Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

17 files changed, 475 insertions, 2 deletions

diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h
new file mode 100644
index 0000000..eb91c44
--- /dev/null
+++ b/include/configs/embestmx6boards.h
@@ -0,0 +1,336 @@
+/*
+ * Copyright (C) 2014 Eukréa Electromatique
+ * Author: Eric Bénard <eric@eukrea.com>
+ *
+ * Configuration settings for the Embest RIoTboard
+ *
+ * based on mx6*sabre*.h which are :
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __RIOTBOARD_CONFIG_H
+#define __RIOTBOARD_CONFIG_H
+
+#include <asm/arch/imx-regs.h>
+#include <asm/imx-common/gpio.h>
+
+#include "mx6_common.h"
+#include <linux/sizes.h>
+
+#define CONFIG_MXC_UART_BASE		UART2_BASE
+#define CONFIG_CONSOLE_DEV		"ttymxc0"
+#define CONFIG_MMCROOT			"/dev/mmcblk1p2"
+
+#define PHYS_SDRAM_SIZE		(1u * 1024 * 1024 * 1024)
+
+#define CONFIG_MX6
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_MXC_GPIO
+
+#define CONFIG_MXC_UART
+
+#define CONFIG_CMD_FUSE
+#ifdef CONFIG_CMD_FUSE
+#define CONFIG_MXC_OCOTP
+#endif
+
+/* I2C Configs */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_SPEED		100000
+
+/* USB Configs */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
+#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS	0
+
+/* MMC Configs */
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR      0
+
+#define CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE			ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE		RGMII
+#define CONFIG_ETHPRIME			"FEC"
+#define CONFIG_FEC_MXC_PHYADDR		4
+
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ATHEROS
+
+#define CONFIG_CMD_SF
+#ifdef CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SST
+#define CONFIG_MXC_SPI
+#define CONFIG_SF_DEFAULT_BUS		0
+#define CONFIG_SF_DEFAULT_CS		(0 | (IMX_GPIO_NR(2, 30) << 8))
+#define CONFIG_SF_DEFAULT_SPEED		20000000
+#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
+#endif
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX              1
+#define CONFIG_BAUDRATE                        115200
+
+/* Command definition */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BMODE
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_SETEXPR
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_BOOTDELAY               1
+
+#define CONFIG_LOADADDR                        0x12000000
+#define CONFIG_SYS_TEXT_BASE           0x17800000
+
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+#define EMMC_ENV \
+	"emmcdev=2\0" \
+	"update_emmc_firmware=" \
+		"if test ${ip_dyn} = yes; then " \
+			"setenv get_cmd dhcp; " \
+		"else " \
+			"setenv get_cmd tftp; " \
+		"fi; " \
+		"if ${get_cmd} ${update_sd_firmware_filename}; then " \
+			"if mmc dev ${emmcdev}; then "	\
+				"setexpr fw_sz ${filesize} / 0x200; " \
+				"setexpr fw_sz ${fw_sz} + 1; "	\
+				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
+			"fi; "	\
+		"fi\0"
+#else
+#define EMMC_ENV ""
+#endif
+
+#ifdef CONFIG_CMD_SF
+#define SF_ENV \
+	"update_spi_firmware=" \
+		"if test ${ip_dyn} = yes; then " \
+			"setenv get_cmd dhcp; " \
+		"else " \
+			"setenv get_cmd tftp; " \
+		"fi; " \
+		"if ${get_cmd} ${update_spi_firmware_filename}; then " \
+			"if sf probe; then "	\
+				"sf erase 0 0xc0000; " \
+				"sf write ${loadaddr} 0x400 ${filesize}; " \
+			"fi; "	\
+		"fi\0"
+#else
+#define SF_ENV ""
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"script=boot.scr\0" \
+	"image=zImage\0" \
+	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
+	"fdt_addr=0x18000000\0" \
+	"boot_fdt=try\0" \
+	"ip_dyn=yes\0" \
+	"console=" CONFIG_CONSOLE_DEV "\0" \
+	"fdt_high=0xffffffff\0"	  \
+	"initrd_high=0xffffffff\0" \
+	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
+	"mmcpart=1\0" \
