Status register bit defines */
+#define STATUS_OBF	(1 << 0)
+#define STATUS_IBF	(1 << 1)
+
+/* Configuration byte bit defines */
+#define CONFIG_KIRQ_EN	(1 << 0)
+#define CONFIG_MIRQ_EN	(1 << 1)
+#define CONFIG_SET_BIST	(1 << 2)
+#define CONFIG_KCLK_DIS	(1 << 4)
+#define CONFIG_MCLK_DIS	(1 << 5)
+#define CONFIG_AT_TRANS	(1 << 6)
+
+/* i8042 commands */
+#define CMD_RD_CONFIG	0x20	/* read configuration byte */
+#define CMD_WR_CONFIG	0x60	/* write configuration byte */
+#define CMD_SELF_TEST	0xaa	/* controller self-test */
+#define CMD_KBD_DIS	0xad	/* keyboard disable */
+#define CMD_KBD_EN	0xae	/* keyboard enable */
+#define CMD_SET_KBD_LED	0xed	/* set keyboard led */
+#define CMD_RESET_KBD	0xff	/* reset keyboard */
+
+/* i8042 command result */
+#define KBC_TEST_OK	0x55
+#define KBD_ACK		0xfa
+#define KBD_POR		0xaa
+
+/* keyboard scan codes */
+
+#define KBD_US		0	/* default US layout */
+#define KBD_GER		1	/* german layout */
+
+#define KBD_TIMEOUT	1000	/* 1 sec */
+#define KBD_RESET_TRIES	3
+
+#define AS		0	/* normal character index */
+#define SH		1	/* shift index */
+#define CN		2	/* control index */
+#define NM		3	/* numeric lock index */
+#define AK		4	/* right alt key */
+#define CP		5	/* capslock index */
+#define ST		6	/* stop output index */
+#define EX		7	/* extended code index */
+#define ES		8	/* escape and extended code index */
+
+#define NORMAL		0x0000	/* normal key */
+#define STP		0x0001	/* scroll lock stop output*/
+#define NUM		0x0002	/* numeric lock */
+#define CAPS		0x0004	/* capslock */
+#define SHIFT		0x0008	/* shift */
+#define CTRL		0x0010	/* control*/
+#define EXT		0x0020	/* extended scan code 0xe0 */
+#define ESC		0x0040	/* escape key press */
+#define E1		0x0080	/* extended scan code 0xe1 */
+#define BRK		0x0100	/* make break flag for keyboard */
+#define ALT		0x0200	/* right alt */
 
 /* exports */
 
diff --git a/include/pci.h b/include/pci.h
index 488ff44..e24c970 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -653,6 +653,7 @@ extern pci_addr_t pci_hose_phys_to_bus(struct pci_controller* hose,
 #define pci_io_to_virt(dev, addr, len, map_flags) \
 	pci_bus_to_virt((dev), (addr), PCI_REGION_IO, (len), (map_flags))
 
+/* For driver model these are defined in macros in pci_compat.c */
 extern int pci_hose_read_config_byte(struct pci_controller *hose,
 				     pci_dev_t dev, int where, u8 *val);
 extern int pci_hose_read_config_word(struct pci_controller *hose,
diff --git a/include/smsc_lpc47m.h b/include/smsc_lpc47m.h
index 32b069d..419643f 100644
--- a/include/smsc_lpc47m.h
+++ b/include/smsc_lpc47m.h
@@ -7,14 +7,35 @@
 #ifndef _SMSC_LPC47M_H_
 #define _SMSC_LPC47M_H_
 
+/* I/O address of LPC47M */
+#define LPC47M_IO_PORT	0x2e
+
+/* Logical device number */
+#define LPC47M_FDC	0	/* Floppy */
+#define LPC47M_SP2	2	/* Serial Port 2 */
+#define LPC47M_PP	3	/* Parallel Port */
+#define LPC47M_SP1	4	/* Serial Port 1 */
+#define LPC47M_KBC	7	/* Keyboard & Mouse */
+#define LPC47M_PME	10	/* Power Control */
+
 /**
  * Configure the base I/O port of the specified serial device and enable the
  * serial device.
  *
- * @dev: High 8 bits = Super I/O port, low 8 bits = logical device number.
- * @iobase: Processor I/O port address to assign to this serial device.
- * @irq: Processor IRQ number to assign to this serial device.
+ * @dev: high 8 bits = super I/O port, low 8 bits = logical device number
+ * @iobase: processor I/O port address to assign to this serial device
+ * @irq: processor IRQ number to assign to this serial device
+ */
+void lpc47m_enable_serial(uint dev, uint iobase, uint irq);
+
+/**
+ * Configure the specified keyboard controller device and enable the keyboard
+ * controller device.
+ *
+ * @dev: high 8 bits = Super I/O port, low 8 bits = logical device number
+ * @irq0: processor IRQ number to assign to keyboard
+ * @irq1: processor IRQ number to assign to mouse
  */
-void lpc47m_enable_serial(u16 dev, u16 iobase, u8 irq);
+void lpc47m_enable_kbc(uint dev, uint irq0, uint irq1);
 
 #endif /* _SMSC_LPC47M_H_ */
diff --git a/include/vbe.h b/include/vbe.h
index 1a86db8..164ccae 100644
--- a/include/vbe.h
+++ b/include/vbe.h
@@ -102,6 +102,8 @@ struct vbe_ddc_info {
 #define VESA_SET_MODE		0x4f02
 #define VESA_GET_CUR_MODE	0x4f03
 
+extern struct vbe_mode_info mode_info;
+
 struct graphic_device;
 int vbe_get_video_info(struct graphic_device *gdev);