+	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+	"update_sd_firmware=" \
+		"if test ${ip_dyn} = yes; then " \
+			"setenv get_cmd dhcp; " \
+		"else " \
+			"setenv get_cmd tftp; " \
+		"fi; " \
+		"if mmc dev ${mmcdev}; then "	\
+			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
+				"setexpr fw_sz ${filesize} / 0x200; " \
+				"setexpr fw_sz ${fw_sz} + 1; "	\
+				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
+			"fi; "	\
+		"fi\0" \
+	EMMC_ENV	  \
+	SF_ENV	  \
+	"mmcargs=setenv bootargs console=${console},${baudrate} " \
+		"root=${mmcroot}\0" \
+	"loadbootscript=" \
+		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+	"bootscript=echo Running bootscript from mmc ...; " \
+		"source\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if run loadfdt; then " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootz; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootz; " \
+		"fi;\0" \
+	"netargs=setenv bootargs console=${console},${baudrate} " \
+		"root=/dev/nfs " \
+		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+	"netboot=echo Booting from net ...; " \
+		"run netargs; " \
+		"if test ${ip_dyn} = yes; then " \
+			"setenv get_cmd dhcp; " \
+		"else " \
+			"setenv get_cmd tftp; " \
+		"fi; " \
+		"${get_cmd} ${image}; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootz; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootz; " \
+		"fi;\0"
+
+#define CONFIG_BOOTCOMMAND \
+	"mmc dev ${mmcdev};" \
+	"if mmc rescan; then " \
+		"if run loadbootscript; then " \
+		"run bootscript; " \
+		"else " \
+			"if run loadimage; then " \
+				"run mmcboot; " \
+			"else run netboot; " \
+			"fi; " \
+		"fi; " \
+	"else run netboot; fi"
+
+#define CONFIG_ARP_TIMEOUT     200UL
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE              256
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS             16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_MEMTEST_START       0x10000000
+#define CONFIG_SYS_MEMTEST_END         0x10010000
+#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
+
+#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
+
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_STACKSIZE               (128 * 1024)
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS           1
+#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ENV_SIZE			(8 * 1024)
+
+#if defined(CONFIG_ENV_IS_IN_MMC)
+/* RiOTboard */
+#define CONFIG_DEFAULT_FDT_FILE	"imx6s-riotboard.dtb"
+#define CONFIG_SYS_FSL_USDHC_NUM	3
+#define CONFIG_SYS_MMC_ENV_DEV		2	/* SDHC4 */
+#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
+#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
+#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
+/* MarSBoard */
+#define CONFIG_DEFAULT_FDT_FILE	"imx6q-marsboard.dtb"
+#define CONFIG_SYS_FSL_USDHC_NUM	2
+#define CONFIG_ENV_OFFSET		(768 * 1024)
+#define CONFIG_ENV_SECT_SIZE		(8 * 1024)
+#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
+#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
+#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
+#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
+#endif
+
+#define CONFIG_OF_LIBFDT
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+#define CONFIG_CMD_CACHE
+#endif
+
+/* Framebuffer */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_IPUV3_CLK 260000000
+#define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
+
+#endif                         /* __RIOTBOARD_CONFIG_H */
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index 3398390..cd55495 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -24,6 +24,8 @@
 #define CONFIG_SERIAL_TAG
 #define CONFIG_REVISION_TAG
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
 
@@ -136,6 +138,8 @@
 #define CONFIG_POWER_I2C
 #define CONFIG_POWER_PFUZE100
 #define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
+#define CONFIG_POWER_LTC3676
+#define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 
 /* Various command support */
 #include <config_cmd_default.h>
@@ -190,6 +194,22 @@
 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 #define CONFIG_USB_HUB_MIN_POWER_ON_DELAY 1200
 
+/* Framebuffer and LCD */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_IPUV3_CLK          260000000
+#define CONFIG_CMD_HDMIDETECT
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
+
 /* serial console (ttymxc1,115200) */
 #define CONFIG_CONS_INDEX              1
 #define CONFIG_BAUDRATE                115200
diff --git a/include/configs/hummingboard.h b/include/configs/hummingboard.h
index 2895523..34dbdce 100644
--- a/include/configs/hummingboard.h
+++ b/include/configs/hummingboard.h
@@ -27,6 +27,8 @@
 #define CONFIG_INITRD_TAG
 #define CONFIG_REVISION_TAG
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(2 * SZ_1M)
 
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index bb1fa44..3e387c4 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -7,7 +7,6 @@
 #ifndef __CONFIGS_M28EVK_H__
 #define __CONFIGS_M28EVK_H__
 
-
 /* System configurations */
 #define CONFIG_MX28				/* i.MX28 SoC */
 #define MACH_TYPE_M28EVK	3613
diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
index 797a637..134d680 100644
--- a/include/configs/mx53ard.h
+++ b/include/configs/mx53ard.h
@@ -23,6 +23,8 @@
 #define CONFIG_INITRD_TAG
 #define CONFIG_REVISION_TAG
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index 3f0d80a..5bbae8c 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -23,6 +23,8 @@
 #define CONFIG_INITRD_TAG
 #define CONFIG_REVISION_TAG
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 #define CONFIG_OF_LIBFDT
 
 /* Size of malloc() pool */
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 5859f36..12d79b4 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -22,6 +22,8 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
 
diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h
index a04e7c7..3da0ef4 100644
--- a/include/configs/mx53smd.h
+++ b/include/configs/mx53smd.h
@@ -23,6 +23,8 @@
 #define CONFIG_INITRD_TAG
 #define CONFIG_REVISION_TAG
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index 7a2c172..e59a3b4 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -25,6 +25,8 @@
 #define CONFIG_INITRD_TAG
 #define CONFIG_REVISION_TAG
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)
 
diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index 5d02d23..0fa6573 100644
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -47,6 +47,7 @@
 #define CONFIG_VIDEO_BMP_LOGO
 #define CONFIG_IPUV3_CLK 260000000
 #define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
 
 #define CONFIG_CMD_PCI
 #ifdef CONFIG_CMD_PCI
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index 1876dbf..3d05a64 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -10,6 +10,7 @@
 #define __CONFIG_H
 
 #include <asm/arch/imx-regs.h>
+#include <asm/imx-common/gpio.h>
 #include <linux/sizes.h>
 #include "mx6_common.h"
 
@@ -196,4 +197,15 @@
 #define CONFIG_CMD_CACHE
 #endif
 
+#define CONFIG_CMD_SF
+#ifdef CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_MXC_SPI
+#define CONFIG_SF_DEFAULT_BUS		0
+#define CONFIG_SF_DEFAULT_CS		(0 | (IMX_GPIO_NR(4, 11) << 8))
+#define CONFIG_SF_DEFAULT_SPEED		20000000
+#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
+#endif
+
 #endif				/* __CONFIG_H */
diff --git a/include/configs/mxs.h b/include/configs/mxs.h
index ba55177..8bce28f 100644
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -40,6 +40,7 @@
 /*
  * CPU specifics
  */
+#define CONFIG_SYS_GENERIC_BOARD
 
 /* MXS uses FDT */
 #define CONFIG_OF_LIBFDT
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index f7e7315..b2b17ce 100644
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -24,6 +24,7 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_REVISION_TAG
+#define CONFIG_SYS_GENERIC_BOARD
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
@@ -141,6 +142,7 @@
 #define CONFIG_CMD_HDMIDETECT
 #define CONFIG_CONSOLE_MUX
 #define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/udoo.h b/include/configs/udoo.h
index a0306de..700e9c1 100644
--- a/include/configs/udoo.h
+++ b/include/configs/udoo.h
@@ -26,6 +26,8 @@
 #define CONFIG_INITRD_TAG
 #define CONFIG_REVISION_TAG
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(2 * SZ_1M)
 
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 6c74c72..7d96908 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -26,6 +26,8 @@
 #define CONFIG_INITRD_TAG
 #define CONFIG_REVISION_TAG
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)
 
@@ -56,6 +58,12 @@
 #define CONFIG_LOADADDR			0x12000000
 #define CONFIG_SYS_TEXT_BASE		0x17800000
 
+/* I2C Configs */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_SPEED		100000
+
 /* MMC Configuration */
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_USDHC
@@ -98,7 +106,9 @@
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
 #define CONFIG_IPUV3_CLK 260000000
+#define CONFIG_CMD_HDMIDETECT
 #define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
 
 #if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
 #define CONFIG_DEFAULT_FDT_FILE		"imx6dl-wandboard.dtb"
@@ -135,7 +145,33 @@
 			"fi; "	\
 		"fi\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"root=${mmcroot}\0" \
+		"root=${mmcroot}; run videoargs\0" \
+	"videoargs=" \
+		"setenv nextcon 0; " \
+		"if hdmidet; then " \
+			"setenv bootargs ${bootargs} " \
+				"video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \
+					"if=RGB24; " \
+			"setenv fbmen fbmem=28M; " \
+			"setexpr nextcon ${nextcon} + 1; " \
+		"else " \
+			"echo - no HDMI monitor;" \
+		"fi; " \
+		"i2c dev 1; " \
+		"if i2c probe 0x10; then " \
+			"setenv bootargs ${bootargs} " \
+				"video=mxcfb${nextcon}:dev=lcd,800x480@60," \
+					"if=RGB666; " \
+			"if test 0 -eq ${nextcon}; then " \
+				"setenv fbmem fbmem=10M; " \
+			"else " \
+				"setenv fbmem ${fbmem},10M; " \
+			"fi; " \
+			"setexpr nextcon ${nextcon} + 1; " \
+		"else " \
+			"echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
+		"fi; " \
+		"setenv bootargs ${bootargs} ${fbmem}\0" \
 	"loadbootscript=" \
 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
diff --git a/include/power/ltc3676_pmic.h b/include/power/ltc3676_pmic.h
new file mode 100644
index 0000000..dcaa985
--- /dev/null
+++ b/include/power/ltc3676_pmic.h
@@ -0,0 +1,51 @@
+/*
+ *  Copyright (C) 2014 Gateworks Corporation
+ *  Tim Harvey <tharvey@gateworks.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef __LTC3676_PMIC_H_
+#define __LTC3676_PMIC_H_
+
+/* LTC3676 registers */
+enum {
+	LTC3676_BUCK1	= 0x01,
+	LTC3676_BUCK2	= 0x02,
+	LTC3676_BUCK3	= 0x03,
+	LTC3676_BUCK4	= 0x04,
+	LTC3676_LDOA	= 0x05,
+	LTC3676_LDOB	= 0x06,
+	LTC3676_SQD1	= 0x07,
+	LTC3676_SQD2	= 0x08,
+	LTC3676_CNTRL	= 0x09,
+	LTC3676_DVB1A	= 0x0A,
+	LTC3676_DVB1B	= 0x0B,
+	LTC3676_DVB2A	= 0x0C,
+	LTC3676_DVB2B	= 0x0D,
+	LTC3676_DVB3A	= 0x0E,
+	LTC3676_DVB3B	= 0x0F,
+	LTC3676_DVB4A	= 0x10,
+	LTC3676_DVB4B	= 0x11,
+	LTC3676_MSKIRQ	= 0x12,
+	LTC3676_MSKPG	= 0x13,
+	LTC3676_USER	= 0x14,
+	LTC3676_HRST	= 0x1E,
+	LTC3676_CLIRQ	= 0x1F,
+	LTC3676_IRQSTAT	= 0x15,
+	LTC3676_PGSTATL	= 0x16,
+	LTC3676_PGSTATR	= 0x17,
+	LTC3676_NUM_OF_REGS = 0x20,
+};
+
+/*
+ * SW Configuration
+ */
+
+#define LTC3676_DVB_MASK	0x1f
+#define LTC3676_PGOOD_MASK	(1<<5)
+#define LTC3676_REF_SELA	(0<<5)
+#define LTC3676_REF_SELB	(1<<5)
+
+int power_ltc3676_init(unsigned char bus);
+#endif
diff --git a/include/power/pfuze100_pmic.h b/include/power/pfuze100_pmic.h
index 2a9032a..444aba6 100644
--- a/include/power/pfuze100_pmic.h
+++ b/include/power/pfuze100_pmic.h
@@ -93,4 +93,5 @@ enum {
 #define SWBST_MODE_AUTO	(2 << 2)
 #define SWBST_MODE_APS	(2 << 3)
 
+int power_pfuze100_init(unsigned char bus);
 #endif